OpenCloudOS-Kernel/drivers/iommu/exynos-iommu.c

1366 lines
36 KiB
C
Raw Normal View History

/*
* Copyright (c) 2011,2016 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifdef CONFIG_EXYNOS_IOMMU_DEBUG
#define DEBUG
#endif
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/iommu.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/of.h>
#include <linux/of_iommu.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/slab.h>
#include <linux/dma-iommu.h>
typedef u32 sysmmu_iova_t;
typedef u32 sysmmu_pte_t;
/* We do not consider super section mapping (16MB) */
#define SECT_ORDER 20
#define LPAGE_ORDER 16
#define SPAGE_ORDER 12
#define SECT_SIZE (1 << SECT_ORDER)
#define LPAGE_SIZE (1 << LPAGE_ORDER)
#define SPAGE_SIZE (1 << SPAGE_ORDER)
#define SECT_MASK (~(SECT_SIZE - 1))
#define LPAGE_MASK (~(LPAGE_SIZE - 1))
#define SPAGE_MASK (~(SPAGE_SIZE - 1))
iommu/exynos: Apply workaround of caching fault page table entries This patch contains 2 workaround for the System MMU v3.x. System MMU v3.2 and v3.3 has FLPD cache that caches first level page table entries to reduce page table walking latency. However, the FLPD cache is filled with a first level page table entry even though it is not accessed by a master H/W because System MMU v3.3 speculatively prefetches page table entries that may be accessed in the near future by the master H/W. The prefetched FLPD cache entries are not invalidated by iommu_unmap() because iommu_unmap() only unmaps and invalidates the page table entries that is mapped. Because exynos-iommu driver discards a second level page table when it needs to be replaced with another second level page table or a first level page table entry with 1MB mapping, It is required to invalidate FLPD cache that may contain the first level page table entry that points to the second level page table. Another workaround of System MMU v3.3 is initializing the first level page table entries with the second level page table which is filled with all zeros. This prevents System MMU prefetches 'fault' first level page table entry which may lead page fault on access to 16MiB wide. System MMU 3.x fetches consecutive page table entries by a page table walking to maximize bus utilization and to minimize TLB miss panelty. Unfortunately, functional problem is raised with the fetching behavior because it fetches 'fault' page table entries that specifies no translation information and that a valid translation information will be written to in the near future. The logic in the System MMU generates page fault with the cached fault entries that is no longer coherent with the page table which is updated. There is another workaround that must be implemented by I/O virtual memory manager: any two consecutive I/O virtual memory area must have a hole between the two that is larger than or equal to 128KiB. Also, next I/O virtual memory area must be started from the next 128KiB boundary. 0 128K 256K 384K 512K |-------------|---------------|-----------------|----------------| |area1---------------->|.........hole...........|<--- area2 ----- The constraint is depicted above. The size is selected by the calculation followed: - System MMU can fetch consecutive 64 page table entries at once 64 * 4KiB = 256KiB. This is the size between 128K ~ 384K of the above picture. This style of fetching is 'block fetch'. It fetches the page table entries predefined consecutive page table entries including the entry that is the reason of the page table walking. - System MMU can prefetch upto consecutive 32 page table entries. This is the size between 256K ~ 384K. Signed-off-by: Cho KyongHo <pullip.cho@samsung.com> Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-05-12 14:15:04 +08:00
#define lv1ent_fault(sent) ((*(sent) == ZERO_LV2LINK) || \
((*(sent) & 3) == 0) || ((*(sent) & 3) == 3))
#define lv1ent_zero(sent) (*(sent) == ZERO_LV2LINK)
#define lv1ent_page_zero(sent) ((*(sent) & 3) == 1)
#define lv1ent_page(sent) ((*(sent) != ZERO_LV2LINK) && \
((*(sent) & 3) == 1))
#define lv1ent_section(sent) ((*(sent) & 3) == 2)
#define lv2ent_fault(pent) ((*(pent) & 3) == 0)
#define lv2ent_small(pent) ((*(pent) & 2) == 2)
#define lv2ent_large(pent) ((*(pent) & 3) == 1)
/*
* v1.x - v3.x SYSMMU supports 32bit physical and 32bit virtual address spaces
* v5.0 introduced support for 36bit physical address space by shifting
* all page entry values by 4 bits.
* All SYSMMU controllers in the system support the address spaces of the same
* size, so PG_ENT_SHIFT can be initialized on first SYSMMU probe to proper
* value (0 or 4).
*/
static short PG_ENT_SHIFT = -1;
#define SYSMMU_PG_ENT_SHIFT 0
#define SYSMMU_V5_PG_ENT_SHIFT 4
#define sect_to_phys(ent) (((phys_addr_t) ent) << PG_ENT_SHIFT)
#define section_phys(sent) (sect_to_phys(*(sent)) & SECT_MASK)
#define section_offs(iova) (iova & (SECT_SIZE - 1))
#define lpage_phys(pent) (sect_to_phys(*(pent)) & LPAGE_MASK)
#define lpage_offs(iova) (iova & (LPAGE_SIZE - 1))
#define spage_phys(pent) (sect_to_phys(*(pent)) & SPAGE_MASK)
#define spage_offs(iova) (iova & (SPAGE_SIZE - 1))
#define NUM_LV1ENTRIES 4096
#define NUM_LV2ENTRIES (SECT_SIZE / SPAGE_SIZE)
static u32 lv1ent_offset(sysmmu_iova_t iova)
{
return iova >> SECT_ORDER;
}
static u32 lv2ent_offset(sysmmu_iova_t iova)
{
return (iova >> SPAGE_ORDER) & (NUM_LV2ENTRIES - 1);
}
#define LV1TABLE_SIZE (NUM_LV1ENTRIES * sizeof(sysmmu_pte_t))
#define LV2TABLE_SIZE (NUM_LV2ENTRIES * sizeof(sysmmu_pte_t))
#define SPAGES_PER_LPAGE (LPAGE_SIZE / SPAGE_SIZE)
#define lv2table_base(sent) (sect_to_phys(*(sent) & 0xFFFFFFC0))
#define mk_lv1ent_sect(pa) ((pa >> PG_ENT_SHIFT) | 2)
#define mk_lv1ent_page(pa) ((pa >> PG_ENT_SHIFT) | 1)
#define mk_lv2ent_lpage(pa) ((pa >> PG_ENT_SHIFT) | 1)
#define mk_lv2ent_spage(pa) ((pa >> PG_ENT_SHIFT) | 2)
#define CTRL_ENABLE 0x5
#define CTRL_BLOCK 0x7
#define CTRL_DISABLE 0x0
#define CFG_LRU 0x1
#define CFG_QOS(n) ((n & 0xF) << 7)
#define CFG_ACGEN (1 << 24) /* System MMU 3.3 only */
#define CFG_SYSSEL (1 << 22) /* System MMU 3.2 only */
#define CFG_FLPDCACHE (1 << 20) /* System MMU 3.2+ only */
/* common registers */
#define REG_MMU_CTRL 0x000
#define REG_MMU_CFG 0x004
#define REG_MMU_STATUS 0x008
#define REG_MMU_VERSION 0x034
#define MMU_MAJ_VER(val) ((val) >> 7)
#define MMU_MIN_VER(val) ((val) & 0x7F)
#define MMU_RAW_VER(reg) (((reg) >> 21) & ((1 << 11) - 1)) /* 11 bits */
#define MAKE_MMU_VER(maj, min) ((((maj) & 0xF) << 7) | ((min) & 0x7F))
/* v1.x - v3.x registers */
#define REG_MMU_FLUSH 0x00C
#define REG_MMU_FLUSH_ENTRY 0x010
#define REG_PT_BASE_ADDR 0x014
#define REG_INT_STATUS 0x018
#define REG_INT_CLEAR 0x01C
#define REG_PAGE_FAULT_ADDR 0x024
#define REG_AW_FAULT_ADDR 0x028
#define REG_AR_FAULT_ADDR 0x02C
#define REG_DEFAULT_SLAVE_ADDR 0x030
/* v5.x registers */
#define REG_V5_PT_BASE_PFN 0x00C
#define REG_V5_MMU_FLUSH_ALL 0x010
#define REG_V5_MMU_FLUSH_ENTRY 0x014
#define REG_V5_INT_STATUS 0x060
#define REG_V5_INT_CLEAR 0x064
#define REG_V5_FAULT_AR_VA 0x070
#define REG_V5_FAULT_AW_VA 0x080
#define has_sysmmu(dev) (dev->archdata.iommu != NULL)
static struct device *dma_dev;
static struct kmem_cache *lv2table_kmem_cache;
iommu/exynos: Apply workaround of caching fault page table entries This patch contains 2 workaround for the System MMU v3.x. System MMU v3.2 and v3.3 has FLPD cache that caches first level page table entries to reduce page table walking latency. However, the FLPD cache is filled with a first level page table entry even though it is not accessed by a master H/W because System MMU v3.3 speculatively prefetches page table entries that may be accessed in the near future by the master H/W. The prefetched FLPD cache entries are not invalidated by iommu_unmap() because iommu_unmap() only unmaps and invalidates the page table entries that is mapped. Because exynos-iommu driver discards a second level page table when it needs to be replaced with another second level page table or a first level page table entry with 1MB mapping, It is required to invalidate FLPD cache that may contain the first level page table entry that points to the second level page table. Another workaround of System MMU v3.3 is initializing the first level page table entries with the second level page table which is filled with all zeros. This prevents System MMU prefetches 'fault' first level page table entry which may lead page fault on access to 16MiB wide. System MMU 3.x fetches consecutive page table entries by a page table walking to maximize bus utilization and to minimize TLB miss panelty. Unfortunately, functional problem is raised with the fetching behavior because it fetches 'fault' page table entries that specifies no translation information and that a valid translation information will be written to in the near future. The logic in the System MMU generates page fault with the cached fault entries that is no longer coherent with the page table which is updated. There is another workaround that must be implemented by I/O virtual memory manager: any two consecutive I/O virtual memory area must have a hole between the two that is larger than or equal to 128KiB. Also, next I/O virtual memory area must be started from the next 128KiB boundary. 0 128K 256K 384K 512K |-------------|---------------|-----------------|----------------| |area1---------------->|.........hole...........|<--- area2 ----- The constraint is depicted above. The size is selected by the calculation followed: - System MMU can fetch consecutive 64 page table entries at once 64 * 4KiB = 256KiB. This is the size between 128K ~ 384K of the above picture. This style of fetching is 'block fetch'. It fetches the page table entries predefined consecutive page table entries including the entry that is the reason of the page table walking. - System MMU can prefetch upto consecutive 32 page table entries. This is the size between 256K ~ 384K. Signed-off-by: Cho KyongHo <pullip.cho@samsung.com> Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-05-12 14:15:04 +08:00
static sysmmu_pte_t *zero_lv2_table;
#define ZERO_LV2LINK mk_lv1ent_page(virt_to_phys(zero_lv2_table))
static sysmmu_pte_t *section_entry(sysmmu_pte_t *pgtable, sysmmu_iova_t iova)
{
return pgtable + lv1ent_offset(iova);
}
static sysmmu_pte_t *page_entry(sysmmu_pte_t *sent, sysmmu_iova_t iova)
{
return (sysmmu_pte_t *)phys_to_virt(
lv2table_base(sent)) + lv2ent_offset(iova);
}
/*
* IOMMU fault information register
*/
struct sysmmu_fault_info {
unsigned int bit; /* bit number in STATUS register */
unsigned short addr_reg; /* register to read VA fault address */
const char *name; /* human readable fault name */
unsigned int type; /* fault type for report_iommu_fault */
};
static const struct sysmmu_fault_info sysmmu_faults[] = {
{ 0, REG_PAGE_FAULT_ADDR, "PAGE", IOMMU_FAULT_READ },
{ 1, REG_AR_FAULT_ADDR, "AR MULTI-HIT", IOMMU_FAULT_READ },
{ 2, REG_AW_FAULT_ADDR, "AW MULTI-HIT", IOMMU_FAULT_WRITE },
{ 3, REG_DEFAULT_SLAVE_ADDR, "BUS ERROR", IOMMU_FAULT_READ },
{ 4, REG_AR_FAULT_ADDR, "AR SECURITY PROTECTION", IOMMU_FAULT_READ },
{ 5, REG_AR_FAULT_ADDR, "AR ACCESS PROTECTION", IOMMU_FAULT_READ },
{ 6, REG_AW_FAULT_ADDR, "AW SECURITY PROTECTION", IOMMU_FAULT_WRITE },
{ 7, REG_AW_FAULT_ADDR, "AW ACCESS PROTECTION", IOMMU_FAULT_WRITE },
};
static const struct sysmmu_fault_info sysmmu_v5_faults[] = {
{ 0, REG_V5_FAULT_AR_VA, "AR PTW", IOMMU_FAULT_READ },
{ 1, REG_V5_FAULT_AR_VA, "AR PAGE", IOMMU_FAULT_READ },
{ 2, REG_V5_FAULT_AR_VA, "AR MULTI-HIT", IOMMU_FAULT_READ },
{ 3, REG_V5_FAULT_AR_VA, "AR ACCESS PROTECTION", IOMMU_FAULT_READ },
{ 4, REG_V5_FAULT_AR_VA, "AR SECURITY PROTECTION", IOMMU_FAULT_READ },
{ 16, REG_V5_FAULT_AW_VA, "AW PTW", IOMMU_FAULT_WRITE },
{ 17, REG_V5_FAULT_AW_VA, "AW PAGE", IOMMU_FAULT_WRITE },
{ 18, REG_V5_FAULT_AW_VA, "AW MULTI-HIT", IOMMU_FAULT_WRITE },
{ 19, REG_V5_FAULT_AW_VA, "AW ACCESS PROTECTION", IOMMU_FAULT_WRITE },
{ 20, REG_V5_FAULT_AW_VA, "AW SECURITY PROTECTION", IOMMU_FAULT_WRITE },
};
/*
* This structure is attached to dev.archdata.iommu of the master device
* on device add, contains a list of SYSMMU controllers defined by device tree,
* which are bound to given master device. It is usually referenced by 'owner'
* pointer.
*/
struct exynos_iommu_owner {
struct list_head controllers; /* list of sysmmu_drvdata.owner_node */
struct iommu_domain *domain; /* domain this device is attached */
};
/*
* This structure exynos specific generalization of struct iommu_domain.
* It contains list of SYSMMU controllers from all master devices, which has
* been attached to this domain and page tables of IO address space defined by
* it. It is usually referenced by 'domain' pointer.
*/
struct exynos_iommu_domain {
struct list_head clients; /* list of sysmmu_drvdata.domain_node */
sysmmu_pte_t *pgtable; /* lv1 page table, 16KB */
short *lv2entcnt; /* free lv2 entry counter for each section */
spinlock_t lock; /* lock for modyfying list of clients */
spinlock_t pgtablelock; /* lock for modifying page table @ pgtable */
struct iommu_domain domain; /* generic domain data structure */
};
/*
* This structure hold all data of a single SYSMMU controller, this includes
* hw resources like registers and clocks, pointers and list nodes to connect
* it to all other structures, internal state and parameters read from device
* tree. It is usually referenced by 'data' pointer.
