UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/net/dsa/Kconfig

78 lines
2.1 KiB
Plaintext
Raw Normal View History

dsa: Move switch drivers to new directory drivers/net/dsa Support for specific hardware belongs under drivers/net/ not net/. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28 01:08:33 +08:00
menu "Distributed Switch Architecture drivers"
dsa: Hide core config options; make drivers select what they need Commit 82167cb8c6b2f8166d5c7532e5ef4b5e0cc46a72 ('net: dsa/slave: Fix compilation warnings') fixed one possible invalid configuration (NET_DSA enabled with no trailer formats) but added others: drivers can select NET_DSA without its dependencies being met. It's not very useful to make either the DSA core or the tagging formats manually selectable without a driver to use them, so: 1. Define a hidden HAVE_NET_DSA option and move the dependencies of NET_DSA to that. While we're at it, drop the deprecated EXPERIMENTAL dependency. 2. Make NET_DSA and the drivers dependent on HAVE_NET_DSA. 3. Hide the tagging format options again. 4. Make drivers select both NET_DSA and the appropriate tagging format option. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-26 17:16:10 +08:00
depends on HAVE_NET_DSA
dsa: Move switch drivers to new directory drivers/net/dsa Support for specific hardware belongs under drivers/net/ not net/. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28 01:08:33 +08:00
drivers: net: DSA: Sort drivers With more drivers being added, it is time to sort the drivers to impose some order. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17 04:40:08 +08:00
source "drivers/net/dsa/b53/Kconfig"
dsa: Move switch drivers to new directory drivers/net/dsa Support for specific hardware belongs under drivers/net/ not net/. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28 01:08:33 +08:00
net: dsa: add Broadcom SF2 switch driver Add support for the Broadcom Starfigther 2 switch chip using a DSA driver. This switch driver supports the following features: - configuration of the external switch port interface: MII, RevMII, RGMII and RGMII_NO_ID are supported - support for the per-port MIB counters - support for link interrupts for special ports (e.g: MoCA) - powering up/down of switch memories to conserve power when ports are unused Finally, update the compatible property for the DSA core code to match our switch top-level compatible node. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-28 08:04:56 +08:00
config NET_DSA_BCM_SF2
tristate "Broadcom Starfighter 2 Ethernet switch support"
net: dsa: bcm_sf2: Add missing OF_MDIO dependency bcm_sf2 does require the MDIO_BCM_UNIMAC driver which is now dependent on OF_MDIO but also internally uses of_mdio.c provided routines which are guarted with OF_MDIO. Reported-by: kbuild test robot <fengguang.wu@intel.com> Fixes: 90eff9096c01 ("net: phy: Allow splitting MDIO bus/device support from PHYs") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-25 05:57:22 +08:00
depends on HAS_IOMEM && NET_DSA && OF_MDIO
net: dsa: add Broadcom SF2 switch driver Add support for the Broadcom Starfigther 2 switch chip using a DSA driver. This switch driver supports the following features: - configuration of the external switch port interface: MII, RevMII, RGMII and RGMII_NO_ID are supported - support for the per-port MIB counters - support for link interrupts for special ports (e.g: MoCA) - powering up/down of switch memories to conserve power when ports are unused Finally, update the compatible property for the DSA core code to match our switch top-level compatible node. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-28 08:04:56 +08:00
select NET_DSA_TAG_BRCM
net: dsa: bcm_sf2: always select FIXED_PHY There is no need to do the following: select FIXED_PHY if NET_DSA_BCM_SF2=y, as this implies that we will not be able to build and/or run the driver correctly when built as a module, which is no longer an issue since commit 37e9a6904520 ("net: phy: export fixed_phy_register()"). Fixes: 246d7f773c13ca ("net: dsa: add Broadcom SF2 switch driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-16 01:57:15 +08:00
select FIXED_PHY
net: dsa: add Broadcom SF2 switch driver Add support for the Broadcom Starfigther 2 switch chip using a DSA driver. This switch driver supports the following features: - configuration of the external switch port interface: MII, RevMII, RGMII and RGMII_NO_ID are supported - support for the per-port MIB counters - support for link interrupts for special ports (e.g: MoCA) - powering up/down of switch memories to conserve power when ports are unused Finally, update the compatible property for the DSA core code to match our switch top-level compatible node. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-28 08:04:56 +08:00
