OpenCloudOS-Kernel/arch/arc/kernel/perf_event.c

559 lines
14 KiB
C
Raw Normal View History

/*
* Linux performance counter support for ARC700 series
*
* Copyright (C) 2013-2015 Synopsys, Inc. (www.synopsys.com)
*
* This code is inspired by the perf support of various other architectures.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/perf_event.h>
#include <linux/platform_device.h>
#include <asm/arcregs.h>
#include <asm/stacktrace.h>
struct arc_pmu {
struct pmu pmu;
unsigned int irq;
int n_counters;
ARCv2: perf: implement "event_set_period" This generalization prepares for support of overflow interrupts. Hardware event counters on ARC work that way: Each counter counts from programmed start value (set in ARC_REG_PCT_COUNT) to a limit value (set in ARC_REG_PCT_INT_CNT) and once limit value is reached this timer generates an interrupt. Even though this hardware implementation allows for more flexibility, in Linux kernel we decided to mimic behavior of other architectures this way: [1] Set limit value as half of counter's max value (to allow counter to run after reaching it limit, see below for more explanation): ---------->8----------- arc_pmu->max_period = (1ULL << counter_size) / 2 - 1ULL; ---------->8----------- [2] Set start value as "arc_pmu->max_period - sample_period" and then count up to the limit Our event counters don't stop on reaching max value (the one we set in ARC_REG_PCT_INT_CNT) but continue to count until kernel explicitly stops each of them. And setting a limit as half of counter capacity is done to allow capturing of additional events in between moment when interrupt was triggered until we're actually processing PMU interrupts. That way we're trying to be more precise. For example if we count CPU cycles we keep track of cycles while running through generic IRQ handling code: [1] We set counter period as say 100_000 events of type "crun" [2] Counter reaches that limit and raises its interrupt [3] Once we get in PMU IRQ handler we read current counter value from ARC_REG_PCT_SNAP ans see there something like 105_000. If counters stop on reaching a limit value then we would miss additional 5000 cycles. Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-08-24 18:42:27 +08:00
u64 max_period;
int ev_hw_idx[PERF_COUNT_ARC_HW_MAX];
};
struct arc_pmu_cpu {
/*
* A 1 bit for an index indicates that the counter is being used for
* an event. A 0 means that the counter can be used.
*/
unsigned long used_mask[BITS_TO_LONGS(ARC_PERF_MAX_COUNTERS)];
/*
* The events that are active on the PMU for the given index.
*/
struct perf_event *act_counter[ARC_PERF_MAX_COUNTERS];
};
struct arc_callchain_trace {
int depth;
void *perf_stuff;
};
static int callchain_trace(unsigned int addr, void *data)
{
struct arc_callchain_trace *ctrl = data;
struct perf_callchain_entry_ctx *entry = ctrl->perf_stuff;
perf_callchain_store(entry, addr);
if (ctrl->depth++ < 3)
return 0;
return -1;
}
void
perf_callchain_kernel(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs)
{
struct arc_callchain_trace ctrl = {
.depth = 0,
.perf_stuff = entry,
};
arc_unwind_core(NULL, regs, callchain_trace, &ctrl);
}
void
perf_callchain_user(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs)
{
/*
* User stack can't be unwound trivially with kernel dwarf unwinder
* So for now just record the user PC
*/
perf_callchain_store(entry, instruction_pointer(regs));
}
static struct arc_pmu *arc_pmu;
static DEFINE_PER_CPU(struct arc_pmu_cpu, arc_pmu_cpu);
/* read counter #idx; note that counter# != event# on ARC! */
static uint64_t arc_pmu_read_counter(int idx)
{
uint32_t tmp;
uint64_t result;
/*
* ARC supports making 'snapshots' of the counters, so we don't
* need to care about counters wrapping to 0 underneath our feet
*/
write_aux_reg(ARC_REG_PCT_INDEX, idx);
tmp = read_aux_reg(ARC_REG_PCT_CONTROL);
write_aux_reg(ARC_REG_PCT_CONTROL, tmp | ARC_REG_PCT_CONTROL_SN);
result = (uint64_t) (read_aux_reg(ARC_REG_PCT_SNAPH)) << 32;
result |= read_aux_reg(ARC_REG_PCT_SNAPL);
return result;
}
static void arc_perf_event_update(struct perf_event *event,
struct hw_perf_event *hwc, int idx)
{
ARCv2: perf: implement "event_set_period" This generalization prepares for support of overflow interrupts. Hardware event counters on ARC work that way: Each counter counts from programmed start value (set in ARC_REG_PCT_COUNT) to a limit value (set in ARC_REG_PCT_INT_CNT) and once limit value is reached this timer generates an interrupt. Even though this hardware implementation allows for more flexibility, in Linux kernel we decided to mimic behavior of other architectures this way: [1] Set limit value as half of counter's max value (to allow counter to run after reaching it limit, see below for more explanation): ---------->8----------- arc_pmu->max_period = (1ULL << counter_size) / 2 - 1ULL; ---------->8----------- [2] Set start value as "arc_pmu->max_period - sample_period" and then count up to the limit Our event counters don't stop on reaching max value (the one we set in ARC_REG_PCT_INT_CNT) but continue to count until kernel explicitly stops each of them. And setting a limit as half of counter capacity is done to allow capturing of additional events in between moment when interrupt was triggered until we're actually processing PMU interrupts. That way we're trying to be more precise. For example if we count CPU cycles we keep track of cycles while running through generic IRQ handling code: [1] We set counter period as say 100_000 events of type "crun" [2] Counter reaches that limit and raises its interrupt [3] Once we get in PMU IRQ handler we read current counter value from ARC_REG_PCT_SNAP ans see there something like 105_000. If counters stop on reaching a limit value then we would miss additional 5000 cycles. Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-08-24 18:42:27 +08:00
uint64_t prev_raw_count = local64_read(&hwc->prev_count);
uint64_t new_raw_count = arc_pmu_read_counter(idx);
int64_t delta = new_raw_count - prev_raw_count;
