OpenCloudOS-Kernel/drivers/i2c/busses/i2c-designware-pcidrv.c

310 lines
7.6 KiB
C
Raw Normal View History

/*
* Synopsys DesignWare I2C adapter driver (master only).
*
* Based on the TI DAVINCI I2C adapter driver.
*
* Copyright (C) 2006 Texas Instruments.
* Copyright (C) 2007 MontaVista Software Inc.
* Copyright (C) 2009 Provigent Ltd.
* Copyright (C) 2011, 2015 Intel Corporation.
*
* ----------------------------------------------------------------------------
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
* ----------------------------------------------------------------------------
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/pm_runtime.h>
#include <linux/acpi.h>
#include "i2c-designware-core.h"
#define DRIVER_NAME "i2c-designware-pci"
enum dw_pci_ctl_id_t {
medfield,
baytrail,
haswell,
};
struct dw_scl_sda_cfg {
u32 ss_hcnt;
u32 fs_hcnt;
u32 ss_lcnt;
u32 fs_lcnt;
u32 sda_hold;
};
struct dw_pci_controller {
u32 bus_num;
u32 bus_cfg;
u32 tx_fifo_depth;
u32 rx_fifo_depth;
u32 clk_khz;
u32 functionality;
struct dw_scl_sda_cfg *scl_sda_cfg;
int (*setup)(struct pci_dev *pdev, struct dw_pci_controller *c);
};
#define INTEL_MID_STD_CFG (DW_IC_CON_MASTER | \
DW_IC_CON_SLAVE_DISABLE | \
DW_IC_CON_RESTART_EN)
#define DW_DEFAULT_FUNCTIONALITY (I2C_FUNC_I2C | \
I2C_FUNC_SMBUS_BYTE | \
I2C_FUNC_SMBUS_BYTE_DATA | \
I2C_FUNC_SMBUS_WORD_DATA | \
I2C_FUNC_SMBUS_I2C_BLOCK)
/* BayTrail HCNT/LCNT/SDA hold time */
static struct dw_scl_sda_cfg byt_config = {
.ss_hcnt = 0x200,
.fs_hcnt = 0x55,
.ss_lcnt = 0x200,
.fs_lcnt = 0x99,
.sda_hold = 0x6,
};
/* Haswell HCNT/LCNT/SDA hold time */
static struct dw_scl_sda_cfg hsw_config = {
.ss_hcnt = 0x01b0,
.fs_hcnt = 0x48,
.ss_lcnt = 0x01fb,
.fs_lcnt = 0xa0,
.sda_hold = 0x9,
};
static int mfld_setup(struct pci_dev *pdev, struct dw_pci_controller *c)
{
switch (pdev->device) {
case 0x0817:
c->bus_cfg &= ~DW_IC_CON_SPEED_MASK;
c->bus_cfg |= DW_IC_CON_SPEED_STD;
case 0x0818:
case 0x0819:
c->bus_num = pdev->device - 0x817 + 3;
return 0;
case 0x082C:
case 0x082D:
case 0x082E:
c->bus_num = pdev->device - 0x82C + 0;
return 0;
}
return -ENODEV;
}
static struct dw_pci_controller dw_pci_controllers[] = {
[medfield] = {
.bus_num = -1,
.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
.tx_fifo_depth = 32,
.rx_fifo_depth = 32,
.clk_khz = 25000,
.setup = mfld_setup,
},
[baytrail] = {
.bus_num = -1,
.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
.tx_fifo_depth = 32,
.rx_fifo_depth = 32,
.functionality = I2C_FUNC_10BIT_ADDR,
.scl_sda_cfg = &byt_config,
},
[haswell] = {
.bus_num = -1,
.bus_cfg = INTEL_MID_STD_CFG | DW_IC_CON_SPEED_FAST,
.tx_fifo_depth = 32,
.rx_fifo_depth = 32,
.functionality = I2C_FUNC_10BIT_ADDR,
.scl_sda_cfg = &hsw_config,
},
};
#ifdef CONFIG_PM
