OpenCloudOS-Kernel/drivers/gpu/drm/i915/i915_gem_execbuffer.c

1777 lines
47 KiB
C
Raw Normal View History

/*
* Copyright © 2008,2010 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*
* Authors:
* Eric Anholt <eric@anholt.net>
* Chris Wilson <chris@chris-wilson.co.uk>
*
*/
#include <drm/drmP.h>
#include <drm/i915_drm.h>
#include "i915_drv.h"
#include "i915_trace.h"
#include "intel_drv.h"
#include <linux/dma_remapping.h>
#define __EXEC_OBJECT_HAS_PIN (1<<31)
#define __EXEC_OBJECT_HAS_FENCE (1<<30)
#define __EXEC_OBJECT_NEEDS_MAP (1<<29)
drm/i915: Prevent negative relocation deltas from wrapping This is pure evil. Userspace, I'm looking at you SNA, repacks batch buffers on the fly after generation as they are being passed to the kernel for execution. These batches also contain self-referenced relocations as a single buffer encompasses the state commands, kernels, vertices and sampler. During generation the buffers are placed at known offsets within the full batch, and then the relocation deltas (as passed to the kernel) are tweaked as the batch is repacked into a smaller buffer. This means that userspace is passing negative relocations deltas, which subsequently wrap to large values if the batch is at a low address. The GPU hangs when it then tries to use the large value as a base for its address offsets, rather than wrapping back to the real value (as one would hope). As the GPU uses positive offsets from the base, we can treat the relocation address as the minimum address read by the GPU. For the upper bound, we trust that userspace will not read beyond the end of the buffer. So, how do we fix negative relocations from wrapping? We can either check that every relocation looks valid when we write it, and then position each object such that we prevent the offset wraparound, or we just special-case the self-referential behaviour of SNA and force all batches to be above 256k. Daniel prefers the latter approach. This fixes a GPU hang when it tries to use an address (relocation + offset) greater than the GTT size. The issue would occur quite easily with full-ppgtt as each fd gets its own VM space, so low offsets would often be handed out. However, with the rearrangement of the low GTT due to capturing the BIOS framebuffer, it is already affecting kernels 3.15 onwards. I think only IVB+ is susceptible to this bug, but the workaround should only kick in rarely, so it seems sensible to always apply it. v3: Use a bias for batch buffers to prevent small negative delta relocations from wrapping. v4 from Daniel: - s/BIAS/BATCH_OFFSET_BIAS/ - Extract eb_vma_misplaced/i915_vma_misplaced since the conditions were growing rather cumbersome. - Add a comment to eb_get_batch explaining why we do this. - Apply the batch offset bias everywhere but mention that we've only observed it on gen7 gpus. - Drop PIN_OFFSET_FIX for now, that slipped in from a feature patch. v5: Add static to eb_get_batch, spotted by 0-day tester. Testcase: igt/gem_bad_reloc Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78533 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v3) Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-23 14:48:08 +08:00
#define __EXEC_OBJECT_NEEDS_BIAS (1<<28)
#define BATCH_OFFSET_BIAS (256*1024)
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
struct eb_vmas {
struct list_head vmas;
int and;
union {
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
struct i915_vma *lut[0];
struct hlist_head buckets[0];
};
};
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
static struct eb_vmas *
eb_create(struct drm_i915_gem_execbuffer2 *args)
{
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
struct eb_vmas *eb = NULL;
if (args->flags & I915_EXEC_HANDLE_LUT) {
unsigned size = args->buffer_count;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
size *= sizeof(struct i915_vma *);
size += sizeof(struct eb_vmas);
eb = kmalloc(size, GFP_TEMPORARY | __GFP_NOWARN | __GFP_NORETRY);
}
if (eb == NULL) {
unsigned size = args->buffer_count;
unsigned count = PAGE_SIZE / sizeof(struct hlist_head) / 2;
BUILD_BUG_ON_NOT_POWER_OF_2(PAGE_SIZE / sizeof(struct hlist_head));
while (count > 2*size)
count >>= 1;
eb = kzalloc(count*sizeof(struct hlist_head) +
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
sizeof(struct eb_vmas),
GFP_TEMPORARY);
if (eb == NULL)
return eb;
eb->and = count - 1;
} else
eb->and = -args->buffer_count;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
INIT_LIST_HEAD(&eb->vmas);
return eb;
}
static void
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
eb_reset(struct eb_vmas *eb)
{
if (eb->and >= 0)
memset(eb->buckets, 0, (eb->and+1)*sizeof(struct hlist_head));
}
static int
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
eb_lookup_vmas(struct eb_vmas *eb,
struct drm_i915_gem_exec_object2 *exec,
const struct drm_i915_gem_execbuffer2 *args,
struct i915_address_space *vm,
struct drm_file *file)
{
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
struct drm_i915_gem_object *obj;
struct list_head objects;
int i, ret;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
INIT_LIST_HEAD(&objects);
spin_lock(&file->table_lock);
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
/* Grab a reference to the object and release the lock so we can lookup
* or create the VMA without using GFP_ATOMIC */
for (i = 0; i < args->buffer_count; i++) {
obj = to_intel_bo(idr_find(&file->object_idr, exec[i].handle));
if (obj == NULL) {
spin_unlock(&file->table_lock);
DRM_DEBUG("Invalid object handle %d at index %d\n",
exec[i].handle, i);
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
ret = -ENOENT;
goto err;
}
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
if (!list_empty(&obj->obj_exec_link)) {
spin_unlock(&file->table_lock);
DRM_DEBUG("Object %p [handle %d, index %d] appears more than once in object list\n",
obj, exec[i].handle, i);
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
ret = -EINVAL;
goto err;
}
drm_gem_object_reference(&obj->base);
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
list_add_tail(&obj->obj_exec_link, &objects);
}
spin_unlock(&file->table_lock);
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
i = 0;
while (!list_empty(&objects)) {
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
struct i915_vma *vma;
drm/i915: Create bind/unbind abstraction for VMAs To sum up what goes on here, we abstract the vma binding, similarly to the previous object binding. This helps for distinguishing legacy binding, versus modern binding. To keep the code churn as minimal as possible, I am leaving in insert_entries(). It serves as the per platform pte writing basically. bind_vma and insert_entries do share a lot of similarities, and I did have designs to combine the two, but as mentioned already... too much churn in an already massive patchset. What follows are the 3 commits which existed discretely in the original submissions. Upon rebasing on Broadwell support, it became clear that separation was not good, and only made for more error prone code. Below are the 3 commit messages with all their history. drm/i915: Add bind/unbind object functions to VMA drm/i915: Use the new vm [un]bind functions drm/i915: reduce vm->insert_entries() usage drm/i915: Add bind/unbind object functions to VMA As we plumb the code with more VM information, it has become more obvious that the easiest way to deal with bind and unbind is to simply put the function pointers in the vm, and let those choose the correct way to handle the page table updates. This change allows many places in the code to simply be vm->bind, and not have to worry about distinguishing PPGTT vs GGTT. Notice that this patch has no impact on functionality. I've decided to save the actual change until the next patch because I think it's easier to review that way. I'm happy to squash the two, or let Daniel do it on merge. v2: Make ggtt handle the quirky aliasing ppgtt Add flags to bind object to support above Don't ever call bind/unbind directly for PPGTT until we have real, full PPGTT (use NULLs to assert this) Make sure we rebind the ggtt if there already is a ggtt binding. This happens on set cache levels. Use VMA for bind/unbind (Daniel, Ben) v3: Reorganize ggtt_vma_bind to be more concise and easier to read (Ville). Change logic in unbind to only unbind ggtt when there is a global mapping, and to remove a redundant check if the aliasing ppgtt exists. v4: Make the bind function a bit smarter about the cache levels to avoid unnecessary multiple remaps. "I accept it is a wart, I think unifying the pin_vma / bind_vma could be unified later" (Chris) Removed the git notes, and put version info here. (Daniel) v5: Update the comment to not suck (Chris) v6: Move bind/unbind to the VMA. It makes more sense in the VMA structure (always has, but I was previously lazy). With this change, it will allow us to keep a distinct insert_entries. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: Use the new vm [un]bind functions Building on the last patch which created the new function pointers in the VM for bind/unbind, here we actually put those new function pointers to use. Split out as a separate patch to aid in review. I'm fine with squashing into the previous patch if people request it. v2: Updated to address the smart ggtt which can do aliasing as needed Make sure we bind to global gtt when mappable and fenceable. I thought we could get away without this initialy, but we cannot. v3: Make the global GTT binding explicitly use the ggtt VM for bind_vma(). While at it, use the new ggtt_vma helper (Chris) At this point the original mailing list thread diverges. ie. v4^: use target_obj instead of obj for gen6 relocate_entry vma->bind_vma() can be called safely during pin. So simply do that instead of the complicated conditionals. Don't restore PPGTT bound objects on resume path Bug fix in resume path for globally bound Bos Properly handle secure dispatch Rebased on vma bind/unbind conversion Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: reduce vm->insert_entries() usage FKA: drm/i915: eliminate vm->insert_entries() With bind/unbind function pointers in place, we no longer need insert_entries. We could, and want, to remove clear_range, however it's not totally easy at this point. Since it's used in a couple of place still that don't only deal in objects: setup, ppgtt init, and restore gtt mappings. v2: Don't actually remove insert_entries, just limit its usage. It will be useful when we introduce gen8. It will always be called from the vma bind/unbind. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-07 06:10:56 +08:00
obj = list_first_entry(&objects,
struct drm_i915_gem_object,
obj_exec_link);
/*
* NOTE: We can leak any vmas created here when something fails
* later on. But that's no issue since vma_unbind can deal with
* vmas which are not actually bound. And since only
* lookup_or_create exists as an interface to get at the vma
* from the (obj, vm) we don't run the risk of creating
* duplicated vmas for the same vm.
*/
vma = i915_gem_obj_lookup_or_create_vma(obj, vm);
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
if (IS_ERR(vma)) {
DRM_DEBUG("Failed to lookup VMA\n");
ret = PTR_ERR(vma);
goto err;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
}
/* Transfer ownership from the objects list to the vmas list. */
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
list_add_tail(&vma->exec_list, &eb->vmas);
list_del_init(&obj->obj_exec_link);
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
vma->exec_entry = &exec[i];
if (eb->and < 0) {
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
eb->lut[i] = vma;
} else {
uint32_t handle = args->flags & I915_EXEC_HANDLE_LUT ? i : exec[i].handle;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
vma->exec_handle = handle;
hlist_add_head(&vma->exec_node,
&eb->buckets[handle & eb->and]);
}
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
++i;
}
return 0;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
err:
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
while (!list_empty(&objects)) {
obj = list_first_entry(&objects,
struct drm_i915_gem_object,
obj_exec_link);
list_del_init(&obj->obj_exec_link);
drm_gem_object_unreference(&obj->base);
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
}
/*
* Objects already transfered to the vmas list will be unreferenced by
* eb_destroy.
*/
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
return ret;
}
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
static struct i915_vma *eb_get_vma(struct eb_vmas *eb, unsigned long handle)
{
if (eb->and < 0) {
if (handle >= -eb->and)
return NULL;
return eb->lut[handle];
} else {
struct hlist_head *head;
struct hlist_node *node;
head = &eb->buckets[handle & eb->and];
hlist_for_each(node, head) {
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
struct i915_vma *vma;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
vma = hlist_entry(node, struct i915_vma, exec_node);
if (vma->exec_handle == handle)
return vma;
}
return NULL;
}
}
static void
i915_gem_execbuffer_unreserve_vma(struct i915_vma *vma)
{
struct drm_i915_gem_exec_object2 *entry;
struct drm_i915_gem_object *obj = vma->obj;
if (!drm_mm_node_allocated(&vma->node))
return;
entry = vma->exec_entry;
if (entry->flags & __EXEC_OBJECT_HAS_FENCE)
i915_gem_object_unpin_fence(obj);
if (entry->flags & __EXEC_OBJECT_HAS_PIN)
vma->pin_count--;
entry->flags &= ~(__EXEC_OBJECT_HAS_FENCE | __EXEC_OBJECT_HAS_PIN);
}
static void eb_destroy(struct eb_vmas *eb)
{
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
while (!list_empty(&eb->vmas)) {
struct i915_vma *vma;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
vma = list_first_entry(&eb->vmas,
struct i915_vma,
exec_list);
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
list_del_init(&vma->exec_list);
i915_gem_execbuffer_unreserve_vma(vma);
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
drm_gem_object_unreference(&vma->obj->base);
}
kfree(eb);
}
static inline int use_cpu_reloc(struct drm_i915_gem_object *obj)
{
return (HAS_LLC(obj->base.dev) ||
obj->base.write_domain == I915_GEM_DOMAIN_CPU ||
obj->cache_level != I915_CACHE_NONE);
}
static int
relocate_entry_cpu(struct drm_i915_gem_object *obj,
struct drm_i915_gem_relocation_entry *reloc,
uint64_t target_offset)
{
struct drm_device *dev = obj->base.dev;
uint32_t page_offset = offset_in_page(reloc->offset);
uint64_t delta = reloc->delta + target_offset;
char *vaddr;
int ret;
ret = i915_gem_object_set_to_cpu_domain(obj, true);
if (ret)
return ret;
vaddr = kmap_atomic(i915_gem_object_get_page(obj,
