OpenCloudOS-Kernel/tools/perf/config/Makefile

596 lines
16 KiB
Makefile
Raw Normal View History

uname_M := $(shell uname -m 2>/dev/null || echo not)
ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
-e s/arm.*/arm/ -e s/sa110/arm/ \
-e s/s390x/s390/ -e s/parisc64/parisc/ \
-e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
-e s/sh[234].*/sh/ -e s/aarch64.*/arm64/ )
NO_PERF_REGS := 1
CFLAGS := $(EXTRA_CFLAGS) $(EXTRA_WARNINGS)
# Additional ARCH settings for x86
ifeq ($(ARCH),i386)
override ARCH := x86
NO_PERF_REGS := 0
LIBUNWIND_LIBS = -lunwind -lunwind-x86
endif
ifeq ($(ARCH),x86_64)
override ARCH := x86
IS_X86_64 := 0
ifeq (, $(findstring m32,$(CFLAGS)))
IS_X86_64 := $(shell echo __x86_64__ | ${CC} -E -x c - | tail -n 1)
endif
ifeq (${IS_X86_64}, 1)
RAW_ARCH := x86_64
CFLAGS += -DHAVE_ARCH_X86_64_SUPPORT
ARCH_INCLUDE = ../../arch/x86/lib/memcpy_64.S ../../arch/x86/lib/memset_64.S
LIBUNWIND_LIBS = -lunwind -lunwind-x86_64
else
LIBUNWIND_LIBS = -lunwind -lunwind-x86
endif
NO_PERF_REGS := 0
endif
ifeq ($(ARCH),arm)
NO_PERF_REGS := 0
LIBUNWIND_LIBS = -lunwind -lunwind-arm
endif
ifeq ($(NO_PERF_REGS),0)
CFLAGS += -DHAVE_PERF_REGS_SUPPORT
endif
ifeq ($(src-perf),)
src-perf := $(srctree)/tools/perf
endif
ifeq ($(obj-perf),)
obj-perf := $(OUTPUT)
endif
ifneq ($(obj-perf),)
obj-perf := $(abspath $(obj-perf))/
endif
LIB_INCLUDE := $(srctree)/tools/lib/
# include ARCH specific config
-include $(src-perf)/arch/$(ARCH)/Makefile
include $(src-perf)/config/utilities.mak
ifeq ($(call get-executable,$(FLEX)),)
dummy := $(error Error: $(FLEX) is missing on this system, please install it)
endif
ifeq ($(call get-executable,$(BISON)),)
dummy := $(error Error: $(BISON) is missing on this system, please install it)
endif
# Treat warnings as errors unless directed not to
ifneq ($(WERROR),0)
CFLAGS += -Werror
endif
ifndef DEBUG
DEBUG := 0
endif
ifeq ($(DEBUG),0)
CFLAGS += -O6
endif
ifdef PARSER_DEBUG
PARSER_DEBUG_BISON := -t
PARSER_DEBUG_FLEX := -d
CFLAGS += -DPARSER_DEBUG
endif
CFLAGS += -fno-omit-frame-pointer
CFLAGS += -ggdb3
CFLAGS += -funwind-tables
CFLAGS += -Wall
CFLAGS += -Wextra
CFLAGS += -std=gnu99
EXTLIBS = -lelf -lpthread -lrt -lm -ldl
ifneq ($(OUTPUT),)
OUTPUT_FEATURES = $(OUTPUT)config/feature-checks/
$(shell mkdir -p $(OUTPUT_FEATURES))
endif
feature_check = $(eval $(feature_check_code))
define feature_check_code
feature-$(1) := $(shell $(MAKE) OUTPUT=$(OUTPUT_FEATURES) CFLAGS="$(EXTRA_CFLAGS)" LDFLAGS="$(LDFLAGS)" LIBUNWIND_LIBS="$(LIBUNWIND_LIBS)" -C config/feature-checks test-$1 >/dev/null 2>/dev/null && echo 1 || echo 0)
endef
feature_set = $(eval $(feature_set_code))
