2017-11-03 18:28:30 +08:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
2013-12-06 22:13:07 +08:00
|
|
|
/*
|
|
|
|
* Tahvo USB transceiver driver
|
|
|
|
*
|
|
|
|
* Copyright (C) 2005-2006 Nokia Corporation
|
|
|
|
*
|
|
|
|
* Parts copied from isp1301_omap.c.
|
|
|
|
* Copyright (C) 2004 Texas Instruments
|
|
|
|
* Copyright (C) 2004 David Brownell
|
|
|
|
*
|
|
|
|
* Original driver written by Juha Yrjölä, Tony Lindgren and Timo Teräs.
|
|
|
|
* Modified for Retu/Tahvo MFD by Aaro Koskinen.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/io.h>
|
|
|
|
#include <linux/clk.h>
|
|
|
|
#include <linux/usb.h>
|
2017-09-21 11:11:24 +08:00
|
|
|
#include <linux/extcon-provider.h>
|
2013-12-06 22:13:07 +08:00
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/usb/otg.h>
|
|
|
|
#include <linux/mfd/retu.h>
|
|
|
|
#include <linux/usb/gadget.h>
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
|
|
|
|
#define DRIVER_NAME "tahvo-usb"
|
|
|
|
|
|
|
|
#define TAHVO_REG_IDSR 0x02
|
|
|
|
#define TAHVO_REG_USBR 0x06
|
|
|
|
|
|
|
|
#define USBR_SLAVE_CONTROL (1 << 8)
|
|
|
|
#define USBR_VPPVIO_SW (1 << 7)
|
|
|
|
#define USBR_SPEED (1 << 6)
|
|
|
|
#define USBR_REGOUT (1 << 5)
|
|
|
|
#define USBR_MASTER_SW2 (1 << 4)
|
|
|
|
#define USBR_MASTER_SW1 (1 << 3)
|
|
|
|
#define USBR_SLAVE_SW (1 << 2)
|
|
|
|
#define USBR_NSUSPEND (1 << 1)
|
|
|
|
#define USBR_SEMODE (1 << 0)
|
|
|
|
|
|
|
|
#define TAHVO_MODE_HOST 0
|
|
|
|
#define TAHVO_MODE_PERIPHERAL 1
|
|
|
|
|
|
|
|
struct tahvo_usb {
|
|
|
|
struct platform_device *pt_dev;
|
|
|
|
struct usb_phy phy;
|
|
|
|
int vbus_state;
|
|
|
|
struct mutex serialize;
|
|
|
|
struct clk *ick;
|
|
|
|
int irq;
|
|
|
|
int tahvo_mode;
|
2015-07-01 12:11:32 +08:00
|
|
|
struct extcon_dev *extcon;
|
2013-12-06 22:13:07 +08:00
|
|
|
};
|
|
|
|
|
2015-06-12 10:10:06 +08:00
|
|
|
static const unsigned int tahvo_cable[] = {
|
extcon: Use the unique id for external connector instead of string
This patch uses the unique id to identify the type of external connector instead
of string name. The string name have the many potential issues. So, this patch
defines the 'extcon' enumeration which includes all supported external connector
on EXTCON subsystem. If new external connector is necessary, the unique id of
new connector have to be added in 'extcon' enumeration. There are current
supported external connector in 'enum extcon' as following:
enum extcon {
EXTCON_NONE = 0x0,
/* USB external connector */
EXTCON_USB = 0x1,
EXTCON_USB_HOST = 0x2,
/* Charger external connector */
EXTCON_TA = 0x10,
EXTCON_FAST_CHARGER = 0x11,
EXTCON_SLOW_CHARGER = 0x12,
EXTCON_CHARGE_DOWNSTREAM = 0x13,
/* Audio and video external connector */
EXTCON_LINE_IN = 0x20,
EXTCON_LINE_OUT = 0x21,
EXTCON_MICROPHONE = 0x22,
EXTCON_HEADPHONE = 0x23,
EXTCON_HDMI = 0x30,
EXTCON_MHL = 0x31,
EXTCON_DVI = 0x32,
EXTCON_VGA = 0x33,
EXTCON_SPDIF_IN = 0x34,
EXTCON_SPDIF_OUT = 0x35,
EXTCON_VIDEO_IN = 0x36,
EXTCON_VIDEO_OUT = 0x37,
/* Miscellaneous external connector */
EXTCON_DOCK = 0x50,
EXTCON_JIG = 0x51,
EXTCON_MECHANICAL = 0x52,
EXTCON_END,
};
For example in extcon-arizona.c:
To use unique id removes the potential issue about handling
the inconsistent name of external connector with string.
