UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/include/drm/bridge/dw_hdmi.h

180 lines
8.5 KiB
C
Raw Normal View History

drm: imx: imx-hdmi: move imx-hdmi to bridge/dw_hdmi the original imx hdmi driver is under drm/imx/, which depends on imx-drm, so move the imx hdmi driver out to drm/bridge and rename it to dw_hdmi Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-12-05 14:26:31 +08:00
/*
* Copyright (C) 2011 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef __DW_HDMI__
#define __DW_HDMI__
drm: remove include of drmP.h from bridge/dw_hdmi.h drmP.h is an relic from the days when there was a single header file. To enable the removal of drmP.h from all users drop include of drmP.h from bridge/dw_hdmi.h. A few files relied on the file included in drmP.h - add explicit include statements or forward declarations to these files. Build tested with arm and x86. v2: - prefer forward declarations when possible (Laurent Pinchart) - sort include files (Laurent Pinchart) Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190108192939.15255-7-sam@ravnborg.org
2019-01-09 03:29:33 +08:00
struct drm_connector;
struct drm_display_mode;
struct drm_encoder;
drm: bridge/dw_hdmi: introduce interface to setting sample rate Introduce dw_hdmi_set_sample_rate(), which allows us to configure the audio sample rate, setting the CTS/N values appropriately. Tested-by: Yakir Yang <ykk@rock-chips.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-03-27 20:50:58 +08:00
struct dw_hdmi;
drm: remove include of drmP.h from bridge/dw_hdmi.h drmP.h is an relic from the days when there was a single header file. To enable the removal of drmP.h from all users drop include of drmP.h from bridge/dw_hdmi.h. A few files relied on the file included in drmP.h - add explicit include statements or forward declarations to these files. Build tested with arm and x86. v2: - prefer forward declarations when possible (Laurent Pinchart) - sort include files (Laurent Pinchart) Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190108192939.15255-7-sam@ravnborg.org
2019-01-09 03:29:33 +08:00
struct platform_device;
drm: bridge/dw_hdmi: introduce interface to setting sample rate Introduce dw_hdmi_set_sample_rate(), which allows us to configure the audio sample rate, setting the CTS/N values appropriately. Tested-by: Yakir Yang <ykk@rock-chips.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-03-27 20:50:58 +08:00
drm: bridge: dw-hdmi: Switch to V4L bus format and encodings Switch code to use the newly introduced V4L bus formats IDs instead of custom defines. Also use the V4L encoding defines. Some display pipelines can only provide non-RBG input pixels to the HDMI TX Controller, this patch takes the pixel format from the plat_data if provided. Reviewed-by: Jose Abreu <joabreu@synopsys.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-04-04 20:31:57 +08:00
/**
* DOC: Supported input formats and encodings
*
* Depending on the Hardware configuration of the Controller IP, it supports
* a subset of the following input formats and encodings on its internal
* 48bit bus.
*
* +----------------------+----------------------------------+------------------------------+
DRM: Fix an incorrectly formatted table The "supported input formats" table in dw_hdmi.h was incorrectly formatted, using "+" signs where "|" needs to be. That, in turn, causes the PDF build to fail. Fixes: def23aa7e982 ("drm: bridge: dw-hdmi: Switch to V4L bus format and encodings") Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170623140013.0703107a@lwn.net
2017-06-24 04:00:13 +08:00
* | Format Name | Format Code | Encodings |
drm: bridge: dw-hdmi: Switch to V4L bus format and encodings Switch code to use the newly introduced V4L bus formats IDs instead of custom defines. Also use the V4L encoding defines. Some display pipelines can only provide non-RBG input pixels to the HDMI TX Controller, this patch takes the pixel format from the plat_data if provided. Reviewed-by: Jose Abreu <joabreu@synopsys.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-04-04 20:31:57 +08:00
* +----------------------+----------------------------------+------------------------------+
DRM: Fix an incorrectly formatted table The "supported input formats" table in dw_hdmi.h was incorrectly formatted, using "+" signs where "|" needs to be. That, in turn, causes the PDF build to fail. Fixes: def23aa7e982 ("drm: bridge: dw-hdmi: Switch to V4L bus format and encodings") Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170623140013.0703107a@lwn.net
2017-06-24 04:00:13 +08:00
* | RGB 4:4:4 8bit | ``MEDIA_BUS_FMT_RGB888_1X24`` | ``V4L2_YCBCR_ENC_DEFAULT`` |
drm: bridge: dw-hdmi: Switch to V4L bus format and encodings Switch code to use the newly introduced V4L bus formats IDs instead of custom defines. Also use the V4L encoding defines. Some display pipelines can only provide non-RBG input pixels to the HDMI TX Controller, this patch takes the pixel format from the plat_data if provided. Reviewed-by: Jose Abreu <joabreu@synopsys.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-04-04 20:31:57 +08:00
* +----------------------+----------------------------------+------------------------------+
