2015-03-03 05:01:12 +08:00
|
|
|
/*
|
|
|
|
* Copyright © 2014-2015 Broadcom
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
|
|
* published by the Free Software Foundation.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#ifndef VC4_REGS_H
|
|
|
|
#define VC4_REGS_H
|
|
|
|
|
|
|
|
#include <linux/bitops.h>
|
|
|
|
|
|
|
|
#define VC4_MASK(high, low) ((u32)GENMASK(high, low))
|
|
|
|
/* Using the GNU statement expression extension */
|
|
|
|
#define VC4_SET_FIELD(value, field) \
|
|
|
|
({ \
|
|
|
|
uint32_t fieldval = (value) << field##_SHIFT; \
|
|
|
|
WARN_ON((fieldval & ~field##_MASK) != 0); \
|
|
|
|
fieldval & field##_MASK; \
|
|
|
|
})
|
|
|
|
|
|
|
|
#define VC4_GET_FIELD(word, field) (((word) & field##_MASK) >> \
|
|
|
|
field##_SHIFT)
|
|
|
|
|
|
|
|
#define V3D_IDENT0 0x00000
|
|
|
|
# define V3D_EXPECTED_IDENT0 \
|
|
|
|
((2 << 24) | \
|
|
|
|
('V' << 0) | \
|
|
|
|
('3' << 8) | \
|
|
|
|
('D' << 16))
|
|
|
|
|
|
|
|
#define V3D_IDENT1 0x00004
|
|
|
|
/* Multiples of 1kb */
|
|
|
|
# define V3D_IDENT1_VPM_SIZE_MASK VC4_MASK(31, 28)
|
|
|
|
# define V3D_IDENT1_VPM_SIZE_SHIFT 28
|
|
|
|
# define V3D_IDENT1_NSEM_MASK VC4_MASK(23, 16)
|
|
|
|
# define V3D_IDENT1_NSEM_SHIFT 16
|
|
|
|
# define V3D_IDENT1_TUPS_MASK VC4_MASK(15, 12)
|
|
|
|
# define V3D_IDENT1_TUPS_SHIFT 12
|
|
|
|
# define V3D_IDENT1_QUPS_MASK VC4_MASK(11, 8)
|
|
|
|
# define V3D_IDENT1_QUPS_SHIFT 8
|
|
|
|
# define V3D_IDENT1_NSLC_MASK VC4_MASK(7, 4)
|
|
|
|
# define V3D_IDENT1_NSLC_SHIFT 4
|
|
|
|
# define V3D_IDENT1_REV_MASK VC4_MASK(3, 0)
|
|
|
|
# define V3D_IDENT1_REV_SHIFT 0
|
|
|
|
|
|
|
|
#define V3D_IDENT2 0x00008
|
|
|
|
#define V3D_SCRATCH 0x00010
|
|
|
|
#define V3D_L2CACTL 0x00020
|
|
|
|
# define V3D_L2CACTL_L2CCLR BIT(2)
|
|
|
|
# define V3D_L2CACTL_L2CDIS BIT(1)
|
|
|
|
# define V3D_L2CACTL_L2CENA BIT(0)
|
|
|
|
|
|
|
|
#define V3D_SLCACTL 0x00024
|
|
|
|
# define V3D_SLCACTL_T1CC_MASK VC4_MASK(27, 24)
|
|
|
|
# define V3D_SLCACTL_T1CC_SHIFT 24
|
|
|
|
# define V3D_SLCACTL_T0CC_MASK VC4_MASK(19, 16)
|
|
|
|
# define V3D_SLCACTL_T0CC_SHIFT 16
|
|
|
|
# define V3D_SLCACTL_UCC_MASK VC4_MASK(11, 8)
|
|
|
|
# define V3D_SLCACTL_UCC_SHIFT 8
|
|
|
|
# define V3D_SLCACTL_ICC_MASK VC4_MASK(3, 0)
|
|
|
|
# define V3D_SLCACTL_ICC_SHIFT 0
|
|
|
|
|
|
|
|
#define V3D_INTCTL 0x00030
|
|
|
|
#define V3D_INTENA 0x00034
|
|
|
|
#define V3D_INTDIS 0x00038
|
|
|
|
# define V3D_INT_SPILLUSE BIT(3)
|
|
|
|
# define V3D_INT_OUTOMEM BIT(2)
|
|
|
|
# define V3D_INT_FLDONE BIT(1)
|
|
|
|
# define V3D_INT_FRDONE BIT(0)
|
|
|
|
|
|
|
|
#define V3D_CT0CS 0x00100
|
|
|
|
#define V3D_CT1CS 0x00104
|
|
|
|
#define V3D_CTNCS(n) (V3D_CT0CS + 4 * n)
|
|
|
|
# define V3D_CTRSTA BIT(15)
|
|
|
|
# define V3D_CTSEMA BIT(12)
|
|
|
|
# define V3D_CTRTSD BIT(8)
|
|
|
|
# define V3D_CTRUN BIT(5)
|
|
|
|
# define V3D_CTSUBS BIT(4)
|
|
|
|
# define V3D_CTERR BIT(3)
|
|
|
|
# define V3D_CTMODE BIT(0)
|
|
|
|
|
|
|
|
#define V3D_CT0EA 0x00108
|
|
|
|
#define V3D_CT1EA 0x0010c
|
|
|
|
#define V3D_CTNEA(n) (V3D_CT0EA + 4 * (n))
|
|
|
|
#define V3D_CT0CA 0x00110
|
|
|
|
#define V3D_CT1CA 0x00114
|
|
|
|
#define V3D_CTNCA(n) (V3D_CT0CA + 4 * (n))
|
|
|
|
#define V3D_CT00RA0 0x00118
|
|
|
|
#define V3D_CT01RA0 0x0011c
|
|
|
|
#define V3D_CTNRA0(n) (V3D_CT00RA0 + 4 * (n))
|
|
|
|
#define V3D_CT0LC 0x00120
|
|
|
|
#define V3D_CT1LC 0x00124
|
|
|
|
#define V3D_CTNLC(n) (V3D_CT0LC + 4 * (n))
|
|
|
|
#define V3D_CT0PC 0x00128
|
|
|
|
#define V3D_CT1PC 0x0012c
|
|
|
|
#define V3D_CTNPC(n) (V3D_CT0PC + 4 * (n))
|
|
|
|
|
|
|
|
#define V3D_PCS 0x00130
|
|
|
|
# define V3D_BMOOM BIT(8)
|
|
|
|
# define V3D_RMBUSY BIT(3)
|
|
|
|
# define V3D_RMACTIVE BIT(2)
|
|
|
|
# define V3D_BMBUSY BIT(1)
|
|
|
|
# define V3D_BMACTIVE BIT(0)
|
|
|
|
|
|
|
|
#define V3D_BFC 0x00134
|
|
|
|
#define V3D_RFC 0x00138
|
|
|
|
#define V3D_BPCA 0x00300
|
|
|
|
#define V3D_BPCS 0x00304
|
|
|
|
#define V3D_BPOA 0x00308
|
|
|
|
#define V3D_BPOS 0x0030c
|
|
|
|
#define V3D_BXCF 0x00310
|
|
|
|
#define V3D_SQRSV0 0x00410
|
|
|
|
#define V3D_SQRSV1 0x00414
|
|
|
|
#define V3D_SQCNTL 0x00418
|
|
|
|
#define V3D_SRQPC 0x00430
|
|
|
|
#define V3D_SRQUA 0x00434
|
|
|
|
#define V3D_SRQUL 0x00438
|
|
|
|
#define V3D_SRQCS 0x0043c
|
|
|
|
#define V3D_VPACNTL 0x00500
|
|
|
|
#define V3D_VPMBASE 0x00504
|
|
|
|
#define V3D_PCTRC 0x00670
|
|
|
|
#define V3D_PCTRE 0x00674
|
|
|
|
#define V3D_PCTR0 0x00680
|
|
|
|
#define V3D_PCTRS0 0x00684
|
|
|
|
#define V3D_PCTR1 0x00688
|
|
|
|
#define V3D_PCTRS1 0x0068c
|
|
|
|
#define V3D_PCTR2 0x00690
|
|
|
|
#define V3D_PCTRS2 0x00694
|
|
|
|
#define V3D_PCTR3 0x00698
|
|
|
|
#define V3D_PCTRS3 0x0069c
|
|
|
|
#define V3D_PCTR4 0x006a0
|
|
|
|
#define V3D_PCTRS4 0x006a4
|
|
|
|
#define V3D_PCTR5 0x006a8
|
|
|
|
#define V3D_PCTRS5 0x006ac
|
|
|
|
#define V3D_PCTR6 0x006b0
|
|
|
|
#define V3D_PCTRS6 0x006b4
|
|
|
|
