UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/arch/powerpc/mm/mmu_decl.h

166 lines
4.7 KiB
C
Raw Normal View History

powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 14:04:21 +08:00
/*
* Declarations of procedures and variables shared between files
* in arch/ppc/mm/.
*
* Derived from arch/ppc/mm/init.c:
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
*
* Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
* and Cort Dougan (PReP) (cort@cs.nmt.edu)
* Copyright (C) 1996 Paul Mackerras
*
* Derived from "arch/i386/mm/init.c"
* Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
*/
[POWERPC] Cleanup and fix breakage in tlbflush.h BenH's commit a741e67969577163a4cfc78d7fd2753219087ef1 in powerpc.git, although (AFAICT) only intended to affect ppc64, also has side-effects which break 44x. I think 40x, 8xx and Freescale Book E are also affected, though I haven't tested them. The problem lies in unconditionally removing flush_tlb_pending() from the versions of flush_tlb_mm(), flush_tlb_range() and flush_tlb_kernel_range() used on ppc64 - which are also used the embedded platforms mentioned above. The patch below cleans up the convoluted #ifdef logic in tlbflush.h, in the process restoring the necessary flushes for the software TLB platforms. There are three sets of definitions for the flushing hooks: the software TLB versions (revised to avoid using names which appear to related to TLB batching), the 32-bit hash based versions (external functions) amd the 64-bit hash based versions (which implement batching). It also moves the declaration of update_mmu_cache() to always be in tlbflush.h (previously it was in tlbflush.h except for PPC64, where it was in pgtable.h). Booted on Ebony (440GP) and compiled for 64-bit and 32-bit multiplatform. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-24 11:09:12 +08:00
#include <linux/mm.h>
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 14:04:21 +08:00
#include <asm/tlbflush.h>
#include <asm/mmu.h>
powerpc/mm: Split low level tlb invalidate for nohash processors Currently, the various forms of low level TLB invalidations are all implemented in misc_32.S for 32-bit processors, in a fairly scary mess of #ifdef's and with interesting duplication such as a whole bunch of code for FSL _tlbie and _tlbia which are no longer used. This moves things around such that _tlbie is now defined in hash_low_32.S and is only used by the 32-bit hash code, and all nohash CPUs use the various _tlbil_* forms that are now moved to a new file, tlb_nohash_low.S. I moved all the definitions for that stuff out of include/asm/tlbflush.h as they are really internal mm stuff, into mm/mmu_decl.h The code should have no functional changes. I kept some variants inline for trivial forms on things like 40x and 8xx. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-19 03:13:42 +08:00
#ifdef CONFIG_PPC_MMU_NOHASH
/*
* On 40x and 8xx, we directly inline tlbia and tlbivax
*/
#if defined(CONFIG_40x) || defined(CONFIG_8xx)
static inline void _tlbil_all(void)
{
powerpc: Fix missing semicolons in mmu_decl.h This is a brown paper bag from one of my earlier patches that breaks build on 40x and 8xx. And yes, I've now added 40x and 8xx to my list of test configs :-) Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-07 01:56:51 +08:00
asm volatile ("sync; tlbia; isync" : : : "memory");
powerpc/mm: Split low level tlb invalidate for nohash processors Currently, the various forms of low level TLB invalidations are all implemented in misc_32.S for 32-bit processors, in a fairly scary mess of #ifdef's and with interesting duplication such as a whole bunch of code for FSL _tlbie and _tlbia which are no longer used. This moves things around such that _tlbie is now defined in hash_low_32.S and is only used by the 32-bit hash code, and all nohash CPUs use the various _tlbil_* forms that are now moved to a new file, tlb_nohash_low.S. I moved all the definitions for that stuff out of include/asm/tlbflush.h as they are really internal mm stuff, into mm/mmu_decl.h The code should have no functional changes. I kept some variants inline for trivial forms on things like 40x and 8xx. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-19 03:13:42 +08:00
}
static inline void _tlbil_pid(unsigned int pid)
{
powerpc: Fix missing semicolons in mmu_decl.h This is a brown paper bag from one of my earlier patches that breaks build on 40x and 8xx. And yes, I've now added 40x and 8xx to my list of test configs :-) Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-07 01:56:51 +08:00
asm volatile ("sync; tlbia; isync" : : : "memory");
powerpc/mm: Split low level tlb invalidate for nohash processors Currently, the various forms of low level TLB invalidations are all implemented in misc_32.S for 32-bit processors, in a fairly scary mess of #ifdef's and with interesting duplication such as a whole bunch of code for FSL _tlbie and _tlbia which are no longer used. This moves things around such that _tlbie is now defined in hash_low_32.S and is only used by the 32-bit hash code, and all nohash CPUs use the various _tlbil_* forms that are now moved to a new file, tlb_nohash_low.S. I moved all the definitions for that stuff out of include/asm/tlbflush.h as they are really internal mm stuff, into mm/mmu_decl.h The code should have no functional changes. I kept some variants inline for trivial forms on things like 40x and 8xx. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-19 03:13:42 +08:00
