UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/net/batman-adv/bat_v_elp.c

535 lines
16 KiB
C
Raw Normal View History

batman-adv: ELP - adding basic infrastructure The B.A.T.M.A.N. protocol originally only used a single message type (called OGM) to determine the link qualities to the direct neighbors and spreading these link quality information through the whole mesh. This procedure is summarized on the BATMAN concept page and explained in details in the RFC draft published in 2008. This approach was chosen for its simplicity during the protocol design phase and the implementation. However, it also bears some drawbacks: * Wireless interfaces usually come with some packet loss, therefore a higher broadcast rate is desirable to allow a fast reaction on flaky connections. Other interfaces of the same host might be connected to Ethernet LANs / VPNs / etc which rarely exhibit packet loss would benefit from a lower broadcast rate to reduce overhead. * It generally is more desirable to detect local link quality changes at a faster rate than propagating all these changes through the entire mesh (the far end of the mesh does not need to care about local link quality changes that much). Other optimizations strategies, like reducing overhead, might be possible if OGMs weren't used for all tasks in the mesh at the same time. As a result detecting local link qualities shall be handled by an independent message type, ELP, whereas the OGM message type remains responsible for flooding the mesh with these link quality information and determining the overall path transmit qualities. Developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-01-16 16:40:09 +08:00
/* Copyright (C) 2011-2016 B.A.T.M.A.N. contributors:
*
* Linus Lüssing, Marek Lindner
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of version 2 of the GNU General Public
* License as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#include "bat_v_elp.h"
#include "main.h"
#include <linux/atomic.h>
#include <linux/byteorder/generic.h>
#include <linux/errno.h>
#include <linux/etherdevice.h>
batman-adv: ELP - compute the metric based on the estimated throughput In case of wireless interface retrieve the throughput by querying cfg80211. To perform this call a separate work must be scheduled because the function may sleep and this is not allowed within an RCU protected context (RCU in this case is used to iterate over all the neighbours). Use ethtool to retrieve information about an Ethernet link like HALF/FULL_DUPLEX and advertised bandwidth (e.g. 100/10Mbps). The metric is updated each time a new ELP packet is sent, this way it is possible to timely react to a metric variation which can imply (for example) a neighbour disconnection. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-11-11 01:50:51 +08:00
#include <linux/ethtool.h>
batman-adv: ELP - adding basic infrastructure The B.A.T.M.A.N. protocol originally only used a single message type (called OGM) to determine the link qualities to the direct neighbors and spreading these link quality information through the whole mesh. This procedure is summarized on the BATMAN concept page and explained in details in the RFC draft published in 2008. This approach was chosen for its simplicity during the protocol design phase and the implementation. However, it also bears some drawbacks: * Wireless interfaces usually come with some packet loss, therefore a higher broadcast rate is desirable to allow a fast reaction on flaky connections. Other interfaces of the same host might be connected to Ethernet LANs / VPNs / etc which rarely exhibit packet loss would benefit from a lower broadcast rate to reduce overhead. * It generally is more desirable to detect local link quality changes at a faster rate than propagating all these changes through the entire mesh (the far end of the mesh does not need to care about local link quality changes that much). Other optimizations strategies, like reducing overhead, might be possible if OGMs weren't used for all tasks in the mesh at the same time. As a result detecting local link qualities shall be handled by an independent message type, ELP, whereas the OGM message type remains responsible for flooding the mesh with these link quality information and determining the overall path transmit qualities. Developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-01-16 16:40:09 +08:00
#include <linux/fs.h>
#include <linux/if_ether.h>
#include <linux/jiffies.h>
#include <linux/kernel.h>
batman-adv: ELP - compute the metric based on the estimated throughput In case of wireless interface retrieve the throughput by querying cfg80211. To perform this call a separate work must be scheduled because the function may sleep and this is not allowed within an RCU protected context (RCU in this case is used to iterate over all the neighbours). Use ethtool to retrieve information about an Ethernet link like HALF/FULL_DUPLEX and advertised bandwidth (e.g. 100/10Mbps). The metric is updated each time a new ELP packet is sent, this way it is possible to timely react to a metric variation which can imply (for example) a neighbour disconnection. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-11-11 01:50:51 +08:00
#include <linux/kref.h>
batman-adv: ELP - adding basic infrastructure The B.A.T.M.A.N. protocol originally only used a single message type (called OGM) to determine the link qualities to the direct neighbors and spreading these link quality information through the whole mesh. This procedure is summarized on the BATMAN concept page and explained in details in the RFC draft published in 2008. This approach was chosen for its simplicity during the protocol design phase and the implementation. However, it also bears some drawbacks: * Wireless interfaces usually come with some packet loss, therefore a higher broadcast rate is desirable to allow a fast reaction on flaky connections. Other interfaces of the same host might be connected to Ethernet LANs / VPNs / etc which rarely exhibit packet loss would benefit from a lower broadcast rate to reduce overhead. * It generally is more desirable to detect local link quality changes at a faster rate than propagating all these changes through the entire mesh (the far end of the mesh does not need to care about local link quality changes that much). Other optimizations strategies, like reducing overhead, might be possible if OGMs weren't used for all tasks in the mesh at the same time. As a result detecting local link qualities shall be handled by an independent message type, ELP, whereas the OGM message type remains responsible for flooding the mesh with these link quality information and determining the overall path transmit qualities. Developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-01-16 16:40:09 +08:00
#include <linux/netdevice.h>
#include <linux/random.h>
#include <linux/rculist.h>
#include <linux/rcupdate.h>
batman-adv: ELP - compute the metric based on the estimated throughput In case of wireless interface retrieve the throughput by querying cfg80211. To perform this call a separate work must be scheduled because the function may sleep and this is not allowed within an RCU protected context (RCU in this case is used to iterate over all the neighbours). Use ethtool to retrieve information about an Ethernet link like HALF/FULL_DUPLEX and advertised bandwidth (e.g. 100/10Mbps). The metric is updated each time a new ELP packet is sent, this way it is possible to timely react to a metric variation which can imply (for example) a neighbour disconnection. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-11-11 01:50:51 +08:00
#include <linux/rtnetlink.h>
