UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/media/i2c/Kconfig

600 lines
17 KiB
Plaintext
Raw Normal View History

[media] move i2c files into drivers/media/i2c Move ancillary I2C drivers into drivers/media/i2c, in order to better organize them. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-15 03:23:43 +08:00
#
# Multimedia Video device configuration
#
if VIDEO_V4L2
config VIDEO_IR_I2C
[media] Kconfig: merge all customise options into just one Instead of having 3 options to allow customizing the media sub-drivers (tuners, I2C drivers, frontends), merge all of them into just one. That simplifies the life for users, as they can just keep this untouched. Life for developers is also simpler, as there's now just one Kconfig item to remember, for the ancillary sub-drivers providing supports for chips that could change from one board design to another. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-21 01:48:02 +08:00
tristate "I2C module for IR" if !MEDIA_SUBDRV_AUTOSELECT
[media] move i2c files into drivers/media/i2c Move ancillary I2C drivers into drivers/media/i2c, in order to better organize them. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-15 03:23:43 +08:00
depends on I2C && RC_CORE
default y
---help---
Most boards have an IR chip directly connected via GPIO. However,
some video boards have the IR connected via I2C bus.
If your board doesn't have an I2C IR chip, you may disable this
option.
In doubt, say Y.
#
# Encoder / Decoder module configuration
#
menu "Encoders, decoders, sensors and other helper chips"
[media] Kconfig: merge all customise options into just one Instead of having 3 options to allow customizing the media sub-drivers (tuners, I2C drivers, frontends), merge all of them into just one. That simplifies the life for users, as they can just keep this untouched. Life for developers is also simpler, as there's now just one Kconfig item to remember, for the ancillary sub-drivers providing supports for chips that could change from one board design to another. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-21 01:48:02 +08:00
visible if !MEDIA_SUBDRV_AUTOSELECT
[media] move i2c files into drivers/media/i2c Move ancillary I2C drivers into drivers/media/i2c, in order to better organize them. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-15 03:23:43 +08:00
comment "Audio decoders, processors and mixers"
config VIDEO_TVAUDIO
tristate "Simple audio decoder chips"
depends on VIDEO_V4L2 && I2C
---help---
Support for several audio decoder chips found on some bt8xx boards:
Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300,
tea6320, tea6420, tda8425, ta8874z.
Microchip: pic16c54 based design on ProVideo PV951 board.
To compile this driver as a module, choose M here: the
module will be called tvaudio.
config VIDEO_TDA7432
tristate "Philips TDA7432 audio processor"
depends on VIDEO_V4L2 && I2C
---help---
Support for tda7432 audio decoder chip found on some bt8xx boards.
To compile this driver as a module, choose M here: the
module will be called tda7432.
config VIDEO_TDA9840
tristate "Philips TDA9840 audio processor"
depends on I2C
---help---
Support for tda9840 audio decoder chip found on some Zoran boards.
To compile this driver as a module, choose M here: the
module will be called tda9840.
config VIDEO_TEA6415C
tristate "Philips TEA6415C audio processor"
depends on I2C
---help---
Support for tea6415c audio decoder chip found on some bt8xx boards.
To compile this driver as a module, choose M here: the
module will be called tea6415c.
config VIDEO_TEA6420
tristate "Philips TEA6420 audio processor"
depends on I2C
---help---
Support for tea6420 audio decoder chip found on some bt8xx boards.
To compile this driver as a module, choose M here: the
module will be called tea6420.
config VIDEO_MSP3400
tristate "Micronas MSP34xx audio decoders"
depends on VIDEO_V4L2 && I2C
---help---
Support for the Micronas MSP34xx series of audio decoders.
To compile this driver as a module, choose M here: the
module will be called msp3400.
config VIDEO_CS5345
tristate "Cirrus Logic CS5345 audio ADC"
depends on VIDEO_V4L2 && I2C
---help---
Support for the Cirrus Logic CS5345 24-bit, 192 kHz
stereo A/D converter.
To compile this driver as a module, choose M here: the
module will be called cs5345.
config VIDEO_CS53L32A
tristate "Cirrus Logic CS53L32A audio ADC"
depends on VIDEO_V4L2 && I2C
---help---
Support for the Cirrus Logic CS53L32A low voltage
stereo A/D converter.