}
powerpc/mm: Make low level TLB flush ops on BookE take additional args We need to pass down whether the page is direct or indirect and we'll need to pass the page size to _tlbil_va and _tlbivax_bcast We also add a new low level _tlbil_pid_noind() which does a TLB flush by PID but avoids flushing indirect entries if possible This implements those new prototypes but defines them with inlines or macros so that no additional arguments are actually passed on current processors. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-07-24 07:15:24 +08:00
#define _tlbil_pid_noind(pid) _tlbil_pid(pid)
powerpc/mm: Split low level tlb invalidate for nohash processors Currently, the various forms of low level TLB invalidations are all implemented in misc_32.S for 32-bit processors, in a fairly scary mess of #ifdef's and with interesting duplication such as a whole bunch of code for FSL _tlbie and _tlbia which are no longer used. This moves things around such that _tlbie is now defined in hash_low_32.S and is only used by the 32-bit hash code, and all nohash CPUs use the various _tlbil_* forms that are now moved to a new file, tlb_nohash_low.S. I moved all the definitions for that stuff out of include/asm/tlbflush.h as they are really internal mm stuff, into mm/mmu_decl.h The code should have no functional changes. I kept some variants inline for trivial forms on things like 40x and 8xx. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-19 03:13:42 +08:00
#else /* CONFIG_40x || CONFIG_8xx */
extern void _tlbil_all(void);
extern void _tlbil_pid(unsigned int pid);
powerpc: Add TLB management code for 64-bit Book3E This adds the TLB miss handler assembly, the low level TLB flush routines along with the necessary hook for dealing with our virtual page tables or indirect TLB entries that need to be flushes when PTE pages are freed. There is currently no support for hugetlbfs Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-07-24 07:15:47 +08:00
#ifdef CONFIG_PPC_BOOK3E
extern void _tlbil_pid_noind(unsigned int pid);
#else
powerpc/mm: Make low level TLB flush ops on BookE take additional args We need to pass down whether the page is direct or indirect and we'll need to pass the page size to _tlbil_va and _tlbivax_bcast We also add a new low level _tlbil_pid_noind() which does a TLB flush by PID but avoids flushing indirect entries if possible This implements those new prototypes but defines them with inlines or macros so that no additional arguments are actually passed on current processors. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-07-24 07:15:24 +08:00
#define _tlbil_pid_noind(pid) _tlbil_pid(pid)
powerpc: Add TLB management code for 64-bit Book3E This adds the TLB miss handler assembly, the low level TLB flush routines along with the necessary hook for dealing with our virtual page tables or indirect TLB entries that need to be flushes when PTE pages are freed. There is currently no support for hugetlbfs Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-07-24 07:15:47 +08:00
#endif
powerpc/mm: Split low level tlb invalidate for nohash processors Currently, the various forms of low level TLB invalidations are all implemented in misc_32.S for 32-bit processors, in a fairly scary mess of #ifdef's and with interesting duplication such as a whole bunch of code for FSL _tlbie and _tlbia which are no longer used. This moves things around such that _tlbie is now defined in hash_low_32.S and is only used by the 32-bit hash code, and all nohash CPUs use the various _tlbil_* forms that are now moved to a new file, tlb_nohash_low.S. I moved all the definitions for that stuff out of include/asm/tlbflush.h as they are really internal mm stuff, into mm/mmu_decl.h The code should have no functional changes. I kept some variants inline for trivial forms on things like 40x and 8xx. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-19 03:13:42 +08:00
#endif /* !(CONFIG_40x || CONFIG_8xx) */
/*
* On 8xx, we directly inline tlbie, on others, it's extern
*/
#ifdef CONFIG_8xx
powerpc/mm: Make low level TLB flush ops on BookE take additional args We need to pass down whether the page is direct or indirect and we'll need to pass the page size to _tlbil_va and _tlbivax_bcast We also add a new low level _tlbil_pid_noind() which does a TLB flush by PID but avoids flushing indirect entries if possible This implements those new prototypes but defines them with inlines or macros so that no additional arguments are actually passed on current processors. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-07-24 07:15:24 +08:00
static inline void _tlbil_va(unsigned long address, unsigned int pid,
unsigned int tsize, unsigned int ind)
