UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/arch/powerpc/kernel/misc_64.S

724 lines
15 KiB
ArmAsm
Raw Normal View History

powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:36:14 +08:00
/*
* This file contains miscellaneous low-level functions.
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
*
* Largely rewritten by Cort Dougan (cort@cs.nmt.edu)
* and Paul Mackerras.
* Adapted for iSeries by Mike Corrigan (mikejc@us.ibm.com)
[POWERPC] Consolidate some of kernel/misc*.S There were some common functions (mainly i/o). Also some small white space cleanups and remove a couple of small unused functions. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-28 09:55:49 +08:00
* PPC64 updates by Dave Engebretsen (engebret@us.ibm.com)
*
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:36:14 +08:00
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
*/
#include <linux/sys.h>
#include <asm/unistd.h>
#include <asm/errno.h>
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/cache.h>
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
#include <asm/cputable.h>
[PATCH] powerpc: Merge thread_info.h Merge ppc32 and ppc64 versions of thread_info.h. They were pretty similar already, the chief changes are: - Instead of inline asm to implement current_thread_info(), which needs to be different for ppc32 and ppc64, we use C with an asm("r1") register variable. gcc turns it into the same asm as we used to have for both platforms. - We replace ppc32's 'local_flags' with the ppc64 'syscall_noerror' field. The noerror flag was in fact the only thing in the local_flags field anyway, so the ppc64 approach is simpler, and means we only need a load-immediate/store instead of load/mask/store when clearing the flag. - In readiness for 64k pages, when THREAD_SIZE will be less than a page, ppc64 used kmalloc() rather than get_free_pages() to allocate the kernel stack. With this patch we do the same for ppc32, since there's no strong reason not to. - For ppc64, we no longer export THREAD_SHIFT and THREAD_SIZE via asm-offsets, thread_info.h can now be safely included in asm, as on ppc32. Built and booted on G4 Powerbook (ARCH=ppc and ARCH=powerpc) and Power5 (ARCH=ppc64 and ARCH=powerpc). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-21 13:45:50 +08:00
#include <asm/thread_info.h>
powerpc/kexec: Fix race in kexec shutdown In kexec_prepare_cpus, the primary CPU IPIs the secondary CPUs to kexec_smp_down(). kexec_smp_down() calls kexec_smp_wait() which sets the hw_cpu_id() to -1. The primary does this while leaving IRQs on which means the primary can take a timer interrupt which can lead to the IPIing one of the secondary CPUs (say, for a scheduler re-balance) but since the secondary CPU now has a hw_cpu_id = -1, we IPI CPU -1... Kaboom! We are hitting this case regularly on POWER7 machines. There is also a second race, where the primary will tear down the MMU mappings before knowing the secondaries have entered real mode. Also, the secondaries are clearing out any pending IPIs before guaranteeing that no more will be received. This changes kexec_prepare_cpus() so that we turn off IRQs in the primary CPU much earlier. It adds a paca flag to say that the secondaries have entered the kexec_smp_down() IPI and turned off IRQs, rather than overloading hw_cpu_id with -1. This new paca flag is again used to in indicate when the secondaries has entered real mode. It also ensures that all CPUs have their IRQs off before we clear out any pending IPI requests (in kexec_cpu_down()) to ensure there are no trailing IPIs left unacknowledged. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-14 03:40:11 +08:00
#include <asm/kexec.h>
powerpc: Remove second definition of STACK_FRAME_OVERHEAD Since STACK_FRAME_OVERHEAD is defined in asm/ptrace.h and that is ASSEMBER safe, we can just include that instead of going via asm-offsets.h. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-11-18 23:06:17 +08:00
#include <asm/ptrace.h>
powerpc/book3e-64/kexec: create an identity TLB mapping book3e has no real MMU mode so we have to create an identity TLB mapping to make sure we can access the real physical address. Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com> [scottwood: cleanup, and split off some changes] Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-10-07 11:48:18 +08:00
#include <asm/mmu.h>
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:36:14 +08:00
.text
_GLOBAL(call_do_softirq)
mflr r0
std r0,16(r1)
[POWERPC] Clean up misc_64.S * Removed get_msr(), get_srr0(), and get_srr1() - not used anywhere * Use STACK_FRAME_OVERHEAD instead of magic number Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24 11:20:16 +08:00
stdu r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r3)
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:36:14 +08:00
mr r1,r3
powerpc: No need to use dot symbols when branching to a function binutils is smart enough to know that a branch to a function descriptor is actually a branch to the functions text address. Alan tells me that binutils has been doing this for 9 years. Signed-off-by: Anton Blanchard <anton@samba.org>
2014-02-04 13:04:35 +08:00
bl __do_softirq
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:36:14 +08:00
ld r1,0(r1)
ld r0,16(r1)
mtlr r0
blr
powerpc/irq: Run softirqs off the top of the irq stack Nowadays, irq_exit() calls __do_softirq() pretty much directly instead of calling do_softirq() which switches to the decicated softirq stack. This has lead to observed stack overflows on powerpc since we call irq_enter() and irq_exit() outside of the scope that switches to the irq stack. This fixes it by moving the stack switching up a level, making irq_enter() and irq_exit() run off the irq stack. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-09-23 12:29:11 +08:00
_GLOBAL(call_do_irq)
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:36:14 +08:00
mflr r0
std r0,16(r1)
powerpc/irq: Run softirqs off the top of the irq stack Nowadays, irq_exit() calls __do_softirq() pretty much directly instead of calling do_softirq() which switches to the decicated softirq stack. This has lead to observed stack overflows on powerpc since we call irq_enter() and irq_exit() outside of the scope that switches to the irq stack. This fixes it by moving the stack switching up a level, making irq_enter() and irq_exit() run off the irq stack. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-09-23 12:29:11 +08:00
stdu r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r4)
mr r1,r4
powerpc: No need to use dot symbols when branching to a function binutils is smart enough to know that a branch to a function descriptor is actually a branch to the functions text address. Alan tells me that binutils has been doing this for 9 years. Signed-off-by: Anton Blanchard <anton@samba.org>
2014-02-04 13:04:35 +08:00
bl __do_irq
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:36:14 +08:00
ld r1,0(r1)
ld r0,16(r1)
mtlr r0
blr
.section ".toc","aw"
PPC64_CACHES:
.tc ppc64_caches[TC],ppc64_caches
.section ".text"
/*
* Write any modified data cache blocks out to memory
* and invalidate the corresponding instruction cache blocks.
