OpenCloudOS-Kernel/drivers/phy/tegra/xusb-tegra186.c

1074 lines
28 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2016-2019, NVIDIA CORPORATION. All rights reserved.
*/
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/phy/phy.h>
#include <linux/regulator/consumer.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/slab.h>
#include <soc/tegra/fuse.h>
#include "xusb.h"
/* FUSE USB_CALIB registers */
#define HS_CURR_LEVEL_PADX_SHIFT(x) ((x) ? (11 + (x - 1) * 6) : 0)
#define HS_CURR_LEVEL_PAD_MASK 0x3f
#define HS_TERM_RANGE_ADJ_SHIFT 7
#define HS_TERM_RANGE_ADJ_MASK 0xf
#define HS_SQUELCH_SHIFT 29
#define HS_SQUELCH_MASK 0x7
#define RPD_CTRL_SHIFT 0
#define RPD_CTRL_MASK 0x1f
/* XUSB PADCTL registers */
#define XUSB_PADCTL_USB2_PAD_MUX 0x4
#define USB2_PORT_SHIFT(x) ((x) * 2)
#define USB2_PORT_MASK 0x3
#define PORT_XUSB 1
#define HSIC_PORT_SHIFT(x) ((x) + 20)
#define HSIC_PORT_MASK 0x1
#define PORT_HSIC 0
#define XUSB_PADCTL_USB2_PORT_CAP 0x8
#define XUSB_PADCTL_SS_PORT_CAP 0xc
#define PORTX_CAP_SHIFT(x) ((x) * 4)
#define PORT_CAP_MASK 0x3
#define PORT_CAP_DISABLED 0x0
#define PORT_CAP_HOST 0x1
#define PORT_CAP_DEVICE 0x2
#define PORT_CAP_OTG 0x3
#define XUSB_PADCTL_ELPG_PROGRAM 0x20
#define USB2_PORT_WAKE_INTERRUPT_ENABLE(x) BIT(x)
#define USB2_PORT_WAKEUP_EVENT(x) BIT((x) + 7)
#define SS_PORT_WAKE_INTERRUPT_ENABLE(x) BIT((x) + 14)
#define SS_PORT_WAKEUP_EVENT(x) BIT((x) + 21)
#define USB2_HSIC_PORT_WAKE_INTERRUPT_ENABLE(x) BIT((x) + 28)
#define USB2_HSIC_PORT_WAKEUP_EVENT(x) BIT((x) + 30)
#define ALL_WAKE_EVENTS \
(USB2_PORT_WAKEUP_EVENT(0) | USB2_PORT_WAKEUP_EVENT(1) | \
USB2_PORT_WAKEUP_EVENT(2) | SS_PORT_WAKEUP_EVENT(0) | \
SS_PORT_WAKEUP_EVENT(1) | SS_PORT_WAKEUP_EVENT(2) | \
USB2_HSIC_PORT_WAKEUP_EVENT(0))
#define XUSB_PADCTL_ELPG_PROGRAM_1 0x24
#define SSPX_ELPG_CLAMP_EN(x) BIT(0 + (x) * 3)
#define SSPX_ELPG_CLAMP_EN_EARLY(x) BIT(1 + (x) * 3)
#define SSPX_ELPG_VCORE_DOWN(x) BIT(2 + (x) * 3)
#define XUSB_PADCTL_SS_PORT_CFG 0x2c
#define PORTX_SPEED_SUPPORT_SHIFT(x) ((x) * 4)
#define PORTX_SPEED_SUPPORT_MASK (0x3)
#define PORT_SPEED_SUPPORT_GEN1 (0x0)
#define XUSB_PADCTL_USB2_OTG_PADX_CTL0(x) (0x88 + (x) * 0x40)
#define HS_CURR_LEVEL(x) ((x) & 0x3f)
#define TERM_SEL BIT(25)
#define USB2_OTG_PD BIT(26)
#define USB2_OTG_PD2 BIT(27)
#define USB2_OTG_PD2_OVRD_EN BIT(28)
#define USB2_OTG_PD_ZI BIT(29)
#define XUSB_PADCTL_USB2_OTG_PADX_CTL1(x) (0x8c + (x) * 0x40)
#define USB2_OTG_PD_DR BIT(2)
#define TERM_RANGE_ADJ(x) (((x) & 0xf) << 3)
#define RPD_CTRL(x) (((x) & 0x1f) << 26)
#define XUSB_PADCTL_USB2_BIAS_PAD_CTL0 0x284
#define BIAS_PAD_PD BIT(11)
#define HS_SQUELCH_LEVEL(x) (((x) & 0x7) << 0)
#define XUSB_PADCTL_USB2_BIAS_PAD_CTL1 0x288
#define USB2_TRK_START_TIMER(x) (((x) & 0x7f) << 12)
#define USB2_TRK_DONE_RESET_TIMER(x) (((x) & 0x7f) << 19)
#define USB2_PD_TRK BIT(26)
#define XUSB_PADCTL_HSIC_PADX_CTL0(x) (0x300 + (x) * 0x20)
#define HSIC_PD_TX_DATA0 BIT(1)
#define HSIC_PD_TX_STROBE BIT(3)
#define HSIC_PD_RX_DATA0 BIT(4)
#define HSIC_PD_RX_STROBE BIT(6)
#define HSIC_PD_ZI_DATA0 BIT(7)
#define HSIC_PD_ZI_STROBE BIT(9)
#define HSIC_RPD_DATA0 BIT(13)
#define HSIC_RPD_STROBE BIT(15)
#define HSIC_RPU_DATA0 BIT(16)
