ALSA: ISA: New Aztech Sound Galaxy driver
This is a new driver for Aztech Sound Galaxy ISA soundcards based on the
AZT1605 and AZT2316 chipsets. It's constructed as two seperate drivers
for either chipset generated from the same source file, with (very)
minimal ifdeffery.
The drivers check the SB DSP version to decide if they are being loaded
for the right chip. AZT1605 returns 2.1 by default and AZT2316 3.1.
This isn't full-proof as the DSP version can actually be set through
software but it's close enough -- as far as I've been able to see, the
DSP version can not be stored in the EEPROM and the cards will therefore
startup with the defaults.
This distinction could (with the same success rate) also be used to
decide which chip we're looking at at runtime meaning a single, merged
driver is also an option but I feel it's actually nicer this way. A
merged driver would have to postpone translating the passed in resource
values to the card configuration until it knew which one it was looking
at and would need to postpone erring out on mpu_irq=10 for azt1605 and
mpu_irq=3 for azt2316.
The drivers have been tested on various cards. For snd-azt1605:
FCC-ID I38-MMSN811: Aztech Sound Galaxy Nova 16 Extra
FCC-ID I38-MMSN822: Aztech Sound Galaxy Pro 16 II
and for snd-azt2316:
FCC-ID I38-MMSN824: Aztech Sound Galaxy Pro 16 AB
FCC-ID I38-MMSN826: Trust Sound Expert DeLuxe Wave 32 (05201)
FCC-ID I38-MMSN830: Trust Sound Expert DeLuxe 16+ (05202)
FCC-ID I38-MMSN837: Packard Bell ISA Soundcard 030069
FCC-ID I38-MMSN846: Trust Sound Expert DeLuxe 16-3D (06300)
FCC-ID I38-MMSN847: Trust Sound Expert DeLuxe Wave 32-3D (06301)
FCC-ID I38-MMSN852: Aztech Sound Galaxy Waverider Pro 32-3D
826 and 846 were also marketed directly by Aztech and then known as:
FCC-ID I38-MMSN826: Aztech Sound Galaxy Waverider 32+
FCC-ID I38-MMSN846: Aztech Sound Galaxy Nova 16 Extra II-3D
Together, these cover the AZT1605 and AT2316A, AZT2316R and AZT2316-S
chipsets. All cards work fully -- full-duplex PCM, MIDI and FM. Full
duplex is a little flaky on some.
I38-MSN811 tends to not work in full-duplex but sometimes does with the
highest success rate being achieved when you first start the capture and
then a playback instead of the other way around (it's a CS4231-KL
codec).
The cards with an AD1845XP codec (my I38-MMSN826 and one of my
I38-MMSN830s) are also somewhat duplex-challenged. Sometimes full-duplex
works, sometimes not and this varies from try to try. This seems likely
to be a timing problem somewhere inside wss-lib.
I38-MMSN826 has an additional "ICS2115 WaveFront" wavetable synth
onboard that isn't supported yet. The wavetable synths on I38-MMSN847
and I38-MMSN852 are wired directly to the standard MPU-401 UART and the
AUX1 input on the codec and work without problem.
CD-ROM audio on the cards is routed to the codec "Line" input, Line-In
to its Aux input, and FM/Wavetable to its AUX1 input. I did not rename
the controls due to the capture source enumeration: I see that
capture-source overrides are hardcoded in wss-lib and this is just too
ugly to live.
Versus the old snd-sgalaxy driver these drivers add support for the
models without a configuration EEPROM (which are common), full-duplex,
MPU-401 UART and OPL3. In the future they might grow support for that
ICS2115 WaveFront synth on 826 and an hwdep interface to write to the
EEPROM on the models that have one.
Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-08-11 19:08:06 +08:00
|
|
|
/*
|
|
|
|
* Aztech AZT1605/AZT2316 Driver
|
|
|
|
* Copyright (C) 2007,2010 Rene Herman
|
|
|
|
*
|
|
|
|
* This program is free software: you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
* the Free Software Foundation, either version 2 of the License, or
|
|
|
|
* (at your option) any later version.
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/isa.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/io.h>
|
|
|
|
#include <asm/processor.h>
|
|
|
|
#include <sound/core.h>
|
|
|
|
#include <sound/initval.h>
|
|
|
|
#include <sound/wss.h>
|
|
|
|
#include <sound/mpu401.h>
|
|
|
|
#include <sound/opl3.h>
|
|
|
|
|
|
|
|
MODULE_DESCRIPTION(CRD_NAME);
|
|
|
|
MODULE_AUTHOR("Rene Herman");
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
|
|
|
|
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
|
|
|
|
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
|
2011-12-15 11:19:36 +08:00
|
|
|
static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE;
|
ALSA: ISA: New Aztech Sound Galaxy driver
This is a new driver for Aztech Sound Galaxy ISA soundcards based on the
AZT1605 and AZT2316 chipsets. It's constructed as two seperate drivers
for either chipset generated from the same source file, with (very)
minimal ifdeffery.
