UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/irqchip/Makefile

106 lines
4.9 KiB
Makefile
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
# SPDX-License-Identifier: GPL-2.0
irqchip: add basic infrastructure With the recent creation of the drivers/irqchip/ directory, it is desirable to move irq controller drivers here. At the moment, the only driver here is irq-bcm2835, the driver for the irq controller found in the ARM BCM2835 SoC, present in Rasberry Pi systems. This irq controller driver was exporting its initialization function and its irq handling function through a header file in <linux/irqchip/bcm2835.h>. When proposing to also move another irq controller driver in drivers/irqchip, Rob Herring raised the very valid point that moving things to drivers/irqchip was good in order to remove more stuff from arch/arm, but if it means adding gazillions of headers files in include/linux/irqchip/, it would not be very nice. So, upon the suggestion of Rob Herring and Arnd Bergmann, this commit introduces a small infrastructure that defines a central irqchip_init() function in drivers/irqchip/irqchip.c, which is meant to be called as the ->init_irq() callback of ARM platforms. This function calls of_irq_init() with an array of match strings and init functions generated from a special linker section. Note that the irq controller driver initialization function is responsible for setting the global handle_arch_irq() variable, so that ARM platforms no longer have to define the ->handle_irq field in their DT_MACHINE structure. A global header, <linux/irqchip.h> is also added to expose the single irqchip_init() function to the reset of the kernel. A further commit moves the BCM2835 irq controller driver to this new small infrastructure, therefore removing the include/linux/irqchip/ directory. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Stephen Warren <swarren@wwwdotorg.org> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Arnd Bergmann <arnd@arndb.de> [rob.herring: reword commit message to reflect use of linker sections.] Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-11-21 06:00:52 +08:00
obj-$(CONFIG_IRQCHIP) += irqchip.o
irqchip/al-fic: Introduce Amazon's Annapurna Labs Fabric Interrupt Controller Driver The Amazon's Annapurna Labs Fabric Interrupt Controller has 32 inputs. A FIC (Fabric Interrupt Controller) may be cascaded into another FIC or directly to the main CPU Interrupt Controller (e.g. GIC). Signed-off-by: Talel Shenhar <talel@amazon.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-06-10 16:34:43 +08:00
obj-$(CONFIG_AL_FIC) += irq-al-fic.o
irqchip: Add the Alpine MSIX interrupt controller This patch adds the Alpine MSIX interrupt controller driver. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by: Tsahee Zidenberg <tsahee@annapurnalabs.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-02-19 23:22:44 +08:00
obj-$(CONFIG_ALPINE_MSI) += irq-alpine-msi.o
irqchip/ath79-cpu: Move the CPU IRQ driver from arch/mips/ath79/ Signed-off-by: Alban Bedel <albeu@free.fr> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1453553867-27003-2-git-send-email-albeu@free.fr Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2016-01-23 20:57:47 +08:00
obj-$(CONFIG_ATH79) += irq-ath79-cpu.o
irqchip/ath79-misc: Move the MISC driver from arch/mips/ath79/ The driver stays the same but the initialization changes a bit. For OF boards we now get the memory map from the OF node and use a linear mapping instead of the legacy mapping. For legacy boards we still use a legacy mapping and just pass down all the parameters from the board init code. Signed-off-by: Alban Bedel <albeu@free.fr> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1453553867-27003-1-git-send-email-albeu@free.fr Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2016-01-23 20:57:46 +08:00
obj-$(CONFIG_ATH79) += irq-ath79-misc.o
ARM: SPEAr3xx: Shirq: Move shirq controller out of plat/ This patch moves shirq interrupt controllers driver and header file out of plat-spear directory. It is moved to drivers/irqchip/ directory. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2012-11-13 01:26:03 +08:00
obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2835.o
irqchip: Add bcm2836 interrupt controller for Raspberry Pi 2 This interrupt controller is the new root interrupt controller with the timer, PMU events, and IPIs, and the bcm2835's interrupt controller is chained off of it to handle the peripherals. I wrote the interrupt chip support, while Andrea Merello wrote the IPI code. Signed-off-by: Andrea Merello <andrea.merello@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Cc: linux-rpi-kernel@lists.infradead.org Cc: Lee Jones <lee@kernel.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1438902033-31477-5-git-send-email-eric@anholt.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-07 07:00:33 +08:00
obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2836.o
irqchip: davinci-aintc: move the driver to drivers/irqchip The aintc driver has now been cleaned up. Move it to drivers/irqchip where it belongs. There's no device-tree support for any dm* board so there's no IRQCHIP_OF_DECLARE() - there's only the exported init function called from machine code. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-02-14 22:52:16 +08:00
obj-$(CONFIG_DAVINCI_AINTC) += irq-davinci-aintc.o
irqchip: davinci-cp-intc: move the driver to drivers/irqchip The cp-intc driver has now been cleaned up. Move it to drivers/irqchip where it belongs. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: David Lechner <david@lechnology.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-02-14 22:52:30 +08:00
obj-$(CONFIG_DAVINCI_CP_INTC) += irq-davinci-cp-intc.o
ARM: exynos: move exynos4210-combiner to drivers/irqchip Exynos boot is broken with commit 0529e315 (ARM: use common irqchip_init for GIC init). This commit split the irqchip initialization into 2 calls to of_irq_init. This does not work because of_irq_init requires interrupt parents to be in the match list. Rather than reverting exynos changes, make it do the proper thing by using IRQCHIP_DECLARE. This requires moving the combiner code to drivers/irqchip. Reported-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-samsung-soc@vger.kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2013-02-13 06:04:52 +08:00
obj-$(CONFIG_ARCH_EXYNOS) += exynos-combiner.o
irqchip/gemini: Refactor Gemini driver to reflect Faraday origin The Gemini irqchip turns out to be a standard IP component from Faraday Technology named FTINTC010 after some research and new information. - Rename the driver and all symbols to reflect the new information. - Add the new compatible string "faraday,ftintc010" - Create a Kconfig symbol CONFIG_FARADAY_FTINTC010 so that SoCs using this interrupt controller can easily select and reuse it instead of hardwiring it to ARCH_GEMINI I have created a separate patch to select the new Kconfig symbol from the Gemini machine, which will be merged through the ARM SoC tree. Cc: Greentime Hu <green.hu@gmail.com> Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-03-19 00:53:24 +08:00
obj-$(CONFIG_FARADAY_FTINTC010) += irq-ftintc010.o
irqchip: hip04: Enable Hisilicon HiP04 interrupt controller HiP04 GIC is the variate of ARM GICv2. ARM GICv2 supports 8 cores. HiP04 GIC extends to support 16 cores. It results that bit fields in GIC_DIST_TARGET & GIC_DIST_SOFTINT are different from ARM GICv2. And the maximium IRQ is downgrade from 1020 to 510. Since different register offset & bitfields definitation breaks compartible with ARM GICv2, create a new hip04 irq driver. And this driver is derived from irq-gic.c to support the Hisilicon HiP04 interrupt controller, which is similar to the GIC, but deviates at some points. Support for power management, non-banked registers, cascaded GICs (and multiple controllers in general) and bigLittle support has been removed from the GIC driver. Affinity related functions have been adjusted to match the Hisilicon hardware implementation. Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org> Link: https://lkml.kernel.org/r/1407408695-19626-9-git-send-email-haojian.zhuang@linaro.org Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-08-07 18:51:34 +08:00