batman-adv: ELP - adding basic infrastructure The B.A.T.M.A.N. protocol originally only used a single message type (called OGM) to determine the link qualities to the direct neighbors and spreading these link quality information through the whole mesh. This procedure is summarized on the BATMAN concept page and explained in details in the RFC draft published in 2008. This approach was chosen for its simplicity during the protocol design phase and the implementation. However, it also bears some drawbacks: * Wireless interfaces usually come with some packet loss, therefore a higher broadcast rate is desirable to allow a fast reaction on flaky connections. Other interfaces of the same host might be connected to Ethernet LANs / VPNs / etc which rarely exhibit packet loss would benefit from a lower broadcast rate to reduce overhead. * It generally is more desirable to detect local link quality changes at a faster rate than propagating all these changes through the entire mesh (the far end of the mesh does not need to care about local link quality changes that much). Other optimizations strategies, like reducing overhead, might be possible if OGMs weren't used for all tasks in the mesh at the same time. As a result detecting local link qualities shall be handled by an independent message type, ELP, whereas the OGM message type remains responsible for flooding the mesh with these link quality information and determining the overall path transmit qualities. Developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-01-16 16:40:09 +08:00
#include <linux/skbuff.h>
#include <linux/stddef.h>
#include <linux/string.h>
#include <linux/types.h>
#include <linux/workqueue.h>
batman-adv: ELP - compute the metric based on the estimated throughput In case of wireless interface retrieve the throughput by querying cfg80211. To perform this call a separate work must be scheduled because the function may sleep and this is not allowed within an RCU protected context (RCU in this case is used to iterate over all the neighbours). Use ethtool to retrieve information about an Ethernet link like HALF/FULL_DUPLEX and advertised bandwidth (e.g. 100/10Mbps). The metric is updated each time a new ELP packet is sent, this way it is possible to timely react to a metric variation which can imply (for example) a neighbour disconnection. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-11-11 01:50:51 +08:00
#include <net/cfg80211.h>
batman-adv: ELP - adding basic infrastructure The B.A.T.M.A.N. protocol originally only used a single message type (called OGM) to determine the link qualities to the direct neighbors and spreading these link quality information through the whole mesh. This procedure is summarized on the BATMAN concept page and explained in details in the RFC draft published in 2008. This approach was chosen for its simplicity during the protocol design phase and the implementation. However, it also bears some drawbacks: * Wireless interfaces usually come with some packet loss, therefore a higher broadcast rate is desirable to allow a fast reaction on flaky connections. Other interfaces of the same host might be connected to Ethernet LANs / VPNs / etc which rarely exhibit packet loss would benefit from a lower broadcast rate to reduce overhead. * It generally is more desirable to detect local link quality changes at a faster rate than propagating all these changes through the entire mesh (the far end of the mesh does not need to care about local link quality changes that much). Other optimizations strategies, like reducing overhead, might be possible if OGMs weren't used for all tasks in the mesh at the same time. As a result detecting local link qualities shall be handled by an independent message type, ELP, whereas the OGM message type remains responsible for flooding the mesh with these link quality information and determining the overall path transmit qualities. Developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-01-16 16:40:09 +08:00
#include "bat_algo.h"
batman-adv: OGMv2 - implement originators logic Add the support for recognising new originators in the network and rebroadcast their OGMs. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-01-16 16:40:13 +08:00
#include "bat_v_ogm.h"
batman-adv: ELP - adding basic infrastructure The B.A.T.M.A.N. protocol originally only used a single message type (called OGM) to determine the link qualities to the direct neighbors and spreading these link quality information through the whole mesh. This procedure is summarized on the BATMAN concept page and explained in details in the RFC draft published in 2008. This approach was chosen for its simplicity during the protocol design phase and the implementation. However, it also bears some drawbacks: * Wireless interfaces usually come with some packet loss, therefore a higher broadcast rate is desirable to allow a fast reaction on flaky connections. Other interfaces of the same host might be connected to Ethernet LANs / VPNs / etc which rarely exhibit packet loss would benefit from a lower broadcast rate to reduce overhead. * It generally is more desirable to detect local link quality changes at a faster rate than propagating all these changes through the entire mesh (the far end of the mesh does not need to care about local link quality changes that much). Other optimizations strategies, like reducing overhead, might be possible if OGMs weren't used for all tasks in the mesh at the same time. As a result detecting local link qualities shall be handled by an independent message type, ELP, whereas the OGM message type remains responsible for flooding the mesh with these link quality information and determining the overall path transmit qualities. Developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-01-16 16:40:09 +08:00
#include "hard-interface.h"
batman-adv: Consolidate logging related functions There are several places in batman-adv which provide logging related functions. These should be grouped together in the log.* files to make them easier to find. Reported-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-05-16 05:48:31 +08:00
#include "log.h"
batman-adv: ELP - creating neighbor structures Initially developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-01-16 16:40:10 +08:00
#include "originator.h"
batman-adv: ELP - adding basic infrastructure The B.A.T.M.A.N. protocol originally only used a single message type (called OGM) to determine the link qualities to the direct neighbors and spreading these link quality information through the whole mesh. This procedure is summarized on the BATMAN concept page and explained in details in the RFC draft published in 2008. This approach was chosen for its simplicity during the protocol design phase and the implementation. However, it also bears some drawbacks: * Wireless interfaces usually come with some packet loss, therefore a higher broadcast rate is desirable to allow a fast reaction on flaky connections. Other interfaces of the same host might be connected to Ethernet LANs / VPNs / etc which rarely exhibit packet loss would benefit from a lower broadcast rate to reduce overhead. * It generally is more desirable to detect local link quality changes at a faster rate than propagating all these changes through the entire mesh (the far end of the mesh does not need to care about local link quality changes that much). Other optimizations strategies, like reducing overhead, might be possible if OGMs weren't used for all tasks in the mesh at the same time. As a result detecting local link qualities shall be handled by an independent message type, ELP, whereas the OGM message type remains responsible for flooding the mesh with these link quality information and determining the overall path transmit qualities. Developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-01-16 16:40:09 +08:00
#include "packet.h"
batman-adv: ELP - creating neighbor structures Initially developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-01-16 16:40:10 +08:00
#include "routing.h"
