UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/arch/arm/mach-imx/common.h

164 lines
5.1 KiB
C
Raw Normal View History

[ARM] 4461/1: MXC platform and i.MX31ADS core support This patch adds the foundation pieces for the Freescale MXC platforms, including i.MX2 and i.MX3 based systems. The bare-bones MX31 support in this patch boots to the rootdev panic with 8250 serial console configured "console=ttyS0,115200". It assumes that Redboot is the boot loader. Signed-off-by: Quinn Jensen <quinn.jensen@freescale.com> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-10 05:06:53 +08:00
/*
* Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
*/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_MXC_COMMON_H__
#define __ASM_ARCH_MXC_COMMON_H__
MXC: add convenience function to register platform devices Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-09-09 16:19:40 +08:00
struct platform_device;
[ARM] MXC: rework timer/clock initialisation - rename mxc_clocks_init to architecture specific versions. This allows us to have more than one architecture compiled in. - call mxc_timer_init from clock initialisation instead from board code Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-02-16 21:36:49 +08:00
struct clk;
arm/imx6q: add suspend/resume support It adds suspend/resume support for imx6q. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 15:08:40 +08:00
enum mxc_cpu_pwr_mode;
MXC: add convenience function to register platform devices Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-09-09 16:19:40 +08:00
MXC: rename mxc_map_io to architecture specific versions This allows us to have more mapping functions for more than one i.MX architecture in the kernel. As this is the earliest board specific hook we have, also use it to set the cpu type. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-03 04:32:10 +08:00
extern void mx1_map_io(void);
extern void mx21_map_io(void);
Add i.MX25 support Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-06-04 17:32:12 +08:00
extern void mx25_map_io(void);
MXC: rename mxc_map_io to architecture specific versions This allows us to have more mapping functions for more than one i.MX architecture in the kernel. As this is the earliest board specific hook we have, also use it to set the cpu type. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-03 04:32:10 +08:00
extern void mx27_map_io(void);
extern void mx31_map_io(void);
extern void mx35_map_io(void);
arm: mx50: add core functions support except clock Add core definitions and memory map, gpio, irq, iomux, uart device support. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-12-30 19:25:05 +08:00
extern void mx50_map_io(void);
mxc: Core support for Freescale i.MX5 series Add basic clock support, cpu identification, I/O mapping, interrupt controller, serial port and ethernet. Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2010-02-05 04:21:53 +08:00
extern void mx51_map_io(void);
ARM: imx: Add core definitions for MX53 Add iomux, clocks, and memory map for Freescale's MX53 SoC. Add cpu_is_mx53 function to common.h. Add 3 more banks of gpio's to mxc_gpio_ports. Add MX53 phys offset address. Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-16 01:29:59 +08:00
extern void mx53_map_io(void);
ARM: imx: use .init_early to initialize cpu type and reset address This used to be done in .map_io which is supposed to only setup the memory mapping. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-07 23:35:19 +08:00
extern void imx1_init_early(void);
extern void imx21_init_early(void);
extern void imx25_init_early(void);
extern void imx27_init_early(void);
ARM: mx3: use .init_early to initialize cpu type, reset address and iomuxer This used to be done in .map_io which is supposed to only setup the memory mapping. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-07 23:35:20 +08:00
extern void imx31_init_early(void);
extern void imx35_init_early(void);
extern void imx50_init_early(void);
ARM: mx5: use .init_early to initialize cpu type, reset address and iomuxer This used to be done in .map_io which is supposed to only setup the memory mapping. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-07 23:35:21 +08:00
extern void imx51_init_early(void);
extern void imx53_init_early(void);
mxc: turn to soc specific init_irq functions Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-25 23:36:19 +08:00
extern void mxc_init_irq(void __iomem *);
mxc: TrustZone interrupt controller (TZIC) for Freescale i.MX5 family Freescale i.MX51 processor uses a new interrupt controller. Add driver for TrustZone Interrupt Controller Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2009-12-04 04:36:41 +08:00