DRM: Fix an incorrectly formatted table The "supported input formats" table in dw_hdmi.h was incorrectly formatted, using "+" signs where "|" needs to be. That, in turn, causes the PDF build to fail. Fixes: def23aa7e982 ("drm: bridge: dw-hdmi: Switch to V4L bus format and encodings") Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170623140013.0703107a@lwn.net
2017-06-24 04:00:13 +08:00
* | RGB 4:4:4 10bits | ``MEDIA_BUS_FMT_RGB101010_1X30`` | ``V4L2_YCBCR_ENC_DEFAULT`` |
drm: bridge: dw-hdmi: Switch to V4L bus format and encodings Switch code to use the newly introduced V4L bus formats IDs instead of custom defines. Also use the V4L encoding defines. Some display pipelines can only provide non-RBG input pixels to the HDMI TX Controller, this patch takes the pixel format from the plat_data if provided. Reviewed-by: Jose Abreu <joabreu@synopsys.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-04-04 20:31:57 +08:00
* +----------------------+----------------------------------+------------------------------+
DRM: Fix an incorrectly formatted table The "supported input formats" table in dw_hdmi.h was incorrectly formatted, using "+" signs where "|" needs to be. That, in turn, causes the PDF build to fail. Fixes: def23aa7e982 ("drm: bridge: dw-hdmi: Switch to V4L bus format and encodings") Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170623140013.0703107a@lwn.net
2017-06-24 04:00:13 +08:00
* | RGB 4:4:4 12bits | ``MEDIA_BUS_FMT_RGB121212_1X36`` | ``V4L2_YCBCR_ENC_DEFAULT`` |
drm: bridge: dw-hdmi: Switch to V4L bus format and encodings Switch code to use the newly introduced V4L bus formats IDs instead of custom defines. Also use the V4L encoding defines. Some display pipelines can only provide non-RBG input pixels to the HDMI TX Controller, this patch takes the pixel format from the plat_data if provided. Reviewed-by: Jose Abreu <joabreu@synopsys.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-04-04 20:31:57 +08:00
* +----------------------+----------------------------------+------------------------------+
DRM: Fix an incorrectly formatted table The "supported input formats" table in dw_hdmi.h was incorrectly formatted, using "+" signs where "|" needs to be. That, in turn, causes the PDF build to fail. Fixes: def23aa7e982 ("drm: bridge: dw-hdmi: Switch to V4L bus format and encodings") Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170623140013.0703107a@lwn.net
2017-06-24 04:00:13 +08:00
* | RGB 4:4:4 16bits | ``MEDIA_BUS_FMT_RGB161616_1X48`` | ``V4L2_YCBCR_ENC_DEFAULT`` |
drm: bridge: dw-hdmi: Switch to V4L bus format and encodings Switch code to use the newly introduced V4L bus formats IDs instead of custom defines. Also use the V4L encoding defines. Some display pipelines can only provide non-RBG input pixels to the HDMI TX Controller, this patch takes the pixel format from the plat_data if provided. Reviewed-by: Jose Abreu <joabreu@synopsys.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-04-04 20:31:57 +08:00
* +----------------------+----------------------------------+------------------------------+
DRM: Fix an incorrectly formatted table The "supported input formats" table in dw_hdmi.h was incorrectly formatted, using "+" signs where "|" needs to be. That, in turn, causes the PDF build to fail. Fixes: def23aa7e982 ("drm: bridge: dw-hdmi: Switch to V4L bus format and encodings") Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170623140013.0703107a@lwn.net
2017-06-24 04:00:13 +08:00
* | YCbCr 4:4:4 8bit | ``MEDIA_BUS_FMT_YUV8_1X24`` | ``V4L2_YCBCR_ENC_601`` |
* | | | or ``V4L2_YCBCR_ENC_709`` |
* | | | or ``V4L2_YCBCR_ENC_XV601`` |
* | | | or ``V4L2_YCBCR_ENC_XV709`` |
drm: bridge: dw-hdmi: Switch to V4L bus format and encodings Switch code to use the newly introduced V4L bus formats IDs instead of custom defines. Also use the V4L encoding defines. Some display pipelines can only provide non-RBG input pixels to the HDMI TX Controller, this patch takes the pixel format from the plat_data if provided. Reviewed-by: Jose Abreu <joabreu@synopsys.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-04-04 20:31:57 +08:00
* +----------------------+----------------------------------+------------------------------+
DRM: Fix an incorrectly formatted table The "supported input formats" table in dw_hdmi.h was incorrectly formatted, using "+" signs where "|" needs to be. That, in turn, causes the PDF build to fail. Fixes: def23aa7e982 ("drm: bridge: dw-hdmi: Switch to V4L bus format and encodings") Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170623140013.0703107a@lwn.net
2017-06-24 04:00:13 +08:00
* | YCbCr 4:4:4 10bits | ``MEDIA_BUS_FMT_YUV10_1X30`` | ``V4L2_YCBCR_ENC_601`` |
* | | | or ``V4L2_YCBCR_ENC_709`` |
* | | | or ``V4L2_YCBCR_ENC_XV601`` |
* | | | or ``V4L2_YCBCR_ENC_XV709`` |
drm: bridge: dw-hdmi: Switch to V4L bus format and encodings Switch code to use the newly introduced V4L bus formats IDs instead of custom defines. Also use the V4L encoding defines. Some display pipelines can only provide non-RBG input pixels to the HDMI TX Controller, this patch takes the pixel format from the plat_data if provided. Reviewed-by: Jose Abreu <joabreu@synopsys.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-04-04 20:31:57 +08:00
* +----------------------+----------------------------------+------------------------------+
DRM: Fix an incorrectly formatted table The "supported input formats" table in dw_hdmi.h was incorrectly formatted, using "+" signs where "|" needs to be. That, in turn, causes the PDF build to fail. Fixes: def23aa7e982 ("drm: bridge: dw-hdmi: Switch to V4L bus format and encodings") Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170623140013.0703107a@lwn.net
