UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/arch/tile/configs/tilepro_defconfig

529 lines
12 KiB
Plaintext
Raw Normal View History

arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
CONFIG_SYSVIPC=y
arch/tile: sync up the defconfig files to the tip This was inspired by mchehab@redhat.com's observation that we didn't have EDAC configured on by default in both files. In addition, we were setting INITRAMFS_SOURCE to a non-empty string, which isn't a very common default and required editing to do test builds. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-13 03:22:52 +08:00
CONFIG_POSIX_MQUEUE=y
tile: refresh tile defconfig files These are based on the current shipping versions of the config files from Tilera, as synced up to the tip, so are a better starting point for folks who want a default configuration. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-06 20:58:35 +08:00
CONFIG_AUDIT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
arch/tile: sync up the defconfig files to the tip This was inspired by mchehab@redhat.com's observation that we didn't have EDAC configured on by default in both files. In addition, we were setting INITRAMFS_SOURCE to a non-empty string, which isn't a very common default and required editing to do test builds. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-13 03:22:52 +08:00
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_LOG_BUF_SHIFT=19
CONFIG_CGROUPS=y
CONFIG_CGROUP_DEBUG=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_BLK_CGROUP=y
CONFIG_NAMESPACES=y
CONFIG_RELAY=y
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
CONFIG_BLK_DEV_INITRD=y
tile: refresh tile defconfig files These are based on the current shipping versions of the config files from Tilera, as synced up to the tip, so are a better starting point for folks who want a default configuration. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-06 20:58:35 +08:00
CONFIG_RD_XZ=y
arch/tile: update defconfig file to something more useful Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-05-04 04:47:22 +08:00
CONFIG_SYSCTL_SYSCALL=y
CONFIG_EMBEDDED=y
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
# CONFIG_COMPAT_BRK is not set
CONFIG_PROFILING=y
CONFIG_MODULES=y
arch/tile: sync up the defconfig files to the tip This was inspired by mchehab@redhat.com's observation that we didn't have EDAC configured on by default in both files. In addition, we were setting INITRAMFS_SOURCE to a non-empty string, which isn't a very common default and required editing to do test builds. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-13 03:22:52 +08:00
CONFIG_MODULE_FORCE_LOAD=y
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
CONFIG_MODULE_UNLOAD=y
arch/tile: sync up the defconfig files to the tip This was inspired by mchehab@redhat.com's observation that we didn't have EDAC configured on by default in both files. In addition, we were setting INITRAMFS_SOURCE to a non-empty string, which isn't a very common default and required editing to do test builds. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-13 03:22:52 +08:00
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_SGI_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_CFQ_GROUP_IOSCHED=y
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
CONFIG_HZ_100=y
tile: refresh tile defconfig files These are based on the current shipping versions of the config files from Tilera, as synced up to the tip, so are a better starting point for folks who want a default configuration. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-06 20:58:35 +08:00
# CONFIG_COMPACTION is not set
CONFIG_PREEMPT_VOLUNTARY=y
arch/tile: sync up the defconfig files to the tip This was inspired by mchehab@redhat.com's observation that we didn't have EDAC configured on by default in both files. In addition, we were setting INITRAMFS_SOURCE to a non-empty string, which isn't a very common default and required editing to do test builds. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-13 03:22:52 +08:00
CONFIG_PCI_DEBUG=y
arch/tile: update defconfig file to something more useful Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-05-04 04:47:22 +08:00
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
arch/tile: sync up the defconfig files to the tip This was inspired by mchehab@redhat.com's observation that we didn't have EDAC configured on by default in both files. In addition, we were setting INITRAMFS_SOURCE to a non-empty string, which isn't a very common default and required editing to do test builds. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-13 03:22:52 +08:00
CONFIG_BINFMT_MISC=y
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
arch/tile: sync up the defconfig files to the tip This was inspired by mchehab@redhat.com's observation that we didn't have EDAC configured on by default in both files. In addition, we were setting INITRAMFS_SOURCE to a non-empty string, which isn't a very common default and required editing to do test builds. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-13 03:22:52 +08:00
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_STATISTICS=y
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
arch/tile: sync up the defconfig files to the tip This was inspired by mchehab@redhat.com's observation that we didn't have EDAC configured on by default in both files. In addition, we were setting INITRAMFS_SOURCE to a non-empty string, which isn't a very common default and required editing to do test builds. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-13 03:22:52 +08:00
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_NET_IPIP=m
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
CONFIG_TCP_MD5SIG=y
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
CONFIG_IPV6=y