reloc->offset >> PAGE_SHIFT));
*(uint32_t *)(vaddr + page_offset) = lower_32_bits(delta);
if (INTEL_INFO(dev)->gen >= 8) {
page_offset = offset_in_page(page_offset + sizeof(uint32_t));
if (page_offset == 0) {
kunmap_atomic(vaddr);
vaddr = kmap_atomic(i915_gem_object_get_page(obj,
(reloc->offset + sizeof(uint32_t)) >> PAGE_SHIFT));
}
*(uint32_t *)(vaddr + page_offset) = upper_32_bits(delta);
}
kunmap_atomic(vaddr);
return 0;
}
static int
relocate_entry_gtt(struct drm_i915_gem_object *obj,
struct drm_i915_gem_relocation_entry *reloc,
uint64_t target_offset)
{
struct drm_device *dev = obj->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
uint64_t delta = reloc->delta + target_offset;
uint64_t offset;
void __iomem *reloc_page;
int ret;
ret = i915_gem_object_set_to_gtt_domain(obj, true);
if (ret)
return ret;
ret = i915_gem_object_put_fence(obj);
if (ret)
return ret;
/* Map the page containing the relocation we're going to perform. */
offset = i915_gem_obj_ggtt_offset(obj);
offset += reloc->offset;
reloc_page = io_mapping_map_atomic_wc(dev_priv->gtt.mappable,
offset & PAGE_MASK);
iowrite32(lower_32_bits(delta), reloc_page + offset_in_page(offset));
if (INTEL_INFO(dev)->gen >= 8) {
offset += sizeof(uint32_t);
if (offset_in_page(offset) == 0) {
io_mapping_unmap_atomic(reloc_page);
reloc_page =
io_mapping_map_atomic_wc(dev_priv->gtt.mappable,
offset);
}
iowrite32(upper_32_bits(delta),
reloc_page + offset_in_page(offset));
}
io_mapping_unmap_atomic(reloc_page);
return 0;
}
drm/i915: Fallback to using CPU relocations for large batch buffers If the batch buffer is too large to fit into the aperture and we need a GTT mapping for relocations, we currently fail. This only applies to a subset of machines for a subset of environments, quite undesirable. We can simply check after failing to insert the batch into the GTT as to whether we only need a mappable binding for relocation and, if so, we can revert to using a non-mappable binding and an alternate relocation method. However, using relocate_entry_cpu() is excruciatingly slow for large buffers on non-LLC as the entire buffer requires clflushing before and after the relocation handling. Alternatively, we can implement a third relocation method that only clflushes around the relocation entry. This is still slower than updating through the GTT, so we prefer using the GTT where possible, but is orders of magnitude faster as we typically do not have to then clflush the entire buffer. An alternative idea of using a temporary WC mapping of the backing store is promising (it should be faster than using the GTT itself), but requires fairly extensive arch/x86 support - along the lines of kmap_atomic_prof_pfn() (which is not universally implemented even for x86). Testcase: igt/gem_exec_big #pnv,byt Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88392 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Add a WARN_ONCE for the impossible reloc case and explain in a short comment why we want to avoid ping-pong.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-14 19:20:56 +08:00
static void
clflush_write32(void *addr, uint32_t value)
{
/* This is not a fast path, so KISS. */
drm_clflush_virt_range(addr, sizeof(uint32_t));
*(uint32_t *)addr = value;
drm_clflush_virt_range(addr, sizeof(uint32_t));
}
static int
relocate_entry_clflush(struct drm_i915_gem_object *obj,
struct drm_i915_gem_relocation_entry *reloc,
uint64_t target_offset)
{
struct drm_device *dev = obj->base.dev;
uint32_t page_offset = offset_in_page(reloc->offset);
uint64_t delta = (int)reloc->delta + target_offset;
char *vaddr;
int ret;
ret = i915_gem_object_set_to_gtt_domain(obj, true);
if (ret)
return ret;
vaddr = kmap_atomic(i915_gem_object_get_page(obj,
reloc->offset >> PAGE_SHIFT));
clflush_write32(vaddr + page_offset, lower_32_bits(delta));
if (INTEL_INFO(dev)->gen >= 8) {
page_offset = offset_in_page(page_offset + sizeof(uint32_t));
if (page_offset == 0) {
kunmap_atomic(vaddr);
vaddr = kmap_atomic(i915_gem_object_get_page(obj,
(reloc->offset + sizeof(uint32_t)) >> PAGE_SHIFT));
}
clflush_write32(vaddr + page_offset, upper_32_bits(delta));
}
kunmap_atomic(vaddr);
return 0;
}
static int
i915_gem_execbuffer_relocate_entry(struct drm_i915_gem_object *obj,
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
struct eb_vmas *eb,
struct drm_i915_gem_relocation_entry *reloc)
{
struct drm_device *dev = obj->base.dev;
struct drm_gem_object *target_obj;
struct drm_i915_gem_object *target_i915_obj;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
struct i915_vma *target_vma;
uint64_t target_offset;
int ret;
/* we've already hold a reference to all valid objects */
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
target_vma = eb_get_vma(eb, reloc->target_handle);
if (unlikely(target_vma == NULL))
return -ENOENT;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
target_i915_obj = target_vma->obj;
target_obj = &target_vma->obj->base;
target_offset = target_vma->node.start;
/* Sandybridge PPGTT errata: We need a global gtt mapping for MI and
* pipe_control writes because the gpu doesn't properly redirect them
* through the ppgtt for non_secure batchbuffers. */
if (unlikely(IS_GEN6(dev) &&
reloc->write_domain == I915_GEM_DOMAIN_INSTRUCTION &&
drm/i915: Infrastructure for supporting different GGTT views per object Things like reliable GGTT mappings and mirrored 2d-on-3d display will need to map objects into the same address space multiple times. Added a GGTT view concept and linked it with the VMA to distinguish between multiple instances per address space. New objects and GEM functions which do not take this new view as a parameter assume the default of zero (I915_GGTT_VIEW_NORMAL) which preserves the previous behaviour. This now means that objects can have multiple VMA entries so the code which assumed there will only be one also had to be modified. Alternative GGTT views are supposed to borrow DMA addresses from obj->pages which is DMA mapped on first VMA instantiation and unmapped on the last one going away. v2: * Removed per view special casing in i915_gem_ggtt_prepare / finish_object in favour of creating and destroying DMA mappings on first VMA instantiation and last VMA destruction. (Daniel Vetter) * Simplified i915_vma_unbind which does not need to count the GGTT views. (Daniel Vetter) * Also moved obj->map_and_fenceable reset under the same check. * Checkpatch cleanups. v3: * Only retire objects once the last VMA is unbound. v4: * Keep scatter-gather table for alternative views persistent for the lifetime of the VMA. * Propagate binding errors to callers and handle appropriately. v5: * Explicitly look for normal GGTT view in i915_gem_obj_bound to align usage in i915_gem_object_ggtt_unpin. (Michel Thierry) * Change to single if statement in i915_gem_obj_to_ggtt. (Michel Thierry) * Removed stray semi-colon in i915_gem_object_set_cache_level. For: VIZ-4544 Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Michel Thierry <michel.thierry@intel.com> [danvet: Drop hunk from i915_gem_shrink since it's just prettification but upsets a __must_check warning.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-11 01:27:58 +08:00
!(target_vma->bound & GLOBAL_BIND))) {
ret = i915_vma_bind(target_vma, target_i915_obj->cache_level,
GLOBAL_BIND);
if (WARN_ONCE(ret, "Unexpected failure to bind target VMA!"))
return ret;
}
/* Validate that the target is in a valid r/w GPU domain */
if (unlikely(reloc->write_domain & (reloc->write_domain - 1))) {
DRM_DEBUG("reloc with multiple write domains: "
"obj %p target %d offset %d "
"read %08x write %08x",
obj, reloc->target_handle,
(int) reloc->offset,
reloc->read_domains,
reloc->write_domain);
return -EINVAL;
}
if (unlikely((reloc->write_domain | reloc->read_domains)
& ~I915_GEM_GPU_DOMAINS)) {
DRM_DEBUG("reloc with read/write non-GPU domains: "
"obj %p target %d offset %d "
"read %08x write %08x",
obj, reloc->target_handle,
(int) reloc->offset,
reloc->read_domains,
reloc->write_domain);
return -EINVAL;
}
target_obj->pending_read_domains |= reloc->read_domains;
target_obj->pending_write_domain |= reloc->write_domain;
/* If the relocation already has the right value in it, no
* more work needs to be done.
*/
if (target_offset == reloc->presumed_offset)
return 0;
/* Check that the relocation address is valid... */
if (unlikely(reloc->offset >
obj->base.size - (INTEL_INFO(dev)->gen >= 8 ? 8 : 4))) {
DRM_DEBUG("Relocation beyond object bounds: "
"obj %p target %d offset %d size %d.\n",
obj, reloc->target_handle,
(int) reloc->offset,
(int) obj->base.size);
return -EINVAL;
}
if (unlikely(reloc->offset & 3)) {
DRM_DEBUG("Relocation not 4-byte aligned: "
"obj %p target %d offset %d.\n",
obj, reloc->target_handle,
(int) reloc->offset);
return -EINVAL;
}
/* We can't wait for rendering with pagefaults disabled */
if (obj->active && in_atomic())
return -EFAULT;
if (use_cpu_reloc(obj))
ret = relocate_entry_cpu(obj, reloc, target_offset);
drm/i915: Fallback to using CPU relocations for large batch buffers If the batch buffer is too large to fit into the aperture and we need a GTT mapping for relocations, we currently fail. This only applies to a subset of machines for a subset of environments, quite undesirable. We can simply check after failing to insert the batch into the GTT as to whether we only need a mappable binding for relocation and, if so, we can revert to using a non-mappable binding and an alternate relocation method. However, using relocate_entry_cpu() is excruciatingly slow for large buffers on non-LLC as the entire buffer requires clflushing before and after the relocation handling. Alternatively, we can implement a third relocation method that only clflushes around the relocation entry. This is still slower than updating through the GTT, so we prefer using the GTT where possible, but is orders of magnitude faster as we typically do not have to then clflush the entire buffer. An alternative idea of using a temporary WC mapping of the backing store is promising (it should be faster than using the GTT itself), but requires fairly extensive arch/x86 support - along the lines of kmap_atomic_prof_pfn() (which is not universally implemented even for x86). Testcase: igt/gem_exec_big #pnv,byt Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88392 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Add a WARN_ONCE for the impossible reloc case and explain in a short comment why we want to avoid ping-pong.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-14 19:20:56 +08:00
else if (obj->map_and_fenceable)
ret = relocate_entry_gtt(obj, reloc, target_offset);
drm/i915: Fallback to using CPU relocations for large batch buffers If the batch buffer is too large to fit into the aperture and we need a GTT mapping for relocations, we currently fail. This only applies to a subset of machines for a subset of environments, quite undesirable. We can simply check after failing to insert the batch into the GTT as to whether we only need a mappable binding for relocation and, if so, we can revert to using a non-mappable binding and an alternate relocation method. However, using relocate_entry_cpu() is excruciatingly slow for large buffers on non-LLC as the entire buffer requires clflushing before and after the relocation handling. Alternatively, we can implement a third relocation method that only clflushes around the relocation entry. This is still slower than updating through the GTT, so we prefer using the GTT where possible, but is orders of magnitude faster as we typically do not have to then clflush the entire buffer. An alternative idea of using a temporary WC mapping of the backing store is promising (it should be faster than using the GTT itself), but requires fairly extensive arch/x86 support - along the lines of kmap_atomic_prof_pfn() (which is not universally implemented even for x86). Testcase: igt/gem_exec_big #pnv,byt Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88392 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Add a WARN_ONCE for the impossible reloc case and explain in a short comment why we want to avoid ping-pong.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-14 19:20:56 +08:00
else if (cpu_has_clflush)
ret = relocate_entry_clflush(obj, reloc, target_offset);
else {
WARN_ONCE(1, "Impossible case in relocation handling\n");
ret = -ENODEV;
}
if (ret)
return ret;
/* and update the user's relocation entry */
reloc->presumed_offset = target_offset;
return 0;
}
static int
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
i915_gem_execbuffer_relocate_vma(struct i915_vma *vma,
struct eb_vmas *eb)
{
#define N_RELOC(x) ((x) / sizeof(struct drm_i915_gem_relocation_entry))
struct drm_i915_gem_relocation_entry stack_reloc[N_RELOC(512)];
struct drm_i915_gem_relocation_entry __user *user_relocs;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
struct drm_i915_gem_exec_object2 *entry = vma->exec_entry;
int remain, ret;
user_relocs = to_user_ptr(entry->relocs_ptr);
remain = entry->relocation_count;
while (remain) {
struct drm_i915_gem_relocation_entry *r = stack_reloc;
int count = remain;
if (count > ARRAY_SIZE(stack_reloc))
count = ARRAY_SIZE(stack_reloc);
remain -= count;
if (__copy_from_user_inatomic(r, user_relocs, count*sizeof(r[0])))
return -EFAULT;
do {
u64 offset = r->presumed_offset;
ret = i915_gem_execbuffer_relocate_entry(vma->obj, eb, r);
if (ret)
return ret;
if (r->presumed_offset != offset &&
__copy_to_user_inatomic(&user_relocs->presumed_offset,
&r->presumed_offset,
sizeof(r->presumed_offset))) {
return -EFAULT;
}
user_relocs++;
r++;
} while (--count);
}
return 0;
#undef N_RELOC
}
static int
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
i915_gem_execbuffer_relocate_vma_slow(struct i915_vma *vma,
struct eb_vmas *eb,
struct drm_i915_gem_relocation_entry *relocs)
{
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
const struct drm_i915_gem_exec_object2 *entry = vma->exec_entry;
int i, ret;
for (i = 0; i < entry->relocation_count; i++) {
ret = i915_gem_execbuffer_relocate_entry(vma->obj, eb, &relocs[i]);
if (ret)
return ret;
}
return 0;
}
static int
i915_gem_execbuffer_relocate(struct eb_vmas *eb)
{
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
struct i915_vma *vma;
int ret = 0;
/* This is the fast path and we cannot handle a pagefault whilst
* holding the struct mutex lest the user pass in the relocations
* contained within a mmaped bo. For in such a case we, the page
* fault handler would call i915_gem_fault() and we would try to
* acquire the struct mutex again. Obviously this is bad and so
* lockdep complains vehemently.
