OpenCloudOS-Kernel/include/asm-generic/io.h

1229 lines
27 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0-or-later */
/* Generic I/O port emulation.
*
* Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*/
#ifndef __ASM_GENERIC_IO_H
#define __ASM_GENERIC_IO_H
#include <asm/page.h> /* I/O is all done through memory accesses */
#include <linux/string.h> /* for memset() and memcpy() */
#include <linux/types.h>
#include <linux/instruction_pointer.h>
#ifdef CONFIG_GENERIC_IOMAP
#include <asm-generic/iomap.h>
#endif
#include <asm/mmiowb.h>
#include <asm-generic/pci_iomap.h>
#ifndef __io_br
#define __io_br() barrier()
#endif
/* prevent prefetching of coherent DMA data ahead of a dma-complete */
#ifndef __io_ar
#ifdef rmb
#define __io_ar(v) rmb()
#else
#define __io_ar(v) barrier()
#endif
#endif
/* flush writes to coherent DMA data before possibly triggering a DMA read */
#ifndef __io_bw
#ifdef wmb
#define __io_bw() wmb()
#else
#define __io_bw() barrier()
#endif
#endif
/* serialize device access against a spin_unlock, usually handled there. */
#ifndef __io_aw
#define __io_aw() mmiowb_set_pending()
#endif
#ifndef __io_pbw
#define __io_pbw() __io_bw()
#endif
#ifndef __io_paw
#define __io_paw() __io_aw()
#endif
#ifndef __io_pbr
#define __io_pbr() __io_br()
#endif
#ifndef __io_par
#define __io_par(v) __io_ar(v)
#endif
/*
* "__DISABLE_TRACE_MMIO__" flag can be used to disable MMIO tracing for
* specific kernel drivers in case of excessive/unwanted logging.
*
* Usage: Add a #define flag at the beginning of the driver file.
* Ex: #define __DISABLE_TRACE_MMIO__
* #include <...>
* ...
*/
#if IS_ENABLED(CONFIG_TRACE_MMIO_ACCESS) && !(defined(__DISABLE_TRACE_MMIO__))
#include <linux/tracepoint-defs.h>
DECLARE_TRACEPOINT(rwmmio_write);
DECLARE_TRACEPOINT(rwmmio_post_write);
DECLARE_TRACEPOINT(rwmmio_read);
DECLARE_TRACEPOINT(rwmmio_post_read);
void log_write_mmio(u64 val, u8 width, volatile void __iomem *addr,
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 22:34:50 +08:00
unsigned long caller_addr, unsigned long caller_addr0);
void log_post_write_mmio(u64 val, u8 width, volatile void __iomem *addr,
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 22:34:50 +08:00
unsigned long caller_addr, unsigned long caller_addr0);
void log_read_mmio(u8 width, const volatile void __iomem *addr,
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 22:34:50 +08:00
unsigned long caller_addr, unsigned long caller_addr0);
void log_post_read_mmio(u64 val, u8 width, const volatile void __iomem *addr,
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 22:34:50 +08:00
unsigned long caller_addr, unsigned long caller_addr0);
#else
static inline void log_write_mmio(u64 val, u8 width, volatile void __iomem *addr,
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 22:34:50 +08:00
unsigned long caller_addr, unsigned long caller_addr0) {}
static inline void log_post_write_mmio(u64 val, u8 width, volatile void __iomem *addr,
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 22:34:50 +08:00
unsigned long caller_addr, unsigned long caller_addr0) {}
static inline void log_read_mmio(u8 width, const volatile void __iomem *addr,
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 22:34:50 +08:00
unsigned long caller_addr, unsigned long caller_addr0) {}
static inline void log_post_read_mmio(u64 val, u8 width, const volatile void __iomem *addr,
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 22:34:50 +08:00
unsigned long caller_addr, unsigned long caller_addr0) {}
#endif /* CONFIG_TRACE_MMIO_ACCESS */
/*
* __raw_{read,write}{b,w,l,q}() access memory in native endianness.
*
* On some architectures memory mapped IO needs to be accessed differently.
* On the simple architectures, we just read/write the memory location
* directly.
*/
#ifndef __raw_readb
#define __raw_readb __raw_readb
static inline u8 __raw_readb(const volatile void __iomem *addr)
{
return *(const volatile u8 __force *)addr;
}
#endif
#ifndef __raw_readw
#define __raw_readw __raw_readw
static inline u16 __raw_readw(const volatile void __iomem *addr)
{
return *(const volatile u16 __force *)addr;
}
#endif
#ifndef __raw_readl
#define __raw_readl __raw_readl
static inline u32 __raw_readl(const volatile void __iomem *addr)
{
return *(const volatile u32 __force *)addr;
}
#endif
#ifdef CONFIG_64BIT
#ifndef __raw_readq
#define __raw_readq __raw_readq
static inline u64 __raw_readq(const volatile void __iomem *addr)
{
return *(const volatile u64 __force *)addr;
}
#endif
#endif /* CONFIG_64BIT */
#ifndef __raw_writeb
#define __raw_writeb __raw_writeb
static inline void __raw_writeb(u8 value, volatile void __iomem *addr)
{
*(volatile u8 __force *)addr = value;
}
#endif
#ifndef __raw_writew
#define __raw_writew __raw_writew
static inline void __raw_writew(u16 value, volatile void __iomem *addr)
{
*(volatile u16 __force *)addr = value;
}
#endif
#ifndef __raw_writel
#define __raw_writel __raw_writel
static inline void __raw_writel(u32 value, volatile void __iomem *addr)
{
*(volatile u32 __force *)addr = value;
}
#endif
#ifdef CONFIG_64BIT
#ifndef __raw_writeq
#define __raw_writeq __raw_writeq
static inline void __raw_writeq(u64 value, volatile void __iomem *addr)
{
*(volatile u64 __force *)addr = value;
}
#endif
#endif /* CONFIG_64BIT */
/*
* {read,write}{b,w,l,q}() access little endian memory and return result in
* native endianness.