#define V3D_PCTR7 0x006b8
|
|
|
|
#define V3D_PCTRS7 0x006bc
|
|
|
|
#define V3D_PCTR8 0x006c0
|
|
|
|
#define V3D_PCTRS8 0x006c4
|
|
|
|
#define V3D_PCTR9 0x006c8
|
|
|
|
#define V3D_PCTRS9 0x006cc
|
|
|
|
#define V3D_PCTR10 0x006d0
|
|
|
|
#define V3D_PCTRS10 0x006d4
|
|
|
|
#define V3D_PCTR11 0x006d8
|
|
|
|
#define V3D_PCTRS11 0x006dc
|
|
|
|
#define V3D_PCTR12 0x006e0
|
|
|
|
#define V3D_PCTRS12 0x006e4
|
|
|
|
#define V3D_PCTR13 0x006e8
|
|
|
|
#define V3D_PCTRS13 0x006ec
|
|
|
|
#define V3D_PCTR14 0x006f0
|
|
|
|
#define V3D_PCTRS14 0x006f4
|
|
|
|
#define V3D_PCTR15 0x006f8
|
|
|
|
#define V3D_PCTRS15 0x006fc
|
2015-10-23 21:57:22 +08:00
|
|
|
#define V3D_DBGE 0x00f00
|
2015-03-03 05:01:12 +08:00
|
|
|
#define V3D_FDBGO 0x00f04
|
|
|
|
#define V3D_FDBGB 0x00f08
|
|
|
|
#define V3D_FDBGR 0x00f0c
|
|
|
|
#define V3D_FDBGS 0x00f10
|
|
|
|
#define V3D_ERRSTAT 0x00f20
|
|
|
|
|
|
|
|
#define PV_CONTROL 0x00
|
|
|
|
# define PV_CONTROL_FORMAT_MASK VC4_MASK(23, 21)
|
|
|
|
# define PV_CONTROL_FORMAT_SHIFT 21
|
|
|
|
# define PV_CONTROL_FORMAT_24 0
|
|
|
|
# define PV_CONTROL_FORMAT_DSIV_16 1
|
|
|
|
# define PV_CONTROL_FORMAT_DSIC_16 2
|
|
|
|
# define PV_CONTROL_FORMAT_DSIV_18 3
|
|
|
|
# define PV_CONTROL_FORMAT_DSIV_24 4
|
|
|
|
|
|
|
|
# define PV_CONTROL_FIFO_LEVEL_MASK VC4_MASK(20, 15)
|
|
|
|
# define PV_CONTROL_FIFO_LEVEL_SHIFT 15
|
|
|
|
# define PV_CONTROL_CLR_AT_START BIT(14)
|
|
|
|
# define PV_CONTROL_TRIGGER_UNDERFLOW BIT(13)
|
|
|
|
# define PV_CONTROL_WAIT_HSTART BIT(12)
|
2016-09-30 06:34:44 +08:00
|
|
|
# define PV_CONTROL_PIXEL_REP_MASK VC4_MASK(5, 4)
|
|
|
|
# define PV_CONTROL_PIXEL_REP_SHIFT 4
|
2016-12-02 21:48:07 +08:00
|
|
|
# define PV_CONTROL_CLK_SELECT_DSI 0
|
2015-03-03 05:01:12 +08:00
|
|
|
# define PV_CONTROL_CLK_SELECT_DPI_SMI_HDMI 1
|
2016-12-02 21:48:07 +08:00
|
|
|
# define PV_CONTROL_CLK_SELECT_VEC 2
|
2015-03-03 05:01:12 +08:00
|
|
|
# define PV_CONTROL_CLK_SELECT_MASK VC4_MASK(3, 2)
|
|
|
|
# define PV_CONTROL_CLK_SELECT_SHIFT 2
|
|
|
|
# define PV_CONTROL_FIFO_CLR BIT(1)
|
|
|
|
# define PV_CONTROL_EN BIT(0)
|
|
|
|
|
|
|
|
#define PV_V_CONTROL 0x04
|
2016-09-29 08:30:25 +08:00
|
|
|
# define PV_VCONTROL_ODD_DELAY_MASK VC4_MASK(22, 6)
|
|
|
|
# define PV_VCONTROL_ODD_DELAY_SHIFT 6
|
|
|
|
# define PV_VCONTROL_ODD_FIRST BIT(5)
|
2015-03-03 05:01:12 +08:00
|
|
|
# define PV_VCONTROL_INTERLACE BIT(4)
|
2016-12-15 03:46:15 +08:00
|
|
|
# define PV_VCONTROL_DSI BIT(3)
|
|
|
|
# define PV_VCONTROL_COMMAND BIT(2)
|
2015-03-03 05:01:12 +08:00
|
|
|
# define PV_VCONTROL_CONTINUOUS BIT(1)
|
|
|
|
# define PV_VCONTROL_VIDEN BIT(0)
|
|
|
|
|
2016-02-16 09:06:02 +08:00
|
|
|
#define PV_VSYNCD_EVEN 0x08
|
2015-03-03 05:01:12 +08:00
|
|
|
|
|
|
|
#define PV_HORZA 0x0c
|
|
|
|
# define PV_HORZA_HBP_MASK VC4_MASK(31, 16)
|
|
|
|
# define PV_HORZA_HBP_SHIFT 16
|
|
|
|
# define PV_HORZA_HSYNC_MASK VC4_MASK(15, 0)
|
|
|
|
# define PV_HORZA_HSYNC_SHIFT 0
|
|
|
|
|
|
|
|
#define PV_HORZB 0x10
|
|
|
|
# define PV_HORZB_HFP_MASK VC4_MASK(31, 16)
|
|
|
|
# define PV_HORZB_HFP_SHIFT 16
|
|
|
|
# define PV_HORZB_HACTIVE_MASK VC4_MASK(15, 0)
|
|
|
|
# define PV_HORZB_HACTIVE_SHIFT 0
|
|
|
|
|
|
|
|
#define PV_VERTA 0x14
|
|
|
|
# define PV_VERTA_VBP_MASK VC4_MASK(31, 16)
|
|
|
|
# define PV_VERTA_VBP_SHIFT 16
|
|
|
|
# define PV_VERTA_VSYNC_MASK VC4_MASK(15, 0)
|
|
|
|
# define PV_VERTA_VSYNC_SHIFT 0
|
|
|
|
|
|
|
|
#define PV_VERTB 0x18
|
|
|
|
# define PV_VERTB_VFP_MASK VC4_MASK(31, 16)
|
|
|
|
# define PV_VERTB_VFP_SHIFT 16
|
|
|
|
# define PV_VERTB_VACTIVE_MASK VC4_MASK(15, 0)
|
|
|
|
# define PV_VERTB_VACTIVE_SHIFT 0
|
|
|
|
|
|
|
|
#define PV_VERTA_EVEN 0x1c
|
|
|
|
#define PV_VERTB_EVEN 0x20
|
|
|
|
|
|
|
|
#define PV_INTEN 0x24
|
|
|
|
#define PV_INTSTAT 0x28
|
|
|
|
# define PV_INT_VID_IDLE BIT(9)
|
|
|
|
# define PV_INT_VFP_END BIT(8)
|
|
|
|
# define PV_INT_VFP_START BIT(7)
|
|
|
|
# define PV_INT_VACT_START BIT(6)
|
|
|
|
# define PV_INT_VBP_START BIT(5)
|
|
|
|
# define PV_INT_VSYNC_START BIT(4)
|
|
|
|
# define PV_INT_HFP_START BIT(3)
|
|
|
|
# define PV_INT_HACT_START BIT(2)
|
|
|
|
# define PV_INT_HBP_START BIT(1)
|
|
|
|
# define PV_INT_HSYNC_START BIT(0)
|
|
|
|
|
|
|
|
#define PV_STAT 0x2c
|
|
|
|
|
|
|
|
#define PV_HACT_ACT 0x30
|
|
|
|
|
|
|
|
#define SCALER_DISPCTRL 0x00000000
|
|
|
|
/* Global register for clock gating the HVS */
|
|
|
|
# define SCALER_DISPCTRL_ENABLE BIT(31)
|
|
|
|
# define SCALER_DISPCTRL_DSP2EISLUR BIT(15)
|
|
|
|
# define SCALER_DISPCTRL_DSP1EISLUR BIT(14)
|
2016-12-15 03:46:14 +08:00
|
|
|
# define SCALER_DISPCTRL_DSP3_MUX_MASK VC4_MASK(19, 18)
|
|
|
|
# define SCALER_DISPCTRL_DSP3_MUX_SHIFT 18
|
|
|
|
|
2015-03-03 05:01:12 +08:00
|
|
|
/* Enables Display 0 short line and underrun contribution to
|
|
|
|
* SCALER_DISPSTAT_IRQDISP0. Note that short frame contributions are
|
|
|
|
* always enabled.