obj-$(CONFIG_ARCH_HIP04) += irq-hip04.o
irqchip: Add LPC32xx interrupt controller driver The change adds improved support of NXP LPC32xx MIC, SIC1 and SIC2 interrupt controllers. This is a list of new features in comparison to the legacy driver: * irq types are taken from device tree settings, no more need to hardcode them, * old driver is based on irq_domain_add_legacy, which causes problems with handling MIC hardware interrupt 0 produced by SIC1, * there is one driver for MIC, SIC1 and SIC2, no more need to handle them separately, e.g. have two separate handlers for SIC1 and SIC2, * the driver does not have any dependencies on hardcoded register offsets, * the driver is much simpler for maintenance, * SPARSE_IRQS option is supported. Legacy LPC32xx interrupt controller driver was broken since commit 76ba59f8366f ("genirq: Add irq_domain-aware core IRQ handler"), which requires a private interrupt handler, otherwise any SIC1 generated interrupt (mapped to MIC hwirq 0) breaks the kernel with the message "unexpected IRQ trap at vector 00". The change disables compilation of a legacy driver found at arch/arm/mach-lpc32xx/irq.c, the file will be removed in a separate commit. Fixes: 76ba59f8366f ("genirq: Add irq_domain-aware core IRQ handler") Tested-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-04-25 09:00:38 +08:00
obj-$(CONFIG_ARCH_LPC32XX) += irq-lpc32xx.o
irqchip: move mmp irq driver Move irq-mmp driver from mach-mmp directory into irqchip directory. It's used to support multiple platform. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2013-04-21 13:21:48 +08:00
obj-$(CONFIG_ARCH_MMP) += irq-mmp.o
irqchip/mxs: Add Alphascale ASM9260 support Freescale iMX23/iMX28 and Alphascale ASM9260 have similar interrupt collectors. We already prepared the mxs driver to handle a different register layout. Add the actual ASM9260 support. Differences between these devices: - Different register offsets - Different count of interupt lines per register - ASM9260 does not provide reset bit - ASM9260 does not support FIQ. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Tested-by: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: marc.zyngier@arm.com Cc: jason@lakedaemon.net Link: http://lkml.kernel.org/r/1444677334-12242-6-git-send-email-linux@rempel-privat.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-13 03:15:34 +08:00
obj-$(CONFIG_IRQ_MXS) += irq-mxs.o
irqchip: tegra: Add DT-based support for legacy interrupt controller Tegra's LIC (Legacy Interrupt Controller) has been so far only supported as a weird extension of the GIC, which is not exactly pretty. The stacked IRQ domain framework fits this pretty well, and allows the LIC code to be turned into a standalone irqchip. In the process, make the driver DT aware, something that was sorely missing from the mach-tegra implementation. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1426088583-15097-3-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2015-03-11 23:42:59 +08:00
obj-$(CONFIG_ARCH_TEGRA) += irq-tegra.o
ARM: S3C24XX: move irq driver to drivers/irqchip This move is necessary to make use of the irqchip infrastructure for the following devicetree support for s3c24xx architectures. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-04-04 13:53:33 +08:00
obj-$(CONFIG_ARCH_S3C24XX) += irq-s3c24xx.o
irqchip: add DesignWare APB ICTL interrupt controller This adds an irqchip driver and corresponding devicetree binding for the secondary interrupt controllers based on Synopsys DesignWare IP dw_apb_ictl. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Jisheng Zhang <jszhang@marvell.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
2013-09-09 20:01:20 +08:00
obj-$(CONFIG_DW_APB_ICTL) += irq-dw-apb-ictl.o
ARM: clps711x: Add CLPS711X irqchip driver This adds the irqchip driver for Cirrus Logic CLPS711X series SoCs. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-02-02 16:07:46 +08:00
obj-$(CONFIG_CLPS711X_IRQCHIP) += irq-clps711x.o
irqchip: add initial support for ompic IPI driver for the Open Multi-Processor Interrupt Controller (ompic) as described in the Multi-core support section of the OpenRISC 1.2 architecture specification: https://github.com/openrisc/doc/raw/master/openrisc-arch-1.2-rev0.pdf Each OpenRISC core contains a full interrupt controller which is used in the SMP architecture for interrupt balancing. This IPI device, the ompic, is the only external device required for enabling SMP on OpenRISC. Pending ops are stored in a memory bit mask which can allow multiple pending operations to be set and serviced at a time. This is mostly borrowed from the alpha IPI implementation. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> [shorne@gmail.com: converted ops to bitmask, wrote commit message] Signed-off-by: Stafford Horne <shorne@gmail.com>
2017-10-30 20:38:35 +08:00
obj-$(CONFIG_OMPIC) += irq-ompic.o
irqchip: or1k-pic: Migrate from arch/openrisc/ In addition to consolidating the or1k-pic with other interrupt controllers, this makes OpenRISC less tied to its on-cpu interrupt controller. All or1k-pic specific parts are moved out of irq.c and into drivers/irqchip/irq-or1k-pic.c In that transition, the functionality have been divided into three chip variants. One that handles level triggered interrupts, one that handles edge triggered interrupts and one that handles the interrupt controller that is present in the or1200 OpenRISC cpu implementation. Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Link: https://lkml.kernel.org/r/1401136302-27654-1-git-send-email-stefan.kristiansson@saunalahti.fi Acked-by: Jonas Bonn <jonas@southpole.se> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-05-27 04:31:42 +08:00
obj-$(CONFIG_OR1K_PIC) += irq-or1k-pic.o
irqchip: Add support for Marvell Orion SoCs This patch adds an irqchip driver for the main interrupt controller found on Marvell Orion SoCs (Kirkwood, Dove, Orion5x, Discovery Innovation). Corresponding device tree documentation is also added. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Acked-by: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Rob Landley <rob@landley.net> Cc: John Stultz <john.stultz@linaro.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Gregory Clement <gregory.clement@free-electrons.com> Cc: devicetree-discuss@lists.ozlabs.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1370536034-23956-2-git-send-email-sebastian.hesselbarth@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-06-07 00:27:09 +08:00
obj-$(CONFIG_ORION_IRQCHIP) += irq-orion.o
arm: omap: irq: move irq.c to drivers/irqchip/ Just move the code over as it has no dependencies on arch/arm/ anymore. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-16 05:15:02 +08:00
obj-$(CONFIG_OMAP_IRQCHIP) += irq-omap-intc.o
irqchip: sunxi: Rename sunxi to sun4i During the introduction of the Allwinner SoC platforms, sunxi was initially meant as a generic name for all the variants of the Allwinner SoC. It was ok at the time of the support of only the A10 and A13 that looks pretty much the same, but it's beginning to be troublesome with the future addition of the Allwinner A31 (sun6i) that is quite different, and would introduce some weird logic, where sunxi would actually mean in some case sun4i and sun5i but without sun6i... Moreover, it makes the compatible strings naming scheme not consistent with other architectures, where usually for this kind of compability, we just use the oldest SoC name that has this IP, so let's do just this. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2013-03-24 17:10:04 +08:00
obj-$(CONFIG_ARCH_SUNXI) += irq-sun4i.o
ARM: sun7i/sun6i: irqchip: Add irqchip driver for NMI controller Allwinner A20/A31 SoCs have special registers to control / (un)mask / acknowledge NMI. This NMI controller is separated and independent from GIC. This patch adds a new irqchip to manage NMI. Signed-off-by: Carlo Caione <carlo@caione.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-sunxi@googlegroups.com Cc: mark.rutland@arm.com Cc: hdegoede@redhat.com Link: http://lkml.kernel.org/r/1395256879-8475-2-git-send-email-carlo@caione.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-03-20 03:21:17 +08:00
obj-$(CONFIG_ARCH_SUNXI) += irq-sunxi-nmi.o
