355 lines
8.7 KiB
C
355 lines
8.7 KiB
C
|
// SPDX-License-Identifier: GPL-2.0
|
||
|
|
// Copyright (c) 2019 Crane Merchandising Systems. All rights reserved.
|
||
|
|
// Copyright (C) 2019 Oleh Kravchenko <oleg@kaa.org.ua>
|
||
|
|
|
||
|
|
#include <linux/delay.h>
|
||
|
|
#include <linux/leds.h>
|
||
|
|
#include <linux/module.h>
|
||
|
|
#include <linux/of_device.h>
|
||
|
|
#include <linux/spi/spi.h>
|
||
|
|
|
||
|
|
/*
|
||
|
|
* EL15203000 SPI protocol description:
|
||
|
|
* +-----+---------+
|
||
|
|
* | LED | COMMAND |
|
||
|
|
* +-----+---------+
|
||
|
|
* | 1 | 1 |
|
||
|
|
* +-----+---------+
|
||
|
|
* (*) LEDs MCU board expects 20 msec delay per byte.
|
||
|
|
*
|
||
|
|
* LEDs:
|
||
|
|
* +----------+--------------+-------------------------------------------+
|
||
|
|
* | ID | NAME | DESCRIPTION |
|
||
|
|
* +----------+--------------+-------------------------------------------+
|
||
|
|
* | 'P' 0x50 | Pipe | Consists from 5 LEDs, controlled by board |
|
||
|
|
* +----------+--------------+-------------------------------------------+
|
||
|
|
* | 'S' 0x53 | Screen frame | Light tube around the screen |
|
||
|
|
* +----------+--------------+-------------------------------------------+
|
||
|
|
* | 'V' 0x56 | Vending area | Highlights a cup of coffee |
|
||
|
|
* +----------+--------------+-------------------------------------------+
|
||
|
|
*
|
||
|
|
* COMMAND:
|
||
|
|
* +----------+-----------------+--------------+--------------+
|
||
|
|
* | VALUES | PIPE | SCREEN FRAME | VENDING AREA |
|
||
|
|
* +----------+-----------------+--------------+--------------+
|
||
|
|
* | '0' 0x30 | Off |
|
||
|
|
* +----------+-----------------------------------------------+
|
||
|
|
* | '1' 0x31 | On |
|
||
|
|
* +----------+-----------------+--------------+--------------+
|
||
|
|
* | '2' 0x32 | Cascade | Breathing |
|
||
|
|
* +----------+-----------------+--------------+
|
||
|
|
* | '3' 0x33 | Inverse cascade |
|
||
|
|
* +----------+-----------------+
|
||
|
|
* | '4' 0x34 | Bounce |
|
||
|
|
* +----------+-----------------+
|
||
|
|
* | '5' 0x35 | Inverse bounce |
|
||
|
|
* +----------+-----------------+
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* EL15203000 default settings */
|
||
|
|
#define EL_FW_DELAY_USEC 20000ul
|
||
|
|
#define EL_PATTERN_DELAY_MSEC 800u
|
||
|
|
#define EL_PATTERN_LEN 10u
|
||
|
|
#define EL_PATTERN_HALF_LEN (EL_PATTERN_LEN / 2)
|
||
|
|
|
||
|
|
enum el15203000_command {
|
||
|
|
/* for all LEDs */
|
||
|
|
EL_OFF = '0',
|
||
|
|
EL_ON = '1',
|
||
|
|
|
||
|
|
