UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/clk/bcm/clk-kona.h

514 lines
17 KiB
C
Raw Normal View History

clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-15 02:29:18 +08:00
/*
* Copyright (C) 2013 Broadcom Corporation
* Copyright 2013 Linaro Limited
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef _CLK_KONA_H
#define _CLK_KONA_H
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/device.h>
#include <linux/of.h>
#include <linux/clk-provider.h>
#define BILLION 1000000000
/* The common clock framework uses u8 to represent a parent index */
#define PARENT_COUNT_MAX ((u32)U8_MAX)
#define BAD_CLK_INDEX U8_MAX /* Can't ever be valid */
#define BAD_CLK_NAME ((const char *)-1)
#define BAD_SCALED_DIV_VALUE U64_MAX
/*
* Utility macros for object flag management. If possible, flags
* should be defined such that 0 is the desired default value.
*/
#define FLAG(type, flag) BCM_CLK_ ## type ## _FLAGS_ ## flag
#define FLAG_SET(obj, type, flag) ((obj)->flags |= FLAG(type, flag))
#define FLAG_CLEAR(obj, type, flag) ((obj)->flags &= ~(FLAG(type, flag)))
#define FLAG_FLIP(obj, type, flag) ((obj)->flags ^= FLAG(type, flag))
#define FLAG_TEST(obj, type, flag) (!!((obj)->flags & FLAG(type, flag)))
clk: bcm281xx: add clock policy support Add support for CCU policy engine control, and also for setting the mask bits for bus clocks that require a policy change to get activated. This includes adding validity checking framework for CCUs, to validate the policy fields if defined. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:42 +08:00
/* CCU field state tests */
#define ccu_policy_exists(ccu_policy) ((ccu_policy)->enable.offset != 0)
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-15 02:29:18 +08:00
/* Clock field state tests */
clk: bcm281xx: add clock policy support Add support for CCU policy engine control, and also for setting the mask bits for bus clocks that require a policy change to get activated. This includes adding validity checking framework for CCUs, to validate the policy fields if defined. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:42 +08:00
#define policy_exists(policy) ((policy)->offset != 0)
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-15 02:29:18 +08:00
#define gate_exists(gate) FLAG_TEST(gate, GATE, EXISTS)
#define gate_is_enabled(gate) FLAG_TEST(gate, GATE, ENABLED)
#define gate_is_hw_controllable(gate) FLAG_TEST(gate, GATE, HW)
#define gate_is_sw_controllable(gate) FLAG_TEST(gate, GATE, SW)
#define gate_is_sw_managed(gate) FLAG_TEST(gate, GATE, SW_MANAGED)
#define gate_is_no_disable(gate) FLAG_TEST(gate, GATE, NO_DISABLE)
#define gate_flip_enabled(gate) FLAG_FLIP(gate, GATE, ENABLED)
clk: bcm281xx: add clock hysteresis support Add support for clock gate hysteresis control. For now, if it's defined for a clock, it's enabled. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:43 +08:00
#define hyst_exists(hyst) ((hyst)->offset != 0)
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-15 02:29:18 +08:00
#define divider_exists(div) FLAG_TEST(div, DIV, EXISTS)
#define divider_is_fixed(div) FLAG_TEST(div, DIV, FIXED)
#define divider_has_fraction(div) (!divider_is_fixed(div) && \
clk: bcm281xx: don't use unnamed structs or unions The Broadcom Kona clock code, as originally written, made use of unnamed union and struct fields. This is a feature present in C11, and is a GNU extension otherwise. It worked very well for me. Unfortunately, Russell King reported that this feature was not supported in a build environment he used, which meant attempting to build this code failed spectacularly. Add names to these unnamed fields, and update the code accordingly. Reported-by: Russell King <linux@arm.linux.org.uk> Tested-by: Markus Mayer <markus.mayer@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-07 21:22:12 +08:00
(div)->u.s.frac_width > 0)
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-15 02:29:18 +08:00
#define selector_exists(sel) ((sel)->width != 0)
#define trigger_exists(trig) FLAG_TEST(trig, TRIG, EXISTS)
clk: bcm281xx: add clock policy support Add support for CCU policy engine control, and also for setting the mask bits for bus clocks that require a policy change to get activated. This includes adding validity checking framework for CCUs, to validate the policy fields if defined. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:42 +08:00
#define policy_lvm_en_exists(enable) ((enable)->offset != 0)
#define policy_ctl_exists(control) ((control)->offset != 0)
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-15 02:29:18 +08:00
/* Clock type, used to tell common block what it's part of */
enum bcm_clk_type {
bcm_clk_none, /* undefined clock type */
bcm_clk_bus,
bcm_clk_core,
bcm_clk_peri
};
clk: bcm281xx: add clock policy support Add support for CCU policy engine control, and also for setting the mask bits for bus clocks that require a policy change to get activated. This includes adding validity checking framework for CCUs, to validate the policy fields if defined. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:42 +08:00
/*
* CCU policy control for clocks. Clocks can be enabled or disabled
* based on the CCU policy in effect. One bit in each policy mask
* register (one per CCU policy) represents whether the clock is
* enabled when that policy is effect or not. The CCU policy engine
* must be stopped to update these bits, and must be restarted again
* afterward.
