OpenCloudOS-Kernel/include/linux/proc_fs.h

218 lines
8.0 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
/* SPDX-License-Identifier: GPL-2.0 */
/*
* The proc filesystem constants/structures
*/
#ifndef _LINUX_PROC_FS_H
#define _LINUX_PROC_FS_H
proc: faster open/read/close with "permanent" files Now that "struct proc_ops" exist we can start putting there stuff which could not fly with VFS "struct file_operations"... Most of fs/proc/inode.c file is dedicated to make open/read/.../close reliable in the event of disappearing /proc entries which usually happens if module is getting removed. Files like /proc/cpuinfo which never disappear simply do not need such protection. Save 2 atomic ops, 1 allocation, 1 free per open/read/close sequence for such "permanent" files. Enable "permanent" flag for /proc/cpuinfo /proc/kmsg /proc/modules /proc/slabinfo /proc/stat /proc/sysvipc/* /proc/swaps More will come once I figure out foolproof way to prevent out module authors from marking their stuff "permanent" for performance reasons when it is not. This should help with scalability: benchmark is "read /proc/cpuinfo R times by N threads scattered over the system". N R t, s (before) t, s (after) ----------------------------------------------------- 64 4096 1.582458 1.530502 -3.2% 256 4096 6.371926 6.125168 -3.9% 1024 4096 25.64888 24.47528 -4.6% Benchmark source: #include <chrono> #include <iostream> #include <thread> #include <vector> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> const int NR_CPUS = sysconf(_SC_NPROCESSORS_ONLN); int N; const char *filename; int R; int xxx = 0; int glue(int n) { cpu_set_t m; CPU_ZERO(&m); CPU_SET(n, &m); return sched_setaffinity(0, sizeof(cpu_set_t), &m); } void f(int n) { glue(n % NR_CPUS); while (*(volatile int *)&xxx == 0) { } for (int i = 0; i < R; i++) { int fd = open(filename, O_RDONLY); char buf[4096]; ssize_t rv = read(fd, buf, sizeof(buf)); asm volatile ("" :: "g" (rv)); close(fd); } } int main(int argc, char *argv[]) { if (argc < 4) { std::cerr << "usage: " << argv[0] << ' ' << "N /proc/filename R "; return 1; } N = atoi(argv[1]); filename = argv[2]; R = atoi(argv[3]); for (int i = 0; i < NR_CPUS; i++) { if (glue(i) == 0) break; } std::vector<std::thread> T; T.reserve(N); for (int i = 0; i < N; i++) { T.emplace_back(f, i); } auto t0 = std::chrono::system_clock::now(); { *(volatile int *)&xxx = 1; for (auto& t: T) { t.join(); } } auto t1 = std::chrono::system_clock::now(); std::chrono::duration<double> dt = t1 - t0; std::cout << dt.count() << ' '; return 0; } P.S.: Explicit randomization marker is added because adding non-function pointer will silently disable structure layout randomization. [akpm@linux-foundation.org: coding style fixes] Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Joe Perches <joe@perches.com> Link: http://lkml.kernel.org/r/20200222201539.GA22576@avx2 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 11:09:01 +08:00
#include <linux/compiler.h>
#include <linux/types.h>
#include <linux/fs.h>
struct proc_dir_entry;
struct seq_file;
struct seq_operations;
proc: faster open/read/close with "permanent" files Now that "struct proc_ops" exist we can start putting there stuff which could not fly with VFS "struct file_operations"... Most of fs/proc/inode.c file is dedicated to make open/read/.../close reliable in the event of disappearing /proc entries which usually happens if module is getting removed. Files like /proc/cpuinfo which never disappear simply do not need such protection. Save 2 atomic ops, 1 allocation, 1 free per open/read/close sequence for such "permanent" files. Enable "permanent" flag for /proc/cpuinfo /proc/kmsg /proc/modules /proc/slabinfo /proc/stat /proc/sysvipc/* /proc/swaps More will come once I figure out foolproof way to prevent out module authors from marking their stuff "permanent" for performance reasons when it is not. This should help with scalability: benchmark is "read /proc/cpuinfo R times by N threads scattered over the system". N R t, s (before) t, s (after) ----------------------------------------------------- 64 4096 1.582458 1.530502 -3.2% 256 4096 6.371926 6.125168 -3.9% 1024 4096 25.64888 24.47528 -4.6% Benchmark source: #include <chrono> #include <iostream> #include <thread> #include <vector> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> const int NR_CPUS = sysconf(_SC_NPROCESSORS_ONLN); int N; const char *filename; int R; int xxx = 0; int glue(int n) { cpu_set_t m; CPU_ZERO(&m); CPU_SET(n, &m); return sched_setaffinity(0, sizeof(cpu_set_t), &m); } void f(int n) { glue(n % NR_CPUS); while (*(volatile int *)&xxx == 0) { } for (int i = 0; i < R; i++) { int fd = open(filename, O_RDONLY); char buf[4096]; ssize_t rv = read(fd, buf, sizeof(buf)); asm volatile ("" :: "g" (rv)); close(fd); } } int main(int argc, char *argv[]) { if (argc < 4) { std::cerr << "usage: " << argv[0] << ' ' << "N /proc/filename R "; return 1; } N = atoi(argv[1]); filename = argv[2]; R = atoi(argv[3]); for (int i = 0; i < NR_CPUS; i++) { if (glue(i) == 0) break; } std::vector<std::thread> T; T.reserve(N); for (int i = 0; i < N; i++) { T.emplace_back(f, i); } auto t0 = std::chrono::system_clock::now(); { *(volatile int *)&xxx = 1; for (auto& t: T) { t.join(); } } auto t1 = std::chrono::system_clock::now(); std::chrono::duration<double> dt = t1 - t0; std::cout << dt.count() << ' '; return 0; } P.S.: Explicit randomization marker is added because adding non-function pointer will silently disable structure layout randomization. [akpm@linux-foundation.org: coding style fixes] Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Joe Perches <joe@perches.com> Link: http://lkml.kernel.org/r/20200222201539.GA22576@avx2 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 11:09:01 +08:00
enum {
/*
* All /proc entries using this ->proc_ops instance are never removed.
*
* If in doubt, ignore this flag.