*/
#ifndef readb
#define readb readb
static inline u8 readb(const volatile void __iomem *addr)
{
u8 val;
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 22:34:50 +08:00
log_read_mmio(8, addr, _THIS_IP_, _RET_IP_);
__io_br();
val = __raw_readb(addr);
__io_ar(val);
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 22:34:50 +08:00
log_post_read_mmio(val, 8, addr, _THIS_IP_, _RET_IP_);
return val;
}
#endif
#ifndef readw
#define readw readw
static inline u16 readw(const volatile void __iomem *addr)
{
u16 val;
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 22:34:50 +08:00
log_read_mmio(16, addr, _THIS_IP_, _RET_IP_);
__io_br();
asm-generic/io.h: Fix sparse warnings on big-endian architectures On big-endian architectures like OpenRISC, sparse outputs below warnings on asm-generic/io.h. This is due to io statements like: __raw_writel(cpu_to_le32(value), PCI_IOBASE + addr); The __raw_writel() function expects native endianness, however cpu_to_le32() returns __le32. On little-endian machines these match up and there is no issue. However, on big-endian we get warnings, for IO that is defined as little-endian the mismatch is expected. The fix I propose is to __force to native endian. Warnings: ./include/asm-generic/io.h:166:15: warning: cast to restricted __le16 ./include/asm-generic/io.h:166:15: warning: cast to restricted __le16 ./include/asm-generic/io.h:166:15: warning: cast to restricted __le16 ./include/asm-generic/io.h:166:15: warning: cast to restricted __le16 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:215:22: warning: incorrect type in argument 1 (different base types) ./include/asm-generic/io.h:215:22: expected unsigned short [usertype] value ./include/asm-generic/io.h:215:22: got restricted __le16 [usertype] ./include/asm-generic/io.h:225:22: warning: incorrect type in argument 1 (different base types) ./include/asm-generic/io.h:225:22: expected unsigned int [usertype] value ./include/asm-generic/io.h:225:22: got restricted __le32 [usertype] Signed-off-by: Stafford Horne <shorne@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2020-07-29 20:03:14 +08:00
val = __le16_to_cpu((__le16 __force)__raw_readw(addr));
__io_ar(val);
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 22:34:50 +08:00
log_post_read_mmio(val, 16, addr, _THIS_IP_, _RET_IP_);
return val;
}
#endif
#ifndef readl
#define readl readl
static inline u32 readl(const volatile void __iomem *addr)
{
u32 val;
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 22:34:50 +08:00
log_read_mmio(32, addr, _THIS_IP_, _RET_IP_);
__io_br();
asm-generic/io.h: Fix sparse warnings on big-endian architectures On big-endian architectures like OpenRISC, sparse outputs below warnings on asm-generic/io.h. This is due to io statements like: __raw_writel(cpu_to_le32(value), PCI_IOBASE + addr); The __raw_writel() function expects native endianness, however cpu_to_le32() returns __le32. On little-endian machines these match up and there is no issue. However, on big-endian we get warnings, for IO that is defined as little-endian the mismatch is expected. The fix I propose is to __force to native endian. Warnings: ./include/asm-generic/io.h:166:15: warning: cast to restricted __le16 ./include/asm-generic/io.h:166:15: warning: cast to restricted __le16 ./include/asm-generic/io.h:166:15: warning: cast to restricted __le16 ./include/asm-generic/io.h:166:15: warning: cast to restricted __le16 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:215:22: warning: incorrect type in argument 1 (different base types) ./include/asm-generic/io.h:215:22: expected unsigned short [usertype] value ./include/asm-generic/io.h:215:22: got restricted __le16 [usertype] ./include/asm-generic/io.h:225:22: warning: incorrect type in argument 1 (different base types) ./include/asm-generic/io.h:225:22: expected unsigned int [usertype] value ./include/asm-generic/io.h:225:22: got restricted __le32 [usertype] Signed-off-by: Stafford Horne <shorne@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2020-07-29 20:03:14 +08:00
val = __le32_to_cpu((__le32 __force)__raw_readl(addr));
__io_ar(val);
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 22:34:50 +08:00
log_post_read_mmio(val, 32, addr, _THIS_IP_, _RET_IP_);
return val;
}
#endif
#ifdef CONFIG_64BIT
#ifndef readq
#define readq readq
static inline u64 readq(const volatile void __iomem *addr)
{
u64 val;
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 22:34:50 +08:00
log_read_mmio(64, addr, _THIS_IP_, _RET_IP_);
__io_br();
val = __le64_to_cpu((__le64 __force)__raw_readq(addr));
__io_ar(val);
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 22:34:50 +08:00
log_post_read_mmio(val, 64, addr, _THIS_IP_, _RET_IP_);
return val;
}
#endif
#endif /* CONFIG_64BIT */
#ifndef writeb
#define writeb writeb
static inline void writeb(u8 value, volatile void __iomem *addr)
{
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 22:34:50 +08:00
log_write_mmio(value, 8, addr, _THIS_IP_, _RET_IP_);
__io_bw();
__raw_writeb(value, addr);
__io_aw();
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 22:34:50 +08:00
log_post_write_mmio(value, 8, addr, _THIS_IP_, _RET_IP_);
}
#endif
#ifndef writew
#define writew writew
static inline void writew(u16 value, volatile void __iomem *addr)
{
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 22:34:50 +08:00
log_write_mmio(value, 16, addr, _THIS_IP_, _RET_IP_);
__io_bw();
asm-generic/io.h: Fix sparse warnings on big-endian architectures On big-endian architectures like OpenRISC, sparse outputs below warnings on asm-generic/io.h. This is due to io statements like: __raw_writel(cpu_to_le32(value), PCI_IOBASE + addr); The __raw_writel() function expects native endianness, however cpu_to_le32() returns __le32. On little-endian machines these match up and there is no issue. However, on big-endian we get warnings, for IO that is defined as little-endian the mismatch is expected. The fix I propose is to __force to native endian. Warnings: ./include/asm-generic/io.h:166:15: warning: cast to restricted __le16 ./include/asm-generic/io.h:166:15: warning: cast to restricted __le16 ./include/asm-generic/io.h:166:15: warning: cast to restricted __le16 ./include/asm-generic/io.h:166:15: warning: cast to restricted __le16 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:215:22: warning: incorrect type in argument 1 (different base types) ./include/asm-generic/io.h:215:22: expected unsigned short [usertype] value ./include/asm-generic/io.h:215:22: got restricted __le16 [usertype] ./include/asm-generic/io.h:225:22: warning: incorrect type in argument 1 (different base types) ./include/asm-generic/io.h:225:22: expected unsigned int [usertype] value ./include/asm-generic/io.h:225:22: got restricted __le32 [usertype] Signed-off-by: Stafford Horne <shorne@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2020-07-29 20:03:14 +08:00
__raw_writew((u16 __force)cpu_to_le16(value), addr);
__io_aw();
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 22:34:50 +08:00
log_post_write_mmio(value, 16, addr, _THIS_IP_, _RET_IP_);
}
#endif
#ifndef writel
#define writel writel
static inline void writel(u32 value, volatile void __iomem *addr)
{
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 22:34:50 +08:00
log_write_mmio(value, 32, addr, _THIS_IP_, _RET_IP_);
__io_bw();
asm-generic/io.h: Fix sparse warnings on big-endian architectures On big-endian architectures like OpenRISC, sparse outputs below warnings on asm-generic/io.h. This is due to io statements like: __raw_writel(cpu_to_le32(value), PCI_IOBASE + addr); The __raw_writel() function expects native endianness, however cpu_to_le32() returns __le32. On little-endian machines these match up and there is no issue. However, on big-endian we get warnings, for IO that is defined as little-endian the mismatch is expected. The fix I propose is to __force to native endian. Warnings: ./include/asm-generic/io.h:166:15: warning: cast to restricted __le16 ./include/asm-generic/io.h:166:15: warning: cast to restricted __le16 ./include/asm-generic/io.h:166:15: warning: cast to restricted __le16 ./include/asm-generic/io.h:166:15: warning: cast to restricted __le16 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:215:22: warning: incorrect type in argument 1 (different base types) ./include/asm-generic/io.h:215:22: expected unsigned short [usertype] value ./include/asm-generic/io.h:215:22: got restricted __le16 [usertype] ./include/asm-generic/io.h:225:22: warning: incorrect type in argument 1 (different base types) ./include/asm-generic/io.h:225:22: expected unsigned int [usertype] value ./include/asm-generic/io.h:225:22: got restricted __le32 [usertype] Signed-off-by: Stafford Horne <shorne@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2020-07-29 20:03:14 +08:00
__raw_writel((u32 __force)__cpu_to_le32(value), addr);
__io_aw();
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 22:34:50 +08:00
log_post_write_mmio(value, 32, addr, _THIS_IP_, _RET_IP_);
}
#endif
#ifdef CONFIG_64BIT
#ifndef writeq
#define writeq writeq
static inline void writeq(u64 value, volatile void __iomem *addr)
{
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 22:34:50 +08:00
log_write_mmio(value, 64, addr, _THIS_IP_, _RET_IP_);
__io_bw();
__raw_writeq((u64 __force)__cpu_to_le64(value), addr);
__io_aw();
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 22:34:50 +08:00
log_post_write_mmio(value, 64, addr, _THIS_IP_, _RET_IP_);
}
#endif
#endif /* CONFIG_64BIT */
/*
* {read,write}{b,w,l,q}_relaxed() are like the regular version, but
* are not guaranteed to provide ordering against spinlocks or memory
* accesses.