*/
struct bcm_clk_policy {
u32 offset; /* first policy mask register offset */
u32 bit; /* bit used in all mask registers */
};
/* Policy initialization macro */
#define POLICY(_offset, _bit) \
{ \
.offset = (_offset), \
.bit = (_bit), \
}
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-15 02:29:18 +08:00
/*
* Gating control and status is managed by a 32-bit gate register.
*
* There are several types of gating available:
* - (no gate)
* A clock with no gate is assumed to be always enabled.
* - hardware-only gating (auto-gating)
* Enabling or disabling clocks with this type of gate is
* managed automatically by the hardware. Such clocks can be
* considered by the software to be enabled. The current status
* of auto-gated clocks can be read from the gate status bit.
* - software-only gating
* Auto-gating is not available for this type of clock.
* Instead, software manages whether it's enabled by setting or
* clearing the enable bit. The current gate status of a gate
* under software control can be read from the gate status bit.
* To ensure a change to the gating status is complete, the
* status bit can be polled to verify that the gate has entered
* the desired state.
* - selectable hardware or software gating
* Gating for this type of clock can be configured to be either
* under software or hardware control. Which type is in use is
* determined by the hw_sw_sel bit of the gate register.
*/
struct bcm_clk_gate {
u32 offset; /* gate register offset */
u32 status_bit; /* 0: gate is disabled; 0: gatge is enabled */
u32 en_bit; /* 0: disable; 1: enable */
u32 hw_sw_sel_bit; /* 0: hardware gating; 1: software gating */
u32 flags; /* BCM_CLK_GATE_FLAGS_* below */
};
/*
* Gate flags:
* HW means this gate can be auto-gated
* SW means the state of this gate can be software controlled
* NO_DISABLE means this gate is (only) enabled if under software control
* SW_MANAGED means the status of this gate is under software control
* ENABLED means this software-managed gate is *supposed* to be enabled
*/
#define BCM_CLK_GATE_FLAGS_EXISTS ((u32)1 << 0) /* Gate is valid */
#define BCM_CLK_GATE_FLAGS_HW ((u32)1 << 1) /* Can auto-gate */
#define BCM_CLK_GATE_FLAGS_SW ((u32)1 << 2) /* Software control */
#define BCM_CLK_GATE_FLAGS_NO_DISABLE ((u32)1 << 3) /* HW or enabled */
#define BCM_CLK_GATE_FLAGS_SW_MANAGED ((u32)1 << 4) /* SW now in control */
#define BCM_CLK_GATE_FLAGS_ENABLED ((u32)1 << 5) /* If SW_MANAGED */
/*
* Gate initialization macros.
*
* Any gate initially under software control will be enabled.
*/
/* A hardware/software gate initially under software control */
#define HW_SW_GATE(_offset, _status_bit, _en_bit, _hw_sw_sel_bit) \
{ \
.offset = (_offset), \
.status_bit = (_status_bit), \
.en_bit = (_en_bit), \
.hw_sw_sel_bit = (_hw_sw_sel_bit), \
.flags = FLAG(GATE, HW)|FLAG(GATE, SW)| \
FLAG(GATE, SW_MANAGED)|FLAG(GATE, ENABLED)| \
FLAG(GATE, EXISTS), \
}
/* A hardware/software gate initially under hardware control */
#define HW_SW_GATE_AUTO(_offset, _status_bit, _en_bit, _hw_sw_sel_bit) \
{ \
.offset = (_offset), \
.status_bit = (_status_bit), \
.en_bit = (_en_bit), \
.hw_sw_sel_bit = (_hw_sw_sel_bit), \
.flags = FLAG(GATE, HW)|FLAG(GATE, SW)| \
FLAG(GATE, EXISTS), \
}
/* A hardware-or-enabled gate (enabled if not under hardware control) */
#define HW_ENABLE_GATE(_offset, _status_bit, _en_bit, _hw_sw_sel_bit) \
{ \
.offset = (_offset), \
.status_bit = (_status_bit), \
.en_bit = (_en_bit), \
.hw_sw_sel_bit = (_hw_sw_sel_bit), \
.flags = FLAG(GATE, HW)|FLAG(GATE, SW)| \
FLAG(GATE, NO_DISABLE)|FLAG(GATE, EXISTS), \
}
/* A software-only gate */
#define SW_ONLY_GATE(_offset, _status_bit, _en_bit) \
{ \
.offset = (_offset), \
.status_bit = (_status_bit), \
.en_bit = (_en_bit), \
.flags = FLAG(GATE, SW)|FLAG(GATE, SW_MANAGED)| \
FLAG(GATE, ENABLED)|FLAG(GATE, EXISTS), \
}
/* A hardware-only gate */
#define HW_ONLY_GATE(_offset, _status_bit) \
{ \
.offset = (_offset), \
.status_bit = (_status_bit), \
.flags = FLAG(GATE, HW)|FLAG(GATE, EXISTS), \
}
clk: bcm281xx: add clock hysteresis support Add support for clock gate hysteresis control. For now, if it's defined for a clock, it's enabled. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:43 +08:00
/* Gate hysteresis for clocks */
struct bcm_clk_hyst {
u32 offset; /* hyst register offset (normally CLKGATE) */
u32 en_bit; /* bit used to enable hysteresis */
u32 val_bit; /* if enabled: 0 = low delay; 1 = high delay */
};
/* Hysteresis initialization macro */
#define HYST(_offset, _en_bit, _val_bit) \
{ \
.offset = (_offset), \