*/
struct sysmmu_drvdata {
struct device *sysmmu; /* SYSMMU controller device */
struct device *master; /* master device (owner) */
void __iomem *sfrbase; /* our registers */
struct clk *clk; /* SYSMMU's clock */
struct clk *aclk; /* SYSMMU's aclk clock */
struct clk *pclk; /* SYSMMU's pclk clock */
struct clk *clk_master; /* master's device clock */
int activations; /* number of calls to sysmmu_enable */
spinlock_t lock; /* lock for modyfying state */
struct exynos_iommu_domain *domain; /* domain we belong to */
struct list_head domain_node; /* node for domain clients list */
struct list_head owner_node; /* node for owner controllers list */
phys_addr_t pgtable; /* assigned page table structure */
unsigned int version; /* our version */
};
static struct exynos_iommu_domain *to_exynos_domain(struct iommu_domain *dom)
{
return container_of(dom, struct exynos_iommu_domain, domain);
}
static bool set_sysmmu_active(struct sysmmu_drvdata *data)
{
/* return true if the System MMU was not active previously
and it needs to be initialized */
return ++data->activations == 1;
}
static bool set_sysmmu_inactive(struct sysmmu_drvdata *data)
{
/* return true if the System MMU is needed to be disabled */
BUG_ON(data->activations < 1);
return --data->activations == 0;
}
static bool is_sysmmu_active(struct sysmmu_drvdata *data)
{
return data->activations > 0;
}
static void sysmmu_unblock(struct sysmmu_drvdata *data)
{
writel(CTRL_ENABLE, data->sfrbase + REG_MMU_CTRL);
}
static bool sysmmu_block(struct sysmmu_drvdata *data)
{
int i = 120;
writel(CTRL_BLOCK, data->sfrbase + REG_MMU_CTRL);
while ((i > 0) && !(readl(data->sfrbase + REG_MMU_STATUS) & 1))
--i;
if (!(readl(data->sfrbase + REG_MMU_STATUS) & 1)) {
sysmmu_unblock(data);
return false;
}
return true;
}
static void __sysmmu_tlb_invalidate(struct sysmmu_drvdata *data)
{
if (MMU_MAJ_VER(data->version) < 5)
writel(0x1, data->sfrbase + REG_MMU_FLUSH);
else
writel(0x1, data->sfrbase + REG_V5_MMU_FLUSH_ALL);
}
static void __sysmmu_tlb_invalidate_entry(struct sysmmu_drvdata *data,
sysmmu_iova_t iova, unsigned int num_inv)
{
unsigned int i;
for (i = 0; i < num_inv; i++) {
if (MMU_MAJ_VER(data->version) < 5)
writel((iova & SPAGE_MASK) | 1,
data->sfrbase + REG_MMU_FLUSH_ENTRY);
else
writel((iova & SPAGE_MASK) | 1,
data->sfrbase + REG_V5_MMU_FLUSH_ENTRY);
iova += SPAGE_SIZE;
}
}
static void __sysmmu_set_ptbase(struct sysmmu_drvdata *data, phys_addr_t pgd)
{
if (MMU_MAJ_VER(data->version) < 5)
writel(pgd, data->sfrbase + REG_PT_BASE_ADDR);
else
writel(pgd >> PAGE_SHIFT,
data->sfrbase + REG_V5_PT_BASE_PFN);
__sysmmu_tlb_invalidate(data);
}
static void __sysmmu_get_version(struct sysmmu_drvdata *data)
{
u32 ver;
clk_enable(data->clk_master);
clk_enable(data->clk);
clk_enable(data->pclk);
clk_enable(data->aclk);
ver = readl(data->sfrbase + REG_MMU_VERSION);
/* controllers on some SoCs don't report proper version */
if (ver == 0x80000001u)
data->version = MAKE_MMU_VER(1, 0);
else
data->version = MMU_RAW_VER(ver);
dev_dbg(data->sysmmu, "hardware version: %d.%d\n",
MMU_MAJ_VER(data->version), MMU_MIN_VER(data->version));
clk_disable(data->aclk);
clk_disable(data->pclk);
clk_disable(data->clk);
clk_disable(data->clk_master);
}
static void show_fault_information(struct sysmmu_drvdata *data,
const struct sysmmu_fault_info *finfo,
sysmmu_iova_t fault_addr)
{
sysmmu_pte_t *ent;
dev_err(data->sysmmu, "%s FAULT occurred at %#x (page table base: %pa)\n",
finfo->name, fault_addr, &data->pgtable);
ent = section_entry(phys_to_virt(data->pgtable), fault_addr);
dev_err(data->sysmmu, "\tLv1 entry: %#x\n", *ent);
if (lv1ent_page(ent)) {
ent = page_entry(ent, fault_addr);
dev_err(data->sysmmu, "\t Lv2 entry: %#x\n", *ent);
}
}
static irqreturn_t exynos_sysmmu_irq(int irq, void *dev_id)
{
/* SYSMMU is in blocked state when interrupt occurred. */
struct sysmmu_drvdata *data = dev_id;
const struct sysmmu_fault_info *finfo;
unsigned int i, n, itype;
sysmmu_iova_t fault_addr = -1;
unsigned short reg_status, reg_clear;
int ret = -ENOSYS;
WARN_ON(!is_sysmmu_active(data));
if (MMU_MAJ_VER(data->version) < 5) {
reg_status = REG_INT_STATUS;
reg_clear = REG_INT_CLEAR;
finfo = sysmmu_faults;
n = ARRAY_SIZE(sysmmu_faults);
} else {
reg_status = REG_V5_INT_STATUS;
reg_clear = REG_V5_INT_CLEAR;
finfo = sysmmu_v5_faults;
n = ARRAY_SIZE(sysmmu_v5_faults);
}
spin_lock(&data->lock);
clk_enable(data->clk_master);
itype = __ffs(readl(data->sfrbase + reg_status));
for (i = 0; i < n; i++, finfo++)
if (finfo->bit == itype)
break;
/* unknown/unsupported fault */
BUG_ON(i == n);
/* print debug message */
fault_addr = readl(data->sfrbase + finfo->addr_reg);
show_fault_information(data, finfo, fault_addr);
if (data->domain)
ret = report_iommu_fault(&data->domain->domain,
data->master, fault_addr, finfo->type);
/* fault is not recovered by fault handler */
BUG_ON(ret != 0);
writel(1 << itype, data->sfrbase + reg_clear);
sysmmu_unblock(data);
clk_disable(data->clk_master);
spin_unlock(&data->lock);
return IRQ_HANDLED;
}
static void __sysmmu_disable_nocount(struct sysmmu_drvdata *data)
{
clk_enable(data->clk_master);
writel(CTRL_DISABLE, data->sfrbase + REG_MMU_CTRL);
writel(0, data->sfrbase + REG_MMU_CFG);
clk_disable(data->aclk);
clk_disable(data->pclk);
clk_disable(data->clk);
clk_disable(data->clk_master);
}
static bool __sysmmu_disable(struct sysmmu_drvdata *data)
{
bool disabled;
unsigned long flags;
spin_lock_irqsave(&data->lock, flags);
disabled = set_sysmmu_inactive(data);
if (disabled) {
data->pgtable = 0;
data->domain = NULL;
__sysmmu_disable_nocount(data);
dev_dbg(data->sysmmu, "Disabled\n");
} else {
dev_dbg(data->sysmmu, "%d times left to disable\n",
data->activations);
}
spin_unlock_irqrestore(&data->lock, flags);
return disabled;
}
static void __sysmmu_init_config(struct sysmmu_drvdata *data)
{
unsigned int cfg;
if (data->version <= MAKE_MMU_VER(3, 1))
cfg = CFG_LRU | CFG_QOS(15);
else if (data->version <= MAKE_MMU_VER(3, 2))
cfg = CFG_LRU | CFG_QOS(15) | CFG_FLPDCACHE | CFG_SYSSEL;
else
cfg = CFG_QOS(15) | CFG_FLPDCACHE | CFG_ACGEN;
writel(cfg, data->sfrbase + REG_MMU_CFG);
}
static void __sysmmu_enable_nocount(struct sysmmu_drvdata *data)
{
clk_enable(data->clk_master);
clk_enable(data->clk);
clk_enable(data->pclk);
clk_enable(data->aclk);
writel(CTRL_BLOCK, data->sfrbase + REG_MMU_CTRL);
__sysmmu_init_config(data);
__sysmmu_set_ptbase(data, data->pgtable);
writel(CTRL_ENABLE, data->sfrbase + REG_MMU_CTRL);
clk_disable(data->clk_master);
}
static int __sysmmu_enable(struct sysmmu_drvdata *data, phys_addr_t pgtable,
struct exynos_iommu_domain *domain)
{
int ret = 0;
unsigned long flags;
spin_lock_irqsave(&data->lock, flags);
if (set_sysmmu_active(data)) {
data->pgtable = pgtable;
data->domain = domain;
__sysmmu_enable_nocount(data);
dev_dbg(data->sysmmu, "Enabled\n");
} else {
ret = (pgtable == data->pgtable) ? 1 : -EBUSY;
dev_dbg(data->sysmmu, "already enabled\n");
}
if (WARN_ON(ret < 0))
set_sysmmu_inactive(data); /* decrement count */
spin_unlock_irqrestore(&data->lock, flags);
return ret;
}
static void sysmmu_tlb_invalidate_flpdcache(struct sysmmu_drvdata *data,
iommu/exynos: Apply workaround of caching fault page table entries This patch contains 2 workaround for the System MMU v3.x. System MMU v3.2 and v3.3 has FLPD cache that caches first level page table entries to reduce page table walking latency. However, the FLPD cache is filled with a first level page table entry even though it is not accessed by a master H/W because System MMU v3.3 speculatively prefetches page table entries that may be accessed in the near future by the master H/W. The prefetched FLPD cache entries are not invalidated by iommu_unmap() because iommu_unmap() only unmaps and invalidates the page table entries that is mapped. Because exynos-iommu driver discards a second level page table when it needs to be replaced with another second level page table or a first level page table entry with 1MB mapping, It is required to invalidate FLPD cache that may contain the first level page table entry that points to the second level page table. Another workaround of System MMU v3.3 is initializing the first level page table entries with the second level page table which is filled with all zeros. This prevents System MMU prefetches 'fault' first level page table entry which may lead page fault on access to 16MiB wide. System MMU 3.x fetches consecutive page table entries by a page table walking to maximize bus utilization and to minimize TLB miss panelty. Unfortunately, functional problem is raised with the fetching behavior because it fetches 'fault' page table entries that specifies no translation information and that a valid translation information will be written to in the near future. The logic in the System MMU generates page fault with the cached fault entries that is no longer coherent with the page table which is updated. There is another workaround that must be implemented by I/O virtual memory manager: any two consecutive I/O virtual memory area must have a hole between the two that is larger than or equal to 128KiB. Also, next I/O virtual memory area must be started from the next 128KiB boundary. 0 128K 256K 384K 512K |-------------|---------------|-----------------|----------------| |area1---------------->|.........hole...........|<--- area2 ----- The constraint is depicted above. The size is selected by the calculation followed: - System MMU can fetch consecutive 64 page table entries at once 64 * 4KiB = 256KiB. This is the size between 128K ~ 384K of the above picture. This style of fetching is 'block fetch'. It fetches the page table entries predefined consecutive page table entries including the entry that is the reason of the page table walking. - System MMU can prefetch upto consecutive 32 page table entries. This is the size between 256K ~ 384K. Signed-off-by: Cho KyongHo <pullip.cho@samsung.com> Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-05-12 14:15:04 +08:00
sysmmu_iova_t iova)
{
unsigned long flags;
clk_enable(data->clk_master);
iommu/exynos: Apply workaround of caching fault page table entries This patch contains 2 workaround for the System MMU v3.x. System MMU v3.2 and v3.3 has FLPD cache that caches first level page table entries to reduce page table walking latency. However, the FLPD cache is filled with a first level page table entry even though it is not accessed by a master H/W because System MMU v3.3 speculatively prefetches page table entries that may be accessed in the near future by the master H/W. The prefetched FLPD cache entries are not invalidated by iommu_unmap() because iommu_unmap() only unmaps and invalidates the page table entries that is mapped. Because exynos-iommu driver discards a second level page table when it needs to be replaced with another second level page table or a first level page table entry with 1MB mapping, It is required to invalidate FLPD cache that may contain the first level page table entry that points to the second level page table. Another workaround of System MMU v3.3 is initializing the first level page table entries with the second level page table which is filled with all zeros. This prevents System MMU prefetches 'fault' first level page table entry which may lead page fault on access to 16MiB wide. System MMU 3.x fetches consecutive page table entries by a page table walking to maximize bus utilization and to minimize TLB miss panelty. Unfortunately, functional problem is raised with the fetching behavior because it fetches 'fault' page table entries that specifies no translation information and that a valid translation information will be written to in the near future. The logic in the System MMU generates page fault with the cached fault entries that is no longer coherent with the page table which is updated. There is another workaround that must be implemented by I/O virtual memory manager: any two consecutive I/O virtual memory area must have a hole between the two that is larger than or equal to 128KiB. Also, next I/O virtual memory area must be started from the next 128KiB boundary. 0 128K 256K 384K 512K |-------------|---------------|-----------------|----------------| |area1---------------->|.........hole...........|<--- area2 ----- The constraint is depicted above. The size is selected by the calculation followed: - System MMU can fetch consecutive 64 page table entries at once 64 * 4KiB = 256KiB. This is the size between 128K ~ 384K of the above picture. This style of fetching is 'block fetch'. It fetches the page table entries predefined consecutive page table entries including the entry that is the reason of the page table walking. - System MMU can prefetch upto consecutive 32 page table entries. This is the size between 256K ~ 384K. Signed-off-by: Cho KyongHo <pullip.cho@samsung.com> Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-05-12 14:15:04 +08:00
spin_lock_irqsave(&data->lock, flags);
if (is_sysmmu_active(data)) {
if (data->version >= MAKE_MMU_VER(3, 3))
__sysmmu_tlb_invalidate_entry(data, iova, 1);
}
iommu/exynos: Apply workaround of caching fault page table entries This patch contains 2 workaround for the System MMU v3.x. System MMU v3.2 and v3.3 has FLPD cache that caches first level page table entries to reduce page table walking latency. However, the FLPD cache is filled with a first level page table entry even though it is not accessed by a master H/W because System MMU v3.3 speculatively prefetches page table entries that may be accessed in the near future by the master H/W. The prefetched FLPD cache entries are not invalidated by iommu_unmap() because iommu_unmap() only unmaps and invalidates the page table entries that is mapped. Because exynos-iommu driver discards a second level page table when it needs to be replaced with another second level page table or a first level page table entry with 1MB mapping, It is required to invalidate FLPD cache that may contain the first level page table entry that points to the second level page table. Another workaround of System MMU v3.3 is initializing the first level page table entries with the second level page table which is filled with all zeros. This prevents System MMU prefetches 'fault' first level page table entry which may lead page fault on access to 16MiB wide. System MMU 3.x fetches consecutive page table entries by a page table walking to maximize bus utilization and to minimize TLB miss panelty. Unfortunately, functional problem is raised with the fetching behavior because it fetches 'fault' page table entries that specifies no translation information and that a valid translation information will be written to in the near future. The logic in the System MMU generates page fault with the cached fault entries that is no longer coherent with the page table which is updated. There is another workaround that must be implemented by I/O virtual memory manager: any two consecutive I/O virtual memory area must have a hole between the two that is larger than or equal to 128KiB. Also, next I/O virtual memory area must be started from the next 128KiB boundary. 0 128K 256K 384K 512K |-------------|---------------|-----------------|----------------| |area1---------------->|.........hole...........|<--- area2 ----- The constraint is depicted above. The size is selected by the calculation followed: - System MMU can fetch consecutive 64 page table entries at once 64 * 4KiB = 256KiB. This is the size between 128K ~ 384K of the above picture. This style of fetching is 'block fetch'. It fetches the page table entries predefined consecutive page table entries including the entry that is the reason of the page table walking. - System MMU can prefetch upto consecutive 32 page table entries. This is the size between 256K ~ 384K. Signed-off-by: Cho KyongHo <pullip.cho@samsung.com> Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-05-12 14:15:04 +08:00
spin_unlock_irqrestore(&data->lock, flags);
clk_disable(data->clk_master);
iommu/exynos: Apply workaround of caching fault page table entries This patch contains 2 workaround for the System MMU v3.x. System MMU v3.2 and v3.3 has FLPD cache that caches first level page table entries to reduce page table walking latency. However, the FLPD cache is filled with a first level page table entry even though it is not accessed by a master H/W because System MMU v3.3 speculatively prefetches page table entries that may be accessed in the near future by the master H/W. The prefetched FLPD cache entries are not invalidated by iommu_unmap() because iommu_unmap() only unmaps and invalidates the page table entries that is mapped. Because exynos-iommu driver discards a second level page table when it needs to be replaced with another second level page table or a first level page table entry with 1MB mapping, It is required to invalidate FLPD cache that may contain the first level page table entry that points to the second level page table. Another workaround of System MMU v3.3 is initializing the first level page table entries with the second level page table which is filled with all zeros. This prevents System MMU prefetches 'fault' first level page table entry which may lead page fault on access to 16MiB wide. System MMU 3.x fetches consecutive page table entries by a page table walking to maximize bus utilization and to minimize TLB miss panelty. Unfortunately, functional problem is raised with the fetching behavior because it fetches 'fault' page table entries that specifies no translation information and that a valid translation information will be written to in the near future. The logic in the System MMU generates page fault with the cached fault entries that is no longer coherent with the page table which is updated. There is another workaround that must be implemented by I/O virtual memory manager: any two consecutive I/O virtual memory area must have a hole between the two that is larger than or equal to 128KiB. Also, next I/O virtual memory area must be started from the next 128KiB boundary. 0 128K 256K 384K 512K |-------------|---------------|-----------------|----------------| |area1---------------->|.........hole...........|<--- area2 ----- The constraint is depicted above. The size is selected by the calculation followed: - System MMU can fetch consecutive 64 page table entries at once 64 * 4KiB = 256KiB. This is the size between 128K ~ 384K of the above picture. This style of fetching is 'block fetch'. It fetches the page table entries predefined consecutive page table entries including the entry that is the reason of the page table walking. - System MMU can prefetch upto consecutive 32 page table entries. This is the size between 256K ~ 384K. Signed-off-by: Cho KyongHo <pullip.cho@samsung.com> Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-05-12 14:15:04 +08:00
}
static void sysmmu_tlb_invalidate_entry(struct sysmmu_drvdata *data,
sysmmu_iova_t iova, size_t size)
{
unsigned long flags;
spin_lock_irqsave(&data->lock, flags);
if (is_sysmmu_active(data)) {
unsigned int num_inv = 1;
clk_enable(data->clk_master);
/*
* L2TLB invalidation required
* 4KB page: 1 invalidation
* 64KB page: 16 invalidations
* 1MB page: 64 invalidations
* because it is set-associative TLB
* with 8-way and 64 sets.