select BCM7XXX_PHY
select MDIO_BCM_UNIMAC
net: dsa: bcm_sf2: Utilize core B53 driver when possible The Broadcom Starfighter2 is almost entirely register compatible with B53, yet for historical reasons came up first in the tree and is now being updated to utilize b53_common.c to the fullest extent possible. A few things need to be adjusted to allow that: - the switch "core" registers currently operate on a 32-bit address, whereas b53 passes a page + reg pair to offset from, so we need to convert that, thankfully there is a generic formula to do that - the link managemenent is not self contained with the B53/CORE register set, but instead is in the SWITCH_REG block which is part of the integration glue logic, so we keep that entirely custom here because this really is part of the existing bcm_sf2 implementation - there are additional power management constraints on the port's memories that make us keep the port_enable/disable callbacks custom for now, also, we support tagging whereas b53_common does not support that yet All the VLAN and bridge code is entirely identical though so, avoid duplicating it. Other things will be migrated in the future like EEE and possibly Wake-on-LAN. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-27 03:18:33 +08:00
select B53
net: dsa: add Broadcom SF2 switch driver Add support for the Broadcom Starfigther 2 switch chip using a DSA driver. This switch driver supports the following features: - configuration of the external switch port interface: MII, RevMII, RGMII and RGMII_NO_ID are supported - support for the per-port MIB counters - support for link interrupts for special ports (e.g: MoCA) - powering up/down of switch memories to conserve power when ports are unused Finally, update the compatible property for the DSA core code to match our switch top-level compatible node. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-28 08:04:56 +08:00
---help---
This enables support for the Broadcom Starfighter 2 Ethernet
switch chips.
net: dsa: Mock-up driver This patch adds support for a DSA mock-up driver which essentially does the following: - registers/unregisters 4 fixed PHYs to the slave network devices - uses eth0 (configurable) as the master netdev - registers the switch as a fixed MDIO device against the fixed MDIO bus at address 31 - includes dynamic debug prints for dsa_switch_ops functions that can be enabled to get call traces This is a good way to test modular builds as well as exercise the DSA APIs without requiring access to real hardware. This does not test the data-path, although this could be added later on. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-31 09:43:21 +08:00
config NET_DSA_LOOP
tristate "DSA mock-up Ethernet switch chip support"
depends on NET_DSA
select FIXED_PHY
---help---
This enables support for a fake mock-up switch chip which
exercises the DSA APIs.
net-next: dsa: add dsa support for Mediatek MT7530 switch MT7530 is a 7-ports Gigabit Ethernet Switch that could be found on Mediatek router platforms such as MT7623A or MT7623N platform which includes 7-port Gigabit Ethernet MAC and 5-port Gigabit Ethernet PHY. Among these ports, The port from 0 to 4 are the user ports connecting with the remote devices while the port 5 and 6 are the CPU ports connecting into Mediatek Ethernet GMAC. For port 6, it can communicate with the CPU via Mediatek Ethernet GMAC through either the TRGMII or RGMII which could be controlled by phy-mode in the dt-bindings to specify which mode is preferred to use. And for port 5, only RGMII can be specified. However, currently, only port 6 is being supported in this DSA driver. The driver is made with the reference to qca8k and other existing DSA driver. The most of the essential callbacks of the DSA are already support in the driver, including tag insert for user port distinguishing, port control, bridge offloading, STP setup and ethtool operation to allow DSA to model each user port into a standalone netdevice as the other DSA driver had done. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Landen Chao <Landen.Chao@mediatek.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-07 16:45:09 +08:00
config NET_DSA_MT7530
tristate "Mediatek MT7530 Ethernet switch support"
depends on NET_DSA
select NET_DSA_TAG_MTK
---help---
This enables support for the Mediatek MT7530 Ethernet switch
chip.
drivers: net: DSA: Sort drivers With more drivers being added, it is time to sort the drivers to impose some order. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17 04:40:08 +08:00
config NET_DSA_MV88E6060
tristate "Marvell 88E6060 ethernet switch chip support"
depends on NET_DSA
select NET_DSA_TAG_TRAILER
---help---
This enables support for the Marvell 88E6060 ethernet switch
chip.