#define HSIC_RPU_STROBE BIT(18)
#define XUSB_PADCTL_HSIC_PAD_TRK_CTL0 0x340
#define HSIC_TRK_START_TIMER(x) (((x) & 0x7f) << 5)
#define HSIC_TRK_DONE_RESET_TIMER(x) (((x) & 0x7f) << 12)
#define HSIC_PD_TRK BIT(19)
#define USB2_VBUS_ID 0x360
#define VBUS_OVERRIDE BIT(14)
#define ID_OVERRIDE(x) (((x) & 0xf) << 18)
#define ID_OVERRIDE_FLOATING ID_OVERRIDE(8)
#define ID_OVERRIDE_GROUNDED ID_OVERRIDE(0)
#define TEGRA186_LANE(_name, _offset, _shift, _mask, _type) \
{ \
.name = _name, \
.offset = _offset, \
.shift = _shift, \
.mask = _mask, \
.num_funcs = ARRAY_SIZE(tegra186_##_type##_functions), \
.funcs = tegra186_##_type##_functions, \
}
struct tegra_xusb_fuse_calibration {
u32 *hs_curr_level;
u32 hs_squelch;
u32 hs_term_range_adj;
u32 rpd_ctrl;
};
struct tegra186_xusb_padctl {
struct tegra_xusb_padctl base;
struct tegra_xusb_fuse_calibration calib;
/* UTMI bias and tracking */
struct clk *usb2_trk_clk;
unsigned int bias_pad_enable;
};
static inline struct tegra186_xusb_padctl *
to_tegra186_xusb_padctl(struct tegra_xusb_padctl *padctl)
{
return container_of(padctl, struct tegra186_xusb_padctl, base);
}
/* USB 2.0 UTMI PHY support */
static struct tegra_xusb_lane *
tegra186_usb2_lane_probe(struct tegra_xusb_pad *pad, struct device_node *np,
unsigned int index)
{
struct tegra_xusb_usb2_lane *usb2;
int err;
usb2 = kzalloc(sizeof(*usb2), GFP_KERNEL);
if (!usb2)
return ERR_PTR(-ENOMEM);
INIT_LIST_HEAD(&usb2->base.list);
usb2->base.soc = &pad->soc->lanes[index];
usb2->base.index = index;
usb2->base.pad = pad;
usb2->base.np = np;
err = tegra_xusb_lane_parse_dt(&usb2->base, np);
if (err < 0) {
kfree(usb2);
return ERR_PTR(err);
}
return &usb2->base;
}
static void tegra186_usb2_lane_remove(struct tegra_xusb_lane *lane)
{
struct tegra_xusb_usb2_lane *usb2 = to_usb2_lane(lane);
kfree(usb2);
}
static const struct tegra_xusb_lane_ops tegra186_usb2_lane_ops = {
.probe = tegra186_usb2_lane_probe,
.remove = tegra186_usb2_lane_remove,
};
static void tegra186_utmi_bias_pad_power_on(struct tegra_xusb_padctl *padctl)
{
struct tegra186_xusb_padctl *priv = to_tegra186_xusb_padctl(padctl);
struct device *dev = padctl->dev;
u32 value;
int err;
mutex_lock(&padctl->lock);
if (priv->bias_pad_enable++ > 0) {
mutex_unlock(&padctl->lock);
return;
}
err = clk_prepare_enable(priv->usb2_trk_clk);
if (err < 0)
dev_warn(dev, "failed to enable USB2 trk clock: %d\n", err);
value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
value &= ~USB2_TRK_START_TIMER(~0);
value |= USB2_TRK_START_TIMER(0x1e);
value &= ~USB2_TRK_DONE_RESET_TIMER(~0);
value |= USB2_TRK_DONE_RESET_TIMER(0xa);
padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
value &= ~BIAS_PAD_PD;
value &= ~HS_SQUELCH_LEVEL(~0);
value |= HS_SQUELCH_LEVEL(priv->calib.hs_squelch);
padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
udelay(1);
value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
value &= ~USB2_PD_TRK;
padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
mutex_unlock(&padctl->lock);
}
static void tegra186_utmi_bias_pad_power_off(struct tegra_xusb_padctl *padctl)
{
struct tegra186_xusb_padctl *priv = to_tegra186_xusb_padctl(padctl);
u32 value;
mutex_lock(&padctl->lock);
