OpenCloudOS-Kernel/sound/soc/omap/ams-delta.c

601 lines
16 KiB
C
Raw Normal View History

ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
/*
* ams-delta.c -- SoC audio for Amstrad E3 (Delta) videophone
*
* Copyright (C) 2009 Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
*
* Initially based on sound/soc/omap/osk5912.x
* Copyright (C) 2008 Mistral Solutions
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
#include <linux/gpio.h>
#include <linux/spinlock.h>
#include <linux/tty.h>
#include <linux/module.h>
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 21:53:46 +08:00
#include <sound/soc.h>
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
#include <sound/jack.h>
#include <asm/mach-types.h>
#include <mach/board-ams-delta.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
#include "omap-mcbsp.h"
#include "../codecs/cx20442.h"
/* Board specific DAPM widgets */
static const struct snd_soc_dapm_widget ams_delta_dapm_widgets[] = {
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
/* Handset */
SND_SOC_DAPM_MIC("Mouthpiece", NULL),
SND_SOC_DAPM_HP("Earpiece", NULL),
/* Handsfree/Speakerphone */
SND_SOC_DAPM_MIC("Microphone", NULL),
SND_SOC_DAPM_SPK("Speaker", NULL),
};
/* How they are connected to codec pins */
static const struct snd_soc_dapm_route ams_delta_audio_map[] = {
{"TELIN", NULL, "Mouthpiece"},
{"Earpiece", NULL, "TELOUT"},
{"MIC", NULL, "Microphone"},
{"Speaker", NULL, "SPKOUT"},
};
/*
* Controls, functional after the modem line discipline is activated.
*/
/* Virtual switch: audio input/output constellations */
static const char *ams_delta_audio_mode[] =
{"Mixed", "Handset", "Handsfree", "Speakerphone"};
/* Selection <-> pin translation */
#define AMS_DELTA_MOUTHPIECE 0
#define AMS_DELTA_EARPIECE 1
#define AMS_DELTA_MICROPHONE 2
#define AMS_DELTA_SPEAKER 3
#define AMS_DELTA_AGC 4
#define AMS_DELTA_MIXED ((1 << AMS_DELTA_EARPIECE) | \
(1 << AMS_DELTA_MICROPHONE))
#define AMS_DELTA_HANDSET ((1 << AMS_DELTA_MOUTHPIECE) | \
(1 << AMS_DELTA_EARPIECE))
#define AMS_DELTA_HANDSFREE ((1 << AMS_DELTA_MICROPHONE) | \
(1 << AMS_DELTA_SPEAKER))
#define AMS_DELTA_SPEAKERPHONE (AMS_DELTA_HANDSFREE | (1 << AMS_DELTA_AGC))
static const unsigned short ams_delta_audio_mode_pins[] = {
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
AMS_DELTA_MIXED,
AMS_DELTA_HANDSET,
AMS_DELTA_HANDSFREE,
AMS_DELTA_SPEAKERPHONE,
};
static unsigned short ams_delta_audio_agc;
/*
* Used for passing a codec structure pointer
* from the board initialization code to the tty line discipline.
*/
static struct snd_soc_codec *cx20442_codec;
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
static int ams_delta_set_audio_mode(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_card *card = snd_kcontrol_chip(kcontrol);
struct snd_soc_dapm_context *dapm = &card->dapm;
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
struct soc_enum *control = (struct soc_enum *)kcontrol->private_value;
unsigned short pins;
int pin, changed = 0;
/* Refuse any mode changes if we are not able to control the codec. */
if (!cx20442_codec->hw_write)
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
return -EUNATCH;
if (ucontrol->value.enumerated.item[0] >= control->items)
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
return -EINVAL;
snd_soc_dapm_mutex_lock(dapm);
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
/* Translate selection to bitmap */
pins = ams_delta_audio_mode_pins[ucontrol->value.enumerated.item[0]];
/* Setup pins after corresponding bits if changed */
pin = !!(pins & (1 << AMS_DELTA_MOUTHPIECE));
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 21:53:46 +08:00
if (pin != snd_soc_dapm_get_pin_status(dapm, "Mouthpiece")) {
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
changed = 1;
if (pin)
snd_soc_dapm_enable_pin_unlocked(dapm, "Mouthpiece");
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
else
snd_soc_dapm_disable_pin_unlocked(dapm, "Mouthpiece");
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
}
pin = !!(pins & (1 << AMS_DELTA_EARPIECE));
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 21:53:46 +08:00
if (pin != snd_soc_dapm_get_pin_status(dapm, "Earpiece")) {
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
changed = 1;
if (pin)
snd_soc_dapm_enable_pin_unlocked(dapm, "Earpiece");
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