powerpc/mm: Split low level tlb invalidate for nohash processors Currently, the various forms of low level TLB invalidations are all implemented in misc_32.S for 32-bit processors, in a fairly scary mess of #ifdef's and with interesting duplication such as a whole bunch of code for FSL _tlbie and _tlbia which are no longer used. This moves things around such that _tlbie is now defined in hash_low_32.S and is only used by the 32-bit hash code, and all nohash CPUs use the various _tlbil_* forms that are now moved to a new file, tlb_nohash_low.S. I moved all the definitions for that stuff out of include/asm/tlbflush.h as they are really internal mm stuff, into mm/mmu_decl.h The code should have no functional changes. I kept some variants inline for trivial forms on things like 40x and 8xx. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-19 03:13:42 +08:00
{
powerpc: Fix missing semicolons in mmu_decl.h This is a brown paper bag from one of my earlier patches that breaks build on 40x and 8xx. And yes, I've now added 40x and 8xx to my list of test configs :-) Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-07 01:56:51 +08:00
asm volatile ("tlbie %0; sync" : : "r" (address) : "memory");
powerpc/mm: Split low level tlb invalidate for nohash processors Currently, the various forms of low level TLB invalidations are all implemented in misc_32.S for 32-bit processors, in a fairly scary mess of #ifdef's and with interesting duplication such as a whole bunch of code for FSL _tlbie and _tlbia which are no longer used. This moves things around such that _tlbie is now defined in hash_low_32.S and is only used by the 32-bit hash code, and all nohash CPUs use the various _tlbil_* forms that are now moved to a new file, tlb_nohash_low.S. I moved all the definitions for that stuff out of include/asm/tlbflush.h as they are really internal mm stuff, into mm/mmu_decl.h The code should have no functional changes. I kept some variants inline for trivial forms on things like 40x and 8xx. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-19 03:13:42 +08:00
}
powerpc: Add TLB management code for 64-bit Book3E This adds the TLB miss handler assembly, the low level TLB flush routines along with the necessary hook for dealing with our virtual page tables or indirect TLB entries that need to be flushes when PTE pages are freed. There is currently no support for hugetlbfs Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-07-24 07:15:47 +08:00
#elif defined(CONFIG_PPC_BOOK3E)
extern void _tlbil_va(unsigned long address, unsigned int pid,
unsigned int tsize, unsigned int ind);
#else
powerpc/mm: Make low level TLB flush ops on BookE take additional args We need to pass down whether the page is direct or indirect and we'll need to pass the page size to _tlbil_va and _tlbivax_bcast We also add a new low level _tlbil_pid_noind() which does a TLB flush by PID but avoids flushing indirect entries if possible This implements those new prototypes but defines them with inlines or macros so that no additional arguments are actually passed on current processors. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-07-24 07:15:24 +08:00
extern void __tlbil_va(unsigned long address, unsigned int pid);
static inline void _tlbil_va(unsigned long address, unsigned int pid,
unsigned int tsize, unsigned int ind)
{
__tlbil_va(address, pid);
}
powerpc: Fix comment typo 'CONIFG_8xx' Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-27 01:49:12 +08:00
#endif /* CONFIG_8xx */
powerpc/mm: Split low level tlb invalidate for nohash processors Currently, the various forms of low level TLB invalidations are all implemented in misc_32.S for 32-bit processors, in a fairly scary mess of #ifdef's and with interesting duplication such as a whole bunch of code for FSL _tlbie and _tlbia which are no longer used. This moves things around such that _tlbie is now defined in hash_low_32.S and is only used by the 32-bit hash code, and all nohash CPUs use the various _tlbil_* forms that are now moved to a new file, tlb_nohash_low.S. I moved all the definitions for that stuff out of include/asm/tlbflush.h as they are really internal mm stuff, into mm/mmu_decl.h The code should have no functional changes. I kept some variants inline for trivial forms on things like 40x and 8xx. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-19 03:13:42 +08:00
powerpc/47x: Base ppc476 support This patch adds the base support for the 476 processor. The code was primarily written by Ben Herrenschmidt and Torez Smith, but I've been maintaining it for a while. The goal is to have a single binary that will run on 44x and 47x, but we still have some details to work out. The biggest is that the L1 cache line size differs on the two platforms, but it's currently a compile-time option. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Torez Smith <lnxtorez@linux.vnet.ibm.com> Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2010-03-05 18:43:12 +08:00
#if defined(CONFIG_PPC_BOOK3E) || defined(CONFIG_PPC_47x)
powerpc: Add TLB management code for 64-bit Book3E This adds the TLB miss handler assembly, the low level TLB flush routines along with the necessary hook for dealing with our virtual page tables or indirect TLB entries that need to be flushes when PTE pages are freed. There is currently no support for hugetlbfs Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-07-24 07:15:47 +08:00
extern void _tlbivax_bcast(unsigned long address, unsigned int pid,
unsigned int tsize, unsigned int ind);
#else
