OpenCloudOS-Kernel/include/asm-generic/sections.h

231 lines
7.5 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _ASM_GENERIC_SECTIONS_H_
#define _ASM_GENERIC_SECTIONS_H_
/* References to section boundaries */
#include <linux/compiler.h>
#include <linux/types.h>
vmlinux.lds: add comments for global variables and clean up useless declarations The original goal of this patchset is to fix the bug reported by https://bugzilla.kernel.org/show_bug.cgi?id=53501 Now it has also been expanded to reduce common code used by memory initializion. Patch 1-7: 1) add comments for global variables exported by vmlinux.lds 2) normalize global variables exported by vmlinux.lds Patch 8: Introduce helper functions mem_init_print_info() and get_num_physpages() Patch 9: Avoid using global variable num_physpages at runtime Patch 10: Don't update num_physpages in memory_hotplug.c Patch 11-40: Modify arch mm initialization code to: 1) Simplify mem_init() by using mem_init_print_info() 2) Prepare for killing global variable num_physpages Patch 41: Kill the global variable num_physpages With all patches applied, mem_init(), free_initmem(), free_initrd_mem() could be as simple as below. This patch series has reduced about 1.2K lines of code in total. #ifndef CONFIG_DISCONTIGMEM void __init mem_init(void) { max_mapnr = max_low_pfn; free_all_bootmem(); high_memory = (void *) __va(max_low_pfn * PAGE_SIZE); mem_init_print_info(NULL); } #endif /* CONFIG_DISCONTIGMEM */ void free_initmem(void) { free_initmem_default(-1); } #ifdef CONFIG_BLK_DEV_INITRD void free_initrd_mem(unsigned long start, unsigned long end) { free_reserved_area(start, end, -1, "initrd"); } #endif Due to hardware resource limitations, I have only tested this on x86_64. And the messages reported on an x86_64 system are: Log message before applying patches: Memory: 7745676k/8910848k available (6934k kernel code, 836024k absent, 329148k reserved, 6343k data, 1012k init) Log message after applying patches: Memory: 7744624K/8074824K available (6969K kernel code, 1011K data, 2828K rodata, 1016K init, 9640K bss, 330200K reserved) Great thanks to Vineet Gupta for testing on ARC. This patch: Document global variables exported from vmlinux.lds. 1) Add comments about usage guidelines for global variables exported from vmlinux.lds.S. 2) Remove unused __initdata_begin[] and __initdata_end[]. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 06:03:33 +08:00
/*
* Usage guidelines:
* _text, _data: architecture specific, don't use them in arch-independent code
* [_stext, _etext]: contains .text.* sections, may also contain .rodata.*
* and/or .init.* sections
* [_sdata, _edata]: contains .data.* sections, may also contain .rodata.*
* and/or .init.* sections.
* [__start_rodata, __end_rodata]: contains .rodata.* sections
* [__start_ro_after_init, __end_ro_after_init]:
* contains .data..ro_after_init section
vmlinux.lds: add comments for global variables and clean up useless declarations The original goal of this patchset is to fix the bug reported by https://bugzilla.kernel.org/show_bug.cgi?id=53501 Now it has also been expanded to reduce common code used by memory initializion. Patch 1-7: 1) add comments for global variables exported by vmlinux.lds 2) normalize global variables exported by vmlinux.lds Patch 8: Introduce helper functions mem_init_print_info() and get_num_physpages() Patch 9: Avoid using global variable num_physpages at runtime Patch 10: Don't update num_physpages in memory_hotplug.c Patch 11-40: Modify arch mm initialization code to: 1) Simplify mem_init() by using mem_init_print_info() 2) Prepare for killing global variable num_physpages Patch 41: Kill the global variable num_physpages With all patches applied, mem_init(), free_initmem(), free_initrd_mem() could be as simple as below. This patch series has reduced about 1.2K lines of code in total. #ifndef CONFIG_DISCONTIGMEM void __init mem_init(void) { max_mapnr = max_low_pfn; free_all_bootmem(); high_memory = (void *) __va(max_low_pfn * PAGE_SIZE); mem_init_print_info(NULL); } #endif /* CONFIG_DISCONTIGMEM */ void free_initmem(void) { free_initmem_default(-1); } #ifdef CONFIG_BLK_DEV_INITRD void free_initrd_mem(unsigned long start, unsigned long end) { free_reserved_area(start, end, -1, "initrd"); } #endif Due to hardware resource limitations, I have only tested this on x86_64. And the messages reported on an x86_64 system are: Log message before applying patches: Memory: 7745676k/8910848k available (6934k kernel code, 836024k absent, 329148k reserved, 6343k data, 1012k init) Log message after applying patches: Memory: 7744624K/8074824K available (6969K kernel code, 1011K data, 2828K rodata, 1016K init, 9640K bss, 330200K reserved) Great thanks to Vineet Gupta for testing on ARC. This patch: Document global variables exported from vmlinux.lds. 1) Add comments about usage guidelines for global variables exported from vmlinux.lds.S. 2) Remove unused __initdata_begin[] and __initdata_end[]. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 06:03:33 +08:00
* [__init_begin, __init_end]: contains .init.* sections, but .init.text.*
* may be out of this range on some architectures.
