OpenCloudOS-Kernel/drivers/base/platform.c

1481 lines
37 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* platform.c - platform 'pseudo' bus for legacy devices
*
* Copyright (c) 2002-3 Patrick Mochel
* Copyright (c) 2002-3 Open Source Development Labs
*
* Please see Documentation/driver-model/platform.txt for more
* information.
*/
#include <linux/string.h>
#include <linux/platform_device.h>
#include <linux/of_device.h>
of/irq: do irq resolution in platform_get_irq Currently we get the following kind of errors if we try to use interrupt phandles to irqchips that have not yet initialized: irq: no irq domain found for /ocp/pinmux@48002030 ! ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at drivers/of/platform.c:171 of_device_alloc+0x144/0x184() Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.12.0-00038-g42a9708 #1012 (show_stack+0x14/0x1c) (dump_stack+0x6c/0xa0) (warn_slowpath_common+0x64/0x84) (warn_slowpath_null+0x1c/0x24) (of_device_alloc+0x144/0x184) (of_platform_device_create_pdata+0x44/0x9c) (of_platform_bus_create+0xd0/0x170) (of_platform_bus_create+0x12c/0x170) (of_platform_populate+0x60/0x98) This is because we're wrongly trying to populate resources that are not yet available. It's perfectly valid to create irqchips dynamically, so let's fix up the issue by resolving the interrupt resources when platform_get_irq is called. And then we also need to accept the fact that some irqdomains do not exist that early on, and only get initialized later on. So we can make the current WARN_ON into just into a pr_debug(). We still attempt to populate irq resources when we create the devices. This allows current drivers which don't use platform_get_irq to continue to function. Once all drivers are fixed, this code can be removed. Suggested-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Tony Lindgren <tony@atomide.com> Cc: stable@vger.kernel.org # v3.10+ Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-04-24 06:57:41 +08:00
#include <linux/of_irq.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/dma-mapping.h>
mm: remove include/linux/bootmem.h Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31 06:09:49 +08:00
#include <linux/memblock.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/pm_runtime.h>
#include <linux/pm_domain.h>
#include <linux/idr.h>
#include <linux/acpi.h>
#include <linux/clk/clk-conf.h>
#include <linux/limits.h>
#include <linux/property.h>
drivers/base/platform.c: kmemleak ignore a known leak unreferenced object 0xffff808ec6dc5a80 (size 128): comm "swapper/0", pid 1, jiffies 4294938063 (age 2560.530s) hex dump (first 32 bytes): ff ff ff ff 00 00 00 00 6b 6b 6b 6b 6b 6b 6b 6b ........kkkkkkkk 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk backtrace: [<00000000476dcf8c>] kmem_cache_alloc_trace+0x430/0x500 [<000000004f708d37>] platform_device_register_full+0xbc/0x1e8 [<000000006c2a7ec7>] acpi_create_platform_device+0x370/0x450 [<00000000ef135642>] acpi_default_enumeration+0x34/0x78 [<000000003bd9a052>] acpi_bus_attach+0x2dc/0x3e0 [<000000003cf4f7f2>] acpi_bus_attach+0x108/0x3e0 [<000000003cf4f7f2>] acpi_bus_attach+0x108/0x3e0 [<000000002968643e>] acpi_bus_scan+0xb0/0x110 [<0000000010dd0bd7>] acpi_scan_init+0x1a8/0x410 [<00000000965b3c5a>] acpi_init+0x408/0x49c [<00000000ed4b9fe2>] do_one_initcall+0x178/0x7f4 [<00000000a5ac5a74>] kernel_init_freeable+0x9d4/0xa9c [<0000000070ea6c15>] kernel_init+0x18/0x138 [<00000000fb8fff06>] ret_from_fork+0x10/0x1c [<0000000041273a0d>] 0xffffffffffffffff Then, faddr2line pointed out this line, /* * This memory isn't freed when the device is put, * I don't have a nice idea for that though. Conceptually * dma_mask in struct device should not be a pointer. * See http://thread.gmane.org/gmane.linux.kernel.pci/9081 */ pdev->dev.dma_mask = kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL); Since this leak has existed for more than 8 years and it does not reference other parts of the memory, let kmemleak ignore it, so users don't need to waste time reporting this in the future. Link: http://lkml.kernel.org/r/20181206160751.36211-1-cai@gmx.us Signed-off-by: Qian Cai <cai@gmx.us> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 07:29:05 +08:00
#include <linux/kmemleak.h>
[PATCH] drivers/base - fix sparse warnings There are a number of sparse warnings from the latest sparse snapshot being generated from the drivers/base build. The main culprits are due to the initialisation functions not being declared in a header file. Also, the firmware.c file should include <linux/device.h> to get the prototype of firmware_register() and firmware_unregister(). This patch moves the init function declerations from the init.c file to the base.h, and ensures it is included in all the relevant c sources. It also adds <linux/device.h> to the included headers for firmware.c. The patch does not solve all the sparse errors generated, but reduces the count significantly. drivers/base/core.c:161:1: warning: symbol 'devices_subsys' was not declared. Should it be static? drivers/base/core.c:417:12: warning: symbol 'devices_init' was not declared. Should it be static? drivers/base/sys.c:253:6: warning: symbol 'sysdev_shutdown' was not declared. Should it be static? drivers/base/sys.c:326:5: warning: symbol 'sysdev_suspend' was not declared. Should it be static? drivers/base/sys.c:428:5: warning: symbol 'sysdev_resume' was not declared. Should it be static? drivers/base/sys.c:450:12: warning: symbol 'system_bus_init' was not declared. Should it be static? drivers/base/bus.c:133:1: warning: symbol 'bus_subsys' was not declared. Should it be static? drivers/base/bus.c:667:12: warning: symbol 'buses_init' was not declared. Should it be static? drivers/base/class.c:759:12: warning: symbol 'classes_init' was not declared. Should it be static? drivers/base/platform.c:313:12: warning: symbol 'platform_bus_init' was not declared. Should it be static? drivers/base/cpu.c:110:12: warning: symbol 'cpu_dev_init' was not declared. Should it be static? drivers/base/firmware.c:17:5: warning: symbol 'firmware_register' was not declared. Should it be static? drivers/base/firmware.c:23:6: warning: symbol 'firmware_unregister' was not declared. Should it be static? drivers/base/firmware.c:28:12: warning: symbol 'firmware_init' was not declared. Should it be static? drivers/base/init.c:28:13: warning: symbol 'driver_init' was not declared. Should it be static? drivers/base/dmapool.c:174:10: warning: implicit cast from nocast type drivers/base/attribute_container.c:439:1: warning: symbol 'attribute_container_init' was not declared. Should it be static? drivers/base/power/runtime.c:76:6: warning: symbol 'dpm_set_power_state' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-14 00:54:41 +08:00
#include "base.h"
#include "power/power.h"
[PATCH] drivers/base - fix sparse warnings There are a number of sparse warnings from the latest sparse snapshot being generated from the drivers/base build. The main culprits are due to the initialisation functions not being declared in a header file. Also, the firmware.c file should include <linux/device.h> to get the prototype of firmware_register() and firmware_unregister(). This patch moves the init function declerations from the init.c file to the base.h, and ensures it is included in all the relevant c sources. It also adds <linux/device.h> to the included headers for firmware.c. The patch does not solve all the sparse errors generated, but reduces the count significantly. drivers/base/core.c:161:1: warning: symbol 'devices_subsys' was not declared. Should it be static? drivers/base/core.c:417:12: warning: symbol 'devices_init' was not declared. Should it be static? drivers/base/sys.c:253:6: warning: symbol 'sysdev_shutdown' was not declared. Should it be static? drivers/base/sys.c:326:5: warning: symbol 'sysdev_suspend' was not declared. Should it be static? drivers/base/sys.c:428:5: warning: symbol 'sysdev_resume' was not declared. Should it be static? drivers/base/sys.c:450:12: warning: symbol 'system_bus_init' was not declared. Should it be static? drivers/base/bus.c:133:1: warning: symbol 'bus_subsys' was not declared. Should it be static? drivers/base/bus.c:667:12: warning: symbol 'buses_init' was not declared. Should it be static? drivers/base/class.c:759:12: warning: symbol 'classes_init' was not declared. Should it be static? drivers/base/platform.c:313:12: warning: symbol 'platform_bus_init' was not declared. Should it be static? drivers/base/cpu.c:110:12: warning: symbol 'cpu_dev_init' was not declared. Should it be static? drivers/base/firmware.c:17:5: warning: symbol 'firmware_register' was not declared. Should it be static? drivers/base/firmware.c:23:6: warning: symbol 'firmware_unregister' was not declared. Should it be static? drivers/base/firmware.c:28:12: warning: symbol 'firmware_init' was not declared. Should it be static? drivers/base/init.c:28:13: warning: symbol 'driver_init' was not declared. Should it be static? drivers/base/dmapool.c:174:10: warning: implicit cast from nocast type drivers/base/attribute_container.c:439:1: warning: symbol 'attribute_container_init' was not declared. Should it be static? drivers/base/power/runtime.c:76:6: warning: symbol 'dpm_set_power_state' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-14 00:54:41 +08:00
/* For automatically allocated device IDs */
static DEFINE_IDA(platform_devid_ida);
struct device platform_bus = {
.init_name = "platform",
};
EXPORT_SYMBOL_GPL(platform_bus);
/**
* arch_setup_pdev_archdata - Allow manipulation of archdata before its used
* @pdev: platform device
*
* This is called before platform_device_add() such that any pdev_archdata may
* be setup before the platform_notifier is called. So if a user needs to
* manipulate any relevant information in the pdev_archdata they can do:
*
* platform_device_alloc()
* ... manipulate ...
* platform_device_add()
*
* And if they don't care they can just call platform_device_register() and
* everything will just work out.