else
snd_soc_dapm_disable_pin_unlocked(dapm, "Earpiece");
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
}
pin = !!(pins & (1 << AMS_DELTA_MICROPHONE));
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 21:53:46 +08:00
if (pin != snd_soc_dapm_get_pin_status(dapm, "Microphone")) {
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
changed = 1;
if (pin)
snd_soc_dapm_enable_pin_unlocked(dapm, "Microphone");
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
else
snd_soc_dapm_disable_pin_unlocked(dapm, "Microphone");
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
}
pin = !!(pins & (1 << AMS_DELTA_SPEAKER));
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 21:53:46 +08:00
if (pin != snd_soc_dapm_get_pin_status(dapm, "Speaker")) {
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
changed = 1;
if (pin)
snd_soc_dapm_enable_pin_unlocked(dapm, "Speaker");
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
else
snd_soc_dapm_disable_pin_unlocked(dapm, "Speaker");
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
}
pin = !!(pins & (1 << AMS_DELTA_AGC));
if (pin != ams_delta_audio_agc) {
ams_delta_audio_agc = pin;
changed = 1;
if (pin)
snd_soc_dapm_enable_pin_unlocked(dapm, "AGCIN");
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
else
snd_soc_dapm_disable_pin_unlocked(dapm, "AGCIN");
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
}
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
if (changed)
snd_soc_dapm_sync_unlocked(dapm);
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
snd_soc_dapm_mutex_unlock(dapm);
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
return changed;
}
static int ams_delta_get_audio_mode(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_card *card = snd_kcontrol_chip(kcontrol);
struct snd_soc_dapm_context *dapm = &card->dapm;
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
unsigned short pins, mode;
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 21:53:46 +08:00
pins = ((snd_soc_dapm_get_pin_status(dapm, "Mouthpiece") <<
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
AMS_DELTA_MOUTHPIECE) |
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 21:53:46 +08:00
(snd_soc_dapm_get_pin_status(dapm, "Earpiece") <<
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
AMS_DELTA_EARPIECE));
if (pins)
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 21:53:46 +08:00
pins |= (snd_soc_dapm_get_pin_status(dapm, "Microphone") <<
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
AMS_DELTA_MICROPHONE);
else
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 21:53:46 +08:00
pins = ((snd_soc_dapm_get_pin_status(dapm, "Microphone") <<
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
AMS_DELTA_MICROPHONE) |
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 21:53:46 +08:00
(snd_soc_dapm_get_pin_status(dapm, "Speaker") <<
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
AMS_DELTA_SPEAKER) |
(ams_delta_audio_agc << AMS_DELTA_AGC));
for (mode = 0; mode < ARRAY_SIZE(ams_delta_audio_mode); mode++)
if (pins == ams_delta_audio_mode_pins[mode])
break;
if (mode >= ARRAY_SIZE(ams_delta_audio_mode))
return -EINVAL;
ucontrol->value.enumerated.item[0] = mode;
return 0;
}
static const SOC_ENUM_SINGLE_EXT_DECL(ams_delta_audio_enum,
ams_delta_audio_mode);
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
static const struct snd_kcontrol_new ams_delta_audio_controls[] = {
SOC_ENUM_EXT("Audio Mode", ams_delta_audio_enum,
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
ams_delta_get_audio_mode, ams_delta_set_audio_mode),
};
/* Hook switch */
static struct snd_soc_jack ams_delta_hook_switch;
static struct snd_soc_jack_gpio ams_delta_hook_switch_gpios[] = {
{
.gpio = 4,
.name = "hook_switch",
.report = SND_JACK_HEADSET,
.invert = 1,
.debounce_time = 150,
}
};
/* After we are able to control the codec over the modem,
* the hook switch can be used for dynamic DAPM reconfiguration. */
static struct snd_soc_jack_pin ams_delta_hook_switch_pins[] = {
/* Handset */
{
.pin = "Mouthpiece",
.mask = SND_JACK_MICROPHONE,
},
{
.pin = "Earpiece",
.mask = SND_JACK_HEADPHONE,
},
/* Handsfree */
{
.pin = "Microphone",
.mask = SND_JACK_MICROPHONE,
.invert = 1,
},
{
.pin = "Speaker",
.mask = SND_JACK_HEADPHONE,
.invert = 1,
},
};
/*
* Modem line discipline, required for making above controls functional.