define feature_set_code
feature-$(1) := 1
endef
#
# Build the feature check binaries in parallel, ignore errors, ignore return value and suppress output:
#
#
# Note that this is not a complete list of all feature tests, just
# those that are typically built on a fully configured system.
#
# [ Feature tests not mentioned here have to be built explicitly in
# the rule that uses them - an example for that is the 'bionic'
# feature check. ]
#
CORE_FEATURE_TESTS = \
backtrace \
dwarf \
fortify-source \
glibc \
gtk2 \
gtk2-infobar \
libaudit \
libbfd \
libelf \
libelf-getphdrnum \
libelf-mmap \
libnuma \
libperl \
libpython \
libpython-version \
libslang \
libunwind \
on-exit \
stackprotector-all \
timerfd
#
# So here we detect whether test-all was rebuilt, to be able
# to skip the print-out of the long features list if the file
# existed before and after it was built:
#
ifeq ($(wildcard $(OUTPUT)config/feature-checks/test-all),)
test-all-failed := 1
else
test-all-failed := 0
endif
#
# Special fast-path for the 'all features are available' case:
#
$(call feature_check,all,$(MSG))
#
# Just in case the build freshly failed, make sure we print the
# feature matrix:
#
ifeq ($(feature-all), 0)
test-all-failed := 1
endif
ifeq ($(test-all-failed),1)
$(info )
$(info Auto-detecting system features:)
endif
ifeq ($(feature-all), 1)
#
# test-all.c passed - just set all the core feature flags to 1:
#
$(foreach feat,$(CORE_FEATURE_TESTS),$(call feature_set,$(feat)))
else
$(shell $(MAKE) OUTPUT=$(OUTPUT_FEATURES) CFLAGS="$(EXTRA_CFLAGS)" LDFLAGS=$(LDFLAGS) -i -j -C config/feature-checks $(CORE_FEATURE_TESTS) >/dev/null 2>&1)
$(foreach feat,$(CORE_FEATURE_TESTS),$(call feature_check,$(feat)))
endif
#
# Print the result of the feature test:
#
feature_print = $(eval $(feature_print_code)) $(info $(MSG))
define feature_print_code
ifeq ($(feature-$(1)), 1)
MSG = $(shell printf '...%30s: [ \033[32mon\033[m ]' $(1))
else
MSG = $(shell printf '...%30s: [ \033[31mOFF\033[m ]' $(1))
endif
endef
#
# Only print out our features if we rebuilt the testcases or if a test failed:
#
ifeq ($(test-all-failed), 1)
$(foreach feat,$(CORE_FEATURE_TESTS),$(call feature_print,$(feat)))
$(info )
endif
ifeq ($(feature-stackprotector-all), 1)
CFLAGS += -fstack-protector-all
endif
ifeq ($(DEBUG),0)
ifeq ($(feature-fortify-source), 1)
CFLAGS += -D_FORTIFY_SOURCE=2
endif
endif
CFLAGS += -I$(src-perf)/util/include
CFLAGS += -I$(src-perf)/arch/$(ARCH)/include
CFLAGS += -I$(srctree)/arch/$(ARCH)/include/uapi
CFLAGS += -I$(srctree)/arch/$(ARCH)/include
CFLAGS += -I$(srctree)/include/uapi
CFLAGS += -I$(srctree)/include
# $(obj-perf) for generated common-cmds.h
# $(obj-perf)/util for generated bison/flex headers
ifneq ($(OUTPUT),)
CFLAGS += -I$(obj-perf)/util
CFLAGS += -I$(obj-perf)
endif
CFLAGS += -I$(src-perf)/util
CFLAGS += -I$(src-perf)
CFLAGS += -I$(LIB_INCLUDE)
CFLAGS += -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE
ifndef NO_BIONIC
$(call feature_check,bionic)
ifeq ($(feature-bionic), 1)
BIONIC := 1
EXTLIBS := $(filter-out -lrt,$(EXTLIBS))
EXTLIBS := $(filter-out -lpthread,$(EXTLIBS))
endif
endif