*
* flush_icache_range(unsigned long start, unsigned long stop)
*
* flush all bytes from start through stop-1 inclusive
*/
powerpc: Remove the symbol __flush_icache_range And now the function flush_icache_range() is just a wrapper which only invoke the function __flush_icache_range() directly. So we don't have reason to keep it anymore. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-06 18:23:31 +08:00
_KPROBE(flush_icache_range)
powerpc: Move the testing of CPU_FTR_COHERENT_ICACHE into __flush_icache_range In function flush_icache_range(), we use cpu_has_feature() to test the feature bit of CPU_FTR_COHERENT_ICACHE. But this seems not optimal for two reasons: a) For ppc32, the function __flush_icache_range() already do this check with the macro END_FTR_SECTION_IFSET. b) Compare with the cpu_has_feature(), the method of using macro END_FTR_SECTION_IFSET will not introduce any runtime overhead. [And while at it, add the missing required isync] -- BenH Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-06 18:23:30 +08:00
BEGIN_FTR_SECTION
powerpc: purge all the prefetched instructions for the coherent icache flush As Benjamin Herrenschmidt has indicated, we still need a dummy icbi to purge all the prefetched instructions from the ifetch buffers for the snooping icache. We also need a sync before the icbi to order the actual stores to memory that might have modified instructions with the icbi. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-22 09:30:35 +08:00
PURGE_PREFETCHED_INS
powerpc: Move the testing of CPU_FTR_COHERENT_ICACHE into __flush_icache_range In function flush_icache_range(), we use cpu_has_feature() to test the feature bit of CPU_FTR_COHERENT_ICACHE. But this seems not optimal for two reasons: a) For ppc32, the function __flush_icache_range() already do this check with the macro END_FTR_SECTION_IFSET. b) Compare with the cpu_has_feature(), the method of using macro END_FTR_SECTION_IFSET will not introduce any runtime overhead. [And while at it, add the missing required isync] -- BenH Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-06 18:23:30 +08:00
blr
END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:36:14 +08:00
/*
* Flush the data cache to memory
*
* Different systems have different cache line sizes
* and in some cases i-cache and d-cache line sizes differ from
* each other.
*/
ld r10,PPC64_CACHES@toc(r2)
lwz r7,DCACHEL1LINESIZE(r10)/* Get cache line size */
addi r5,r7,-1
andc r6,r3,r5 /* round low to line bdy */
subf r8,r6,r4 /* compute length */
add r8,r8,r5 /* ensure we get enough */
lwz r9,DCACHEL1LOGLINESIZE(r10) /* Get log-2 of cache line size */
srw. r8,r8,r9 /* compute line count */
beqlr /* nothing to do? */
mtctr r8
1: dcbst 0,r6
add r6,r6,r7
bdnz 1b
sync
/* Now invalidate the instruction cache */
lwz r7,ICACHEL1LINESIZE(r10) /* Get Icache line size */
addi r5,r7,-1
andc r6,r3,r5 /* round low to line bdy */
subf r8,r6,r4 /* compute length */
add r8,r8,r5
lwz r9,ICACHEL1LOGLINESIZE(r10) /* Get log-2 of Icache line size */
srw. r8,r8,r9 /* compute line count */
beqlr /* nothing to do? */
mtctr r8
2: icbi 0,r6
add r6,r6,r7
bdnz 2b
isync
blr
.previous .text
/*
* Like above, but only do the D-cache.
*
* flush_dcache_range(unsigned long start, unsigned long stop)
*
* flush all bytes from start to stop-1 inclusive
*/
_GLOBAL(flush_dcache_range)
/*
* Flush the data cache to memory
*
* Different systems have different cache line sizes
*/
ld r10,PPC64_CACHES@toc(r2)
lwz r7,DCACHEL1LINESIZE(r10) /* Get dcache line size */
addi r5,r7,-1
andc r6,r3,r5 /* round low to line bdy */
subf r8,r6,r4 /* compute length */
add r8,r8,r5 /* ensure we get enough */
lwz r9,DCACHEL1LOGLINESIZE(r10) /* Get log-2 of dcache line size */
srw. r8,r8,r9 /* compute line count */
beqlr /* nothing to do? */
mtctr r8
0: dcbst 0,r6
add r6,r6,r7
bdnz 0b
sync
blr
/*
* Like above, but works on non-mapped physical addresses.