extern void tzic_init_irq(void __iomem *);
mxc: turn to soc specific init_irq functions Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-25 23:36:19 +08:00
extern void mx1_init_irq(void);
extern void mx21_init_irq(void);
Add i.MX25 support Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-06-04 17:32:12 +08:00
extern void mx25_init_irq(void);
mxc: turn to soc specific init_irq functions Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-25 23:36:19 +08:00
extern void mx27_init_irq(void);
extern void mx31_init_irq(void);
extern void mx35_init_irq(void);
arm: mx50: add core functions support except clock Add core definitions and memory map, gpio, irq, iomux, uart device support. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-12-30 19:25:05 +08:00
extern void mx50_init_irq(void);
mxc: Core support for Freescale i.MX5 series Add basic clock support, cpu identification, I/O mapping, interrupt controller, serial port and ethernet. Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2010-02-05 04:21:53 +08:00
extern void mx51_init_irq(void);
ARM: imx: Add core definitions for MX53 Add iomux, clocks, and memory map for Freescale's MX53 SoC. Add cpu_is_mx53 function to common.h. Add 3 more banks of gpio's to mxc_gpio_ports. Add MX53 phys offset address. Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-16 01:29:59 +08:00
extern void mx53_init_irq(void);
gpio/mxc: Change gpio-mxc into an upstanding gpio driver The patch makes necessary changes on gpio-mxc as below to turn it into an upstanding gpio driver. * Add a list to save all mx2 ports references, so that mx2_gpio_irq_handler can walk through all interrupt status registers * Use readl/writel to replace mach-specific accessors __raw_readl/__raw_writel * Change mxc_gpio_init into mxc_gpio_probe function * Move "struct mxc_gpio_port" into gpio-mxc.c, as it needs not to be public at all, and also make some other cleanup on plat-mxc/include/mach/gpio.h at the same time And the patch then migrates mach-imx and mach-mx5 to the updated driver by adding corresponding platform devices. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-06 00:07:55 +08:00
extern void imx1_soc_init(void);
extern void imx21_soc_init(void);
extern void imx25_soc_init(void);
extern void imx27_soc_init(void);
extern void imx31_soc_init(void);
extern void imx35_soc_init(void);
extern void imx50_soc_init(void);
extern void imx51_soc_init(void);
ARM: imx: use machine specific hook for late init Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-26 11:42:34 +08:00
extern void imx51_init_late(void);
ARM: imx: Enable imx53 low power idle Add various functionality needed to enable a imx53 low power idle state. This includes adding the imx53 gpc_dvfs clock and making a common imx5_late_init function and initializing all imx53 MACHINE_STATE late_init calls to imx5_late_init. Signed-off-by: Robert Lee <rob.lee@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-22 06:50:27 +08:00
extern void imx53_init_late(void);
ARM i.MX: remove now unnecessary argument from mxc_timer_init As the timer code now does a clk_get to get its clock we don't need the struct clk argument anymore. This also changes the alternative EPIT timer to do a clk_get. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-16 18:29:53 +08:00
extern void epit_timer_init(void __iomem *base, int irq);
extern void mxc_timer_init(void __iomem *, int);
[ARM] MXC: rework timer/clock initialisation - rename mxc_clocks_init to architecture specific versions. This allows us to have more than one architecture compiled in. - call mxc_timer_init from clock initialisation instead from board code Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-02-16 21:36:49 +08:00
extern int mx1_clocks_init(unsigned long fref);
arm/imx21: clock support for i.MX21 Based on code from "Martin Fuzzey" <mfuzzey@gmail.com> Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-01-26 23:34:54 +08:00
extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
mx25: remove unused mx25_clocks_init() argument The fref is needless on mx25 since the reference clock is fixed at 24MHz. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-25 18:58:19 +08:00
extern int mx25_clocks_init(void);
[ARM] MXC: rework timer/clock initialisation - rename mxc_clocks_init to architecture specific versions. This allows us to have more than one architecture compiled in. - call mxc_timer_init from clock initialisation instead from board code Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-02-16 21:36:49 +08:00