- Previously, use the string to register the type of arizona jack connector
static const char *arizona_cable[] = {
"Mechanical",
"Microphone",
"Headphone",
"Line-out",
};
- Newly, use the unique id to register the type of arizona jack connector
static const enum extcon arizona_cable[] = {
EXTCON_MECHANICAL,
EXTCON_MICROPHONE,
EXTCON_HEADPHONE,
EXTCON_LINE_OUT,
EXTCON_NONE,
};
And this patch modify the prototype of extcon_{get|set}_cable_state_() which
uses the 'enum extcon id' instead of 'cable_index'. Because although one more
extcon drivers support USB cable, each extcon driver might has the differnt
'cable_index' for USB cable. All extcon drivers can use the unique id number
for same external connector with modified extcon_{get|set}_cable_state_().
- Previously, use 'cable_index' on these functions:
extcon_get_cable_state_(struct extcon_dev*, int cable_index)
extcon_set_cable_state_(struct extcon_dev*, int cable_index, bool state)
-Newly, use 'enum extcon id' on these functions:
extcon_get_cable_state_(struct extcon_dev*, enum extcon id)
extcon_set_cable_state_(struct extcon_dev*, enum extcon id, bool state)
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
[arnd: Report the build break about drivers/usb/phy/phy-tahvo.c after using the
unique id for external connector insteadf of string]
Reported-by: Arnd Bergmann <arnd@arndb.de>
[dan.carpenter: Report the build warning of extcon_{set|get}_cable_state_()]
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
2015-04-24 18:16:05 +08:00
|
|
|
EXTCON_USB,
|
|
|
|
EXTCON_USB_HOST,
|
|
|
|
|
|
|
|
EXTCON_NONE,
|
2013-12-06 22:13:07 +08:00
|
|
|
};
|
|
|
|
|
2018-01-23 18:24:06 +08:00
|
|
|
static ssize_t vbus_show(struct device *device,
|
2013-12-06 22:13:07 +08:00
|
|
|
struct device_attribute *attr, char *buf)
|
|
|
|
{
|
|
|
|
struct tahvo_usb *tu = dev_get_drvdata(device);
|
|
|
|
return sprintf(buf, "%s\n", tu->vbus_state ? "on" : "off");
|
|
|
|
}
|
2018-01-23 18:24:06 +08:00
|
|
|
static DEVICE_ATTR_RO(vbus);
|
2013-12-06 22:13:07 +08:00
|
|
|
|
|
|
|
static void check_vbus_state(struct tahvo_usb *tu)
|
|
|
|
{
|
|
|
|
struct retu_dev *rdev = dev_get_drvdata(tu->pt_dev->dev.parent);
|
|
|
|
int reg, prev_state;
|
|
|
|
|
|
|
|
reg = retu_read(rdev, TAHVO_REG_IDSR);
|
|
|
|
if (reg & TAHVO_STAT_VBUS) {
|
2014-10-31 01:41:13 +08:00
|
|
|
switch (tu->phy.otg->state) {
|
2013-12-06 22:13:07 +08:00
|
|
|
case OTG_STATE_B_IDLE:
|
|
|
|
/* Enable the gadget driver */
|
|
|
|
if (tu->phy.otg->gadget)
|
|
|
|
usb_gadget_vbus_connect(tu->phy.otg->gadget);
|
2014-10-31 01:41:13 +08:00
|
|
|
tu->phy.otg->state = OTG_STATE_B_PERIPHERAL;
|
2014-11-25 01:24:59 +08:00
|
|
|
usb_phy_set_event(&tu->phy, USB_EVENT_ENUMERATED);
|
2013-12-06 22:13:07 +08:00
|
|
|
break;
|
|
|
|
case OTG_STATE_A_IDLE:
|
|
|
|
/*
|
|
|
|
* Session is now valid assuming the USB hub is driving
|
|
|
|
* Vbus.