batman-adv: ELP - adding basic infrastructure The B.A.T.M.A.N. protocol originally only used a single message type (called OGM) to determine the link qualities to the direct neighbors and spreading these link quality information through the whole mesh. This procedure is summarized on the BATMAN concept page and explained in details in the RFC draft published in 2008. This approach was chosen for its simplicity during the protocol design phase and the implementation. However, it also bears some drawbacks: * Wireless interfaces usually come with some packet loss, therefore a higher broadcast rate is desirable to allow a fast reaction on flaky connections. Other interfaces of the same host might be connected to Ethernet LANs / VPNs / etc which rarely exhibit packet loss would benefit from a lower broadcast rate to reduce overhead. * It generally is more desirable to detect local link quality changes at a faster rate than propagating all these changes through the entire mesh (the far end of the mesh does not need to care about local link quality changes that much). Other optimizations strategies, like reducing overhead, might be possible if OGMs weren't used for all tasks in the mesh at the same time. As a result detecting local link qualities shall be handled by an independent message type, ELP, whereas the OGM message type remains responsible for flooding the mesh with these link quality information and determining the overall path transmit qualities. Developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-01-16 16:40:09 +08:00
#include "send.h"
/**
* batadv_v_elp_start_timer - restart timer for ELP periodic work
* @hard_iface: the interface for which the timer has to be reset
*/
static void batadv_v_elp_start_timer(struct batadv_hard_iface *hard_iface)
{
unsigned int msecs;
msecs = atomic_read(&hard_iface->bat_v.elp_interval) - BATADV_JITTER;
msecs += prandom_u32() % (2 * BATADV_JITTER);
queue_delayed_work(batadv_event_workqueue, &hard_iface->bat_v.elp_wq,
msecs_to_jiffies(msecs));
}
batman-adv: ELP - compute the metric based on the estimated throughput In case of wireless interface retrieve the throughput by querying cfg80211. To perform this call a separate work must be scheduled because the function may sleep and this is not allowed within an RCU protected context (RCU in this case is used to iterate over all the neighbours). Use ethtool to retrieve information about an Ethernet link like HALF/FULL_DUPLEX and advertised bandwidth (e.g. 100/10Mbps). The metric is updated each time a new ELP packet is sent, this way it is possible to timely react to a metric variation which can imply (for example) a neighbour disconnection. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-11-11 01:50:51 +08:00
/**
* batadv_v_elp_get_throughput - get the throughput towards a neighbour
* @neigh: the neighbour for which the throughput has to be obtained
*
* Return: The throughput towards the given neighbour in multiples of 100kpbs
* (a value of '1' equals to 0.1Mbps, '10' equals 1Mbps, etc).
*/
static u32 batadv_v_elp_get_throughput(struct batadv_hardif_neigh_node *neigh)
{
struct batadv_hard_iface *hard_iface = neigh->if_incoming;
struct ethtool_link_ksettings link_settings;
struct station_info sinfo;
u32 throughput;
int ret;
/* if the user specified a customised value for this interface, then
* return it directly
*/
throughput = atomic_read(&hard_iface->bat_v.throughput_override);
if (throughput != 0)
return throughput;
/* if this is a wireless device, then ask its throughput through
* cfg80211 API
*/
if (batadv_is_wifi_netdev(hard_iface->net_dev)) {
batman-adv: refactor wifi interface detection The ELP protocol requires cfg80211 to auto-detect the WiFi througput to a given neighbor. Use batadv_is_cfg80211_netdev() to determine whether or not an interface is eligible. Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-09-30 21:21:02 +08:00
if (!batadv_is_cfg80211_netdev(hard_iface->net_dev))
/* unsupported WiFi driver version */
goto default_throughput;
batman-adv: ELP - compute the metric based on the estimated throughput In case of wireless interface retrieve the throughput by querying cfg80211. To perform this call a separate work must be scheduled because the function may sleep and this is not allowed within an RCU protected context (RCU in this case is used to iterate over all the neighbours). Use ethtool to retrieve information about an Ethernet link like HALF/FULL_DUPLEX and advertised bandwidth (e.g. 100/10Mbps). The metric is updated each time a new ELP packet is sent, this way it is possible to timely react to a metric variation which can imply (for example) a neighbour disconnection. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-11-11 01:50:51 +08:00
batman-adv: refactor wifi interface detection The ELP protocol requires cfg80211 to auto-detect the WiFi througput to a given neighbor. Use batadv_is_cfg80211_netdev() to determine whether or not an interface is eligible. Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-09-30 21:21:02 +08:00
ret = cfg80211_get_station(hard_iface->net_dev,
neigh->addr, &sinfo);
if (ret == -ENOENT) {
/* Node is not associated anymore! It would be
* possible to delete this neighbor. For now set
* the throughput metric to 0.
*/
return 0;
}
if (!ret)
return sinfo.expected_throughput / 100;
batman-adv: ELP - compute the metric based on the estimated throughput In case of wireless interface retrieve the throughput by querying cfg80211. To perform this call a separate work must be scheduled because the function may sleep and this is not allowed within an RCU protected context (RCU in this case is used to iterate over all the neighbours). Use ethtool to retrieve information about an Ethernet link like HALF/FULL_DUPLEX and advertised bandwidth (e.g. 100/10Mbps). The metric is updated each time a new ELP packet is sent, this way it is possible to timely react to a metric variation which can imply (for example) a neighbour disconnection. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-11-11 01:50:51 +08:00
}
/* if not a wifi interface, check if this device provides data via
* ethtool (e.g. an Ethernet adapter)
*/
memset(&link_settings, 0, sizeof(link_settings));
rtnl_lock();
ret = __ethtool_get_link_ksettings(hard_iface->net_dev, &link_settings);
rtnl_unlock();
if (ret == 0) {
/* link characteristics might change over time */
if (link_settings.base.duplex == DUPLEX_FULL)
hard_iface->bat_v.flags |= BATADV_FULL_DUPLEX;
else
hard_iface->bat_v.flags &= ~BATADV_FULL_DUPLEX;
throughput = link_settings.base.speed;
if (throughput && (throughput != SPEED_UNKNOWN))
return throughput * 10;
}
default_throughput:
if (!(hard_iface->bat_v.flags & BATADV_WARNING_DEFAULT)) {
batadv_info(hard_iface->soft_iface,
"WiFi driver or ethtool info does not provide information about link speeds on interface %s, therefore defaulting to hardcoded throughput values of %u.%1u Mbps. Consider overriding the throughput manually or checking your driver.\n",
hard_iface->net_dev->name,
BATADV_THROUGHPUT_DEFAULT_VALUE / 10,
BATADV_THROUGHPUT_DEFAULT_VALUE % 10);
hard_iface->bat_v.flags |= BATADV_WARNING_DEFAULT;
}
/* if none of the above cases apply, return the base_throughput */
return BATADV_THROUGHPUT_DEFAULT_VALUE;
}
/**
* batadv_v_elp_throughput_metric_update - worker updating the throughput metric
* of a single hop neighbour
* @work: the work queue item
*/
void batadv_v_elp_throughput_metric_update(struct work_struct *work)
{
struct batadv_hardif_neigh_node_bat_v *neigh_bat_v;
struct batadv_hardif_neigh_node *neigh;
neigh_bat_v = container_of(work, struct batadv_hardif_neigh_node_bat_v,
metric_work);
neigh = container_of(neigh_bat_v, struct batadv_hardif_neigh_node,
bat_v);
ewma_throughput_add(&neigh->bat_v.throughput,
batadv_v_elp_get_throughput(neigh));
/* decrement refcounter to balance increment performed before scheduling
* this task
*/
batadv_hardif_neigh_put(neigh);
}
batman-adv: ELP - send unicast ELP packets for throughput sampling In case of an unused wireless link, the mac80211 throughput estimation won't get updated further. Consequently, the reported throughput metric will become obsolete. With this patch unicast sampling is introduced by periodically sending unicast ELP packets to each neighbor on idle WiFi links. These sampling packets will fill an entire frame, so that the measurement is as reliable as possible Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-11-11 01:51:22 +08:00
/**
* batadv_v_elp_wifi_neigh_probe - send link probing packets to a neighbour
* @neigh: the neighbour to probe
*
* Sends a predefined number of unicast wifi packets to a given neighbour in
* order to trigger the throughput estimation on this link by the RC algorithm.