extern int mx27_clocks_init(unsigned long fref);
extern int mx31_clocks_init(unsigned long fref);
[ARM] MX35: add clock support This patch adds clock support for i.MX35 SoCs. We do not support setting of clock rates yet, but most interesting clock rates should be reported. I couldn't test all clock rates and the datasheet contains some obvious bugs, so expect some bugs in this code. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-02-07 00:48:59 +08:00
extern int mx35_clocks_init(void);
mxc: Core support for Freescale i.MX5 series Add basic clock support, cpu identification, I/O mapping, interrupt controller, serial port and ethernet. Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2010-02-05 04:21:53 +08:00
extern int mx51_clocks_init(unsigned long ckil, unsigned long osc,
unsigned long ckih1, unsigned long ckih2);
ARM: imx: Add core definitions for MX53 Add iomux, clocks, and memory map for Freescale's MX53 SoC. Add cpu_is_mx53 function to common.h. Add 3 more banks of gpio's to mxc_gpio_ports. Add MX53 phys offset address. Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-16 01:29:59 +08:00
extern int mx53_clocks_init(unsigned long ckil, unsigned long osc,
unsigned long ckih1, unsigned long ckih2);
ARM i.MX27: Add devicetree support This patch adds basic devicetree support for i.MX27 based SoCs. Only the bindings for which drivers exist are added here: - UART - fec - CSPI - I2C - watchdog - gpio Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-29 04:57:50 +08:00
extern int mx27_clocks_init_dt(void);
ARM i.MX31: Add devicetree support This patch adds basic devicetree support for i.MX31 based SoCs. Only the UART and interrupts bindings are added. Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-07-10 03:39:12 +08:00
extern int mx31_clocks_init_dt(void);
arm/mx5: add device tree support for imx51 babbage It adds device tree support for imx51 babbage board. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:17 +08:00
extern int mx51_clocks_init_dt(void);
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
extern int mx53_clocks_init_dt(void);
arm/imx6q: add device tree machine support It adds generic device tree based machine support for imx6q. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 15:05:25 +08:00
extern int mx6q_clocks_init(void);
gpio/mxc: get rid of the uses of cpu_is_mx() The patch removes all the uses of cpu_is_mx(). Instead, it utilizes platform_device_id to distinguish the different gpio types, IMX1_GPIO on i.mx1, IMX21_GPIO on i.mx21 and i.mx27, IMX31_GPIO on all other i.mx SoCs. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-07 00:37:41 +08:00
extern struct platform_device *mxc_register_gpio(char *name, int id,
gpio/mxc: Change gpio-mxc into an upstanding gpio driver The patch makes necessary changes on gpio-mxc as below to turn it into an upstanding gpio driver. * Add a list to save all mx2 ports references, so that mx2_gpio_irq_handler can walk through all interrupt status registers * Use readl/writel to replace mach-specific accessors __raw_readl/__raw_writel * Change mxc_gpio_init into mxc_gpio_probe function * Move "struct mxc_gpio_port" into gpio-mxc.c, as it needs not to be public at all, and also make some other cleanup on plat-mxc/include/mach/gpio.h at the same time And the patch then migrates mach-imx and mach-mx5 to the updated driver by adding corresponding platform devices. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-06-06 00:07:55 +08:00
resource_size_t iobase, resource_size_t iosize, int irq, int irq_high);
[ARM] MXC: add cpu_is_ macros We had hardcoded cpu_is_ macros for mxc architectures till now. As we want to run the same kernel on i.MX31 and i.MX35 this patch adds cpu_is_ macros which expand to 0 or 1 if only one architecture is compiled in and only check for the cpu type if more than one architecture is compiled in. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-02-06 22:38:22 +08:00
extern void mxc_set_cpu_type(unsigned int type);
ARM: restart: mxc: use new restart hook Hook these platforms restart code into the new restart hook rather than using arch_reset(). Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-07 01:12:08 +08:00
extern void mxc_restart(char, const char *);
system.c: runtime base address Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-06-04 18:19:02 +08:00
extern void mxc_arch_reset_init(void __iomem *);
