UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/arch/arm/configs/ixp4xx_defconfig

176 lines
3.7 KiB
Plaintext
Raw Normal View History

ARM: config: Refresh IXP4xx config after multiplatform After converting to multiplatform the old IXP4xx defconfig doesn't even activate the ethernet driver anymore, we need to refresh this thoroughly. - Drop options that ARCH_MULTI_V5 selects for us. - Some options moved around because of multiplatform and because generic Kconfig movements. - Drop all MACH_* that do not exist anymore. - Compress the kernel and initramfs with XZ as the memory is often limited for these machines. - Make sure IXP4XX_QMGR and IXP4XX_NPE is selected. - Make sure the MTD_PHYSMAP_IXP4XX is selected and not the old MTD_IXP4XX (will be deleted). - Activate CRYPTO_DEV_IXP4XX - Add some very basic default drivers such as AT24 EEPROMs used in many routers. - Add some kernel configs needed to bring up OpenWrt which is the only userspace for these devices: CGROUPS, DEVTMPFS, INOTIFY_USER, SIGNALFD, TIMERFD, EPOLL, OVERLAY_FS and SQUASHFS. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Arnd Bergmann <arnd@kernel.org> Cc: Krzysztof Halasa <khalasa@piap.pl> Cc: Imre Kaloz <kaloz@openwrt.org> Link: https://lore.kernel.org/r/20220407204502.2470560-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-08 04:45:02 +08:00
CONFIG_KERNEL_XZ=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-29 07:17:24 +08:00
CONFIG_LOG_BUF_SHIFT=14
ARM: config: Refresh IXP4xx config after multiplatform After converting to multiplatform the old IXP4xx defconfig doesn't even activate the ethernet driver anymore, we need to refresh this thoroughly. - Drop options that ARCH_MULTI_V5 selects for us. - Some options moved around because of multiplatform and because generic Kconfig movements. - Drop all MACH_* that do not exist anymore. - Compress the kernel and initramfs with XZ as the memory is often limited for these machines. - Make sure IXP4XX_QMGR and IXP4XX_NPE is selected. - Make sure the MTD_PHYSMAP_IXP4XX is selected and not the old MTD_IXP4XX (will be deleted). - Activate CRYPTO_DEV_IXP4XX - Add some very basic default drivers such as AT24 EEPROMs used in many routers. - Add some kernel configs needed to bring up OpenWrt which is the only userspace for these devices: CGROUPS, DEVTMPFS, INOTIFY_USER, SIGNALFD, TIMERFD, EPOLL, OVERLAY_FS and SQUASHFS. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Arnd Bergmann <arnd@kernel.org> Cc: Krzysztof Halasa <khalasa@piap.pl> Cc: Imre Kaloz <kaloz@openwrt.org> Link: https://lore.kernel.org/r/20220407204502.2470560-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-08 04:45:02 +08:00
CONFIG_CGROUPS=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-29 07:17:24 +08:00
CONFIG_BLK_DEV_INITRD=y
ARM: config: Refresh IXP4xx config after multiplatform After converting to multiplatform the old IXP4xx defconfig doesn't even activate the ethernet driver anymore, we need to refresh this thoroughly. - Drop options that ARCH_MULTI_V5 selects for us. - Some options moved around because of multiplatform and because generic Kconfig movements. - Drop all MACH_* that do not exist anymore. - Compress the kernel and initramfs with XZ as the memory is often limited for these machines. - Make sure IXP4XX_QMGR and IXP4XX_NPE is selected. - Make sure the MTD_PHYSMAP_IXP4XX is selected and not the old MTD_IXP4XX (will be deleted). - Activate CRYPTO_DEV_IXP4XX - Add some very basic default drivers such as AT24 EEPROMs used in many routers. - Add some kernel configs needed to bring up OpenWrt which is the only userspace for these devices: CGROUPS, DEVTMPFS, INOTIFY_USER, SIGNALFD, TIMERFD, EPOLL, OVERLAY_FS and SQUASHFS. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Arnd Bergmann <arnd@kernel.org> Cc: Krzysztof Halasa <khalasa@piap.pl> Cc: Imre Kaloz <kaloz@openwrt.org> Link: https://lore.kernel.org/r/20220407204502.2470560-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-08 04:45:02 +08:00
CONFIG_INITRAMFS_COMPRESSION_XZ=y
kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: David Woodhouse <david.woodhouse@intel.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-21 06:44:16 +08:00
CONFIG_EXPERT=y
ARM: ixp4xx: enable multiplatform support After all the work that Linus Walleij did on this platform, it can be part of a generic kernel build as well. Note that there are known bugs in little-endian mode on ixp4xx, and no other ARMv5 platform at this point supports big-endian mode, or is likely to in the future, so there is limited practical value in this, but it helps with build testing and ixp4xx little-endian support may get fixed in the future. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-02 22:52:55 +08:00