*/
#ifdef MODULE
PROC_ENTRY_PERMANENT = 0U,
#else
PROC_ENTRY_PERMANENT = 1U << 0,
#endif
};
struct proc_ops {
proc: faster open/read/close with "permanent" files Now that "struct proc_ops" exist we can start putting there stuff which could not fly with VFS "struct file_operations"... Most of fs/proc/inode.c file is dedicated to make open/read/.../close reliable in the event of disappearing /proc entries which usually happens if module is getting removed. Files like /proc/cpuinfo which never disappear simply do not need such protection. Save 2 atomic ops, 1 allocation, 1 free per open/read/close sequence for such "permanent" files. Enable "permanent" flag for /proc/cpuinfo /proc/kmsg /proc/modules /proc/slabinfo /proc/stat /proc/sysvipc/* /proc/swaps More will come once I figure out foolproof way to prevent out module authors from marking their stuff "permanent" for performance reasons when it is not. This should help with scalability: benchmark is "read /proc/cpuinfo R times by N threads scattered over the system". N R t, s (before) t, s (after) ----------------------------------------------------- 64 4096 1.582458 1.530502 -3.2% 256 4096 6.371926 6.125168 -3.9% 1024 4096 25.64888 24.47528 -4.6% Benchmark source: #include <chrono> #include <iostream> #include <thread> #include <vector> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> const int NR_CPUS = sysconf(_SC_NPROCESSORS_ONLN); int N; const char *filename; int R; int xxx = 0; int glue(int n) { cpu_set_t m; CPU_ZERO(&m); CPU_SET(n, &m); return sched_setaffinity(0, sizeof(cpu_set_t), &m); } void f(int n) { glue(n % NR_CPUS); while (*(volatile int *)&xxx == 0) { } for (int i = 0; i < R; i++) { int fd = open(filename, O_RDONLY); char buf[4096]; ssize_t rv = read(fd, buf, sizeof(buf)); asm volatile ("" :: "g" (rv)); close(fd); } } int main(int argc, char *argv[]) { if (argc < 4) { std::cerr << "usage: " << argv[0] << ' ' << "N /proc/filename R "; return 1; } N = atoi(argv[1]); filename = argv[2]; R = atoi(argv[3]); for (int i = 0; i < NR_CPUS; i++) { if (glue(i) == 0) break; } std::vector<std::thread> T; T.reserve(N); for (int i = 0; i < N; i++) { T.emplace_back(f, i); } auto t0 = std::chrono::system_clock::now(); { *(volatile int *)&xxx = 1; for (auto& t: T) { t.join(); } } auto t1 = std::chrono::system_clock::now(); std::chrono::duration<double> dt = t1 - t0; std::cout << dt.count() << ' '; return 0; } P.S.: Explicit randomization marker is added because adding non-function pointer will silently disable structure layout randomization. [akpm@linux-foundation.org: coding style fixes] Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Joe Perches <joe@perches.com> Link: http://lkml.kernel.org/r/20200222201539.GA22576@avx2 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 11:09:01 +08:00
unsigned int proc_flags;
int (*proc_open)(struct inode *, struct file *);
ssize_t (*proc_read)(struct file *, char __user *, size_t, loff_t *);
ssize_t (*proc_read_iter)(struct kiocb *, struct iov_iter *);
ssize_t (*proc_write)(struct file *, const char __user *, size_t, loff_t *);
loff_t (*proc_lseek)(struct file *, loff_t, int);
int (*proc_release)(struct inode *, struct file *);
__poll_t (*proc_poll)(struct file *, struct poll_table_struct *);
long (*proc_ioctl)(struct file *, unsigned int, unsigned long);
#ifdef CONFIG_COMPAT
long (*proc_compat_ioctl)(struct file *, unsigned int, unsigned long);
#endif
int (*proc_mmap)(struct file *, struct vm_area_struct *);
unsigned long (*proc_get_unmapped_area)(struct file *, unsigned long, unsigned long, unsigned long, unsigned long);
proc: faster open/read/close with "permanent" files Now that "struct proc_ops" exist we can start putting there stuff which could not fly with VFS "struct file_operations"... Most of fs/proc/inode.c file is dedicated to make open/read/.../close reliable in the event of disappearing /proc entries which usually happens if module is getting removed. Files like /proc/cpuinfo which never disappear simply do not need such protection. Save 2 atomic ops, 1 allocation, 1 free per open/read/close sequence for such "permanent" files. Enable "permanent" flag for /proc/cpuinfo /proc/kmsg /proc/modules /proc/slabinfo /proc/stat /proc/sysvipc/* /proc/swaps More will come once I figure out foolproof way to prevent out module authors from marking their stuff "permanent" for performance reasons when it is not. This should help with scalability: benchmark is "read /proc/cpuinfo R times by N threads scattered over the system". N R t, s (before) t, s (after) ----------------------------------------------------- 64 4096 1.582458 1.530502 -3.2% 256 4096 6.371926 6.125168 -3.9% 1024 4096 25.64888 24.47528 -4.6% Benchmark source: #include <chrono> #include <iostream> #include <thread> #include <vector> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> const int NR_CPUS = sysconf(_SC_NPROCESSORS_ONLN); int N; const char *filename; int R; int xxx = 0; int glue(int n) { cpu_set_t m; CPU_ZERO(&m); CPU_SET(n, &m); return sched_setaffinity(0, sizeof(cpu_set_t), &m); } void f(int n) { glue(n % NR_CPUS); while (*(volatile int *)&xxx == 0) { } for (int i = 0; i < R; i++) { int fd = open(filename, O_RDONLY); char buf[4096]; ssize_t rv = read(fd, buf, sizeof(buf)); asm volatile ("" :: "g" (rv)); close(fd); } } int main(int argc, char *argv[]) { if (argc < 4) { std::cerr << "usage: " << argv[0] << ' ' << "N /proc/filename R "; return 1; } N = atoi(argv[1]); filename = argv[2]; R = atoi(argv[3]); for (int i = 0; i < NR_CPUS; i++) { if (glue(i) == 0) break; } std::vector<std::thread> T; T.reserve(N); for (int i = 0; i < N; i++) { T.emplace_back(f, i); } auto t0 = std::chrono::system_clock::now(); { *(volatile int *)&xxx = 1; for (auto& t: T) { t.join(); } } auto t1 = std::chrono::system_clock::now(); std::chrono::duration<double> dt = t1 - t0; std::cout << dt.count() << ' '; return 0; } P.S.: Explicit randomization marker is added because adding non-function pointer will silently disable structure layout randomization. [akpm@linux-foundation.org: coding style fixes] Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Joe Perches <joe@perches.com> Link: http://lkml.kernel.org/r/20200222201539.GA22576@avx2 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 11:09:01 +08:00
} __randomize_layout;
proc: allow to mount many instances of proc in one pid namespace This patch allows to have multiple procfs instances inside the same pid namespace. The aim here is lightweight sandboxes, and to allow that we have to modernize procfs internals. 1) The main aim of this work is to have on embedded systems one supervisor for apps. Right now we have some lightweight sandbox support, however if we create pid namespacess we have to manages all the processes inside too, where our goal is to be able to run a bunch of apps each one inside its own mount namespace without being able to notice each other. We only want to use mount namespaces, and we want procfs to behave more like a real mount point. 2) Linux Security Modules have multiple ptrace paths inside some subsystems, however inside procfs, the implementation does not guarantee that the ptrace() check which triggers the security_ptrace_check() hook will always run. We have the 'hidepid' mount option that can be used to force the ptrace_may_access() check inside has_pid_permissions() to run. The problem is that 'hidepid' is per pid namespace and not attached to the mount point, any remount or modification of 'hidepid' will propagate to all other procfs mounts. This also does not allow to support Yama LSM easily in desktop and user sessions. Yama ptrace scope which restricts ptrace and some other syscalls to be allowed only on inferiors, can be updated to have a per-task context, where the context will be inherited during fork(), clone() and preserved across execve(). If we support multiple private procfs instances, then we may force the ptrace_may_access() on /proc/<pids>/ to always run inside that new procfs instances. This will allow to specifiy on user sessions if we should populate procfs with pids that the user can ptrace or not. By using Yama ptrace scope, some restricted users will only be able to see inferiors inside /proc, they won't even be able to see their other processes. Some software like Chromium, Firefox's crash handler, Wine and others are already using Yama to restrict which processes can be ptracable. With this change this will give the possibility to restrict /proc/<pids>/ but more importantly this will give desktop users a generic and usuable way to specifiy which users should see all processes and which users can not. Side notes: * This covers the lack of seccomp where it is not able to parse arguments, it is easy to install a seccomp filter on direct syscalls that operate on pids, however /proc/<pid>/ is a Linux ABI using filesystem syscalls. With this change LSMs should be able to analyze open/read/write/close... In the new patch set version I removed the 'newinstance' option as suggested by Eric W. Biederman. Selftest has been added to verify new behavior. Signed-off-by: Alexey Gladkov <gladkov.alexey@gmail.com> Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2020-04-19 22:10:52 +08:00
/* definitions for hide_pid field */
enum proc_hidepid {