ARM: SPEAr3xx: Shirq: Move shirq controller out of plat/ This patch moves shirq interrupt controllers driver and header file out of plat-spear directory. It is moved to drivers/irqchip/ directory. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2012-11-13 01:26:03 +08:00
obj-$(CONFIG_ARCH_SPEAR3XX) += spear-shirq.o
irqchip: gic: Move some bits of GICv2 to a library-type file A few GICv2 low-level function are actually very useful to GICv3, and it makes some sense to share them across the two drivers. They end-up in their own file, with an additional parameter used to ensure an optional synchronization (unused on GICv2). Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1404140510-5382-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-06-30 23:01:30 +08:00
obj-$(CONFIG_ARM_GIC) += irq-gic.o irq-gic-common.o
irqchip/gic: Add platform driver for non-root GICs that require RPM Add a platform driver to support non-root GICs that require runtime power-management. Currently, only non-root GICs are supported because the functions, smp_cross_call() and set_handle_irq(), that need to be called for a root controller are located in the __init section and so cannot be called by the platform driver. The GIC platform driver re-uses many functions from the existing GIC driver including some functions to save and restore the GIC context during power transitions. The functions for saving and restoring the GIC context are currently only defined if CONFIG_CPU_PM is enabled and to ensure that these functions are always defined when the platform driver is enabled, a dependency on CONFIG_ARM_GIC_PM (which selects the platform driver) has been added. In order to re-use the private GIC initialisation code, a new public function, gic_of_init_child(), has been added which calls various private functions to initialise the GIC. This is different from the existing gic_of_init() because it only supports non-root GICs (ie. does not call smp_cross_call() is set_handle_irq()) and is not located in the __init section (so can be used by platform drivers). Furthermore, gic_of_init_child() dynamically allocates memory for the GIC chip data which is also different from gic_of_init(). There is no specific suspend handling for GICs registered as platform devices. Non-wakeup interrupts will be disabled by the kernel during late suspend, however, this alone will not power down the GIC if interrupts have been requested and not freed. Therefore, requestors of non-wakeup interrupts will need to free them on entering suspend in order to power-down the GIC. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-06-07 23:12:34 +08:00
obj-$(CONFIG_ARM_GIC_PM) += irq-gic-pm.o
ARM: realview: imply device tree boot This reduces the Kconfig for the RealView by assuming we are always booting from the device tree, and removing all the uses of CONFIG_REALVIEW_DT and replacing with CONFIG_ARCH_REALVIEW. Further: - Drop REALVIEW_HIGH_PHYS_OFFSET: we don't use this with device tree. - Drop the REALVIEW_EB_ARM11MP_REVB option: we now handle this by simply using another device tree. - Drop the PB1176 secure flash option: this is defined in the PB1176 device tree but marked as "disabled", so users who want to use it can simply enable it in the device tree and go hacking around. Cc: Brian Norris <computersforpeace@gmail.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-10 20:30:35 +08:00
obj-$(CONFIG_ARCH_REALVIEW) += irq-gic-realview.o
irqchip: gic-v2m: Add support for ARM GICv2m MSI(-X) doorbell ARM GICv2m specification extends GICv2 to support MSI(-X) with a new register frame. This allows a GICv2 based system to support MSI with minimal changes. Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> [maz: converted the driver to use stacked irq domains, updated changelog] Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1416941243-7181-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-26 02:47:22 +08:00
obj-$(CONFIG_ARM_GIC_V2M) += irq-gic-v2m.o
irqchip/gic-v3: Add support for Message Based Interrupts as an MSI controller GICv3 offers the possibility to signal SPIs using a pair of doorbells (SETPI, CLRSPI) under the name of Message Based Interrupts (MBI). They can be used as either traditional (edge) MSIs, or the more exotic level-triggered flavour. Let's implement support for platform MSI, which is the original intent for this feature. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Herring <robh@kernel.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lkml.kernel.org/r/20180508121438.11301-8-marc.zyngier@arm.com
2018-05-08 20:14:36 +08:00
obj-$(CONFIG_ARM_GIC_V3) += irq-gic-v3.o irq-gic-v3-mbi.o irq-gic-common.o
irqchip/gic-v3-its: Remove artificial dependency on PCI The GICv3 ITS doesn't really depend on PCI. Only the PCI/MSI part of it does, and there is no reason not to blow away most of the irqchip stack because PCI is not selected (though not selecting PCI seem to be asking for punishment, but hey...). So let's split the PCI-specific part from the ITS in the Kconfig file, and let's make that part depend on PCI. Architecture specific hacks (arch/arm{,64}/Kconfig) will be addressed in a separate patch. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-11-14 01:25:59 +08:00
obj-$(CONFIG_ARM_GIC_V3_ITS) += irq-gic-v3-its.o irq-gic-v3-its-platform-msi.o irq-gic-v4.o
obj-$(CONFIG_ARM_GIC_V3_ITS_PCI) += irq-gic-v3-its-pci-msi.o
staging: fsl-mc: Move irqchip code out of staging Now that the fsl-mc bus core infrastructure is out of staging, the remaining irqchip glue code used (irq-gic-v3-its-fsl-mc-msi.c) goes to drivers/irqchip. Create new Kconfig option for irqchip code that depends on FSL_MC_BUS and ARM_GIC_V3_ITS. This ensures irqchip code only gets built on ARM64 platforms. We can now remove #ifdef GENERIC_MSI_DOMAIN_OPS as it was only needed for x86. Signed-off-by: Stuart Yoder <stuyoder@gmail.com> [rebased, add dpaa2_eth and dpio #include updates] Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> [rebased, split irqchip to separate patch] Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com> [add Kconfig dependency on ARM_GIC_V3_ITS] Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-05 22:07:43 +08:00
obj-$(CONFIG_ARM_GIC_V3_ITS_FSL_MC) += irq-gic-v3-its-fsl-mc-msi.o
irqchip: Add per-cpu interrupt partitioning library We've unfortunately started seeing a situation where percpu interrupts are partitioned in the system: one arbitrary set of CPUs has an interrupt connected to a type of device, while another disjoint set of CPUs has the same interrupt connected to another type of device. This makes it impossible to have a device driver requesting this interrupt using the current percpu-interrupt abstraction, as the same interrupt number is now potentially claimed by at least two drivers, and we forbid interrupt sharing on per-cpu interrupt. A solution to this is to turn things upside down. Let's assume that our system describes all the possible partitions for a given interrupt, and give each of them a unique identifier. It is then possible to create a namespace where the affinity identifier itself is a form of interrupt number. At this point, it becomes easy to implement a set of partitions as a cascaded irqchip, each affinity identifier being the HW irq. This allows us to keep a number of nice properties: - Each partition results in a separate percpu-interrupt (with a restrictied affinity), which keeps drivers happy. - Because the underlying interrupt is still per-cpu, the overhead of the indirection can be kept pretty minimal. - The core code can ignore most of that crap. For that purpose, we implement a small library that deals with some of the boilerplate code, relying on platform-specific drivers to provide a description of the affinity sets and a set of callbacks. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: Jason Cooper <jason@lakedaemon.net> Cc: Will Deacon <will.deacon@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Link: http://lkml.kernel.org/r/1460365075-7316-4-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-04-11 16:57:53 +08:00
obj-$(CONFIG_PARTITION_PERCPU) += irq-partition-percpu.o