To compile this driver as a module, choose M here: the
module will be called cs53l32a.
config VIDEO_TLV320AIC23B
tristate "Texas Instruments TLV320AIC23B audio codec"
[media] v4l2: remove experimental tag from a number of old drivers A number of old drivers still had the experimental tag. Time to remove it. It concerns the following drivers: VIDEO_TLV320AIC23B USB_STKWEBCAM VIDEO_CX18 VIDEO_CX18_ALSA VIDEO_ZORAN_AVS6EYES DVB_USB_AF9005 MEDIA_TUNER_TEA5761 VIDEO_NOON010PC30 This decision was taken during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-03 21:16:34 +08:00
depends on VIDEO_V4L2 && I2C
[media] move i2c files into drivers/media/i2c Move ancillary I2C drivers into drivers/media/i2c, in order to better organize them. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-15 03:23:43 +08:00
---help---
Support for the Texas Instruments TLV320AIC23B audio codec.
To compile this driver as a module, choose M here: the
module will be called tlv320aic23b.
config VIDEO_WM8775
tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
depends on VIDEO_V4L2 && I2C
---help---
Support for the Wolfson Microelectronics WM8775 high
performance stereo A/D Converter with a 4 channel input mixer.
To compile this driver as a module, choose M here: the
module will be called wm8775.
config VIDEO_WM8739
tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
depends on VIDEO_V4L2 && I2C
---help---
Support for the Wolfson Microelectronics WM8739
stereo A/D Converter.
To compile this driver as a module, choose M here: the
module will be called wm8739.
config VIDEO_VP27SMPX
[media] sony-btf-mpx: the MPX driver for the sony BTF PAL/SECAM tuner The Sony BTF PG472Z has an internal MPX to deal with mono/stereo/bilingual audio. This is split off from the wis-sony-tuner driver that is part of the go7007 driver as it should be a separate i2c sub-device driver. The wis-sony-tuner is really three i2c devices: a standard tuner, a tda9887 compatible demodulator and this mpx. After this patch the wis-sony-tuner can be replaced by this driver and the standard tuner driver. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-22 22:13:58 +08:00
tristate "Panasonic VP27's internal MPX"
[media] move i2c files into drivers/media/i2c Move ancillary I2C drivers into drivers/media/i2c, in order to better organize them. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-15 03:23:43 +08:00
depends on VIDEO_V4L2 && I2C
---help---
Support for the internal MPX of the Panasonic VP27s tuner.
To compile this driver as a module, choose M here: the
module will be called vp27smpx.
[media] sony-btf-mpx: the MPX driver for the sony BTF PAL/SECAM tuner The Sony BTF PG472Z has an internal MPX to deal with mono/stereo/bilingual audio. This is split off from the wis-sony-tuner driver that is part of the go7007 driver as it should be a separate i2c sub-device driver. The wis-sony-tuner is really three i2c devices: a standard tuner, a tda9887 compatible demodulator and this mpx. After this patch the wis-sony-tuner can be replaced by this driver and the standard tuner driver. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-22 22:13:58 +08:00
config VIDEO_SONY_BTF_MPX
tristate "Sony BTF's internal MPX"
depends on VIDEO_V4L2 && I2C
help
Support for the internal MPX of the Sony BTF-PG472Z tuner.
To compile this driver as a module, choose M here: the
module will be called sony-btf-mpx.
[media] move i2c files into drivers/media/i2c Move ancillary I2C drivers into drivers/media/i2c, in order to better organize them. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-15 03:23:43 +08:00
comment "RDS decoders"
config VIDEO_SAA6588
tristate "SAA6588 Radio Chip RDS decoder support"
depends on VIDEO_V4L2 && I2C
help
Support for this Radio Data System (RDS) decoder. This allows
seeing radio station identification transmitted using this
standard.
To compile this driver as a module, choose M here: the
module will be called saa6588.
comment "Video decoders"
config VIDEO_ADV7180
tristate "Analog Devices ADV7180 decoder"
depends on VIDEO_V4L2 && I2C
---help---
Support for the Analog Devices ADV7180 video decoder.