* Packets are sent only if there there is not enough payload unicast traffic
* towards this neighbour..
*
* Return: True on success and false in case of error during skb preparation.
*/
static bool
batadv_v_elp_wifi_neigh_probe(struct batadv_hardif_neigh_node *neigh)
{
struct batadv_hard_iface *hard_iface = neigh->if_incoming;
struct batadv_priv *bat_priv = netdev_priv(hard_iface->soft_iface);
unsigned long last_tx_diff;
struct sk_buff *skb;
int probe_len, i;
int elp_skb_len;
/* this probing routine is for Wifi neighbours only */
if (!batadv_is_wifi_netdev(hard_iface->net_dev))
return true;
/* probe the neighbor only if no unicast packets have been sent
* to it in the last 100 milliseconds: this is the rate control
* algorithm sampling interval (minstrel). In this way, if not
* enough traffic has been sent to the neighbor, batman-adv can
* generate 2 probe packets and push the RC algorithm to perform
* the sampling
*/
last_tx_diff = jiffies_to_msecs(jiffies - neigh->bat_v.last_unicast_tx);
if (last_tx_diff <= BATADV_ELP_PROBE_MAX_TX_DIFF)
return true;
probe_len = max_t(int, sizeof(struct batadv_elp_packet),
BATADV_ELP_MIN_PROBE_SIZE);
for (i = 0; i < BATADV_ELP_PROBES_PER_NODE; i++) {
elp_skb_len = hard_iface->bat_v.elp_skb->len;
skb = skb_copy_expand(hard_iface->bat_v.elp_skb, 0,
probe_len - elp_skb_len,
GFP_ATOMIC);
if (!skb)
return false;
/* Tell the skb to get as big as the allocated space (we want
* the packet to be exactly of that size to make the link
* throughput estimation effective.
*/
skb_put(skb, probe_len - hard_iface->bat_v.elp_skb->len);
batadv_dbg(BATADV_DBG_BATMAN, bat_priv,
"Sending unicast (probe) ELP packet on interface %s to %pM\n",
hard_iface->net_dev->name, neigh->addr);
batadv_send_skb_packet(skb, hard_iface, neigh->addr);
}
return true;
}
batman-adv: ELP - adding basic infrastructure The B.A.T.M.A.N. protocol originally only used a single message type (called OGM) to determine the link qualities to the direct neighbors and spreading these link quality information through the whole mesh. This procedure is summarized on the BATMAN concept page and explained in details in the RFC draft published in 2008. This approach was chosen for its simplicity during the protocol design phase and the implementation. However, it also bears some drawbacks: * Wireless interfaces usually come with some packet loss, therefore a higher broadcast rate is desirable to allow a fast reaction on flaky connections. Other interfaces of the same host might be connected to Ethernet LANs / VPNs / etc which rarely exhibit packet loss would benefit from a lower broadcast rate to reduce overhead. * It generally is more desirable to detect local link quality changes at a faster rate than propagating all these changes through the entire mesh (the far end of the mesh does not need to care about local link quality changes that much). Other optimizations strategies, like reducing overhead, might be possible if OGMs weren't used for all tasks in the mesh at the same time. As a result detecting local link qualities shall be handled by an independent message type, ELP, whereas the OGM message type remains responsible for flooding the mesh with these link quality information and determining the overall path transmit qualities. Developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-01-16 16:40:09 +08:00
/**
* batadv_v_elp_periodic_work - ELP periodic task per interface
* @work: work queue item
*
* Emits broadcast ELP message in regular intervals.