|
|
|
|
*/
|
2014-10-31 01:41:13 +08:00
|
|
|
tu->phy.otg->state = OTG_STATE_A_HOST;
|
2013-12-06 22:13:07 +08:00
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
dev_info(&tu->pt_dev->dev, "USB cable connected\n");
|
|
|
|
} else {
|
2014-10-31 01:41:13 +08:00
|
|
|
switch (tu->phy.otg->state) {
|
2013-12-06 22:13:07 +08:00
|
|
|
case OTG_STATE_B_PERIPHERAL:
|
|
|
|
if (tu->phy.otg->gadget)
|
|
|
|
usb_gadget_vbus_disconnect(tu->phy.otg->gadget);
|
2014-10-31 01:41:13 +08:00
|
|
|
tu->phy.otg->state = OTG_STATE_B_IDLE;
|
2014-11-25 01:24:59 +08:00
|
|
|
usb_phy_set_event(&tu->phy, USB_EVENT_NONE);
|
2013-12-06 22:13:07 +08:00
|
|
|
break;
|
|
|
|
case OTG_STATE_A_HOST:
|
2014-10-31 01:41:13 +08:00
|
|
|
tu->phy.otg->state = OTG_STATE_A_IDLE;
|
2013-12-06 22:13:07 +08:00
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
dev_info(&tu->pt_dev->dev, "USB cable disconnected\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
prev_state = tu->vbus_state;
|
|
|
|
tu->vbus_state = reg & TAHVO_STAT_VBUS;
|
|
|
|
if (prev_state != tu->vbus_state) {
|
2017-01-16 20:37:01 +08:00
|
|
|
extcon_set_state_sync(tu->extcon, EXTCON_USB, tu->vbus_state);
|
2013-12-06 22:13:07 +08:00
|
|
|
sysfs_notify(&tu->pt_dev->dev.kobj, NULL, "vbus_state");
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void tahvo_usb_become_host(struct tahvo_usb *tu)
|
|
|
|
{
|
|
|
|
struct retu_dev *rdev = dev_get_drvdata(tu->pt_dev->dev.parent);
|
|
|
|
|
2017-01-16 20:37:01 +08:00
|
|
|
extcon_set_state_sync(tu->extcon, EXTCON_USB_HOST, true);
|
2013-12-06 22:13:07 +08:00
|
|
|
|
|
|
|
/* Power up the transceiver in USB host mode */
|
|
|
|
retu_write(rdev, TAHVO_REG_USBR, USBR_REGOUT | USBR_NSUSPEND |
|
|
|
|
USBR_MASTER_SW2 | USBR_MASTER_SW1);
|
2014-10-31 01:41:13 +08:00
|
|
|
tu->phy.otg->state = OTG_STATE_A_IDLE;
|
2013-12-06 22:13:07 +08:00
|
|
|
|
|
|
|
check_vbus_state(tu);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void tahvo_usb_stop_host(struct tahvo_usb *tu)
|
|
|
|
{
|
2014-10-31 01:41:13 +08:00
|
|
|
tu->phy.otg->state = OTG_STATE_A_IDLE;
|
2013-12-06 22:13:07 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static void tahvo_usb_become_peripheral(struct tahvo_usb *tu)
|
|
|
|
{
|
|
|
|
struct retu_dev *rdev = dev_get_drvdata(tu->pt_dev->dev.parent);
|
|
|
|
|
2017-01-16 20:37:01 +08:00
|
|
|
extcon_set_state_sync(tu->extcon, EXTCON_USB_HOST, false);
|
2013-12-06 22:13:07 +08:00
|
|
|
|
|
|
|
/* Power up transceiver and set it in USB peripheral mode */
|
|
|
|
retu_write(rdev, TAHVO_REG_USBR, USBR_SLAVE_CONTROL | USBR_REGOUT |
|
|
|
|
USBR_NSUSPEND | USBR_SLAVE_SW);
