OpenCloudOS-Kernel/fs/xfs/xfs_icache.c

1805 lines
46 KiB
C
Raw Normal View History

/*
* Copyright (c) 2000-2005 Silicon Graphics, Inc.
* All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it would be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write the Free Software Foundation,
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "xfs.h"
#include "xfs_fs.h"
#include "xfs_format.h"
#include "xfs_log_format.h"
#include "xfs_trans_resv.h"
#include "xfs_sb.h"
#include "xfs_mount.h"
#include "xfs_inode.h"
#include "xfs_error.h"
#include "xfs_trans.h"
#include "xfs_trans_priv.h"
#include "xfs_inode_item.h"
#include "xfs_quota.h"
xfs: event tracing support Convert the old xfs tracing support that could only be used with the out of tree kdb and xfsidbg patches to use the generic event tracer. To use it make sure CONFIG_EVENT_TRACING is enabled and then enable all xfs trace channels by: echo 1 > /sys/kernel/debug/tracing/events/xfs/enable or alternatively enable single events by just doing the same in one event subdirectory, e.g. echo 1 > /sys/kernel/debug/tracing/events/xfs/xfs_ihold/enable or set more complex filters, etc. In Documentation/trace/events.txt all this is desctribed in more detail. To reads the events do a cat /sys/kernel/debug/tracing/trace Compared to the last posting this patch converts the tracing mostly to the one tracepoint per callsite model that other users of the new tracing facility also employ. This allows a very fine-grained control of the tracing, a cleaner output of the traces and also enables the perf tool to use each tracepoint as a virtual performance counter, allowing us to e.g. count how often certain workloads git various spots in XFS. Take a look at http://lwn.net/Articles/346470/ for some examples. Also the btree tracing isn't included at all yet, as it will require additional core tracing features not in mainline yet, I plan to deliver it later. And the really nice thing about this patch is that it actually removes many lines of code while adding this nice functionality: fs/xfs/Makefile | 8 fs/xfs/linux-2.6/xfs_acl.c | 1 fs/xfs/linux-2.6/xfs_aops.c | 52 - fs/xfs/linux-2.6/xfs_aops.h | 2 fs/xfs/linux-2.6/xfs_buf.c | 117 +-- fs/xfs/linux-2.6/xfs_buf.h | 33 fs/xfs/linux-2.6/xfs_fs_subr.c | 3 fs/xfs/linux-2.6/xfs_ioctl.c | 1 fs/xfs/linux-2.6/xfs_ioctl32.c | 1 fs/xfs/linux-2.6/xfs_iops.c | 1 fs/xfs/linux-2.6/xfs_linux.h | 1 fs/xfs/linux-2.6/xfs_lrw.c | 87 -- fs/xfs/linux-2.6/xfs_lrw.h | 45 - fs/xfs/linux-2.6/xfs_super.c | 104 --- fs/xfs/linux-2.6/xfs_super.h | 7 fs/xfs/linux-2.6/xfs_sync.c | 1 fs/xfs/linux-2.6/xfs_trace.c | 75 ++ fs/xfs/linux-2.6/xfs_trace.h | 1369 +++++++++++++++++++++++++++++++++++++++++ fs/xfs/linux-2.6/xfs_vnode.h | 4 fs/xfs/quota/xfs_dquot.c | 110 --- fs/xfs/quota/xfs_dquot.h | 21 fs/xfs/quota/xfs_qm.c | 40 - fs/xfs/quota/xfs_qm_syscalls.c | 4 fs/xfs/support/ktrace.c | 323 --------- fs/xfs/support/ktrace.h | 85 -- fs/xfs/xfs.h | 16 fs/xfs/xfs_ag.h | 14 fs/xfs/xfs_alloc.c | 230 +----- fs/xfs/xfs_alloc.h | 27 fs/xfs/xfs_alloc_btree.c | 1 fs/xfs/xfs_attr.c | 107 --- fs/xfs/xfs_attr.h | 10 fs/xfs/xfs_attr_leaf.c | 14 fs/xfs/xfs_attr_sf.h | 40 - fs/xfs/xfs_bmap.c | 507 +++------------ fs/xfs/xfs_bmap.h | 49 - fs/xfs/xfs_bmap_btree.c | 6 fs/xfs/xfs_btree.c | 5 fs/xfs/xfs_btree_trace.h | 17 fs/xfs/xfs_buf_item.c | 87 -- fs/xfs/xfs_buf_item.h | 20 fs/xfs/xfs_da_btree.c | 3 fs/xfs/xfs_da_btree.h | 7 fs/xfs/xfs_dfrag.c | 2 fs/xfs/xfs_dir2.c | 8 fs/xfs/xfs_dir2_block.c | 20 fs/xfs/xfs_dir2_leaf.c | 21 fs/xfs/xfs_dir2_node.c | 27 fs/xfs/xfs_dir2_sf.c | 26 fs/xfs/xfs_dir2_trace.c | 216 ------ fs/xfs/xfs_dir2_trace.h | 72 -- fs/xfs/xfs_filestream.c | 8 fs/xfs/xfs_fsops.c | 2 fs/xfs/xfs_iget.c | 111 --- fs/xfs/xfs_inode.c | 67 -- fs/xfs/xfs_inode.h | 76 -- fs/xfs/xfs_inode_item.c | 5 fs/xfs/xfs_iomap.c | 85 -- fs/xfs/xfs_iomap.h | 8 fs/xfs/xfs_log.c | 181 +---- fs/xfs/xfs_log_priv.h | 20 fs/xfs/xfs_log_recover.c | 1 fs/xfs/xfs_mount.c | 2 fs/xfs/xfs_quota.h | 8 fs/xfs/xfs_rename.c | 1 fs/xfs/xfs_rtalloc.c | 1 fs/xfs/xfs_rw.c | 3 fs/xfs/xfs_trans.h | 47 + fs/xfs/xfs_trans_buf.c | 62 - fs/xfs/xfs_vnodeops.c | 8 70 files changed, 2151 insertions(+), 2592 deletions(-) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-15 07:14:59 +08:00
#include "xfs_trace.h"
#include "xfs_icache.h"
#include "xfs_bmap_util.h"
xfs: run an eofblocks scan on ENOSPC/EDQUOT From: Brian Foster <bfoster@redhat.com> Speculative preallocation and and the associated throttling metrics assume we're working with large files on large filesystems. Users have reported inefficiencies in these mechanisms when we happen to be dealing with large files on smaller filesystems. This can occur because while prealloc throttling is aggressive under low free space conditions, it is not active until we reach 5% free space or less. For example, a 40GB filesystem has enough space for several files large enough to have multi-GB preallocations at any given time. If those files are slow growing, they might reserve preallocation for long periods of time as well as avoid the background scanner due to frequent modification. If a new file is written under these conditions, said file has no access to this already reserved space and premature ENOSPC is imminent. To handle this scenario, modify the buffered write ENOSPC handling and retry sequence to invoke an eofblocks scan. In the smaller filesystem scenario, the eofblocks scan resets the usage of preallocation such that when the 5% free space threshold is met, throttling effectively takes over to provide fair and efficient preallocation until legitimate ENOSPC. The eofblocks scan is selective based on the nature of the failure. For example, an EDQUOT failure in a particular quota will use a filtered scan for that quota. Because we don't know which quota might have caused an allocation failure at any given time, we include each applicable quota determined to be under low free space conditions in the scan. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-07-24 17:49:28 +08:00
#include "xfs_dquot_item.h"
#include "xfs_dquot.h"
#include "xfs_reflink.h"
#include <linux/kthread.h>
#include <linux/freezer.h>
#include <linux/iversion.h>
/*
* Allocate and initialise an xfs_inode.
*/
xfs: recovery of swap extents operations for CRC filesystems This is the recovery side of the btree block owner change operation performed by swapext on CRC enabled filesystems. We detect that an owner change is needed by the flag that has been placed on the inode log format flag field. Because the inode recovery is being replayed after the buffers that make up the BMBT in the given checkpoint, we can walk all the buffers and directly modify them when we see the flag set on an inode. Because the inode can be relogged and hence present in multiple chekpoints with the "change owner" flag set, we could do multiple passes across the inode to do this change. While this isn't optimal, we can't directly ignore the flag as there may be multiple independent swap extent operations being replayed on the same inode in different checkpoints so we can't ignore them. Further, because the owner change operation uses ordered buffers, we might have buffers that are newer on disk than the current checkpoint and so already have the owner changed in them. Hence we cannot just peek at a buffer in the tree and check that it has the correct owner and assume that the change was completed. So, for the moment just brute force the owner change every time we see an inode with the flag set. Note that we have to be careful here because the owner of the buffers may point to either the old owner or the new owner. Currently the verifier can't verify the owner directly, so there is no failure case here right now. If we verify the owner exactly in future, then we'll have to take this into account. This was tested in terms of normal operation via xfstests - all of the fsr tests now pass without failure. however, we really need to modify xfs/227 to stress v3 inodes correctly to ensure we fully cover this case for v5 filesystems. In terms of recovery testing, I used a hacked version of xfs_fsr that held the temp inode open for a few seconds before exiting so that the filesystem could be shut down with an open owner change recovery flags set on at least the temp inode. fsr leaves the temp inode unlinked and in btree format, so this was necessary for the owner change to be reliably replayed. logprint confirmed the tmp inode in the log had the correct flag set: INO: cnt:3 total:3 a:0x69e9e0 len:56 a:0x69ea20 len:176 a:0x69eae0 len:88 INODE: #regs:3 ino:0x44 flags:0x209 dsize:88 ^^^^^ 0x200 is set, indicating a data fork owner change needed to be replayed on inode 0x44. A printk in the revoery code confirmed that the inode change was recovered: XFS (vdc): Mounting Filesystem XFS (vdc): Starting recovery (logdev: internal) recovering owner change ino 0x44 XFS (vdc): Version 5 superblock detected. This kernel L support enabled! Use of these features in this kernel is at your own risk! XFS (vdc): Ending recovery (logdev: internal) The script used to test this was: $ cat ./recovery-fsr.sh #!/bin/bash dev=/dev/vdc mntpt=/mnt/scratch testfile=$mntpt/testfile umount $mntpt mkfs.xfs -f -m crc=1 $dev mount $dev $mntpt chmod 777 $mntpt for i in `seq 10000 -1 0`; do xfs_io -f -d -c "pwrite $(($i * 4096)) 4096" $testfile > /dev/null 2>&1 done xfs_bmap -vp $testfile |head -20 xfs_fsr -d -v $testfile & sleep 10 /home/dave/src/xfstests-dev/src/godown -f $mntpt wait umount $mntpt xfs_logprint -t $dev |tail -20 time mount $dev $mntpt xfs_bmap -vp $testfile umount $mntpt $ Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-30 08:23:45 +08:00
struct xfs_inode *
xfs_inode_alloc(
struct xfs_mount *mp,
xfs_ino_t ino)
{
struct xfs_inode *ip;
/*
* if this didn't occur in transactions, we could use
* KM_MAYFAIL and return NULL here on ENOMEM. Set the
* code up to do this anyway.
*/
ip = kmem_zone_alloc(xfs_inode_zone, KM_SLEEP);
if (!ip)
return NULL;
if (inode_init_always(mp->m_super, VFS_I(ip))) {
kmem_zone_free(xfs_inode_zone, ip);
return NULL;
}
/* VFS doesn't initialise i_mode! */
VFS_I(ip)->i_mode = 0;
XFS_STATS_INC(mp, vn_active);
ASSERT(atomic_read(&ip->i_pincount) == 0);
ASSERT(!xfs_isiflocked(ip));
ASSERT(ip->i_ino == 0);
/* initialise the xfs inode */
ip->i_ino = ino;
ip->i_mount = mp;
memset(&ip->i_imap, 0, sizeof(struct xfs_imap));
ip->i_afp = NULL;
ip->i_cowfp = NULL;
ip->i_cnextents = 0;
ip->i_cformat = XFS_DINODE_FMT_EXTENTS;
memset(&ip->i_df, 0, sizeof(xfs_ifork_t));
ip->i_flags = 0;
ip->i_delayed_blks = 0;
memset(&ip->i_d, 0, sizeof(ip->i_d));
return ip;
}
STATIC void
xfs_inode_free_callback(
struct rcu_head *head)
{
struct inode *inode = container_of(head, struct inode, i_rcu);
struct xfs_inode *ip = XFS_I(inode);
switch (VFS_I(ip)->i_mode & S_IFMT) {
case S_IFREG:
case S_IFDIR:
case S_IFLNK:
xfs_idestroy_fork(ip, XFS_DATA_FORK);
break;
}
if (ip->i_afp)
xfs_idestroy_fork(ip, XFS_ATTR_FORK);
if (ip->i_cowfp)
xfs_idestroy_fork(ip, XFS_COW_FORK);
if (ip->i_itemp) {
ASSERT(!(ip->i_itemp->ili_item.li_flags & XFS_LI_IN_AIL));
xfs_inode_item_destroy(ip);
ip->i_itemp = NULL;
}
xfs: xfs_inode_free() isn't RCU safe The xfs_inode freed in xfs_inode_free() has multiple allocated structures attached to it. We free these in xfs_inode_free() before we mark the inode as invalid, and before we run call_rcu() to queue the structure for freeing. Unfortunately, this freeing can race with other accesses that are in the RCU current grace period that have found the inode in the radix tree with a valid state. This includes xfs_iflush_cluster(), which calls xfs_inode_clean(), and that accesses the inode log item on the xfs_inode. The log item structure is freed in xfs_inode_free(), so there is the possibility we can be accessing freed memory in xfs_iflush_cluster() after validating the xfs_inode structure as being valid for this RCU context. Hence we can get spuriously incorrect clean state returned from such checks. This can lead to use thinking the inode is dirty when it is, in fact, clean, and so incorrectly attaching it to the buffer for IO and completion processing. This then leads to use-after-free situations on the xfs_inode itself if the IO completes after the current RCU grace period expires. The buffer callbacks will access the xfs_inode and try to do all sorts of things it shouldn't with freed memory. IOWs, xfs_iflush_cluster() only works correctly when racing with inode reclaim if the inode log item is present and correctly stating the inode is clean. If the inode is being freed, then reclaim has already made sure the inode is clean, and hence xfs_iflush_cluster can skip it. However, we are accessing the inode inode under RCU read lock protection and so also must ensure that all dynamically allocated memory we reference in this context is not freed until the RCU grace period expires. To fix this, move all the potential memory freeing into xfs_inode_free_callback() so that we are guarantee RCU protected lookup code will always have the memory structures it needs available during the RCU grace period that lookup races can occur in. Discovered-by: Brain Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-05-18 12:01:53 +08:00
kmem_zone_free(xfs_inode_zone, ip);
}
2016-05-18 12:09:12 +08:00
static void
__xfs_inode_free(
struct xfs_inode *ip)
{
/* asserts to verify all state is correct here */
ASSERT(atomic_read(&ip->i_pincount) == 0);
XFS_STATS_DEC(ip->i_mount, vn_active);
call_rcu(&VFS_I(ip)->i_rcu, xfs_inode_free_callback);
}
xfs: xfs_inode_free() isn't RCU safe The xfs_inode freed in xfs_inode_free() has multiple allocated structures attached to it. We free these in xfs_inode_free() before we mark the inode as invalid, and before we run call_rcu() to queue the structure for freeing. Unfortunately, this freeing can race with other accesses that are in the RCU current grace period that have found the inode in the radix tree with a valid state. This includes xfs_iflush_cluster(), which calls xfs_inode_clean(), and that accesses the inode log item on the xfs_inode. The log item structure is freed in xfs_inode_free(), so there is the possibility we can be accessing freed memory in xfs_iflush_cluster() after validating the xfs_inode structure as being valid for this RCU context. Hence we can get spuriously incorrect clean state returned from such checks. This can lead to use thinking the inode is dirty when it is, in fact, clean, and so incorrectly attaching it to the buffer for IO and completion processing. This then leads to use-after-free situations on the xfs_inode itself if the IO completes after the current RCU grace period expires. The buffer callbacks will access the xfs_inode and try to do all sorts of things it shouldn't with freed memory. IOWs, xfs_iflush_cluster() only works correctly when racing with inode reclaim if the inode log item is present and correctly stating the inode is clean. If the inode is being freed, then reclaim has already made sure the inode is clean, and hence xfs_iflush_cluster can skip it. However, we are accessing the inode inode under RCU read lock protection and so also must ensure that all dynamically allocated memory we reference in this context is not freed until the RCU grace period expires. To fix this, move all the potential memory freeing into xfs_inode_free_callback() so that we are guarantee RCU protected lookup code will always have the memory structures it needs available during the RCU grace period that lookup races can occur in. Discovered-by: Brain Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-05-18 12:01:53 +08:00
void
xfs_inode_free(
struct xfs_inode *ip)
{
ASSERT(!xfs_isiflocked(ip));
/*
* Because we use RCU freeing we need to ensure the inode always
* appears to be reclaimed with an invalid inode number when in the
* free state. The ip->i_flags_lock provides the barrier against lookup
* races.