irqchip/mgigen: Add platform device driver for mbigen device Mbigen means Message Based Interrupt Generator(MBIGEN). Its a kind of interrupt controller that collects the interrupts from external devices and generate msi interrupt. Mbigen is applied to reduce the number of wire connected interrupts. As the peripherals increasing, the interrupts lines needed is increasing much, especially on the Arm64 server SOC. Therefore, the interrupt pin in GIC is not enough to cover so many peripherals. Mbigen is designed to fix this problem. Mbigen chip locates in ITS or outside of ITS. Mbigen chip hardware structure shows as below: mbigen chip |---------------------|-------------------| mgn_node0 mgn_node1 mgn_node2 | |-------| |-------|------| dev1 dev1 dev2 dev1 dev3 dev4 Each mbigen chip contains several mbigen nodes. External devices can connect to mbigen node through wire connecting way. Because a mbigen node only can support 128 interrupt maximum, depends on the interrupt lines number of devices, a device can connects to one more mbigen nodes. Also, several different devices can connect to a same mbigen node. When devices triggered interrupt,mbigen chip detects and collects the interrupts and generates the MBI interrupts by writing the ITS Translator register. To simplify mbigen driver,I used a new conception--mbigen device. Each mbigen device is initialized as a platform device. Mbigen device presents the parts(register, pin definition etc.) in mbigen chip corresponding to a peripheral device. So from software view, the structure likes below mbigen chip |---------------------|-----------------| mbigen device1 mbigen device2 mbigen device3 | | | dev1 dev2 dev3 Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Ma Jun <majun258@huawei.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2015-12-17 19:56:35 +08:00
obj-$(CONFIG_HISILICON_IRQ_MBIGEN) += irq-mbigen.o
irqchip: Add support for ARMv7-M NVIC This interrupt controller is integrated in all Cortex-M3 and Cortex-M4 machines. Support for this controller appeared in Catalin's Cortex tree based on 2.6.33 but was nearly completely rewritten. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: linux-arm-kernel@lists.infradead.org Cc: Jonathan Austin <jonathan.austin@arm.com> Cc: kernel@pengutronix.de Link: http://lkml.kernel.org/r/1372231128-11802-1-git-send-email-u.kleine-koenig@pengutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-06-26 15:18:48 +08:00
obj-$(CONFIG_ARM_NVIC) += irq-nvic.o
irqchip: Move ARM VIC to drivers/irqchip Now that we have drivers/irqchip, move VIC irqchip to drivers/irqchip. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de>
2012-10-28 06:25:26 +08:00
obj-$(CONFIG_ARM_VIC) += irq-vic.o
irqchip/armada-370-xp: Add Kconfig option for the driver Instead of building the irq-armada-370-xp driver directly when CONFIG_ARCH_MVEBU is enabled, this commit introduces an intermediate CONFIG_ARMADA_370_XP_IRQ hidden Kconfig option. This allows this option to select other interrupt-related Kconfig options (which will be needed in follow-up commits) rather than having such selects done from arch/arm/mach-<foo>/. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Link: https://lkml.kernel.org/r/1455115621-22846-2-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2016-02-10 22:46:56 +08:00
obj-$(CONFIG_ARMADA_370_XP_IRQ) += irq-armada-370-xp.o
irqchip: atmel-aic: Add atmel AIC/AIC5 drivers Add AIC (Advanced Interrupt Controller) and AIC5 (AIC5 is an evolution of the AIC block) drivers. Put common code in irq-atmel-aic-common.c/.h so that both driver can access shared functions (this will ease maintenance). These drivers are only compatible with dt enabled board and replace the old implementation found in arch/arm/mach-at91/irq.c. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Link: https://lkml.kernel.org/r/1405012462-766-4-git-send-email-boris.brezillon@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-11 01:14:18 +08:00
obj-$(CONFIG_ATMEL_AIC_IRQ) += irq-atmel-aic-common.o irq-atmel-aic.o
obj-$(CONFIG_ATMEL_AIC5_IRQ) += irq-atmel-aic-common.o irq-atmel-aic5.o
MIPS/irqchip: Move i8259 irqchip driver to drivers/irqchip Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-08 20:46:08 +08:00
obj-$(CONFIG_I8259) += irq-i8259.o
irq-imgpdc: add ImgTec PDC irqchip driver Add irqchip driver for the ImgTec PowerDown Controller (PDC) as found in the TZ1090. The PDC has a number of general system wakeup (SysWake) interrupts (which would for example be connected to a power button or an external peripheral), and a number of peripheral interrupts which can also wake the system but are connected straight to specific low-power peripherals (such as RTC or Infrared). It has a single interrupt output for SysWakes, and individual interrupt outputs for each peripheral. The driver demuxes the SysWake interrupt line, and passes the peripheral interrupts straight through. It also handles the set_wake interrupt operation to enable/disable the appropriate wake event bits. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Rob Landley <rob@landley.net> Cc: linux-metag@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org
2013-04-22 22:43:50 +08:00
obj-$(CONFIG_IMGPDC_IRQ) += irq-imgpdc.o
MIPS/IRQCHIP: Move irq_chip from arch/mips to drivers/irqchip. While at it, rename it because in drivers/irqchip no longer every CPU is a MIPS. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-05-27 00:20:06 +08:00
obj-$(CONFIG_IRQ_MIPS_CPU) += irq-mips-cpu.o
irqchip: Add driver for IXP4xx The IXP4xx (arch/arm/mach-ixp4xx) is an old Intel XScale platform that has very wide deployment and use. As part of modernizing the platform, we need to implement a proper irqchip in the irqchip subsystem. The IXP4xx irqchip is tightly jotted together with the GPIO controller, and whereas in the past we would deal with this complex logic by adding necessarily different code, we can nowadays modernize it using a hierarchical irqchip. The actual IXP4 irqchip is a simple active low level IRQ controller, whereas the GPIO functionality resides in a different memory area and adds edge trigger support for the interrupts. The interrupts from GPIO lines 0..12 are 1:1 mapped to a fixed set of hardware IRQs on this IRQchip, so we expect the child GPIO interrupt controller to go in and allocate descriptors for these interrupts. For the other interrupts, as we do not yet have DT support for this platform, we create a linear irqdomain and then go in and allocate the IRQs that the legacy boards use. This code will be removed on the DT probe path when we add DT support to the platform. We add some translation code for supporting DT translations for the fwnodes, but we leave most of that for later. Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-01-25 23:41:25 +08:00
obj-$(CONFIG_IXP4XX_IRQ) += irq-ixp4xx.o
ARM: sirf: move irq driver to drivers/irqchip This updates the irqchip drier for prima2 to the current practices by moving it into drivers/irqchip and integrating it into the irqchip_init infrastructure. We also now use a linear irq domain as a preparation for sparse IRQ suport. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Gleixner <tglx@linutronix.de>
2013-03-19 18:21:44 +08:00
obj-$(CONFIG_SIRF_IRQ) += irq-sirfsoc.o
irqchip/jcore-aic: Add J-Core AIC driver There are two versions of the J-Core interrupt controller in use, aic1 which generates interrupts with programmable priorities, but only supports 8 irq lines and maps them to cpu traps in the range 17 to 24, and aic2 which uses traps in the range 64-127 and supports up to 128 irqs, with priorities dependent on the interrupt number. The Linux driver does not make use of priorities anyway. For simplicity, there is no aic1-specific logic in the driver beyond setting the priority register, which is necessary for interrupts to work at all. Eventually aic1 will likely be phased out, but it's currently in use in deployments and all released bitstream binaries. Signed-off-by: Rich Felker <dalias@libc.org> Link: https://lkml.kernel.org/r/c3b89ef74aaa6477575dbe2d410eb1d182503243.147018b6529.git.dalias@libc.org Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2016-08-04 12:30:37 +08:00
obj-$(CONFIG_JCORE_AIC) += irq-jcore-aic.o
irqchip: Add RDA8810PL interrupt driver Add interrupt driver for RDA Micro RDA8810PL SoC. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-11 01:35:43 +08:00