*/
void __weak arch_setup_pdev_archdata(struct platform_device *pdev)
{
}
/**
* platform_get_resource - get a resource for a device
* @dev: platform device
* @type: resource type
* @num: resource index
*/
struct resource *platform_get_resource(struct platform_device *dev,
unsigned int type, unsigned int num)
{
int i;
for (i = 0; i < dev->num_resources; i++) {
struct resource *r = &dev->resource[i];
if (type == resource_type(r) && num-- == 0)
return r;
}
return NULL;
}
EXPORT_SYMBOL_GPL(platform_get_resource);
/**
* platform_get_irq - get an IRQ for a device
* @dev: platform device
* @num: IRQ number index
*/
int platform_get_irq(struct platform_device *dev, unsigned int num)
{
#ifdef CONFIG_SPARC
/* sparc does not have irqs represented as IORESOURCE_IRQ resources */
if (!dev || num >= dev->archdata.num_irqs)
return -ENXIO;
return dev->archdata.irqs[num];
#else
of/irq: do irq resolution in platform_get_irq Currently we get the following kind of errors if we try to use interrupt phandles to irqchips that have not yet initialized: irq: no irq domain found for /ocp/pinmux@48002030 ! ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at drivers/of/platform.c:171 of_device_alloc+0x144/0x184() Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.12.0-00038-g42a9708 #1012 (show_stack+0x14/0x1c) (dump_stack+0x6c/0xa0) (warn_slowpath_common+0x64/0x84) (warn_slowpath_null+0x1c/0x24) (of_device_alloc+0x144/0x184) (of_platform_device_create_pdata+0x44/0x9c) (of_platform_bus_create+0xd0/0x170) (of_platform_bus_create+0x12c/0x170) (of_platform_populate+0x60/0x98) This is because we're wrongly trying to populate resources that are not yet available. It's perfectly valid to create irqchips dynamically, so let's fix up the issue by resolving the interrupt resources when platform_get_irq is called. And then we also need to accept the fact that some irqdomains do not exist that early on, and only get initialized later on. So we can make the current WARN_ON into just into a pr_debug(). We still attempt to populate irq resources when we create the devices. This allows current drivers which don't use platform_get_irq to continue to function. Once all drivers are fixed, this code can be removed. Suggested-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Tony Lindgren <tony@atomide.com> Cc: stable@vger.kernel.org # v3.10+ Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-04-24 06:57:41 +08:00
struct resource *r;
if (IS_ENABLED(CONFIG_OF_IRQ) && dev->dev.of_node) {
int ret;
ret = of_irq_get(dev->dev.of_node, num);
if (ret > 0 || ret == -EPROBE_DEFER)
return ret;
}
of/irq: do irq resolution in platform_get_irq Currently we get the following kind of errors if we try to use interrupt phandles to irqchips that have not yet initialized: irq: no irq domain found for /ocp/pinmux@48002030 ! ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at drivers/of/platform.c:171 of_device_alloc+0x144/0x184() Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.12.0-00038-g42a9708 #1012 (show_stack+0x14/0x1c) (dump_stack+0x6c/0xa0) (warn_slowpath_common+0x64/0x84) (warn_slowpath_null+0x1c/0x24) (of_device_alloc+0x144/0x184) (of_platform_device_create_pdata+0x44/0x9c) (of_platform_bus_create+0xd0/0x170) (of_platform_bus_create+0x12c/0x170) (of_platform_populate+0x60/0x98) This is because we're wrongly trying to populate resources that are not yet available. It's perfectly valid to create irqchips dynamically, so let's fix up the issue by resolving the interrupt resources when platform_get_irq is called. And then we also need to accept the fact that some irqdomains do not exist that early on, and only get initialized later on. So we can make the current WARN_ON into just into a pr_debug(). We still attempt to populate irq resources when we create the devices. This allows current drivers which don't use platform_get_irq to continue to function. Once all drivers are fixed, this code can be removed. Suggested-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Tony Lindgren <tony@atomide.com> Cc: stable@vger.kernel.org # v3.10+ Signed-off-by: Grant Likely <grant.likely@linaro.org>
2014-04-24 06:57:41 +08:00
r = platform_get_resource(dev, IORESOURCE_IRQ, num);
if (has_acpi_companion(&dev->dev)) {
if (r && r->flags & IORESOURCE_DISABLED) {
int ret;
ret = acpi_irq_get(ACPI_HANDLE(&dev->dev), num, r);
if (ret)
return ret;
}
}
drivers: platform: parse IRQ flags from resources This fixes a regression from the net subsystem: After commit d52fdbb735c36a209f36a628d40ca9185b349ba7 "smc91x: retrieve IRQ and trigger flags in a modern way" a regression would appear on some legacy platforms such as the ARM PXA Zylonite that specify IRQ resources like this: static struct resource r = { .start = X, .end = X, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }; The previous code would retrieve the resource and parse the high edge setting in the SMC91x driver, a use pattern that means every driver specifying an IRQ flag from a static resource need to parse resource flags and apply them at runtime. As we switched the code to use IRQ descriptors to retrieve the the trigger type like this: irqd_get_trigger_type(irq_get_irq_data(...)); the code would work for new platforms using e.g. device tree as the backing irq descriptor would have its flags properly set, whereas this kind of oldstyle static resources at no point assign the trigger flags to the corresponding IRQ descriptor. To make the behaviour identical on modern device tree and legacy static platform data platforms, modify platform_get_irq() to assign the trigger flags to the irq descriptor when a client looks up an IRQ from static resources. Fixes: d52fdbb735c3 ("smc91x: retrieve IRQ and trigger flags in a modern way") Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-19 00:12:18 +08:00
/*
* The resources may pass trigger flags to the irqs that need
* to be set up. It so happens that the trigger flags for
* IORESOURCE_BITS correspond 1-to-1 to the IRQF_TRIGGER*
* settings.
*/
if (r && r->flags & IORESOURCE_BITS) {
struct irq_data *irqd;
irqd = irq_get_irq_data(r->start);
if (!irqd)
return -ENXIO;
irqd_set_trigger_type(irqd, r->flags & IORESOURCE_BITS);
}
if (r)
return r->start;
/*
* For the index 0 interrupt, allow falling back to GpioInt
* resources. While a device could have both Interrupt and GpioInt
* resources, making this fallback ambiguous, in many common cases
* the device will only expose one IRQ, and this fallback
* allows a common code path across either kind of resource.
*/
if (num == 0 && has_acpi_companion(&dev->dev))
return acpi_dev_gpio_irq_get(ACPI_COMPANION(&dev->dev), num);
return -ENXIO;
#endif
}
EXPORT_SYMBOL_GPL(platform_get_irq);
/**
* platform_irq_count - Count the number of IRQs a platform device uses
* @dev: platform device
*
* Return: Number of IRQs a platform device uses or EPROBE_DEFER
*/
int platform_irq_count(struct platform_device *dev)
{
int ret, nr = 0;
while ((ret = platform_get_irq(dev, nr)) >= 0)
nr++;
if (ret == -EPROBE_DEFER)
return ret;
return nr;
}
EXPORT_SYMBOL_GPL(platform_irq_count);
/**
* platform_get_resource_byname - get a resource for a device by name
* @dev: platform device
* @type: resource type
* @name: resource name
*/
struct resource *platform_get_resource_byname(struct platform_device *dev,
unsigned int type,
const char *name)
{
int i;
for (i = 0; i < dev->num_resources; i++) {
struct resource *r = &dev->resource[i];
if (unlikely(!r->name))
continue;
if (type == resource_type(r) && !strcmp(r->name, name))
return r;
}
return NULL;
}
EXPORT_SYMBOL_GPL(platform_get_resource_byname);
/**
* platform_get_irq_byname - get an IRQ for a device by name
* @dev: platform device
* @name: IRQ name
*/
int platform_get_irq_byname(struct platform_device *dev, const char *name)
{
struct resource *r;
if (IS_ENABLED(CONFIG_OF_IRQ) && dev->dev.of_node) {
int ret;
ret = of_irq_get_byname(dev->dev.of_node, name);
if (ret > 0 || ret == -EPROBE_DEFER)
return ret;
}
r = platform_get_resource_byname(dev, IORESOURCE_IRQ, name);
return r ? r->start : -ENXIO;
}
EXPORT_SYMBOL_GPL(platform_get_irq_byname);
/**
* platform_add_devices - add a numbers of platform devices
* @devs: array of platform devices to add
* @num: number of platform devices in array
*/
int platform_add_devices(struct platform_device **devs, int num)
{
int i, ret = 0;
for (i = 0; i < num; i++) {
ret = platform_device_register(devs[i]);
if (ret) {
while (--i >= 0)
platform_device_unregister(devs[i]);
break;
}
}
return ret;
}
EXPORT_SYMBOL_GPL(platform_add_devices);
struct platform_object {
struct platform_device pdev;
driver core/platform: remove unused implicit padding in platform_object Up to 7 bytes are wasted at the end of struct platform_object in the form of padding after name field: unfortunately this padding is not used when allocating the memory to hold the name. This patch converts name array from name[1] to C99 flexible array name[] (equivalent to name[0]) so that no padding is required by the presence of this field. Memory allocation is updated to take care of allocating an additional byte for the NUL terminating character. Built on Fedora 20, using GCC 4.8, for ARM, i386, SPARC64 and x86_64 architectures, the data structure layout can be reported with following command: $ pahole drivers/base/platform.o \ --recursive \ --class_name device,pdev_archdata,platform_device,platform_object Please find below some comparisons of structure layout for arm, i386, sparc64 and x86_64 architecture before and after the patch. --- obj-arm/drivers/base/platform.o.pahole.v3.15-rc7-79-gfe45736f4134 2014-05-30 10:32:06.290960701 +0200 +++ obj-arm/drivers/base/platform.o.pahole.v3.15-rc7-80-g2cdb06858d71 2014-05-30 11:26:20.851988347 +0200 @@ -81,10 +81,9 @@ /* XXX last struct has 4 bytes of padding */ /* --- cacheline 6 boundary (384 bytes) was 8 bytes ago --- */ - char name[1]; /* 392 1 */ + char name[0]; /* 392 0 */ - /* size: 400, cachelines: 7, members: 2 */ - /* padding: 7 */ + /* size: 392, cachelines: 7, members: 2 */ /* paddings: 1, sum paddings: 4 */ - /* last cacheline: 16 bytes */ + /* last cacheline: 8 bytes */ }; --- obj-i386/drivers/base/platform.o.pahole.v3.15-rc7-79-gfe45736f4134 2014-05-30 10:32:06.305960691 +0200 +++ obj-i386/drivers/base/platform.o.pahole.v3.15-rc7-80-g2cdb06858d71 2014-05-30 11:26:20.875988332 +0200 @@ -73,9 +73,8 @@ struct platform_object { struct platform_device pdev; /* 0 396 */ /* --- cacheline 6 boundary (384 bytes) was 12 bytes ago --- */ - char name[1]; /* 396 1 */ + char name[0]; /* 396 0 */ - /* size: 400, cachelines: 7, members: 2 */ - /* padding: 3 */ - /* last cacheline: 16 bytes */ + /* size: 396, cachelines: 7, members: 2 */ + /* last cacheline: 12 bytes */ }; --- obj-sparc64/drivers/base/platform.o.pahole.v3.15-rc7-79-gfe45736f4134 2014-05-30 10:32:06.406960625 +0200 +++ obj-sparc64/drivers/base/platform.o.pahole.v3.15-rc7-80-g2cdb06858d71 2014-05-30 11:26:20.971988269 +0200 @@ -94,9 +94,8 @@ struct platform_object { struct platform_device pdev; /* 0 2208 */ /* --- cacheline 34 boundary (2176 bytes) was 32 bytes ago --- */ - char name[1]; /* 2208 1 */ + char name[0]; /* 2208 0 */ - /* size: 2216, cachelines: 35, members: 2 */ - /* padding: 7 */ - /* last cacheline: 40 bytes */ + /* size: 2208, cachelines: 35, members: 2 */ + /* last cacheline: 32 bytes */ }; --- obj-x86_64/drivers/base/platform.o.pahole.v3.15-rc7-79-gfe45736f4134 2014-05-30 10:32:06.432960608 +0200 +++ obj-x86_64/drivers/base/platform.o.pahole.v3.15-rc7-80-g2cdb06858d71 2014-05-30 11:26:21.000988250 +0200 @@ -84,9 +84,8 @@ struct platform_object { struct platform_device pdev; /* 0 720 */ /* --- cacheline 11 boundary (704 bytes) was 16 bytes ago --- */ - char name[1]; /* 720 1 */ + char name[0]; /* 720 0 */ - /* size: 728, cachelines: 12, members: 2 */ - /* padding: 7 */ - /* last cacheline: 24 bytes */ + /* size: 720, cachelines: 12, members: 2 */ + /* last cacheline: 16 bytes */ }; Changes from v5 [1]: - dropped dma_mask allocation changes and only kept padding removal changes (name array length set to 0). Changes from v4 [2]: [by Emil Goode <emilgoode@gmail.com>:] - Split v4 of the patch into two separate patches. - Generated new object file size and data structure layout info. - Updated the changelog message. Changes from v3 [3]: - fixed commit message so that git am doesn't fail. Changes from v2 [4]: - move 'dma_mask' to platform_object so that it's always allocated and won't leak on release; remove all previously added support functions. - use C99 flexible array member for 'name' to remove padding at the end of platform_object. Changes from v1 [5]: - remove unneeded kfree() from error path - add reference to author/commit adding allocation of dmamask Changes from v0 [6]: - small rewrite to squeeze the patch to a bare minimal [1] http://lkml.kernel.org/r/1401122483-31603-2-git-send-email-emilgoode@gmail.com http://lkml.kernel.org/r/1401122483-31603-1-git-send-email-emilgoode@gmail.com http://lkml.kernel.org/r/1401122483-31603-3-git-send-email-emilgoode@gmail.com [2] http://lkml.kernel.org/r/1390817152-30898-1-git-send-email-ydroneaud@opteya.com https://patchwork.kernel.org/patch/3541871/ [3] http://lkml.kernel.org/r/1390771138-28348-1-git-send-email-ydroneaud@opteya.com https://patchwork.kernel.org/patch/3540081/ [4] http://lkml.kernel.org/r/1389683909-17495-1-git-send-email-ydroneaud@opteya.com https://patchwork.kernel.org/patch/3484411/ [5] http://lkml.kernel.org/r/1389649085-7365-1-git-send-email-ydroneaud@opteya.com https://patchwork.kernel.org/patch/3480961/ [6] http://lkml.kernel.org/r/1386886207-2735-1-git-send-email-ydroneaud@opteya.com Cc: Emil Goode <emilgoode@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Olof Johansson <olof@lixom.net> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-31 04:02:47 +08:00
char name[];
};
/**
* platform_device_put - destroy a platform device
* @pdev: platform device to free
*
* Free all memory associated with a platform device. This function must
* _only_ be externally called in error cases. All other usage is a bug.