* Activated from userspace with ldattach, possibly invoked from udev rule.
*/
/* To actually apply any modem controlled configuration changes to the codec,
* we must connect codec DAI pins to the modem for a moment. Be careful not
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
* to interfere with our digital mute function that shares the same hardware. */
static struct timer_list cx81801_timer;
static bool cx81801_cmd_pending;
static bool ams_delta_muted;
static DEFINE_SPINLOCK(ams_delta_lock);
static void cx81801_timeout(unsigned long data)
{
int muted;
spin_lock(&ams_delta_lock);
cx81801_cmd_pending = 0;
muted = ams_delta_muted;
spin_unlock(&ams_delta_lock);
/* Reconnect the codec DAI back from the modem to the CPU DAI
* only if digital mute still off */
if (!muted)
ams_delta_latch2_write(AMS_DELTA_LATCH2_MODEM_CODEC, 0);
}
/* Line discipline .open() */
static int cx81801_open(struct tty_struct *tty)
{
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-18 04:15:21 +08:00
int ret;
if (!cx20442_codec)
return -ENODEV;
/*
* Pass the codec structure pointer for use by other ldisc callbacks,
* both the card and the codec specific parts.
*/
tty->disc_data = cx20442_codec;
ret = v253_ops.open(tty);
if (ret < 0)
tty->disc_data = NULL;
return ret;
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
}
/* Line discipline .close() */
static void cx81801_close(struct tty_struct *tty)
{
struct snd_soc_codec *codec = tty->disc_data;
struct snd_soc_dapm_context *dapm = &codec->component.card->dapm;
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
del_timer_sync(&cx81801_timer);
/* Prevent the hook switch from further changing the DAPM pins */
INIT_LIST_HEAD(&ams_delta_hook_switch.pins);
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-18 04:15:21 +08:00
if (!codec)
return;
v253_ops.close(tty);
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
/* Revert back to default audio input/output constellation */
snd_soc_dapm_mutex_lock(dapm);
snd_soc_dapm_disable_pin_unlocked(dapm, "Mouthpiece");
snd_soc_dapm_enable_pin_unlocked(dapm, "Earpiece");
snd_soc_dapm_enable_pin_unlocked(dapm, "Microphone");
snd_soc_dapm_disable_pin_unlocked(dapm, "Speaker");
snd_soc_dapm_disable_pin_unlocked(dapm, "AGCIN");
snd_soc_dapm_sync_unlocked(dapm);
snd_soc_dapm_mutex_unlock(dapm);
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
}
/* Line discipline .hangup() */
static int cx81801_hangup(struct tty_struct *tty)
{
cx81801_close(tty);
return 0;
}
/* Line discipline .receive_buf() */
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
static void cx81801_receive(struct tty_struct *tty,
const unsigned char *cp, char *fp, int count)
{
struct snd_soc_codec *codec = tty->disc_data;
const unsigned char *c;
int apply, ret;
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-18 04:15:21 +08:00
if (!codec)
return;
if (!codec->hw_write) {
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
/* First modem response, complete setup procedure */
/* Initialize timer used for config pulse generation */
setup_timer(&cx81801_timer, cx81801_timeout, 0);
v253_ops.receive_buf(tty, cp, fp, count);
/* Link hook switch to DAPM pins */
ret = snd_soc_jack_add_pins(&ams_delta_hook_switch,
ARRAY_SIZE(ams_delta_hook_switch_pins),
ams_delta_hook_switch_pins);
if (ret)
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-18 04:15:21 +08:00
dev_warn(codec->dev,
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
"Failed to link hook switch to DAPM pins, "
"will continue with hook switch unlinked.\n");
return;
}
v253_ops.receive_buf(tty, cp, fp, count);
for (c = &cp[count - 1]; c >= cp; c--) {
if (*c != '\r')
continue;
/* Complete modem response received, apply config to codec */
spin_lock_bh(&ams_delta_lock);
mod_timer(&cx81801_timer, jiffies + msecs_to_jiffies(150));
apply = !ams_delta_muted && !cx81801_cmd_pending;
cx81801_cmd_pending = 1;
spin_unlock_bh(&ams_delta_lock);
/* Apply config pulse by connecting the codec to the modem
* if not already done */
if (apply)
ams_delta_latch2_write(AMS_DELTA_LATCH2_MODEM_CODEC,
AMS_DELTA_LATCH2_MODEM_CODEC);
break;
}
}
/* Line discipline .write_wakeup() */
static void cx81801_wakeup(struct tty_struct *tty)
{
v253_ops.write_wakeup(tty);
}
static struct tty_ldisc_ops cx81801_ops = {
.magic = TTY_LDISC_MAGIC,
.name = "cx81801",
.owner = THIS_MODULE,
.open = cx81801_open,
.close = cx81801_close,
.hangup = cx81801_hangup,
.receive_buf = cx81801_receive,
.write_wakeup = cx81801_wakeup,
};
/*
* Even if not very useful, the sound card can still work without any of the
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
* above functonality activated. You can still control its audio input/output
* constellation and speakerphone gain from userspace by issuing AT commands
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
* over the modem port.
