OpenCloudOS-Kernel/drivers/video/backlight/max8925_bl.c

198 lines
4.9 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Backlight driver for Maxim MAX8925
*
* Copyright (C) 2009 Marvell International Ltd.
* Haojian Zhuang <haojian.zhuang@marvell.com>
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/fb.h>
#include <linux/i2c.h>
#include <linux/backlight.h>
#include <linux/mfd/max8925.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/module.h>
#define MAX_BRIGHTNESS (0xff)
#define MIN_BRIGHTNESS (0)
#define LWX_FREQ(x) (((x - 601) / 100) & 0x7)
struct max8925_backlight_data {
struct max8925_chip *chip;
int current_brightness;
int reg_mode_cntl;
int reg_cntl;
};
static int max8925_backlight_set(struct backlight_device *bl, int brightness)
{
struct max8925_backlight_data *data = bl_get_data(bl);
struct max8925_chip *chip = data->chip;
unsigned char value;
int ret;
if (brightness > MAX_BRIGHTNESS)
value = MAX_BRIGHTNESS;
else
value = brightness;
ret = max8925_reg_write(chip->i2c, data->reg_cntl, value);
if (ret < 0)
goto out;
if (!data->current_brightness && brightness)
/* enable WLED output */
ret = max8925_set_bits(chip->i2c, data->reg_mode_cntl, 1, 1);
else if (!brightness)
/* disable WLED output */
ret = max8925_set_bits(chip->i2c, data->reg_mode_cntl, 1, 0);
if (ret < 0)
goto out;
dev_dbg(chip->dev, "set brightness %d\n", value);
data->current_brightness = value;
return 0;
out:
dev_dbg(chip->dev, "set brightness %d failure with return value:%d\n",
value, ret);
return ret;
}
static int max8925_backlight_update_status(struct backlight_device *bl)
{
return max8925_backlight_set(bl, backlight_get_brightness(bl));
}
static int max8925_backlight_get_brightness(struct backlight_device *bl)
{
struct max8925_backlight_data *data = bl_get_data(bl);
struct max8925_chip *chip = data->chip;
int ret;
ret = max8925_reg_read(chip->i2c, data->reg_cntl);
if (ret < 0)
return -EINVAL;
data->current_brightness = ret;
dev_dbg(chip->dev, "get brightness %d\n", data->current_brightness);
return ret;
}
static const struct backlight_ops max8925_backlight_ops = {
.options = BL_CORE_SUSPENDRESUME,
.update_status = max8925_backlight_update_status,
.get_brightness = max8925_backlight_get_brightness,
};
static void max8925_backlight_dt_init(struct platform_device *pdev)
{
struct device_node *nproot = pdev->dev.parent->of_node, *np;
struct max8925_backlight_pdata *pdata;
u32 val;
if (!nproot || !IS_ENABLED(CONFIG_OF))
return;
pdata = devm_kzalloc(&pdev->dev,
sizeof(struct max8925_backlight_pdata),
GFP_KERNEL);
if (!pdata)
return;
np = of_get_child_by_name(nproot, "backlight");
if (!np) {
dev_err(&pdev->dev, "failed to find backlight node\n");
return;
}
if (!of_property_read_u32(np, "maxim,max8925-dual-string", &val))
pdata->dual_string = val;
of_node_put(np);
pdev->dev.platform_data = pdata;
}
static int max8925_backlight_probe(struct platform_device *pdev)
{
struct max8925_chip *chip = dev_get_drvdata(pdev->dev.parent);
struct max8925_backlight_pdata *pdata;
struct max8925_backlight_data *data;
struct backlight_device *bl;
struct backlight_properties props;
struct resource *res;
unsigned char value;
int ret = 0;
data = devm_kzalloc(&pdev->dev, sizeof(struct max8925_backlight_data),
GFP_KERNEL);
if (data == NULL)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_REG, 0);
if (!res) {
dev_err(&pdev->dev, "No REG resource for mode control!\n");
return -ENXIO;
}
data->reg_mode_cntl = res->start;
res = platform_get_resource(pdev, IORESOURCE_REG, 1);
if (!res) {
dev_err(&pdev->dev, "No REG resource for control!\n");
return -ENXIO;
}
data->reg_cntl = res->start;
data->chip = chip;
data->current_brightness = 0;
memset(&props, 0, sizeof(struct backlight_properties));
props.type = BACKLIGHT_RAW;
props.max_brightness = MAX_BRIGHTNESS;
bl = devm_backlight_device_register(&pdev->dev, "max8925-backlight",
&pdev->dev, data,
&max8925_backlight_ops, &props);
if (IS_ERR(bl)) {
dev_err(&pdev->dev, "failed to register backlight\n");
return PTR_ERR(bl);
}
bl->props.brightness = MAX_BRIGHTNESS;
platform_set_drvdata(pdev, bl);
value = 0;
if (!pdev->dev.platform_data)
max8925_backlight_dt_init(pdev);
pdata = pdev->dev.platform_data;
if (pdata) {
if (pdata->lxw_scl)
value |= (1 << 7);
if (pdata->lxw_freq)
value |= (LWX_FREQ(pdata->lxw_freq) << 4);
if (pdata->dual_string)
value |= (1 << 1);
}
ret = max8925_set_bits(chip->i2c, data->reg_mode_cntl, 0xfe, value);
if (ret < 0)
return ret;
backlight_update_status(bl);
return 0;
}
static struct platform_driver max8925_backlight_driver = {
.driver = {
.name = "max8925-backlight",
},
.probe = max8925_backlight_probe,
};
module_platform_driver(max8925_backlight_driver);
MODULE_DESCRIPTION("Backlight Driver for Maxim MAX8925");
MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:max8925-backlight");