ARCv2: perf: implement "event_set_period" This generalization prepares for support of overflow interrupts. Hardware event counters on ARC work that way: Each counter counts from programmed start value (set in ARC_REG_PCT_COUNT) to a limit value (set in ARC_REG_PCT_INT_CNT) and once limit value is reached this timer generates an interrupt. Even though this hardware implementation allows for more flexibility, in Linux kernel we decided to mimic behavior of other architectures this way: [1] Set limit value as half of counter's max value (to allow counter to run after reaching it limit, see below for more explanation): ---------->8----------- arc_pmu->max_period = (1ULL << counter_size) / 2 - 1ULL; ---------->8----------- [2] Set start value as "arc_pmu->max_period - sample_period" and then count up to the limit Our event counters don't stop on reaching max value (the one we set in ARC_REG_PCT_INT_CNT) but continue to count until kernel explicitly stops each of them. And setting a limit as half of counter capacity is done to allow capturing of additional events in between moment when interrupt was triggered until we're actually processing PMU interrupts. That way we're trying to be more precise. For example if we count CPU cycles we keep track of cycles while running through generic IRQ handling code: [1] We set counter period as say 100_000 events of type "crun" [2] Counter reaches that limit and raises its interrupt [3] Once we get in PMU IRQ handler we read current counter value from ARC_REG_PCT_SNAP ans see there something like 105_000. If counters stop on reaching a limit value then we would miss additional 5000 cycles. Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-08-24 18:42:27 +08:00
/*
* We aren't afraid of hwc->prev_count changing beneath our feet
ARCv2: perf: implement "event_set_period" This generalization prepares for support of overflow interrupts. Hardware event counters on ARC work that way: Each counter counts from programmed start value (set in ARC_REG_PCT_COUNT) to a limit value (set in ARC_REG_PCT_INT_CNT) and once limit value is reached this timer generates an interrupt. Even though this hardware implementation allows for more flexibility, in Linux kernel we decided to mimic behavior of other architectures this way: [1] Set limit value as half of counter's max value (to allow counter to run after reaching it limit, see below for more explanation): ---------->8----------- arc_pmu->max_period = (1ULL << counter_size) / 2 - 1ULL; ---------->8----------- [2] Set start value as "arc_pmu->max_period - sample_period" and then count up to the limit Our event counters don't stop on reaching max value (the one we set in ARC_REG_PCT_INT_CNT) but continue to count until kernel explicitly stops each of them. And setting a limit as half of counter capacity is done to allow capturing of additional events in between moment when interrupt was triggered until we're actually processing PMU interrupts. That way we're trying to be more precise. For example if we count CPU cycles we keep track of cycles while running through generic IRQ handling code: [1] We set counter period as say 100_000 events of type "crun" [2] Counter reaches that limit and raises its interrupt [3] Once we get in PMU IRQ handler we read current counter value from ARC_REG_PCT_SNAP ans see there something like 105_000. If counters stop on reaching a limit value then we would miss additional 5000 cycles. Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-08-24 18:42:27 +08:00
* because there's no way for us to re-enter this function anytime.
*/
local64_set(&hwc->prev_count, new_raw_count);
local64_add(delta, &event->count);
local64_sub(delta, &hwc->period_left);
}
static void arc_pmu_read(struct perf_event *event)
{
arc_perf_event_update(event, &event->hw, event->hw.idx);
}
static int arc_pmu_cache_event(u64 config)
{
unsigned int cache_type, cache_op, cache_result;
int ret;
cache_type = (config >> 0) & 0xff;
cache_op = (config >> 8) & 0xff;
cache_result = (config >> 16) & 0xff;
if (cache_type >= PERF_COUNT_HW_CACHE_MAX)
return -EINVAL;
if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX)
return -EINVAL;
if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
return -EINVAL;
ret = arc_pmu_cache_map[cache_type][cache_op][cache_result];
if (ret == CACHE_OP_UNSUPPORTED)
return -ENOENT;
pr_debug("init cache event: type/op/result %d/%d/%d with h/w %d \'%s\'\n",
cache_type, cache_op, cache_result, ret,
arc_pmu_ev_hw_map[ret]);
return ret;
}
/* initializes hw_perf_event structure if event is supported */
static int arc_pmu_event_init(struct perf_event *event)
{
struct hw_perf_event *hwc = &event->hw;
int ret;
if (!is_sampling_event(event)) {
hwc->sample_period = arc_pmu->max_period;
hwc->last_period = hwc->sample_period;
local64_set(&hwc->period_left, hwc->sample_period);
}
ARCv2: perf: implement "event_set_period" This generalization prepares for support of overflow interrupts. Hardware event counters on ARC work that way: Each counter counts from programmed start value (set in ARC_REG_PCT_COUNT) to a limit value (set in ARC_REG_PCT_INT_CNT) and once limit value is reached this timer generates an interrupt. Even though this hardware implementation allows for more flexibility, in Linux kernel we decided to mimic behavior of other architectures this way: [1] Set limit value as half of counter's max value (to allow counter to run after reaching it limit, see below for more explanation): ---------->8----------- arc_pmu->max_period = (1ULL << counter_size) / 2 - 1ULL; ---------->8----------- [2] Set start value as "arc_pmu->max_period - sample_period" and then count up to the limit Our event counters don't stop on reaching max value (the one we set in ARC_REG_PCT_INT_CNT) but continue to count until kernel explicitly stops each of them. And setting a limit as half of counter capacity is done to allow capturing of additional events in between moment when interrupt was triggered until we're actually processing PMU interrupts. That way we're trying to be more precise. For example if we count CPU cycles we keep track of cycles while running through generic IRQ handling code: [1] We set counter period as say 100_000 events of type "crun" [2] Counter reaches that limit and raises its interrupt [3] Once we get in PMU IRQ handler we read current counter value from ARC_REG_PCT_SNAP ans see there something like 105_000. If counters stop on reaching a limit value then we would miss additional 5000 cycles. Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-08-24 18:42:27 +08:00