.en_bit = (_en_bit), \
.val_bit = (_val_bit), \
}
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-15 02:29:18 +08:00
/*
* Each clock can have zero, one, or two dividers which change the
* output rate of the clock. Each divider can be either fixed or
* variable. If there are two dividers, they are the "pre-divider"
* and the "regular" or "downstream" divider. If there is only one,
* there is no pre-divider.
*
* A fixed divider is any non-zero (positive) value, and it
* indicates how the input rate is affected by the divider.
*
* The value of a variable divider is maintained in a sub-field of a
* 32-bit divider register. The position of the field in the
* register is defined by its offset and width. The value recorded
* in this field is always 1 less than the value it represents.
*
* In addition, a variable divider can indicate that some subset
* of its bits represent a "fractional" part of the divider. Such
* bits comprise the low-order portion of the divider field, and can
* be viewed as representing the portion of the divider that lies to
* the right of the decimal point. Most variable dividers have zero
* fractional bits. Variable dividers with non-zero fraction width
* still record a value 1 less than the value they represent; the
* added 1 does *not* affect the low-order bit in this case, it
* affects the bits above the fractional part only. (Often in this
* code a divider field value is distinguished from the value it
* represents by referring to the latter as a "divisor".)
*
* In order to avoid dealing with fractions, divider arithmetic is
* performed using "scaled" values. A scaled value is one that's
* been left-shifted by the fractional width of a divider. Dividing
* a scaled value by a scaled divisor produces the desired quotient
* without loss of precision and without any other special handling
* for fractions.
*
* The recorded value of a variable divider can be modified. To
* modify either divider (or both), a clock must be enabled (i.e.,
* using its gate). In addition, a trigger register (described
* below) must be used to commit the change, and polled to verify
* the change is complete.
*/
struct bcm_clk_div {
union {
struct { /* variable divider */
u32 offset; /* divider register offset */
u32 shift; /* field shift */
u32 width; /* field width */
u32 frac_width; /* field fraction width */
u64 scaled_div; /* scaled divider value */
clk: bcm281xx: don't use unnamed structs or unions The Broadcom Kona clock code, as originally written, made use of unnamed union and struct fields. This is a feature present in C11, and is a GNU extension otherwise. It worked very well for me. Unfortunately, Russell King reported that this feature was not supported in a build environment he used, which meant attempting to build this code failed spectacularly. Add names to these unnamed fields, and update the code accordingly. Reported-by: Russell King <linux@arm.linux.org.uk> Tested-by: Markus Mayer <markus.mayer@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-07 21:22:12 +08:00
} s;
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-15 02:29:18 +08:00
u32 fixed; /* non-zero fixed divider value */
clk: bcm281xx: don't use unnamed structs or unions The Broadcom Kona clock code, as originally written, made use of unnamed union and struct fields. This is a feature present in C11, and is a GNU extension otherwise. It worked very well for me. Unfortunately, Russell King reported that this feature was not supported in a build environment he used, which meant attempting to build this code failed spectacularly. Add names to these unnamed fields, and update the code accordingly. Reported-by: Russell King <linux@arm.linux.org.uk> Tested-by: Markus Mayer <markus.mayer@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-07 21:22:12 +08:00
} u;
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-15 02:29:18 +08:00
u32 flags; /* BCM_CLK_DIV_FLAGS_* below */
};
/*
* Divider flags:
* EXISTS means this divider exists
* FIXED means it is a fixed-rate divider
*/
#define BCM_CLK_DIV_FLAGS_EXISTS ((u32)1 << 0) /* Divider is valid */
#define BCM_CLK_DIV_FLAGS_FIXED ((u32)1 << 1) /* Fixed-value */
/* Divider initialization macros */
/* A fixed (non-zero) divider */
#define FIXED_DIVIDER(_value) \
{ \