# CONFIG_ARCH_MULTI_V7 is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-29 07:17:24 +08:00
CONFIG_ARCH_IXP4XX=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
CONFIG_CPU_BIG_ENDIAN=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-29 07:17:24 +08:00
CONFIG_AEABI=y
ARM: config: Refresh IXP4xx config after multiplatform After converting to multiplatform the old IXP4xx defconfig doesn't even activate the ethernet driver anymore, we need to refresh this thoroughly. - Drop options that ARCH_MULTI_V5 selects for us. - Some options moved around because of multiplatform and because generic Kconfig movements. - Drop all MACH_* that do not exist anymore. - Compress the kernel and initramfs with XZ as the memory is often limited for these machines. - Make sure IXP4XX_QMGR and IXP4XX_NPE is selected. - Make sure the MTD_PHYSMAP_IXP4XX is selected and not the old MTD_IXP4XX (will be deleted). - Activate CRYPTO_DEV_IXP4XX - Add some very basic default drivers such as AT24 EEPROMs used in many routers. - Add some kernel configs needed to bring up OpenWrt which is the only userspace for these devices: CGROUPS, DEVTMPFS, INOTIFY_USER, SIGNALFD, TIMERFD, EPOLL, OVERLAY_FS and SQUASHFS. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Arnd Bergmann <arnd@kernel.org> Cc: Krzysztof Halasa <khalasa@piap.pl> Cc: Imre Kaloz <kaloz@openwrt.org> Link: https://lore.kernel.org/r/20220407204502.2470560-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-08 04:45:02 +08:00
CONFIG_CMDLINE="console=ttyS0,115200"
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_PARTITION_ADVANCED=y
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-27 02:52:57 +08:00
CONFIG_NET=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-29 07:17:24 +08:00
CONFIG_PACKET=y
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-27 02:52:57 +08:00
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
ARM: reduce defconfigs Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-10 13:12:18 +08:00
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-27 02:52:57 +08:00
CONFIG_IP_VS=m
CONFIG_IP_VS_DEBUG=y
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_ATALK=m
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-29 07:17:24 +08:00
CONFIG_DEV_APPLETALK=m
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-27 02:52:57 +08:00
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_X25=m
CONFIG_LAPB=m
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-29 07:17:24 +08:00
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
[ARM] 2936/1: ixp4xx default config fixes Patch from Vincent Sanders A recent patch which made IXP4xx mach_desc's depend on config options had the effect of not building the kernel for several machines it possibly could be, this patch updates the default config to ensure all possible machines are built for by default. Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-27 02:52:57 +08:00
CONFIG_NET_PKTGEN=m
ARM: config: Refresh IXP4xx config after multiplatform After converting to multiplatform the old IXP4xx defconfig doesn't even activate the ethernet driver anymore, we need to refresh this thoroughly. - Drop options that ARCH_MULTI_V5 selects for us. - Some options moved around because of multiplatform and because generic Kconfig movements. - Drop all MACH_* that do not exist anymore. - Compress the kernel and initramfs with XZ as the memory is often limited for these machines. - Make sure IXP4XX_QMGR and IXP4XX_NPE is selected. - Make sure the MTD_PHYSMAP_IXP4XX is selected and not the old MTD_IXP4XX (will be deleted). - Activate CRYPTO_DEV_IXP4XX - Add some very basic default drivers such as AT24 EEPROMs used in many routers. - Add some kernel configs needed to bring up OpenWrt which is the only userspace for these devices: CGROUPS, DEVTMPFS, INOTIFY_USER, SIGNALFD, TIMERFD, EPOLL, OVERLAY_FS and SQUASHFS. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Arnd Bergmann <arnd@kernel.org> Cc: Krzysztof Halasa <khalasa@piap.pl> Cc: Imre Kaloz <kaloz@openwrt.org> Link: https://lore.kernel.org/r/20220407204502.2470560-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-08 04:45:02 +08:00
CONFIG_DEVTMPFS=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
CONFIG_MTD=y
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