* [_sinittext, _einittext]: contains .init.text.* sections
* [__bss_start, __bss_stop]: contains BSS sections
*
* Following global variables are optional and may be unavailable on some
* architectures and/or kernel configurations.
* _text, _data
* __kprobes_text_start, __kprobes_text_end
* __entry_text_start, __entry_text_end
* __ctors_start, __ctors_end
* __irqentry_text_start, __irqentry_text_end
* __softirqentry_text_start, __softirqentry_text_end
sections: split dereference_function_descriptor() There are two format specifiers to print out a pointer in symbolic format: '%pS/%ps' and '%pF/%pf'. On most architectures, the two mean exactly the same thing, but some architectures (ia64, ppc64, parisc64) use an indirect pointer for C function pointers, where the function pointer points to a function descriptor (which in turn contains the actual pointer to the code). The '%pF/%pf, when used appropriately, automatically does the appropriate function descriptor dereference on such architectures. The "when used appropriately" part is tricky. Basically this is a subtle ABI detail, specific to some platforms, that made it to the API level and people can be unaware of it and miss the whole "we need to dereference the function" business out. [1] proves that point (note that it fixes only '%pF' and '%pS', there might be '%pf' and '%ps' cases as well). It appears that we can handle everything within the affected arches and make '%pS/%ps' smart enough to retire '%pF/%pf'. Function descriptors live in .opd elf section and all affected arches (ia64, ppc64, parisc64) handle it properly for kernel and modules. So we, technically, can decide if the dereference is needed by simply looking at the pointer: if it belongs to .opd section then we need to dereference it. The kernel and modules have their own .opd sections, obviously, that's why we need to split dereference_function_descriptor() and use separate kernel and module dereference arch callbacks. This patch does the first step, it a) adds dereference_kernel_function_descriptor() function. b) adds a weak alias to dereference_module_function_descriptor() function. So, for the time being, we will have: 1) dereference_function_descriptor() A generic function, that simply dereferences the pointer. There is bunch of places that call it: kgdbts, init/main.c, extable, etc. 2) dereference_kernel_function_descriptor() A function to call on kernel symbols that does kernel .opd section address range test. 3) dereference_module_function_descriptor() A function to call on modules' symbols that does modules' .opd section address range test. [1] https://marc.info/?l=linux-kernel&m=150472969730573 Link: http://lkml.kernel.org/r/20171109234830.5067-2-sergey.senozhatsky@gmail.com To: Fenghua Yu <fenghua.yu@intel.com> To: Benjamin Herrenschmidt <benh@kernel.crashing.org> To: Paul Mackerras <paulus@samba.org> To: Michael Ellerman <mpe@ellerman.id.au> To: James Bottomley <jejb@parisc-linux.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linux-ia64@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Tested-by: Tony Luck <tony.luck@intel.com> #ia64 Tested-by: Santosh Sivaraj <santosh@fossix.org> #powerpc Tested-by: Helge Deller <deller@gmx.de> #parisc64 Signed-off-by: Petr Mladek <pmladek@suse.com>
2017-11-10 07:48:25 +08:00
* __start_opd, __end_opd
vmlinux.lds: add comments for global variables and clean up useless declarations The original goal of this patchset is to fix the bug reported by https://bugzilla.kernel.org/show_bug.cgi?id=53501 Now it has also been expanded to reduce common code used by memory initializion. Patch 1-7: 1) add comments for global variables exported by vmlinux.lds 2) normalize global variables exported by vmlinux.lds Patch 8: Introduce helper functions mem_init_print_info() and get_num_physpages() Patch 9: Avoid using global variable num_physpages at runtime Patch 10: Don't update num_physpages in memory_hotplug.c Patch 11-40: Modify arch mm initialization code to: 1) Simplify mem_init() by using mem_init_print_info() 2) Prepare for killing global