*/
void platform_device_put(struct platform_device *pdev)
{
if (!IS_ERR_OR_NULL(pdev))
put_device(&pdev->dev);
}
EXPORT_SYMBOL_GPL(platform_device_put);
static void platform_device_release(struct device *dev)
{
struct platform_object *pa = container_of(dev, struct platform_object,
pdev.dev);
of_device_node_put(&pa->pdev.dev);
kfree(pa->pdev.dev.platform_data);
kfree(pa->pdev.mfd_cell);
kfree(pa->pdev.resource);
kfree(pa->pdev.driver_override);
kfree(pa);
}
/**
* platform_device_alloc - create a platform device
* @name: base name of the device we're adding
* @id: instance id
*
* Create a platform device object which can have other objects attached
* to it, and which will have attached objects freed when it is released.
*/
struct platform_device *platform_device_alloc(const char *name, int id)
{
struct platform_object *pa;
driver core/platform: remove unused implicit padding in platform_object Up to 7 bytes are wasted at the end of struct platform_object in the form of padding after name field: unfortunately this padding is not used when allocating the memory to hold the name. This patch converts name array from name[1] to C99 flexible array name[] (equivalent to name[0]) so that no padding is required by the presence of this field. Memory allocation is updated to take care of allocating an additional byte for the NUL terminating character. Built on Fedora 20, using GCC 4.8, for ARM, i386, SPARC64 and x86_64 architectures, the data structure layout can be reported with following command: $ pahole drivers/base/platform.o \ --recursive \ --class_name device,pdev_archdata,platform_device,platform_object Please find below some comparisons of structure layout for arm, i386, sparc64 and x86_64 architecture before and after the patch. --- obj-arm/drivers/base/platform.o.pahole.v3.15-rc7-79-gfe45736f4134 2014-05-30 10:32:06.290960701 +0200 +++ obj-arm/drivers/base/platform.o.pahole.v3.15-rc7-80-g2cdb06858d71 2014-05-30 11:26:20.851988347 +0200 @@ -81,10 +81,9 @@ /* XXX last struct has 4 bytes of padding */ /* --- cacheline 6 boundary (384 bytes) was 8 bytes ago --- */ - char name[1]; /* 392 1 */ + char name[0]; /* 392 0 */ - /* size: 400, cachelines: 7, members: 2 */ - /* padding: 7 */ + /* size: 392, cachelines: 7, members: 2 */ /* paddings: 1, sum paddings: 4 */ - /* last cacheline: 16 bytes */ + /* last cacheline: 8 bytes */ }; --- obj-i386/drivers/base/platform.o.pahole.v3.15-rc7-79-gfe45736f4134 2014-05-30 10:32:06.305960691 +0200 +++ obj-i386/drivers/base/platform.o.pahole.v3.15-rc7-80-g2cdb06858d71 2014-05-30 11:26:20.875988332 +0200 @@ -73,9 +73,8 @@ struct platform_object { struct platform_device pdev; /* 0 396 */ /* --- cacheline 6 boundary (384 bytes) was 12 bytes ago --- */ - char name[1]; /* 396 1 */ + char name[0]; /* 396 0 */ - /* size: 400, cachelines: 7, members: 2 */ - /* padding: 3 */ - /* last cacheline: 16 bytes */ + /* size: 396, cachelines: 7, members: 2 */ + /* last cacheline: 12 bytes */ }; --- obj-sparc64/drivers/base/platform.o.pahole.v3.15-rc7-79-gfe45736f4134 2014-05-30 10:32:06.406960625 +0200 +++ obj-sparc64/drivers/base/platform.o.pahole.v3.15-rc7-80-g2cdb06858d71 2014-05-30 11:26:20.971988269 +0200 @@ -94,9 +94,8 @@ struct platform_object { struct platform_device pdev; /* 0 2208 */ /* --- cacheline 34 boundary (2176 bytes) was 32 bytes ago --- */ - char name[1]; /* 2208 1 */ + char name[0]; /* 2208 0 */ - /* size: 2216, cachelines: 35, members: 2 */ - /* padding: 7 */ - /* last cacheline: 40 bytes */ + /* size: 2208, cachelines: 35, members: 2 */ + /* last cacheline: 32 bytes */ }; --- obj-x86_64/drivers/base/platform.o.pahole.v3.15-rc7-79-gfe45736f4134 2014-05-30 10:32:06.432960608 +0200 +++ obj-x86_64/drivers/base/platform.o.pahole.v3.15-rc7-80-g2cdb06858d71 2014-05-30 11:26:21.000988250 +0200 @@ -84,9 +84,8 @@ struct platform_object { struct platform_device pdev; /* 0 720 */ /* --- cacheline 11 boundary (704 bytes) was 16 bytes ago --- */ - char name[1]; /* 720 1 */ + char name[0]; /* 720 0 */ - /* size: 728, cachelines: 12, members: 2 */ - /* padding: 7 */ - /* last cacheline: 24 bytes */ + /* size: 720, cachelines: 12, members: 2 */ + /* last cacheline: 16 bytes */ }; Changes from v5 [1]: - dropped dma_mask allocation changes and only kept padding removal changes (name array length set to 0). Changes from v4 [2]: [by Emil Goode <emilgoode@gmail.com>:] - Split v4 of the patch into two separate patches. - Generated new object file size and data structure layout info. - Updated the changelog message. Changes from v3 [3]: - fixed commit message so that git am doesn't fail. Changes from v2 [4]: - move 'dma_mask' to platform_object so that it's always allocated and won't leak on release; remove all previously added support functions. - use C99 flexible array member for 'name' to remove padding at the end of platform_object. Changes from v1 [5]: - remove unneeded kfree() from error path - add reference to author/commit adding allocation of dmamask Changes from v0 [6]: - small rewrite to squeeze the patch to a bare minimal [1] http://lkml.kernel.org/r/1401122483-31603-2-git-send-email-emilgoode@gmail.com http://lkml.kernel.org/r/1401122483-31603-1-git-send-email-emilgoode@gmail.com http://lkml.kernel.org/r/1401122483-31603-3-git-send-email-emilgoode@gmail.com [2] http://lkml.kernel.org/r/1390817152-30898-1-git-send-email-ydroneaud@opteya.com https://patchwork.kernel.org/patch/3541871/ [3] http://lkml.kernel.org/r/1390771138-28348-1-git-send-email-ydroneaud@opteya.com https://patchwork.kernel.org/patch/3540081/ [4] http://lkml.kernel.org/r/1389683909-17495-1-git-send-email-ydroneaud@opteya.com https://patchwork.kernel.org/patch/3484411/ [5] http://lkml.kernel.org/r/1389649085-7365-1-git-send-email-ydroneaud@opteya.com https://patchwork.kernel.org/patch/3480961/ [6] http://lkml.kernel.org/r/1386886207-2735-1-git-send-email-ydroneaud@opteya.com Cc: Emil Goode <emilgoode@gmail.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Olof Johansson <olof@lixom.net> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-31 04:02:47 +08:00
pa = kzalloc(sizeof(*pa) + strlen(name) + 1, GFP_KERNEL);
if (pa) {
strcpy(pa->name, name);
pa->pdev.name = pa->name;
pa->pdev.id = id;
device_initialize(&pa->pdev.dev);
pa->pdev.dev.release = platform_device_release;
arch_setup_pdev_archdata(&pa->pdev);
}
return pa ? &pa->pdev : NULL;
}
EXPORT_SYMBOL_GPL(platform_device_alloc);
/**
* platform_device_add_resources - add resources to a platform device
* @pdev: platform device allocated by platform_device_alloc to add resources to
* @res: set of resources that needs to be allocated for the device
* @num: number of resources
*
* Add a copy of the resources to the platform device. The memory
* associated with the resources will be freed when the platform device is
* released.
*/
int platform_device_add_resources(struct platform_device *pdev,
const struct resource *res, unsigned int num)
{
struct resource *r = NULL;
if (res) {
r = kmemdup(res, sizeof(struct resource) * num, GFP_KERNEL);
if (!r)
return -ENOMEM;
}
kfree(pdev->resource);
pdev->resource = r;
pdev->num_resources = num;
return 0;
}
EXPORT_SYMBOL_GPL(platform_device_add_resources);
/**
* platform_device_add_data - add platform-specific data to a platform device
* @pdev: platform device allocated by platform_device_alloc to add resources to
* @data: platform specific data for this platform device
* @size: size of platform specific data
*
* Add a copy of platform specific data to the platform device's
* platform_data pointer. The memory associated with the platform data
* will be freed when the platform device is released.
*/
int platform_device_add_data(struct platform_device *pdev, const void *data,
size_t size)
{
void *d = NULL;
if (data) {
d = kmemdup(data, size, GFP_KERNEL);
if (!d)
return -ENOMEM;
}
kfree(pdev->dev.platform_data);
pdev->dev.platform_data = d;
return 0;
}
EXPORT_SYMBOL_GPL(platform_device_add_data);
/**
* platform_device_add_properties - add built-in properties to a platform device
* @pdev: platform device to add properties to
* @properties: null terminated array of properties to add
*
* The function will take deep copy of @properties and attach the copy to the
* platform device. The memory associated with properties will be freed when the
* platform device is released.