*/
spin_lock(&ip->i_flags_lock);
ip->i_flags = XFS_IRECLAIM;
ip->i_ino = 0;
spin_unlock(&ip->i_flags_lock);
2016-05-18 12:09:12 +08:00
__xfs_inode_free(ip);
}
/*
* Queue a new inode reclaim pass if there are reclaimable inodes and there
* isn't a reclaim pass already in progress. By default it runs every 5s based
* on the xfs periodic sync default of 30s. Perhaps this should have it's own
* tunable, but that can be done if this method proves to be ineffective or too
* aggressive.
*/
static void
xfs_reclaim_work_queue(
struct xfs_mount *mp)
{
rcu_read_lock();
if (radix_tree_tagged(&mp->m_perag_tree, XFS_ICI_RECLAIM_TAG)) {
queue_delayed_work(mp->m_reclaim_workqueue, &mp->m_reclaim_work,
msecs_to_jiffies(xfs_syncd_centisecs / 6 * 10));
}
rcu_read_unlock();
}
/*
* This is a fast pass over the inode cache to try to get reclaim moving on as
* many inodes as possible in a short period of time. It kicks itself every few
* seconds, as well as being kicked by the inode cache shrinker when memory
* goes low. It scans as quickly as possible avoiding locked inodes or those
* already being flushed, and once done schedules a future pass.
*/
void
xfs_reclaim_worker(
struct work_struct *work)
{
struct xfs_mount *mp = container_of(to_delayed_work(work),
struct xfs_mount, m_reclaim_work);
xfs_reclaim_inodes(mp, SYNC_TRYLOCK);
xfs_reclaim_work_queue(mp);
}
static void
xfs_perag_set_reclaim_tag(
struct xfs_perag *pag)
{
struct xfs_mount *mp = pag->pag_mount;
lockdep_assert_held(&pag->pag_ici_lock);
if (pag->pag_ici_reclaimable++)
return;
/* propagate the reclaim tag up into the perag radix tree */
spin_lock(&mp->m_perag_lock);
radix_tree_tag_set(&mp->m_perag_tree, pag->pag_agno,
XFS_ICI_RECLAIM_TAG);
spin_unlock(&mp->m_perag_lock);
/* schedule periodic background inode reclaim */
xfs_reclaim_work_queue(mp);
trace_xfs_perag_set_reclaim(mp, pag->pag_agno, -1, _RET_IP_);
}
static void
xfs_perag_clear_reclaim_tag(
struct xfs_perag *pag)
{
struct xfs_mount *mp = pag->pag_mount;
lockdep_assert_held(&pag->pag_ici_lock);
if (--pag->pag_ici_reclaimable)
return;
/* clear the reclaim tag from the perag radix tree */
spin_lock(&mp->m_perag_lock);
radix_tree_tag_clear(&mp->m_perag_tree, pag->pag_agno,
XFS_ICI_RECLAIM_TAG);
spin_unlock(&mp->m_perag_lock);
trace_xfs_perag_clear_reclaim(mp, pag->pag_agno, -1, _RET_IP_);
}
/*
* We set the inode flag atomically with the radix tree tag.
* Once we get tag lookups on the radix tree, this inode flag
* can go away.
*/
void
xfs_inode_set_reclaim_tag(
struct xfs_inode *ip)
{
struct xfs_mount *mp = ip->i_mount;
struct xfs_perag *pag;
pag = xfs_perag_get(mp, XFS_INO_TO_AGNO(mp, ip->i_ino));
spin_lock(&pag->pag_ici_lock);
spin_lock(&ip->i_flags_lock);
radix_tree_tag_set(&pag->pag_ici_root, XFS_INO_TO_AGINO(mp, ip->i_ino),
XFS_ICI_RECLAIM_TAG);
xfs_perag_set_reclaim_tag(pag);
__xfs_iflags_set(ip, XFS_IRECLAIMABLE);
spin_unlock(&ip->i_flags_lock);
spin_unlock(&pag->pag_ici_lock);
xfs_perag_put(pag);
}
STATIC void
xfs_inode_clear_reclaim_tag(
struct xfs_perag *pag,
xfs_ino_t ino)
{
radix_tree_tag_clear(&pag->pag_ici_root,
XFS_INO_TO_AGINO(pag->pag_mount, ino),
XFS_ICI_RECLAIM_TAG);
xfs_perag_clear_reclaim_tag(pag);
}
static void
xfs_inew_wait(
struct xfs_inode *ip)
{
wait_queue_head_t *wq = bit_waitqueue(&ip->i_flags, __XFS_INEW_BIT);
DEFINE_WAIT_BIT(wait, &ip->i_flags, __XFS_INEW_BIT);
do {
prepare_to_wait(wq, &wait.wq_entry, TASK_UNINTERRUPTIBLE);
if (!xfs_iflags_test(ip, XFS_INEW))
break;
schedule();
} while (true);
finish_wait(wq, &wait.wq_entry);
}
/*
* When we recycle a reclaimable inode, we need to re-initialise the VFS inode
* part of the structure. This is made more complex by the fact we store
* information about the on-disk values in the VFS inode and so we can't just
* overwrite the values unconditionally. Hence we save the parameters we
* need to retain across reinitialisation, and rewrite them into the VFS inode
* after reinitialisation even if it fails.
*/
static int
xfs_reinit_inode(
struct xfs_mount *mp,
struct inode *inode)
{
int error;
uint32_t nlink = inode->i_nlink;
uint32_t generation = inode->i_generation;
uint64_t version = inode_peek_iversion(inode);
umode_t mode = inode->i_mode;
dev_t dev = inode->i_rdev;
error = inode_init_always(mp->m_super, inode);
set_nlink(inode, nlink);
inode->i_generation = generation;
inode_set_iversion_queried(inode, version);
inode->i_mode = mode;
inode->i_rdev = dev;
return error;
}
/*
* Check the validity of the inode we just found it the cache
*/
static int
xfs_iget_cache_hit(
struct xfs_perag *pag,
struct xfs_inode *ip,
xfs_ino_t ino,
int flags,
int lock_flags) __releases(RCU)
{
struct inode *inode = VFS_I(ip);
struct xfs_mount *mp = ip->i_mount;
int error;
/*
* check for re-use of an inode within an RCU grace period due to the
* radix tree nodes not being updated yet. We monitor for this by
* setting the inode number to zero before freeing the inode structure.
* If the inode has been reallocated and set up, then the inode number
* will not match, so check for that, too.
*/
spin_lock(&ip->i_flags_lock);
if (ip->i_ino != ino) {
trace_xfs_iget_skip(ip);
XFS_STATS_INC(mp, xs_ig_frecycle);
error = -EAGAIN;
goto out_error;
}
/*
* If we are racing with another cache hit that is currently
* instantiating this inode or currently recycling it out of
* reclaimabe state, wait for the initialisation to complete
* before continuing.
*
* XXX(hch): eventually we should do something equivalent to
* wait_on_inode to wait for these flags to be cleared
* instead of polling for it.
*/
if (ip->i_flags & (XFS_INEW|XFS_IRECLAIM)) {
trace_xfs_iget_skip(ip);
XFS_STATS_INC(mp, xs_ig_frecycle);
error = -EAGAIN;
goto out_error;
}
/*
* If lookup is racing with unlink return an error immediately.
*/
if (VFS_I(ip)->i_mode == 0 && !(flags & XFS_IGET_CREATE)) {
error = -ENOENT;
goto out_error;
}
/*
* If IRECLAIMABLE is set, we've torn down the VFS inode already.
* Need to carefully get it back into useable state.
*/
if (ip->i_flags & XFS_IRECLAIMABLE) {
trace_xfs_iget_reclaim(ip);
if (flags & XFS_IGET_INCORE) {
error = -EAGAIN;
goto out_error;
}
/*
* We need to set XFS_IRECLAIM to prevent xfs_reclaim_inode
* from stomping over us while we recycle the inode. We can't
* clear the radix tree reclaimable tag yet as it requires
* pag_ici_lock to be held exclusive.
*/
ip->i_flags |= XFS_IRECLAIM;
spin_unlock(&ip->i_flags_lock);
rcu_read_unlock();
error = xfs_reinit_inode(mp, inode);
if (error) {
bool wake;
/*
* Re-initializing the inode failed, and we are in deep
* trouble. Try to re-add it to the reclaim list.
*/
rcu_read_lock();
spin_lock(&ip->i_flags_lock);
wake = !!__xfs_iflags_test(ip, XFS_INEW);
ip->i_flags &= ~(XFS_INEW | XFS_IRECLAIM);
if (wake)
wake_up_bit(&ip->i_flags, __XFS_INEW_BIT);
ASSERT(ip->i_flags & XFS_IRECLAIMABLE);
trace_xfs_iget_reclaim_fail(ip);
goto out_error;
}
spin_lock(&pag->pag_ici_lock);
spin_lock(&ip->i_flags_lock);
/*
* Clear the per-lifetime state in the inode as we are now
* effectively a new inode and need to return to the initial
* state before reuse occurs.
