OpenCloudOS-Kernel/drivers/s390/cio/qdio_main.c

1579 lines
38 KiB
C
Raw Normal View History

/*
* linux/drivers/s390/cio/qdio_main.c
*
* Linux for s390 qdio support, buffer handling, qdio API and module support.
*
* Copyright 2000,2008 IBM Corp.
* Author(s): Utz Bacher <utz.bacher@de.ibm.com>
* Jan Glauber <jang@linux.vnet.ibm.com>
* 2.6 cio integration by Cornelia Huck <cornelia.huck@de.ibm.com>
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/timer.h>
#include <linux/delay.h>
#include <asm/atomic.h>
#include <asm/debug.h>
#include <asm/qdio.h>
#include "cio.h"
#include "css.h"
#include "device.h"
#include "qdio.h"
#include "qdio_debug.h"
#include "qdio_perf.h"
MODULE_AUTHOR("Utz Bacher <utz.bacher@de.ibm.com>,"\
"Jan Glauber <jang@linux.vnet.ibm.com>");
MODULE_DESCRIPTION("QDIO base support");
MODULE_LICENSE("GPL");
static inline int do_siga_sync(struct subchannel_id schid,
unsigned int out_mask, unsigned int in_mask)
{
register unsigned long __fc asm ("0") = 2;
register struct subchannel_id __schid asm ("1") = schid;
register unsigned long out asm ("2") = out_mask;
register unsigned long in asm ("3") = in_mask;
int cc;
asm volatile(
" siga 0\n"
" ipm %0\n"
" srl %0,28\n"
: "=d" (cc)
: "d" (__fc), "d" (__schid), "d" (out), "d" (in) : "cc");
return cc;
}
static inline int do_siga_input(struct subchannel_id schid, unsigned int mask)
{
register unsigned long __fc asm ("0") = 1;
register struct subchannel_id __schid asm ("1") = schid;
register unsigned long __mask asm ("2") = mask;
int cc;
asm volatile(
" siga 0\n"
" ipm %0\n"
" srl %0,28\n"
: "=d" (cc)
: "d" (__fc), "d" (__schid), "d" (__mask) : "cc", "memory");
return cc;
}
/**
* do_siga_output - perform SIGA-w/wt function
* @schid: subchannel id or in case of QEBSM the subchannel token
* @mask: which output queues to process
* @bb: busy bit indicator, set only if SIGA-w/wt could not access a buffer
* @fc: function code to perform
*
* Returns cc or QDIO_ERROR_SIGA_ACCESS_EXCEPTION.
* Note: For IQDC unicast queues only the highest priority queue is processed.
*/
static inline int do_siga_output(unsigned long schid, unsigned long mask,
unsigned int *bb, unsigned int fc)
{
register unsigned long __fc asm("0") = fc;
register unsigned long __schid asm("1") = schid;
register unsigned long __mask asm("2") = mask;
int cc = QDIO_ERROR_SIGA_ACCESS_EXCEPTION;
asm volatile(
" siga 0\n"
"0: ipm %0\n"
" srl %0,28\n"
"1:\n"
EX_TABLE(0b, 1b)
: "+d" (cc), "+d" (__fc), "+d" (__schid), "+d" (__mask)
: : "cc", "memory");
*bb = ((unsigned int) __fc) >> 31;
return cc;
}
static inline int qdio_check_ccq(struct qdio_q *q, unsigned int ccq)
{
/* all done or next buffer state different */
if (ccq == 0 || ccq == 32)
return 0;
/* not all buffers processed */
if (ccq == 96 || ccq == 97)
return 1;
/* notify devices immediately */
DBF_ERROR("%4x ccq:%3d", SCH_NO(q), ccq);
return -EIO;
}
/**
* qdio_do_eqbs - extract buffer states for QEBSM
* @q: queue to manipulate
* @state: state of the extracted buffers
* @start: buffer number to start at
* @count: count of buffers to examine
* @auto_ack: automatically acknowledge buffers
*
* Returns the number of successfully extracted equal buffer states.
* Stops processing if a state is different from the last buffers state.
*/
static int qdio_do_eqbs(struct qdio_q *q, unsigned char *state,
int start, int count, int auto_ack)
{
unsigned int ccq = 0;
int tmp_count = count, tmp_start = start;
int nr = q->nr;
int rc;
BUG_ON(!q->irq_ptr->sch_token);
qdio_perf_stat_inc(&perf_stats.debug_eqbs_all);
if (!q->is_input_q)
nr += q->irq_ptr->nr_input_qs;
again:
ccq = do_eqbs(q->irq_ptr->sch_token, state, nr, &tmp_start, &tmp_count,
auto_ack);
rc = qdio_check_ccq(q, ccq);
/* At least one buffer was processed, return and extract the remaining
* buffers later.
*/
if ((ccq == 96) && (count != tmp_count)) {
qdio_perf_stat_inc(&perf_stats.debug_eqbs_incomplete);
return (count - tmp_count);
}
if (rc == 1) {
DBF_DEV_EVENT(DBF_WARN, q->irq_ptr, "EQBS again:%2d", ccq);
goto again;
}
if (rc < 0) {
DBF_ERROR("%4x EQBS ERROR", SCH_NO(q));
DBF_ERROR("%3d%3d%2d", count, tmp_count, nr);
q->handler(q->irq_ptr->cdev,
QDIO_ERROR_ACTIVATE_CHECK_CONDITION,
0, -1, -1, q->irq_ptr->int_parm);
return 0;
}
return count - tmp_count;
}
/**
* qdio_do_sqbs - set buffer states for QEBSM
* @q: queue to manipulate
* @state: new state of the buffers
* @start: first buffer number to change
* @count: how many buffers to change
*
* Returns the number of successfully changed buffers.
* Does retrying until the specified count of buffer states is set or an
* error occurs.
*/
static int qdio_do_sqbs(struct qdio_q *q, unsigned char state, int start,
int count)
{
unsigned int ccq = 0;
int tmp_count = count, tmp_start = start;
int nr = q->nr;
int rc;
if (!count)
return 0;
BUG_ON(!q->irq_ptr->sch_token);
qdio_perf_stat_inc(&perf_stats.debug_sqbs_all);
if (!q->is_input_q)
nr += q->irq_ptr->nr_input_qs;
again:
ccq = do_sqbs(q->irq_ptr->sch_token, state, nr, &tmp_start, &tmp_count);
rc = qdio_check_ccq(q, ccq);
if (rc == 1) {
DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "SQBS again:%2d", ccq);
qdio_perf_stat_inc(&perf_stats.debug_sqbs_incomplete);
goto again;
}
if (rc < 0) {
DBF_ERROR("%4x SQBS ERROR", SCH_NO(q));
DBF_ERROR("%3d%3d%2d", count, tmp_count, nr);
q->handler(q->irq_ptr->cdev,
QDIO_ERROR_ACTIVATE_CHECK_CONDITION,
0, -1, -1, q->irq_ptr->int_parm);
return 0;
}
WARN_ON(tmp_count);
return count - tmp_count;
}
/* returns number of examined buffers and their common state in *state */
static inline int get_buf_states(struct qdio_q *q, unsigned int bufnr,
unsigned char *state, unsigned int count,
int auto_ack)
{
unsigned char __state = 0;
int i;
BUG_ON(bufnr > QDIO_MAX_BUFFERS_MASK);
BUG_ON(count > QDIO_MAX_BUFFERS_PER_Q);
if (is_qebsm(q))
return qdio_do_eqbs(q, state, bufnr, count, auto_ack);
for (i = 0; i < count; i++) {
if (!__state)
__state = q->slsb.val[bufnr];
else if (q->slsb.val[bufnr] != __state)
break;
bufnr = next_buf(bufnr);
}
*state = __state;
return i;
}
static inline int get_buf_state(struct qdio_q *q, unsigned int bufnr,
unsigned char *state, int auto_ack)
{
return get_buf_states(q, bufnr, state, 1, auto_ack);
}
/* wrap-around safe setting of slsb states, returns number of changed buffers */
static inline int set_buf_states(struct qdio_q *q, int bufnr,
unsigned char state, int count)
{
int i;
BUG_ON(bufnr > QDIO_MAX_BUFFERS_MASK);
BUG_ON(count > QDIO_MAX_BUFFERS_PER_Q);
if (is_qebsm(q))
return qdio_do_sqbs(q, state, bufnr, count);
for (i = 0; i < count; i++) {
xchg(&q->slsb.val[bufnr], state);
bufnr = next_buf(bufnr);
}
return count;
}
static inline int set_buf_state(struct qdio_q *q, int bufnr,
unsigned char state)
{
return set_buf_states(q, bufnr, state, 1);
}
/* set slsb states to initial state */
void qdio_init_buf_states(struct qdio_irq *irq_ptr)
{
struct qdio_q *q;
int i;
for_each_input_queue(irq_ptr, q, i)
set_buf_states(q, 0, SLSB_P_INPUT_NOT_INIT,
QDIO_MAX_BUFFERS_PER_Q);
for_each_output_queue(irq_ptr, q, i)
set_buf_states(q, 0, SLSB_P_OUTPUT_NOT_INIT,
QDIO_MAX_BUFFERS_PER_Q);
}
static inline int qdio_siga_sync(struct qdio_q *q, unsigned int output,
unsigned int input)
{
int cc;
if (!need_siga_sync(q))
return 0;
DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "siga-s:%1d", q->nr);
qdio_perf_stat_inc(&perf_stats.siga_sync);
cc = do_siga_sync(q->irq_ptr->schid, output, input);
if (cc)
DBF_ERROR("%4x SIGA-S:%2d", SCH_NO(q), cc);
return cc;
}
static inline int qdio_siga_sync_q(struct qdio_q *q)
{
if (q->is_input_q)
return qdio_siga_sync(q, 0, q->mask);
else
return qdio_siga_sync(q, q->mask, 0);
}
static inline int qdio_siga_sync_out(struct qdio_q *q)
{
return qdio_siga_sync(q, ~0U, 0);
}
static inline int qdio_siga_sync_all(struct qdio_q *q)
{
return qdio_siga_sync(q, ~0U, ~0U);
}
static int qdio_siga_output(struct qdio_q *q, unsigned int *busy_bit)
{
unsigned long schid;
unsigned int fc = 0;
u64 start_time = 0;
int cc;
if (q->u.out.use_enh_siga)
fc = 3;
if (is_qebsm(q)) {
schid = q->irq_ptr->sch_token;
fc |= 0x80;
}
else
schid = *((u32 *)&q->irq_ptr->schid);
again:
cc = do_siga_output(schid, q->mask, busy_bit, fc);
/* hipersocket busy condition */
if (*busy_bit) {
WARN_ON(queue_type(q) != QDIO_IQDIO_QFMT || cc != 2);
if (!start_time) {
start_time = get_usecs();
goto again;
}
if ((get_usecs() - start_time) < QDIO_BUSY_BIT_PATIENCE)
goto again;
}
return cc;
}
static inline int qdio_siga_input(struct qdio_q *q)
{
int cc;
DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "siga-r:%1d", q->nr);
qdio_perf_stat_inc(&perf_stats.siga_in);
cc = do_siga_input(q->irq_ptr->schid, q->mask);
if (cc)
DBF_ERROR("%4x SIGA-R:%2d", SCH_NO(q), cc);
return cc;
}
static inline void qdio_sync_after_thinint(struct qdio_q *q)
{
if (pci_out_supported(q)) {
if (need_siga_sync_thinint(q))
qdio_siga_sync_all(q);
else if (need_siga_sync_out_thinint(q))
qdio_siga_sync_out(q);
} else
qdio_siga_sync_q(q);
}
int debug_get_buf_state(struct qdio_q *q, unsigned int bufnr,
unsigned char *state)
{
qdio_siga_sync_q(q);
return get_buf_states(q, bufnr, state, 1, 0);
}
static inline void qdio_stop_polling(struct qdio_q *q)
{
if (!q->u.in.polling)
return;
q->u.in.polling = 0;
qdio_perf_stat_inc(&perf_stats.debug_stop_polling);
/* show the card that we are not polling anymore */
if (is_qebsm(q)) {
set_buf_states(q, q->u.in.ack_start, SLSB_P_INPUT_NOT_INIT,
q->u.in.ack_count);
q->u.in.ack_count = 0;
} else
set_buf_state(q, q->u.in.ack_start, SLSB_P_INPUT_NOT_INIT);
}
static void announce_buffer_error(struct qdio_q *q, int count)
{
q->qdio_error |= QDIO_ERROR_SLSB_STATE;
/* special handling for no target buffer empty */
if ((!q->is_input_q &&
(q->sbal[q->first_to_check]->element[15].flags & 0xff) == 0x10)) {
qdio_perf_stat_inc(&perf_stats.outbound_target_full);
DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "OUTFULL FTC:%3d",
q->first_to_check);
return;
}
DBF_ERROR("%4x BUF ERROR", SCH_NO(q));
DBF_ERROR((q->is_input_q) ? "IN:%2d" : "OUT:%2d", q->nr);
DBF_ERROR("FTC:%3d C:%3d", q->first_to_check, count);
DBF_ERROR("F14:%2x F15:%2x",
q->sbal[q->first_to_check]->element[14].flags & 0xff,
q->sbal[q->first_to_check]->element[15].flags & 0xff);
}
static inline void inbound_primed(struct qdio_q *q, int count)
{
int new;
DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "in prim: %3d", count);
/* for QEBSM the ACK was already set by EQBS */
if (is_qebsm(q)) {
if (!q->u.in.polling) {
q->u.in.polling = 1;
q->u.in.ack_count = count;
q->u.in.ack_start = q->first_to_check;
return;
}
/* delete the previous ACK's */
set_buf_states(q, q->u.in.ack_start, SLSB_P_INPUT_NOT_INIT,
q->u.in.ack_count);
q->u.in.ack_count = count;
q->u.in.ack_start = q->first_to_check;
return;
}
/*
* ACK the newest buffer. The ACK will be removed in qdio_stop_polling
* or by the next inbound run.
