OpenCloudOS-Kernel/net/rds/ib.c

326 lines
8.8 KiB
C
Raw Normal View History

/*
* Copyright (c) 2006 Oracle. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
*/
#include <linux/kernel.h>
#include <linux/in.h>
#include <linux/if.h>
#include <linux/netdevice.h>
#include <linux/inetdevice.h>
#include <linux/if_arp.h>
#include <linux/delay.h>
#include "rds.h"
#include "ib.h"
unsigned int fmr_pool_size = RDS_FMR_POOL_SIZE;
unsigned int fmr_message_size = RDS_FMR_SIZE + 1; /* +1 allows for unaligned MRs */
unsigned int rds_ib_retry_count = RDS_IB_DEFAULT_RETRY_COUNT;
module_param(fmr_pool_size, int, 0444);
MODULE_PARM_DESC(fmr_pool_size, " Max number of fmr per HCA");
module_param(fmr_message_size, int, 0444);
MODULE_PARM_DESC(fmr_message_size, " Max size of a RDMA transfer");
module_param(rds_ib_retry_count, int, 0444);
MODULE_PARM_DESC(rds_ib_retry_count, " Number of hw retries before reporting an error");
struct list_head rds_ib_devices;
/* NOTE: if also grabbing ibdev lock, grab this first */
DEFINE_SPINLOCK(ib_nodev_conns_lock);
LIST_HEAD(ib_nodev_conns);
void rds_ib_add_one(struct ib_device *device)
{
struct rds_ib_device *rds_ibdev;
struct ib_device_attr *dev_attr;
/* Only handle IB (no iWARP) devices */
if (device->node_type != RDMA_NODE_IB_CA)
return;
dev_attr = kmalloc(sizeof *dev_attr, GFP_KERNEL);
if (!dev_attr)
return;
if (ib_query_device(device, dev_attr)) {
rdsdebug("Query device failed for %s\n", device->name);
goto free_attr;
}
rds_ibdev = kmalloc(sizeof *rds_ibdev, GFP_KERNEL);
if (!rds_ibdev)
goto free_attr;
spin_lock_init(&rds_ibdev->spinlock);
rds_ibdev->max_wrs = dev_attr->max_qp_wr;
rds_ibdev->max_sge = min(dev_attr->max_sge, RDS_IB_MAX_SGE);
rds_ibdev->fmr_max_remaps = dev_attr->max_map_per_fmr?: 32;
rds_ibdev->max_fmrs = dev_attr->max_fmr ?
min_t(unsigned int, dev_attr->max_fmr, fmr_pool_size) :
fmr_pool_size;
rds_ibdev->dev = device;
rds_ibdev->pd = ib_alloc_pd(device);
if (IS_ERR(rds_ibdev->pd))
goto free_dev;
rds_ibdev->mr = ib_get_dma_mr(rds_ibdev->pd,
IB_ACCESS_LOCAL_WRITE);
if (IS_ERR(rds_ibdev->mr))
goto err_pd;
rds_ibdev->mr_pool = rds_ib_create_mr_pool(rds_ibdev);
if (IS_ERR(rds_ibdev->mr_pool)) {
rds_ibdev->mr_pool = NULL;
goto err_mr;
}
INIT_LIST_HEAD(&rds_ibdev->ipaddr_list);
INIT_LIST_HEAD(&rds_ibdev->conn_list);
list_add_tail(&rds_ibdev->list, &rds_ib_devices);
ib_set_client_data(device, &rds_ib_client, rds_ibdev);
goto free_attr;
err_mr:
ib_dereg_mr(rds_ibdev->mr);
err_pd:
ib_dealloc_pd(rds_ibdev->pd);
free_dev:
kfree(rds_ibdev);
free_attr:
kfree(dev_attr);
}
void rds_ib_remove_one(struct ib_device *device)
{
struct rds_ib_device *rds_ibdev;
struct rds_ib_ipaddr *i_ipaddr, *i_next;
rds_ibdev = ib_get_client_data(device, &rds_ib_client);
if (!rds_ibdev)
return;
list_for_each_entry_safe(i_ipaddr, i_next, &rds_ibdev->ipaddr_list, list) {
list_del(&i_ipaddr->list);
kfree(i_ipaddr);
}
rds_ib_destroy_conns(rds_ibdev);
if (rds_ibdev->mr_pool)
rds_ib_destroy_mr_pool(rds_ibdev->mr_pool);
ib_dereg_mr(rds_ibdev->mr);
while (ib_dealloc_pd(rds_ibdev->pd)) {
rdsdebug("Failed to dealloc pd %p\n", rds_ibdev->pd);