obj-$(CONFIG_RDA_INTC) += irq-rda-intc.o
irqchip: Renesas INTC External IRQ pin driver This patch adds a driver for external IRQ pins connected to the INTC block on recent SoCs from Renesas. The INTC hardware block usually contains a rather wide range of features ranging from external IRQ pin handling to legacy interrupt controller support. On older SoCs the INTC is used as a general purpose interrupt controller both for external IRQ pins and on-chip devices. On more recent ARM based SoCs with Cortex-A9 the main interrupt controller is the GIC, but IRQ trigger setup still need to happen in the INTC hardware block. This driver implements the glue code needed to configure IRQ trigger and also handle mask/unmask and demux of external IRQ pins hooked up from the INTC to the GIC. Tested on sh73a0 and r8a7779. The hardware varies quite a bit with SoC model, for instance register width and bitfield widths vary wildly. The driver requires one GIC SPI per external IRQ pin to operate. Each driver instance will handle up to 8 external IRQ pins. The SoCs using this driver are currently mainly used together with regular platform devices so this driver allows configuration via platform data to support things like static interrupt base address. DT support will be added incrementally in the not so distant future. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-02-18 22:28:34 +08:00
obj-$(CONFIG_RENESAS_INTC_IRQPIN) += irq-renesas-intc-irqpin.o
irqchip: Renesas IRQC driver This patch adds a driver for external IRQ pins connected to the IRQC hardware block on recent SoCs from Renesas. The IRQC hardware block is used together with more recent ARM based SoCs using the GIC. As usual the GIC requires external IRQ trigger setup somewhere else which in this particular case happens to be IRQC. This driver implements the glue code needed to configure IRQ trigger and also handle mask/unmask and demux of external IRQ pins hooked up from the IRQC to the GIC. Tested on r8a73a4 but is designed to work with a wide range of SoCs. The driver requires one GIC SPI per external IRQ pin to operate. Each driver instance will handle up to 32 external IRQ pins. The SoCs using this driver are currently mainly used together with regular platform devices so this driver allows configuration via platform data to support things like static interrupt base address. DT support will be added incrementally in the not so distant future. Signed-off-by: Magnus Damm <damm@opensource.se> Tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-02-27 16:15:01 +08:00
obj-$(CONFIG_RENESAS_IRQC) += irq-renesas-irqc.o
irqchip: Add Renesas RZ/A1 Interrupt Controller driver Add a driver for the Renesas RZ/A1 Interrupt Controller. This supports using up to 8 external interrupts on RZ/A1, with configurable sense select. NMI edge select is not yet supported. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Chris Brandt <chris.brandt@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-05-27 20:17:11 +08:00
obj-$(CONFIG_RENESAS_RZA1_IRQC) += irq-renesas-rza1.o
irqchip: Move ARM GIC to drivers/irqchip Now that we have drivers/irqchip, move GIC irqchip to drivers/irqchip. This is necessary to share the GIC with arm and arm64. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de>
2012-11-21 11:21:40 +08:00
obj-$(CONFIG_VERSATILE_FPGA_IRQ) += irq-versatile-fpga.o
irqchip: Add support for TI-NSPIRE irqchip This patch adds support for the interrupt controllers found in some TI-Nspire models. FIQ support was taken out to simplify the driver code and may be added in later. Since Linux on this platform doesn't really use FIQs, this wasn't really that important in the first place. [ tglx: Made zevio_handle_irq static and reordered __init functions ] Signed-off-by: Daniel Tang <dt.tangr@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Link: http://lkml.kernel.org/r/1386223937-12189-1-git-send-email-dt.tangr@gmail.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-12-05 14:12:17 +08:00
obj-$(CONFIG_ARCH_NSPIRE) += irq-zevio.o
irqchip: vt8500: Convert arch-vt8500 to new irqchip infrastructure This patch moves the arch-vt8500 irq code to drivers/irqchip and converts it to use the new IRQCHIP_DECLARE and irqchip_init. This allows the removal of some more functions from common.h Signed-off-by: Tony Prisk <linux@prisktech.co.nz> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-03-24 09:12:25 +08:00
obj-$(CONFIG_ARCH_VT8500) += irq-vt8500.o
irqchip: st: Supply new driver for STi based devices This driver is used to enable System Configuration Register controlled External, CTI (Core Sight), PMU (Performance Management), and PL310 L2 Cache IRQs prior to use. Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lkml.kernel.org/r/1424272444-16230-3-git-send-email-lee.jones@linaro.org Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2015-02-18 23:13:58 +08:00
obj-$(CONFIG_ST_IRQCHIP) += irq-st.o
irqchip/tango: Add support for Sigma Designs SMP86xx/SMP87xx interrupt controller This adds support for the secondary interrupt controller used in Sigma Designs SMP86xx and SMP87xx chips. Signed-off-by: Mans Rullgard <mans@mansr.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1453313237-18570-2-git-send-email-mans@mansr.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2016-01-21 02:07:17 +08:00
obj-$(CONFIG_TANGO_IRQ) += irq-tango.o
irqchip: Add TB10x interrupt controller driver The SOC interrupt controller driver for the Abilis Systems TB10x series of SOCs based on ARC700 CPUs. Signed-off-by: Christian Ruppert <christian.ruppert@abilis.com> Signed-off-by: Pierrick Hascoet <pierrick.hascoet@abilis.com> Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Rob Landley <rob@landley.net> Cc: devicetree-discuss@lists.ozlabs.org Link: http://lkml.kernel.org/r/1372177797-9458-1-git-send-email-christian.ruppert@abilis.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-06-26 00:29:57 +08:00
obj-$(CONFIG_TB10X_IRQC) += irq-tb10x.o
irqchip/ts4800: Add TS-4800 interrupt controller This commit adds support for the TS-4800 interrupt controller. This controller is instantiated in a companion FPGA, and multiplex interrupts for other FPGA IPs. As this component is external to the SoC, the SoC might need to reserve pins, so this controller is implemented as a platform driver and doesn't use the IRQCHIP_DECLARE construct. Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: kernel@savoirfairelinux.com Link: http://lkml.kernel.org/r/1450728683-31416-2-git-send-email-damien.riegel@savoirfairelinux.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-12-22 04:11:23 +08:00
obj-$(CONFIG_TS4800_IRQ) += irq-ts4800.o
xtensa: move built-in PIC to drivers/irqchip Extract xtensa built-in interrupt controller implementation from xtensa/kernel/irq.c and move it to other irqchips, providing way to instantiate it from the device tree. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2013-12-01 16:59:49 +08:00
obj-$(CONFIG_XTENSA) += irq-xtensa-pic.o
xtensa: add MX irqchip MX is an interrupt distributor used in some SMP-capable xtensa configurations. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Chris Zankel <chris@zankel.net>
2013-12-01 16:04:57 +08:00
obj-$(CONFIG_XTENSA_MX) += irq-xtensa-mx.o
microblaze/irqchip: Move intc driver to irqchip The Xilinx AXI Interrupt Controller IP block is used by the MIPS based xilfpga platform and a few PowerPC based platforms. Move the interrupt controller code out of arch/microblaze so that it can be used by everyone Tested-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-11-14 20:13:45 +08:00
obj-$(CONFIG_XILINX_INTC) += irq-xilinx-intc.o
DRIVERS: IRQCHIP: CROSSBAR: Add support for Crossbar IP Some socs have a large number of interrupts requests to service the needs of its many peripherals and subsystems. All of the interrupt lines from the subsystems are not needed at the same time, so they have to be muxed to the irq-controller appropriately. In such places a interrupt controllers are preceded by an CROSSBAR that provides flexibility in muxing the device requests to the controller inputs. This driver takes care a allocating a free irq and then configuring the crossbar IP as a part of the mpu's irqchip callbacks. crossbar_init should be called right before the irqchip_init, so that it is setup to handle the irqchip callbacks. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Sricharan R <r.sricharan@ti.com> Acked-by: Kumar Gala <galak@codeaurora.org> (for DT binding portion) Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Thomas Gleixner <tglx@linutronix.de>