ARM: config: Refresh IXP4xx config after multiplatform After converting to multiplatform the old IXP4xx defconfig doesn't even activate the ethernet driver anymore, we need to refresh this thoroughly. - Drop options that ARCH_MULTI_V5 selects for us. - Some options moved around because of multiplatform and because generic Kconfig movements. - Drop all MACH_* that do not exist anymore. - Compress the kernel and initramfs with XZ as the memory is often limited for these machines. - Make sure IXP4XX_QMGR and IXP4XX_NPE is selected. - Make sure the MTD_PHYSMAP_IXP4XX is selected and not the old MTD_IXP4XX (will be deleted). - Activate CRYPTO_DEV_IXP4XX - Add some very basic default drivers such as AT24 EEPROMs used in many routers. - Add some kernel configs needed to bring up OpenWrt which is the only userspace for these devices: CGROUPS, DEVTMPFS, INOTIFY_USER, SIGNALFD, TIMERFD, EPOLL, OVERLAY_FS and SQUASHFS. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Arnd Bergmann <arnd@kernel.org> Cc: Krzysztof Halasa <khalasa@piap.pl> Cc: Imre Kaloz <kaloz@openwrt.org> Link: https://lore.kernel.org/r/20220407204502.2470560-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-08 04:45:02 +08:00
CONFIG_MTD_COMPLEX_MAPPINGS=y
ARM: ixp4xx_defconfig: add MTD_PHYSMAP Without MTD_PHYSMAP/MTD_PHYSMAP_OF the flash partitions of my welltech,epbx100 are not detected. Link: https://lore.kernel.org/r/20210504193457.4008384-3-clabbe@baylibre.com Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2021-05-05 03:34:54 +08:00
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_OF=y
ARM: config: Refresh IXP4xx config after multiplatform After converting to multiplatform the old IXP4xx defconfig doesn't even activate the ethernet driver anymore, we need to refresh this thoroughly. - Drop options that ARCH_MULTI_V5 selects for us. - Some options moved around because of multiplatform and because generic Kconfig movements. - Drop all MACH_* that do not exist anymore. - Compress the kernel and initramfs with XZ as the memory is often limited for these machines. - Make sure IXP4XX_QMGR and IXP4XX_NPE is selected. - Make sure the MTD_PHYSMAP_IXP4XX is selected and not the old MTD_IXP4XX (will be deleted). - Activate CRYPTO_DEV_IXP4XX - Add some very basic default drivers such as AT24 EEPROMs used in many routers. - Add some kernel configs needed to bring up OpenWrt which is the only userspace for these devices: CGROUPS, DEVTMPFS, INOTIFY_USER, SIGNALFD, TIMERFD, EPOLL, OVERLAY_FS and SQUASHFS. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Arnd Bergmann <arnd@kernel.org> Cc: Krzysztof Halasa <khalasa@piap.pl> Cc: Imre Kaloz <kaloz@openwrt.org> Link: https://lore.kernel.org/r/20220407204502.2470560-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-08 04:45:02 +08:00
CONFIG_MTD_PHYSMAP_IXP4XX=y
mtd: rawnand: Clarify Kconfig entry MTD_NAND MTD_NAND is large and encloses much more than what the symbol is actually used for: raw NAND. Clarify the symbol by naming it MTD_RAW_NAND instead. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-02-06 23:47:44 +08:00
CONFIG_MTD_RAW_NAND=m
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
ARM: config: Refresh IXP4xx config after multiplatform After converting to multiplatform the old IXP4xx defconfig doesn't even activate the ethernet driver anymore, we need to refresh this thoroughly. - Drop options that ARCH_MULTI_V5 selects for us. - Some options moved around because of multiplatform and because generic Kconfig movements. - Drop all MACH_* that do not exist anymore. - Compress the kernel and initramfs with XZ as the memory is often limited for these machines. - Make sure IXP4XX_QMGR and IXP4XX_NPE is selected. - Make sure the MTD_PHYSMAP_IXP4XX is selected and not the old MTD_IXP4XX (will be deleted). - Activate CRYPTO_DEV_IXP4XX - Add some very basic default drivers such as AT24 EEPROMs used in many routers. - Add some kernel configs needed to bring up OpenWrt which is the only userspace for these devices: CGROUPS, DEVTMPFS, INOTIFY_USER, SIGNALFD, TIMERFD, EPOLL, OVERLAY_FS and SQUASHFS. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Arnd Bergmann <arnd@kernel.org> Cc: Krzysztof Halasa <khalasa@piap.pl> Cc: Imre Kaloz <kaloz@openwrt.org> Link: https://lore.kernel.org/r/20220407204502.2470560-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-08 04:45:02 +08:00
CONFIG_EEPROM_AT24=y
ARM: config: ixp4xx: Disable legacy EEPROM driver This disables the legacy EEPROM driver, we only need the new AT24 driver. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220911214042.1857352-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-09-12 05:40:42 +08:00
# CONFIG_EEPROM_LEGACY is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-29 07:17:24 +08:00
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