powerpc/mm: Make low level TLB flush ops on BookE take additional args We need to pass down whether the page is direct or indirect and we'll need to pass the page size to _tlbil_va and _tlbivax_bcast We also add a new low level _tlbil_pid_noind() which does a TLB flush by PID but avoids flushing indirect entries if possible This implements those new prototypes but defines them with inlines or macros so that no additional arguments are actually passed on current processors. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-07-24 07:15:24 +08:00
static inline void _tlbivax_bcast(unsigned long address, unsigned int pid,
unsigned int tsize, unsigned int ind)
powerpc/mm: Split low level tlb invalidate for nohash processors Currently, the various forms of low level TLB invalidations are all implemented in misc_32.S for 32-bit processors, in a fairly scary mess of #ifdef's and with interesting duplication such as a whole bunch of code for FSL _tlbie and _tlbia which are no longer used. This moves things around such that _tlbie is now defined in hash_low_32.S and is only used by the 32-bit hash code, and all nohash CPUs use the various _tlbil_* forms that are now moved to a new file, tlb_nohash_low.S. I moved all the definitions for that stuff out of include/asm/tlbflush.h as they are really internal mm stuff, into mm/mmu_decl.h The code should have no functional changes. I kept some variants inline for trivial forms on things like 40x and 8xx. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-19 03:13:42 +08:00
{
BUG();
}
powerpc: Add TLB management code for 64-bit Book3E This adds the TLB miss handler assembly, the low level TLB flush routines along with the necessary hook for dealing with our virtual page tables or indirect TLB entries that need to be flushes when PTE pages are freed. There is currently no support for hugetlbfs Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-07-24 07:15:47 +08:00
#endif
powerpc/mm: Split low level tlb invalidate for nohash processors Currently, the various forms of low level TLB invalidations are all implemented in misc_32.S for 32-bit processors, in a fairly scary mess of #ifdef's and with interesting duplication such as a whole bunch of code for FSL _tlbie and _tlbia which are no longer used. This moves things around such that _tlbie is now defined in hash_low_32.S and is only used by the 32-bit hash code, and all nohash CPUs use the various _tlbil_* forms that are now moved to a new file, tlb_nohash_low.S. I moved all the definitions for that stuff out of include/asm/tlbflush.h as they are really internal mm stuff, into mm/mmu_decl.h The code should have no functional changes. I kept some variants inline for trivial forms on things like 40x and 8xx. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-19 03:13:42 +08:00
#else /* CONFIG_PPC_MMU_NOHASH */
[POWERPC] Fix 32-bit mm operations when not using BATs On hash table based 32 bits powerpc's, the hash management code runs with a big spinlock. It's thus important that it never causes itself a hash fault. That code is generally safe (it does memory accesses in real mode among other things) with the exception of the actual access to the code itself. That is, the kernel text needs to be accessible without taking a hash miss exceptions. This is currently guaranteed by having a BAT register mapping part of the linear mapping permanently, which includes the kernel text. But this is not true if using the "nobats" kernel command line option (which can be useful for debugging) and will not be true when using DEBUG_PAGEALLOC implemented in a subsequent patch. This patch fixes this by pre-faulting in the hash table pages that hit the kernel text, and making sure we never evict such a page under hash pressure. Signed-off-by: Benjamin Herrenchmidt <benh@kernel.crashing.org> arch/powerpc/mm/hash_low_32.S | 22 ++++++++++++++++++++-- arch/powerpc/mm/mem.c | 3 --- arch/powerpc/mm/mmu_decl.h | 4 ++++ arch/powerpc/mm/pgtable_32.c | 11 +++++++---- 4 files changed, 31 insertions(+), 9 deletions(-) Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-12 13:30:22 +08:00
extern void hash_preload(struct mm_struct *mm, unsigned long ea,
unsigned long access, unsigned long trap);
powerpc/mm: Split low level tlb invalidate for nohash processors Currently, the various forms of low level TLB invalidations are all implemented in misc_32.S for 32-bit processors, in a fairly scary mess of #ifdef's and with interesting duplication such as a whole bunch of code for FSL _tlbie and _tlbia which are no longer used. This moves things around such that _tlbie is now defined in hash_low_32.S and is only used by the 32-bit hash code, and all nohash CPUs use the various _tlbil_* forms that are now moved to a new file, tlb_nohash_low.S. I moved all the definitions for that stuff out of include/asm/tlbflush.h as they are really internal mm stuff, into mm/mmu_decl.h The code should have no functional changes. I kept some variants inline for trivial forms on things like 40x and 8xx. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-12-19 03:13:42 +08:00
extern void _tlbie(unsigned long address);
extern void _tlbia(void);
#endif /* CONFIG_PPC_MMU_NOHASH */
