From 00452ba9fdb5bf6fb5fea1dae5227b4bbed44fc4 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 12 Aug 2019 12:21:13 +0200 Subject: [PATCH] x86/platform/intel/iosf_mbi Rewrite locking There are 2 problems with the old iosf PMIC I2C bus arbritration code which need to be addressed: 1. The lockdep code complains about a possible deadlock in the iosf_mbi_[un]block_punit_i2c_access code: [ 6.712662] ====================================================== [ 6.712673] WARNING: possible circular locking dependency detected [ 6.712685] 5.3.0-rc2+ #79 Not tainted [ 6.712692] ------------------------------------------------------ [ 6.712702] kworker/0:1/7 is trying to acquire lock: [ 6.712712] 00000000df1c5681 (iosf_mbi_block_punit_i2c_access_count_mutex){+.+.}, at: iosf_mbi_unblock_punit_i2c_access+0x13/0x90 [ 6.712739] but task is already holding lock: [ 6.712749] 0000000067cb23e7 (iosf_mbi_punit_mutex){+.+.}, at: iosf_mbi_block_punit_i2c_access+0x97/0x186 [ 6.712768] which lock already depends on the new lock. [ 6.712780] the existing dependency chain (in reverse order) is: [ 6.712792] -> #1 (iosf_mbi_punit_mutex){+.+.}: [ 6.712808] __mutex_lock+0xa8/0x9a0 [ 6.712818] iosf_mbi_block_punit_i2c_access+0x97/0x186 [ 6.712831] i2c_dw_acquire_lock+0x20/0x30 [ 6.712841] i2c_dw_set_reg_access+0x15/0xb0 [ 6.712851] i2c_dw_probe+0x57/0x473 [ 6.712861] dw_i2c_plat_probe+0x33e/0x640 [ 6.712874] platform_drv_probe+0x38/0x80 [ 6.712884] really_probe+0xf3/0x380 [ 6.712894] driver_probe_device+0x59/0xd0 [ 6.712905] bus_for_each_drv+0x84/0xd0 [ 6.712915] __device_attach+0xe4/0x170 [ 6.712925] bus_probe_device+0x9f/0xb0 [ 6.712935] deferred_probe_work_func+0x79/0xd0 [ 6.712946] process_one_work+0x234/0x560 [ 6.712957] worker_thread+0x50/0x3b0 [ 6.712967] kthread+0x10a/0x140 [ 6.712977] ret_from_fork+0x3a/0x50 [ 6.712986] -> #0 (iosf_mbi_block_punit_i2c_access_count_mutex){+.+.}: [ 6.713004] __lock_acquire+0xe07/0x1930 [ 6.713015] lock_acquire+0x9d/0x1a0 [ 6.713025] __mutex_lock+0xa8/0x9a0 [ 6.713035] iosf_mbi_unblock_punit_i2c_access+0x13/0x90 [ 6.713047] i2c_dw_set_reg_access+0x4d/0xb0 [ 6.713058] i2c_dw_probe+0x57/0x473 [ 6.713068] dw_i2c_plat_probe+0x33e/0x640 [ 6.713079] platform_drv_probe+0x38/0x80 [ 6.713089] really_probe+0xf3/0x380 [ 6.713099] driver_probe_device+0x59/0xd0 [ 6.713109] bus_for_each_drv+0x84/0xd0 [ 6.713119] __device_attach+0xe4/0x170 [ 6.713129] bus_probe_device+0x9f/0xb0 [ 6.713140] deferred_probe_work_func+0x79/0xd0 [ 6.713150] process_one_work+0x234/0x560 [ 6.713160] worker_thread+0x50/0x3b0 [ 6.713170] kthread+0x10a/0x140 [ 6.713180] ret_from_fork+0x3a/0x50 [ 6.713189] other info that might help us debug this: [ 6.713202] Possible unsafe locking scenario: [ 6.713212] CPU0 CPU1 [ 6.713221] ---- ---- [ 6.713229] lock(iosf_mbi_punit_mutex); [ 6.713239] lock(iosf_mbi_block_punit_i2c_access_count_mutex); [ 6.713253] lock(iosf_mbi_punit_mutex); [ 6.713265] lock(iosf_mbi_block_punit_i2c_access_count_mutex); [ 6.713276] *** DEADLOCK *** In practice can never happen because only the first caller which increments iosf_mbi_block_punit_i2c_access_count will also take iosf_mbi_punit_mutex, that is the whole purpose of the counter, which itself is protected by iosf_mbi_block_punit_i2c_access_count_mutex. But there is no way to tell the lockdep code about this and we really want to be able to run a kernel with lockdep enabled without these warnings being triggered. 