proc: allow to mount many instances of proc in one pid namespace This patch allows to have multiple procfs instances inside the same pid namespace. The aim here is lightweight sandboxes, and to allow that we have to modernize procfs internals. 1) The main aim of this work is to have on embedded systems one supervisor for apps. Right now we have some lightweight sandbox support, however if we create pid namespacess we have to manages all the processes inside too, where our goal is to be able to run a bunch of apps each one inside its own mount namespace without being able to notice each other. We only want to use mount namespaces, and we want procfs to behave more like a real mount point. 2) Linux Security Modules have multiple ptrace paths inside some subsystems, however inside procfs, the implementation does not guarantee that the ptrace() check which triggers the security_ptrace_check() hook will always run. We have the 'hidepid' mount option that can be used to force the ptrace_may_access() check inside has_pid_permissions() to run. The problem is that 'hidepid' is per pid namespace and not attached to the mount point, any remount or modification of 'hidepid' will propagate to all other procfs mounts. This also does not allow to support Yama LSM easily in desktop and user sessions. Yama ptrace scope which restricts ptrace and some other syscalls to be allowed only on inferiors, can be updated to have a per-task context, where the context will be inherited during fork(), clone() and preserved across execve(). If we support multiple private procfs instances, then we may force the ptrace_may_access() on /proc/<pids>/ to always run inside that new procfs instances. This will allow to specifiy on user sessions if we should populate procfs with pids that the user can ptrace or not. By using Yama ptrace scope, some restricted users will only be able to see inferiors inside /proc, they won't even be able to see their other processes. Some software like Chromium, Firefox's crash handler, Wine and others are already using Yama to restrict which processes can be ptracable. With this change this will give the possibility to restrict /proc/<pids>/ but more importantly this will give desktop users a generic and usuable way to specifiy which users should see all processes and which users can not. Side notes: * This covers the lack of seccomp where it is not able to parse arguments, it is easy to install a seccomp filter on direct syscalls that operate on pids, however /proc/<pid>/ is a Linux ABI using filesystem syscalls. With this change LSMs should be able to analyze open/read/write/close... In the new patch set version I removed the 'newinstance' option as suggested by Eric W. Biederman. Selftest has been added to verify new behavior. Signed-off-by: Alexey Gladkov <gladkov.alexey@gmail.com> Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2020-04-19 22:10:52 +08:00
HIDEPID_OFF = 0,
HIDEPID_NO_ACCESS = 1,
HIDEPID_INVISIBLE = 2,
HIDEPID_NOT_PTRACEABLE = 4, /* Limit pids to only ptraceable pids */
proc: allow to mount many instances of proc in one pid namespace This patch allows to have multiple procfs instances inside the same pid namespace. The aim here is lightweight sandboxes, and to allow that we have to modernize procfs internals. 1) The main aim of this work is to have on embedded systems one supervisor for apps. Right now we have some lightweight sandbox support, however if we create pid namespacess we have to manages all the processes inside too, where our goal is to be able to run a bunch of apps each one inside its own mount namespace without being able to notice each other. We only want to use mount namespaces, and we want procfs to behave more like a real mount point. 2) Linux Security Modules have multiple ptrace paths inside some subsystems, however inside procfs, the implementation does not guarantee that the ptrace() check which triggers the security_ptrace_check() hook will always run. We have the 'hidepid' mount option that can be used to force the ptrace_may_access() check inside has_pid_permissions() to run. The problem is that 'hidepid' is per pid namespace and not attached to the mount point, any remount or modification of 'hidepid' will propagate to all other procfs mounts. This also does not allow to support Yama LSM easily in desktop and user sessions. Yama ptrace scope which restricts ptrace and some other syscalls to be allowed only on inferiors, can be updated to have a per-task context, where the context will be inherited during fork(), clone() and preserved across execve(). If we support multiple private procfs instances, then we may force the ptrace_may_access() on /proc/<pids>/ to always run inside that new procfs instances. This will allow to specifiy on user sessions if we should populate procfs with pids that the user can ptrace or not. By using Yama ptrace scope, some restricted users will only be able to see inferiors inside /proc, they won't even be able to see their other processes. Some software like Chromium, Firefox's crash handler, Wine and others are already using Yama to restrict which processes can be ptracable. With this change this will give the possibility to restrict /proc/<pids>/ but more importantly this will give desktop users a generic and usuable way to specifiy which users should see all processes and which users can not. Side notes: * This covers the lack of seccomp where it is not able to parse arguments, it is easy to install a seccomp filter on direct syscalls that operate on pids, however /proc/<pid>/ is a Linux ABI using filesystem syscalls. With this change LSMs should be able to analyze open/read/write/close... In the new patch set version I removed the 'newinstance' option as suggested by Eric W. Biederman. Selftest has been added to verify new behavior. Signed-off-by: Alexey Gladkov <gladkov.alexey@gmail.com> Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2020-04-19 22:10:52 +08:00
};
/* definitions for proc mount option pidonly */
enum proc_pidonly {
PROC_PIDONLY_OFF = 0,
PROC_PIDONLY_ON = 1,
};
proc: allow to mount many instances of proc in one pid namespace This patch allows to have multiple procfs instances inside the same pid namespace. The aim here is lightweight sandboxes, and to allow that we have to modernize procfs internals. 1) The main aim of this work is to have on embedded systems one supervisor for apps. Right now we have some lightweight sandbox support, however if we create pid namespacess we have to manages all the processes inside too, where our goal is to be able to run a bunch of apps each one inside its own mount namespace without being able to notice each other. We only want to use mount namespaces, and we want procfs to behave more like a real mount point. 2) Linux Security Modules have multiple ptrace paths inside some subsystems, however inside procfs, the implementation does not guarantee that the ptrace() check which triggers the security_ptrace_check() hook will always run. We have the 'hidepid' mount option that can be used to force the ptrace_may_access() check inside has_pid_permissions() to run. The problem is that 'hidepid' is per pid namespace and not attached to the mount point, any remount or modification of 'hidepid' will propagate to all other procfs mounts. This also does not allow to support Yama LSM easily in desktop and user sessions. Yama ptrace scope which restricts ptrace and some other syscalls to be allowed only on inferiors, can be updated to have a per-task context, where the context will be inherited during fork(), clone() and preserved across execve(). If we support multiple private procfs instances, then we may force the ptrace_may_access() on /proc/<pids>/ to always run inside that new procfs instances. This will allow to specifiy on user sessions if we should populate procfs with pids that the user can ptrace or not. By using Yama ptrace scope, some restricted users will only be able to see inferiors inside /proc, they won't even be able to see their other processes. Some software like Chromium, Firefox's crash handler, Wine and others are already using Yama to restrict which processes can be ptracable. With this change this will give the possibility to restrict /proc/<pids>/ but more importantly this will give desktop users a generic and usuable way to specifiy which users should see all processes and which users can not. Side notes: * This covers the lack of seccomp where it is not able to parse arguments, it is easy to install a seccomp filter on direct syscalls that operate on pids, however /proc/<pid>/ is a Linux ABI using filesystem syscalls. With this change LSMs should be able to analyze open/read/write/close... In the new patch set version I removed the 'newinstance' option as suggested by Eric W. Biederman. Selftest has been added to verify new behavior. Signed-off-by: Alexey Gladkov <gladkov.alexey@gmail.com> Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2020-04-19 22:10:52 +08:00
struct proc_fs_info {
struct pid_namespace *pid_ns;
struct dentry *proc_self; /* For /proc/self */
struct dentry *proc_thread_self; /* For /proc/thread-self */
kgid_t pid_gid;
enum proc_hidepid hide_pid;
enum proc_pidonly pidonly;