*/
#ifndef readb_relaxed
#define readb_relaxed readb_relaxed
static inline u8 readb_relaxed(const volatile void __iomem *addr)
{
u8 val;
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 22:34:50 +08:00
log_read_mmio(8, addr, _THIS_IP_, _RET_IP_);
val = __raw_readb(addr);
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 22:34:50 +08:00
log_post_read_mmio(val, 8, addr, _THIS_IP_, _RET_IP_);
return val;
}
#endif
#ifndef readw_relaxed
#define readw_relaxed readw_relaxed
static inline u16 readw_relaxed(const volatile void __iomem *addr)
{
u16 val;
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 22:34:50 +08:00
log_read_mmio(16, addr, _THIS_IP_, _RET_IP_);
val = __le16_to_cpu((__le16 __force)__raw_readw(addr));
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 22:34:50 +08:00
log_post_read_mmio(val, 16, addr, _THIS_IP_, _RET_IP_);
return val;
}
#endif
#ifndef readl_relaxed
#define readl_relaxed readl_relaxed
static inline u32 readl_relaxed(const volatile void __iomem *addr)
{
u32 val;
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 22:34:50 +08:00
log_read_mmio(32, addr, _THIS_IP_, _RET_IP_);
val = __le32_to_cpu((__le32 __force)__raw_readl(addr));
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 22:34:50 +08:00
log_post_read_mmio(val, 32, addr, _THIS_IP_, _RET_IP_);
return val;
}
#endif
#if defined(readq) && !defined(readq_relaxed)
#define readq_relaxed readq_relaxed
static inline u64 readq_relaxed(const volatile void __iomem *addr)
{
u64 val;
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 22:34:50 +08:00
log_read_mmio(64, addr, _THIS_IP_, _RET_IP_);
val = __le64_to_cpu((__le64 __force)__raw_readq(addr));
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 22:34:50 +08:00
log_post_read_mmio(val, 64, addr, _THIS_IP_, _RET_IP_);
return val;
}
#endif
#ifndef writeb_relaxed
#define writeb_relaxed writeb_relaxed
static inline void writeb_relaxed(u8 value, volatile void __iomem *addr)
{
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 22:34:50 +08:00
log_write_mmio(value, 8, addr, _THIS_IP_, _RET_IP_);
__raw_writeb(value, addr);
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 22:34:50 +08:00
log_post_write_mmio(value, 8, addr, _THIS_IP_, _RET_IP_);
}
#endif
#ifndef writew_relaxed
#define writew_relaxed writew_relaxed
static inline void writew_relaxed(u16 value, volatile void __iomem *addr)
{
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 22:34:50 +08:00
log_write_mmio(value, 16, addr, _THIS_IP_, _RET_IP_);
__raw_writew((u16 __force)cpu_to_le16(value), addr);
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 22:34:50 +08:00
log_post_write_mmio(value, 16, addr, _THIS_IP_, _RET_IP_);
}
#endif
#ifndef writel_relaxed
#define writel_relaxed writel_relaxed
static inline void writel_relaxed(u32 value, volatile void __iomem *addr)
{
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 22:34:50 +08:00
log_write_mmio(value, 32, addr, _THIS_IP_, _RET_IP_);
__raw_writel((u32 __force)__cpu_to_le32(value), addr);
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 22:34:50 +08:00
log_post_write_mmio(value, 32, addr, _THIS_IP_, _RET_IP_);
}
#endif
#if defined(writeq) && !defined(writeq_relaxed)
#define writeq_relaxed writeq_relaxed
static inline void writeq_relaxed(u64 value, volatile void __iomem *addr)
{
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 22:34:50 +08:00
log_write_mmio(value, 64, addr, _THIS_IP_, _RET_IP_);
__raw_writeq((u64 __force)__cpu_to_le64(value), addr);
asm-generic/io: Add _RET_IP_ to MMIO trace for more accurate debug info Due to compiler optimizations like inlining, there are cases where MMIO traces using _THIS_IP_ for caller information might not be sufficient to provide accurate debug traces. 1) With optimizations (Seen with GCC): In this case, _THIS_IP_ works fine and prints the caller information since it will be inlined into the caller and we get the debug traces on who made the MMIO access, for ex: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 width=32 val=0x0 addr=0xffff8000087447f4 2) Without optimizations (Seen with Clang): _THIS_IP_ will not be sufficient in this case as it will print only the MMIO accessors itself which is of not much use since it is not inlined as below for example: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 So in order to handle this second case as well irrespective of the compiler optimizations, add _RET_IP_ to MMIO trace to make it provide more accurate debug information in all these scenarios. Before: rwmmio_read: readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: readl+0x48/0x80 width=32 val=0x4 addr=0xffff8000087447f4 After: rwmmio_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 addr=0xffff8000087447f4 rwmmio_post_read: qcom_smmu_tlb_sync+0xe0/0x1b0 -> readl+0x4/0x80 width=32 val=0x0 addr=0xffff8000087447f4 Fixes: 210031971cdd ("asm-generic/io: Add logging support for MMIO accessors") Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-10-17 22:34:50 +08:00
log_post_write_mmio(value, 64, addr, _THIS_IP_, _RET_IP_);
}
#endif
/*
* {read,write}s{b,w,l,q}() repeatedly access the same memory address in
* native endianness in 8-, 16-, 32- or 64-bit chunks (@count times).