msleep(1);
}
list_del(&rds_ibdev->list);
kfree(rds_ibdev);
}
struct ib_client rds_ib_client = {
.name = "rds_ib",
.add = rds_ib_add_one,
.remove = rds_ib_remove_one
};
static int rds_ib_conn_info_visitor(struct rds_connection *conn,
void *buffer)
{
struct rds_info_rdma_connection *iinfo = buffer;
struct rds_ib_connection *ic;
/* We will only ever look at IB transports */
if (conn->c_trans != &rds_ib_transport)
return 0;
iinfo->src_addr = conn->c_laddr;
iinfo->dst_addr = conn->c_faddr;
memset(&iinfo->src_gid, 0, sizeof(iinfo->src_gid));
memset(&iinfo->dst_gid, 0, sizeof(iinfo->dst_gid));
if (rds_conn_state(conn) == RDS_CONN_UP) {
struct rds_ib_device *rds_ibdev;
struct rdma_dev_addr *dev_addr;
ic = conn->c_transport_data;
dev_addr = &ic->i_cm_id->route.addr.dev_addr;
RDMA/cm: fix loopback address support The RDMA CM is intended to support the use of a loopback address when establishing a connection; however, the behavior of the CM when loopback addresses are used is confusing and does not always work, depending on whether loopback was specified by the server, the client, or both. The defined behavior of rdma_bind_addr is to associate an RDMA device with an rdma_cm_id, as long as the user specified a non- zero address. (ie they weren't just trying to reserve a port) Currently, if the loopback address is passed to rdam_bind_addr, no device is associated with the rdma_cm_id. Fix this. If a loopback address is specified by the client as the destination address for a connection, it will fail to establish a connection. This is true even if the server is listing across all addresses or on the loopback address itself. The issue is that the server tries to translate the IP address carried in the REQ message to a local net_device address, which fails. The translation is not needed in this case, since the REQ carries the actual HW address that should be used. Finally, cleanup loopback support to be more transport neutral. Replace separate calls to get/set the sgid and dgid from the device address to a single call that behaves correctly depending on the format of the device address. And support both IPv4 and IPv6 address formats. Signed-off-by: Sean Hefty <sean.hefty@intel.com> [ Fixed RDS build by s/ib_addr_get/rdma_addr_get/ - Roland ] Signed-off-by: Roland Dreier <rolandd@cisco.com>
2009-11-20 05:26:06 +08:00
rdma_addr_get_sgid(dev_addr, (union ib_gid *) &iinfo->src_gid);
rdma_addr_get_dgid(dev_addr, (union ib_gid *) &iinfo->dst_gid);
rds_ibdev = ib_get_client_data(ic->i_cm_id->device, &rds_ib_client);
iinfo->max_send_wr = ic->i_send_ring.w_nr;
iinfo->max_recv_wr = ic->i_recv_ring.w_nr;
iinfo->max_send_sge = rds_ibdev->max_sge;
rds_ib_get_mr_info(rds_ibdev, iinfo);
}
return 1;
}
static void rds_ib_ic_info(struct socket *sock, unsigned int len,
struct rds_info_iterator *iter,
struct rds_info_lengths *lens)
{
rds_for_each_conn_info(sock, len, iter, lens,
rds_ib_conn_info_visitor,
sizeof(struct rds_info_rdma_connection));
}
/*
* Early RDS/IB was built to only bind to an address if there is an IPoIB
* device with that address set.