2017-06-24 04:00:13 +08:00
* | YCbCr 4:4:4 12bits | ``MEDIA_BUS_FMT_YUV12_1X36`` | ``V4L2_YCBCR_ENC_601`` |
* | | | or ``V4L2_YCBCR_ENC_709`` |
* | | | or ``V4L2_YCBCR_ENC_XV601`` |
* | | | or ``V4L2_YCBCR_ENC_XV709`` |
drm: bridge: dw-hdmi: Switch to V4L bus format and encodings Switch code to use the newly introduced V4L bus formats IDs instead of custom defines. Also use the V4L encoding defines. Some display pipelines can only provide non-RBG input pixels to the HDMI TX Controller, this patch takes the pixel format from the plat_data if provided. Reviewed-by: Jose Abreu <joabreu@synopsys.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-04-04 20:31:57 +08:00
* +----------------------+----------------------------------+------------------------------+
DRM: Fix an incorrectly formatted table The "supported input formats" table in dw_hdmi.h was incorrectly formatted, using "+" signs where "|" needs to be. That, in turn, causes the PDF build to fail. Fixes: def23aa7e982 ("drm: bridge: dw-hdmi: Switch to V4L bus format and encodings") Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170623140013.0703107a@lwn.net
2017-06-24 04:00:13 +08:00
* | YCbCr 4:4:4 16bits | ``MEDIA_BUS_FMT_YUV16_1X48`` | ``V4L2_YCBCR_ENC_601`` |
* | | | or ``V4L2_YCBCR_ENC_709`` |
* | | | or ``V4L2_YCBCR_ENC_XV601`` |
* | | | or ``V4L2_YCBCR_ENC_XV709`` |
drm: bridge: dw-hdmi: Switch to V4L bus format and encodings Switch code to use the newly introduced V4L bus formats IDs instead of custom defines. Also use the V4L encoding defines. Some display pipelines can only provide non-RBG input pixels to the HDMI TX Controller, this patch takes the pixel format from the plat_data if provided. Reviewed-by: Jose Abreu <joabreu@synopsys.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-04-04 20:31:57 +08:00
* +----------------------+----------------------------------+------------------------------+
DRM: Fix an incorrectly formatted table The "supported input formats" table in dw_hdmi.h was incorrectly formatted, using "+" signs where "|" needs to be. That, in turn, causes the PDF build to fail. Fixes: def23aa7e982 ("drm: bridge: dw-hdmi: Switch to V4L bus format and encodings") Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170623140013.0703107a@lwn.net
2017-06-24 04:00:13 +08:00
* | YCbCr 4:2:2 8bit | ``MEDIA_BUS_FMT_UYVY8_1X16`` | ``V4L2_YCBCR_ENC_601`` |
* | | | or ``V4L2_YCBCR_ENC_709`` |
drm: bridge: dw-hdmi: Switch to V4L bus format and encodings Switch code to use the newly introduced V4L bus formats IDs instead of custom defines. Also use the V4L encoding defines. Some display pipelines can only provide non-RBG input pixels to the HDMI TX Controller, this patch takes the pixel format from the plat_data if provided. Reviewed-by: Jose Abreu <joabreu@synopsys.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-04-04 20:31:57 +08:00
* +----------------------+----------------------------------+------------------------------+
DRM: Fix an incorrectly formatted table The "supported input formats" table in dw_hdmi.h was incorrectly formatted, using "+" signs where "|" needs to be. That, in turn, causes the PDF build to fail. Fixes: def23aa7e982 ("drm: bridge: dw-hdmi: Switch to V4L bus format and encodings") Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170623140013.0703107a@lwn.net
2017-06-24 04:00:13 +08:00
* | YCbCr 4:2:2 10bits | ``MEDIA_BUS_FMT_UYVY10_1X20`` | ``V4L2_YCBCR_ENC_601`` |
* | | | or ``V4L2_YCBCR_ENC_709`` |
drm: bridge: dw-hdmi: Switch to V4L bus format and encodings Switch code to use the newly introduced V4L bus formats IDs instead of custom defines. Also use the V4L encoding defines. Some display pipelines can only provide non-RBG input pixels to the HDMI TX Controller, this patch takes the pixel format from the plat_data if provided. Reviewed-by: Jose Abreu <joabreu@synopsys.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-04-04 20:31:57 +08:00
* +----------------------+----------------------------------+------------------------------+
DRM: Fix an incorrectly formatted table The "supported input formats" table in dw_hdmi.h was incorrectly formatted, using "+" signs where "|" needs to be. That, in turn, causes the PDF build to fail. Fixes: def23aa7e982 ("drm: bridge: dw-hdmi: Switch to V4L bus format and encodings") Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170623140013.0703107a@lwn.net
2017-06-24 04:00:13 +08:00
* | YCbCr 4:2:2 12bits | ``MEDIA_BUS_FMT_UYVY12_1X24`` | ``V4L2_YCBCR_ENC_601`` |
* | | | or ``V4L2_YCBCR_ENC_709`` |
drm: bridge: dw-hdmi: Switch to V4L bus format and encodings Switch code to use the newly introduced V4L bus formats IDs instead of custom defines. Also use the V4L encoding defines. Some display pipelines can only provide non-RBG input pixels to the HDMI TX Controller, this patch takes the pixel format from the plat_data if provided. Reviewed-by: Jose Abreu <joabreu@synopsys.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-04-04 20:31:57 +08:00
* +----------------------+----------------------------------+------------------------------+