The drivers check the SB DSP version to decide if they are being loaded
for the right chip. AZT1605 returns 2.1 by default and AZT2316 3.1.
This isn't full-proof as the DSP version can actually be set through
software but it's close enough -- as far as I've been able to see, the
DSP version can not be stored in the EEPROM and the cards will therefore
startup with the defaults.
This distinction could (with the same success rate) also be used to
decide which chip we're looking at at runtime meaning a single, merged
driver is also an option but I feel it's actually nicer this way. A
merged driver would have to postpone translating the passed in resource
values to the card configuration until it knew which one it was looking
at and would need to postpone erring out on mpu_irq=10 for azt1605 and
mpu_irq=3 for azt2316.
The drivers have been tested on various cards. For snd-azt1605:
FCC-ID I38-MMSN811: Aztech Sound Galaxy Nova 16 Extra
FCC-ID I38-MMSN822: Aztech Sound Galaxy Pro 16 II
and for snd-azt2316:
FCC-ID I38-MMSN824: Aztech Sound Galaxy Pro 16 AB
FCC-ID I38-MMSN826: Trust Sound Expert DeLuxe Wave 32 (05201)
FCC-ID I38-MMSN830: Trust Sound Expert DeLuxe 16+ (05202)
FCC-ID I38-MMSN837: Packard Bell ISA Soundcard 030069
FCC-ID I38-MMSN846: Trust Sound Expert DeLuxe 16-3D (06300)
FCC-ID I38-MMSN847: Trust Sound Expert DeLuxe Wave 32-3D (06301)
FCC-ID I38-MMSN852: Aztech Sound Galaxy Waverider Pro 32-3D
826 and 846 were also marketed directly by Aztech and then known as:
FCC-ID I38-MMSN826: Aztech Sound Galaxy Waverider 32+
FCC-ID I38-MMSN846: Aztech Sound Galaxy Nova 16 Extra II-3D
Together, these cover the AZT1605 and AT2316A, AZT2316R and AZT2316-S
chipsets. All cards work fully -- full-duplex PCM, MIDI and FM. Full
duplex is a little flaky on some.
I38-MSN811 tends to not work in full-duplex but sometimes does with the
highest success rate being achieved when you first start the capture and
then a playback instead of the other way around (it's a CS4231-KL
codec).
The cards with an AD1845XP codec (my I38-MMSN826 and one of my
I38-MMSN830s) are also somewhat duplex-challenged. Sometimes full-duplex
works, sometimes not and this varies from try to try. This seems likely
to be a timing problem somewhere inside wss-lib.
I38-MMSN826 has an additional "ICS2115 WaveFront" wavetable synth
onboard that isn't supported yet. The wavetable synths on I38-MMSN847
and I38-MMSN852 are wired directly to the standard MPU-401 UART and the
AUX1 input on the codec and work without problem.
CD-ROM audio on the cards is routed to the codec "Line" input, Line-In
to its Aux input, and FM/Wavetable to its AUX1 input. I did not rename
the controls due to the capture source enumeration: I see that
capture-source overrides are hardcoded in wss-lib and this is just too
ugly to live.
Versus the old snd-sgalaxy driver these drivers add support for the
models without a configuration EEPROM (which are common), full-duplex,
MPU-401 UART and OPL3. In the future they might grow support for that
ICS2115 WaveFront synth on 826 and an hwdep interface to write to the
EEPROM on the models that have one.
Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-08-11 19:08:06 +08:00
|
|
|
|
|
|
|
module_param_array(index, int, NULL, 0444);
|
|
|
|
MODULE_PARM_DESC(index, "Index value for " CRD_NAME " soundcard.");
|
|
|
|
module_param_array(id, charp, NULL, 0444);
|
|
|
|
MODULE_PARM_DESC(id, "ID string for " CRD_NAME " soundcard.");
|
|
|
|
module_param_array(enable, bool, NULL, 0444);
|
|
|
|
MODULE_PARM_DESC(enable, "Enable " CRD_NAME " soundcard.");
|
|
|
|
|
|
|
|
static long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT;
|
|
|
|
static long wss_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT;
|
|
|
|
static long mpu_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT;
|
|
|
|
static long fm_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT;
|
|
|
|
static int irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ;
|
|
|
|
static int mpu_irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ;
|
|
|
|
static int dma1[SNDRV_CARDS] = SNDRV_DEFAULT_DMA;
|
|
|
|
static int dma2[SNDRV_CARDS] = SNDRV_DEFAULT_DMA;
|
|
|
|
|
|
|
|
module_param_array(port, long, NULL, 0444);
|
|
|
|
MODULE_PARM_DESC(port, "Port # for " CRD_NAME " driver.");
|
|
|
|
module_param_array(wss_port, long, NULL, 0444);
|
|
|
|
MODULE_PARM_DESC(wss_port, "WSS port # for " CRD_NAME " driver.");
|
|
|
|
module_param_array(mpu_port, long, NULL, 0444);
|
|
|
|
MODULE_PARM_DESC(mpu_port, "MPU-401 port # for " CRD_NAME " driver.");
|
|
|
|
module_param_array(fm_port, long, NULL, 0444);
|
|
|
|
MODULE_PARM_DESC(fm_port, "FM port # for " CRD_NAME " driver.");
|
|
|
|
module_param_array(irq, int, NULL, 0444);
|
|
|
|
MODULE_PARM_DESC(irq, "IRQ # for " CRD_NAME " driver.");
|
|
|
|
module_param_array(mpu_irq, int, NULL, 0444);
|
|
|
|
MODULE_PARM_DESC(mpu_irq, "MPU-401 IRQ # for " CRD_NAME " driver.");
|
|
|
|
module_param_array(dma1, int, NULL, 0444);
|
|
|
|
MODULE_PARM_DESC(dma1, "Playback DMA # for " CRD_NAME " driver.");
|
|
|
|
module_param_array(dma2, int, NULL, 0444);
|
|
|
|
MODULE_PARM_DESC(dma2, "Capture DMA # for " CRD_NAME " driver.");
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Generic SB DSP support routines
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define DSP_PORT_RESET 0x6
|
|
|
|
#define DSP_PORT_READ 0xa
|
|
|
|
#define DSP_PORT_COMMAND 0xc
|
|
|
|
#define DSP_PORT_STATUS 0xc
|
|
|
|
#define DSP_PORT_DATA_AVAIL 0xe
|
|
|
|
|
|
|
|
#define DSP_SIGNATURE 0xaa
|
|
|
|
|
|
|
|
#define DSP_COMMAND_GET_VERSION 0xe1
|
|
|
|
|
|
|
|
static int __devinit dsp_get_byte(void __iomem *port, u8 *val)
|
|
|
|
{
|
|
|
|
int loops = 1000;
|
|
|
|
|
|
|
|
while (!(ioread8(port + DSP_PORT_DATA_AVAIL) & 0x80)) {
|
|
|
|
if (!loops--)
|
|
|
|
return -EIO;
|
|
|
|
cpu_relax();
|
|
|
|
}
|
|
|
|
*val = ioread8(port + DSP_PORT_READ);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __devinit dsp_reset(void __iomem *port)
|
|
|
|
{
|
|
|
|
u8 val;
|
|
|
|
|
|
|
|
iowrite8(1, port + DSP_PORT_RESET);
|
|
|
|
udelay(10);
|
|
|
|
iowrite8(0, port + DSP_PORT_RESET);
|
|
|
|
|
|
|
|
if (dsp_get_byte(port, &val) < 0 || val != DSP_SIGNATURE)
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __devinit dsp_command(void __iomem *port, u8 cmd)
|
|
|
|
{
|
|
|
|
int loops = 1000;
|
|
|
|
|
|
|
|
while (ioread8(port + DSP_PORT_STATUS) & 0x80) {
|
|
|
|
if (!loops--)
|
|
|
|
return -EIO;
|
|
|
|
cpu_relax();
|
|
|
|
}
|
|
|
|
iowrite8(cmd, port + DSP_PORT_COMMAND);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __devinit dsp_get_version(void __iomem *port, u8 *major, u8 *minor)
|
|
|
|
{
|
|
|
|
int err;
|
|
|
|
|
|
|
|
err = dsp_command(port, DSP_COMMAND_GET_VERSION);
|
|
|
|
if (err < 0)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
err = dsp_get_byte(port, major);
|
|
|
|
if (err < 0)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