*/
new = add_buf(q->first_to_check, count - 1);
if (q->u.in.polling) {
/* reset the previous ACK but first set the new one */
set_buf_state(q, new, SLSB_P_INPUT_ACK);
set_buf_state(q, q->u.in.ack_start, SLSB_P_INPUT_NOT_INIT);
} else {
q->u.in.polling = 1;
set_buf_state(q, new, SLSB_P_INPUT_ACK);
}
q->u.in.ack_start = new;
count--;
if (!count)
return;
}
static int get_inbound_buffer_frontier(struct qdio_q *q)
{
int count, stop;
unsigned char state;
/*
* Don't check 128 buffers, as otherwise qdio_inbound_q_moved
* would return 0.
*/
count = min(atomic_read(&q->nr_buf_used), QDIO_MAX_BUFFERS_MASK);
stop = add_buf(q->first_to_check, count);
if (q->first_to_check == stop)
goto out;
/*
* No siga sync here, as a PCI or we after a thin interrupt
* already sync'ed the queues.
*/
count = get_buf_states(q, q->first_to_check, &state, count, 1);
if (!count)
goto out;
switch (state) {
case SLSB_P_INPUT_PRIMED:
inbound_primed(q, count);
q->first_to_check = add_buf(q->first_to_check, count);
atomic_sub(count, &q->nr_buf_used);
break;
case SLSB_P_INPUT_ERROR:
announce_buffer_error(q, count);
/* process the buffer, the upper layer will take care of it */
q->first_to_check = add_buf(q->first_to_check, count);
atomic_sub(count, &q->nr_buf_used);
break;
case SLSB_CU_INPUT_EMPTY:
case SLSB_P_INPUT_NOT_INIT:
case SLSB_P_INPUT_ACK:
DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "in nop");
break;
default:
BUG();
}
out:
return q->first_to_check;
}
static int qdio_inbound_q_moved(struct qdio_q *q)
{
int bufnr;
bufnr = get_inbound_buffer_frontier(q);
if ((bufnr != q->last_move) || q->qdio_error) {
q->last_move = bufnr;
if (!is_thinint_irq(q->irq_ptr) && !MACHINE_IS_VM)
q->u.in.timestamp = get_usecs();
return 1;
} else
return 0;
}
static inline int qdio_inbound_q_done(struct qdio_q *q)
{
unsigned char state = 0;
if (!atomic_read(&q->nr_buf_used))
return 1;
qdio_siga_sync_q(q);
get_buf_state(q, q->first_to_check, &state, 0);
if (state == SLSB_P_INPUT_PRIMED)
/* more work coming */
return 0;
if (is_thinint_irq(q->irq_ptr))
return 1;
/* don't poll under z/VM */
if (MACHINE_IS_VM)
return 1;
/*
* At this point we know, that inbound first_to_check
* has (probably) not moved (see qdio_inbound_processing).
*/
if (get_usecs() > q->u.in.timestamp + QDIO_INPUT_THRESHOLD) {
DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "in done:%3d",
q->first_to_check);
return 1;
} else
return 0;
}
static void qdio_kick_handler(struct qdio_q *q)
{
int start = q->first_to_kick;
int end = q->first_to_check;
int count;
if (unlikely(q->irq_ptr->state != QDIO_IRQ_STATE_ACTIVE))
return;
count = sub_buf(end, start);
if (q->is_input_q) {
qdio_perf_stat_inc(&perf_stats.inbound_handler);
DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "kih s:%3d c:%3d", start, count);
} else {
DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "koh: nr:%1d", q->nr);
DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "s:%3d c:%3d", start, count);
}
q->handler(q->irq_ptr->cdev, q->qdio_error, q->nr, start, count,
q->irq_ptr->int_parm);
/* for the next time */
q->first_to_kick = end;
q->qdio_error = 0;
}
static void __qdio_inbound_processing(struct qdio_q *q)
{
qdio_perf_stat_inc(&perf_stats.tasklet_inbound);
again:
if (!qdio_inbound_q_moved(q))
return;
qdio_kick_handler(q);
if (!qdio_inbound_q_done(q))
/* means poll time is not yet over */
goto again;
qdio_stop_polling(q);
/*
* We need to check again to not lose initiative after
* resetting the ACK state.
*/
if (!qdio_inbound_q_done(q))
goto again;
}
void qdio_inbound_processing(unsigned long data)
{
struct qdio_q *q = (struct qdio_q *)data;
__qdio_inbound_processing(q);
}
static int get_outbound_buffer_frontier(struct qdio_q *q)
{
int count, stop;
unsigned char state;
if (((queue_type(q) != QDIO_IQDIO_QFMT) && !pci_out_supported(q)) ||
(queue_type(q) == QDIO_IQDIO_QFMT && multicast_outbound(q)))
qdio_siga_sync_q(q);
/*
* Don't check 128 buffers, as otherwise qdio_inbound_q_moved
* would return 0.
*/
count = min(atomic_read(&q->nr_buf_used), QDIO_MAX_BUFFERS_MASK);
stop = add_buf(q->first_to_check, count);
if (q->first_to_check == stop)
return q->first_to_check;
count = get_buf_states(q, q->first_to_check, &state, count, 0);
if (!count)
return q->first_to_check;
switch (state) {
case SLSB_P_OUTPUT_EMPTY:
/* the adapter got it */
DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "out empty:%1d %3d", q->nr, count);
atomic_sub(count, &q->nr_buf_used);
q->first_to_check = add_buf(q->first_to_check, count);
break;
case SLSB_P_OUTPUT_ERROR:
announce_buffer_error(q, count);
/* process the buffer, the upper layer will take care of it */
q->first_to_check = add_buf(q->first_to_check, count);
atomic_sub(count, &q->nr_buf_used);
break;
case SLSB_CU_OUTPUT_PRIMED:
/* the adapter has not fetched the output yet */
DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "out primed:%1d", q->nr);
break;
case SLSB_P_OUTPUT_NOT_INIT:
case SLSB_P_OUTPUT_HALTED:
break;
default:
BUG();
}
return q->first_to_check;
}
/* all buffers processed? */
static inline int qdio_outbound_q_done(struct qdio_q *q)
{
return atomic_read(&q->nr_buf_used) == 0;
}
static inline int qdio_outbound_q_moved(struct qdio_q *q)
{
int bufnr;
bufnr = get_outbound_buffer_frontier(q);
if ((bufnr != q->last_move) || q->qdio_error) {
q->last_move = bufnr;
DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "out moved:%1d", q->nr);
return 1;
} else
return 0;
}
static int qdio_kick_outbound_q(struct qdio_q *q)
{
unsigned int busy_bit;
int cc;
if (!need_siga_out(q))
return 0;
DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "siga-w:%1d", q->nr);
qdio_perf_stat_inc(&perf_stats.siga_out);
cc = qdio_siga_output(q, &busy_bit);
switch (cc) {
case 0:
break;
case 2:
if (busy_bit) {
DBF_ERROR("%4x cc2 REP:%1d", SCH_NO(q), q->nr);
cc |= QDIO_ERROR_SIGA_BUSY;
} else
DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "siga-w cc2:%1d", q->nr);
break;
case 1:
case 3:
DBF_ERROR("%4x SIGA-W:%1d", SCH_NO(q), cc);
break;
}
return cc;
}
static void __qdio_outbound_processing(struct qdio_q *q)
{
qdio_perf_stat_inc(&perf_stats.tasklet_outbound);
BUG_ON(atomic_read(&q->nr_buf_used) < 0);
if (qdio_outbound_q_moved(q))
qdio_kick_handler(q);
[S390] qdio: proper kill of qdio tasklets The queue tasklets were stopped with tasklet_disable. Although tasklet_disable prevents the tasklet from beeing executed it is still possible that a tasklet is scheduled on a CPU at that point. A following qdio_establish calls tasklet_init which clears the tasklet count and the tasklet state leading to the following Oops: <2>kernel BUG at kernel/softirq.c:392! <4>illegal operation: 0001 [#1] SMP <4>Modules linked in: iptable_filter ip_tables x_tables dm_round_robin dm_multipath scsi_dh sg sd_mod crc_t10dif nfs lockd nfs _acl sunrpc fuse loop dm_mod qeth_l3 ipv6 zfcp qeth scsi_transport_fc qdio scsi_tgt scsi_mod chsc_sch ccwgroup dasd_eckd_mod dasdm od ext3 mbcache jbd <4>Supported: Yes <4>CPU: 0 Not tainted 2.6.27.13-1.1.mz13-default #1 <4>Process blast.LzS_64 (pid: 16445, task: 000000006cc02538, ksp: 000000006cb67998) <4>Krnl PSW : 0704c00180000000 00000000001399f4 (tasklet_action+0xc8/0x1d4) <4> R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 EA:3 <4>Krnl GPRS: ffffffff00000030 0000000000000002 0000000000000002 fffffffffffffffe <4> 000000000013aabe 00000000003b6a18 fffffffffffffffd 0000000000000000 <4> 00000000006705a8 000000007d0914a8 000000007d0914b0 000000007fecfd30 <4> 0000000000000000 00000000003b63e8 000000007fecfd90 000000007fecfd30 <4>Krnl Code: 00000000001399e8: b9200021 cgr %r2,%r1 <4> 00000000001399ec: a7740004 brc 7,1399f4 <4> 00000000001399f0: a7f40001 brc 15,1399f2 <4> >00000000001399f4: c0100027e8ee larl %r1,636bd0 <4> 00000000001399fa: bf1f1008 icm %r1,15,8(%r1) <4> 00000000001399fe: a7840019 brc 8,139a30 <4> 0000000000139a02: c0300027e8ef larl %r3,636be0 <4> 0000000000139a08: e3c030000004 lg %r12,0(%r3) <4>Call Trace: <4>([<0000000000139c12>] tasklet_hi_action+0x112/0x1d4) <4> [<000000000013aabe>] __do_softirq+0xde/0x1c4 <4> [<000000000010fa2e>] do_softirq+0x96/0xb0 <4> [<000000000013a8d8>] irq_exit+0x70/0xcc <4> [<000000000010d1d8>] do_extint+0xf0/0x110 <4> [<0000000000113b10>] ext_no_vtime+0x16/0x1a <4> [<000003e0000a3662>] ext3_dirty_inode+0xe6/0xe8 [ext3] <4>([<00000000001f6cf2>] __mark_inode_dirty+0x52/0x1d4) <4> [<000003e0000a44f0>] ext3_ordered_write_end+0x138/0x190 [ext3] <4> [<000000000018d5ec>] generic_perform_write+0x174/0x230 <4> [<0000000000190144>] generic_file_buffered_write+0xb4/0x194 <4> [<0000000000190864>] __generic_file_aio_write_nolock+0x418/0x454 <4> [<0000000000190ee2>] generic_file_aio_write+0x76/0xe4 <4> [<000003e0000a05c2>] ext3_file_write+0x3e/0xc8 [ext3] <4> [<00000000001cc2fe>] do_sync_write+0xd6/0x120 <4> [<00000000001ccfc8>] vfs_write+0xac/0x184 <4> [<00000000001cd218>] SyS_write+0x68/0xe0 <4> [<0000000000113402>] sysc_noemu+0x10/0x16 <4> [<0000020000043188>] 0x20000043188 <4>Last Breaking-Event-Address: <4> [<00000000001399f0>] tasklet_action+0xc4/0x1d4 <6>qdio: 0.0.c61b ZFCP on SC f67 using AI:1 QEBSM:0 PCI:1 TDD:1 SIGA: W AOP <4> <0>Kernel panic - not syncing: Fatal exception in interrupt Use tasklet_kill instead of tasklet_disbale. Since tasklet_schedule must not be called after tasklet_kill use the QDIO_IRQ_STATE_STOPPED to inidicate that a queue is going down and prevent further tasklet schedules in that case. Remove superflous tasklet_schedule from input queue setup, at that time the queues are not ready so the schedule results in a NOP. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-03-26 22:24:26 +08:00