2. The lockdep warning also points out another real problem, if 2 threads both are in a block of code protected by iosf_mbi_block_punit_i2c_access and the first thread to acquire the block exits before the second thread then the second thread will call mutex_unlock on iosf_mbi_punit_mutex, but it is not the thread which took the mutex and unlocking by another thread is not allowed. Fix this by getting rid of the notion of holding a mutex for the entire duration of the PMIC accesses, be it either from the PUnit side, or from an in kernel I2C driver. In general holding a mutex after exiting a function is a bad idea and the above problems show this case is no different. Instead 2 counters are now used, one for PMIC accesses from the PUnit and one for accesses from in kernel I2C code. When access is requested now the code will wait (using a waitqueue) for the counter of the other type of access to reach 0 and on release, if the counter reaches 0 the wakequeue is woken. Note that the counter approach is necessary to allow nested calls. The main reason for this is so that a series of i2c transfers can be done with the punit blocked from accessing the bus the whole time. This is necessary to be able to safely read/modify/write a PMIC register without racing with the PUNIT doing the same thing. Allowing nested iosf_mbi_block_punit_i2c_access() calls also is desirable from a performance pov since the whole dance necessary to block the PUnit from accessing the PMIC I2C bus is somewhat expensive. Signed-off-by: Hans de Goede Signed-off-by: Thomas Gleixner Reviewed-by: Andy Shevchenko Link: https://lkml.kernel.org/r/20190812102113.95794-1-hdegoede@redhat.com --- arch/x86/platform/intel/iosf_mbi.c | 100 ++++++++++++++++++----------- 1 file changed, 62 insertions(+), 38 deletions(-) diff --git a/arch/x86/platform/intel/iosf_mbi.c b/arch/x86/platform/intel/iosf_mbi.c index 2e796b54cbde..9e2444500428 100644 --- a/arch/x86/platform/intel/iosf_mbi.c +++ b/arch/x86/platform/intel/iosf_mbi.c @@ -17,6 +17,7 @@ #include #include #include +#include #include @@ -201,23 +202,45 @@ EXPORT_SYMBOL(iosf_mbi_available); #define PUNIT_SEMAPHORE_BIT BIT(0) #define PUNIT_SEMAPHORE_ACQUIRE BIT(1) -static DEFINE_MUTEX(iosf_mbi_punit_mutex); -static DEFINE_MUTEX(iosf_mbi_block_punit_i2c_access_count_mutex); +static DEFINE_MUTEX(iosf_mbi_pmic_access_mutex); static BLOCKING_NOTIFIER_HEAD(iosf_mbi_pmic_bus_access_notifier); -static u32 iosf_mbi_block_punit_i2c_access_count; +static DECLARE_WAIT_QUEUE_HEAD(iosf_mbi_pmic_access_waitq); +static u32 iosf_mbi_pmic_punit_access_count; +static u32 iosf_mbi_pmic_i2c_access_count; static u32 iosf_mbi_sem_address; static unsigned long iosf_mbi_sem_acquired; static struct pm_qos_request iosf_mbi_pm_qos; void iosf_mbi_punit_acquire(void) { - mutex_lock(&iosf_mbi_punit_mutex); + /* Wait for any I2C PMIC accesses from in kernel drivers to finish. */ + mutex_lock(&iosf_mbi_pmic_access_mutex); + while (iosf_mbi_pmic_i2c_access_count != 0) { + mutex_unlock(&iosf_mbi_pmic_access_mutex); + wait_event(iosf_mbi_pmic_access_waitq, + iosf_mbi_pmic_i2c_access_count == 0); + mutex_lock(&iosf_mbi_pmic_access_mutex); + } + /* + * We