*/
static struct snd_soc_ops ams_delta_ops;
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
/* Digital mute implemented using modem/CPU multiplexer.
* Shares hardware with codec config pulse generation */
static bool ams_delta_muted = 1;
static int ams_delta_digital_mute(struct snd_soc_dai *dai, int mute)
{
int apply;
if (ams_delta_muted == mute)
return 0;
spin_lock_bh(&ams_delta_lock);
ams_delta_muted = mute;
apply = !cx81801_cmd_pending;
spin_unlock_bh(&ams_delta_lock);
if (apply)
ams_delta_latch2_write(AMS_DELTA_LATCH2_MODEM_CODEC,
mute ? AMS_DELTA_LATCH2_MODEM_CODEC : 0);
return 0;
}
/* Our codec DAI probably doesn't have its own .ops structure */
static const struct snd_soc_dai_ops ams_delta_dai_ops = {
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
.digital_mute = ams_delta_digital_mute,
};
/* Will be used if the codec ever has its own digital_mute function */
static int ams_delta_startup(struct snd_pcm_substream *substream)
{
return ams_delta_digital_mute(NULL, 0);
}
static void ams_delta_shutdown(struct snd_pcm_substream *substream)
{
ams_delta_digital_mute(NULL, 1);
}
/*
* Card initialization
*/
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-18 04:15:21 +08:00
static int ams_delta_cx20442_init(struct snd_soc_pcm_runtime *rtd)
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
{
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-18 04:15:21 +08:00
struct snd_soc_dai *codec_dai = rtd->codec_dai;
struct snd_soc_card *card = rtd->card;
struct snd_soc_dapm_context *dapm = &card->dapm;
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
int ret;
/* Codec is ready, now add/activate board specific controls */
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-18 04:15:21 +08:00
/* Store a pointer to the codec structure for tty ldisc use */
cx20442_codec = rtd->codec;
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-18 04:15:21 +08:00
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
/* Set up digital mute if not provided by the codec */
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-18 04:15:21 +08:00
if (!codec_dai->driver->ops) {
codec_dai->driver->ops = &ams_delta_dai_ops;
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
} else {
ams_delta_ops.startup = ams_delta_startup;
ams_delta_ops.shutdown = ams_delta_shutdown;
}
/* Add hook switch - can be used to control the codec from userspace
* even if line discipline fails */
ret = snd_soc_card_jack_new(card, "hook_switch", SND_JACK_HEADSET,
&ams_delta_hook_switch, NULL, 0);
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
if (ret)
dev_warn(card->dev,
"Failed to allocate resources for hook switch, "
"will continue without one.\n");
else {
ret = snd_soc_jack_add_gpios(&ams_delta_hook_switch,
ARRAY_SIZE(ams_delta_hook_switch_gpios),
ams_delta_hook_switch_gpios);
if (ret)
dev_warn(card->dev,
"Failed to set up hook switch GPIO line, "
"will continue with hook switch inactive.\n");
}
/* Register optional line discipline for over the modem control */
ret = tty_register_ldisc(N_V253, &cx81801_ops);
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
if (ret) {
dev_warn(card->dev,
"Failed to register line discipline, "
"will continue without any controls.\n");
return 0;
}
/* Set up initial pin constellation */
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 21:53:46 +08:00
snd_soc_dapm_disable_pin(dapm, "Mouthpiece");
snd_soc_dapm_disable_pin(dapm, "Speaker");
snd_soc_dapm_disable_pin(dapm, "AGCIN");
snd_soc_dapm_disable_pin(dapm, "AGCOUT");
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
return 0;
}
static int ams_delta_card_remove(struct snd_soc_card *card)
ASoC: free jack GPIOs before the sound card is freed This is the same change as commit fb6b8e71448a "ASoC: tegra: free jack GPIOs before the sound card is freed", but applied to all other ASoC machine drivers where code inspection indicates the same problem exists. That commit's description is: ========== snd_soc_jack_add_gpios() schedules a work queue item to poll the GPIO to generate an initial jack status report. If sound card initialization fails, that work item needs to be cancelled, so it doesn't run after the card has been freed. Specifically, freeing the card calls snd_jack_dev_free() which calls snd_jack_dev_disconnect() which sets jack->input_dev = NULL, and input_dev is used by snd_jack_report(), which is called from the work queue item. snd_soc_jack_free_gpios() cancels the work item. The Tegra ASoC machine drivers do call this function