clk: bcm281xx: don't use unnamed structs or unions The Broadcom Kona clock code, as originally written, made use of unnamed union and struct fields. This is a feature present in C11, and is a GNU extension otherwise. It worked very well for me. Unfortunately, Russell King reported that this feature was not supported in a build environment he used, which meant attempting to build this code failed spectacularly. Add names to these unnamed fields, and update the code accordingly. Reported-by: Russell King <linux@arm.linux.org.uk> Tested-by: Markus Mayer <markus.mayer@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-07 21:22:12 +08:00
.u.fixed = (_value), \
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-15 02:29:18 +08:00
.flags = FLAG(DIV, EXISTS)|FLAG(DIV, FIXED), \
}
/* A divider with an integral divisor */
#define DIVIDER(_offset, _shift, _width) \
{ \
clk: bcm281xx: don't use unnamed structs or unions The Broadcom Kona clock code, as originally written, made use of unnamed union and struct fields. This is a feature present in C11, and is a GNU extension otherwise. It worked very well for me. Unfortunately, Russell King reported that this feature was not supported in a build environment he used, which meant attempting to build this code failed spectacularly. Add names to these unnamed fields, and update the code accordingly. Reported-by: Russell King <linux@arm.linux.org.uk> Tested-by: Markus Mayer <markus.mayer@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-07 21:22:12 +08:00
.u.s.offset = (_offset), \
.u.s.shift = (_shift), \
.u.s.width = (_width), \
.u.s.scaled_div = BAD_SCALED_DIV_VALUE, \
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-15 02:29:18 +08:00
.flags = FLAG(DIV, EXISTS), \
}
/* A divider whose divisor has an integer and fractional part */
#define FRAC_DIVIDER(_offset, _shift, _width, _frac_width) \
{ \
clk: bcm281xx: don't use unnamed structs or unions The Broadcom Kona clock code, as originally written, made use of unnamed union and struct fields. This is a feature present in C11, and is a GNU extension otherwise. It worked very well for me. Unfortunately, Russell King reported that this feature was not supported in a build environment he used, which meant attempting to build this code failed spectacularly. Add names to these unnamed fields, and update the code accordingly. Reported-by: Russell King <linux@arm.linux.org.uk> Tested-by: Markus Mayer <markus.mayer@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-07 21:22:12 +08:00
.u.s.offset = (_offset), \
.u.s.shift = (_shift), \
.u.s.width = (_width), \
.u.s.frac_width = (_frac_width), \
.u.s.scaled_div = BAD_SCALED_DIV_VALUE, \
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-15 02:29:18 +08:00
.flags = FLAG(DIV, EXISTS), \
}
/*
* Clocks may have multiple "parent" clocks. If there is more than
* one, a selector must be specified to define which of the parent
* clocks is currently in use. The selected clock is indicated in a
* sub-field of a 32-bit selector register. The range of
* representable selector values typically exceeds the number of
* available parent clocks. Occasionally the reset value of a
* selector field is explicitly set to a (specific) value that does
* not correspond to a defined input clock.
*
* We register all known parent clocks with the common clock code
* using a packed array (i.e., no empty slots) of (parent) clock
* names, and refer to them later using indexes into that array.
* We maintain an array of selector values indexed by common clock
* index values in order to map between these common clock indexes
* and the selector values used by the hardware.
*
* Like dividers, a selector can be modified, but to do so a clock
* must be enabled, and a trigger must be used to commit the change.
*/
struct bcm_clk_sel {
u32 offset; /* selector register offset */
u32 shift; /* field shift */
u32 width; /* field width */
u32 parent_count; /* number of entries in parent_sel[] */
u32 *parent_sel; /* array of parent selector values */
u8 clk_index; /* current selected index in parent_sel[] */
};
/* Selector initialization macro */
#define SELECTOR(_offset, _shift, _width) \
{ \
.offset = (_offset), \
.shift = (_shift), \
.width = (_width), \
.clk_index = BAD_CLK_INDEX, \
}
/*
* Making changes to a variable divider or a selector for a clock
* requires the use of a trigger. A trigger is defined by a single
* bit within a register. To signal a change, a 1 is written into
* that bit. To determine when the change has been completed, that
* trigger bit is polled; the read value will be 1 while the change
* is in progress, and 0 when it is complete.
*
* Occasionally a clock will have more than one trigger. In this
* case, the "pre-trigger" will be used when changing a clock's
* selector and/or its pre-divider.