do not need to do anything to allow the PUNIT to safely access + * the PMIC, other then block in kernel accesses to the PMIC. + */ + iosf_mbi_pmic_punit_access_count++; + mutex_unlock(&iosf_mbi_pmic_access_mutex); } EXPORT_SYMBOL(iosf_mbi_punit_acquire); void iosf_mbi_punit_release(void) { - mutex_unlock(&iosf_mbi_punit_mutex); + bool do_wakeup; + + mutex_lock(&iosf_mbi_pmic_access_mutex); + iosf_mbi_pmic_punit_access_count--; + do_wakeup = iosf_mbi_pmic_punit_access_count == 0; + mutex_unlock(&iosf_mbi_pmic_access_mutex); + + if (do_wakeup) + wake_up(&iosf_mbi_pmic_access_waitq); } EXPORT_SYMBOL(iosf_mbi_punit_release); @@ -256,34 +279,32 @@ static void iosf_mbi_reset_semaphore(void) * already blocked P-Unit accesses because it wants them blocked over multiple * i2c-transfers, for e.g. read-modify-write of an I2C client register. * - * The P-Unit accesses already being blocked is tracked through the - * iosf_mbi_block_punit_i2c_access_count variable which is protected by the - * iosf_mbi_block_punit_i2c_access_count_mutex this mutex is hold for the - * entire duration of the function. - * - * If access is not blocked yet, this function takes the following steps: + * To allow safe PMIC i2c bus accesses this function takes the following steps: * * 1) Some code sends request to the P-Unit which make it access the PMIC * I2C bus. Testing has shown that the P-Unit does not check its internal * PMIC bus semaphore for these requests. Callers of these requests call * iosf_mbi_punit_acquire()/_release() around their P-Unit accesses, these - * functions lock/unlock the iosf_mbi_punit_mutex. - * As the first step we lock the iosf_mbi_punit_mutex, to wait for any in - * flight requests to finish and to block any new requests. + * functions increase/decrease iosf_mbi_pmic_punit_access_count, so first + * we wait for iosf_mbi_pmic_punit_access_count to become 0. * - * 2) Some code makes such P-Unit requests from atomic contexts where it + * 2) Check iosf_mbi_pmic_i2c_access_count, if access has already + * been blocked by another caller, we only need to increment + * iosf_mbi_pmic_i2c_access_count and we can skip the other steps. + * + * 3) Some code makes such P-Unit requests from atomic contexts where it * cannot call iosf_mbi_punit_acquire() as that may sleep. * As the second step we call a notifier chain which allows any code * needing P-Unit resources from atomic context to acquire them before * we take control over the PMIC I2C bus. * - * 3) When CPU cores enter C6 or C7 the P-Unit needs to talk to the PMIC + * 4) When CPU cores enter C6 or C7 the P-Unit needs to talk to the PMIC * if this happens while the kernel itself is accessing the PMIC I2C bus * the SoC hangs. * As the third step we call pm_qos_update_request() to disallow the CPU * to enter C6 or C7. * - * 4) The P-Unit has a PMIC bus semaphore which we can request to stop + * 5) The P-Unit has a PMIC bus semaphore which we can request to stop * autonomous P-Unit tasks from accessing the PMIC I2C bus while we hold it. * As the fourth and final step we request this semaphore and wait for our * request to be acknowledged. @@ -297,12 +318,18 @@ int iosf_mbi_block_punit_i2c_access(void) if (WARN_ON(!mbi_pdev || !iosf_mbi_sem_address)) return -ENXIO; - mutex_lock(&iosf_mbi_block_punit_i2c_access_count_mutex); + mutex_lock(&iosf_mbi_pmic_access_mutex); - if (iosf_mbi_block_punit_i2c_access_count > 0) + while (iosf_mbi_pmic_punit_access_count != 0) { + mutex_unlock(&iosf_mbi_pmic_access_mutex); + wait_event(iosf_mbi_pmic_access_waitq, + iosf_mbi_pmic_punit_access_count == 0); + mutex_lock(&iosf_mbi_pmic_access_mutex); + } + + if (iosf_mbi_pmic_i2c_access_count > 0) goto success; - mutex_lock(&iosf_mbi_punit_mutex); blocking_notifier_call_chain(&iosf_mbi_pmic_bus_access_notifier, MBI_PMIC_BUS_ACCESS_BEGIN, NULL); @@ -330,10 +357,6 @@ int iosf_mbi_block_punit_i2c_access(void) iosf_mbi_sem_acquired = jiffies; dev_dbg(&mbi_pdev->dev, "P-Unit semaphore acquired after %ums\n", jiffies_to_msecs(jiffies - start)); - /* - * Success, keep iosf_mbi_punit_mutex locked till - * iosf_mbi_unblock_punit_i2c_access() gets called. - */ goto success; } @@ -344,15 +367,13 @@ int iosf_mbi_block_punit_i2c_access(void) dev_err(&mbi_pdev->dev, "Error P-Unit semaphore timed out, resetting\n"); error: iosf_mbi_reset_semaphore(); - mutex_unlock(&iosf_mbi_punit_mutex); - if (!iosf_mbi_get_sem(&sem)) dev_err(&mbi_pdev->dev, "P-Unit semaphore: %d\n", sem); success: if (!WARN_ON(ret)) - iosf_mbi_block_punit_i2c_access_count++; + iosf_mbi_pmic_i2c_access_count++; - mutex_unlock(&iosf_mbi_block_punit_i2c_access_count_mutex); + mutex_unlock(&iosf_mbi_pmic_access_mutex); return ret; } @@ -360,17 +381,20 @@ EXPORT_SYMBOL(iosf_mbi_block_punit_i2c_access); void iosf_mbi_unblock_punit_i2c_access(void) { - mutex_lock(&iosf_mbi_block_punit_i2c_access_count_mutex); + bool do_wakeup = false; - iosf_mbi_block_punit_i2c_access_count--; - if (iosf_mbi_block_punit_i2c_access_count == 0) { + mutex_lock(&iosf_mbi_pmic_access_mutex); + iosf_mbi_pmic_i2c_access_count--; + if (iosf_mbi_pmic_i2c_access_count == 0) { iosf_mbi_reset_semaphore(); - mutex_unlock(&iosf_mbi_punit_mutex); dev_dbg(&mbi_pdev->dev, "punit semaphore held for %ums\n", jiffies_to_msecs(jiffies - iosf_mbi_sem_acquired)); + do_wakeup = true; } + mutex_unlock(&iosf_mbi_pmic_access_mutex); - mutex_unlock(&iosf_mbi_block_punit_i2c_access_count_mutex); + if (do_wakeup) + wake_up(&iosf_mbi_pmic_access_waitq); } EXPORT_SYMBOL(iosf_mbi_unblock_punit_i2c_access); @@ -379,10 +403,10 @@ int iosf_mbi_register_pmic_bus_access_notifier(struct notifier_block *nb) int ret; /* Wait for the bus to go inactive before registering */ - mutex_lock(&iosf_mbi_punit_mutex); + iosf_mbi_punit_acquire(); ret = blocking_notifier_chain_register( &iosf_mbi_pmic_bus_access_notifier, nb); - mutex_unlock(&iosf_mbi_punit_mutex); + iosf_mbi_punit_release(); return ret; } @@ -403,9 +427,9 @@ int iosf_mbi_unregister_pmic_bus_access_notifier(struct notifier_block *nb) int ret; /* Wait for the bus to go inactive before unregistering */ - mutex_lock(&iosf_mbi_punit_mutex); + iosf_mbi_punit_acquire(); ret = iosf_mbi_unregister_pmic_bus_access_notifier_unlocked(nb); - mutex_unlock(&iosf_mbi_punit_mutex); + iosf_mbi_punit_release(); return ret; } @@ -413,7 +437,7 @@ EXPORT_SYMBOL(iosf_mbi_unregister_pmic_bus_access_notifier); void iosf_mbi_assert_punit_acquired(void) { - WARN_ON(!mutex_is_locked(&iosf_mbi_punit_mutex)); + WARN_ON(iosf_mbi_pmic_punit_access_count == 0); } EXPORT_SYMBOL(iosf_mbi_assert_punit_acquired);