hwc->config = 0;
if (is_isa_arcv2()) {
/* "exclude user" means "count only kernel" */
if (event->attr.exclude_user)
hwc->config |= ARC_REG_PCT_CONFIG_KERN;
/* "exclude kernel" means "count only user" */
if (event->attr.exclude_kernel)
hwc->config |= ARC_REG_PCT_CONFIG_USER;
}
switch (event->attr.type) {
case PERF_TYPE_HARDWARE:
if (event->attr.config >= PERF_COUNT_HW_MAX)
return -ENOENT;
if (arc_pmu->ev_hw_idx[event->attr.config] < 0)
return -ENOENT;
hwc->config |= arc_pmu->ev_hw_idx[event->attr.config];
pr_debug("init event %d with h/w %d \'%s\'\n",
(int) event->attr.config, (int) hwc->config,
arc_pmu_ev_hw_map[event->attr.config]);
return 0;
ARCv2: perf: implement "event_set_period" This generalization prepares for support of overflow interrupts. Hardware event counters on ARC work that way: Each counter counts from programmed start value (set in ARC_REG_PCT_COUNT) to a limit value (set in ARC_REG_PCT_INT_CNT) and once limit value is reached this timer generates an interrupt. Even though this hardware implementation allows for more flexibility, in Linux kernel we decided to mimic behavior of other architectures this way: [1] Set limit value as half of counter's max value (to allow counter to run after reaching it limit, see below for more explanation): ---------->8----------- arc_pmu->max_period = (1ULL << counter_size) / 2 - 1ULL; ---------->8----------- [2] Set start value as "arc_pmu->max_period - sample_period" and then count up to the limit Our event counters don't stop on reaching max value (the one we set in ARC_REG_PCT_INT_CNT) but continue to count until kernel explicitly stops each of them. And setting a limit as half of counter capacity is done to allow capturing of additional events in between moment when interrupt was triggered until we're actually processing PMU interrupts. That way we're trying to be more precise. For example if we count CPU cycles we keep track of cycles while running through generic IRQ handling code: [1] We set counter period as say 100_000 events of type "crun" [2] Counter reaches that limit and raises its interrupt [3] Once we get in PMU IRQ handler we read current counter value from ARC_REG_PCT_SNAP ans see there something like 105_000. If counters stop on reaching a limit value then we would miss additional 5000 cycles. Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-08-24 18:42:27 +08:00
case PERF_TYPE_HW_CACHE:
ret = arc_pmu_cache_event(event->attr.config);
if (ret < 0)
return ret;
hwc->config |= arc_pmu->ev_hw_idx[ret];
return 0;
default:
return -ENOENT;
}
}
/* starts all counters */
static void arc_pmu_enable(struct pmu *pmu)
{
uint32_t tmp;
tmp = read_aux_reg(ARC_REG_PCT_CONTROL);
write_aux_reg(ARC_REG_PCT_CONTROL, (tmp & 0xffff0000) | 0x1);
}
/* stops all counters */
static void arc_pmu_disable(struct pmu *pmu)
{
uint32_t tmp;
tmp = read_aux_reg(ARC_REG_PCT_CONTROL);
write_aux_reg(ARC_REG_PCT_CONTROL, (tmp & 0xffff0000) | 0x0);
}
ARCv2: perf: implement "event_set_period" This generalization prepares for support of overflow interrupts. Hardware event counters on ARC work that way: Each counter counts from programmed start value (set in ARC_REG_PCT_COUNT) to a limit value (set in ARC_REG_PCT_INT_CNT) and once limit value is reached this timer generates an interrupt. Even though this hardware implementation allows for more flexibility, in Linux kernel we decided to mimic behavior of other architectures this way: [1] Set limit value as half of counter's max value (to allow counter to run after reaching it limit, see below for more explanation): ---------->8----------- arc_pmu->max_period = (1ULL << counter_size) / 2 - 1ULL; ---------->8----------- [2] Set start value as "arc_pmu->max_period - sample_period" and then count up to the limit Our event counters don't stop on reaching max value (the one we set in ARC_REG_PCT_INT_CNT) but continue to count until kernel explicitly stops each of them. And setting a limit as half of counter capacity is done to allow capturing of additional events in between moment when interrupt was triggered until we're actually processing PMU interrupts. That way we're trying to be more precise. For example if we count CPU cycles we keep track of cycles while running through generic IRQ handling code: [1] We set counter period as say 100_000 events of type "crun" [2] Counter reaches that limit and raises its interrupt [3] Once we get in PMU IRQ handler we read current counter value from ARC_REG_PCT_SNAP ans see there something like 105_000. If counters stop on reaching a limit value then we would miss additional 5000 cycles. Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-08-24 18:42:27 +08:00
static int arc_pmu_event_set_period(struct perf_event *event)
{
struct hw_perf_event *hwc = &event->hw;
s64 left = local64_read(&hwc->period_left);
s64 period = hwc->sample_period;
int idx = hwc->idx;
int overflow = 0;
u64 value;
if (unlikely(left <= -period)) {
/* left underflowed by more than period. */
left = period;
local64_set(&hwc->period_left, left);
hwc->last_period = period;
overflow = 1;
} else if (unlikely(left <= 0)) {
/* left underflowed by less than period. */
left += period;
local64_set(&hwc->period_left, left);
hwc->last_period = period;
overflow = 1;
}
if (left > arc_pmu->max_period)
left = arc_pmu->max_period;
value = arc_pmu->max_period - left;
local64_set(&hwc->prev_count, value);
/* Select counter */
write_aux_reg(ARC_REG_PCT_INDEX, idx);
/* Write value */
write_aux_reg(ARC_REG_PCT_COUNTL, (u32)value);
write_aux_reg(ARC_REG_PCT_COUNTH, (value >> 32));
perf_event_update_userpage(event);
return overflow;
}
/*
* Assigns hardware counter to hardware condition.