*/
static void batadv_v_elp_periodic_work(struct work_struct *work)
{
batman-adv: ELP - compute the metric based on the estimated throughput In case of wireless interface retrieve the throughput by querying cfg80211. To perform this call a separate work must be scheduled because the function may sleep and this is not allowed within an RCU protected context (RCU in this case is used to iterate over all the neighbours). Use ethtool to retrieve information about an Ethernet link like HALF/FULL_DUPLEX and advertised bandwidth (e.g. 100/10Mbps). The metric is updated each time a new ELP packet is sent, this way it is possible to timely react to a metric variation which can imply (for example) a neighbour disconnection. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-11-11 01:50:51 +08:00
struct batadv_hardif_neigh_node *hardif_neigh;
batman-adv: ELP - adding basic infrastructure The B.A.T.M.A.N. protocol originally only used a single message type (called OGM) to determine the link qualities to the direct neighbors and spreading these link quality information through the whole mesh. This procedure is summarized on the BATMAN concept page and explained in details in the RFC draft published in 2008. This approach was chosen for its simplicity during the protocol design phase and the implementation. However, it also bears some drawbacks: * Wireless interfaces usually come with some packet loss, therefore a higher broadcast rate is desirable to allow a fast reaction on flaky connections. Other interfaces of the same host might be connected to Ethernet LANs / VPNs / etc which rarely exhibit packet loss would benefit from a lower broadcast rate to reduce overhead. * It generally is more desirable to detect local link quality changes at a faster rate than propagating all these changes through the entire mesh (the far end of the mesh does not need to care about local link quality changes that much). Other optimizations strategies, like reducing overhead, might be possible if OGMs weren't used for all tasks in the mesh at the same time. As a result detecting local link qualities shall be handled by an independent message type, ELP, whereas the OGM message type remains responsible for flooding the mesh with these link quality information and determining the overall path transmit qualities. Developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-01-16 16:40:09 +08:00
struct batadv_hard_iface *hard_iface;
struct batadv_hard_iface_bat_v *bat_v;
struct batadv_elp_packet *elp_packet;
struct batadv_priv *bat_priv;
struct sk_buff *skb;
u32 elp_interval;
bat_v = container_of(work, struct batadv_hard_iface_bat_v, elp_wq.work);
hard_iface = container_of(bat_v, struct batadv_hard_iface, bat_v);
bat_priv = netdev_priv(hard_iface->soft_iface);
if (atomic_read(&bat_priv->mesh_state) == BATADV_MESH_DEACTIVATING)
goto out;
/* we are in the process of shutting this interface down */
if ((hard_iface->if_status == BATADV_IF_NOT_IN_USE) ||
(hard_iface->if_status == BATADV_IF_TO_BE_REMOVED))
goto out;
/* the interface was enabled but may not be ready yet */
if (hard_iface->if_status != BATADV_IF_ACTIVE)
goto restart_timer;
skb = skb_copy(hard_iface->bat_v.elp_skb, GFP_ATOMIC);
if (!skb)
goto restart_timer;
elp_packet = (struct batadv_elp_packet *)skb->data;
elp_packet->seqno = htonl(atomic_read(&hard_iface->bat_v.elp_seqno));
elp_interval = atomic_read(&hard_iface->bat_v.elp_interval);
elp_packet->elp_interval = htonl(elp_interval);
batadv_dbg(BATADV_DBG_BATMAN, bat_priv,
"Sending broadcast ELP packet on interface %s, seqno %u\n",
hard_iface->net_dev->name,
atomic_read(&hard_iface->bat_v.elp_seqno));
batman-adv: keep track of when unicast packets are sent To enable ELP to send probing packets over wireless links only if needed, batman-adv must keep track of the last time it sent a unicast packet towards every neighbour. For this purpose a 2 main changes are introduced: 1) a new member of the elp_neigh_node structure stores the last time a unicast packet was sent towards this neighbour; 2) a wrapper function for sending unicast packets is implemented. This function will simply update the member describe din point 1) and then forward the packet to the real sending routine. Point 2) implies that any code-path leading to a unicast sending now has to use the new wrapper. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2016-01-16 16:40:15 +08:00
batadv_send_broadcast_skb(skb, hard_iface);
batman-adv: ELP - adding basic infrastructure The B.A.T.M.A.N. protocol originally only used a single message type (called OGM) to determine the link qualities to the direct neighbors and spreading these link quality information through the whole mesh. This procedure is summarized on the BATMAN concept page and explained in details in the RFC draft published in 2008. This approach was chosen for its simplicity during the protocol design phase and the implementation. However, it also bears some drawbacks: * Wireless interfaces usually come with some packet loss, therefore a higher broadcast rate is desirable to allow a fast reaction on flaky connections. Other interfaces of the same host might be connected to Ethernet LANs / VPNs / etc which rarely exhibit packet loss would benefit from a lower broadcast rate to reduce overhead. * It generally is more desirable to detect local link quality changes at a faster rate than propagating all these changes through the entire mesh (the far end of the mesh does not need to care about local link quality changes that much). Other optimizations strategies, like reducing overhead, might be possible if OGMs weren't used for all tasks in the mesh at the same time. As a result detecting local link qualities shall be handled by an independent message type, ELP, whereas the OGM message type remains responsible for flooding the mesh with these link quality information and determining the overall path transmit qualities. Developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-01-16 16:40:09 +08:00
atomic_inc(&hard_iface->bat_v.elp_seqno);
batman-adv: ELP - compute the metric based on the estimated throughput In case of wireless interface retrieve the throughput by querying cfg80211. To perform this call a separate work must be scheduled because the function may sleep and this is not allowed within an RCU protected context (RCU in this case is used to iterate over all the neighbours). Use ethtool to retrieve information about an Ethernet link like HALF/FULL_DUPLEX and advertised bandwidth (e.g. 100/10Mbps). The metric is updated each time a new ELP packet is sent, this way it is possible to timely react to a metric variation which can imply (for example) a neighbour disconnection. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-11-11 01:50:51 +08:00
/* The throughput metric is updated on each sent packet. This way, if a
* node is dead and no longer sends packets, batman-adv is still able to
* react timely to its death.
*
* The throughput metric is updated by following these steps:
* 1) if the hard_iface is wifi => send a number of unicast ELPs for
* probing/sampling to each neighbor
* 2) update the throughput metric value of each neighbor (note that the
* value retrieved in this step might be 100ms old because the
* probing packets at point 1) could still be in the HW queue)
*/
rcu_read_lock();
hlist_for_each_entry_rcu(hardif_neigh, &hard_iface->neigh_list, list) {
batman-adv: ELP - send unicast ELP packets for throughput sampling In case of an unused wireless link, the mac80211 throughput estimation won't get updated further. Consequently, the reported throughput metric will become obsolete. With this patch unicast sampling is introduced by periodically sending unicast ELP packets to each neighbor on idle WiFi links. These sampling packets will fill an entire frame, so that the measurement is as reliable as possible Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-11-11 01:51:22 +08:00
if (!batadv_v_elp_wifi_neigh_probe(hardif_neigh))
/* if something goes wrong while probing, better to stop
* sending packets immediately and reschedule the task
*/
break;
batman-adv: ELP - compute the metric based on the estimated throughput In case of wireless interface retrieve the throughput by querying cfg80211. To perform this call a separate work must be scheduled because the function may sleep and this is not allowed within an RCU protected context (RCU in this case is used to iterate over all the neighbours). Use ethtool to retrieve information about an Ethernet link like HALF/FULL_DUPLEX and advertised bandwidth (e.g. 100/10Mbps). The metric is updated each time a new ELP packet is sent, this way it is possible to timely react to a metric variation which can imply (for example) a neighbour disconnection. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-11-11 01:50:51 +08:00
if (!kref_get_unless_zero(&hardif_neigh->refcount))
continue;
/* Reading the estimated throughput from cfg80211 is a task that
* may sleep and that is not allowed in an rcu protected
* context. Therefore schedule a task for that.
