OpenCloudOS-Kernel/drivers/acpi/irq.c

351 lines
9.8 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* ACPI GSI IRQ layer
*
* Copyright (C) 2015 ARM Ltd.
* Author: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
*/
#include <linux/acpi.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/of.h>
enum acpi_irq_model_id acpi_irq_model;
static struct fwnode_handle *(*acpi_get_gsi_domain_id)(u32 gsi);
static u32 (*acpi_gsi_to_irq_fallback)(u32 gsi);
/**
* acpi_gsi_to_irq() - Retrieve the linux irq number for a given GSI
* @gsi: GSI IRQ number to map
* @irq: pointer where linux IRQ number is stored
*
* irq location updated with irq value [>0 on success, 0 on failure]
*
* Returns: 0 on success
* -EINVAL on failure
*/
int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
{
struct irq_domain *d;
d = irq_find_matching_fwnode(acpi_get_gsi_domain_id(gsi),
DOMAIN_BUS_ANY);
*irq = irq_find_mapping(d, gsi);
/*
* *irq == 0 means no mapping, that should be reported as a
* failure, unless there is an arch-specific fallback handler.
*/
if (!*irq && acpi_gsi_to_irq_fallback)
*irq = acpi_gsi_to_irq_fallback(gsi);
return (*irq > 0) ? 0 : -EINVAL;
}
EXPORT_SYMBOL_GPL(acpi_gsi_to_irq);
/**
* acpi_register_gsi() - Map a GSI to a linux IRQ number
* @dev: device for which IRQ has to be mapped
* @gsi: GSI IRQ number
* @trigger: trigger type of the GSI number to be mapped
* @polarity: polarity of the GSI to be mapped
*
* Returns: a valid linux IRQ number on success
* -EINVAL on failure
*/
int acpi_register_gsi(struct device *dev, u32 gsi, int trigger,
int polarity)
{
struct irq_fwspec fwspec;
fwspec.fwnode = acpi_get_gsi_domain_id(gsi);
if (WARN_ON(!fwspec.fwnode)) {
pr_warn("GSI: No registered irqchip, giving up\n");
return -EINVAL;
}
fwspec.param[0] = gsi;
fwspec.param[1] = acpi_dev_get_irq_type(trigger, polarity);
fwspec.param_count = 2;
return irq_create_fwspec_mapping(&fwspec);
}
EXPORT_SYMBOL_GPL(acpi_register_gsi);
/**
* acpi_unregister_gsi() - Free a GSI<->linux IRQ number mapping
* @gsi: GSI IRQ number
*/
void acpi_unregister_gsi(u32 gsi)
{
struct irq_domain *d;
int irq;
if (WARN_ON(acpi_irq_model == ACPI_IRQ_MODEL_GIC && gsi < 16))
return;
d = irq_find_matching_fwnode(acpi_get_gsi_domain_id(gsi),
DOMAIN_BUS_ANY);
irq = irq_find_mapping(d, gsi);
irq_dispose_mapping(irq);
}
EXPORT_SYMBOL_GPL(acpi_unregister_gsi);
/**
* acpi_get_irq_source_fwhandle() - Retrieve fwhandle from IRQ resource source.
* @source: acpi_resource_source to use for the lookup.
*
* Description:
* Retrieve the fwhandle of the device referenced by the given IRQ resource
* source.
*
* Return:
* The referenced device fwhandle or NULL on failure
*/
static struct fwnode_handle *
acpi_get_irq_source_fwhandle(const struct acpi_resource_source *source,
u32 gsi)
{
struct fwnode_handle *result;
struct acpi_device *device;
acpi_handle handle;
acpi_status status;
if (!source->string_length)
return acpi_get_gsi_domain_id(gsi);
status = acpi_get_handle(NULL, source->string_ptr, &handle);
if (WARN_ON(ACPI_FAILURE(status)))
return NULL;
device = acpi_get_acpi_dev(handle);
if (WARN_ON(!device))
return NULL;
result = &device->fwnode;
acpi_put_acpi_dev(device);
return result;
}
/*
* Context for the resource walk used to lookup IRQ resources.