|
|
|
|
*/
|
|
|
|
# define SCALER_DISPCTRL_DSP0EISLUR BIT(13)
|
|
|
|
# define SCALER_DISPCTRL_DSP2EIEOLN BIT(12)
|
|
|
|
# define SCALER_DISPCTRL_DSP2EIEOF BIT(11)
|
|
|
|
# define SCALER_DISPCTRL_DSP1EIEOLN BIT(10)
|
|
|
|
# define SCALER_DISPCTRL_DSP1EIEOF BIT(9)
|
|
|
|
/* Enables Display 0 end-of-line-N contribution to
|
|
|
|
* SCALER_DISPSTAT_IRQDISP0
|
|
|
|
*/
|
|
|
|
# define SCALER_DISPCTRL_DSP0EIEOLN BIT(8)
|
|
|
|
/* Enables Display 0 EOF contribution to SCALER_DISPSTAT_IRQDISP0 */
|
|
|
|
# define SCALER_DISPCTRL_DSP0EIEOF BIT(7)
|
|
|
|
|
|
|
|
# define SCALER_DISPCTRL_SLVRDEIRQ BIT(6)
|
|
|
|
# define SCALER_DISPCTRL_SLVWREIRQ BIT(5)
|
|
|
|
# define SCALER_DISPCTRL_DMAEIRQ BIT(4)
|
|
|
|
# define SCALER_DISPCTRL_DISP2EIRQ BIT(3)
|
|
|
|
# define SCALER_DISPCTRL_DISP1EIRQ BIT(2)
|
|
|
|
/* Enables interrupt generation on the enabled EOF/EOLN/EISLUR
|
|
|
|
* bits and short frames..
|
|
|
|
*/
|
|
|
|
# define SCALER_DISPCTRL_DISP0EIRQ BIT(1)
|
|
|
|
/* Enables interrupt generation on scaler profiler interrupt. */
|
|
|
|
# define SCALER_DISPCTRL_SCLEIRQ BIT(0)
|
|
|
|
|
|
|
|
#define SCALER_DISPSTAT 0x00000004
|
|
|
|
# define SCALER_DISPSTAT_COBLOW2 BIT(29)
|
|
|
|
# define SCALER_DISPSTAT_EOLN2 BIT(28)
|
|
|
|
# define SCALER_DISPSTAT_ESFRAME2 BIT(27)
|
|
|
|
# define SCALER_DISPSTAT_ESLINE2 BIT(26)
|
|
|
|
# define SCALER_DISPSTAT_EUFLOW2 BIT(25)
|
|
|
|
# define SCALER_DISPSTAT_EOF2 BIT(24)
|
|
|
|
|
|
|
|
# define SCALER_DISPSTAT_COBLOW1 BIT(21)
|
|
|
|
# define SCALER_DISPSTAT_EOLN1 BIT(20)
|
|
|
|
# define SCALER_DISPSTAT_ESFRAME1 BIT(19)
|
|
|
|
# define SCALER_DISPSTAT_ESLINE1 BIT(18)
|
|
|
|
# define SCALER_DISPSTAT_EUFLOW1 BIT(17)
|
|
|
|
# define SCALER_DISPSTAT_EOF1 BIT(16)
|
|
|
|
|
|
|
|
# define SCALER_DISPSTAT_RESP_MASK VC4_MASK(15, 14)
|
|
|
|
# define SCALER_DISPSTAT_RESP_SHIFT 14
|
|
|
|
# define SCALER_DISPSTAT_RESP_OKAY 0
|
|
|
|
# define SCALER_DISPSTAT_RESP_EXOKAY 1
|
|
|
|
# define SCALER_DISPSTAT_RESP_SLVERR 2
|
|
|
|
# define SCALER_DISPSTAT_RESP_DECERR 3
|
|
|
|
|
|
|
|
# define SCALER_DISPSTAT_COBLOW0 BIT(13)
|
|
|
|
/* Set when the DISPEOLN line is done compositing. */
|
|
|
|
# define SCALER_DISPSTAT_EOLN0 BIT(12)
|
|
|
|
/* Set when VSTART is seen but there are still pixels in the current
|
|
|
|
* output line.
|
|
|
|
*/
|
|
|
|
# define SCALER_DISPSTAT_ESFRAME0 BIT(11)
|
|
|
|
/* Set when HSTART is seen but there are still pixels in the current
|
|
|
|
* output line.
|
|
|
|
*/
|
|
|
|
# define SCALER_DISPSTAT_ESLINE0 BIT(10)
|
|
|
|
/* Set when the the downstream tries to read from the display FIFO
|
|
|
|
* while it's empty.
|
|
|
|
*/
|
|
|
|
# define SCALER_DISPSTAT_EUFLOW0 BIT(9)
|
|
|
|
/* Set when the display mode changes from RUN to EOF */
|
|
|
|
# define SCALER_DISPSTAT_EOF0 BIT(8)
|
|
|
|
|
|
|
|
/* Set on AXI invalid DMA ID error. */
|
|
|
|
# define SCALER_DISPSTAT_DMA_ERROR BIT(7)
|
|
|
|
/* Set on AXI slave read decode error */
|
|
|
|
# define SCALER_DISPSTAT_IRQSLVRD BIT(6)
|
|
|
|
/* Set on AXI slave write decode error */
|
|
|
|
# define SCALER_DISPSTAT_IRQSLVWR BIT(5)
|
|
|
|
/* Set when SCALER_DISPSTAT_DMA_ERROR is set, or
|
|
|
|
* SCALER_DISPSTAT_RESP_ERROR is not SCALER_DISPSTAT_RESP_OKAY.
|
|
|
|
*/
|
|
|
|
# define SCALER_DISPSTAT_IRQDMA BIT(4)
|
|
|
|
# define SCALER_DISPSTAT_IRQDISP2 BIT(3)
|
|
|
|
# define SCALER_DISPSTAT_IRQDISP1 BIT(2)
|
|
|
|
/* Set when any of the EOF/EOLN/ESFRAME/ESLINE bits are set and their
|
|
|
|
* corresponding interrupt bit is enabled in DISPCTRL.