if (WARN_ON(priv->bias_pad_enable == 0)) {
mutex_unlock(&padctl->lock);
return;
}
if (--priv->bias_pad_enable > 0) {
mutex_unlock(&padctl->lock);
return;
}
value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
value |= USB2_PD_TRK;
padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
clk_disable_unprepare(priv->usb2_trk_clk);
mutex_unlock(&padctl->lock);
}
static void tegra_phy_xusb_utmi_pad_power_on(struct phy *phy)
{
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
struct tegra_xusb_usb2_port *port;
struct device *dev = padctl->dev;
unsigned int index = lane->index;
u32 value;
if (!phy)
return;
port = tegra_xusb_find_usb2_port(padctl, index);
if (!port) {
dev_err(dev, "no port found for USB2 lane %u\n", index);
return;
}
tegra186_utmi_bias_pad_power_on(padctl);
udelay(2);
value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
value &= ~USB2_OTG_PD;
padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
value &= ~USB2_OTG_PD_DR;
padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
}
static void tegra_phy_xusb_utmi_pad_power_down(struct phy *phy)
{
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
unsigned int index = lane->index;
u32 value;
if (!phy)
return;
value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
value |= USB2_OTG_PD;
padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
value |= USB2_OTG_PD_DR;
padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
udelay(2);
tegra186_utmi_bias_pad_power_off(padctl);
}
static int tegra186_xusb_padctl_vbus_override(struct tegra_xusb_padctl *padctl,
bool status)
{
u32 value;
dev_dbg(padctl->dev, "%s vbus override\n", status ? "set" : "clear");
value = padctl_readl(padctl, USB2_VBUS_ID);
if (status) {
value |= VBUS_OVERRIDE;
value &= ~ID_OVERRIDE(~0);
value |= ID_OVERRIDE_FLOATING;
} else {
value &= ~VBUS_OVERRIDE;
}
padctl_writel(padctl, value, USB2_VBUS_ID);
return 0;
}
static int tegra186_xusb_padctl_id_override(struct tegra_xusb_padctl *padctl,
bool status)
{
u32 value;
dev_dbg(padctl->dev, "%s id override\n", status ? "set" : "clear");
value = padctl_readl(padctl, USB2_VBUS_ID);
if (status) {
if (value & VBUS_OVERRIDE) {
value &= ~VBUS_OVERRIDE;
padctl_writel(padctl, value, USB2_VBUS_ID);
usleep_range(1000, 2000);
value = padctl_readl(padctl, USB2_VBUS_ID);
}
value &= ~ID_OVERRIDE(~0);
value |= ID_OVERRIDE_GROUNDED;
} else {
value &= ~ID_OVERRIDE(~0);
value |= ID_OVERRIDE_FLOATING;
}
padctl_writel(padctl, value, USB2_VBUS_ID);
return 0;
}
static int tegra186_utmi_phy_set_mode(struct phy *phy, enum phy_mode mode,
int submode)
{
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
struct tegra_xusb_usb2_port *port = tegra_xusb_find_usb2_port(padctl,
lane->index);
int err = 0;
mutex_lock(&padctl->lock);
dev_dbg(&port->base.dev, "%s: mode %d", __func__, mode);
if (mode == PHY_MODE_USB_OTG) {
if (submode == USB_ROLE_HOST) {
tegra186_xusb_padctl_id_override(padctl, true);
err = regulator_enable(port->supply);
} else if (submode == USB_ROLE_DEVICE) {
tegra186_xusb_padctl_vbus_override(padctl, true);
} else if (submode == USB_ROLE_NONE) {
/*
* When port is peripheral only or role transitions to
* USB_ROLE_NONE from USB_ROLE_DEVICE, regulator is not
* enabled.