*/
queue_work(batadv_event_workqueue,
&hardif_neigh->bat_v.metric_work);
}
rcu_read_unlock();
batman-adv: ELP - adding basic infrastructure The B.A.T.M.A.N. protocol originally only used a single message type (called OGM) to determine the link qualities to the direct neighbors and spreading these link quality information through the whole mesh. This procedure is summarized on the BATMAN concept page and explained in details in the RFC draft published in 2008. This approach was chosen for its simplicity during the protocol design phase and the implementation. However, it also bears some drawbacks: * Wireless interfaces usually come with some packet loss, therefore a higher broadcast rate is desirable to allow a fast reaction on flaky connections. Other interfaces of the same host might be connected to Ethernet LANs / VPNs / etc which rarely exhibit packet loss would benefit from a lower broadcast rate to reduce overhead. * It generally is more desirable to detect local link quality changes at a faster rate than propagating all these changes through the entire mesh (the far end of the mesh does not need to care about local link quality changes that much). Other optimizations strategies, like reducing overhead, might be possible if OGMs weren't used for all tasks in the mesh at the same time. As a result detecting local link qualities shall be handled by an independent message type, ELP, whereas the OGM message type remains responsible for flooding the mesh with these link quality information and determining the overall path transmit qualities. Developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-01-16 16:40:09 +08:00
restart_timer:
batadv_v_elp_start_timer(hard_iface);
out:
return;
}
/**
* batadv_v_elp_iface_enable - setup the ELP interface private resources
* @hard_iface: interface for which the data has to be prepared
*
* Return: 0 on success or a -ENOMEM in case of failure.
*/
int batadv_v_elp_iface_enable(struct batadv_hard_iface *hard_iface)
{
struct batadv_elp_packet *elp_packet;
unsigned char *elp_buff;
u32 random_seqno;
size_t size;
int res = -ENOMEM;
size = ETH_HLEN + NET_IP_ALIGN + BATADV_ELP_HLEN;
hard_iface->bat_v.elp_skb = dev_alloc_skb(size);
if (!hard_iface->bat_v.elp_skb)
goto out;
skb_reserve(hard_iface->bat_v.elp_skb, ETH_HLEN + NET_IP_ALIGN);
batman-adv: fix elp packet data reservation The skb_reserve() call only reserved headroom for the mac header, but not the elp packet header itself. Fixing this by using skb_put()'ing towards the skb tail instead of skb_push()'ing towards the skb head. Fixes: d6f94d91f766 ("batman-adv: ELP - adding basic infrastructure") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-08-23 09:13:03 +08:00
elp_buff = skb_put(hard_iface->bat_v.elp_skb, BATADV_ELP_HLEN);
batman-adv: ELP - adding basic infrastructure The B.A.T.M.A.N. protocol originally only used a single message type (called OGM) to determine the link qualities to the direct neighbors and spreading these link quality information through the whole mesh. This procedure is summarized on the BATMAN concept page and explained in details in the RFC draft published in 2008. This approach was chosen for its simplicity during the protocol design phase and the implementation. However, it also bears some drawbacks: * Wireless interfaces usually come with some packet loss, therefore a higher broadcast rate is desirable to allow a fast reaction on flaky connections. Other interfaces of the same host might be connected to Ethernet LANs / VPNs / etc which rarely exhibit packet loss would benefit from a lower broadcast rate to reduce overhead. * It generally is more desirable to detect local link quality changes at a faster rate than propagating all these changes through the entire mesh (the far end of the mesh does not need to care about local link quality changes that much). Other optimizations strategies, like reducing overhead, might be possible if OGMs weren't used for all tasks in the mesh at the same time. As a result detecting local link qualities shall be handled by an independent message type, ELP, whereas the OGM message type remains responsible for flooding the mesh with these link quality information and determining the overall path transmit qualities. Developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-01-16 16:40:09 +08:00
elp_packet = (struct batadv_elp_packet *)elp_buff;
memset(elp_packet, 0, BATADV_ELP_HLEN);
elp_packet->packet_type = BATADV_ELP;
elp_packet->version = BATADV_COMPAT_VERSION;
/* randomize initial seqno to avoid collision */
get_random_bytes(&random_seqno, sizeof(random_seqno));
atomic_set(&hard_iface->bat_v.elp_seqno, random_seqno);
batman-adv: ELP - compute the metric based on the estimated throughput In case of wireless interface retrieve the throughput by querying cfg80211. To perform this call a separate work must be scheduled because the function may sleep and this is not allowed within an RCU protected context (RCU in this case is used to iterate over all the neighbours). Use ethtool to retrieve information about an Ethernet link like HALF/FULL_DUPLEX and advertised bandwidth (e.g. 100/10Mbps). The metric is updated each time a new ELP packet is sent, this way it is possible to timely react to a metric variation which can imply (for example) a neighbour disconnection. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
2015-11-11 01:50:51 +08:00
/* assume full-duplex by default */
hard_iface->bat_v.flags |= BATADV_FULL_DUPLEX;
/* warn the user (again) if there is no throughput data is available */
hard_iface->bat_v.flags &= ~BATADV_WARNING_DEFAULT;
if (batadv_is_wifi_netdev(hard_iface->net_dev))
hard_iface->bat_v.flags &= ~BATADV_FULL_DUPLEX;
batman-adv: ELP - adding basic infrastructure The B.A.T.M.A.N. protocol originally only used a single message type (called OGM) to determine the link qualities to the direct neighbors and spreading these link quality information through the whole mesh. This procedure is summarized on the BATMAN concept page and explained in details in the RFC draft published in 2008. This approach was chosen for its simplicity during the protocol design phase and the implementation. However, it also bears some drawbacks: * Wireless interfaces usually come with some packet loss, therefore a higher broadcast rate is desirable to allow a fast reaction on flaky connections. Other interfaces of the same host might be connected to Ethernet LANs / VPNs / etc which rarely exhibit packet loss would benefit from a lower broadcast rate to reduce overhead. * It generally is more desirable to detect local link quality changes at a faster rate than propagating all these changes through the entire mesh (the far end of the mesh does not need to care about local link quality changes that much). Other optimizations strategies, like reducing overhead, might be possible if OGMs weren't used for all tasks in the mesh at the same time. As a result detecting local link qualities shall be handled by an independent message type, ELP, whereas the OGM message type remains responsible for flooding the mesh with these link quality information and determining the overall path transmit qualities. Developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-01-16 16:40:09 +08:00