ARM: config: Refresh IXP4xx config after multiplatform After converting to multiplatform the old IXP4xx defconfig doesn't even activate the ethernet driver anymore, we need to refresh this thoroughly. - Drop options that ARCH_MULTI_V5 selects for us. - Some options moved around because of multiplatform and because generic Kconfig movements. - Drop all MACH_* that do not exist anymore. - Compress the kernel and initramfs with XZ as the memory is often limited for these machines. - Make sure IXP4XX_QMGR and IXP4XX_NPE is selected. - Make sure the MTD_PHYSMAP_IXP4XX is selected and not the old MTD_IXP4XX (will be deleted). - Activate CRYPTO_DEV_IXP4XX - Add some very basic default drivers such as AT24 EEPROMs used in many routers. - Add some kernel configs needed to bring up OpenWrt which is the only userspace for these devices: CGROUPS, DEVTMPFS, INOTIFY_USER, SIGNALFD, TIMERFD, EPOLL, OVERLAY_FS and SQUASHFS. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Arnd Bergmann <arnd@kernel.org> Cc: Krzysztof Halasa <khalasa@piap.pl> Cc: Imre Kaloz <kaloz@openwrt.org> Link: https://lore.kernel.org/r/20220407204502.2470560-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-08 04:45:02 +08:00
# CONFIG_BLK_DEV_BSG is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-29 07:17:24 +08:00
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_ATA=y
CONFIG_PATA_IXP4XX_CF=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
ARM: config: Refresh IXP4xx config after multiplatform After converting to multiplatform the old IXP4xx defconfig doesn't even activate the ethernet driver anymore, we need to refresh this thoroughly. - Drop options that ARCH_MULTI_V5 selects for us. - Some options moved around because of multiplatform and because generic Kconfig movements. - Drop all MACH_* that do not exist anymore. - Compress the kernel and initramfs with XZ as the memory is often limited for these machines. - Make sure IXP4XX_QMGR and IXP4XX_NPE is selected. - Make sure the MTD_PHYSMAP_IXP4XX is selected and not the old MTD_IXP4XX (will be deleted). - Activate CRYPTO_DEV_IXP4XX - Add some very basic default drivers such as AT24 EEPROMs used in many routers. - Add some kernel configs needed to bring up OpenWrt which is the only userspace for these devices: CGROUPS, DEVTMPFS, INOTIFY_USER, SIGNALFD, TIMERFD, EPOLL, OVERLAY_FS and SQUASHFS. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Arnd Bergmann <arnd@kernel.org> Cc: Krzysztof Halasa <khalasa@piap.pl> Cc: Imre Kaloz <kaloz@openwrt.org> Link: https://lore.kernel.org/r/20220407204502.2470560-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-08 04:45:02 +08:00
CONFIG_ATM_TCP=m
[ARM] 4806/1: ixp4xx: Ethernet support for the nslu2 and nas100d boards Enables the new ixp4xx qmgr and npe drivers in ixp4xx_defconfig. Sets up the corresponding platform data for the nslu2 and nas100d boards, and reads the ethernet MAC address from the internal flash. Tested on both little-endian and big-endian kernels. Tested-by: Tom King <tom@websb.net> Signed-off-by: Rod Whitby <rod@whitby.id.au> Signed-off-by: Michael Westerhof <mwester@dls.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-02 07:04:05 +08:00
CONFIG_IXP4XX_ETH=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
CONFIG_WAN=y
ARM: config: Refresh IXP4xx config after multiplatform After converting to multiplatform the old IXP4xx defconfig doesn't even activate the ethernet driver anymore, we need to refresh this thoroughly. - Drop options that ARCH_MULTI_V5 selects for us. - Some options moved around because of multiplatform and because generic Kconfig movements. - Drop all MACH_* that do not exist anymore. - Compress the kernel and initramfs with XZ as the memory is often limited for these machines. - Make sure IXP4XX_QMGR and IXP4XX_NPE is selected. - Make sure the MTD_PHYSMAP_IXP4XX is selected and not the old MTD_IXP4XX (will be deleted). - Activate CRYPTO_DEV_IXP4XX - Add some very basic default drivers such as AT24 EEPROMs used in many routers. - Add some kernel configs needed to bring up OpenWrt which is the only userspace for these devices: CGROUPS, DEVTMPFS, INOTIFY_USER, SIGNALFD, TIMERFD, EPOLL, OVERLAY_FS and SQUASHFS. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Arnd Bergmann <arnd@kernel.org> Cc: Krzysztof Halasa <khalasa@piap.pl> Cc: Imre Kaloz <kaloz@openwrt.org> Link: https://lore.kernel.org/r/20220407204502.2470560-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-08 04:45:02 +08:00
CONFIG_HDLC=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-29 07:17:24 +08:00
CONFIG_HDLC_RAW=m
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m