ifdef NO_LIBELF
NO_DWARF := 1
NO_DEMANGLE := 1
NO_LIBUNWIND := 1
else
ifeq ($(feature-libelf), 0)
ifeq ($(feature-glibc), 1)
LIBC_SUPPORT := 1
endif
ifeq ($(BIONIC),1)
LIBC_SUPPORT := 1
endif
ifeq ($(LIBC_SUPPORT),1)
msg := $(warning No libelf found, disables 'probe' tool, please install elfutils-libelf-devel/libelf-dev);
NO_LIBELF := 1
NO_DWARF := 1
NO_DEMANGLE := 1
else
msg := $(error No gnu/libc-version.h found, please install glibc-dev[el]/glibc-static);
endif
else
# for linking with debug library, run like:
# make DEBUG=1 LIBDW_DIR=/opt/libdw/
ifdef LIBDW_DIR
LIBDW_CFLAGS := -I$(LIBDW_DIR)/include
LIBDW_LDFLAGS := -L$(LIBDW_DIR)/lib
endif
ifneq ($(feature-dwarf), 1)
msg := $(warning No libdw.h found or old libdw.h found or elfutils is older than 0.138, disables dwarf support. Please install new elfutils-devel/libdw-dev);
NO_DWARF := 1
endif # Dwarf support
endif # libelf support
endif # NO_LIBELF
ifndef NO_LIBELF
CFLAGS += -DHAVE_LIBELF_SUPPORT
ifeq ($(feature-libelf-mmap), 1)
CFLAGS += -DHAVE_LIBELF_MMAP_SUPPORT
endif
ifeq ($(feature-libelf-getphdrnum), 1)
CFLAGS += -DHAVE_ELF_GETPHDRNUM_SUPPORT
endif
# include ARCH specific config
-include $(src-perf)/arch/$(ARCH)/Makefile
ifndef NO_DWARF
ifeq ($(origin PERF_HAVE_DWARF_REGS), undefined)
msg := $(warning DWARF register mappings have not been defined for architecture $(ARCH), DWARF support disabled);
NO_DWARF := 1
else
CFLAGS += -DHAVE_DWARF_SUPPORT $(LIBDW_CFLAGS)
LDFLAGS += $(LIBDW_LDFLAGS)
EXTLIBS += -lelf -ldw
endif # PERF_HAVE_DWARF_REGS
endif # NO_DWARF
endif # NO_LIBELF
ifeq ($(LIBUNWIND_LIBS),)
NO_LIBUNWIND := 1
endif
ifndef NO_LIBUNWIND
#
# For linking with debug library, run like:
#
# make DEBUG=1 LIBUNWIND_DIR=/opt/libunwind/
#
ifdef LIBUNWIND_DIR
LIBUNWIND_CFLAGS := -I$(LIBUNWIND_DIR)/include
LIBUNWIND_LDFLAGS := -L$(LIBUNWIND_DIR)/lib
endif
ifneq ($(feature-libunwind), 1)
Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm Pull ARM updates from Russell King: "Included in this series are: 1. BE8 (modern big endian) changes for ARM from Ben Dooks 2. big.Little support from Nicolas Pitre and Dave Martin 3. support for LPAE systems with all system memory above 4GB 4. Perf updates from Will Deacon 5. Additional prefetching and other performance improvements from Will. 6. Neon-optimised AES implementation fro Ard. 7. A number of smaller fixes scattered around the place. There is a rather horrid merge conflict in tools/perf - I was never notified of the conflict because it originally occurred between Will's tree and other stuff. Consequently I have a resolution which Will forwarded me, which I'll forward on immediately after sending this mail. The other notable thing is I'm expecting some build breakage in the crypto stuff on ARM only with Ard's AES patches. These were merged into a stable git branch which others had already pulled, so there's little I can do about this. The problem is caused because these patches have a dependency on some code in the crypto git tree - I tried requesting a branch I can pull to resolve these, and all I got each time from the crypto people was "we'll revert our patches