*/
ip->i_flags &= ~XFS_IRECLAIM_RESET_FLAGS;
ip->i_flags |= XFS_INEW;
xfs_inode_clear_reclaim_tag(pag, ip->i_ino);
inode->i_state = I_NEW;
ASSERT(!rwsem_is_locked(&inode->i_rwsem));
init_rwsem(&inode->i_rwsem);
spin_unlock(&ip->i_flags_lock);
spin_unlock(&pag->pag_ici_lock);
} else {
/* If the VFS inode is being torn down, pause and try again. */
if (!igrab(inode)) {
trace_xfs_iget_skip(ip);
error = -EAGAIN;
goto out_error;
}
/* We've got a live one. */
spin_unlock(&ip->i_flags_lock);
rcu_read_unlock();
trace_xfs_iget_hit(ip);
}
if (lock_flags != 0)
xfs_ilock(ip, lock_flags);
if (!(flags & XFS_IGET_INCORE))
xfs_iflags_clear(ip, XFS_ISTALE | XFS_IDONTCACHE);
XFS_STATS_INC(mp, xs_ig_found);
return 0;
out_error:
spin_unlock(&ip->i_flags_lock);
rcu_read_unlock();
return error;
}
static int
xfs_iget_cache_miss(
struct xfs_mount *mp,
struct xfs_perag *pag,
xfs_trans_t *tp,
xfs_ino_t ino,
struct xfs_inode **ipp,
int flags,
int lock_flags)
{
struct xfs_inode *ip;
int error;
xfs_agino_t agino = XFS_INO_TO_AGINO(mp, ino);
int iflags;
ip = xfs_inode_alloc(mp, ino);
if (!ip)
return -ENOMEM;
error = xfs_iread(mp, tp, ip, flags);
if (error)
goto out_destroy;
if (!xfs_inode_verify_forks(ip)) {
error = -EFSCORRUPTED;
goto out_destroy;
}
trace_xfs_iget_miss(ip);
xfs: catch inode allocation state mismatch corruption We recently came across a V4 filesystem causing memory corruption due to a newly allocated inode being setup twice and being added to the superblock inode list twice. From code inspection, the only way this could happen is if a newly allocated inode was not marked as free on disk (i.e. di_mode wasn't zero). Running the metadump on an upstream debug kernel fails during inode allocation like so: XFS: Assertion failed: ip->i_d.di_nblocks == 0, file: fs/xfs/xfs_inod= e.c, line: 838 ------------[ cut here ]------------ kernel BUG at fs/xfs/xfs_message.c:114! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 11 PID: 3496 Comm: mkdir Not tainted 4.16.0-rc5-dgc #442 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/0= 1/2014 RIP: 0010:assfail+0x28/0x30 RSP: 0018:ffffc9000236fc80 EFLAGS: 00010202 RAX: 00000000ffffffea RBX: 0000000000004000 RCX: 0000000000000000 RDX: 00000000ffffffc0 RSI: 000000000000000a RDI: ffffffff8227211b RBP: ffffc9000236fce8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000bec R11: f000000000000000 R12: ffffc9000236fd30 R13: ffff8805c76bab80 R14: ffff8805c77ac800 R15: ffff88083fb12e10 FS: 00007fac8cbff040(0000) GS:ffff88083fd00000(0000) knlGS:0000000000000= 000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fffa6783ff8 CR3: 00000005c6e2b003 CR4: 00000000000606e0 Call Trace: xfs_ialloc+0x383/0x570 xfs_dir_ialloc+0x6a/0x2a0 xfs_create+0x412/0x670 xfs_generic_create+0x1f7/0x2c0 ? capable_wrt_inode_uidgid+0x3f/0x50 vfs_mkdir+0xfb/0x1b0 SyS_mkdir+0xcf/0xf0 do_syscall_64+0x73/0x1a0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 Extracting the inode number we crashed on from an event trace and looking at it with xfs_db: xfs_db> inode 184452204 xfs_db> p core.magic = 0x494e core.mode = 0100644 core.version = 2 core.format = 2 (extents) core.nlinkv2 = 1 core.onlink = 0 ..... Confirms that it is not a free inode on disk. xfs_repair also trips over this inode: ..... zero length extent (off = 0, fsbno = 0) in ino 184452204 correcting nextents for inode 184452204 bad attribute fork in inode 184452204, would clear attr fork bad nblocks 1 for inode 184452204, would reset to 0 bad anextents 1 for inode 184452204, would reset to 0 imap claims in-use inode 184452204 is free, would correct imap would have cleared inode 184452204 ..... disconnected inode 184452204, would move to lost+found And so we have a situation where the directory structure and the inobt thinks the inode is free, but the inode on disk thinks it is still in use. Where this corruption came from is not possible to diagnose, but we can detect it and prevent the kernel from oopsing on lookup. The reproducer now results in: $ sudo mkdir /mnt/scratch/{0,1,2,3,4,5}{0,1,2,3,4,5} mkdir: cannot create directory =E2=80=98/mnt/scratch/00=E2=80=99: File ex= ists mkdir: cannot create directory =E2=80=98/mnt/scratch/01=E2=80=99: File ex= ists mkdir: cannot create directory =E2=80=98/mnt/scratch/03=E2=80=99: Structu= re needs cleaning mkdir: cannot create directory =E2=80=98/mnt/scratch/04=E2=80=99: Input/o= utput error mkdir: cannot create directory =E2=80=98/mnt/scratch/05=E2=80=99: Input/o= utput error .... And this corruption shutdown: [ 54.843517] XFS (loop0): Corruption detected! Free inode 0xafe846c not= marked free on disk [ 54.845885] XFS (loop0): Internal error xfs_trans_cancel at line 1023 = of file fs/xfs/xfs_trans.c. Caller xfs_create+0x425/0x670 [ 54.848994] CPU: 10 PID: 3541 Comm: mkdir Not tainted 4.16.0-rc5-dgc #= 443 [ 54.850753] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIO= S 1.10.2-1 04/01/2014 [ 54.852859] Call Trace: [ 54.853531] dump_stack+0x85/0xc5 [ 54.854385] xfs_trans_cancel+0x197/0x1c0 [ 54.855421] xfs_create+0x425/0x670 [ 54.856314] xfs_generic_create+0x1f7/0x2c0 [ 54.857390] ? capable_wrt_inode_uidgid+0x3f/0x50 [ 54.858586] vfs_mkdir+0xfb/0x1b0 [ 54.859458] SyS_mkdir+0xcf/0xf0 [ 54.860254] do_syscall_64+0x73/0x1a0 [ 54.861193] entry_SYSCALL_64_after_hwframe+0x42/0xb7 [ 54.862492] RIP: 0033:0x7fb73bddf547 [ 54.863358] RSP: 002b:00007ffdaa553338 EFLAGS: 00000246 ORIG_RAX: 0000= 000000000053 [ 54.865133] RAX: ffffffffffffffda RBX: 00007ffdaa55449a RCX: 00007fb73= bddf547 [ 54.866766] RDX: 0000000000000001 RSI: 00000000000001ff RDI: 00007ffda= a55449a [ 54.868432] RBP: 00007ffdaa55449a R08: 00000000000001ff R09: 00005623a= 8670dd0 [ 54.870110] R10: 00007fb73be72d5b R11: 0000000000000246 R12: 000000000= 00001ff [ 54.871752] R13: 00007ffdaa5534b0 R14: 0000000000000000 R15: 00007ffda= a553500 [ 54.873429] XFS (loop0): xfs_do_force_shutdown(0x8) called from line 1= 024 of file fs/xfs/xfs_trans.c. Return address = ffffffff814cd050 [ 54.882790] XFS (loop0): Corruption of in-memory data detected. Shutt= ing down filesystem [ 54.884597] XFS (loop0): Please umount the filesystem and rectify the = problem(s) Note that this crash is only possible on v4 filesystemsi or v5 filesystems mounted with the ikeep mount option. For all other V5 filesystems, this problem cannot occur because we don't read inodes we are allocating from disk - we simply overwrite them with the new inode information. Signed-Off-By: Dave Chinner <dchinner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Tested-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-03-24 01:22:53 +08:00
/*
* If we are allocating a new inode, then check what was returned is
* actually a free, empty inode. If we are not allocating an inode,
* the check we didn't find a free inode.
*/
if (flags & XFS_IGET_CREATE) {
if (VFS_I(ip)->i_mode != 0) {
xfs_warn(mp,
"Corruption detected! Free inode 0x%llx not marked free on disk",
ino);
error = -EFSCORRUPTED;
goto out_destroy;
}
if (ip->i_d.di_nblocks != 0) {
xfs_warn(mp,
"Corruption detected! Free inode 0x%llx has blocks allocated!",
ino);
error = -EFSCORRUPTED;
goto out_destroy;
}
} else if (VFS_I(ip)->i_mode == 0) {
error = -ENOENT;
goto out_destroy;
}
/*
* Preload the radix tree so we can insert safely under the
* write spinlock. Note that we cannot sleep inside the preload
* region. Since we can be called from transaction context, don't
* recurse into the file system.
*/
if (radix_tree_preload(GFP_NOFS)) {
error = -EAGAIN;
goto out_destroy;
}
/*
* Because the inode hasn't been added to the radix-tree yet it can't
* be found by another thread, so we can do the non-sleeping lock here.
*/
if (lock_flags) {
if (!xfs_ilock_nowait(ip, lock_flags))
BUG();
}
/*
* These values must be set before inserting the inode into the radix
* tree as the moment it is inserted a concurrent lookup (allowed by the
* RCU locking mechanism) can find it and that lookup must see that this
* is an inode currently under construction (i.e. that XFS_INEW is set).
* The ip->i_flags_lock that protects the XFS_INEW flag forms the
* memory barrier that ensures this detection works correctly at lookup
* time.
*/
iflags = XFS_INEW;
if (flags & XFS_IGET_DONTCACHE)
iflags |= XFS_IDONTCACHE;
ip->i_udquot = NULL;
ip->i_gdquot = NULL;
ip->i_pdquot = NULL;
xfs_iflags_set(ip, iflags);
/* insert the new inode */
spin_lock(&pag->pag_ici_lock);
error = radix_tree_insert(&pag->pag_ici_root, agino, ip);
if (unlikely(error)) {
WARN_ON(error != -EEXIST);
XFS_STATS_INC(mp, xs_ig_dup);
error = -EAGAIN;
goto out_preload_end;
}
spin_unlock(&pag->pag_ici_lock);
radix_tree_preload_end();
*ipp = ip;
return 0;
out_preload_end:
spin_unlock(&pag->pag_ici_lock);
radix_tree_preload_end();
if (lock_flags)
xfs_iunlock(ip, lock_flags);
out_destroy:
__destroy_inode(VFS_I(ip));
xfs_inode_free(ip);
return error;
}
/*
* Look up an inode by number in the given file system.
* The inode is looked up in the cache held in each AG.
* If the inode is found in the cache, initialise the vfs inode
* if necessary.
*
* If it is not in core, read it in from the file system's device,
* add it to the cache and initialise the vfs inode.
*
* The inode is locked according to the value of the lock_flags parameter.
* This flag parameter indicates how and if the inode's IO lock and inode lock
* should be taken.
*
* mp -- the mount point structure for the current file system. It points
* to the inode hash table.
* tp -- a pointer to the current transaction if there is one. This is
* simply passed through to the xfs_iread() call.
* ino -- the number of the inode desired. This is the unique identifier
* within the file system for the inode being requested.
* lock_flags -- flags indicating how to lock the inode. See the comment
* for xfs_ilock() for a list of valid values.
*/
int
xfs_iget(
xfs_mount_t *mp,
xfs_trans_t *tp,
xfs_ino_t ino,
uint flags,
uint lock_flags,
xfs_inode_t **ipp)
{
xfs_inode_t *ip;
int error;
xfs_perag_t *pag;
xfs_agino_t agino;
/*
* xfs_reclaim_inode() uses the ILOCK to ensure an inode
* doesn't get freed while it's being referenced during a
* radix tree traversal here. It assumes this function
* aqcuires only the ILOCK (and therefore it has no need to
* involve the IOLOCK in this synchronization).
*/
ASSERT((lock_flags & (XFS_IOLOCK_EXCL | XFS_IOLOCK_SHARED)) == 0);
/* reject inode numbers outside existing AGs */
if (!ino || XFS_INO_TO_AGNO(mp, ino) >= mp->m_sb.sb_agcount)
return -EINVAL;
XFS_STATS_INC(mp, xs_ig_attempts);
/* get the perag structure and ensure that it's inode capable */
pag = xfs_perag_get(mp, XFS_INO_TO_AGNO(mp, ino));
agino = XFS_INO_TO_AGINO(mp, ino);
again:
error = 0;
rcu_read_lock();
ip = radix_tree_lookup(&pag->pag_ici_root, agino);
if (ip) {
error = xfs_iget_cache_hit(pag, ip, ino, flags, lock_flags);
if (error)
goto out_error_or_again;
} else {
rcu_read_unlock();
if (flags & XFS_IGET_INCORE) {
error = -ENODATA;
goto out_error_or_again;
}
XFS_STATS_INC(mp, xs_ig_missed);
error = xfs_iget_cache_miss(mp, pag, tp, ino, &ip,
flags, lock_flags);
if (error)
goto out_error_or_again;
}
xfs_perag_put(pag);
*ipp = ip;
/*
xfs: inodes are new until the dentry cache is set up Al Viro noticed a generic set of issues to do with filehandle lookup racing with dentry cache setup. They involve a filehandle lookup occurring while an inode is being created and the filehandle lookup racing with the dentry creation for the real file. This can lead to multiple dentries for the one path being instantiated. There are a host of other issues around this same set of paths. The underlying cause is that file handle lookup only waits on inode cache instantiation rather than full dentry cache instantiation. XFS is mostly immune to the problems discovered due to it's own internal inode cache, but there are a couple of corner cases where races can happen. We currently clear the XFS_INEW flag when the inode is fully set up after insertion into the cache. Newly allocated inodes are inserted locked and so aren't usable until the allocation transaction commits. This, however, occurs before the dentry and security information is fully initialised and hence the inode is unlocked and available for lookups to find too early. To solve the problem, only clear the XFS_INEW flag for newly created inodes once the dentry is fully instantiated. This means lookups will retry until the XFS_INEW flag is removed from the inode and hence avoids the race conditions in questions. THis also means that xfs_create(), xfs_create_tmpfile() and xfs_symlink() need to finish the setup of the inode in their error paths if we had allocated the inode but failed later in the creation process. xfs_symlink(), in particular, needed a lot of help to make it's error handling match that of xfs_create(). Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-23 19:38:08 +08:00
* If we have a real type for an on-disk inode, we can setup the inode
* now. If it's a new inode being created, xfs_ialloc will handle it.
*/
if (xfs_iflags_test(ip, XFS_INEW) && VFS_I(ip)->i_mode != 0)
xfs: inodes are new until the dentry cache is set up Al Viro noticed a generic set of issues to do with filehandle lookup racing with dentry cache setup. They involve a filehandle lookup occurring while an inode is being created and the filehandle lookup racing with the dentry creation for the real file. This can lead to multiple dentries for the one path being instantiated. There are a host of other issues around this same set of paths. The underlying cause is that file handle lookup only waits on inode cache instantiation rather than full dentry cache instantiation. XFS is mostly immune to the problems discovered due to it's own internal inode cache, but there are a couple of corner cases where races can happen. We currently clear the XFS_INEW flag when the inode is fully set up after insertion into the cache. Newly allocated inodes are inserted locked and so aren't usable until the allocation transaction commits. This, however, occurs before the dentry and security information is fully initialised and hence the inode is unlocked and available for lookups to find too early. To solve the problem, only clear the XFS_INEW flag for newly created inodes once the dentry is fully instantiated. This means lookups will retry until the XFS_INEW flag is removed from the inode and hence avoids the race conditions in questions. THis also means that xfs_create(), xfs_create_tmpfile() and xfs_symlink() need to finish the setup of the inode in their error paths if we had allocated the inode but failed later in the creation process. xfs_symlink(), in particular, needed a lot of help to make it's error handling match that of xfs_create(). Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-23 19:38:08 +08:00
xfs_setup_existing_inode(ip);
return 0;
out_error_or_again:
if (!(flags & XFS_IGET_INCORE) && error == -EAGAIN) {
delay(1);
goto again;
}
xfs_perag_put(pag);
return error;
}
/*
* "Is this a cached inode that's also allocated?"
*
* Look up an inode by number in the given file system. If the inode is
* in cache and isn't in purgatory, return 1 if the inode is allocated
* and 0 if it is not. For all other cases (not in cache, being torn
* down, etc.), return a negative error code.
*
* The caller has to prevent inode allocation and freeing activity,
* presumably by locking the AGI buffer. This is to ensure that an
* inode cannot transition from allocated to freed until the caller is
* ready to allow that. If the inode is in an intermediate state (new,
* reclaimable, or being reclaimed), -EAGAIN will be returned; if the
* inode is not in the cache, -ENOENT will be returned. The caller must
* deal with these scenarios appropriately.
*
* This is a specialized use case for the online scrubber; if you're
* reading this, you probably want xfs_iget.
*/
int
xfs_icache_inode_is_allocated(
struct xfs_mount *mp,
struct xfs_trans *tp,
xfs_ino_t ino,
bool *inuse)
{
struct xfs_inode *ip;
int error;
error = xfs_iget(mp, tp, ino, XFS_IGET_INCORE, 0, &ip);
if (error)
return error;
*inuse = !!(VFS_I(ip)->i_mode);
IRELE(ip);
return 0;
}
/*
* The inode lookup is done in batches to keep the amount of lock traffic and
* radix tree lookups to a minimum. The batch size is a trade off between
* lookup reduction and stack usage. This is in the reclaim path, so we can't
* be too greedy.