arch/tile: sync up the defconfig files to the tip This was inspired by mchehab@redhat.com's observation that we didn't have EDAC configured on by default in both files. In addition, we were setting INITRAMFS_SOURCE to a non-empty string, which isn't a very common default and required editing to do test builds. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-13 03:22:52 +08:00
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_PIMSM_V2=y
CONFIG_NETLABEL=y
CONFIG_NETFILTER=y
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_ZONES=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_DCCP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
tile: refresh tile defconfig files These are based on the current shipping versions of the config files from Tilera, as synced up to the tip, so are a better starting point for folks who want a default configuration. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-06 20:58:35 +08:00
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
arch/tile: sync up the defconfig files to the tip This was inspired by mchehab@redhat.com's observation that we didn't have EDAC configured on by default in both files. In addition, we were setting INITRAMFS_SOURCE to a non-empty string, which isn't a very common default and required editing to do test builds. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-13 03:22:52 +08:00
CONFIG_NETFILTER_XT_TARGET_TEE=m
CONFIG_NETFILTER_XT_TARGET_TPROXY=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_IPVS=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
CONFIG_NETFILTER_XT_MATCH_SOCKET=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_IP_VS=m
CONFIG_IP_VS_IPV6=y
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
CONFIG_IP_VS_PROTO_SCTP=y
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
CONFIG_NF_CONNTRACK_IPV4=m
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_IP6=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
CONFIG_BRIDGE_EBT_NFLOG=m
CONFIG_RDS=m
CONFIG_RDS_TCP=m
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_PHONET=m
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=y
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_CLS_IND=y
CONFIG_DCB=y
tile: refresh tile defconfig files These are based on the current shipping versions of the config files from Tilera, as synced up to the tip, so are a better starting point for folks who want a default configuration. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-06 20:58:35 +08:00
CONFIG_DNS_RESOLVER=y
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
# CONFIG_WIRELESS is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
arch/tile: sync up the defconfig files to the tip This was inspired by mchehab@redhat.com's observation that we didn't have EDAC configured on by default in both files. In addition, we were setting INITRAMFS_SOURCE to a non-empty string, which isn't a very common default and required editing to do test builds. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-13 03:22:52 +08:00
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_CONNECTOR=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_SX8=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_ATA_OVER_ETH=m
CONFIG_RAID_ATTRS=m
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
arch/tile: sync up the defconfig files to the tip This was inspired by mchehab@redhat.com's observation that we didn't have EDAC configured on by default in both files. In addition, we were setting INITRAMFS_SOURCE to a non-empty string, which isn't a very common default and required editing to do test builds. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-13 03:22:52 +08:00
CONFIG_ATA=y
CONFIG_SATA_SIL24=y
# CONFIG_ATA_SFF is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
CONFIG_DM_DEBUG=y
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_DELAY=m
CONFIG_DM_UEVENT=y
CONFIG_FUSION=y
CONFIG_FUSION_SAS=y
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
CONFIG_NETDEVICES=y
arch/tile: sync up the defconfig files to the tip This was inspired by mchehab@redhat.com's observation that we didn't have EDAC configured on by default in both files. In addition, we were setting INITRAMFS_SOURCE to a non-empty string, which isn't a very common default and required editing to do test builds. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-13 03:22:52 +08:00
CONFIG_BONDING=m
CONFIG_DUMMY=m
CONFIG_IFB=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
CONFIG_TUN=y
arch/tile: sync up the defconfig files to the tip This was inspired by mchehab@redhat.com's observation that we didn't have EDAC configured on by default in both files. In addition, we were setting INITRAMFS_SOURCE to a non-empty string, which isn't a very common default and required editing to do test builds. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-13 03:22:52 +08:00
CONFIG_VETH=m
CONFIG_NET_DSA_MV88E6060=y
net: dsa: mv88e6xxx: factorize the switch driver Now that all drivers support the same set of functions and the same setup code, drop every model-specific DSA switch driver and replace them with a common mv88e6xxx driver. This merges the info tables into one, removes the function exports, the model-specific files, and update the defconfigs. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-10 01:22:58 +08:00
CONFIG_NET_DSA_MV88E6XXX=y
arch/tile: sync up the defconfig files to the tip This was inspired by mchehab@redhat.com's observation that we didn't have EDAC configured on by default in both files. In addition, we were setting INITRAMFS_SOURCE to a non-empty string, which isn't a very common default and required editing to do test builds. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-13 03:22:52 +08:00
# CONFIG_NET_VENDOR_3COM is not set
tile: refresh tile defconfig files These are based on the current shipping versions of the config files from Tilera, as synced up to the tip, so are a better starting point for folks who want a default configuration. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-06 20:58:35 +08:00
CONFIG_E1000E=y