To compile this driver as a module, choose M here: the
module will be called adv7180.
config VIDEO_ADV7183
tristate "Analog Devices ADV7183 decoder"
depends on VIDEO_V4L2 && I2C
---help---
V4l2 subdevice driver for the Analog Devices
ADV7183 video decoder.
To compile this driver as a module, choose M here: the
module will be called adv7183.
[media] adv7604: driver for the Analog Devices ADV7604 video decoder Initial version of this driver. The full datasheets are available from the Analog Devices website: http://ez.analog.com/docs/DOC-1545 Not all features of the receiver are supported by this driver for various reasons. Most notably: - No CEC support (the CEC API needs a lot more discussion) - Only port A of the four HDMI input ports is implemented (our hardware only uses that port) - No HDCP repeater support (we don't use that either) And since there are some 600-odd pages of datasheet for this single device, I'm sure that there are many more things missing, but this driver does work well for our hardware. Note that I am using the register addresses instead of register names: the datasheet containing the register descriptions is organized by register address. Using names would make the datasheet lookup very hard. An attempt was made to try and document what is being done when registers are used instead. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-07-18 16:45:16 +08:00
config VIDEO_ADV7604
tristate "Analog Devices ADV7604 decoder"
depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
---help---
Support for the Analog Devices ADV7604 video decoder.
This is a Analog Devices Component/Graphics Digitizer
with 4:1 Multiplexed HDMI Receiver.
To compile this driver as a module, choose M here: the
module will be called adv7604.
[media] move i2c files into drivers/media/i2c Move ancillary I2C drivers into drivers/media/i2c, in order to better organize them. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-15 03:23:43 +08:00
config VIDEO_BT819
tristate "BT819A VideoStream decoder"
depends on VIDEO_V4L2 && I2C
---help---
Support for BT819A video decoder.
To compile this driver as a module, choose M here: the
module will be called bt819.
config VIDEO_BT856
tristate "BT856 VideoStream decoder"
depends on VIDEO_V4L2 && I2C
---help---
Support for BT856 video decoder.
To compile this driver as a module, choose M here: the
module will be called bt856.
config VIDEO_BT866
tristate "BT866 VideoStream decoder"
depends on VIDEO_V4L2 && I2C
---help---
Support for BT866 video decoder.
To compile this driver as a module, choose M here: the
module will be called bt866.
config VIDEO_KS0127
tristate "KS0127 video decoder"
depends on VIDEO_V4L2 && I2C
---help---
Support for KS0127 video decoder.
This chip is used on AverMedia AVS6EYES Zoran-based MJPEG
cards.
To compile this driver as a module, choose M here: the
module will be called ks0127.
config VIDEO_SAA7110
tristate "Philips SAA7110 video decoder"
depends on VIDEO_V4L2 && I2C
---help---
Support for the Philips SAA7110 video decoders.
To compile this driver as a module, choose M here: the
module will be called saa7110.
config VIDEO_SAA711X
tristate "Philips SAA7111/3/4/5 video decoders"
depends on VIDEO_V4L2 && I2C
---help---
Support for the Philips SAA7111/3/4/5 video decoders.
To compile this driver as a module, choose M here: the
module will be called saa7115.
config VIDEO_SAA7191
tristate "Philips SAA7191 video decoder"
depends on VIDEO_V4L2 && I2C
---help---
Support for the Philips SAA7191 video decoder.
To compile this driver as a module, choose M here: the
module will be called saa7191.
config VIDEO_TVP514X
tristate "Texas Instruments TVP514x video decoder"
depends on VIDEO_V4L2 && I2C
---help---
This is a Video4Linux2 sensor-level driver for the TI TVP5146/47
decoder. It is currently working with the TI OMAP3 camera
controller.
To compile this driver as a module, choose M here: the
module will be called tvp514x.
config VIDEO_TVP5150
tristate "Texas Instruments TVP5150 video decoder"
depends on VIDEO_V4L2 && I2C
---help---
Support for the Texas Instruments TVP5150 video decoder.
To compile this driver as a module, choose M here: the
module will be called tvp5150.
config VIDEO_TVP7002
tristate "Texas Instruments TVP7002 video decoder"
depends on VIDEO_V4L2 && I2C
---help---
Support for the Texas Instruments TVP7002 video decoder.