*/
#define XFS_LOOKUP_BATCH 32
STATIC int
xfs_inode_ag_walk_grab(
struct xfs_inode *ip,
int flags)
{
struct inode *inode = VFS_I(ip);
bool newinos = !!(flags & XFS_AGITER_INEW_WAIT);
ASSERT(rcu_read_lock_held());
/*
* check for stale RCU freed inode
*
* If the inode has been reallocated, it doesn't matter if it's not in
* the AG we are walking - we are walking for writeback, so if it
* passes all the "valid inode" checks and is dirty, then we'll write
* it back anyway. If it has been reallocated and still being
* initialised, the XFS_INEW check below will catch it.
*/
spin_lock(&ip->i_flags_lock);
if (!ip->i_ino)
goto out_unlock_noent;
/* avoid new or reclaimable inodes. Leave for reclaim code to flush */
if ((!newinos && __xfs_iflags_test(ip, XFS_INEW)) ||
__xfs_iflags_test(ip, XFS_IRECLAIMABLE | XFS_IRECLAIM))
goto out_unlock_noent;
spin_unlock(&ip->i_flags_lock);
/* nothing to sync during shutdown */
if (XFS_FORCED_SHUTDOWN(ip->i_mount))
return -EFSCORRUPTED;
/* If we can't grab the inode, it must on it's way to reclaim. */
if (!igrab(inode))
return -ENOENT;
/* inode is valid */
return 0;
out_unlock_noent:
spin_unlock(&ip->i_flags_lock);
return -ENOENT;
}
STATIC int
xfs_inode_ag_walk(
struct xfs_mount *mp,
struct xfs_perag *pag,
int (*execute)(struct xfs_inode *ip, int flags,
void *args),
int flags,
void *args,
int tag,
int iter_flags)
{
uint32_t first_index;
int last_error = 0;
int skipped;
int done;
int nr_found;
restart:
done = 0;
skipped = 0;
first_index = 0;
nr_found = 0;
do {
struct xfs_inode *batch[XFS_LOOKUP_BATCH];
int error = 0;
int i;
rcu_read_lock();
if (tag == -1)
nr_found = radix_tree_gang_lookup(&pag->pag_ici_root,
(void **)batch, first_index,
XFS_LOOKUP_BATCH);
else
nr_found = radix_tree_gang_lookup_tag(
&pag->pag_ici_root,
(void **) batch, first_index,
XFS_LOOKUP_BATCH, tag);
if (!nr_found) {
rcu_read_unlock();
break;
}
/*
* Grab the inodes before we drop the lock. if we found
* nothing, nr == 0 and the loop will be skipped.
*/
for (i = 0; i < nr_found; i++) {
struct xfs_inode *ip = batch[i];
if (done || xfs_inode_ag_walk_grab(ip, iter_flags))
batch[i] = NULL;
/*
* Update the index for the next lookup. Catch
* overflows into the next AG range which can occur if
* we have inodes in the last block of the AG and we
* are currently pointing to the last inode.
*
* Because we may see inodes that are from the wrong AG
* due to RCU freeing and reallocation, only update the
* index if it lies in this AG. It was a race that lead
* us to see this inode, so another lookup from the
* same index will not find it again.
*/
if (XFS_INO_TO_AGNO(mp, ip->i_ino) != pag->pag_agno)
continue;
first_index = XFS_INO_TO_AGINO(mp, ip->i_ino + 1);
if (first_index < XFS_INO_TO_AGINO(mp, ip->i_ino))
done = 1;
}
/* unlock now we've grabbed the inodes. */
rcu_read_unlock();
for (i = 0; i < nr_found; i++) {
if (!batch[i])
continue;
if ((iter_flags & XFS_AGITER_INEW_WAIT) &&
xfs_iflags_test(batch[i], XFS_INEW))
xfs_inew_wait(batch[i]);
error = execute(batch[i], flags, args);
IRELE(batch[i]);
if (error == -EAGAIN) {
skipped++;
continue;
}
if (error && last_error != -EFSCORRUPTED)
last_error = error;
}
/* bail out if the filesystem is corrupted. */
if (error == -EFSCORRUPTED)
break;
cond_resched();
} while (nr_found && !done);
if (skipped) {
delay(1);
goto restart;
}
return last_error;
}
/*
* Background scanning to trim post-EOF preallocated space. This is queued
* based on the 'speculative_prealloc_lifetime' tunable (5m by default).
*/
xfs: cancel eofblocks background trimming on remount read-only The filesystem quiesce sequence performs the operations necessary to drain all background work, push pending transactions through the log infrastructure and wait on I/O resulting from the final AIL push. We have had reports of remount,ro hangs in xfs_log_quiesce() -> xfs_wait_buftarg(), however, and some instrumentation code to detect transaction commits at this point in the quiesce sequence has inculpated the eofblocks background scanner as a cause. While higher level remount code generally prevents user modifications by the time the filesystem has made it to xfs_log_quiesce(), the background scanner may still be alive and can perform pending work at any time. If this occurs between the xfs_log_force() and xfs_wait_buftarg() calls within xfs_log_quiesce(), this can lead to an indefinite lockup in xfs_wait_buftarg(). To prevent this problem, cancel the background eofblocks scan worker during the remount read-only quiesce sequence. This suspends background trimming when a filesystem is remounted read-only. This is only done in the remount path because the freeze codepath has already locked out new transactions by the time the filesystem attempts to quiesce (and thus waiting on an active work item could deadlock). Kick the eofblocks worker to pick up where it left off once an fs is remounted back to read-write. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-06-21 09:53:28 +08:00
void
xfs_queue_eofblocks(
struct xfs_mount *mp)
{
rcu_read_lock();
if (radix_tree_tagged(&mp->m_perag_tree, XFS_ICI_EOFBLOCKS_TAG))
queue_delayed_work(mp->m_eofblocks_workqueue,
&mp->m_eofblocks_work,
msecs_to_jiffies(xfs_eofb_secs * 1000));
rcu_read_unlock();
}
void
xfs_eofblocks_worker(
struct work_struct *work)
{
struct xfs_mount *mp = container_of(to_delayed_work(work),
struct xfs_mount, m_eofblocks_work);
xfs_icache_free_eofblocks(mp, NULL);
xfs_queue_eofblocks(mp);
}
/*
* Background scanning to trim preallocated CoW space. This is queued
* based on the 'speculative_cow_prealloc_lifetime' tunable (5m by default).
* (We'll just piggyback on the post-EOF prealloc space workqueue.)
*/
void
xfs_queue_cowblocks(
struct xfs_mount *mp)
{
rcu_read_lock();
if (radix_tree_tagged(&mp->m_perag_tree, XFS_ICI_COWBLOCKS_TAG))
queue_delayed_work(mp->m_eofblocks_workqueue,
&mp->m_cowblocks_work,
msecs_to_jiffies(xfs_cowb_secs * 1000));
rcu_read_unlock();
}
void
xfs_cowblocks_worker(
struct work_struct *work)
{
struct xfs_mount *mp = container_of(to_delayed_work(work),
struct xfs_mount, m_cowblocks_work);
xfs_icache_free_cowblocks(mp, NULL);
xfs_queue_cowblocks(mp);
}
int
xfs_inode_ag_iterator_flags(
struct xfs_mount *mp,
int (*execute)(struct xfs_inode *ip, int flags,
void *args),
int flags,
void *args,
int iter_flags)
{
struct xfs_perag *pag;
int error = 0;
int last_error = 0;
xfs_agnumber_t ag;
ag = 0;
while ((pag = xfs_perag_get(mp, ag))) {
ag = pag->pag_agno + 1;
error = xfs_inode_ag_walk(mp, pag, execute, flags, args, -1,
iter_flags);
xfs_perag_put(pag);
if (error) {
last_error = error;
if (error == -EFSCORRUPTED)
break;
}
}
return last_error;
}
int
xfs_inode_ag_iterator(
struct xfs_mount *mp,
int (*execute)(struct xfs_inode *ip, int flags,
void *args),
int flags,
void *args)
{
return xfs_inode_ag_iterator_flags(mp, execute, flags, args, 0);
}
int
xfs_inode_ag_iterator_tag(
struct xfs_mount *mp,
int (*execute)(struct xfs_inode *ip, int flags,
void *args),
int flags,
void *args,
int tag)
{
struct xfs_perag *pag;
int error = 0;
int last_error = 0;
xfs_agnumber_t ag;
ag = 0;
while ((pag = xfs_perag_get_tag(mp, ag, tag))) {
ag = pag->pag_agno + 1;
error = xfs_inode_ag_walk(mp, pag, execute, flags, args, tag,
0);
xfs_perag_put(pag);
if (error) {
last_error = error;
if (error == -EFSCORRUPTED)
break;
}
}
return last_error;
}
/*
* Grab the inode for reclaim exclusively.
* Return 0 if we grabbed it, non-zero otherwise.
*/
STATIC int
xfs_reclaim_inode_grab(
struct xfs_inode *ip,
int flags)
{
ASSERT(rcu_read_lock_held());
/* quick check for stale RCU freed inode */
if (!ip->i_ino)
return 1;
/*
* If we are asked for non-blocking operation, do unlocked checks to
* see if the inode already is being flushed or in reclaim to avoid
* lock traffic.
*/
if ((flags & SYNC_TRYLOCK) &&
__xfs_iflags_test(ip, XFS_IFLOCK | XFS_IRECLAIM))
return 1;
/*
* The radix tree lock here protects a thread in xfs_iget from racing
* with us starting reclaim on the inode. Once we have the
* XFS_IRECLAIM flag set it will not touch us.
*
* Due to RCU lookup, we may find inodes that have been freed and only
* have XFS_IRECLAIM set. Indeed, we may see reallocated inodes that
* aren't candidates for reclaim at all, so we must check the
* XFS_IRECLAIMABLE is set first before proceeding to reclaim.
*/
spin_lock(&ip->i_flags_lock);
if (!__xfs_iflags_test(ip, XFS_IRECLAIMABLE) ||
__xfs_iflags_test(ip, XFS_IRECLAIM)) {
/* not a reclaim candidate. */
spin_unlock(&ip->i_flags_lock);
return 1;
}
__xfs_iflags_set(ip, XFS_IRECLAIM);
spin_unlock(&ip->i_flags_lock);
return 0;
}
/*
* Inodes in different states need to be treated differently. The following
* table lists the inode states and the reclaim actions necessary:
*
* inode state iflush ret required action
* --------------- ---------- ---------------
* bad - reclaim
* shutdown EIO unpin and reclaim
* clean, unpinned 0 reclaim
* stale, unpinned 0 reclaim
xfs: Use delayed write for inodes rather than async V2 We currently do background inode flush asynchronously, resulting in inodes being written in whatever order the background writeback issues them. Not only that, there are also blocking and non-blocking asynchronous inode flushes, depending on where the flush comes from. This patch completely removes asynchronous inode writeback. It removes all the strange writeback modes and replaces them with either a synchronous flush or a non-blocking delayed write flush. That is, inode flushes will only issue IO directly if they are synchronous, and background flushing may do nothing if the operation would block (e.g. on a pinned inode or buffer lock). Delayed write flushes will now result in the inode buffer sitting in the delwri queue of the buffer cache to be flushed by either an AIL push or by the xfsbufd timing out the buffer. This will allow accumulation of dirty inode buffers in memory and allow optimisation of inode cluster writeback at the xfsbufd level where we have much greater queue depths than the block layer elevators. We will also get adjacent inode cluster buffer IO merging for free when a later patch in the series allows sorting of the delayed write buffers before dispatch. This effectively means that any inode that is written back by background writeback will be seen as flush locked during AIL pushing, and will result in the buffers being pushed from there. This writeback path is currently non-optimal, but the next patch in the series will fix that problem. A side effect of this delayed write mechanism is that background inode reclaim will no longer directly flush inodes, nor can it wait on the flush lock. The result is that inode reclaim must leave the inode in the reclaimable state until it is clean. Hence attempts to reclaim a dirty inode in the background will simply skip the inode until it is clean and this allows other mechanisms (i.e. xfsbufd) to do more optimal writeback of the dirty buffers. As a result, the inode reclaim code has been rewritten so that it no longer relies on the ambiguous return values of xfs_iflush() to determine whether it is safe to reclaim an inode. Portions of this patch are derived from patches by Christoph Hellwig. Version 2: - cleanup reclaim code as suggested by Christoph - log background reclaim inode flush errors - just pass sync flags to xfs_iflush Signed-off-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-02-06 09:39:36 +08:00
* clean, pinned(*) 0 requeue
* stale, pinned EAGAIN requeue
* dirty, async - requeue
* dirty, sync 0 reclaim
*
* (*) dgc: I don't think the clean, pinned state is possible but it gets
* handled anyway given the order of checks implemented.