* Note that there is no separate start/stop mechanism;
* stopping is achieved by assigning the 'never' condition
*/
static void arc_pmu_start(struct perf_event *event, int flags)
{
struct hw_perf_event *hwc = &event->hw;
int idx = hwc->idx;
if (WARN_ON_ONCE(idx == -1))
return;
if (flags & PERF_EF_RELOAD)
ARCv2: perf: implement "event_set_period" This generalization prepares for support of overflow interrupts. Hardware event counters on ARC work that way: Each counter counts from programmed start value (set in ARC_REG_PCT_COUNT) to a limit value (set in ARC_REG_PCT_INT_CNT) and once limit value is reached this timer generates an interrupt. Even though this hardware implementation allows for more flexibility, in Linux kernel we decided to mimic behavior of other architectures this way: [1] Set limit value as half of counter's max value (to allow counter to run after reaching it limit, see below for more explanation): ---------->8----------- arc_pmu->max_period = (1ULL << counter_size) / 2 - 1ULL; ---------->8----------- [2] Set start value as "arc_pmu->max_period - sample_period" and then count up to the limit Our event counters don't stop on reaching max value (the one we set in ARC_REG_PCT_INT_CNT) but continue to count until kernel explicitly stops each of them. And setting a limit as half of counter capacity is done to allow capturing of additional events in between moment when interrupt was triggered until we're actually processing PMU interrupts. That way we're trying to be more precise. For example if we count CPU cycles we keep track of cycles while running through generic IRQ handling code: [1] We set counter period as say 100_000 events of type "crun" [2] Counter reaches that limit and raises its interrupt [3] Once we get in PMU IRQ handler we read current counter value from ARC_REG_PCT_SNAP ans see there something like 105_000. If counters stop on reaching a limit value then we would miss additional 5000 cycles. Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-08-24 18:42:27 +08:00
WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE));
hwc->state = 0;
ARCv2: perf: implement "event_set_period" This generalization prepares for support of overflow interrupts. Hardware event counters on ARC work that way: Each counter counts from programmed start value (set in ARC_REG_PCT_COUNT) to a limit value (set in ARC_REG_PCT_INT_CNT) and once limit value is reached this timer generates an interrupt. Even though this hardware implementation allows for more flexibility, in Linux kernel we decided to mimic behavior of other architectures this way: [1] Set limit value as half of counter's max value (to allow counter to run after reaching it limit, see below for more explanation): ---------->8----------- arc_pmu->max_period = (1ULL << counter_size) / 2 - 1ULL; ---------->8----------- [2] Set start value as "arc_pmu->max_period - sample_period" and then count up to the limit Our event counters don't stop on reaching max value (the one we set in ARC_REG_PCT_INT_CNT) but continue to count until kernel explicitly stops each of them. And setting a limit as half of counter capacity is done to allow capturing of additional events in between moment when interrupt was triggered until we're actually processing PMU interrupts. That way we're trying to be more precise. For example if we count CPU cycles we keep track of cycles while running through generic IRQ handling code: [1] We set counter period as say 100_000 events of type "crun" [2] Counter reaches that limit and raises its interrupt [3] Once we get in PMU IRQ handler we read current counter value from ARC_REG_PCT_SNAP ans see there something like 105_000. If counters stop on reaching a limit value then we would miss additional 5000 cycles. Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-08-24 18:42:27 +08:00
arc_pmu_event_set_period(event);
/* Enable interrupt for this counter */
if (is_sampling_event(event))
write_aux_reg(ARC_REG_PCT_INT_CTRL,
read_aux_reg(ARC_REG_PCT_INT_CTRL) | (1 << idx));
/* enable ARC pmu here */
write_aux_reg(ARC_REG_PCT_INDEX, idx); /* counter # */
write_aux_reg(ARC_REG_PCT_CONFIG, hwc->config); /* condition */
}
static void arc_pmu_stop(struct perf_event *event, int flags)
{
struct hw_perf_event *hwc = &event->hw;
int idx = hwc->idx;
/* Disable interrupt for this counter */
if (is_sampling_event(event)) {
/*
* Reset interrupt flag by writing of 1. This is required
* to make sure pending interrupt was not left.