*/
if (regulator_is_enabled(port->supply))
regulator_disable(port->supply);
tegra186_xusb_padctl_id_override(padctl, false);
tegra186_xusb_padctl_vbus_override(padctl, false);
}
}
mutex_unlock(&padctl->lock);
return err;
}
static int tegra186_utmi_phy_power_on(struct phy *phy)
{
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
struct tegra_xusb_usb2_lane *usb2 = to_usb2_lane(lane);
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
struct tegra186_xusb_padctl *priv = to_tegra186_xusb_padctl(padctl);
struct tegra_xusb_usb2_port *port;
unsigned int index = lane->index;
struct device *dev = padctl->dev;
u32 value;
port = tegra_xusb_find_usb2_port(padctl, index);
if (!port) {
dev_err(dev, "no port found for USB2 lane %u\n", index);
return -ENODEV;
}
value = padctl_readl(padctl, XUSB_PADCTL_USB2_PAD_MUX);
value &= ~(USB2_PORT_MASK << USB2_PORT_SHIFT(index));
value |= (PORT_XUSB << USB2_PORT_SHIFT(index));
padctl_writel(padctl, value, XUSB_PADCTL_USB2_PAD_MUX);
value = padctl_readl(padctl, XUSB_PADCTL_USB2_PORT_CAP);
value &= ~(PORT_CAP_MASK << PORTX_CAP_SHIFT(index));
if (port->mode == USB_DR_MODE_UNKNOWN)
value |= (PORT_CAP_DISABLED << PORTX_CAP_SHIFT(index));
else if (port->mode == USB_DR_MODE_PERIPHERAL)
value |= (PORT_CAP_DEVICE << PORTX_CAP_SHIFT(index));
else if (port->mode == USB_DR_MODE_HOST)
value |= (PORT_CAP_HOST << PORTX_CAP_SHIFT(index));
else if (port->mode == USB_DR_MODE_OTG)
value |= (PORT_CAP_OTG << PORTX_CAP_SHIFT(index));
padctl_writel(padctl, value, XUSB_PADCTL_USB2_PORT_CAP);
value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
value &= ~USB2_OTG_PD_ZI;
value |= TERM_SEL;
value &= ~HS_CURR_LEVEL(~0);
if (usb2->hs_curr_level_offset) {
int hs_current_level;
hs_current_level = (int)priv->calib.hs_curr_level[index] +
usb2->hs_curr_level_offset;
if (hs_current_level < 0)
hs_current_level = 0;
if (hs_current_level > 0x3f)
hs_current_level = 0x3f;
value |= HS_CURR_LEVEL(hs_current_level);
} else {
value |= HS_CURR_LEVEL(priv->calib.hs_curr_level[index]);
}
padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL0(index));
value = padctl_readl(padctl, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
value &= ~TERM_RANGE_ADJ(~0);
value |= TERM_RANGE_ADJ(priv->calib.hs_term_range_adj);
value &= ~RPD_CTRL(~0);
value |= RPD_CTRL(priv->calib.rpd_ctrl);
padctl_writel(padctl, value, XUSB_PADCTL_USB2_OTG_PADX_CTL1(index));
/* TODO: pad power saving */
tegra_phy_xusb_utmi_pad_power_on(phy);
return 0;
}
static int tegra186_utmi_phy_power_off(struct phy *phy)
{
/* TODO: pad power saving */
tegra_phy_xusb_utmi_pad_power_down(phy);
return 0;
}
static int tegra186_utmi_phy_init(struct phy *phy)
{
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
struct tegra_xusb_usb2_port *port;
unsigned int index = lane->index;
struct device *dev = padctl->dev;
int err;
port = tegra_xusb_find_usb2_port(padctl, index);
if (!port) {
dev_err(dev, "no port found for USB2 lane %u\n", index);
return -ENODEV;
}
if (port->supply && port->mode == USB_DR_MODE_HOST) {
err = regulator_enable(port->supply);
if (err) {
dev_err(dev, "failed to enable port %u VBUS: %d\n",
index, err);
return err;
}
}
return 0;
}
static int tegra186_utmi_phy_exit(struct phy *phy)
{
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
struct tegra_xusb_usb2_port *port;
unsigned int index = lane->index;
struct device *dev = padctl->dev;
int err;
port = tegra_xusb_find_usb2_port(padctl, index);
if (!port) {
dev_err(dev, "no port found for USB2 lane %u\n", index);
return -ENODEV;
}
if (port->supply && port->mode == USB_DR_MODE_HOST) {
err = regulator_disable(port->supply);
if (err) {
dev_err(dev, "failed to disable port %u VBUS: %d\n",
index, err);
return err;
}
}
return 0;
}
static const struct phy_ops utmi_phy_ops = {
.init = tegra186_utmi_phy_init,
.exit = tegra186_utmi_phy_exit,
.power_on = tegra186_utmi_phy_power_on,
.power_off = tegra186_utmi_phy_power_off,
.set_mode = tegra186_utmi_phy_set_mode,
.owner = THIS_MODULE,
};