i2c-designware: Fix PCI core warning on suspend/resume PCI core warns if the legacy PM and new PM functions are present. Update the driver to only use the new power management framework. This patch fixes the following warning seen during suspend/resume: <7>[ 24.193850] i2c-designware-pci 0000:08:13.0: suspend <4>[ 24.193866] ------------[ cut here ]------------ <4>[ 24.193892] WARNING: at drivers/pci/pci-driver.c:605 pci_has_legacy_pm_support+0x48/0x4d() <4>[ 24.193925] Hardware name: OakTrail <4>[ 24.193936] Modules linked in: <4>[ 24.193958] Pid: 2834, comm: kworker/u:22 Tainted: G W 2.6.36greenridge-01402-gc8047e6 #171 <4>[ 24.193974] Call Trace: <4>[ 24.193999] [<c1033a93>] warn_slowpath_common+0x66/0xc2 <4>[ 24.194025] [<c1164143>] ? pci_has_legacy_pm_support+0x48/0x4d <4>[ 24.194052] [<c1033afe>] warn_slowpath_null+0xf/0x13 <4>[ 24.194079] [<c1164143>] pci_has_legacy_pm_support+0x48/0x4d <4>[ 24.194106] [<c11643ff>] pci_pm_suspend+0x22/0x154 <4>[ 24.194131] [<c11643dd>] ? pci_pm_suspend+0x0/0x154 <4>[ 24.194156] [<c11e8a7a>] pm_op+0x3e/0x95 <4>[ 24.194182] [<c11e931d>] __device_suspend+0x12e/0x194 <4>[ 24.194208] [<c11e974d>] ? dpm_drv_timeout+0x0/0x47 <4>[ 24.194237] [<c11e9729>] async_suspend+0x16/0x3a <4>[ 24.194265] [<c104de8e>] async_run_entry_fn+0x97/0x135 <4>[ 24.194291] [<c1043c34>] process_one_work+0x1c9/0x2db Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-07 02:26:37 +08:00
static int i2c_dw_pci_suspend(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
i2c_dw_disable(pci_get_drvdata(pdev));
return 0;
}
i2c-designware: Fix PCI core warning on suspend/resume PCI core warns if the legacy PM and new PM functions are present. Update the driver to only use the new power management framework. This patch fixes the following warning seen during suspend/resume: <7>[ 24.193850] i2c-designware-pci 0000:08:13.0: suspend <4>[ 24.193866] ------------[ cut here ]------------ <4>[ 24.193892] WARNING: at drivers/pci/pci-driver.c:605 pci_has_legacy_pm_support+0x48/0x4d() <4>[ 24.193925] Hardware name: OakTrail <4>[ 24.193936] Modules linked in: <4>[ 24.193958] Pid: 2834, comm: kworker/u:22 Tainted: G W 2.6.36greenridge-01402-gc8047e6 #171 <4>[ 24.193974] Call Trace: <4>[ 24.193999] [<c1033a93>] warn_slowpath_common+0x66/0xc2 <4>[ 24.194025] [<c1164143>] ? pci_has_legacy_pm_support+0x48/0x4d <4>[ 24.194052] [<c1033afe>] warn_slowpath_null+0xf/0x13 <4>[ 24.194079] [<c1164143>] pci_has_legacy_pm_support+0x48/0x4d <4>[ 24.194106] [<c11643ff>] pci_pm_suspend+0x22/0x154 <4>[ 24.194131] [<c11643dd>] ? pci_pm_suspend+0x0/0x154 <4>[ 24.194156] [<c11e8a7a>] pm_op+0x3e/0x95 <4>[ 24.194182] [<c11e931d>] __device_suspend+0x12e/0x194 <4>[ 24.194208] [<c11e974d>] ? dpm_drv_timeout+0x0/0x47 <4>[ 24.194237] [<c11e9729>] async_suspend+0x16/0x3a <4>[ 24.194265] [<c104de8e>] async_run_entry_fn+0x97/0x135 <4>[ 24.194291] [<c1043c34>] process_one_work+0x1c9/0x2db Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2011-10-07 02:26:37 +08:00
static int i2c_dw_pci_resume(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
return i2c_dw_init(pci_get_drvdata(pdev));
}
#endif
static UNIVERSAL_DEV_PM_OPS(i2c_dw_pm_ops, i2c_dw_pci_suspend,
i2c_dw_pci_resume, NULL);
static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev)
{
return dev->controller->clk_khz;
}
static int i2c_dw_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
struct dw_i2c_dev *dev;
struct i2c_adapter *adap;
int r;
struct dw_pci_controller *controller;
struct dw_scl_sda_cfg *cfg;
if (id->driver_data >= ARRAY_SIZE(dw_pci_controllers)) {
dev_err(&pdev->dev, "%s: invalid driver data %ld\n", __func__,
id->driver_data);
return -EINVAL;
}