err = dsp_get_byte(port, minor);
|
|
|
|
if (err < 0)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Generic WSS support routines
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define WSS_CONFIG_DMA_0 (1 << 0)
|
|
|
|
#define WSS_CONFIG_DMA_1 (2 << 0)
|
|
|
|
#define WSS_CONFIG_DMA_3 (3 << 0)
|
|
|
|
#define WSS_CONFIG_DUPLEX (1 << 2)
|
|
|
|
#define WSS_CONFIG_IRQ_7 (1 << 3)
|
|
|
|
#define WSS_CONFIG_IRQ_9 (2 << 3)
|
|
|
|
#define WSS_CONFIG_IRQ_10 (3 << 3)
|
|
|
|
#define WSS_CONFIG_IRQ_11 (4 << 3)
|
|
|
|
|
|
|
|
#define WSS_PORT_CONFIG 0
|
|
|
|
#define WSS_PORT_SIGNATURE 3
|
|
|
|
|
|
|
|
#define WSS_SIGNATURE 4
|
|
|
|
|
|
|
|
static int __devinit wss_detect(void __iomem *wss_port)
|
|
|
|
{
|
|
|
|
if ((ioread8(wss_port + WSS_PORT_SIGNATURE) & 0x3f) != WSS_SIGNATURE)
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void wss_set_config(void __iomem *wss_port, u8 wss_config)
|
|
|
|
{
|
|
|
|
iowrite8(wss_config, wss_port + WSS_PORT_CONFIG);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Aztech Sound Galaxy specifics
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define GALAXY_PORT_CONFIG 1024
|
|
|
|
#define CONFIG_PORT_SET 4
|
|
|
|
|
|
|
|
#define DSP_COMMAND_GALAXY_8 8
|
|
|
|
#define GALAXY_COMMAND_GET_TYPE 5
|
|
|
|
|
|
|
|
#define DSP_COMMAND_GALAXY_9 9
|
|
|
|
#define GALAXY_COMMAND_WSSMODE 0
|
|
|
|
#define GALAXY_COMMAND_SB8MODE 1
|
|
|
|
|
|
|
|
#define GALAXY_MODE_WSS GALAXY_COMMAND_WSSMODE
|
|
|
|
#define GALAXY_MODE_SB8 GALAXY_COMMAND_SB8MODE
|
|
|
|
|
|
|
|
struct snd_galaxy {
|
|
|
|
void __iomem *port;
|
|
|
|
void __iomem *config_port;
|
|
|
|
void __iomem *wss_port;
|
|
|
|
u32 config;
|
|
|
|
struct resource *res_port;
|
|
|
|
struct resource *res_config_port;
|
|
|
|
struct resource *res_wss_port;
|
|
|
|
};
|
|
|
|
|
|
|
|
static u32 config[SNDRV_CARDS];
|
|
|
|
static u8 wss_config[SNDRV_CARDS];
|
|
|
|
|
|
|
|
static int __devinit snd_galaxy_match(struct device *dev, unsigned int n)
|
|
|
|
{
|
|
|
|
if (!enable[n])
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
switch (port[n]) {
|
|
|
|
case SNDRV_AUTO_PORT:
|
|
|
|
dev_err(dev, "please specify port\n");
|
|
|
|
return 0;
|
|
|
|
case 0x220:
|
|
|
|
config[n] |= GALAXY_CONFIG_SBA_220;
|
|
|
|
break;
|
|
|
|
case 0x240:
|
|
|
|
config[n] |= GALAXY_CONFIG_SBA_240;
|
|
|
|
break;
|
|
|
|
case 0x260:
|
|
|
|
config[n] |= GALAXY_CONFIG_SBA_260;
|
|
|
|
break;
|
|
|
|
case 0x280:
|
|
|
|
config[n] |= GALAXY_CONFIG_SBA_280;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
dev_err(dev, "invalid port %#lx\n", port[n]);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (wss_port[n]) {
|
|
|
|
case SNDRV_AUTO_PORT:
|
|
|
|
dev_err(dev, "please specify wss_port\n");
|
|
|
|
return 0;
|
|
|
|
case 0x530:
|
|
|
|
config[n] |= GALAXY_CONFIG_WSS_ENABLE | GALAXY_CONFIG_WSSA_530;
|
|
|
|
break;
|
|
|
|
case 0x604:
|
|
|
|
config[n] |= GALAXY_CONFIG_WSS_ENABLE | GALAXY_CONFIG_WSSA_604;
|
|
|
|
break;
|
|
|
|
case 0xe80:
|
|
|
|
config[n] |= GALAXY_CONFIG_WSS_ENABLE | GALAXY_CONFIG_WSSA_E80;
|
|
|
|
break;
|
|
|
|
case 0xf40:
|
|
|
|
config[n] |= GALAXY_CONFIG_WSS_ENABLE | GALAXY_CONFIG_WSSA_F40;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
dev_err(dev, "invalid WSS port %#lx\n", wss_port[n]);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (irq[n]) {
|
|
|
|
case SNDRV_AUTO_IRQ:
|
|
|
|
dev_err(dev, "please specify irq\n");
|
|
|
|
return 0;
|
|
|
|
case 7:
|
|
|
|
wss_config[n] |= WSS_CONFIG_IRQ_7;
|
|
|
|
break;
|
|
|
|
case 2:
|
|
|
|
irq[n] = 9;
|
|
|
|
case 9:
|
|
|
|
wss_config[n] |= WSS_CONFIG_IRQ_9;
|
|
|
|
break;
|
|
|
|
case 10:
|
|
|
|
wss_config[n] |= WSS_CONFIG_IRQ_10;
|
|
|
|
break;
|
|
|
|
case 11:
|
|
|
|
wss_config[n] |= WSS_CONFIG_IRQ_11;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