if (queue_type(q) == QDIO_ZFCP_QFMT)
if (!pci_out_supported(q) && !qdio_outbound_q_done(q))
[S390] qdio: proper kill of qdio tasklets The queue tasklets were stopped with tasklet_disable. Although tasklet_disable prevents the tasklet from beeing executed it is still possible that a tasklet is scheduled on a CPU at that point. A following qdio_establish calls tasklet_init which clears the tasklet count and the tasklet state leading to the following Oops: <2>kernel BUG at kernel/softirq.c:392! <4>illegal operation: 0001 [#1] SMP <4>Modules linked in: iptable_filter ip_tables x_tables dm_round_robin dm_multipath scsi_dh sg sd_mod crc_t10dif nfs lockd nfs _acl sunrpc fuse loop dm_mod qeth_l3 ipv6 zfcp qeth scsi_transport_fc qdio scsi_tgt scsi_mod chsc_sch ccwgroup dasd_eckd_mod dasdm od ext3 mbcache jbd <4>Supported: Yes <4>CPU: 0 Not tainted 2.6.27.13-1.1.mz13-default #1 <4>Process blast.LzS_64 (pid: 16445, task: 000000006cc02538, ksp: 000000006cb67998) <4>Krnl PSW : 0704c00180000000 00000000001399f4 (tasklet_action+0xc8/0x1d4) <4> R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 EA:3 <4>Krnl GPRS: ffffffff00000030 0000000000000002 0000000000000002 fffffffffffffffe <4> 000000000013aabe 00000000003b6a18 fffffffffffffffd 0000000000000000 <4> 00000000006705a8 000000007d0914a8 000000007d0914b0 000000007fecfd30 <4> 0000000000000000 00000000003b63e8 000000007fecfd90 000000007fecfd30 <4>Krnl Code: 00000000001399e8: b9200021 cgr %r2,%r1 <4> 00000000001399ec: a7740004 brc 7,1399f4 <4> 00000000001399f0: a7f40001 brc 15,1399f2 <4> >00000000001399f4: c0100027e8ee larl %r1,636bd0 <4> 00000000001399fa: bf1f1008 icm %r1,15,8(%r1) <4> 00000000001399fe: a7840019 brc 8,139a30 <4> 0000000000139a02: c0300027e8ef larl %r3,636be0 <4> 0000000000139a08: e3c030000004 lg %r12,0(%r3) <4>Call Trace: <4>([<0000000000139c12>] tasklet_hi_action+0x112/0x1d4) <4> [<000000000013aabe>] __do_softirq+0xde/0x1c4 <4> [<000000000010fa2e>] do_softirq+0x96/0xb0 <4> [<000000000013a8d8>] irq_exit+0x70/0xcc <4> [<000000000010d1d8>] do_extint+0xf0/0x110 <4> [<0000000000113b10>] ext_no_vtime+0x16/0x1a <4> [<000003e0000a3662>] ext3_dirty_inode+0xe6/0xe8 [ext3] <4>([<00000000001f6cf2>] __mark_inode_dirty+0x52/0x1d4) <4> [<000003e0000a44f0>] ext3_ordered_write_end+0x138/0x190 [ext3] <4> [<000000000018d5ec>] generic_perform_write+0x174/0x230 <4> [<0000000000190144>] generic_file_buffered_write+0xb4/0x194 <4> [<0000000000190864>] __generic_file_aio_write_nolock+0x418/0x454 <4> [<0000000000190ee2>] generic_file_aio_write+0x76/0xe4 <4> [<000003e0000a05c2>] ext3_file_write+0x3e/0xc8 [ext3] <4> [<00000000001cc2fe>] do_sync_write+0xd6/0x120 <4> [<00000000001ccfc8>] vfs_write+0xac/0x184 <4> [<00000000001cd218>] SyS_write+0x68/0xe0 <4> [<0000000000113402>] sysc_noemu+0x10/0x16 <4> [<0000020000043188>] 0x20000043188 <4>Last Breaking-Event-Address: <4> [<00000000001399f0>] tasklet_action+0xc4/0x1d4 <6>qdio: 0.0.c61b ZFCP on SC f67 using AI:1 QEBSM:0 PCI:1 TDD:1 SIGA: W AOP <4> <0>Kernel panic - not syncing: Fatal exception in interrupt Use tasklet_kill instead of tasklet_disbale. Since tasklet_schedule must not be called after tasklet_kill use the QDIO_IRQ_STATE_STOPPED to inidicate that a queue is going down and prevent further tasklet schedules in that case. Remove superflous tasklet_schedule from input queue setup, at that time the queues are not ready so the schedule results in a NOP. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-03-26 22:24:26 +08:00
goto sched;
/* bail out for HiperSockets unicast queues */
if (queue_type(q) == QDIO_IQDIO_QFMT && !multicast_outbound(q))
return;
if ((queue_type(q) == QDIO_IQDIO_QFMT) &&
[S390] qdio: proper kill of qdio tasklets The queue tasklets were stopped with tasklet_disable. Although tasklet_disable prevents the tasklet from beeing executed it is still possible that a tasklet is scheduled on a CPU at that point. A following qdio_establish calls tasklet_init which clears the tasklet count and the tasklet state leading to the following Oops: <2>kernel BUG at kernel/softirq.c:392! <4>illegal operation: 0001 [#1] SMP <4>Modules linked in: iptable_filter ip_tables x_tables dm_round_robin dm_multipath scsi_dh sg sd_mod crc_t10dif nfs lockd nfs _acl sunrpc fuse loop dm_mod qeth_l3 ipv6 zfcp qeth scsi_transport_fc qdio scsi_tgt scsi_mod chsc_sch ccwgroup dasd_eckd_mod dasdm od ext3 mbcache jbd <4>Supported: Yes <4>CPU: 0 Not tainted 2.6.27.13-1.1.mz13-default #1 <4>Process blast.LzS_64 (pid: 16445, task: 000000006cc02538, ksp: 000000006cb67998) <4>Krnl PSW : 0704c00180000000 00000000001399f4 (tasklet_action+0xc8/0x1d4) <4> R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 EA:3 <4>Krnl GPRS: ffffffff00000030 0000000000000002 0000000000000002 fffffffffffffffe <4> 000000000013aabe 00000000003b6a18 fffffffffffffffd 0000000000000000 <4> 00000000006705a8 000000007d0914a8 000000007d0914b0 000000007fecfd30 <4> 0000000000000000 00000000003b63e8 000000007fecfd90 000000007fecfd30 <4>Krnl Code: 00000000001399e8: b9200021 cgr %r2,%r1 <4> 00000000001399ec: a7740004 brc 7,1399f4 <4> 00000000001399f0: a7f40001 brc 15,1399f2 <4> >00000000001399f4: c0100027e8ee larl %r1,636bd0 <4> 00000000001399fa: bf1f1008 icm %r1,15,8(%r1) <4> 00000000001399fe: a7840019 brc 8,139a30 <4> 0000000000139a02: c0300027e8ef larl %r3,636be0 <4> 0000000000139a08: e3c030000004 lg %r12,0(%r3) <4>Call Trace: <4>([<0000000000139c12>] tasklet_hi_action+0x112/0x1d4) <4> [<000000000013aabe>] __do_softirq+0xde/0x1c4 <4> [<000000000010fa2e>] do_softirq+0x96/0xb0 <4> [<000000000013a8d8>] irq_exit+0x70/0xcc <4> [<000000000010d1d8>] do_extint+0xf0/0x110 <4> [<0000000000113b10>] ext_no_vtime+0x16/0x1a <4> [<000003e0000a3662>] ext3_dirty_inode+0xe6/0xe8 [ext3] <4>([<00000000001f6cf2>] __mark_inode_dirty+0x52/0x1d4) <4> [<000003e0000a44f0>] ext3_ordered_write_end+0x138/0x190 [ext3] <4> [<000000000018d5ec>] generic_perform_write+0x174/0x230 <4> [<0000000000190144>] generic_file_buffered_write+0xb4/0x194 <4> [<0000000000190864>] __generic_file_aio_write_nolock+0x418/0x454 <4> [<0000000000190ee2>] generic_file_aio_write+0x76/0xe4 <4> [<000003e0000a05c2>] ext3_file_write+0x3e/0xc8 [ext3] <4> [<00000000001cc2fe>] do_sync_write+0xd6/0x120 <4> [<00000000001ccfc8>] vfs_write+0xac/0x184 <4> [<00000000001cd218>] SyS_write+0x68/0xe0 <4> [<0000000000113402>] sysc_noemu+0x10/0x16 <4> [<0000020000043188>] 0x20000043188 <4>Last Breaking-Event-Address: <4> [<00000000001399f0>] tasklet_action+0xc4/0x1d4 <6>qdio: 0.0.c61b ZFCP on SC f67 using AI:1 QEBSM:0 PCI:1 TDD:1 SIGA: W AOP <4> <0>Kernel panic - not syncing: Fatal exception in interrupt Use tasklet_kill instead of tasklet_disbale. Since tasklet_schedule must not be called after tasklet_kill use the QDIO_IRQ_STATE_STOPPED to inidicate that a queue is going down and prevent further tasklet schedules in that case. Remove superflous tasklet_schedule from input queue setup, at that time the queues are not ready so the schedule results in a NOP. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-03-26 22:24:26 +08:00
(atomic_read(&q->nr_buf_used)) > QDIO_IQDIO_POLL_LVL)
goto sched;
if (q->u.out.pci_out_enabled)
return;
/*
* Now we know that queue type is either qeth without pci enabled
* or HiperSockets multicast. Make sure buffer switch from PRIMED to
* EMPTY is noticed and outbound_handler is called after some time.