*/
struct bcm_clk_trig {
u32 offset; /* trigger register offset */
u32 bit; /* trigger bit */
u32 flags; /* BCM_CLK_TRIG_FLAGS_* below */
};
/*
* Trigger flags:
* EXISTS means this trigger exists
*/
#define BCM_CLK_TRIG_FLAGS_EXISTS ((u32)1 << 0) /* Trigger is valid */
/* Trigger initialization macro */
#define TRIGGER(_offset, _bit) \
{ \
.offset = (_offset), \
.bit = (_bit), \
.flags = FLAG(TRIG, EXISTS), \
}
struct peri_clk_data {
clk: bcm281xx: add clock policy support Add support for CCU policy engine control, and also for setting the mask bits for bus clocks that require a policy change to get activated. This includes adding validity checking framework for CCUs, to validate the policy fields if defined. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:42 +08:00
struct bcm_clk_policy policy;
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-15 02:29:18 +08:00
struct bcm_clk_gate gate;
clk: bcm281xx: add clock hysteresis support Add support for clock gate hysteresis control. For now, if it's defined for a clock, it's enabled. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:43 +08:00
struct bcm_clk_hyst hyst;
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-15 02:29:18 +08:00
struct bcm_clk_trig pre_trig;
struct bcm_clk_div pre_div;
struct bcm_clk_trig trig;
struct bcm_clk_div div;
struct bcm_clk_sel sel;
const char *clocks[]; /* must be last; use CLOCKS() to declare */
};
#define CLOCKS(...) { __VA_ARGS__, NULL, }
#define NO_CLOCKS { NULL, } /* Must use of no parent clocks */
struct kona_clk {
struct clk_hw hw;
clk: bcm281xx: use init_data.name for clock name Use the init_data.name field to hold the name of a Kona clock rather than duplicating it. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:38 +08:00
struct clk_init_data init_data; /* includes name of this clock */
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-15 02:29:18 +08:00
struct ccu_data *ccu; /* ccu this clock is associated with */
enum bcm_clk_type type;
union {
void *data;
struct peri_clk_data *peri;
clk: bcm281xx: don't use unnamed structs or unions The Broadcom Kona clock code, as originally written, made use of unnamed union and struct fields. This is a feature present in C11, and is a GNU extension otherwise. It worked very well for me. Unfortunately, Russell King reported that this feature was not supported in a build environment he used, which meant attempting to build this code failed spectacularly. Add names to these unnamed fields, and update the code accordingly. Reported-by: Russell King <linux@arm.linux.org.uk> Tested-by: Markus Mayer <markus.mayer@linaro.org> Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-07 21:22:12 +08:00
} u;
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-15 02:29:18 +08:00
};
#define to_kona_clk(_hw) \
container_of(_hw, struct kona_clk, hw)
clk: bcm281xx: define CCU clock data statically Rather than "manually" setting up each CCU's clock entries at run time, define a flexible array of generic Kona clock structures within the CCU structure itself. Each of these entries contains generic kona clock information (like its CCU pointer and clock framework initialization data). Each also has a pointer to a structure contianing clock type-dependent initialization data (like register definitions). Since we'll iterate over these arrays we need to be sure they have slots for all potential clock index values. (E.g. for the root CCU we must have at least BCM281XX_ROOT_CCU_CLOCK_COUNT slots.) To ensure this we always define an extra entry and fill it using the special initializer LAST_KONA_CLK. Just about everything we need to know about a clock can be defined statically. As a result, kona_clk_setup() can be changed to take just a kona_clk structure as its argument, and peri_clk_setup() can be simplified. With the information pre-defined we are also able to handle most clock setup genericially. We can do away with the CCU-specific callback functions that previously were needed to set up the entries in CCU's clock array. Move the definition of the ccu_data structure down in "clk-kona.h" to avoid a forward dependency. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:41 +08:00
/* Initialization macro for an entry in a CCU's kona_clks[] array. */
#define KONA_CLK(_ccu_name, _clk_name, _type) \
{ \
.init_data = { \
.name = #_clk_name, \
.ops = &kona_ ## _type ## _clk_ops, \
}, \
.ccu = &_ccu_name ## _ccu_data, \
.type = bcm_clk_ ## _type, \
.u.data = &_clk_name ## _data, \
}
#define LAST_KONA_CLK { .type = bcm_clk_none }
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-15 02:29:18 +08:00
clk: bcm281xx: add clock policy support Add support for CCU policy engine control, and also for setting the mask bits for bus clocks that require a policy change to get activated. This includes adding validity checking framework for CCUs, to validate the policy fields if defined. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:42 +08:00
/*
* CCU policy control. To enable software update of the policy
* tables the CCU policy engine must be stopped by setting the
* software update enable bit (LVM_EN). After an update the engine
* is restarted using the GO bit and either the GO_ATL or GO_AC bit.