proc: allow to mount many instances of proc in one pid namespace This patch allows to have multiple procfs instances inside the same pid namespace. The aim here is lightweight sandboxes, and to allow that we have to modernize procfs internals. 1) The main aim of this work is to have on embedded systems one supervisor for apps. Right now we have some lightweight sandbox support, however if we create pid namespacess we have to manages all the processes inside too, where our goal is to be able to run a bunch of apps each one inside its own mount namespace without being able to notice each other. We only want to use mount namespaces, and we want procfs to behave more like a real mount point. 2) Linux Security Modules have multiple ptrace paths inside some subsystems, however inside procfs, the implementation does not guarantee that the ptrace() check which triggers the security_ptrace_check() hook will always run. We have the 'hidepid' mount option that can be used to force the ptrace_may_access() check inside has_pid_permissions() to run. The problem is that 'hidepid' is per pid namespace and not attached to the mount point, any remount or modification of 'hidepid' will propagate to all other procfs mounts. This also does not allow to support Yama LSM easily in desktop and user sessions. Yama ptrace scope which restricts ptrace and some other syscalls to be allowed only on inferiors, can be updated to have a per-task context, where the context will be inherited during fork(), clone() and preserved across execve(). If we support multiple private procfs instances, then we may force the ptrace_may_access() on /proc/<pids>/ to always run inside that new procfs instances. This will allow to specifiy on user sessions if we should populate procfs with pids that the user can ptrace or not. By using Yama ptrace scope, some restricted users will only be able to see inferiors inside /proc, they won't even be able to see their other processes. Some software like Chromium, Firefox's crash handler, Wine and others are already using Yama to restrict which processes can be ptracable. With this change this will give the possibility to restrict /proc/<pids>/ but more importantly this will give desktop users a generic and usuable way to specifiy which users should see all processes and which users can not. Side notes: * This covers the lack of seccomp where it is not able to parse arguments, it is easy to install a seccomp filter on direct syscalls that operate on pids, however /proc/<pid>/ is a Linux ABI using filesystem syscalls. With this change LSMs should be able to analyze open/read/write/close... In the new patch set version I removed the 'newinstance' option as suggested by Eric W. Biederman. Selftest has been added to verify new behavior. Signed-off-by: Alexey Gladkov <gladkov.alexey@gmail.com> Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2020-04-19 22:10:52 +08:00
};
static inline struct proc_fs_info *proc_sb_info(struct super_block *sb)
{
return sb->s_fs_info;
}
#ifdef CONFIG_PROC_FS
typedef int (*proc_write_t)(struct file *, char *, size_t);
extern void proc_root_init(void);
proc: Use a list of inodes to flush from proc Rework the flushing of proc to use a list of directory inodes that need to be flushed. The list is kept on struct pid not on struct task_struct, as there is a fixed connection between proc inodes and pids but at least for the case of de_thread the pid of a task_struct changes. This removes the dependency on proc_mnt which allows for different mounts of proc having different mount options even in the same pid namespace and this allows for the removal of proc_mnt which will trivially the first mount of proc to honor it's mount options. This flushing remains an optimization. The functions pid_delete_dentry and pid_revalidate ensure that ordinary dcache management will not attempt to use dentries past the point their respective task has died. When unused the shrinker will eventually be able to remove these dentries. There is a case in de_thread where proc_flush_pid can be called early for a given pid. Which winds up being safe (if suboptimal) as this is just an optiimization. Only pid directories are put on the list as the other per pid files are children of those directories and d_invalidate on the directory will get them as well. So that the pid can be used during flushing it's reference count is taken in release_task and dropped in proc_flush_pid. Further the call of proc_flush_pid is moved after the tasklist_lock is released in release_task so that it is certain that the pid has already been unhashed when flushing it taking place. This removes a small race where a dentry could recreated. As struct pid is supposed to be small and I need a per pid lock I reuse the only lock that currently exists in struct pid the the wait_pidfd.lock. The net result is that this adds all of this functionality with just a little extra list management overhead and a single extra pointer in struct pid. v2: Initialize pid->inodes. I somehow failed to get that initialization into the initial version of the patch. A boot failure was reported by "kernel test robot <lkp@intel.com>", and failure to initialize that pid->inodes matches all of the reported symptoms. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2020-02-20 08:22:26 +08:00
extern void proc_flush_pid(struct pid *);
extern struct proc_dir_entry *proc_symlink(const char *,
struct proc_dir_entry *, const char *);
extern struct proc_dir_entry *proc_mkdir(const char *, struct proc_dir_entry *);
extern struct proc_dir_entry *proc_mkdir_data(const char *, umode_t,
struct proc_dir_entry *, void *);
extern struct proc_dir_entry *proc_mkdir_mode(const char *, umode_t,
struct proc_dir_entry *);
struct proc_dir_entry *proc_create_mount_point(const char *name);
struct proc_dir_entry *proc_create_seq_private(const char *name, umode_t mode,
struct proc_dir_entry *parent, const struct seq_operations *ops,
unsigned int state_size, void *data);
#define proc_create_seq_data(name, mode, parent, ops, data) \
proc_create_seq_private(name, mode, parent, ops, 0, data)
#define proc_create_seq(name, mode, parent, ops) \
proc_create_seq_private(name, mode, parent, ops, 0, NULL)
struct proc_dir_entry *proc_create_single_data(const char *name, umode_t mode,
struct proc_dir_entry *parent,
int (*show)(struct seq_file *, void *), void *data);
#define proc_create_single(name, mode, parent, show) \
proc_create_single_data(name, mode, parent, show, NULL)
extern struct proc_dir_entry *proc_create_data(const char *, umode_t,
struct proc_dir_entry *,
const struct proc_ops *,
void *);
struct proc_dir_entry *proc_create(const char *name, umode_t mode, struct proc_dir_entry *parent, const struct proc_ops *proc_ops);
extern void proc_set_size(struct proc_dir_entry *, loff_t);
extern void proc_set_user(struct proc_dir_entry *, kuid_t, kgid_t);
extern void *PDE_DATA(const struct inode *);
extern void *proc_get_parent_data(const struct inode *);
extern void proc_remove(struct proc_dir_entry *);
extern void remove_proc_entry(const char *, struct proc_dir_entry *);
extern int remove_proc_subtree(const char *, struct proc_dir_entry *);
struct proc_dir_entry *proc_create_net_data(const char *name, umode_t mode,
struct proc_dir_entry *parent, const struct seq_operations *ops,
unsigned int state_size, void *data);
#define proc_create_net(name, mode, parent, ops, state_size) \
proc_create_net_data(name, mode, parent, ops, state_size, NULL)
struct proc_dir_entry *proc_create_net_single(const char *name, umode_t mode,
struct proc_dir_entry *parent,
int (*show)(struct seq_file *, void *), void *data);
struct proc_dir_entry *proc_create_net_data_write(const char *name, umode_t mode,
struct proc_dir_entry *parent,
const struct seq_operations *ops,
proc_write_t write,
unsigned int state_size, void *data);
struct proc_dir_entry *proc_create_net_single_write(const char *name, umode_t mode,
struct proc_dir_entry *parent,
int (*show)(struct seq_file *, void *),
proc_write_t write,
void *data);
signal: add pidfd_send_signal() syscall The kill() syscall operates on process identifiers (pid). After a process has exited its pid can be reused by another process. If a caller sends a signal to a reused pid it will end up signaling the wrong process. This issue has often surfaced and there has been a push to address this problem [1]. This patch uses file descriptors (fd) from proc/<pid> as stable handles on struct pid. Even if a pid is recycled the handle will not change. The fd can be used to send signals to the process it refers to. Thus, the new syscall pidfd_send_signal() is introduced to solve this problem. Instead of pids it operates on process fds (pidfd). /* prototype and argument /* long pidfd_send_signal(int pidfd, int sig, siginfo_t *info, unsigned int flags); /* syscall number 424 */ The syscall number was chosen to be 424 to align with Arnd's rework in his y2038 to minimize merge conflicts (cf. [25]). In addition to the pidfd and signal argument it takes an additional siginfo_t and flags argument. If the siginfo_t argument is NULL then pidfd_send_signal() is equivalent to kill(<positive-pid>, <signal>). If it is not NULL pidfd_send_signal() is equivalent to rt_sigqueueinfo(). The flags argument is added to allow for future extensions of this syscall. It currently needs to be passed as 0. Failing to do so will cause EINVAL. /* pidfd_send_signal() replaces multiple pid-based syscalls */ The pidfd_send_signal() syscall currently takes on the job of rt_sigqueueinfo(2) and parts of the functionality of kill(2), Namely, when a positive pid is passed to kill(2). It will however be possible to also replace tgkill(2) and rt_tgsigqueueinfo(2) if this syscall is extended. /* sending signals to threads (tid) and process groups (pgid) */ Specifically, the pidfd_send_signal() syscall does currently not operate on process groups or threads. This is left for future extensions. In order to extend the syscall to allow sending signal to threads and process groups appropriately named flags (e.g. PIDFD_TYPE_PGID, and PIDFD_TYPE_TID) should be added. This implies that the flags argument will determine what is signaled and not the file descriptor itself. Put in other words, grouping in this api is a property of the flags argument not a property of the file descriptor (cf. [13]). Clarification for this has been requested by Eric (cf. [19]). When appropriate extensions through the flags argument are added then pidfd_send_signal() can additionally replace the part of kill(2) which operates on process groups as well as the tgkill(2) and rt_tgsigqueueinfo(2) syscalls. How such an extension could be implemented has been very roughly sketched in [14], [15], and [16]. However, this should not be taken as a commitment to a particular implementation. There