*/
if (qdio_outbound_q_done(q))
del_timer(&q->u.out.timer);
else {
if (!timer_pending(&q->u.out.timer)) {
mod_timer(&q->u.out.timer, jiffies + 10 * HZ);
qdio_perf_stat_inc(&perf_stats.debug_tl_out_timer);
}
}
[S390] qdio: proper kill of qdio tasklets The queue tasklets were stopped with tasklet_disable. Although tasklet_disable prevents the tasklet from beeing executed it is still possible that a tasklet is scheduled on a CPU at that point. A following qdio_establish calls tasklet_init which clears the tasklet count and the tasklet state leading to the following Oops: <2>kernel BUG at kernel/softirq.c:392! <4>illegal operation: 0001 [#1] SMP <4>Modules linked in: iptable_filter ip_tables x_tables dm_round_robin dm_multipath scsi_dh sg sd_mod crc_t10dif nfs lockd nfs _acl sunrpc fuse loop dm_mod qeth_l3 ipv6 zfcp qeth scsi_transport_fc qdio scsi_tgt scsi_mod chsc_sch ccwgroup dasd_eckd_mod dasdm od ext3 mbcache jbd <4>Supported: Yes <4>CPU: 0 Not tainted 2.6.27.13-1.1.mz13-default #1 <4>Process blast.LzS_64 (pid: 16445, task: 000000006cc02538, ksp: 000000006cb67998) <4>Krnl PSW : 0704c00180000000 00000000001399f4 (tasklet_action+0xc8/0x1d4) <4> R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 EA:3 <4>Krnl GPRS: ffffffff00000030 0000000000000002 0000000000000002 fffffffffffffffe <4> 000000000013aabe 00000000003b6a18 fffffffffffffffd 0000000000000000 <4> 00000000006705a8 000000007d0914a8 000000007d0914b0 000000007fecfd30 <4> 0000000000000000 00000000003b63e8 000000007fecfd90 000000007fecfd30 <4>Krnl Code: 00000000001399e8: b9200021 cgr %r2,%r1 <4> 00000000001399ec: a7740004 brc 7,1399f4 <4> 00000000001399f0: a7f40001 brc 15,1399f2 <4> >00000000001399f4: c0100027e8ee larl %r1,636bd0 <4> 00000000001399fa: bf1f1008 icm %r1,15,8(%r1) <4> 00000000001399fe: a7840019 brc 8,139a30 <4> 0000000000139a02: c0300027e8ef larl %r3,636be0 <4> 0000000000139a08: e3c030000004 lg %r12,0(%r3) <4>Call Trace: <4>([<0000000000139c12>] tasklet_hi_action+0x112/0x1d4) <4> [<000000000013aabe>] __do_softirq+0xde/0x1c4 <4> [<000000000010fa2e>] do_softirq+0x96/0xb0 <4> [<000000000013a8d8>] irq_exit+0x70/0xcc <4> [<000000000010d1d8>] do_extint+0xf0/0x110 <4> [<0000000000113b10>] ext_no_vtime+0x16/0x1a <4> [<000003e0000a3662>] ext3_dirty_inode+0xe6/0xe8 [ext3] <4>([<00000000001f6cf2>] __mark_inode_dirty+0x52/0x1d4) <4> [<000003e0000a44f0>] ext3_ordered_write_end+0x138/0x190 [ext3] <4> [<000000000018d5ec>] generic_perform_write+0x174/0x230 <4> [<0000000000190144>] generic_file_buffered_write+0xb4/0x194 <4> [<0000000000190864>] __generic_file_aio_write_nolock+0x418/0x454 <4> [<0000000000190ee2>] generic_file_aio_write+0x76/0xe4 <4> [<000003e0000a05c2>] ext3_file_write+0x3e/0xc8 [ext3] <4> [<00000000001cc2fe>] do_sync_write+0xd6/0x120 <4> [<00000000001ccfc8>] vfs_write+0xac/0x184 <4> [<00000000001cd218>] SyS_write+0x68/0xe0 <4> [<0000000000113402>] sysc_noemu+0x10/0x16 <4> [<0000020000043188>] 0x20000043188 <4>Last Breaking-Event-Address: <4> [<00000000001399f0>] tasklet_action+0xc4/0x1d4 <6>qdio: 0.0.c61b ZFCP on SC f67 using AI:1 QEBSM:0 PCI:1 TDD:1 SIGA: W AOP <4> <0>Kernel panic - not syncing: Fatal exception in interrupt Use tasklet_kill instead of tasklet_disbale. Since tasklet_schedule must not be called after tasklet_kill use the QDIO_IRQ_STATE_STOPPED to inidicate that a queue is going down and prevent further tasklet schedules in that case. Remove superflous tasklet_schedule from input queue setup, at that time the queues are not ready so the schedule results in a NOP. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-03-26 22:24:26 +08:00
return;
sched:
if (unlikely(q->irq_ptr->state == QDIO_IRQ_STATE_STOPPED))
return;
tasklet_schedule(&q->tasklet);
}
/* outbound tasklet */
void qdio_outbound_processing(unsigned long data)
{
struct qdio_q *q = (struct qdio_q *)data;
__qdio_outbound_processing(q);
}
void qdio_outbound_timer(unsigned long data)
{
struct qdio_q *q = (struct qdio_q *)data;
[S390] qdio: proper kill of qdio tasklets The queue tasklets were stopped with tasklet_disable. Although tasklet_disable prevents the tasklet from beeing executed it is still possible that a tasklet is scheduled on a CPU at that point. A following qdio_establish calls tasklet_init which clears the tasklet count and the tasklet state leading to the following Oops: <2>kernel BUG at kernel/softirq.c:392! <4>illegal operation: 0001 [#1] SMP <4>Modules linked in: iptable_filter ip_tables x_tables dm_round_robin dm_multipath scsi_dh sg sd_mod crc_t10dif nfs lockd nfs _acl sunrpc fuse loop dm_mod qeth_l3 ipv6 zfcp qeth scsi_transport_fc qdio scsi_tgt scsi_mod chsc_sch ccwgroup dasd_eckd_mod dasdm od ext3 mbcache jbd <4>Supported: Yes <4>CPU: 0 Not tainted 2.6.27.13-1.1.mz13-default #1 <4>Process blast.LzS_64 (pid: 16445, task: 000000006cc02538, ksp: 000000006cb67998) <4>Krnl PSW : 0704c00180000000 00000000001399f4 (tasklet_action+0xc8/0x1d4) <4> R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 EA:3 <4>Krnl GPRS: ffffffff00000030 0000000000000002 0000000000000002 fffffffffffffffe <4> 000000000013aabe 00000000003b6a18 fffffffffffffffd 0000000000000000 <4> 00000000006705a8 000000007d0914a8 000000007d0914b0 000000007fecfd30 <4> 0000000000000000 00000000003b63e8 000000007fecfd90 000000007fecfd30 <4>Krnl Code: 00000000001399e8: b9200021 cgr %r2,%r1 <4> 00000000001399ec: a7740004 brc 7,1399f4 <4> 00000000001399f0: a7f40001 brc 15,1399f2 <4> >00000000001399f4: c0100027e8ee larl %r1,636bd0 <4> 00000000001399fa: bf1f1008 icm %r1,15,8(%r1) <4> 00000000001399fe: a7840019 brc 8,139a30 <4> 0000000000139a02: c0300027e8ef larl %r3,636be0 <4> 0000000000139a08: e3c030000004 lg %r12,0(%r3) <4>Call Trace: <4>([<0000000000139c12>] tasklet_hi_action+0x112/0x1d4) <4> [<000000000013aabe>] __do_softirq+0xde/0x1c4 <4> [<000000000010fa2e>] do_softirq+0x96/0xb0 <4> [<000000000013a8d8>] irq_exit+0x70/0xcc <4> [<000000000010d1d8>] do_extint+0xf0/0x110 <4> [<0000000000113b10>] ext_no_vtime+0x16/0x1a <4> [<000003e0000a3662>] ext3_dirty_inode+0xe6/0xe8 [ext3] <4>([<00000000001f6cf2>] __mark_inode_dirty+0x52/0x1d4) <4> [<000003e0000a44f0>] ext3_ordered_write_end+0x138/0x190 [ext3] <4> [<000000000018d5ec>] generic_perform_write+0x174/0x230 <4> [<0000000000190144>] generic_file_buffered_write+0xb4/0x194 <4> [<0000000000190864>] __generic_file_aio_write_nolock+0x418/0x454 <4> [<0000000000190ee2>] generic_file_aio_write+0x76/0xe4 <4> [<000003e0000a05c2>] ext3_file_write+0x3e/0xc8 [ext3] <4> [<00000000001cc2fe>] do_sync_write+0xd6/0x120 <4> [<00000000001ccfc8>] vfs_write+0xac/0x184 <4> [<00000000001cd218>] SyS_write+0x68/0xe0 <4> [<0000000000113402>] sysc_noemu+0x10/0x16 <4> [<0000020000043188>] 0x20000043188 <4>Last Breaking-Event-Address: <4> [<00000000001399f0>] tasklet_action+0xc4/0x1d4 <6>qdio: 0.0.c61b ZFCP on SC f67 using AI:1 QEBSM:0 PCI:1 TDD:1 SIGA: W AOP <4> <0>Kernel panic - not syncing: Fatal exception in interrupt Use tasklet_kill instead of tasklet_disbale. Since tasklet_schedule must not be called after tasklet_kill use the QDIO_IRQ_STATE_STOPPED to inidicate that a queue is going down and prevent further tasklet schedules in that case. Remove superflous tasklet_schedule from input queue setup, at that time the queues are not ready so the schedule results in a NOP. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-03-26 22:24:26 +08:00
if (unlikely(q->irq_ptr->state == QDIO_IRQ_STATE_STOPPED))
return;
tasklet_schedule(&q->tasklet);
}
static inline void qdio_check_outbound_after_thinint(struct qdio_q *q)
{
struct qdio_q *out;
int i;
if (!pci_out_supported(q))
return;
for_each_output_queue(q->irq_ptr, out, i)
if (!qdio_outbound_q_done(out))
tasklet_schedule(&out->tasklet);
}
static void __tiqdio_inbound_processing(struct qdio_q *q)
{
qdio_perf_stat_inc(&perf_stats.thinint_inbound);
qdio_sync_after_thinint(q);
/*
* The interrupt could be caused by a PCI request. Check the
* PCI capable outbound queues.