To compile this driver as a module, choose M here: the
module will be called tvp7002.
config VIDEO_VPX3220
tristate "vpx3220a, vpx3216b & vpx3214c video decoders"
depends on VIDEO_V4L2 && I2C
---help---
Support for VPX322x video decoders.
To compile this driver as a module, choose M here: the
module will be called vpx3220.
comment "Video and audio decoders"
config VIDEO_SAA717X
tristate "Philips SAA7171/3/4 audio/video decoders"
depends on VIDEO_V4L2 && I2C
---help---
Support for the Philips SAA7171/3/4 audio/video decoders.
To compile this driver as a module, choose M here: the
module will be called saa717x.
source "drivers/media/i2c/cx25840/Kconfig"
comment "Video encoders"
config VIDEO_SAA7127
tristate "Philips SAA7127/9 digital video encoders"
depends on VIDEO_V4L2 && I2C
---help---
Support for the Philips SAA7127/9 digital video encoders.
To compile this driver as a module, choose M here: the
module will be called saa7127.
config VIDEO_SAA7185
tristate "Philips SAA7185 video encoder"
depends on VIDEO_V4L2 && I2C
---help---
Support for the Philips SAA7185 video encoder.
To compile this driver as a module, choose M here: the
module will be called saa7185.
config VIDEO_ADV7170
tristate "Analog Devices ADV7170 video encoder"
depends on VIDEO_V4L2 && I2C
---help---
Support for the Analog Devices ADV7170 video encoder driver
To compile this driver as a module, choose M here: the
module will be called adv7170.
config VIDEO_ADV7175
tristate "Analog Devices ADV7175 video encoder"
depends on VIDEO_V4L2 && I2C
---help---
Support for the Analog Devices ADV7175 video encoder driver
To compile this driver as a module, choose M here: the
module will be called adv7175.
config VIDEO_ADV7343
tristate "ADV7343 video encoder"
depends on I2C
help
Support for Analog Devices I2C bus based ADV7343 encoder.
To compile this driver as a module, choose M here: the
module will be called adv7343.
config VIDEO_ADV7393
tristate "ADV7393 video encoder"
depends on I2C
help
Support for Analog Devices I2C bus based ADV7393 encoder.
To compile this driver as a module, choose M here: the
module will be called adv7393.
[media] ad9389b: driver for the Analog Devices AD9389B video encoder Initial version of this driver. The full datasheets are available from the Analog Devices website: http://ez.analog.com/docs/DOC-1741 Not all features of the receiver are supported by this driver for various reasons. Most notably: - No CEC support (the CEC API needs a lot more discussion) - No HDCP repeater support (we don't use that either) I'm sure that there are more things missing, but this driver does work well for our hardware. Note that I am using the register addresses instead of register names: the datasheet containing the register descriptions is organized by register address. Using names would make the datasheet lookup very hard. An attempt was made to try and document what is being done when registers are used instead. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-07-18 16:46:46 +08:00
config VIDEO_AD9389B
tristate "Analog Devices AD9389B encoder"
depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
---help---
Support for the Analog Devices AD9389B video encoder.
This is a Analog Devices HDMI transmitter.
To compile this driver as a module, choose M here: the
module will be called ad9389b.
[media] move i2c files into drivers/media/i2c Move ancillary I2C drivers into drivers/media/i2c, in order to better organize them. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-15 03:23:43 +08:00
config VIDEO_AK881X
tristate "AK8813/AK8814 video encoders"
depends on I2C
help
Video output driver for AKM AK8813 and AK8814 TV encoders
comment "Camera sensor devices"
config VIDEO_APTINA_PLL
tristate
config VIDEO_SMIAPP_PLL
tristate
[media] ov7640: add new ov7640 driver This based on the wis-ov7640.c driver that's part of the go7007 driver. It has been converted to a v4l subdev driver by Pete Eberlein, and I made additional cleanups. Based on work by: Pete Eberlein <pete@sensoray.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-03-09 18:09:18 +08:00
config VIDEO_OV7640
tristate "OmniVision OV7640 sensor support"
depends on I2C && VIDEO_V4L2
depends on MEDIA_CAMERA_SUPPORT
---help---
This is a Video4Linux2 sensor-level driver for the OmniVision
OV7640 camera.