variable num_physpages Patch 41: Kill the global variable num_physpages With all patches applied, mem_init(), free_initmem(), free_initrd_mem() could be as simple as below. This patch series has reduced about 1.2K lines of code in total. #ifndef CONFIG_DISCONTIGMEM void __init mem_init(void) { max_mapnr = max_low_pfn; free_all_bootmem(); high_memory = (void *) __va(max_low_pfn * PAGE_SIZE); mem_init_print_info(NULL); } #endif /* CONFIG_DISCONTIGMEM */ void free_initmem(void) { free_initmem_default(-1); } #ifdef CONFIG_BLK_DEV_INITRD void free_initrd_mem(unsigned long start, unsigned long end) { free_reserved_area(start, end, -1, "initrd"); } #endif Due to hardware resource limitations, I have only tested this on x86_64. And the messages reported on an x86_64 system are: Log message before applying patches: Memory: 7745676k/8910848k available (6934k kernel code, 836024k absent, 329148k reserved, 6343k data, 1012k init) Log message after applying patches: Memory: 7744624K/8074824K available (6969K kernel code, 1011K data, 2828K rodata, 1016K init, 9640K bss, 330200K reserved) Great thanks to Vineet Gupta for testing on ARC. This patch: Document global variables exported from vmlinux.lds. 1) Add comments about usage guidelines for global variables exported from vmlinux.lds.S. 2) Remove unused __initdata_begin[] and __initdata_end[]. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 06:03:33 +08:00
*/
extern char _text[], _stext[], _etext[];
extern char _data[], _sdata[], _edata[];
extern char __bss_start[], __bss_stop[];
extern char __init_begin[], __init_end[];
extern char _sinittext[], _einittext[];
extern char __start_ro_after_init[], __end_ro_after_init[];
extern char _end[];
extern char __per_cpu_load[], __per_cpu_start[], __per_cpu_end[];
extern char __kprobes_text_start[], __kprobes_text_end[];
x86: Separate out entry text section Put x86 entry code into a separate link section: .entry.text. Separating the entry text section seems to have performance benefits - caused by more efficient instruction cache usage. Running hackbench with perf stat --repeat showed that the change compresses the icache footprint. The icache load miss rate went down by about 15%: before patch: 19417627 L1-icache-load-misses ( +- 0.147% ) after patch: 16490788 L1-icache-load-misses ( +- 0.180% ) The motivation of the patch was to fix a particular kprobes bug that relates to the entry text section, the performance advantage was discovered accidentally. Whole perf output follows: - results for current tip tree: Performance counter stats for './hackbench/hackbench 10' (500 runs): 19417627 L1-icache-load-misses ( +- 0.147% ) 2676914223 instructions # 0.497 IPC ( +- 0.079% ) 5389516026 cycles ( +- 0.144% ) 0.206267711 seconds time elapsed ( +- 0.138% ) - results for current tip tree with the patch applied: Performance counter stats for './hackbench/hackbench 10' (500 runs): 16490788 L1-icache-load-misses ( +- 0.180% ) 2717734941 instructions # 0.502 IPC ( +- 0.079% ) 5414756975 cycles ( +- 0.148% ) 0.206747566 seconds time elapsed ( +- 0.137% ) Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: masami.hiramatsu.pt@hitachi.com Cc: ananth@in.ibm.com Cc: davem@davemloft.net Cc: 2nddept-manager@sdl.hitachi.co.jp LKML-Reference: <20110307181039.GB15197@jolsa.redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-08 02:10:39 +08:00
extern char __entry_text_start[], __entry_text_end[];
extern char __start_rodata[], __end_rodata[];
extern char __irqentry_text_start[], __irqentry_text_end[];
extern char __softirqentry_text_start[], __softirqentry_text_end[];
extern char __start_once[], __end_once[];
/* Start and end of .ctors section - used for constructor calls. */
extern char __ctors_start[], __ctors_end[];