*/
pagefault_disable();
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
list_for_each_entry(vma, &eb->vmas, exec_list) {
ret = i915_gem_execbuffer_relocate_vma(vma, eb);
if (ret)
break;
}
pagefault_enable();
return ret;
}
drm/i915: Fallback to using CPU relocations for large batch buffers If the batch buffer is too large to fit into the aperture and we need a GTT mapping for relocations, we currently fail. This only applies to a subset of machines for a subset of environments, quite undesirable. We can simply check after failing to insert the batch into the GTT as to whether we only need a mappable binding for relocation and, if so, we can revert to using a non-mappable binding and an alternate relocation method. However, using relocate_entry_cpu() is excruciatingly slow for large buffers on non-LLC as the entire buffer requires clflushing before and after the relocation handling. Alternatively, we can implement a third relocation method that only clflushes around the relocation entry. This is still slower than updating through the GTT, so we prefer using the GTT where possible, but is orders of magnitude faster as we typically do not have to then clflush the entire buffer. An alternative idea of using a temporary WC mapping of the backing store is promising (it should be faster than using the GTT itself), but requires fairly extensive arch/x86 support - along the lines of kmap_atomic_prof_pfn() (which is not universally implemented even for x86). Testcase: igt/gem_exec_big #pnv,byt Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88392 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Add a WARN_ONCE for the impossible reloc case and explain in a short comment why we want to avoid ping-pong.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-14 19:20:56 +08:00
static bool only_mappable_for_reloc(unsigned int flags)
{
return (flags & (EXEC_OBJECT_NEEDS_FENCE | __EXEC_OBJECT_NEEDS_MAP)) ==
__EXEC_OBJECT_NEEDS_MAP;
}
static int
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
i915_gem_execbuffer_reserve_vma(struct i915_vma *vma,
struct intel_engine_cs *ring,
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
bool *need_reloc)
{
drm/i915: Create bind/unbind abstraction for VMAs To sum up what goes on here, we abstract the vma binding, similarly to the previous object binding. This helps for distinguishing legacy binding, versus modern binding. To keep the code churn as minimal as possible, I am leaving in insert_entries(). It serves as the per platform pte writing basically. bind_vma and insert_entries do share a lot of similarities, and I did have designs to combine the two, but as mentioned already... too much churn in an already massive patchset. What follows are the 3 commits which existed discretely in the original submissions. Upon rebasing on Broadwell support, it became clear that separation was not good, and only made for more error prone code. Below are the 3 commit messages with all their history. drm/i915: Add bind/unbind object functions to VMA drm/i915: Use the new vm [un]bind functions drm/i915: reduce vm->insert_entries() usage drm/i915: Add bind/unbind object functions to VMA As we plumb the code with more VM information, it has become more obvious that the easiest way to deal with bind and unbind is to simply put the function pointers in the vm, and let those choose the correct way to handle the page table updates. This change allows many places in the code to simply be vm->bind, and not have to worry about distinguishing PPGTT vs GGTT. Notice that this patch has no impact on functionality. I've decided to save the actual change until the next patch because I think it's easier to review that way. I'm happy to squash the two, or let Daniel do it on merge. v2: Make ggtt handle the quirky aliasing ppgtt Add flags to bind object to support above Don't ever call bind/unbind directly for PPGTT until we have real, full PPGTT (use NULLs to assert this) Make sure we rebind the ggtt if there already is a ggtt binding. This happens on set cache levels. Use VMA for bind/unbind (Daniel, Ben) v3: Reorganize ggtt_vma_bind to be more concise and easier to read (Ville). Change logic in unbind to only unbind ggtt when there is a global mapping, and to remove a redundant check if the aliasing ppgtt exists. v4: Make the bind function a bit smarter about the cache levels to avoid unnecessary multiple remaps. "I accept it is a wart, I think unifying the pin_vma / bind_vma could be unified later" (Chris) Removed the git notes, and put version info here. (Daniel) v5: Update the comment to not suck (Chris) v6: Move bind/unbind to the VMA. It makes more sense in the VMA structure (always has, but I was previously lazy). With this change, it will allow us to keep a distinct insert_entries. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: Use the new vm [un]bind functions Building on the last patch which created the new function pointers in the VM for bind/unbind, here we actually put those new function pointers to use. Split out as a separate patch to aid in review. I'm fine with squashing into the previous patch if people request it. v2: Updated to address the smart ggtt which can do aliasing as needed Make sure we bind to global gtt when mappable and fenceable. I thought we could get away without this initialy, but we cannot. v3: Make the global GTT binding explicitly use the ggtt VM for bind_vma(). While at it, use the new ggtt_vma helper (Chris) At this point the original mailing list thread diverges. ie. v4^: use target_obj instead of obj for gen6 relocate_entry vma->bind_vma() can be called safely during pin. So simply do that instead of the complicated conditionals. Don't restore PPGTT bound objects on resume path Bug fix in resume path for globally bound Bos Properly handle secure dispatch Rebased on vma bind/unbind conversion Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: reduce vm->insert_entries() usage FKA: drm/i915: eliminate vm->insert_entries() With bind/unbind function pointers in place, we no longer need insert_entries. We could, and want, to remove clear_range, however it's not totally easy at this point. Since it's used in a couple of place still that don't only deal in objects: setup, ppgtt init, and restore gtt mappings. v2: Don't actually remove insert_entries, just limit its usage. It will be useful when we introduce gen8. It will always be called from the vma bind/unbind. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-07 06:10:56 +08:00
struct drm_i915_gem_object *obj = vma->obj;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
struct drm_i915_gem_exec_object2 *entry = vma->exec_entry;
drm/i915: Prevent negative relocation deltas from wrapping This is pure evil. Userspace, I'm looking at you SNA, repacks batch buffers on the fly after generation as they are being passed to the kernel for execution. These batches also contain self-referenced relocations as a single buffer encompasses the state commands, kernels, vertices and sampler. During generation the buffers are placed at known offsets within the full batch, and then the relocation deltas (as passed to the kernel) are tweaked as the batch is repacked into a smaller buffer. This means that userspace is passing negative relocations deltas, which subsequently wrap to large values if the batch is at a low address. The GPU hangs when it then tries to use the large value as a base for its address offsets, rather than wrapping back to the real value (as one would hope). As the GPU uses positive offsets from the base, we can treat the relocation address as the minimum address read by the GPU. For the upper bound, we trust that userspace will not read beyond the end of the buffer. So, how do we fix negative relocations from wrapping? We can either check that every relocation looks valid when we write it, and then position each object such that we prevent the offset wraparound, or we just special-case the self-referential behaviour of SNA and force all batches to be above 256k. Daniel prefers the latter approach. This fixes a GPU hang when it tries to use an address (relocation + offset) greater than the GTT size. The issue would occur quite easily with full-ppgtt as each fd gets its own VM space, so low offsets would often be handed out. However, with the rearrangement of the low GTT due to capturing the BIOS framebuffer, it is already affecting kernels 3.15 onwards. I think only IVB+ is susceptible to this bug, but the workaround should only kick in rarely, so it seems sensible to always apply it. v3: Use a bias for batch buffers to prevent small negative delta relocations from wrapping. v4 from Daniel: - s/BIAS/BATCH_OFFSET_BIAS/ - Extract eb_vma_misplaced/i915_vma_misplaced since the conditions were growing rather cumbersome. - Add a comment to eb_get_batch explaining why we do this. - Apply the batch offset bias everywhere but mention that we've only observed it on gen7 gpus. - Drop PIN_OFFSET_FIX for now, that slipped in from a feature patch. v5: Add static to eb_get_batch, spotted by 0-day tester. Testcase: igt/gem_bad_reloc Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78533 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v3) Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-23 14:48:08 +08:00
uint64_t flags;
int ret;
flags = 0;
drm/i915: Fallback to using CPU relocations for large batch buffers If the batch buffer is too large to fit into the aperture and we need a GTT mapping for relocations, we currently fail. This only applies to a subset of machines for a subset of environments, quite undesirable. We can simply check after failing to insert the batch into the GTT as to whether we only need a mappable binding for relocation and, if so, we can revert to using a non-mappable binding and an alternate relocation method. However, using relocate_entry_cpu() is excruciatingly slow for large buffers on non-LLC as the entire buffer requires clflushing before and after the relocation handling. Alternatively, we can implement a third relocation method that only clflushes around the relocation entry. This is still slower than updating through the GTT, so we prefer using the GTT where possible, but is orders of magnitude faster as we typically do not have to then clflush the entire buffer. An alternative idea of using a temporary WC mapping of the backing store is promising (it should be faster than using the GTT itself), but requires fairly extensive arch/x86 support - along the lines of kmap_atomic_prof_pfn() (which is not universally implemented even for x86). Testcase: igt/gem_exec_big #pnv,byt Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88392 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Add a WARN_ONCE for the impossible reloc case and explain in a short comment why we want to avoid ping-pong.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-14 19:20:56 +08:00
if (!drm_mm_node_allocated(&vma->node)) {
if (entry->flags & __EXEC_OBJECT_NEEDS_MAP)
flags |= PIN_GLOBAL | PIN_MAPPABLE;
if (entry->flags & EXEC_OBJECT_NEEDS_GTT)
flags |= PIN_GLOBAL;
if (entry->flags & __EXEC_OBJECT_NEEDS_BIAS)
flags |= BATCH_OFFSET_BIAS | PIN_OFFSET_BIAS;
}
ret = i915_gem_object_pin(obj, vma->vm, entry->alignment, flags);
drm/i915: Fallback to using CPU relocations for large batch buffers If the batch buffer is too large to fit into the aperture and we need a GTT mapping for relocations, we currently fail. This only applies to a subset of machines for a subset of environments, quite undesirable. We can simply check after failing to insert the batch into the GTT as to whether we only need a mappable binding for relocation and, if so, we can revert to using a non-mappable binding and an alternate relocation method. However, using relocate_entry_cpu() is excruciatingly slow for large buffers on non-LLC as the entire buffer requires clflushing before and after the relocation handling. Alternatively, we can implement a third relocation method that only clflushes around the relocation entry. This is still slower than updating through the GTT, so we prefer using the GTT where possible, but is orders of magnitude faster as we typically do not have to then clflush the entire buffer. An alternative idea of using a temporary WC mapping of the backing store is promising (it should be faster than using the GTT itself), but requires fairly extensive arch/x86 support - along the lines of kmap_atomic_prof_pfn() (which is not universally implemented even for x86). Testcase: igt/gem_exec_big #pnv,byt Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88392 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Add a WARN_ONCE for the impossible reloc case and explain in a short comment why we want to avoid ping-pong.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-14 19:20:56 +08:00
if ((ret == -ENOSPC || ret == -E2BIG) &&
only_mappable_for_reloc(entry->flags))
ret = i915_gem_object_pin(obj, vma->vm,
entry->alignment,
flags & ~(PIN_GLOBAL | PIN_MAPPABLE));
if (ret)
return ret;
entry->flags |= __EXEC_OBJECT_HAS_PIN;
if (entry->flags & EXEC_OBJECT_NEEDS_FENCE) {
ret = i915_gem_object_get_fence(obj);
if (ret)
return ret;
if (i915_gem_object_pin_fence(obj))
entry->flags |= __EXEC_OBJECT_HAS_FENCE;
}
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
if (entry->offset != vma->node.start) {
entry->offset = vma->node.start;
*need_reloc = true;
}
if (entry->flags & EXEC_OBJECT_WRITE) {
obj->base.pending_read_domains = I915_GEM_DOMAIN_RENDER;
obj->base.pending_write_domain = I915_GEM_DOMAIN_RENDER;
}
return 0;
}
drm/i915: Prevent negative relocation deltas from wrapping This is pure evil. Userspace, I'm looking at you SNA, repacks batch buffers on the fly after generation as they are being passed to the kernel for execution. These batches also contain self-referenced relocations as a single buffer encompasses the state commands, kernels, vertices and sampler. During generation the buffers are placed at known offsets within the full batch, and then the relocation deltas (as passed to the kernel) are tweaked as the batch is repacked into a smaller buffer. This means that userspace is passing negative relocations deltas, which subsequently wrap to large values if the batch is at a low address. The GPU hangs when it then tries to use the large value as a base for its address offsets, rather than wrapping back to the real value (as one would hope). As the GPU uses positive offsets from the base, we can treat the relocation address as the minimum address read by the GPU. For the upper bound, we trust that userspace will not read beyond the end of the buffer. So, how do we fix negative relocations from wrapping? We can either check that every relocation looks valid when we write it, and then position each object such that we prevent the offset wraparound, or we just special-case the self-referential behaviour of SNA and force all batches to be above 256k. Daniel prefers the latter approach. This fixes a GPU hang when it tries to use an address (relocation + offset) greater than the GTT size. The issue would occur quite easily with full-ppgtt as each fd gets its own VM space, so low offsets would often be handed out. However, with the rearrangement of the low GTT due to capturing the BIOS framebuffer, it is already affecting kernels 3.15 onwards. I think only IVB+ is susceptible to this bug, but the workaround should only kick in rarely, so it seems sensible to always apply it. v3: Use a bias for batch buffers to prevent small negative delta relocations from wrapping. v4 from Daniel: - s/BIAS/BATCH_OFFSET_BIAS/ - Extract eb_vma_misplaced/i915_vma_misplaced since the conditions were growing rather cumbersome. - Add a comment to eb_get_batch explaining why we do this. - Apply the batch offset bias everywhere but mention that we've only observed it on gen7 gpus. - Drop PIN_OFFSET_FIX for now, that slipped in from a feature patch. v5: Add static to eb_get_batch, spotted by 0-day tester. Testcase: igt/gem_bad_reloc Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78533 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v3) Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-23 14:48:08 +08:00
static bool
need_reloc_mappable(struct i915_vma *vma)
drm/i915: Prevent negative relocation deltas from wrapping This is pure evil. Userspace, I'm looking at you SNA, repacks batch buffers on the fly after generation as they are being passed to the kernel for execution. These batches also contain self-referenced relocations as a single buffer encompasses the state commands, kernels, vertices and sampler. During generation the buffers are placed at known offsets within the full batch, and then the relocation deltas (as passed to the kernel) are tweaked as the batch is repacked into a smaller buffer. This means that userspace is passing negative relocations deltas, which subsequently wrap to large values if the batch is at a low address. The GPU hangs when it then tries to use the large value as a base for its address offsets, rather than wrapping back to the real value (as one would hope). As the GPU uses positive offsets from the base, we can treat the relocation address as the minimum address read by the GPU. For the upper bound, we trust that userspace will not read beyond the end of the buffer. So, how do we fix negative relocations from wrapping? We can either check that every relocation looks valid when we write it, and then position each object such that we prevent the offset wraparound, or we just special-case the self-referential behaviour of SNA and force all batches to be above 256k. Daniel prefers the latter approach. This fixes a GPU hang when it tries to use an address (relocation + offset) greater than the GTT size. The issue would occur quite easily with full-ppgtt as each fd gets its own VM space, so low offsets would often be handed out. However, with the rearrangement of the low GTT due to capturing the BIOS framebuffer, it is already affecting kernels 3.15 onwards. I think only IVB+ is susceptible to this bug, but the workaround should only kick in rarely, so it seems sensible to always apply it. v3: Use a bias for batch buffers to prevent small negative delta relocations from wrapping. v4 from Daniel: - s/BIAS/BATCH_OFFSET_BIAS/ - Extract eb_vma_misplaced/i915_vma_misplaced since the conditions were growing rather cumbersome. - Add a comment to eb_get_batch explaining why we do this. - Apply the batch offset bias everywhere but mention that we've only observed it on gen7 gpus. - Drop PIN_OFFSET_FIX for now, that slipped in from a feature patch. v5: Add static to eb_get_batch, spotted by 0-day tester. Testcase: igt/gem_bad_reloc Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78533 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v3) Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-23 14:48:08 +08:00
{
struct drm_i915_gem_exec_object2 *entry = vma->exec_entry;
if (entry->relocation_count == 0)
return false;
if (!i915_is_ggtt(vma->vm))
return false;
/* See also use_cpu_reloc() */
if (HAS_LLC(vma->obj->base.dev))
return false;
if (vma->obj->base.write_domain == I915_GEM_DOMAIN_CPU)
return false;
return true;
}
static bool
eb_vma_misplaced(struct i915_vma *vma)
{
struct drm_i915_gem_exec_object2 *entry = vma->exec_entry;
struct drm_i915_gem_object *obj = vma->obj;
drm/i915: Prevent negative relocation deltas from wrapping This is pure evil. Userspace, I'm looking at you SNA, repacks batch buffers on the fly after generation as they are being passed to the kernel for execution. These batches also contain self-referenced relocations as a single buffer encompasses the state commands, kernels, vertices and sampler. During generation the buffers are placed at known offsets within the full batch, and then the relocation deltas (as passed to the kernel) are tweaked as the batch is repacked into a smaller buffer. This means that userspace is passing negative relocations deltas, which subsequently wrap to large values if the batch is at a low address. The GPU hangs when it then tries to use the large value as a base for its address offsets, rather than wrapping back to the real value (as one would hope). As the GPU uses positive offsets from the base, we can treat the relocation address as the minimum address read by the GPU. For the upper bound, we trust that userspace will not read beyond the end of the buffer. So, how do we fix negative relocations from wrapping? We can either check that every relocation looks valid when we write it, and then position each object such that we prevent the offset wraparound, or we just special-case the self-referential behaviour of SNA and force all batches to be above 256k. Daniel prefers the latter approach. This fixes a GPU hang when it tries to use an address (relocation + offset) greater than the GTT size. The issue would occur quite easily with full-ppgtt as each fd gets its own VM space, so low offsets would often be handed out. However, with the rearrangement of the low GTT due to capturing the BIOS framebuffer, it is already affecting kernels 3.15 onwards. I think only IVB+ is susceptible to this bug, but the workaround should only kick in rarely, so it seems sensible to always apply it. v3: Use a bias for batch buffers to prevent small negative delta relocations from wrapping. v4 from Daniel: - s/BIAS/BATCH_OFFSET_BIAS/ - Extract eb_vma_misplaced/i915_vma_misplaced since the conditions were growing rather cumbersome. - Add a comment to eb_get_batch explaining why we do this. - Apply the batch offset bias everywhere but mention that we've only observed it on gen7 gpus. - Drop PIN_OFFSET_FIX for now, that slipped in from a feature patch. v5: Add static to eb_get_batch, spotted by 0-day tester. Testcase: igt/gem_bad_reloc Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78533 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v3) Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-23 14:48:08 +08:00