|
|
|
|
*/
|
|
|
|
# define SCALER_DISPSTAT_IRQDISP0 BIT(1)
|
|
|
|
/* On read, the profiler interrupt. On write, clear *all* interrupt bits. */
|
|
|
|
# define SCALER_DISPSTAT_IRQSCL BIT(0)
|
|
|
|
|
|
|
|
#define SCALER_DISPID 0x00000008
|
|
|
|
#define SCALER_DISPECTRL 0x0000000c
|
|
|
|
#define SCALER_DISPPROF 0x00000010
|
|
|
|
#define SCALER_DISPDITHER 0x00000014
|
|
|
|
#define SCALER_DISPEOLN 0x00000018
|
|
|
|
#define SCALER_DISPLIST0 0x00000020
|
|
|
|
#define SCALER_DISPLIST1 0x00000024
|
|
|
|
#define SCALER_DISPLIST2 0x00000028
|
|
|
|
#define SCALER_DISPLSTAT 0x0000002c
|
|
|
|
#define SCALER_DISPLISTX(x) (SCALER_DISPLIST0 + \
|
|
|
|
(x) * (SCALER_DISPLIST1 - \
|
|
|
|
SCALER_DISPLIST0))
|
|
|
|
|
|
|
|
#define SCALER_DISPLACT0 0x00000030
|
|
|
|
#define SCALER_DISPLACT1 0x00000034
|
|
|
|
#define SCALER_DISPLACT2 0x00000038
|
drm/vc4: Make pageflip completion handling more robust.
Protect both the setup of the pageflip event and the
latching of the new requested displaylist head pointer
by the event lock, so we can't get into a situation
where vc4_atomic_flush latches the new display list via
HVS_WRITE, then immediately gets preempted before queueing
the pageflip event, then the page-flip completes in hw and
the vc4_crtc_handle_page_flip() runs and no-ops due to
lack of a pending pageflip event, then vc4_atomic_flush
continues and only then queues the pageflip event - after
the page flip handling already no-oped. This would cause
flip completion handling only at the next vblank - one
frame too late.
In vc4_crtc_handle_page_flip() check the actual DL head
pointer in SCALER_DISPLACTX against the requested pointer
for page flip to make sure that the flip actually really
completed in the current vblank and doesn't get deferred
to the next one because the DL head pointer was written
a bit too late into SCALER_DISPLISTX, after start of
vblank, and missed the boat. This avoids handling a
pageflip completion too early - one frame too early.
According to Eric, DL head pointer updates which were
written into the HVS DISPLISTX reg get committed to hardware
at the last pixel of active scanout. Our vblank interrupt
handler, as triggered by PV_INT_VFP_START irq, gets to run
earliest at the first pixel of HBLANK at the end of the
last scanline of active scanout, ie. vblank irq handling
runs at least 1 pixel duration after a potential pageflip
completion happened in hardware.
This ordering of events in the hardware, together with the
lock protection and SCALER_DISPLACTX sampling of this patch,
guarantees that pageflip completion handling only runs at
exactly the vblank irq of actual pageflip completion in all
cases.
Background info from Eric about the relative timing of
HVS, PV's and trigger points for interrupts, DL updates:
https://lists.freedesktop.org/archives/dri-devel/2016-May/107510.html
Tested on RPi 2B with hardware timing measurement equipment
and shown to no longer complete flips too early or too late.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
2016-05-18 20:02:46 +08:00
|
|
|
#define SCALER_DISPLACTX(x) (SCALER_DISPLACT0 + \
|
|
|
|
(x) * (SCALER_DISPLACT1 - \
|
|
|
|
SCALER_DISPLACT0))
|
|
|
|
|
2015-03-03 05:01:12 +08:00
|
|
|
#define SCALER_DISPCTRL0 0x00000040
|
|
|
|
# define SCALER_DISPCTRLX_ENABLE BIT(31)
|
|
|
|
# define SCALER_DISPCTRLX_RESET BIT(30)
|
|
|
|
# define SCALER_DISPCTRLX_WIDTH_MASK VC4_MASK(23, 12)
|
|
|
|
# define SCALER_DISPCTRLX_WIDTH_SHIFT 12
|
|
|
|
# define SCALER_DISPCTRLX_HEIGHT_MASK VC4_MASK(11, 0)
|
|
|
|
# define SCALER_DISPCTRLX_HEIGHT_SHIFT 0
|
|
|
|
|
|
|
|
#define SCALER_DISPBKGND0 0x00000044
|
2016-02-17 02:24:08 +08:00
|
|
|
# define SCALER_DISPBKGND_AUTOHS BIT(31)
|
|
|
|
# define SCALER_DISPBKGND_INTERLACE BIT(30)
|
|
|
|
# define SCALER_DISPBKGND_GAMMA BIT(29)
|
|
|
|
# define SCALER_DISPBKGND_TESTMODE_MASK VC4_MASK(28, 25)
|
|
|
|
# define SCALER_DISPBKGND_TESTMODE_SHIFT 25
|
|
|
|
/* Enables filling the scaler line with the RGB value in the low 24
|
|
|
|
* bits before compositing. Costs cycles, so should be skipped if
|
|
|
|
* opaque display planes will cover everything.
|
|
|
|
*/
|
|
|
|
# define SCALER_DISPBKGND_FILL BIT(24)
|
|
|
|
|
2015-03-03 05:01:12 +08:00
|
|
|
#define SCALER_DISPSTAT0 0x00000048
|
|
|
|
# define SCALER_DISPSTATX_MODE_MASK VC4_MASK(31, 30)
|
|
|
|
# define SCALER_DISPSTATX_MODE_SHIFT 30
|
|
|
|
# define SCALER_DISPSTATX_MODE_DISABLED 0
|
|
|
|
# define SCALER_DISPSTATX_MODE_INIT 1
|
|
|
|
# define SCALER_DISPSTATX_MODE_RUN 2
|
|
|
|
# define SCALER_DISPSTATX_MODE_EOF 3
|
|
|
|
# define SCALER_DISPSTATX_FULL BIT(29)
|
|
|
|
# define SCALER_DISPSTATX_EMPTY BIT(28)
|
drm/vc4: Implement precise vblank timestamping.
Precise vblank timestamping is implemented via the
usual scanout position based method. On VC4 the
pixelvalves PV do not have a scanout position
register. Only the hardware video scaler HVS has a
similar register which describes which scanline for
the output is currently composited and stored in the
HVS fifo for later consumption by the PV.
This causes a problem in that the HVS runs at a much
faster clock (system clock / audio gate) than the PV
which runs at video mode dot clock, so the unless the
fifo between HVS and PV is full, the HVS will progress
faster in its observable read line position than video
scan rate, so the HVS position reading can't be directly
translated into a scanout position for timestamp correction.
Additionally when the PV is in vblank, it doesn't consume
from the fifo, so the fifo gets full very quickly and then
the HVS stops compositing until the PV enters active scanout
and starts consuming scanlines from the fifo again, making
new space for the HVS to composite.
Therefore a simple translation of HVS read position into
elapsed time since (or to) start of active scanout does
not work, but for the most interesting cases we can still
get useful and sufficiently accurate results:
1. The PV enters active scanout of a new frame with the
fifo of the HVS completely full, and the HVS can refill
any fifo line which gets consumed and thereby freed up by
the PV during active scanout very quickly. Therefore the
PV and HVS work effectively in lock-step during active
scanout with the fifo never having more than 1 scanline
freed up by the PV before it gets refilled. The PV's
real scanout position is therefore trailing the HVS
compositing position as scanoutpos = hvspos - fifosize
and we can get the true scanoutpos as HVS readpos minus
fifo size, so precise timestamping works while in active
scanout, except for the last few scanlines of the frame,
when the HVS reaches end of frame, stops compositing and
the PV catches up and drains the fifo. This special case
would only introduce minor errors though.
2. If we are in vblank, then we can only guess something
reasonable. If called from vblank irq, we assume the irq is
usually dispatched with minimum delay, so we can take a
timestamp taken at entry into the vblank irq handler as a
baseline and then add a full vblank duration until the
guessed start of active scanout. As irq dispatch is usually
pretty low latency this works with relatively low jitter and
good results.