sections: split dereference_function_descriptor() There are two format specifiers to print out a pointer in symbolic format: '%pS/%ps' and '%pF/%pf'. On most architectures, the two mean exactly the same thing, but some architectures (ia64, ppc64, parisc64) use an indirect pointer for C function pointers, where the function pointer points to a function descriptor (which in turn contains the actual pointer to the code). The '%pF/%pf, when used appropriately, automatically does the appropriate function descriptor dereference on such architectures. The "when used appropriately" part is tricky. Basically this is a subtle ABI detail, specific to some platforms, that made it to the API level and people can be unaware of it and miss the whole "we need to dereference the function" business out. [1] proves that point (note that it fixes only '%pF' and '%pS', there might be '%pf' and '%ps' cases as well). It appears that we can handle everything within the affected arches and make '%pS/%ps' smart enough to retire '%pF/%pf'. Function descriptors live in .opd elf section and all affected arches (ia64, ppc64, parisc64) handle it properly for kernel and modules. So we, technically, can decide if the dereference is needed by simply looking at the pointer: if it belongs to .opd section then we need to dereference it. The kernel and modules have their own .opd sections, obviously, that's why we need to split dereference_function_descriptor() and use separate kernel and module dereference arch callbacks. This patch does the first step, it a) adds dereference_kernel_function_descriptor() function. b) adds a weak alias to dereference_module_function_descriptor() function. So, for the time being, we will have: 1) dereference_function_descriptor() A generic function, that simply dereferences the pointer. There is bunch of places that call it: kgdbts, init/main.c, extable, etc. 2) dereference_kernel_function_descriptor() A function to call on kernel symbols that does kernel .opd section address range test. 3) dereference_module_function_descriptor() A function to call on modules' symbols that does modules' .opd section address range test. [1] https://marc.info/?l=linux-kernel&m=150472969730573 Link: http://lkml.kernel.org/r/20171109234830.5067-2-sergey.senozhatsky@gmail.com To: Fenghua Yu <fenghua.yu@intel.com> To: Benjamin Herrenschmidt <benh@kernel.crashing.org> To: Paul Mackerras <paulus@samba.org> To: Michael Ellerman <mpe@ellerman.id.au> To: James Bottomley <jejb@parisc-linux.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linux-ia64@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Tested-by: Tony Luck <tony.luck@intel.com> #ia64 Tested-by: Santosh Sivaraj <santosh@fossix.org> #powerpc Tested-by: Helge Deller <deller@gmx.de> #parisc64 Signed-off-by: Petr Mladek <pmladek@suse.com>
2017-11-10 07:48:25 +08:00
/* Start and end of .opd section - used for function descriptors. */
extern char __start_opd[], __end_opd[];
/* Start and end of instrumentation protected text section */
extern char __noinstr_text_start[], __noinstr_text_end[];
extern __visible const void __nosave_begin, __nosave_end;
sections: split dereference_function_descriptor() There are two format specifiers to print out a pointer in symbolic format: '%pS/%ps' and '%pF/%pf'. On most architectures, the two mean exactly the same thing, but some architectures (ia64, ppc64, parisc64) use an indirect pointer for C function pointers, where the function pointer points to a function descriptor (which in turn contains the actual pointer to the code). The '%pF/%pf, when used appropriately, automatically does the appropriate function descriptor dereference on such architectures. The "when used appropriately" part is tricky. Basically this is a subtle ABI detail, specific to some platforms, that made it to the API level and people can be unaware of it and miss the whole "we need to dereference the function" business out. [1] proves that point (note that it fixes only '%pF' and '%pS', there might be '%pf' and '%ps' cases as well). It appears that we can handle everything within the affected arches and make '%pS/%ps' smart enough to retire '%pF/%pf'. Function descriptors live in .opd elf section and all affected arches (ia64, ppc64, parisc64) handle it properly for kernel and modules. So we, technically, can decide if the dereference is needed by simply looking at the pointer: if it belongs to .opd section then we need to dereference it. The kernel and modules have their own .opd sections, obviously, that's why we need to split dereference_function_descriptor() and use separate kernel and module dereference arch callbacks. This patch does the first step, it a) adds dereference_kernel_function_descriptor() function. b) adds a weak alias to dereference_module_function_descriptor() function. So, for the time being, we will have: 1) dereference_function_descriptor() A generic function, that simply dereferences the pointer. There is bunch of places that call it: kgdbts, init/main.c, extable, etc. 2) dereference_kernel_function_descriptor() A function to call on kernel symbols that does kernel .opd section address range test. 3) dereference_module_function_descriptor() A function to call on modules' symbols that does modules' .opd section address range test. [1] https://marc.info/?l=linux-kernel&m=150472969730573 Link: http://lkml.kernel.org/r/20171109234830.5067-2-sergey.senozhatsky@gmail.com To: Fenghua Yu <fenghua.yu@intel.com> To: Benjamin Herrenschmidt <benh@kernel.crashing.org> To: Paul Mackerras <paulus@samba.org> To: Michael Ellerman <mpe@ellerman.id.au> To: James Bottomley <jejb@parisc-linux.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jessica Yu <jeyu@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linux-ia64@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Tested-by: Tony Luck <tony.luck@intel.com> #ia64 Tested-by: Santosh Sivaraj <santosh@fossix.org> #powerpc Tested-by: Helge Deller <deller@gmx.de> #parisc64 Signed-off-by: Petr Mladek <pmladek@suse.com>
2017-11-10 07:48:25 +08:00
/* Function descriptor handling (if any). Override in asm/sections.h */
#ifdef CONFIG_HAVE_FUNCTION_DESCRIPTORS
void *dereference_function_descriptor(void *ptr);
void *dereference_kernel_function_descriptor(void *ptr);
#else
#define dereference_function_descriptor(p) ((void *)(p))
#define dereference_kernel_function_descriptor(p) ((void *)(p))
/* An address is simply the address of the function. */
typedef struct {
unsigned long addr;
} func_desc_t;
#endif
static inline bool have_function_descriptors(void)
{
return IS_ENABLED(CONFIG_HAVE_FUNCTION_DESCRIPTORS);
}
/**
* memory_contains - checks if an object is contained within a memory region
* @begin: virtual address of the beginning of the memory region
* @end: virtual address of the end of the memory region
* @virt: virtual address of the memory object
* @size: size of the memory object
*
* Returns: true if the object specified by @virt and @size is entirely
* contained within the memory region defined by @begin and @end, false
* otherwise.
*/
static inline bool memory_contains(void *begin, void *end, void *virt,
size_t size)
{
return virt >= begin && virt + size <= end;
}
/**
* memory_intersects - checks if the region occupied by an object intersects
* with another memory region
asm-generic: sections: refactor memory_intersects There are two problems with the current code of memory_intersects: First, it doesn't check whether the region (begin, end) falls inside the region (virt, vend), that is (virt < begin && vend > end). The second problem is if vend is equal to begin, it will return true but this is wrong since vend (virt + size) is not the last address of the memory region but (virt + size -1) is. The wrong determination will trigger the misreporting when the function check_for_illegal_area calls memory_intersects to check if the dma region intersects with stext region. The misreporting is as below (stext is at 0x80100000): WARNING: CPU: 0 PID: 77 at kernel/dma/debug.c:1073 check_for_illegal_area+0x130/0x168 DMA-API: chipidea-usb2 e0002000.usb: device driver maps memory from kernel text or rodata [addr=800f0000] [len=65536] Modules linked in: CPU: 1 PID: 77 Comm: usb-storage Not tainted 5.19.0-yocto-standard #5 Hardware name: Xilinx Zynq Platform unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x58/0x70 dump_stack_lvl from __warn+0xb0/0x198 __warn from warn_slowpath_fmt+0x80/0xb4 warn_slowpath_fmt from