arch/tile: sync up the defconfig files to the tip This was inspired by mchehab@redhat.com's observation that we didn't have EDAC configured on by default in both files. In addition, we were setting INITRAMFS_SOURCE to a non-empty string, which isn't a very common default and required editing to do test builds. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-13 03:22:52 +08:00
# CONFIG_WLAN is not set
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_VT is not set
# CONFIG_LEGACY_PTYS is not set
arch/tile: sync up the defconfig files to the tip This was inspired by mchehab@redhat.com's observation that we didn't have EDAC configured on by default in both files. In addition, we were setting INITRAMFS_SOURCE to a non-empty string, which isn't a very common default and required editing to do test builds. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-13 03:22:52 +08:00
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_TIMERIOMEM=m
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
# CONFIG_HWMON is not set
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
arch/tile: sync up the defconfig files to the tip This was inspired by mchehab@redhat.com's observation that we didn't have EDAC configured on by default in both files. In addition, we were setting INITRAMFS_SOURCE to a non-empty string, which isn't a very common default and required editing to do test builds. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-13 03:22:52 +08:00
# CONFIG_VGA_ARB is not set
# CONFIG_USB_SUPPORT is not set
arch/tile: update defconfig file to something more useful Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-05-04 04:47:22 +08:00
CONFIG_EDAC=y
CONFIG_EDAC_MM_EDAC=y
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
CONFIG_RTC_CLASS=y
tile: add an RTC driver for the Tilera hypervisor This is a simple RTC driver that lets Tilera hardware boot up and set the clock correctly. Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-05-10 01:28:43 +08:00
CONFIG_RTC_DRV_TILE=y
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
CONFIG_EXT2_FS=y
arch/tile: sync up the defconfig files to the tip This was inspired by mchehab@redhat.com's observation that we didn't have EDAC configured on by default in both files. In addition, we were setting INITRAMFS_SOURCE to a non-empty string, which isn't a very common default and required editing to do test builds. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-13 03:22:52 +08:00
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
CONFIG_EXT3_FS=y
arch/tile: sync up the defconfig files to the tip This was inspired by mchehab@redhat.com's observation that we didn't have EDAC configured on by default in both files. In addition, we were setting INITRAMFS_SOURCE to a non-empty string, which isn't a very common default and required editing to do test builds. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-13 03:22:52 +08:00
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_BTRFS_FS=m
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
CONFIG_QFMT_V2=y
CONFIG_AUTOFS4_FS=m
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
CONFIG_FUSE_FS=y
arch/tile: sync up the defconfig files to the tip This was inspired by mchehab@redhat.com's observation that we didn't have EDAC configured on by default in both files. In addition, we were setting INITRAMFS_SOURCE to a non-empty string, which isn't a very common default and required editing to do test builds. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-13 03:22:52 +08:00
CONFIG_CUSE=m
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
CONFIG_CACHEFILES=m
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_MSDOS_FS=m
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
CONFIG_VFAT_FS=m
arch/tile: sync up the defconfig files to the tip This was inspired by mchehab@redhat.com's observation that we didn't have EDAC configured on by default in both files. In addition, we were setting INITRAMFS_SOURCE to a non-empty string, which isn't a very common default and required editing to do test builds. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-13 03:22:52 +08:00
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
CONFIG_PROC_KCORE=y
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
CONFIG_TMPFS=y
arch/tile: sync up the defconfig files to the tip This was inspired by mchehab@redhat.com's observation that we didn't have EDAC configured on by default in both files. In addition, we were setting INITRAMFS_SOURCE to a non-empty string, which isn't a very common default and required editing to do test builds. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-13 03:22:52 +08:00
CONFIG_TMPFS_POSIX_ACL=y
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
CONFIG_HUGETLBFS=y
tile: refresh tile defconfig files These are based on the current shipping versions of the config files from Tilera, as synced up to the tip, so are a better starting point for folks who want a default configuration. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-06 20:58:35 +08:00
CONFIG_CONFIGFS_FS=m
arch/tile: sync up the defconfig files to the tip This was inspired by mchehab@redhat.com's observation that we didn't have EDAC configured on by default in both files. In addition, we were setting INITRAMFS_SOURCE to a non-empty string, which isn't a very common default and required editing to do test builds. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-13 03:22:52 +08:00
CONFIG_ECRYPT_FS=m
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
CONFIG_NFS_FS=m
arch/tile: sync up the defconfig files to the tip This was inspired by mchehab@redhat.com's observation that we didn't have EDAC configured on by default in both files. In addition, we were setting INITRAMFS_SOURCE to a non-empty string, which isn't a very common default and required editing to do test builds. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-13 03:22:52 +08:00
CONFIG_NFS_V3_ACL=y