* 1MB page can be cached in one of all sets.
* 64KB page can be one of 16 consecutive sets.
*/
if (MMU_MAJ_VER(data->version) == 2)
num_inv = min_t(unsigned int, size / PAGE_SIZE, 64);
if (sysmmu_block(data)) {
__sysmmu_tlb_invalidate_entry(data, iova, num_inv);
sysmmu_unblock(data);
}
clk_disable(data->clk_master);
} else {
dev_dbg(data->master,
"disabled. Skipping TLB invalidation @ %#x\n", iova);
}
spin_unlock_irqrestore(&data->lock, flags);
}
static int __init exynos_sysmmu_probe(struct platform_device *pdev)
{
int irq, ret;
struct device *dev = &pdev->dev;
struct sysmmu_drvdata *data;
struct resource *res;
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
data->sfrbase = devm_ioremap_resource(dev, res);
if (IS_ERR(data->sfrbase))
return PTR_ERR(data->sfrbase);
irq = platform_get_irq(pdev, 0);
if (irq <= 0) {
dev_err(dev, "Unable to find IRQ resource\n");
return irq;
}
ret = devm_request_irq(dev, irq, exynos_sysmmu_irq, 0,
dev_name(dev), data);
if (ret) {
dev_err(dev, "Unabled to register handler of irq %d\n", irq);
return ret;
}
data->clk = devm_clk_get(dev, "sysmmu");
if (!IS_ERR(data->clk)) {
ret = clk_prepare(data->clk);
if (ret) {
dev_err(dev, "Failed to prepare clk\n");
return ret;
}
} else {
data->clk = NULL;
}
data->aclk = devm_clk_get(dev, "aclk");
if (!IS_ERR(data->aclk)) {
ret = clk_prepare(data->aclk);
if (ret) {
dev_err(dev, "Failed to prepare aclk\n");
return ret;
}
} else {
data->aclk = NULL;
}
data->pclk = devm_clk_get(dev, "pclk");
if (!IS_ERR(data->pclk)) {
ret = clk_prepare(data->pclk);
if (ret) {
dev_err(dev, "Failed to prepare pclk\n");
return ret;
}
} else {
data->pclk = NULL;
}
if (!data->clk && (!data->aclk || !data->pclk)) {
dev_err(dev, "Failed to get device clock(s)!\n");
return -ENOSYS;
}
data->clk_master = devm_clk_get(dev, "master");
if (!IS_ERR(data->clk_master)) {
ret = clk_prepare(data->clk_master);
if (ret) {
dev_err(dev, "Failed to prepare master's clk\n");
return ret;
}
} else {
data->clk_master = NULL;
}
data->sysmmu = dev;
spin_lock_init(&data->lock);
platform_set_drvdata(pdev, data);
__sysmmu_get_version(data);
if (PG_ENT_SHIFT < 0) {
if (MMU_MAJ_VER(data->version) < 5)
PG_ENT_SHIFT = SYSMMU_PG_ENT_SHIFT;
else
PG_ENT_SHIFT = SYSMMU_V5_PG_ENT_SHIFT;
}
pm_runtime_enable(dev);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int exynos_sysmmu_suspend(struct device *dev)
{
struct sysmmu_drvdata *data = dev_get_drvdata(dev);
dev_dbg(dev, "suspend\n");
if (is_sysmmu_active(data)) {
__sysmmu_disable_nocount(data);
pm_runtime_put(dev);
}
return 0;
}
static int exynos_sysmmu_resume(struct device *dev)
{
struct sysmmu_drvdata *data = dev_get_drvdata(dev);
dev_dbg(dev, "resume\n");
if (is_sysmmu_active(data)) {
pm_runtime_get_sync(dev);
__sysmmu_enable_nocount(data);
}
return 0;
}
#endif
static const struct dev_pm_ops sysmmu_pm_ops = {
SET_LATE_SYSTEM_SLEEP_PM_OPS(exynos_sysmmu_suspend, exynos_sysmmu_resume)
};
static const struct of_device_id sysmmu_of_match[] __initconst = {
{ .compatible = "samsung,exynos-sysmmu", },
{ },
};
static struct platform_driver exynos_sysmmu_driver __refdata = {
.probe = exynos_sysmmu_probe,
.driver = {
.name = "exynos-sysmmu",
.of_match_table = sysmmu_of_match,
.pm = &sysmmu_pm_ops,
}
};
static inline void update_pte(sysmmu_pte_t *ent, sysmmu_pte_t val)
{
dma_sync_single_for_cpu(dma_dev, virt_to_phys(ent), sizeof(*ent),
DMA_TO_DEVICE);
*ent = val;
dma_sync_single_for_device(dma_dev, virt_to_phys(ent), sizeof(*ent),
DMA_TO_DEVICE);
}
static struct iommu_domain *exynos_iommu_domain_alloc(unsigned type)
{
struct exynos_iommu_domain *domain;
dma_addr_t handle;
iommu/exynos: Apply workaround of caching fault page table entries This patch contains 2 workaround for the System MMU v3.x. System MMU v3.2 and v3.3 has FLPD cache that caches first level page table entries to reduce page table walking latency. However, the FLPD cache is filled with a first level page table entry even though it is not accessed by a master H/W because System MMU v3.3 speculatively prefetches page table entries that may be accessed in the near future by the master H/W. The prefetched FLPD cache entries are not invalidated by iommu_unmap() because iommu_unmap() only unmaps and invalidates the page table entries that is mapped. Because exynos-iommu driver discards a second level page table when it needs to be replaced with another second level page table or a first level page table entry with 1MB mapping, It is required to invalidate FLPD cache that may contain the first level page table entry that points to the second level page table. Another workaround of System MMU v3.3 is initializing the first level page table entries with the second level page table which is filled with all zeros. This prevents System MMU prefetches 'fault' first level page table entry which may lead page fault on access to 16MiB wide. System MMU 3.x fetches consecutive page table entries by a page table walking to maximize bus utilization and to minimize TLB miss panelty. Unfortunately, functional problem is raised with the fetching behavior because it fetches 'fault' page table entries that specifies no translation information and that a valid translation information will be written to in the near future. The logic in the System MMU generates page fault with the cached fault entries that is no longer coherent with the page table which is updated. There is another workaround that must be implemented by I/O virtual memory manager: any two consecutive I/O virtual memory area must have a hole between the two that is larger than or equal to 128KiB. Also, next I/O virtual memory area must be started from the next 128KiB boundary. 0 128K 256K 384K 512K |-------------|---------------|-----------------|----------------| |area1---------------->|.........hole...........|<--- area2 ----- The constraint is depicted above. The size is selected by the calculation followed: - System MMU can fetch consecutive 64 page table entries at once 64 * 4KiB = 256KiB. This is the size between 128K ~ 384K of the above picture. This style of fetching is 'block fetch'. It fetches the page table entries predefined consecutive page table entries including the entry that is the reason of the page table walking. - System MMU can prefetch upto consecutive 32 page table entries. This is the size between 256K ~ 384K. Signed-off-by: Cho KyongHo <pullip.cho@samsung.com> Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-05-12 14:15:04 +08:00
int i;
/* Check if correct PTE offsets are initialized */
BUG_ON(PG_ENT_SHIFT < 0 || !dma_dev);
domain = kzalloc(sizeof(*domain), GFP_KERNEL);
if (!domain)
return NULL;
if (type == IOMMU_DOMAIN_DMA) {
if (iommu_get_dma_cookie(&domain->domain) != 0)
goto err_pgtable;
} else if (type != IOMMU_DOMAIN_UNMANAGED) {
goto err_pgtable;
}
domain->pgtable = (sysmmu_pte_t *)__get_free_pages(GFP_KERNEL, 2);
if (!domain->pgtable)
goto err_dma_cookie;
domain->lv2entcnt = (short *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, 1);
if (!domain->lv2entcnt)
goto err_counter;
/* Workaround for System MMU v3.3 to prevent caching 1MiB mapping */
iommu/exynos: Apply workaround of caching fault page table entries This patch contains 2 workaround for the System MMU v3.x. System MMU v3.2 and v3.3 has FLPD cache that caches first level page table entries to reduce page table walking latency. However, the FLPD cache is filled with a first level page table entry even though it is not accessed by a master H/W because System MMU v3.3 speculatively prefetches page table entries that may be accessed in the near future by the master H/W. The prefetched FLPD cache entries are not invalidated by iommu_unmap() because iommu_unmap() only unmaps and invalidates the page table entries that is mapped. Because exynos-iommu driver discards a second level page table when it needs to be replaced with another second level page table or a first level page table entry with 1MB mapping, It is required to invalidate FLPD cache that may contain the first level page table entry that points to the second level page table. Another workaround of System MMU v3.3 is initializing the first level page table entries with the second level page table which is filled with all zeros. This prevents System MMU prefetches 'fault' first level page table entry which may lead page fault on access to 16MiB wide. System MMU 3.x fetches consecutive page table entries by a page table walking to maximize bus utilization and to minimize TLB miss panelty. Unfortunately, functional problem is raised with the fetching behavior because it fetches 'fault' page table entries that specifies no translation information and that a valid translation information will be written to in the near future. The logic in the System MMU generates page fault with the cached fault entries that is no longer coherent with the page table which is updated. There is another workaround that must be implemented by I/O virtual memory manager: any two consecutive I/O virtual memory area must have a hole between the two that is larger than or equal to 128KiB. Also, next I/O virtual memory area must be started from the next 128KiB boundary. 0 128K 256K 384K 512K |-------------|---------------|-----------------|----------------| |area1---------------->|.........hole...........|<--- area2 ----- The constraint is depicted above. The size is selected by the calculation followed: - System MMU can fetch consecutive 64 page table entries at once 64 * 4KiB = 256KiB. This is the size between 128K ~ 384K of the above picture. This style of fetching is 'block fetch'. It fetches the page table entries predefined consecutive page table entries including the entry that is the reason of the page table walking. - System MMU can prefetch upto consecutive 32 page table entries. This is the size between 256K ~ 384K. Signed-off-by: Cho KyongHo <pullip.cho@samsung.com> Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-05-12 14:15:04 +08:00
for (i = 0; i < NUM_LV1ENTRIES; i += 8) {
domain->pgtable[i + 0] = ZERO_LV2LINK;
domain->pgtable[i + 1] = ZERO_LV2LINK;
domain->pgtable[i + 2] = ZERO_LV2LINK;
domain->pgtable[i + 3] = ZERO_LV2LINK;
domain->pgtable[i + 4] = ZERO_LV2LINK;
domain->pgtable[i + 5] = ZERO_LV2LINK;
domain->pgtable[i + 6] = ZERO_LV2LINK;
domain->pgtable[i + 7] = ZERO_LV2LINK;
iommu/exynos: Apply workaround of caching fault page table entries This patch contains 2 workaround for the System MMU v3.x. System MMU v3.2 and v3.3 has FLPD cache that caches first level page table entries to reduce page table walking latency. However, the FLPD cache is filled with a first level page table entry even though it is not accessed by a master H/W because System MMU v3.3 speculatively prefetches page table entries that may be accessed in the near future by the master H/W. The prefetched FLPD cache entries are not invalidated by iommu_unmap() because iommu_unmap() only unmaps and invalidates the page table entries that is mapped. Because exynos-iommu driver discards a second level page table when it needs to be replaced with another second level page table or a first level page table entry with 1MB mapping, It is required to invalidate FLPD cache that may contain the first level page table entry that points to the second level page table. Another workaround of System MMU v3.3 is initializing the first level page table entries with the second level page table which is filled with all zeros. This prevents System MMU prefetches 'fault' first level page table entry which may lead page fault on access to 16MiB wide. System MMU 3.x fetches consecutive page table entries by a page table walking to maximize bus utilization and to minimize TLB miss panelty. Unfortunately, functional problem is raised with the fetching behavior because it fetches 'fault' page table entries that specifies no translation information and that a valid translation information will be written to in the near future. The logic in the System MMU generates page fault with the cached fault entries that is no longer coherent with the page table which is updated. There is another workaround that must be implemented by I/O virtual memory manager: any two consecutive I/O virtual memory area must have a hole between the two that is larger than or equal to 128KiB. Also, next I/O virtual memory area must be started from the next 128KiB boundary. 0 128K 256K 384K 512K |-------------|---------------|-----------------|----------------| |area1---------------->|.........hole...........|<--- area2 ----- The constraint is depicted above. The size is selected by the calculation followed: - System MMU can fetch consecutive 64 page table entries at once 64 * 4KiB = 256KiB. This is the size between 128K ~ 384K of the above picture. This style of fetching is 'block fetch'. It fetches the page table entries predefined consecutive page table entries including the entry that is the reason of the page table walking. - System MMU can prefetch upto consecutive 32 page table entries. This is the size between 256K ~ 384K. Signed-off-by: Cho KyongHo <pullip.cho@samsung.com> Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-05-12 14:15:04 +08:00