|
2014-10-31 01:41:13 +08:00
|
|
|
tu->phy.otg->state = OTG_STATE_B_IDLE;
|
2013-12-06 22:13:07 +08:00
|
|
|
|
|
|
|
check_vbus_state(tu);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void tahvo_usb_stop_peripheral(struct tahvo_usb *tu)
|
|
|
|
{
|
|
|
|
if (tu->phy.otg->gadget)
|
|
|
|
usb_gadget_vbus_disconnect(tu->phy.otg->gadget);
|
2014-10-31 01:41:13 +08:00
|
|
|
tu->phy.otg->state = OTG_STATE_B_IDLE;
|
2013-12-06 22:13:07 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static void tahvo_usb_power_off(struct tahvo_usb *tu)
|
|
|
|
{
|
|
|
|
struct retu_dev *rdev = dev_get_drvdata(tu->pt_dev->dev.parent);
|
|
|
|
|
|
|
|
/* Disable gadget controller if any */
|
|
|
|
if (tu->phy.otg->gadget)
|
|
|
|
usb_gadget_vbus_disconnect(tu->phy.otg->gadget);
|
|
|
|
|
|
|
|
/* Power off transceiver */
|
|
|
|
retu_write(rdev, TAHVO_REG_USBR, 0);
|
2014-10-31 01:41:13 +08:00
|
|
|
tu->phy.otg->state = OTG_STATE_UNDEFINED;
|
2013-12-06 22:13:07 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static int tahvo_usb_set_suspend(struct usb_phy *dev, int suspend)
|
|
|
|
{
|
|
|
|
struct tahvo_usb *tu = container_of(dev, struct tahvo_usb, phy);
|
|
|
|
struct retu_dev *rdev = dev_get_drvdata(tu->pt_dev->dev.parent);
|
|
|
|
u16 w;
|
|
|
|
|
|
|
|
dev_dbg(&tu->pt_dev->dev, "%s\n", __func__);
|
|
|
|
|
|
|
|
w = retu_read(rdev, TAHVO_REG_USBR);
|
|
|
|
if (suspend)
|
|
|
|
w &= ~USBR_NSUSPEND;
|
|
|
|
else
|
|
|
|
w |= USBR_NSUSPEND;
|
|
|
|
retu_write(rdev, TAHVO_REG_USBR, w);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int tahvo_usb_set_host(struct usb_otg *otg, struct usb_bus *host)
|
|
|
|
{
|
2014-10-31 01:41:14 +08:00
|
|
|
struct tahvo_usb *tu = container_of(otg->usb_phy, struct tahvo_usb,
|
|
|
|
phy);
|
2013-12-06 22:13:07 +08:00
|
|
|
|
|
|
|
dev_dbg(&tu->pt_dev->dev, "%s %p\n", __func__, host);
|
|
|
|
|
|
|
|
mutex_lock(&tu->serialize);
|
|
|
|
|
|
|
|
if (host == NULL) {
|
|
|
|
if (tu->tahvo_mode == TAHVO_MODE_HOST)
|
|
|
|
tahvo_usb_power_off(tu);
|
|
|
|
otg->host = NULL;
|
|
|
|
mutex_unlock(&tu->serialize);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (tu->tahvo_mode == TAHVO_MODE_HOST) {
|
|
|
|
otg->host = NULL;
|
|
|
|
tahvo_usb_become_host(tu);
|
|
|
|
}
|
|
|
|
|
|
|
|
otg->host = host;
|
|
|
|
|
|
|
|
mutex_unlock(&tu->serialize);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int tahvo_usb_set_peripheral(struct usb_otg *otg,
|
|
|
|
struct usb_gadget *gadget)
|
|
|
|
{
|
2014-10-31 01:41:14 +08:00
|
|
|
struct tahvo_usb *tu = container_of(otg->usb_phy, struct tahvo_usb,
|
|
|
|
phy);
|
2013-12-06 22:13:07 +08:00
|
|