To compile this driver as a module, choose M here: the
module will be called ov7640.
[media] move i2c files into drivers/media/i2c Move ancillary I2C drivers into drivers/media/i2c, in order to better organize them. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-15 03:23:43 +08:00
config VIDEO_OV7670
tristate "OmniVision OV7670 sensor support"
depends on I2C && VIDEO_V4L2
depends on MEDIA_CAMERA_SUPPORT
---help---
This is a Video4Linux2 sensor-level driver for the OmniVision
OV7670 VGA camera. It currently only works with the M88ALP01
controller.
[media] V4L: Add driver for OV9650/52 image sensors This patch adds V4L2 sub-device driver for OV9650/OV9652 image sensors. The driver exposes following V4L2 controls: - auto/manual exposure, - auto/manual white balance, - auto/manual gain, - brightness, saturation, sharpness, - horizontal/vertical flip, - color bar test pattern, - banding filter (power line frequency). Frame rate can be configured with g/s_frame_interval pad level ops. Supported resolution are only: SXGA, VGA, QVGA. Signed-off-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-12-27 02:50:03 +08:00
config VIDEO_OV9650
tristate "OmniVision OV9650/OV9652 sensor support"
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
---help---
This is a V4L2 sensor-level driver for the Omnivision
OV9650 and OV9652 camera sensors.
[media] move i2c files into drivers/media/i2c Move ancillary I2C drivers into drivers/media/i2c, in order to better organize them. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-15 03:23:43 +08:00
config VIDEO_VS6624
tristate "ST VS6624 sensor support"
depends on VIDEO_V4L2 && I2C
depends on MEDIA_CAMERA_SUPPORT
---help---
This is a Video4Linux2 sensor-level driver for the ST VS6624
camera.
To compile this driver as a module, choose M here: the
module will be called vs6624.
config VIDEO_MT9M032
tristate "MT9M032 camera sensor support"
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
depends on MEDIA_CAMERA_SUPPORT
select VIDEO_APTINA_PLL
---help---
This driver supports MT9M032 camera sensors from Aptina, monochrome
models only.
config VIDEO_MT9P031
tristate "Aptina MT9P031 support"
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
depends on MEDIA_CAMERA_SUPPORT
select VIDEO_APTINA_PLL
---help---
This is a Video4Linux2 sensor-level driver for the Aptina
(Micron) mt9p031 5 Mpixel camera.
config VIDEO_MT9T001
tristate "Aptina MT9T001 support"
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
depends on MEDIA_CAMERA_SUPPORT
---help---
This is a Video4Linux2 sensor-level driver for the Aptina
(Micron) mt0t001 3 Mpixel camera.
config VIDEO_MT9V011
tristate "Micron mt9v011 sensor support"
depends on I2C && VIDEO_V4L2
depends on MEDIA_CAMERA_SUPPORT
---help---
This is a Video4Linux2 sensor-level driver for the Micron
mt0v011 1.3 Mpixel camera. It currently only works with the
em28xx driver.
config VIDEO_MT9V032
tristate "Micron MT9V032 sensor support"
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
depends on MEDIA_CAMERA_SUPPORT
---help---
This is a Video4Linux2 sensor-level driver for the Micron
MT9V032 752x480 CMOS sensor.
config VIDEO_TCM825X
tristate "TCM825x camera sensor support"
[media] v4l: Don't compile v4l2-int-device unless really needed Add a configuration option for v4l2-int-device so it is only compiled when necessary, which is only by omap24xxcam and tcm825x drivers. Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-01-06 05:56:10 +08:00
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_INT_DEVICE
[media] move i2c files into drivers/media/i2c Move ancillary I2C drivers into drivers/media/i2c, in order to better organize them. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-15 03:23:43 +08:00
depends on MEDIA_CAMERA_SUPPORT
---help---
This is a driver for the Toshiba TCM825x VGA camera sensor.