* Use only for non-LPAR setups ! It also assumes real mode
* is cacheable. Used for flushing out the DART before using
* it as uncacheable memory
*
* flush_dcache_phys_range(unsigned long start, unsigned long stop)
*
* flush all bytes from start to stop-1 inclusive
*/
_GLOBAL(flush_dcache_phys_range)
ld r10,PPC64_CACHES@toc(r2)
lwz r7,DCACHEL1LINESIZE(r10) /* Get dcache line size */
addi r5,r7,-1
andc r6,r3,r5 /* round low to line bdy */
subf r8,r6,r4 /* compute length */
add r8,r8,r5 /* ensure we get enough */
lwz r9,DCACHEL1LOGLINESIZE(r10) /* Get log-2 of dcache line size */
srw. r8,r8,r9 /* compute line count */
beqlr /* nothing to do? */
mfmsr r5 /* Disable MMU Data Relocation */
ori r0,r5,MSR_DR
xori r0,r0,MSR_DR
sync
mtmsr r0
sync
isync
mtctr r8
0: dcbst 0,r6
add r6,r6,r7
bdnz 0b
sync
isync
mtmsr r5 /* Re-enable MMU Data Relocation */
sync
isync
blr
_GLOBAL(flush_inval_dcache_range)
ld r10,PPC64_CACHES@toc(r2)
lwz r7,DCACHEL1LINESIZE(r10) /* Get dcache line size */
addi r5,r7,-1
andc r6,r3,r5 /* round low to line bdy */
subf r8,r6,r4 /* compute length */
add r8,r8,r5 /* ensure we get enough */
lwz r9,DCACHEL1LOGLINESIZE(r10)/* Get log-2 of dcache line size */
srw. r8,r8,r9 /* compute line count */
beqlr /* nothing to do? */
sync
isync
mtctr r8
0: dcbf 0,r6
add r6,r6,r7
bdnz 0b
sync
isync
blr
/*
* Flush a particular page from the data cache to RAM.
* Note: this is necessary because the instruction cache does *not*
* snoop from the data cache.
*
* void __flush_dcache_icache(void *page)
*/
_GLOBAL(__flush_dcache_icache)
/*
* Flush the data cache to memory
*
* Different systems have different cache line sizes
*/
powerpc: purge all the prefetched instructions for the coherent icache flush As Benjamin Herrenschmidt has indicated, we still need a dummy icbi to purge all the prefetched instructions from the ifetch buffers for the snooping icache. We also need a sync before the icbi to order the actual stores to memory that might have modified instructions with the icbi. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-08-22 09:30:35 +08:00
BEGIN_FTR_SECTION
PURGE_PREFETCHED_INS
blr
END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:36:14 +08:00
/* Flush the dcache */
ld r7,PPC64_CACHES@toc(r2)
clrrdi r3,r3,PAGE_SHIFT /* Page align */
lwz r4,DCACHEL1LINESPERPAGE(r7) /* Get # dcache lines per page */
lwz r5,DCACHEL1LINESIZE(r7) /* Get dcache line size */
mr r6,r3
mtctr r4
0: dcbst 0,r6
add r6,r6,r5
bdnz 0b
sync
/* Now invalidate the icache */
lwz r4,ICACHEL1LINESPERPAGE(r7) /* Get # icache lines per page */
lwz r5,ICACHEL1LINESIZE(r7) /* Get icache line size */
mtctr r4
1: icbi 0,r3
add r3,r3,r5
bdnz 1b
isync
blr
powerpc: Provide __bswapdi2 Some versions of GCC apparently expect this to be provided by libgcc. Updates from Mikey to fix 32 bit version and adding "r" to registers. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-05-13 08:23:38 +08:00
_GLOBAL(__bswapdi2)
srdi r8,r3,32
rlwinm r7,r3,8,0xffffffff
rlwimi r7,r3,24,0,7
rlwinm r9,r8,8,0xffffffff
rlwimi r7,r3,24,16,23
rlwimi r9,r8,24,0,7
rlwimi r9,r8,24,16,23
sldi r7,r7,32
or r3,r7,r9
blr
[POWERPC] implement BEGIN/END_FW_FTR_SECTION and use it an all the obvious places in assembler code. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2006-09-25 16:19:00 +08:00
powerpc/pmac: Early debug output on screen on 64-bit macs We have a bunch of CONFIG_PPC_EARLY_DEBUG_* options that are intended for bringup/debug only. They hard wire a machine specific udbg backend very early on (before we even probe the platform), and use whatever tricks are available on each machine/cpu to be able to get some kind of output out there early on. So far, on powermac with no serial ports, we have CONFIG_PPC_EARLY_DEBUG_BOOTX to use the low-level btext engine on the screen, but it doesn't do much, at least on 64-bit. It only really gets enabled after the platform has been probed and the MMU enabled. This adds a way to enable it much earlier. From prom_init.c (while still running with Open Firmware), we grab the screen details and set things up using the physical address of the frame buffer. Then btext itself uses the "rm_ci" feature of the 970 processor (Real Mode Cache Inhibited) to access it while in real mode. We need to do a little bit of reorg of the btext code to inline things better, in order to limit how much we touch memory while in this mode as the consequences might be ... interesting. This successfully allowed me to debug problems early on with the G5 (related to gold being broken vs. ppc64 kernels). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-25 10:12:32 +08:00
powerpc: Fix build break with PPC_EARLY_DEBUG_BOOTX=y A kernel configured with PPC_EARLY_DEBUG_BOOTX=y but PPC_PMAC=n and PPC_MAPLE=n will fail to link: btext.c:(.text+0x2d0fc): undefined reference to `.rmci_off' btext.c:(.text+0x2d214): undefined reference to `.rmci_on' Fix it by making the build of rmci_on/off() depend on PPC_EARLY_DEBUG_BOOTX, which also enable the only code that uses them. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-29 11:55:22 +08:00
#ifdef CONFIG_PPC_EARLY_DEBUG_BOOTX
powerpc/pmac: Early debug output on screen on 64-bit macs We have a bunch of CONFIG_PPC_EARLY_DEBUG_* options that are intended for bringup/debug only. They hard wire a machine specific udbg backend very early on (before we even probe the platform), and use whatever tricks are available on each machine/cpu to be able to get some kind of output out there early on. So far, on powermac with no serial ports, we have CONFIG_PPC_EARLY_DEBUG_BOOTX to use the low-level btext engine on the screen, but it doesn't do much, at least on 64-bit. It only really gets enabled after the platform has been probed and the MMU enabled. This adds a way to enable it much earlier. From prom_init.c (while still running with Open Firmware), we grab the screen details and set things up using the physical address of the frame buffer. Then btext itself uses the "rm_ci" feature of the 970 processor (Real Mode Cache Inhibited) to access it while in real mode. We need to do a little bit of reorg of the btext code to inline things better, in order to limit how much we touch memory while in this mode as the consequences might be ... interesting. This successfully allowed me to debug problems early on with the G5 (related to gold being broken vs. ppc64 kernels). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-25 10:12:32 +08:00