*/
int platform_device_add_properties(struct platform_device *pdev,
const struct property_entry *properties)
{
return device_add_properties(&pdev->dev, properties);
}
EXPORT_SYMBOL_GPL(platform_device_add_properties);
/**
* platform_device_add - add a platform device to device hierarchy
* @pdev: platform device we're adding
*
* This is part 2 of platform_device_register(), though may be called
* separately _iff_ pdev was allocated by platform_device_alloc().
*/
int platform_device_add(struct platform_device *pdev)
{
int i, ret;
if (!pdev)
return -EINVAL;
if (!pdev->dev.parent)
pdev->dev.parent = &platform_bus;
pdev->dev.bus = &platform_bus_type;
switch (pdev->id) {
default:
dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id);
break;
case PLATFORM_DEVID_NONE:
dev_set_name(&pdev->dev, "%s", pdev->name);
break;
case PLATFORM_DEVID_AUTO:
/*
* Automatically allocated device ID. We mark it as such so
* that we remember it must be freed, and we append a suffix
* to avoid namespace collision with explicit IDs.
*/
ret = ida_simple_get(&platform_devid_ida, 0, 0, GFP_KERNEL);
if (ret < 0)
goto err_out;
pdev->id = ret;
pdev->id_auto = true;
dev_set_name(&pdev->dev, "%s.%d.auto", pdev->name, pdev->id);
break;
}
for (i = 0; i < pdev->num_resources; i++) {
struct resource *p, *r = &pdev->resource[i];
if (r->name == NULL)
r->name = dev_name(&pdev->dev);
p = r->parent;
if (!p) {
if (resource_type(r) == IORESOURCE_MEM)
p = &iomem_resource;
else if (resource_type(r) == IORESOURCE_IO)
p = &ioport_resource;
}
if (p && insert_resource(p, r)) {
dev_err(&pdev->dev, "failed to claim resource %d: %pR\n", i, r);
ret = -EBUSY;
goto failed;
}
}
pr_debug("Registering platform device '%s'. Parent at %s\n",
dev_name(&pdev->dev), dev_name(pdev->dev.parent));
ret = device_add(&pdev->dev);
if (ret == 0)
return ret;
failed:
if (pdev->id_auto) {
ida_simple_remove(&platform_devid_ida, pdev->id);
pdev->id = PLATFORM_DEVID_AUTO;
}
while (--i >= 0) {
struct resource *r = &pdev->resource[i];
drivercore: Fix unregistration path of platform devices The unregister path of platform_device is broken. On registration, it will register all resources with either a parent already set, or type==IORESOURCE_{IO,MEM}. However, on unregister it will release everything with type==IORESOURCE_{IO,MEM}, but ignore the others. There are also cases where resources don't get registered in the first place, like with devices created by of_platform_populate()*. Fix the unregister path to be symmetrical with the register path by checking the parent pointer instead of the type field to decide which resources to unregister. This is safe because the upshot of the registration path algorithm is that registered resources have a parent pointer, and non-registered resources do not. * It can be argued that of_platform_populate() should be registering it's resources, and they argument has some merit. However, there are quite a few platforms that end up broken if we try to do that due to overlapping resources in the device tree. Until that is fixed, we need to solve the immediate problem. Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Rob Herring <robh@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Grant Likely <grant.likely@linaro.org> Tested-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: stable@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2015-06-07 22:20:11 +08:00
if (r->parent)
release_resource(r);
}
err_out:
return ret;
}
EXPORT_SYMBOL_GPL(platform_device_add);
/**
* platform_device_del - remove a platform-level device
* @pdev: platform device we're removing
*
* Note that this function will also release all memory- and port-based
* resources owned by the device (@dev->resource). This function must
* _only_ be externally called in error cases. All other usage is a bug.
*/
void platform_device_del(struct platform_device *pdev)
{
int i;
if (!IS_ERR_OR_NULL(pdev)) {
device_del(&pdev->dev);
if (pdev->id_auto) {
ida_simple_remove(&platform_devid_ida, pdev->id);
pdev->id = PLATFORM_DEVID_AUTO;
}
for (i = 0; i < pdev->num_resources; i++) {
struct resource *r = &pdev->resource[i];
drivercore: Fix unregistration path of platform devices The unregister path of platform_device is broken. On registration, it will register all resources with either a parent already set, or type==IORESOURCE_{IO,MEM}. However, on unregister it will release everything with type==IORESOURCE_{IO,MEM}, but ignore the others. There are also cases where resources don't get registered in the first place, like with devices created by of_platform_populate()*. Fix the unregister path to be symmetrical with the register path by checking the parent pointer instead of the type field to decide which resources to unregister. This is safe because the upshot of the registration path algorithm is that registered resources have a parent pointer, and non-registered resources do not. * It can be argued that of_platform_populate() should be registering it's resources, and they argument has some merit. However, there are quite a few platforms that end up broken if we try to do that due to overlapping resources in the device tree. Until that is fixed, we need to solve the immediate problem. Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Rob Herring <robh@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Grant Likely <grant.likely@linaro.org> Tested-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: stable@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org>
2015-06-07 22:20:11 +08:00
if (r->parent)
release_resource(r);
}
}
}
EXPORT_SYMBOL_GPL(platform_device_del);
/**
* platform_device_register - add a platform-level device
* @pdev: platform device we're adding
*/
int platform_device_register(struct platform_device *pdev)
{
device_initialize(&pdev->dev);
arch_setup_pdev_archdata(pdev);
return platform_device_add(pdev);
}
EXPORT_SYMBOL_GPL(platform_device_register);
/**
* platform_device_unregister - unregister a platform-level device
* @pdev: platform device we're unregistering
*
* Unregistration is done in 2 steps. First we release all resources
* and remove it from the subsystem, then we drop reference count by
* calling platform_device_put().
*/
void platform_device_unregister(struct platform_device *pdev)
{
platform_device_del(pdev);
platform_device_put(pdev);
}
EXPORT_SYMBOL_GPL(platform_device_unregister);
/**
* platform_device_register_full - add a platform-level device with
* resources and platform-specific data
fix hotplug for legacy platform drivers We've had various reports of some legacy "probe the hardware" style platform drivers having nasty problems with hotplug support. The core issue is that those legacy drivers don't fully conform to the driver model. They assume a role that should be the responsibility of infrastructure code: creating device nodes. The "modprobe" step in hotplugging relies on drivers to have split those roles into different modules. The lack of this split causes the problems. When a driver creates nodes for devices that don't exist (sending a hotplug event), then exits (aborting one modprobe) before the "modprobe $MODALIAS" step completes (by failing, since it's in the middle of a modprobe), the result can be an endless loop of modprobe invocations ... badness. This fix uses the newish per-device flag controlling issuance of "add" events. (A previous version of this patch used a per-device "driver can hotplug" flag, which only scrubbed $MODALIAS from the environment rather than suppressing the entire hotplug event.) It also shrinks that flag to one bit, saving a word in "struct device". So the net of this patch is removing some nasty failures with legacy drivers, while retaining hotplug capability for the majority of platform drivers. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Greg KH <gregkh@suse.de> Cc: Andres Salomon <dilinger@debian.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 15:29:39 +08:00
*
* @pdevinfo: data used to create device
*
* Returns &struct platform_device pointer on success, or ERR_PTR() on error.
*/
struct platform_device *platform_device_register_full(
const struct platform_device_info *pdevinfo)
{
int ret = -ENOMEM;
struct platform_device *pdev;
pdev = platform_device_alloc(pdevinfo->name, pdevinfo->id);
if (!pdev)
goto err_alloc;
pdev->dev.parent = pdevinfo->parent;
pdev->dev.fwnode = pdevinfo->fwnode;
if (pdevinfo->dma_mask) {
/*
* This memory isn't freed when the device is put,
* I don't have a nice idea for that though. Conceptually
* dma_mask in struct device should not be a pointer.