check_for_illegal_area+0x130/0x168 check_for_illegal_area from debug_dma_map_sg+0x94/0x368 debug_dma_map_sg from __dma_map_sg_attrs+0x114/0x128 __dma_map_sg_attrs from dma_map_sg_attrs+0x18/0x24 dma_map_sg_attrs from usb_hcd_map_urb_for_dma+0x250/0x3b4 usb_hcd_map_urb_for_dma from usb_hcd_submit_urb+0x194/0x214 usb_hcd_submit_urb from usb_sg_wait+0xa4/0x118 usb_sg_wait from usb_stor_bulk_transfer_sglist+0xa0/0xec usb_stor_bulk_transfer_sglist from usb_stor_bulk_srb+0x38/0x70 usb_stor_bulk_srb from usb_stor_Bulk_transport+0x150/0x360 usb_stor_Bulk_transport from usb_stor_invoke_transport+0x38/0x440 usb_stor_invoke_transport from usb_stor_control_thread+0x1e0/0x238 usb_stor_control_thread from kthread+0xf8/0x104 kthread from ret_from_fork+0x14/0x2c Refactor memory_intersects to fix the two problems above. Before the 1d7db834a027e ("dma-debug: use memory_intersects() directly"), memory_intersects is called only by printk_late_init: printk_late_init -> init_section_intersects ->memory_intersects. There were few places where memory_intersects was called. When commit 1d7db834a027e ("dma-debug: use memory_intersects() directly") was merged and CONFIG_DMA_API_DEBUG is enabled, the DMA subsystem uses it to check for an illegal area and the calltrace above is triggered. [akpm@linux-foundation.org: fix nearby comment typo] Link: https://lkml.kernel.org/r/20220819081145.948016-1-quanyang.wang@windriver.com Fixes: 979559362516 ("asm/sections: add helpers to check for section data") Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thierry Reding <treding@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-19 16:11:45 +08:00
* @begin: virtual address of the beginning of the memory region
* @end: virtual address of the end of the memory region
* @virt: virtual address of the memory object
* @size: size of the memory object
*
* Returns: true if an object's memory region, specified by @virt and @size,
* intersects with the region specified by @begin and @end, false otherwise.
*/
static inline bool memory_intersects(void *begin, void *end, void *virt,
size_t size)
{
void *vend = virt + size;
asm-generic: sections: refactor memory_intersects There are two problems with the current code of memory_intersects: First, it doesn't check whether the region (begin, end) falls inside the region (virt, vend), that is (virt < begin && vend > end). The second problem is if vend is equal to begin, it will return true but this is wrong since vend (virt + size) is not the last address of the memory region but (virt + size -1) is. The wrong determination will trigger the misreporting when the function check_for_illegal_area calls memory_intersects to check if the dma region intersects with stext region. The misreporting is as below (stext is at 0x80100000): WARNING: CPU: 0 PID: 77 at kernel/dma/debug.c:1073 check_for_illegal_area+0x130/0x168 DMA-API: chipidea-usb2 e0002000.usb: device driver maps memory from kernel text or rodata [addr=800f0000] [len=65536] Modules linked in: CPU: 1 PID: 77 Comm: usb-storage Not tainted 5.19.0-yocto-standard #5 Hardware name: Xilinx Zynq Platform unwind_backtrace from show_stack+0x18/0x1c show_stack from dump_stack_lvl+0x58/0x70 dump_stack_lvl from __warn+0xb0/0x198 __warn from warn_slowpath_fmt+0x80/0xb4 warn_slowpath_fmt from check_for_illegal_area+0x130/0x168 check_for_illegal_area from debug_dma_map_sg+0x94/0x368 debug_dma_map_sg from __dma_map_sg_attrs+0x114/0x128 __dma_map_sg_attrs from dma_map_sg_attrs+0x18/0x24 dma_map_sg_attrs from usb_hcd_map_urb_for_dma+0x250/0x3b4 usb_hcd_map_urb_for_dma from usb_hcd_submit_urb+0x194/0x214 usb_hcd_submit_urb from usb_sg_wait+0xa4/0x118 usb_sg_wait from usb_stor_bulk_transfer_sglist+0xa0/0xec usb_stor_bulk_transfer_sglist from usb_stor_bulk_srb+0x38/0x70 usb_stor_bulk_srb from usb_stor_Bulk_transport+0x150/0x360 usb_stor_Bulk_transport from usb_stor_invoke_transport+0x38/0x440 usb_stor_invoke_transport from usb_stor_control_thread+0x1e0/0x238 usb_stor_control_thread from kthread+0xf8/0x104 kthread from ret_from_fork+0x14/0x2c Refactor memory_intersects