WARN_ON(entry->flags & __EXEC_OBJECT_NEEDS_MAP &&
drm/i915: Prevent negative relocation deltas from wrapping This is pure evil. Userspace, I'm looking at you SNA, repacks batch buffers on the fly after generation as they are being passed to the kernel for execution. These batches also contain self-referenced relocations as a single buffer encompasses the state commands, kernels, vertices and sampler. During generation the buffers are placed at known offsets within the full batch, and then the relocation deltas (as passed to the kernel) are tweaked as the batch is repacked into a smaller buffer. This means that userspace is passing negative relocations deltas, which subsequently wrap to large values if the batch is at a low address. The GPU hangs when it then tries to use the large value as a base for its address offsets, rather than wrapping back to the real value (as one would hope). As the GPU uses positive offsets from the base, we can treat the relocation address as the minimum address read by the GPU. For the upper bound, we trust that userspace will not read beyond the end of the buffer. So, how do we fix negative relocations from wrapping? We can either check that every relocation looks valid when we write it, and then position each object such that we prevent the offset wraparound, or we just special-case the self-referential behaviour of SNA and force all batches to be above 256k. Daniel prefers the latter approach. This fixes a GPU hang when it tries to use an address (relocation + offset) greater than the GTT size. The issue would occur quite easily with full-ppgtt as each fd gets its own VM space, so low offsets would often be handed out. However, with the rearrangement of the low GTT due to capturing the BIOS framebuffer, it is already affecting kernels 3.15 onwards. I think only IVB+ is susceptible to this bug, but the workaround should only kick in rarely, so it seems sensible to always apply it. v3: Use a bias for batch buffers to prevent small negative delta relocations from wrapping. v4 from Daniel: - s/BIAS/BATCH_OFFSET_BIAS/ - Extract eb_vma_misplaced/i915_vma_misplaced since the conditions were growing rather cumbersome. - Add a comment to eb_get_batch explaining why we do this. - Apply the batch offset bias everywhere but mention that we've only observed it on gen7 gpus. - Drop PIN_OFFSET_FIX for now, that slipped in from a feature patch. v5: Add static to eb_get_batch, spotted by 0-day tester. Testcase: igt/gem_bad_reloc Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78533 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v3) Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-23 14:48:08 +08:00
!i915_is_ggtt(vma->vm));
if (entry->alignment &&
vma->node.start & (entry->alignment - 1))
return true;
if (entry->flags & __EXEC_OBJECT_NEEDS_BIAS &&
vma->node.start < BATCH_OFFSET_BIAS)
return true;
drm/i915: Fallback to using CPU relocations for large batch buffers If the batch buffer is too large to fit into the aperture and we need a GTT mapping for relocations, we currently fail. This only applies to a subset of machines for a subset of environments, quite undesirable. We can simply check after failing to insert the batch into the GTT as to whether we only need a mappable binding for relocation and, if so, we can revert to using a non-mappable binding and an alternate relocation method. However, using relocate_entry_cpu() is excruciatingly slow for large buffers on non-LLC as the entire buffer requires clflushing before and after the relocation handling. Alternatively, we can implement a third relocation method that only clflushes around the relocation entry. This is still slower than updating through the GTT, so we prefer using the GTT where possible, but is orders of magnitude faster as we typically do not have to then clflush the entire buffer. An alternative idea of using a temporary WC mapping of the backing store is promising (it should be faster than using the GTT itself), but requires fairly extensive arch/x86 support - along the lines of kmap_atomic_prof_pfn() (which is not universally implemented even for x86). Testcase: igt/gem_exec_big #pnv,byt Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88392 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Add a WARN_ONCE for the impossible reloc case and explain in a short comment why we want to avoid ping-pong.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-14 19:20:56 +08:00
/* avoid costly ping-pong once a batch bo ended up non-mappable */
if (entry->flags & __EXEC_OBJECT_NEEDS_MAP && !obj->map_and_fenceable)
return !only_mappable_for_reloc(entry->flags);
drm/i915: Prevent negative relocation deltas from wrapping This is pure evil. Userspace, I'm looking at you SNA, repacks batch buffers on the fly after generation as they are being passed to the kernel for execution. These batches also contain self-referenced relocations as a single buffer encompasses the state commands, kernels, vertices and sampler. During generation the buffers are placed at known offsets within the full batch, and then the relocation deltas (as passed to the kernel) are tweaked as the batch is repacked into a smaller buffer. This means that userspace is passing negative relocations deltas, which subsequently wrap to large values if the batch is at a low address. The GPU hangs when it then tries to use the large value as a base for its address offsets, rather than wrapping back to the real value (as one would hope). As the GPU uses positive offsets from the base, we can treat the relocation address as the minimum address read by the GPU. For the upper bound, we trust that userspace will not read beyond the end of the buffer. So, how do we fix negative relocations from wrapping? We can either check that every relocation looks valid when we write it, and then position each object such that we prevent the offset wraparound, or we just special-case the self-referential behaviour of SNA and force all batches to be above 256k. Daniel prefers the latter approach. This fixes a GPU hang when it tries to use an address (relocation + offset) greater than the GTT size. The issue would occur quite easily with full-ppgtt as each fd gets its own VM space, so low offsets would often be handed out. However, with the rearrangement of the low GTT due to capturing the BIOS framebuffer, it is already affecting kernels 3.15 onwards. I think only IVB+ is susceptible to this bug, but the workaround should only kick in rarely, so it seems sensible to always apply it. v3: Use a bias for batch buffers to prevent small negative delta relocations from wrapping. v4 from Daniel: - s/BIAS/BATCH_OFFSET_BIAS/ - Extract eb_vma_misplaced/i915_vma_misplaced since the conditions were growing rather cumbersome. - Add a comment to eb_get_batch explaining why we do this. - Apply the batch offset bias everywhere but mention that we've only observed it on gen7 gpus. - Drop PIN_OFFSET_FIX for now, that slipped in from a feature patch. v5: Add static to eb_get_batch, spotted by 0-day tester. Testcase: igt/gem_bad_reloc Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78533 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v3) Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-23 14:48:08 +08:00
return false;
}
static int
i915_gem_execbuffer_reserve(struct intel_engine_cs *ring,
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
struct list_head *vmas,
bool *need_relocs)
{
struct drm_i915_gem_object *obj;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
struct i915_vma *vma;
struct i915_address_space *vm;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
struct list_head ordered_vmas;
bool has_fenced_gpu_access = INTEL_INFO(ring->dev)->gen < 4;
int retry;
i915_gem_retire_requests_ring(ring);
vm = list_first_entry(vmas, struct i915_vma, exec_list)->vm;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
INIT_LIST_HEAD(&ordered_vmas);
while (!list_empty(vmas)) {
struct drm_i915_gem_exec_object2 *entry;
bool need_fence, need_mappable;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
vma = list_first_entry(vmas, struct i915_vma, exec_list);
obj = vma->obj;
entry = vma->exec_entry;
if (!has_fenced_gpu_access)
entry->flags &= ~EXEC_OBJECT_NEEDS_FENCE;
need_fence =
entry->flags & EXEC_OBJECT_NEEDS_FENCE &&
obj->tiling_mode != I915_TILING_NONE;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
need_mappable = need_fence || need_reloc_mappable(vma);
if (need_mappable) {
entry->flags |= __EXEC_OBJECT_NEEDS_MAP;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
list_move(&vma->exec_list, &ordered_vmas);
} else
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
list_move_tail(&vma->exec_list, &ordered_vmas);
obj->base.pending_read_domains = I915_GEM_GPU_DOMAINS & ~I915_GEM_DOMAIN_COMMAND;
obj->base.pending_write_domain = 0;
}
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
list_splice(&ordered_vmas, vmas);
/* Attempt to pin all of the buffers into the GTT.
* This is done in 3 phases:
*
* 1a. Unbind all objects that do not match the GTT constraints for
* the execbuffer (fenceable, mappable, alignment etc).
* 1b. Increment pin count for already bound objects.
* 2. Bind new objects.
* 3. Decrement pin count.
*
* This avoid unnecessary unbinding of later objects in order to make
* room for the earlier objects *unless* we need to defragment.
*/
retry = 0;
do {
int ret = 0;
/* Unbind any ill-fitting objects or pin. */
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
list_for_each_entry(vma, vmas, exec_list) {
if (!drm_mm_node_allocated(&vma->node))
continue;
if (eb_vma_misplaced(vma))
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
ret = i915_vma_unbind(vma);
else
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
ret = i915_gem_execbuffer_reserve_vma(vma, ring, need_relocs);
if (ret)
goto err;
}
/* Bind fresh objects */
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
list_for_each_entry(vma, vmas, exec_list) {
if (drm_mm_node_allocated(&vma->node))
continue;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
ret = i915_gem_execbuffer_reserve_vma(vma, ring, need_relocs);
if (ret)
goto err;
}
err:
drm/i915: Track unbound pages When dealing with a working set larger than the GATT, or even the mappable aperture when touching through the GTT, we end up with evicting objects only to rebind them at a new offset again later. Moving an object into and out of the GTT requires clflushing the pages, thus causing a double-clflush penalty for rebinding. To avoid having to clflush on rebinding, we can track the pages as they are evicted from the GTT and only relinquish those pages on memory pressure. As usual, if it were not for the handling of out-of-memory condition and having to manually shrink our own bo caches, it would be a net reduction of code. Alas. Note: The patch also contains a few changes to the last-hope evict_everything logic in i916_gem_execbuffer.c - we no longer try to only evict the purgeable stuff in a first try (since that's superflous and only helps in OOM corner-cases, not fragmented-gtt trashing situations). Also, the extraction of the get_pages retry loop from bind_to_gtt (and other callsites) to get_pages should imo have been a separate patch. v2: Ditch the newly added put_pages (for unbound objects only) in i915_gem_reset. A quick irc discussion hasn't revealed any important reason for this, so if we need this, I'd like to have a git blame'able explanation for it. v3: Undo the s/drm_malloc_ab/kmalloc/ in get_pages that Chris noticed. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Split out code movements and rant a bit in the commit message with a few Notes. Done v2] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-08-20 17:40:46 +08:00
if (ret != -ENOSPC || retry++)
return ret;
/* Decrement pin count for bound objects */
list_for_each_entry(vma, vmas, exec_list)
i915_gem_execbuffer_unreserve_vma(vma);
ret = i915_gem_evict_vm(vm, true);
if (ret)
return ret;
} while (1);
}
static int
i915_gem_execbuffer_relocate_slow(struct drm_device *dev,
struct drm_i915_gem_execbuffer2 *args,
struct drm_file *file,
struct intel_engine_cs *ring,
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
struct eb_vmas *eb,
struct drm_i915_gem_exec_object2 *exec)
{
struct drm_i915_gem_relocation_entry *reloc;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
struct i915_address_space *vm;
struct i915_vma *vma;
bool need_relocs;
int *reloc_offset;
int i, total, ret;
unsigned count = args->buffer_count;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
vm = list_first_entry(&eb->vmas, struct i915_vma, exec_list)->vm;
/* We may process another execbuffer during the unlock... */
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
while (!list_empty(&eb->vmas)) {
vma = list_first_entry(&eb->vmas, struct i915_vma, exec_list);
list_del_init(&vma->exec_list);
i915_gem_execbuffer_unreserve_vma(vma);
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
drm_gem_object_unreference(&vma->obj->base);
}
mutex_unlock(&dev->struct_mutex);
total = 0;
for (i = 0; i < count; i++)
total += exec[i].relocation_count;
reloc_offset = drm_malloc_ab(count, sizeof(*reloc_offset));
reloc = drm_malloc_ab(total, sizeof(*reloc));
if (reloc == NULL || reloc_offset == NULL) {
drm_free_large(reloc);
drm_free_large(reloc_offset);
mutex_lock(&dev->struct_mutex);
return -ENOMEM;
}
total = 0;
for (i = 0; i < count; i++) {
struct drm_i915_gem_relocation_entry __user *user_relocs;
u64 invalid_offset = (u64)-1;
int j;
user_relocs = to_user_ptr(exec[i].relocs_ptr);
if (copy_from_user(reloc+total, user_relocs,
exec[i].relocation_count * sizeof(*reloc))) {
ret = -EFAULT;
mutex_lock(&dev->struct_mutex);
goto err;
}
/* As we do not update the known relocation offsets after
* relocating (due to the complexities in lock handling),
* we need to mark them as invalid now so that we force the
* relocation processing next time. Just in case the target
* object is evicted and then rebound into its old
* presumed_offset before the next execbuffer - if that
* happened we would make the mistake of assuming that the
* relocations were valid.
*/
for (j = 0; j < exec[i].relocation_count; j++) {
if (__copy_to_user(&user_relocs[j].presumed_offset,
&invalid_offset,
sizeof(invalid_offset))) {
ret = -EFAULT;
mutex_lock(&dev->struct_mutex);
goto err;
}
}
reloc_offset[i] = total;
total += exec[i].relocation_count;
}
ret = i915_mutex_lock_interruptible(dev);
if (ret) {
mutex_lock(&dev->struct_mutex);
goto err;
}
/* reacquire the objects */
eb_reset(eb);
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
ret = eb_lookup_vmas(eb, exec, args, vm, file);
if (ret)
goto err;
need_relocs = (args->flags & I915_EXEC_NO_RELOC) == 0;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
ret = i915_gem_execbuffer_reserve(ring, &eb->vmas, &need_relocs);
if (ret)
goto err;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
list_for_each_entry(vma, &eb->vmas, exec_list) {
int offset = vma->exec_entry - exec;
ret = i915_gem_execbuffer_relocate_vma_slow(vma, eb,
reloc + reloc_offset[offset]);
if (ret)
goto err;
}
/* Leave the user relocations as are, this is the painfully slow path,
* and we want to avoid the complication of dropping the lock whilst
* having buffers reserved in the aperture and so causing spurious
* ENOSPC for random operations.
*/
err:
drm_free_large(reloc);
drm_free_large(reloc_offset);
return ret;
}
static int
i915_gem_execbuffer_move_to_gpu(struct intel_engine_cs *ring,
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
struct list_head *vmas)
{
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
struct i915_vma *vma;
uint32_t flush_domains = 0;
bool flush_chipset = false;
int ret;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
list_for_each_entry(vma, vmas, exec_list) {
struct drm_i915_gem_object *obj = vma->obj;
ret = i915_gem_object_sync(obj, ring);
if (ret)
return ret;
if (obj->base.write_domain & I915_GEM_DOMAIN_CPU)
flush_chipset |= i915_gem_clflush_object(obj, false);
flush_domains |= obj->base.write_domain;
}
if (flush_chipset)
drm/i915: Stop using AGP layer for GEN6+ As a quick hack we make the old intel_gtt structure mutable so we can fool a bunch of the existing code which depends on elements in that data structure. We can/should try to remove this in a subsequent patch. This should preserve the old gtt init behavior which upon writing these patches seems incorrect. The next patch will fix these things. The one exception is VLV which doesn't have the preserved flush control write behavior. Since we want to do that for all GEN6+ stuff, we'll handle that in a later patch. Mainstream VLV support doesn't actually exist yet anyway. v2: Update the comment to remove the "voodoo" Check that the last pte written matches what we readback v3: actually kill cache_level_to_agp_type since most of the flags will disappear in an upcoming patch v4: v3 was actually not what we wanted (Daniel) Make the ggtt bind assertions better and stricter (Chris) Fix some uncaught errors at gtt init (Chris) Some other random stuff that Chris wanted v5: check for i==0 in gen6_ggtt_bind_object to shut up gcc (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by [v4]: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Make the cache_level -> agp_flags conversion for pre-gen6 a tad more robust by mapping everything != CACHE_NONE to the cached agp flag - we have a 1:1 uncached mapping, but different modes of cacheable (at least on later generations). Suggested by Chris Wilson.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-05 01:21:27 +08:00
i915_gem_chipset_flush(ring->dev);
if (flush_domains & I915_GEM_DOMAIN_GTT)
wmb();
drm/i915: Insert a flush between batches if the breadcrumb was dropped If we drop the breadcrumb request after a batch due to a signal for example we aim to fix it up at the next opportunity. In this case we emit a second batchbuffer with no waits upon the first and so no opportunity to insert the missing request, so we need to emit the missing flush for coherency. (Note that that invalidating the render cache is the same as flushing it, so there should have been no observable corruption.) Note that beside simply adding the missing flush, avoiding potential render corruption, this will also fix at least parts of the problem introduced by some funny interaction of these two commits: commit de2b998552c1534e87bfbc51ec5734b02bc89020 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Wed Jul 4 22:52:50 2012 +0200 drm/i915: don't return a spurious -EIO from intel_ring_begin which allowed intel_ring_begin to return -ERESTARTSYS and commit cc889e0f6ce6a63c62db17d702ecfed86d58083f Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Wed Jun 13 20:45:19 2012 +0200 drm/i915: disable flushing_list/gpu_write_list which essentially disabled the flushing list. The issue happens when we submit a batch & emit it, but get interrupted (thanks to the first patch) while trying to emit the flush. On the next batch we still assume that the full gpu domain handling is in effect and hence compute the invalidate&flushing domains. But thanks to the 2nd patch we totally ignore these and only invalidate all gpu domains, presuming that any required flushes have been issued already. Which is wrong and eventually results in us updating the new write_domain values with the computed pending_write_domain values, which leaves an object with write_domain == 0 on the gpu_write_list. As soon as we try to unbind that object, things blow up. Fix this by emitting the missing flush according to the new ring->gpu_caches_dirty flag. Note that this does _not_ fix all the current cases where we end up with an object on the flushing_list that can't be flushed. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=52040 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Add bug explanation to commit message.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-07-13 21:14:08 +08:00
/* Unconditionally invalidate gpu caches and ensure that we do flush
* any residual writes from the previous batch.