|
|
|
|
|
dev_dbg(&tu->pt_dev->dev, "%s %p\n", __func__, gadget);
|
|
|
|
|
|
|
|
mutex_lock(&tu->serialize);
|
|
|
|
|
|
|
|
if (!gadget) {
|
|
|
|
if (tu->tahvo_mode == TAHVO_MODE_PERIPHERAL)
|
|
|
|
tahvo_usb_power_off(tu);
|
|
|
|
tu->phy.otg->gadget = NULL;
|
|
|
|
mutex_unlock(&tu->serialize);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
tu->phy.otg->gadget = gadget;
|
|
|
|
if (tu->tahvo_mode == TAHVO_MODE_PERIPHERAL)
|
|
|
|
tahvo_usb_become_peripheral(tu);
|
|
|
|
|
|
|
|
mutex_unlock(&tu->serialize);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static irqreturn_t tahvo_usb_vbus_interrupt(int irq, void *_tu)
|
|
|
|
{
|
|
|
|
struct tahvo_usb *tu = _tu;
|
|
|
|
|
|
|
|
mutex_lock(&tu->serialize);
|
|
|
|
check_vbus_state(tu);
|
|
|
|
mutex_unlock(&tu->serialize);
|
|
|
|
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t otg_mode_show(struct device *device,
|
|
|
|
struct device_attribute *attr, char *buf)
|
|
|
|
{
|
|
|
|
struct tahvo_usb *tu = dev_get_drvdata(device);
|
|
|
|
|
|
|
|
switch (tu->tahvo_mode) {
|
|
|
|
case TAHVO_MODE_HOST:
|
|
|
|
return sprintf(buf, "host\n");
|
|
|
|
case TAHVO_MODE_PERIPHERAL:
|
|
|
|
return sprintf(buf, "peripheral\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t otg_mode_store(struct device *device,
|
|
|
|
struct device_attribute *attr,
|
|
|
|
const char *buf, size_t count)
|
|
|
|
{
|
|
|
|
struct tahvo_usb *tu = dev_get_drvdata(device);
|
|
|
|
int r;
|
|
|
|
|
|
|
|
mutex_lock(&tu->serialize);
|
|
|
|
if (count >= 4 && strncmp(buf, "host", 4) == 0) {
|
|
|
|
if (tu->tahvo_mode == TAHVO_MODE_PERIPHERAL)
|
|
|
|
tahvo_usb_stop_peripheral(tu);
|
|
|
|
tu->tahvo_mode = TAHVO_MODE_HOST;
|
|
|
|
if (tu->phy.otg->host) {
|
|
|
|
dev_info(device, "HOST mode: host controller present\n");
|
|
|
|
tahvo_usb_become_host(tu);
|
|
|
|
} else {
|
|
|
|
dev_info(device, "HOST mode: no host controller, powering off\n");
|
|
|
|
tahvo_usb_power_off(tu);
|
|
|
|
}
|
|
|
|
r = strlen(buf);
|
|
|
|
} else if (count >= 10 && strncmp(buf, "peripheral", 10) == 0) {
|
|
|
|
if (tu->tahvo_mode == TAHVO_MODE_HOST)
|
|
|
|
tahvo_usb_stop_host(tu);
|
|
|
|
tu->tahvo_mode = TAHVO_MODE_PERIPHERAL;
|
|
|
|
if (tu->phy.otg->gadget) {
|
|
|
|
dev_info(device, "PERIPHERAL mode: gadget driver present\n");
|
|
|
|
tahvo_usb_become_peripheral(tu);
|
|
|
|
} else {
|
|
|
|
dev_info(device, "PERIPHERAL mode: no gadget driver, powering off\n");
|
|
|
|
tahvo_usb_power_off(tu);
|
|
|
|
}
|
|
|
|
r = strlen(buf);
|
|
|
|
} else {
|
|
|
|
r = -EINVAL;
|
|
|
|
}
|
|
|
|
mutex_unlock(&tu->serialize);
|
|
|
|
|
|
|
|
return r;
|
|