static struct tegra_xusb_pad *
tegra186_usb2_pad_probe(struct tegra_xusb_padctl *padctl,
const struct tegra_xusb_pad_soc *soc,
struct device_node *np)
{
struct tegra186_xusb_padctl *priv = to_tegra186_xusb_padctl(padctl);
struct tegra_xusb_usb2_pad *usb2;
struct tegra_xusb_pad *pad;
int err;
usb2 = kzalloc(sizeof(*usb2), GFP_KERNEL);
if (!usb2)
return ERR_PTR(-ENOMEM);
pad = &usb2->base;
pad->ops = &tegra186_usb2_lane_ops;
pad->soc = soc;
err = tegra_xusb_pad_init(pad, padctl, np);
if (err < 0) {
kfree(usb2);
goto out;
}
priv->usb2_trk_clk = devm_clk_get(&pad->dev, "trk");
if (IS_ERR(priv->usb2_trk_clk)) {
err = PTR_ERR(priv->usb2_trk_clk);
dev_dbg(&pad->dev, "failed to get usb2 trk clock: %d\n", err);
goto unregister;
}
err = tegra_xusb_pad_register(pad, &utmi_phy_ops);
if (err < 0)
goto unregister;
dev_set_drvdata(&pad->dev, pad);
return pad;
unregister:
device_unregister(&pad->dev);
out:
return ERR_PTR(err);
}
static void tegra186_usb2_pad_remove(struct tegra_xusb_pad *pad)
{
struct tegra_xusb_usb2_pad *usb2 = to_usb2_pad(pad);
kfree(usb2);
}
static const struct tegra_xusb_pad_ops tegra186_usb2_pad_ops = {
.probe = tegra186_usb2_pad_probe,
.remove = tegra186_usb2_pad_remove,
};
static const char * const tegra186_usb2_functions[] = {
"xusb",
};
static int tegra186_usb2_port_enable(struct tegra_xusb_port *port)
{
return 0;
}
static void tegra186_usb2_port_disable(struct tegra_xusb_port *port)
{
}
static struct tegra_xusb_lane *
tegra186_usb2_port_map(struct tegra_xusb_port *port)
{
return tegra_xusb_find_lane(port->padctl, "usb2", port->index);
}
static const struct tegra_xusb_port_ops tegra186_usb2_port_ops = {
phy: tegra: Don't use device-managed API to allocate ports The device-managed allocation API doesn't work well with the life-cycle of device objects. Since ports have device objects allocated within, it can lead to situations where these devices need to stay around until after their parent pad controller has been unbound from its driver. The device-managed memory allocated for the port objects will, however, get freed when the pad controller unbinds from the driver. This can cause use-after-free errors down the road. Note that the device is deleted as part of the driver unbind operation, so there isn't much that can be done with it after that point, but the memory still needs to stay around to ensure none of the references are invalidated. One situation where this arises is when a VBUS supply is associated with a USB 2 or 3 port. When that supply is released using regulator_put() an SRCU call will queue the release of the device link connecting the port and the regulator after a grace period. This means that the regulator is going to keep on to the last reference of the port device even after the pad controller driver was unbound (which is when the memory backing the port device is freed). Fix this by allocating port objects using non-device-managed memory. Add release callbacks for these objects so that their memory gets freed when the last reference goes away. This decouples the port devices' lifetime from the "active" lifetime of the pad controller (i.e. the time during which the pad controller driver owns the device). Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-19 18:52:13 +08:00
.release = tegra_xusb_usb2_port_release,
.remove = tegra_xusb_usb2_port_remove,
.enable = tegra186_usb2_port_enable,
.disable = tegra186_usb2_port_disable,
.map = tegra186_usb2_port_map,
};
/* SuperSpeed PHY support */
static struct tegra_xusb_lane *
tegra186_usb3_lane_probe(struct tegra_xusb_pad *pad, struct device_node *np,
unsigned int index)
{
struct tegra_xusb_usb3_lane *usb3;
int err;
usb3 = kzalloc(sizeof(*usb3), GFP_KERNEL);
if (!usb3)
return ERR_PTR(-ENOMEM);
INIT_LIST_HEAD(&usb3->base.list);
usb3->base.soc = &pad->soc->lanes[index];
usb3->base.index = index;
usb3->base.pad = pad;
usb3->base.np = np;
err = tegra_xusb_lane_parse_dt(&usb3->base, np);
if (err < 0) {
kfree(usb3);
return ERR_PTR(err);
}