}
handle = dma_map_single(dma_dev, domain->pgtable, LV1TABLE_SIZE,
DMA_TO_DEVICE);
/* For mapping page table entries we rely on dma == phys */
BUG_ON(handle != virt_to_phys(domain->pgtable));
spin_lock_init(&domain->lock);
spin_lock_init(&domain->pgtablelock);
INIT_LIST_HEAD(&domain->clients);
domain->domain.geometry.aperture_start = 0;
domain->domain.geometry.aperture_end = ~0UL;
domain->domain.geometry.force_aperture = true;
return &domain->domain;
err_counter:
free_pages((unsigned long)domain->pgtable, 2);
err_dma_cookie:
if (type == IOMMU_DOMAIN_DMA)
iommu_put_dma_cookie(&domain->domain);
err_pgtable:
kfree(domain);
return NULL;
}
static void exynos_iommu_domain_free(struct iommu_domain *iommu_domain)
{
struct exynos_iommu_domain *domain = to_exynos_domain(iommu_domain);
struct sysmmu_drvdata *data, *next;
unsigned long flags;
int i;
WARN_ON(!list_empty(&domain->clients));
spin_lock_irqsave(&domain->lock, flags);
list_for_each_entry_safe(data, next, &domain->clients, domain_node) {
if (__sysmmu_disable(data))
data->master = NULL;
list_del_init(&data->domain_node);
}
spin_unlock_irqrestore(&domain->lock, flags);
if (iommu_domain->type == IOMMU_DOMAIN_DMA)
iommu_put_dma_cookie(iommu_domain);
dma_unmap_single(dma_dev, virt_to_phys(domain->pgtable), LV1TABLE_SIZE,
DMA_TO_DEVICE);
for (i = 0; i < NUM_LV1ENTRIES; i++)
if (lv1ent_page(domain->pgtable + i)) {
phys_addr_t base = lv2table_base(domain->pgtable + i);
dma_unmap_single(dma_dev, base, LV2TABLE_SIZE,
DMA_TO_DEVICE);
kmem_cache_free(lv2table_kmem_cache,
phys_to_virt(base));
}
free_pages((unsigned long)domain->pgtable, 2);
free_pages((unsigned long)domain->lv2entcnt, 1);
kfree(domain);
}
static void exynos_iommu_detach_device(struct iommu_domain *iommu_domain,
struct device *dev)
{
struct exynos_iommu_owner *owner = dev->archdata.iommu;
struct exynos_iommu_domain *domain = to_exynos_domain(iommu_domain);
phys_addr_t pagetable = virt_to_phys(domain->pgtable);
struct sysmmu_drvdata *data, *next;
unsigned long flags;
bool found = false;
if (!has_sysmmu(dev) || owner->domain != iommu_domain)
return;
spin_lock_irqsave(&domain->lock, flags);
list_for_each_entry_safe(data, next, &domain->clients, domain_node) {
if (data->master == dev) {
if (__sysmmu_disable(data)) {
data->master = NULL;
list_del_init(&data->domain_node);
}
pm_runtime_put(data->sysmmu);
found = true;
}
}
spin_unlock_irqrestore(&domain->lock, flags);
owner->domain = NULL;
if (found)
dev_dbg(dev, "%s: Detached IOMMU with pgtable %pa\n",
__func__, &pagetable);
else
dev_err(dev, "%s: No IOMMU is attached\n", __func__);
}
static int exynos_iommu_attach_device(struct iommu_domain *iommu_domain,
struct device *dev)
{
struct exynos_iommu_owner *owner = dev->archdata.iommu;
struct exynos_iommu_domain *domain = to_exynos_domain(iommu_domain);
struct sysmmu_drvdata *data;
phys_addr_t pagetable = virt_to_phys(domain->pgtable);
unsigned long flags;
int ret = -ENODEV;
if (!has_sysmmu(dev))
return -ENODEV;
if (owner->domain)
exynos_iommu_detach_device(owner->domain, dev);
list_for_each_entry(data, &owner->controllers, owner_node) {
pm_runtime_get_sync(data->sysmmu);
ret = __sysmmu_enable(data, pagetable, domain);
if (ret >= 0) {
data->master = dev;
spin_lock_irqsave(&domain->lock, flags);
list_add_tail(&data->domain_node, &domain->clients);
spin_unlock_irqrestore(&domain->lock, flags);
}
}
if (ret < 0) {
dev_err(dev, "%s: Failed to attach IOMMU with pgtable %pa\n",
__func__, &pagetable);
return ret;
}
owner->domain = iommu_domain;
dev_dbg(dev, "%s: Attached IOMMU with pgtable %pa %s\n",
__func__, &pagetable, (ret == 0) ? "" : ", again");
return ret;
}
static sysmmu_pte_t *alloc_lv2entry(struct exynos_iommu_domain *domain,
iommu/exynos: Apply workaround of caching fault page table entries This patch contains 2 workaround for the System MMU v3.x. System MMU v3.2 and v3.3 has FLPD cache that caches first level page table entries to reduce page table walking latency. However, the FLPD cache is filled with a first level page table entry even though it is not accessed by a master H/W because System MMU v3.3 speculatively prefetches page table entries that may be accessed in the near future by the master H/W. The prefetched FLPD cache entries are not invalidated by iommu_unmap() because iommu_unmap() only unmaps and invalidates the page table entries that is mapped. Because exynos-iommu driver discards a second level page table when it needs to be replaced with another second level page table or a first level page table entry with 1MB mapping, It is required to invalidate FLPD cache that may contain the first level page table entry that points to the second level page table. Another workaround of System MMU v3.3 is initializing the first level page table entries with the second level page table which is filled with all zeros. This prevents System MMU prefetches 'fault' first level page table entry which may lead page fault on access to 16MiB wide. System MMU 3.x fetches consecutive page table entries by a page table walking to maximize bus utilization and to minimize TLB miss panelty. Unfortunately, functional problem is raised with the fetching behavior because it fetches 'fault' page table entries that specifies no translation information and that a valid translation information will be written to in the near future. The logic in the System MMU generates page fault with the cached fault entries that is no longer coherent with the page table which is updated. There is another workaround that must be implemented by I/O virtual memory manager: any two consecutive I/O virtual memory area must have a hole between the two that is larger than or equal to 128KiB. Also, next I/O virtual memory area must be started from the next 128KiB boundary. 0 128K 256K 384K 512K |-------------|---------------|-----------------|----------------| |area1---------------->|.........hole...........|<--- area2 ----- The constraint is depicted above. The size is selected by the calculation followed: - System MMU can fetch consecutive 64 page table entries at once 64 * 4KiB = 256KiB. This is the size between 128K ~ 384K of the above picture. This style of fetching is 'block fetch'. It fetches the page table entries predefined consecutive page table entries including the entry that is the reason of the page table walking. - System MMU can prefetch upto consecutive 32 page table entries. This is the size between 256K ~ 384K. Signed-off-by: Cho KyongHo <pullip.cho@samsung.com> Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-05-12 14:15:04 +08:00
sysmmu_pte_t *sent, sysmmu_iova_t iova, short *pgcounter)
{
if (lv1ent_section(sent)) {
WARN(1, "Trying mapping on %#08x mapped with 1MiB page", iova);
return ERR_PTR(-EADDRINUSE);
}
if (lv1ent_fault(sent)) {
sysmmu_pte_t *pent;
iommu/exynos: Apply workaround of caching fault page table entries This patch contains 2 workaround for the System MMU v3.x. System MMU v3.2 and v3.3 has FLPD cache that caches first level page table entries to reduce page table walking latency. However, the FLPD cache is filled with a first level page table entry even though it is not accessed by a master H/W because System MMU v3.3 speculatively prefetches page table entries that may be accessed in the near future by the master H/W. The prefetched FLPD cache entries are not invalidated by iommu_unmap() because iommu_unmap() only unmaps and invalidates the page table entries that is mapped. Because exynos-iommu driver discards a second level page table when it needs to be replaced with another second level page table or a first level page table entry with 1MB mapping, It is required to invalidate FLPD cache that may contain the first level page table entry that points to the second level page table. Another workaround of System MMU v3.3 is initializing the first level page table entries with the second level page table which is filled with all zeros. This prevents System MMU prefetches 'fault' first level page table entry which may lead page fault on access to 16MiB wide. System MMU 3.x fetches consecutive page table entries by a page table walking to maximize bus utilization and to minimize TLB miss panelty. Unfortunately, functional problem is raised with the fetching behavior because it fetches 'fault' page table entries that specifies no translation information and that a valid translation information will be written to in the near future. The logic in the System MMU generates page fault with the cached fault entries that is no longer coherent with the page table which is updated. There is another workaround that must be implemented by I/O virtual memory manager: any two consecutive I/O virtual memory area must have a hole between the two that is larger than or equal to 128KiB. Also, next I/O virtual memory area must be started from the next 128KiB boundary. 0 128K 256K 384K 512K |-------------|---------------|-----------------|----------------| |area1---------------->|.........hole...........|<--- area2 ----- The constraint is depicted above. The size is selected by the calculation followed: - System MMU can fetch consecutive 64 page table entries at once 64 * 4KiB = 256KiB. This is the size between 128K ~ 384K of the above picture. This style of fetching is 'block fetch'. It fetches the page table entries predefined consecutive page table entries including the entry that is the reason of the page table walking. - System MMU can prefetch upto consecutive 32 page table entries. This is the size between 256K ~ 384K. Signed-off-by: Cho KyongHo <pullip.cho@samsung.com> Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-05-12 14:15:04 +08:00
bool need_flush_flpd_cache = lv1ent_zero(sent);
pent = kmem_cache_zalloc(lv2table_kmem_cache, GFP_ATOMIC);
BUG_ON((uintptr_t)pent & (LV2TABLE_SIZE - 1));
if (!pent)
return ERR_PTR(-ENOMEM);
update_pte(sent, mk_lv1ent_page(virt_to_phys(pent)));
kmemleak_ignore(pent);
*pgcounter = NUM_LV2ENTRIES;
dma_map_single(dma_dev, pent, LV2TABLE_SIZE, DMA_TO_DEVICE);
iommu/exynos: Apply workaround of caching fault page table entries This patch contains 2 workaround for the System MMU v3.x. System MMU v3.2 and v3.3 has FLPD cache that caches first level page table entries to reduce page table walking latency. However, the FLPD cache is filled with a first level page table entry even though it is not accessed by a master H/W because System MMU v3.3 speculatively prefetches page table entries that may be accessed in the near future by the master H/W. The prefetched FLPD cache entries are not invalidated by iommu_unmap() because iommu_unmap() only unmaps and invalidates the page table entries that is mapped. Because exynos-iommu driver discards a second level page table when it needs to be replaced with another second level page table or a first level page table entry with 1MB mapping, It is required to invalidate FLPD cache that may contain the first level page table entry that points to the second level page table. Another workaround of System MMU v3.3 is initializing the first level page table entries with the second level page table which is filled with all zeros. This prevents System MMU prefetches 'fault' first level page table entry which may lead page fault on access to 16MiB wide. System MMU 3.x fetches consecutive page table entries by a page table walking to maximize bus utilization and to minimize TLB miss panelty. Unfortunately, functional problem is raised with the fetching behavior because it fetches 'fault' page table entries that specifies no translation information and that a valid translation information will be written to in the near future. The logic in the System MMU generates page fault with the cached fault entries that is no longer coherent with the page table which is updated. There is another workaround that must be implemented by I/O virtual memory manager: any two consecutive I/O virtual memory area must have a hole between the two that is larger than or equal to 128KiB. Also, next I/O virtual memory area must be started from the next 128KiB boundary. 0 128K 256K 384K 512K |-------------|---------------|-----------------|----------------| |area1---------------->|.........hole...........|<--- area2 ----- The constraint is depicted above. The size is selected by the calculation followed: - System MMU can fetch consecutive 64 page table entries at once 64 * 4KiB = 256KiB. This is the size between 128K ~ 384K of the above picture. This style of fetching is 'block fetch'. It fetches the page table entries predefined consecutive page table entries including the entry that is the reason of the page table walking. - System MMU can prefetch upto consecutive 32 page table entries. This is the size between 256K ~ 384K. Signed-off-by: Cho KyongHo <pullip.cho@samsung.com> Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-05-12 14:15:04 +08:00
/*
* If pre-fetched SLPD is a faulty SLPD in zero_l2_table,
* FLPD cache may cache the address of zero_l2_table. This
* function replaces the zero_l2_table with new L2 page table
* to write valid mappings.