*/
qdio_check_outbound_after_thinint(q);
if (!qdio_inbound_q_moved(q))
return;
qdio_kick_handler(q);
if (!qdio_inbound_q_done(q)) {
qdio_perf_stat_inc(&perf_stats.thinint_inbound_loop);
if (likely(q->irq_ptr->state != QDIO_IRQ_STATE_STOPPED))
tasklet_schedule(&q->tasklet);
}
qdio_stop_polling(q);
/*
* We need to check again to not lose initiative after
* resetting the ACK state.
*/
if (!qdio_inbound_q_done(q)) {
qdio_perf_stat_inc(&perf_stats.thinint_inbound_loop2);
if (likely(q->irq_ptr->state != QDIO_IRQ_STATE_STOPPED))
tasklet_schedule(&q->tasklet);
}
}
void tiqdio_inbound_processing(unsigned long data)
{
struct qdio_q *q = (struct qdio_q *)data;
__tiqdio_inbound_processing(q);
}
static inline void qdio_set_state(struct qdio_irq *irq_ptr,
enum qdio_irq_states state)
{
DBF_DEV_EVENT(DBF_INFO, irq_ptr, "newstate: %1d", state);
irq_ptr->state = state;
mb();
}
static void qdio_irq_check_sense(struct qdio_irq *irq_ptr, struct irb *irb)
{
if (irb->esw.esw0.erw.cons) {
DBF_ERROR("%4x sense:", irq_ptr->schid.sch_no);
DBF_ERROR_HEX(irb, 64);
DBF_ERROR_HEX(irb->ecw, 64);
}
}
/* PCI interrupt handler */
static void qdio_int_handler_pci(struct qdio_irq *irq_ptr)
{
int i;
struct qdio_q *q;
[S390] qdio: proper kill of qdio tasklets The queue tasklets were stopped with tasklet_disable. Although tasklet_disable prevents the tasklet from beeing executed it is still possible that a tasklet is scheduled on a CPU at that point. A following qdio_establish calls tasklet_init which clears the tasklet count and the tasklet state leading to the following Oops: <2>kernel BUG at kernel/softirq.c:392! <4>illegal operation: 0001 [#1] SMP <4>Modules linked in: iptable_filter ip_tables x_tables dm_round_robin dm_multipath scsi_dh sg sd_mod crc_t10dif nfs lockd nfs _acl sunrpc fuse loop dm_mod qeth_l3 ipv6 zfcp qeth scsi_transport_fc qdio scsi_tgt scsi_mod chsc_sch ccwgroup dasd_eckd_mod dasdm od ext3 mbcache jbd <4>Supported: Yes <4>CPU: 0 Not tainted 2.6.27.13-1.1.mz13-default #1 <4>Process blast.LzS_64 (pid: 16445, task: 000000006cc02538, ksp: 000000006cb67998) <4>Krnl PSW : 0704c00180000000 00000000001399f4 (tasklet_action+0xc8/0x1d4) <4> R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 EA:3 <4>Krnl GPRS: ffffffff00000030 0000000000000002 0000000000000002 fffffffffffffffe <4> 000000000013aabe 00000000003b6a18 fffffffffffffffd 0000000000000000 <4> 00000000006705a8 000000007d0914a8 000000007d0914b0 000000007fecfd30 <4> 0000000000000000 00000000003b63e8 000000007fecfd90 000000007fecfd30 <4>Krnl Code: 00000000001399e8: b9200021 cgr %r2,%r1 <4> 00000000001399ec: a7740004 brc 7,1399f4 <4> 00000000001399f0: a7f40001 brc 15,1399f2 <4> >00000000001399f4: c0100027e8ee larl %r1,636bd0 <4> 00000000001399fa: bf1f1008 icm %r1,15,8(%r1) <4> 00000000001399fe: a7840019 brc 8,139a30 <4> 0000000000139a02: c0300027e8ef larl %r3,636be0 <4> 0000000000139a08: e3c030000004 lg %r12,0(%r3) <4>Call Trace: <4>([<0000000000139c12>] tasklet_hi_action+0x112/0x1d4) <4> [<000000000013aabe>] __do_softirq+0xde/0x1c4 <4> [<000000000010fa2e>] do_softirq+0x96/0xb0 <4> [<000000000013a8d8>] irq_exit+0x70/0xcc <4> [<000000000010d1d8>] do_extint+0xf0/0x110 <4> [<0000000000113b10>] ext_no_vtime+0x16/0x1a <4> [<000003e0000a3662>] ext3_dirty_inode+0xe6/0xe8 [ext3] <4>([<00000000001f6cf2>] __mark_inode_dirty+0x52/0x1d4) <4> [<000003e0000a44f0>] ext3_ordered_write_end+0x138/0x190 [ext3] <4> [<000000000018d5ec>] generic_perform_write+0x174/0x230 <4> [<0000000000190144>] generic_file_buffered_write+0xb4/0x194 <4> [<0000000000190864>] __generic_file_aio_write_nolock+0x418/0x454 <4> [<0000000000190ee2>] generic_file_aio_write+0x76/0xe4 <4> [<000003e0000a05c2>] ext3_file_write+0x3e/0xc8 [ext3] <4> [<00000000001cc2fe>] do_sync_write+0xd6/0x120 <4> [<00000000001ccfc8>] vfs_write+0xac/0x184 <4> [<00000000001cd218>] SyS_write+0x68/0xe0 <4> [<0000000000113402>] sysc_noemu+0x10/0x16 <4> [<0000020000043188>] 0x20000043188 <4>Last Breaking-Event-Address: <4> [<00000000001399f0>] tasklet_action+0xc4/0x1d4 <6>qdio: 0.0.c61b ZFCP on SC f67 using AI:1 QEBSM:0 PCI:1 TDD:1 SIGA: W AOP <4> <0>Kernel panic - not syncing: Fatal exception in interrupt Use tasklet_kill instead of tasklet_disbale. Since tasklet_schedule must not be called after tasklet_kill use the QDIO_IRQ_STATE_STOPPED to inidicate that a queue is going down and prevent further tasklet schedules in that case. Remove superflous tasklet_schedule from input queue setup, at that time the queues are not ready so the schedule results in a NOP. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-03-26 22:24:26 +08:00
if (unlikely(irq_ptr->state == QDIO_IRQ_STATE_STOPPED))
return;
qdio_perf_stat_inc(&perf_stats.pci_int);
for_each_input_queue(irq_ptr, q, i)
tasklet_schedule(&q->tasklet);
if (!(irq_ptr->qib.ac & QIB_AC_OUTBOUND_PCI_SUPPORTED))
return;
for_each_output_queue(irq_ptr, q, i) {
if (qdio_outbound_q_done(q))
continue;
if (!siga_syncs_out_pci(q))
qdio_siga_sync_q(q);
tasklet_schedule(&q->tasklet);
}
}
static void qdio_handle_activate_check(struct ccw_device *cdev,
unsigned long intparm, int cstat, int dstat)
{
struct qdio_irq *irq_ptr = cdev->private->qdio_data;
struct qdio_q *q;
DBF_ERROR("%4x ACT CHECK", irq_ptr->schid.sch_no);
DBF_ERROR("intp :%lx", intparm);
DBF_ERROR("ds: %2x cs:%2x", dstat, cstat);
if (irq_ptr->nr_input_qs) {
q = irq_ptr->input_qs[0];
} else if (irq_ptr->nr_output_qs) {
q = irq_ptr->output_qs[0];
} else {
dump_stack();
goto no_handler;
}
q->handler(q->irq_ptr->cdev, QDIO_ERROR_ACTIVATE_CHECK_CONDITION,
0, -1, -1, irq_ptr->int_parm);
no_handler:
qdio_set_state(irq_ptr, QDIO_IRQ_STATE_STOPPED);
}
static void qdio_establish_handle_irq(struct ccw_device *cdev, int cstat,
int dstat)
{
struct qdio_irq *irq_ptr = cdev->private->qdio_data;
DBF_DEV_EVENT(DBF_INFO, irq_ptr, "qest irq");
if (cstat)
goto error;
if (dstat & ~(DEV_STAT_DEV_END | DEV_STAT_CHN_END))
goto error;
if (!(dstat & DEV_STAT_DEV_END))
goto error;
qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ESTABLISHED);
return;
error:
DBF_ERROR("%4x EQ:error", irq_ptr->schid.sch_no);
DBF_ERROR("ds: %2x cs:%2x", dstat, cstat);
qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR);
}
/* qdio interrupt handler */
void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm,
struct irb *irb)
{
struct qdio_irq *irq_ptr = cdev->private->qdio_data;
int cstat, dstat;
qdio_perf_stat_inc(&perf_stats.qdio_int);
if (!intparm || !irq_ptr) {
DBF_ERROR("qint:%4x", cdev->private->schid.sch_no);
return;
}
if (IS_ERR(irb)) {
switch (PTR_ERR(irb)) {
case -EIO:
DBF_ERROR("%4x IO error", irq_ptr->schid.sch_no);
qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR);
wake_up(&cdev->private->wait_q);
return;
default:
WARN_ON(1);
return;
}
}
qdio_irq_check_sense(irq_ptr, irb);
cstat = irb->scsw.cmd.cstat;
dstat = irb->scsw.cmd.dstat;
switch (irq_ptr->state) {
case QDIO_IRQ_STATE_INACTIVE:
qdio_establish_handle_irq(cdev, cstat, dstat);
break;
case QDIO_IRQ_STATE_CLEANUP:
qdio_set_state(irq_ptr, QDIO_IRQ_STATE_INACTIVE);
break;
case QDIO_IRQ_STATE_ESTABLISHED:
case QDIO_IRQ_STATE_ACTIVE:
if (cstat & SCHN_STAT_PCI) {
qdio_int_handler_pci(irq_ptr);
return;
}
if (cstat || dstat)
qdio_handle_activate_check(cdev, intparm, cstat,
dstat);
break;
default:
WARN_ON(1);
}
wake_up(&cdev->private->wait_q);
}
/**
* qdio_get_ssqd_desc - get qdio subchannel description
* @cdev: ccw device to get description for
* @data: where to store the ssqd
*
* Returns 0 or an error code. The results of the chsc are stored in the
* specified structure.