*/
return intel_ring_invalidate_all_caches(ring);
}
static bool
i915_gem_check_execbuffer(struct drm_i915_gem_execbuffer2 *exec)
{
if (exec->flags & __I915_EXEC_UNKNOWN_FLAGS)
return false;
return ((exec->batch_start_offset | exec->batch_len) & 0x7) == 0;
}
static int
validate_exec_list(struct drm_device *dev,
struct drm_i915_gem_exec_object2 *exec,
int count)
{
unsigned relocs_total = 0;
unsigned relocs_max = UINT_MAX / sizeof(struct drm_i915_gem_relocation_entry);
unsigned invalid_flags;
int i;
invalid_flags = __EXEC_OBJECT_UNKNOWN_FLAGS;
if (USES_FULL_PPGTT(dev))
invalid_flags |= EXEC_OBJECT_NEEDS_GTT;
for (i = 0; i < count; i++) {
char __user *ptr = to_user_ptr(exec[i].relocs_ptr);
int length; /* limited by fault_in_pages_readable() */
if (exec[i].flags & invalid_flags)
return -EINVAL;
/* First check for malicious input causing overflow in
* the worst case where we need to allocate the entire
* relocation tree as a single array.
*/
if (exec[i].relocation_count > relocs_max - relocs_total)
return -EINVAL;
relocs_total += exec[i].relocation_count;
length = exec[i].relocation_count *
sizeof(struct drm_i915_gem_relocation_entry);
/*
* We must check that the entire relocation array is safe
* to read, but since we may need to update the presumed
* offsets during execution, check for full write access.
*/
if (!access_ok(VERIFY_WRITE, ptr, length))
return -EFAULT;
if (likely(!i915.prefault_disable)) {
if (fault_in_multipages_readable(ptr, length))
return -EFAULT;
}
}
return 0;
}
static struct intel_context *
i915_gem_validate_context(struct drm_device *dev, struct drm_file *file,
struct intel_engine_cs *ring, const u32 ctx_id)
{
struct intel_context *ctx = NULL;
struct i915_ctx_hang_stats *hs;
drm/i915: Emphasize that ctx->id is merely a user handle This is an Execlists preparatory patch, since they make context ID become an overloaded term: - In the software, it was used to distinguish which context userspace was trying to use. - In the BSpec, the term is used to describe the 20-bits long field the hardware uses to it to discriminate the contexts that are submitted to the ELSP and inform the driver about their current status (via Context Switch Interrupts and Context Status Buffers). Initially, I tried to make the different meanings converge, but it proved impossible: - The software ctx->id is per-filp, while the hardware one needs to be globally unique. - Also, we multiplex several backing states objects per intel_context, and all of them need unique HW IDs. - I tried adding a per-filp ID and then composing the HW context ID as: ctx->id + file_priv->id + ring->id, but the fact that the hardware only uses 20-bits means we have to artificially limit the number of filps or contexts the userspace can create. The ctx->user_handle renaming bits are done with this Cocci patch (plus manual frobbing of the struct declaration): @@ struct intel_context c; @@ - (c).id + c.user_handle @@ struct intel_context *c; @@ - (c)->id + c->user_handle Also, while we are at it, s/DEFAULT_CONTEXT_ID/DEFAULT_CONTEXT_HANDLE and change the type to unsigned 32 bits. v2: s/handle/user_handle and change the type to uint32_t as suggested by Chris Wilson. Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v1) Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-03 23:28:00 +08:00
if (ring->id != RCS && ctx_id != DEFAULT_CONTEXT_HANDLE)
return ERR_PTR(-EINVAL);
drm/i915: Get context early in execbuf We need to have the address space when reserving space for the objects. Since the address space and context are tied together, and reserve occurs before context switch (for good reason), we must lookup our context earlier in the process. This leaves some room for optimizations where we no longer need to use ctx_id in certain places. This will be addressed in a subsequent patch. Important tricky bit: Because slow relocations during execbuffer drop struct_mutex Perhaps it would be best to acquire the reference when we get the context, but I'll save that for another day (note I have written the patch before, and I found the changes required to be uglier than this). Note that since we currently access everything via context id, and not the data structure this is fine, though not desirable. The next change attempts to get the context only once via the context ID idr lookup, and as such, the following can happen: CTX-A is created, refcount = 1 CTX-A execbuf, mutex dropped close IOCTL called on CTX-A, refcount = 0 CTX-A resumes in execbuf. v2: Rebased on top of commit b6359918b885da7c7b58c050674278dbd06020ab Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Wed Oct 30 15:44:16 2013 +0200 drm/i915: add i915_get_reset_stats_ioctl v3: Rebased on top of commit 25b3dfc87bff80317d67ddd2cd4cfb91e6fe7d79 Author: Mika Westerberg <mika.westerberg@linux.intel.com> Date: Tue Nov 12 11:57:30 2013 +0200 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Nov 26 16:14:33 2013 +0200 drm/i915: check context reset stats before relocations Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-07 06:11:21 +08:00
ctx = i915_gem_context_get(file->driver_priv, ctx_id);
if (IS_ERR(ctx))
drm/i915: Get context early in execbuf We need to have the address space when reserving space for the objects. Since the address space and context are tied together, and reserve occurs before context switch (for good reason), we must lookup our context earlier in the process. This leaves some room for optimizations where we no longer need to use ctx_id in certain places. This will be addressed in a subsequent patch. Important tricky bit: Because slow relocations during execbuffer drop struct_mutex Perhaps it would be best to acquire the reference when we get the context, but I'll save that for another day (note I have written the patch before, and I found the changes required to be uglier than this). Note that since we currently access everything via context id, and not the data structure this is fine, though not desirable. The next change attempts to get the context only once via the context ID idr lookup, and as such, the following can happen: CTX-A is created, refcount = 1 CTX-A execbuf, mutex dropped close IOCTL called on CTX-A, refcount = 0 CTX-A resumes in execbuf. v2: Rebased on top of commit b6359918b885da7c7b58c050674278dbd06020ab Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Wed Oct 30 15:44:16 2013 +0200 drm/i915: add i915_get_reset_stats_ioctl v3: Rebased on top of commit 25b3dfc87bff80317d67ddd2cd4cfb91e6fe7d79 Author: Mika Westerberg <mika.westerberg@linux.intel.com> Date: Tue Nov 12 11:57:30 2013 +0200 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Nov 26 16:14:33 2013 +0200 drm/i915: check context reset stats before relocations Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-07 06:11:21 +08:00
return ctx;
drm/i915: Get context early in execbuf We need to have the address space when reserving space for the objects. Since the address space and context are tied together, and reserve occurs before context switch (for good reason), we must lookup our context earlier in the process. This leaves some room for optimizations where we no longer need to use ctx_id in certain places. This will be addressed in a subsequent patch. Important tricky bit: Because slow relocations during execbuffer drop struct_mutex Perhaps it would be best to acquire the reference when we get the context, but I'll save that for another day (note I have written the patch before, and I found the changes required to be uglier than this). Note that since we currently access everything via context id, and not the data structure this is fine, though not desirable. The next change attempts to get the context only once via the context ID idr lookup, and as such, the following can happen: CTX-A is created, refcount = 1 CTX-A execbuf, mutex dropped close IOCTL called on CTX-A, refcount = 0 CTX-A resumes in execbuf. v2: Rebased on top of commit b6359918b885da7c7b58c050674278dbd06020ab Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Wed Oct 30 15:44:16 2013 +0200 drm/i915: add i915_get_reset_stats_ioctl v3: Rebased on top of commit 25b3dfc87bff80317d67ddd2cd4cfb91e6fe7d79 Author: Mika Westerberg <mika.westerberg@linux.intel.com> Date: Tue Nov 12 11:57:30 2013 +0200 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Nov 26 16:14:33 2013 +0200 drm/i915: check context reset stats before relocations Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-07 06:11:21 +08:00
hs = &ctx->hang_stats;
if (hs->banned) {
DRM_DEBUG("Context %u tried to submit while banned\n", ctx_id);
drm/i915: Get context early in execbuf We need to have the address space when reserving space for the objects. Since the address space and context are tied together, and reserve occurs before context switch (for good reason), we must lookup our context earlier in the process. This leaves some room for optimizations where we no longer need to use ctx_id in certain places. This will be addressed in a subsequent patch. Important tricky bit: Because slow relocations during execbuffer drop struct_mutex Perhaps it would be best to acquire the reference when we get the context, but I'll save that for another day (note I have written the patch before, and I found the changes required to be uglier than this). Note that since we currently access everything via context id, and not the data structure this is fine, though not desirable. The next change attempts to get the context only once via the context ID idr lookup, and as such, the following can happen: CTX-A is created, refcount = 1 CTX-A execbuf, mutex dropped close IOCTL called on CTX-A, refcount = 0 CTX-A resumes in execbuf. v2: Rebased on top of commit b6359918b885da7c7b58c050674278dbd06020ab Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Wed Oct 30 15:44:16 2013 +0200 drm/i915: add i915_get_reset_stats_ioctl v3: Rebased on top of commit 25b3dfc87bff80317d67ddd2cd4cfb91e6fe7d79 Author: Mika Westerberg <mika.westerberg@linux.intel.com> Date: Tue Nov 12 11:57:30 2013 +0200 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Nov 26 16:14:33 2013 +0200 drm/i915: check context reset stats before relocations Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-07 06:11:21 +08:00
return ERR_PTR(-EIO);
}
if (i915.enable_execlists && !ctx->engine[ring->id].state) {
int ret = intel_lr_context_deferred_create(ctx, ring);
if (ret) {
DRM_DEBUG("Could not create LRC %u: %d\n", ctx_id, ret);
return ERR_PTR(ret);
}
}
drm/i915: Get context early in execbuf We need to have the address space when reserving space for the objects. Since the address space and context are tied together, and reserve occurs before context switch (for good reason), we must lookup our context earlier in the process. This leaves some room for optimizations where we no longer need to use ctx_id in certain places. This will be addressed in a subsequent patch. Important tricky bit: Because slow relocations during execbuffer drop struct_mutex Perhaps it would be best to acquire the reference when we get the context, but I'll save that for another day (note I have written the patch before, and I found the changes required to be uglier than this). Note that since we currently access everything via context id, and not the data structure this is fine, though not desirable. The next change attempts to get the context only once via the context ID idr lookup, and as such, the following can happen: CTX-A is created, refcount = 1 CTX-A execbuf, mutex dropped close IOCTL called on CTX-A, refcount = 0 CTX-A resumes in execbuf. v2: Rebased on top of commit b6359918b885da7c7b58c050674278dbd06020ab Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Wed Oct 30 15:44:16 2013 +0200 drm/i915: add i915_get_reset_stats_ioctl v3: Rebased on top of commit 25b3dfc87bff80317d67ddd2cd4cfb91e6fe7d79 Author: Mika Westerberg <mika.westerberg@linux.intel.com> Date: Tue Nov 12 11:57:30 2013 +0200 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Nov 26 16:14:33 2013 +0200 drm/i915: check context reset stats before relocations Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-07 06:11:21 +08:00
return ctx;
}
void
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
i915_gem_execbuffer_move_to_active(struct list_head *vmas,
struct intel_engine_cs *ring)
{
struct drm_i915_gem_request *req = intel_ring_get_request(ring);
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
struct i915_vma *vma;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
list_for_each_entry(vma, vmas, exec_list) {
struct drm_i915_gem_exec_object2 *entry = vma->exec_entry;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
struct drm_i915_gem_object *obj = vma->obj;
u32 old_read = obj->base.read_domains;
u32 old_write = obj->base.write_domain;
obj->base.write_domain = obj->base.pending_write_domain;
if (obj->base.write_domain == 0)
obj->base.pending_read_domains |= obj->base.read_domains;
obj->base.read_domains = obj->base.pending_read_domains;
i915_vma_move_to_active(vma, ring);
if (obj->base.write_domain) {
obj->dirty = 1;
i915_gem_request_assign(&obj->last_write_req, req);
drm/i915: Track frontbuffer invalidation/flushing So these are the guts of the new beast. This tracks when a frontbuffer gets invalidated (due to frontbuffer rendering) and hence should be constantly scaned out, and when it's flushed again and can be compressed/one-shot-upload. Rules for flushing are simple: The frontbuffer needs one more full upload starting from the next vblank. Which means that the flushing can _only_ be called once the frontbuffer update has been latched. But this poses a problem for pageflips: We can't just delay the flushing until the pageflip is latched, since that would pose the risk that we override frontbuffer rendering that has been scheduled in-between the pageflip ioctl and the actual latching. To handle this track asynchronous invalidations (and also pageflip) state per-ring and delay any in-between flushing until the rendering has completed. And also cancel any delayed flushing if we get a new invalidation request (whether delayed or not). Also call intel_mark_fb_busy in both cases in all cases to make sure that we keep the screen at the highest refresh rate both on flips, synchronous plane updates and for frontbuffer rendering. v2: Lots of improvements Suggestions from Chris: - Move invalidate/flush in flush_*_domain and set_to_*_domain. - Drop the flush in busy_ioctl since it's redundant. Was a leftover from an earlier concept to track flips/delayed flushes. - Don't forget about the initial modeset enable/final disable. Suggested by Chris. Track flips accurately, too. Since flips complete independently of rendering we need to track pending flips in a separate mask. Again if an invalidate happens we need to cancel the evenutal flush to avoid races. v3: Provide correct header declarations for flip functions. Currently not needed outside of intel_display.c, but part of the proper interface. v4: Add proper domain management to fbcon so that the fbcon buffer is also tracked correctly. v5: Fixup locking around the fbcon set_to_gtt_domain call. v6: More comments from Chris: - Split out fbcon changes. - Drop superflous checks for potential scanout before calling intel_fb functions - we can micro-optimize this later. - s/intel_fb_/intel_fb_obj_/ to make it clear that this deals in gem object. We already have precedence for fb_obj in the pin_and_fence functions. v7: Clarify the semantics of the flip flush handling by renaming things a bit: - Don't go through a gem object but take the relevant frontbuffer bits directly. These functions center on the plane, the actual object is irrelevant - even a flip to the same object as already active should cause a flush. - Add a new intel_frontbuffer_flip for synchronous plane updates. It currently just calls intel_frontbuffer_flush since the implemenation differs. This way we achieve a clear split between one-shot update events on one side and frontbuffer rendering with potentially a very long delay between the invalidate and flush. Chris and I also had some discussions about mark_busy and whether it is appropriate to call from flush. But mark busy is a state which should be derived from the 3 events (invalidate, flush, flip) we now have by the users, like psr does by tracking relevant information in psr.busy_frontbuffer_bits. DRRS (the only real use of mark_busy for frontbuffer) needs to have similar logic. With that the overall mark_busy in the core could be removed. v8: Only when retiring gpu buffers only flush frontbuffer bits we actually invalidated in a batch. Just for safety since before any additional usage/invalidate we should always retire current rendering. Suggested by Chris Wilson. v9: Actually use intel_frontbuffer_flip in all appropriate places. Spotted by Chris. v10: Address more comments from Chris: - Don't call _flip in set_base when the crtc is inactive, avoids redunancy in the modeset case with the initial enabling of all planes. - Add comments explaining that the initial/final plane enable/disable still has work left to do before it's fully generic. v11: Only invalidate for gtt/cpu access when writing. Spotted by Chris. v12: s/_flush/_flip/ in intel_overlay.c per Chris' comment. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-06-19 22:01:59 +08:00