ARM: config: Refresh IXP4xx config after multiplatform After converting to multiplatform the old IXP4xx defconfig doesn't even activate the ethernet driver anymore, we need to refresh this thoroughly. - Drop options that ARCH_MULTI_V5 selects for us. - Some options moved around because of multiplatform and because generic Kconfig movements. - Drop all MACH_* that do not exist anymore. - Compress the kernel and initramfs with XZ as the memory is often limited for these machines. - Make sure IXP4XX_QMGR and IXP4XX_NPE is selected. - Make sure the MTD_PHYSMAP_IXP4XX is selected and not the old MTD_IXP4XX (will be deleted). - Activate CRYPTO_DEV_IXP4XX - Add some very basic default drivers such as AT24 EEPROMs used in many routers. - Add some kernel configs needed to bring up OpenWrt which is the only userspace for these devices: CGROUPS, DEVTMPFS, INOTIFY_USER, SIGNALFD, TIMERFD, EPOLL, OVERLAY_FS and SQUASHFS. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Arnd Bergmann <arnd@kernel.org> Cc: Krzysztof Halasa <khalasa@piap.pl> Cc: Imre Kaloz <kaloz@openwrt.org> Link: https://lore.kernel.org/r/20220407204502.2470560-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-08 04:45:02 +08:00
CONFIG_IXP4XX_HSS=m
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_GPIO=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
# CONFIG_INPUT_MOUSE is not set
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-29 07:17:24 +08:00
CONFIG_INPUT_MISC=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
# CONFIG_SERIO is not set
# CONFIG_VT is not set
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=2
ARM: config: Refresh IXP4xx config after multiplatform After converting to multiplatform the old IXP4xx defconfig doesn't even activate the ethernet driver anymore, we need to refresh this thoroughly. - Drop options that ARCH_MULTI_V5 selects for us. - Some options moved around because of multiplatform and because generic Kconfig movements. - Drop all MACH_* that do not exist anymore. - Compress the kernel and initramfs with XZ as the memory is often limited for these machines. - Make sure IXP4XX_QMGR and IXP4XX_NPE is selected. - Make sure the MTD_PHYSMAP_IXP4XX is selected and not the old MTD_IXP4XX (will be deleted). - Activate CRYPTO_DEV_IXP4XX - Add some very basic default drivers such as AT24 EEPROMs used in many routers. - Add some kernel configs needed to bring up OpenWrt which is the only userspace for these devices: CGROUPS, DEVTMPFS, INOTIFY_USER, SIGNALFD, TIMERFD, EPOLL, OVERLAY_FS and SQUASHFS. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Arnd Bergmann <arnd@kernel.org> Cc: Krzysztof Halasa <khalasa@piap.pl> Cc: Imre Kaloz <kaloz@openwrt.org> Link: https://lore.kernel.org/r/20220407204502.2470560-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-08 04:45:02 +08:00
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
ARM: ixp4xx_defconfig: add CONFIG_SERIAL_OF_PLATFORM My ixp42x-welltech-epbx100 does not print anything on console without CONFIG_SERIAL_OF_PLATFORM. Link: https://lore.kernel.org/r/20210504193457.4008384-2-clabbe@baylibre.com Signed-off-by: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2021-05-05 03:34:53 +08:00
CONFIG_SERIAL_OF_PLATFORM=y
ARM: config: Refresh IXP4xx config after multiplatform After converting to multiplatform the old IXP4xx defconfig doesn't even activate the ethernet driver anymore, we need to refresh this thoroughly. - Drop options that ARCH_MULTI_V5 selects for us. - Some options moved around because of multiplatform and because generic Kconfig movements. - Drop all MACH_* that do not exist anymore. - Compress the kernel and initramfs with XZ as the memory is often limited for these machines. - Make sure IXP4XX_QMGR and IXP4XX_NPE is selected. - Make sure the MTD_PHYSMAP_IXP4XX is selected and not the old MTD_IXP4XX (will be deleted). - Activate CRYPTO_DEV_IXP4XX - Add some very basic default drivers such as AT24 EEPROMs used in many routers. - Add some kernel configs needed to bring up OpenWrt which is the only userspace for these devices: CGROUPS, DEVTMPFS, INOTIFY_USER, SIGNALFD, TIMERFD, EPOLL, OVERLAY_FS and SQUASHFS. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Arnd Bergmann <arnd@kernel.org> Cc: Krzysztof Halasa <khalasa@piap.pl> Cc: Imre Kaloz <kaloz@openwrt.org> Link: https://lore.kernel.org/r/20220407204502.2470560-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-08 04:45:02 +08:00
CONFIG_HW_RANDOM=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
CONFIG_I2C_CHARDEV=y