in the platform driver remove() callback. However, this happens after the sound card is freed, at least when the card is freed due to errors late during snd_soc_instantiate_card(). This leaves a window where the work item can execute after the card is freed. In next-20140522, sound card initialization does fail for unrelated reasons, and hits the problem described above. To solve this, fix the Tegra ASoC machine drivers to clean up the Jack GPIOs during the snd_soc_card's .remove() callback, which is executed before the overall card object is freed. also, guard the cleanup call based on whether we actually setup up the GPIOs in the first place. Ideally, we'd do the cleanup in a struct snd_soc_dai_link .fini/remove function to match where the GPIOs get set up. However, there is no such callback. ========== Note that I have not even compile-tested this in most cases, since most of the drivers rely on specific mach-* support I don't have enabled, and don't support COMPILE_TEST. Testing by the relevant board maintainers would be useful. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-31 02:42:57 +08:00
{
snd_soc_jack_free_gpios(&ams_delta_hook_switch,
ARRAY_SIZE(ams_delta_hook_switch_gpios),
ams_delta_hook_switch_gpios);
return 0;
}
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
/* DAI glue - connects codec <--> CPU */
static struct snd_soc_dai_link ams_delta_dai_link = {
.name = "CX20442",
.stream_name = "CX20442",
.cpu_dai_name = "omap-mcbsp.1",
.codec_dai_name = "cx20442-voice",
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
.init = ams_delta_cx20442_init,
.platform_name = "omap-mcbsp.1",
ASoC: multi-component - ASoC Multi-Component Support This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-18 04:15:21 +08:00
.codec_name = "cx20442-codec",
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
.ops = &ams_delta_ops,
.dai_fmt = SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_NB_NF |
SND_SOC_DAIFMT_CBM_CFM,
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
};
/* Audio card driver */
static struct snd_soc_card ams_delta_audio_card = {
.name = "AMS_DELTA",
.owner = THIS_MODULE,
ASoC: free jack GPIOs before the sound card is freed This is the same change as commit fb6b8e71448a "ASoC: tegra: free jack GPIOs before the sound card is freed", but applied to all other ASoC machine drivers where code inspection indicates the same problem exists. That commit's description is: ========== snd_soc_jack_add_gpios() schedules a work queue item to poll the GPIO to generate an initial jack status report. If sound card initialization fails, that work item needs to be cancelled, so it doesn't run after the card has been freed. Specifically, freeing the card calls snd_jack_dev_free() which calls snd_jack_dev_disconnect() which sets jack->input_dev = NULL, and input_dev is used by snd_jack_report(), which is called from the work queue item. snd_soc_jack_free_gpios() cancels the work item. The Tegra ASoC machine drivers do call this function in the platform driver remove() callback. However, this happens after the sound card is freed, at least when the card is freed due to errors late during snd_soc_instantiate_card(). This leaves a window where the work item can execute after the card is freed. In next-20140522, sound card initialization does fail for unrelated reasons, and hits the problem described above. To solve this, fix the Tegra ASoC machine drivers to clean up the Jack GPIOs during the snd_soc_card's .remove() callback, which is executed before the overall card object is freed. also, guard the cleanup call based on whether we actually setup up the GPIOs in the first place. Ideally, we'd do the cleanup in a struct snd_soc_dai_link .fini/remove function to match where the GPIOs get set up. However, there is no such callback. ========== Note that I have not even compile-tested this in most cases, since most of the drivers rely on specific mach-* support I don't have enabled, and don't support COMPILE_TEST. Testing by the relevant board maintainers would be useful. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-31 02:42:57 +08:00
.remove = ams_delta_card_remove,
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
.dai_link = &ams_delta_dai_link,
.num_links = 1,
.controls = ams_delta_audio_controls,
.num_controls = ARRAY_SIZE(ams_delta_audio_controls),
.dapm_widgets = ams_delta_dapm_widgets,
.num_dapm_widgets = ARRAY_SIZE(ams_delta_dapm_widgets),
.dapm_routes = ams_delta_audio_map,