|
|
}
|
2018-01-23 18:24:05 +08:00
|
|
|
static DEVICE_ATTR_RW(otg_mode);
|
2013-12-06 22:13:07 +08:00
|
|
|
|
|
|
|
static struct attribute *tahvo_attributes[] = {
|
|
|
|
&dev_attr_vbus.attr,
|
|
|
|
&dev_attr_otg_mode.attr,
|
|
|
|
NULL
|
|
|
|
};
|
|
|
|
|
2017-08-04 20:06:44 +08:00
|
|
|
static const struct attribute_group tahvo_attr_group = {
|
2013-12-06 22:13:07 +08:00
|
|
|
.attrs = tahvo_attributes,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int tahvo_usb_probe(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct retu_dev *rdev = dev_get_drvdata(pdev->dev.parent);
|
|
|
|
struct tahvo_usb *tu;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
tu = devm_kzalloc(&pdev->dev, sizeof(*tu), GFP_KERNEL);
|
|
|
|
if (!tu)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
tu->phy.otg = devm_kzalloc(&pdev->dev, sizeof(*tu->phy.otg),
|
|
|
|
GFP_KERNEL);
|
|
|
|
if (!tu->phy.otg)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
tu->pt_dev = pdev;
|
|
|
|
|
|
|
|
/* Default mode */
|
|
|
|
#ifdef CONFIG_TAHVO_USB_HOST_BY_DEFAULT
|
|
|
|
tu->tahvo_mode = TAHVO_MODE_HOST;
|
|
|
|
#else
|
|
|
|
tu->tahvo_mode = TAHVO_MODE_PERIPHERAL;
|
|
|
|
#endif
|
|
|
|
|
|
|
|
mutex_init(&tu->serialize);
|
|
|
|
|
|
|
|
tu->ick = devm_clk_get(&pdev->dev, "usb_l4_ick");
|
|
|
|
if (!IS_ERR(tu->ick))
|
|
|
|
clk_enable(tu->ick);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Set initial state, so that we generate kevents only on state changes.
|
|
|
|
*/
|
|
|
|
tu->vbus_state = retu_read(rdev, TAHVO_REG_IDSR) & TAHVO_STAT_VBUS;
|
|
|
|
|
2015-07-01 12:11:32 +08:00
|
|
|
tu->extcon = devm_extcon_dev_allocate(&pdev->dev, tahvo_cable);
|
|
|
|
if (IS_ERR(tu->extcon)) {
|
|
|
|
dev_err(&pdev->dev, "failed to allocate memory for extcon\n");
|
2017-10-21 06:02:07 +08:00
|
|
|
ret = PTR_ERR(tu->extcon);
|
|
|
|
goto err_disable_clk;
|
2015-07-01 12:11:32 +08:00
|
|
|
}
|
2013-12-06 22:13:07 +08:00
|
|
|
|
2015-07-01 12:11:32 +08:00
|
|
|
ret = devm_extcon_dev_register(&pdev->dev, tu->extcon);
|
2013-12-06 22:13:07 +08:00
|
|
|
if (ret) {
|
|
|
|
dev_err(&pdev->dev, "could not register extcon device: %d\n",
|
|
|
|
ret);
|
|
|
|
goto err_disable_clk;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Set the initial cable state. */
|
2017-01-16 20:37:01 +08:00
|
|
|
extcon_set_state_sync(tu->extcon, EXTCON_USB_HOST,
|
2013-12-06 22:13:07 +08:00
|
|
|
tu->tahvo_mode == TAHVO_MODE_HOST);
|
2017-01-16 20:37:01 +08:00
|
|
|
extcon_set_state_sync(tu->extcon, EXTCON_USB, tu->vbus_state);
|
2013-12-06 22:13:07 +08:00
|
|
|
|
|
|
|
/* Create OTG interface */
|
|
|
|
