OpenCloudOS-Kernel/include/linux/udp.h

127 lines
3.7 KiB
C
Raw Normal View History

/*
* INET An implementation of the TCP/IP protocol suite for the LINUX
* operating system. INET is implemented using the BSD Socket
* interface as the means of communication with the user level.
*
* Definitions for the UDP protocol.
*
* Version: @(#)udp.h 1.0.2 04/28/93
*
* Author: Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#ifndef _LINUX_UDP_H
#define _LINUX_UDP_H
#include <net/inet_sock.h>
#include <linux/skbuff.h>
#include <net/netns/hash.h>
#include <uapi/linux/udp.h>
static inline struct udphdr *udp_hdr(const struct sk_buff *skb)
{
return (struct udphdr *)skb_transport_header(skb);
}
static inline struct udphdr *inner_udp_hdr(const struct sk_buff *skb)
{
return (struct udphdr *)skb_inner_transport_header(skb);
}
#define UDP_HTABLE_SIZE_MIN (CONFIG_BASE_SMALL ? 128 : 256)
static inline u32 udp_hashfn(const struct net *net, u32 num, u32 mask)
{
return (num + net_hash_mix(net)) & mask;
}
struct udp_sock {
/* inet_sock has to be the first member */
struct inet_sock inet;
#define udp_port_hash inet.sk.__sk_common.skc_u16hashes[0]
#define udp_portaddr_hash inet.sk.__sk_common.skc_u16hashes[1]
#define udp_portaddr_node inet.sk.__sk_common.skc_portaddr_node
int pending; /* Any pending frames ? */
unsigned int corkflag; /* Cork is required */
__u8 encap_type; /* Is this an Encapsulation socket? */
unsigned char no_check6_tx:1,/* Send zero UDP6 checksums on TX? */
no_check6_rx:1;/* Allow zero UDP6 checksums on RX? */
/*
* Following member retains the information to create a UDP header
* when the socket is uncorked.
*/
__u16 len; /* total length of pending frames */
udp: generate gso with UDP_SEGMENT Support generic segmentation offload for udp datagrams. Callers can concatenate and send at once the payload of multiple datagrams with the same destination. To set segment size, the caller sets socket option UDP_SEGMENT to the length of each discrete payload. This value must be smaller than or equal to the relevant MTU. A follow-up patch adds cmsg UDP_SEGMENT to specify segment size on a per send call basis. Total byte length may then exceed MTU. If not an exact multiple of segment size, the last segment will be shorter. The implementation adds a gso_size field to the udp socket, ip(v6) cmsg cookie and inet_cork structure to be able to set the value at setsockopt or cmsg time and to work with both lockless and corked paths. Initial benchmark numbers show UDP GSO about as expensive as TCP GSO. tcp tso 3197 MB/s 54232 msg/s 54232 calls/s 6,457,754,262 cycles tcp gso 1765 MB/s 29939 msg/s 29939 calls/s 11,203,021,806 cycles tcp without tso/gso * 739 MB/s 12548 msg/s 12548 calls/s 11,205,483,630 cycles udp 876 MB/s 14873 msg/s 624666 calls/s 11,205,777,429 cycles udp gso 2139 MB/s 36282 msg/s 36282 calls/s 11,204,374,561 cycles [*] after reverting commit 0a6b2a1dc2a2 ("tcp: switch to GSO being always on") Measured total system cycles ('-a') for one core while pinning both the network receive path and benchmark process to that core: perf stat -a -C 12 -e cycles \ ./udpgso_bench_tx -C 12 -4 -D "$DST" -l 4 Note the reduction in calls/s with GSO. Bytes per syscall drops increases from 1470 to 61818. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27 01:42:17 +08:00
__u16 gso_size;
[NET]: Supporting UDP-Lite (RFC 3828) in Linux This is a revision of the previously submitted patch, which alters the way files are organized and compiled in the following manner: * UDP and UDP-Lite now use separate object files * source file dependencies resolved via header files net/ipv{4,6}/udp_impl.h * order of inclusion files in udp.c/udplite.c adapted accordingly [NET/IPv4]: Support for the UDP-Lite protocol (RFC 3828) This patch adds support for UDP-Lite to the IPv4 stack, provided as an extension to the existing UDPv4 code: * generic routines are all located in net/ipv4/udp.c * UDP-Lite specific routines are in net/ipv4/udplite.c * MIB/statistics support in /proc/net/snmp and /proc/net/udplite * shared API with extensions for partial checksum coverage [NET/IPv6]: Extension for UDP-Lite over IPv6 It extends the existing UDPv6 code base with support for UDP-Lite in the same manner as per UDPv4. In particular, * UDPv6 generic and shared code is in net/ipv6/udp.c * UDP-Litev6 specific extensions are in net/ipv6/udplite.c * MIB/statistics support in /proc/net/snmp6 and /proc/net/udplite6 * support for IPV6_ADDRFORM * aligned the coding style of protocol initialisation with af_inet6.c * made the error handling in udpv6_queue_rcv_skb consistent; to return `-1' on error on all error cases * consolidation of shared code [NET]: UDP-Lite Documentation and basic XFRM/Netfilter support The UDP-Lite patch further provides * API documentation for UDP-Lite * basic xfrm support * basic netfilter support for IPv4 and IPv6 (LOG target) Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-28 03:10:57 +08:00
/*
* Fields specific to UDP-Lite.