* Contains a return code, the lookup index, and references to the flags
* and fwspec where the result is returned.
*/
struct acpi_irq_parse_one_ctx {
int rc;
unsigned int index;
unsigned long *res_flags;
struct irq_fwspec *fwspec;
};
/**
* acpi_irq_parse_one_match - Handle a matching IRQ resource.
* @fwnode: matching fwnode
* @hwirq: hardware IRQ number
* @triggering: triggering attributes of hwirq
* @polarity: polarity attributes of hwirq
* @polarity: polarity attributes of hwirq
* @shareable: shareable attributes of hwirq
* @wake_capable: wake capable attribute of hwirq
* @ctx: acpi_irq_parse_one_ctx updated by this function
*
* Description:
* Handle a matching IRQ resource by populating the given ctx with
* the information passed.
*/
static inline void acpi_irq_parse_one_match(struct fwnode_handle *fwnode,
u32 hwirq, u8 triggering,
u8 polarity, u8 shareable,
u8 wake_capable,
struct acpi_irq_parse_one_ctx *ctx)
{
if (!fwnode)
return;
ctx->rc = 0;
*ctx->res_flags = acpi_dev_irq_flags(triggering, polarity, shareable, wake_capable);
ctx->fwspec->fwnode = fwnode;
ctx->fwspec->param[0] = hwirq;
ctx->fwspec->param[1] = acpi_dev_get_irq_type(triggering, polarity);
ctx->fwspec->param_count = 2;
}
/**
* acpi_irq_parse_one_cb - Handle the given resource.
* @ares: resource to handle
* @context: context for the walk
*
* Description:
* This is called by acpi_walk_resources passing each resource returned by
* the _CRS method. We only inspect IRQ resources. Since IRQ resources
* might contain multiple interrupts we check if the index is within this
* one's interrupt array, otherwise we subtract the current resource IRQ
* count from the lookup index to prepare for the next resource.
* Once a match is found we call acpi_irq_parse_one_match to populate
* the result and end the walk by returning AE_CTRL_TERMINATE.
*
* Return:
* AE_OK if the walk should continue, AE_CTRL_TERMINATE if a matching
* IRQ resource was found.
*/
static acpi_status acpi_irq_parse_one_cb(struct acpi_resource *ares,
void *context)
{
struct acpi_irq_parse_one_ctx *ctx = context;
struct acpi_resource_irq *irq;
struct acpi_resource_extended_irq *eirq;
struct fwnode_handle *fwnode;
switch (ares->type) {
case ACPI_RESOURCE_TYPE_IRQ:
irq = &ares->data.irq;
if (ctx->index >= irq->interrupt_count) {
ctx->index -= irq->interrupt_count;
return AE_OK;
}
fwnode = acpi_get_gsi_domain_id(irq->interrupts[ctx->index]);
acpi_irq_parse_one_match(fwnode, irq->interrupts[ctx->index],
irq->triggering, irq->polarity,
irq->shareable, irq->wake_capable, ctx);
return AE_CTRL_TERMINATE;
case ACPI_RESOURCE_TYPE_EXTENDED_IRQ:
eirq = &ares->data.extended_irq;
if (eirq->producer_consumer == ACPI_PRODUCER)
return AE_OK;
if (ctx->index >= eirq->interrupt_count) {
ctx->index -= eirq->interrupt_count;
return AE_OK;
}
fwnode = acpi_get_irq_source_fwhandle(&eirq->resource_source,
eirq->interrupts[ctx->index]);
acpi_irq_parse_one_match(fwnode, eirq->interrupts[ctx->index],
eirq->triggering, eirq->polarity,
eirq->shareable, eirq->wake_capable, ctx);
return AE_CTRL_TERMINATE;
}
return AE_OK;
}
/**
* acpi_irq_parse_one - Resolve an interrupt for a device
* @handle: the device whose interrupt is to be resolved
* @index: index of the interrupt to resolve
* @fwspec: structure irq_fwspec filled by this function
* @flags: resource flags filled by this function
*
* Description:
* Resolves an interrupt for a device by walking its CRS resources to find
* the appropriate ACPI IRQ resource and populating the given struct irq_fwspec
* and flags.