ARM: imx: Add core definitions for MX53 Add iomux, clocks, and memory map for Freescale's MX53 SoC. Add cpu_is_mx53 function to common.h. Add 3 more banks of gpio's to mxc_gpio_ports. Add MX53 phys offset address. Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-16 01:29:59 +08:00
extern int mx53_revision(void);
ARM: mx53: Print silicon revision on boot Having the silicon revision to appear on the boot log is a useful information. MX31, MX35 and MX51 already show the silicon revision on boot. Add support for displaying such information for MX53 as well. Tested on a mx53loco board, where it shows: CPU identified as i.MX53, silicon rev 2.0 Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> LAKML-Reference: 1301068367-18937-1-git-send-email-fabio.estevam@freescale.com Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-25 23:52:47 +08:00
extern int mx53_display_revision(void);
ARM: mx3: Setup AIPS registers It was observed on a mx31pdk board that audio playback only worked when the bootloader was Redboot, and did not work when U-boot was used. Comparing the sources of these bootloaders showed that the AIPS registers were not setup in U-boot. Instead of relying on the bootloader to setup the AIPS registers, do it in the kernel so that audio playback can work independantly of the bootloader being used. Copied the AIPS settings from Redboot to the kernel. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-29 21:28:08 +08:00
extern void imx_set_aips(void __iomem *);
ARM: imx: call mxc_device_init() in soc specific function mxc_device_init() is a core_initcall function used to register devices for mxc_aips_bus and mxc_ahb_bus, which are needed by gpio and dma device registration. Instead of being a core_initcall function, we have it called in soc specific initialization function before gpio and dma devices get registered, so that it will not be called for other platforms when we enable multi-platform support for imx. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-09-20 14:21:16 +08:00
extern int mxc_device_init(void);
arm/mx5: add device tree support for imx53 boards It adds device tree support for imx53 boards. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-10-17 08:42:16 +08:00
arm/imx: remove cpu_is_xxx() from arch_idle() This patch adds an idle hook imx_idle to be called in arch_idle(). Any soc that needs a customized idle implementation other than cpu_do_idle() can set up this hook in soc specific call. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-09-28 17:16:06 +08:00
enum mxc_cpu_pwr_mode {
WAIT_CLOCKED, /* wfi only */
WAIT_UNCLOCKED, /* WAIT */
WAIT_UNCLOCKED_POWER_OFF, /* WAIT + SRPG */
STOP_POWER_ON, /* just STOP */
STOP_POWER_OFF, /* STOP + SRPG */
};
ARM: mx3: Let mx31 and mx35 enter in LPM mode in WFI The LPM field of register CCMR is used to select the mode that the processor will run when it goes to WFI. When mx31 enters in WFI mode the LPM field is at its reset value of 0, which configures the mx31 to enter in "wait mode". On mx35, the LPM field on mx35 is also at 0 after reset, which corresponds to "run mode" instead of "wait mode". Instead of relying on the reset value of LPM to set the low power mode for WFI, configure mx31 and mx35 to run in "wait mode" Reported-by: Benoit Thebaudeau <benoit.thebaudeau@advansee.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-02-03 06:02:32 +08:00
enum mx3_cpu_pwr_mode {
MX3_RUN,
MX3_WAIT,
MX3_DOZE,
MX3_SLEEP,
};
extern void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode);
ARM: imx: Introduce generic function for displaying silicon revision Currently each i.MX processor has its own function for displaying the silicon revision. Introduce a generic function for this purpose, so that all i.MX processors can reuse it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Jason Liu <jason.hui@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-08-26 13:35:18 +08:00
extern void imx_print_silicon_rev(const char *cpu, int srev);
ARM i.MX avic: add handle_irq function Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-09-20 20:28:17 +08:00
void avic_handle_irq(struct pt_regs *);
ARM i.MX tzic: add handle_irq function Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-09-20 20:28:39 +08:00
void tzic_handle_irq(struct pt_regs *);
ARM i.MX avic: add handle_irq function Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-09-20 20:28:17 +08:00
#define imx1_handle_irq avic_handle_irq
#define imx21_handle_irq avic_handle_irq
#define imx25_handle_irq avic_handle_irq
#define imx27_handle_irq avic_handle_irq
#define imx31_handle_irq avic_handle_irq
#define imx35_handle_irq avic_handle_irq