return &usb3->base;
}
static void tegra186_usb3_lane_remove(struct tegra_xusb_lane *lane)
{
struct tegra_xusb_usb3_lane *usb3 = to_usb3_lane(lane);
kfree(usb3);
}
static const struct tegra_xusb_lane_ops tegra186_usb3_lane_ops = {
.probe = tegra186_usb3_lane_probe,
.remove = tegra186_usb3_lane_remove,
};
static int tegra186_usb3_port_enable(struct tegra_xusb_port *port)
{
return 0;
}
static void tegra186_usb3_port_disable(struct tegra_xusb_port *port)
{
}
static struct tegra_xusb_lane *
tegra186_usb3_port_map(struct tegra_xusb_port *port)
{
return tegra_xusb_find_lane(port->padctl, "usb3", port->index);
}
static const struct tegra_xusb_port_ops tegra186_usb3_port_ops = {
phy: tegra: Don't use device-managed API to allocate ports The device-managed allocation API doesn't work well with the life-cycle of device objects. Since ports have device objects allocated within, it can lead to situations where these devices need to stay around until after their parent pad controller has been unbound from its driver. The device-managed memory allocated for the port objects will, however, get freed when the pad controller unbinds from the driver. This can cause use-after-free errors down the road. Note that the device is deleted as part of the driver unbind operation, so there isn't much that can be done with it after that point, but the memory still needs to stay around to ensure none of the references are invalidated. One situation where this arises is when a VBUS supply is associated with a USB 2 or 3 port. When that supply is released using regulator_put() an SRCU call will queue the release of the device link connecting the port and the regulator after a grace period. This means that the regulator is going to keep on to the last reference of the port device even after the pad controller driver was unbound (which is when the memory backing the port device is freed). Fix this by allocating port objects using non-device-managed memory. Add release callbacks for these objects so that their memory gets freed when the last reference goes away. This decouples the port devices' lifetime from the "active" lifetime of the pad controller (i.e. the time during which the pad controller driver owns the device). Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-03-19 18:52:13 +08:00
.release = tegra_xusb_usb3_port_release,
.remove = tegra_xusb_usb3_port_remove,
.enable = tegra186_usb3_port_enable,
.disable = tegra186_usb3_port_disable,
.map = tegra186_usb3_port_map,
};
static int tegra186_usb3_phy_power_on(struct phy *phy)
{
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
struct tegra_xusb_usb3_port *port;
struct tegra_xusb_usb2_port *usb2;
unsigned int index = lane->index;
struct device *dev = padctl->dev;
u32 value;
port = tegra_xusb_find_usb3_port(padctl, index);
if (!port) {
dev_err(dev, "no port found for USB3 lane %u\n", index);
return -ENODEV;
}
usb2 = tegra_xusb_find_usb2_port(padctl, port->port);
if (!usb2) {
dev_err(dev, "no companion port found for USB3 lane %u\n",
index);
return -ENODEV;
}
mutex_lock(&padctl->lock);
value = padctl_readl(padctl, XUSB_PADCTL_SS_PORT_CAP);
value &= ~(PORT_CAP_MASK << PORTX_CAP_SHIFT(index));
if (usb2->mode == USB_DR_MODE_UNKNOWN)
value |= (PORT_CAP_DISABLED << PORTX_CAP_SHIFT(index));
else if (usb2->mode == USB_DR_MODE_PERIPHERAL)
value |= (PORT_CAP_DEVICE << PORTX_CAP_SHIFT(index));
else if (usb2->mode == USB_DR_MODE_HOST)
value |= (PORT_CAP_HOST << PORTX_CAP_SHIFT(index));
else if (usb2->mode == USB_DR_MODE_OTG)
value |= (PORT_CAP_OTG << PORTX_CAP_SHIFT(index));
padctl_writel(padctl, value, XUSB_PADCTL_SS_PORT_CAP);
if (padctl->soc->supports_gen2 && port->disable_gen2) {
value = padctl_readl(padctl, XUSB_PADCTL_SS_PORT_CFG);
value &= ~(PORTX_SPEED_SUPPORT_MASK <<
PORTX_SPEED_SUPPORT_SHIFT(index));
value |= (PORT_SPEED_SUPPORT_GEN1 <<
PORTX_SPEED_SUPPORT_SHIFT(index));
padctl_writel(padctl, value, XUSB_PADCTL_SS_PORT_CFG);
}
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_1);