If we aren't called from vblank then we could be anywhere
within the vblank interval, so we return a neutral result,
simply the current system timestamp, and hope for the best.
Measurement shows the generated timestamps to be rather precise,
and at least never off more than 1 vblank duration worst-case.
Limitations: Doesn't work well yet for interlaced video modes,
therefore disabled in interlaced mode for now.
v2: Use the DISPBASE registers to determine the FIFO size (changes
by anholt)
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-and-tested-by: Mario Kleiner <mario.kleiner.de@gmail.com> (v2)
2016-06-23 14:17:50 +08:00
|
|
|
# define SCALER_DISPSTATX_FRAME_COUNT_MASK VC4_MASK(17, 12)
|
|
|
|
# define SCALER_DISPSTATX_FRAME_COUNT_SHIFT 12
|
|
|
|
# define SCALER_DISPSTATX_LINE_MASK VC4_MASK(11, 0)
|
|
|
|
# define SCALER_DISPSTATX_LINE_SHIFT 0
|
|
|
|
|
|
|
|
#define SCALER_DISPBASE0 0x0000004c
|
|
|
|
/* Last pixel in the COB (display FIFO memory) allocated to this HVS
|
|
|
|
* channel. Must be 4-pixel aligned (and thus 4 pixels less than the
|
|
|
|
* next COB base).
|
|
|
|
*/
|
|
|
|
# define SCALER_DISPBASEX_TOP_MASK VC4_MASK(31, 16)
|
|
|
|
# define SCALER_DISPBASEX_TOP_SHIFT 16
|
|
|
|
/* First pixel in the COB (display FIFO memory) allocated to this HVS
|
|
|
|
* channel. Must be 4-pixel aligned.
|
|
|
|
*/
|
|
|
|
# define SCALER_DISPBASEX_BASE_MASK VC4_MASK(15, 0)
|
|
|
|
# define SCALER_DISPBASEX_BASE_SHIFT 0
|
|
|
|
|
2015-03-03 05:01:12 +08:00
|
|
|
#define SCALER_DISPCTRL1 0x00000050
|
|
|
|
#define SCALER_DISPBKGND1 0x00000054
|
2016-02-17 02:24:08 +08:00
|
|
|
#define SCALER_DISPBKGNDX(x) (SCALER_DISPBKGND0 + \
|
|
|
|
(x) * (SCALER_DISPBKGND1 - \
|
|
|
|
SCALER_DISPBKGND0))
|
2015-03-03 05:01:12 +08:00
|
|
|
#define SCALER_DISPSTAT1 0x00000058
|
|
|
|
#define SCALER_DISPSTATX(x) (SCALER_DISPSTAT0 + \
|
|
|
|
(x) * (SCALER_DISPSTAT1 - \
|
|
|
|
SCALER_DISPSTAT0))
|
|
|
|
#define SCALER_DISPBASE1 0x0000005c
|
drm/vc4: Implement precise vblank timestamping.
Precise vblank timestamping is implemented via the
usual scanout position based method. On VC4 the
pixelvalves PV do not have a scanout position
register. Only the hardware video scaler HVS has a
similar register which describes which scanline for
the output is currently composited and stored in the
HVS fifo for later consumption by the PV.
This causes a problem in that the HVS runs at a much
faster clock (system clock / audio gate) than the PV
which runs at video mode dot clock, so the unless the
fifo between HVS and PV is full, the HVS will progress
faster in its observable read line position than video
scan rate, so the HVS position reading can't be directly
translated into a scanout position for timestamp correction.
Additionally when the PV is in vblank, it doesn't consume
from the fifo, so the fifo gets full very quickly and then
the HVS stops compositing until the PV enters active scanout
and starts consuming scanlines from the fifo again, making
new space for the HVS to composite.
Therefore a simple translation of HVS read position into
elapsed time since (or to) start of active scanout does
not work, but for the most interesting cases we can still
get useful and sufficiently accurate results:
1. The PV enters active scanout of a new frame with the
fifo of the HVS completely full, and the HVS can refill
any fifo line which gets consumed and thereby freed up by
the PV during active scanout very quickly. Therefore the
PV and HVS work effectively in lock-step during active
scanout with the fifo never having more than 1 scanline
freed up by the PV before it gets refilled. The PV's
real scanout position is therefore trailing the HVS
compositing position as scanoutpos = hvspos - fifosize
and we can get the true scanoutpos as HVS readpos minus
fifo size, so precise timestamping works while in active
scanout, except for the last few scanlines of the frame,
when the HVS reaches end of frame, stops compositing and
the PV catches up and drains the fifo. This special case
would only introduce minor errors though.
2. If we are in vblank, then we can only guess something
reasonable. If called from vblank irq, we assume the irq is
usually dispatched with minimum delay, so we can take a
timestamp taken at entry into the vblank irq handler as a
baseline and then add a full vblank duration until the
guessed start of active scanout. As irq dispatch is usually
pretty low latency this works with relatively low jitter and
good results.
If we aren't called from vblank then we could be anywhere
within the vblank interval, so we return a neutral result,
simply the current system timestamp, and hope for the best.
Measurement shows the generated timestamps to be rather precise,
and at least never off more than 1 vblank duration worst-case.
Limitations: Doesn't work well yet for interlaced video modes,
therefore disabled in interlaced mode for now.
v2: Use the DISPBASE registers to determine the FIFO size (changes
by anholt)
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-and-tested-by: Mario Kleiner <mario.kleiner.de@gmail.com> (v2)
2016-06-23 14:17:50 +08:00
|
|
|
#define SCALER_DISPBASEX(x) (SCALER_DISPBASE0 + \
|
|
|
|
(x) * (SCALER_DISPBASE1 - \
|
|
|
|
SCALER_DISPBASE0))
|
2015-03-03 05:01:12 +08:00
|
|
|
#define SCALER_DISPCTRL2 0x00000060
|
|
|
|
#define SCALER_DISPCTRLX(x) (SCALER_DISPCTRL0 + \
|
|
|
|
(x) * (SCALER_DISPCTRL1 - \
|
|
|
|
SCALER_DISPCTRL0))
|
|
|
|
#define SCALER_DISPBKGND2 0x00000064
|
|
|
|
#define SCALER_DISPSTAT2 0x00000068
|
|
|
|
#define SCALER_DISPBASE2 0x0000006c
|
|
|
|
#define SCALER_DISPALPHA2 0x00000070
|
|
|
|
#define SCALER_GAMADDR 0x00000078
|
2016-04-01 09:38:20 +08:00
|
|
|
# define SCALER_GAMADDR_AUTOINC BIT(31)
|
|
|
|
/* Enables all gamma ramp SRAMs, not just those of CRTCs with gamma
|
|
|
|
* enabled.