ARM: config: Refresh IXP4xx config after multiplatform After converting to multiplatform the old IXP4xx defconfig doesn't even activate the ethernet driver anymore, we need to refresh this thoroughly. - Drop options that ARCH_MULTI_V5 selects for us. - Some options moved around because of multiplatform and because generic Kconfig movements. - Drop all MACH_* that do not exist anymore. - Compress the kernel and initramfs with XZ as the memory is often limited for these machines. - Make sure IXP4XX_QMGR and IXP4XX_NPE is selected. - Make sure the MTD_PHYSMAP_IXP4XX is selected and not the old MTD_IXP4XX (will be deleted). - Activate CRYPTO_DEV_IXP4XX - Add some very basic default drivers such as AT24 EEPROMs used in many routers. - Add some kernel configs needed to bring up OpenWrt which is the only userspace for these devices: CGROUPS, DEVTMPFS, INOTIFY_USER, SIGNALFD, TIMERFD, EPOLL, OVERLAY_FS and SQUASHFS. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Arnd Bergmann <arnd@kernel.org> Cc: Krzysztof Halasa <khalasa@piap.pl> Cc: Imre Kaloz <kaloz@openwrt.org> Link: https://lore.kernel.org/r/20220407204502.2470560-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-08 04:45:02 +08:00
CONFIG_I2C_GPIO=y
CONFIG_GPIO_GW_PLD=y
CONFIG_GPIO_PCA953X=y
CONFIG_SENSORS_AD7418=y
[ARM] 4874/2: ixp4xx: Add support for the Freecom FSG-3 board The Freecom-FSG3 is a small network-attached-storage device with the following feature set: * Intel IXP422 * 4MB Flash (ixp4xx flash driver) * 64MB RAM * 4 USB 2.0 host ports (ehci and ohci drivers) * 1 WAN (eth1) and 3 LAN (eth0) ethernet ports * Supported by the open source ixp4xx ethernet driver * Via VT6421 disk controller (libata and sata-via drivers) * Internal hard disk (PATA supported, SATA not yet supported) * External SATA port (not yet supported) * ISL1208 RTC chip * Winbond 83782 temp sensor and fan controller * MiniPCI slot The ixp4xx_defconfig is also updated to support this device (the leds-fsg driver is to be submitted separately via the leds tree after this initial support is merged, as it depends on header gpio defines). Signed-off-by: Rod Whitby <rod@whitby.id.au> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-01 17:53:23 +08:00
CONFIG_SENSORS_W83781D=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-29 07:17:24 +08:00
CONFIG_WATCHDOG=y
CONFIG_IXP4XX_WATCHDOG=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
ARM: reduce defconfigs Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-10 13:12:18 +08:00
CONFIG_LEDS_GPIO=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-29 07:17:24 +08:00
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
arm: use the new LED disk activity trigger - dts: rename 'ide-disk' to 'disk-activity' - platform: rename 'ide-disk' to 'disk-activity' - defconfig: rename 'LEDS_TRIGGER_IDE_DISK' to 'LEDS_TRIGGER_DISK' Signed-off-by: Stephan Linz <linz@li-pro.net> Acked-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2016-06-10 13:59:59 +08:00
CONFIG_LEDS_TRIGGER_DISK=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-29 07:17:24 +08:00
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_CLASS=y
ARM: config: Refresh IXP4xx config after multiplatform After converting to multiplatform the old IXP4xx defconfig doesn't even activate the ethernet driver anymore, we need to refresh this thoroughly. - Drop options that ARCH_MULTI_V5 selects for us. - Some options moved around because of multiplatform and because generic Kconfig movements. - Drop all MACH_* that do not exist anymore. - Compress the kernel and initramfs with XZ as the memory is often limited for these machines. - Make sure IXP4XX_QMGR and IXP4XX_NPE is selected. - Make sure the MTD_PHYSMAP_IXP4XX is selected and not the old MTD_IXP4XX (will be deleted). - Activate CRYPTO_DEV_IXP4XX - Add some very basic default drivers such as AT24 EEPROMs used in many routers. - Add some kernel configs needed to bring up OpenWrt which is the only userspace for these devices: CGROUPS, DEVTMPFS, INOTIFY_USER, SIGNALFD, TIMERFD, EPOLL, OVERLAY_FS and SQUASHFS. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Arnd Bergmann <arnd@kernel.org> Cc: Krzysztof Halasa <khalasa@piap.pl> Cc: Imre Kaloz <kaloz@openwrt.org> Link: https://lore.kernel.org/r/20220407204502.2470560-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-08 04:45:02 +08:00
CONFIG_RTC_DRV_DS1672=y
[ARM] 4874/2: ixp4xx: Add support for the Freecom FSG-3 board The Freecom-FSG3 is a small network-attached-storage device with the following feature set: * Intel IXP422 * 4MB Flash (ixp4xx flash driver) * 64MB RAM * 4 USB 2.0 host ports (ehci and ohci drivers) * 1 WAN (eth1) and 3 LAN (eth0) ethernet ports * Supported by the open source ixp4xx ethernet driver * Via VT6421 disk controller (libata and sata-via drivers) * Internal hard disk (PATA supported, SATA not yet supported) * External SATA port (not yet supported) * ISL1208 RTC chip * Winbond 83782 temp sensor and fan controller * MiniPCI slot The ixp4xx_defconfig is also updated to support this device (the leds-fsg driver is to be submitted separately via the leds tree after this initial support is merged, as it depends on header gpio defines). Signed-off-by: Rod Whitby <rod@whitby.id.au> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-01 17:53:23 +08:00