value &= ~SSPX_ELPG_VCORE_DOWN(index);
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_1);
usleep_range(100, 200);
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_1);
value &= ~SSPX_ELPG_CLAMP_EN_EARLY(index);
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_1);
usleep_range(100, 200);
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_1);
value &= ~SSPX_ELPG_CLAMP_EN(index);
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_1);
mutex_unlock(&padctl->lock);
return 0;
}
static int tegra186_usb3_phy_power_off(struct phy *phy)
{
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
struct tegra_xusb_padctl *padctl = lane->pad->padctl;
struct tegra_xusb_usb3_port *port;
unsigned int index = lane->index;
struct device *dev = padctl->dev;
u32 value;
port = tegra_xusb_find_usb3_port(padctl, index);
if (!port) {
dev_err(dev, "no port found for USB3 lane %u\n", index);
return -ENODEV;
}
mutex_lock(&padctl->lock);
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_1);
value |= SSPX_ELPG_CLAMP_EN_EARLY(index);
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_1);
usleep_range(100, 200);
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_1);
value |= SSPX_ELPG_CLAMP_EN(index);
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_1);
usleep_range(250, 350);
value = padctl_readl(padctl, XUSB_PADCTL_ELPG_PROGRAM_1);
value |= SSPX_ELPG_VCORE_DOWN(index);
padctl_writel(padctl, value, XUSB_PADCTL_ELPG_PROGRAM_1);
mutex_unlock(&padctl->lock);
return 0;
}
static int tegra186_usb3_phy_init(struct phy *phy)
{
return 0;
}
static int tegra186_usb3_phy_exit(struct phy *phy)
{
return 0;
}
static const struct phy_ops usb3_phy_ops = {
.init = tegra186_usb3_phy_init,
.exit = tegra186_usb3_phy_exit,
.power_on = tegra186_usb3_phy_power_on,
.power_off = tegra186_usb3_phy_power_off,
.owner = THIS_MODULE,
};
static struct tegra_xusb_pad *
tegra186_usb3_pad_probe(struct tegra_xusb_padctl *padctl,
const struct tegra_xusb_pad_soc *soc,
struct device_node *np)
{
struct tegra_xusb_usb3_pad *usb3;
struct tegra_xusb_pad *pad;
int err;
usb3 = kzalloc(sizeof(*usb3), GFP_KERNEL);
if (!usb3)
return ERR_PTR(-ENOMEM);
pad = &usb3->base;
pad->ops = &tegra186_usb3_lane_ops;
pad->soc = soc;
err = tegra_xusb_pad_init(pad, padctl, np);
if (err < 0) {
kfree(usb3);
goto out;
}
err = tegra_xusb_pad_register(pad, &usb3_phy_ops);
if (err < 0)
goto unregister;
dev_set_drvdata(&pad->dev, pad);
return pad;
unregister:
device_unregister(&pad->dev);
out:
return ERR_PTR(err);
}
static void tegra186_usb3_pad_remove(struct tegra_xusb_pad *pad)
{
struct tegra_xusb_usb2_pad *usb2 = to_usb2_pad(pad);
kfree(usb2);
}
static const struct tegra_xusb_pad_ops tegra186_usb3_pad_ops = {
.probe = tegra186_usb3_pad_probe,
.remove = tegra186_usb3_pad_remove,
};
static const char * const tegra186_usb3_functions[] = {
"xusb",
};
static int
tegra186_xusb_read_fuse_calibration(struct tegra186_xusb_padctl *padctl)
{
struct device *dev = padctl->base.dev;
unsigned int i, count;
u32 value, *level;
int err;
count = padctl->base.soc->ports.usb2.count;
level = devm_kcalloc(dev, count, sizeof(u32), GFP_KERNEL);
if (!level)
return -ENOMEM;
err = tegra_fuse_readl(TEGRA_FUSE_SKU_CALIB_0, &value);
if (err) {
if (err != -EPROBE_DEFER)
dev_err(dev, "failed to read calibration fuse: %d\n",
err);
return err;
}
dev_dbg(dev, "FUSE_USB_CALIB_0 %#x\n", value);
for (i = 0; i < count; i++)
level[i] = (value >> HS_CURR_LEVEL_PADX_SHIFT(i)) &
HS_CURR_LEVEL_PAD_MASK;
padctl->calib.hs_curr_level = level;
padctl->calib.hs_squelch = (value >> HS_SQUELCH_SHIFT) &
HS_SQUELCH_MASK;
padctl->calib.hs_term_range_adj = (value >> HS_TERM_RANGE_ADJ_SHIFT) &
HS_TERM_RANGE_ADJ_MASK;
err = tegra_fuse_readl(TEGRA_FUSE_USB_CALIB_EXT_0, &value);
if (err) {
dev_err(dev, "failed to read calibration fuse: %d\n", err);
return err;
}
dev_dbg(dev, "FUSE_USB_CALIB_EXT_0 %#x\n", value);
padctl->calib.rpd_ctrl = (value >> RPD_CTRL_SHIFT) & RPD_CTRL_MASK;
return 0;
}
static struct tegra_xusb_padctl *