|
|
|
|
*/
|
|
|
|
# define SCALER_GAMADDR_SRAMENB BIT(30)
|
|
|
|
|
2015-03-03 05:01:12 +08:00
|
|
|
#define SCALER_GAMDATA 0x000000e0
|
|
|
|
#define SCALER_DLIST_START 0x00002000
|
|
|
|
#define SCALER_DLIST_SIZE 0x00004000
|
|
|
|
|
|
|
|
#define VC4_HDMI_CORE_REV 0x000
|
|
|
|
|
|
|
|
#define VC4_HDMI_SW_RESET_CONTROL 0x004
|
|
|
|
# define VC4_HDMI_SW_RESET_FORMAT_DETECT BIT(1)
|
|
|
|
# define VC4_HDMI_SW_RESET_HDMI BIT(0)
|
|
|
|
|
|
|
|
#define VC4_HDMI_HOTPLUG_INT 0x008
|
|
|
|
|
|
|
|
#define VC4_HDMI_HOTPLUG 0x00c
|
|
|
|
# define VC4_HDMI_HOTPLUG_CONNECTED BIT(0)
|
|
|
|
|
|
|
|
#define VC4_HDMI_RAM_PACKET_CONFIG 0x0a0
|
|
|
|
# define VC4_HDMI_RAM_PACKET_ENABLE BIT(16)
|
|
|
|
|
2016-09-30 06:34:43 +08:00
|
|
|
#define VC4_HDMI_RAM_PACKET_STATUS 0x0a4
|
|
|
|
|
2015-03-03 05:01:12 +08:00
|
|
|
#define VC4_HDMI_HORZA 0x0c4
|
|
|
|
# define VC4_HDMI_HORZA_VPOS BIT(14)
|
|
|
|
# define VC4_HDMI_HORZA_HPOS BIT(13)
|
|
|
|
/* Horizontal active pixels (hdisplay). */
|
|
|
|
# define VC4_HDMI_HORZA_HAP_MASK VC4_MASK(12, 0)
|
|
|
|
# define VC4_HDMI_HORZA_HAP_SHIFT 0
|
|
|
|
|
|
|
|
#define VC4_HDMI_HORZB 0x0c8
|
|
|
|
/* Horizontal pack porch (htotal - hsync_end). */
|
|
|
|
# define VC4_HDMI_HORZB_HBP_MASK VC4_MASK(29, 20)
|
|
|
|
# define VC4_HDMI_HORZB_HBP_SHIFT 20
|
|
|
|
/* Horizontal sync pulse (hsync_end - hsync_start). */
|
|
|
|
# define VC4_HDMI_HORZB_HSP_MASK VC4_MASK(19, 10)
|
|
|
|
# define VC4_HDMI_HORZB_HSP_SHIFT 10
|
|
|
|
/* Horizontal front porch (hsync_start - hdisplay). */
|
|
|
|
# define VC4_HDMI_HORZB_HFP_MASK VC4_MASK(9, 0)
|
|
|
|
# define VC4_HDMI_HORZB_HFP_SHIFT 0
|
|
|
|
|
|
|
|
#define VC4_HDMI_FIFO_CTL 0x05c
|
|
|
|
# define VC4_HDMI_FIFO_CTL_RECENTER_DONE BIT(14)
|
|
|
|
# define VC4_HDMI_FIFO_CTL_USE_EMPTY BIT(13)
|
|
|
|
# define VC4_HDMI_FIFO_CTL_ON_VB BIT(7)
|
|
|
|
# define VC4_HDMI_FIFO_CTL_RECENTER BIT(6)
|
|
|
|
# define VC4_HDMI_FIFO_CTL_FIFO_RESET BIT(5)
|
|
|
|
# define VC4_HDMI_FIFO_CTL_USE_PLL_LOCK BIT(4)
|
|
|
|
# define VC4_HDMI_FIFO_CTL_INV_CLK_XFR BIT(3)
|
|
|
|
# define VC4_HDMI_FIFO_CTL_CAPTURE_PTR BIT(2)
|
|
|
|
# define VC4_HDMI_FIFO_CTL_USE_FULL BIT(1)
|
|
|
|
# define VC4_HDMI_FIFO_CTL_MASTER_SLAVE_N BIT(0)
|
|
|
|
# define VC4_HDMI_FIFO_VALID_WRITE_MASK 0xefff
|
|
|
|
|
|
|
|
#define VC4_HDMI_SCHEDULER_CONTROL 0x0c0
|
|
|
|
# define VC4_HDMI_SCHEDULER_CONTROL_MANUAL_FORMAT BIT(15)
|
|
|
|
# define VC4_HDMI_SCHEDULER_CONTROL_IGNORE_VSYNC_PREDICTS BIT(5)
|
|
|
|
# define VC4_HDMI_SCHEDULER_CONTROL_VERT_ALWAYS_KEEPOUT BIT(3)
|
|
|
|
# define VC4_HDMI_SCHEDULER_CONTROL_HDMI_ACTIVE BIT(1)
|
|
|
|
# define VC4_HDMI_SCHEDULER_CONTROL_MODE_HDMI BIT(0)
|
|
|
|
|
|
|
|
#define VC4_HDMI_VERTA0 0x0cc
|
|
|
|
#define VC4_HDMI_VERTA1 0x0d4
|
|
|
|
/* Vertical sync pulse (vsync_end - vsync_start). */
|
|
|
|
# define VC4_HDMI_VERTA_VSP_MASK VC4_MASK(24, 20)
|
|
|
|
# define VC4_HDMI_VERTA_VSP_SHIFT 20
|
|
|
|
/* Vertical front porch (vsync_start - vdisplay). */
|
|
|
|
# define VC4_HDMI_VERTA_VFP_MASK VC4_MASK(19, 13)
|
|
|
|
# define VC4_HDMI_VERTA_VFP_SHIFT 13
|
|
|
|
/* Vertical active lines (vdisplay). */
|
|
|
|
# define VC4_HDMI_VERTA_VAL_MASK VC4_MASK(12, 0)
|
|
|
|
# define VC4_HDMI_VERTA_VAL_SHIFT 0
|
|
|
|
|
|
|
|
#define VC4_HDMI_VERTB0 0x0d0
|
|
|
|
#define VC4_HDMI_VERTB1 0x0d8
|
|
|
|
/* Vertical sync pulse offset (for interlaced) */
|
|
|
|
# define VC4_HDMI_VERTB_VSPO_MASK VC4_MASK(21, 9)
|
|
|
|
# define VC4_HDMI_VERTB_VSPO_SHIFT 9
|
|
|
|
/* Vertical pack porch (vtotal - vsync_end). */
|
|
|
|
# define VC4_HDMI_VERTB_VBP_MASK VC4_MASK(8, 0)
|
|
|
|
# define VC4_HDMI_VERTB_VBP_SHIFT 0
|
|
|
|
|
|
|
|
#define VC4_HDMI_TX_PHY_RESET_CTL 0x2c0
|
|
|
|
|
2016-09-30 06:34:43 +08:00
|
|
|
#define VC4_HDMI_GCP_0 0x400
|
|
|
|
#define VC4_HDMI_PACKET_STRIDE 0x24
|
|
|
|
|
2015-03-03 05:01:12 +08:00
|
|
|
#define VC4_HD_M_CTL 0x00c
|
2016-02-13 06:15:14 +08:00
|
|
|
# define VC4_HD_M_REGISTER_FILE_STANDBY (3 << 6)
|
|
|
|
# define VC4_HD_M_RAM_STANDBY (3 << 4)
|
2015-03-03 05:01:12 +08:00
|
|
|
# define VC4_HD_M_SW_RST BIT(2)
|
|
|
|
# define VC4_HD_M_ENABLE BIT(0)
|
|
|
|
|
|
|
|
#define VC4_HD_MAI_CTL 0x014
|
|
|
|
|
|
|
|
#define VC4_HD_VID_CTL 0x038
|
|
|
|
# define VC4_HD_VID_CTL_ENABLE BIT(31)
|
|
|
|
# define VC4_HD_VID_CTL_UNDERFLOW_ENABLE BIT(30)
|
|
|
|
# define VC4_HD_VID_CTL_FRAME_COUNTER_RESET BIT(29)
|
|
|
|
# define VC4_HD_VID_CTL_VSYNC_LOW BIT(28)
|
|
|
|
# define VC4_HD_VID_CTL_HSYNC_LOW BIT(27)
|