DRM: Fix an incorrectly formatted table The "supported input formats" table in dw_hdmi.h was incorrectly formatted, using "+" signs where "|" needs to be. That, in turn, causes the PDF build to fail. Fixes: def23aa7e982 ("drm: bridge: dw-hdmi: Switch to V4L bus format and encodings") Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170623140013.0703107a@lwn.net
2017-06-24 04:00:13 +08:00
* | YCbCr 4:2:0 8bit | ``MEDIA_BUS_FMT_UYYVYY8_0_5X24`` | ``V4L2_YCBCR_ENC_601`` |
* | | | or ``V4L2_YCBCR_ENC_709`` |
drm: bridge: dw-hdmi: Switch to V4L bus format and encodings Switch code to use the newly introduced V4L bus formats IDs instead of custom defines. Also use the V4L encoding defines. Some display pipelines can only provide non-RBG input pixels to the HDMI TX Controller, this patch takes the pixel format from the plat_data if provided. Reviewed-by: Jose Abreu <joabreu@synopsys.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-04-04 20:31:57 +08:00
* +----------------------+----------------------------------+------------------------------+
DRM: Fix an incorrectly formatted table The "supported input formats" table in dw_hdmi.h was incorrectly formatted, using "+" signs where "|" needs to be. That, in turn, causes the PDF build to fail. Fixes: def23aa7e982 ("drm: bridge: dw-hdmi: Switch to V4L bus format and encodings") Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170623140013.0703107a@lwn.net
2017-06-24 04:00:13 +08:00
* | YCbCr 4:2:0 10bits | ``MEDIA_BUS_FMT_UYYVYY10_0_5X30``| ``V4L2_YCBCR_ENC_601`` |
* | | | or ``V4L2_YCBCR_ENC_709`` |
drm: bridge: dw-hdmi: Switch to V4L bus format and encodings Switch code to use the newly introduced V4L bus formats IDs instead of custom defines. Also use the V4L encoding defines. Some display pipelines can only provide non-RBG input pixels to the HDMI TX Controller, this patch takes the pixel format from the plat_data if provided. Reviewed-by: Jose Abreu <joabreu@synopsys.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-04-04 20:31:57 +08:00
* +----------------------+----------------------------------+------------------------------+
DRM: Fix an incorrectly formatted table The "supported input formats" table in dw_hdmi.h was incorrectly formatted, using "+" signs where "|" needs to be. That, in turn, causes the PDF build to fail. Fixes: def23aa7e982 ("drm: bridge: dw-hdmi: Switch to V4L bus format and encodings") Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170623140013.0703107a@lwn.net
2017-06-24 04:00:13 +08:00
* | YCbCr 4:2:0 12bits | ``MEDIA_BUS_FMT_UYYVYY12_0_5X36``| ``V4L2_YCBCR_ENC_601`` |
* | | | or ``V4L2_YCBCR_ENC_709`` |
drm: bridge: dw-hdmi: Switch to V4L bus format and encodings Switch code to use the newly introduced V4L bus formats IDs instead of custom defines. Also use the V4L encoding defines. Some display pipelines can only provide non-RBG input pixels to the HDMI TX Controller, this patch takes the pixel format from the plat_data if provided. Reviewed-by: Jose Abreu <joabreu@synopsys.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-04-04 20:31:57 +08:00
* +----------------------+----------------------------------+------------------------------+
DRM: Fix an incorrectly formatted table The "supported input formats" table in dw_hdmi.h was incorrectly formatted, using "+" signs where "|" needs to be. That, in turn, causes the PDF build to fail. Fixes: def23aa7e982 ("drm: bridge: dw-hdmi: Switch to V4L bus format and encodings") Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170623140013.0703107a@lwn.net
2017-06-24 04:00:13 +08:00
* | YCbCr 4:2:0 16bits | ``MEDIA_BUS_FMT_UYYVYY16_0_5X48``| ``V4L2_YCBCR_ENC_601`` |
* | | | or ``V4L2_YCBCR_ENC_709`` |
drm: bridge: dw-hdmi: Switch to V4L bus format and encodings Switch code to use the newly introduced V4L bus formats IDs instead of custom defines. Also use the V4L encoding defines. Some display pipelines can only provide non-RBG input pixels to the HDMI TX Controller, this patch takes the pixel format from the plat_data if provided. Reviewed-by: Jose Abreu <joabreu@synopsys.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-04-04 20:31:57 +08:00
* +----------------------+----------------------------------+------------------------------+
*/
drm: imx: imx-hdmi: move imx-hdmi to bridge/dw_hdmi the original imx hdmi driver is under drm/imx/, which depends on imx-drm, so move the imx hdmi driver out to drm/bridge and rename it to dw_hdmi Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-12-05 14:26:31 +08:00
enum {
DW_HDMI_RES_8,
DW_HDMI_RES_10,
DW_HDMI_RES_12,
DW_HDMI_RES_MAX,
};
drm: bridge: dw-hdmi: Detect PHY type at runtime Detect the PHY type and use it to handle the PHY type-specific SVSRET signal. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170117082910.27023-17-laurent.pinchart+renesas@ideasonboard.com
2017-01-17 16:29:06 +08:00
enum dw_hdmi_phy_type {
DW_HDMI_PHY_DWC_HDMI_TX_PHY = 0x00,
DW_HDMI_PHY_DWC_MHL_PHY_HEAC = 0xb2,
DW_HDMI_PHY_DWC_MHL_PHY = 0xc2,
DW_HDMI_PHY_DWC_HDMI_3D_TX_PHY_HEAC = 0xe2,
DW_HDMI_PHY_DWC_HDMI_3D_TX_PHY = 0xf2,
DW_HDMI_PHY_DWC_HDMI20_TX_PHY = 0xf3,
DW_HDMI_PHY_VENDOR_PHY = 0xfe,
};
drm: imx: imx-hdmi: move imx-hdmi to bridge/dw_hdmi the original imx hdmi driver is under drm/imx/, which depends on imx-drm, so move the imx hdmi driver out to drm/bridge and rename it to dw_hdmi Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-12-05 14:26:31 +08:00
struct dw_hdmi_mpll_config {
unsigned long mpixelclock;
struct {
u16 cpce;
u16 gmp;