*/
struct bcm_lvm_en {
u32 offset; /* LVM_EN register offset */
u32 bit; /* POLICY_CONFIG_EN bit in register */
};
/* Policy enable initialization macro */
#define CCU_LVM_EN(_offset, _bit) \
{ \
.offset = (_offset), \
.bit = (_bit), \
}
struct bcm_policy_ctl {
u32 offset; /* POLICY_CTL register offset */
u32 go_bit;
u32 atl_bit; /* GO, GO_ATL, and GO_AC bits */
u32 ac_bit;
};
/* Policy control initialization macro */
#define CCU_POLICY_CTL(_offset, _go_bit, _ac_bit, _atl_bit) \
{ \
.offset = (_offset), \
.go_bit = (_go_bit), \
.ac_bit = (_ac_bit), \
.atl_bit = (_atl_bit), \
}
struct ccu_policy {
struct bcm_lvm_en enable;
struct bcm_policy_ctl control;
};
clk: bcm281xx: define CCU clock data statically Rather than "manually" setting up each CCU's clock entries at run time, define a flexible array of generic Kona clock structures within the CCU structure itself. Each of these entries contains generic kona clock information (like its CCU pointer and clock framework initialization data). Each also has a pointer to a structure contianing clock type-dependent initialization data (like register definitions). Since we'll iterate over these arrays we need to be sure they have slots for all potential clock index values. (E.g. for the root CCU we must have at least BCM281XX_ROOT_CCU_CLOCK_COUNT slots.) To ensure this we always define an extra entry and fill it using the special initializer LAST_KONA_CLK. Just about everything we need to know about a clock can be defined statically. As a result, kona_clk_setup() can be changed to take just a kona_clk structure as its argument, and peri_clk_setup() can be simplified. With the information pre-defined we are also able to handle most clock setup genericially. We can do away with the CCU-specific callback functions that previously were needed to set up the entries in CCU's clock array. Move the definition of the ccu_data structure down in "clk-kona.h" to avoid a forward dependency. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:41 +08:00
/*
* Each CCU defines a mapped area of memory containing registers
* used to manage clocks implemented by the CCU. Access to memory
* within the CCU's space is serialized by a spinlock. Before any
* (other) address can be written, a special access "password" value
* must be written to its WR_ACCESS register (located at the base
* address of the range). We keep track of the name of each CCU as
* it is set up, and maintain them in a list.
*/
struct ccu_data {
void __iomem *base; /* base of mapped address space */
spinlock_t lock; /* serialization lock */
bool write_enabled; /* write access is currently enabled */
clk: bcm281xx: add clock policy support Add support for CCU policy engine control, and also for setting the mask bits for bus clocks that require a policy change to get activated. This includes adding validity checking framework for CCUs, to validate the policy fields if defined. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:42 +08:00
struct ccu_policy policy;
clk: bcm281xx: define CCU clock data statically Rather than "manually" setting up each CCU's clock entries at run time, define a flexible array of generic Kona clock structures within the CCU structure itself. Each of these entries contains generic kona clock information (like its CCU pointer and clock framework initialization data). Each also has a pointer to a structure contianing clock type-dependent initialization data (like register definitions). Since we'll iterate over these arrays we need to be sure they have slots for all potential clock index values. (E.g. for the root CCU we must have at least BCM281XX_ROOT_CCU_CLOCK_COUNT slots.) To ensure this we always define an extra entry and fill it using the special initializer LAST_KONA_CLK. Just about everything we need to know about a clock can be defined statically. As a result, kona_clk_setup() can be changed to take just a kona_clk structure as its argument, and peri_clk_setup() can be simplified. With the information pre-defined we are also able to handle most clock setup genericially. We can do away with the CCU-specific callback functions that previously were needed to set up the entries in CCU's clock array. Move the definition of the ccu_data structure down in "clk-kona.h" to avoid a forward dependency. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:41 +08:00
struct device_node *node;
struct clk_onecell_data clk_data;
const char *name;
u32 range; /* byte range of address space */
struct kona_clk kona_clks[]; /* must be last */
};
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-15 02:29:18 +08:00
clk: bcm281xx: define CCU clock data statically Rather than "manually" setting up each CCU's clock entries at run time, define a flexible array of generic Kona clock structures within the CCU structure itself. Each of these entries contains generic kona clock information (like its CCU pointer and clock framework initialization data). Each also has a pointer to a structure contianing clock type-dependent initialization data (like register definitions). Since we'll iterate over these arrays we need to be sure they have slots for all potential clock index values. (E.g. for the root CCU we must have at least BCM281XX_ROOT_CCU_CLOCK_COUNT slots.) To ensure this we always define an extra entry and fill it using the special initializer LAST_KONA_CLK. Just about everything we need to know about a clock can be defined statically. As a result, kona_clk_setup() can be changed to take just a kona_clk structure as its argument, and peri_clk_setup() can be simplified. With the information pre-defined we are also able to handle most clock setup genericially. We can do away with the CCU-specific callback functions that previously were needed to set up the entries in CCU's clock array. Move the definition of the ccu_data structure down in "clk-kona.h" to avoid a forward dependency. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:41 +08:00