_GLOBAL(rmci_on)
sync
isync
li r3,0x100
rldicl r3,r3,32,0
mfspr r5,SPRN_HID4
or r5,r5,r3
sync
mtspr SPRN_HID4,r5
isync
slbia
isync
sync
blr
_GLOBAL(rmci_off)
sync
isync
li r3,0x100
rldicl r3,r3,32,0
mfspr r5,SPRN_HID4
andc r5,r5,r3
sync
mtspr SPRN_HID4,r5
isync
slbia
isync
sync
blr
powerpc: Fix build break with PPC_EARLY_DEBUG_BOOTX=y A kernel configured with PPC_EARLY_DEBUG_BOOTX=y but PPC_PMAC=n and PPC_MAPLE=n will fail to link: btext.c:(.text+0x2d0fc): undefined reference to `.rmci_off' btext.c:(.text+0x2d214): undefined reference to `.rmci_on' Fix it by making the build of rmci_on/off() depend on PPC_EARLY_DEBUG_BOOTX, which also enable the only code that uses them. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-11-29 11:55:22 +08:00
#endif /* CONFIG_PPC_EARLY_DEBUG_BOOTX */
#if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE)
powerpc/pmac: Early debug output on screen on 64-bit macs We have a bunch of CONFIG_PPC_EARLY_DEBUG_* options that are intended for bringup/debug only. They hard wire a machine specific udbg backend very early on (before we even probe the platform), and use whatever tricks are available on each machine/cpu to be able to get some kind of output out there early on. So far, on powermac with no serial ports, we have CONFIG_PPC_EARLY_DEBUG_BOOTX to use the low-level btext engine on the screen, but it doesn't do much, at least on 64-bit. It only really gets enabled after the platform has been probed and the MMU enabled. This adds a way to enable it much earlier. From prom_init.c (while still running with Open Firmware), we grab the screen details and set things up using the physical address of the frame buffer. Then btext itself uses the "rm_ci" feature of the 970 processor (Real Mode Cache Inhibited) to access it while in real mode. We need to do a little bit of reorg of the btext code to inline things better, in order to limit how much we touch memory while in this mode as the consequences might be ... interesting. This successfully allowed me to debug problems early on with the G5 (related to gold being broken vs. ppc64 kernels). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-25 10:12:32 +08:00
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:36:14 +08:00
/*
* Do an IO access in real mode
*/
_GLOBAL(real_readb)
mfmsr r7
ori r0,r7,MSR_DR
xori r0,r0,MSR_DR
sync
mtmsrd r0
sync
isync
mfspr r6,SPRN_HID4
rldicl r5,r6,32,0
ori r5,r5,0x100
rldicl r5,r5,32,0
sync
mtspr SPRN_HID4,r5
isync
slbia
isync
lbz r3,0(r3)
sync
mtspr SPRN_HID4,r6
isync
slbia
isync
mtmsrd r7
sync
isync
blr
/*
* Do an IO access in real mode
*/
_GLOBAL(real_writeb)
mfmsr r7
ori r0,r7,MSR_DR
xori r0,r0,MSR_DR
sync
mtmsrd r0
sync
isync
mfspr r6,SPRN_HID4
rldicl r5,r6,32,0
ori r5,r5,0x100
rldicl r5,r5,32,0
sync
mtspr SPRN_HID4,r5
isync
slbia
isync
stb r3,0(r4)
sync
mtspr SPRN_HID4,r6
isync
slbia
isync
mtmsrd r7
sync
isync
blr
#endif /* defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE) */
[POWERPC] pasemi: UART udbg support Early debug output for PA Semi UART. Uses the 2.05 CI real mode ops. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-05 06:36:49 +08:00
#ifdef CONFIG_PPC_PASEMI
_GLOBAL(real_205_readb)
mfmsr r7
ori r0,r7,MSR_DR
xori r0,r0,MSR_DR
sync
mtmsrd r0
sync
isync
powerpc: Fixes for instructions not using correct register naming These macros are using integers where they could be using logical names since they take registers. We are going to enforce this soon, so fix these up now. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-06-25 21:33:18 +08:00
LBZCIX(R3,R0,R3)
[POWERPC] pasemi: UART udbg support Early debug output for PA Semi UART. Uses the 2.05 CI real mode ops. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-05 06:36:49 +08:00
isync
mtmsrd r7
sync
isync
blr
_GLOBAL(real_205_writeb)
mfmsr r7
ori r0,r7,MSR_DR
xori r0,r0,MSR_DR
sync
mtmsrd r0
sync
isync
powerpc: Fixes for instructions not using correct register naming These macros are using integers where they could be using logical names since they take registers. We are going to enforce this soon, so fix these up now. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-06-25 21:33:18 +08:00
STBCIX(R3,R0,R4)
[POWERPC] pasemi: UART udbg support Early debug output for PA Semi UART. Uses the 2.05 CI real mode ops. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-05 06:36:49 +08:00
isync
mtmsrd r7
sync
isync
blr
#endif /* CONFIG_PPC_PASEMI */
powerpc/maple: Enable scom access functions on Maple Enable functions used to access SCOM if PPC_MAPLE is defined: they are used by cpufreq driver to control hardware. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-06-17 11:10:06 +08:00
#if defined(CONFIG_CPU_FREQ_PMAC64) || defined(CONFIG_CPU_FREQ_MAPLE)
[PATCH] ppc64: SMU based macs cpufreq support CPU freq support using 970FX powertune facility for iMac G5 and SMU based single CPU desktop. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-07 11:27:33 +08:00
/*
* SCOM access functions for 970 (FX only for now)
*
* unsigned long scom970_read(unsigned int address);
* void scom970_write(unsigned int address, unsigned long value);
*
* The address passed in is the 24 bits register address. This code
* is 970 specific and will not check the status bits, so you should
* know what you are doing.