then" which would only make things worse since I still don't have the dependent patches. I've no idea what's going on there or how to resolve that, and since I can't split these patches from the rest of this pull request, I'm rather stuck with pushing this as-is or reverting Ard's patches. Since it should "come out in the wash" I've left them in - the only build problems they seem to cause at the moment are with randconfigs, and since it's a new feature anyway. However, if by -rc1 the dependencies aren't in, I think it'd be best to revert Ard's patches" I resolved the perf conflict roughly as per the patch sent by Russell, but there may be some differences. Any errors are likely mine. Let's see how the crypto issues work out.. * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (110 commits) ARM: 7868/1: arm/arm64: remove atomic_clear_mask() in "include/asm/atomic.h" ARM: 7867/1: include: asm: use 'int' instead of 'unsigned long' for 'oldval' in atomic_cmpxchg(). ARM: 7866/1: include: asm: use 'long long' instead of 'u64' within atomic.h ARM: 7871/1: amba: Extend number of IRQS ARM: 7887/1: Don't smp_cross_call() on UP devices in arch_irq_work_raise() ARM: 7872/1: Support arch_irq_work_raise() via self IPIs ARM: 7880/1: Clear the IT state independent of the Thumb-2 mode ARM: 7878/1: nommu: Implement dummy early_paging_init() ARM: 7876/1: clear Thumb-2 IT state on exception handling ARM: 7874/2: bL_switcher: Remove cpu_hotplug_driver_{lock,unlock}() ARM: footbridge: fix build warnings for netwinder ARM: 7873/1: vfp: clear vfp_current_hw_state for dying cpu ARM: fix misplaced arch_virt_to_idmap() ARM: 7848/1: mcpm: Implement cpu_kill() to synchronise on powerdown ARM: 7847/1: mcpm: Factor out logical-to-physical CPU translation ARM: 7869/1: remove unused XSCALE_PMU Kconfig param ARM: 7864/1: Handle 64-bit memory in case of 32-bit phys_addr_t ARM: 7863/1: Let arm_add_memory() always use 64-bit arguments ARM: 7862/1: pcpu: replace __get_cpu_var_uses ARM: 7861/1: cacheflush: consolidate single-CPU ARMv7 cache disabling code ...
2013-11-14 07:51:29 +08:00
msg := $(warning No libunwind found, disabling post unwind support. Please install libunwind-dev[el] >= 1.1);
NO_LIBUNWIND := 1
Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm Pull ARM updates from Russell King: "Included in this series are: 1. BE8 (modern big endian) changes for ARM from Ben Dooks 2. big.Little support from Nicolas Pitre and Dave Martin 3. support for LPAE systems with all system memory above 4GB 4. Perf updates from Will Deacon 5. Additional prefetching and other performance improvements from Will. 6. Neon-optimised AES implementation fro Ard. 7. A number of smaller fixes scattered around the place. There is a rather horrid merge conflict in tools/perf - I was never notified of the conflict because it originally occurred between Will's tree and other stuff. Consequently I have a resolution which Will forwarded me, which I'll forward on immediately after sending this mail. The other notable thing is I'm expecting some build breakage in the crypto stuff on ARM only with Ard's AES