} res[DW_HDMI_RES_MAX];
};
struct dw_hdmi_curr_ctrl {
unsigned long mpixelclock;
u16 curr[DW_HDMI_RES_MAX];
};
drm: bridge/dw_hdmi: separate VLEVCTRL settting into platform driver Because of iMX6 & Rockchip have differnet mpll config parameter, the VLEVCTRL parameter would be different. In this case we should separate VLEVCTRL setting from the common dw_hdmi driver, config this parameter in platform driver(dw_hdmi-imx and dw_hdmi-rockchip) Signed-off-by: Yakir Yang <ykk@rock-chips.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-04-01 11:56:10 +08:00
struct dw_hdmi_phy_config {
drm: imx: imx-hdmi: move imx-hdmi to bridge/dw_hdmi the original imx hdmi driver is under drm/imx/, which depends on imx-drm, so move the imx hdmi driver out to drm/bridge and rename it to dw_hdmi Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-12-05 14:26:31 +08:00
unsigned long mpixelclock;
u16 sym_ctr; /*clock symbol and transmitter control*/
u16 term; /*transmission termination value*/
drm: bridge/dw_hdmi: separate VLEVCTRL settting into platform driver Because of iMX6 & Rockchip have differnet mpll config parameter, the VLEVCTRL parameter would be different. In this case we should separate VLEVCTRL setting from the common dw_hdmi driver, config this parameter in platform driver(dw_hdmi-imx and dw_hdmi-rockchip) Signed-off-by: Yakir Yang <ykk@rock-chips.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-04-01 11:56:10 +08:00
u16 vlev_ctr; /* voltage level control */
drm: imx: imx-hdmi: move imx-hdmi to bridge/dw_hdmi the original imx hdmi driver is under drm/imx/, which depends on imx-drm, so move the imx hdmi driver out to drm/bridge and rename it to dw_hdmi Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-12-05 14:26:31 +08:00
};
drm: bridge: dw-hdmi: Create PHY operations The HDMI TX controller support different PHYs whose programming interface can vary significantly, especially with vendor PHYs that are not provided by Synopsys. To support them, create a PHY operation structure that can be provided by the platform glue layer. The existing PHY handling code (limited to Synopsys PHY support) is refactored into a set of default PHY operations that are used automatically when the platform glue doesn't provide its own operations. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170305233615.11993-1-laurent.pinchart+renesas@ideasonboard.com
2017-03-06 07:36:15 +08:00
struct dw_hdmi_phy_ops {
int (*init)(struct dw_hdmi *hdmi, void *data,
struct drm_display_mode *mode);
void (*disable)(struct dw_hdmi *hdmi, void *data);
enum drm_connector_status (*read_hpd)(struct dw_hdmi *hdmi, void *data);
drm: bridge: dw-hdmi: Move HPD handling to PHY operations The HDMI TX controller support HPD and RXSENSE signaling from the PHY via it's STAT0 PHY interface, but some vendor PHYs can manage these signals independently from the controller, thus these STAT0 handling should be moved to PHY specific operations and become optional. The existing STAT0 HPD and RXSENSE handling code is refactored into a supplementaty set of default PHY operations that are used automatically when the platform glue doesn't provide its own operations. Reviewed-by: Jose Abreu <joabreu@synopsys.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: http://patchwork.freedesktop.org/patch/msgid/1491309119-24220-2-git-send-email-narmstrong@baylibre.com
2017-04-04 20:31:59 +08:00
void (*update_hpd)(struct dw_hdmi *hdmi, void *data,
bool force, bool disabled, bool rxsense);
void (*setup_hpd)(struct dw_hdmi *hdmi, void *data);
drm: bridge: dw-hdmi: Create PHY operations The HDMI TX controller support different PHYs whose programming interface can vary significantly, especially with vendor PHYs that are not provided by Synopsys. To support them, create a PHY operation structure that can be provided by the platform glue layer. The existing PHY handling code (limited to Synopsys PHY support) is refactored into a set of default PHY operations that are used automatically when the platform glue doesn't provide its own operations. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170305233615.11993-1-laurent.pinchart+renesas@ideasonboard.com
2017-03-06 07:36:15 +08:00
};
drm: imx: imx-hdmi: move imx-hdmi to bridge/dw_hdmi the original imx hdmi driver is under drm/imx/, which depends on imx-drm, so move the imx hdmi driver out to drm/bridge and rename it to dw_hdmi Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-12-05 14:26:31 +08:00
struct dw_hdmi_plat_data {
drm: bridge: dw-hdmi: Switch to regmap for register access The Synopsys Designware HDMI TX Controller does not enforce register access on platforms instanciating it. The current driver supports two different types of memory-mapped flat register access, but in order to support the Amlogic Meson SoCs integration, and provide a more generic way to handle all sorts of register mapping, switch the register access to use the regmap infrastructure. In the case of registers that are not flat memory-mapped or do not conform to the current driver implementation, a regmap struct can be given in the plat_data and be used at probe or bind. Since the AHB audio driver is only available with direct memory access, only allow the I2S audio driver to be registered is directly memory-mapped. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170303172007.26541-10-laurent.pinchart+renesas@ideasonboard.com
