OpenCloudOS-Kernel/drivers/gpu/drm/msm/msm_atomic.c

297 lines
7.6 KiB
C
Raw Normal View History

/*
* Copyright (C) 2014 Red Hat
* Author: Rob Clark <robdclark@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "msm_drv.h"
#include "msm_kms.h"
#include "msm_gem.h"
struct msm_commit {
struct drm_device *dev;
struct drm_atomic_state *state;
uint32_t fence;
struct msm_fence_cb fence_cb;
uint32_t crtc_mask;
};
static void fence_cb(struct msm_fence_cb *cb);
/* block until specified crtcs are no longer pending update, and
* atomically mark them as pending update
*/
static int start_atomic(struct msm_drm_private *priv, uint32_t crtc_mask)
{
int ret;
spin_lock(&priv->pending_crtcs_event.lock);
ret = wait_event_interruptible_locked(priv->pending_crtcs_event,
!(priv->pending_crtcs & crtc_mask));
if (ret == 0) {
DBG("start: %08x", crtc_mask);
priv->pending_crtcs |= crtc_mask;
}
spin_unlock(&priv->pending_crtcs_event.lock);
return ret;
}
/* clear specified crtcs (no longer pending update)
*/
static void end_atomic(struct msm_drm_private *priv, uint32_t crtc_mask)
{
spin_lock(&priv->pending_crtcs_event.lock);
DBG("end: %08x", crtc_mask);
priv->pending_crtcs &= ~crtc_mask;
wake_up_all_locked(&priv->pending_crtcs_event);
spin_unlock(&priv->pending_crtcs_event.lock);
}
static struct msm_commit *commit_init(struct drm_atomic_state *state)
{
struct msm_commit *c = kzalloc(sizeof(*c), GFP_KERNEL);
if (!c)
return NULL;
c->dev = state->dev;
c->state = state;
/* TODO we might need a way to indicate to run the cb on a
* different wq so wait_for_vblanks() doesn't block retiring
* bo's..
*/
INIT_FENCE_CB(&c->fence_cb, fence_cb);
return c;
}
static void commit_destroy(struct msm_commit *c)
{
end_atomic(c->dev->dev_private, c->crtc_mask);
kfree(c);
}
static void msm_atomic_wait_for_commit_done(struct drm_device *dev,
struct drm_atomic_state *old_state)
{
struct drm_crtc *crtc;
struct msm_drm_private *priv = old_state->dev->dev_private;
struct msm_kms *kms = priv->kms;
int ncrtcs = old_state->dev->mode_config.num_crtc;
int i;
for (i = 0; i < ncrtcs; i++) {
crtc = old_state->crtcs[i];
if (!crtc)
continue;
if (!crtc->state->enable)
continue;
/* Legacy cursor ioctls are completely unsynced, and userspace
* relies on that (by doing tons of cursor updates). */
if (old_state->legacy_cursor_update)
continue;
kms->funcs->wait_for_crtc_commit_done(kms, crtc);
}
}
/* The (potentially) asynchronous part of the commit. At this point
* nothing can fail short of armageddon.
*/
static void complete_commit(struct msm_commit *c)
{
struct drm_atomic_state *state = c->state;
struct drm_device *dev = state->dev;
struct msm_drm_private *priv = dev->dev_private;
struct msm_kms *kms = priv->kms;
kms->funcs->prepare_commit(kms, state);
drm_atomic_helper_commit_modeset_disables(dev, state);
drm_atomic_helper_commit_planes(dev, state);
drm_atomic_helper_commit_modeset_enables(dev, state);
/* NOTE: _wait_for_vblanks() only waits for vblank on
* enabled CRTCs. So we end up faulting when disabling
* due to (potentially) unref'ing the outgoing fb's
* before the vblank when the disable has latched.