*/
write_aux_reg(ARC_REG_PCT_INT_ACT, 1 << idx);
write_aux_reg(ARC_REG_PCT_INT_CTRL,
read_aux_reg(ARC_REG_PCT_INT_CTRL) & ~(1 << idx));
}
if (!(event->hw.state & PERF_HES_STOPPED)) {
/* stop ARC pmu here */
write_aux_reg(ARC_REG_PCT_INDEX, idx);
/* condition code #0 is always "never" */
write_aux_reg(ARC_REG_PCT_CONFIG, 0);
event->hw.state |= PERF_HES_STOPPED;
}
if ((flags & PERF_EF_UPDATE) &&
!(event->hw.state & PERF_HES_UPTODATE)) {
arc_perf_event_update(event, &event->hw, idx);
event->hw.state |= PERF_HES_UPTODATE;
}
}
static void arc_pmu_del(struct perf_event *event, int flags)
{
struct arc_pmu_cpu *pmu_cpu = this_cpu_ptr(&arc_pmu_cpu);
arc_pmu_stop(event, PERF_EF_UPDATE);
__clear_bit(event->hw.idx, pmu_cpu->used_mask);
pmu_cpu->act_counter[event->hw.idx] = 0;
perf_event_update_userpage(event);
}
/* allocate hardware counter and optionally start counting */
static int arc_pmu_add(struct perf_event *event, int flags)
{
struct arc_pmu_cpu *pmu_cpu = this_cpu_ptr(&arc_pmu_cpu);
struct hw_perf_event *hwc = &event->hw;
int idx = hwc->idx;
if (__test_and_set_bit(idx, pmu_cpu->used_mask)) {
idx = find_first_zero_bit(pmu_cpu->used_mask,
arc_pmu->n_counters);
if (idx == arc_pmu->n_counters)
return -EAGAIN;
__set_bit(idx, pmu_cpu->used_mask);
hwc->idx = idx;
}
write_aux_reg(ARC_REG_PCT_INDEX, idx);
pmu_cpu->act_counter[idx] = event;
if (is_sampling_event(event)) {
/* Mimic full counter overflow as other arches do */
write_aux_reg(ARC_REG_PCT_INT_CNTL, (u32)arc_pmu->max_period);
write_aux_reg(ARC_REG_PCT_INT_CNTH,
(arc_pmu->max_period >> 32));
}
write_aux_reg(ARC_REG_PCT_CONFIG, 0);
write_aux_reg(ARC_REG_PCT_COUNTL, 0);
write_aux_reg(ARC_REG_PCT_COUNTH, 0);
local64_set(&hwc->prev_count, 0);
hwc->state = PERF_HES_UPTODATE | PERF_HES_STOPPED;
if (flags & PERF_EF_START)
arc_pmu_start(event, PERF_EF_RELOAD);
perf_event_update_userpage(event);
return 0;
}
#ifdef CONFIG_ISA_ARCV2
static irqreturn_t arc_pmu_intr(int irq, void *dev)
{
struct perf_sample_data data;
struct arc_pmu_cpu *pmu_cpu = this_cpu_ptr(&arc_pmu_cpu);
struct pt_regs *regs;
int active_ints;
int idx;
arc_pmu_disable(&arc_pmu->pmu);
active_ints = read_aux_reg(ARC_REG_PCT_INT_ACT);
regs = get_irq_regs();
for (idx = 0; idx < arc_pmu->n_counters; idx++) {
struct perf_event *event = pmu_cpu->act_counter[idx];
struct hw_perf_event *hwc;
if (!(active_ints & (1 << idx)))
continue;
/* Reset interrupt flag by writing of 1 */
write_aux_reg(ARC_REG_PCT_INT_ACT, 1 << idx);
/*
* On reset of "interrupt active" bit corresponding
* "interrupt enable" bit gets automatically reset as well.
* Now we need to re-enable interrupt for the counter.
*/
write_aux_reg(ARC_REG_PCT_INT_CTRL,
read_aux_reg(ARC_REG_PCT_INT_CTRL) | (1 << idx));
hwc = &event->hw;
WARN_ON_ONCE(hwc->idx != idx);
arc_perf_event_update(event, &event->hw, event->hw.idx);
perf_sample_data_init(&data, 0, hwc->last_period);
if (!arc_pmu_event_set_period(event))
continue;
if (perf_event_overflow(event, &data, regs))
arc_pmu_stop(event, 0);
}
arc_pmu_enable(&arc_pmu->pmu);
return IRQ_HANDLED;
}
#else
static irqreturn_t arc_pmu_intr(int irq, void *dev)
{
return IRQ_NONE;
}
#endif /* CONFIG_ISA_ARCV2 */
ARCv2: perf: Ensure perf intr gets enabled on all cores This was the second perf intr issue perf sampling on multicore requires intr to be enabled on all cores. ARC perf probe code used helper arc_request_percpu_irq() which calls - request_percpu_irq() on core0 - enable_percpu_irq() on all all cores (including core0) genirq requires that request be made ahead of enable call. However if perf probe happened on non core0 (observed on a 3.18 kernel), enable would get called ahead of request, failing obviously and rendering perf intr disabled on all such cores [ 11.120000] 1 ARC perf : 8 counters (48 bits), 113 conditions, [overflow IRQ support] [ 11.130000] 1 -----> enable_percpu_irq() IRQ 20 failed [ 11.140000] 3 -----> enable_percpu_irq() IRQ 20 failed [ 11.140000] 2 -----> enable_percpu_irq() IRQ 20 failed [ 11.140000] 0 =====> request_percpu_irq() IRQ 20 [ 11.140000] 0 -----> enable_percpu_irq() IRQ 20 Fix this fragility, by calling request_percpu_irq() on whatever core calls probe (there is no requirement on which core calls this anyways) and then calling enable on each cores. Interestingly this started as invesigation of STAR 9000838902: "sporadically IRQs enabled on perf prob" which was about occassional boot spew as request_percpu_irq got called non-locally (from an IPI), and re-enabled interrupts in following path proc_mkdir -> spin_unlock_irq() which the irq work code didn't like. | ARC perf : 8 counters (48 bits), 113 conditions, [overflow IRQ support] | | BUG: failure at ../kernel/irq_work.c:135/irq_work_run_list()! | CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.18.10-01127-g285efb8e66d1 #2 | | Stack Trace: | arc_unwind_core.constprop.1+0x94/0x104 | dump_stack+0x62/0x98 | irq_work_run_list+0xb0/0xb4 | irq_work_run+0x22/0x3c | do_IPI+0x74/0x9c | handle_irq_event_percpu+0x34/0x164 | handle_percpu_irq+0x58/0x78 | generic_handle_irq+0x1e/0x2c | arch_do_IRQ+0x3c/0x60 | ret_from_exception+0x0/0x8 Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-snps-arc@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: <stable@vger.kernel.org> #4.2+ Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-12-11 15:43:12 +08:00
