OpenCloudOS-Kernel/drivers/mmc/core/pwrseq_simple.c

165 lines
4.1 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2014 Linaro Ltd
*
* Author: Ulf Hansson <ulf.hansson@linaro.org>
*
* Simple MMC power sequence management
*/
#include <linux/clk.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/gpio/consumer.h>
#include <linux/delay.h>
#include <linux/property.h>
#include <linux/mmc/host.h>
#include "pwrseq.h"
struct mmc_pwrseq_simple {
struct mmc_pwrseq pwrseq;
bool clk_enabled;
u32 post_power_on_delay_ms;
u32 power_off_delay_us;
struct clk *ext_clk;
struct gpio_descs *reset_gpios;
};
#define to_pwrseq_simple(p) container_of(p, struct mmc_pwrseq_simple, pwrseq)
static void mmc_pwrseq_simple_set_gpios_value(struct mmc_pwrseq_simple *pwrseq,
int value)
{
struct gpio_descs *reset_gpios = pwrseq->reset_gpios;
if (!IS_ERR(reset_gpios)) {
unsigned long *values;
int nvalues = reset_gpios->ndescs;
values = bitmap_alloc(nvalues, GFP_KERNEL);
if (!values)
return;
if (value)
bitmap_fill(values, nvalues);
else
bitmap_zero(values, nvalues);
gpiolib: Pass bitmaps, not integer arrays, to get/set array Most users of get/set array functions iterate consecutive bits of data, usually a single integer, while processing array of results obtained from, or building an array of values to be passed to those functions. Save time wasted on those iterations by changing the functions' API to accept bitmaps. All current users are updated as well. More benefits from the change are expected as soon as planned support for accepting/passing those bitmaps directly from/to respective GPIO chip callbacks if applicable is implemented. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com> Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Cc: Lukas Wunner <lukas@wunner.de> Cc: Peter Korsgaard <peter.korsgaard@barco.com> Cc: Peter Rosin <peda@axentia.se> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Rojhalat Ibrahim <imr@rtschenk.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-06 05:50:05 +08:00
gpiod_set_array_value_cansleep(nvalues, reset_gpios->desc,
gpiolib: Pass array info to get/set array functions In order to make use of array info obtained from gpiod_get_array() and speed up processing of arrays matching single GPIO chip layout, that information must be passed to get/set array functions. Extend the functions' API with that additional parameter and update all users. Pass NULL if a user builds an array itself from single GPIOs. Cc: Jonathan Corbet <corbet@lwn.net> Cc: Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Cc: Lukas Wunner <lukas@wunner.de> Cc: Peter Korsgaard <peter.korsgaard@barco.com> Cc: Peter Rosin <peda@axentia.se> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Rojhalat Ibrahim <imr@rtschenk.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Michael Hennerich <Michael.Hennerich@analog.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-06 05:50:07 +08:00
reset_gpios->info, values);
kfree(values);
}
}
static void mmc_pwrseq_simple_pre_power_on(struct mmc_host *host)
{
struct mmc_pwrseq_simple *pwrseq = to_pwrseq_simple(host->pwrseq);
if (!IS_ERR(pwrseq->ext_clk) && !pwrseq->clk_enabled) {
clk_prepare_enable(pwrseq->ext_clk);
pwrseq->clk_enabled = true;
}
mmc_pwrseq_simple_set_gpios_value(pwrseq, 1);
}
static void mmc_pwrseq_simple_post_power_on(struct mmc_host *host)
{
struct mmc_pwrseq_simple *pwrseq = to_pwrseq_simple(host->pwrseq);
mmc_pwrseq_simple_set_gpios_value(pwrseq, 0);
if (pwrseq->post_power_on_delay_ms)
msleep(pwrseq->post_power_on_delay_ms);
}
static void mmc_pwrseq_simple_power_off(struct mmc_host *host)
{
struct mmc_pwrseq_simple *pwrseq = to_pwrseq_simple(host->pwrseq);
mmc_pwrseq_simple_set_gpios_value(pwrseq, 1);
if (pwrseq->power_off_delay_us)
usleep_range(pwrseq->power_off_delay_us,
2 * pwrseq->power_off_delay_us);
if (!IS_ERR(pwrseq->ext_clk) && pwrseq->clk_enabled) {
clk_disable_unprepare(pwrseq->ext_clk);
pwrseq->clk_enabled = false;
}
}
static const struct mmc_pwrseq_ops mmc_pwrseq_simple_ops = {
.pre_power_on = mmc_pwrseq_simple_pre_power_on,
.post_power_on = mmc_pwrseq_simple_post_power_on,
.power_off = mmc_pwrseq_simple_power_off,
};
static const struct of_device_id mmc_pwrseq_simple_of_match[] = {
{ .compatible = "mmc-pwrseq-simple",},
{/* sentinel */},
};
MODULE_DEVICE_TABLE(of, mmc_pwrseq_simple_of_match);
static int mmc_pwrseq_simple_probe(struct platform_device *pdev)
{
struct mmc_pwrseq_simple *pwrseq;
struct device *dev = &pdev->dev;
pwrseq = devm_kzalloc(dev, sizeof(*pwrseq), GFP_KERNEL);
if (!pwrseq)
return -ENOMEM;
pwrseq->ext_clk = devm_clk_get(dev, "ext_clock");
if (IS_ERR(pwrseq->ext_clk) && PTR_ERR(pwrseq->ext_clk) != -ENOENT)
return PTR_ERR(pwrseq->ext_clk);
pwrseq->reset_gpios = devm_gpiod_get_array(dev, "reset",
GPIOD_OUT_HIGH);
if (IS_ERR(pwrseq->reset_gpios) &&
PTR_ERR(pwrseq->reset_gpios) != -ENOENT &&
PTR_ERR(pwrseq->reset_gpios) != -ENOSYS) {
return PTR_ERR(pwrseq->reset_gpios);
}
device_property_read_u32(dev, "post-power-on-delay-ms",
&pwrseq->post_power_on_delay_ms);
device_property_read_u32(dev, "power-off-delay-us",
&pwrseq->power_off_delay_us);
pwrseq->pwrseq.dev = dev;
pwrseq->pwrseq.ops = &mmc_pwrseq_simple_ops;
pwrseq->pwrseq.owner = THIS_MODULE;
platform_set_drvdata(pdev, pwrseq);
return mmc_pwrseq_register(&pwrseq->pwrseq);
}
static int mmc_pwrseq_simple_remove(struct platform_device *pdev)
{
struct mmc_pwrseq_simple *pwrseq = platform_get_drvdata(pdev);
mmc_pwrseq_unregister(&pwrseq->pwrseq);
return 0;
}
static struct platform_driver mmc_pwrseq_simple_driver = {
.probe = mmc_pwrseq_simple_probe,
.remove = mmc_pwrseq_simple_remove,
.driver = {
.name = "pwrseq_simple",
.of_match_table = mmc_pwrseq_simple_of_match,
},
};
module_platform_driver(mmc_pwrseq_simple_driver);
MODULE_LICENSE("GPL v2");