powerpc: Merge arch/ppc64/mm to arch/powerpc/mm This moves the remaining files in arch/ppc64/mm to arch/powerpc/mm, and arranges that we use them when compiling with ARCH=ppc64. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 19:58:35 +08:00
#ifdef CONFIG_PPC32
powerpc/fsl-booke: Don't hard-code size of struct tlbcam Some assembly code in head_fsl_booke.S hard-coded the size of struct tlbcam to 20 when it indexed the TLBCAM table. Anyone changing the size of struct tlbcam would not know to expect that. The kernel already has a system to get the size of C structures into assembly language files, asm-offsets, so let's use it. The definition of the struct gets moved to a header, so that asm-offsets.c can include it. Signed-off-by: Trent Piepho <tpiepho@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-12-09 11:34:55 +08:00
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 14:04:21 +08:00
extern void mapin_ram(void);
extern int map_page(unsigned long va, phys_addr_t pa, int flags);
powerpc: Change BAT code to use phys_addr_t Currently, the physical address is an unsigned long, but it should be phys_addr_t in set_bat, [v/p]_mapped_by_bat. Also, create a macro that can convert a large physical address into the correct format for programming the BAT registers. Signed-off-by: Becky Bruce <becky.bruce@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-06-14 07:41:42 +08:00
extern void setbat(int index, unsigned long virt, phys_addr_t phys,
powerpc/mm: Change setbat() to take a pgprot_t rather than flags The callers of setbat() are actually passing a pgprot_t for the flags parameter. This doesn't matter unless STRICT_MM_TYPECHECKS is enabled. So we can turn that on without breaking the build, change setbat() to take a pgprot_t and have it convert it to an unsigned long internally. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-03-25 17:11:55 +08:00
unsigned int size, pgprot_t prot);
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 14:04:21 +08:00
extern int __map_without_bats;
powerpc: allow ioremap within reserved memory regions Add a flag to let a platform ioremap memory regions marked as reserved. This flag will be used later by the Nintendo Wii support code to allow ioremapping the I/O region sitting between MEM1 and MEM2 and marked as reserved RAM in the patch "wii: use both mem1 and mem2 as ram". This will no longer be needed when proper discontig memory support for 32-bit PowerPC is added to the kernel. Signed-off-by: Albert Herranz <albert_herranz@yahoo.es> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-12 14:31:54 +08:00
extern int __allow_ioremap_reserved;
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 14:04:21 +08:00
extern unsigned int rtas_data, rtas_size;
[POWERPC] Kill typedef-ed structs for hash PTEs and BATs Using typedefs to rename structure types if frowned on by CodingStyle. However, we do so for the hash PTE structure on both ppc32 (where it's called "PTE") and ppc64 (where it's called "hpte_t"). On ppc32 we also have such a typedef for the BATs ("BAT"). This removes this unhelpful use of typedefs, in the process bringing ppc32 and ppc64 closer together, by using the name "struct hash_pte" in both cases. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-13 12:52:56 +08:00
struct hash_pte;
extern struct hash_pte *Hash, *Hash_end;
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 14:04:21 +08:00
extern unsigned long Hash_size, Hash_mask;
powerpc/mm: Add support for SPARSEMEM_VMEMMAP on 64-bit Book3E The base TLB support didn't include support for SPARSEMEM_VMEMMAP, though we did carve out some virtual space for it, the necessary support code wasn't there. This implements it by using 16M pages for now, though the page size could easily be changed at runtime if necessary. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-07-24 07:15:58 +08:00
#endif /* CONFIG_PPC32 */
[PATCH] powerpc: Remove imalloc.h asm-ppc64/imalloc.h is only included from files in arch/powerpc/mm. We already have a header for mm local definitions, arch/powerpc/mm/mmu_decl.h. Thus, this patch moves the contents of imalloc.h into mmu_decl.h. The only exception are the definitions of PHBS_IO_BASE, IMALLOC_BASE and IMALLOC_END. Those are moved into pgtable.h, next to similar definitions of VMALLOC_START and VMALLOC_SIZE. Built for multiplatform 32bit and 64bit (ARCH=powerpc). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-16 12:43:48 +08:00
extern unsigned long ioremap_bot;
powerpc: Merge arch/ppc64/mm to arch/powerpc/mm This moves the remaining files in arch/ppc64/mm to arch/powerpc/mm, and arranges that we use them when compiling with ARCH=ppc64. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 19:58:35 +08:00
extern unsigned long __max_low_memory;
[POWERPC] Rename __initial_memory_limit to __initial_memory_limit_addr We always use __initial_memory_limit as an address so rename it to be clear. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-16 03:52:25 +08:00
extern phys_addr_t __initial_memory_limit_addr;
powerpc: Fix problems with 32bit PPC's running with >= 4GB of RAM This patch enables 32bit PPC's (with 36bit physical address space, e.g. IBM/AMCC PPC44x) to run with >= 4GB of RAM. Mostly its just replacing types (unsigned long -> phys_addr_t). Tested on an AMCC Katmai with 4GB of DDR2. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2008-07-09 23:09:23 +08:00