*
* But if it did wait on disabled (or newly disabled)
* CRTCs, that would be racy (ie. we could have missed
* the irq. We need some way to poll for pipe shut
* down. Or just live with occasionally hitting the
* timeout in the CRTC disable path (which really should
* not be critical path)
*/
msm_atomic_wait_for_commit_done(dev, state);
drm_atomic_helper_cleanup_planes(dev, state);
kms->funcs->complete_commit(kms, state);
drm_atomic_state_free(state);
commit_destroy(c);
}
static void fence_cb(struct msm_fence_cb *cb)
{
struct msm_commit *c =
container_of(cb, struct msm_commit, fence_cb);
complete_commit(c);
}
static void add_fb(struct msm_commit *c, struct drm_framebuffer *fb)
{
struct drm_gem_object *obj = msm_framebuffer_bo(fb, 0);
c->fence = max(c->fence, msm_gem_fence(to_msm_bo(obj), MSM_PREP_READ));
}
drm/atomic-helper: Again check modeset *before* plane states This essentially reverts commit 934ce1c23624526d9d784e0499190bb48113e6f4 Author: Rob Clark <robdclark@gmail.com> Date: Wed Nov 19 16:41:33 2014 -0500 drm/atomic: check mode_changed *after* atomic_check Depending upon the driver both orders (or maybe even interleaving) is required: - If ->atomic_check updates ->mode_changed then helper_check_modeset must be run afters. - If ->atomic_check depends upon accurate adjusted dotclock values for e.g. watermarks, then helper_check_modeset must be run first. The failure mode in the first case is usually a totally angry hw because the pixel format switching doesn't happen. The failure mode in the later case is usually nothing, since in most cases the old adjusted mode from the previous modeset wont be too far off to be a problem. So just underruns and perhaps even just suboptimal (from a power consumption) watermarks. Furthermore in the transitional helpers we only call ->atomic_check after the new modeset state has been fully set up (and hence computed). Given that asymmetry in expected failure modes I think it's safer to go back to the older order. So do that and give msm a special check function to compensate. Also update kerneldoc to explain this a bit. v2: Actually add the missing hunk Rob spotted. v3: Move msm_atomic_check into msm_atomic.c, requested by Rob. Cc: Rob Clark <robdclark@gmail.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Tested-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2014-11-27 00:02:18 +08:00
int msm_atomic_check(struct drm_device *dev,
struct drm_atomic_state *state)
{
int ret;
/*
* msm ->atomic_check can update ->mode_changed for pixel format
* changes, hence must be run before we check the modeset changes.
*/
ret = drm_atomic_helper_check_planes(dev, state);
if (ret)
return ret;
ret = drm_atomic_helper_check_modeset(dev, state);
if (ret)
return ret;
return ret;
}
/**
* drm_atomic_helper_commit - commit validated state object
* @dev: DRM device
* @state: the driver state object
* @async: asynchronous commit
*
* This function commits a with drm_atomic_helper_check() pre-validated state
* object. This can still fail when e.g. the framebuffer reservation fails. For
* now this doesn't implement asynchronous commits.
*
* RETURNS
* Zero for success or -errno.
*/
int msm_atomic_commit(struct drm_device *dev,
struct drm_atomic_state *state, bool async)
{
int nplanes = dev->mode_config.num_total_plane;
int ncrtcs = dev->mode_config.num_crtc;
ktime_t timeout;
struct msm_commit *c;
int i, ret;
ret = drm_atomic_helper_prepare_planes(dev, state);
if (ret)
return ret;
c = commit_init(state);
if (!c) {
ret = -ENOMEM;
goto error;
}
/*
* Figure out what crtcs we have:
*/
for (i = 0; i < ncrtcs; i++) {
struct drm_crtc *crtc = state->crtcs[i];
if (!crtc)
continue;
c->crtc_mask |= (1 << drm_crtc_index(crtc));
}
/*
* Figure out what fence to wait for:
*/
for (i = 0; i < nplanes; i++) {
struct drm_plane *plane = state->planes[i];
struct drm_plane_state *new_state = state->plane_states[i];
if (!plane)
continue;
if ((plane->state->fb != new_state->fb) && new_state->fb)
add_fb(c, new_state->fb);
}
/*
* Wait for pending updates on any of the same crtc's and then
* mark our set of crtc's as busy:
*/
ret = start_atomic(dev->dev_private, c->crtc_mask);
if (ret) {
kfree(c);
goto error;
}
/*
* This is the point of no return - everything below never fails except
* when the hw goes bonghits. Which means we can commit the new state on
* the software side now.
*/
drm_atomic_helper_swap_state(dev, state);
/*
* Everything below can be run asynchronously without the need to grab
* any modeset locks at all under one conditions: It must be guaranteed
* that the asynchronous work has either been cancelled (if the driver
* supports it, which at least requires that the framebuffers get
* cleaned up with drm_atomic_helper_cleanup_planes()) or completed
* before the new state gets committed on the software side with
* drm_atomic_helper_swap_state().
*
* This scheme allows new atomic state updates to be prepared and
* checked in parallel to the asynchronous completion of the previous
* update. Which is important since compositors need to figure out the
* composition of the next frame right after having submitted the
* current layout.
*/
if (async) {
msm_queue_fence_cb(dev, &c->fence_cb, c->fence);
return 0;
}
timeout = ktime_add_ms(ktime_get(), 1000);
/* uninterruptible wait */
msm_wait_fence(dev, c->fence, &timeout, false);
complete_commit(c);
return 0;
error:
drm_atomic_helper_cleanup_planes(dev, state);
return ret;
}