*/
int qdio_get_ssqd_desc(struct ccw_device *cdev,
struct qdio_ssqd_desc *data)
{
if (!cdev || !cdev->private)
return -EINVAL;
DBF_EVENT("get ssqd:%4x", cdev->private->schid.sch_no);
return qdio_setup_get_ssqd(NULL, &cdev->private->schid, data);
}
EXPORT_SYMBOL_GPL(qdio_get_ssqd_desc);
/**
* qdio_cleanup - shutdown queues and free data structures
* @cdev: associated ccw device
* @how: use halt or clear to shutdown
*
* This function calls qdio_shutdown() for @cdev with method @how.
* and qdio_free(). The qdio_free() return value is ignored since
* !irq_ptr is already checked.
*/
int qdio_cleanup(struct ccw_device *cdev, int how)
{
struct qdio_irq *irq_ptr = cdev->private->qdio_data;
int rc;
if (!irq_ptr)
return -ENODEV;
rc = qdio_shutdown(cdev, how);
qdio_free(cdev);
return rc;
}
EXPORT_SYMBOL_GPL(qdio_cleanup);
static void qdio_shutdown_queues(struct ccw_device *cdev)
{
struct qdio_irq *irq_ptr = cdev->private->qdio_data;
struct qdio_q *q;
int i;
for_each_input_queue(irq_ptr, q, i)
[S390] qdio: proper kill of qdio tasklets The queue tasklets were stopped with tasklet_disable. Although tasklet_disable prevents the tasklet from beeing executed it is still possible that a tasklet is scheduled on a CPU at that point. A following qdio_establish calls tasklet_init which clears the tasklet count and the tasklet state leading to the following Oops: <2>kernel BUG at kernel/softirq.c:392! <4>illegal operation: 0001 [#1] SMP <4>Modules linked in: iptable_filter ip_tables x_tables dm_round_robin dm_multipath scsi_dh sg sd_mod crc_t10dif nfs lockd nfs _acl sunrpc fuse loop dm_mod qeth_l3 ipv6 zfcp qeth scsi_transport_fc qdio scsi_tgt scsi_mod chsc_sch ccwgroup dasd_eckd_mod dasdm od ext3 mbcache jbd <4>Supported: Yes <4>CPU: 0 Not tainted 2.6.27.13-1.1.mz13-default #1 <4>Process blast.LzS_64 (pid: 16445, task: 000000006cc02538, ksp: 000000006cb67998) <4>Krnl PSW : 0704c00180000000 00000000001399f4 (tasklet_action+0xc8/0x1d4) <4> R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 EA:3 <4>Krnl GPRS: ffffffff00000030 0000000000000002 0000000000000002 fffffffffffffffe <4> 000000000013aabe 00000000003b6a18 fffffffffffffffd 0000000000000000 <4> 00000000006705a8 000000007d0914a8 000000007d0914b0 000000007fecfd30 <4> 0000000000000000 00000000003b63e8 000000007fecfd90 000000007fecfd30 <4>Krnl Code: 00000000001399e8: b9200021 cgr %r2,%r1 <4> 00000000001399ec: a7740004 brc 7,1399f4 <4> 00000000001399f0: a7f40001 brc 15,1399f2 <4> >00000000001399f4: c0100027e8ee larl %r1,636bd0 <4> 00000000001399fa: bf1f1008 icm %r1,15,8(%r1) <4> 00000000001399fe: a7840019 brc 8,139a30 <4> 0000000000139a02: c0300027e8ef larl %r3,636be0 <4> 0000000000139a08: e3c030000004 lg %r12,0(%r3) <4>Call Trace: <4>([<0000000000139c12>] tasklet_hi_action+0x112/0x1d4) <4> [<000000000013aabe>] __do_softirq+0xde/0x1c4 <4> [<000000000010fa2e>] do_softirq+0x96/0xb0 <4> [<000000000013a8d8>] irq_exit+0x70/0xcc <4> [<000000000010d1d8>] do_extint+0xf0/0x110 <4> [<0000000000113b10>] ext_no_vtime+0x16/0x1a <4> [<000003e0000a3662>] ext3_dirty_inode+0xe6/0xe8 [ext3] <4>([<00000000001f6cf2>] __mark_inode_dirty+0x52/0x1d4) <4> [<000003e0000a44f0>] ext3_ordered_write_end+0x138/0x190 [ext3] <4> [<000000000018d5ec>] generic_perform_write+0x174/0x230 <4> [<0000000000190144>] generic_file_buffered_write+0xb4/0x194 <4> [<0000000000190864>] __generic_file_aio_write_nolock+0x418/0x454 <4> [<0000000000190ee2>] generic_file_aio_write+0x76/0xe4 <4> [<000003e0000a05c2>] ext3_file_write+0x3e/0xc8 [ext3] <4> [<00000000001cc2fe>] do_sync_write+0xd6/0x120 <4> [<00000000001ccfc8>] vfs_write+0xac/0x184 <4> [<00000000001cd218>] SyS_write+0x68/0xe0 <4> [<0000000000113402>] sysc_noemu+0x10/0x16 <4> [<0000020000043188>] 0x20000043188 <4>Last Breaking-Event-Address: <4> [<00000000001399f0>] tasklet_action+0xc4/0x1d4 <6>qdio: 0.0.c61b ZFCP on SC f67 using AI:1 QEBSM:0 PCI:1 TDD:1 SIGA: W AOP <4> <0>Kernel panic - not syncing: Fatal exception in interrupt Use tasklet_kill instead of tasklet_disbale. Since tasklet_schedule must not be called after tasklet_kill use the QDIO_IRQ_STATE_STOPPED to inidicate that a queue is going down and prevent further tasklet schedules in that case. Remove superflous tasklet_schedule from input queue setup, at that time the queues are not ready so the schedule results in a NOP. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-03-26 22:24:26 +08:00
tasklet_kill(&q->tasklet);
for_each_output_queue(irq_ptr, q, i) {
del_timer(&q->u.out.timer);
[S390] qdio: proper kill of qdio tasklets The queue tasklets were stopped with tasklet_disable. Although tasklet_disable prevents the tasklet from beeing executed it is still possible that a tasklet is scheduled on a CPU at that point. A following qdio_establish calls tasklet_init which clears the tasklet count and the tasklet state leading to the following Oops: <2>kernel BUG at kernel/softirq.c:392! <4>illegal operation: 0001 [#1] SMP <4>Modules linked in: iptable_filter ip_tables x_tables dm_round_robin dm_multipath scsi_dh sg sd_mod crc_t10dif nfs lockd nfs _acl sunrpc fuse loop dm_mod qeth_l3 ipv6 zfcp qeth scsi_transport_fc qdio scsi_tgt scsi_mod chsc_sch ccwgroup dasd_eckd_mod dasdm od ext3 mbcache jbd <4>Supported: Yes <4>CPU: 0 Not tainted 2.6.27.13-1.1.mz13-default #1 <4>Process blast.LzS_64 (pid: 16445, task: 000000006cc02538, ksp: 000000006cb67998) <4>Krnl PSW : 0704c00180000000 00000000001399f4 (tasklet_action+0xc8/0x1d4) <4> R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 EA:3 <4>Krnl GPRS: ffffffff00000030 0000000000000002 0000000000000002 fffffffffffffffe <4> 000000000013aabe 00000000003b6a18 fffffffffffffffd 0000000000000000 <4> 00000000006705a8 000000007d0914a8 000000007d0914b0 000000007fecfd30 <4> 0000000000000000 00000000003b63e8 000000007fecfd90 000000007fecfd30 <4>Krnl Code: 00000000001399e8: b9200021 cgr %r2,%r1 <4> 00000000001399ec: a7740004 brc 7,1399f4 <4> 00000000001399f0: a7f40001 brc 15,1399f2 <4> >00000000001399f4: c0100027e8ee larl %r1,636bd0 <4> 00000000001399fa: bf1f1008 icm %r1,15,8(%r1) <4> 00000000001399fe: a7840019 brc 8,139a30 <4> 0000000000139a02: c0300027e8ef larl %r3,636be0 <4> 0000000000139a08: e3c030000004 lg %r12,0(%r3) <4>Call Trace: <4>([<0000000000139c12>] tasklet_hi_action+0x112/0x1d4) <4> [<000000000013aabe>] __do_softirq+0xde/0x1c4 <4> [<000000000010fa2e>] do_softirq+0x96/0xb0 <4> [<000000000013a8d8>] irq_exit+0x70/0xcc <4> [<000000000010d1d8>] do_extint+0xf0/0x110 <4> [<0000000000113b10>] ext_no_vtime+0x16/0x1a <4> [<000003e0000a3662>] ext3_dirty_inode+0xe6/0xe8 [ext3] <4>([<00000000001f6cf2>] __mark_inode_dirty+0x52/0x1d4) <4> [<000003e0000a44f0>] ext3_ordered_write_end+0x138/0x190 [ext3] <4> [<000000000018d5ec>] generic_perform_write+0x174/0x230 <4> [<0000000000190144>] generic_file_buffered_write+0xb4/0x194 <4> [<0000000000190864>] __generic_file_aio_write_nolock+0x418/0x454 <4> [<0000000000190ee2>] generic_file_aio_write+0x76/0xe4 <4> [<000003e0000a05c2>] ext3_file_write+0x3e/0xc8 [ext3] <4> [<00000000001cc2fe>] do_sync_write+0xd6/0x120 <4> [<00000000001ccfc8>] vfs_write+0xac/0x184 <4> [<00000000001cd218>] SyS_write+0x68/0xe0 <4> [<0000000000113402>] sysc_noemu+0x10/0x16 <4> [<0000020000043188>] 0x20000043188 <4>Last Breaking-Event-Address: <4> [<00000000001399f0>] tasklet_action+0xc4/0x1d4 <6>qdio: 0.0.c61b ZFCP on SC f67 using AI:1 QEBSM:0 PCI:1 TDD:1 SIGA: W AOP <4> <0>Kernel panic - not syncing: Fatal exception in interrupt Use tasklet_kill instead of tasklet_disbale. Since tasklet_schedule must not be called after tasklet_kill use the QDIO_IRQ_STATE_STOPPED to inidicate that a queue is going down and prevent further tasklet schedules in that case. Remove superflous tasklet_schedule from input queue setup, at that time the queues are not ready so the schedule results in a NOP. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-03-26 22:24:26 +08:00
tasklet_kill(&q->tasklet);
}
}
/**
* qdio_shutdown - shut down a qdio subchannel
* @cdev: associated ccw device
* @how: use halt or clear to shutdown
*/
int qdio_shutdown(struct ccw_device *cdev, int how)
{
struct qdio_irq *irq_ptr = cdev->private->qdio_data;
int rc;
unsigned long flags;
if (!irq_ptr)
return -ENODEV;
BUG_ON(irqs_disabled());
DBF_EVENT("qshutdown:%4x", cdev->private->schid.sch_no);
mutex_lock(&irq_ptr->setup_mutex);
/*
* Subchannel was already shot down. We cannot prevent being called
* twice since cio may trigger a shutdown asynchronously.