to fix the two problems above. Before the 1d7db834a027e ("dma-debug: use memory_intersects() directly"), memory_intersects is called only by printk_late_init: printk_late_init -> init_section_intersects ->memory_intersects. There were few places where memory_intersects was called. When commit 1d7db834a027e ("dma-debug: use memory_intersects() directly") was merged and CONFIG_DMA_API_DEBUG is enabled, the DMA subsystem uses it to check for an illegal area and the calltrace above is triggered. [akpm@linux-foundation.org: fix nearby comment typo] Link: https://lkml.kernel.org/r/20220819081145.948016-1-quanyang.wang@windriver.com Fixes: 979559362516 ("asm/sections: add helpers to check for section data") Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Thierry Reding <treding@nvidia.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-08-19 16:11:45 +08:00
if (virt < end && vend > begin)
return true;
return false;
}
/**
* init_section_contains - checks if an object is contained within the init
* section
* @virt: virtual address of the memory object
* @size: size of the memory object
*
* Returns: true if the object specified by @virt and @size is entirely
* contained within the init section, false otherwise.
*/
static inline bool init_section_contains(void *virt, size_t size)
{
return memory_contains(__init_begin, __init_end, virt, size);
}
/**
* init_section_intersects - checks if the region occupied by an object
* intersects with the init section
* @virt: virtual address of the memory object
* @size: size of the memory object
*
* Returns: true if an object's memory region, specified by @virt and @size,
* intersects with the init section, false otherwise.
*/
static inline bool init_section_intersects(void *virt, size_t size)
{
return memory_intersects(__init_begin, __init_end, virt, size);
}
/**
* is_kernel_core_data - checks if the pointer address is located in the
* .data or .bss section
*
* @addr: address to check
*
* Returns: true if the address is located in .data or .bss, false otherwise.
* Note: On some archs it may return true for core RODATA, and false
* for others. But will always be true for core RW data.
*/
static inline bool is_kernel_core_data(unsigned long addr)
{
if (addr >= (unsigned long)_sdata && addr < (unsigned long)_edata)
return true;
if (addr >= (unsigned long)__bss_start &&
addr < (unsigned long)__bss_stop)
return true;
return false;
}
/**
* is_kernel_rodata - checks if the pointer address is located in the
* .rodata section
*
* @addr: address to check
*
* Returns: true if the address is located in .rodata, false otherwise.
*/
static inline bool is_kernel_rodata(unsigned long addr)
{
return addr >= (unsigned long)__start_rodata &&
addr < (unsigned long)__end_rodata;
}
/**
* is_kernel_inittext - checks if the pointer address is located in the
* .init.text section
*
* @addr: address to check
*
* Returns: true if the address is located in .init.text, false otherwise.
*/
static inline bool is_kernel_inittext(unsigned long addr)
{
return addr >= (unsigned long)_sinittext &&
addr < (unsigned long)_einittext;
}
/**
* __is_kernel_text - checks if the pointer address is located in the
* .text section
*
* @addr: address to check
*
* Returns: true if the address is located in .text, false otherwise.
* Note: an internal helper, only check the range of _stext to _etext.
*/
static inline bool __is_kernel_text(unsigned long addr)
{
return addr >= (unsigned long)_stext &&
addr < (unsigned long)_etext;
}
/**
* __is_kernel - checks if the pointer address is located in the kernel range
*
* @addr: address to check
*
* Returns: true if the address is located in the kernel range, false otherwise.
* Note: an internal helper, check the range of _stext to _end,
* and range from __init_begin to __init_end, which can be outside
* of the _stext to _end range.
*/
static inline bool __is_kernel(unsigned long addr)
{
return ((addr >= (unsigned long)_stext &&
addr < (unsigned long)_end) ||
(addr >= (unsigned long)__init_begin &&
addr < (unsigned long)__init_end));
}
#endif /* _ASM_GENERIC_SECTIONS_H_ */