* See http://thread.gmane.org/gmane.linux.kernel.pci/9081
*/
pdev->dev.dma_mask =
kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL);
if (!pdev->dev.dma_mask)
goto err;
drivers/base/platform.c: kmemleak ignore a known leak unreferenced object 0xffff808ec6dc5a80 (size 128): comm "swapper/0", pid 1, jiffies 4294938063 (age 2560.530s) hex dump (first 32 bytes): ff ff ff ff 00 00 00 00 6b 6b 6b 6b 6b 6b 6b 6b ........kkkkkkkk 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk backtrace: [<00000000476dcf8c>] kmem_cache_alloc_trace+0x430/0x500 [<000000004f708d37>] platform_device_register_full+0xbc/0x1e8 [<000000006c2a7ec7>] acpi_create_platform_device+0x370/0x450 [<00000000ef135642>] acpi_default_enumeration+0x34/0x78 [<000000003bd9a052>] acpi_bus_attach+0x2dc/0x3e0 [<000000003cf4f7f2>] acpi_bus_attach+0x108/0x3e0 [<000000003cf4f7f2>] acpi_bus_attach+0x108/0x3e0 [<000000002968643e>] acpi_bus_scan+0xb0/0x110 [<0000000010dd0bd7>] acpi_scan_init+0x1a8/0x410 [<00000000965b3c5a>] acpi_init+0x408/0x49c [<00000000ed4b9fe2>] do_one_initcall+0x178/0x7f4 [<00000000a5ac5a74>] kernel_init_freeable+0x9d4/0xa9c [<0000000070ea6c15>] kernel_init+0x18/0x138 [<00000000fb8fff06>] ret_from_fork+0x10/0x1c [<0000000041273a0d>] 0xffffffffffffffff Then, faddr2line pointed out this line, /* * This memory isn't freed when the device is put, * I don't have a nice idea for that though. Conceptually * dma_mask in struct device should not be a pointer. * See http://thread.gmane.org/gmane.linux.kernel.pci/9081 */ pdev->dev.dma_mask = kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL); Since this leak has existed for more than 8 years and it does not reference other parts of the memory, let kmemleak ignore it, so users don't need to waste time reporting this in the future. Link: http://lkml.kernel.org/r/20181206160751.36211-1-cai@gmx.us Signed-off-by: Qian Cai <cai@gmx.us> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J . Wysocki" <rafael.j.wysocki@intel.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 07:29:05 +08:00
kmemleak_ignore(pdev->dev.dma_mask);
*pdev->dev.dma_mask = pdevinfo->dma_mask;
pdev->dev.coherent_dma_mask = pdevinfo->dma_mask;
}
ret = platform_device_add_resources(pdev,
pdevinfo->res, pdevinfo->num_res);
if (ret)
goto err;
ret = platform_device_add_data(pdev,
pdevinfo->data, pdevinfo->size_data);
if (ret)
goto err;
if (pdevinfo->properties) {
ret = platform_device_add_properties(pdev,
pdevinfo->properties);
if (ret)
goto err;
}
ret = platform_device_add(pdev);
if (ret) {
err:
ACPI / driver core: Store an ACPI device pointer in struct acpi_dev_node Modify struct acpi_dev_node to contain a pointer to struct acpi_device associated with the given device object (that is, its ACPI companion device) instead of an ACPI handle corresponding to it. Introduce two new macros for manipulating that pointer in a CONFIG_ACPI-safe way, ACPI_COMPANION() and ACPI_COMPANION_SET(), and rework the ACPI_HANDLE() macro to take the above changes into account. Drop the ACPI_HANDLE_SET() macro entirely and rework its users to use ACPI_COMPANION_SET() instead. For some of them who used to pass the result of acpi_get_child() directly to ACPI_HANDLE_SET() introduce a helper routine acpi_preset_companion() doing an equivalent thing. The main motivation for doing this is that there are things represented by struct acpi_device objects that don't have valid ACPI handles (so called fixed ACPI hardware features, such as power and sleep buttons) and we would like to create platform device objects for them and "glue" them to their ACPI companions in the usual way (which currently is impossible due to the lack of valid ACPI handles). However, there are more reasons why it may be useful. First, struct acpi_device pointers allow of much better type checking than void pointers which are ACPI handles, so it should be more difficult to write buggy code using modified struct acpi_dev_node and the new macros. Second, the change should help to reduce (over time) the number of places in which the result of ACPI_HANDLE() is passed to acpi_bus_get_device() in order to obtain a pointer to the struct acpi_device associated with the given "physical" device, because now that pointer is returned by ACPI_COMPANION() directly. Finally, the change should make it easier to write generic code that will build both for CONFIG_ACPI set and unset without adding explicit compiler directives to it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> # on Haswell Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Aaron Lu <aaron.lu@intel.com> # for ATA and SDIO part
2013-11-12 05:41:56 +08:00
ACPI_COMPANION_SET(&pdev->dev, NULL);
kfree(pdev->dev.dma_mask);
err_alloc:
platform_device_put(pdev);
return ERR_PTR(ret);
}
return pdev;
}
EXPORT_SYMBOL_GPL(platform_device_register_full);
static int platform_drv_probe(struct device *_dev)
{
struct platform_driver *drv = to_platform_driver(_dev->driver);
struct platform_device *dev = to_platform_device(_dev);
int ret;
ret = of_clk_set_defaults(_dev->of_node, false);
if (ret < 0)
return ret;
ret = dev_pm_domain_attach(_dev, true);
if (ret)
goto out;
if (drv->probe) {
ret = drv->probe(dev);
if (ret)
dev_pm_domain_detach(_dev, true);
}
out:
if (drv->prevent_deferred_probe && ret == -EPROBE_DEFER) {
dev_warn(_dev, "probe deferral not supported\n");
ret = -ENXIO;
}
return ret;
}
static int platform_drv_probe_fail(struct device *_dev)
{
return -ENXIO;
}
static int platform_drv_remove(struct device *_dev)
{
struct platform_driver *drv = to_platform_driver(_dev->driver);
struct platform_device *dev = to_platform_device(_dev);
int ret = 0;
if (drv->remove)
ret = drv->remove(dev);
dev_pm_domain_detach(_dev, true);
return ret;
}
static void platform_drv_shutdown(struct device *_dev)
{
struct platform_driver *drv = to_platform_driver(_dev->driver);
struct platform_device *dev = to_platform_device(_dev);
if (drv->shutdown)
drv->shutdown(dev);
}
/**
* __platform_driver_register - register a driver for platform-level devices
* @drv: platform driver structure
* @owner: owning module/driver
*/
int __platform_driver_register(struct platform_driver *drv,
struct module *owner)
{
drv->driver.owner = owner;
drv->driver.bus = &platform_bus_type;
drv->driver.probe = platform_drv_probe;
drv->driver.remove = platform_drv_remove;
drv->driver.shutdown = platform_drv_shutdown;
return driver_register(&drv->driver);
}
EXPORT_SYMBOL_GPL(__platform_driver_register);
/**
* platform_driver_unregister - unregister a driver for platform-level devices
* @drv: platform driver structure
*/
void platform_driver_unregister(struct platform_driver *drv)
{
driver_unregister(&drv->driver);
}
EXPORT_SYMBOL_GPL(platform_driver_unregister);
/**
* __platform_driver_probe - register driver for non-hotpluggable device
* @drv: platform driver structure
* @probe: the driver probe routine, probably from an __init section
* @module: module which will be the owner of the driver
*
* Use this instead of platform_driver_register() when you know the device
* is not hotpluggable and has already been registered, and you want to
* remove its run-once probe() infrastructure from memory after the driver
* has bound to the device.
*
* One typical use for this would be with drivers for controllers integrated
* into system-on-chip processors, where the controller devices have been
* configured as part of board setup.
*
* Note that this is incompatible with deferred probing.
*
* Returns zero if the driver registered and bound to a device, else returns
* a negative error code and with the driver not registered.
*/
int __init_or_module __platform_driver_probe(struct platform_driver *drv,
int (*probe)(struct platform_device *), struct module *module)
{
int retval, code;
if (drv->driver.probe_type == PROBE_PREFER_ASYNCHRONOUS) {
pr_err("%s: drivers registered with %s can not be probed asynchronously\n",
drv->driver.name, __func__);
return -EINVAL;
}
/*
* We have to run our probes synchronously because we check if
* we find any devices to bind to and exit with error if there
* are any.
*/
drv->driver.probe_type = PROBE_FORCE_SYNCHRONOUS;
/*
* Prevent driver from requesting probe deferral to avoid further
* futile probe attempts.
*/
drv->prevent_deferred_probe = true;
/* make sure driver won't have bind/unbind attributes */
drv->driver.suppress_bind_attrs = true;
/* temporary section violation during probe() */
drv->probe = probe;
retval = code = __platform_driver_register(drv, module);
/*
* Fixup that section violation, being paranoid about code scanning
* the list of drivers in order to probe new devices. Check to see
* if the probe was successful, and make sure any forced probes of
* new devices fail.
*/
spin_lock(&drv->driver.bus->p->klist_drivers.k_lock);
drv->probe = NULL;
if (code == 0 && list_empty(&drv->driver.p->klist_devices.k_list))
retval = -ENODEV;
drv->driver.probe = platform_drv_probe_fail;
spin_unlock(&drv->driver.bus->p->klist_drivers.k_lock);
if (code != retval)
platform_driver_unregister(drv);
return retval;
}
EXPORT_SYMBOL_GPL(__platform_driver_probe);
/**
* __platform_create_bundle - register driver and create corresponding device
* @driver: platform driver structure
* @probe: the driver probe routine, probably from an __init section
* @res: set of resources that needs to be allocated for the device
* @n_res: number of resources
* @data: platform specific data for this platform device
* @size: size of platform specific data
* @module: module which will be the owner of the driver
*
* Use this in legacy-style modules that probe hardware directly and
* register a single platform device and corresponding platform driver.
*
* Returns &struct platform_device pointer on success, or ERR_PTR() on error.
*/
struct platform_device * __init_or_module __platform_create_bundle(
struct platform_driver *driver,
int (*probe)(struct platform_device *),
struct resource *res, unsigned int n_res,
const void *data, size_t size, struct module *module)
{
struct platform_device *pdev;
int error;
pdev = platform_device_alloc(driver->driver.name, -1);
if (!pdev) {
error = -ENOMEM;
goto err_out;
}
error = platform_device_add_resources(pdev, res, n_res);
if (error)
goto err_pdev_put;
error = platform_device_add_data(pdev, data, size);
if (error)
goto err_pdev_put;
error = platform_device_add(pdev);
if (error)
goto err_pdev_put;
error = __platform_driver_probe(driver, probe, module);
if (error)
goto err_pdev_del;
return pdev;
err_pdev_del:
platform_device_del(pdev);
err_pdev_put:
platform_device_put(pdev);
err_out:
return ERR_PTR(error);
}
EXPORT_SYMBOL_GPL(__platform_create_bundle);
/**
* __platform_register_drivers - register an array of platform drivers
* @drivers: an array of drivers to register
* @count: the number of drivers to register
* @owner: module owning the drivers
*
* Registers platform drivers specified by an array. On failure to register a
* driver, all previously registered drivers will be unregistered. Callers of
* this API should use platform_unregister_drivers() to unregister drivers in
* the reverse order.
*
* Returns: 0 on success or a negative error code on failure.
*/
int __platform_register_drivers(struct platform_driver * const *drivers,
unsigned int count, struct module *owner)
{
unsigned int i;
int err;
for (i = 0; i < count; i++) {
pr_debug("registering platform driver %ps\n", drivers[i]);
err = __platform_driver_register(drivers[i], owner);
if (err < 0) {
pr_err("failed to register platform driver %ps: %d\n",
drivers[i], err);
goto error;
}
}
return 0;
error:
while (i--) {
pr_debug("unregistering platform driver %ps\n", drivers[i]);
platform_driver_unregister(drivers[i]);
}
return err;
}
EXPORT_SYMBOL_GPL(__platform_register_drivers);
/**
* platform_unregister_drivers - unregister an array of platform drivers
* @drivers: an array of drivers to unregister
* @count: the number of drivers to unregister
*
* Unegisters platform drivers specified by an array. This is typically used
* to complement an earlier call to platform_register_drivers(). Drivers are
* unregistered in the reverse order in which they were registered.
*/
void platform_unregister_drivers(struct platform_driver * const *drivers,
unsigned int count)
{
while (count--) {
pr_debug("unregistering platform driver %ps\n", drivers[count]);
platform_driver_unregister(drivers[count]);
}
}
EXPORT_SYMBOL_GPL(platform_unregister_drivers);
/* modalias support enables more hands-off userspace setup:
* (a) environment variable lets new-style hotplug events work once system is
* fully running: "modprobe $MODALIAS"
* (b) sysfs attribute lets new-style coldplug recover from hotplug events
* mishandled before system is fully running: "modprobe $(cat modalias)"
*/
static ssize_t modalias_show(struct device *dev, struct device_attribute *a,
char *buf)
{
struct platform_device *pdev = to_platform_device(dev);
int len;
len = of_device_modalias(dev, buf, PAGE_SIZE);
if (len != -ENODEV)
return len;
len = acpi_device_modalias(dev, buf, PAGE_SIZE -1);
if (len != -ENODEV)
return len;
len = snprintf(buf, PAGE_SIZE, "platform:%s\n", pdev->name);
return (len >= PAGE_SIZE) ? (PAGE_SIZE - 1) : len;
}
static DEVICE_ATTR_RO(modalias);
static ssize_t driver_override_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct platform_device *pdev = to_platform_device(dev);
char *driver_override, *old, *cp;
/* We need to keep extra room for a newline */
if (count >= (PAGE_SIZE - 1))
return -EINVAL;
driver_override = kstrndup(buf, count, GFP_KERNEL);
if (!driver_override)
return -ENOMEM;
cp = strchr(driver_override, '\n');
if (cp)
*cp = '\0';
device_lock(dev);
old = pdev->driver_override;
if (strlen(driver_override)) {
pdev->driver_override = driver_override;
} else {
kfree(driver_override);
pdev->driver_override = NULL;
}
device_unlock(dev);
kfree(old);
return count;
}
static ssize_t driver_override_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct platform_device *pdev = to_platform_device(dev);
ssize_t len;
device_lock(dev);
len = sprintf(buf, "%s\n", pdev->driver_override);
device_unlock(dev);
return len;
}
static DEVICE_ATTR_RW(driver_override);
static struct attribute *platform_dev_attrs[] = {
&dev_attr_modalias.attr,
&dev_attr_driver_override.attr,
NULL,
};
ATTRIBUTE_GROUPS(platform_dev);
static int platform_uevent(struct device *dev, struct kobj_uevent_env *env)
{
struct platform_device *pdev = to_platform_device(dev);
int rc;
/* Some devices have extra OF data and an OF-style MODALIAS */
rc = of_device_uevent_modalias(dev, env);
if (rc != -ENODEV)
return rc;
rc = acpi_device_uevent_modalias(dev, env);
if (rc != -ENODEV)
return rc;
add_uevent_var(env, "MODALIAS=%s%s", PLATFORM_MODULE_PREFIX,
pdev->name);
return 0;
}
static const struct platform_device_id *platform_match_id(
const struct platform_device_id *id,
struct platform_device *pdev)
{
while (id->name[0]) {
if (strcmp(pdev->name, id->name) == 0) {
pdev->id_entry = id;
return id;
}
id++;
}
return NULL;
}
/**
* platform_match - bind platform device to platform driver.