2017-03-04 01:20:06 +08:00
struct regmap *regm;
drm: bridge: dw-hdmi: Create PHY operations The HDMI TX controller support different PHYs whose programming interface can vary significantly, especially with vendor PHYs that are not provided by Synopsys. To support them, create a PHY operation structure that can be provided by the platform glue layer. The existing PHY handling code (limited to Synopsys PHY support) is refactored into a set of default PHY operations that are used automatically when the platform glue doesn't provide its own operations. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170305233615.11993-1-laurent.pinchart+renesas@ideasonboard.com
2017-03-06 07:36:15 +08:00
enum drm_mode_status (*mode_valid)(struct drm_connector *connector,
drm/bridge/synopsys: dw-hdmi: Use bridge->mode_valid() callback Now that we have a callback to check if bridge supports a given mode we can use it in Synopsys Designware HDMI bridge so that we restrict the number of probbed modes to the ones we can actually display. Also, there is no need to use mode_fixup() callback as mode_valid() will handle the mode validation. NOTE: I also had to change the pdata declaration of mode_valid custom callback so that the passed modes are const. I also changed in the platforms I found. Not even compiled it though. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Cc: Carlos Palminha <palminha@synopsys.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Archit Taneja <architt@codeaurora.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: David Airlie <airlied@linux.ie> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/3d8d449e4d13d2535fa292c75f5fa931de4a4fa8.1495720737.git.joabreu@synopsys.com
2017-05-25 22:19:19 +08:00
const struct drm_display_mode *mode);
drm: bridge: dw-hdmi: Switch to V4L bus format and encodings Switch code to use the newly introduced V4L bus formats IDs instead of custom defines. Also use the V4L encoding defines. Some display pipelines can only provide non-RBG input pixels to the HDMI TX Controller, this patch takes the pixel format from the plat_data if provided. Reviewed-by: Jose Abreu <joabreu@synopsys.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-04-04 20:31:57 +08:00
unsigned long input_bus_format;
unsigned long input_bus_encoding;
drm: bridge: dw-hdmi: Create PHY operations The HDMI TX controller support different PHYs whose programming interface can vary significantly, especially with vendor PHYs that are not provided by Synopsys. To support them, create a PHY operation structure that can be provided by the platform glue layer. The existing PHY handling code (limited to Synopsys PHY support) is refactored into a set of default PHY operations that are used automatically when the platform glue doesn't provide its own operations. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170305233615.11993-1-laurent.pinchart+renesas@ideasonboard.com
2017-03-06 07:36:15 +08:00
/* Vendor PHY support */
const struct dw_hdmi_phy_ops *phy_ops;
const char *phy_name;
void *phy_data;
drm/bridge: dw-hdmi: allow forcing vendor phy-type In some IP implementations the reading of the phy-type may be broken. One example are the Rockchip rk3228 and rk3328 socs that use a separate vendor-type phy from Innosilicon but still report the HDMI20_TX type. So allow the glue driver to force the vendor-phy for these cases. In the future it may be necessary to allow forcing other types, but for now we'll keep it simply to the case actually seen in the wild. changes in v3: - only allow forcing vendor type, as suggested by Laurent Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Zheng Yang <zhengyang@rock-chips.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180912124740.20343-2-heiko@sntech.de Link: https://patchwork.freedesktop.org/patch/msgid/20180912124740.20343-3-heiko@sntech.de
2018-09-12 20:47:35 +08:00
unsigned int phy_force_vendor;
drm: bridge: dw-hdmi: Create PHY operations The HDMI TX controller support different PHYs whose programming interface can vary significantly, especially with vendor PHYs that are not provided by Synopsys. To support them, create a PHY operation structure that can be provided by the platform glue layer. The existing PHY handling code (limited to Synopsys PHY support) is refactored into a set of default PHY operations that are used automatically when the platform glue doesn't provide its own operations. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170305233615.11993-1-laurent.pinchart+renesas@ideasonboard.com
2017-03-06 07:36:15 +08:00
/* Synopsys PHY support */
drm: imx: imx-hdmi: move imx-hdmi to bridge/dw_hdmi the original imx hdmi driver is under drm/imx/, which depends on imx-drm, so move the imx hdmi driver out to drm/bridge and rename it to dw_hdmi Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-12-05 14:26:31 +08:00
const struct dw_hdmi_mpll_config *mpll_cfg;
const struct dw_hdmi_curr_ctrl *cur_ctr;
drm: bridge/dw_hdmi: separate VLEVCTRL settting into platform driver Because of iMX6 & Rockchip have differnet mpll config parameter, the VLEVCTRL parameter would be different. In this case we should separate VLEVCTRL setting from the common dw_hdmi driver, config this parameter in platform driver(dw_hdmi-imx and dw_hdmi-rockchip) Signed-off-by: Yakir Yang <ykk@rock-chips.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-04-01 11:56:10 +08:00