*/
_GLOBAL(scom970_read)
/* interrupts off */
mfmsr r4
ori r0,r4,MSR_EE
xori r0,r0,MSR_EE
mtmsrd r0,1
/* rotate 24 bits SCOM address 8 bits left and mask out it's low 8 bits
* (including parity). On current CPUs they must be 0'd,
* and finally or in RW bit
*/
rlwinm r3,r3,8,0,15
ori r3,r3,0x8000
/* do the actual scom read */
sync
mtspr SPRN_SCOMC,r3
isync
mfspr r3,SPRN_SCOMD
isync
mfspr r0,SPRN_SCOMC
isync
/* XXX: fixup result on some buggy 970's (ouch ! we lost a bit, bah
* that's the best we can do). Not implemented yet as we don't use
* the scom on any of the bogus CPUs yet, but may have to be done
* ultimately
*/
/* restore interrupts */
mtmsrd r4,1
blr
_GLOBAL(scom970_write)
/* interrupts off */
mfmsr r5
ori r0,r5,MSR_EE
xori r0,r0,MSR_EE
mtmsrd r0,1
/* rotate 24 bits SCOM address 8 bits left and mask out it's low 8 bits
* (including parity). On current CPUs they must be 0'd.
*/
rlwinm r3,r3,8,0,15
sync
mtspr SPRN_SCOMD,r4 /* write data */
isync
mtspr SPRN_SCOMC,r3 /* write command */
isync
mfspr 3,SPRN_SCOMC
isync
/* restore interrupts */
mtmsrd r5,1
blr
powerpc/maple: Enable scom access functions on Maple Enable functions used to access SCOM if PPC_MAPLE is defined: they are used by cpufreq driver to control hardware. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-06-17 11:10:06 +08:00
#endif /* CONFIG_CPU_FREQ_PMAC64 || CONFIG_CPU_FREQ_MAPLE */
[PATCH] ppc64: SMU based macs cpufreq support CPU freq support using 970FX powertune facility for iMac G5 and SMU based single CPU desktop. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-07 11:27:33 +08:00
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:36:14 +08:00
/* kexec_wait(phys_cpu)
*
* wait for the flag to change, indicating this kernel is going away but
* the slave code for the next one is at addresses 0 to 100.
*
powerpc/kexec: Fix memory corruption from unallocated slaves Commit 1fc711f7ffb01089efc58042cfdbac8573d1b59a (powerpc/kexec: Fix race in kexec shutdown) moved the write to signal the cpu had exited the kernel from before the transition to real mode in kexec_smp_wait to kexec_wait. Unfornately it missed that kexec_wait is used both by cpus leaving the kernel and by secondary slave cpus that were not allocated a paca for what ever reason -- they could be beyond nr_cpus or not described in the current device tree for whatever reason (for example, kexec-load was not refreshed after a cpu hotplug operation). Cpus coming through that path they will write to paca[NR_CPUS] which is beyond the space allocated for the paca data and overwrite memory not allocated to pacas but very likely still real mode accessable). Move the write back to kexec_smp_wait, which is used only by cpus that found their paca, but after the transition to real mode. Signed-off-by: Milton Miller <miltonm@bga.com> Cc: <stable@kernel.org> # (1fc711f was backported to 2.6.32) Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-11 03:28:33 +08:00
* This is used by all slaves, even those that did not find a matching
* paca in the secondary startup code.
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:36:14 +08:00
*
* Physical (hardware) cpu id should be in r3.
*/
_GLOBAL(kexec_wait)
bl 1f
1: mflr r5
addi r5,r5,kexec_flag-1b
99: HMT_LOW
#ifdef CONFIG_KEXEC /* use no memory without kexec */
lwz r4,0(r5)
cmpwi 0,r4,0
powerpc/kexec: Reset secondary cpu endianness before kexec If the target kernel does not inlcude the FIXUP_ENDIAN check, coming from a different-endian kernel will cause the target kernel to panic. All ppc64 kernels can handle starting in big-endian mode, so return to big-endian before branching into the target kernel. This mainly affects pseries as secondaries on powernv are returned to OPAL. Signed-off-by: Samuel Mendoza-Jonas <sam.mj@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-07-22 13:50:50 +08:00
beq 99b
#ifdef CONFIG_PPC_BOOK3S_64
li r10,0x60
mfmsr r11
clrrdi r11,r11,1 /* Clear MSR_LE */
mtsrr0 r10
mtsrr1 r11
rfid
#else
ba 0x60
#endif
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:36:14 +08:00
#endif
/* this can be in text because we won't change it until we are
* running in real anyways
*/
kexec_flag:
.long 0
#ifdef CONFIG_KEXEC
powerpc/book3e-64/kexec: create an identity TLB mapping book3e has no real MMU mode so we have to create an identity TLB mapping to make sure we can access the real physical address. Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com> [scottwood: cleanup, and split off some changes] Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-10-07 11:48:18 +08:00
#ifdef CONFIG_PPC_BOOK3E
/*
* BOOK3E has no real MMU mode, so we have to setup the initial TLB
* for a core to identity map v:0 to p:0. This current implementation
* assumes that 1G is enough for kexec.