* @dev: device.
* @drv: driver.
*
* Platform device IDs are assumed to be encoded like this:
* "<name><instance>", where <name> is a short description of the type of
* device, like "pci" or "floppy", and <instance> is the enumerated
* instance of the device, like '0' or '42'. Driver IDs are simply
* "<name>". So, extract the <name> from the platform_device structure,
* and compare it against the name of the driver. Return whether they match
* or not.
*/
static int platform_match(struct device *dev, struct device_driver *drv)
{
struct platform_device *pdev = to_platform_device(dev);
struct platform_driver *pdrv = to_platform_driver(drv);
/* When driver_override is set, only bind to the matching driver */
if (pdev->driver_override)
return !strcmp(pdev->driver_override, drv->name);
/* Attempt an OF style match first */
if (of_driver_match_device(dev, drv))
return 1;
/* Then try ACPI style match */
if (acpi_driver_match_device(dev, drv))
return 1;
/* Then try to match against the id table */
if (pdrv->id_table)
return platform_match_id(pdrv->id_table, pdev) != NULL;
/* fall-back to driver name match */
return (strcmp(pdev->name, drv->name) == 0);
}
#ifdef CONFIG_PM_SLEEP
static int platform_legacy_suspend(struct device *dev, pm_message_t mesg)
{
struct platform_driver *pdrv = to_platform_driver(dev->driver);
struct platform_device *pdev = to_platform_device(dev);
int ret = 0;
if (dev->driver && pdrv->suspend)
ret = pdrv->suspend(pdev, mesg);
return ret;
}
static int platform_legacy_resume(struct device *dev)
{
struct platform_driver *pdrv = to_platform_driver(dev->driver);
struct platform_device *pdev = to_platform_device(dev);
int ret = 0;
if (dev->driver && pdrv->resume)
ret = pdrv->resume(pdev);
return ret;
}
#endif /* CONFIG_PM_SLEEP */
#ifdef CONFIG_SUSPEND
int platform_pm_suspend(struct device *dev)
{
struct device_driver *drv = dev->driver;
int ret = 0;
if (!drv)
return 0;
if (drv->pm) {
if (drv->pm->suspend)
ret = drv->pm->suspend(dev);
} else {
ret = platform_legacy_suspend(dev, PMSG_SUSPEND);
}
return ret;
}
int platform_pm_resume(struct device *dev)
{
struct device_driver *drv = dev->driver;
int ret = 0;
if (!drv)
return 0;
if (drv->pm) {
if (drv->pm->resume)
ret = drv->pm->resume(dev);
} else {
ret = platform_legacy_resume(dev);
}
return ret;
}
#endif /* CONFIG_SUSPEND */
#ifdef CONFIG_HIBERNATE_CALLBACKS
int platform_pm_freeze(struct device *dev)
{
struct device_driver *drv = dev->driver;
int ret = 0;
if (!drv)
return 0;
if (drv->pm) {
if (drv->pm->freeze)
ret = drv->pm->freeze(dev);
} else {
ret = platform_legacy_suspend(dev, PMSG_FREEZE);
}
return ret;
}
int platform_pm_thaw(struct device *dev)
{
struct device_driver *drv = dev->driver;
int ret = 0;
if (!drv)
return 0;
if (drv->pm) {
if (drv->pm->thaw)
ret = drv->pm->thaw(dev);
} else {
ret = platform_legacy_resume(dev);
}
return ret;
}
int platform_pm_poweroff(struct device *dev)
{
struct device_driver *drv = dev->driver;
int ret = 0;
if (!drv)
return 0;
if (drv->pm) {
if (drv->pm->poweroff)
ret = drv->pm->poweroff(dev);
} else {
ret = platform_legacy_suspend(dev, PMSG_HIBERNATE);
}
return ret;
}
int platform_pm_restore(struct device *dev)
{
struct device_driver *drv = dev->driver;
int ret = 0;
if (!drv)
return 0;
if (drv->pm) {
if (drv->pm->restore)
ret = drv->pm->restore(dev);
} else {
ret = platform_legacy_resume(dev);
}
return ret;
}
#endif /* CONFIG_HIBERNATE_CALLBACKS */
int platform_dma_configure(struct device *dev)
{
enum dev_dma_attr attr;
int ret = 0;
if (dev->of_node) {
ret = of_dma_configure(dev, dev->of_node, true);
} else if (has_acpi_companion(dev)) {
attr = acpi_get_dma_attr(to_acpi_device_node(dev->fwnode));
ret = acpi_dma_configure(dev, attr);
}
return ret;
}
static const struct dev_pm_ops platform_dev_pm_ops = {
.runtime_suspend = pm_generic_runtime_suspend,
.runtime_resume = pm_generic_runtime_resume,
USE_PLATFORM_PM_SLEEP_OPS
};
struct bus_type platform_bus_type = {
.name = "platform",
.dev_groups = platform_dev_groups,
.match = platform_match,
.uevent = platform_uevent,
.dma_configure = platform_dma_configure,
.pm = &platform_dev_pm_ops,
};
EXPORT_SYMBOL_GPL(platform_bus_type);
int __init platform_bus_init(void)
{
int error;
Driver Core: early platform driver V3 of the early platform driver implementation. Platform drivers are great for embedded platforms because we can separate driver configuration from the actual driver. So base addresses, interrupts and other configuration can be kept with the processor or board code, and the platform driver can be reused by many different platforms. For early devices we have nothing today. For instance, to configure early timers and early serial ports we cannot use platform devices. This because the setup order during boot. Timers are needed before the platform driver core code is available. The same goes for early printk support. Early in this case means before initcalls. These early drivers today have their configuration either hard coded or they receive it using some special configuration method. This is working quite well, but if we want to support both regular kernel modules and early devices then we need to have two ways of configuring the same driver. A single way would be better. The early platform driver patch is basically a set of functions that allow drivers to register themselves and architecture code to locate them and probe. Registration happens through early_param(). The time for the probe is decided by the architecture code. See Documentation/driver-model/platform.txt for more details. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-31 05:37:25 +08:00
early_platform_cleanup();
error = device_register(&platform_bus);
if (error) {
put_device(&platform_bus);
return error;
}
error = bus_register(&platform_bus_type);
if (error)
device_unregister(&platform_bus);
of_platform_register_reconfig_notifier();
return error;
}
Driver Core: early platform driver V3 of the early platform driver implementation. Platform drivers are great for embedded platforms because we can separate driver configuration from the actual driver. So base addresses, interrupts and other configuration can be kept with the processor or board code, and the platform driver can be reused by many different platforms. For early devices we have nothing today. For instance, to configure early timers and early serial ports we cannot use platform devices. This because the setup order during boot. Timers are needed before the platform driver core code is available. The same goes for early printk support. Early in this case means before initcalls. These early drivers today have their configuration either hard coded or they receive it using some special configuration method. This is working quite well, but if we want to support both regular kernel modules and early devices then we need to have two ways of configuring the same driver. A single way would be better. The early platform driver patch is basically a set of functions that allow drivers to register themselves and architecture code to locate them and probe. Registration happens through early_param(). The time for the probe is decided by the architecture code. See Documentation/driver-model/platform.txt for more details. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-31 05:37:25 +08:00
static __initdata LIST_HEAD(early_platform_driver_list);
static __initdata LIST_HEAD(early_platform_device_list);
/**
* early_platform_driver_register - register early platform driver
* @epdrv: early_platform driver structure
Driver Core: early platform driver V3 of the early platform driver implementation. Platform drivers are great for embedded platforms because we can separate driver configuration from the actual driver. So base addresses, interrupts and other configuration can be kept with the processor or board code, and the platform driver can be reused by many different platforms. For early devices we have nothing today. For instance, to configure early timers and early serial ports we cannot use platform devices. This because the setup order during boot. Timers are needed before the platform driver core code is available. The same goes for early printk support. Early in this case means before initcalls. These early drivers today have their configuration either hard coded or they receive it using some special configuration method. This is working quite well, but if we want to support both regular kernel modules and early devices then we need to have two ways of configuring the same driver. A single way would be better. The early platform driver patch is basically a set of functions that allow drivers to register themselves and architecture code to locate them and probe. Registration happens through early_param(). The time for the probe is decided by the architecture code. See Documentation/driver-model/platform.txt for more details. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-31 05:37:25 +08:00
* @buf: string passed from early_param()
*
* Helper function for early_platform_init() / early_platform_init_buffer()
Driver Core: early platform driver V3 of the early platform driver implementation. Platform drivers are great for embedded platforms because we can separate driver configuration from the actual driver. So base addresses, interrupts and other configuration can be kept with the processor or board code, and the platform driver can be reused by many different platforms. For early devices we have nothing today. For instance, to configure early timers and early serial ports we cannot use platform devices. This because the setup order during boot. Timers are needed before the platform driver core code is available. The same goes for early printk support. Early in this case means before initcalls. These early drivers today have their configuration either hard coded or they receive it using some special configuration method. This is working quite well, but if we want to support both regular kernel modules and early devices then we need to have two ways of configuring the same driver. A single way would be better. The early platform driver patch is basically a set of functions that allow drivers to register themselves and architecture code to locate them and probe. Registration happens through early_param(). The time for the probe is decided by the architecture code. See Documentation/driver-model/platform.txt for more details. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-31 05:37:25 +08:00
*/
int __init early_platform_driver_register(struct early_platform_driver *epdrv,
char *buf)
{
char *tmp;
Driver Core: early platform driver V3 of the early platform driver implementation. Platform drivers are great for embedded platforms because we can separate driver configuration from the actual driver. So base addresses, interrupts and other configuration can be kept with the processor or board code, and the platform driver can be reused by many different platforms. For early devices we have nothing today. For instance, to configure early timers and early serial ports we cannot use platform devices. This because the setup order during boot. Timers are needed before the platform driver core code is available. The same goes for early printk support. Early in this case means before initcalls. These early drivers today have their configuration either hard coded or they receive it using some special configuration method. This is working quite well, but if we want to support both regular kernel modules and early devices then we need to have two ways of configuring the same driver. A single way would be better. The early platform driver patch is basically a set of functions that allow drivers to register themselves and architecture code to locate them and probe. Registration happens through early_param(). The time for the probe is decided by the architecture code. See Documentation/driver-model/platform.txt for more details. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-31 05:37:25 +08:00
int n;
/* Simply add the driver to the end of the global list.