/* Initialization for common fields in a Kona ccu_data structure */
#define KONA_CCU_COMMON(_prefix, _name, _ccuname) \
.name = #_name "_ccu", \
.lock = __SPIN_LOCK_UNLOCKED(_name ## _ccu_data.lock), \
.clk_data = { \
.clk_num = _prefix ## _ ## _ccuname ## _CCU_CLOCK_COUNT, \
}
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-15 02:29:18 +08:00
clk: bcm281xx: define CCU clock data statically Rather than "manually" setting up each CCU's clock entries at run time, define a flexible array of generic Kona clock structures within the CCU structure itself. Each of these entries contains generic kona clock information (like its CCU pointer and clock framework initialization data). Each also has a pointer to a structure contianing clock type-dependent initialization data (like register definitions). Since we'll iterate over these arrays we need to be sure they have slots for all potential clock index values. (E.g. for the root CCU we must have at least BCM281XX_ROOT_CCU_CLOCK_COUNT slots.) To ensure this we always define an extra entry and fill it using the special initializer LAST_KONA_CLK. Just about everything we need to know about a clock can be defined statically. As a result, kona_clk_setup() can be changed to take just a kona_clk structure as its argument, and peri_clk_setup() can be simplified. With the information pre-defined we are also able to handle most clock setup genericially. We can do away with the CCU-specific callback functions that previously were needed to set up the entries in CCU's clock array. Move the definition of the ccu_data structure down in "clk-kona.h" to avoid a forward dependency. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:41 +08:00
/* Exported globals */
clk: bcm281xx: initialize CCU structures statically We know up front how many CCU's we'll support, so there's no need to allocate their data structures dynamically. Define a macro KONA_CCU_COMMON() to simplify the initialization of many of the fields in a ccu_data structure. Pass the address of a statically defined CCU structure to kona_dt_ccu_setup() rather than having that function allocate one. We also know at build time how many clocks a given CCU will provide, though the number of of them for each CCU is different. Record the number of clocks we need in the CCU's clk_onecell_data struct (which is used when we register the CCU with the common clock code as a clock provider). Rename that struct field "clk_data" (because "data" alone gets a little confusing). Use the known clock count to move the allocation of each CCU's clocks array into ccu_clks_setup() rather than having each CCU's setup callback function do it. (The real motivation behind all of this is that we'll be doing some static initialization of some additional CCU-specific data soon.) Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:40 +08:00
clk: bcm281xx: define CCU clock data statically Rather than "manually" setting up each CCU's clock entries at run time, define a flexible array of generic Kona clock structures within the CCU structure itself. Each of these entries contains generic kona clock information (like its CCU pointer and clock framework initialization data). Each also has a pointer to a structure contianing clock type-dependent initialization data (like register definitions). Since we'll iterate over these arrays we need to be sure they have slots for all potential clock index values. (E.g. for the root CCU we must have at least BCM281XX_ROOT_CCU_CLOCK_COUNT slots.) To ensure this we always define an extra entry and fill it using the special initializer LAST_KONA_CLK. Just about everything we need to know about a clock can be defined statically. As a result, kona_clk_setup() can be changed to take just a kona_clk structure as its argument, and peri_clk_setup() can be simplified. With the information pre-defined we are also able to handle most clock setup genericially. We can do away with the CCU-specific callback functions that previously were needed to set up the entries in CCU's clock array. Move the definition of the ccu_data structure down in "clk-kona.h" to avoid a forward dependency. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:41 +08:00
extern struct clk_ops kona_peri_clk_ops;
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-15 02:29:18 +08:00
/* Externally visible functions */
extern u64 scaled_div_max(struct bcm_clk_div *div);
extern u64 scaled_div_build(struct bcm_clk_div *div, u32 div_value,
u32 billionths);
clk: bcm281xx: define CCU clock data statically Rather than "manually" setting up each CCU's clock entries at run time, define a flexible array of generic Kona clock structures within the CCU structure itself. Each of these entries contains generic kona clock information (like its CCU pointer and clock framework initialization data). Each also has a pointer to a structure contianing clock type-dependent initialization data (like register definitions). Since we'll iterate over these arrays we need to be sure they have slots for all potential clock index values. (E.g. for the root CCU we must have at least BCM281XX_ROOT_CCU_CLOCK_COUNT slots.) To ensure this we always define an extra entry and fill it using the special initializer LAST_KONA_CLK. Just about everything we need to know about a clock can be defined statically. As a result, kona_clk_setup() can be changed to take just a kona_clk structure as its argument, and peri_clk_setup() can be simplified. With the information pre-defined we are also able to handle most clock setup genericially. We can do away with the CCU-specific callback functions that previously were needed to set up the entries in CCU's clock array. Move the definition of the ccu_data structure down in "clk-kona.h" to avoid a forward dependency. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:41 +08:00