dev_err(dev, "invalid IRQ %d\n", irq[n]);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (dma1[n]) {
|
|
|
|
case SNDRV_AUTO_DMA:
|
|
|
|
dev_err(dev, "please specify dma1\n");
|
|
|
|
return 0;
|
|
|
|
case 0:
|
|
|
|
wss_config[n] |= WSS_CONFIG_DMA_0;
|
|
|
|
break;
|
|
|
|
case 1:
|
|
|
|
wss_config[n] |= WSS_CONFIG_DMA_1;
|
|
|
|
break;
|
|
|
|
case 3:
|
|
|
|
wss_config[n] |= WSS_CONFIG_DMA_3;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
dev_err(dev, "invalid playback DMA %d\n", dma1[n]);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (dma2[n] == SNDRV_AUTO_DMA || dma2[n] == dma1[n]) {
|
|
|
|
dma2[n] = -1;
|
|
|
|
goto mpu;
|
|
|
|
}
|
|
|
|
|
|
|
|
wss_config[n] |= WSS_CONFIG_DUPLEX;
|
|
|
|
switch (dma2[n]) {
|
|
|
|
case 0:
|
|
|
|
break;
|
|
|
|
case 1:
|
|
|
|
if (dma1[n] == 0)
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
dev_err(dev, "invalid capture DMA %d\n", dma2[n]);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
mpu:
|
|
|
|
switch (mpu_port[n]) {
|
|
|
|
case SNDRV_AUTO_PORT:
|
|
|
|
dev_warn(dev, "mpu_port not specified; not using MPU-401\n");
|
|
|
|
mpu_port[n] = -1;
|
|
|
|
goto fm;
|
|
|
|
case 0x300:
|
|
|
|
config[n] |= GALAXY_CONFIG_MPU_ENABLE | GALAXY_CONFIG_MPUA_300;
|
|
|
|
break;
|
|
|
|
case 0x330:
|
|
|
|
config[n] |= GALAXY_CONFIG_MPU_ENABLE | GALAXY_CONFIG_MPUA_330;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
dev_err(dev, "invalid MPU port %#lx\n", mpu_port[n]);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
switch (mpu_irq[n]) {
|
|
|
|
case SNDRV_AUTO_IRQ:
|
|
|
|
dev_warn(dev, "mpu_irq not specified: using polling mode\n");
|
|
|
|
mpu_irq[n] = -1;
|
|
|
|
break;
|
|
|
|
case 2:
|
|
|
|
mpu_irq[n] = 9;
|
|
|
|
case 9:
|
|
|
|
config[n] |= GALAXY_CONFIG_MPUIRQ_2;
|
|
|
|
break;
|
|
|
|
#ifdef AZT1605
|
|
|
|
case 3:
|
|
|
|
config[n] |= GALAXY_CONFIG_MPUIRQ_3;
|
|
|
|
break;
|
|
|
|
#endif
|
|
|
|
case 5:
|
|
|
|
config[n] |= GALAXY_CONFIG_MPUIRQ_5;
|
|
|
|
break;
|
|
|
|
case 7:
|
|
|
|
config[n] |= GALAXY_CONFIG_MPUIRQ_7;
|
|
|
|
break;
|
|
|
|
#ifdef AZT2316
|
|
|
|
case 10:
|
|
|
|
config[n] |= GALAXY_CONFIG_MPUIRQ_10;
|
|
|
|
break;
|
|
|
|
#endif
|
|
|
|
default:
|
|
|
|
dev_err(dev, "invalid MPU IRQ %d\n", mpu_irq[n]);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (mpu_irq[n] == irq[n]) {
|
|
|
|
dev_err(dev, "cannot share IRQ between WSS and MPU-401\n");
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
fm:
|
|
|
|
switch (fm_port[n]) {
|
|
|
|
case SNDRV_AUTO_PORT:
|
|
|
|
dev_warn(dev, "fm_port not specified: not using OPL3\n");
|
|
|
|
fm_port[n] = -1;
|
|
|
|
break;
|
|
|
|
case 0x388:
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
dev_err(dev, "illegal FM port %#lx\n", fm_port[n]);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
config[n] |= GALAXY_CONFIG_GAME_ENABLE;
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __devinit galaxy_init(struct snd_galaxy *galaxy, u8 *type)
|
|
|
|
{
|
|
|
|
u8 major;
|
|
|
|
u8 minor;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
err = dsp_reset(galaxy->port);
|
|
|
|
if (err < 0)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
err = dsp_get_version(galaxy->port, &major, &minor);
|
|
|
|
if (err < 0)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
if (major != GALAXY_DSP_MAJOR || minor != GALAXY_DSP_MINOR)
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
err = dsp_command(galaxy->port, DSP_COMMAND_GALAXY_8);
|
|
|
|
if (err < 0)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
err = dsp_command(galaxy->port, GALAXY_COMMAND_GET_TYPE);
|
|
|
|
if (err < 0)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
err = dsp_get_byte(galaxy->port, type);
|
|
|
|
if (err < 0)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __devinit galaxy_set_mode(struct snd_galaxy *galaxy, u8 mode)