patches. These were merged into a stable git branch which others had already pulled, so there's little I can do about this. The problem is caused because these patches have a dependency on some code in the crypto git tree - I tried requesting a branch I can pull to resolve these, and all I got each time from the crypto people was "we'll revert our patches then" which would only make things worse since I still don't have the dependent patches. I've no idea what's going on there or how to resolve that, and since I can't split these patches from the rest of this pull request, I'm rather stuck with pushing this as-is or reverting Ard's patches. Since it should "come out in the wash" I've left them in - the only build problems they seem to cause at the moment are with randconfigs, and since it's a new feature anyway. However, if by -rc1 the dependencies aren't in, I think it'd be best to revert Ard's patches" I resolved the perf conflict roughly as per the patch sent by Russell, but there may be some differences. Any errors are likely mine. Let's see how the crypto issues work out.. * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (110 commits) ARM: 7868/1: arm/arm64: remove atomic_clear_mask() in "include/asm/atomic.h" ARM: 7867/1: include: asm: use 'int' instead of 'unsigned long' for 'oldval' in atomic_cmpxchg(). ARM: 7866/1: include: asm: use 'long long' instead of 'u64' within atomic.h ARM: 7871/1: amba: Extend number of IRQS ARM: 7887/1: Don't smp_cross_call() on UP devices in arch_irq_work_raise() ARM: 7872/1: Support arch_irq_work_raise() via self IPIs ARM: 7880/1: Clear the IT state independent of the Thumb-2 mode ARM: 7878/1: nommu: Implement dummy early_paging_init() ARM: 7876/1: clear Thumb-2 IT state on exception handling ARM: 7874/2: bL_switcher: Remove cpu_hotplug_driver_{lock,unlock}() ARM: footbridge: fix build warnings for netwinder ARM: 7873/1: vfp: clear vfp_current_hw_state for dying cpu ARM: fix misplaced arch_virt_to_idmap() ARM: 7848/1: mcpm: Implement cpu_kill() to synchronise on powerdown ARM: 7847/1: mcpm: Factor out logical-to-physical CPU translation ARM: 7869/1: remove unused XSCALE_PMU Kconfig param ARM: 7864/1: Handle 64-bit memory in case of 32-bit phys_addr_t ARM: 7863/1: Let arm_add_memory() always use 64-bit arguments ARM: 7862/1: pcpu: replace __get_cpu_var_uses ARM: 7861/1: cacheflush: consolidate single-CPU ARMv7 cache disabling code ...
2013-11-14 07:51:29 +08:00
else
ifeq ($(ARCH),arm)
$(call feature_check,libunwind-debug-frame)
ifneq ($(feature-libunwind-debug-frame), 1)
msg := $(warning No debug_frame support found in libunwind);
CFLAGS += -DNO_LIBUNWIND_DEBUG_FRAME
endif
else