* Drivers will by default be put on the list in compiled-in order.
*/
if (!epdrv->list.next) {
INIT_LIST_HEAD(&epdrv->list);
list_add_tail(&epdrv->list, &early_platform_driver_list);
}
/* If the user has specified device then make sure the driver
* gets prioritized. The driver of the last device specified on
* command line will be put first on the list.
*/
n = strlen(epdrv->pdrv->driver.name);
if (buf && !strncmp(buf, epdrv->pdrv->driver.name, n)) {
list_move(&epdrv->list, &early_platform_driver_list);
/* Allow passing parameters after device name */
if (buf[n] == '\0' || buf[n] == ',')
Driver Core: early platform driver V3 of the early platform driver implementation. Platform drivers are great for embedded platforms because we can separate driver configuration from the actual driver. So base addresses, interrupts and other configuration can be kept with the processor or board code, and the platform driver can be reused by many different platforms. For early devices we have nothing today. For instance, to configure early timers and early serial ports we cannot use platform devices. This because the setup order during boot. Timers are needed before the platform driver core code is available. The same goes for early printk support. Early in this case means before initcalls. These early drivers today have their configuration either hard coded or they receive it using some special configuration method. This is working quite well, but if we want to support both regular kernel modules and early devices then we need to have two ways of configuring the same driver. A single way would be better. The early platform driver patch is basically a set of functions that allow drivers to register themselves and architecture code to locate them and probe. Registration happens through early_param(). The time for the probe is decided by the architecture code. See Documentation/driver-model/platform.txt for more details. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-31 05:37:25 +08:00
epdrv->requested_id = -1;
else {
epdrv->requested_id = simple_strtoul(&buf[n + 1],
&tmp, 10);
if (buf[n] != '.' || (tmp == &buf[n + 1])) {
epdrv->requested_id = EARLY_PLATFORM_ID_ERROR;
n = 0;
} else
n += strcspn(&buf[n + 1], ",") + 1;
}
if (buf[n] == ',')
n++;
if (epdrv->bufsize) {
memcpy(epdrv->buffer, &buf[n],
min_t(int, epdrv->bufsize, strlen(&buf[n]) + 1));
epdrv->buffer[epdrv->bufsize - 1] = '\0';
}
Driver Core: early platform driver V3 of the early platform driver implementation. Platform drivers are great for embedded platforms because we can separate driver configuration from the actual driver. So base addresses, interrupts and other configuration can be kept with the processor or board code, and the platform driver can be reused by many different platforms. For early devices we have nothing today. For instance, to configure early timers and early serial ports we cannot use platform devices. This because the setup order during boot. Timers are needed before the platform driver core code is available. The same goes for early printk support. Early in this case means before initcalls. These early drivers today have their configuration either hard coded or they receive it using some special configuration method. This is working quite well, but if we want to support both regular kernel modules and early devices then we need to have two ways of configuring the same driver. A single way would be better. The early platform driver patch is basically a set of functions that allow drivers to register themselves and architecture code to locate them and probe. Registration happens through early_param(). The time for the probe is decided by the architecture code. See Documentation/driver-model/platform.txt for more details. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-31 05:37:25 +08:00
}
return 0;
}
/**
* early_platform_add_devices - adds a number of early platform devices
Driver Core: early platform driver V3 of the early platform driver implementation. Platform drivers are great for embedded platforms because we can separate driver configuration from the actual driver. So base addresses, interrupts and other configuration can be kept with the processor or board code, and the platform driver can be reused by many different platforms. For early devices we have nothing today. For instance, to configure early timers and early serial ports we cannot use platform devices. This because the setup order during boot. Timers are needed before the platform driver core code is available. The same goes for early printk support. Early in this case means before initcalls. These early drivers today have their configuration either hard coded or they receive it using some special configuration method. This is working quite well, but if we want to support both regular kernel modules and early devices then we need to have two ways of configuring the same driver. A single way would be better. The early platform driver patch is basically a set of functions that allow drivers to register themselves and architecture code to locate them and probe. Registration happens through early_param(). The time for the probe is decided by the architecture code. See Documentation/driver-model/platform.txt for more details. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-31 05:37:25 +08:00
* @devs: array of early platform devices to add
* @num: number of early platform devices in array
*
* Used by early architecture code to register early platform devices and
* their platform data.
Driver Core: early platform driver V3 of the early platform driver implementation. Platform drivers are great for embedded platforms because we can separate driver configuration from the actual driver. So base addresses, interrupts and other configuration can be kept with the processor or board code, and the platform driver can be reused by many different platforms. For early devices we have nothing today. For instance, to configure early timers and early serial ports we cannot use platform devices. This because the setup order during boot. Timers are needed before the platform driver core code is available. The same goes for early printk support. Early in this case means before initcalls. These early drivers today have their configuration either hard coded or they receive it using some special configuration method. This is working quite well, but if we want to support both regular kernel modules and early devices then we need to have two ways of configuring the same driver. A single way would be better. The early platform driver patch is basically a set of functions that allow drivers to register themselves and architecture code to locate them and probe. Registration happens through early_param(). The time for the probe is decided by the architecture code. See Documentation/driver-model/platform.txt for more details. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-31 05:37:25 +08:00
*/
void __init early_platform_add_devices(struct platform_device **devs, int num)
{
struct device *dev;
int i;
/* simply add the devices to list */
for (i = 0; i < num; i++) {
dev = &devs[i]->dev;
if (!dev->devres_head.next) {
pm_runtime_early_init(dev);
Driver Core: early platform driver V3 of the early platform driver implementation. Platform drivers are great for embedded platforms because we can separate driver configuration from the actual driver. So base addresses, interrupts and other configuration can be kept with the processor or board code, and the platform driver can be reused by many different platforms. For early devices we have nothing today. For instance, to configure early timers and early serial ports we cannot use platform devices. This because the setup order during boot. Timers are needed before the platform driver core code is available. The same goes for early printk support. Early in this case means before initcalls. These early drivers today have their configuration either hard coded or they receive it using some special configuration method. This is working quite well, but if we want to support both regular kernel modules and early devices then we need to have two ways of configuring the same driver. A single way would be better. The early platform driver patch is basically a set of functions that allow drivers to register themselves and architecture code to locate them and probe. Registration happens through early_param(). The time for the probe is decided by the architecture code. See Documentation/driver-model/platform.txt for more details. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-31 05:37:25 +08:00
INIT_LIST_HEAD(&dev->devres_head);
list_add_tail(&dev->devres_head,
&early_platform_device_list);
}
}
}
/**
* early_platform_driver_register_all - register early platform drivers
Driver Core: early platform driver V3 of the early platform driver implementation. Platform drivers are great for embedded platforms because we can separate driver configuration from the actual driver. So base addresses, interrupts and other configuration can be kept with the processor or board code, and the platform driver can be reused by many different platforms. For early devices we have nothing today. For instance, to configure early timers and early serial ports we cannot use platform devices. This because the setup order during boot. Timers are needed before the platform driver core code is available. The same goes for early printk support. Early in this case means before initcalls. These early drivers today have their configuration either hard coded or they receive it using some special configuration method. This is working quite well, but if we want to support both regular kernel modules and early devices then we need to have two ways of configuring the same driver. A single way would be better. The early platform driver patch is basically a set of functions that allow drivers to register themselves and architecture code to locate them and probe. Registration happens through early_param(). The time for the probe is decided by the architecture code. See Documentation/driver-model/platform.txt for more details. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-31 05:37:25 +08:00
* @class_str: string to identify early platform driver class
*
* Used by architecture code to register all early platform drivers
* for a certain class. If omitted then only early platform drivers
* with matching kernel command line class parameters will be registered.
Driver Core: early platform driver V3 of the early platform driver implementation. Platform drivers are great for embedded platforms because we can separate driver configuration from the actual driver. So base addresses, interrupts and other configuration can be kept with the processor or board code, and the platform driver can be reused by many different platforms. For early devices we have nothing today. For instance, to configure early timers and early serial ports we cannot use platform devices. This because the setup order during boot. Timers are needed before the platform driver core code is available. The same goes for early printk support. Early in this case means before initcalls. These early drivers today have their configuration either hard coded or they receive it using some special configuration method. This is working quite well, but if we want to support both regular kernel modules and early devices then we need to have two ways of configuring the same driver. A single way would be better. The early platform driver patch is basically a set of functions that allow drivers to register themselves and architecture code to locate them and probe. Registration happens through early_param(). The time for the probe is decided by the architecture code. See Documentation/driver-model/platform.txt for more details. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-31 05:37:25 +08:00
*/
void __init early_platform_driver_register_all(char *class_str)
{
/* The "class_str" parameter may or may not be present on the kernel
* command line. If it is present then there may be more than one
* matching parameter.
*
* Since we register our early platform drivers using early_param()
* we need to make sure that they also get registered in the case
* when the parameter is missing from the kernel command line.
*
* We use parse_early_options() to make sure the early_param() gets
* called at least once. The early_param() may be called more than
* once since the name of the preferred device may be specified on
* the kernel command line. early_platform_driver_register() handles
* this case for us.