*
xfs: Use delayed write for inodes rather than async V2 We currently do background inode flush asynchronously, resulting in inodes being written in whatever order the background writeback issues them. Not only that, there are also blocking and non-blocking asynchronous inode flushes, depending on where the flush comes from. This patch completely removes asynchronous inode writeback. It removes all the strange writeback modes and replaces them with either a synchronous flush or a non-blocking delayed write flush. That is, inode flushes will only issue IO directly if they are synchronous, and background flushing may do nothing if the operation would block (e.g. on a pinned inode or buffer lock). Delayed write flushes will now result in the inode buffer sitting in the delwri queue of the buffer cache to be flushed by either an AIL push or by the xfsbufd timing out the buffer. This will allow accumulation of dirty inode buffers in memory and allow optimisation of inode cluster writeback at the xfsbufd level where we have much greater queue depths than the block layer elevators. We will also get adjacent inode cluster buffer IO merging for free when a later patch in the series allows sorting of the delayed write buffers before dispatch. This effectively means that any inode that is written back by background writeback will be seen as flush locked during AIL pushing, and will result in the buffers being pushed from there. This writeback path is currently non-optimal, but the next patch in the series will fix that problem. A side effect of this delayed write mechanism is that background inode reclaim will no longer directly flush inodes, nor can it wait on the flush lock. The result is that inode reclaim must leave the inode in the reclaimable state until it is clean. Hence attempts to reclaim a dirty inode in the background will simply skip the inode until it is clean and this allows other mechanisms (i.e. xfsbufd) to do more optimal writeback of the dirty buffers. As a result, the inode reclaim code has been rewritten so that it no longer relies on the ambiguous return values of xfs_iflush() to determine whether it is safe to reclaim an inode. Portions of this patch are derived from patches by Christoph Hellwig. Version 2: - cleanup reclaim code as suggested by Christoph - log background reclaim inode flush errors - just pass sync flags to xfs_iflush Signed-off-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-02-06 09:39:36 +08:00
* Also, because we get the flush lock first, we know that any inode that has
* been flushed delwri has had the flush completed by the time we check that
* the inode is clean.
xfs: Use delayed write for inodes rather than async V2 We currently do background inode flush asynchronously, resulting in inodes being written in whatever order the background writeback issues them. Not only that, there are also blocking and non-blocking asynchronous inode flushes, depending on where the flush comes from. This patch completely removes asynchronous inode writeback. It removes all the strange writeback modes and replaces them with either a synchronous flush or a non-blocking delayed write flush. That is, inode flushes will only issue IO directly if they are synchronous, and background flushing may do nothing if the operation would block (e.g. on a pinned inode or buffer lock). Delayed write flushes will now result in the inode buffer sitting in the delwri queue of the buffer cache to be flushed by either an AIL push or by the xfsbufd timing out the buffer. This will allow accumulation of dirty inode buffers in memory and allow optimisation of inode cluster writeback at the xfsbufd level where we have much greater queue depths than the block layer elevators. We will also get adjacent inode cluster buffer IO merging for free when a later patch in the series allows sorting of the delayed write buffers before dispatch. This effectively means that any inode that is written back by background writeback will be seen as flush locked during AIL pushing, and will result in the buffers being pushed from there. This writeback path is currently non-optimal, but the next patch in the series will fix that problem. A side effect of this delayed write mechanism is that background inode reclaim will no longer directly flush inodes, nor can it wait on the flush lock. The result is that inode reclaim must leave the inode in the reclaimable state until it is clean. Hence attempts to reclaim a dirty inode in the background will simply skip the inode until it is clean and this allows other mechanisms (i.e. xfsbufd) to do more optimal writeback of the dirty buffers. As a result, the inode reclaim code has been rewritten so that it no longer relies on the ambiguous return values of xfs_iflush() to determine whether it is safe to reclaim an inode. Portions of this patch are derived from patches by Christoph Hellwig. Version 2: - cleanup reclaim code as suggested by Christoph - log background reclaim inode flush errors - just pass sync flags to xfs_iflush Signed-off-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-02-06 09:39:36 +08:00
*
* Note that because the inode is flushed delayed write by AIL pushing, the
* flush lock may already be held here and waiting on it can result in very
* long latencies. Hence for sync reclaims, where we wait on the flush lock,
* the caller should push the AIL first before trying to reclaim inodes to
* minimise the amount of time spent waiting. For background relaim, we only
* bother to reclaim clean inodes anyway.
xfs: Use delayed write for inodes rather than async V2 We currently do background inode flush asynchronously, resulting in inodes being written in whatever order the background writeback issues them. Not only that, there are also blocking and non-blocking asynchronous inode flushes, depending on where the flush comes from. This patch completely removes asynchronous inode writeback. It removes all the strange writeback modes and replaces them with either a synchronous flush or a non-blocking delayed write flush. That is, inode flushes will only issue IO directly if they are synchronous, and background flushing may do nothing if the operation would block (e.g. on a pinned inode or buffer lock). Delayed write flushes will now result in the inode buffer sitting in the delwri queue of the buffer cache to be flushed by either an AIL push or by the xfsbufd timing out the buffer. This will allow accumulation of dirty inode buffers in memory and allow optimisation of inode cluster writeback at the xfsbufd level where we have much greater queue depths than the block layer elevators. We will also get adjacent inode cluster buffer IO merging for free when a later patch in the series allows sorting of the delayed write buffers before dispatch. This effectively means that any inode that is written back by background writeback will be seen as flush locked during AIL pushing, and will result in the buffers being pushed from there. This writeback path is currently non-optimal, but the next patch in the series will fix that problem. A side effect of this delayed write mechanism is that background inode reclaim will no longer directly flush inodes, nor can it wait on the flush lock. The result is that inode reclaim must leave the inode in the reclaimable state until it is clean. Hence attempts to reclaim a dirty inode in the background will simply skip the inode until it is clean and this allows other mechanisms (i.e. xfsbufd) to do more optimal writeback of the dirty buffers. As a result, the inode reclaim code has been rewritten so that it no longer relies on the ambiguous return values of xfs_iflush() to determine whether it is safe to reclaim an inode. Portions of this patch are derived from patches by Christoph Hellwig. Version 2: - cleanup reclaim code as suggested by Christoph - log background reclaim inode flush errors - just pass sync flags to xfs_iflush Signed-off-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-02-06 09:39:36 +08:00
*
* Hence the order of actions after gaining the locks should be:
* bad => reclaim
* shutdown => unpin and reclaim
* pinned, async => requeue
xfs: Use delayed write for inodes rather than async V2 We currently do background inode flush asynchronously, resulting in inodes being written in whatever order the background writeback issues them. Not only that, there are also blocking and non-blocking asynchronous inode flushes, depending on where the flush comes from. This patch completely removes asynchronous inode writeback. It removes all the strange writeback modes and replaces them with either a synchronous flush or a non-blocking delayed write flush. That is, inode flushes will only issue IO directly if they are synchronous, and background flushing may do nothing if the operation would block (e.g. on a pinned inode or buffer lock). Delayed write flushes will now result in the inode buffer sitting in the delwri queue of the buffer cache to be flushed by either an AIL push or by the xfsbufd timing out the buffer. This will allow accumulation of dirty inode buffers in memory and allow optimisation of inode cluster writeback at the xfsbufd level where we have much greater queue depths than the block layer elevators. We will also get adjacent inode cluster buffer IO merging for free when a later patch in the series allows sorting of the delayed write buffers before dispatch. This effectively means that any inode that is written back by background writeback will be seen as flush locked during AIL pushing, and will result in the buffers being pushed from there. This writeback path is currently non-optimal, but the next patch in the series will fix that problem. A side effect of this delayed write mechanism is that background inode reclaim will no longer directly flush inodes, nor can it wait on the flush lock. The result is that inode reclaim must leave the inode in the reclaimable state until it is clean. Hence attempts to reclaim a dirty inode in the background will simply skip the inode until it is clean and this allows other mechanisms (i.e. xfsbufd) to do more optimal writeback of the dirty buffers. As a result, the inode reclaim code has been rewritten so that it no longer relies on the ambiguous return values of xfs_iflush() to determine whether it is safe to reclaim an inode. Portions of this patch are derived from patches by Christoph Hellwig. Version 2: - cleanup reclaim code as suggested by Christoph - log background reclaim inode flush errors - just pass sync flags to xfs_iflush Signed-off-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-02-06 09:39:36 +08:00
* pinned, sync => unpin
* stale => reclaim
* clean => reclaim
* dirty, async => requeue
xfs: Use delayed write for inodes rather than async V2 We currently do background inode flush asynchronously, resulting in inodes being written in whatever order the background writeback issues them. Not only that, there are also blocking and non-blocking asynchronous inode flushes, depending on where the flush comes from. This patch completely removes asynchronous inode writeback. It removes all the strange writeback modes and replaces them with either a synchronous flush or a non-blocking delayed write flush. That is, inode flushes will only issue IO directly if they are synchronous, and background flushing may do nothing if the operation would block (e.g. on a pinned inode or buffer lock). Delayed write flushes will now result in the inode buffer sitting in the delwri queue of the buffer cache to be flushed by either an AIL push or by the xfsbufd timing out the buffer. This will allow accumulation of dirty inode buffers in memory and allow optimisation of inode cluster writeback at the xfsbufd level where we have much greater queue depths than the block layer elevators. We will also get adjacent inode cluster buffer IO merging for free when a later patch in the series allows sorting of the delayed write buffers before dispatch. This effectively means that any inode that is written back by background writeback will be seen as flush locked during AIL pushing, and will result in the buffers being pushed from there. This writeback path is currently non-optimal, but the next patch in the series will fix that problem. A side effect of this delayed write mechanism is that background inode reclaim will no longer directly flush inodes, nor can it wait on the flush lock. The result is that inode reclaim must leave the inode in the reclaimable state until it is clean. Hence attempts to reclaim a dirty inode in the background will simply skip the inode until it is clean and this allows other mechanisms (i.e. xfsbufd) to do more optimal writeback of the dirty buffers. As a result, the inode reclaim code has been rewritten so that it no longer relies on the ambiguous return values of xfs_iflush() to determine whether it is safe to reclaim an inode. Portions of this patch are derived from patches by Christoph Hellwig. Version 2: - cleanup reclaim code as suggested by Christoph - log background reclaim inode flush errors - just pass sync flags to xfs_iflush Signed-off-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-02-06 09:39:36 +08:00
* dirty, sync => flush, wait and reclaim
*/
STATIC int
xfs_reclaim_inode(
struct xfs_inode *ip,
struct xfs_perag *pag,
int sync_mode)
{
struct xfs_buf *bp = NULL;
2016-05-18 12:09:12 +08:00
xfs_ino_t ino = ip->i_ino; /* for radix_tree_delete */
int error;
restart:
error = 0;
xfs_ilock(ip, XFS_ILOCK_EXCL);
xfs: Use delayed write for inodes rather than async V2 We currently do background inode flush asynchronously, resulting in inodes being written in whatever order the background writeback issues them. Not only that, there are also blocking and non-blocking asynchronous inode flushes, depending on where the flush comes from. This patch completely removes asynchronous inode writeback. It removes all the strange writeback modes and replaces them with either a synchronous flush or a non-blocking delayed write flush. That is, inode flushes will only issue IO directly if they are synchronous, and background flushing may do nothing if the operation would block (e.g. on a pinned inode or buffer lock). Delayed write flushes will now result in the inode buffer sitting in the delwri queue of the buffer cache to be flushed by either an AIL push or by the xfsbufd timing out the buffer. This will allow accumulation of dirty inode buffers in memory and allow optimisation of inode cluster writeback at the xfsbufd level where we have much greater queue depths than the block layer elevators. We will also get adjacent inode cluster buffer IO merging for free when a later patch in the series allows sorting of the delayed write buffers before dispatch. This effectively means that any inode that is written back by background writeback will be seen as flush locked during AIL pushing, and will result in the buffers being pushed from there. This writeback path is currently non-optimal, but the next patch in the series will fix that problem. A side effect of this delayed write mechanism is that background inode reclaim will no longer directly flush inodes, nor can it wait on the flush lock. The result is that inode reclaim must leave the inode in the reclaimable state until it is clean. Hence attempts to reclaim a dirty inode in the background will simply skip the inode until it is clean and this allows other mechanisms (i.e. xfsbufd) to do more optimal writeback of the dirty buffers. As a result, the inode reclaim code has been rewritten so that it no longer relies on the ambiguous return values of xfs_iflush() to determine whether it is safe to reclaim an inode. Portions of this patch are derived from patches by Christoph Hellwig. Version 2: - cleanup reclaim code as suggested by Christoph - log background reclaim inode flush errors - just pass sync flags to xfs_iflush Signed-off-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-02-06 09:39:36 +08:00
if (!xfs_iflock_nowait(ip)) {
if (!(sync_mode & SYNC_WAIT))
goto out;
xfs_iflock(ip);
}
if (XFS_FORCED_SHUTDOWN(ip->i_mount)) {
xfs_iunpin_wait(ip);
/* xfs_iflush_abort() drops the flush lock */
xfs_iflush_abort(ip, false);
goto reclaim;
}
xfs: Use delayed write for inodes rather than async V2 We currently do background inode flush asynchronously, resulting in inodes being written in whatever order the background writeback issues them. Not only that, there are also blocking and non-blocking asynchronous inode flushes, depending on where the flush comes from. This patch completely removes asynchronous inode writeback. It removes all the strange writeback modes and replaces them with either a synchronous flush or a non-blocking delayed write flush. That is, inode flushes will only issue IO directly if they are synchronous, and background flushing may do nothing if the operation would block (e.g. on a pinned inode or buffer lock). Delayed write flushes will now result in the inode buffer sitting in the delwri queue of the buffer cache to be flushed by either an AIL push or by the xfsbufd timing out the buffer. This will allow accumulation of dirty inode buffers in memory and allow optimisation of inode cluster writeback at the xfsbufd level where we have much greater queue depths than the block layer elevators. We will also get adjacent inode cluster buffer IO merging for free when a later patch in the series allows sorting of the delayed write buffers before dispatch. This effectively means that any inode that is written back by background writeback will be seen as flush locked during AIL pushing, and will result in the buffers being pushed from there. This writeback path is currently non-optimal, but the next patch in the series will fix that problem. A side effect of this delayed write mechanism is that background inode reclaim will no longer directly flush inodes, nor can it wait on the flush lock. The result is that inode reclaim must leave the inode in the reclaimable state until it is clean. Hence attempts to reclaim a dirty inode in the background will simply skip the inode until it is clean and this allows other mechanisms (i.e. xfsbufd) to do more optimal writeback of the dirty buffers. As a result, the inode reclaim code has been rewritten so that it no longer relies on the ambiguous return values of xfs_iflush() to determine whether it is safe to reclaim an inode. Portions of this patch are derived from patches by Christoph Hellwig. Version 2: - cleanup reclaim code as suggested by Christoph - log background reclaim inode flush errors - just pass sync flags to xfs_iflush Signed-off-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-02-06 09:39:36 +08:00
if (xfs_ipincount(ip)) {
if (!(sync_mode & SYNC_WAIT))
goto out_ifunlock;
xfs_iunpin_wait(ip);
xfs: Use delayed write for inodes rather than async V2 We currently do background inode flush asynchronously, resulting in inodes being written in whatever order the background writeback issues them. Not only that, there are also blocking and non-blocking asynchronous inode flushes, depending on where the flush comes from. This patch completely removes asynchronous inode writeback. It removes all the strange writeback modes and replaces them with either a synchronous flush or a non-blocking delayed write flush. That is, inode flushes will only issue IO directly if they are synchronous, and background flushing may do nothing if the operation would block (e.g. on a pinned inode or buffer lock). Delayed write flushes will now result in the inode buffer sitting in the delwri queue of the buffer cache to be flushed by either an AIL push or by the xfsbufd timing out the buffer. This will allow accumulation of dirty inode buffers in memory and allow optimisation of inode cluster writeback at the xfsbufd level where we have much greater queue depths than the block layer elevators. We will also get adjacent inode cluster buffer IO merging for free when a later patch in the series allows sorting of the delayed write buffers before dispatch. This effectively means that any inode that is written back by background writeback will be seen as flush locked during AIL pushing, and will result in the buffers being pushed from there. This writeback path is currently non-optimal, but the next patch in the series will fix that problem. A side effect of this delayed write mechanism is that background inode reclaim will no longer directly flush inodes, nor can it wait on the flush lock. The result is that inode reclaim must leave the inode in the reclaimable state until it is clean. Hence attempts to reclaim a dirty inode in the background will simply skip the inode until it is clean and this allows other mechanisms (i.e. xfsbufd) to do more optimal writeback of the dirty buffers. As a result, the inode reclaim code has been rewritten so that it no longer relies on the ambiguous return values of xfs_iflush() to determine whether it is safe to reclaim an inode. Portions of this patch are derived from patches by Christoph Hellwig. Version 2: - cleanup reclaim code as suggested by Christoph - log background reclaim inode flush errors - just pass sync flags to xfs_iflush Signed-off-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-02-06 09:39:36 +08:00
}
if (xfs_iflags_test(ip, XFS_ISTALE) || xfs_inode_clean(ip)) {
xfs_ifunlock(ip);
goto reclaim;
}
/*
* Never flush out dirty data during non-blocking reclaim, as it would
* just contend with AIL pushing trying to do the same job.