2013-12-03 18:27:23 +08:00
obj-$(CONFIG_IRQ_CROSSBAR) += irq-crossbar.o
irqchip: vf610-mscm-ir: Add support for Vybrid MSCM interrupt router This adds support for Vybrid's interrupt router. On VF6xx models, almost all peripherals can be used by either of the two CPU's, the Cortex-A5 or the Cortex-M4. The interrupt router routes the peripheral interrupts to the configured CPU. This IRQ chip driver configures the interrupt router to route the requested interrupt to the CPU the kernel is running on. The driver makes use of the irqdomain hierarchy support. The parent is given by the device tree. This should be one of the two possible parents either ARM GIC or the ARM NVIC interrupt controller. The latter is currently not yet supported. Note that there is no resource control mechnism implemented to avoid concurrent access of the same peripheral. The user needs to make sure to use device trees which assign the peripherals orthogonally. However, this driver warns the user in case the interrupt is already configured for the other CPU. This provides a poor man's resource controller. Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Stefan Agner <stefan@agner.ch> Link: https://lkml.kernel.org/r/1425249689-32354-2-git-send-email-stefan@agner.ch Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2015-03-02 06:41:27 +08:00
obj-$(CONFIG_SOC_VF610) += irq-vf610-mscm-ir.o
irqchips/bmips: Add bcm6345-l1 interrupt controller Add the BCM6345 interrupt controller based on the SMP-capable BCM7038 and the BCM3380 but with packed interrupt registers. Add the BCM6345 interrupt controller to a list with the existing BCM7038 so that interrupts on CPU1 are not ignored. Update the maintainers file list for BMIPS to include this driver. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Pawel Moll <pawel.moll@arm.com> Cc: linux-mips@linux-mips.org Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Jonas Gorski <jogo@openwrt.org> Cc: Kumar Gala <galak@codeaurora.org> Cc: Rob Herring <robh@kernel.org> Link: http://lkml.kernel.org/r/5651D176.6030908@simon.arlott.org.uk Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-11-22 22:30:14 +08:00
obj-$(CONFIG_BCM6345_L1_IRQ) += irq-bcm6345-l1.o
IRQCHIP: Add new driver for BCM7038-style level 1 interrupt controllers This is the main peripheral IRQ controller on the BCM7xxx MIPS chips; it has the following characteristics: - 64 to 160+ level IRQs - Atomic set/clear registers - Reasonably predictable register layout (N status words, then N mask status words, then N mask set words, then N mask clear words) - SMP affinity supported on most systems - Typically connected to MIPS IRQ 2,3,2,3 on CPUs 0,1,2,3 This driver registers one IRQ domain and one IRQ chip to cover all instances of the block. Up to 4 instances of the block may appear, as it supports 4-way IRQ affinity on BCM7435. The same block exists on the ARM BCM7xxx chips, but typically the ARM GIC is used instead. So this driver is primarily intended for MIPS STB chips. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: f.fainelli@gmail.com Cc: jaedon.shin@gmail.com Cc: abrestic@chromium.org Cc: tglx@linutronix.de Cc: jason@lakedaemon.net Cc: jogo@openwrt.org Cc: arnd@arndb.de Cc: computersforpeace@gmail.com Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8844/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-12-26 01:49:06 +08:00
obj-$(CONFIG_BCM7038_L1_IRQ) += irq-bcm7038-l1.o
irqchip: bcm7120-l2: Decouple driver from brcmstb-l2 Some chips, such as BCM6328, only require bcm7120-l2. Some BCM7xxx STB configurations only require brcmstb-l2. Treat them as two separate entities, and update the mach-bcm dependencies to reflect the change. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lkml.kernel.org/r/1415342669-30640-13-git-send-email-cernekee@gmail.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-07 14:44:27 +08:00
obj-$(CONFIG_BCM7120_L2_IRQ) += irq-bcm7120-l2.o
obj-$(CONFIG_BRCMSTB_L2_IRQ) += irq-brcmstb-l2.o
irqchip: keystone: Add irq controller ip driver On Keystone SOCs, DSP cores can send interrupts to ARM host using the IRQ controller IP. It provides 28 IRQ signals to ARM. The IRQ handler running on HOST OS can identify DSP signal source by analyzing SRCCx bits in IPCARx registers. This is one of the component used by the IPC mechanism used on Keystone SOCs. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Link: https://lkml.kernel.org/r/1406126430-9978-1-git-send-email-grygorii.strashko@ti.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-23 22:40:30 +08:00
obj-$(CONFIG_KEYSTONE_IRQ) += irq-keystone.o
MIPS: Move GIC to drivers/irqchip/ Move GIC irqchip support to drivers/irqchip/ and rename the Kconfig option from IRQ_GIC to MIPS_GIC to avoid confusion with the ARM GIC. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Acked-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Qais Yousef <qais.yousef@imgtec.com> Tested-by: Qais Yousef <qais.yousef@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jeffrey Deans <jeffrey.deans@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: John Crispin <blogic@openwrt.org> Cc: David Daney <ddaney.cavm@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7812/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-09-19 05:47:19 +08:00
obj-$(CONFIG_MIPS_GIC) += irq-mips-gic.o
irqchip: Add Mediatek mtk-cirq driver In Mediatek SOCs, the CIRQ is a low power interrupt controller designed to works outside MCUSYS which comprises with Cortex-Ax cores,CCI and GIC. The CIRQ controller is integrated in between MCUSYS( include Cortex-Ax, CCI and GIC ) and interrupt sources as the second level interrupt controller. The external interrupts which outside MCUSYS will feed through CIRQ then bypass to GIC. CIRQ can monitors all edge trigger interupts. When an edge interrupt is triggered, CIRQ can record the status and generate a pulse signal to GIC when flush command executed. When system enters sleep mode, MCUSYS will be turned off to improve power consumption, also GIC is power down. The edge trigger interrupts will be lost in this scenario without CIRQ. This commit provides the CIRQ irqchip implement. Signed-off-by: Youlin Pei <youlin.pei@mediatek.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-04-07 16:06:36 +08:00
obj-$(CONFIG_ARCH_MEDIATEK) += irq-mtk-sysirq.o irq-mtk-cirq.o
irqchip: Conexant CX92755 interrupts controller driver Add interrupt controller driver to the Conexant CX92755 SoC, part of the Digicolor SoCs series. Use the generic irq framework support. Use syscon to access the system global UC_IRQ_CONTROL register. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Cc: linux-arm-kernel@lists.infradead.org Cc: Arnd Bergmann <arnd@arndb.de> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/5b769e3c23dfa5fde08c4f3bc966c2c2b3921d8a.1421317616.git.baruch@tkos.co.il Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-01-15 18:34:00 +08:00
obj-$(CONFIG_ARCH_DIGICOLOR) += irq-digicolor.o
h8300: IRQ chip driver Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
2015-05-10 01:30:47 +08:00
obj-$(CONFIG_RENESAS_H8300H_INTC) += irq-renesas-h8300h.o
obj-$(CONFIG_RENESAS_H8S_INTC) += irq-renesas-h8s.o
ARM: 8368/1: sa1100: move irq driver to drivers/irqchip/ Move current sa11x0 IRQ driver to the irqchip subsystem. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-05-19 23:17:09 +08:00
obj-$(CONFIG_ARCH_SA1100) += irq-sa11x0.o
MIPS/IRQCHIP: Move Ingenic SoC intc driver to drivers/irqchip Move the driver for Ingenic SoC interrupt controllers into drivers/irqchip where it belongs. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Brian Norris <computersforpeace@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/10147/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-05-24 23:11:31 +08:00
obj-$(CONFIG_INGENIC_IRQ) += irq-ingenic.o