extern phys_addr_t total_memory;
extern phys_addr_t total_lowmem;
[POWERPC] Remove and replace uses of PPC_MEMSTART with memstart_addr A number of users of PPC_MEMSTART (40x, ppc_mmu_32) can just always use 0 as we don't support booting these kernels at non-zero physical addresses since their exception vectors must be at 0 (or 0xfffx_xxxx). For the sub-arches that support relocatable interrupt vectors (book-e), it's reasonable to have memory start at a non-zero physical address. For those cases use the variable memstart_addr instead of the #define PPC_MEMSTART since the only uses of PPC_MEMSTART are for initialization and in the future we can set memstart_addr at runtime to have a relocatable kernel. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-16 03:52:21 +08:00
extern phys_addr_t memstart_addr;
[POWERPC] Introduce lowmem_end_addr to distinguish from total_lowmem total_lowmem represents the amount of low memory, not the physical address that low memory ends at. If the start of memory is at 0 it happens that total_lowmem can be used as both the size and the address that lowmem ends at (or more specifically one byte beyond the end). To make the code a bit more clear and deal with the case when the start of memory isn't at physical 0, we introduce lowmem_end_addr that represents one byte beyond the last physical address in the lowmem region. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-16 03:52:22 +08:00
extern phys_addr_t lowmem_end_addr;
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 14:04:21 +08:00
wii: use both mem1 and mem2 as ram The Nintendo Wii video game console has two discontiguous RAM regions: - MEM1: 24MB @ 0x00000000 - MEM2: 64MB @ 0x10000000 Unfortunately, the kernel currently does not support discontiguous RAM memory regions on 32-bit PowerPC platforms. This patch adds a series of workarounds to allow the use of the second memory region (MEM2) as RAM by the kernel. Basically, a single range of memory from the beginning of MEM1 to the end of MEM2 is reported to the kernel, and a memory reservation is created for the hole between MEM1 and MEM2. With this patch the system is able to use all the available RAM and not just ~27% of it. This will no longer be needed when proper discontig memory support for 32-bit PowerPC is added to the kernel. Signed-off-by: Albert Herranz <albert_herranz@yahoo.es> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-12 14:31:53 +08:00
#ifdef CONFIG_WII
extern unsigned long wii_hole_start;
extern unsigned long wii_hole_size;
extern unsigned long wii_mmu_mapin_mem2(unsigned long top);
extern void wii_memory_fixups(void);
#endif
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 14:04:21 +08:00
/* ...and now those things that may be slightly different between processor
* architectures. -- Dan
*/
powerpc/8xx: Map linear kernel RAM with 8M pages On a live running system (VoIP gateway for Air Trafic Control), over a 10 minutes period (with 277s idle), we get 87 millions DTLB misses and approximatly 35 secondes are spent in DTLB handler. This represents 5.8% of the overall time and even 10.8% of the non-idle time. Among those 87 millions DTLB misses, 15% are on user addresses and 85% are on kernel addresses. And within the kernel addresses, 93% are on addresses from the linear address space and only 7% are on addresses from the virtual address space. MPC8xx has no BATs but it has 8Mb page size. This patch implements mapping of kernel RAM using 8Mb pages, on the same model as what is done on the 40x. In 4k pages mode, each PGD entry maps a 4Mb area: we map every two entries to the same 8Mb physical page. In each second entry, we add 4Mb to the page physical address to ease life of the FixupDAR routine. This is just ignored by HW. In 16k pages mode, each PGD entry maps a 64Mb area: each PGD entry will point to the first page of the area. The DTLB handler adds the 3 bits from EPN to map the correct page. With this patch applied, we now get only 13 millions TLB misses during the 10 minutes period. The idle time has increased to 313s and the overall time spent in DTLB miss handler is 6.3s, which represents 1% of the overall time and 2.2% of non-idle time. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <oss@buserror.net>
2016-02-10 00:07:50 +08:00
#ifdef CONFIG_PPC32
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 14:04:21 +08:00
extern void MMU_init_hw(void);
powerpc: fix up for mmu_mapin_ram api change Today's linux-next build (powerpc ppc44x_defconfig) failed like this: arch/powerpc/mm/pgtable_32.c: In function 'mapin_ram': arch/powerpc/mm/pgtable_32.c:318: error: too many arguments to function 'mmu_mapin_ram' Casued by commit de32400dd26e743c5d500aa42d8d6818b79edb73 ("wii: use both mem1 and mem2 as ram"). Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-15 00:04:24 +08:00
extern unsigned long mmu_mapin_ram(unsigned long top);