*/
if (!(sync_mode & SYNC_WAIT))
goto out_ifunlock;
/*
* Now we have an inode that needs flushing.
*
* Note that xfs_iflush will never block on the inode buffer lock, as
* xfs_ifree_cluster() can lock the inode buffer before it locks the
* ip->i_lock, and we are doing the exact opposite here. As a result,
* doing a blocking xfs_imap_to_bp() to get the cluster buffer would
* result in an ABBA deadlock with xfs_ifree_cluster().
*
* As xfs_ifree_cluser() must gather all inodes that are active in the
* cache to mark them stale, if we hit this case we don't actually want
* to do IO here - we want the inode marked stale so we can simply
* reclaim it. Hence if we get an EAGAIN error here, just unlock the
* inode, back off and try again. Hopefully the next pass through will
* see the stale flag set on the inode.
*/
error = xfs_iflush(ip, &bp);
if (error == -EAGAIN) {
xfs_iunlock(ip, XFS_ILOCK_EXCL);
/* backoff longer than in xfs_ifree_cluster */
delay(2);
goto restart;
xfs: Use delayed write for inodes rather than async V2 We currently do background inode flush asynchronously, resulting in inodes being written in whatever order the background writeback issues them. Not only that, there are also blocking and non-blocking asynchronous inode flushes, depending on where the flush comes from. This patch completely removes asynchronous inode writeback. It removes all the strange writeback modes and replaces them with either a synchronous flush or a non-blocking delayed write flush. That is, inode flushes will only issue IO directly if they are synchronous, and background flushing may do nothing if the operation would block (e.g. on a pinned inode or buffer lock). Delayed write flushes will now result in the inode buffer sitting in the delwri queue of the buffer cache to be flushed by either an AIL push or by the xfsbufd timing out the buffer. This will allow accumulation of dirty inode buffers in memory and allow optimisation of inode cluster writeback at the xfsbufd level where we have much greater queue depths than the block layer elevators. We will also get adjacent inode cluster buffer IO merging for free when a later patch in the series allows sorting of the delayed write buffers before dispatch. This effectively means that any inode that is written back by background writeback will be seen as flush locked during AIL pushing, and will result in the buffers being pushed from there. This writeback path is currently non-optimal, but the next patch in the series will fix that problem. A side effect of this delayed write mechanism is that background inode reclaim will no longer directly flush inodes, nor can it wait on the flush lock. The result is that inode reclaim must leave the inode in the reclaimable state until it is clean. Hence attempts to reclaim a dirty inode in the background will simply skip the inode until it is clean and this allows other mechanisms (i.e. xfsbufd) to do more optimal writeback of the dirty buffers. As a result, the inode reclaim code has been rewritten so that it no longer relies on the ambiguous return values of xfs_iflush() to determine whether it is safe to reclaim an inode. Portions of this patch are derived from patches by Christoph Hellwig. Version 2: - cleanup reclaim code as suggested by Christoph - log background reclaim inode flush errors - just pass sync flags to xfs_iflush Signed-off-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-02-06 09:39:36 +08:00
}
if (!error) {
error = xfs_bwrite(bp);
xfs_buf_relse(bp);
}
reclaim:
ASSERT(!xfs_isiflocked(ip));
2016-05-18 12:09:12 +08:00
/*
* Because we use RCU freeing we need to ensure the inode always appears
* to be reclaimed with an invalid inode number when in the free state.
* We do this as early as possible under the ILOCK so that
* xfs_iflush_cluster() and xfs_ifree_cluster() can be guaranteed to
* detect races with us here. By doing this, we guarantee that once
* xfs_iflush_cluster() or xfs_ifree_cluster() has locked XFS_ILOCK that
* it will see either a valid inode that will serialise correctly, or it
* will see an invalid inode that it can skip.
2016-05-18 12:09:12 +08:00
*/
spin_lock(&ip->i_flags_lock);
ip->i_flags = XFS_IRECLAIM;
ip->i_ino = 0;
spin_unlock(&ip->i_flags_lock);
xfs_iunlock(ip, XFS_ILOCK_EXCL);
XFS_STATS_INC(ip->i_mount, xs_ig_reclaims);
/*
* Remove the inode from the per-AG radix tree.
*
* Because radix_tree_delete won't complain even if the item was never
* added to the tree assert that it's been there before to catch
* problems with the inode life time early on.
*/
spin_lock(&pag->pag_ici_lock);
if (!radix_tree_delete(&pag->pag_ici_root,
2016-05-18 12:09:12 +08:00
XFS_INO_TO_AGINO(ip->i_mount, ino)))
ASSERT(0);
xfs_perag_clear_reclaim_tag(pag);
spin_unlock(&pag->pag_ici_lock);
/*
* Here we do an (almost) spurious inode lock in order to coordinate
* with inode cache radix tree lookups. This is because the lookup
* can reference the inodes in the cache without taking references.
*
* We make that OK here by ensuring that we wait until the inode is
* unlocked after the lookup before we go ahead and free it.
*/
xfs_ilock(ip, XFS_ILOCK_EXCL);
xfs_qm_dqdetach(ip);
xfs_iunlock(ip, XFS_ILOCK_EXCL);
2016-05-18 12:09:12 +08:00
__xfs_inode_free(ip);
return error;
out_ifunlock:
xfs_ifunlock(ip);
out:
xfs_iflags_clear(ip, XFS_IRECLAIM);
xfs_iunlock(ip, XFS_ILOCK_EXCL);
/*
* We could return -EAGAIN here to make reclaim rescan the inode tree in
* a short while. However, this just burns CPU time scanning the tree
* waiting for IO to complete and the reclaim work never goes back to
* the idle state. Instead, return 0 to let the next scheduled
* background reclaim attempt to reclaim the inode again.
*/
return 0;
}
/*
* Walk the AGs and reclaim the inodes in them. Even if the filesystem is
* corrupted, we still want to try to reclaim all the inodes. If we don't,
* then a shut down during filesystem unmount reclaim walk leak all the
* unreclaimed inodes.
*/
STATIC int
xfs_reclaim_inodes_ag(
struct xfs_mount *mp,
int flags,
int *nr_to_scan)
{
struct xfs_perag *pag;
int error = 0;
int last_error = 0;
xfs_agnumber_t ag;
int trylock = flags & SYNC_TRYLOCK;
int skipped;
restart:
ag = 0;
skipped = 0;
while ((pag = xfs_perag_get_tag(mp, ag, XFS_ICI_RECLAIM_TAG))) {
unsigned long first_index = 0;
int done = 0;
int nr_found = 0;
ag = pag->pag_agno + 1;
if (trylock) {
if (!mutex_trylock(&pag->pag_ici_reclaim_lock)) {
skipped++;
xfs_perag_put(pag);
continue;
}
first_index = pag->pag_ici_reclaim_cursor;
} else
mutex_lock(&pag->pag_ici_reclaim_lock);
do {
struct xfs_inode *batch[XFS_LOOKUP_BATCH];
int i;
rcu_read_lock();
nr_found = radix_tree_gang_lookup_tag(
&pag->pag_ici_root,
(void **)batch, first_index,
XFS_LOOKUP_BATCH,
XFS_ICI_RECLAIM_TAG);
if (!nr_found) {
done = 1;
rcu_read_unlock();
break;
}
/*
* Grab the inodes before we drop the lock. if we found
* nothing, nr == 0 and the loop will be skipped.
*/
for (i = 0; i < nr_found; i++) {
struct xfs_inode *ip = batch[i];
if (done || xfs_reclaim_inode_grab(ip, flags))
batch[i] = NULL;
/*
* Update the index for the next lookup. Catch
* overflows into the next AG range which can
* occur if we have inodes in the last block of
* the AG and we are currently pointing to the
* last inode.
*
* Because we may see inodes that are from the
* wrong AG due to RCU freeing and
* reallocation, only update the index if it
* lies in this AG. It was a race that lead us
* to see this inode, so another lookup from
* the same index will not find it again.
*/
if (XFS_INO_TO_AGNO(mp, ip->i_ino) !=
pag->pag_agno)
continue;
first_index = XFS_INO_TO_AGINO(mp, ip->i_ino + 1);
if (first_index < XFS_INO_TO_AGINO(mp, ip->i_ino))
done = 1;
}
/* unlock now we've grabbed the inodes. */
rcu_read_unlock();
for (i = 0; i < nr_found; i++) {
if (!batch[i])
continue;
error = xfs_reclaim_inode(batch[i], pag, flags);
if (error && last_error != -EFSCORRUPTED)
last_error = error;
}
*nr_to_scan -= XFS_LOOKUP_BATCH;
cond_resched();
} while (nr_found && !done && *nr_to_scan > 0);
if (trylock && !done)
pag->pag_ici_reclaim_cursor = first_index;
else
pag->pag_ici_reclaim_cursor = 0;
mutex_unlock(&pag->pag_ici_reclaim_lock);
xfs_perag_put(pag);
}
/*
* if we skipped any AG, and we still have scan count remaining, do
* another pass this time using blocking reclaim semantics (i.e
* waiting on the reclaim locks and ignoring the reclaim cursors). This
* ensure that when we get more reclaimers than AGs we block rather
* than spin trying to execute reclaim.
*/
if (skipped && (flags & SYNC_WAIT) && *nr_to_scan > 0) {
trylock = 0;
goto restart;
}
return last_error;
}
int
xfs_reclaim_inodes(
xfs_mount_t *mp,
int mode)
{
int nr_to_scan = INT_MAX;
return xfs_reclaim_inodes_ag(mp, mode, &nr_to_scan);
}
/*
* Scan a certain number of inodes for reclaim.
xfs: introduce background inode reclaim work Background inode reclaim needs to run more frequently that the XFS syncd work is run as 30s is too long between optimal reclaim runs. Add a new periodic work item to the xfs syncd workqueue to run a fast, non-blocking inode reclaim scan. Background inode reclaim is kicked by the act of marking inodes for reclaim. When an AG is first marked as having reclaimable inodes, the background reclaim work is kicked. It will continue to run periodically untill it detects that there are no more reclaimable inodes. It will be kicked again when the first inode is queued for reclaim. To ensure shrinker based inode reclaim throttles to the inode cleaning and reclaim rate but still reclaim inodes efficiently, make it kick the background inode reclaim so that when we are low on memory we are trying to reclaim inodes as efficiently as possible. This kick shoul d not be necessary, but it will protect against failures to kick the background reclaim when inodes are first dirtied. To provide the rate throttling, make the shrinker pass do synchronous inode reclaim so that it blocks on inodes under IO. This means that the shrinker will reclaim inodes rather than just skipping over them, but it does not adversely affect the rate of reclaim because most dirty inodes are already under IO due to the background reclaim work the shrinker kicked. These two modifications solve one of the two OOM killer invocations Chris Mason reported recently when running a stress testing script. The particular workload trigger for the OOM killer invocation is where there are more threads than CPUs all unlinking files in an extremely memory constrained environment. Unlike other solutions, this one does not have a performance impact on performance when memory is not constrained or the number of concurrent threads operating is <= to the number of CPUs. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com>
2011-04-08 10:45:07 +08:00
*
* When called we make sure that there is a background (fast) inode reclaim in
* progress, while we will throttle the speed of reclaim via doing synchronous
xfs: introduce background inode reclaim work Background inode reclaim needs to run more frequently that the XFS syncd work is run as 30s is too long between optimal reclaim runs. Add a new periodic work item to the xfs syncd workqueue to run a fast, non-blocking inode reclaim scan. Background inode reclaim is kicked by the act of marking inodes for reclaim. When an AG is first marked as having reclaimable inodes, the background reclaim work is kicked. It will continue to run periodically untill it detects that there are no more reclaimable inodes. It will be kicked again when the first inode is queued for reclaim. To ensure shrinker based inode reclaim throttles to the inode cleaning and reclaim rate but still reclaim inodes efficiently, make it kick the background inode reclaim so that when we are low on memory we are trying to reclaim inodes as efficiently as possible. This kick shoul d not be necessary, but it will protect against failures to kick the background reclaim when inodes are first dirtied. To provide the rate throttling, make the shrinker pass do synchronous inode reclaim so that it blocks on inodes under IO. This means that the shrinker will reclaim inodes rather than just skipping over them, but it does not adversely affect the rate of reclaim because most dirty inodes are already under IO due to the background reclaim work the shrinker kicked. These two modifications solve one of the two OOM killer invocations Chris Mason reported recently when running a stress testing script. The particular workload trigger for the OOM killer invocation is where there are more threads than CPUs all unlinking files in an extremely memory constrained environment. Unlike other solutions, this one does not have a performance impact on performance when memory is not constrained or the number of concurrent threads operating is <= to the number of CPUs. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com>
2011-04-08 10:45:07 +08:00
* reclaim of inodes. That means if we come across dirty inodes, we wait for
* them to be cleaned, which we hope will not be very long due to the
* background walker having already kicked the IO off on those dirty inodes.