.num_dapm_routes = ARRAY_SIZE(ams_delta_audio_map),
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
};
/* Module init/exit */
static int ams_delta_probe(struct platform_device *pdev)
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
{
struct snd_soc_card *card = &ams_delta_audio_card;
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
int ret;
card->dev = &pdev->dev;
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
ret = snd_soc_register_card(card);
if (ret) {
dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", ret);
card->dev = NULL;
return ret;
}
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
return 0;
}
static int ams_delta_remove(struct platform_device *pdev)
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
{
struct snd_soc_card *card = platform_get_drvdata(pdev);
if (tty_unregister_ldisc(N_V253) != 0)
dev_warn(&pdev->dev,
"failed to unregister V253 line discipline\n");
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
snd_soc_unregister_card(card);
card->dev = NULL;
return 0;
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
}
#define DRV_NAME "ams-delta-audio"
static struct platform_driver ams_delta_driver = {
.driver = {
.name = DRV_NAME,
},
.probe = ams_delta_probe,
.remove = ams_delta_remove,
};
module_platform_driver(ams_delta_driver);
ASoC: add support for Amstrad E3 (Delta) machine This patch adds machine support for Amstrad E3 (Delta) videophone to ASoC. Created and tested against linux-2.6.31-rc3. Applies and works with linux-omap-2.6 commit 7c5cb7862d32cb344be7831d466535d5255e35ac as well. Depends on: 1) latest version of the CX20442 codec driver that exposes v253_ops structure[1], 2) patch 2/3 form this series: TTY: Add definition of a new line discipline required by Amstrad E3 (Delta) ASoC driver[2]. CPU DAI parameters best matching the codec DAI has been selected out empirically for best user experience. Board specific audio function control (with related DAPM widgets) has been modeled after empirically discovered codec capabilities. Unlike other ASoC machine drivers, this one makes use of a codec provided line discipline that is required for talking to a modem chip that can control the codec behavoiur. As the line discipline operations must call board specific bits as well, the machine driver registers its own line discipline ops, not the codec provided, and then calls those codec provided from inside its own callbacks. If some kind of a glue, like a bus over a tty, exsited that could help in runtime detection of a modem (bus adapter) over a more generic line discipline (bus driver)[3], the line discipline code could be probably designed in a more generic way. In order to work at all, this driver requires a working McBSP1. On OMAP1510 based machines (not sure if other OMAP1 variants as well), where McBSP1 is a DSP public peripheral, that means the kernel must provide basic DSP support, ie. omap_dsp_init(), in order to power up the DSP. This used to be included in linux-omap-2.6 tree up to commit 2512fd29db4eb09e82d182596304c7aaf76d2c5c. Without that, the driver would not work, ie. not shift in/out any bits over the CPU DAI[4]. This limitation is not board, but CPU specific, and may apply to other code that makes use of McBSP1/McBSP3 on affected machines. I provide an extra patch (4/3) as a temporary solution. To work correctly in playback mode, this driver requires my prevoiusly submitted patch that corrects pcm pointer calculation for OMAP1510 based machines[5] (already included in linux-2.6.31-rc3). To support codec controls, this driver requires my previously submitted patch that adds support for modem found on Amstrad Delta[6]. [1] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-July/019780.html [2] http://www.spinics.net/lists/linux-serial/msg01862.html [3] http://www.spinics.net/lists/linux-serial/msg01856.html [4] http://www.spinics.net/lists/linux-omap/msg15114.html [5] http://mailman.alsa-project.org/pipermail/alsa-devel/2009-June/018950.html [6] http://www.spinics.net/lists/linux-omap/msg15432.html Credits to: Mark Underwood - for his initial, omap-alsa based sound driver for this machine, Mark Brown - for his help, patience and excellent subsytem maintainer support. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-29 19:18:53 +08:00
MODULE_AUTHOR("Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>");
MODULE_DESCRIPTION("ALSA SoC driver for Amstrad E3 (Delta) videophone");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:" DRV_NAME);