might be better ways to do it. Right now this is intentionally left out to keep this patchset as simple as possible (cf. [4]). /* naming */ The syscall had various names throughout iterations of this patchset: - procfd_signal() - procfd_send_signal() - taskfd_send_signal() In the last round of reviews it was pointed out that given that if the flags argument decides the scope of the signal instead of different types of fds it might make sense to either settle for "procfd_" or "pidfd_" as prefix. The community was willing to accept either (cf. [17] and [18]). Given that one developer expressed strong preference for the "pidfd_" prefix (cf. [13]) and with other developers less opinionated about the name we should settle for "pidfd_" to avoid further bikeshedding. The "_send_signal" suffix was chosen to reflect the fact that the syscall takes on the job of multiple syscalls. It is therefore intentional that the name is not reminiscent of neither kill(2) nor rt_sigqueueinfo(2). Not the fomer because it might imply that pidfd_send_signal() is a replacement for kill(2), and not the latter because it is a hassle to remember the correct spelling - especially for non-native speakers - and because it is not descriptive enough of what the syscall actually does. The name "pidfd_send_signal" makes it very clear that its job is to send signals. /* zombies */ Zombies can be signaled just as any other process. No special error will be reported since a zombie state is an unreliable state (cf. [3]). However, this can be added as an extension through the @flags argument if the need ever arises. /* cross-namespace signals */ The patch currently enforces that the signaler and signalee either are in the same pid namespace or that the signaler's pid namespace is an ancestor of the signalee's pid namespace. This is done for the sake of simplicity and because it is unclear to what values certain members of struct siginfo_t would need to be set to (cf. [5], [6]). /* compat syscalls */ It became clear that we would like to avoid adding compat syscalls (cf. [7]). The compat syscall handling is now done in kernel/signal.c itself by adding __copy_siginfo_from_user_generic() which lets us avoid compat syscalls (cf. [8]). It should be noted that the addition of __copy_siginfo_from_user_any() is caused by a bug in the original implementation of rt_sigqueueinfo(2) (cf. 12). With upcoming rework for syscall handling things might improve significantly (cf. [11]) and __copy_siginfo_from_user_any() will not gain any additional callers. /* testing */ This patch was tested on x64 and x86. /* userspace usage */ An asciinema recording for the basic functionality can be found under [9]. With this patch a process can be killed via: #define _GNU_SOURCE #include <errno.h> #include <fcntl.h> #include <signal.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/stat.h> #include <sys/syscall.h> #include <sys/types.h> #include <unistd.h> static inline int do_pidfd_send_signal(int pidfd, int sig, siginfo_t *info, unsigned int flags) { #ifdef __NR_pidfd_send_signal return syscall(__NR_pidfd_send_signal, pidfd, sig, info, flags); #else return -ENOSYS; #endif } int main(int argc, char *argv[]) { int fd, ret, saved_errno, sig; if (argc < 3) exit(EXIT_FAILURE); fd = open(argv[1], O_DIRECTORY | O_CLOEXEC); if (fd < 0) { printf("%s - Failed to open \"%s\"\n", strerror(errno), argv[1]); exit(EXIT_FAILURE); } sig = atoi(argv[2]); printf("Sending signal %d to process %s\n", sig, argv[1]); ret = do_pidfd_send_signal(fd, sig, NULL, 0); saved_errno = errno; close(fd); errno = saved_errno; if (ret < 0) { printf("%s - Failed to send signal %d to process %s\n", strerror(errno), sig, argv[1]); exit(EXIT_FAILURE); } exit(EXIT_SUCCESS); } /* Q&A * Given that it seems the same questions get asked again by people who are * late to the party it makes sense to add a Q&A section to the commit * message so it's hopefully easier to avoid duplicate threads. * * For the sake of progress please consider these arguments settled unless * there is a new point that desperately needs to be addressed. Please make * sure to check the links to the threads in this commit message whether * this has not already been covered. */ Q-01: (Florian Weimer [20], Andrew Morton [21]) What happens when the target process has exited? A-01: Sending the signal will fail with ESRCH (cf. [22]). Q-02: (Andrew Morton [21]) Is the task_struct pinned by the fd? A-02: No. A reference to struct pid is kept. struct pid - as far as I understand - was created exactly for the reason to not require to pin struct task_struct (cf. [22]). Q-03: (Andrew Morton [21]) Does the entire procfs directory remain visible? Just one entry within it? A-03: The same thing that happens right now when you hold a file descriptor to /proc/<pid> open (cf. [22]). Q-04: (Andrew Morton [21]) Does the pid remain reserved? A-04: No. This patchset guarantees a stable handle not that pids are not recycled (cf. [22]). Q-05: (Andrew Morton [21]) Do attempts to signal that fd return errors? A-05: See {Q,A}-01. Q-06: (Andrew Morton [22]) Is there a cleaner way of obtaining the fd? Another syscall perhaps. A-06: Userspace can already trivially retrieve file descriptors from procfs so this is something that we will need to support anyway. Hence, there's no immediate need to add another syscalls just to make pidfd_send_signal() not dependent on the presence of procfs. However, adding a syscalls to get such file descriptors is planned for a future patchset (cf. [22]). Q-07: (Andrew Morton [21] and others) This fd-for-a-process sounds like a handy thing and people may well think up other uses for it in the future, probably unrelated to signals. Are the code and the interface designed to permit such future applications? A-07: Yes (cf. [22]). Q-08: (Andrew Morton [21] and others) Now I think about it, why a new syscall? This thing is looking rather like an ioctl? A-08: This has been extensively discussed. It was agreed that a syscall is preferred for a variety or reasons. Here are just a few taken from prior threads. Syscalls are safer than ioctl()s especially when signaling to fds. Processes are a core kernel concept so a syscall seems more appropriate. The layout of the syscall with its four arguments would require the addition of a custom struct for the ioctl() thereby causing at least the same amount or even more complexity for userspace than a simple syscall. The new syscall will replace multiple other pid-based syscalls (see description above). The file-descriptors-for-processes concept introduced with this syscall will be extended with other syscalls in the future. See also [22], [23] and various other threads already linked in here. Q-09: (Florian Weimer [24]) What happens if you use the new interface with an O_PATH descriptor? A-09: pidfds opened as O_PATH fds cannot be used to send signals to a process (cf. [2]). Signaling processes through pidfds is the equivalent of writing to a file. Thus, this is not an operation that operates "purely at the file descriptor level" as required by the open(2) manpage. See also [4]. /* References */ [1]: https://lore.kernel.org/lkml/20181029221037.87724-1-dancol@google.com/ [2]: https://lore.kernel.org/lkml/874lbtjvtd.fsf@oldenburg2.str.redhat.com/ [3]: https://lore.kernel.org/lkml/20181204132604.aspfupwjgjx6fhva@brauner.io/ [4]: https://lore.kernel.org/lkml/20181203180224.fkvw4kajtbvru2ku@brauner.io/ [5]: https://lore.kernel.org/lkml/20181121213946.GA10795@mail.hallyn.com/ [6]: https://lore.kernel.org/lkml/20181120103111.etlqp7zop34v6nv4@brauner.io/ [7]: https://lore.kernel.org/lkml/36323361-90BD-41AF-AB5B-EE0D7BA02C21@amacapital.net/ [8]: https://lore.kernel.org/lkml/87tvjxp8pc.fsf@xmission.com/ [9]: https://asciinema.org/a/IQjuCHew6bnq1cr78yuMv16cy [11]: https://lore.kernel.org/lkml/F53D6D38-3521-4C20-9034-5AF447DF62FF@amacapital.net/ [12]: https://lore.kernel.org/lkml/87zhtjn8ck.fsf@xmission.com/ [13]: https://lore.kernel.org/lkml/871s6u9z6u.fsf@xmission.com/ [14]: https://lore.kernel.org/lkml/20181206231742.xxi4ghn24z4h2qki@brauner.io/ [15]: https://lore.kernel.org/lkml/20181207003124.GA11160@mail.hallyn.com/ [16]: https://lore.kernel.org/lkml/20181207015423.4miorx43l3qhppfz@brauner.io/ [17]: https://lore.kernel.org/lkml/CAGXu5jL8PciZAXvOvCeCU3wKUEB_dU-O3q0tDw4uB_ojMvDEew@mail.gmail.com/ [18]: https://lore.kernel.org/lkml/20181206222746.GB9224@mail.hallyn.com/ [19]: https://lore.kernel.org/lkml/20181208054059.19813-1-christian@brauner.io/ [20]: https://lore.kernel.org/lkml/8736rebl9s.fsf@oldenburg.str.redhat.com/ [21]: https://lore.kernel.org/lkml/20181228152012.dbf0508c2508138efc5f2bbe@linux-foundation.org/ [22]: https://lore.kernel.org/lkml/20181228233725.722tdfgijxcssg76@brauner.io/ [23]: https://lwn.net/Articles/773459/ [24]: https://lore.kernel.org/lkml/8736rebl9s.fsf@oldenburg.str.redhat.com/ [25]: https://lore.kernel.org/lkml/CAK8P3a0ej9NcJM8wXNPbcGUyOUZYX+VLoDFdbenW3s3114oQZw@mail.gmail.com/ Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Jann Horn <jannh@google.com> Cc: Andy Lutomirsky <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Florian Weimer <fweimer@redhat.com> Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Tycho Andersen <tycho@tycho.ws> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Serge Hallyn <serge@hallyn.com> Acked-by: Aleksa Sarai <cyphar@cyphar.com>
2018-11-19 07:51:56 +08:00
extern struct pid *tgid_pidfd_to_pid(const struct file *file);
struct bpf_iter_aux_info;
extern int bpf_iter_init_seq_net(void *priv_data, struct bpf_iter_aux_info *aux);
extern void bpf_iter_fini_seq_net(void *priv_data);
#ifdef CONFIG_PROC_PID_ARCH_STATUS
/*
* The architecture which selects CONFIG_PROC_PID_ARCH_STATUS must
* provide proc_pid_arch_status() definition.