CONFIG_RTC_DRV_ISL1208=y
[ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards This updates the defconfig for the ixp4xx machine in arch/arm/config taking all the defaults, with the following additions: 1) Enable support for the nslu2, loft, gateway7001, wg302v2, dsmg600, and gtwx5715 boards. 2) Enable EABI, OABI, HOTPLUG and FW_LOADER. 3) Enable the RTC subsystem, with drivers for the RTC chips on the nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards. 4) Enable the LEDS subsystem to support the nslu2, nas100d and dsmg600 boards. Enable the ixp4xx beeper driver. 5) Enable the USB subsystem, USB host driver support and USB mass storage support (required for boot disk on nslu2 board). 6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600 (pata_artop) and avila (ixp4xx_cf) boards. Signed-off-by: Rod Whitby <rod@whitby.id.au> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-29 07:17:24 +08:00
CONFIG_RTC_DRV_X1205=y
CONFIG_RTC_DRV_PCF8563=y
ARM: config: Refresh IXP4xx config after multiplatform After converting to multiplatform the old IXP4xx defconfig doesn't even activate the ethernet driver anymore, we need to refresh this thoroughly. - Drop options that ARCH_MULTI_V5 selects for us. - Some options moved around because of multiplatform and because generic Kconfig movements. - Drop all MACH_* that do not exist anymore. - Compress the kernel and initramfs with XZ as the memory is often limited for these machines. - Make sure IXP4XX_QMGR and IXP4XX_NPE is selected. - Make sure the MTD_PHYSMAP_IXP4XX is selected and not the old MTD_IXP4XX (will be deleted). - Activate CRYPTO_DEV_IXP4XX - Add some very basic default drivers such as AT24 EEPROMs used in many routers. - Add some kernel configs needed to bring up OpenWrt which is the only userspace for these devices: CGROUPS, DEVTMPFS, INOTIFY_USER, SIGNALFD, TIMERFD, EPOLL, OVERLAY_FS and SQUASHFS. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Arnd Bergmann <arnd@kernel.org> Cc: Krzysztof Halasa <khalasa@piap.pl> Cc: Imre Kaloz <kaloz@openwrt.org> Link: https://lore.kernel.org/r/20220407204502.2470560-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-08 04:45:02 +08:00
CONFIG_IXP4XX_QMGR=y
CONFIG_IXP4XX_NPE=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_POSIX_ACL=y
ARM: config: Refresh IXP4xx config after multiplatform After converting to multiplatform the old IXP4xx defconfig doesn't even activate the ethernet driver anymore, we need to refresh this thoroughly. - Drop options that ARCH_MULTI_V5 selects for us. - Some options moved around because of multiplatform and because generic Kconfig movements. - Drop all MACH_* that do not exist anymore. - Compress the kernel and initramfs with XZ as the memory is often limited for these machines. - Make sure IXP4XX_QMGR and IXP4XX_NPE is selected. - Make sure the MTD_PHYSMAP_IXP4XX is selected and not the old MTD_IXP4XX (will be deleted). - Activate CRYPTO_DEV_IXP4XX - Add some very basic default drivers such as AT24 EEPROMs used in many routers. - Add some kernel configs needed to bring up OpenWrt which is the only userspace for these devices: CGROUPS, DEVTMPFS, INOTIFY_USER, SIGNALFD, TIMERFD, EPOLL, OVERLAY_FS and SQUASHFS. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Arnd Bergmann <arnd@kernel.org> Cc: Krzysztof Halasa <khalasa@piap.pl> Cc: Imre Kaloz <kaloz@openwrt.org> Link: https://lore.kernel.org/r/20220407204502.2470560-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-08 04:45:02 +08:00
CONFIG_OVERLAY_FS=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
CONFIG_TMPFS=y
ARM: config: Refresh IXP4xx config after multiplatform After converting to multiplatform the old IXP4xx defconfig doesn't even activate the ethernet driver anymore, we need to refresh this thoroughly. - Drop options that ARCH_MULTI_V5 selects for us. - Some options moved around because of multiplatform and because generic Kconfig movements. - Drop all MACH_* that do not exist anymore. - Compress the kernel and initramfs with XZ as the memory is often limited for these machines. - Make sure IXP4XX_QMGR and IXP4XX_NPE is selected. - Make sure the MTD_PHYSMAP_IXP4XX is selected and not the old MTD_IXP4XX (will be deleted). - Activate CRYPTO_DEV_IXP4XX - Add some very basic default drivers such as AT24 EEPROMs used in many routers. - Add some kernel configs needed to bring up OpenWrt which is the only userspace for these devices: CGROUPS, DEVTMPFS, INOTIFY_USER, SIGNALFD, TIMERFD, EPOLL, OVERLAY_FS and SQUASHFS. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Arnd Bergmann <arnd@kernel.org> Cc: Krzysztof Halasa <khalasa@piap.pl> Cc: Imre Kaloz <kaloz@openwrt.org> Link: https://lore.kernel.org/r/20220407204502.2470560-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-08 04:45:02 +08:00