static void arc_cpu_pmu_irq_init(void *data)
{
ARCv2: perf: Ensure perf intr gets enabled on all cores This was the second perf intr issue perf sampling on multicore requires intr to be enabled on all cores. ARC perf probe code used helper arc_request_percpu_irq() which calls - request_percpu_irq() on core0 - enable_percpu_irq() on all all cores (including core0) genirq requires that request be made ahead of enable call. However if perf probe happened on non core0 (observed on a 3.18 kernel), enable would get called ahead of request, failing obviously and rendering perf intr disabled on all such cores [ 11.120000] 1 ARC perf : 8 counters (48 bits), 113 conditions, [overflow IRQ support] [ 11.130000] 1 -----> enable_percpu_irq() IRQ 20 failed [ 11.140000] 3 -----> enable_percpu_irq() IRQ 20 failed [ 11.140000] 2 -----> enable_percpu_irq() IRQ 20 failed [ 11.140000] 0 =====> request_percpu_irq() IRQ 20 [ 11.140000] 0 -----> enable_percpu_irq() IRQ 20 Fix this fragility, by calling request_percpu_irq() on whatever core calls probe (there is no requirement on which core calls this anyways) and then calling enable on each cores. Interestingly this started as invesigation of STAR 9000838902: "sporadically IRQs enabled on perf prob" which was about occassional boot spew as request_percpu_irq got called non-locally (from an IPI), and re-enabled interrupts in following path proc_mkdir -> spin_unlock_irq() which the irq work code didn't like. | ARC perf : 8 counters (48 bits), 113 conditions, [overflow IRQ support] | | BUG: failure at ../kernel/irq_work.c:135/irq_work_run_list()! | CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.18.10-01127-g285efb8e66d1 #2 | | Stack Trace: | arc_unwind_core.constprop.1+0x94/0x104 | dump_stack+0x62/0x98 | irq_work_run_list+0xb0/0xb4 | irq_work_run+0x22/0x3c | do_IPI+0x74/0x9c | handle_irq_event_percpu+0x34/0x164 | handle_percpu_irq+0x58/0x78 | generic_handle_irq+0x1e/0x2c | arch_do_IRQ+0x3c/0x60 | ret_from_exception+0x0/0x8 Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-snps-arc@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: <stable@vger.kernel.org> #4.2+ Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-12-11 15:43:12 +08:00
int irq = *(int *)data;
ARCv2: perf: Ensure perf intr gets enabled on all cores This was the second perf intr issue perf sampling on multicore requires intr to be enabled on all cores. ARC perf probe code used helper arc_request_percpu_irq() which calls - request_percpu_irq() on core0 - enable_percpu_irq() on all all cores (including core0) genirq requires that request be made ahead of enable call. However if perf probe happened on non core0 (observed on a 3.18 kernel), enable would get called ahead of request, failing obviously and rendering perf intr disabled on all such cores [ 11.120000] 1 ARC perf : 8 counters (48 bits), 113 conditions, [overflow IRQ support] [ 11.130000] 1 -----> enable_percpu_irq() IRQ 20 failed [ 11.140000] 3 -----> enable_percpu_irq() IRQ 20 failed [ 11.140000] 2 -----> enable_percpu_irq() IRQ 20 failed [ 11.140000] 0 =====> request_percpu_irq() IRQ 20 [ 11.140000] 0 -----> enable_percpu_irq() IRQ 20 Fix this fragility, by calling request_percpu_irq() on whatever core calls probe (there is no requirement on which core calls this anyways) and then calling enable on each cores. Interestingly this started as invesigation of STAR 9000838902: "sporadically IRQs enabled on perf prob" which was about occassional boot spew as request_percpu_irq got called non-locally (from an IPI), and re-enabled interrupts in following path proc_mkdir -> spin_unlock_irq() which the irq work code didn't like. | ARC perf : 8 counters (48 bits), 113 conditions, [overflow IRQ support] | | BUG: failure at ../kernel/irq_work.c:135/irq_work_run_list()! | CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.18.10-01127-g285efb8e66d1 #2 | | Stack Trace: | arc_unwind_core.constprop.1+0x94/0x104 | dump_stack+0x62/0x98 | irq_work_run_list+0xb0/0xb4 | irq_work_run+0x22/0x3c | do_IPI+0x74/0x9c | handle_irq_event_percpu+0x34/0x164 | handle_percpu_irq+0x58/0x78 | generic_handle_irq+0x1e/0x2c | arch_do_IRQ+0x3c/0x60 | ret_from_exception+0x0/0x8 Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-snps-arc@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: <stable@vger.kernel.org> #4.2+ Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-12-11 15:43:12 +08:00
enable_percpu_irq(irq, IRQ_TYPE_NONE);
/* Clear all pending interrupt flags */
write_aux_reg(ARC_REG_PCT_INT_ACT, 0xffffffff);
}
static int arc_pmu_device_probe(struct platform_device *pdev)
{
struct arc_reg_pct_build pct_bcr;
struct arc_reg_cc_build cc_bcr;
int i, j, has_interrupts;