# non-ARM has no dwarf_find_debug_frame() function:
Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm Pull ARM updates from Russell King: "Included in this series are: 1. BE8 (modern big endian) changes for ARM from Ben Dooks 2. big.Little support from Nicolas Pitre and Dave Martin 3. support for LPAE systems with all system memory above 4GB 4. Perf updates from Will Deacon 5. Additional prefetching and other performance improvements from Will. 6. Neon-optimised AES implementation fro Ard. 7. A number of smaller fixes scattered around the place. There is a rather horrid merge conflict in tools/perf - I was never notified of the conflict because it originally occurred between Will's tree and other stuff. Consequently I have a resolution which Will forwarded me, which I'll forward on immediately after sending this mail. The other notable thing is I'm expecting some build breakage in the crypto stuff on ARM only with Ard's AES patches. These were merged into a stable git branch which others had already pulled, so there's little I can do about this. The problem is caused because these patches have a dependency on some code in the crypto git tree - I tried requesting a branch I can pull to resolve these, and all I got each time from the crypto people was "we'll revert our patches then" which would only make things worse since I still don't have the dependent patches. I've no idea what's going on there or how to resolve that, and since I can't split these patches from the rest of this pull request, I'm rather stuck with pushing this as-is or reverting Ard's patches. Since it should "come out in the wash" I've left them in - the only build problems they seem to cause at the moment are with randconfigs, and since it's a new feature anyway. However, if by -rc1 the dependencies aren't in, I think it'd be best to revert Ard's patches" I resolved the perf conflict roughly as per the patch sent by Russell, but there may be some differences. Any errors are likely mine. Let's see how the crypto issues work out.. * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (110 commits) ARM: 7868/1: arm/arm64: remove atomic_clear_mask() in "include/asm/atomic.h" ARM: 7867/1: include: asm: use 'int' instead of 'unsigned long' for 'oldval' in atomic_cmpxchg(). ARM: 7866/1: include: asm: use 'long long' instead of 'u64' within atomic.h ARM: 7871/1: amba: Extend number of IRQS ARM: 7887/1: Don't smp_cross_call() on UP devices in arch_irq_work_raise() ARM: 7872/1: Support arch_irq_work_raise() via self IPIs ARM: 7880/1: Clear the IT state independent of the Thumb-2 mode ARM: 7878/1: nommu: Implement dummy early_paging_init() ARM: 7876/1: clear Thumb-2 IT state on exception handling ARM: 7874/2: bL_switcher: Remove cpu_hotplug_driver_{lock,unlock}() ARM: footbridge: fix build warnings for netwinder ARM: 7873/1: vfp: clear vfp_current_hw_state for dying cpu ARM: fix misplaced arch_virt_to_idmap() ARM: 7848/1: mcpm: Implement cpu_kill() to synchronise on powerdown ARM: 7847/1: mcpm: Factor out logical-to-physical CPU translation ARM: 7869/1: remove unused XSCALE_PMU Kconfig param ARM: 7864/1: Handle 64-bit memory in case of 32-bit phys_addr_t ARM: 7863/1: Let arm_add_memory() always use 64-bit arguments ARM: 7862/1: pcpu: replace __get_cpu_var_uses ARM: 7861/1: cacheflush: consolidate single-CPU ARMv7 cache disabling code ...
2013-11-14 07:51:29 +08:00
CFLAGS += -DNO_LIBUNWIND_DEBUG_FRAME
endif
endif
endif
ifndef NO_LIBUNWIND
CFLAGS += -DHAVE_LIBUNWIND_SUPPORT
EXTLIBS += $(LIBUNWIND_LIBS)
CFLAGS += $(LIBUNWIND_CFLAGS)