*/
__u16 pcslen;
__u16 pcrlen;
/* indicator bits used by pcflag: */
#define UDPLITE_BIT 0x1 /* set by udplite proto init function */
#define UDPLITE_SEND_CC 0x2 /* set via udplite setsockopt */
#define UDPLITE_RECV_CC 0x4 /* set via udplite setsocktopt */
__u8 pcflag; /* marks socket as UDP-Lite if > 0 */
__u8 unused[3];
/*
* For encapsulation sockets.
*/
int (*encap_rcv)(struct sock *sk, struct sk_buff *skb);
void (*encap_destroy)(struct sock *sk);
/* GRO functions for UDP socket */
struct sk_buff * (*gro_receive)(struct sock *sk,
struct list_head *head,
struct sk_buff *skb);
int (*gro_complete)(struct sock *sk,
struct sk_buff *skb,
int nhoff);
/* udp_recvmsg try to use this before splicing sk_receive_queue */
struct sk_buff_head reader_queue ____cacheline_aligned_in_smp;
/* This field is dirtied by udp_recvmsg() */
int forward_deficit;
};
udp: generate gso with UDP_SEGMENT Support generic segmentation offload for udp datagrams. Callers can concatenate and send at once the payload of multiple datagrams with the same destination. To set segment size, the caller sets socket option UDP_SEGMENT to the length of each discrete payload. This value must be smaller than or equal to the relevant MTU. A follow-up patch adds cmsg UDP_SEGMENT to specify segment size on a per send call basis. Total byte length may then exceed MTU. If not an exact multiple of segment size, the last segment will be shorter. The implementation adds a gso_size field to the udp socket, ip(v6) cmsg cookie and inet_cork structure to be able to set the value at setsockopt or cmsg time and to work with both lockless and corked paths. Initial benchmark numbers show UDP GSO about as expensive as TCP GSO. tcp tso 3197 MB/s 54232 msg/s 54232 calls/s 6,457,754,262 cycles tcp gso 1765 MB/s 29939 msg/s 29939 calls/s 11,203,021,806 cycles tcp without tso/gso * 739 MB/s 12548 msg/s 12548 calls/s 11,205,483,630 cycles udp 876 MB/s 14873 msg/s 624666 calls/s 11,205,777,429 cycles udp gso 2139 MB/s 36282 msg/s 36282 calls/s 11,204,374,561 cycles [*] after reverting commit 0a6b2a1dc2a2 ("tcp: switch to GSO being always on") Measured total system cycles ('-a') for one core while pinning both the network receive path and benchmark process to that core: perf stat -a -C 12 -e cycles \ ./udpgso_bench_tx -C 12 -4 -D "$DST" -l 4 Note the reduction in calls/s with GSO. Bytes per syscall drops increases from 1470 to 61818. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27 01:42:17 +08:00
#define UDP_MAX_SEGMENTS (1 << 6UL)
static inline struct udp_sock *udp_sk(const struct sock *sk)
{
return (struct udp_sock *)sk;
}
static inline void udp_set_no_check6_tx(struct sock *sk, bool val)
{
udp_sk(sk)->no_check6_tx = val;
}
static inline void udp_set_no_check6_rx(struct sock *sk, bool val)
{
udp_sk(sk)->no_check6_rx = val;
}
static inline bool udp_get_no_check6_tx(struct sock *sk)
{
return udp_sk(sk)->no_check6_tx;
}
static inline bool udp_get_no_check6_rx(struct sock *sk)
{
return udp_sk(sk)->no_check6_rx;
}
#define udp_portaddr_for_each_entry(__sk, list) \
hlist_for_each_entry(__sk, list, __sk_common.skc_portaddr_node)
#define udp_portaddr_for_each_entry_rcu(__sk, list) \
hlist_for_each_entry_rcu(__sk, list, __sk_common.skc_portaddr_node)
#define IS_UDPLITE(__sk) (__sk->sk_protocol == IPPROTO_UDPLITE)
#endif /* _LINUX_UDP_H */