*/
shrinker: convert superblock shrinkers to new API Convert superblock shrinker to use the new count/scan API, and propagate the API changes through to the filesystem callouts. The filesystem callouts already use a count/scan API, so it's just changing counters to longs to match the VM API. This requires the dentry and inode shrinker callouts to be converted to the count/scan API. This is mainly a mechanical change. [glommer@openvz.org: use mult_frac for fractional proportions, build fixes] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 08:17:57 +08:00
long
xfs_reclaim_inodes_nr(
struct xfs_mount *mp,
int nr_to_scan)
{
/* kick background reclaimer and push the AIL */
xfs_reclaim_work_queue(mp);
xfs_ail_push_all(mp->m_ail);
xfs: introduce background inode reclaim work Background inode reclaim needs to run more frequently that the XFS syncd work is run as 30s is too long between optimal reclaim runs. Add a new periodic work item to the xfs syncd workqueue to run a fast, non-blocking inode reclaim scan. Background inode reclaim is kicked by the act of marking inodes for reclaim. When an AG is first marked as having reclaimable inodes, the background reclaim work is kicked. It will continue to run periodically untill it detects that there are no more reclaimable inodes. It will be kicked again when the first inode is queued for reclaim. To ensure shrinker based inode reclaim throttles to the inode cleaning and reclaim rate but still reclaim inodes efficiently, make it kick the background inode reclaim so that when we are low on memory we are trying to reclaim inodes as efficiently as possible. This kick shoul d not be necessary, but it will protect against failures to kick the background reclaim when inodes are first dirtied. To provide the rate throttling, make the shrinker pass do synchronous inode reclaim so that it blocks on inodes under IO. This means that the shrinker will reclaim inodes rather than just skipping over them, but it does not adversely affect the rate of reclaim because most dirty inodes are already under IO due to the background reclaim work the shrinker kicked. These two modifications solve one of the two OOM killer invocations Chris Mason reported recently when running a stress testing script. The particular workload trigger for the OOM killer invocation is where there are more threads than CPUs all unlinking files in an extremely memory constrained environment. Unlike other solutions, this one does not have a performance impact on performance when memory is not constrained or the number of concurrent threads operating is <= to the number of CPUs. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com>
2011-04-08 10:45:07 +08:00
shrinker: convert superblock shrinkers to new API Convert superblock shrinker to use the new count/scan API, and propagate the API changes through to the filesystem callouts. The filesystem callouts already use a count/scan API, so it's just changing counters to longs to match the VM API. This requires the dentry and inode shrinker callouts to be converted to the count/scan API. This is mainly a mechanical change. [glommer@openvz.org: use mult_frac for fractional proportions, build fixes] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 08:17:57 +08:00
return xfs_reclaim_inodes_ag(mp, SYNC_TRYLOCK | SYNC_WAIT, &nr_to_scan);
}
/*
* Return the number of reclaimable inodes in the filesystem for
* the shrinker to determine how much to reclaim.
*/
int
xfs_reclaim_inodes_count(
struct xfs_mount *mp)
{
struct xfs_perag *pag;
xfs_agnumber_t ag = 0;
int reclaimable = 0;
while ((pag = xfs_perag_get_tag(mp, ag, XFS_ICI_RECLAIM_TAG))) {
ag = pag->pag_agno + 1;
reclaimable += pag->pag_ici_reclaimable;
xfs_perag_put(pag);
}
return reclaimable;
}
STATIC int
xfs_inode_match_id(
struct xfs_inode *ip,
struct xfs_eofblocks *eofb)
{
if ((eofb->eof_flags & XFS_EOF_FLAGS_UID) &&
!uid_eq(VFS_I(ip)->i_uid, eofb->eof_uid))
return 0;
if ((eofb->eof_flags & XFS_EOF_FLAGS_GID) &&
!gid_eq(VFS_I(ip)->i_gid, eofb->eof_gid))
return 0;
if ((eofb->eof_flags & XFS_EOF_FLAGS_PRID) &&
xfs_get_projid(ip) != eofb->eof_prid)
return 0;
return 1;
}
/*
* A union-based inode filtering algorithm. Process the inode if any of the
* criteria match. This is for global/internal scans only.
*/
STATIC int
xfs_inode_match_id_union(
struct xfs_inode *ip,
struct xfs_eofblocks *eofb)
{
if ((eofb->eof_flags & XFS_EOF_FLAGS_UID) &&
uid_eq(VFS_I(ip)->i_uid, eofb->eof_uid))
return 1;
if ((eofb->eof_flags & XFS_EOF_FLAGS_GID) &&
gid_eq(VFS_I(ip)->i_gid, eofb->eof_gid))
return 1;
if ((eofb->eof_flags & XFS_EOF_FLAGS_PRID) &&
xfs_get_projid(ip) == eofb->eof_prid)
return 1;
return 0;
}
STATIC int
xfs_inode_free_eofblocks(
struct xfs_inode *ip,
int flags,
void *args)
{
int ret = 0;
struct xfs_eofblocks *eofb = args;
int match;
if (!xfs_can_free_eofblocks(ip, false)) {
/* inode could be preallocated or append-only */
trace_xfs_inode_free_eofblocks_invalid(ip);
xfs_inode_clear_eofblocks_tag(ip);
return 0;
}
/*
* If the mapping is dirty the operation can block and wait for some
* time. Unless we are waiting, skip it.
*/
if (!(flags & SYNC_WAIT) &&
mapping_tagged(VFS_I(ip)->i_mapping, PAGECACHE_TAG_DIRTY))
return 0;
if (eofb) {
if (eofb->eof_flags & XFS_EOF_FLAGS_UNION)
match = xfs_inode_match_id_union(ip, eofb);
else
match = xfs_inode_match_id(ip, eofb);
if (!match)
return 0;
/* skip the inode if the file size is too small */
if (eofb->eof_flags & XFS_EOF_FLAGS_MINFILESIZE &&
XFS_ISIZE(ip) < eofb->eof_min_file_size)
return 0;
}
/*
* If the caller is waiting, return -EAGAIN to keep the background
* scanner moving and revisit the inode in a subsequent pass.
*/
xfs: sync eofblocks scans under iolock are livelock prone The xfs_eofblocks.eof_scan_owner field is an internal field to facilitate invoking eofb scans from the kernel while under the iolock. This is necessary because the eofb scan acquires the iolock of each inode. Synchronous scans are invoked on certain buffered write failures while under iolock. In such cases, the scan owner indicates that the context for the scan already owns the particular iolock and prevents a double lock deadlock. eofblocks scans while under iolock are still livelock prone in the event of multiple parallel scans, however. If multiple buffered writes to different inodes fail and invoke eofblocks scans at the same time, each scan avoids a deadlock with its own inode by virtue of the eof_scan_owner field, but will never be able to acquire the iolock of the inode from the parallel scan. Because the low free space scans are invoked with SYNC_WAIT, the scan will not return until it has processed every tagged inode and thus both scans will spin indefinitely on the iolock being held across the opposite scan. This problem can be reproduced reliably by generic/224 on systems with higher cpu counts (x16). To avoid this problem, simplify the semantics of eofblocks scans to never invoke a scan while under iolock. This means that the buffered write context must drop the iolock before the scan. It must reacquire the lock before the write retry and also repeat the initial write checks, as the original state might no longer be valid once the iolock was dropped. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-01-28 15:22:56 +08:00
if (!xfs_ilock_nowait(ip, XFS_IOLOCK_EXCL)) {
if (flags & SYNC_WAIT)
ret = -EAGAIN;
return ret;
}
ret = xfs_free_eofblocks(ip);
xfs: sync eofblocks scans under iolock are livelock prone The xfs_eofblocks.eof_scan_owner field is an internal field to facilitate invoking eofb scans from the kernel while under the iolock. This is necessary because the eofb scan acquires the iolock of each inode. Synchronous scans are invoked on certain buffered write failures while under iolock. In such cases, the scan owner indicates that the context for the scan already owns the particular iolock and prevents a double lock deadlock. eofblocks scans while under iolock are still livelock prone in the event of multiple parallel scans, however. If multiple buffered writes to different inodes fail and invoke eofblocks scans at the same time, each scan avoids a deadlock with its own inode by virtue of the eof_scan_owner field, but will never be able to acquire the iolock of the inode from the parallel scan. Because the low free space scans are invoked with SYNC_WAIT, the scan will not return until it has processed every tagged inode and thus both scans will spin indefinitely on the iolock being held across the opposite scan. This problem can be reproduced reliably by generic/224 on systems with higher cpu counts (x16). To avoid this problem, simplify the semantics of eofblocks scans to never invoke a scan while under iolock. This means that the buffered write context must drop the iolock before the scan. It must reacquire the lock before the write retry and also repeat the initial write checks, as the original state might no longer be valid once the iolock was dropped. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-01-28 15:22:56 +08:00
xfs_iunlock(ip, XFS_IOLOCK_EXCL);
return ret;
}
static int
__xfs_icache_free_eofblocks(
struct xfs_mount *mp,
struct xfs_eofblocks *eofb,
int (*execute)(struct xfs_inode *ip, int flags,
void *args),
int tag)
{
int flags = SYNC_TRYLOCK;
if (eofb && (eofb->eof_flags & XFS_EOF_FLAGS_SYNC))
flags = SYNC_WAIT;
return xfs_inode_ag_iterator_tag(mp, execute, flags,
eofb, tag);
}
int
xfs_icache_free_eofblocks(
struct xfs_mount *mp,
struct xfs_eofblocks *eofb)
{
return __xfs_icache_free_eofblocks(mp, eofb, xfs_inode_free_eofblocks,
XFS_ICI_EOFBLOCKS_TAG);
}
xfs: run an eofblocks scan on ENOSPC/EDQUOT From: Brian Foster <bfoster@redhat.com> Speculative preallocation and and the associated throttling metrics assume we're working with large files on large filesystems. Users have reported inefficiencies in these mechanisms when we happen to be dealing with large files on smaller filesystems. This can occur because while prealloc throttling is aggressive under low free space conditions, it is not active until we reach 5% free space or less. For example, a 40GB filesystem has enough space for several files large enough to have multi-GB preallocations at any given time. If those files are slow growing, they might reserve preallocation for long periods of time as well as avoid the background scanner due to frequent modification. If a new file is written under these conditions, said file has no access to this already reserved space and premature ENOSPC is imminent. To handle this scenario, modify the buffered write ENOSPC handling and retry sequence to invoke an eofblocks scan. In the smaller filesystem scenario, the eofblocks scan resets the usage of preallocation such that when the 5% free space threshold is met, throttling effectively takes over to provide fair and efficient preallocation until legitimate ENOSPC. The eofblocks scan is selective based on the nature of the failure. For example, an EDQUOT failure in a particular quota will use a filtered scan for that quota. Because we don't know which quota might have caused an allocation failure at any given time, we include each applicable quota determined to be under low free space conditions in the scan. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-07-24 17:49:28 +08:00
/*
* Run eofblocks scans on the quotas applicable to the inode. For inodes with
* multiple quotas, we don't know exactly which quota caused an allocation
* failure. We make a best effort by including each quota under low free space
* conditions (less than 1% free space) in the scan.
*/
static int
__xfs_inode_free_quota_eofblocks(
struct xfs_inode *ip,
int (*execute)(struct xfs_mount *mp,
struct xfs_eofblocks *eofb))
xfs: run an eofblocks scan on ENOSPC/EDQUOT From: Brian Foster <bfoster@redhat.com> Speculative preallocation and and the associated throttling metrics assume we're working with large files on large filesystems. Users have reported inefficiencies in these mechanisms when we happen to be dealing with large files on smaller filesystems. This can occur because while prealloc throttling is aggressive under low free space conditions, it is not active until we reach 5% free space or less. For example, a 40GB filesystem has enough space for several files large enough to have multi-GB preallocations at any given time. If those files are slow growing, they might reserve preallocation for long periods of time as well as avoid the background scanner due to frequent modification. If a new file is written under these conditions, said file has no access to this already reserved space and premature ENOSPC is imminent. To handle this scenario, modify the buffered write ENOSPC handling and retry sequence to invoke an eofblocks scan. In the smaller filesystem scenario, the eofblocks scan resets the usage of preallocation such that when the 5% free space threshold is met, throttling effectively takes over to provide fair and efficient preallocation until legitimate ENOSPC. The eofblocks scan is selective based on the nature of the failure. For example, an EDQUOT failure in a particular quota will use a filtered scan for that quota. Because we don't know which quota might have caused an allocation failure at any given time, we include each applicable quota determined to be under low free space conditions in the scan. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-07-24 17:49:28 +08:00
{
int scan = 0;
struct xfs_eofblocks eofb = {0};
struct xfs_dquot *dq;
/*
xfs: sync eofblocks scans under iolock are livelock prone The xfs_eofblocks.eof_scan_owner field is an internal field to facilitate invoking eofb scans from the kernel while under the iolock. This is necessary because the eofb scan acquires the iolock of each inode. Synchronous scans are invoked on certain buffered write failures while under iolock. In such cases, the scan owner indicates that the context for the scan already owns the particular iolock and prevents a double lock deadlock. eofblocks scans while under iolock are still livelock prone in the event of multiple parallel scans, however. If multiple buffered writes to different inodes fail and invoke eofblocks scans at the same time, each scan avoids a deadlock with its own inode by virtue of the eof_scan_owner field, but will never be able to acquire the iolock of the inode from the parallel scan. Because the low free space scans are invoked with SYNC_WAIT, the scan will not return until it has processed every tagged inode and thus both scans will spin indefinitely on the iolock being held across the opposite scan. This problem can be reproduced reliably by generic/224 on systems with higher cpu counts (x16). To avoid this problem, simplify the semantics of eofblocks scans to never invoke a scan while under iolock. This means that the buffered write context must drop the iolock before the scan. It must reacquire the lock before the write retry and also repeat the initial write checks, as the original state might no longer be valid once the iolock was dropped. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-01-28 15:22:56 +08:00
* Run a sync scan to increase effectiveness and use the union filter to
xfs: run an eofblocks scan on ENOSPC/EDQUOT From: Brian Foster <bfoster@redhat.com> Speculative preallocation and and the associated throttling metrics assume we're working with large files on large filesystems. Users have reported inefficiencies in these mechanisms when we happen to be dealing with large files on smaller filesystems. This can occur because while prealloc throttling is aggressive under low free space conditions, it is not active until we reach 5% free space or less. For example, a 40GB filesystem has enough space for several files large enough to have multi-GB preallocations at any given time. If those files are slow growing, they might reserve preallocation for long periods of time as well as avoid the background scanner due to frequent modification. If a new file is written under these conditions, said file has no access to this already reserved space and premature ENOSPC is imminent. To handle this scenario, modify the buffered write ENOSPC handling and retry sequence to invoke an eofblocks scan. In the smaller filesystem scenario, the eofblocks scan resets the usage of preallocation such that when the 5% free space threshold is met, throttling effectively takes over to provide fair and efficient preallocation until legitimate ENOSPC. The eofblocks scan is selective based on the nature of the failure. For example, an EDQUOT failure in a particular quota will use a filtered scan for that quota. Because we don't know which quota might have caused an allocation failure at any given time, we include each applicable quota determined to be under low free space conditions in the scan. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-07-24 17:49:28 +08:00
* cover all applicable quotas in a single scan.