LDFLAGS += $(LIBUNWIND_LDFLAGS)
endif
ifndef NO_LIBAUDIT
ifneq ($(feature-libaudit), 1)
msg := $(warning No libaudit.h found, disables 'trace' tool, please install audit-libs-devel or libaudit-dev);
NO_LIBAUDIT := 1
else
CFLAGS += -DHAVE_LIBAUDIT_SUPPORT
EXTLIBS += -laudit
endif
endif
ifdef NO_NEWT
NO_SLANG=1
endif
ifndef NO_SLANG
ifneq ($(feature-libslang), 1)
msg := $(warning slang not found, disables TUI support. Please install slang-devel or libslang-dev);
NO_SLANG := 1
else
# Fedora has /usr/include/slang/slang.h, but ubuntu /usr/include/slang.h
CFLAGS += -I/usr/include/slang
CFLAGS += -DHAVE_SLANG_SUPPORT
EXTLIBS += -lslang
endif
endif
ifndef NO_GTK2
FLAGS_GTK2=$(CFLAGS) $(LDFLAGS) $(EXTLIBS) $(shell pkg-config --libs --cflags gtk+-2.0 2>/dev/null)
ifneq ($(feature-gtk2), 1)
msg := $(warning GTK2 not found, disables GTK2 support. Please install gtk2-devel or libgtk2.0-dev);
NO_GTK2 := 1
else
ifeq ($(feature-gtk2-infobar), 1)
GTK_CFLAGS := -DHAVE_GTK_INFO_BAR_SUPPORT
endif
CFLAGS += -DHAVE_GTK2_SUPPORT
GTK_CFLAGS += $(shell pkg-config --cflags gtk+-2.0 2>/dev/null)
GTK_LIBS := $(shell pkg-config --libs gtk+-2.0 2>/dev/null)
EXTLIBS += -ldl
endif
endif
grep-libs = $(filter -l%,$(1))
strip-libs = $(filter-out -l%,$(1))
ifdef NO_LIBPERL
CFLAGS += -DNO_LIBPERL
else
PERL_EMBED_LDOPTS = $(shell perl -MExtUtils::Embed -e ldopts 2>/dev/null)
PERL_EMBED_LDFLAGS = $(call strip-libs,$(PERL_EMBED_LDOPTS))
PERL_EMBED_LIBADD = $(call grep-libs,$(PERL_EMBED_LDOPTS))
PERL_EMBED_CCOPTS = `perl -MExtUtils::Embed -e ccopts 2>/dev/null`
FLAGS_PERL_EMBED=$(PERL_EMBED_CCOPTS) $(PERL_EMBED_LDOPTS)
ifneq ($(feature-libperl), 1)
CFLAGS += -DNO_LIBPERL
NO_LIBPERL := 1
else
LDFLAGS += $(PERL_EMBED_LDFLAGS)
EXTLIBS += $(PERL_EMBED_LIBADD)
endif
endif
ifeq ($(feature-timerfd), 1)
CFLAGS += -DHAVE_TIMERFD_SUPPORT
else
msg := $(warning No timerfd support. Disables 'perf kvm stat live');
endif
disable-python = $(eval $(disable-python_code))
define disable-python_code
CFLAGS += -DNO_LIBPYTHON
$(if $(1),$(warning No $(1) was found))
$(warning Python support will not be built)
NO_LIBPYTHON := 1
endef
override PYTHON := \
$(call get-executable-or-default,PYTHON,python)
ifndef PYTHON
$(call disable-python,python interpreter)
else
PYTHON_WORD := $(call shell-wordify,$(PYTHON))
ifdef NO_LIBPYTHON
$(call disable-python)
else
override PYTHON_CONFIG := \
$(call get-executable-or-default,PYTHON_CONFIG,$(PYTHON)-config)
ifndef PYTHON_CONFIG
$(call disable-python,python-config tool)
else
PYTHON_CONFIG_SQ := $(call shell-sq,$(PYTHON_CONFIG))
PYTHON_EMBED_LDOPTS := $(shell $(PYTHON_CONFIG_SQ) --ldflags 2>/dev/null)
PYTHON_EMBED_LDFLAGS := $(call strip-libs,$(PYTHON_EMBED_LDOPTS))
PYTHON_EMBED_LIBADD := $(call grep-libs,$(PYTHON_EMBED_LDOPTS))
PYTHON_EMBED_CCOPTS := $(shell $(PYTHON_CONFIG_SQ) --cflags 2>/dev/null)
FLAGS_PYTHON_EMBED := $(PYTHON_EMBED_CCOPTS) $(PYTHON_EMBED_LDOPTS)
ifneq ($(feature-libpython), 1)
$(call disable-python,Python.h (for Python 2.x))
else
ifneq ($(feature-libpython-version), 1)
$(warning Python 3 is not yet supported; please set)
$(warning PYTHON and/or PYTHON_CONFIG appropriately.)