CONFIG_TMPFS_POSIX_ACL=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
CONFIG_JFFS2_FS=y
ARM: config: Refresh IXP4xx config after multiplatform After converting to multiplatform the old IXP4xx defconfig doesn't even activate the ethernet driver anymore, we need to refresh this thoroughly. - Drop options that ARCH_MULTI_V5 selects for us. - Some options moved around because of multiplatform and because generic Kconfig movements. - Drop all MACH_* that do not exist anymore. - Compress the kernel and initramfs with XZ as the memory is often limited for these machines. - Make sure IXP4XX_QMGR and IXP4XX_NPE is selected. - Make sure the MTD_PHYSMAP_IXP4XX is selected and not the old MTD_IXP4XX (will be deleted). - Activate CRYPTO_DEV_IXP4XX - Add some very basic default drivers such as AT24 EEPROMs used in many routers. - Add some kernel configs needed to bring up OpenWrt which is the only userspace for these devices: CGROUPS, DEVTMPFS, INOTIFY_USER, SIGNALFD, TIMERFD, EPOLL, OVERLAY_FS and SQUASHFS. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Arnd Bergmann <arnd@kernel.org> Cc: Krzysztof Halasa <khalasa@piap.pl> Cc: Imre Kaloz <kaloz@openwrt.org> Link: https://lore.kernel.org/r/20220407204502.2470560-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-08 04:45:02 +08:00
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_XZ=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
ARM: config: Refresh IXP4xx config after multiplatform After converting to multiplatform the old IXP4xx defconfig doesn't even activate the ethernet driver anymore, we need to refresh this thoroughly. - Drop options that ARCH_MULTI_V5 selects for us. - Some options moved around because of multiplatform and because generic Kconfig movements. - Drop all MACH_* that do not exist anymore. - Compress the kernel and initramfs with XZ as the memory is often limited for these machines. - Make sure IXP4XX_QMGR and IXP4XX_NPE is selected. - Make sure the MTD_PHYSMAP_IXP4XX is selected and not the old MTD_IXP4XX (will be deleted). - Activate CRYPTO_DEV_IXP4XX - Add some very basic default drivers such as AT24 EEPROMs used in many routers. - Add some kernel configs needed to bring up OpenWrt which is the only userspace for these devices: CGROUPS, DEVTMPFS, INOTIFY_USER, SIGNALFD, TIMERFD, EPOLL, OVERLAY_FS and SQUASHFS. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Arnd Bergmann <arnd@kernel.org> Cc: Krzysztof Halasa <khalasa@piap.pl> Cc: Imre Kaloz <kaloz@openwrt.org> Link: https://lore.kernel.org/r/20220407204502.2470560-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-08 04:45:02 +08:00
CONFIG_CRYPTO_DEV_IXP4XX=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
CONFIG_MAGIC_SYSRQ=y
ARM: config: Refresh IXP4xx config after multiplatform After converting to multiplatform the old IXP4xx defconfig doesn't even activate the ethernet driver anymore, we need to refresh this thoroughly. - Drop options that ARCH_MULTI_V5 selects for us. - Some options moved around because of multiplatform and because generic Kconfig movements. - Drop all MACH_* that do not exist anymore. - Compress the kernel and initramfs with XZ as the memory is often limited for these machines. - Make sure IXP4XX_QMGR and IXP4XX_NPE is selected. - Make sure the MTD_PHYSMAP_IXP4XX is selected and not the old MTD_IXP4XX (will be deleted). - Activate CRYPTO_DEV_IXP4XX - Add some very basic default drivers such as AT24 EEPROMs used in many routers. - Add some kernel configs needed to bring up OpenWrt which is the only userspace for these devices: CGROUPS, DEVTMPFS, INOTIFY_USER, SIGNALFD, TIMERFD, EPOLL, OVERLAY_FS and SQUASHFS. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Arnd Bergmann <arnd@kernel.org> Cc: Krzysztof Halasa <khalasa@piap.pl> Cc: Imre Kaloz <kaloz@openwrt.org> Link: https://lore.kernel.org/r/20220407204502.2470560-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-08 04:45:02 +08:00
CONFIG_DEBUG_FS=y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
CONFIG_DEBUG_LL=y
ARM: 8268/1: configs: Enable DEBUG_LL_UART_8250 where needed All defconfigs touched by this patch already enable DEBUG_LL and by default DEBUG_LL_UART_NONE will be selected. This causes no issues today because due to some back compatibility magic we eventually need to remove it is not actually honoured. Nevertheless DEBUG_LL_UART_8250 is the right value for these platforms and should be set in the config files. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-01-10 01:33:16 +08:00
CONFIG_DEBUG_LL_UART_8250=y