It is used for example in Nokia N800.
config VIDEO_SR030PC30
tristate "Siliconfile SR030PC30 sensor support"
depends on I2C && VIDEO_V4L2
depends on MEDIA_CAMERA_SUPPORT
---help---
This driver supports SR030PC30 VGA camera from Siliconfile
config VIDEO_NOON010PC30
tristate "Siliconfile NOON010PC30 sensor support"
[media] v4l2: remove experimental tag from a number of old drivers A number of old drivers still had the experimental tag. Time to remove it. It concerns the following drivers: VIDEO_TLV320AIC23B USB_STKWEBCAM VIDEO_CX18 VIDEO_CX18_ALSA VIDEO_ZORAN_AVS6EYES DVB_USB_AF9005 MEDIA_TUNER_TEA5761 VIDEO_NOON010PC30 This decision was taken during the 2012 Media Workshop. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-03 21:16:34 +08:00
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
[media] move i2c files into drivers/media/i2c Move ancillary I2C drivers into drivers/media/i2c, in order to better organize them. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-15 03:23:43 +08:00
depends on MEDIA_CAMERA_SUPPORT
---help---
This driver supports NOON010PC30 CIF camera from Siliconfile
source "drivers/media/i2c/m5mols/Kconfig"
config VIDEO_S5K6AA
tristate "Samsung S5K6AAFX sensor support"
depends on MEDIA_CAMERA_SUPPORT
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
---help---
This is a V4L2 sensor-level driver for Samsung S5K6AA(FX) 1.3M
camera sensor with an embedded SoC image signal processor.
[media] Add v4l2 subdev driver for S5K4ECGX sensor This patch adds driver for Samsung S5K4ECGX image sensor with an embedded SoC ISP. The driver only implements preview operation mode and still capture (snapshot) and face detection features are missing now. Following controls are supported: contrast, saturation, brightness, sharpness. Signed-off-by: Sangwook Lee <sangwook.lee@linaro.org> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-09-13 18:02:14 +08:00
config VIDEO_S5K4ECGX
tristate "Samsung S5K4ECGX sensor support"
depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
---help---
This is a V4L2 sensor-level driver for Samsung S5K4ECGX 5M
camera sensor with an embedded SoC image signal processor.
[media] move i2c files into drivers/media/i2c Move ancillary I2C drivers into drivers/media/i2c, in order to better organize them. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-15 03:23:43 +08:00
source "drivers/media/i2c/smiapp/Kconfig"
[media] V4L: Add S5C73M3 camera driver Add driver for S5C73M3 image sensor. The driver exposes the sensor as two subdevs: pure sensor and output interface. Two subdev architecture supports interleaved UYVY/JPEG image format with separate frame size for both sub-formats, there is a spearate pad for each sub-format. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-11-22 22:39:18 +08:00
config VIDEO_S5C73M3
tristate "Samsung S5C73M3 sensor support"
depends on I2C && SPI && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
---help---
This is a V4L2 sensor-level driver for Samsung S5C73M3
8 Mpixel camera.
[media] move i2c files into drivers/media/i2c Move ancillary I2C drivers into drivers/media/i2c, in order to better organize them. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-15 03:23:43 +08:00
comment "Flash devices"
config VIDEO_ADP1653
tristate "ADP1653 flash support"
depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
depends on MEDIA_CAMERA_SUPPORT
---help---
This is a driver for the ADP1653 flash controller. It is used for
example in Nokia N900.
config VIDEO_AS3645A
tristate "AS3645A flash driver support"
depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
depends on MEDIA_CAMERA_SUPPORT
---help---
This is a driver for the AS3645A and LM3555 flash controllers. It has
build in control for flash, torch and indicator LEDs.
comment "Video improvement chips"
config VIDEO_UPD64031A
tristate "NEC Electronics uPD64031A Ghost Reduction"
depends on VIDEO_V4L2 && I2C
---help---
Support for the NEC Electronics uPD64031A Ghost Reduction
video chip. It is most often found in NTSC TV cards made for
Japan and is used to reduce the 'ghosting' effect that can
be present in analog TV broadcasts.