iommu/exynos: Apply workaround of caching fault page table entries This patch contains 2 workaround for the System MMU v3.x. System MMU v3.2 and v3.3 has FLPD cache that caches first level page table entries to reduce page table walking latency. However, the FLPD cache is filled with a first level page table entry even though it is not accessed by a master H/W because System MMU v3.3 speculatively prefetches page table entries that may be accessed in the near future by the master H/W. The prefetched FLPD cache entries are not invalidated by iommu_unmap() because iommu_unmap() only unmaps and invalidates the page table entries that is mapped. Because exynos-iommu driver discards a second level page table when it needs to be replaced with another second level page table or a first level page table entry with 1MB mapping, It is required to invalidate FLPD cache that may contain the first level page table entry that points to the second level page table. Another workaround of System MMU v3.3 is initializing the first level page table entries with the second level page table which is filled with all zeros. This prevents System MMU prefetches 'fault' first level page table entry which may lead page fault on access to 16MiB wide. System MMU 3.x fetches consecutive page table entries by a page table walking to maximize bus utilization and to minimize TLB miss panelty. Unfortunately, functional problem is raised with the fetching behavior because it fetches 'fault' page table entries that specifies no translation information and that a valid translation information will be written to in the near future. The logic in the System MMU generates page fault with the cached fault entries that is no longer coherent with the page table which is updated. There is another workaround that must be implemented by I/O virtual memory manager: any two consecutive I/O virtual memory area must have a hole between the two that is larger than or equal to 128KiB. Also, next I/O virtual memory area must be started from the next 128KiB boundary. 0 128K 256K 384K 512K |-------------|---------------|-----------------|----------------| |area1---------------->|.........hole...........|<--- area2 ----- The constraint is depicted above. The size is selected by the calculation followed: - System MMU can fetch consecutive 64 page table entries at once 64 * 4KiB = 256KiB. This is the size between 128K ~ 384K of the above picture. This style of fetching is 'block fetch'. It fetches the page table entries predefined consecutive page table entries including the entry that is the reason of the page table walking. - System MMU can prefetch upto consecutive 32 page table entries. This is the size between 256K ~ 384K. Signed-off-by: Cho KyongHo <pullip.cho@samsung.com> Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-05-12 14:15:04 +08:00
* Accessing the valid area may cause page fault since FLPD
* cache may still cache zero_l2_table for the valid area
* instead of new L2 page table that has the mapping
* information of the valid area.
iommu/exynos: Apply workaround of caching fault page table entries This patch contains 2 workaround for the System MMU v3.x. System MMU v3.2 and v3.3 has FLPD cache that caches first level page table entries to reduce page table walking latency. However, the FLPD cache is filled with a first level page table entry even though it is not accessed by a master H/W because System MMU v3.3 speculatively prefetches page table entries that may be accessed in the near future by the master H/W. The prefetched FLPD cache entries are not invalidated by iommu_unmap() because iommu_unmap() only unmaps and invalidates the page table entries that is mapped. Because exynos-iommu driver discards a second level page table when it needs to be replaced with another second level page table or a first level page table entry with 1MB mapping, It is required to invalidate FLPD cache that may contain the first level page table entry that points to the second level page table. Another workaround of System MMU v3.3 is initializing the first level page table entries with the second level page table which is filled with all zeros. This prevents System MMU prefetches 'fault' first level page table entry which may lead page fault on access to 16MiB wide. System MMU 3.x fetches consecutive page table entries by a page table walking to maximize bus utilization and to minimize TLB miss panelty. Unfortunately, functional problem is raised with the fetching behavior because it fetches 'fault' page table entries that specifies no translation information and that a valid translation information will be written to in the near future. The logic in the System MMU generates page fault with the cached fault entries that is no longer coherent with the page table which is updated. There is another workaround that must be implemented by I/O virtual memory manager: any two consecutive I/O virtual memory area must have a hole between the two that is larger than or equal to 128KiB. Also, next I/O virtual memory area must be started from the next 128KiB boundary. 0 128K 256K 384K 512K |-------------|---------------|-----------------|----------------| |area1---------------->|.........hole...........|<--- area2 ----- The constraint is depicted above. The size is selected by the calculation followed: - System MMU can fetch consecutive 64 page table entries at once 64 * 4KiB = 256KiB. This is the size between 128K ~ 384K of the above picture. This style of fetching is 'block fetch'. It fetches the page table entries predefined consecutive page table entries including the entry that is the reason of the page table walking. - System MMU can prefetch upto consecutive 32 page table entries. This is the size between 256K ~ 384K. Signed-off-by: Cho KyongHo <pullip.cho@samsung.com> Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-05-12 14:15:04 +08:00
* Thus any replacement of zero_l2_table with other valid L2
* page table must involve FLPD cache invalidation for System
* MMU v3.3.
* FLPD cache invalidation is performed with TLB invalidation
* by VPN without blocking. It is safe to invalidate TLB without
* blocking because the target address of TLB invalidation is
* not currently mapped.
*/
if (need_flush_flpd_cache) {
struct sysmmu_drvdata *data;
spin_lock(&domain->lock);
list_for_each_entry(data, &domain->clients, domain_node)
sysmmu_tlb_invalidate_flpdcache(data, iova);
spin_unlock(&domain->lock);
iommu/exynos: Apply workaround of caching fault page table entries This patch contains 2 workaround for the System MMU v3.x. System MMU v3.2 and v3.3 has FLPD cache that caches first level page table entries to reduce page table walking latency. However, the FLPD cache is filled with a first level page table entry even though it is not accessed by a master H/W because System MMU v3.3 speculatively prefetches page table entries that may be accessed in the near future by the master H/W. The prefetched FLPD cache entries are not invalidated by iommu_unmap() because iommu_unmap() only unmaps and invalidates the page table entries that is mapped. Because exynos-iommu driver discards a second level page table when it needs to be replaced with another second level page table or a first level page table entry with 1MB mapping, It is required to invalidate FLPD cache that may contain the first level page table entry that points to the second level page table. Another workaround of System MMU v3.3 is initializing the first level page table entries with the second level page table which is filled with all zeros. This prevents System MMU prefetches 'fault' first level page table entry which may lead page fault on access to 16MiB wide. System MMU 3.x fetches consecutive page table entries by a page table walking to maximize bus utilization and to minimize TLB miss panelty. Unfortunately, functional problem is raised with the fetching behavior because it fetches 'fault' page table entries that specifies no translation information and that a valid translation information will be written to in the near future. The logic in the System MMU generates page fault with the cached fault entries that is no longer coherent with the page table which is updated. There is another workaround that must be implemented by I/O virtual memory manager: any two consecutive I/O virtual memory area must have a hole between the two that is larger than or equal to 128KiB. Also, next I/O virtual memory area must be started from the next 128KiB boundary. 0 128K 256K 384K 512K |-------------|---------------|-----------------|----------------| |area1---------------->|.........hole...........|<--- area2 ----- The constraint is depicted above. The size is selected by the calculation followed: - System MMU can fetch consecutive 64 page table entries at once 64 * 4KiB = 256KiB. This is the size between 128K ~ 384K of the above picture. This style of fetching is 'block fetch'. It fetches the page table entries predefined consecutive page table entries including the entry that is the reason of the page table walking. - System MMU can prefetch upto consecutive 32 page table entries. This is the size between 256K ~ 384K. Signed-off-by: Cho KyongHo <pullip.cho@samsung.com> Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-05-12 14:15:04 +08:00
}
}
return page_entry(sent, iova);
}
static int lv1set_section(struct exynos_iommu_domain *domain,
iommu/exynos: Apply workaround of caching fault page table entries This patch contains 2 workaround for the System MMU v3.x. System MMU v3.2 and v3.3 has FLPD cache that caches first level page table entries to reduce page table walking latency. However, the FLPD cache is filled with a first level page table entry even though it is not accessed by a master H/W because System MMU v3.3 speculatively prefetches page table entries that may be accessed in the near future by the master H/W. The prefetched FLPD cache entries are not invalidated by iommu_unmap() because iommu_unmap() only unmaps and invalidates the page table entries that is mapped. Because exynos-iommu driver discards a second level page table when it needs to be replaced with another second level page table or a first level page table entry with 1MB mapping, It is required to invalidate FLPD cache that may contain the first level page table entry that points to the second level page table. Another workaround of System MMU v3.3 is initializing the first level page table entries with the second level page table which is filled with all zeros. This prevents System MMU prefetches 'fault' first level page table entry which may lead page fault on access to 16MiB wide. System MMU 3.x fetches consecutive page table entries by a page table walking to maximize bus utilization and to minimize TLB miss panelty. Unfortunately, functional problem is raised with the fetching behavior because it fetches 'fault' page table entries that specifies no translation information and that a valid translation information will be written to in the near future. The logic in the System MMU generates page fault with the cached fault entries that is no longer coherent with the page table which is updated. There is another workaround that must be implemented by I/O virtual memory manager: any two consecutive I/O virtual memory area must have a hole between the two that is larger than or equal to 128KiB. Also, next I/O virtual memory area must be started from the next 128KiB boundary. 0 128K 256K 384K 512K |-------------|---------------|-----------------|----------------| |area1---------------->|.........hole...........|<--- area2 ----- The constraint is depicted above. The size is selected by the calculation followed: - System MMU can fetch consecutive 64 page table entries at once 64 * 4KiB = 256KiB. This is the size between 128K ~ 384K of the above picture. This style of fetching is 'block fetch'. It fetches the page table entries predefined consecutive page table entries including the entry that is the reason of the page table walking. - System MMU can prefetch upto consecutive 32 page table entries. This is the size between 256K ~ 384K. Signed-off-by: Cho KyongHo <pullip.cho@samsung.com> Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-05-12 14:15:04 +08:00
sysmmu_pte_t *sent, sysmmu_iova_t iova,
phys_addr_t paddr, short *pgcnt)
{
if (lv1ent_section(sent)) {
WARN(1, "Trying mapping on 1MiB@%#08x that is mapped",
iova);
return -EADDRINUSE;
}
if (lv1ent_page(sent)) {
if (*pgcnt != NUM_LV2ENTRIES) {
WARN(1, "Trying mapping on 1MiB@%#08x that is mapped",
iova);
return -EADDRINUSE;
}
kmem_cache_free(lv2table_kmem_cache, page_entry(sent, 0));
*pgcnt = 0;
}
update_pte(sent, mk_lv1ent_sect(paddr));
spin_lock(&domain->lock);
iommu/exynos: Apply workaround of caching fault page table entries This patch contains 2 workaround for the System MMU v3.x. System MMU v3.2 and v3.3 has FLPD cache that caches first level page table entries to reduce page table walking latency. However, the FLPD cache is filled with a first level page table entry even though it is not accessed by a master H/W because System MMU v3.3 speculatively prefetches page table entries that may be accessed in the near future by the master H/W. The prefetched FLPD cache entries are not invalidated by iommu_unmap() because iommu_unmap() only unmaps and invalidates the page table entries that is mapped. Because exynos-iommu driver discards a second level page table when it needs to be replaced with another second level page table or a first level page table entry with 1MB mapping, It is required to invalidate FLPD cache that may contain the first level page table entry that points to the second level page table. Another workaround of System MMU v3.3 is initializing the first level page table entries with the second level page table which is filled with all zeros. This prevents System MMU prefetches 'fault' first level page table entry which may lead page fault on access to 16MiB wide. System MMU 3.x fetches consecutive page table entries by a page table walking to maximize bus utilization and to minimize TLB miss panelty. Unfortunately, functional problem is raised with the fetching behavior because it fetches 'fault' page table entries that specifies no translation information and that a valid translation information will be written to in the near future. The logic in the System MMU generates page fault with the cached fault entries that is no longer coherent with the page table which is updated. There is another workaround that must be implemented by I/O virtual memory manager: any two consecutive I/O virtual memory area must have a hole between the two that is larger than or equal to 128KiB. Also, next I/O virtual memory area must be started from the next 128KiB boundary. 0 128K 256K 384K 512K |-------------|---------------|-----------------|----------------| |area1---------------->|.........hole...........|<--- area2 ----- The constraint is depicted above. The size is selected by the calculation followed: - System MMU can fetch consecutive 64 page table entries at once 64 * 4KiB = 256KiB. This is the size between 128K ~ 384K of the above picture. This style of fetching is 'block fetch'. It fetches the page table entries predefined consecutive page table entries including the entry that is the reason of the page table walking. - System MMU can prefetch upto consecutive 32 page table entries. This is the size between 256K ~ 384K. Signed-off-by: Cho KyongHo <pullip.cho@samsung.com> Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-05-12 14:15:04 +08:00
if (lv1ent_page_zero(sent)) {
struct sysmmu_drvdata *data;
iommu/exynos: Apply workaround of caching fault page table entries This patch contains 2 workaround for the System MMU v3.x. System MMU v3.2 and v3.3 has FLPD cache that caches first level page table entries to reduce page table walking latency. However, the FLPD cache is filled with a first level page table entry even though it is not accessed by a master H/W because System MMU v3.3 speculatively prefetches page table entries that may be accessed in the near future by the master H/W. The prefetched FLPD cache entries are not invalidated by iommu_unmap() because iommu_unmap() only unmaps and invalidates the page table entries that is mapped. Because exynos-iommu driver discards a second level page table when it needs to be replaced with another second level page table or a first level page table entry with 1MB mapping, It is required to invalidate FLPD cache that may contain the first level page table entry that points to the second level page table. Another workaround of System MMU v3.3 is initializing the first level page table entries with the second level page table which is filled with all zeros. This prevents System MMU prefetches 'fault' first level page table entry which may lead page fault on access to 16MiB wide. System MMU 3.x fetches consecutive page table entries by a page table walking to maximize bus utilization and to minimize TLB miss panelty. Unfortunately, functional problem is raised with the fetching behavior because it fetches 'fault' page table entries that specifies no translation information and that a valid translation information will be written to in the near future. The logic in the System MMU generates page fault with the cached fault entries that is no longer coherent with the page table which is updated. There is another workaround that must be implemented by I/O virtual memory manager: any two consecutive I/O virtual memory area must have a hole between the two that is larger than or equal to 128KiB. Also, next I/O virtual memory area must be started from the next 128KiB boundary. 0 128K 256K 384K 512K |-------------|---------------|-----------------|----------------| |area1---------------->|.........hole...........|<--- area2 ----- The constraint is depicted above. The size is selected by the calculation followed: - System MMU can fetch consecutive 64 page table entries at once 64 * 4KiB = 256KiB. This is the size between 128K ~ 384K of the above picture. This style of fetching is 'block fetch'. It fetches the page table entries predefined consecutive page table entries including the entry that is the reason of the page table walking. - System MMU can prefetch upto consecutive 32 page table entries. This is the size between 256K ~ 384K. Signed-off-by: Cho KyongHo <pullip.cho@samsung.com> Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-05-12 14:15:04 +08:00
/*
* Flushing FLPD cache in System MMU v3.3 that may cache a FLPD
* entry by speculative prefetch of SLPD which has no mapping.