ARCv2: perf: implement "event_set_period" This generalization prepares for support of overflow interrupts. Hardware event counters on ARC work that way: Each counter counts from programmed start value (set in ARC_REG_PCT_COUNT) to a limit value (set in ARC_REG_PCT_INT_CNT) and once limit value is reached this timer generates an interrupt. Even though this hardware implementation allows for more flexibility, in Linux kernel we decided to mimic behavior of other architectures this way: [1] Set limit value as half of counter's max value (to allow counter to run after reaching it limit, see below for more explanation): ---------->8----------- arc_pmu->max_period = (1ULL << counter_size) / 2 - 1ULL; ---------->8----------- [2] Set start value as "arc_pmu->max_period - sample_period" and then count up to the limit Our event counters don't stop on reaching max value (the one we set in ARC_REG_PCT_INT_CNT) but continue to count until kernel explicitly stops each of them. And setting a limit as half of counter capacity is done to allow capturing of additional events in between moment when interrupt was triggered until we're actually processing PMU interrupts. That way we're trying to be more precise. For example if we count CPU cycles we keep track of cycles while running through generic IRQ handling code: [1] We set counter period as say 100_000 events of type "crun" [2] Counter reaches that limit and raises its interrupt [3] Once we get in PMU IRQ handler we read current counter value from ARC_REG_PCT_SNAP ans see there something like 105_000. If counters stop on reaching a limit value then we would miss additional 5000 cycles. Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-08-24 18:42:27 +08:00
int counter_size; /* in bits */
union cc_name {
struct {
uint32_t word0, word1;
char sentinel;
} indiv;
char str[9];
} cc_name;
READ_BCR(ARC_REG_PCT_BUILD, pct_bcr);
if (!pct_bcr.v) {
pr_err("This core does not have performance counters!\n");
return -ENODEV;
}
BUG_ON(pct_bcr.c > ARC_PERF_MAX_COUNTERS);
READ_BCR(ARC_REG_CC_BUILD, cc_bcr);
BUG_ON(!cc_bcr.v); /* Counters exist but No countable conditions ? */
arc_pmu = devm_kzalloc(&pdev->dev, sizeof(struct arc_pmu), GFP_KERNEL);
if (!arc_pmu)
return -ENOMEM;
has_interrupts = is_isa_arcv2() ? pct_bcr.i : 0;
arc_pmu->n_counters = pct_bcr.c;
ARCv2: perf: implement "event_set_period" This generalization prepares for support of overflow interrupts. Hardware event counters on ARC work that way: Each counter counts from programmed start value (set in ARC_REG_PCT_COUNT) to a limit value (set in ARC_REG_PCT_INT_CNT) and once limit value is reached this timer generates an interrupt. Even though this hardware implementation allows for more flexibility, in Linux kernel we decided to mimic behavior of other architectures this way: [1] Set limit value as half of counter's max value (to allow counter to run after reaching it limit, see below for more explanation): ---------->8----------- arc_pmu->max_period = (1ULL << counter_size) / 2 - 1ULL; ---------->8----------- [2] Set start value as "arc_pmu->max_period - sample_period" and then count up to the limit Our event counters don't stop on reaching max value (the one we set in ARC_REG_PCT_INT_CNT) but continue to count until kernel explicitly stops each of them. And setting a limit as half of counter capacity is done to allow capturing of additional events in between moment when interrupt was triggered until we're actually processing PMU interrupts. That way we're trying to be more precise. For example if we count CPU cycles we keep track of cycles while running through generic IRQ handling code: [1] We set counter period as say 100_000 events of type "crun" [2] Counter reaches that limit and raises its interrupt [3] Once we get in PMU IRQ handler we read current counter value from ARC_REG_PCT_SNAP ans see there something like 105_000. If counters stop on reaching a limit value then we would miss additional 5000 cycles. Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-08-24 18:42:27 +08:00
counter_size = 32 + (pct_bcr.s << 4);
ARCv2: perf: implement "event_set_period" This generalization prepares for support of overflow interrupts. Hardware event counters on ARC work that way: Each counter counts from programmed start value (set in ARC_REG_PCT_COUNT) to a limit value (set in ARC_REG_PCT_INT_CNT) and once limit value is reached this timer generates an interrupt. Even though this hardware implementation allows for more flexibility, in Linux kernel we decided to mimic behavior of other architectures this way: [1] Set limit value as half of counter's max value (to allow counter to run after reaching it limit, see below for more explanation): ---------->8----------- arc_pmu->max_period = (1ULL << counter_size) / 2 - 1ULL; ---------->8----------- [2] Set start value as "arc_pmu->max_period - sample_period" and then count up to the limit Our event counters don't stop on reaching max value (the one we set in ARC_REG_PCT_INT_CNT) but continue to count until kernel explicitly stops each of them. And setting a limit as half of counter capacity is done to allow capturing of additional events in between moment when interrupt was triggered until we're actually processing PMU interrupts. That way we're trying to be more precise. For example if we count CPU cycles we keep track of cycles while running through generic IRQ handling code: [1] We set counter period as say 100_000 events of type "crun" [2] Counter reaches that limit and raises its interrupt [3] Once we get in PMU IRQ handler we read current counter value from ARC_REG_PCT_SNAP ans see there something like 105_000. If counters stop on reaching a limit value then we would miss additional 5000 cycles. Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-08-24 18:42:27 +08:00