/* for Screen LED */
|
||
|
|
EL_SCREEN_BREATHING = '2',
|
||
|
|
|
||
|
|
/* for Pipe LED */
|
||
|
|
EL_PIPE_CASCADE = '2',
|
||
|
|
EL_PIPE_INV_CASCADE = '3',
|
||
|
|
EL_PIPE_BOUNCE = '4',
|
||
|
|
EL_PIPE_INV_BOUNCE = '5',
|
||
|
|
};
|
||
|
|
|
||
|
|
struct el15203000_led {
|
||
|
|
struct el15203000 *priv;
|
||
|
|
struct led_classdev ldev;
|
||
|
|
u32 reg;
|
||
|
|
};
|
||
|
|
|
||
|
|
struct el15203000 {
|
||
|
|
struct device *dev;
|
||
|
|
struct mutex lock;
|
||
|
|
struct spi_device *spi;
|
||
|
|
unsigned long delay;
|
||
|
|
size_t count;
|
||
|
|
struct el15203000_led leds[];
|
||
|
|
};
|
||
|
|
|
||
|
|
static int el15203000_cmd(struct el15203000_led *led, u8 brightness)
|
||
|
|
{
|
||
|
|
int ret;
|
||
|
|
u8 cmd[2];
|
||
|
|
size_t i;
|
||
|
|
|
||
|
|
mutex_lock(&led->priv->lock);
|
||
|
|
|
||
|
|
dev_dbg(led->priv->dev, "Set brightness of 0x%02x(%c) to 0x%02x(%c)",
|
||
|
|
led->reg, led->reg, brightness, brightness);
|
||
|
|
|
||
|
|
/* to avoid SPI mistiming with firmware we should wait some time */
|
||
|
|
if (time_after(led->priv->delay, jiffies)) {
|
||
|
|
dev_dbg(led->priv->dev, "Wait %luus to sync",
|
||
|
|
EL_FW_DELAY_USEC);
|
||
|
|
|
||
|
|
usleep_range(EL_FW_DELAY_USEC,
|
||
|
|
EL_FW_DELAY_USEC + 1);
|
||
|
|
}
|
||
|
|
|
||
|
|
cmd[0] = led->reg;
|
||
|
|
cmd[1] = brightness;
|
||
|
|
|
||
|
|
for (i = 0; i < ARRAY_SIZE(cmd); i++) {
|
||
|
|
if (i)
|
||
|
|
usleep_range(EL_FW_DELAY_USEC,
|
||
|
|
EL_FW_DELAY_USEC + 1);
|
||
|
|
|
||
|
|
ret = spi_write(led->priv->spi, &cmd[i], sizeof(cmd[i]));
|
||
|
|
if (ret) {
|
||
|
|
dev_err(led->priv->dev,
|
||
|
|
"spi_write() error %d", ret);
|
||
|
|
break;
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
led->priv->delay = jiffies + usecs_to_jiffies(EL_FW_DELAY_USEC);
|
||
|
|
|
||
|
|
mutex_unlock(&led->priv->lock);
|
||
|
|
|
||
|
|
return ret;
|
||
|
|
}
|
||
|
|
|
||
|
|
static int el15203000_set_blocking(struct led_classdev *ldev,
|
||
|
|
enum led_brightness brightness)
|
||
|
|
{
|
||
|
|
struct el15203000_led *led = container_of(ldev,
|
||
|
|
struct el15203000_led,
|
||
|
|
ldev);
|
||
|
|
|
||
|
|
return el15203000_cmd(led, brightness == LED_OFF ? EL_OFF : EL_ON);
|
||
|
|
}
|
||
|
|
|
||
|
|
static int el15203000_pattern_set_S(struct led_classdev *ldev,
|
||
|
|
struct led_pattern *pattern,
|
||
|
|
u32 len, int repeat)
|
||
|
|
{
|
||
|
|
struct el15203000_led *led = container_of(ldev,
|
||
|
|
struct el15203000_led,
|
||
|
|
ldev);
|
||
|
|
|
||
|
|
if (repeat > 0 || len != 2 ||
|
||
|
|
pattern[0].delta_t != 4000 || pattern[0].brightness != 0 ||