*/
#ifndef readsb
#define readsb readsb
static inline void readsb(const volatile void __iomem *addr, void *buffer,
unsigned int count)
{
if (count) {
u8 *buf = buffer;
do {
u8 x = __raw_readb(addr);
*buf++ = x;
} while (--count);
}
}
#endif
#ifndef readsw
#define readsw readsw
static inline void readsw(const volatile void __iomem *addr, void *buffer,
unsigned int count)
{
if (count) {
u16 *buf = buffer;
do {
u16 x = __raw_readw(addr);
*buf++ = x;
} while (--count);
}
}
#endif
#ifndef readsl
#define readsl readsl
static inline void readsl(const volatile void __iomem *addr, void *buffer,
unsigned int count)
{
if (count) {
u32 *buf = buffer;
do {
u32 x = __raw_readl(addr);
*buf++ = x;
} while (--count);
}
}
#endif
#ifdef CONFIG_64BIT
#ifndef readsq
#define readsq readsq
static inline void readsq(const volatile void __iomem *addr, void *buffer,
unsigned int count)
{
if (count) {
u64 *buf = buffer;
do {
u64 x = __raw_readq(addr);
*buf++ = x;
} while (--count);
}
}
#endif
#endif /* CONFIG_64BIT */
#ifndef writesb
#define writesb writesb
static inline void writesb(volatile void __iomem *addr, const void *buffer,
unsigned int count)
{
if (count) {
const u8 *buf = buffer;
do {
__raw_writeb(*buf++, addr);
} while (--count);
}
}
#endif
#ifndef writesw
#define writesw writesw
static inline void writesw(volatile void __iomem *addr, const void *buffer,
unsigned int count)
{
if (count) {
const u16 *buf = buffer;
do {
__raw_writew(*buf++, addr);
} while (--count);
}
}
#endif
#ifndef writesl
#define writesl writesl
static inline void writesl(volatile void __iomem *addr, const void *buffer,
unsigned int count)
{
if (count) {
const u32 *buf = buffer;
do {
__raw_writel(*buf++, addr);
} while (--count);
}
}
#endif
#ifdef CONFIG_64BIT
#ifndef writesq
#define writesq writesq
static inline void writesq(volatile void __iomem *addr, const void *buffer,
unsigned int count)
{
if (count) {
const u64 *buf = buffer;
do {
__raw_writeq(*buf++, addr);
} while (--count);
}
}
#endif
#endif /* CONFIG_64BIT */
#ifndef PCI_IOBASE
#define PCI_IOBASE ((void __iomem *)0)
#endif
#ifndef IO_SPACE_LIMIT
#define IO_SPACE_LIMIT 0xffff
#endif
/*
* {in,out}{b,w,l}() access little endian I/O. {in,out}{b,w,l}_p() can be
* implemented on hardware that needs an additional delay for I/O accesses to
* take effect.
*/
#if !defined(inb) && !defined(_inb)
#define _inb _inb
static inline u8 _inb(unsigned long addr)
{
u8 val;
__io_pbr();
val = __raw_readb(PCI_IOBASE + addr);
__io_par(val);
return val;
}
#endif
#if !defined(inw) && !defined(_inw)
#define _inw _inw
static inline u16 _inw(unsigned long addr)
{
u16 val;
__io_pbr();
asm-generic/io.h: Fix sparse warnings on big-endian architectures On big-endian architectures like OpenRISC, sparse outputs below warnings on asm-generic/io.h. This is due to io statements like: __raw_writel(cpu_to_le32(value), PCI_IOBASE + addr); The __raw_writel() function expects native endianness, however cpu_to_le32() returns __le32. On little-endian machines these match up and there is no issue. However, on big-endian we get warnings, for IO that is defined as little-endian the mismatch is expected. The fix I propose is to __force to native endian. Warnings: ./include/asm-generic/io.h:166:15: warning: cast to restricted __le16 ./include/asm-generic/io.h:166:15: warning: cast to restricted __le16 ./include/asm-generic/io.h:166:15: warning: cast to restricted __le16 ./include/asm-generic/io.h:166:15: warning: cast to restricted __le16 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:215:22: warning: incorrect type in argument 1 (different base types) ./include/asm-generic/io.h:215:22: expected unsigned short [usertype] value ./include/asm-generic/io.h:215:22: got restricted __le16 [usertype] ./include/asm-generic/io.h:225:22: warning: incorrect type in argument 1 (different base types) ./include/asm-generic/io.h:225:22: expected unsigned int [usertype] value ./include/asm-generic/io.h:225:22: got restricted __le32 [usertype] Signed-off-by: Stafford Horne <shorne@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2020-07-29 20:03:14 +08:00
val = __le16_to_cpu((__le16 __force)__raw_readw(PCI_IOBASE + addr));
__io_par(val);
return val;
}
#endif
#if !defined(inl) && !defined(_inl)
#define _inl _inl
static inline u32 _inl(unsigned long addr)
{
u32 val;
__io_pbr();
asm-generic/io.h: Fix sparse warnings on big-endian architectures On big-endian architectures like OpenRISC, sparse outputs below warnings on asm-generic/io.h. This is due to io statements like: __raw_writel(cpu_to_le32(value), PCI_IOBASE + addr); The __raw_writel() function expects native endianness, however cpu_to_le32() returns __le32. On little-endian machines these match up and there is no issue. However, on big-endian we get warnings, for IO that is defined as little-endian the mismatch is expected. The fix I propose is to __force to native endian. Warnings: ./include/asm-generic/io.h:166:15: warning: cast to restricted __le16 ./include/asm-generic/io.h:166:15: warning: cast to restricted __le16 ./include/asm-generic/io.h:166:15: warning: cast to restricted __le16 ./include/asm-generic/io.h:166:15: warning: cast to restricted __le16 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:215:22: warning: incorrect type in argument 1 (different base types) ./include/asm-generic/io.h:215:22: expected unsigned short [usertype] value ./include/asm-generic/io.h:215:22: got restricted __le16 [usertype] ./include/asm-generic/io.h:225:22: warning: incorrect type in argument 1 (different base types) ./include/asm-generic/io.h:225:22: expected unsigned int [usertype] value ./include/asm-generic/io.h:225:22: got restricted __le32 [usertype] Signed-off-by: Stafford Horne <shorne@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2020-07-29 20:03:14 +08:00
val = __le32_to_cpu((__le32 __force)__raw_readl(PCI_IOBASE + addr));
__io_par(val);
return val;
}
#endif
#if !defined(outb) && !defined(_outb)
#define _outb _outb
static inline void _outb(u8 value, unsigned long addr)
{
__io_pbw();
__raw_writeb(value, PCI_IOBASE + addr);
__io_paw();
}
#endif
#if !defined(outw) && !defined(_outw)
#define _outw _outw
static inline void _outw(u16 value, unsigned long addr)
{