To compile this driver as a module, choose M here: the
module will be called upd64031a.
config VIDEO_UPD64083
tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
depends on VIDEO_V4L2 && I2C
---help---
Support for the NEC Electronics uPD64083 3-Dimensional Y/C
separation video chip. It is used to improve the quality of
the colors of a composite signal.
To compile this driver as a module, choose M here: the
module will be called upd64083.
comment "Miscelaneous helper chips"
config VIDEO_THS7303
[media] media: ths7353: add support for ths7353 video amplifier The patch adds support for THS7353 video amplifier. The the THS7353 amplifier is very much similar to the existing THS7303 video amplifier driver. This patch appropriately makes changes to the existing ths7303 driver and adds support for the THS7353. This patch also adds V4L2_IDENT_THS7353 for the THS7353 chip and appropriate changes to Kconfig file for building. Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Martin Bugge <marbugge@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-18 18:56:41 +08:00
tristate "THS7303/53 Video Amplifier"
depends on VIDEO_V4L2 && I2C
[media] move i2c files into drivers/media/i2c Move ancillary I2C drivers into drivers/media/i2c, in order to better organize them. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-15 03:23:43 +08:00
help
[media] media: ths7353: add support for ths7353 video amplifier The patch adds support for THS7353 video amplifier. The the THS7353 amplifier is very much similar to the existing THS7303 video amplifier driver. This patch appropriately makes changes to the existing ths7303 driver and adds support for the THS7353. This patch also adds V4L2_IDENT_THS7353 for the THS7353 chip and appropriate changes to Kconfig file for building. Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Martin Bugge <marbugge@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-02-18 18:56:41 +08:00
Support for TI THS7303/53 video amplifier
[media] move i2c files into drivers/media/i2c Move ancillary I2C drivers into drivers/media/i2c, in order to better organize them. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-15 03:23:43 +08:00
To compile this driver as a module, choose M here: the
module will be called ths7303.
config VIDEO_M52790
tristate "Mitsubishi M52790 A/V switch"
depends on VIDEO_V4L2 && I2C
---help---
Support for the Mitsubishi M52790 A/V switch.
To compile this driver as a module, choose M here: the
module will be called m52790.
[media] Kconfig: merge all customise options into just one Instead of having 3 options to allow customizing the media sub-drivers (tuners, I2C drivers, frontends), merge all of them into just one. That simplifies the life for users, as they can just keep this untouched. Life for developers is also simpler, as there's now just one Kconfig item to remember, for the ancillary sub-drivers providing supports for chips that could change from one board design to another. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-21 01:48:02 +08:00
endmenu
[media] Add missing help for some menuconfig items Help was missing during some items reorganization. Add them. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-21 19:16:28 +08:00
[media] Kconfig: merge all customise options into just one Instead of having 3 options to allow customizing the media sub-drivers (tuners, I2C drivers, frontends), merge all of them into just one. That simplifies the life for users, as they can just keep this untouched. Life for developers is also simpler, as there's now just one Kconfig item to remember, for the ancillary sub-drivers providing supports for chips that could change from one board design to another. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-21 01:48:02 +08:00
menu "Sensors used on soc_camera driver"
[media] move i2c files into drivers/media/i2c Move ancillary I2C drivers into drivers/media/i2c, in order to better organize them. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-15 03:23:43 +08:00
[media] move soc_camera i2c drivers into its own dir Move all soc_camera i2c drivers into drivers/media/i2c/soc_camera/. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-15 04:15:52 +08:00
if SOC_CAMERA
source "drivers/media/i2c/soc_camera/Kconfig"
endif
[media] move i2c files into drivers/media/i2c Move ancillary I2C drivers into drivers/media/i2c, in order to better organize them. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-15 03:23:43 +08:00
endmenu
[media] Kconfig: merge all customise options into just one Instead of having 3 options to allow customizing the media sub-drivers (tuners, I2C drivers, frontends), merge all of them into just one. That simplifies the life for users, as they can just keep this untouched. Life for developers is also simpler, as there's now just one Kconfig item to remember, for the ancillary sub-drivers providing supports for chips that could change from one board design to another. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-21 01:48:02 +08:00
[media] move i2c files into drivers/media/i2c Move ancillary I2C drivers into drivers/media/i2c, in order to better organize them. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-08-15 03:23:43 +08:00
endif