extern struct clk *kona_clk_setup(struct kona_clk *bcm_clk);
clk: bcm281xx: initialize CCU structures statically We know up front how many CCU's we'll support, so there's no need to allocate their data structures dynamically. Define a macro KONA_CCU_COMMON() to simplify the initialization of many of the fields in a ccu_data structure. Pass the address of a statically defined CCU structure to kona_dt_ccu_setup() rather than having that function allocate one. We also know at build time how many clocks a given CCU will provide, though the number of of them for each CCU is different. Record the number of clocks we need in the CCU's clk_onecell_data struct (which is used when we register the CCU with the common clock code as a clock provider). Rename that struct field "clk_data" (because "data" alone gets a little confusing). Use the known clock count to move the allocation of each CCU's clocks array into ccu_clks_setup() rather than having each CCU's setup callback function do it. (The real motivation behind all of this is that we'll be doing some static initialization of some additional CCU-specific data soon.) Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:40 +08:00
extern void __init kona_dt_ccu_setup(struct ccu_data *ccu,
clk: bcm281xx: define CCU clock data statically Rather than "manually" setting up each CCU's clock entries at run time, define a flexible array of generic Kona clock structures within the CCU structure itself. Each of these entries contains generic kona clock information (like its CCU pointer and clock framework initialization data). Each also has a pointer to a structure contianing clock type-dependent initialization data (like register definitions). Since we'll iterate over these arrays we need to be sure they have slots for all potential clock index values. (E.g. for the root CCU we must have at least BCM281XX_ROOT_CCU_CLOCK_COUNT slots.) To ensure this we always define an extra entry and fill it using the special initializer LAST_KONA_CLK. Just about everything we need to know about a clock can be defined statically. As a result, kona_clk_setup() can be changed to take just a kona_clk structure as its argument, and peri_clk_setup() can be simplified. With the information pre-defined we are also able to handle most clock setup genericially. We can do away with the CCU-specific callback functions that previously were needed to set up the entries in CCU's clock array. Move the definition of the ccu_data structure down in "clk-kona.h" to avoid a forward dependency. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-04-22 05:11:41 +08:00
struct device_node *node);
clk: bcm281xx: add initial clock framework support Add code for device tree support of clocks in the BCM281xx family of SoCs. Machines in this family use peripheral clocks implemented by "Kona" clock control units (CCUs). (Other Broadcom SoC families use Kona style CCUs as well, but support for them is not yet upstream.) A BCM281xx SoC has multiple CCUs, each of which manages a set of clocks on the SoC. A Kona peripheral clock is composite clock that may include a gate, a parent clock multiplexor, and zero, one or two dividers. There is a variety of gate types, and many gates implement hardware-managed gating (often called "auto-gating"). Most dividers divide their input clock signal by an integer value (one or more). There are also "fractional" dividers which allow division by non-integer values. To accomodate such dividers, clock rates and dividers are generally maintained by the code in "scaled" form, which allows integer and fractional dividers to be handled in a uniform way. If present, the gate for a Kona peripheral clock must be enabled when a change is made to its multiplexor or one of its dividers. Additionally, dividers and multiplexors have trigger registers which must be used whenever the divider value or selected parent clock is changed. The same trigger is often used for a divider and multiplexor, and a BCM281xx peripheral clock occasionally has two triggers. The gate, dividers, and parent clock selector are treated in this code as "components" of a peripheral clock. Their functionality is implemented directly--e.g. the common clock framework gate implementation is not used for a Kona peripheral clock gate. (This has being considered though, and the intention is to evolve this code to leverage common code as much as possible.) The source code is divided into three general portions: drivers/clk/bcm/clk-kona.h drivers/clk/bcm/clk-kona.c These implement the basic Kona clock functionality, including the clk_ops methods and various routines to manipulate registers and interpret their values. This includes some functions used to set clocks to a desired initial state (though this feature is only partially implemented here). drivers/clk/bcm/clk-kona-setup.c This contains generic run-time initialization code for data structures representing Kona CCUs and clocks. This encapsulates the clock structure initialization that can't be done statically. Note that there is a great deal of validity-checking code here, making explicit certain assumptions in the code. This is mostly useful for adding new clock definitions and could possibly be disabled for production use. drivers/clk/bcm/clk-bcm281xx.c This file defines the specific CCUs used by BCM281XX family SoCs, as well as the specific clocks implemented by each. It declares a device tree clock match entry for each CCU defined. include/dt-bindings/clock/bcm281xx.h This file defines the selector (index) values used to identify a particular clock provided by a CCU. It consists entirely of C preprocessor constants, to be used by both the C source and device tree source files. Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <mporter@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-02-15 02:29:18 +08:00
extern bool __init kona_ccu_init(struct ccu_data *ccu);
#endif /* _CLK_KONA_H */