|
|
|
|
{
|
|
|
|
int err;
|
|
|
|
|
|
|
|
err = dsp_command(galaxy->port, DSP_COMMAND_GALAXY_9);
|
|
|
|
if (err < 0)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
err = dsp_command(galaxy->port, mode);
|
|
|
|
if (err < 0)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
#ifdef AZT1605
|
|
|
|
/*
|
|
|
|
* Needed for MPU IRQ on AZT1605, but AZT2316 loses WSS again
|
|
|
|
*/
|
|
|
|
err = dsp_reset(galaxy->port);
|
|
|
|
if (err < 0)
|
|
|
|
return err;
|
|
|
|
#endif
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void galaxy_set_config(struct snd_galaxy *galaxy, u32 config)
|
|
|
|
{
|
|
|
|
u8 tmp = ioread8(galaxy->config_port + CONFIG_PORT_SET);
|
|
|
|
int i;
|
|
|
|
|
|
|
|
iowrite8(tmp | 0x80, galaxy->config_port + CONFIG_PORT_SET);
|
|
|
|
for (i = 0; i < GALAXY_CONFIG_SIZE; i++) {
|
|
|
|
iowrite8(config, galaxy->config_port + i);
|
|
|
|
config >>= 8;
|
|
|
|
}
|
|
|
|
iowrite8(tmp & 0x7f, galaxy->config_port + CONFIG_PORT_SET);
|
|
|
|
msleep(10);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __devinit galaxy_config(struct snd_galaxy *galaxy, u32 config)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = GALAXY_CONFIG_SIZE; i; i--) {
|
|
|
|
u8 tmp = ioread8(galaxy->config_port + i - 1);
|
|
|
|
galaxy->config = (galaxy->config << 8) | tmp;
|
|
|
|
}
|
|
|
|
config |= galaxy->config & GALAXY_CONFIG_MASK;
|
|
|
|
galaxy_set_config(galaxy, config);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __devinit galaxy_wss_config(struct snd_galaxy *galaxy, u8 wss_config)
|
|
|
|
{
|
|
|
|
int err;
|
|
|
|
|
|
|
|
err = wss_detect(galaxy->wss_port);
|
|
|
|
if (err < 0)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
wss_set_config(galaxy->wss_port, wss_config);
|
|
|
|
|
|
|
|
err = galaxy_set_mode(galaxy, GALAXY_MODE_WSS);
|
|
|
|
if (err < 0)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void snd_galaxy_free(struct snd_card *card)
|
|
|
|
{
|
|
|
|
struct snd_galaxy *galaxy = card->private_data;
|
|
|
|
|
|
|
|
if (galaxy->wss_port) {
|
|
|
|
wss_set_config(galaxy->wss_port, 0);
|
|
|
|
ioport_unmap(galaxy->wss_port);
|
|
|
|
release_and_free_resource(galaxy->res_wss_port);
|
|
|
|
}
|
|
|
|
if (galaxy->config_port) {
|
|
|
|
galaxy_set_config(galaxy, galaxy->config);
|
|
|
|
ioport_unmap(galaxy->config_port);
|
|
|
|
release_and_free_resource(galaxy->res_config_port);
|
|
|
|
}
|
|
|
|
if (galaxy->port) {
|
|
|
|
ioport_unmap(galaxy->port);
|
|
|
|
release_and_free_resource(galaxy->res_port);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __devinit snd_galaxy_probe(struct device *dev, unsigned int n)
|
|
|
|
{
|
|
|
|
struct snd_galaxy *galaxy;
|
|
|
|
struct snd_wss *chip;
|
|
|
|
struct snd_card *card;
|
|
|
|
u8 type;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
err = snd_card_create(index[n], id[n], THIS_MODULE, sizeof *galaxy,
|
|
|
|
&card);
|
|
|
|
if (err < 0)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
snd_card_set_dev(card, dev);
|
|
|
|
|
|
|
|
card->private_free = snd_galaxy_free;
|
|
|
|
galaxy = card->private_data;
|
|
|
|
|
|
|
|
galaxy->res_port = request_region(port[n], 16, DRV_NAME);
|
|
|
|
if (!galaxy->res_port) {
|
|
|
|
dev_err(dev, "could not grab ports %#lx-%#lx\n", port[n],
|
|
|
|
port[n] + 15);
|
|
|
|
err = -EBUSY;
|
|
|
|
goto error;
|
|
|
|
}
|
|
|
|
galaxy->port = ioport_map(port[n], 16);
|
|
|
|
|
|
|
|
err = galaxy_init(galaxy, &type);
|
|
|
|
if (err < 0) {
|
|
|
|
dev_err(dev, "did not find a Sound Galaxy at %#lx\n", port[n]);
|
|
|
|
goto error;
|
|
|
|
}
|
|
|
|
dev_info(dev, "Sound Galaxy (type %d) found at %#lx\n", type, port[n]);
|
|
|
|
|
|
|
|
galaxy->res_config_port = request_region(port[n] + GALAXY_PORT_CONFIG,
|
|
|
|
16, DRV_NAME);
|
|
|
|
if (!galaxy->res_config_port) {
|
|
|
|