tahvo_usb_power_off(tu);
|
|
|
|
tu->phy.dev = &pdev->dev;
|
2014-10-31 01:41:13 +08:00
|
|
|
tu->phy.otg->state = OTG_STATE_UNDEFINED;
|
2013-12-06 22:13:07 +08:00
|
|
|
tu->phy.label = DRIVER_NAME;
|
|
|
|
tu->phy.set_suspend = tahvo_usb_set_suspend;
|
|
|
|
|
2014-10-31 01:41:14 +08:00
|
|
|
tu->phy.otg->usb_phy = &tu->phy;
|
2013-12-06 22:13:07 +08:00
|
|
|
tu->phy.otg->set_host = tahvo_usb_set_host;
|
|
|
|
tu->phy.otg->set_peripheral = tahvo_usb_set_peripheral;
|
|
|
|
|
|
|
|
ret = usb_add_phy(&tu->phy, USB_PHY_TYPE_USB2);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(&pdev->dev, "cannot register USB transceiver: %d\n",
|
|
|
|
ret);
|
2015-07-01 12:11:32 +08:00
|
|
|
goto err_disable_clk;
|
2013-12-06 22:13:07 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
dev_set_drvdata(&pdev->dev, tu);
|
|
|
|
|
|
|
|
tu->irq = platform_get_irq(pdev, 0);
|
2015-05-23 10:28:16 +08:00
|
|
|
ret = request_threaded_irq(tu->irq, NULL, tahvo_usb_vbus_interrupt,
|
|
|
|
IRQF_ONESHOT,
|
2013-12-06 22:13:07 +08:00
|
|
|
"tahvo-vbus", tu);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(&pdev->dev, "could not register tahvo-vbus irq: %d\n",
|
|
|
|
ret);
|
|
|
|
goto err_remove_phy;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Attributes */
|
|
|
|
ret = sysfs_create_group(&pdev->dev.kobj, &tahvo_attr_group);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(&pdev->dev, "cannot create sysfs group: %d\n", ret);
|
|
|
|
goto err_free_irq;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
err_free_irq:
|
|
|
|
free_irq(tu->irq, tu);
|
|
|
|
err_remove_phy:
|
|
|
|
usb_remove_phy(&tu->phy);
|
|
|
|
err_disable_clk:
|
|
|
|
if (!IS_ERR(tu->ick))
|
|
|
|
clk_disable(tu->ick);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int tahvo_usb_remove(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct tahvo_usb *tu = platform_get_drvdata(pdev);
|
|
|
|
|
|
|
|
sysfs_remove_group(&pdev->dev.kobj, &tahvo_attr_group);
|
|
|
|
free_irq(tu->irq, tu);
|
|
|
|
usb_remove_phy(&tu->phy);
|
|
|
|
if (!IS_ERR(tu->ick))
|
|
|
|
clk_disable(tu->ick);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct platform_driver tahvo_usb_driver = {
|
|
|
|
.probe = tahvo_usb_probe,
|
|
|
|
.remove = tahvo_usb_remove,
|
|
|
|
.driver = {
|
|
|
|
.name = "tahvo-usb",
|
|
|
|
},
|
|
|
|
};
|
|
|
|
module_platform_driver(tahvo_usb_driver);
|
|
|
|
|
|
|
|
MODULE_DESCRIPTION("Tahvo USB transceiver driver");
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
MODULE_AUTHOR("Juha Yrjölä, Tony Lindgren, and Timo Teräs");
|
|
|
|
MODULE_AUTHOR("Aaro Koskinen <aaro.koskinen@iki.fi>");
|