ARM i.MX tzic: add handle_irq function Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-09-20 20:28:39 +08:00
#define imx50_handle_irq tzic_handle_irq
#define imx51_handle_irq tzic_handle_irq
#define imx53_handle_irq tzic_handle_irq
ARM: imx: convert smp platforms to global gic_handle_irq() Convert the SMP imx platforms to use the global gic_handle_irq() function instead a private function. Cc: Sascha Hauer <kernel@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2011-09-06 17:23:45 +08:00
#define imx6q_handle_irq gic_handle_irq
ARM i.MX avic: add handle_irq function Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-09-20 20:28:17 +08:00
arm/imx6q: add smp and cpu hotplug support It adds smp and cpu hotplug support for imx6q. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 14:59:40 +08:00
extern void imx_enable_cpu(int cpu, bool enable);
extern void imx_set_cpu_jump(int cpu, void *jump_addr);
arm/imx6q: add device tree machine support It adds generic device tree based machine support for imx6q. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 15:05:25 +08:00
#ifdef CONFIG_DEBUG_LL
extern void imx_lluart_map_io(void);
#else
static inline void imx_lluart_map_io(void) {}
#endif
arm/imx6q: add suspend/resume support It adds suspend/resume support for imx6q. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 15:08:40 +08:00
extern void v7_cpu_resume(void);
extern u32 *pl310_get_save_ptr(void);
arm/imx6q: add smp and cpu hotplug support It adds smp and cpu hotplug support for imx6q. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 14:59:40 +08:00
#ifdef CONFIG_SMP
extern void v7_secondary_startup(void);
arm/imx6q: add device tree machine support It adds generic device tree based machine support for imx6q. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 15:05:25 +08:00
extern void imx_scu_map_io(void);
arm/imx6q: add suspend/resume support It adds suspend/resume support for imx6q. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 15:08:40 +08:00
extern void imx_smp_prepare(void);
arm/imx6q: add device tree machine support It adds generic device tree based machine support for imx6q. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 15:05:25 +08:00
#else
static inline void imx_scu_map_io(void) {}
arm/imx6q: add suspend/resume support It adds suspend/resume support for imx6q. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 15:08:40 +08:00
static inline void imx_smp_prepare(void) {}
arm/imx6q: add smp and cpu hotplug support It adds smp and cpu hotplug support for imx6q. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 14:59:40 +08:00
#endif
arm/imx6q: add device tree machine support It adds generic device tree based machine support for imx6q. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 15:05:25 +08:00
extern void imx_enable_cpu(int cpu, bool enable);
extern void imx_set_cpu_jump(int cpu, void *jump_addr);
extern void imx_src_init(void);
ARM: 7198/1: arm/imx6: add restart support for imx6q The restart support was missed from the initial imx6q submission. The mxc_restart() does not work for imx6q. Instead, this patch adds the restart for imx6q. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-12-09 07:51:26 +08:00
extern void imx_src_prepare_restart(void);
arm/imx6q: add device tree machine support It adds generic device tree based machine support for imx6q. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 15:05:25 +08:00
extern void imx_gpc_init(void);
arm/imx6q: add suspend/resume support It adds suspend/resume support for imx6q. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-09-06 15:08:40 +08:00
extern void imx_gpc_pre_suspend(void);
extern void imx_gpc_post_resume(void);
extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
ARM: imx6q: move clock register map to machine_desc.map_io map_io is the only place to call iotable_init. Signed-off-by: Richard Zhao <richard.zhao@linaro.org> [shawn.guo: rename imx_clock_map_io() to imx6q_clock_map_io()] Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-11-17 18:54:29 +08:00
extern void imx6q_clock_map_io(void);
ARM: imx6q: build pm code only when CONFIG_PM selected Signed-off-by: Eric Miao <eric.miao@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-12-21 22:38:23 +08:00
ARM: SoC: convert imx6q to SMP operations Convert the imx6q platform to use struct smp_operations to provide its SMP and CPU hotplug operations. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-09-08 20:15:22 +08:00
extern void imx_cpu_die(unsigned int cpu);