tile: refresh tile defconfig files These are based on the current shipping versions of the config files from Tilera, as synced up to the tip, so are a better starting point for folks who want a default configuration. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-06 20:58:35 +08:00
CONFIG_NFS_V4=m
arch/tile: sync up the defconfig files to the tip This was inspired by mchehab@redhat.com's observation that we didn't have EDAC configured on by default in both files. In addition, we were setting INITRAMFS_SOURCE to a non-empty string, which isn't a very common default and required editing to do test builds. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-13 03:22:52 +08:00
CONFIG_NFS_V4_1=y
CONFIG_NFS_FSCACHE=y
CONFIG_NFSD=m
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_CIFS=m
CONFIG_CIFS_STATS=y
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_FSCACHE=y
arch/tile: update defconfig file to something more useful Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-05-04 04:47:22 +08:00
CONFIG_NLS=y
arch/tile: sync up the defconfig files to the tip This was inspired by mchehab@redhat.com's observation that we didn't have EDAC configured on by default in both files. In addition, we were setting INITRAMFS_SOURCE to a non-empty string, which isn't a very common default and required editing to do test builds. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-13 03:22:52 +08:00
CONFIG_NLS_DEFAULT="utf8"
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
CONFIG_NLS_CODEPAGE_437=y
arch/tile: sync up the defconfig files to the tip This was inspired by mchehab@redhat.com's observation that we didn't have EDAC configured on by default in both files. In addition, we were setting INITRAMFS_SOURCE to a non-empty string, which isn't a very common default and required editing to do test builds. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-13 03:22:52 +08:00
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
tile: refresh tile defconfig files These are based on the current shipping versions of the config files from Tilera, as synced up to the tip, so are a better starting point for folks who want a default configuration. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-06 20:58:35 +08:00
CONFIG_DLM=m
arch/tile: sync up the defconfig files to the tip This was inspired by mchehab@redhat.com's observation that we didn't have EDAC configured on by default in both files. In addition, we were setting INITRAMFS_SOURCE to a non-empty string, which isn't a very common default and required editing to do test builds. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-13 03:22:52 +08:00
CONFIG_DLM_DEBUG=y
tile: refresh tile defconfig files These are based on the current shipping versions of the config files from Tilera, as synced up to the tip, so are a better starting point for folks who want a default configuration. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-06 20:58:35 +08:00
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_INFO_REDUCED=y
arch/tile: sync up the defconfig files to the tip This was inspired by mchehab@redhat.com's observation that we didn't have EDAC configured on by default in both files. In addition, we were setting INITRAMFS_SOURCE to a non-empty string, which isn't a very common default and required editing to do test builds. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-13 03:22:52 +08:00
# CONFIG_ENABLE_WARN_DEPRECATED is not set
arch/tile: core support for Tilera 32-bit chips. This change is the core kernel support for TILEPro and TILE64 chips. No driver support (except the console driver) is included yet. This includes the relevant Linux headers in asm/; the low-level low-level "Tile architecture" headers in arch/, which are shared with the hypervisor, etc., and are build-system agnostic; and the relevant hypervisor headers in hv/. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Reviewed-by: Paul Mundt <lethal@linux-sh.org>
2010-05-29 11:09:12 +08:00
CONFIG_FRAME_WARN=2048
arch/tile: sync up the defconfig files to the tip This was inspired by mchehab@redhat.com's observation that we didn't have EDAC configured on by default in both files. In addition, we were setting INITRAMFS_SOURCE to a non-empty string, which isn't a very common default and required editing to do test builds. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-13 03:22:52 +08:00
CONFIG_STRIP_ASM_SYMS=y
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
tile: refresh tile defconfig files These are based on the current shipping versions of the config files from Tilera, as synced up to the tip, so are a better starting point for folks who want a default configuration. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-06 20:58:35 +08:00
# CONFIG_FRAME_POINTER is not set
CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_STACKOVERFLOW=y
arch/tile: sync up the defconfig files to the tip This was inspired by mchehab@redhat.com's observation that we didn't have EDAC configured on by default in both files. In addition, we were setting INITRAMFS_SOURCE to a non-empty string, which isn't a very common default and required editing to do test builds. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-13 03:22:52 +08:00
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_CREDENTIALS=y
tile: refresh tile defconfig files These are based on the current shipping versions of the config files from Tilera, as synced up to the tip, so are a better starting point for folks who want a default configuration. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-06 20:58:35 +08:00
CONFIG_RCU_CPU_STALL_TIMEOUT=60
arch/tile: sync up the defconfig files to the tip This was inspired by mchehab@redhat.com's observation that we didn't have EDAC configured on by default in both files. In addition, we were setting INITRAMFS_SOURCE to a non-empty string, which isn't a very common default and required editing to do test builds. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-03-13 03:22:52 +08:00
CONFIG_ASYNC_RAID6_TEST=m
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
CONFIG_CRC_CCITT=m
CONFIG_CRC7=m