*/
kexec_create_tlb:
/*
* Invalidate all non-IPROT TLB entries to avoid any TLB conflict.
* IPROT TLB entries should be >= PAGE_OFFSET and thus not conflict.
*/
PPC_TLBILX_ALL(0,R0)
sync
isync
mfspr r10,SPRN_TLB1CFG
andi. r10,r10,TLBnCFG_N_ENTRY /* Extract # entries */
subi r10,r10,1 /* Last entry: no conflict with kernel text */
lis r9,MAS0_TLBSEL(1)@h
rlwimi r9,r10,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r9) */
/* Set up a temp identity mapping v:0 to p:0 and return to it. */
#if defined(CONFIG_SMP) || defined(CONFIG_PPC_E500MC)
#define M_IF_NEEDED MAS2_M
#else
#define M_IF_NEEDED 0
#endif
mtspr SPRN_MAS0,r9
lis r9,(MAS1_VALID|MAS1_IPROT)@h
ori r9,r9,(MAS1_TSIZE(BOOK3E_PAGESZ_1GB))@l
mtspr SPRN_MAS1,r9
LOAD_REG_IMMEDIATE(r9, 0x0 | M_IF_NEEDED)
mtspr SPRN_MAS2,r9
LOAD_REG_IMMEDIATE(r9, 0x0 | MAS3_SR | MAS3_SW | MAS3_SX)
mtspr SPRN_MAS3,r9
li r9,0
mtspr SPRN_MAS7,r9
tlbwe
isync
blr
#endif
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:36:14 +08:00
/* kexec_smp_wait(void)
*
* call with interrupts off
* note: this is a terminal routine, it does not save lr
*
* get phys id from paca
* switch to real mode
powerpc/kexec: Fix memory corruption from unallocated slaves Commit 1fc711f7ffb01089efc58042cfdbac8573d1b59a (powerpc/kexec: Fix race in kexec shutdown) moved the write to signal the cpu had exited the kernel from before the transition to real mode in kexec_smp_wait to kexec_wait. Unfornately it missed that kexec_wait is used both by cpus leaving the kernel and by secondary slave cpus that were not allocated a paca for what ever reason -- they could be beyond nr_cpus or not described in the current device tree for whatever reason (for example, kexec-load was not refreshed after a cpu hotplug operation). Cpus coming through that path they will write to paca[NR_CPUS] which is beyond the space allocated for the paca data and overwrite memory not allocated to pacas but very likely still real mode accessable). Move the write back to kexec_smp_wait, which is used only by cpus that found their paca, but after the transition to real mode. Signed-off-by: Milton Miller <miltonm@bga.com> Cc: <stable@kernel.org> # (1fc711f was backported to 2.6.32) Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-11 03:28:33 +08:00
* mark the paca as no longer used
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:36:14 +08:00
* join other cpus in kexec_wait(phys_id)
*/
_GLOBAL(kexec_smp_wait)
lhz r3,PACAHWCPUID(r13)
bl real_mode
powerpc/kexec: Fix memory corruption from unallocated slaves Commit 1fc711f7ffb01089efc58042cfdbac8573d1b59a (powerpc/kexec: Fix race in kexec shutdown) moved the write to signal the cpu had exited the kernel from before the transition to real mode in kexec_smp_wait to kexec_wait. Unfornately it missed that kexec_wait is used both by cpus leaving the kernel and by secondary slave cpus that were not allocated a paca for what ever reason -- they could be beyond nr_cpus or not described in the current device tree for whatever reason (for example, kexec-load was not refreshed after a cpu hotplug operation). Cpus coming through that path they will write to paca[NR_CPUS] which is beyond the space allocated for the paca data and overwrite memory not allocated to pacas but very likely still real mode accessable). Move the write back to kexec_smp_wait, which is used only by cpus that found their paca, but after the transition to real mode. Signed-off-by: Milton Miller <miltonm@bga.com> Cc: <stable@kernel.org> # (1fc711f was backported to 2.6.32) Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-11 03:28:33 +08:00
li r4,KEXEC_STATE_REAL_MODE
stb r4,PACAKEXECSTATE(r13)
SYNC
powerpc: No need to use dot symbols when branching to a function binutils is smart enough to know that a branch to a function descriptor is actually a branch to the functions text address. Alan tells me that binutils has been doing this for 9 years. Signed-off-by: Anton Blanchard <anton@samba.org>
2014-02-04 13:04:35 +08:00
b kexec_wait
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:36:14 +08:00
/*
* switch to real mode (turn mmu off)
* we use the early kernel trick that the hardware ignores bits
* 0 and 1 (big endian) of the effective address in real mode
*
* don't overwrite r3 here, it is live for kexec_wait above.