*/
int proc_pid_arch_status(struct seq_file *m, struct pid_namespace *ns,
struct pid *pid, struct task_struct *task);
#endif /* CONFIG_PROC_PID_ARCH_STATUS */
#else /* CONFIG_PROC_FS */
static inline void proc_root_init(void)
{
}
proc: Use a list of inodes to flush from proc Rework the flushing of proc to use a list of directory inodes that need to be flushed. The list is kept on struct pid not on struct task_struct, as there is a fixed connection between proc inodes and pids but at least for the case of de_thread the pid of a task_struct changes. This removes the dependency on proc_mnt which allows for different mounts of proc having different mount options even in the same pid namespace and this allows for the removal of proc_mnt which will trivially the first mount of proc to honor it's mount options. This flushing remains an optimization. The functions pid_delete_dentry and pid_revalidate ensure that ordinary dcache management will not attempt to use dentries past the point their respective task has died. When unused the shrinker will eventually be able to remove these dentries. There is a case in de_thread where proc_flush_pid can be called early for a given pid. Which winds up being safe (if suboptimal) as this is just an optiimization. Only pid directories are put on the list as the other per pid files are children of those directories and d_invalidate on the directory will get them as well. So that the pid can be used during flushing it's reference count is taken in release_task and dropped in proc_flush_pid. Further the call of proc_flush_pid is moved after the tasklist_lock is released in release_task so that it is certain that the pid has already been unhashed when flushing it taking place. This removes a small race where a dentry could recreated. As struct pid is supposed to be small and I need a per pid lock I reuse the only lock that currently exists in struct pid the the wait_pidfd.lock. The net result is that this adds all of this functionality with just a little extra list management overhead and a single extra pointer in struct pid. v2: Initialize pid->inodes. I somehow failed to get that initialization into the initial version of the patch. A boot failure was reported by "kernel test robot <lkp@intel.com>", and failure to initialize that pid->inodes matches all of the reported symptoms. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2020-02-20 08:22:26 +08:00
static inline void proc_flush_pid(struct pid *pid)
{
}
static inline struct proc_dir_entry *proc_symlink(const char *name,
struct proc_dir_entry *parent,const char *dest) { return NULL;}
static inline struct proc_dir_entry *proc_mkdir(const char *name,
struct proc_dir_entry *parent) {return NULL;}
static inline struct proc_dir_entry *proc_create_mount_point(const char *name) { return NULL; }
static inline struct proc_dir_entry *proc_mkdir_data(const char *name,
umode_t mode, struct proc_dir_entry *parent, void *data) { return NULL; }
static inline struct proc_dir_entry *proc_mkdir_mode(const char *name,
umode_t mode, struct proc_dir_entry *parent) { return NULL; }
#define proc_create_seq_private(name, mode, parent, ops, size, data) ({NULL;})
#define proc_create_seq_data(name, mode, parent, ops, data) ({NULL;})
#define proc_create_seq(name, mode, parent, ops) ({NULL;})
#define proc_create_single(name, mode, parent, show) ({NULL;})
#define proc_create_single_data(name, mode, parent, show, data) ({NULL;})
#define proc_create(name, mode, parent, proc_ops) ({NULL;})
#define proc_create_data(name, mode, parent, proc_ops, data) ({NULL;})
static inline void proc_set_size(struct proc_dir_entry *de, loff_t size) {}
static inline void proc_set_user(struct proc_dir_entry *de, kuid_t uid, kgid_t gid) {}
static inline void *PDE_DATA(const struct inode *inode) {BUG(); return NULL;}
static inline void *proc_get_parent_data(const struct inode *inode) { BUG(); return NULL; }
static inline void proc_remove(struct proc_dir_entry *de) {}
#define remove_proc_entry(name, parent) do {} while (0)
static inline int remove_proc_subtree(const char *name, struct proc_dir_entry *parent) { return 0; }
#define proc_create_net_data(name, mode, parent, ops, state_size, data) ({NULL;})
#define proc_create_net(name, mode, parent, state_size, ops) ({NULL;})
#define proc_create_net_single(name, mode, parent, show, data) ({NULL;})
signal: add pidfd_send_signal() syscall The kill() syscall operates on process identifiers (pid). After a process has exited its pid can be reused by another process. If a caller sends a signal to a reused pid it will end up signaling the wrong process. This issue has often surfaced and there has been a push to address this problem [1]. This patch uses file descriptors (fd) from proc/<pid> as stable handles on struct pid. Even if a pid is recycled the handle will not change. The fd can be used to send signals to the process it refers to. Thus, the new syscall pidfd_send_signal() is introduced to solve this problem. Instead of pids it operates on process fds (pidfd). /* prototype and argument /* long pidfd_send_signal(int pidfd, int sig, siginfo_t *info, unsigned int flags); /* syscall number 424 */ The syscall number was chosen to be 424 to align with Arnd's rework in his y2038 to minimize merge conflicts (cf. [25]). In addition to the pidfd and signal argument it takes an additional siginfo_t and flags argument. If the siginfo_t argument is NULL then pidfd_send_signal() is equivalent to kill(<positive-pid>, <signal>). If it is not NULL pidfd_send_signal() is equivalent to rt_sigqueueinfo(). The flags argument is added to allow for future extensions of this syscall. It currently needs to be passed as 0. Failing to do so will cause EINVAL. /* pidfd_send_signal() replaces multiple pid-based syscalls */ The pidfd_send_signal() syscall currently takes on the job of rt_sigqueueinfo(2) and parts of the functionality of kill(2), Namely, when a positive pid is passed to kill(2). It will however be possible to also replace tgkill(2) and rt_tgsigqueueinfo(2) if this syscall is extended. /* sending signals to threads (tid) and process groups (pgid) */ Specifically, the pidfd_send_signal() syscall does currently not operate on process groups or threads. This is left for future extensions. In order to extend the syscall to allow sending signal to threads and process groups appropriately named flags (e.g. PIDFD_TYPE_PGID, and PIDFD_TYPE_TID) should be added. This implies that the flags argument will determine what is signaled and not the file descriptor itself. Put in other words, grouping in this api is a property of the flags argument not a property of the file descriptor (cf. [13]). Clarification for this has been requested by Eric (cf. [19]). When appropriate extensions through the flags argument are added then pidfd_send_signal() can additionally replace the part of kill(2) which operates on process groups as well as the tgkill(2) and rt_tgsigqueueinfo(2) syscalls. How such an extension could be implemented has been very roughly sketched in [14], [15], and [16]. However, this should not be taken as a commitment to a particular implementation. There might be better ways to do it. Right now this is intentionally left out to keep this patchset as simple as possible (cf. [4]). /* naming */ The syscall had various names throughout iterations of this patchset: - procfd_signal() - procfd_send_signal() - taskfd_send_signal() In the last round of reviews it was pointed out that given that if the flags argument decides the scope of the signal instead of different types of fds it might make sense to either settle for "procfd_" or "pidfd_" as prefix. The community was willing to accept either (cf. [17] and [18]). Given that one developer expressed strong preference for the "pidfd_" prefix (cf. [13]) and with other developers less opinionated about the name we should settle for "pidfd_" to avoid further