powerpc/8xx: Map linear kernel RAM with 8M pages On a live running system (VoIP gateway for Air Trafic Control), over a 10 minutes period (with 277s idle), we get 87 millions DTLB misses and approximatly 35 secondes are spent in DTLB handler. This represents 5.8% of the overall time and even 10.8% of the non-idle time. Among those 87 millions DTLB misses, 15% are on user addresses and 85% are on kernel addresses. And within the kernel addresses, 93% are on addresses from the linear address space and only 7% are on addresses from the virtual address space. MPC8xx has no BATs but it has 8Mb page size. This patch implements mapping of kernel RAM using 8Mb pages, on the same model as what is done on the 40x. In 4k pages mode, each PGD entry maps a 4Mb area: we map every two entries to the same 8Mb physical page. In each second entry, we add 4Mb to the page physical address to ease life of the FixupDAR routine. This is just ignored by HW. In 16k pages mode, each PGD entry maps a 64Mb area: each PGD entry will point to the first page of the area. The DTLB handler adds the 3 bits from EPN to map the correct page. With this patch applied, we now get only 13 millions TLB misses during the 10 minutes period. The idle time has increased to 313s and the overall time spent in DTLB miss handler is 6.3s, which represents 1% of the overall time and 2.2% of non-idle time. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <oss@buserror.net>
2016-02-10 00:07:50 +08:00
#endif
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 14:04:21 +08:00
powerpc/8xx: Map linear kernel RAM with 8M pages On a live running system (VoIP gateway for Air Trafic Control), over a 10 minutes period (with 277s idle), we get 87 millions DTLB misses and approximatly 35 secondes are spent in DTLB handler. This represents 5.8% of the overall time and even 10.8% of the non-idle time. Among those 87 millions DTLB misses, 15% are on user addresses and 85% are on kernel addresses. And within the kernel addresses, 93% are on addresses from the linear address space and only 7% are on addresses from the virtual address space. MPC8xx has no BATs but it has 8Mb page size. This patch implements mapping of kernel RAM using 8Mb pages, on the same model as what is done on the 40x. In 4k pages mode, each PGD entry maps a 4Mb area: we map every two entries to the same 8Mb physical page. In each second entry, we add 4Mb to the page physical address to ease life of the FixupDAR routine. This is just ignored by HW. In 16k pages mode, each PGD entry maps a 64Mb area: each PGD entry will point to the first page of the area. The DTLB handler adds the 3 bits from EPN to map the correct page. With this patch applied, we now get only 13 millions TLB misses during the 10 minutes period. The idle time has increased to 313s and the overall time spent in DTLB miss handler is 6.3s, which represents 1% of the overall time and 2.2% of non-idle time. Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <oss@buserror.net>
2016-02-10 00:07:50 +08:00
#ifdef CONFIG_PPC_FSL_BOOK3E
powerpc/fsl-booke-64: Don't limit ppc64_rma_size to one TLB entry This is required for kdump to work when loaded at at an address that does not fall within the first TLB entry -- which can easily happen because while the lower limit is enforced via reserved memory, which doesn't affect how much is mapped, the upper limit is enforced via a different mechanism that does. Thus, more TLB entries are needed than would normally be used, as the total memory to be mapped might not be a power of two. Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-10-07 11:48:10 +08:00
extern unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx,
bool dryrun);
powerpc/fsl-booke: Fix setup_initial_memory_limit to not blindly map On FSL Book-E devices we support multiple large TLB sizes and so we can get into situations in which the initial 1G TLB size is too big and we're asked for a size that is not mappable by a single entry (like 512M). The single entry is important because when we bring up secondary cores they need to ensure any data structure they need to access (eg PACA or stack) is always mapped. So we really need to determine what size will actually be mapped by the first TLB entry to ensure we limit early memory references to that region. We refactor the map_mem_in_cams() code to provider a helper function that we can utilize to determine the size of the first TLB entry while taking into account size and alignment constraints. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2011-09-16 23:39:59 +08:00
extern unsigned long calc_cam_sz(unsigned long ram, unsigned long virt,
phys_addr_t phys);
powerpc/fsl-booke64: Use TLB CAMs to cover linear mapping on FSL 64-bit chips On Freescale parts typically have TLB array for large mappings that we can bolt the linear mapping into. We utilize the code that already exists on PPC32 on the 64-bit side to setup the linear mapping to be cover by bolted TLB entries. We utilize a quarter of the variable size TLB array for this purpose. Additionally, we limit the amount of memory to what we can cover via bolted entries so we don't get secondary faults in the TLB miss handlers. We should fix this limitation in the future. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-10-17 07:48:40 +08:00
#ifdef CONFIG_PPC32
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 14:04:21 +08:00
extern void adjust_total_lowmem(void);