intel_fb_obj_invalidate(obj, ring, ORIGIN_CS);
/* update for the implicit flush after a batch */
obj->base.write_domain &= ~I915_GEM_GPU_DOMAINS;
}
if (entry->flags & EXEC_OBJECT_NEEDS_FENCE) {
i915_gem_request_assign(&obj->last_fenced_req, req);
if (entry->flags & __EXEC_OBJECT_HAS_FENCE) {
struct drm_i915_private *dev_priv = to_i915(ring->dev);
list_move_tail(&dev_priv->fence_regs[obj->fence_reg].lru_list,
&dev_priv->mm.fence_list);
}
}
trace_i915_gem_object_change_domain(obj, old_read, old_write);
}
}
void
i915_gem_execbuffer_retire_commands(struct drm_device *dev,
struct drm_file *file,
struct intel_engine_cs *ring,
struct drm_i915_gem_object *obj)
{
2012-06-14 02:45:19 +08:00
/* Unconditionally force add_request to emit a full flush. */
ring->gpu_caches_dirty = true;
/* Add a breadcrumb for the completion of the batch buffer */
(void)__i915_add_request(ring, file, obj);
}
static int
i915_reset_gen7_sol_offsets(struct drm_device *dev,
struct intel_engine_cs *ring)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int ret, i;
if (!IS_GEN7(dev) || ring != &dev_priv->ring[RCS]) {
DRM_DEBUG("sol reset is gen7/rcs only\n");
return -EINVAL;
}
ret = intel_ring_begin(ring, 4 * 3);
if (ret)
return ret;
for (i = 0; i < 4; i++) {
intel_ring_emit(ring, MI_LOAD_REGISTER_IMM(1));
intel_ring_emit(ring, GEN7_SO_WRITE_OFFSET(i));
intel_ring_emit(ring, 0);
}
intel_ring_advance(ring);
return 0;
}
static int
i915_emit_box(struct intel_engine_cs *ring,
struct drm_clip_rect *box,
int DR1, int DR4)
{
int ret;
if (box->y2 <= box->y1 || box->x2 <= box->x1 ||
box->y2 <= 0 || box->x2 <= 0) {
DRM_ERROR("Bad box %d,%d..%d,%d\n",
box->x1, box->y1, box->x2, box->y2);
return -EINVAL;
}
if (INTEL_INFO(ring->dev)->gen >= 4) {
ret = intel_ring_begin(ring, 4);
if (ret)
return ret;
intel_ring_emit(ring, GFX_OP_DRAWRECT_INFO_I965);
intel_ring_emit(ring, (box->x1 & 0xffff) | box->y1 << 16);
intel_ring_emit(ring, ((box->x2 - 1) & 0xffff) | (box->y2 - 1) << 16);
intel_ring_emit(ring, DR4);
} else {
ret = intel_ring_begin(ring, 6);
if (ret)
return ret;
intel_ring_emit(ring, GFX_OP_DRAWRECT_INFO);
intel_ring_emit(ring, DR1);
intel_ring_emit(ring, (box->x1 & 0xffff) | box->y1 << 16);
intel_ring_emit(ring, ((box->x2 - 1) & 0xffff) | (box->y2 - 1) << 16);
intel_ring_emit(ring, DR4);
intel_ring_emit(ring, 0);
}
intel_ring_advance(ring);
return 0;
}
static struct drm_i915_gem_object*
i915_gem_execbuffer_parse(struct intel_engine_cs *ring,
struct drm_i915_gem_exec_object2 *shadow_exec_entry,
struct eb_vmas *eb,
struct drm_i915_gem_object *batch_obj,
u32 batch_start_offset,
u32 batch_len,
bool is_master)
{
struct drm_i915_gem_object *shadow_batch_obj;
struct i915_vma *vma;
int ret;
shadow_batch_obj = i915_gem_batch_pool_get(&ring->batch_pool,
PAGE_ALIGN(batch_len));
if (IS_ERR(shadow_batch_obj))
return shadow_batch_obj;
ret = i915_parse_cmds(ring,
batch_obj,
shadow_batch_obj,
batch_start_offset,
batch_len,
is_master);
if (ret)
goto err;
ret = i915_gem_obj_ggtt_pin(shadow_batch_obj, 0, 0);
if (ret)
goto err;
i915_gem_object_unpin_pages(shadow_batch_obj);
memset(shadow_exec_entry, 0, sizeof(*shadow_exec_entry));
vma = i915_gem_obj_to_ggtt(shadow_batch_obj);
vma->exec_entry = shadow_exec_entry;
vma->exec_entry->flags = __EXEC_OBJECT_HAS_PIN;
drm_gem_object_reference(&shadow_batch_obj->base);
list_add_tail(&vma->exec_list, &eb->vmas);
shadow_batch_obj->base.pending_read_domains = I915_GEM_DOMAIN_COMMAND;
return shadow_batch_obj;
err:
i915_gem_object_unpin_pages(shadow_batch_obj);
if (ret == -EACCES) /* unhandled chained batch */
return batch_obj;
else
return ERR_PTR(ret);
}
int
i915_gem_ringbuffer_submission(struct drm_device *dev, struct drm_file *file,
struct intel_engine_cs *ring,
struct intel_context *ctx,
struct drm_i915_gem_execbuffer2 *args,
struct list_head *vmas,
struct drm_i915_gem_object *batch_obj,
u64 exec_start, u32 dispatch_flags)
{
struct drm_clip_rect *cliprects = NULL;
struct drm_i915_private *dev_priv = dev->dev_private;
u64 exec_len;
int instp_mode;
u32 instp_mask;
int i, ret = 0;
if (args->num_cliprects != 0) {
if (ring != &dev_priv->ring[RCS]) {
DRM_DEBUG("clip rectangles are only valid with the render ring\n");
return -EINVAL;
}
if (INTEL_INFO(dev)->gen >= 5) {
DRM_DEBUG("clip rectangles are only valid on pre-gen5\n");
return -EINVAL;
}
if (args->num_cliprects > UINT_MAX / sizeof(*cliprects)) {
DRM_DEBUG("execbuf with %u cliprects\n",
args->num_cliprects);
return -EINVAL;
}
cliprects = kcalloc(args->num_cliprects,
sizeof(*cliprects),
GFP_KERNEL);
if (cliprects == NULL) {
ret = -ENOMEM;
goto error;
}
if (copy_from_user(cliprects,
to_user_ptr(args->cliprects_ptr),
sizeof(*cliprects)*args->num_cliprects)) {
ret = -EFAULT;
goto error;
}
} else {
if (args->DR4 == 0xffffffff) {
DRM_DEBUG("UXA submitting garbage DR4, fixing up\n");
args->DR4 = 0;
}
if (args->DR1 || args->DR4 || args->cliprects_ptr) {
DRM_DEBUG("0 cliprects but dirt in cliprects fields\n");
return -EINVAL;
}
}
ret = i915_gem_execbuffer_move_to_gpu(ring, vmas);
if (ret)
goto error;
ret = i915_switch_context(ring, ctx);
if (ret)
goto error;
drm/i915: Track page table reload need This patch was formerly known as, "Force pd restore when PDEs change, gen6-7." I had to change the name because it is needed for GEN8 too. The real issue this is trying to solve is when a new object is mapped into the current address space. The GPU does not snoop the new mapping so we must do the gen specific action to reload the page tables. GEN8 and GEN7 do differ in the way they load page tables for the RCS. GEN8 does so with the context restore, while GEN7 requires the proper load commands in the command streamer. Non-render is similar for both. Caveat for GEN7 The docs say you cannot change the PDEs of a currently running context. We never map new PDEs of a running context, and expect them to be present - so I think this is okay. (We can unmap, but this should also be okay since we only unmap unreferenced objects that the GPU shouldn't be tryingto va->pa xlate.) The MI_SET_CONTEXT command does have a flag to signal that even if the context is the same, force a reload. It's unclear exactly what this does, but I have a hunch it's the right thing to do. The logic assumes that we always emit a context switch after mapping new PDEs, and before we submit a batch. This is the case today, and has been the case since the inception of hardware contexts. A note in the comment let's the user know. It's not just for gen8. If the current context has mappings change, we need a context reload to switch v2: Rebased after ppgtt clean up patches. Split the warning for aliasing and true ppgtt options. And do not break aliasing ppgtt, where to->ppgtt is always null. v3: Invalidate PPGTT TLBs inside alloc_va_range. v4: Rename ppgtt_invalidate_tlbs to mark_tlbs_dirty and move pd_dirty_rings from i915_address_space to i915_hw_ppgtt. Fixes when neither ctx->ppgtt and aliasing_ppgtt exist. v5: Removed references to teardown_va_range. v6: Updated needs_pd_load_pre/post. v7: Fix pd_dirty_rings check in needs_pd_load_post, and update/move comment about updated PDEs to object_pin/bind (Mika). Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v2+) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-19 20:53:28 +08:00
if (ctx->ppgtt)
WARN(ctx->ppgtt->pd_dirty_rings & (1<<ring->id),
"%s didn't clear reload\n", ring->name);
else if (dev_priv->mm.aliasing_ppgtt)
WARN(dev_priv->mm.aliasing_ppgtt->pd_dirty_rings &
(1<<ring->id), "%s didn't clear reload\n", ring->name);
instp_mode = args->flags & I915_EXEC_CONSTANTS_MASK;
instp_mask = I915_EXEC_CONSTANTS_MASK;
switch (instp_mode) {
case I915_EXEC_CONSTANTS_REL_GENERAL:
case I915_EXEC_CONSTANTS_ABSOLUTE:
case I915_EXEC_CONSTANTS_REL_SURFACE:
if (instp_mode != 0 && ring != &dev_priv->ring[RCS]) {
DRM_DEBUG("non-0 rel constants mode on non-RCS\n");
ret = -EINVAL;
goto error;
}
if (instp_mode != dev_priv->relative_constants_mode) {
if (INTEL_INFO(dev)->gen < 4) {
DRM_DEBUG("no rel constants on pre-gen4\n");
ret = -EINVAL;
goto error;
}
if (INTEL_INFO(dev)->gen > 5 &&
instp_mode == I915_EXEC_CONSTANTS_REL_SURFACE) {
DRM_DEBUG("rel surface constants mode invalid on gen5+\n");
ret = -EINVAL;
goto error;
}
/* The HW changed the meaning on this bit on gen6 */
if (INTEL_INFO(dev)->gen >= 6)
instp_mask &= ~I915_EXEC_CONSTANTS_REL_SURFACE;
}
break;
default:
DRM_DEBUG("execbuf with unknown constants: %d\n", instp_mode);
ret = -EINVAL;
goto error;
}
if (ring == &dev_priv->ring[RCS] &&
instp_mode != dev_priv->relative_constants_mode) {
ret = intel_ring_begin(ring, 4);
if (ret)
goto error;
intel_ring_emit(ring, MI_NOOP);
intel_ring_emit(ring, MI_LOAD_REGISTER_IMM(1));
intel_ring_emit(ring, INSTPM);
intel_ring_emit(ring, instp_mask << 16 | instp_mode);
intel_ring_advance(ring);
dev_priv->relative_constants_mode = instp_mode;
}
if (args->flags & I915_EXEC_GEN7_SOL_RESET) {
ret = i915_reset_gen7_sol_offsets(dev, ring);
if (ret)
goto error;
}
exec_len = args->batch_len;
if (cliprects) {
for (i = 0; i < args->num_cliprects; i++) {
ret = i915_emit_box(ring, &cliprects[i],
args->DR1, args->DR4);
if (ret)
goto error;
ret = ring->dispatch_execbuffer(ring,
exec_start, exec_len,
dispatch_flags);
if (ret)
goto error;
}
} else {
ret = ring->dispatch_execbuffer(ring,
exec_start, exec_len,
dispatch_flags);
if (ret)
return ret;
}
trace_i915_gem_ring_dispatch(intel_ring_get_request(ring), dispatch_flags);
i915_gem_execbuffer_move_to_active(vmas, ring);
i915_gem_execbuffer_retire_commands(dev, file, ring, batch_obj);
error:
kfree(cliprects);
return ret;
}
/**
* Find one BSD ring to dispatch the corresponding BSD command.
* The Ring ID is returned.
*/
static int gen8_dispatch_bsd_ring(struct drm_device *dev,
struct drm_file *file)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_i915_file_private *file_priv = file->driver_priv;
/* Check whether the file_priv is using one ring */
if (file_priv->bsd_ring)
return file_priv->bsd_ring->id;
else {
/* If no, use the ping-pong mechanism to select one ring */
int ring_id;
mutex_lock(&dev->struct_mutex);
if (dev_priv->mm.bsd_ring_dispatch_index == 0) {
ring_id = VCS;
dev_priv->mm.bsd_ring_dispatch_index = 1;
} else {
ring_id = VCS2;
dev_priv->mm.bsd_ring_dispatch_index = 0;
}
file_priv->bsd_ring = &dev_priv->ring[ring_id];
mutex_unlock(&dev->struct_mutex);
return ring_id;
}
}
drm/i915: Prevent negative relocation deltas from wrapping This is pure evil. Userspace, I'm looking at you SNA, repacks batch buffers on the fly after generation as they are being passed to the kernel for execution. These batches also contain self-referenced relocations as a single buffer encompasses the state commands, kernels, vertices and sampler. During generation the buffers are placed at known offsets within the full batch, and then the relocation deltas (as passed to the kernel) are tweaked as the batch is repacked into a smaller buffer. This means that userspace is passing negative relocations deltas, which subsequently wrap to large values if the batch is at a low address. The GPU hangs when it then tries to use the large value as a base for its address offsets, rather than wrapping back to the real value (as one would hope). As the GPU uses positive offsets from the base, we can treat the relocation address as the minimum address read by the GPU. For the upper bound, we trust that userspace will not read beyond the end of the buffer. So, how do we fix negative relocations from wrapping? We can either check that every relocation looks valid when we write it, and then position each object such that we prevent the offset wraparound, or we just special-case the self-referential behaviour of SNA and force all batches to be above 256k. Daniel prefers the latter approach. This fixes a GPU hang when it tries to use an address (relocation + offset) greater than the GTT size. The issue would occur quite easily with full-ppgtt as each fd gets its own VM space, so low offsets would often be handed out. However, with the rearrangement of the low GTT due to capturing the BIOS framebuffer, it is already affecting kernels 3.15 onwards. I think only IVB+ is susceptible to this bug, but the workaround should only kick in rarely, so it seems sensible to always apply it. v3: Use a bias for batch buffers to prevent small negative delta relocations from wrapping. v4 from Daniel: - s/BIAS/BATCH_OFFSET_BIAS/ - Extract eb_vma_misplaced/i915_vma_misplaced since the conditions were growing rather cumbersome. - Add a comment to eb_get_batch explaining why we do this. - Apply the batch offset bias everywhere but mention that we've only observed it on gen7 gpus. - Drop PIN_OFFSET_FIX for now, that slipped in from a feature patch. v5: Add static to eb_get_batch, spotted by 0-day tester. Testcase: igt/gem_bad_reloc Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78533 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v3) Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-23 14:48:08 +08:00
static struct drm_i915_gem_object *
eb_get_batch(struct eb_vmas *eb)
{
struct i915_vma *vma = list_entry(eb->vmas.prev, typeof(*vma), exec_list);
/*
* SNA is doing fancy tricks with compressing batch buffers, which leads
* to negative relocation deltas. Usually that works out ok since the
* relocate address is still positive, except when the batch is placed
* very low in the GTT. Ensure this doesn't happen.