const struct dw_hdmi_phy_config *phy_config;
drm: bridge: dw-hdmi: Add support for custom PHY configuration The DWC HDMI TX controller interfaces with a companion PHY. While Synopsys provides multiple standard PHYs, SoC vendors can also integrate a custom PHY. Modularize PHY configuration to support vendor PHYs through platform data. The existing PHY configuration code was originally written to support the DWC HDMI 3D TX PHY, and seems to be compatible with the DWC MLP PHY. The HDMI 2.0 PHY will require a separate configuration function. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170303172007.26541-8-laurent.pinchart+renesas@ideasonboard.com
2017-03-04 01:20:04 +08:00
int (*configure_phy)(struct dw_hdmi *hdmi,
const struct dw_hdmi_plat_data *pdata,
unsigned long mpixelclock);
drm: imx: imx-hdmi: move imx-hdmi to bridge/dw_hdmi the original imx hdmi driver is under drm/imx/, which depends on imx-drm, so move the imx hdmi driver out to drm/bridge and rename it to dw_hdmi Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-12-05 14:26:31 +08:00
};
drm/bridge/synopsys: dw-hdmi: don't clobber drvdata dw_hdmi shouldn't set drvdata since some drivers might need to store it's own data there. Rework dw_hdmi in a way to return struct dw_hdmi instead to store it in drvdata. This way drivers are responsible to store and pass structure when needed. Idea was taken from the following commit: 8242ecbd597d ("drm/bridge/synopsys: stop clobbering drvdata") Cc: p.zabel@pengutronix.de Cc: Laurent.pinchart@ideasonboard.com Cc: hjc@rock-chips.com Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180214200906.31509-6-jernej.skrabec@siol.net
2018-02-15 04:08:59 +08:00
struct dw_hdmi *dw_hdmi_probe(struct platform_device *pdev,
const struct dw_hdmi_plat_data *plat_data);
void dw_hdmi_remove(struct dw_hdmi *hdmi);
void dw_hdmi_unbind(struct dw_hdmi *hdmi);
struct dw_hdmi *dw_hdmi_bind(struct platform_device *pdev,
struct drm_encoder *encoder,
const struct dw_hdmi_plat_data *plat_data);
drm: bridge/dw_hdmi: introduce interface to setting sample rate Introduce dw_hdmi_set_sample_rate(), which allows us to configure the audio sample rate, setting the CTS/N values appropriately. Tested-by: Yakir Yang <ykk@rock-chips.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-03-27 20:50:58 +08:00
drm/bridge/synopsys: dw-hdmi: fix dw_hdmi_setup_rx_sense The dw_hdmi_setup_rx_sense exported function should not use struct device to recover the dw-hdmi context using drvdata, but take struct dw_hdmi directly like other exported functions. This caused a regression using Meson DRM on S905X since v4.17-rc1 : Internal error: Oops: 96000007 [#1] PREEMPT SMP [...] CPU: 0 PID: 124 Comm: irq/32-dw_hdmi_ Not tainted 4.17.0-rc7 #2 Hardware name: Libre Technology CC (DT) [...] pc : osq_lock+0x54/0x188 lr : __mutex_lock.isra.0+0x74/0x530 [...] Process irq/32-dw_hdmi_ (pid: 124, stack limit = 0x00000000adf418cb) Call trace: osq_lock+0x54/0x188 __mutex_lock_slowpath+0x10/0x18 mutex_lock+0x30/0x38 __dw_hdmi_setup_rx_sense+0x28/0x98 dw_hdmi_setup_rx_sense+0x10/0x18 dw_hdmi_top_thread_irq+0x2c/0x50 irq_thread_fn+0x28/0x68 irq_thread+0x10c/0x1a0 kthread+0x128/0x130 ret_from_fork+0x10/0x18 Code: 34000964 d00050a2 51000484 9135c042 (f864d844) ---[ end trace 945641e1fbbc07da ]--- note: irq/32-dw_hdmi_[124] exited with preempt_count 1 genirq: exiting task "irq/32-dw_hdmi_" (124) is an active IRQ thread (irq 32) Fixes: eea034af90c6 ("drm/bridge/synopsys: dw-hdmi: don't clobber drvdata") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Koen Kooi <koen@dominion.thruhere.net> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/1527673438-20643-1-git-send-email-narmstrong@baylibre.com
2018-05-30 17:43:58 +08:00
void dw_hdmi_setup_rx_sense(struct dw_hdmi *hdmi, bool hpd, bool rx_sense);
drm: bridge: dw-hdmi: Move HPD handling to PHY operations The HDMI TX controller support HPD and RXSENSE signaling from the PHY via it's STAT0 PHY interface, but some vendor PHYs can manage these signals independently from the controller, thus these STAT0 handling should be moved to PHY specific operations and become optional. The existing STAT0 HPD and RXSENSE handling code is refactored into a supplementaty set of default PHY operations that are used automatically when the platform glue doesn't provide its own operations. Reviewed-by: Jose Abreu <joabreu@synopsys.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: http://patchwork.freedesktop.org/patch/msgid/1491309119-24220-2-git-send-email-narmstrong@baylibre.com
2017-04-04 20:31:59 +08:00
drm: bridge/dw_hdmi: introduce interface to setting sample rate Introduce dw_hdmi_set_sample_rate(), which allows us to configure the audio sample rate, setting the CTS/N values appropriately. Tested-by: Yakir Yang <ykk@rock-chips.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-03-27 20:50:58 +08:00
void dw_hdmi_set_sample_rate(struct dw_hdmi *hdmi, unsigned int rate);