*/
parse_early_options(class_str);
}
/**
* early_platform_match - find early platform device matching driver
* @epdrv: early platform driver structure
Driver Core: early platform driver V3 of the early platform driver implementation. Platform drivers are great for embedded platforms because we can separate driver configuration from the actual driver. So base addresses, interrupts and other configuration can be kept with the processor or board code, and the platform driver can be reused by many different platforms. For early devices we have nothing today. For instance, to configure early timers and early serial ports we cannot use platform devices. This because the setup order during boot. Timers are needed before the platform driver core code is available. The same goes for early printk support. Early in this case means before initcalls. These early drivers today have their configuration either hard coded or they receive it using some special configuration method. This is working quite well, but if we want to support both regular kernel modules and early devices then we need to have two ways of configuring the same driver. A single way would be better. The early platform driver patch is basically a set of functions that allow drivers to register themselves and architecture code to locate them and probe. Registration happens through early_param(). The time for the probe is decided by the architecture code. See Documentation/driver-model/platform.txt for more details. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-31 05:37:25 +08:00
* @id: id to match against
*/
static struct platform_device * __init
Driver Core: early platform driver V3 of the early platform driver implementation. Platform drivers are great for embedded platforms because we can separate driver configuration from the actual driver. So base addresses, interrupts and other configuration can be kept with the processor or board code, and the platform driver can be reused by many different platforms. For early devices we have nothing today. For instance, to configure early timers and early serial ports we cannot use platform devices. This because the setup order during boot. Timers are needed before the platform driver core code is available. The same goes for early printk support. Early in this case means before initcalls. These early drivers today have their configuration either hard coded or they receive it using some special configuration method. This is working quite well, but if we want to support both regular kernel modules and early devices then we need to have two ways of configuring the same driver. A single way would be better. The early platform driver patch is basically a set of functions that allow drivers to register themselves and architecture code to locate them and probe. Registration happens through early_param(). The time for the probe is decided by the architecture code. See Documentation/driver-model/platform.txt for more details. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-31 05:37:25 +08:00
early_platform_match(struct early_platform_driver *epdrv, int id)
{
struct platform_device *pd;
list_for_each_entry(pd, &early_platform_device_list, dev.devres_head)
if (platform_match(&pd->dev, &epdrv->pdrv->driver))
if (pd->id == id)
return pd;
return NULL;
}
/**
* early_platform_left - check if early platform driver has matching devices
* @epdrv: early platform driver structure
Driver Core: early platform driver V3 of the early platform driver implementation. Platform drivers are great for embedded platforms because we can separate driver configuration from the actual driver. So base addresses, interrupts and other configuration can be kept with the processor or board code, and the platform driver can be reused by many different platforms. For early devices we have nothing today. For instance, to configure early timers and early serial ports we cannot use platform devices. This because the setup order during boot. Timers are needed before the platform driver core code is available. The same goes for early printk support. Early in this case means before initcalls. These early drivers today have their configuration either hard coded or they receive it using some special configuration method. This is working quite well, but if we want to support both regular kernel modules and early devices then we need to have two ways of configuring the same driver. A single way would be better. The early platform driver patch is basically a set of functions that allow drivers to register themselves and architecture code to locate them and probe. Registration happens through early_param(). The time for the probe is decided by the architecture code. See Documentation/driver-model/platform.txt for more details. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-31 05:37:25 +08:00
* @id: return true if id or above exists
*/
static int __init early_platform_left(struct early_platform_driver *epdrv,
Driver Core: early platform driver V3 of the early platform driver implementation. Platform drivers are great for embedded platforms because we can separate driver configuration from the actual driver. So base addresses, interrupts and other configuration can be kept with the processor or board code, and the platform driver can be reused by many different platforms. For early devices we have nothing today. For instance, to configure early timers and early serial ports we cannot use platform devices. This because the setup order during boot. Timers are needed before the platform driver core code is available. The same goes for early printk support. Early in this case means before initcalls. These early drivers today have their configuration either hard coded or they receive it using some special configuration method. This is working quite well, but if we want to support both regular kernel modules and early devices then we need to have two ways of configuring the same driver. A single way would be better. The early platform driver patch is basically a set of functions that allow drivers to register themselves and architecture code to locate them and probe. Registration happens through early_param(). The time for the probe is decided by the architecture code. See Documentation/driver-model/platform.txt for more details. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-31 05:37:25 +08:00
int id)
{
struct platform_device *pd;
list_for_each_entry(pd, &early_platform_device_list, dev.devres_head)
if (platform_match(&pd->dev, &epdrv->pdrv->driver))
if (pd->id >= id)
return 1;
return 0;
}
/**
* early_platform_driver_probe_id - probe drivers matching class_str and id
Driver Core: early platform driver V3 of the early platform driver implementation. Platform drivers are great for embedded platforms because we can separate driver configuration from the actual driver. So base addresses, interrupts and other configuration can be kept with the processor or board code, and the platform driver can be reused by many different platforms. For early devices we have nothing today. For instance, to configure early timers and early serial ports we cannot use platform devices. This because the setup order during boot. Timers are needed before the platform driver core code is available. The same goes for early printk support. Early in this case means before initcalls. These early drivers today have their configuration either hard coded or they receive it using some special configuration method. This is working quite well, but if we want to support both regular kernel modules and early devices then we need to have two ways of configuring the same driver. A single way would be better. The early platform driver patch is basically a set of functions that allow drivers to register themselves and architecture code to locate them and probe. Registration happens through early_param(). The time for the probe is decided by the architecture code. See Documentation/driver-model/platform.txt for more details. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-31 05:37:25 +08:00
* @class_str: string to identify early platform driver class
* @id: id to match against
* @nr_probe: number of platform devices to successfully probe before exiting
*/
static int __init early_platform_driver_probe_id(char *class_str,
int id,
int nr_probe)
{
struct early_platform_driver *epdrv;
struct platform_device *match;
int match_id;
int n = 0;
int left = 0;
list_for_each_entry(epdrv, &early_platform_driver_list, list) {
/* only use drivers matching our class_str */
if (strcmp(class_str, epdrv->class_str))
continue;
if (id == -2) {
match_id = epdrv->requested_id;
left = 1;
} else {
match_id = id;
left += early_platform_left(epdrv, id);
/* skip requested id */
switch (epdrv->requested_id) {
case EARLY_PLATFORM_ID_ERROR:
case EARLY_PLATFORM_ID_UNSET:
break;
default:
if (epdrv->requested_id == id)
match_id = EARLY_PLATFORM_ID_UNSET;
}
}
switch (match_id) {
case EARLY_PLATFORM_ID_ERROR:
pr_warn("%s: unable to parse %s parameter\n",
class_str, epdrv->pdrv->driver.name);
Driver Core: early platform driver V3 of the early platform driver implementation. Platform drivers are great for embedded platforms because we can separate driver configuration from the actual driver. So base addresses, interrupts and other configuration can be kept with the processor or board code, and the platform driver can be reused by many different platforms. For early devices we have nothing today. For instance, to configure early timers and early serial ports we cannot use platform devices. This because the setup order during boot. Timers are needed before the platform driver core code is available. The same goes for early printk support. Early in this case means before initcalls. These early drivers today have their configuration either hard coded or they receive it using some special configuration method. This is working quite well, but if we want to support both regular kernel modules and early devices then we need to have two ways of configuring the same driver. A single way would be better. The early platform driver patch is basically a set of functions that allow drivers to register themselves and architecture code to locate them and probe. Registration happens through early_param(). The time for the probe is decided by the architecture code. See Documentation/driver-model/platform.txt for more details. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-31 05:37:25 +08:00
/* fall-through */
case EARLY_PLATFORM_ID_UNSET:
match = NULL;
break;
default:
match = early_platform_match(epdrv, match_id);
}
if (match) {
/*
* Set up a sensible init_name to enable
* dev_name() and others to be used before the
* rest of the driver core is initialized.
*/
if (!match->dev.init_name && slab_is_available()) {
if (match->id != -1)
match->dev.init_name =
kasprintf(GFP_KERNEL, "%s.%d",
match->name,
match->id);
else
match->dev.init_name =
kasprintf(GFP_KERNEL, "%s",
match->name);
if (!match->dev.init_name)
return -ENOMEM;
}
Driver Core: early platform driver V3 of the early platform driver implementation. Platform drivers are great for embedded platforms because we can separate driver configuration from the actual driver. So base addresses, interrupts and other configuration can be kept with the processor or board code, and the platform driver can be reused by many different platforms. For early devices we have nothing today. For instance, to configure early timers and early serial ports we cannot use platform devices. This because the setup order during boot. Timers are needed before the platform driver core code is available. The same goes for early printk support. Early in this case means before initcalls. These early drivers today have their configuration either hard coded or they receive it using some special configuration method. This is working quite well, but if we want to support both regular kernel modules and early devices then we need to have two ways of configuring the same driver. A single way would be better. The early platform driver patch is basically a set of functions that allow drivers to register themselves and architecture code to locate them and probe. Registration happens through early_param(). The time for the probe is decided by the architecture code. See Documentation/driver-model/platform.txt for more details. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-31 05:37:25 +08:00
if (epdrv->pdrv->probe(match))
pr_warn("%s: unable to probe %s early.\n",
class_str, match->name);
Driver Core: early platform driver V3 of the early platform driver implementation. Platform drivers are great for embedded platforms because we can separate driver configuration from the actual driver. So base addresses, interrupts and other configuration can be kept with the processor or board code, and the platform driver can be reused by many different platforms. For early devices we have nothing today. For instance, to configure early timers and early serial ports we cannot use platform devices. This because the setup order during boot. Timers are needed before the platform driver core code is available. The same goes for early printk support. Early in this case means before initcalls. These early drivers today have their configuration either hard coded or they receive it using some special configuration method. This is working quite well, but if we want to support both regular kernel modules and early devices then we need to have two ways of configuring the same driver. A single way would be better. The early platform driver patch is basically a set of functions that allow drivers to register themselves and architecture code to locate them and probe. Registration happens through early_param(). The time for the probe is decided by the architecture code. See Documentation/driver-model/platform.txt for more details. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-31 05:37:25 +08:00
else
n++;
}
if (n >= nr_probe)
break;
}
if (left)
return n;
else
return -ENODEV;
}
/**
* early_platform_driver_probe - probe a class of registered drivers
Driver Core: early platform driver V3 of the early platform driver implementation. Platform drivers are great for embedded platforms because we can separate driver configuration from the actual driver. So base addresses, interrupts and other configuration can be kept with the processor or board code, and the platform driver can be reused by many different platforms. For early devices we have nothing today. For instance, to configure early timers and early serial ports we cannot use platform devices. This because the setup order during boot. Timers are needed before the platform driver core code is available. The same goes for early printk support. Early in this case means before initcalls. These early drivers today have their configuration either hard coded or they receive it using some special configuration method. This is working quite well, but if we want to support both regular kernel modules and early devices then we need to have two ways of configuring the same driver. A single way would be better. The early platform driver patch is basically a set of functions that allow drivers to register themselves and architecture code to locate them and probe. Registration happens through early_param(). The time for the probe is decided by the architecture code. See Documentation/driver-model/platform.txt for more details. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-31 05:37:25 +08:00
* @class_str: string to identify early platform driver class
* @nr_probe: number of platform devices to successfully probe before exiting
* @user_only: only probe user specified early platform devices
*
* Used by architecture code to probe registered early platform drivers
* within a certain class. For probe to happen a registered early platform
* device matching a registered early platform driver is needed.
Driver Core: early platform driver V3 of the early platform driver implementation. Platform drivers are great for embedded platforms because we can separate driver configuration from the actual driver. So base addresses, interrupts and other configuration can be kept with the processor or board code, and the platform driver can be reused by many different platforms. For early devices we have nothing today. For instance, to configure early timers and early serial ports we cannot use platform devices. This because the setup order during boot. Timers are needed before the platform driver core code is available. The same goes for early printk support. Early in this case means before initcalls. These early drivers today have their configuration either hard coded or they receive it using some special configuration method. This is working quite well, but if we want to support both regular kernel modules and early devices then we need to have two ways of configuring the same driver. A single way would be better. The early platform driver patch is basically a set of functions that allow drivers to register themselves and architecture code to locate them and probe. Registration happens through early_param(). The time for the probe is decided by the architecture code. See Documentation/driver-model/platform.txt for more details. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Magnus Damm <damm@igel.co.jp> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: David Brownell <david-b@pacbell.net> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-31 05:37:25 +08:00
*/
int __init early_platform_driver_probe(char *class_str,
int nr_probe,
int user_only)
{
int k, n, i;
n = 0;
for (i = -2; n < nr_probe; i++) {
k = early_platform_driver_probe_id(class_str, i, nr_probe - n);
if (k < 0)
break;
n += k;
if (user_only)
break;
}
return n;
}
/**
* early_platform_cleanup - clean up early platform code
*/
void __init early_platform_cleanup(void)
{
struct platform_device *pd, *pd2;
/* clean up the devres list used to chain devices */
list_for_each_entry_safe(pd, pd2, &early_platform_device_list,
dev.devres_head) {
list_del(&pd->dev.devres_head);
memset(&pd->dev.devres_head, 0, sizeof(pd->dev.devres_head));
}
}