*/
list_for_each_entry(data, &domain->clients, domain_node)
sysmmu_tlb_invalidate_flpdcache(data, iova);
iommu/exynos: Apply workaround of caching fault page table entries This patch contains 2 workaround for the System MMU v3.x. System MMU v3.2 and v3.3 has FLPD cache that caches first level page table entries to reduce page table walking latency. However, the FLPD cache is filled with a first level page table entry even though it is not accessed by a master H/W because System MMU v3.3 speculatively prefetches page table entries that may be accessed in the near future by the master H/W. The prefetched FLPD cache entries are not invalidated by iommu_unmap() because iommu_unmap() only unmaps and invalidates the page table entries that is mapped. Because exynos-iommu driver discards a second level page table when it needs to be replaced with another second level page table or a first level page table entry with 1MB mapping, It is required to invalidate FLPD cache that may contain the first level page table entry that points to the second level page table. Another workaround of System MMU v3.3 is initializing the first level page table entries with the second level page table which is filled with all zeros. This prevents System MMU prefetches 'fault' first level page table entry which may lead page fault on access to 16MiB wide. System MMU 3.x fetches consecutive page table entries by a page table walking to maximize bus utilization and to minimize TLB miss panelty. Unfortunately, functional problem is raised with the fetching behavior because it fetches 'fault' page table entries that specifies no translation information and that a valid translation information will be written to in the near future. The logic in the System MMU generates page fault with the cached fault entries that is no longer coherent with the page table which is updated. There is another workaround that must be implemented by I/O virtual memory manager: any two consecutive I/O virtual memory area must have a hole between the two that is larger than or equal to 128KiB. Also, next I/O virtual memory area must be started from the next 128KiB boundary. 0 128K 256K 384K 512K |-------------|---------------|-----------------|----------------| |area1---------------->|.........hole...........|<--- area2 ----- The constraint is depicted above. The size is selected by the calculation followed: - System MMU can fetch consecutive 64 page table entries at once 64 * 4KiB = 256KiB. This is the size between 128K ~ 384K of the above picture. This style of fetching is 'block fetch'. It fetches the page table entries predefined consecutive page table entries including the entry that is the reason of the page table walking. - System MMU can prefetch upto consecutive 32 page table entries. This is the size between 256K ~ 384K. Signed-off-by: Cho KyongHo <pullip.cho@samsung.com> Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-05-12 14:15:04 +08:00
}
spin_unlock(&domain->lock);
iommu/exynos: Apply workaround of caching fault page table entries This patch contains 2 workaround for the System MMU v3.x. System MMU v3.2 and v3.3 has FLPD cache that caches first level page table entries to reduce page table walking latency. However, the FLPD cache is filled with a first level page table entry even though it is not accessed by a master H/W because System MMU v3.3 speculatively prefetches page table entries that may be accessed in the near future by the master H/W. The prefetched FLPD cache entries are not invalidated by iommu_unmap() because iommu_unmap() only unmaps and invalidates the page table entries that is mapped. Because exynos-iommu driver discards a second level page table when it needs to be replaced with another second level page table or a first level page table entry with 1MB mapping, It is required to invalidate FLPD cache that may contain the first level page table entry that points to the second level page table. Another workaround of System MMU v3.3 is initializing the first level page table entries with the second level page table which is filled with all zeros. This prevents System MMU prefetches 'fault' first level page table entry which may lead page fault on access to 16MiB wide. System MMU 3.x fetches consecutive page table entries by a page table walking to maximize bus utilization and to minimize TLB miss panelty. Unfortunately, functional problem is raised with the fetching behavior because it fetches 'fault' page table entries that specifies no translation information and that a valid translation information will be written to in the near future. The logic in the System MMU generates page fault with the cached fault entries that is no longer coherent with the page table which is updated. There is another workaround that must be implemented by I/O virtual memory manager: any two consecutive I/O virtual memory area must have a hole between the two that is larger than or equal to 128KiB. Also, next I/O virtual memory area must be started from the next 128KiB boundary. 0 128K 256K 384K 512K |-------------|---------------|-----------------|----------------| |area1---------------->|.........hole...........|<--- area2 ----- The constraint is depicted above. The size is selected by the calculation followed: - System MMU can fetch consecutive 64 page table entries at once 64 * 4KiB = 256KiB. This is the size between 128K ~ 384K of the above picture. This style of fetching is 'block fetch'. It fetches the page table entries predefined consecutive page table entries including the entry that is the reason of the page table walking. - System MMU can prefetch upto consecutive 32 page table entries. This is the size between 256K ~ 384K. Signed-off-by: Cho KyongHo <pullip.cho@samsung.com> Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-05-12 14:15:04 +08:00
return 0;
}
static int lv2set_page(sysmmu_pte_t *pent, phys_addr_t paddr, size_t size,
short *pgcnt)
{
if (size == SPAGE_SIZE) {
if (WARN_ON(!lv2ent_fault(pent)))
return -EADDRINUSE;
update_pte(pent, mk_lv2ent_spage(paddr));
*pgcnt -= 1;
} else { /* size == LPAGE_SIZE */
int i;
dma_addr_t pent_base = virt_to_phys(pent);
dma_sync_single_for_cpu(dma_dev, pent_base,
sizeof(*pent) * SPAGES_PER_LPAGE,
DMA_TO_DEVICE);
for (i = 0; i < SPAGES_PER_LPAGE; i++, pent++) {
if (WARN_ON(!lv2ent_fault(pent))) {
if (i > 0)
memset(pent - i, 0, sizeof(*pent) * i);
return -EADDRINUSE;
}
*pent = mk_lv2ent_lpage(paddr);
}
dma_sync_single_for_device(dma_dev, pent_base,
sizeof(*pent) * SPAGES_PER_LPAGE,
DMA_TO_DEVICE);
*pgcnt -= SPAGES_PER_LPAGE;
}
return 0;
}
iommu/exynos: Apply workaround of caching fault page table entries This patch contains 2 workaround for the System MMU v3.x. System MMU v3.2 and v3.3 has FLPD cache that caches first level page table entries to reduce page table walking latency. However, the FLPD cache is filled with a first level page table entry even though it is not accessed by a master H/W because System MMU v3.3 speculatively prefetches page table entries that may be accessed in the near future by the master H/W. The prefetched FLPD cache entries are not invalidated by iommu_unmap() because iommu_unmap() only unmaps and invalidates the page table entries that is mapped. Because exynos-iommu driver discards a second level page table when it needs to be replaced with another second level page table or a first level page table entry with 1MB mapping, It is required to invalidate FLPD cache that may contain the first level page table entry that points to the second level page table. Another workaround of System MMU v3.3 is initializing the first level page table entries with the second level page table which is filled with all zeros. This prevents System MMU prefetches 'fault' first level page table entry which may lead page fault on access to 16MiB wide. System MMU 3.x fetches consecutive page table entries by a page table walking to maximize bus utilization and to minimize TLB miss panelty. Unfortunately, functional problem is raised with the fetching behavior because it fetches 'fault' page table entries that specifies no translation information and that a valid translation information will be written to in the near future. The logic in the System MMU generates page fault with the cached fault entries that is no longer coherent with the page table which is updated. There is another workaround that must be implemented by I/O virtual memory manager: any two consecutive I/O virtual memory area must have a hole between the two that is larger than or equal to 128KiB. Also, next I/O virtual memory area must be started from the next 128KiB boundary. 0 128K 256K 384K 512K |-------------|---------------|-----------------|----------------| |area1---------------->|.........hole...........|<--- area2 ----- The constraint is depicted above. The size is selected by the calculation followed: - System MMU can fetch consecutive 64 page table entries at once 64 * 4KiB = 256KiB. This is the size between 128K ~ 384K of the above picture. This style of fetching is 'block fetch'. It fetches the page table entries predefined consecutive page table entries including the entry that is the reason of the page table walking. - System MMU can prefetch upto consecutive 32 page table entries. This is the size between 256K ~ 384K. Signed-off-by: Cho KyongHo <pullip.cho@samsung.com> Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-05-12 14:15:04 +08:00
/*
* *CAUTION* to the I/O virtual memory managers that support exynos-iommu:
*
* System MMU v3.x has advanced logic to improve address translation
iommu/exynos: Apply workaround of caching fault page table entries This patch contains 2 workaround for the System MMU v3.x. System MMU v3.2 and v3.3 has FLPD cache that caches first level page table entries to reduce page table walking latency. However, the FLPD cache is filled with a first level page table entry even though it is not accessed by a master H/W because System MMU v3.3 speculatively prefetches page table entries that may be accessed in the near future by the master H/W. The prefetched FLPD cache entries are not invalidated by iommu_unmap() because iommu_unmap() only unmaps and invalidates the page table entries that is mapped. Because exynos-iommu driver discards a second level page table when it needs to be replaced with another second level page table or a first level page table entry with 1MB mapping, It is required to invalidate FLPD cache that may contain the first level page table entry that points to the second level page table. Another workaround of System MMU v3.3 is initializing the first level page table entries with the second level page table which is filled with all zeros. This prevents System MMU prefetches 'fault' first level page table entry which may lead page fault on access to 16MiB wide. System MMU 3.x fetches consecutive page table entries by a page table walking to maximize bus utilization and to minimize TLB miss panelty. Unfortunately, functional problem is raised with the fetching behavior because it fetches 'fault' page table entries that specifies no translation information and that a valid translation information will be written to in the near future. The logic in the System MMU generates page fault with the cached fault entries that is no longer coherent with the page table which is updated. There is another workaround that must be implemented by I/O virtual memory manager: any two consecutive I/O virtual memory area must have a hole between the two that is larger than or equal to 128KiB. Also, next I/O virtual memory area must be started from the next 128KiB boundary. 0 128K 256K 384K 512K |-------------|---------------|-----------------|----------------| |area1---------------->|.........hole...........|<--- area2 ----- The constraint is depicted above. The size is selected by the calculation followed: - System MMU can fetch consecutive 64 page table entries at once 64 * 4KiB = 256KiB. This is the size between 128K ~ 384K of the above picture. This style of fetching is 'block fetch'. It fetches the page table entries predefined consecutive page table entries including the entry that is the reason of the page table walking. - System MMU can prefetch upto consecutive 32 page table entries. This is the size between 256K ~ 384K. Signed-off-by: Cho KyongHo <pullip.cho@samsung.com> Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-05-12 14:15:04 +08:00
* performance with caching more page table entries by a page table walk.
* However, the logic has a bug that while caching faulty page table entries,
* System MMU reports page fault if the cached fault entry is hit even though
* the fault entry is updated to a valid entry after the entry is cached.
* To prevent caching faulty page table entries which may be updated to valid
* entries later, the virtual memory manager should care about the workaround
* for the problem. The following describes the workaround.
iommu/exynos: Apply workaround of caching fault page table entries This patch contains 2 workaround for the System MMU v3.x. System MMU v3.2 and v3.3 has FLPD cache that caches first level page table entries to reduce page table walking latency. However, the FLPD cache is filled with a first level page table entry even though it is not accessed by a master H/W because System MMU v3.3 speculatively prefetches page table entries that may be accessed in the near future by the master H/W. The prefetched FLPD cache entries are not invalidated by iommu_unmap() because iommu_unmap() only unmaps and invalidates the page table entries that is mapped. Because exynos-iommu driver discards a second level page table when it needs to be replaced with another second level page table or a first level page table entry with 1MB mapping, It is required to invalidate FLPD cache that may contain the first level page table entry that points to the second level page table. Another workaround of System MMU v3.3 is initializing the first level page table entries with the second level page table which is filled with all zeros. This prevents System MMU prefetches 'fault' first level page table entry which may lead page fault on access to 16MiB wide. System MMU 3.x fetches consecutive page table entries by a page table walking to maximize bus utilization and to minimize TLB miss panelty. Unfortunately, functional problem is raised with the fetching behavior because it fetches 'fault' page table entries that specifies no translation information and that a valid translation information will be written to in the near future. The logic in the System MMU generates page fault with the cached fault entries that is no longer coherent with the page table which is updated. There is another workaround that must be implemented by I/O virtual memory manager: any two consecutive I/O virtual memory area must have a hole between the two that is larger than or equal to 128KiB. Also, next I/O virtual memory area must be started from the next 128KiB boundary. 0 128K 256K 384K 512K |-------------|---------------|-----------------|----------------| |area1---------------->|.........hole...........|<--- area2 ----- The constraint is depicted above. The size is selected by the calculation followed: - System MMU can fetch consecutive 64 page table entries at once 64 * 4KiB = 256KiB. This is the size between 128K ~ 384K of the above picture. This style of fetching is 'block fetch'. It fetches the page table entries predefined consecutive page table entries including the entry that is the reason of the page table walking. - System MMU can prefetch upto consecutive 32 page table entries. This is the size between 256K ~ 384K. Signed-off-by: Cho KyongHo <pullip.cho@samsung.com> Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-05-12 14:15:04 +08:00
*
* Any two consecutive I/O virtual address regions must have a hole of 128KiB
* at maximum to prevent misbehavior of System MMU 3.x (workaround for h/w bug).