*
* Return:
* The result stored in ctx.rc by the callback, or the default -EINVAL value
* if an error occurs.
*/
static int acpi_irq_parse_one(acpi_handle handle, unsigned int index,
struct irq_fwspec *fwspec, unsigned long *flags)
{
struct acpi_irq_parse_one_ctx ctx = { -EINVAL, index, flags, fwspec };
acpi_walk_resources(handle, METHOD_NAME__CRS, acpi_irq_parse_one_cb, &ctx);
return ctx.rc;
}
/**
* acpi_irq_get - Lookup an ACPI IRQ resource and use it to initialize resource.
* @handle: ACPI device handle
* @index: ACPI IRQ resource index to lookup
* @res: Linux IRQ resource to initialize
*
* Description:
* Look for the ACPI IRQ resource with the given index and use it to initialize
* the given Linux IRQ resource.
*
* Return:
* 0 on success
* -EINVAL if an error occurs
* -EPROBE_DEFER if the IRQ lookup/conversion failed
*/
int acpi_irq_get(acpi_handle handle, unsigned int index, struct resource *res)
{
struct irq_fwspec fwspec;
struct irq_domain *domain;
unsigned long flags;
int rc;
rc = acpi_irq_parse_one(handle, index, &fwspec, &flags);
if (rc)
return rc;
domain = irq_find_matching_fwnode(fwspec.fwnode, DOMAIN_BUS_ANY);
if (!domain)
return -EPROBE_DEFER;
rc = irq_create_fwspec_mapping(&fwspec);
if (rc <= 0)
return -EINVAL;
res->start = rc;
res->end = rc;
res->flags = flags;
return 0;
}
EXPORT_SYMBOL_GPL(acpi_irq_get);
/**
* acpi_set_irq_model - Setup the GSI irqdomain information
* @model: the value assigned to acpi_irq_model
* @fwnode: the irq_domain identifier for mapping and looking up
* GSI interrupts
*/
void __init acpi_set_irq_model(enum acpi_irq_model_id model,
struct fwnode_handle *(*fn)(u32))
{
acpi_irq_model = model;
acpi_get_gsi_domain_id = fn;
}
acpi/irq: Implement helper to create hierachical domains ACPI permits arbitrary producer->consumer interrupt links to be described in AML, which means a topology such as the following is perfectly legal: Device (EXIU) { Name (_HID, "SCX0008") Name (_UID, Zero) Name (_CRS, ResourceTemplate () { ... }) } Device (GPIO) { Name (_HID, "SCX0007") Name (_UID, Zero) Name (_CRS, ResourceTemplate () { Memory32Fixed (ReadWrite, SYNQUACER_GPIO_BASE, SYNQUACER_GPIO_SIZE) Interrupt (ResourceConsumer, Edge, ActiveHigh, ExclusiveAndWake, 0, "\\_SB.EXIU") { 7, } }) ... } The EXIU in this example is the external interrupt unit as can be found on Socionext SynQuacer based platforms, which converts a block of 32 SPIs from arbitrary polarity/trigger into level-high, with a separate set of config/mask/unmask/clear controls. The existing DT based driver in drivers/irqchip/irq-sni-exiu.c models this as a hierarchical domain stacked on top of the GIC's irqdomain. Since the GIC is modeled as a DT node as well, obtaining a reference to this irqdomain is easily done by going through the parent link. On ACPI systems, however, the GIC is not modeled as an object in the namespace, and so device objects cannot refer to it directly. So in order to obtain the irqdomain reference when driving the EXIU in ACPI mode, we need a helper that implicitly grabs the default domain as the parent of the hierarchy for interrupts allocated out of the global GSI pool. Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-05-28 21:36:44 +08:00
/**
* acpi_set_gsi_to_irq_fallback - Register a GSI transfer
* callback to fallback to arch specified implementation.