drm: bridge/dw_hdmi: introduce interfaces to enable and disable audio iMX6 devices suffer from an errata (ERR005174) where the audio FIFO can be emptied while it is partially full, resulting in misalignment of the audio samples. To prevent this, the errata workaround recommends writing N as zero until the audio FIFO has been loaded by DMA. Writing N=0 prevents the HDMI bridge from reading from the audio FIFO, effectively disabling audio. This means we need to provide the audio driver with a pair of functions to enable/disable audio. These are dw_hdmi_audio_enable() and dw_hdmi_audio_disable(). A spinlock is introduced to ensure that setting the CTS/N values can't race, ensuring that the audio driver calling the enable/disable functions (which are called in an atomic context) can't race with a modeset. Tested-by: Yakir Yang <ykk@rock-chips.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-03-27 20:59:58 +08:00
void dw_hdmi_audio_enable(struct dw_hdmi *hdmi);
void dw_hdmi_audio_disable(struct dw_hdmi *hdmi);
drm/bridge: dw-hdmi: Add SCDC and TMDS Scrambling support Add support for SCDC Setup for TMDS Clock > 3.4GHz and enable TMDS Scrambling when supported or mandatory. This patch also adds an helper to setup the control bit to support the high TMDS Bit Period/TMDS Clock-Period Ratio as required with TMDS Clock > 3.4GHz for HDMI2.0 3840x2160@60/50 modes. These changes were based on work done by Huicong Xu <xhc@rock-chips.com> and Nickey Yang <nickey.yang@rock-chips.com> to support HDMI2.0 modes on the Rockchip 4.4 BSP kernel at [1] [1] https://github.com/rockchip-linux/kernel/tree/release-4.4 Cc: Nickey Yang <nickey.yang@rock-chips.com> Cc: Huicong Xu <xhc@rock-chips.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1549022873-40549-2-git-send-email-narmstrong@baylibre.com
2019-02-01 20:07:46 +08:00
void dw_hdmi_set_high_tmds_clock_ratio(struct dw_hdmi *hdmi);
drm: bridge/dw_hdmi: introduce interface to setting sample rate Introduce dw_hdmi_set_sample_rate(), which allows us to configure the audio sample rate, setting the CTS/N values appropriately. Tested-by: Yakir Yang <ykk@rock-chips.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-03-27 20:50:58 +08:00
drm: bridge: dw-hdmi: Add support for custom PHY configuration The DWC HDMI TX controller interfaces with a companion PHY. While Synopsys provides multiple standard PHYs, SoC vendors can also integrate a custom PHY. Modularize PHY configuration to support vendor PHYs through platform data. The existing PHY configuration code was originally written to support the DWC HDMI 3D TX PHY, and seems to be compatible with the DWC MLP PHY. The HDMI 2.0 PHY will require a separate configuration function. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170303172007.26541-8-laurent.pinchart+renesas@ideasonboard.com
2017-03-04 01:20:04 +08:00
/* PHY configuration */
drm/bridge/synopsys: dw-hdmi: Export some PHY related functions Parts of PHY code could be useful also for custom PHYs. For example, Allwinner A83T has custom PHY which is probably Synopsys gen2 PHY with few additional memory mapped registers, so most of the Synopsys PHY related code could be reused. Functions exported here are actually not specific to Synopsys PHYs but to DWC HDMI controller PHY interface. This means that even if the PHY is completely custom, i.e. not designed by Synopsys, exported functions can be useful. Reviewed-by: Archit Taneja <architt@codeaurora.org> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180214200906.31509-5-jernej.skrabec@siol.net
2018-02-15 04:08:58 +08:00
void dw_hdmi_phy_i2c_set_addr(struct dw_hdmi *hdmi, u8 address);
drm: bridge: dw-hdmi: Add support for custom PHY configuration The DWC HDMI TX controller interfaces with a companion PHY. While Synopsys provides multiple standard PHYs, SoC vendors can also integrate a custom PHY. Modularize PHY configuration to support vendor PHYs through platform data. The existing PHY configuration code was originally written to support the DWC HDMI 3D TX PHY, and seems to be compatible with the DWC MLP PHY. The HDMI 2.0 PHY will require a separate configuration function. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170303172007.26541-8-laurent.pinchart+renesas@ideasonboard.com
2017-03-04 01:20:04 +08:00
void dw_hdmi_phy_i2c_write(struct dw_hdmi *hdmi, unsigned short data,
unsigned char addr);
drm/bridge/synopsys: dw-hdmi: Export some PHY related functions Parts of PHY code could be useful also for custom PHYs. For example, Allwinner A83T has custom PHY which is probably Synopsys gen2 PHY with few additional memory mapped registers, so most of the Synopsys PHY related code could be reused. Functions exported here are actually not specific to Synopsys PHYs but to DWC HDMI controller PHY interface. This means that even if the PHY is completely custom, i.e. not designed by Synopsys, exported functions can be useful. Reviewed-by: Archit Taneja <architt@codeaurora.org> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180214200906.31509-5-jernej.skrabec@siol.net
2018-02-15 04:08:58 +08:00
void dw_hdmi_phy_gen2_pddq(struct dw_hdmi *hdmi, u8 enable);
void dw_hdmi_phy_gen2_txpwron(struct dw_hdmi *hdmi, u8 enable);
void dw_hdmi_phy_reset(struct dw_hdmi *hdmi);
enum drm_connector_status dw_hdmi_phy_read_hpd(struct dw_hdmi *hdmi,
void *data);
void dw_hdmi_phy_update_hpd(struct dw_hdmi *hdmi, void *data,
bool force, bool disabled, bool rxsense);
void dw_hdmi_phy_setup_hpd(struct dw_hdmi *hdmi, void *data);
drm: imx: imx-hdmi: move imx-hdmi to bridge/dw_hdmi the original imx hdmi driver is under drm/imx/, which depends on imx-drm, so move the imx hdmi driver out to drm/bridge and rename it to dw_hdmi Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2014-12-05 14:26:31 +08:00
#endif /* __IMX_HDMI_H__ */