dev_err(dev, "could not grab ports %#lx-%#lx\n",
|
|
|
|
port[n] + GALAXY_PORT_CONFIG,
|
|
|
|
port[n] + GALAXY_PORT_CONFIG + 15);
|
|
|
|
err = -EBUSY;
|
|
|
|
goto error;
|
|
|
|
}
|
|
|
|
galaxy->config_port = ioport_map(port[n] + GALAXY_PORT_CONFIG, 16);
|
|
|
|
|
|
|
|
galaxy_config(galaxy, config[n]);
|
|
|
|
|
|
|
|
galaxy->res_wss_port = request_region(wss_port[n], 4, DRV_NAME);
|
|
|
|
if (!galaxy->res_wss_port) {
|
|
|
|
dev_err(dev, "could not grab ports %#lx-%#lx\n", wss_port[n],
|
|
|
|
wss_port[n] + 3);
|
|
|
|
err = -EBUSY;
|
|
|
|
goto error;
|
|
|
|
}
|
|
|
|
galaxy->wss_port = ioport_map(wss_port[n], 4);
|
|
|
|
|
|
|
|
err = galaxy_wss_config(galaxy, wss_config[n]);
|
|
|
|
if (err < 0) {
|
|
|
|
dev_err(dev, "could not configure WSS\n");
|
|
|
|
goto error;
|
|
|
|
}
|
|
|
|
|
|
|
|
strcpy(card->driver, DRV_NAME);
|
|
|
|
strcpy(card->shortname, DRV_NAME);
|
|
|
|
sprintf(card->longname, "%s at %#lx/%#lx, irq %d, dma %d/%d",
|
|
|
|
card->shortname, port[n], wss_port[n], irq[n], dma1[n],
|
|
|
|
dma2[n]);
|
|
|
|
|
|
|
|
err = snd_wss_create(card, wss_port[n] + 4, -1, irq[n], dma1[n],
|
|
|
|
dma2[n], WSS_HW_DETECT, 0, &chip);
|
|
|
|
if (err < 0)
|
|
|
|
goto error;
|
|
|
|
|
|
|
|
err = snd_wss_pcm(chip, 0, NULL);
|
|
|
|
if (err < 0)
|
|
|
|
goto error;
|
|
|
|
|
|
|
|
err = snd_wss_mixer(chip);
|
|
|
|
if (err < 0)
|
|
|
|
goto error;
|
|
|
|
|
|
|
|
err = snd_wss_timer(chip, 0, NULL);
|
|
|
|
if (err < 0)
|
|
|
|
goto error;
|
|
|
|
|
|
|
|
if (mpu_port[n] >= 0) {
|
|
|
|
err = snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401,
|
ALSA: mpu401: clean up interrupt specification
The semantics of snd_mpu401_uart_new()'s interrupt parameters are
somewhat counterintuitive: To prevent the function from allocating its
own interrupt, either the irq number must be invalid, or the irq_flags
parameter must be zero. At the same time, the irq parameter being
invalid specifies that the mpu401 code has to work without an interrupt
allocated by the caller. This implies that, if there is an interrupt
and it is allocated by the caller, the irq parameter must be set to
a valid-looking number which then isn't actually used.
With the removal of IRQF_DISABLED, zero becomes a valid irq_flags value,
which forces us to handle the parameters differently.
This patch introduces a new flag MPU401_INFO_IRQ_HOOK for when the
device interrupt is handled by the caller, and makes the allocation of
the interrupt to depend only on the irq parameter. As suggested by
Takashi, the irq_flags parameter was dropped because, when used, it had
the constant value IRQF_DISABLED.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-13 17:24:41 +08:00
|
|
|
mpu_port[n], 0, mpu_irq[n], NULL);
|
ALSA: ISA: New Aztech Sound Galaxy driver
This is a new driver for Aztech Sound Galaxy ISA soundcards based on the
AZT1605 and AZT2316 chipsets. It's constructed as two seperate drivers
for either chipset generated from the same source file, with (very)
minimal ifdeffery.
The drivers check the SB DSP version to decide if they are being loaded
for the right chip. AZT1605 returns 2.1 by default and AZT2316 3.1.
This isn't full-proof as the DSP version can actually be set through
software but it's close enough -- as far as I've been able to see, the
DSP version can not be stored in the EEPROM and the cards will therefore
startup with the defaults.
This distinction could (with the same success rate) also be used to
decide which chip we're looking at at runtime meaning a single, merged
driver is also an option but I feel it's actually nicer this way. A
merged driver would have to postpone translating the passed in resource
values to the card configuration until it knew which one it was looking
at and would need to postpone erring out on mpu_irq=10 for azt1605 and
mpu_irq=3 for azt2316.