|
|
|
|
|
|
|
#define VC4_HD_CSC_CTL 0x040
|
|
|
|
# define VC4_HD_CSC_CTL_ORDER_MASK VC4_MASK(7, 5)
|
|
|
|
# define VC4_HD_CSC_CTL_ORDER_SHIFT 5
|
|
|
|
# define VC4_HD_CSC_CTL_ORDER_RGB 0
|
|
|
|
# define VC4_HD_CSC_CTL_ORDER_BGR 1
|
|
|
|
# define VC4_HD_CSC_CTL_ORDER_BRG 2
|
|
|
|
# define VC4_HD_CSC_CTL_ORDER_GRB 3
|
|
|
|
# define VC4_HD_CSC_CTL_ORDER_GBR 4
|
|
|
|
# define VC4_HD_CSC_CTL_ORDER_RBG 5
|
|
|
|
# define VC4_HD_CSC_CTL_PADMSB BIT(4)
|
|
|
|
# define VC4_HD_CSC_CTL_MODE_MASK VC4_MASK(3, 2)
|
|
|
|
# define VC4_HD_CSC_CTL_MODE_SHIFT 2
|
|
|
|
# define VC4_HD_CSC_CTL_MODE_RGB_TO_SD_YPRPB 0
|
|
|
|
# define VC4_HD_CSC_CTL_MODE_RGB_TO_HD_YPRPB 1
|
2016-09-16 17:59:45 +08:00
|
|
|
# define VC4_HD_CSC_CTL_MODE_CUSTOM 3
|
2015-03-03 05:01:12 +08:00
|
|
|
# define VC4_HD_CSC_CTL_RGB2YCC BIT(1)
|
|
|
|
# define VC4_HD_CSC_CTL_ENABLE BIT(0)
|
|
|
|
|
2016-09-16 17:59:45 +08:00
|
|
|
#define VC4_HD_CSC_12_11 0x044
|
|
|
|
#define VC4_HD_CSC_14_13 0x048
|
|
|
|
#define VC4_HD_CSC_22_21 0x04c
|
|
|
|
#define VC4_HD_CSC_24_23 0x050
|
|
|
|
#define VC4_HD_CSC_32_31 0x054
|
|
|
|
#define VC4_HD_CSC_34_33 0x058
|
|
|
|
|
2015-03-03 05:01:12 +08:00
|
|
|
#define VC4_HD_FRAME_COUNT 0x068
|
|
|
|
|
|
|
|
/* HVS display list information. */
|
|
|
|
#define HVS_BOOTLOADER_DLIST_END 32
|
|
|
|
|
|
|
|
enum hvs_pixel_format {
|
|
|
|
/* 8bpp */
|
|
|
|
HVS_PIXEL_FORMAT_RGB332 = 0,
|
|
|
|
/* 16bpp */
|
|
|
|
HVS_PIXEL_FORMAT_RGBA4444 = 1,
|
|
|
|
HVS_PIXEL_FORMAT_RGB555 = 2,
|
|
|
|
HVS_PIXEL_FORMAT_RGBA5551 = 3,
|
|
|
|
HVS_PIXEL_FORMAT_RGB565 = 4,
|
|
|
|
/* 24bpp */
|
|
|
|
HVS_PIXEL_FORMAT_RGB888 = 5,
|
|
|
|
HVS_PIXEL_FORMAT_RGBA6666 = 6,
|
|
|
|
/* 32bpp */
|
2015-12-31 04:25:44 +08:00
|
|
|
HVS_PIXEL_FORMAT_RGBA8888 = 7,
|
|
|
|
|
|
|
|
HVS_PIXEL_FORMAT_YCBCR_YUV420_3PLANE = 8,
|
|
|
|
HVS_PIXEL_FORMAT_YCBCR_YUV420_2PLANE = 9,
|
|
|
|
HVS_PIXEL_FORMAT_YCBCR_YUV422_3PLANE = 10,
|
|
|
|
HVS_PIXEL_FORMAT_YCBCR_YUV422_2PLANE = 11,
|
2015-03-03 05:01:12 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
/* Note: the LSB is the rightmost character shown. Only valid for
|
|
|
|
* HVS_PIXEL_FORMAT_RGB8888, not RGB888.
|
|
|
|
*/
|
|
|
|
#define HVS_PIXEL_ORDER_RGBA 0
|
|
|
|
#define HVS_PIXEL_ORDER_BGRA 1
|
|
|
|
#define HVS_PIXEL_ORDER_ARGB 2
|
|
|
|
#define HVS_PIXEL_ORDER_ABGR 3
|
|
|
|
|
|
|
|
#define HVS_PIXEL_ORDER_XBRG 0
|
|
|
|
#define HVS_PIXEL_ORDER_XRBG 1
|
|
|
|
#define HVS_PIXEL_ORDER_XRGB 2
|
|
|
|
#define HVS_PIXEL_ORDER_XBGR 3
|
|
|
|
|
|
|
|
#define HVS_PIXEL_ORDER_XYCBCR 0
|
|
|
|
#define HVS_PIXEL_ORDER_XYCRCB 1
|
|
|
|
#define HVS_PIXEL_ORDER_YXCBCR 2
|
|
|
|
#define HVS_PIXEL_ORDER_YXCRCB 3
|
|
|
|
|
|
|
|
#define SCALER_CTL0_END BIT(31)
|
|
|
|
#define SCALER_CTL0_VALID BIT(30)
|
|
|
|
|
|
|
|
#define SCALER_CTL0_SIZE_MASK VC4_MASK(29, 24)
|
|
|
|
#define SCALER_CTL0_SIZE_SHIFT 24
|
|
|
|
|
|
|
|
#define SCALER_CTL0_HFLIP BIT(16)
|
|
|
|
#define SCALER_CTL0_VFLIP BIT(15)
|
|
|
|
|
|
|
|
#define SCALER_CTL0_ORDER_MASK VC4_MASK(14, 13)
|
|
|
|
#define SCALER_CTL0_ORDER_SHIFT 13
|
|
|
|
|
2015-10-20 23:06:57 +08:00
|
|
|
#define SCALER_CTL0_SCL1_MASK VC4_MASK(10, 8)
|
|
|
|
#define SCALER_CTL0_SCL1_SHIFT 8
|
|
|
|
|
|
|
|
#define SCALER_CTL0_SCL0_MASK VC4_MASK(7, 5)
|
|
|
|
#define SCALER_CTL0_SCL0_SHIFT 5
|
|
|
|
|
|
|
|
#define SCALER_CTL0_SCL_H_PPF_V_PPF 0
|
|
|
|
#define SCALER_CTL0_SCL_H_TPZ_V_PPF 1
|
|
|
|
#define SCALER_CTL0_SCL_H_PPF_V_TPZ 2
|
|
|
|
#define SCALER_CTL0_SCL_H_TPZ_V_TPZ 3
|
|
|
|
#define SCALER_CTL0_SCL_H_PPF_V_NONE 4
|
|
|
|
#define SCALER_CTL0_SCL_H_NONE_V_PPF 5
|
|
|
|
#define SCALER_CTL0_SCL_H_NONE_V_TPZ 6
|
|
|
|
#define SCALER_CTL0_SCL_H_TPZ_V_NONE 7
|
|
|
|
|
2015-03-03 05:01:12 +08:00
|
|
|
/* Set to indicate no scaling. */
|
|
|
|
#define SCALER_CTL0_UNITY BIT(4)
|
|
|
|
|
|
|
|
#define SCALER_CTL0_PIXEL_FORMAT_MASK VC4_MASK(3, 0)
|
|
|
|
#define SCALER_CTL0_PIXEL_FORMAT_SHIFT 0
|
|
|
|
|
|
|
|
#define SCALER_POS0_FIXED_ALPHA_MASK VC4_MASK(31, 24)
|
|
|
|
#define SCALER_POS0_FIXED_ALPHA_SHIFT 24
|
|
|
|
|
|
|
|
#define SCALER_POS0_START_Y_MASK VC4_MASK(23, 12)
|
|
|
|
#define SCALER_POS0_START_Y_SHIFT 12
|
|
|
|
|
|
|
|
#define SCALER_POS0_START_X_MASK VC4_MASK(11, 0)
|
|
|
|
#define SCALER_POS0_START_X_SHIFT 0
|
|
|
|
|
2015-10-20 23:06:57 +08:00
|
|
|
#define SCALER_POS1_SCL_HEIGHT_MASK VC4_MASK(27, 16)
|
|
|
|
#define SCALER_POS1_SCL_HEIGHT_SHIFT 16
|
|
|
|
|
|
|
|