$(warning If you also have Python 2 installed, then)
$(warning try something like:)
$(warning $(and ,))
$(warning $(and ,) make PYTHON=python2)
$(warning $(and ,))
$(warning Otherwise, disable Python support entirely:)
$(warning $(and ,))
$(warning $(and ,) make NO_LIBPYTHON=1)
$(warning $(and ,))
$(error $(and ,))
else
LDFLAGS += $(PYTHON_EMBED_LDFLAGS)
EXTLIBS += $(PYTHON_EMBED_LIBADD)
LANG_BINDINGS += $(obj-perf)python/perf.so
endif
endif
endif
endif
endif
ifeq ($(feature-libbfd), 1)
EXTLIBS += -lbfd
endif
ifdef NO_DEMANGLE
CFLAGS += -DNO_DEMANGLE
else
ifdef HAVE_CPLUS_DEMANGLE_SUPPORT
EXTLIBS += -liberty
CFLAGS += -DHAVE_CPLUS_DEMANGLE_SUPPORT
else
ifneq ($(feature-libbfd), 1)
$(call feature_check,liberty)
ifeq ($(feature-liberty), 1)
EXTLIBS += -lbfd -liberty
else
$(call feature_check,liberty-z)
ifeq ($(feature-liberty-z), 1)
EXTLIBS += -lbfd -liberty -lz
else
$(call feature_check,cplus-demangle)
ifeq ($(feature-cplus-demangle), 1)
EXTLIBS += -liberty
CFLAGS += -DHAVE_CPLUS_DEMANGLE_SUPPORT
else
msg := $(warning No bfd.h/libbfd found, install binutils-dev[el]/zlib-static to gain symbol demangling)
CFLAGS += -DNO_DEMANGLE
endif
endif
endif
endif
endif
endif
ifneq ($(filter -lbfd,$(EXTLIBS)),)
CFLAGS += -DHAVE_LIBBFD_SUPPORT
endif
ifndef NO_ON_EXIT
ifeq ($(feature-on-exit), 1)
CFLAGS += -DHAVE_ON_EXIT_SUPPORT
endif
endif
ifndef NO_BACKTRACE
ifeq ($(feature-backtrace), 1)
CFLAGS += -DHAVE_BACKTRACE_SUPPORT
endif
endif
ifndef NO_LIBNUMA
ifeq ($(feature-libnuma), 0)
msg := $(warning No numa.h found, disables 'perf bench numa mem' benchmark, please install numactl-devel/libnuma-devel/libnuma-dev);
NO_LIBNUMA := 1
else
CFLAGS += -DHAVE_LIBNUMA_SUPPORT
EXTLIBS += -lnuma
endif
endif
# Among the variables below, these:
# perfexecdir
# template_dir
# mandir
# infodir
# htmldir
# ETC_PERFCONFIG (but not sysconfdir)
# can be specified as a relative path some/where/else;
# this is interpreted as relative to $(prefix) and "perf" at
# runtime figures out where they are based on the path to the executable.
# This can help installing the suite in a relocatable way.
# Make the path relative to DESTDIR, not to prefix
ifndef DESTDIR
prefix = $(HOME)
endif
bindir_relative = bin
bindir = $(prefix)/$(bindir_relative)
mandir = share/man
infodir = share/info
perfexecdir = libexec/perf-core
sharedir = $(prefix)/share
template_dir = share/perf-core/templates
htmldir = share/doc/perf-doc
ifeq ($(prefix),/usr)
sysconfdir = /etc
ETC_PERFCONFIG = $(sysconfdir)/perfconfig
else
sysconfdir = $(prefix)/etc
ETC_PERFCONFIG = etc/perfconfig
endif
ifeq ($(IS_X86_64),1)
lib = lib64
else
lib = lib
endif
libdir = $(prefix)/$(lib)
# Shell quote (do not use $(call) to accommodate ancient setups);
ETC_PERFCONFIG_SQ = $(subst ','\'',$(ETC_PERFCONFIG))
DESTDIR_SQ = $(subst ','\'',$(DESTDIR))
bindir_SQ = $(subst ','\'',$(bindir))
mandir_SQ = $(subst ','\'',$(mandir))
infodir_SQ = $(subst ','\'',$(infodir))
perfexecdir_SQ = $(subst ','\'',$(perfexecdir))
template_dir_SQ = $(subst ','\'',$(template_dir))
htmldir_SQ = $(subst ','\'',$(htmldir))
prefix_SQ = $(subst ','\'',$(prefix))
sysconfdir_SQ = $(subst ','\'',$(sysconfdir))
libdir_SQ = $(subst ','\'',$(libdir))
ifneq ($(filter /%,$(firstword $(perfexecdir))),)
perfexec_instdir = $(perfexecdir)
else
perfexec_instdir = $(prefix)/$(perfexecdir)
endif
perfexec_instdir_SQ = $(subst ','\'',$(perfexec_instdir))