*/
real_mode: /* assume normal blr return */
powerpc/book3e-64/kexec: create an identity TLB mapping book3e has no real MMU mode so we have to create an identity TLB mapping to make sure we can access the real physical address. Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com> [scottwood: cleanup, and split off some changes] Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-10-07 11:48:18 +08:00
#ifdef CONFIG_PPC_BOOK3E
/* Create an identity mapping. */
b kexec_create_tlb
#else
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:36:14 +08:00
1: li r9,MSR_RI
li r10,MSR_DR|MSR_IR
mflr r11 /* return address to SRR0 */
mfmsr r12
andc r9,r12,r9
andc r10,r12,r10
mtmsrd r9,1
mtspr SPRN_SRR1,r10
mtspr SPRN_SRR0,r11
rfid
powerpc/book3e-64/kexec: create an identity TLB mapping book3e has no real MMU mode so we have to create an identity TLB mapping to make sure we can access the real physical address. Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com> [scottwood: cleanup, and split off some changes] Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-10-07 11:48:18 +08:00
#endif
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:36:14 +08:00
/*
powerpc: Kexec exit should not use magic numbers Commit 54622f10a6aabb8bb2bdacf3dd070046f03dc246 ("powerpc: Support for relocatable kdump kernel") added a magic flag value in a register to tell purgatory that it should be a panic kernel. This part is wrong and is reverted by this commit. The kernel gets a list of memory blocks and a entry point from user space. Its job is to copy the blocks into place and then branch to the designated entry point (after turning "off" the mmu). The user space tool inserts a trampoline, called purgatory, that runs before the user supplied code. Its job is to establish the entry environment for the new kernel or other application based on the contents of memory. The purgatory code is compiled and embedded in the tool, where it is later patched using the elf symbol table using elf symbols. Since the tool knows it is creating a purgatory that will run after a kernel crash, it should just patch purgatory (or the kernel directly) if something needs to happen. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-22 18:39:18 +08:00
* kexec_sequence(newstack, start, image, control, clear_all())
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:36:14 +08:00
*
* does the grungy work with stack switching and real mode switches
* also does simple calls to other code
*/
_GLOBAL(kexec_sequence)
mflr r0
std r0,16(r1)
/* switch stacks to newstack -- &kexec_stack.stack */
[POWERPC] Clean up misc_64.S * Removed get_msr(), get_srr0(), and get_srr1() - not used anywhere * Use STACK_FRAME_OVERHEAD instead of magic number Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24 11:20:16 +08:00
stdu r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r3)
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:36:14 +08:00
mr r1,r3
li r0,0
std r0,16(r1)
/* save regs for local vars on new stack.
* yes, we won't go back, but ...
*/
std r31,-8(r1)
std r30,-16(r1)
std r29,-24(r1)
std r28,-32(r1)
std r27,-40(r1)
std r26,-48(r1)
std r25,-56(r1)
[POWERPC] Clean up misc_64.S * Removed get_msr(), get_srr0(), and get_srr1() - not used anywhere * Use STACK_FRAME_OVERHEAD instead of magic number Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-24 11:20:16 +08:00
stdu r1,-STACK_FRAME_OVERHEAD-64(r1)
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:36:14 +08:00
/* save args into preserved regs */
mr r31,r3 /* newstack (both) */
mr r30,r4 /* start (real) */
mr r29,r5 /* image (virt) */
mr r28,r6 /* control, unused */
mr r27,r7 /* clear_all() fn desc */
powerpc: Kexec exit should not use magic numbers Commit 54622f10a6aabb8bb2bdacf3dd070046f03dc246 ("powerpc: Support for relocatable kdump kernel") added a magic flag value in a register to tell purgatory that it should be a panic kernel. This part is wrong and is reverted by this commit. The kernel gets a list of memory blocks and a entry point from user space. Its job is to copy the blocks into place and then branch to the designated entry point (after turning "off" the mmu). The user space tool inserts a trampoline, called purgatory, that runs before the user supplied code. Its job is to establish the entry environment for the new kernel or other application based on the contents of memory. The purgatory code is compiled and embedded in the tool, where it is later patched using the elf symbol table using elf symbols. Since the tool knows it is creating a purgatory that will run after a kernel crash, it should just patch purgatory (or the kernel directly) if something needs to happen. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-22 18:39:18 +08:00
mr r26,r8 /* spare */
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:36:14 +08:00
lhz r25,PACAHWCPUID(r13) /* get our phys cpu from paca */
/* disable interrupts, we are overwriting kernel data next */
mfmsr r3
rlwinm r3,r3,0,17,15
mtmsrd r3,1
/* copy dest pages, flush whole dest image */
mr r3,r29
powerpc: No need to use dot symbols when branching to a function binutils is smart enough to know that a branch to a function descriptor is actually a branch to the functions text address. Alan tells me that binutils has been doing this for 9 years. Signed-off-by: Anton Blanchard <anton@samba.org>
2014-02-04 13:04:35 +08:00
bl kexec_copy_flush /* (image) */
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:36:14 +08:00
/* turn off mmu */
bl real_mode
[POWERPC] kexec: Send slaves to new kernel earlier With this, when kexec-ing, we copy the code and start the slaves on their journey to the next kernel's spin loop as soon as we copy the kexec image into place. The kernel doesn't know exactly which slaves are spinning in kexec_wait. This allows us to pass more than max-cpus to the next kernel. But it also means that we might leave some behind. Moving the code here means they have the time it takes us to clear the hash table to wake up and move on. Moving the code any earlier would reuqire walking the image description to search for the code, which could span multiple pages. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-11 16:32:17 +08:00
/* copy 0x100 bytes starting at start to 0 */
li r3,0
mr r4,r30 /* start, aka phys mem offset */
li r5,0x100
li r6,0