The drivers have been tested on various cards. For snd-azt1605:
FCC-ID I38-MMSN811: Aztech Sound Galaxy Nova 16 Extra
FCC-ID I38-MMSN822: Aztech Sound Galaxy Pro 16 II
and for snd-azt2316:
FCC-ID I38-MMSN824: Aztech Sound Galaxy Pro 16 AB
FCC-ID I38-MMSN826: Trust Sound Expert DeLuxe Wave 32 (05201)
FCC-ID I38-MMSN830: Trust Sound Expert DeLuxe 16+ (05202)
FCC-ID I38-MMSN837: Packard Bell ISA Soundcard 030069
FCC-ID I38-MMSN846: Trust Sound Expert DeLuxe 16-3D (06300)
FCC-ID I38-MMSN847: Trust Sound Expert DeLuxe Wave 32-3D (06301)
FCC-ID I38-MMSN852: Aztech Sound Galaxy Waverider Pro 32-3D
826 and 846 were also marketed directly by Aztech and then known as:
FCC-ID I38-MMSN826: Aztech Sound Galaxy Waverider 32+
FCC-ID I38-MMSN846: Aztech Sound Galaxy Nova 16 Extra II-3D
Together, these cover the AZT1605 and AT2316A, AZT2316R and AZT2316-S
chipsets. All cards work fully -- full-duplex PCM, MIDI and FM. Full
duplex is a little flaky on some.
I38-MSN811 tends to not work in full-duplex but sometimes does with the
highest success rate being achieved when you first start the capture and
then a playback instead of the other way around (it's a CS4231-KL
codec).
The cards with an AD1845XP codec (my I38-MMSN826 and one of my
I38-MMSN830s) are also somewhat duplex-challenged. Sometimes full-duplex
works, sometimes not and this varies from try to try. This seems likely
to be a timing problem somewhere inside wss-lib.
I38-MMSN826 has an additional "ICS2115 WaveFront" wavetable synth
onboard that isn't supported yet. The wavetable synths on I38-MMSN847
and I38-MMSN852 are wired directly to the standard MPU-401 UART and the
AUX1 input on the codec and work without problem.
CD-ROM audio on the cards is routed to the codec "Line" input, Line-In
to its Aux input, and FM/Wavetable to its AUX1 input. I did not rename
the controls due to the capture source enumeration: I see that
capture-source overrides are hardcoded in wss-lib and this is just too
ugly to live.
Versus the old snd-sgalaxy driver these drivers add support for the
models without a configuration EEPROM (which are common), full-duplex,
MPU-401 UART and OPL3. In the future they might grow support for that
ICS2115 WaveFront synth on 826 and an hwdep interface to write to the
EEPROM on the models that have one.
Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-08-11 19:08:06 +08:00
|
|
|
if (err < 0)
|
|
|
|
goto error;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (fm_port[n] >= 0) {
|
|
|
|
struct snd_opl3 *opl3;
|
|
|
|
|
|
|
|
err = snd_opl3_create(card, fm_port[n], fm_port[n] + 2,
|
|
|
|
OPL3_HW_AUTO, 0, &opl3);
|
|
|
|
if (err < 0) {
|
|
|
|
dev_err(dev, "no OPL device at %#lx\n", fm_port[n]);
|
|
|
|
goto error;
|
|
|
|
}
|
|
|
|
err = snd_opl3_timer_new(opl3, 1, 2);
|
|
|
|
if (err < 0)
|
|
|
|
goto error;
|
|
|
|
|
|
|
|
err = snd_opl3_hwdep_new(opl3, 0, 1, NULL);
|
|
|
|
if (err < 0)
|
|
|
|
goto error;
|
|
|
|
}
|
|
|
|
|
|
|
|
err = snd_card_register(card);
|
|
|
|
if (err < 0)
|
|
|
|
goto error;
|
|
|
|
|
|
|
|
dev_set_drvdata(dev, card);
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
error:
|
|
|
|
snd_card_free(card);
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __devexit snd_galaxy_remove(struct device *dev, unsigned int n)
|
|
|
|
{
|
|
|
|
snd_card_free(dev_get_drvdata(dev));
|
|
|
|
dev_set_drvdata(dev, NULL);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct isa_driver snd_galaxy_driver = {
|
|
|
|
.match = snd_galaxy_match,
|
|
|
|
.probe = snd_galaxy_probe,
|
|
|
|
.remove = __devexit_p(snd_galaxy_remove),
|
|
|
|
|
|
|
|
.driver = {
|
|
|
|
.name = DEV_NAME
|
|
|
|
}
|
|
|
|
};
|
|
|
|
|
|
|
|
static int __init alsa_card_galaxy_init(void)
|
|
|
|
{
|
|
|
|
return isa_register_driver(&snd_galaxy_driver, SNDRV_CARDS);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __exit alsa_card_galaxy_exit(void)
|
|
|
|
{
|
|
|
|
isa_unregister_driver(&snd_galaxy_driver);
|
|
|
|
}
|
|
|
|
|
|
|
|
module_init(alsa_card_galaxy_init);
|
|
|
|
module_exit(alsa_card_galaxy_exit);
|