irqchip: Add irq-ingenic-tcu driver This driver handles the interrupt controller built in the Timer/Counter Unit (TCU) of the JZ47xx SoCs from Ingenic. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Mathieu Malaterre <malat@debian.org> Tested-by: Artur Rojek <contact@artur-rojek.eu> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Lee Jones <lee.jones@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-mips@vger.kernel.org Cc: linux-clk@vger.kernel.org Cc: od@zcrc.me
2019-07-25 01:16:08 +08:00
obj-$(CONFIG_INGENIC_TCU_IRQ) += irq-ingenic-tcu.o
irqchip/imx-gpcv2: IMX GPCv2 driver for wakeup sources IMX7D contains a new version of GPC IP block (GPCv2). It has two major functions: power management and wakeup source management. When the system is in WFI (wait for interrupt) mode, the GPC block will be the first block on the platform to be activated and signaled. In normal wait mode during cpu idle, the system can be woken up by any enabled interrupts. In standby or suspend mode, the system can only be wokem up by the pre-defined wakeup sources. Based-on-patch-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shenwei Wang <shenwei.wang@freescale.com> Cc: <linux-arm-kernel@lists.infradead.org> Cc: <shawn.guo@linaro.org> Cc: <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1440443055-7291-1-git-send-email-shenwei.wang@freescale.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-08-25 03:04:15 +08:00
obj-$(CONFIG_IMX_GPCV2) += irq-imx-gpcv2.o
IRQCHIP: irq-pic32-evic: Add support for PIC32 interrupt controller This adds support for the interrupt controller present on PIC32 class devices. It handles all internal and external interrupts. This controller exists outside of the CPU core and is the arbitrator of all interrupts (including interrupts from the CPU itself) before they are presented to the CPU. The following features are supported: - DT properties for EVIC and for devices/peripherals that use interrupt lines - Persistent and non-persistent interrupt handling - irqdomain and generic chip support - Configuration of external interrupt edge polarity Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12092/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-14 09:15:35 +08:00
obj-$(CONFIG_PIC32_EVIC) += irq-pic32-evic.o
irqchip: Add a driver for the Microsemi Ocelot controller The Microsemi Ocelot SoC has a pretty simple IRQ controller in its ICPU block. Add a driver for it. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-22 23:15:24 +08:00
obj-$(CONFIG_MSCC_OCELOT_IRQ) += irq-mscc-ocelot.o
irqchip/irq-mvebu-gicp: Add new driver for Marvell GICP This commit adds a simple driver for the Marvell GICP, a hardware unit that converts memory writes into GIC SPI interrupts. The driver provides a number of functions to the ICU driver to allocate GICP interrupts, and get the physical addresses that the ICUs should write to to set/clear interrupts. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-06-21 21:29:14 +08:00
obj-$(CONFIG_MVEBU_GICP) += irq-mvebu-gicp.o
irqchip/irq-mvebu-icu: Add new driver for Marvell ICU The Marvell ICU unit is found in the CP110 block of the Marvell Armada 7K and 8K SoCs. It collects the wired interrupts of the devices located in the CP110 and turns them into SPI interrupts in the GIC located in the AP806 side of the SoC, by using a memory transaction. Until now, the ICU was configured in a static fashion by the firmware, and Linux was relying on this static configuration. By having Linux configure the ICU, we are more flexible, and we can allocate dynamically the GIC SPI interrupts only for devices that are actually in use. The driver was initially written by Hanna Hawa <hannah@marvell.com>. Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-06-21 21:29:15 +08:00
obj-$(CONFIG_MVEBU_ICU) += irq-mvebu-icu.o
irqchip/mvebu-odmi: Add new driver for platform MSI on Marvell 7K/8K This commits adds a new irqchip driver that handles the ODMI controller found on Marvell 7K/8K processors. The ODMI controller provide MSI interrupt functionality to on-board peripherals, much like the GIC-v2m. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1455888883-5127-1-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2016-02-19 21:34:43 +08:00
obj-$(CONFIG_MVEBU_ODMI) += irq-mvebu-odmi.o
irqchip/mvebu-pic: New driver for Marvell Armada 7K/8K PIC The Marvell Armada 7K/8K integrates a secondary interrupt controller very originally named "PIC". It is connected to the main GIC via a PPI. Amongst other things, this PIC is used for the ARM PMU. This commit adds a simple irqchip driver for this interrupt controller. Since this interrupt controller is not needed early at boot time, we make the driver a proper platform driver rather than use the IRQCHIP_DECLARE() mechanism. Signed-off-by: Yehuda Yitschak <yehuday@marvell.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Link: https://lkml.kernel.org/r/1470408921-447-3-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2016-08-05 22:55:19 +08:00
obj-$(CONFIG_MVEBU_PIC) += irq-mvebu-pic.o
irqchip/irq-mvebu-sei: Add new driver for Marvell SEI This is a cascaded interrupt controller in the AP806 GIC that collapses SEIs (System Error Interrupt) coming from the AP and the CPs (through the ICU). The SEI handles up to 64 interrupts. The first 21 interrupts are wired from the AP. The next 43 interrupts are from the CPs and are triggered through MSI messages. To handle this complexity, the driver has to declare to the upper layer: one IRQ domain for the wired interrupts, one IRQ domain for the MSIs; and acts as a MSI controller ('parent') by declaring an MSI domain. Suggested-by: Haim Boot <hayim@marvell.com> Suggested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-10-01 22:13:51 +08:00
obj-$(CONFIG_MVEBU_SEI) += irq-mvebu-sei.o
irqchip: Add Layerscape SCFG MSI controller support Some kind of Freescale Layerscape SoC provides a MSI implementation which uses two SCFG registers MSIIR and MSIR to support 32 MSI interrupts for each PCIe controller. The patch is to support it. Signed-off-by: Minghuan Lian <Minghuan.Lian@nxp.com> Tested-by: Alexander Stein <alexander.stein@systec-electronic.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2016-03-23 19:08:20 +08:00
obj-$(CONFIG_LS_SCFG_MSI) += irq-ls-scfg-msi.o
irqchip: add nps Internal and external irqchips Adding EZchip NPS400 support. Internal interrupts are handled by Multi Thread Manager (MTM) Once interrupt is serviced MTM is acked for deactivating the interrupt. External interrupts are handled by MTM as well as at Global Interrupt Controller (GIC) e.g. serial and network devices. Signed-off-by: Noam Camus <noamc@ezchip.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Cc: Thomas Gleixner <tglx@linutronix.de>
2015-10-29 06:26:22 +08:00
obj-$(CONFIG_EZNPS_GIC) += irq-eznps.o
irqchip/aspeed-i2c-ic: Add I2C IRQ controller for Aspeed The Aspeed 24XX/25XX chips share a single hardware interrupt across 14 separate I2C busses. This adds a dummy irqchip which maps the single hardware interrupt to software interrupts for each of the busses. Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-06-03 09:29:49 +08:00
obj-$(CONFIG_ARCH_ASPEED) += irq-aspeed-vic.o irq-aspeed-i2c-ic.o
drivers/irqchip: Add STM32 external interrupts support The STM32 external interrupt controller consists of edge detectors that generate interrupts requests or wake-up events. Each line can be independently configured as interrupt or wake-up source, and triggers either on rising, falling or both edges. Each line can also be masked independently. Originally-from: Maxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: Jason Cooper <jason@lakedaemon.net> Cc: arnd@arndb.de Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: bruherrera@gmail.com Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Cc: Rob Herring <robh+dt@kernel.org> Cc: lee.jones@linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1474387259-18926-3-git-send-email-alexandre.torgue@st.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-21 00:00:57 +08:00
obj-$(CONFIG_STM32_EXTI) += irq-stm32-exti.o