#define SCALER_POS1_SCL_WIDTH_MASK VC4_MASK(11, 0)
|
|
|
|
#define SCALER_POS1_SCL_WIDTH_SHIFT 0
|
|
|
|
|
2015-03-03 05:01:12 +08:00
|
|
|
#define SCALER_POS2_ALPHA_MODE_MASK VC4_MASK(31, 30)
|
|
|
|
#define SCALER_POS2_ALPHA_MODE_SHIFT 30
|
|
|
|
#define SCALER_POS2_ALPHA_MODE_PIPELINE 0
|
|
|
|
#define SCALER_POS2_ALPHA_MODE_FIXED 1
|
|
|
|
#define SCALER_POS2_ALPHA_MODE_FIXED_NONZERO 2
|
|
|
|
#define SCALER_POS2_ALPHA_MODE_FIXED_OVER_0x07 3
|
|
|
|
|
|
|
|
#define SCALER_POS2_HEIGHT_MASK VC4_MASK(27, 16)
|
|
|
|
#define SCALER_POS2_HEIGHT_SHIFT 16
|
|
|
|
|
|
|
|
#define SCALER_POS2_WIDTH_MASK VC4_MASK(11, 0)
|
|
|
|
#define SCALER_POS2_WIDTH_SHIFT 0
|
|
|
|
|
2015-12-31 04:25:44 +08:00
|
|
|
/* Color Space Conversion words. Some values are S2.8 signed
|
|
|
|
* integers, except that the 2 integer bits map as {0x0: 0, 0x1: 1,
|
|
|
|
* 0x2: 2, 0x3: -1}
|
|
|
|
*/
|
|
|
|
/* bottom 8 bits of S2.8 contribution of Cr to Blue */
|
|
|
|
#define SCALER_CSC0_COEF_CR_BLU_MASK VC4_MASK(31, 24)
|
|
|
|
#define SCALER_CSC0_COEF_CR_BLU_SHIFT 24
|
|
|
|
/* Signed offset to apply to Y before CSC. (Y' = Y + YY_OFS) */
|
|
|
|
#define SCALER_CSC0_COEF_YY_OFS_MASK VC4_MASK(23, 16)
|
|
|
|
#define SCALER_CSC0_COEF_YY_OFS_SHIFT 16
|
|
|
|
/* Signed offset to apply to CB before CSC (Cb' = Cb - 128 + CB_OFS). */
|
|
|
|
#define SCALER_CSC0_COEF_CB_OFS_MASK VC4_MASK(15, 8)
|
|
|
|
#define SCALER_CSC0_COEF_CB_OFS_SHIFT 8
|
|
|
|
/* Signed offset to apply to CB before CSC (Cr' = Cr - 128 + CR_OFS). */
|
|
|
|
#define SCALER_CSC0_COEF_CR_OFS_MASK VC4_MASK(7, 0)
|
|
|
|
#define SCALER_CSC0_COEF_CR_OFS_SHIFT 0
|
|
|
|
#define SCALER_CSC0_ITR_R_601_5 0x00f00000
|
|
|
|
#define SCALER_CSC0_ITR_R_709_3 0x00f00000
|
|
|
|
#define SCALER_CSC0_JPEG_JFIF 0x00000000
|
|
|
|
|
|
|
|
/* S2.8 contribution of Cb to Green */
|
|
|
|
#define SCALER_CSC1_COEF_CB_GRN_MASK VC4_MASK(31, 22)
|
|
|
|
#define SCALER_CSC1_COEF_CB_GRN_SHIFT 22
|
|
|
|
/* S2.8 contribution of Cr to Green */
|
|
|
|
#define SCALER_CSC1_COEF_CR_GRN_MASK VC4_MASK(21, 12)
|
|
|
|
#define SCALER_CSC1_COEF_CR_GRN_SHIFT 12
|
|
|
|
/* S2.8 contribution of Y to all of RGB */
|
|
|
|
#define SCALER_CSC1_COEF_YY_ALL_MASK VC4_MASK(11, 2)
|
|
|
|
#define SCALER_CSC1_COEF_YY_ALL_SHIFT 2
|
|
|
|
/* top 2 bits of S2.8 contribution of Cr to Blue */
|
|
|
|
#define SCALER_CSC1_COEF_CR_BLU_MASK VC4_MASK(1, 0)
|
|
|
|
#define SCALER_CSC1_COEF_CR_BLU_SHIFT 0
|
|
|
|
#define SCALER_CSC1_ITR_R_601_5 0xe73304a8
|
|
|
|
#define SCALER_CSC1_ITR_R_709_3 0xf2b784a8
|
|
|
|
#define SCALER_CSC1_JPEG_JFIF 0xea34a400
|
|
|
|
|
|
|
|
/* S2.8 contribution of Cb to Red */
|
|
|
|
#define SCALER_CSC2_COEF_CB_RED_MASK VC4_MASK(29, 20)
|
|
|
|
#define SCALER_CSC2_COEF_CB_RED_SHIFT 20
|
|
|
|
/* S2.8 contribution of Cr to Red */
|
|
|
|
#define SCALER_CSC2_COEF_CR_RED_MASK VC4_MASK(19, 10)
|
|
|
|
#define SCALER_CSC2_COEF_CR_RED_SHIFT 10
|
|
|
|
/* S2.8 contribution of Cb to Blue */
|
|
|
|
#define SCALER_CSC2_COEF_CB_BLU_MASK VC4_MASK(19, 10)
|
|
|
|
#define SCALER_CSC2_COEF_CB_BLU_SHIFT 10
|
|
|
|
#define SCALER_CSC2_ITR_R_601_5 0x00066204
|
|
|
|
#define SCALER_CSC2_ITR_R_709_3 0x00072a1c
|
|
|
|
#define SCALER_CSC2_JPEG_JFIF 0x000599c5
|
|
|
|
|
2015-10-20 23:06:57 +08:00
|
|
|
#define SCALER_TPZ0_VERT_RECALC BIT(31)
|
|
|
|
#define SCALER_TPZ0_SCALE_MASK VC4_MASK(28, 8)
|
|
|
|
#define SCALER_TPZ0_SCALE_SHIFT 8
|
|
|
|
#define SCALER_TPZ0_IPHASE_MASK VC4_MASK(7, 0)
|
|
|
|
#define SCALER_TPZ0_IPHASE_SHIFT 0
|
|
|
|
#define SCALER_TPZ1_RECIP_MASK VC4_MASK(15, 0)
|
|
|
|
#define SCALER_TPZ1_RECIP_SHIFT 0
|
|
|
|
|
|
|
|
/* Skips interpolating coefficients to 64 phases, so just 8 are used.
|
|
|
|
* Required for nearest neighbor.
|
|
|
|
*/
|
|
|
|
#define SCALER_PPF_NOINTERP BIT(31)
|
|
|
|
/* Replaes the highest valued coefficient with one that makes all 4
|
|
|
|
* sum to unity.
|
|
|
|
*/
|
|
|
|
#define SCALER_PPF_AGC BIT(30)
|
|
|
|
#define SCALER_PPF_SCALE_MASK VC4_MASK(24, 8)
|
|
|
|
#define SCALER_PPF_SCALE_SHIFT 8
|
|
|
|
#define SCALER_PPF_IPHASE_MASK VC4_MASK(6, 0)
|
|
|
|
#define SCALER_PPF_IPHASE_SHIFT 0
|
|
|
|
|
|
|
|
#define SCALER_PPF_KERNEL_OFFSET_MASK VC4_MASK(13, 0)
|
|
|
|
#define SCALER_PPF_KERNEL_OFFSET_SHIFT 0
|
|
|
|
#define SCALER_PPF_KERNEL_UNCACHED BIT(31)
|
|
|
|
|
2015-03-03 05:01:12 +08:00
|
|
|
#define SCALER_SRC_PITCH_MASK VC4_MASK(15, 0)
|
|
|
|
#define SCALER_SRC_PITCH_SHIFT 0
|
|
|
|
|
|
|
|
#endif /* VC4_REGS_H */
|