powerpc: No need to use dot symbols when branching to a function binutils is smart enough to know that a branch to a function descriptor is actually a branch to the functions text address. Alan tells me that binutils has been doing this for 9 years. Signed-off-by: Anton Blanchard <anton@samba.org>
2014-02-04 13:04:35 +08:00
bl copy_and_flush /* (dest, src, copy limit, start offset) */
[POWERPC] kexec: Send slaves to new kernel earlier With this, when kexec-ing, we copy the code and start the slaves on their journey to the next kernel's spin loop as soon as we copy the kexec image into place. The kernel doesn't know exactly which slaves are spinning in kexec_wait. This allows us to pass more than max-cpus to the next kernel. But it also means that we might leave some behind. Moving the code here means they have the time it takes us to clear the hash table to wake up and move on. Moving the code any earlier would reuqire walking the image description to search for the code, which could span multiple pages. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-11 16:32:17 +08:00
1: /* assume normal blr return */
/* release other cpus to the new kernel secondary start at 0x60 */
mflr r5
li r6,1
stw r6,kexec_flag-1b(5)
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:36:14 +08:00
/* clear out hardware hash page table and tlb */
powerpc: ABIv2 function calls must place target address in r12 To establish addressability quickly, ABIv2 requires the target address of the function being called to be in r12. Fix a number of places in assembly code that we do indirect function calls. We need to avoid function descriptors on ABIv2 too. Signed-off-by: Anton Blanchard <anton@samba.org>
2014-02-04 13:07:47 +08:00
#if !defined(_CALL_ELF) || _CALL_ELF != 2
ld r12,0(r27) /* deref function descriptor */
#else
mr r12,r27
#endif
mtctr r12
[POWERPC] Minor comment fix for misc_64.S A minor comment fix for misc_64.S from Takao Shinohara. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-07-26 05:05:01 +08:00
bctrl /* ppc_md.hpte_clear_all(void); */
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:36:14 +08:00
/*
* kexec image calling is:
* the first 0x100 bytes of the entry point are copied to 0
*
* all slaves branch to slave = 0x60 (absolute)
* slave(phys_cpu_id);
*
* master goes to start = entry point
* start(phys_cpu_id, start, 0);
*
*
* a wrapper is needed to call existing kernels, here is an approximate
* description of one method:
*
* v2: (2.6.10)
* start will be near the boot_block (maybe 0x100 bytes before it?)
* it will have a 0x60, which will b to boot_block, where it will wait
* and 0 will store phys into struct boot-block and load r3 from there,
* copy kernel 0-0x100 and tell slaves to back down to 0x60 again
*
* v1: (2.6.9)
* boot block will have all cpus scanning device tree to see if they
* are the boot cpu ?????
* other device tree differences (prop sizes, va vs pa, etc)...
*/
mr r3,r25 # my phys cpu
mr r4,r30 # start, aka phys mem offset
mtlr 4
li r5,0
powerpc: Kexec exit should not use magic numbers Commit 54622f10a6aabb8bb2bdacf3dd070046f03dc246 ("powerpc: Support for relocatable kdump kernel") added a magic flag value in a register to tell purgatory that it should be a panic kernel. This part is wrong and is reverted by this commit. The kernel gets a list of memory blocks and a entry point from user space. Its job is to copy the blocks into place and then branch to the designated entry point (after turning "off" the mmu). The user space tool inserts a trampoline, called purgatory, that runs before the user supplied code. Its job is to establish the entry environment for the new kernel or other application based on the contents of memory. The purgatory code is compiled and embedded in the tool, where it is later patched using the elf symbol table using elf symbols. Since the tool knows it is creating a purgatory that will run after a kernel crash, it should just patch purgatory (or the kernel directly) if something needs to happen. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-10-22 18:39:18 +08:00
blr /* image->start(physid, image->start, 0); */
powerpc: Introduce entry_{32,64}.S, misc_{32,64}.S, systbl.S The system call table has been consolidated into systbl.S. We have separate 32-bit and 64-bit versions of entry.S and misc.S since the code is mostly sufficiently different to be not worth merging. There are some common bits that will be extracted in future. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:36:14 +08:00
#endif /* CONFIG_KEXEC */
powerpc: EXPORT_SYMBOL(.TOC.) For the ELFv2 ABI, powerpc introduces a magic symbol ".TOC.". depmod then complains that this doesn't resolve (so does modpost, but we could easily fix that). To export this, we need to use asm. modpost and depmod both strip "." from symbols for the old PPC64 ELFv1 ABI, so we actually export a "TOC.". Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-03-18 15:07:28 +08:00
#ifdef CONFIG_MODULES
#if defined(_CALL_ELF) && _CALL_ELF == 2
powerpc: module: handle MODVERSION for .TOC. For the ELFv2 ABI, powerpc introduces a magic symbol ".TOC.". If we don't create a CRC for it (minus the leading ".", since we strip that) we get a modpost warning about missing CRC and the CRC array seems to be displaced by 1 so other CRCs mismatch too. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-03-18 17:29:11 +08:00
#ifdef CONFIG_MODVERSIONS
.weak __crc_TOC.
.section "___kcrctab+TOC.","a"
.globl __kcrctab_TOC.
__kcrctab_TOC.:
.llong __crc_TOC.
#endif
powerpc: EXPORT_SYMBOL(.TOC.) For the ELFv2 ABI, powerpc introduces a magic symbol ".TOC.". depmod then complains that this doesn't resolve (so does modpost, but we could easily fix that). To export this, we need to use asm. modpost and depmod both strip "." from symbols for the old PPC64 ELFv1 ABI, so we actually export a "TOC.". Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-03-18 15:07:28 +08:00
/*
* Export a fake .TOC. since both modpost and depmod will complain otherwise.
* Both modpost and depmod strip the leading . so we do the same here.
*/
.section "__ksymtab_strings","a"
__kstrtab_TOC.:
.asciz "TOC."
.section "___ksymtab+TOC.","a"
/* This symbol name is important: it's used by modpost to find exported syms */
.globl __ksymtab_TOC.
__ksymtab_TOC.:
.llong 0 /* .value */
.llong __kstrtab_TOC.
#endif /* ELFv2 */
#endif /* MODULES */