__io_pbw();
asm-generic/io.h: Fix sparse warnings on big-endian architectures On big-endian architectures like OpenRISC, sparse outputs below warnings on asm-generic/io.h. This is due to io statements like: __raw_writel(cpu_to_le32(value), PCI_IOBASE + addr); The __raw_writel() function expects native endianness, however cpu_to_le32() returns __le32. On little-endian machines these match up and there is no issue. However, on big-endian we get warnings, for IO that is defined as little-endian the mismatch is expected. The fix I propose is to __force to native endian. Warnings: ./include/asm-generic/io.h:166:15: warning: cast to restricted __le16 ./include/asm-generic/io.h:166:15: warning: cast to restricted __le16 ./include/asm-generic/io.h:166:15: warning: cast to restricted __le16 ./include/asm-generic/io.h:166:15: warning: cast to restricted __le16 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:215:22: warning: incorrect type in argument 1 (different base types) ./include/asm-generic/io.h:215:22: expected unsigned short [usertype] value ./include/asm-generic/io.h:215:22: got restricted __le16 [usertype] ./include/asm-generic/io.h:225:22: warning: incorrect type in argument 1 (different base types) ./include/asm-generic/io.h:225:22: expected unsigned int [usertype] value ./include/asm-generic/io.h:225:22: got restricted __le32 [usertype] Signed-off-by: Stafford Horne <shorne@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2020-07-29 20:03:14 +08:00
__raw_writew((u16 __force)cpu_to_le16(value), PCI_IOBASE + addr);
__io_paw();
}
#endif
#if !defined(outl) && !defined(_outl)
#define _outl _outl
static inline void _outl(u32 value, unsigned long addr)
{
__io_pbw();
asm-generic/io.h: Fix sparse warnings on big-endian architectures On big-endian architectures like OpenRISC, sparse outputs below warnings on asm-generic/io.h. This is due to io statements like: __raw_writel(cpu_to_le32(value), PCI_IOBASE + addr); The __raw_writel() function expects native endianness, however cpu_to_le32() returns __le32. On little-endian machines these match up and there is no issue. However, on big-endian we get warnings, for IO that is defined as little-endian the mismatch is expected. The fix I propose is to __force to native endian. Warnings: ./include/asm-generic/io.h:166:15: warning: cast to restricted __le16 ./include/asm-generic/io.h:166:15: warning: cast to restricted __le16 ./include/asm-generic/io.h:166:15: warning: cast to restricted __le16 ./include/asm-generic/io.h:166:15: warning: cast to restricted __le16 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:179:15: warning: cast to restricted __le32 ./include/asm-generic/io.h:215:22: warning: incorrect type in argument 1 (different base types) ./include/asm-generic/io.h:215:22: expected unsigned short [usertype] value ./include/asm-generic/io.h:215:22: got restricted __le16 [usertype] ./include/asm-generic/io.h:225:22: warning: incorrect type in argument 1 (different base types) ./include/asm-generic/io.h:225:22: expected unsigned int [usertype] value ./include/asm-generic/io.h:225:22: got restricted __le32 [usertype] Signed-off-by: Stafford Horne <shorne@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2020-07-29 20:03:14 +08:00
__raw_writel((u32 __force)cpu_to_le32(value), PCI_IOBASE + addr);
__io_paw();
}
#endif
#include <linux/logic_pio.h>
#ifndef inb
#define inb _inb
#endif
#ifndef inw
#define inw _inw
#endif
#ifndef inl
#define inl _inl
#endif
#ifndef outb
#define outb _outb
#endif
#ifndef outw
#define outw _outw
#endif
#ifndef outl
#define outl _outl
#endif
#ifndef inb_p
#define inb_p inb_p
static inline u8 inb_p(unsigned long addr)
{
return inb(addr);
}
#endif
#ifndef inw_p
#define inw_p inw_p
static inline u16 inw_p(unsigned long addr)
{
return inw(addr);
}
#endif
#ifndef inl_p
#define inl_p inl_p
static inline u32 inl_p(unsigned long addr)
{
return inl(addr);
}
#endif
#ifndef outb_p
#define outb_p outb_p
static inline void outb_p(u8 value, unsigned long addr)
{
outb(value, addr);
}
#endif
#ifndef outw_p
#define outw_p outw_p
static inline void outw_p(u16 value, unsigned long addr)
{
outw(value, addr);
}
#endif
#ifndef outl_p
#define outl_p outl_p
static inline void outl_p(u32 value, unsigned long addr)
{
outl(value, addr);
}
#endif
/*
* {in,out}s{b,w,l}{,_p}() are variants of the above that repeatedly access a
* single I/O port multiple times.
*/
#ifndef insb
#define insb insb
static inline void insb(unsigned long addr, void *buffer, unsigned int count)
{
readsb(PCI_IOBASE + addr, buffer, count);
}
#endif
#ifndef insw
#define insw insw
static inline void insw(unsigned long addr, void *buffer, unsigned int count)
{
readsw(PCI_IOBASE + addr, buffer, count);
}
#endif
#ifndef insl
#define insl insl
static inline void insl(unsigned long addr, void *buffer, unsigned int count)
{
readsl(PCI_IOBASE + addr, buffer, count);
}
#endif
#ifndef outsb
#define outsb outsb
static inline void outsb(unsigned long addr, const void *buffer,
unsigned int count)
{
writesb(PCI_IOBASE + addr, buffer, count);
}
#endif
#ifndef outsw
#define outsw outsw
static inline void outsw(unsigned long addr, const void *buffer,
unsigned int count)
{
writesw(PCI_IOBASE + addr, buffer, count);
}
#endif
#ifndef outsl
#define outsl outsl
static inline void outsl(unsigned long addr, const void *buffer,
unsigned int count)
{
writesl(PCI_IOBASE + addr, buffer, count);
}
#endif
#ifndef insb_p
#define insb_p insb_p
static inline void insb_p(unsigned long addr, void *buffer, unsigned int count)
{
insb(addr, buffer, count);
}
#endif
#ifndef insw_p
#define insw_p insw_p
static inline void insw_p(unsigned long addr, void *buffer, unsigned int count)
{
insw(addr, buffer, count);
}
#endif
#ifndef insl_p
#define insl_p insl_p
static inline void insl_p(unsigned long addr, void *buffer, unsigned int count)
{
insl(addr, buffer, count);
}
#endif
#ifndef outsb_p
#define outsb_p outsb_p
static inline void outsb_p(unsigned long addr, const void *buffer,
unsigned int count)
{
outsb(addr, buffer, count);
}
#endif
#ifndef outsw_p
#define outsw_p outsw_p
static inline void outsw_p(unsigned long addr, const void *buffer,
unsigned int count)
{
outsw(addr, buffer, count);
}
#endif
#ifndef outsl_p
#define outsl_p outsl_p
static inline void outsl_p(unsigned long addr, const void *buffer,
unsigned int count)
{
outsl(addr, buffer, count);
}
#endif
#ifndef CONFIG_GENERIC_IOMAP
#ifndef ioread8
#define ioread8 ioread8
static inline u8 ioread8(const volatile void __iomem *addr)
{
return readb(addr);
}
#endif
#ifndef ioread16
#define ioread16 ioread16
static inline u16 ioread16(const volatile void __iomem *addr)