bikeshedding. The "_send_signal" suffix was chosen to reflect the fact that the syscall takes on the job of multiple syscalls. It is therefore intentional that the name is not reminiscent of neither kill(2) nor rt_sigqueueinfo(2). Not the fomer because it might imply that pidfd_send_signal() is a replacement for kill(2), and not the latter because it is a hassle to remember the correct spelling - especially for non-native speakers - and because it is not descriptive enough of what the syscall actually does. The name "pidfd_send_signal" makes it very clear that its job is to send signals. /* zombies */ Zombies can be signaled just as any other process. No special error will be reported since a zombie state is an unreliable state (cf. [3]). However, this can be added as an extension through the @flags argument if the need ever arises. /* cross-namespace signals */ The patch currently enforces that the signaler and signalee either are in the same pid namespace or that the signaler's pid namespace is an ancestor of the signalee's pid namespace. This is done for the sake of simplicity and because it is unclear to what values certain members of struct siginfo_t would need to be set to (cf. [5], [6]). /* compat syscalls */ It became clear that we would like to avoid adding compat syscalls (cf. [7]). The compat syscall handling is now done in kernel/signal.c itself by adding __copy_siginfo_from_user_generic() which lets us avoid compat syscalls (cf. [8]). It should be noted that the addition of __copy_siginfo_from_user_any() is caused by a bug in the original implementation of rt_sigqueueinfo(2) (cf. 12). With upcoming rework for syscall handling things might improve significantly (cf. [11]) and __copy_siginfo_from_user_any() will not gain any additional callers. /* testing */ This patch was tested on x64 and x86. /* userspace usage */ An asciinema recording for the basic functionality can be found under [9]. With this patch a process can be killed via: #define _GNU_SOURCE #include <errno.h> #include <fcntl.h> #include <signal.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <sys/stat.h> #include <sys/syscall.h> #include <sys/types.h> #include <unistd.h> static inline int do_pidfd_send_signal(int pidfd, int sig, siginfo_t *info, unsigned int flags) { #ifdef __NR_pidfd_send_signal return syscall(__NR_pidfd_send_signal, pidfd, sig, info, flags); #else return -ENOSYS; #endif } int main(int argc, char *argv[]) { int fd, ret, saved_errno, sig; if (argc < 3) exit(EXIT_FAILURE); fd = open(argv[1], O_DIRECTORY | O_CLOEXEC); if (fd < 0) { printf("%s - Failed to open \"%s\"\n", strerror(errno), argv[1]); exit(EXIT_FAILURE); } sig = atoi(argv[2]); printf("Sending signal %d to process %s\n", sig, argv[1]); ret = do_pidfd_send_signal(fd, sig, NULL, 0); saved_errno = errno; close(fd); errno = saved_errno; if (ret < 0) { printf("%s - Failed to send signal %d to process %s\n", strerror(errno), sig, argv[1]); exit(EXIT_FAILURE); } exit(EXIT_SUCCESS); } /* Q&A * Given that it seems the same questions get asked again by people who are * late to the party it makes sense to add a Q&A section to the commit * message so it's hopefully easier to avoid duplicate threads. * * For the sake of progress please consider these arguments settled unless * there is a new point that desperately needs to be addressed. Please make * sure to check the links to the threads in this commit message whether * this has not already been covered. */ Q-01: (Florian Weimer [20], Andrew Morton [21]) What happens when the target process has exited? A-01: Sending the signal will fail with ESRCH (cf. [22]). Q-02: (Andrew Morton [21]) Is the task_struct pinned by the fd? A-02: No. A reference to struct pid is kept. struct pid - as far as I understand - was created exactly for the reason to not require to pin struct task_struct (cf. [22]). Q-03: (Andrew Morton [21]) Does the entire procfs directory remain visible? Just one entry within it? A-03: The same thing that happens right now when you hold a file descriptor to /proc/<pid> open (cf. [22]). Q-04: (Andrew Morton [21]) Does the pid remain reserved? A-04: No. This patchset guarantees a stable handle not that pids are not recycled (cf. [22]). Q-05: (Andrew Morton [21]) Do attempts to signal that fd return errors? A-05: See {Q,A}-01. Q-06: (Andrew Morton [22]) Is there a cleaner way of obtaining the fd? Another syscall perhaps. A-06: Userspace can already trivially retrieve file descriptors from procfs so this is something that we will need to support anyway. Hence, there's no immediate need to add another syscalls just to make pidfd_send_signal() not dependent on the presence of procfs. However, adding a syscalls to get such file descriptors is planned for a future patchset (cf. [22]). Q-07: (Andrew Morton [21] and others) This fd-for-a-process sounds like a handy thing and people may well think up other uses for it in the future, probably unrelated to signals. Are the code and the interface designed to permit such future applications? A-07: Yes (cf. [22]). Q-08: (Andrew Morton [21] and others) Now I think about it, why a new syscall? This thing is looking rather like an ioctl? A-08: This has been extensively discussed. It was agreed that a syscall is preferred for a variety or reasons. Here are just a few taken from prior threads. Syscalls are safer than ioctl()s especially when signaling to fds. Processes are a core kernel concept so a syscall seems more appropriate. The layout of the syscall with its four arguments would require the addition of a custom struct for the ioctl() thereby causing at least the same amount or even more complexity for userspace than a simple syscall. The new syscall will replace multiple other pid-based syscalls (see description above). The file-descriptors-for-processes concept introduced with this syscall will be extended with other syscalls in the future. See also [22], [23] and various other threads already linked in here. Q-09: (Florian Weimer [24]) What happens if you use the new interface with an O_PATH descriptor? A-09: pidfds opened as O_PATH fds cannot be used to send signals to a process (cf. [2]). Signaling processes through pidfds is the equivalent of writing to a file. Thus, this is not an operation that operates "purely at the file descriptor level" as required by the open(2) manpage. See also [4]. /* References */ [1]: https://lore.kernel.org/lkml/20181029221037.87724-1-dancol@google.com/ [2]: https://lore.kernel.org/lkml/874lbtjvtd.fsf@oldenburg2.str.redhat.com/ [3]: https://lore.kernel.org/lkml/20181204132604.aspfupwjgjx6fhva@brauner.io/ [4]: https://lore.kernel.org/lkml/20181203180224.fkvw4kajtbvru2ku@brauner.io/ [5]: https://lore.kernel.org/lkml/20181121213946.GA10795@mail.hallyn.com/ [6]: https://lore.kernel.org/lkml/20181120103111.etlqp7zop34v6nv4@brauner.io/ [7]: https://lore.kernel.org/lkml/36323361-90BD-41AF-AB5B-EE0D7BA02C21@amacapital.net/ [8]: https://lore.kernel.org/lkml/87tvjxp8pc.fsf@xmission.com/ [9]: https://asciinema.org/a/IQjuCHew6bnq1cr78yuMv16cy [11]: https://lore.kernel.org/lkml/F53D6D38-3521-4C20-9034-5AF447DF62FF@amacapital.net/ [12]: https://lore.kernel.org/lkml/87zhtjn8ck.fsf@xmission.com/ [13]: https://lore.kernel.org/lkml/871s6u9z6u.fsf@xmission.com/ [14]: https://lore.kernel.org/lkml/20181206231742.xxi4ghn24z4h2qki@brauner.io/ [15]: https://lore.kernel.org/lkml/20181207003124.GA11160@mail.hallyn.com/ [16]: https://lore.kernel.org/lkml/20181207015423.4miorx43l3qhppfz@brauner.io/ [17]: https://lore.kernel.org/lkml/CAGXu5jL8PciZAXvOvCeCU3wKUEB_dU-O3q0tDw4uB_ojMvDEew@mail.gmail.com/ [18]: https://lore.kernel.org/lkml/20181206222746.GB9224@mail.hallyn.com/ [19]: https://lore.kernel.org/lkml/20181208054059.19813-1-christian@brauner.io/ [20]: https://lore.kernel.org/lkml/8736rebl9s.fsf@oldenburg.str.redhat.com/ [21]: https://lore.kernel.org/lkml/20181228152012.dbf0508c2508138efc5f2bbe@linux-foundation.org/ [22]: https://lore.kernel.org/lkml/20181228233725.722tdfgijxcssg76@brauner.io/ [23]: https://lwn.net/Articles/773459/ [24]: https://lore.kernel.org/lkml/8736rebl9s.fsf@oldenburg.str.redhat.com/ [25]: https://lore.kernel.org/lkml/CAK8P3a0ej9NcJM8wXNPbcGUyOUZYX+VLoDFdbenW3s3114oQZw@mail.gmail.com/ Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Jann Horn <jannh@google.com> Cc: Andy Lutomirsky <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Florian Weimer <fweimer@redhat.com> Signed-off-by: Christian Brauner <christian@brauner.io> Reviewed-by: Tycho Andersen <tycho@tycho.ws> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Serge Hallyn <serge@hallyn.com> Acked-by: Aleksa Sarai <cyphar@cyphar.com>