*
* Note that actual hangs have only been observed on gen7, but for
* paranoia do it everywhere.
*/
vma->exec_entry->flags |= __EXEC_OBJECT_NEEDS_BIAS;
return vma->obj;
}
static int
i915_gem_do_execbuffer(struct drm_device *dev, void *data,
struct drm_file *file,
struct drm_i915_gem_execbuffer2 *args,
drm/i915: Get context early in execbuf We need to have the address space when reserving space for the objects. Since the address space and context are tied together, and reserve occurs before context switch (for good reason), we must lookup our context earlier in the process. This leaves some room for optimizations where we no longer need to use ctx_id in certain places. This will be addressed in a subsequent patch. Important tricky bit: Because slow relocations during execbuffer drop struct_mutex Perhaps it would be best to acquire the reference when we get the context, but I'll save that for another day (note I have written the patch before, and I found the changes required to be uglier than this). Note that since we currently access everything via context id, and not the data structure this is fine, though not desirable. The next change attempts to get the context only once via the context ID idr lookup, and as such, the following can happen: CTX-A is created, refcount = 1 CTX-A execbuf, mutex dropped close IOCTL called on CTX-A, refcount = 0 CTX-A resumes in execbuf. v2: Rebased on top of commit b6359918b885da7c7b58c050674278dbd06020ab Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Wed Oct 30 15:44:16 2013 +0200 drm/i915: add i915_get_reset_stats_ioctl v3: Rebased on top of commit 25b3dfc87bff80317d67ddd2cd4cfb91e6fe7d79 Author: Mika Westerberg <mika.westerberg@linux.intel.com> Date: Tue Nov 12 11:57:30 2013 +0200 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Nov 26 16:14:33 2013 +0200 drm/i915: check context reset stats before relocations Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-07 06:11:21 +08:00
struct drm_i915_gem_exec_object2 *exec)
{
struct drm_i915_private *dev_priv = dev->dev_private;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
struct eb_vmas *eb;
struct drm_i915_gem_object *batch_obj;
drm/i915: Use batch pools with the command parser This patch sets up all of the tracking and copying necessary to use batch pools with the command parser and dispatches the copied (shadow) batch to the hardware. After this patch, the parser is in 'enabling' mode. Note that performance takes a hit from the copy in some cases and will likely need some work. At a rough pass, the memcpy appears to be the bottleneck. Without having done a deeper analysis, two ideas that come to mind are: 1) Copy sections of the batch at a time, as they are reached by parsing. Might improve cache locality. 2) Copy only up to the userspace-supplied batch length and memset the rest of the buffer. Reduces the number of reads. v2: - Remove setting the capacity of the pool - One global pool instead of per-ring pools - Replace batch_obj with shadow_batch_obj and hook into eb->vmas - Memset any space in the shadow batch beyond what gets copied - Rebased on execlist prep refactoring v3: - Rebase on chained batch handling - Squash in setting the secure dispatch flag - Add a note about the interaction w/secure dispatch pinning - Check for request->batch_obj == NULL in i915_gem_free_request v4: - Fix read domains for shadow_batch_obj - Remove the set_to_gtt_domain call from i915_parse_cmds - ggtt_pin/unpin in the parser block to simplify error handling - Check USES_FULL_PPGTT before setting DISPATCH_SECURE flag - Remove i915_gem_batch_pool_put calls v5: - Move 'pending_read_domains |= I915_GEM_DOMAIN_COMMAND' after the parser (danvet, from v4 0/7 feedback) Issue: VIZ-4719 Signed-off-by: Brad Volkin <bradley.d.volkin@intel.com> Reviewed-By: Jon Bloomfield <jon.bloomfield@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-12 04:13:09 +08:00
struct drm_i915_gem_exec_object2 shadow_exec_entry;
struct intel_engine_cs *ring;
struct intel_context *ctx;
drm/i915: Get context early in execbuf We need to have the address space when reserving space for the objects. Since the address space and context are tied together, and reserve occurs before context switch (for good reason), we must lookup our context earlier in the process. This leaves some room for optimizations where we no longer need to use ctx_id in certain places. This will be addressed in a subsequent patch. Important tricky bit: Because slow relocations during execbuffer drop struct_mutex Perhaps it would be best to acquire the reference when we get the context, but I'll save that for another day (note I have written the patch before, and I found the changes required to be uglier than this). Note that since we currently access everything via context id, and not the data structure this is fine, though not desirable. The next change attempts to get the context only once via the context ID idr lookup, and as such, the following can happen: CTX-A is created, refcount = 1 CTX-A execbuf, mutex dropped close IOCTL called on CTX-A, refcount = 0 CTX-A resumes in execbuf. v2: Rebased on top of commit b6359918b885da7c7b58c050674278dbd06020ab Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Wed Oct 30 15:44:16 2013 +0200 drm/i915: add i915_get_reset_stats_ioctl v3: Rebased on top of commit 25b3dfc87bff80317d67ddd2cd4cfb91e6fe7d79 Author: Mika Westerberg <mika.westerberg@linux.intel.com> Date: Tue Nov 12 11:57:30 2013 +0200 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Nov 26 16:14:33 2013 +0200 drm/i915: check context reset stats before relocations Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-07 06:11:21 +08:00
struct i915_address_space *vm;
const u32 ctx_id = i915_execbuffer2_get_context_id(*args);
u64 exec_start = args->batch_start_offset;
u32 dispatch_flags;
int ret;
bool need_relocs;
if (!i915_gem_check_execbuffer(args))
return -EINVAL;
ret = validate_exec_list(dev, exec, args->buffer_count);
if (ret)
return ret;
dispatch_flags = 0;
if (args->flags & I915_EXEC_SECURE) {
if (!file->is_master || !capable(CAP_SYS_ADMIN))
return -EPERM;
dispatch_flags |= I915_DISPATCH_SECURE;
}
if (args->flags & I915_EXEC_IS_PINNED)
dispatch_flags |= I915_DISPATCH_PINNED;
if ((args->flags & I915_EXEC_RING_MASK) > LAST_USER_RING) {
DRM_DEBUG("execbuf with unknown ring: %d\n",
(int)(args->flags & I915_EXEC_RING_MASK));
return -EINVAL;
}
if (((args->flags & I915_EXEC_RING_MASK) != I915_EXEC_BSD) &&
((args->flags & I915_EXEC_BSD_MASK) != 0)) {
DRM_DEBUG("execbuf with non bsd ring but with invalid "
"bsd dispatch flags: %d\n", (int)(args->flags));
return -EINVAL;
}
if ((args->flags & I915_EXEC_RING_MASK) == I915_EXEC_DEFAULT)
ring = &dev_priv->ring[RCS];
else if ((args->flags & I915_EXEC_RING_MASK) == I915_EXEC_BSD) {
if (HAS_BSD2(dev)) {
int ring_id;
switch (args->flags & I915_EXEC_BSD_MASK) {
case I915_EXEC_BSD_DEFAULT:
ring_id = gen8_dispatch_bsd_ring(dev, file);
ring = &dev_priv->ring[ring_id];
break;
case I915_EXEC_BSD_RING1:
ring = &dev_priv->ring[VCS];
break;
case I915_EXEC_BSD_RING2:
ring = &dev_priv->ring[VCS2];
break;
default:
DRM_DEBUG("execbuf with unknown bsd ring: %d\n",
(int)(args->flags & I915_EXEC_BSD_MASK));
return -EINVAL;
}
} else
ring = &dev_priv->ring[VCS];
} else
ring = &dev_priv->ring[(args->flags & I915_EXEC_RING_MASK) - 1];
if (!intel_ring_initialized(ring)) {
DRM_DEBUG("execbuf with invalid ring: %d\n",
(int)(args->flags & I915_EXEC_RING_MASK));
return -EINVAL;
}
if (args->buffer_count < 1) {
DRM_DEBUG("execbuf with %d buffers\n", args->buffer_count);
return -EINVAL;
}
intel_runtime_pm_get(dev_priv);
ret = i915_mutex_lock_interruptible(dev);
if (ret)
goto pre_mutex_err;
ctx = i915_gem_validate_context(dev, file, ring, ctx_id);
if (IS_ERR(ctx)) {
mutex_unlock(&dev->struct_mutex);
drm/i915: Get context early in execbuf We need to have the address space when reserving space for the objects. Since the address space and context are tied together, and reserve occurs before context switch (for good reason), we must lookup our context earlier in the process. This leaves some room for optimizations where we no longer need to use ctx_id in certain places. This will be addressed in a subsequent patch. Important tricky bit: Because slow relocations during execbuffer drop struct_mutex Perhaps it would be best to acquire the reference when we get the context, but I'll save that for another day (note I have written the patch before, and I found the changes required to be uglier than this). Note that since we currently access everything via context id, and not the data structure this is fine, though not desirable. The next change attempts to get the context only once via the context ID idr lookup, and as such, the following can happen: CTX-A is created, refcount = 1 CTX-A execbuf, mutex dropped close IOCTL called on CTX-A, refcount = 0 CTX-A resumes in execbuf. v2: Rebased on top of commit b6359918b885da7c7b58c050674278dbd06020ab Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Wed Oct 30 15:44:16 2013 +0200 drm/i915: add i915_get_reset_stats_ioctl v3: Rebased on top of commit 25b3dfc87bff80317d67ddd2cd4cfb91e6fe7d79 Author: Mika Westerberg <mika.westerberg@linux.intel.com> Date: Tue Nov 12 11:57:30 2013 +0200 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Nov 26 16:14:33 2013 +0200 drm/i915: check context reset stats before relocations Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-07 06:11:21 +08:00
ret = PTR_ERR(ctx);
goto pre_mutex_err;
}
drm/i915: Get context early in execbuf We need to have the address space when reserving space for the objects. Since the address space and context are tied together, and reserve occurs before context switch (for good reason), we must lookup our context earlier in the process. This leaves some room for optimizations where we no longer need to use ctx_id in certain places. This will be addressed in a subsequent patch. Important tricky bit: Because slow relocations during execbuffer drop struct_mutex Perhaps it would be best to acquire the reference when we get the context, but I'll save that for another day (note I have written the patch before, and I found the changes required to be uglier than this). Note that since we currently access everything via context id, and not the data structure this is fine, though not desirable. The next change attempts to get the context only once via the context ID idr lookup, and as such, the following can happen: CTX-A is created, refcount = 1 CTX-A execbuf, mutex dropped close IOCTL called on CTX-A, refcount = 0 CTX-A resumes in execbuf. v2: Rebased on top of commit b6359918b885da7c7b58c050674278dbd06020ab Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Wed Oct 30 15:44:16 2013 +0200 drm/i915: add i915_get_reset_stats_ioctl v3: Rebased on top of commit 25b3dfc87bff80317d67ddd2cd4cfb91e6fe7d79 Author: Mika Westerberg <mika.westerberg@linux.intel.com> Date: Tue Nov 12 11:57:30 2013 +0200 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Nov 26 16:14:33 2013 +0200 drm/i915: check context reset stats before relocations Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-07 06:11:21 +08:00
i915_gem_context_reference(ctx);
if (ctx->ppgtt)
vm = &ctx->ppgtt->base;
else
vm = &dev_priv->gtt.base;
eb = eb_create(args);
if (eb == NULL) {
i915_gem_context_unreference(ctx);
mutex_unlock(&dev->struct_mutex);
ret = -ENOMEM;
goto pre_mutex_err;
}
/* Look up object handles */
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
ret = eb_lookup_vmas(eb, exec, args, vm, file);
if (ret)
goto err;
/* take note of the batch buffer before we might reorder the lists */
drm/i915: Prevent negative relocation deltas from wrapping This is pure evil. Userspace, I'm looking at you SNA, repacks batch buffers on the fly after generation as they are being passed to the kernel for execution. These batches also contain self-referenced relocations as a single buffer encompasses the state commands, kernels, vertices and sampler. During generation the buffers are placed at known offsets within the full batch, and then the relocation deltas (as passed to the kernel) are tweaked as the batch is repacked into a smaller buffer. This means that userspace is passing negative relocations deltas, which subsequently wrap to large values if the batch is at a low address. The GPU hangs when it then tries to use the large value as a base for its address offsets, rather than wrapping back to the real value (as one would hope). As the GPU uses positive offsets from the base, we can treat the relocation address as the minimum address read by the GPU. For the upper bound, we trust that userspace will not read beyond the end of the buffer. So, how do we fix negative relocations from wrapping? We can either check that every relocation looks valid when we write it, and then position each object such that we prevent the offset wraparound, or we just special-case the self-referential behaviour of SNA and force all batches to be above 256k. Daniel prefers the latter approach. This fixes a GPU hang when it tries to use an address (relocation + offset) greater than the GTT size. The issue would occur quite easily with full-ppgtt as each fd gets its own VM space, so low offsets would often be handed out. However, with the rearrangement of the low GTT due to capturing the BIOS framebuffer, it is already affecting kernels 3.15 onwards. I think only IVB+ is susceptible to this bug, but the workaround should only kick in rarely, so it seems sensible to always apply it. v3: Use a bias for batch buffers to prevent small negative delta relocations from wrapping. v4 from Daniel: - s/BIAS/BATCH_OFFSET_BIAS/ - Extract eb_vma_misplaced/i915_vma_misplaced since the conditions were growing rather cumbersome. - Add a comment to eb_get_batch explaining why we do this. - Apply the batch offset bias everywhere but mention that we've only observed it on gen7 gpus. - Drop PIN_OFFSET_FIX for now, that slipped in from a feature patch. v5: Add static to eb_get_batch, spotted by 0-day tester. Testcase: igt/gem_bad_reloc Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78533 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v3) Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-23 14:48:08 +08:00
batch_obj = eb_get_batch(eb);
/* Move the objects en-masse into the GTT, evicting if necessary. */
need_relocs = (args->flags & I915_EXEC_NO_RELOC) == 0;
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
ret = i915_gem_execbuffer_reserve(ring, &eb->vmas, &need_relocs);
if (ret)
goto err;
/* The objects are in their final locations, apply the relocations. */
if (need_relocs)
ret = i915_gem_execbuffer_relocate(eb);
if (ret) {
if (ret == -EFAULT) {
ret = i915_gem_execbuffer_relocate_slow(dev, args, file, ring,
drm/i915: Convert execbuf code to use vmas In order to transition more of our code over to using a VMA instead of an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up until now, we've only had a VMA when actually binding an object. The previous patch helped handle the distinction on bound vs. unbound. This patch will help us catch leaks, and other issues before we actually shuffle a bunch of stuff around. This attempts to convert all the execbuf code to speak in vmas. Since the execbuf code is very self contained it was a nice isolated conversion. The meat of the code is about turning eb_objects into eb_vma, and then wiring up the rest of the code to use vmas instead of obj, vm pairs. Unfortunately, to do this, we must move the exec_list link from the obj structure. This list is reused in the eviction code, so we must also modify the eviction code to make this work. WARNING: This patch makes an already hotly profiled path slower. The cost is unavoidable. In reply to this mail, I will attach the extra data. v2: Release table lock early, and two a 2 phase vma lookup to avoid having to use a GFP_ATOMIC. (Chris) v3: s/obj_exec_list/obj_exec_link/ Updates to address commit 6d2b888569d366beb4be72cacfde41adee2c25e1 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Aug 7 18:30:54 2013 +0100 drm/i915: List objects allocated from stolen memory in debugfs v4: Use obj = vma->obj for neatness in some places (Chris) need_reloc_mappable() should return false if ppgtt (Chris) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Split out prep patches. Also remove a FIXME comment which is now taken care of.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-14 17:38:36 +08:00
eb, exec);
BUG_ON(!mutex_is_locked(&dev->struct_mutex));
}
if (ret)
goto err;
}
/* Set the pending read domains for the batch buffer to COMMAND */
if (batch_obj->base.pending_write_domain) {
DRM_DEBUG("Attempting to use self-modifying batch buffer\n");
ret = -EINVAL;
goto err;
}
if (i915_needs_cmd_parser(ring) && args->batch_len) {
batch_obj = i915_gem_execbuffer_parse(ring,
&shadow_exec_entry,
eb,
batch_obj,
args->batch_start_offset,
args->batch_len,
file->is_master);
if (IS_ERR(batch_obj)) {
ret = PTR_ERR(batch_obj);
drm/i915: Use batch pools with the command parser This patch sets up all of the tracking and copying necessary to use batch pools with the command parser and dispatches the copied (shadow) batch to the hardware. After this patch, the parser is in 'enabling' mode. Note that performance takes a hit from the copy in some cases and will likely need some work. At a rough pass, the memcpy appears to be the bottleneck. Without having done a deeper analysis, two ideas that come to mind are: 1) Copy sections of the batch at a time, as they are reached by parsing. Might improve cache locality. 2) Copy only up to the userspace-supplied batch length and memset the rest of the buffer. Reduces the number of reads. v2: - Remove setting the capacity of the pool - One global pool instead of per-ring pools - Replace batch_obj with shadow_batch_obj and hook into eb->vmas - Memset any space in the shadow batch beyond what gets copied - Rebased on execlist prep refactoring v3: - Rebase on chained batch handling - Squash in setting the secure dispatch flag - Add a note about the interaction w/secure dispatch pinning - Check for request->batch_obj == NULL in i915_gem_free_request v4: - Fix read domains for shadow_batch_obj - Remove the set_to_gtt_domain call from i915_parse_cmds - ggtt_pin/unpin in the parser block to simplify error handling - Check USES_FULL_PPGTT before setting DISPATCH_SECURE flag - Remove i915_gem_batch_pool_put calls v5: - Move 'pending_read_domains |= I915_GEM_DOMAIN_COMMAND' after the parser (danvet, from v4 0/7 feedback) Issue: VIZ-4719 Signed-off-by: Brad Volkin <bradley.d.volkin@intel.com> Reviewed-By: Jon Bloomfield <jon.bloomfield@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-12 04:13:09 +08:00
goto err;
}
/*
* Set the DISPATCH_SECURE bit to remove the NON_SECURE
* bit from MI_BATCH_BUFFER_START commands issued in the
* dispatch_execbuffer implementations. We specifically
* don't want that set when the command parser is
* enabled.