{
return readw(addr);
}
#endif
#ifndef ioread32
#define ioread32 ioread32
static inline u32 ioread32(const volatile void __iomem *addr)
{
return readl(addr);
}
#endif
#ifdef CONFIG_64BIT
#ifndef ioread64
#define ioread64 ioread64
static inline u64 ioread64(const volatile void __iomem *addr)
{
return readq(addr);
}
#endif
#endif /* CONFIG_64BIT */
#ifndef iowrite8
#define iowrite8 iowrite8
static inline void iowrite8(u8 value, volatile void __iomem *addr)
{
writeb(value, addr);
}
#endif
#ifndef iowrite16
#define iowrite16 iowrite16
static inline void iowrite16(u16 value, volatile void __iomem *addr)
{
writew(value, addr);
}
#endif
#ifndef iowrite32
#define iowrite32 iowrite32
static inline void iowrite32(u32 value, volatile void __iomem *addr)
{
writel(value, addr);
}
#endif
#ifdef CONFIG_64BIT
#ifndef iowrite64
#define iowrite64 iowrite64
static inline void iowrite64(u64 value, volatile void __iomem *addr)
{
writeq(value, addr);
}
#endif
#endif /* CONFIG_64BIT */
#ifndef ioread16be
#define ioread16be ioread16be
static inline u16 ioread16be(const volatile void __iomem *addr)
{
return swab16(readw(addr));
}
#endif
#ifndef ioread32be
#define ioread32be ioread32be
static inline u32 ioread32be(const volatile void __iomem *addr)
{
return swab32(readl(addr));
}
#endif
#ifdef CONFIG_64BIT
#ifndef ioread64be
#define ioread64be ioread64be
static inline u64 ioread64be(const volatile void __iomem *addr)
{
return swab64(readq(addr));
}
#endif
#endif /* CONFIG_64BIT */
#ifndef iowrite16be
#define iowrite16be iowrite16be
static inline void iowrite16be(u16 value, void volatile __iomem *addr)
{
writew(swab16(value), addr);
}
#endif
#ifndef iowrite32be
#define iowrite32be iowrite32be
static inline void iowrite32be(u32 value, volatile void __iomem *addr)
{
writel(swab32(value), addr);
}
#endif
#ifdef CONFIG_64BIT
#ifndef iowrite64be
#define iowrite64be iowrite64be
static inline void iowrite64be(u64 value, volatile void __iomem *addr)
{
writeq(swab64(value), addr);
}
#endif
#endif /* CONFIG_64BIT */
#ifndef ioread8_rep
#define ioread8_rep ioread8_rep
static inline void ioread8_rep(const volatile void __iomem *addr, void *buffer,
unsigned int count)
{
readsb(addr, buffer, count);
}
#endif
#ifndef ioread16_rep
#define ioread16_rep ioread16_rep
static inline void ioread16_rep(const volatile void __iomem *addr,
void *buffer, unsigned int count)
{
readsw(addr, buffer, count);
}
#endif
#ifndef ioread32_rep
#define ioread32_rep ioread32_rep
static inline void ioread32_rep(const volatile void __iomem *addr,
void *buffer, unsigned int count)
{
readsl(addr, buffer, count);
}
#endif
#ifdef CONFIG_64BIT
#ifndef ioread64_rep
#define ioread64_rep ioread64_rep
static inline void ioread64_rep(const volatile void __iomem *addr,
void *buffer, unsigned int count)
{
readsq(addr, buffer, count);
}
#endif
#endif /* CONFIG_64BIT */
#ifndef iowrite8_rep
#define iowrite8_rep iowrite8_rep
static inline void iowrite8_rep(volatile void __iomem *addr,
const void *buffer,
unsigned int count)
{
writesb(addr, buffer, count);
}
#endif
#ifndef iowrite16_rep
#define iowrite16_rep iowrite16_rep
static inline void iowrite16_rep(volatile void __iomem *addr,
const void *buffer,
unsigned int count)
{
writesw(addr, buffer, count);
}
#endif
#ifndef iowrite32_rep
#define iowrite32_rep iowrite32_rep
static inline void iowrite32_rep(volatile void __iomem *addr,
const void *buffer,
unsigned int count)
{
writesl(addr, buffer, count);
}
#endif
#ifdef CONFIG_64BIT
#ifndef iowrite64_rep
#define iowrite64_rep iowrite64_rep
static inline void iowrite64_rep(volatile void __iomem *addr,
const void *buffer,
unsigned int count)
{
writesq(addr, buffer, count);
}
#endif
#endif /* CONFIG_64BIT */
#endif /* CONFIG_GENERIC_IOMAP */
#ifdef __KERNEL__
#include <linux/vmalloc.h>
#define __io_virt(x) ((void __force *)(x))
/*
* Change virtual addresses to physical addresses and vv.
* These are pretty trivial
*/
#ifndef virt_to_phys
#define virt_to_phys virt_to_phys
static inline unsigned long virt_to_phys(volatile void *address)
{
return __pa((unsigned long)address);
}
#endif
#ifndef phys_to_virt
#define phys_to_virt phys_to_virt
static inline void *phys_to_virt(unsigned long address)
{
return __va(address);
}
#endif
x86/mm, asm-generic: Add IOMMU ioremap_uc() variant default We currently have no safe way of currently defining architecture agnostic IOMMU ioremap_*() variants. The trend is for folks to *assume* that ioremap_nocache() should be the default everywhere and then add this mapping on each architectures -- this is not correct today for a variety of reasons. We have two options: 1) Sit and wait for every architecture in Linux to get a an ioremap_*() variant defined before including it upstream. 2) Gather consensus on a safe architecture agnostic ioremap_*() default. Approach 1) introduces development latencies, and since 2) will take time and work on clarifying semantics the only remaining sensible thing to do to avoid issues is returning NULL on ioremap_*() variants. In order for this to work we must have all architectures declare their own ioremap_*() variants as defined. This will take some work, do this for ioremp_uc() to set the example as its only currently implemented on x86. Document all this. We only provide implementation support for ioremap_uc() as the other ioremap_*() variants are well defined all over the kernel for other architectures already. Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: arnd@arndb.de Cc: benh@kernel.crashing.org Cc: bp@suse.de Cc: dan.j.williams@intel.com Cc: geert@linux-m68k.org Cc: hch@lst.de Cc: hmh@hmh.eng.br Cc: jgross@suse.com Cc: linux-mm@kvack.org Cc: luto@amacapital.net Cc: mpe@ellerman.id.au Cc: mst@redhat.com Cc: ralf@linux-mips.org Cc: ross.zwisler@linux.intel.com Cc: stefan.bader@canonical.com Cc: tj@kernel.org Cc: tomi.valkeinen@ti.com Cc: toshi.kani@hp.com Link: http://lkml.kernel.org/r/1436488096-3165-1-git-send-email-mcgrof@do-not-panic.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-10 08:28:16 +08:00
/**
* DOC: ioremap() and ioremap_*() variants
*
* Architectures with an MMU are expected to provide ioremap() and iounmap()
* themselves or rely on GENERIC_IOREMAP. For NOMMU architectures we provide
* a default nop-op implementation that expect that the physical address used
* for MMIO are already marked as uncached, and can be used as kernel virtual
* addresses.