*/
if (irq_ptr->state == QDIO_IRQ_STATE_INACTIVE) {
mutex_unlock(&irq_ptr->setup_mutex);
return 0;
}
[S390] qdio: proper kill of qdio tasklets The queue tasklets were stopped with tasklet_disable. Although tasklet_disable prevents the tasklet from beeing executed it is still possible that a tasklet is scheduled on a CPU at that point. A following qdio_establish calls tasklet_init which clears the tasklet count and the tasklet state leading to the following Oops: <2>kernel BUG at kernel/softirq.c:392! <4>illegal operation: 0001 [#1] SMP <4>Modules linked in: iptable_filter ip_tables x_tables dm_round_robin dm_multipath scsi_dh sg sd_mod crc_t10dif nfs lockd nfs _acl sunrpc fuse loop dm_mod qeth_l3 ipv6 zfcp qeth scsi_transport_fc qdio scsi_tgt scsi_mod chsc_sch ccwgroup dasd_eckd_mod dasdm od ext3 mbcache jbd <4>Supported: Yes <4>CPU: 0 Not tainted 2.6.27.13-1.1.mz13-default #1 <4>Process blast.LzS_64 (pid: 16445, task: 000000006cc02538, ksp: 000000006cb67998) <4>Krnl PSW : 0704c00180000000 00000000001399f4 (tasklet_action+0xc8/0x1d4) <4> R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 EA:3 <4>Krnl GPRS: ffffffff00000030 0000000000000002 0000000000000002 fffffffffffffffe <4> 000000000013aabe 00000000003b6a18 fffffffffffffffd 0000000000000000 <4> 00000000006705a8 000000007d0914a8 000000007d0914b0 000000007fecfd30 <4> 0000000000000000 00000000003b63e8 000000007fecfd90 000000007fecfd30 <4>Krnl Code: 00000000001399e8: b9200021 cgr %r2,%r1 <4> 00000000001399ec: a7740004 brc 7,1399f4 <4> 00000000001399f0: a7f40001 brc 15,1399f2 <4> >00000000001399f4: c0100027e8ee larl %r1,636bd0 <4> 00000000001399fa: bf1f1008 icm %r1,15,8(%r1) <4> 00000000001399fe: a7840019 brc 8,139a30 <4> 0000000000139a02: c0300027e8ef larl %r3,636be0 <4> 0000000000139a08: e3c030000004 lg %r12,0(%r3) <4>Call Trace: <4>([<0000000000139c12>] tasklet_hi_action+0x112/0x1d4) <4> [<000000000013aabe>] __do_softirq+0xde/0x1c4 <4> [<000000000010fa2e>] do_softirq+0x96/0xb0 <4> [<000000000013a8d8>] irq_exit+0x70/0xcc <4> [<000000000010d1d8>] do_extint+0xf0/0x110 <4> [<0000000000113b10>] ext_no_vtime+0x16/0x1a <4> [<000003e0000a3662>] ext3_dirty_inode+0xe6/0xe8 [ext3] <4>([<00000000001f6cf2>] __mark_inode_dirty+0x52/0x1d4) <4> [<000003e0000a44f0>] ext3_ordered_write_end+0x138/0x190 [ext3] <4> [<000000000018d5ec>] generic_perform_write+0x174/0x230 <4> [<0000000000190144>] generic_file_buffered_write+0xb4/0x194 <4> [<0000000000190864>] __generic_file_aio_write_nolock+0x418/0x454 <4> [<0000000000190ee2>] generic_file_aio_write+0x76/0xe4 <4> [<000003e0000a05c2>] ext3_file_write+0x3e/0xc8 [ext3] <4> [<00000000001cc2fe>] do_sync_write+0xd6/0x120 <4> [<00000000001ccfc8>] vfs_write+0xac/0x184 <4> [<00000000001cd218>] SyS_write+0x68/0xe0 <4> [<0000000000113402>] sysc_noemu+0x10/0x16 <4> [<0000020000043188>] 0x20000043188 <4>Last Breaking-Event-Address: <4> [<00000000001399f0>] tasklet_action+0xc4/0x1d4 <6>qdio: 0.0.c61b ZFCP on SC f67 using AI:1 QEBSM:0 PCI:1 TDD:1 SIGA: W AOP <4> <0>Kernel panic - not syncing: Fatal exception in interrupt Use tasklet_kill instead of tasklet_disbale. Since tasklet_schedule must not be called after tasklet_kill use the QDIO_IRQ_STATE_STOPPED to inidicate that a queue is going down and prevent further tasklet schedules in that case. Remove superflous tasklet_schedule from input queue setup, at that time the queues are not ready so the schedule results in a NOP. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-03-26 22:24:26 +08:00
/*
* Indicate that the device is going down. Scheduling the queue
* tasklets is forbidden from here on.
*/
qdio_set_state(irq_ptr, QDIO_IRQ_STATE_STOPPED);
tiqdio_remove_input_queues(irq_ptr);
qdio_shutdown_queues(cdev);
qdio_shutdown_debug_entries(irq_ptr, cdev);
/* cleanup subchannel */
spin_lock_irqsave(get_ccwdev_lock(cdev), flags);
if (how & QDIO_FLAG_CLEANUP_USING_CLEAR)
rc = ccw_device_clear(cdev, QDIO_DOING_CLEANUP);
else
/* default behaviour is halt */
rc = ccw_device_halt(cdev, QDIO_DOING_CLEANUP);
if (rc) {
DBF_ERROR("%4x SHUTD ERR", irq_ptr->schid.sch_no);
DBF_ERROR("rc:%4d", rc);
goto no_cleanup;
}
qdio_set_state(irq_ptr, QDIO_IRQ_STATE_CLEANUP);
spin_unlock_irqrestore(get_ccwdev_lock(cdev), flags);
wait_event_interruptible_timeout(cdev->private->wait_q,
irq_ptr->state == QDIO_IRQ_STATE_INACTIVE ||
irq_ptr->state == QDIO_IRQ_STATE_ERR,
10 * HZ);
spin_lock_irqsave(get_ccwdev_lock(cdev), flags);
no_cleanup:
qdio_shutdown_thinint(irq_ptr);
/* restore interrupt handler */
if ((void *)cdev->handler == (void *)qdio_int_handler)
cdev->handler = irq_ptr->orig_handler;
spin_unlock_irqrestore(get_ccwdev_lock(cdev), flags);
qdio_set_state(irq_ptr, QDIO_IRQ_STATE_INACTIVE);
mutex_unlock(&irq_ptr->setup_mutex);
if (rc)
return rc;
return 0;
}
EXPORT_SYMBOL_GPL(qdio_shutdown);
/**
* qdio_free - free data structures for a qdio subchannel
* @cdev: associated ccw device
*/
int qdio_free(struct ccw_device *cdev)
{
struct qdio_irq *irq_ptr = cdev->private->qdio_data;
if (!irq_ptr)
return -ENODEV;
DBF_EVENT("qfree:%4x", cdev->private->schid.sch_no);
mutex_lock(&irq_ptr->setup_mutex);
if (irq_ptr->debug_area != NULL) {
debug_unregister(irq_ptr->debug_area);
irq_ptr->debug_area = NULL;
}
cdev->private->qdio_data = NULL;
mutex_unlock(&irq_ptr->setup_mutex);
qdio_release_memory(irq_ptr);
return 0;
}
EXPORT_SYMBOL_GPL(qdio_free);
/**
* qdio_initialize - allocate and establish queues for a qdio subchannel
* @init_data: initialization data
*
* This function first allocates queues via qdio_allocate() and on success
* establishes them via qdio_establish().
*/
int qdio_initialize(struct qdio_initialize *init_data)
{
int rc;
rc = qdio_allocate(init_data);
if (rc)
return rc;
rc = qdio_establish(init_data);
if (rc)
qdio_free(init_data->cdev);
return rc;
}
EXPORT_SYMBOL_GPL(qdio_initialize);
/**
* qdio_allocate - allocate qdio queues and associated data
* @init_data: initialization data
*/
int qdio_allocate(struct qdio_initialize *init_data)
{
struct qdio_irq *irq_ptr;
DBF_EVENT("qallocate:%4x", init_data->cdev->private->schid.sch_no);
if ((init_data->no_input_qs && !init_data->input_handler) ||
(init_data->no_output_qs && !init_data->output_handler))
return -EINVAL;
if ((init_data->no_input_qs > QDIO_MAX_QUEUES_PER_IRQ) ||
(init_data->no_output_qs > QDIO_MAX_QUEUES_PER_IRQ))
return -EINVAL;
if ((!init_data->input_sbal_addr_array) ||
(!init_data->output_sbal_addr_array))
return -EINVAL;
/* irq_ptr must be in GFP_DMA since it contains ccw1.cda */
irq_ptr = (void *) get_zeroed_page(GFP_KERNEL | GFP_DMA);
if (!irq_ptr)
goto out_err;
mutex_init(&irq_ptr->setup_mutex);
qdio_allocate_dbf(init_data, irq_ptr);
/*
* Allocate a page for the chsc calls in qdio_establish.
* Must be pre-allocated since a zfcp recovery will call
* qdio_establish. In case of low memory and swap on a zfcp disk
* we may not be able to allocate memory otherwise.