tegra186_xusb_padctl_probe(struct device *dev,
const struct tegra_xusb_padctl_soc *soc)
{
struct tegra186_xusb_padctl *priv;
int err;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return ERR_PTR(-ENOMEM);
priv->base.dev = dev;
priv->base.soc = soc;
err = tegra186_xusb_read_fuse_calibration(priv);
if (err < 0)
return ERR_PTR(err);
return &priv->base;
}
static void tegra186_xusb_padctl_remove(struct tegra_xusb_padctl *padctl)
{
}
static const struct tegra_xusb_padctl_ops tegra186_xusb_padctl_ops = {
.probe = tegra186_xusb_padctl_probe,
.remove = tegra186_xusb_padctl_remove,
.vbus_override = tegra186_xusb_padctl_vbus_override,
};
#if IS_ENABLED(CONFIG_ARCH_TEGRA_186_SOC)
static const char * const tegra186_xusb_padctl_supply_names[] = {
"avdd-pll-erefeut",
"avdd-usb",
"vclamp-usb",
"vddio-hsic",
};
static const struct tegra_xusb_lane_soc tegra186_usb2_lanes[] = {
TEGRA186_LANE("usb2-0", 0, 0, 0, usb2),
TEGRA186_LANE("usb2-1", 0, 0, 0, usb2),
TEGRA186_LANE("usb2-2", 0, 0, 0, usb2),
};
static const struct tegra_xusb_pad_soc tegra186_usb2_pad = {
.name = "usb2",
.num_lanes = ARRAY_SIZE(tegra186_usb2_lanes),
.lanes = tegra186_usb2_lanes,
.ops = &tegra186_usb2_pad_ops,
};
static const struct tegra_xusb_lane_soc tegra186_usb3_lanes[] = {
TEGRA186_LANE("usb3-0", 0, 0, 0, usb3),
TEGRA186_LANE("usb3-1", 0, 0, 0, usb3),
TEGRA186_LANE("usb3-2", 0, 0, 0, usb3),
};
static const struct tegra_xusb_pad_soc tegra186_usb3_pad = {
.name = "usb3",
.num_lanes = ARRAY_SIZE(tegra186_usb3_lanes),
.lanes = tegra186_usb3_lanes,
.ops = &tegra186_usb3_pad_ops,
};
static const struct tegra_xusb_pad_soc * const tegra186_pads[] = {
&tegra186_usb2_pad,
&tegra186_usb3_pad,
#if 0 /* TODO implement */
&tegra186_hsic_pad,
#endif
};
const struct tegra_xusb_padctl_soc tegra186_xusb_padctl_soc = {
.num_pads = ARRAY_SIZE(tegra186_pads),
.pads = tegra186_pads,
.ports = {
.usb2 = {
.ops = &tegra186_usb2_port_ops,
.count = 3,
},
#if 0 /* TODO implement */
.hsic = {
.ops = &tegra186_hsic_port_ops,
.count = 1,
},
#endif
.usb3 = {
.ops = &tegra186_usb3_port_ops,
.count = 3,
},
},
.ops = &tegra186_xusb_padctl_ops,
.supply_names = tegra186_xusb_padctl_supply_names,
.num_supplies = ARRAY_SIZE(tegra186_xusb_padctl_supply_names),
};
EXPORT_SYMBOL_GPL(tegra186_xusb_padctl_soc);
#endif
#if IS_ENABLED(CONFIG_ARCH_TEGRA_194_SOC)
static const char * const tegra194_xusb_padctl_supply_names[] = {
"avdd-usb",
"vclamp-usb",
};
static const struct tegra_xusb_lane_soc tegra194_usb2_lanes[] = {
TEGRA186_LANE("usb2-0", 0, 0, 0, usb2),
TEGRA186_LANE("usb2-1", 0, 0, 0, usb2),
TEGRA186_LANE("usb2-2", 0, 0, 0, usb2),
TEGRA186_LANE("usb2-3", 0, 0, 0, usb2),
};
static const struct tegra_xusb_pad_soc tegra194_usb2_pad = {
.name = "usb2",
.num_lanes = ARRAY_SIZE(tegra194_usb2_lanes),
.lanes = tegra194_usb2_lanes,
.ops = &tegra186_usb2_pad_ops,
};
static const struct tegra_xusb_lane_soc tegra194_usb3_lanes[] = {
TEGRA186_LANE("usb3-0", 0, 0, 0, usb3),
TEGRA186_LANE("usb3-1", 0, 0, 0, usb3),
TEGRA186_LANE("usb3-2", 0, 0, 0, usb3),
TEGRA186_LANE("usb3-3", 0, 0, 0, usb3),
};
static const struct tegra_xusb_pad_soc tegra194_usb3_pad = {
.name = "usb3",
.num_lanes = ARRAY_SIZE(tegra194_usb3_lanes),
.lanes = tegra194_usb3_lanes,
.ops = &tegra186_usb3_pad_ops,
};
static const struct tegra_xusb_pad_soc * const tegra194_pads[] = {
&tegra194_usb2_pad,
&tegra194_usb3_pad,
};
const struct tegra_xusb_padctl_soc tegra194_xusb_padctl_soc = {
.num_pads = ARRAY_SIZE(tegra194_pads),
.pads = tegra194_pads,
.ports = {
.usb2 = {
.ops = &tegra186_usb2_port_ops,
.count = 4,
},
.usb3 = {
.ops = &tegra186_usb3_port_ops,
.count = 4,
},
},
.ops = &tegra186_xusb_padctl_ops,
.supply_names = tegra194_xusb_padctl_supply_names,
.num_supplies = ARRAY_SIZE(tegra194_xusb_padctl_supply_names),
.supports_gen2 = true,
};
EXPORT_SYMBOL_GPL(tegra194_xusb_padctl_soc);
#endif
MODULE_AUTHOR("JC Kuo <jckuo@nvidia.com>");
MODULE_DESCRIPTION("NVIDIA Tegra186 XUSB Pad Controller driver");
MODULE_LICENSE("GPL v2");