ARM: imx6q: build pm code only when CONFIG_PM selected Signed-off-by: Eric Miao <eric.miao@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-12-21 22:38:23 +08:00
#ifdef CONFIG_PM
extern void imx6q_pm_init(void);
ARM: imx: clean and consolidate imx5 suspend and idle code The imx5 idle code that existed in mm-imx5.c is moved to pm-imx5.c. The imx5_pm_init call is now exported and called during the MACHINE_START late_init in supported imx5 platforms. Remove various enabling/disabling of the gpc_dvfs clock and enable it once during initialization. This is a very low power clock that must be enabled during low power operations. There are only two "suspend_state_t" imx5 low power modes ever used. STOP_POWER_OFF for suspend to mem and WAIT_UNCLOCKED_POWER_OFF for idle and suspend to standby. The latter mode only requires 500 nanoseconds of extra hardware exit time beyond a basic WFI operation (WAIT_CLOCKED mode) so no other idle mode is necessary. Given this information, it is more efficient to keep the registers in the often used WAIT_UNCLOCKED_POWER_OFF state and only to and from the STOP_POWER_OFF register state as needed when suspend to mem is required. Signed-off-by: Robert Lee <rob.lee@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-22 06:50:26 +08:00
extern void imx51_pm_init(void);
ARM: imx: Enable imx53 low power idle Add various functionality needed to enable a imx53 low power idle state. This includes adding the imx53 gpc_dvfs clock and making a common imx5_late_init function and initializing all imx53 MACHINE_STATE late_init calls to imx5_late_init. Signed-off-by: Robert Lee <rob.lee@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-22 06:50:27 +08:00
extern void imx53_pm_init(void);
ARM: imx6q: build pm code only when CONFIG_PM selected Signed-off-by: Eric Miao <eric.miao@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-12-21 22:38:23 +08:00
#else
static inline void imx6q_pm_init(void) {}
ARM: imx: clean and consolidate imx5 suspend and idle code The imx5 idle code that existed in mm-imx5.c is moved to pm-imx5.c. The imx5_pm_init call is now exported and called during the MACHINE_START late_init in supported imx5 platforms. Remove various enabling/disabling of the gpc_dvfs clock and enable it once during initialization. This is a very low power clock that must be enabled during low power operations. There are only two "suspend_state_t" imx5 low power modes ever used. STOP_POWER_OFF for suspend to mem and WAIT_UNCLOCKED_POWER_OFF for idle and suspend to standby. The latter mode only requires 500 nanoseconds of extra hardware exit time beyond a basic WFI operation (WAIT_CLOCKED mode) so no other idle mode is necessary. Given this information, it is more efficient to keep the registers in the often used WAIT_UNCLOCKED_POWER_OFF state and only to and from the STOP_POWER_OFF register state as needed when suspend to mem is required. Signed-off-by: Robert Lee <rob.lee@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-22 06:50:26 +08:00
static inline void imx51_pm_init(void) {}
ARM: imx: Enable imx53 low power idle Add various functionality needed to enable a imx53 low power idle state. This includes adding the imx53 gpc_dvfs clock and making a common imx5_late_init function and initializing all imx53 MACHINE_STATE late_init calls to imx5_late_init. Signed-off-by: Robert Lee <rob.lee@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-05-22 06:50:27 +08:00
static inline void imx53_pm_init(void) {}
ARM: imx6q: build pm code only when CONFIG_PM selected Signed-off-by: Eric Miao <eric.miao@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-12-21 22:38:23 +08:00
#endif
ARM: imx: use machine specific hook for late init Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-26 11:42:34 +08:00
#ifdef CONFIG_NEON
extern int mx51_neon_fixup(void);
#else
static inline int mx51_neon_fixup(void) { return 0; }
#endif
ARM: SoC: convert imx6q to SMP operations Convert the imx6q platform to use struct smp_operations to provide its SMP and CPU hotplug operations. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-09-08 20:15:22 +08:00
extern struct smp_operations imx_smp_ops;
[ARM] 4461/1: MXC platform and i.MX31ADS core support This patch adds the foundation pieces for the Freescale MXC platforms, including i.MX2 and i.MX3 based systems. The bare-bones MX31 support in this patch boots to the rootdev panic with 8250 serial console configured "console=ttyS0,115200". It assumes that Redboot is the boot loader. Signed-off-by: Quinn Jensen <quinn.jensen@freescale.com> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-10 05:06:53 +08:00
#endif