*/
irq_ptr->chsc_page = get_zeroed_page(GFP_KERNEL);
if (!irq_ptr->chsc_page)
goto out_rel;
/* qdr is used in ccw1.cda which is u32 */
irq_ptr->qdr = (struct qdr *) get_zeroed_page(GFP_KERNEL | GFP_DMA);
if (!irq_ptr->qdr)
goto out_rel;
WARN_ON((unsigned long)irq_ptr->qdr & 0xfff);
if (qdio_allocate_qs(irq_ptr, init_data->no_input_qs,
init_data->no_output_qs))
goto out_rel;
init_data->cdev->private->qdio_data = irq_ptr;
qdio_set_state(irq_ptr, QDIO_IRQ_STATE_INACTIVE);
return 0;
out_rel:
qdio_release_memory(irq_ptr);
out_err:
return -ENOMEM;
}
EXPORT_SYMBOL_GPL(qdio_allocate);
/**
* qdio_establish - establish queues on a qdio subchannel
* @init_data: initialization data
*/
int qdio_establish(struct qdio_initialize *init_data)
{
struct qdio_irq *irq_ptr;
struct ccw_device *cdev = init_data->cdev;
unsigned long saveflags;
int rc;
DBF_EVENT("qestablish:%4x", cdev->private->schid.sch_no);
irq_ptr = cdev->private->qdio_data;
if (!irq_ptr)
return -ENODEV;
if (cdev->private->state != DEV_STATE_ONLINE)
return -EINVAL;
mutex_lock(&irq_ptr->setup_mutex);
qdio_setup_irq(init_data);
rc = qdio_establish_thinint(irq_ptr);
if (rc) {
mutex_unlock(&irq_ptr->setup_mutex);
qdio_shutdown(cdev, QDIO_FLAG_CLEANUP_USING_CLEAR);
return rc;
}
/* establish q */
irq_ptr->ccw.cmd_code = irq_ptr->equeue.cmd;
irq_ptr->ccw.flags = CCW_FLAG_SLI;
irq_ptr->ccw.count = irq_ptr->equeue.count;
irq_ptr->ccw.cda = (u32)((addr_t)irq_ptr->qdr);
spin_lock_irqsave(get_ccwdev_lock(cdev), saveflags);
ccw_device_set_options_mask(cdev, 0);
rc = ccw_device_start(cdev, &irq_ptr->ccw, QDIO_DOING_ESTABLISH, 0, 0);
if (rc) {
DBF_ERROR("%4x est IO ERR", irq_ptr->schid.sch_no);
DBF_ERROR("rc:%4x", rc);
}
spin_unlock_irqrestore(get_ccwdev_lock(cdev), saveflags);
if (rc) {
mutex_unlock(&irq_ptr->setup_mutex);
qdio_shutdown(cdev, QDIO_FLAG_CLEANUP_USING_CLEAR);
return rc;
}
wait_event_interruptible_timeout(cdev->private->wait_q,
irq_ptr->state == QDIO_IRQ_STATE_ESTABLISHED ||
irq_ptr->state == QDIO_IRQ_STATE_ERR, HZ);
if (irq_ptr->state != QDIO_IRQ_STATE_ESTABLISHED) {
mutex_unlock(&irq_ptr->setup_mutex);
qdio_shutdown(cdev, QDIO_FLAG_CLEANUP_USING_CLEAR);
return -EIO;
}
qdio_setup_ssqd_info(irq_ptr);
DBF_EVENT("qDmmwc:%2x", irq_ptr->ssqd_desc.mmwc);
DBF_EVENT("qib ac:%4x", irq_ptr->qib.ac);
/* qebsm is now setup if available, initialize buffer states */
qdio_init_buf_states(irq_ptr);
mutex_unlock(&irq_ptr->setup_mutex);
qdio_print_subchannel_info(irq_ptr, cdev);
qdio_setup_debug_entries(irq_ptr, cdev);
return 0;
}
EXPORT_SYMBOL_GPL(qdio_establish);
/**
* qdio_activate - activate queues on a qdio subchannel
* @cdev: associated cdev
*/
int qdio_activate(struct ccw_device *cdev)
{
struct qdio_irq *irq_ptr;
int rc;
unsigned long saveflags;
DBF_EVENT("qactivate:%4x", cdev->private->schid.sch_no);
irq_ptr = cdev->private->qdio_data;
if (!irq_ptr)
return -ENODEV;
if (cdev->private->state != DEV_STATE_ONLINE)
return -EINVAL;
mutex_lock(&irq_ptr->setup_mutex);
if (irq_ptr->state == QDIO_IRQ_STATE_INACTIVE) {
rc = -EBUSY;
goto out;
}
irq_ptr->ccw.cmd_code = irq_ptr->aqueue.cmd;
irq_ptr->ccw.flags = CCW_FLAG_SLI;
irq_ptr->ccw.count = irq_ptr->aqueue.count;
irq_ptr->ccw.cda = 0;
spin_lock_irqsave(get_ccwdev_lock(cdev), saveflags);
ccw_device_set_options(cdev, CCWDEV_REPORT_ALL);
rc = ccw_device_start(cdev, &irq_ptr->ccw, QDIO_DOING_ACTIVATE,
0, DOIO_DENY_PREFETCH);
if (rc) {
DBF_ERROR("%4x act IO ERR", irq_ptr->schid.sch_no);
DBF_ERROR("rc:%4x", rc);
}
spin_unlock_irqrestore(get_ccwdev_lock(cdev), saveflags);
if (rc)
goto out;
if (is_thinint_irq(irq_ptr))
tiqdio_add_input_queues(irq_ptr);
/* wait for subchannel to become active */
msleep(5);
switch (irq_ptr->state) {
case QDIO_IRQ_STATE_STOPPED:
case QDIO_IRQ_STATE_ERR:
rc = -EIO;
break;
default:
qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ACTIVE);
rc = 0;
}
out:
mutex_unlock(&irq_ptr->setup_mutex);
return rc;
}
EXPORT_SYMBOL_GPL(qdio_activate);
static inline int buf_in_between(int bufnr, int start, int count)
{
int end = add_buf(start, count);
if (end > start) {
if (bufnr >= start && bufnr < end)
return 1;
else
return 0;
}
/* wrap-around case */
if ((bufnr >= start && bufnr <= QDIO_MAX_BUFFERS_PER_Q) ||
(bufnr < end))
return 1;
else
return 0;
}
/**
* handle_inbound - reset processed input buffers
* @q: queue containing the buffers
* @callflags: flags
* @bufnr: first buffer to process
* @count: how many buffers are emptied
*/
static int handle_inbound(struct qdio_q *q, unsigned int callflags,
int bufnr, int count)
{
int used, diff;
if (!q->u.in.polling)
goto set;
/* protect against stop polling setting an ACK for an emptied slsb */
if (count == QDIO_MAX_BUFFERS_PER_Q) {
/* overwriting everything, just delete polling status */
q->u.in.polling = 0;
q->u.in.ack_count = 0;
goto set;
} else if (buf_in_between(q->u.in.ack_start, bufnr, count)) {
if (is_qebsm(q)) {
/* partial overwrite, just update ack_start */
diff = add_buf(bufnr, count);
diff = sub_buf(diff, q->u.in.ack_start);
q->u.in.ack_count -= diff;
if (q->u.in.ack_count <= 0) {
q->u.in.polling = 0;
q->u.in.ack_count = 0;
goto set;
}
q->u.in.ack_start = add_buf(q->u.in.ack_start, diff);
}
else
/* the only ACK will be deleted, so stop polling */
q->u.in.polling = 0;
}
set:
count = set_buf_states(q, bufnr, SLSB_CU_INPUT_EMPTY, count);
used = atomic_add_return(count, &q->nr_buf_used) - count;
BUG_ON(used + count > QDIO_MAX_BUFFERS_PER_Q);
/* no need to signal as long as the adapter had free buffers */
if (used)
return 0;
if (need_siga_in(q))
return qdio_siga_input(q);
return 0;
}
/**
* handle_outbound - process filled outbound buffers
* @q: queue containing the buffers
* @callflags: flags
* @bufnr: first buffer to process
* @count: how many buffers are filled
*/
static int handle_outbound(struct qdio_q *q, unsigned int callflags,
int bufnr, int count)
{
unsigned char state;
int used, rc = 0;
qdio_perf_stat_inc(&perf_stats.outbound_handler);
count = set_buf_states(q, bufnr, SLSB_CU_OUTPUT_PRIMED, count);
used = atomic_add_return(count, &q->nr_buf_used);
BUG_ON(used > QDIO_MAX_BUFFERS_PER_Q);
if (callflags & QDIO_FLAG_PCI_OUT)
q->u.out.pci_out_enabled = 1;
else
q->u.out.pci_out_enabled = 0;
if (queue_type(q) == QDIO_IQDIO_QFMT) {
if (multicast_outbound(q))
rc = qdio_kick_outbound_q(q);
else
if ((q->irq_ptr->ssqd_desc.mmwc > 1) &&
(count > 1) &&
(count <= q->irq_ptr->ssqd_desc.mmwc)) {
/* exploit enhanced SIGA */
q->u.out.use_enh_siga = 1;
rc = qdio_kick_outbound_q(q);
} else {
/*
* One siga-w per buffer required for unicast
* HiperSockets.
*/
q->u.out.use_enh_siga = 0;
while (count--) {
rc = qdio_kick_outbound_q(q);
if (rc)
goto out;
}
}
goto out;
}
if (need_siga_sync(q)) {
qdio_siga_sync_q(q);
goto out;
}
/* try to fast requeue buffers */
get_buf_state(q, prev_buf(bufnr), &state, 0);
if (state != SLSB_CU_OUTPUT_PRIMED)
rc = qdio_kick_outbound_q(q);
else {
DBF_DEV_EVENT(DBF_INFO, q->irq_ptr, "fast-req");
qdio_perf_stat_inc(&perf_stats.fast_requeue);
}
out:
tasklet_schedule(&q->tasklet);
return rc;
}
/**
* do_QDIO - process input or output buffers
* @cdev: associated ccw_device for the qdio subchannel
* @callflags: input or output and special flags from the program
* @q_nr: queue number
* @bufnr: buffer number
* @count: how many buffers to process
*/
int do_QDIO(struct ccw_device *cdev, unsigned int callflags,
int q_nr, int bufnr, int count)
{
struct qdio_irq *irq_ptr;
if ((bufnr > QDIO_MAX_BUFFERS_PER_Q) ||
(count > QDIO_MAX_BUFFERS_PER_Q) ||
(q_nr >= QDIO_MAX_QUEUES_PER_IRQ))
return -EINVAL;
if (!count)
return 0;
irq_ptr = cdev->private->qdio_data;
if (!irq_ptr)
return -ENODEV;
if (callflags & QDIO_FLAG_SYNC_INPUT)
DBF_DEV_EVENT(DBF_INFO, irq_ptr, "doQDIO input");
else
DBF_DEV_EVENT(DBF_INFO, irq_ptr, "doQDIO output");
DBF_DEV_EVENT(DBF_INFO, irq_ptr, "q:%1d flag:%4x", q_nr, callflags);
DBF_DEV_EVENT(DBF_INFO, irq_ptr, "buf:%2d cnt:%3d", bufnr, count);
if (irq_ptr->state != QDIO_IRQ_STATE_ACTIVE)
return -EBUSY;
if (callflags & QDIO_FLAG_SYNC_INPUT)
return handle_inbound(irq_ptr->input_qs[q_nr],
callflags, bufnr, count);
else if (callflags & QDIO_FLAG_SYNC_OUTPUT)
return handle_outbound(irq_ptr->output_qs[q_nr],
callflags, bufnr, count);
return -EINVAL;
}
EXPORT_SYMBOL_GPL(do_QDIO);
static int __init init_QDIO(void)
{
int rc;
rc = qdio_setup_init();
if (rc)
return rc;
rc = tiqdio_allocate_memory();
if (rc)
goto out_cache;
rc = qdio_debug_init();
if (rc)
goto out_ti;
rc = qdio_setup_perf_stats();
if (rc)
goto out_debug;
rc = tiqdio_register_thinints();
if (rc)
goto out_perf;
return 0;
out_perf:
qdio_remove_perf_stats();
out_debug:
qdio_debug_exit();
out_ti:
tiqdio_free_memory();
out_cache:
qdio_setup_exit();
return rc;
}
static void __exit exit_QDIO(void)
{
tiqdio_unregister_thinints();
tiqdio_free_memory();
qdio_remove_perf_stats();
qdio_debug_exit();
qdio_setup_exit();
}
module_init(init_QDIO);
module_exit(exit_QDIO);