irqchip/qcom: Add IRQ combiner driver Driver for interrupt combiners in the Top-level Control and Status Registers (TCSR) hardware block in Qualcomm Technologies chips. An interrupt combiner in this block combines a set of interrupts by OR'ing the individual interrupt signals into a summary interrupt signal routed to a parent interrupt controller, and provides read- only, 32-bit registers to query the status of individual interrupts. The status bit for IRQ n is bit (n % 32) within register (n / 32) of the given combiner. Thus, each combiner can be described as a set of register offsets and the number of IRQs managed. Signed-off-by: Agustin Vega-Frias <agustinv@codeaurora.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-02-03 07:23:59 +08:00
obj-$(CONFIG_QCOM_IRQ_COMBINER) += qcom-irq-combiner.o
irqchip: Add UniPhier AIDET irqchip driver UniPhier SoCs contain AIDET (ARM Interrupt Detector). This is intended to provide additional features that are not covered by GIC. The main purpose is to provide logic inverter to support low level and falling edge trigger types for interrupt lines from on-board devices. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-23 09:31:47 +08:00
obj-$(CONFIG_IRQ_UNIPHIER_AIDET) += irq-uniphier-aidet.o
irqchip/exiu: Add support for Socionext Synquacer EXIU controller The Socionext Synquacer SoC has an external interrupt unit (EXIU) that forwards a block of 32 configurable input lines to 32 adjacent level-high type GICv3 SPIs. The EXIU has per-interrupt level/edge and polarity controls, and mask bits that keep the outgoing lines de-asserted, even though the controller may still latch interrupt conditions that occur while the line is masked. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-11-07 02:34:37 +08:00
obj-$(CONFIG_ARCH_SYNQUACER) += irq-sni-exiu.o
irqchip/meson: Add support for gpio interrupt controller Add support for the interrupt gpio controller found on Amlogic's meson SoC family. This controller is a separate controller from the gpio controller. It is able to spy on the SoC pad. It is essentially a 256 to 8 router with a filtering block to select level or edge and polarity. The number of actual mappable inputs depends on the SoC. Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-09-18 21:46:10 +08:00
obj-$(CONFIG_MESON_IRQ_GPIO) += irq-meson-gpio.o
irqchip/irq-goldfish-pic: Add Goldfish PIC driver Add device driver for a virtual programmable interrupt controller The virtual PIC is designed as a device tree-based interrupt controller. The compatible string used by OS for binding the driver is "google,goldfish-pic". Signed-off-by: Miodrag Dinic <miodrag.dinic@mips.com> Signed-off-by: Goran Ferenc <goran.ferenc@mips.com> Signed-off-by: Aleksandar Markovic <aleksandar.markovic@mips.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2017-12-29 23:41:46 +08:00
obj-$(CONFIG_GOLDFISH_PIC) += irq-goldfish-pic.o
irqchip: Andestech Internal Vector Interrupt Controller driver This patch adds the Andestech Internal Vector Interrupt Controller driver. You can find the spec here. Ch4.9 of AndeStar SPA V3 Manual. http://www.andestech.com/product.php?cls=9 Signed-off-by: Rick Chen <rick@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
2017-10-25 15:42:51 +08:00
obj-$(CONFIG_NDS32) += irq-ativic32.o
irqchip/pdc: Add PDC interrupt controller for QCOM SoCs The Power Domain Controller (PDC) on QTI SoCs like SDM845 houses an interrupt controller along with other domain control functions to handle interrupt related functions like handle falling edge or active low which are not detected at the GIC and handle wakeup interrupts. The interrupt controller is on an always-on domain for the purpose of waking up the processor. Only a subset of the processor's interrupts are routed through the PDC to the GIC. The PDC powers on the processors' domain, when in low power mode and replays pending interrupts so the GIC may wake up the processor. Signed-off-by: Archana Sathyakumar <asathyak@codeaurora.org> Signed-off-by: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-03-01 01:27:29 +08:00
obj-$(CONFIG_QCOM_PDC) += qcom-pdc.o
irqchip: add C-SKY SMP interrupt controller The driver is for C-SKY SMP interrupt controller. It support 16 soft-irqs, 16 private-irqs, and 992 max external-irqs, a total of 1024 interrupts. C-SKY CPU 807/810/860 SMP/non-SMP could use it. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
2018-09-16 15:57:14 +08:00
obj-$(CONFIG_CSKY_MPINTC) += irq-csky-mpintc.o
irqchip: add C-SKY APB bus interrupt controller The driver is for C-SKY APB bus interrupt controller. It's a simple interrupt controller which use pending reg to detect the irq and use enable/disable reg to mask/unmask interrupt sources. A lot of SOCs based on C-SKY CPU use the interrupt controller as root controller. Signed-off-by: Guo Ren <ren_guo@c-sky.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com>
2018-09-16 15:57:14 +08:00
obj-$(CONFIG_CSKY_APB_INTC) += irq-csky-apb-intc.o
irqchip: add a SiFive PLIC driver Add a driver for the SiFive implementation of the RISC-V Platform Level Interrupt Controller (PLIC). The PLIC connects global interrupt sources to the local interrupt controller on each hart. This driver is based on the driver in the RISC-V tree from Palmer Dabbelt, but has been almost entirely rewritten since, and includes many fixes from Atish Patra. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Atish Patra <atish.patra@wdc.com> [Binding update by Palmer] Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-07-26 22:27:00 +08:00
obj-$(CONFIG_SIFIVE_PLIC) += irq-sifive-plic.o
irqchip: Add driver for imx-irqsteer controller The irqsteer block is a interrupt multiplexer/remapper found on the i.MX8 line of SoCs. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-17 22:01:20 +08:00
obj-$(CONFIG_IMX_IRQSTEER) += irq-imx-irqsteer.o
irqchip: Add driver for Cirrus Logic Madera codecs The Cirrus Logic Madera codecs (Cirrus Logic CS47L35/85/90/91 and WM1840) are highly complex devices containing up to 7 programmable DSPs and many other internal sources of interrupts plus a number of GPIOs that can be used as interrupt inputs. The large number (>150) of internal interrupt sources are managed by an on-board interrupt controller. This driver provides the handling for the interrupt controller. As the codec is accessed via regmap, we can make use of the generic IRQ functionality from regmap to do most of the work. Only around half of the possible interrupt source are currently of interest from the driver so only this subset is defined. Others can be added in future if needed. The KConfig options are not user-configurable because this driver is mandatory so is automatically included when the parent MFD driver is selected. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-14 22:44:16 +08:00
obj-$(CONFIG_MADERA_IRQ) += irq-madera.o
irqchip: Add driver for Loongson-1 interrupt controller This controller appeared on Loongson-1 family MCUs including Loongson-1B and Loongson-1C. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-02-01 14:22:35 +08:00
obj-$(CONFIG_LS1X_IRQ) += irq-ls1x.o
irqchip/ti-sci-intr: Add support for Interrupt Router driver Texas Instruments' K3 generation SoCs has an IP Interrupt Router that does allows for redirection of input interrupts to host interrupt controller. Interrupt Router inputs are either from a peripheral or from an Interrupt Aggregator which is another interrupt controller. Configuration of the interrupt router registers can only be done by a system co-processor and the driver needs to send a message to this co processor over TISCI protocol. Add support for Interrupt Router driver over TISCI protocol. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-04-30 18:12:25 +08:00
obj-$(CONFIG_TI_SCI_INTR_IRQCHIP) += irq-ti-sci-intr.o
irqchip/ti-sci-inta: Add support for Interrupt Aggregator driver Texas Instruments' K3 generation SoCs has an IP Interrupt Aggregator which is an interrupt controller that does the following: - Converts events to interrupts that can be understood by an interrupt router. - Allows for multiplexing of events to interrupts. Configuration of the interrupt aggregator registers can only be done by a system co-processor and the driver needs to send a message to this co processor over TISCI protocol. Add the required infrastructure to allow the allocation and routing of these events. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-04-30 18:12:27 +08:00
obj-$(CONFIG_TI_SCI_INTA_IRQCHIP) += irq-ti-sci-inta.o