INIT_DELAYED_WORK(&hard_iface->bat_v.elp_wq,
batadv_v_elp_periodic_work);
batadv_v_elp_start_timer(hard_iface);
res = 0;
out:
return res;
}
/**
* batadv_v_elp_iface_disable - release ELP interface private resources
* @hard_iface: interface for which the resources have to be released
*/
void batadv_v_elp_iface_disable(struct batadv_hard_iface *hard_iface)
{
cancel_delayed_work_sync(&hard_iface->bat_v.elp_wq);
dev_kfree_skb(hard_iface->bat_v.elp_skb);
hard_iface->bat_v.elp_skb = NULL;
}
batman-adv: initialize ELP orig address on secondary interfaces This fix prevents nodes to wrongly create a 00:00:00:00:00:00 originator which can potentially interfere with the rest of the neighbor statistics. Fixes: d6f94d91f766 ("batman-adv: ELP - adding basic infrastructure") Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-07 19:54:17 +08:00
/**
* batadv_v_elp_iface_activate - update the ELP buffer belonging to the given
* hard-interface
* @primary_iface: the new primary interface
* @hard_iface: interface holding the to-be-updated buffer
*/
void batadv_v_elp_iface_activate(struct batadv_hard_iface *primary_iface,
struct batadv_hard_iface *hard_iface)
{
struct batadv_elp_packet *elp_packet;
struct sk_buff *skb;
if (!hard_iface->bat_v.elp_skb)
return;
skb = hard_iface->bat_v.elp_skb;
elp_packet = (struct batadv_elp_packet *)skb->data;
ether_addr_copy(elp_packet->orig,
primary_iface->net_dev->dev_addr);
}
batman-adv: ELP - adding basic infrastructure The B.A.T.M.A.N. protocol originally only used a single message type (called OGM) to determine the link qualities to the direct neighbors and spreading these link quality information through the whole mesh. This procedure is summarized on the BATMAN concept page and explained in details in the RFC draft published in 2008. This approach was chosen for its simplicity during the protocol design phase and the implementation. However, it also bears some drawbacks: * Wireless interfaces usually come with some packet loss, therefore a higher broadcast rate is desirable to allow a fast reaction on flaky connections. Other interfaces of the same host might be connected to Ethernet LANs / VPNs / etc which rarely exhibit packet loss would benefit from a lower broadcast rate to reduce overhead. * It generally is more desirable to detect local link quality changes at a faster rate than propagating all these changes through the entire mesh (the far end of the mesh does not need to care about local link quality changes that much). Other optimizations strategies, like reducing overhead, might be possible if OGMs weren't used for all tasks in the mesh at the same time. As a result detecting local link qualities shall be handled by an independent message type, ELP, whereas the OGM message type remains responsible for flooding the mesh with these link quality information and determining the overall path transmit qualities. Developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-01-16 16:40:09 +08:00
/**
* batadv_v_elp_primary_iface_set - change internal data to reflect the new
* primary interface
* @primary_iface: the new primary interface
*/
void batadv_v_elp_primary_iface_set(struct batadv_hard_iface *primary_iface)
{
struct batadv_hard_iface *hard_iface;
/* update orig field of every elp iface belonging to this mesh */
rcu_read_lock();
list_for_each_entry_rcu(hard_iface, &batadv_hardif_list, list) {
if (primary_iface->soft_iface != hard_iface->soft_iface)
continue;
batman-adv: initialize ELP orig address on secondary interfaces This fix prevents nodes to wrongly create a 00:00:00:00:00:00 originator which can potentially interfere with the rest of the neighbor statistics. Fixes: d6f94d91f766 ("batman-adv: ELP - adding basic infrastructure") Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <a@unstable.cc>
2016-05-07 19:54:17 +08:00
batadv_v_elp_iface_activate(primary_iface, hard_iface);
batman-adv: ELP - adding basic infrastructure The B.A.T.M.A.N. protocol originally only used a single message type (called OGM) to determine the link qualities to the direct neighbors and spreading these link quality information through the whole mesh. This procedure is summarized on the BATMAN concept page and explained in details in the RFC draft published in 2008. This approach was chosen for its simplicity during the protocol design phase and the implementation. However, it also bears some drawbacks: * Wireless interfaces usually come with some packet loss, therefore a higher broadcast rate is desirable to allow a fast reaction on flaky connections. Other interfaces of the same host might be connected to Ethernet LANs / VPNs / etc which rarely exhibit packet loss would benefit from a lower broadcast rate to reduce overhead. * It generally is more desirable to detect local link quality changes at a faster rate than propagating all these changes through the entire mesh (the far end of the mesh does not need to care about local link quality changes that much). Other optimizations strategies, like reducing overhead, might be possible if OGMs weren't used for all tasks in the mesh at the same time. As a result detecting local link qualities shall be handled by an independent message type, ELP, whereas the OGM message type remains responsible for flooding the mesh with these link quality information and determining the overall path transmit qualities. Developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-01-16 16:40:09 +08:00
}
rcu_read_unlock();
}
batman-adv: ELP - creating neighbor structures Initially developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-01-16 16:40:10 +08:00
/**
* batadv_v_elp_neigh_update - update an ELP neighbour node
* @bat_priv: the bat priv with all the soft interface information
* @neigh_addr: the neighbour interface address
* @if_incoming: the interface the packet was received through
* @elp_packet: the received ELP packet
*
* Updates the ELP neighbour node state with the data received within the new
* ELP packet.