*
* FIXME: with aliasing ppgtt, buffers that should only
* be in ggtt still end up in the aliasing ppgtt. remove
* this check when that is fixed.
*/
if (USES_FULL_PPGTT(dev))
dispatch_flags |= I915_DISPATCH_SECURE;
exec_start = 0;
}
drm/i915: Use batch pools with the command parser This patch sets up all of the tracking and copying necessary to use batch pools with the command parser and dispatches the copied (shadow) batch to the hardware. After this patch, the parser is in 'enabling' mode. Note that performance takes a hit from the copy in some cases and will likely need some work. At a rough pass, the memcpy appears to be the bottleneck. Without having done a deeper analysis, two ideas that come to mind are: 1) Copy sections of the batch at a time, as they are reached by parsing. Might improve cache locality. 2) Copy only up to the userspace-supplied batch length and memset the rest of the buffer. Reduces the number of reads. v2: - Remove setting the capacity of the pool - One global pool instead of per-ring pools - Replace batch_obj with shadow_batch_obj and hook into eb->vmas - Memset any space in the shadow batch beyond what gets copied - Rebased on execlist prep refactoring v3: - Rebase on chained batch handling - Squash in setting the secure dispatch flag - Add a note about the interaction w/secure dispatch pinning - Check for request->batch_obj == NULL in i915_gem_free_request v4: - Fix read domains for shadow_batch_obj - Remove the set_to_gtt_domain call from i915_parse_cmds - ggtt_pin/unpin in the parser block to simplify error handling - Check USES_FULL_PPGTT before setting DISPATCH_SECURE flag - Remove i915_gem_batch_pool_put calls v5: - Move 'pending_read_domains |= I915_GEM_DOMAIN_COMMAND' after the parser (danvet, from v4 0/7 feedback) Issue: VIZ-4719 Signed-off-by: Brad Volkin <bradley.d.volkin@intel.com> Reviewed-By: Jon Bloomfield <jon.bloomfield@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-12 04:13:09 +08:00
batch_obj->base.pending_read_domains |= I915_GEM_DOMAIN_COMMAND;
/* snb/ivb/vlv conflate the "batch in ppgtt" bit with the "non-secure
* batch" bit. Hence we need to pin secure batches into the global gtt.
* hsw should have this fixed, but bdw mucks it up again. */
if (dispatch_flags & I915_DISPATCH_SECURE) {
/*
* So on first glance it looks freaky that we pin the batch here
* outside of the reservation loop. But:
* - The batch is already pinned into the relevant ppgtt, so we
* already have the backing storage fully allocated.
* - No other BO uses the global gtt (well contexts, but meh),
* so we don't really have issues with multiple objects not
* fitting due to fragmentation.
* So this is actually safe.
*/
ret = i915_gem_obj_ggtt_pin(batch_obj, 0, 0);
if (ret)
goto err;
exec_start += i915_gem_obj_ggtt_offset(batch_obj);
} else
exec_start += i915_gem_obj_offset(batch_obj, vm);
ret = dev_priv->gt.execbuf_submit(dev, file, ring, ctx, args,
&eb->vmas, batch_obj, exec_start,
dispatch_flags);
/*
* FIXME: We crucially rely upon the active tracking for the (ppgtt)
* batch vma for correctness. For less ugly and less fragility this
* needs to be adjusted to also track the ggtt batch vma properly as
* active.
*/
if (dispatch_flags & I915_DISPATCH_SECURE)
i915_gem_object_ggtt_unpin(batch_obj);
err:
drm/i915: Get context early in execbuf We need to have the address space when reserving space for the objects. Since the address space and context are tied together, and reserve occurs before context switch (for good reason), we must lookup our context earlier in the process. This leaves some room for optimizations where we no longer need to use ctx_id in certain places. This will be addressed in a subsequent patch. Important tricky bit: Because slow relocations during execbuffer drop struct_mutex Perhaps it would be best to acquire the reference when we get the context, but I'll save that for another day (note I have written the patch before, and I found the changes required to be uglier than this). Note that since we currently access everything via context id, and not the data structure this is fine, though not desirable. The next change attempts to get the context only once via the context ID idr lookup, and as such, the following can happen: CTX-A is created, refcount = 1 CTX-A execbuf, mutex dropped close IOCTL called on CTX-A, refcount = 0 CTX-A resumes in execbuf. v2: Rebased on top of commit b6359918b885da7c7b58c050674278dbd06020ab Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Wed Oct 30 15:44:16 2013 +0200 drm/i915: add i915_get_reset_stats_ioctl v3: Rebased on top of commit 25b3dfc87bff80317d67ddd2cd4cfb91e6fe7d79 Author: Mika Westerberg <mika.westerberg@linux.intel.com> Date: Tue Nov 12 11:57:30 2013 +0200 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Nov 26 16:14:33 2013 +0200 drm/i915: check context reset stats before relocations Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-07 06:11:21 +08:00
/* the request owns the ref now */
i915_gem_context_unreference(ctx);
eb_destroy(eb);
mutex_unlock(&dev->struct_mutex);
pre_mutex_err:
/* intel_gpu_busy should also get a ref, so it will free when the device
* is really idle. */
intel_runtime_pm_put(dev_priv);
return ret;
}
/*
* Legacy execbuffer just creates an exec2 list from the original exec object
* list array and passes it to the real function.
*/
int
i915_gem_execbuffer(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct drm_i915_gem_execbuffer *args = data;
struct drm_i915_gem_execbuffer2 exec2;
struct drm_i915_gem_exec_object *exec_list = NULL;
struct drm_i915_gem_exec_object2 *exec2_list = NULL;
int ret, i;
if (args->buffer_count < 1) {
DRM_DEBUG("execbuf with %d buffers\n", args->buffer_count);
return -EINVAL;
}
/* Copy in the exec list from userland */
exec_list = drm_malloc_ab(sizeof(*exec_list), args->buffer_count);
exec2_list = drm_malloc_ab(sizeof(*exec2_list), args->buffer_count);
if (exec_list == NULL || exec2_list == NULL) {
DRM_DEBUG("Failed to allocate exec list for %d buffers\n",
args->buffer_count);
drm_free_large(exec_list);
drm_free_large(exec2_list);
return -ENOMEM;
}
ret = copy_from_user(exec_list,
to_user_ptr(args->buffers_ptr),
sizeof(*exec_list) * args->buffer_count);
if (ret != 0) {
DRM_DEBUG("copy %d exec entries failed %d\n",
args->buffer_count, ret);
drm_free_large(exec_list);
drm_free_large(exec2_list);
return -EFAULT;
}
for (i = 0; i < args->buffer_count; i++) {
exec2_list[i].handle = exec_list[i].handle;
exec2_list[i].relocation_count = exec_list[i].relocation_count;
exec2_list[i].relocs_ptr = exec_list[i].relocs_ptr;
exec2_list[i].alignment = exec_list[i].alignment;
exec2_list[i].offset = exec_list[i].offset;
if (INTEL_INFO(dev)->gen < 4)
exec2_list[i].flags = EXEC_OBJECT_NEEDS_FENCE;
else
exec2_list[i].flags = 0;
}
exec2.buffers_ptr = args->buffers_ptr;
exec2.buffer_count = args->buffer_count;
exec2.batch_start_offset = args->batch_start_offset;
exec2.batch_len = args->batch_len;
exec2.DR1 = args->DR1;
exec2.DR4 = args->DR4;
exec2.num_cliprects = args->num_cliprects;
exec2.cliprects_ptr = args->cliprects_ptr;
exec2.flags = I915_EXEC_RENDER;
i915_execbuffer2_set_context_id(exec2, 0);
drm/i915: Get context early in execbuf We need to have the address space when reserving space for the objects. Since the address space and context are tied together, and reserve occurs before context switch (for good reason), we must lookup our context earlier in the process. This leaves some room for optimizations where we no longer need to use ctx_id in certain places. This will be addressed in a subsequent patch. Important tricky bit: Because slow relocations during execbuffer drop struct_mutex Perhaps it would be best to acquire the reference when we get the context, but I'll save that for another day (note I have written the patch before, and I found the changes required to be uglier than this). Note that since we currently access everything via context id, and not the data structure this is fine, though not desirable. The next change attempts to get the context only once via the context ID idr lookup, and as such, the following can happen: CTX-A is created, refcount = 1 CTX-A execbuf, mutex dropped close IOCTL called on CTX-A, refcount = 0 CTX-A resumes in execbuf. v2: Rebased on top of commit b6359918b885da7c7b58c050674278dbd06020ab Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Wed Oct 30 15:44:16 2013 +0200 drm/i915: add i915_get_reset_stats_ioctl v3: Rebased on top of commit 25b3dfc87bff80317d67ddd2cd4cfb91e6fe7d79 Author: Mika Westerberg <mika.westerberg@linux.intel.com> Date: Tue Nov 12 11:57:30 2013 +0200 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Nov 26 16:14:33 2013 +0200 drm/i915: check context reset stats before relocations Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-07 06:11:21 +08:00
ret = i915_gem_do_execbuffer(dev, data, file, &exec2, exec2_list);
if (!ret) {
struct drm_i915_gem_exec_object __user *user_exec_list =
to_user_ptr(args->buffers_ptr);
/* Copy the new buffer offsets back to the user's exec list. */
for (i = 0; i < args->buffer_count; i++) {
ret = __copy_to_user(&user_exec_list[i].offset,
&exec2_list[i].offset,
sizeof(user_exec_list[i].offset));
if (ret) {
ret = -EFAULT;
DRM_DEBUG("failed to copy %d exec entries "
"back to user (%d)\n",
args->buffer_count, ret);
break;
}
}
}
drm_free_large(exec_list);
drm_free_large(exec2_list);
return ret;
}
int
i915_gem_execbuffer2(struct drm_device *dev, void *data,
struct drm_file *file)
{
struct drm_i915_gem_execbuffer2 *args = data;
struct drm_i915_gem_exec_object2 *exec2_list = NULL;
int ret;
if (args->buffer_count < 1 ||
args->buffer_count > UINT_MAX / sizeof(*exec2_list)) {
DRM_DEBUG("execbuf2 with %d buffers\n", args->buffer_count);
return -EINVAL;
}
if (args->rsvd2 != 0) {
DRM_DEBUG("dirty rvsd2 field\n");
return -EINVAL;
}
exec2_list = kmalloc(sizeof(*exec2_list)*args->buffer_count,
GFP_TEMPORARY | __GFP_NOWARN | __GFP_NORETRY);
if (exec2_list == NULL)
exec2_list = drm_malloc_ab(sizeof(*exec2_list),
args->buffer_count);
if (exec2_list == NULL) {
DRM_DEBUG("Failed to allocate exec list for %d buffers\n",
args->buffer_count);
return -ENOMEM;
}
ret = copy_from_user(exec2_list,
to_user_ptr(args->buffers_ptr),
sizeof(*exec2_list) * args->buffer_count);
if (ret != 0) {
DRM_DEBUG("copy %d exec entries failed %d\n",
args->buffer_count, ret);
drm_free_large(exec2_list);
return -EFAULT;
}
drm/i915: Get context early in execbuf We need to have the address space when reserving space for the objects. Since the address space and context are tied together, and reserve occurs before context switch (for good reason), we must lookup our context earlier in the process. This leaves some room for optimizations where we no longer need to use ctx_id in certain places. This will be addressed in a subsequent patch. Important tricky bit: Because slow relocations during execbuffer drop struct_mutex Perhaps it would be best to acquire the reference when we get the context, but I'll save that for another day (note I have written the patch before, and I found the changes required to be uglier than this). Note that since we currently access everything via context id, and not the data structure this is fine, though not desirable. The next change attempts to get the context only once via the context ID idr lookup, and as such, the following can happen: CTX-A is created, refcount = 1 CTX-A execbuf, mutex dropped close IOCTL called on CTX-A, refcount = 0 CTX-A resumes in execbuf. v2: Rebased on top of commit b6359918b885da7c7b58c050674278dbd06020ab Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Wed Oct 30 15:44:16 2013 +0200 drm/i915: add i915_get_reset_stats_ioctl v3: Rebased on top of commit 25b3dfc87bff80317d67ddd2cd4cfb91e6fe7d79 Author: Mika Westerberg <mika.westerberg@linux.intel.com> Date: Tue Nov 12 11:57:30 2013 +0200 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Nov 26 16:14:33 2013 +0200 drm/i915: check context reset stats before relocations Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-07 06:11:21 +08:00
ret = i915_gem_do_execbuffer(dev, data, file, args, exec2_list);
if (!ret) {
/* Copy the new buffer offsets back to the user's exec list. */
struct drm_i915_gem_exec_object2 __user *user_exec_list =
to_user_ptr(args->buffers_ptr);
int i;
for (i = 0; i < args->buffer_count; i++) {
ret = __copy_to_user(&user_exec_list[i].offset,
&exec2_list[i].offset,
sizeof(user_exec_list[i].offset));
if (ret) {
ret = -EFAULT;
DRM_DEBUG("failed to copy %d exec entries "
"back to user\n",
args->buffer_count);
break;
}
}
}
drm_free_large(exec2_list);
return ret;
}