2018-11-19 07:51:56 +08:00
static inline struct pid *tgid_pidfd_to_pid(const struct file *file)
{
return ERR_PTR(-EBADF);
}
#endif /* CONFIG_PROC_FS */
struct net;
static inline struct proc_dir_entry *proc_net_mkdir(
struct net *net, const char *name, struct proc_dir_entry *parent)
{
return proc_mkdir_data(name, 0, parent, net);
}
struct ns_common;
int open_related_ns(struct ns_common *ns,
struct ns_common *(*get_ns)(struct ns_common *ns));
/* get the associated pid namespace for a file in procfs */
static inline struct pid_namespace *proc_pid_ns(struct super_block *sb)
{
return proc_sb_info(sb)->pid_ns;
}
nsproxy: attach to namespaces via pidfds For quite a while we have been thinking about using pidfds to attach to namespaces. This patchset has existed for about a year already but we've wanted to wait to see how the general api would be received and adopted. Now that more and more programs in userspace have started using pidfds for process management it's time to send this one out. This patch makes it possible to use pidfds to attach to the namespaces of another process, i.e. they can be passed as the first argument to the setns() syscall. When only a single namespace type is specified the semantics are equivalent to passing an nsfd. That means setns(nsfd, CLONE_NEWNET) equals setns(pidfd, CLONE_NEWNET). However, when a pidfd is passed, multiple namespace flags can be specified in the second setns() argument and setns() will attach the caller to all the specified namespaces all at once or to none of them. Specifying 0 is not valid together with a pidfd. Here are just two obvious examples: setns(pidfd, CLONE_NEWPID | CLONE_NEWNS | CLONE_NEWNET); setns(pidfd, CLONE_NEWUSER); Allowing to also attach subsets of namespaces supports various use-cases where callers setns to a subset of namespaces to retain privilege, perform an action and then re-attach another subset of namespaces. If the need arises, as Eric suggested, we can extend this patchset to assume even more context than just attaching all namespaces. His suggestion specifically was about assuming the process' root directory when setns(pidfd, 0) or setns(pidfd, SETNS_PIDFD) is specified. For now, just keep it flexible in terms of supporting subsets of namespaces but let's wait until we have users asking for even more context to be assumed. At that point we can add an extension. The obvious example where this is useful is a standard container manager interacting with a running container: pushing and pulling files or directories, injecting mounts, attaching/execing any kind of process, managing network devices all these operations require attaching to all or at least multiple namespaces at the same time. Given that nowadays most containers are spawned with all namespaces enabled we're currently looking at at least 14 syscalls, 7 to open the /proc/<pid>/ns/<ns> nsfds, another 7 to actually perform the namespace switch. With time namespaces we're looking at about 16 syscalls. (We could amortize the first 7 or 8 syscalls for opening the nsfds by stashing them in each container's monitor process but that would mean we need to send around those file descriptors through unix sockets everytime we want to interact with the container or keep on-disk state. Even in scenarios where a caller wants to join a particular namespace in a particular order callers still profit from batching other namespaces. That mostly applies to the user namespace but all container runtimes I found join the user namespace first no matter if it privileges or deprivileges the container similar to how unshare behaves.) With pidfds this becomes a single syscall no matter how many namespaces are supposed to be attached to. A decently designed, large-scale container manager usually isn't the parent of any of the containers it spawns so the containers don't die when it crashes or needs to update or reinitialize. This means that for the manager to interact with containers through pids is inherently racy especially on systems where the maximum pid number is not significicantly bumped. This is even more problematic since we often spawn and manage thousands or ten-thousands of containers. Interacting with a container through a pid thus can become risky quite quickly. Especially since we allow for an administrator to enable advanced features such as syscall interception where we're performing syscalls in lieu of the container. In all of those cases we use pidfds if they are available and we pass them around as stable references. Using them to setns() to the target process' namespaces is as reliable as using nsfds. Either the target process is already dead and we get ESRCH or we manage to attach to its namespaces but we can't accidently attach to another process' namespaces. So pidfds lend themselves to be used with this api. The other main advantage is that with this change the pidfd becomes the only relevant token for most container interactions and it's the only token we need to create and send around. Apart from significiantly reducing the number of syscalls from double digit to single digit which is a decent reason post-spectre/meltdown this also allows to switch to a set of namespaces atomically, i.e. either attaching to all the specified namespaces succeeds or we fail. If we fail we haven't changed a single namespace. There are currently three namespaces that can fail (other than for ENOMEM which really is not very interesting since we then have other problems anyway) for non-trivial reasons, user, mount, and pid namespaces. We can fail to attach to a pid namespace if it is not our current active pid namespace or a descendant of it. We can fail to attach to a user namespace because we are multi-threaded or because our current mount namespace shares filesystem state with other tasks, or because we're trying to setns() to the same user namespace, i.e. the target task has the same user namespace as we do. We can fail to attach to a mount namespace because it shares filesystem state with other tasks or because we fail to lookup the new root for the new mount namespace. In most non-pathological scenarios these issues can be somewhat mitigated. But there are cases where we're half-attached to some namespace and failing to attach to another one. I've talked about some of these problem during the hallway track (something only the pre-COVID-19 generation will remember) of Plumbers in Los Angeles in 2018(?). Even if all these issues could be avoided with super careful userspace coding it would be nicer to have this done in-kernel. Pidfds seem to lend themselves nicely for this. The other neat thing about this is that setns() becomes an actual counterpart to the namespace bits of unshare(). Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Reviewed-by: Serge Hallyn <serge@hallyn.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Serge Hallyn <serge@hallyn.com> Cc: Jann Horn <jannh@google.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Link: https://lore.kernel.org/r/20200505140432.181565-3-christian.brauner@ubuntu.com
2020-05-05 22:04:31 +08:00
bool proc_ns_file(const struct file *file);
#endif /* _LINUX_PROC_FS_H */