arc_pmu->max_period = (1ULL << counter_size) / 2 - 1ULL;
pr_info("ARC perf\t: %d counters (%d bits), %d conditions%s\n",
arc_pmu->n_counters, counter_size, cc_bcr.c,
has_interrupts ? ", [overflow IRQ support]":"");
cc_name.str[8] = 0;
for (i = 0; i < PERF_COUNT_ARC_HW_MAX; i++)
arc_pmu->ev_hw_idx[i] = -1;
/* loop thru all available h/w condition indexes */
for (j = 0; j < cc_bcr.c; j++) {
write_aux_reg(ARC_REG_CC_INDEX, j);
cc_name.indiv.word0 = read_aux_reg(ARC_REG_CC_NAME0);
cc_name.indiv.word1 = read_aux_reg(ARC_REG_CC_NAME1);
/* See if it has been mapped to a perf event_id */
for (i = 0; i < ARRAY_SIZE(arc_pmu_ev_hw_map); i++) {
if (arc_pmu_ev_hw_map[i] &&
!strcmp(arc_pmu_ev_hw_map[i], cc_name.str) &&
strlen(arc_pmu_ev_hw_map[i])) {
pr_debug("mapping perf event %2d to h/w event \'%8s\' (idx %d)\n",
i, cc_name.str, j);
arc_pmu->ev_hw_idx[i] = j;
}
}
}
arc_pmu->pmu = (struct pmu) {
.pmu_enable = arc_pmu_enable,
.pmu_disable = arc_pmu_disable,
.event_init = arc_pmu_event_init,
.add = arc_pmu_add,
.del = arc_pmu_del,
.start = arc_pmu_start,
.stop = arc_pmu_stop,
.read = arc_pmu_read,
};
if (has_interrupts) {
int irq = platform_get_irq(pdev, 0);
if (irq < 0) {
pr_err("Cannot get IRQ number for the platform\n");
return -ENODEV;
}
arc_pmu->irq = irq;
ARCv2: perf: Ensure perf intr gets enabled on all cores This was the second perf intr issue perf sampling on multicore requires intr to be enabled on all cores. ARC perf probe code used helper arc_request_percpu_irq() which calls - request_percpu_irq() on core0 - enable_percpu_irq() on all all cores (including core0) genirq requires that request be made ahead of enable call. However if perf probe happened on non core0 (observed on a 3.18 kernel), enable would get called ahead of request, failing obviously and rendering perf intr disabled on all such cores [ 11.120000] 1 ARC perf : 8 counters (48 bits), 113 conditions, [overflow IRQ support] [ 11.130000] 1 -----> enable_percpu_irq() IRQ 20 failed [ 11.140000] 3 -----> enable_percpu_irq() IRQ 20 failed [ 11.140000] 2 -----> enable_percpu_irq() IRQ 20 failed [ 11.140000] 0 =====> request_percpu_irq() IRQ 20 [ 11.140000] 0 -----> enable_percpu_irq() IRQ 20 Fix this fragility, by calling request_percpu_irq() on whatever core calls probe (there is no requirement on which core calls this anyways) and then calling enable on each cores. Interestingly this started as invesigation of STAR 9000838902: "sporadically IRQs enabled on perf prob" which was about occassional boot spew as request_percpu_irq got called non-locally (from an IPI), and re-enabled interrupts in following path proc_mkdir -> spin_unlock_irq() which the irq work code didn't like. | ARC perf : 8 counters (48 bits), 113 conditions, [overflow IRQ support] | | BUG: failure at ../kernel/irq_work.c:135/irq_work_run_list()! | CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.18.10-01127-g285efb8e66d1 #2 | | Stack Trace: | arc_unwind_core.constprop.1+0x94/0x104 | dump_stack+0x62/0x98 | irq_work_run_list+0xb0/0xb4 | irq_work_run+0x22/0x3c | do_IPI+0x74/0x9c | handle_irq_event_percpu+0x34/0x164 | handle_percpu_irq+0x58/0x78 | generic_handle_irq+0x1e/0x2c | arch_do_IRQ+0x3c/0x60 | ret_from_exception+0x0/0x8 Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-snps-arc@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: <stable@vger.kernel.org> #4.2+ Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-12-11 15:43:12 +08:00
/* intc map function ensures irq_set_percpu_devid() called */
request_percpu_irq(irq, arc_pmu_intr, "ARC perf counters",
this_cpu_ptr(&arc_pmu_cpu));
on_each_cpu(arc_cpu_pmu_irq_init, &irq, 1);
} else
arc_pmu->pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT;
return perf_pmu_register(&arc_pmu->pmu, pdev->name, PERF_TYPE_RAW);
}
#ifdef CONFIG_OF
static const struct of_device_id arc_pmu_match[] = {
{ .compatible = "snps,arc700-pct" },
{ .compatible = "snps,archs-pct" },
{},
};
MODULE_DEVICE_TABLE(of, arc_pmu_match);
#endif
static struct platform_driver arc_pmu_driver = {
.driver = {
.name = "arc-pct",
.of_match_table = of_match_ptr(arc_pmu_match),
},
.probe = arc_pmu_device_probe,
};
module_platform_driver(arc_pmu_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Mischa Jonker <mjonker@synopsys.com>");
MODULE_DESCRIPTION("ARC PMU driver");