x86/mm, asm-generic: Add IOMMU ioremap_uc() variant default We currently have no safe way of currently defining architecture agnostic IOMMU ioremap_*() variants. The trend is for folks to *assume* that ioremap_nocache() should be the default everywhere and then add this mapping on each architectures -- this is not correct today for a variety of reasons. We have two options: 1) Sit and wait for every architecture in Linux to get a an ioremap_*() variant defined before including it upstream. 2) Gather consensus on a safe architecture agnostic ioremap_*() default. Approach 1) introduces development latencies, and since 2) will take time and work on clarifying semantics the only remaining sensible thing to do to avoid issues is returning NULL on ioremap_*() variants. In order for this to work we must have all architectures declare their own ioremap_*() variants as defined. This will take some work, do this for ioremp_uc() to set the example as its only currently implemented on x86. Document all this. We only provide implementation support for ioremap_uc() as the other ioremap_*() variants are well defined all over the kernel for other architectures already. Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: arnd@arndb.de Cc: benh@kernel.crashing.org Cc: bp@suse.de Cc: dan.j.williams@intel.com Cc: geert@linux-m68k.org Cc: hch@lst.de Cc: hmh@hmh.eng.br Cc: jgross@suse.com Cc: linux-mm@kvack.org Cc: luto@amacapital.net Cc: mpe@ellerman.id.au Cc: mst@redhat.com Cc: ralf@linux-mips.org Cc: ross.zwisler@linux.intel.com Cc: stefan.bader@canonical.com Cc: tj@kernel.org Cc: tomi.valkeinen@ti.com Cc: toshi.kani@hp.com Link: http://lkml.kernel.org/r/1436488096-3165-1-git-send-email-mcgrof@do-not-panic.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-10 08:28:16 +08:00
*
* ioremap_wc() and ioremap_wt() can provide more relaxed caching attributes
* for specific drivers if the architecture choses to implement them. If they
* are not implemented we fall back to plain ioremap. Conversely, ioremap_np()
* can provide stricter non-posted write semantics if the architecture
* implements them.
x86/mm, asm-generic: Add IOMMU ioremap_uc() variant default We currently have no safe way of currently defining architecture agnostic IOMMU ioremap_*() variants. The trend is for folks to *assume* that ioremap_nocache() should be the default everywhere and then add this mapping on each architectures -- this is not correct today for a variety of reasons. We have two options: 1) Sit and wait for every architecture in Linux to get a an ioremap_*() variant defined before including it upstream. 2) Gather consensus on a safe architecture agnostic ioremap_*() default. Approach 1) introduces development latencies, and since 2) will take time and work on clarifying semantics the only remaining sensible thing to do to avoid issues is returning NULL on ioremap_*() variants. In order for this to work we must have all architectures declare their own ioremap_*() variants as defined. This will take some work, do this for ioremp_uc() to set the example as its only currently implemented on x86. Document all this. We only provide implementation support for ioremap_uc() as the other ioremap_*() variants are well defined all over the kernel for other architectures already. Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: arnd@arndb.de Cc: benh@kernel.crashing.org Cc: bp@suse.de Cc: dan.j.williams@intel.com Cc: geert@linux-m68k.org Cc: hch@lst.de Cc: hmh@hmh.eng.br Cc: jgross@suse.com Cc: linux-mm@kvack.org Cc: luto@amacapital.net Cc: mpe@ellerman.id.au Cc: mst@redhat.com Cc: ralf@linux-mips.org Cc: ross.zwisler@linux.intel.com Cc: stefan.bader@canonical.com Cc: tj@kernel.org Cc: tomi.valkeinen@ti.com Cc: toshi.kani@hp.com Link: http://lkml.kernel.org/r/1436488096-3165-1-git-send-email-mcgrof@do-not-panic.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-07-10 08:28:16 +08:00
*/
#ifndef CONFIG_MMU
#ifndef ioremap
#define ioremap ioremap
static inline void __iomem *ioremap(phys_addr_t offset, size_t size)
{
return (void __iomem *)(unsigned long)offset;
}
#endif
#ifndef iounmap
#define iounmap iounmap
static inline void iounmap(volatile void __iomem *addr)
{
}
#endif
#elif defined(CONFIG_GENERIC_IOREMAP)
mm: introduce include/linux/pgtable.h The include/linux/pgtable.h is going to be the home of generic page table manipulation functions. Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and make the latter include asm/pgtable.h. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 12:32:38 +08:00
#include <linux/pgtable.h>
/*
* Arch code can implement the following two hooks when using GENERIC_IOREMAP
* ioremap_allowed() return a bool,
* - true means continue to remap
* - false means skip remap and return directly
* iounmap_allowed() return a bool,
* - true means continue to vunmap
* - false means skip vunmap and return directly
*/
#ifndef ioremap_allowed
#define ioremap_allowed ioremap_allowed
static inline bool ioremap_allowed(phys_addr_t phys_addr, size_t size,
unsigned long prot)
{
return true;
}
#endif
#ifndef iounmap_allowed
#define iounmap_allowed iounmap_allowed
static inline bool iounmap_allowed(void *addr)
{
return true;
}
#endif
void __iomem *ioremap_prot(phys_addr_t phys_addr, size_t size,
unsigned long prot);
void iounmap(volatile void __iomem *addr);
static inline void __iomem *ioremap(phys_addr_t addr, size_t size)
{
/* _PAGE_IOREMAP needs to be supplied by the architecture */
return ioremap_prot(addr, size, _PAGE_IOREMAP);
}
#endif /* !CONFIG_MMU || CONFIG_GENERIC_IOREMAP */
#ifndef ioremap_wc
#define ioremap_wc ioremap
#endif
#ifndef ioremap_wt
#define ioremap_wt ioremap
#endif
/*
* ioremap_uc is special in that we do require an explicit architecture
* implementation. In general you do not want to use this function in a
* driver and use plain ioremap, which is uncached by default. Similarly
* architectures should not implement it unless they have a very good
* reason.