*
* If it were me, I'd advocate for something more flexible. Sending and
* receiving should be device-agnostic. Transports would try and maintain
* connections between peers who have messages queued. Userspace would be
* allowed to influence which paths have priority. We could call userspace
* asserting this policy "routing".
*/
static int rds_ib_laddr_check(__be32 addr)
{
int ret;
struct rdma_cm_id *cm_id;
struct sockaddr_in sin;
/* Create a CMA ID and try to bind it. This catches both
* IB and iWARP capable NICs.
*/
cm_id = rdma_create_id(NULL, NULL, RDMA_PS_TCP);
if (IS_ERR(cm_id))
return PTR_ERR(cm_id);
memset(&sin, 0, sizeof(sin));
sin.sin_family = AF_INET;
sin.sin_addr.s_addr = addr;
/* rdma_bind_addr will only succeed for IB & iWARP devices */
ret = rdma_bind_addr(cm_id, (struct sockaddr *)&sin);
/* due to this, we will claim to support iWARP devices unless we
check node_type. */
if (ret || cm_id->device->node_type != RDMA_NODE_IB_CA)
ret = -EADDRNOTAVAIL;
rdsdebug("addr %pI4 ret %d node type %d\n",
&addr, ret,
cm_id->device ? cm_id->device->node_type : -1);
rdma_destroy_id(cm_id);
return ret;
}
void rds_ib_exit(void)
{
rds_info_deregister_func(RDS_INFO_IB_CONNECTIONS, rds_ib_ic_info);
rds_ib_destroy_nodev_conns();
ib_unregister_client(&rds_ib_client);
rds_ib_sysctl_exit();
rds_ib_recv_exit();
rds_trans_unregister(&rds_ib_transport);
}
struct rds_transport rds_ib_transport = {
.laddr_check = rds_ib_laddr_check,
.xmit_complete = rds_ib_xmit_complete,
.xmit = rds_ib_xmit,
.xmit_cong_map = NULL,
.xmit_rdma = rds_ib_xmit_rdma,
.recv = rds_ib_recv,
.conn_alloc = rds_ib_conn_alloc,
.conn_free = rds_ib_conn_free,
.conn_connect = rds_ib_conn_connect,
.conn_shutdown = rds_ib_conn_shutdown,
.inc_copy_to_user = rds_ib_inc_copy_to_user,
.inc_purge = rds_ib_inc_purge,
.inc_free = rds_ib_inc_free,
.cm_initiate_connect = rds_ib_cm_initiate_connect,
.cm_handle_connect = rds_ib_cm_handle_connect,
.cm_connect_complete = rds_ib_cm_connect_complete,
.stats_info_copy = rds_ib_stats_info_copy,
.exit = rds_ib_exit,
.get_mr = rds_ib_get_mr,
.sync_mr = rds_ib_sync_mr,
.free_mr = rds_ib_free_mr,
.flush_mrs = rds_ib_flush_mrs,
.t_owner = THIS_MODULE,
.t_name = "infiniband",
.t_type = RDS_TRANS_IB
};
int __init rds_ib_init(void)
{
int ret;
INIT_LIST_HEAD(&rds_ib_devices);
ret = ib_register_client(&rds_ib_client);
if (ret)
goto out;
ret = rds_ib_sysctl_init();
if (ret)
goto out_ibreg;
ret = rds_ib_recv_init();
if (ret)
goto out_sysctl;
ret = rds_trans_register(&rds_ib_transport);
if (ret)
goto out_recv;
rds_info_register_func(RDS_INFO_IB_CONNECTIONS, rds_ib_ic_info);
goto out;
out_recv:
rds_ib_recv_exit();
out_sysctl:
rds_ib_sysctl_exit();
out_ibreg:
ib_unregister_client(&rds_ib_client);
out:
return ret;
}
MODULE_LICENSE("GPL");