controller = &dw_pci_controllers[id->driver_data];
r = pcim_enable_device(pdev);
if (r) {
dev_err(&pdev->dev, "Failed to enable I2C PCI device (%d)\n",
r);
return r;
}
r = pcim_iomap_regions(pdev, 1 << 0, pci_name(pdev));
if (r) {
dev_err(&pdev->dev, "I/O memory remapping failed\n");
return r;
}
dev = devm_kzalloc(&pdev->dev, sizeof(struct dw_i2c_dev), GFP_KERNEL);
if (!dev)
return -ENOMEM;
dev->clk = NULL;
dev->controller = controller;
dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz;
dev->base = pcim_iomap_table(pdev)[0];
dev->dev = &pdev->dev;
dev->irq = pdev->irq;
if (controller->setup) {
r = controller->setup(pdev, controller);
if (r)
return r;
}
dev->functionality = controller->functionality |
DW_DEFAULT_FUNCTIONALITY;
dev->master_cfg = controller->bus_cfg;
if (controller->scl_sda_cfg) {
cfg = controller->scl_sda_cfg;
dev->ss_hcnt = cfg->ss_hcnt;
dev->fs_hcnt = cfg->fs_hcnt;
dev->ss_lcnt = cfg->ss_lcnt;
dev->fs_lcnt = cfg->fs_lcnt;
dev->sda_hold_time = cfg->sda_hold;
}
pci_set_drvdata(pdev, dev);
dev->tx_fifo_depth = controller->tx_fifo_depth;
dev->rx_fifo_depth = controller->rx_fifo_depth;
adap = &dev->adapter;
adap->owner = THIS_MODULE;
adap->class = 0;
ACPI_COMPANION_SET(&adap->dev, ACPI_COMPANION(&pdev->dev));
adap->nr = controller->bus_num;
r = i2c_dw_probe(dev);
if (r)
return r;
pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_put_autosuspend(&pdev->dev);
pm_runtime_allow(&pdev->dev);
return 0;
}
static void i2c_dw_pci_remove(struct pci_dev *pdev)
{
struct dw_i2c_dev *dev = pci_get_drvdata(pdev);
i2c_dw_disable(dev);
pm_runtime_forbid(&pdev->dev);
pm_runtime_get_noresume(&pdev->dev);
i2c_del_adapter(&dev->adapter);
}
/* work with hotplug and coldplug */
MODULE_ALIAS("i2c_designware-pci");
static const struct pci_device_id i2_designware_pci_ids[] = {
/* Medfield */
{ PCI_VDEVICE(INTEL, 0x0817), medfield },
{ PCI_VDEVICE(INTEL, 0x0818), medfield },
{ PCI_VDEVICE(INTEL, 0x0819), medfield },
{ PCI_VDEVICE(INTEL, 0x082C), medfield },
{ PCI_VDEVICE(INTEL, 0x082D), medfield },
{ PCI_VDEVICE(INTEL, 0x082E), medfield },
/* Baytrail */
{ PCI_VDEVICE(INTEL, 0x0F41), baytrail },
{ PCI_VDEVICE(INTEL, 0x0F42), baytrail },
{ PCI_VDEVICE(INTEL, 0x0F43), baytrail },
{ PCI_VDEVICE(INTEL, 0x0F44), baytrail },
{ PCI_VDEVICE(INTEL, 0x0F45), baytrail },
{ PCI_VDEVICE(INTEL, 0x0F46), baytrail },
{ PCI_VDEVICE(INTEL, 0x0F47), baytrail },
/* Haswell */
{ PCI_VDEVICE(INTEL, 0x9c61), haswell },
{ PCI_VDEVICE(INTEL, 0x9c62), haswell },
/* Braswell / Cherrytrail */
{ PCI_VDEVICE(INTEL, 0x22C1), baytrail },
{ PCI_VDEVICE(INTEL, 0x22C2), baytrail },
{ PCI_VDEVICE(INTEL, 0x22C3), baytrail },
{ PCI_VDEVICE(INTEL, 0x22C4), baytrail },
{ PCI_VDEVICE(INTEL, 0x22C5), baytrail },
{ PCI_VDEVICE(INTEL, 0x22C6), baytrail },
{ PCI_VDEVICE(INTEL, 0x22C7), baytrail },
{ 0,}
};
MODULE_DEVICE_TABLE(pci, i2_designware_pci_ids);
static struct pci_driver dw_i2c_driver = {
.name = DRIVER_NAME,
.id_table = i2_designware_pci_ids,
.probe = i2c_dw_pci_probe,
.remove = i2c_dw_pci_remove,
.driver = {
.pm = &i2c_dw_pm_ops,
},
};
module_pci_driver(dw_i2c_driver);
MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
MODULE_DESCRIPTION("Synopsys DesignWare PCI I2C bus adapter");
MODULE_LICENSE("GPL");