*/
static void batadv_v_elp_neigh_update(struct batadv_priv *bat_priv,
u8 *neigh_addr,
struct batadv_hard_iface *if_incoming,
struct batadv_elp_packet *elp_packet)
{
struct batadv_neigh_node *neigh;
struct batadv_orig_node *orig_neigh;
struct batadv_hardif_neigh_node *hardif_neigh;
s32 seqno_diff;
s32 elp_latest_seqno;
orig_neigh = batadv_v_ogm_orig_get(bat_priv, elp_packet->orig);
if (!orig_neigh)
return;
batman-adv: refactor batadv_neigh_node_* functions to follow common style Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-05-03 01:52:08 +08:00
neigh = batadv_neigh_node_get_or_create(orig_neigh,
if_incoming, neigh_addr);
batman-adv: ELP - creating neighbor structures Initially developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-01-16 16:40:10 +08:00
if (!neigh)
goto orig_free;
hardif_neigh = batadv_hardif_neigh_get(if_incoming, neigh_addr);
if (!hardif_neigh)
goto neigh_free;
elp_latest_seqno = hardif_neigh->bat_v.elp_latest_seqno;
seqno_diff = ntohl(elp_packet->seqno) - elp_latest_seqno;
/* known or older sequence numbers are ignored. However always adopt
* if the router seems to have been restarted.
*/
if (seqno_diff < 1 && seqno_diff > -BATADV_ELP_MAX_AGE)
goto hardif_free;
neigh->last_seen = jiffies;
hardif_neigh->last_seen = jiffies;
hardif_neigh->bat_v.elp_latest_seqno = ntohl(elp_packet->seqno);
hardif_neigh->bat_v.elp_interval = ntohl(elp_packet->elp_interval);
hardif_free:
if (hardif_neigh)
batadv_hardif_neigh_put(hardif_neigh);
neigh_free:
if (neigh)
batadv_neigh_node_put(neigh);
orig_free:
if (orig_neigh)
batadv_orig_node_put(orig_neigh);
}
/**
* batadv_v_elp_packet_recv - main ELP packet handler
* @skb: the received packet
* @if_incoming: the interface this packet was received through
*
* Return: NET_RX_SUCCESS and consumes the skb if the packet was peoperly
* processed or NET_RX_DROP in case of failure.
*/
int batadv_v_elp_packet_recv(struct sk_buff *skb,
struct batadv_hard_iface *if_incoming)
{
struct batadv_priv *bat_priv = netdev_priv(if_incoming->soft_iface);
struct batadv_elp_packet *elp_packet;
struct batadv_hard_iface *primary_if;
struct ethhdr *ethhdr = (struct ethhdr *)skb_mac_header(skb);
batman-adv: Consume skb in receive handlers Receiving functions in Linux consume the supplied skbuff. Doing the same in the batadv_rx_handler functions makes the behavior more similar to the rest of the Linux network code. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-07-18 03:04:04 +08:00
bool res;
int ret = NET_RX_DROP;
batman-adv: ELP - creating neighbor structures Initially developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-01-16 16:40:10 +08:00
batman-adv: Consume skb in receive handlers Receiving functions in Linux consume the supplied skbuff. Doing the same in the batadv_rx_handler functions makes the behavior more similar to the rest of the Linux network code. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-07-18 03:04:04 +08:00
res = batadv_check_management_packet(skb, if_incoming, BATADV_ELP_HLEN);
if (!res)
goto free_skb;
batman-adv: ELP - creating neighbor structures Initially developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-01-16 16:40:10 +08:00
if (batadv_is_my_mac(bat_priv, ethhdr->h_source))
batman-adv: Consume skb in receive handlers Receiving functions in Linux consume the supplied skbuff. Doing the same in the batadv_rx_handler functions makes the behavior more similar to the rest of the Linux network code. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-07-18 03:04:04 +08:00
goto free_skb;
batman-adv: ELP - creating neighbor structures Initially developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-01-16 16:40:10 +08:00
/* did we receive a B.A.T.M.A.N. V ELP packet on an interface
* that does not have B.A.T.M.A.N. V ELP enabled ?
*/
batman-adv: split routing API data structure in subobjects The routing API data structure contains several function pointers that can easily be grouped together based on the component they work with. Split the API in subobjects in order to improve definition readability. At the same time, remove the "bat_" prefix from the API object and its fields names. These are batman-adv private structs and there is no need to always prepend such prefix, which only makes function invocations much much longer. Signed-off-by: Antonio Quartulli <a@unstable.cc> Reviewed-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-05-25 23:27:31 +08:00
if (strcmp(bat_priv->algo_ops->name, "BATMAN_V") != 0)
batman-adv: Consume skb in receive handlers Receiving functions in Linux consume the supplied skbuff. Doing the same in the batadv_rx_handler functions makes the behavior more similar to the rest of the Linux network code. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-07-18 03:04:04 +08:00
goto free_skb;
batman-adv: ELP - creating neighbor structures Initially developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-01-16 16:40:10 +08:00
elp_packet = (struct batadv_elp_packet *)skb->data;
batadv_dbg(BATADV_DBG_BATMAN, bat_priv,
"Received ELP packet from %pM seqno %u ORIG: %pM\n",
ethhdr->h_source, ntohl(elp_packet->seqno),
elp_packet->orig);
primary_if = batadv_primary_if_get_selected(bat_priv);
if (!primary_if)
batman-adv: Consume skb in receive handlers Receiving functions in Linux consume the supplied skbuff. Doing the same in the batadv_rx_handler functions makes the behavior more similar to the rest of the Linux network code. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-07-18 03:04:04 +08:00
goto free_skb;
batman-adv: ELP - creating neighbor structures Initially developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-01-16 16:40:10 +08:00
batadv_v_elp_neigh_update(bat_priv, ethhdr->h_source, if_incoming,
elp_packet);
batman-adv: Consume skb in receive handlers Receiving functions in Linux consume the supplied skbuff. Doing the same in the batadv_rx_handler functions makes the behavior more similar to the rest of the Linux network code. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2016-07-18 03:04:04 +08:00
ret = NET_RX_SUCCESS;
batadv_hardif_put(primary_if);
free_skb:
if (ret == NET_RX_SUCCESS)
consume_skb(skb);
else
kfree_skb(skb);
return ret;
batman-adv: ELP - creating neighbor structures Initially developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <linus.luessing@web.de> Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by: Antonio Quartulli <antonio@open-mesh.com>
2016-01-16 16:40:10 +08:00
}