powerpc/fsl_booke: set the tlb entry for the kernel address in AS1 We use the tlb1 entries to map low mem to the kernel space. In the current code, it assumes that the first tlb entry would cover the kernel image. But this is not true for some special cases, such as when we run a relocatable kernel above the 64M or set CONFIG_KERNEL_START above 64M. So we choose to switch to address space 1 before setting these tlb entries. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-12-24 15:12:07 +08:00
extern int switch_to_as1(void);
powerpc/fsl_booke: smp support for booting a relocatable kernel above 64M When booting above the 64M for a secondary cpu, we also face the same issue as the boot cpu that the PAGE_OFFSET map two different physical address for the init tlb and the final map. So we have to use switch_to_as1/restore_to_as0 between the conversion of these two maps. When restoring to as0 for a secondary cpu, we only need to return to the caller. So add a new parameter for function restore_to_as0 for this purpose. Use LOAD_REG_ADDR_PIC to get the address of variables which may be used before we set the final map in cams for the secondary cpu. Move the setting of cams a bit earlier in order to avoid the unnecessary using of LOAD_REG_ADDR_PIC. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
2013-12-24 15:12:11 +08:00
extern void restore_to_as0(int esel, int offset, void *dt_ptr, int bootcpu);
powerpc/fsl-booke64: Use TLB CAMs to cover linear mapping on FSL 64-bit chips On Freescale parts typically have TLB array for large mappings that we can bolt the linear mapping into. We utilize the code that already exists on PPC32 on the 64-bit side to setup the linear mapping to be cover by bolted TLB entries. We utilize a quarter of the variable size TLB array for this purpose. Additionally, we limit the amount of memory to what we can cover via bolted entries so we don't get secondary faults in the TLB miss handlers. We should fix this limitation in the future. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-10-17 07:48:40 +08:00
#endif
powerpc/fsl-booke: Move loadcam_entry back to asm code to fix SMP ftrace When we build with ftrace enabled its possible that loadcam_entry would have used the stack pointer (even though the code doesn't need it). We call loadcam_entry in __secondary_start before the stack is setup. To ensure that loadcam_entry doesn't use the stack pointer the easiest solution is to just have it in asm code. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-05-14 03:38:21 +08:00
extern void loadcam_entry(unsigned int index);
powerpc/85xx: Load all early TLB entries at once Use an AS=1 trampoline TLB entry to allow all normal TLB1 entries to be loaded at once. This avoids the need to keep the translation that code is executing from in the same TLB entry in the final TLB configuration as during early boot, which in turn is helpful for relocatable kernels (e.g. kdump) where the kernel is not running from what would be the first TLB entry. On e6500, we limit map_mem_in_cams() to the primary hwthread of a core (the boot cpu is always considered primary, as a kdump kernel can be entered on any cpu). Each TLB only needs to be set up once, and when we do, we don't want another thread to be running when we create a temporary trampoline TLB1 entry. Signed-off-by: Scott Wood <scottwood@freescale.com>
2015-10-07 11:48:09 +08:00
extern void loadcam_multi(int first_idx, int num, int tmp_idx);
powerpc/fsl-booke: Move loadcam_entry back to asm code to fix SMP ftrace When we build with ftrace enabled its possible that loadcam_entry would have used the stack pointer (even though the code doesn't need it). We call loadcam_entry in __secondary_start before the stack is setup. To ensure that loadcam_entry doesn't use the stack pointer the easiest solution is to just have it in asm code. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2010-05-14 03:38:21 +08:00
struct tlbcam {
u32 MAS0;
u32 MAS1;
unsigned long MAS2;
u32 MAS3;
u32 MAS7;
};
powerpc: Merge enough to start building in arch/powerpc. This creates the directory structure under arch/powerpc and a bunch of Kconfig files. It does a first-cut merge of arch/powerpc/mm, arch/powerpc/lib and arch/powerpc/platforms/powermac. This is enough to build a 32-bit powermac kernel with ARCH=powerpc. For now we are getting some unmerged files from arch/ppc/kernel and arch/ppc/syslib, or arch/ppc64/kernel. This makes some minor changes to files in those directories and files outside arch/powerpc. The boot directory is still not merged. That's going to be interesting. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-26 14:04:21 +08:00
#endif
powerpc32: refactor x_mapped_by_bats() and x_mapped_by_tlbcam() together x_mapped_by_bats() and x_mapped_by_tlbcam() serve the same kind of purpose, and are never defined at the same time. So rename them x_block_mapped() and define them in the relevant places Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <oss@buserror.net>
2016-02-10 00:07:58 +08:00
#if defined(CONFIG_6xx) || defined(CONFIG_FSL_BOOKE)
/* 6xx have BATS */
/* FSL_BOOKE have TLBCAM */
phys_addr_t v_block_mapped(unsigned long va);
unsigned long p_block_mapped(phys_addr_t pa);
#else
static inline phys_addr_t v_block_mapped(unsigned long va) { return 0; }
static inline unsigned long p_block_mapped(phys_addr_t pa) { return 0; }
#endif