source "drivers/net/dsa/mv88e6xxx/Kconfig"
config NET_DSA_QCA8K
tristate "Qualcomm Atheros QCA8K Ethernet switch family support"
depends on NET_DSA
select NET_DSA_TAG_QCA
select REGMAP
---help---
This enables support for the Qualcomm Atheros QCA8K Ethernet
switch chips.
net: dsa: LAN9303: add I2C managed mode support In this mode the switch device and the internal phys will be managed via I2C interface. The MDIO interface is still supported, but for the (emulated) CPU port only. Signed-off-by: Juergen Borleis <jbe@pengutronix.de> CC: devicetree@vger.kernel.org CC: robh+dt@kernel.org CC: mark.rutland@arm.com Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18 16:48:26 +08:00
config NET_DSA_SMSC_LAN9303
tristate
select NET_DSA_TAG_LAN9303
---help---
This enables support for the SMSC/Microchip LAN9303 3 port ethernet
switch chips.
config NET_DSA_SMSC_LAN9303_I2C
tristate "SMSC/Microchip LAN9303 3-ports 10/100 ethernet switch in I2C managed mode"
net: dsa: LAN9303: add I2C dependency With CONFIG_I2C=m and NET_DSA_SMSC_LAN9303=y, we run into a link error: drivers/base/regmap/regmap-i2c.o: In function `regmap_smbus_byte_reg_read': regmap-i2c.c:(.text.regmap_smbus_byte_reg_read+0x18): undefined reference to `i2c_smbus_read_byte_data' drivers/base/regmap/regmap-i2c.o: In function `regmap_smbus_byte_reg_write': regmap-i2c.c:(.text.regmap_smbus_byte_reg_write+0x18): undefined reference to `i2c_smbus_write_byte_data' drivers/base/regmap/regmap-i2c.o: In function `regmap_smbus_word_reg_read': regmap-i2c.c:(.text.regmap_smbus_word_reg_read+0x18): undefined reference to `i2c_smbus_read_word_data' drivers/base/regmap/regmap-i2c.o: In function `regmap_smbus_word_read_swapped': regmap-i2c.c:(.text.regmap_smbus_word_read_swapped+0x18): undefined reference to `i2c_smbus_read_word_data' drivers/base/regmap/regmap-i2c.o: In function `regmap_smbus_word_write_swapped': This adds a Kconfig dependency to avoid the broken configuration. Fixes: be4e119f9914 ("net: dsa: LAN9303: add I2C managed mode support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-22 00:22:40 +08:00
depends on NET_DSA && I2C
net: dsa: LAN9303: add I2C managed mode support In this mode the switch device and the internal phys will be managed via I2C interface. The MDIO interface is still supported, but for the (emulated) CPU port only. Signed-off-by: Juergen Borleis <jbe@pengutronix.de> CC: devicetree@vger.kernel.org CC: robh+dt@kernel.org CC: mark.rutland@arm.com Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18 16:48:26 +08:00
select NET_DSA_SMSC_LAN9303
select REGMAP_I2C
---help---
Enable access functions if the SMSC/Microchip LAN9303 is configured
for I2C managed mode.
net: dsa: LAN9303: add MDIO managed mode support When the LAN9303 device is in MDIO manged mode, all register accesses must be done via MDIO. Please note: this code is compile time tested only due to the absence of such configured hardware. It is based on a patch from Stefan Roese from 2014. Signed-off-by: Juergen Borleis <jbe@pengutronix.de> CC: devicetree@vger.kernel.org CC: robh+dt@kernel.org CC: mark.rutland@arm.com CC: sr@denx.de Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-18 16:48:27 +08:00
config NET_DSA_SMSC_LAN9303_MDIO
tristate "SMSC/Microchip LAN9303 3-ports 10/100 ethernet switch in MDIO managed mode"
depends on NET_DSA
select NET_DSA_SMSC_LAN9303
---help---
Enable access functions if the SMSC/Microchip LAN9303 is configured
for MDIO managed mode.
dsa: Move switch drivers to new directory drivers/net/dsa Support for specific hardware belongs under drivers/net/ not net/. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-28 01:08:33 +08:00
endmenu