iommu/exynos: Apply workaround of caching fault page table entries This patch contains 2 workaround for the System MMU v3.x. System MMU v3.2 and v3.3 has FLPD cache that caches first level page table entries to reduce page table walking latency. However, the FLPD cache is filled with a first level page table entry even though it is not accessed by a master H/W because System MMU v3.3 speculatively prefetches page table entries that may be accessed in the near future by the master H/W. The prefetched FLPD cache entries are not invalidated by iommu_unmap() because iommu_unmap() only unmaps and invalidates the page table entries that is mapped. Because exynos-iommu driver discards a second level page table when it needs to be replaced with another second level page table or a first level page table entry with 1MB mapping, It is required to invalidate FLPD cache that may contain the first level page table entry that points to the second level page table. Another workaround of System MMU v3.3 is initializing the first level page table entries with the second level page table which is filled with all zeros. This prevents System MMU prefetches 'fault' first level page table entry which may lead page fault on access to 16MiB wide. System MMU 3.x fetches consecutive page table entries by a page table walking to maximize bus utilization and to minimize TLB miss panelty. Unfortunately, functional problem is raised with the fetching behavior because it fetches 'fault' page table entries that specifies no translation information and that a valid translation information will be written to in the near future. The logic in the System MMU generates page fault with the cached fault entries that is no longer coherent with the page table which is updated. There is another workaround that must be implemented by I/O virtual memory manager: any two consecutive I/O virtual memory area must have a hole between the two that is larger than or equal to 128KiB. Also, next I/O virtual memory area must be started from the next 128KiB boundary. 0 128K 256K 384K 512K |-------------|---------------|-----------------|----------------| |area1---------------->|.........hole...........|<--- area2 ----- The constraint is depicted above. The size is selected by the calculation followed: - System MMU can fetch consecutive 64 page table entries at once 64 * 4KiB = 256KiB. This is the size between 128K ~ 384K of the above picture. This style of fetching is 'block fetch'. It fetches the page table entries predefined consecutive page table entries including the entry that is the reason of the page table walking. - System MMU can prefetch upto consecutive 32 page table entries. This is the size between 256K ~ 384K. Signed-off-by: Cho KyongHo <pullip.cho@samsung.com> Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-05-12 14:15:04 +08:00
*
* Precisely, any start address of I/O virtual region must be aligned with
iommu/exynos: Apply workaround of caching fault page table entries This patch contains 2 workaround for the System MMU v3.x. System MMU v3.2 and v3.3 has FLPD cache that caches first level page table entries to reduce page table walking latency. However, the FLPD cache is filled with a first level page table entry even though it is not accessed by a master H/W because System MMU v3.3 speculatively prefetches page table entries that may be accessed in the near future by the master H/W. The prefetched FLPD cache entries are not invalidated by iommu_unmap() because iommu_unmap() only unmaps and invalidates the page table entries that is mapped. Because exynos-iommu driver discards a second level page table when it needs to be replaced with another second level page table or a first level page table entry with 1MB mapping, It is required to invalidate FLPD cache that may contain the first level page table entry that points to the second level page table. Another workaround of System MMU v3.3 is initializing the first level page table entries with the second level page table which is filled with all zeros. This prevents System MMU prefetches 'fault' first level page table entry which may lead page fault on access to 16MiB wide. System MMU 3.x fetches consecutive page table entries by a page table walking to maximize bus utilization and to minimize TLB miss panelty. Unfortunately, functional problem is raised with the fetching behavior because it fetches 'fault' page table entries that specifies no translation information and that a valid translation information will be written to in the near future. The logic in the System MMU generates page fault with the cached fault entries that is no longer coherent with the page table which is updated. There is another workaround that must be implemented by I/O virtual memory manager: any two consecutive I/O virtual memory area must have a hole between the two that is larger than or equal to 128KiB. Also, next I/O virtual memory area must be started from the next 128KiB boundary. 0 128K 256K 384K 512K |-------------|---------------|-----------------|----------------| |area1---------------->|.........hole...........|<--- area2 ----- The constraint is depicted above. The size is selected by the calculation followed: - System MMU can fetch consecutive 64 page table entries at once 64 * 4KiB = 256KiB. This is the size between 128K ~ 384K of the above picture. This style of fetching is 'block fetch'. It fetches the page table entries predefined consecutive page table entries including the entry that is the reason of the page table walking. - System MMU can prefetch upto consecutive 32 page table entries. This is the size between 256K ~ 384K. Signed-off-by: Cho KyongHo <pullip.cho@samsung.com> Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-05-12 14:15:04 +08:00
* the following sizes for System MMU v3.1 and v3.2.
* System MMU v3.1: 128KiB
* System MMU v3.2: 256KiB
*
* Because System MMU v3.3 caches page table entries more aggressively, it needs
* more workarounds.
* - Any two consecutive I/O virtual regions must have a hole of size larger
* than or equal to 128KiB.
iommu/exynos: Apply workaround of caching fault page table entries This patch contains 2 workaround for the System MMU v3.x. System MMU v3.2 and v3.3 has FLPD cache that caches first level page table entries to reduce page table walking latency. However, the FLPD cache is filled with a first level page table entry even though it is not accessed by a master H/W because System MMU v3.3 speculatively prefetches page table entries that may be accessed in the near future by the master H/W. The prefetched FLPD cache entries are not invalidated by iommu_unmap() because iommu_unmap() only unmaps and invalidates the page table entries that is mapped. Because exynos-iommu driver discards a second level page table when it needs to be replaced with another second level page table or a first level page table entry with 1MB mapping, It is required to invalidate FLPD cache that may contain the first level page table entry that points to the second level page table. Another workaround of System MMU v3.3 is initializing the first level page table entries with the second level page table which is filled with all zeros. This prevents System MMU prefetches 'fault' first level page table entry which may lead page fault on access to 16MiB wide. System MMU 3.x fetches consecutive page table entries by a page table walking to maximize bus utilization and to minimize TLB miss panelty. Unfortunately, functional problem is raised with the fetching behavior because it fetches 'fault' page table entries that specifies no translation information and that a valid translation information will be written to in the near future. The logic in the System MMU generates page fault with the cached fault entries that is no longer coherent with the page table which is updated. There is another workaround that must be implemented by I/O virtual memory manager: any two consecutive I/O virtual memory area must have a hole between the two that is larger than or equal to 128KiB. Also, next I/O virtual memory area must be started from the next 128KiB boundary. 0 128K 256K 384K 512K |-------------|---------------|-----------------|----------------| |area1---------------->|.........hole...........|<--- area2 ----- The constraint is depicted above. The size is selected by the calculation followed: - System MMU can fetch consecutive 64 page table entries at once 64 * 4KiB = 256KiB. This is the size between 128K ~ 384K of the above picture. This style of fetching is 'block fetch'. It fetches the page table entries predefined consecutive page table entries including the entry that is the reason of the page table walking. - System MMU can prefetch upto consecutive 32 page table entries. This is the size between 256K ~ 384K. Signed-off-by: Cho KyongHo <pullip.cho@samsung.com> Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-05-12 14:15:04 +08:00
* - Start address of an I/O virtual region must be aligned by 128KiB.
*/
static int exynos_iommu_map(struct iommu_domain *iommu_domain,
unsigned long l_iova, phys_addr_t paddr, size_t size,
int prot)
{
struct exynos_iommu_domain *domain = to_exynos_domain(iommu_domain);
sysmmu_pte_t *entry;
sysmmu_iova_t iova = (sysmmu_iova_t)l_iova;
unsigned long flags;
int ret = -ENOMEM;
BUG_ON(domain->pgtable == NULL);
spin_lock_irqsave(&domain->pgtablelock, flags);
entry = section_entry(domain->pgtable, iova);
if (size == SECT_SIZE) {
ret = lv1set_section(domain, entry, iova, paddr,
&domain->lv2entcnt[lv1ent_offset(iova)]);
} else {
sysmmu_pte_t *pent;
pent = alloc_lv2entry(domain, entry, iova,
&domain->lv2entcnt[lv1ent_offset(iova)]);
if (IS_ERR(pent))
ret = PTR_ERR(pent);
else
ret = lv2set_page(pent, paddr, size,
&domain->lv2entcnt[lv1ent_offset(iova)]);
}
if (ret)
pr_err("%s: Failed(%d) to map %#zx bytes @ %#x\n",
__func__, ret, size, iova);
spin_unlock_irqrestore(&domain->pgtablelock, flags);
return ret;
}
static void exynos_iommu_tlb_invalidate_entry(struct exynos_iommu_domain *domain,
sysmmu_iova_t iova, size_t size)
iommu/exynos: Apply workaround of caching fault page table entries This patch contains 2 workaround for the System MMU v3.x. System MMU v3.2 and v3.3 has FLPD cache that caches first level page table entries to reduce page table walking latency. However, the FLPD cache is filled with a first level page table entry even though it is not accessed by a master H/W because System MMU v3.3 speculatively prefetches page table entries that may be accessed in the near future by the master H/W. The prefetched FLPD cache entries are not invalidated by iommu_unmap() because iommu_unmap() only unmaps and invalidates the page table entries that is mapped. Because exynos-iommu driver discards a second level page table when it needs to be replaced with another second level page table or a first level page table entry with 1MB mapping, It is required to invalidate FLPD cache that may contain the first level page table entry that points to the second level page table. Another workaround of System MMU v3.3 is initializing the first level page table entries with the second level page table which is filled with all zeros. This prevents System MMU prefetches 'fault' first level page table entry which may lead page fault on access to 16MiB wide. System MMU 3.x fetches consecutive page table entries by a page table walking to maximize bus utilization and to minimize TLB miss panelty. Unfortunately, functional problem is raised with the fetching behavior because it fetches 'fault' page table entries that specifies no translation information and that a valid translation information will be written to in the near future. The logic in the System MMU generates page fault with the cached fault entries that is no longer coherent with the page table which is updated. There is another workaround that must be implemented by I/O virtual memory manager: any two consecutive I/O virtual memory area must have a hole between the two that is larger than or equal to 128KiB. Also, next I/O virtual memory area must be started from the next 128KiB boundary. 0 128K 256K 384K 512K |-------------|---------------|-----------------|----------------| |area1---------------->|.........hole...........|<--- area2 ----- The constraint is depicted above. The size is selected by the calculation followed: - System MMU can fetch consecutive 64 page table entries at once 64 * 4KiB = 256KiB. This is the size between 128K ~ 384K of the above picture. This style of fetching is 'block fetch'. It fetches the page table entries predefined consecutive page table entries including the entry that is the reason of the page table walking. - System MMU can prefetch upto consecutive 32 page table entries. This is the size between 256K ~ 384K. Signed-off-by: Cho KyongHo <pullip.cho@samsung.com> Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-05-12 14:15:04 +08:00
{
struct sysmmu_drvdata *data;
iommu/exynos: Apply workaround of caching fault page table entries This patch contains 2 workaround for the System MMU v3.x. System MMU v3.2 and v3.3 has FLPD cache that caches first level page table entries to reduce page table walking latency. However, the FLPD cache is filled with a first level page table entry even though it is not accessed by a master H/W because System MMU v3.3 speculatively prefetches page table entries that may be accessed in the near future by the master H/W. The prefetched FLPD cache entries are not invalidated by iommu_unmap() because iommu_unmap() only unmaps and invalidates the page table entries that is mapped. Because exynos-iommu driver discards a second level page table when it needs to be replaced with another second level page table or a first level page table entry with 1MB mapping, It is required to invalidate FLPD cache that may contain the first level page table entry that points to the second level page table. Another workaround of System MMU v3.3 is initializing the first level page table entries with the second level page table which is filled with all zeros. This prevents System MMU prefetches 'fault' first level page table entry which may lead page fault on access to 16MiB wide. System MMU 3.x fetches consecutive page table entries by a page table walking to maximize bus utilization and to minimize TLB miss panelty. Unfortunately, functional problem is raised with the fetching behavior because it fetches 'fault' page table entries that specifies no translation information and that a valid translation information will be written to in the near future. The logic in the System MMU generates page fault with the cached fault entries that is no longer coherent with the page table which is updated. There is another workaround that must be implemented by I/O virtual memory manager: any two consecutive I/O virtual memory area must have a hole between the two that is larger than or equal to 128KiB. Also, next I/O virtual memory area must be started from the next 128KiB boundary. 0 128K 256K 384K 512K |-------------|---------------|-----------------|----------------| |area1---------------->|.........hole...........|<--- area2 ----- The constraint is depicted above. The size is selected by the calculation followed: - System MMU can fetch consecutive 64 page table entries at once 64 * 4KiB = 256KiB. This is the size between 128K ~ 384K of the above picture. This style of fetching is 'block fetch'. It fetches the page table entries predefined consecutive page table entries including the entry that is the reason of the page table walking. - System MMU can prefetch upto consecutive 32 page table entries. This is the size between 256K ~ 384K. Signed-off-by: Cho KyongHo <pullip.cho@samsung.com> Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-05-12 14:15:04 +08:00
unsigned long flags;
spin_lock_irqsave(&domain->lock, flags);
iommu/exynos: Apply workaround of caching fault page table entries This patch contains 2 workaround for the System MMU v3.x. System MMU v3.2 and v3.3 has FLPD cache that caches first level page table entries to reduce page table walking latency. However, the FLPD cache is filled with a first level page table entry even though it is not accessed by a master H/W because System MMU v3.3 speculatively prefetches page table entries that may be accessed in the near future by the master H/W. The prefetched FLPD cache entries are not invalidated by iommu_unmap() because iommu_unmap() only unmaps and invalidates the page table entries that is mapped. Because exynos-iommu driver discards a second level page table when it needs to be replaced with another second level page table or a first level page table entry with 1MB mapping, It is required to invalidate FLPD cache that may contain the first level page table entry that points to the second level page table. Another workaround of System MMU v3.3 is initializing the first level page table entries with the second level page table which is filled with all zeros. This prevents System MMU prefetches 'fault' first level page table entry which may lead page fault on access to 16MiB wide. System MMU 3.x fetches consecutive page table entries by a page table walking to maximize bus utilization and to minimize TLB miss panelty. Unfortunately, functional problem is raised with the fetching behavior because it fetches 'fault' page table entries that specifies no translation information and that a valid translation information will be written to in the near future. The logic in the System MMU generates page fault with the cached fault entries that is no longer coherent with the page table which is updated. There is another workaround that must be implemented by I/O virtual memory manager: any two consecutive I/O virtual memory area must have a hole between the two that is larger than or equal to 128KiB. Also, next I/O virtual memory area must be started from the next 128KiB boundary. 0 128K 256K 384K 512K |-------------|---------------|-----------------|----------------| |area1---------------->|.........hole...........|<--- area2 ----- The constraint is depicted above. The size is selected by the calculation followed: - System MMU can fetch consecutive 64 page table entries at once 64 * 4KiB = 256KiB. This is the size between 128K ~ 384K of the above picture. This style of fetching is 'block fetch'. It fetches the page table entries predefined consecutive page table entries including the entry that is the reason of the page table walking. - System MMU can prefetch upto consecutive 32 page table entries. This is the size between 256K ~ 384K. Signed-off-by: Cho KyongHo <pullip.cho@samsung.com> Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-05-12 14:15:04 +08:00