*/
#ifndef ioremap_uc
#define ioremap_uc ioremap_uc
static inline void __iomem *ioremap_uc(phys_addr_t offset, size_t size)
{
return NULL;
}
#endif
/*
* ioremap_np needs an explicit architecture implementation, as it
* requests stronger semantics than regular ioremap(). Portable drivers
* should instead use one of the higher-level abstractions, like
* devm_ioremap_resource(), to choose the correct variant for any given
* device and bus. Portable drivers with a good reason to want non-posted
* write semantics should always provide an ioremap() fallback in case
* ioremap_np() is not available.
*/
#ifndef ioremap_np
#define ioremap_np ioremap_np
static inline void __iomem *ioremap_np(phys_addr_t offset, size_t size)
{
return NULL;
}
#endif
#ifdef CONFIG_HAS_IOPORT_MAP
#ifndef CONFIG_GENERIC_IOMAP
#ifndef ioport_map
#define ioport_map ioport_map
static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
{
port &= IO_SPACE_LIMIT;
return (port > MMIO_UPPER_LIMIT) ? NULL : PCI_IOBASE + port;
}
#define ARCH_HAS_GENERIC_IOPORT_MAP
#endif
#ifndef ioport_unmap
#define ioport_unmap ioport_unmap
static inline void ioport_unmap(void __iomem *p)
{
}
#endif
#else /* CONFIG_GENERIC_IOMAP */
extern void __iomem *ioport_map(unsigned long port, unsigned int nr);
extern void ioport_unmap(void __iomem *p);
#endif /* CONFIG_GENERIC_IOMAP */
#endif /* CONFIG_HAS_IOPORT_MAP */
asm-generic/io.h: Fix !CONFIG_GENERIC_IOMAP pci_iounmap() implementation For arches that do not select CONFIG_GENERIC_IOMAP, the current pci_iounmap() function does nothing causing obvious memory leaks for mapped regions that are backed by MMIO physical space. In order to detect if a mapped pointer is IO vs MMIO, a check must made available to the pci_iounmap() function so that it can actually detect whether the pointer has to be unmapped. In configurations where CONFIG_HAS_IOPORT_MAP && !CONFIG_GENERIC_IOMAP, a mapped port is detected using an ioport_map() stub defined in asm-generic/io.h. Use the same logic to implement a stub (ie __pci_ioport_unmap()) that detects if the passed in pointer in pci_iounmap() is IO vs MMIO to iounmap conditionally and call it in pci_iounmap() fixing the issue. Leave __pci_ioport_unmap() as a NOP for all other config options. Tested-by: George Cherian <george.cherian@marvell.com> Link: https://lore.kernel.org/lkml/20200905024811.74701-1-yangyingliang@huawei.com Link: https://lore.kernel.org/lkml/20200824132046.3114383-1-george.cherian@marvell.com Link: https://lore.kernel.org/r/a9daf8d8444d0ebd00bc6d64e336ec49dbb50784.1600254147.git.lorenzo.pieralisi@arm.com Reported-by: George Cherian <george.cherian@marvell.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: George Cherian <george.cherian@marvell.com> Cc: Will Deacon <will@kernel.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Yang Yingliang <yangyingliang@huawei.com>
2020-09-16 19:06:58 +08:00
#ifndef CONFIG_GENERIC_IOMAP
#ifndef pci_iounmap
#define ARCH_WANTS_GENERIC_PCI_IOUNMAP
#endif
asm-generic/io.h: Fix !CONFIG_GENERIC_IOMAP pci_iounmap() implementation For arches that do not select CONFIG_GENERIC_IOMAP, the current pci_iounmap() function does nothing causing obvious memory leaks for mapped regions that are backed by MMIO physical space. In order to detect if a mapped pointer is IO vs MMIO, a check must made available to the pci_iounmap() function so that it can actually detect whether the pointer has to be unmapped. In configurations where CONFIG_HAS_IOPORT_MAP && !CONFIG_GENERIC_IOMAP, a mapped port is detected using an ioport_map() stub defined in asm-generic/io.h. Use the same logic to implement a stub (ie __pci_ioport_unmap()) that detects if the passed in pointer in pci_iounmap() is IO vs MMIO to iounmap conditionally and call it in pci_iounmap() fixing the issue. Leave __pci_ioport_unmap() as a NOP for all other config options. Tested-by: George Cherian <george.cherian@marvell.com> Link: https://lore.kernel.org/lkml/20200905024811.74701-1-yangyingliang@huawei.com Link: https://lore.kernel.org/lkml/20200824132046.3114383-1-george.cherian@marvell.com Link: https://lore.kernel.org/r/a9daf8d8444d0ebd00bc6d64e336ec49dbb50784.1600254147.git.lorenzo.pieralisi@arm.com Reported-by: George Cherian <george.cherian@marvell.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: George Cherian <george.cherian@marvell.com> Cc: Will Deacon <will@kernel.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Yang Yingliang <yangyingliang@huawei.com>
2020-09-16 19:06:58 +08:00
#endif
#ifndef xlate_dev_mem_ptr
#define xlate_dev_mem_ptr xlate_dev_mem_ptr
static inline void *xlate_dev_mem_ptr(phys_addr_t addr)
{
return __va(addr);
}
#endif
#ifndef unxlate_dev_mem_ptr
#define unxlate_dev_mem_ptr unxlate_dev_mem_ptr
static inline void unxlate_dev_mem_ptr(phys_addr_t phys, void *addr)
{
}
#endif
#ifndef memset_io
#define memset_io memset_io
/**
* memset_io Set a range of I/O memory to a constant value
* @addr: The beginning of the I/O-memory range to set
* @val: The value to set the memory to
* @count: The number of bytes to set
*
* Set a range of I/O memory to a given value.
*/
static inline void memset_io(volatile void __iomem *addr, int value,
size_t size)
{
memset(__io_virt(addr), value, size);
}
#endif
#ifndef memcpy_fromio
#define memcpy_fromio memcpy_fromio
/**
* memcpy_fromio Copy a block of data from I/O memory
* @dst: The (RAM) destination for the copy
* @src: The (I/O memory) source for the data
* @count: The number of bytes to copy
*
* Copy a block of data from I/O memory.
*/
static inline void memcpy_fromio(void *buffer,
const volatile void __iomem *addr,
size_t size)
{
memcpy(buffer, __io_virt(addr), size);
}
#endif
#ifndef memcpy_toio
#define memcpy_toio memcpy_toio
/**
* memcpy_toio Copy a block of data into I/O memory
* @dst: The (I/O memory) destination for the copy
* @src: The (RAM) source for the data
* @count: The number of bytes to copy
*
* Copy a block of data to I/O memory.
*/
static inline void memcpy_toio(volatile void __iomem *addr, const void *buffer,
size_t size)
{
memcpy(__io_virt(addr), buffer, size);
}
#endif
extern int devmem_is_allowed(unsigned long pfn);
#endif /* __KERNEL__ */
#endif /* __ASM_GENERIC_IO_H */