*/
eofb.eof_flags = XFS_EOF_FLAGS_UNION|XFS_EOF_FLAGS_SYNC;
if (XFS_IS_UQUOTA_ENFORCED(ip->i_mount)) {
dq = xfs_inode_dquot(ip, XFS_DQ_USER);
if (dq && xfs_dquot_lowsp(dq)) {
eofb.eof_uid = VFS_I(ip)->i_uid;
eofb.eof_flags |= XFS_EOF_FLAGS_UID;
scan = 1;
}
}
if (XFS_IS_GQUOTA_ENFORCED(ip->i_mount)) {
dq = xfs_inode_dquot(ip, XFS_DQ_GROUP);
if (dq && xfs_dquot_lowsp(dq)) {
eofb.eof_gid = VFS_I(ip)->i_gid;
eofb.eof_flags |= XFS_EOF_FLAGS_GID;
scan = 1;
}
}
if (scan)
execute(ip->i_mount, &eofb);
xfs: run an eofblocks scan on ENOSPC/EDQUOT From: Brian Foster <bfoster@redhat.com> Speculative preallocation and and the associated throttling metrics assume we're working with large files on large filesystems. Users have reported inefficiencies in these mechanisms when we happen to be dealing with large files on smaller filesystems. This can occur because while prealloc throttling is aggressive under low free space conditions, it is not active until we reach 5% free space or less. For example, a 40GB filesystem has enough space for several files large enough to have multi-GB preallocations at any given time. If those files are slow growing, they might reserve preallocation for long periods of time as well as avoid the background scanner due to frequent modification. If a new file is written under these conditions, said file has no access to this already reserved space and premature ENOSPC is imminent. To handle this scenario, modify the buffered write ENOSPC handling and retry sequence to invoke an eofblocks scan. In the smaller filesystem scenario, the eofblocks scan resets the usage of preallocation such that when the 5% free space threshold is met, throttling effectively takes over to provide fair and efficient preallocation until legitimate ENOSPC. The eofblocks scan is selective based on the nature of the failure. For example, an EDQUOT failure in a particular quota will use a filtered scan for that quota. Because we don't know which quota might have caused an allocation failure at any given time, we include each applicable quota determined to be under low free space conditions in the scan. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-07-24 17:49:28 +08:00
return scan;
}
int
xfs_inode_free_quota_eofblocks(
struct xfs_inode *ip)
{
return __xfs_inode_free_quota_eofblocks(ip, xfs_icache_free_eofblocks);
}
static inline unsigned long
xfs_iflag_for_tag(
int tag)
{
switch (tag) {
case XFS_ICI_EOFBLOCKS_TAG:
return XFS_IEOFBLOCKS;
case XFS_ICI_COWBLOCKS_TAG:
return XFS_ICOWBLOCKS;
default:
ASSERT(0);
return 0;
}
}
static void
__xfs_inode_set_blocks_tag(
xfs_inode_t *ip,
void (*execute)(struct xfs_mount *mp),
void (*set_tp)(struct xfs_mount *mp, xfs_agnumber_t agno,
int error, unsigned long caller_ip),
int tag)
{
struct xfs_mount *mp = ip->i_mount;
struct xfs_perag *pag;
int tagged;
/*
* Don't bother locking the AG and looking up in the radix trees
* if we already know that we have the tag set.
*/
if (ip->i_flags & xfs_iflag_for_tag(tag))
return;
spin_lock(&ip->i_flags_lock);
ip->i_flags |= xfs_iflag_for_tag(tag);
spin_unlock(&ip->i_flags_lock);
pag = xfs_perag_get(mp, XFS_INO_TO_AGNO(mp, ip->i_ino));
spin_lock(&pag->pag_ici_lock);
tagged = radix_tree_tagged(&pag->pag_ici_root, tag);
radix_tree_tag_set(&pag->pag_ici_root,
XFS_INO_TO_AGINO(ip->i_mount, ip->i_ino), tag);
if (!tagged) {
/* propagate the eofblocks tag up into the perag radix tree */
spin_lock(&ip->i_mount->m_perag_lock);
radix_tree_tag_set(&ip->i_mount->m_perag_tree,
XFS_INO_TO_AGNO(ip->i_mount, ip->i_ino),
tag);
spin_unlock(&ip->i_mount->m_perag_lock);
/* kick off background trimming */
execute(ip->i_mount);
set_tp(ip->i_mount, pag->pag_agno, -1, _RET_IP_);
}
spin_unlock(&pag->pag_ici_lock);
xfs_perag_put(pag);
}
void
xfs_inode_set_eofblocks_tag(
xfs_inode_t *ip)
{
trace_xfs_inode_set_eofblocks_tag(ip);
return __xfs_inode_set_blocks_tag(ip, xfs_queue_eofblocks,
trace_xfs_perag_set_eofblocks,
XFS_ICI_EOFBLOCKS_TAG);
}
static void
__xfs_inode_clear_blocks_tag(
xfs_inode_t *ip,
void (*clear_tp)(struct xfs_mount *mp, xfs_agnumber_t agno,
int error, unsigned long caller_ip),
int tag)
{
struct xfs_mount *mp = ip->i_mount;
struct xfs_perag *pag;
spin_lock(&ip->i_flags_lock);
ip->i_flags &= ~xfs_iflag_for_tag(tag);
spin_unlock(&ip->i_flags_lock);
pag = xfs_perag_get(mp, XFS_INO_TO_AGNO(mp, ip->i_ino));
spin_lock(&pag->pag_ici_lock);
radix_tree_tag_clear(&pag->pag_ici_root,
XFS_INO_TO_AGINO(ip->i_mount, ip->i_ino), tag);
if (!radix_tree_tagged(&pag->pag_ici_root, tag)) {
/* clear the eofblocks tag from the perag radix tree */
spin_lock(&ip->i_mount->m_perag_lock);
radix_tree_tag_clear(&ip->i_mount->m_perag_tree,
XFS_INO_TO_AGNO(ip->i_mount, ip->i_ino),
tag);
spin_unlock(&ip->i_mount->m_perag_lock);
clear_tp(ip->i_mount, pag->pag_agno, -1, _RET_IP_);
}
spin_unlock(&pag->pag_ici_lock);
xfs_perag_put(pag);
}
void
xfs_inode_clear_eofblocks_tag(
xfs_inode_t *ip)
{
trace_xfs_inode_clear_eofblocks_tag(ip);
return __xfs_inode_clear_blocks_tag(ip,
trace_xfs_perag_clear_eofblocks, XFS_ICI_EOFBLOCKS_TAG);
}
/*
* Set ourselves up to free CoW blocks from this file. If it's already clean
* then we can bail out quickly, but otherwise we must back off if the file
* is undergoing some kind of write.
*/
static bool
xfs_prep_free_cowblocks(
struct xfs_inode *ip,
struct xfs_ifork *ifp)
{
xfs: don't skip cow forks w/ delalloc blocks in cowblocks scan The cowblocks background scanner currently clears the cowblocks tag for inodes without any real allocations in the cow fork. This excludes inodes with only delalloc blocks in the cow fork. While we might never expect to clear delalloc blocks from the cow fork in the background scanner, it is not necessarily correct to clear the cowblocks tag from such inodes. For example, if the background scanner happens to process an inode between a buffered write and writeback, the scanner catches the inode in a state after delalloc blocks have been allocated to the cow fork but before the delalloc blocks have been converted to real blocks by writeback. The background scanner then incorrectly clears the cowblocks tag, even if part of the aforementioned delalloc reservation will not be remapped to the data fork (i.e., extra blocks due to the cowextsize hint). This means that any such additional blocks in the cow fork might never be reclaimed by the background scanner and could persist until the inode itself is reclaimed. To address this problem, only skip and clear inodes without any cow fork allocations whatsoever from the background scanner. While we generally do not want to cancel delalloc reservations from the background scanner, the pagecache dirty check following the cowblocks check should prevent that situation. If we do end up with delalloc cow fork blocks without a dirty address space mapping, this is probably an indication that something has gone wrong and the blocks should be reclaimed, as they may never be converted to a real allocation. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 09:53:33 +08:00
/*
* Just clear the tag if we have an empty cow fork or none at all. It's
* possible the inode was fully unshared since it was originally tagged.
*/
if (!xfs_is_reflink_inode(ip) || !ifp->if_bytes) {
trace_xfs_inode_free_cowblocks_invalid(ip);
xfs_inode_clear_cowblocks_tag(ip);
return false;
}
/*
* If the mapping is dirty or under writeback we cannot touch the
* CoW fork. Leave it alone if we're in the midst of a directio.
*/
if ((VFS_I(ip)->i_state & I_DIRTY_PAGES) ||
mapping_tagged(VFS_I(ip)->i_mapping, PAGECACHE_TAG_DIRTY) ||
mapping_tagged(VFS_I(ip)->i_mapping, PAGECACHE_TAG_WRITEBACK) ||
atomic_read(&VFS_I(ip)->i_dio_count))
return false;
return true;
}
/*
* Automatic CoW Reservation Freeing
*
* These functions automatically garbage collect leftover CoW reservations
* that were made on behalf of a cowextsize hint when we start to run out
* of quota or when the reservations sit around for too long. If the file
* has dirty pages or is undergoing writeback, its CoW reservations will
* be retained.
*
* The actual garbage collection piggybacks off the same code that runs
* the speculative EOF preallocation garbage collector.
*/
STATIC int
xfs_inode_free_cowblocks(
struct xfs_inode *ip,
int flags,
void *args)
{
struct xfs_eofblocks *eofb = args;
struct xfs_ifork *ifp = XFS_IFORK_PTR(ip, XFS_COW_FORK);
int match;
int ret = 0;
if (!xfs_prep_free_cowblocks(ip, ifp))
return 0;
if (eofb) {
if (eofb->eof_flags & XFS_EOF_FLAGS_UNION)
match = xfs_inode_match_id_union(ip, eofb);
else
match = xfs_inode_match_id(ip, eofb);
if (!match)
return 0;
/* skip the inode if the file size is too small */
if (eofb->eof_flags & XFS_EOF_FLAGS_MINFILESIZE &&
XFS_ISIZE(ip) < eofb->eof_min_file_size)
return 0;
}
/* Free the CoW blocks */
xfs: sync eofblocks scans under iolock are livelock prone The xfs_eofblocks.eof_scan_owner field is an internal field to facilitate invoking eofb scans from the kernel while under the iolock. This is necessary because the eofb scan acquires the iolock of each inode. Synchronous scans are invoked on certain buffered write failures while under iolock. In such cases, the scan owner indicates that the context for the scan already owns the particular iolock and prevents a double lock deadlock. eofblocks scans while under iolock are still livelock prone in the event of multiple parallel scans, however. If multiple buffered writes to different inodes fail and invoke eofblocks scans at the same time, each scan avoids a deadlock with its own inode by virtue of the eof_scan_owner field, but will never be able to acquire the iolock of the inode from the parallel scan. Because the low free space scans are invoked with SYNC_WAIT, the scan will not return until it has processed every tagged inode and thus both scans will spin indefinitely on the iolock being held across the opposite scan. This problem can be reproduced reliably by generic/224 on systems with higher cpu counts (x16). To avoid this problem, simplify the semantics of eofblocks scans to never invoke a scan while under iolock. This means that the buffered write context must drop the iolock before the scan. It must reacquire the lock before the write retry and also repeat the initial write checks, as the original state might no longer be valid once the iolock was dropped. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-01-28 15:22:56 +08:00
xfs_ilock(ip, XFS_IOLOCK_EXCL);
xfs_ilock(ip, XFS_MMAPLOCK_EXCL);
/*
* Check again, nobody else should be able to dirty blocks or change
* the reflink iflag now that we have the first two locks held.
*/
if (xfs_prep_free_cowblocks(ip, ifp))
ret = xfs_reflink_cancel_cow_range(ip, 0, NULLFILEOFF, false);
xfs: sync eofblocks scans under iolock are livelock prone The xfs_eofblocks.eof_scan_owner field is an internal field to facilitate invoking eofb scans from the kernel while under the iolock. This is necessary because the eofb scan acquires the iolock of each inode. Synchronous scans are invoked on certain buffered write failures while under iolock. In such cases, the scan owner indicates that the context for the scan already owns the particular iolock and prevents a double lock deadlock. eofblocks scans while under iolock are still livelock prone in the event of multiple parallel scans, however. If multiple buffered writes to different inodes fail and invoke eofblocks scans at the same time, each scan avoids a deadlock with its own inode by virtue of the eof_scan_owner field, but will never be able to acquire the iolock of the inode from the parallel scan. Because the low free space scans are invoked with SYNC_WAIT, the scan will not return until it has processed every tagged inode and thus both scans will spin indefinitely on the iolock being held across the opposite scan. This problem can be reproduced reliably by generic/224 on systems with higher cpu counts (x16). To avoid this problem, simplify the semantics of eofblocks scans to never invoke a scan while under iolock. This means that the buffered write context must drop the iolock before the scan. It must reacquire the lock before the write retry and also repeat the initial write checks, as the original state might no longer be valid once the iolock was dropped. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-01-28 15:22:56 +08:00
xfs_iunlock(ip, XFS_MMAPLOCK_EXCL);
xfs_iunlock(ip, XFS_IOLOCK_EXCL);
return ret;
}
int
xfs_icache_free_cowblocks(
struct xfs_mount *mp,
struct xfs_eofblocks *eofb)
{
return __xfs_icache_free_eofblocks(mp, eofb, xfs_inode_free_cowblocks,
XFS_ICI_COWBLOCKS_TAG);
}
int
xfs_inode_free_quota_cowblocks(
struct xfs_inode *ip)
{
return __xfs_inode_free_quota_eofblocks(ip, xfs_icache_free_cowblocks);
}
void
xfs_inode_set_cowblocks_tag(
xfs_inode_t *ip)
{
trace_xfs_inode_set_cowblocks_tag(ip);
return __xfs_inode_set_blocks_tag(ip, xfs_queue_cowblocks,
trace_xfs_perag_set_cowblocks,
XFS_ICI_COWBLOCKS_TAG);
}
void
xfs_inode_clear_cowblocks_tag(
xfs_inode_t *ip)
{
trace_xfs_inode_clear_cowblocks_tag(ip);
return __xfs_inode_clear_blocks_tag(ip,
trace_xfs_perag_clear_cowblocks, XFS_ICI_COWBLOCKS_TAG);
}