* @fn: arch-specific fallback handler
*/
void __init acpi_set_gsi_to_irq_fallback(u32 (*fn)(u32))
{
acpi_gsi_to_irq_fallback = fn;
}
acpi/irq: Implement helper to create hierachical domains ACPI permits arbitrary producer->consumer interrupt links to be described in AML, which means a topology such as the following is perfectly legal: Device (EXIU) { Name (_HID, "SCX0008") Name (_UID, Zero) Name (_CRS, ResourceTemplate () { ... }) } Device (GPIO) { Name (_HID, "SCX0007") Name (_UID, Zero) Name (_CRS, ResourceTemplate () { Memory32Fixed (ReadWrite, SYNQUACER_GPIO_BASE, SYNQUACER_GPIO_SIZE) Interrupt (ResourceConsumer, Edge, ActiveHigh, ExclusiveAndWake, 0, "\\_SB.EXIU") { 7, } }) ... } The EXIU in this example is the external interrupt unit as can be found on Socionext SynQuacer based platforms, which converts a block of 32 SPIs from arbitrary polarity/trigger into level-high, with a separate set of config/mask/unmask/clear controls. The existing DT based driver in drivers/irqchip/irq-sni-exiu.c models this as a hierarchical domain stacked on top of the GIC's irqdomain. Since the GIC is modeled as a DT node as well, obtaining a reference to this irqdomain is easily done by going through the parent link. On ACPI systems, however, the GIC is not modeled as an object in the namespace, and so device objects cannot refer to it directly. So in order to obtain the irqdomain reference when driving the EXIU in ACPI mode, we need a helper that implicitly grabs the default domain as the parent of the hierarchy for interrupts allocated out of the global GSI pool. Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-05-28 21:36:44 +08:00
/**
* acpi_irq_create_hierarchy - Create a hierarchical IRQ domain with the default
* GSI domain as its parent.
* @flags: Irq domain flags associated with the domain
* @size: Size of the domain.
* @fwnode: Optional fwnode of the interrupt controller
* @ops: Pointer to the interrupt domain callbacks
* @host_data: Controller private data pointer
*/
struct irq_domain *acpi_irq_create_hierarchy(unsigned int flags,
unsigned int size,
struct fwnode_handle *fwnode,
const struct irq_domain_ops *ops,
void *host_data)
{
struct irq_domain *d;
/* This only works for the GIC model... */
if (acpi_irq_model != ACPI_IRQ_MODEL_GIC)
return NULL;
d = irq_find_matching_fwnode(acpi_get_gsi_domain_id(0),
DOMAIN_BUS_ANY);
acpi/irq: Implement helper to create hierachical domains ACPI permits arbitrary producer->consumer interrupt links to be described in AML, which means a topology such as the following is perfectly legal: Device (EXIU) { Name (_HID, "SCX0008") Name (_UID, Zero) Name (_CRS, ResourceTemplate () { ... }) } Device (GPIO) { Name (_HID, "SCX0007") Name (_UID, Zero) Name (_CRS, ResourceTemplate () { Memory32Fixed (ReadWrite, SYNQUACER_GPIO_BASE, SYNQUACER_GPIO_SIZE) Interrupt (ResourceConsumer, Edge, ActiveHigh, ExclusiveAndWake, 0, "\\_SB.EXIU") { 7, } }) ... } The EXIU in this example is the external interrupt unit as can be found on Socionext SynQuacer based platforms, which converts a block of 32 SPIs from arbitrary polarity/trigger into level-high, with a separate set of config/mask/unmask/clear controls. The existing DT based driver in drivers/irqchip/irq-sni-exiu.c models this as a hierarchical domain stacked on top of the GIC's irqdomain. Since the GIC is modeled as a DT node as well, obtaining a reference to this irqdomain is easily done by going through the parent link. On ACPI systems, however, the GIC is not modeled as an object in the namespace, and so device objects cannot refer to it directly. So in order to obtain the irqdomain reference when driving the EXIU in ACPI mode, we need a helper that implicitly grabs the default domain as the parent of the hierarchy for interrupts allocated out of the global GSI pool. Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-05-28 21:36:44 +08:00
if (!d)
return NULL;
return irq_domain_create_hierarchy(d, flags, size, fwnode, ops,
host_data);
}
EXPORT_SYMBOL_GPL(acpi_irq_create_hierarchy);