list_for_each_entry(data, &domain->clients, domain_node)
sysmmu_tlb_invalidate_entry(data, iova, size);
iommu/exynos: Apply workaround of caching fault page table entries This patch contains 2 workaround for the System MMU v3.x. System MMU v3.2 and v3.3 has FLPD cache that caches first level page table entries to reduce page table walking latency. However, the FLPD cache is filled with a first level page table entry even though it is not accessed by a master H/W because System MMU v3.3 speculatively prefetches page table entries that may be accessed in the near future by the master H/W. The prefetched FLPD cache entries are not invalidated by iommu_unmap() because iommu_unmap() only unmaps and invalidates the page table entries that is mapped. Because exynos-iommu driver discards a second level page table when it needs to be replaced with another second level page table or a first level page table entry with 1MB mapping, It is required to invalidate FLPD cache that may contain the first level page table entry that points to the second level page table. Another workaround of System MMU v3.3 is initializing the first level page table entries with the second level page table which is filled with all zeros. This prevents System MMU prefetches 'fault' first level page table entry which may lead page fault on access to 16MiB wide. System MMU 3.x fetches consecutive page table entries by a page table walking to maximize bus utilization and to minimize TLB miss panelty. Unfortunately, functional problem is raised with the fetching behavior because it fetches 'fault' page table entries that specifies no translation information and that a valid translation information will be written to in the near future. The logic in the System MMU generates page fault with the cached fault entries that is no longer coherent with the page table which is updated. There is another workaround that must be implemented by I/O virtual memory manager: any two consecutive I/O virtual memory area must have a hole between the two that is larger than or equal to 128KiB. Also, next I/O virtual memory area must be started from the next 128KiB boundary. 0 128K 256K 384K 512K |-------------|---------------|-----------------|----------------| |area1---------------->|.........hole...........|<--- area2 ----- The constraint is depicted above. The size is selected by the calculation followed: - System MMU can fetch consecutive 64 page table entries at once 64 * 4KiB = 256KiB. This is the size between 128K ~ 384K of the above picture. This style of fetching is 'block fetch'. It fetches the page table entries predefined consecutive page table entries including the entry that is the reason of the page table walking. - System MMU can prefetch upto consecutive 32 page table entries. This is the size between 256K ~ 384K. Signed-off-by: Cho KyongHo <pullip.cho@samsung.com> Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-05-12 14:15:04 +08:00
spin_unlock_irqrestore(&domain->lock, flags);
iommu/exynos: Apply workaround of caching fault page table entries This patch contains 2 workaround for the System MMU v3.x. System MMU v3.2 and v3.3 has FLPD cache that caches first level page table entries to reduce page table walking latency. However, the FLPD cache is filled with a first level page table entry even though it is not accessed by a master H/W because System MMU v3.3 speculatively prefetches page table entries that may be accessed in the near future by the master H/W. The prefetched FLPD cache entries are not invalidated by iommu_unmap() because iommu_unmap() only unmaps and invalidates the page table entries that is mapped. Because exynos-iommu driver discards a second level page table when it needs to be replaced with another second level page table or a first level page table entry with 1MB mapping, It is required to invalidate FLPD cache that may contain the first level page table entry that points to the second level page table. Another workaround of System MMU v3.3 is initializing the first level page table entries with the second level page table which is filled with all zeros. This prevents System MMU prefetches 'fault' first level page table entry which may lead page fault on access to 16MiB wide. System MMU 3.x fetches consecutive page table entries by a page table walking to maximize bus utilization and to minimize TLB miss panelty. Unfortunately, functional problem is raised with the fetching behavior because it fetches 'fault' page table entries that specifies no translation information and that a valid translation information will be written to in the near future. The logic in the System MMU generates page fault with the cached fault entries that is no longer coherent with the page table which is updated. There is another workaround that must be implemented by I/O virtual memory manager: any two consecutive I/O virtual memory area must have a hole between the two that is larger than or equal to 128KiB. Also, next I/O virtual memory area must be started from the next 128KiB boundary. 0 128K 256K 384K 512K |-------------|---------------|-----------------|----------------| |area1---------------->|.........hole...........|<--- area2 ----- The constraint is depicted above. The size is selected by the calculation followed: - System MMU can fetch consecutive 64 page table entries at once 64 * 4KiB = 256KiB. This is the size between 128K ~ 384K of the above picture. This style of fetching is 'block fetch'. It fetches the page table entries predefined consecutive page table entries including the entry that is the reason of the page table walking. - System MMU can prefetch upto consecutive 32 page table entries. This is the size between 256K ~ 384K. Signed-off-by: Cho KyongHo <pullip.cho@samsung.com> Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-05-12 14:15:04 +08:00
}
static size_t exynos_iommu_unmap(struct iommu_domain *iommu_domain,
unsigned long l_iova, size_t size)
{
struct exynos_iommu_domain *domain = to_exynos_domain(iommu_domain);
sysmmu_iova_t iova = (sysmmu_iova_t)l_iova;
sysmmu_pte_t *ent;
size_t err_pgsize;
unsigned long flags;
BUG_ON(domain->pgtable == NULL);
spin_lock_irqsave(&domain->pgtablelock, flags);
ent = section_entry(domain->pgtable, iova);
if (lv1ent_section(ent)) {
if (WARN_ON(size < SECT_SIZE)) {
err_pgsize = SECT_SIZE;
goto err;
}
/* workaround for h/w bug in System MMU v3.3 */
update_pte(ent, ZERO_LV2LINK);
size = SECT_SIZE;
goto done;
}
if (unlikely(lv1ent_fault(ent))) {
if (size > SECT_SIZE)
size = SECT_SIZE;
goto done;
}
/* lv1ent_page(sent) == true here */
ent = page_entry(ent, iova);
if (unlikely(lv2ent_fault(ent))) {
size = SPAGE_SIZE;
goto done;
}
if (lv2ent_small(ent)) {
update_pte(ent, 0);
size = SPAGE_SIZE;
domain->lv2entcnt[lv1ent_offset(iova)] += 1;
goto done;
}
/* lv1ent_large(ent) == true here */
if (WARN_ON(size < LPAGE_SIZE)) {
err_pgsize = LPAGE_SIZE;
goto err;
}
dma_sync_single_for_cpu(dma_dev, virt_to_phys(ent),
sizeof(*ent) * SPAGES_PER_LPAGE,
DMA_TO_DEVICE);
memset(ent, 0, sizeof(*ent) * SPAGES_PER_LPAGE);
dma_sync_single_for_device(dma_dev, virt_to_phys(ent),
sizeof(*ent) * SPAGES_PER_LPAGE,
DMA_TO_DEVICE);
size = LPAGE_SIZE;
domain->lv2entcnt[lv1ent_offset(iova)] += SPAGES_PER_LPAGE;
done:
spin_unlock_irqrestore(&domain->pgtablelock, flags);
exynos_iommu_tlb_invalidate_entry(domain, iova, size);
return size;
err:
spin_unlock_irqrestore(&domain->pgtablelock, flags);
pr_err("%s: Failed: size(%#zx) @ %#x is smaller than page size %#zx\n",
__func__, size, iova, err_pgsize);
return 0;
}
static phys_addr_t exynos_iommu_iova_to_phys(struct iommu_domain *iommu_domain,
dma_addr_t iova)
{
struct exynos_iommu_domain *domain = to_exynos_domain(iommu_domain);
sysmmu_pte_t *entry;
unsigned long flags;
phys_addr_t phys = 0;
spin_lock_irqsave(&domain->pgtablelock, flags);
entry = section_entry(domain->pgtable, iova);
if (lv1ent_section(entry)) {
phys = section_phys(entry) + section_offs(iova);
} else if (lv1ent_page(entry)) {
entry = page_entry(entry, iova);
if (lv2ent_large(entry))
phys = lpage_phys(entry) + lpage_offs(iova);
else if (lv2ent_small(entry))
phys = spage_phys(entry) + spage_offs(iova);
}
spin_unlock_irqrestore(&domain->pgtablelock, flags);
return phys;
}
static struct iommu_group *get_device_iommu_group(struct device *dev)
{
struct iommu_group *group;
group = iommu_group_get(dev);
if (!group)
group = iommu_group_alloc();
return group;
}
static int exynos_iommu_add_device(struct device *dev)
{
struct iommu_group *group;
if (!has_sysmmu(dev))
return -ENODEV;
group = iommu_group_get_for_dev(dev);
if (IS_ERR(group))
return PTR_ERR(group);
iommu_group_put(group);
return 0;
}
static void exynos_iommu_remove_device(struct device *dev)
{
if (!has_sysmmu(dev))
return;
iommu_group_remove_device(dev);
}
static int exynos_iommu_of_xlate(struct device *dev,
struct of_phandle_args *spec)
{
struct exynos_iommu_owner *owner = dev->archdata.iommu;
struct platform_device *sysmmu = of_find_device_by_node(spec->np);
struct sysmmu_drvdata *data;
if (!sysmmu)
return -ENODEV;
data = platform_get_drvdata(sysmmu);
if (!data)
return -ENODEV;
if (!owner) {
owner = kzalloc(sizeof(*owner), GFP_KERNEL);
if (!owner)
return -ENOMEM;
INIT_LIST_HEAD(&owner->controllers);
dev->archdata.iommu = owner;
}
list_add_tail(&data->owner_node, &owner->controllers);
return 0;
}
static struct iommu_ops exynos_iommu_ops = {
.domain_alloc = exynos_iommu_domain_alloc,
.domain_free = exynos_iommu_domain_free,
.attach_dev = exynos_iommu_attach_device,
.detach_dev = exynos_iommu_detach_device,
.map = exynos_iommu_map,
.unmap = exynos_iommu_unmap,
.map_sg = default_iommu_map_sg,
.iova_to_phys = exynos_iommu_iova_to_phys,
.device_group = get_device_iommu_group,
.add_device = exynos_iommu_add_device,
.remove_device = exynos_iommu_remove_device,
.pgsize_bitmap = SECT_SIZE | LPAGE_SIZE | SPAGE_SIZE,
.of_xlate = exynos_iommu_of_xlate,
};
static bool init_done;
static int __init exynos_iommu_init(void)
{
int ret;
lv2table_kmem_cache = kmem_cache_create("exynos-iommu-lv2table",
LV2TABLE_SIZE, LV2TABLE_SIZE, 0, NULL);
if (!lv2table_kmem_cache) {
pr_err("%s: Failed to create kmem cache\n", __func__);
return -ENOMEM;
}
ret = platform_driver_register(&exynos_sysmmu_driver);
if (ret) {
pr_err("%s: Failed to register driver\n", __func__);
goto err_reg_driver;
}
iommu/exynos: Apply workaround of caching fault page table entries This patch contains 2 workaround for the System MMU v3.x. System MMU v3.2 and v3.3 has FLPD cache that caches first level page table entries to reduce page table walking latency. However, the FLPD cache is filled with a first level page table entry even though it is not accessed by a master H/W because System MMU v3.3 speculatively prefetches page table entries that may be accessed in the near future by the master H/W. The prefetched FLPD cache entries are not invalidated by iommu_unmap() because iommu_unmap() only unmaps and invalidates the page table entries that is mapped. Because exynos-iommu driver discards a second level page table when it needs to be replaced with another second level page table or a first level page table entry with 1MB mapping, It is required to invalidate FLPD cache that may contain the first level page table entry that points to the second level page table. Another workaround of System MMU v3.3 is initializing the first level page table entries with the second level page table which is filled with all zeros. This prevents System MMU prefetches 'fault' first level page table entry which may lead page fault on access to 16MiB wide. System MMU 3.x fetches consecutive page table entries by a page table walking to maximize bus utilization and to minimize TLB miss panelty. Unfortunately, functional problem is raised with the fetching behavior because it fetches 'fault' page table entries that specifies no translation information and that a valid translation information will be written to in the near future. The logic in the System MMU generates page fault with the cached fault entries that is no longer coherent with the page table which is updated. There is another workaround that must be implemented by I/O virtual memory manager: any two consecutive I/O virtual memory area must have a hole between the two that is larger than or equal to 128KiB. Also, next I/O virtual memory area must be started from the next 128KiB boundary. 0 128K 256K 384K 512K |-------------|---------------|-----------------|----------------| |area1---------------->|.........hole...........|<--- area2 ----- The constraint is depicted above. The size is selected by the calculation followed: - System MMU can fetch consecutive 64 page table entries at once 64 * 4KiB = 256KiB. This is the size between 128K ~ 384K of the above picture. This style of fetching is 'block fetch'. It fetches the page table entries predefined consecutive page table entries including the entry that is the reason of the page table walking. - System MMU can prefetch upto consecutive 32 page table entries. This is the size between 256K ~ 384K. Signed-off-by: Cho KyongHo <pullip.cho@samsung.com> Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-05-12 14:15:04 +08:00
zero_lv2_table = kmem_cache_zalloc(lv2table_kmem_cache, GFP_KERNEL);
if (zero_lv2_table == NULL) {
pr_err("%s: Failed to allocate zero level2 page table\n",
__func__);
ret = -ENOMEM;
goto err_zero_lv2;
}
ret = bus_set_iommu(&platform_bus_type, &exynos_iommu_ops);
if (ret) {
pr_err("%s: Failed to register exynos-iommu driver.\n",
__func__);
goto err_set_iommu;
}
init_done = true;
return 0;
err_set_iommu:
iommu/exynos: Apply workaround of caching fault page table entries This patch contains 2 workaround for the System MMU v3.x. System MMU v3.2 and v3.3 has FLPD cache that caches first level page table entries to reduce page table walking latency. However, the FLPD cache is filled with a first level page table entry even though it is not accessed by a master H/W because System MMU v3.3 speculatively prefetches page table entries that may be accessed in the near future by the master H/W. The prefetched FLPD cache entries are not invalidated by iommu_unmap() because iommu_unmap() only unmaps and invalidates the page table entries that is mapped. Because exynos-iommu driver discards a second level page table when it needs to be replaced with another second level page table or a first level page table entry with 1MB mapping, It is required to invalidate FLPD cache that may contain the first level page table entry that points to the second level page table. Another workaround of System MMU v3.3 is initializing the first level page table entries with the second level page table which is filled with all zeros. This prevents System MMU prefetches 'fault' first level page table entry which may lead page fault on access to 16MiB wide. System MMU 3.x fetches consecutive page table entries by a page table walking to maximize bus utilization and to minimize TLB miss panelty. Unfortunately, functional problem is raised with the fetching behavior because it fetches 'fault' page table entries that specifies no translation information and that a valid translation information will be written to in the near future. The logic in the System MMU generates page fault with the cached fault entries that is no longer coherent with the page table which is updated. There is another workaround that must be implemented by I/O virtual memory manager: any two consecutive I/O virtual memory area must have a hole between the two that is larger than or equal to 128KiB. Also, next I/O virtual memory area must be started from the next 128KiB boundary. 0 128K 256K 384K 512K |-------------|---------------|-----------------|----------------| |area1---------------->|.........hole...........|<--- area2 ----- The constraint is depicted above. The size is selected by the calculation followed: - System MMU can fetch consecutive 64 page table entries at once 64 * 4KiB = 256KiB. This is the size between 128K ~ 384K of the above picture. This style of fetching is 'block fetch'. It fetches the page table entries predefined consecutive page table entries including the entry that is the reason of the page table walking. - System MMU can prefetch upto consecutive 32 page table entries. This is the size between 256K ~ 384K. Signed-off-by: Cho KyongHo <pullip.cho@samsung.com> Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2014-05-12 14:15:04 +08:00
kmem_cache_free(lv2table_kmem_cache, zero_lv2_table);
err_zero_lv2:
platform_driver_unregister(&exynos_sysmmu_driver);
err_reg_driver:
kmem_cache_destroy(lv2table_kmem_cache);
return ret;
}
static int __init exynos_iommu_of_setup(struct device_node *np)
{
struct platform_device *pdev;
if (!init_done)
exynos_iommu_init();
pdev = of_platform_device_create(np, NULL, platform_bus_type.dev_root);
if (IS_ERR(pdev))
return PTR_ERR(pdev);
/*
* use the first registered sysmmu device for performing
* dma mapping operations on iommu page tables (cpu cache flush)
*/
if (!dma_dev)
dma_dev = &pdev->dev;
of_iommu_set_ops(np, &exynos_iommu_ops);
return 0;
}
IOMMU_OF_DECLARE(exynos_iommu_of, "samsung,exynos-sysmmu",
exynos_iommu_of_setup);