|
||
|
|
pattern[1].delta_t != 4000 || pattern[1].brightness != 1)
|
||
|
|
return -EINVAL;
|
||
|
|
|
||
|
|
dev_dbg(led->priv->dev, "Breathing mode for 0x%02x(%c)",
|
||
|
|
led->reg, led->reg);
|
||
|
|
|
||
|
|
return el15203000_cmd(led, EL_SCREEN_BREATHING);
|
||
|
|
}
|
||
|
|
|
||
|
|
static bool is_cascade(const struct led_pattern *pattern, u32 len,
|
||
|
|
bool inv, bool right)
|
||
|
|
{
|
||
|
|
int val, t;
|
||
|
|
u32 i;
|
||
|
|
|
||
|
|
if (len != EL_PATTERN_HALF_LEN)
|
||
|
|
return false;
|
||
|
|
|
||
|
|
val = right ? BIT(4) : BIT(0);
|
||
|
|
|
||
|
|
for (i = 0; i < len; i++) {
|
||
|
|
t = inv ? ~val & GENMASK(4, 0) : val;
|
||
|
|
|
||
|
|
if (pattern[i].delta_t != EL_PATTERN_DELAY_MSEC ||
|
||
|
|
pattern[i].brightness != t)
|
||
|
|
return false;
|
||
|
|
|
||
|
|
val = right ? val >> 1 : val << 1;
|
||
|
|
}
|
||
|
|
|
||
|
|
return true;
|
||
|
|
}
|
||
|
|
|
||
|
|
static bool is_bounce(const struct led_pattern *pattern, u32 len, bool inv)
|
||
|
|
{
|
||
|
|
if (len != EL_PATTERN_LEN)
|
||
|
|
return false;
|
||
|
|
|
||
|
|
return is_cascade(pattern, EL_PATTERN_HALF_LEN, inv, false) &&
|
||
|
|
is_cascade(pattern + EL_PATTERN_HALF_LEN,
|
||
|
|
EL_PATTERN_HALF_LEN, inv, true);
|
||
|
|
}
|
||
|
|
|
||
|
|
static int el15203000_pattern_set_P(struct led_classdev *ldev,
|
||
|
|
struct led_pattern *pattern,
|
||
|
|
u32 len, int repeat)
|
||
|
|
{
|
||
|
|
u8 cmd;
|
||
|
|
struct el15203000_led *led = container_of(ldev,
|
||
|
|
struct el15203000_led,
|
||
|
|
ldev);
|
||
|
|
|
||
|
|
if (repeat > 0)
|
||
|
|
return -EINVAL;
|
||
|
|
|
||
|
|
if (is_cascade(pattern, len, false, false)) {
|
||
|
|
dev_dbg(led->priv->dev, "Cascade mode for 0x%02x(%c)",
|
||
|
|
led->reg, led->reg);
|
||
|
|
|
||
|
|
cmd = EL_PIPE_CASCADE;
|
||
|
|
} else if (is_cascade(pattern, len, true, false)) {
|
||
|
|
dev_dbg(led->priv->dev, "Inverse cascade mode for 0x%02x(%c)",
|
||
|
|
led->reg, led->reg);
|
||
|
|
|
||
|
|
cmd = EL_PIPE_INV_CASCADE;
|
||
|
|
} else if (is_bounce(pattern, len, false)) {
|
||
|
|
dev_dbg(led->priv->dev, "Bounce mode for 0x%02x(%c)",
|
||
|
|
led->reg, led->reg);
|
||
|
|
|
||
|
|
cmd = EL_PIPE_BOUNCE;
|
||
|
|
} else if (is_bounce(pattern, len, true)) {
|
||
|
|
dev_dbg(led->priv->dev, "Inverse bounce mode for 0x%02x(%c)",
|
||
|
|
led->reg, led->reg);
|
||
|
|
|
||
|
|
cmd = EL_PIPE_INV_BOUNCE;
|
||
|
|
} else {
|
||
|
|
dev_err(led->priv->dev, "Invalid hw_pattern for 0x%02x(%c)!",
|
||
|
|
led->reg, led->reg);
|
||
|
|
|
||
|
|
return -EINVAL;
|
||
|
|
}
|
||
|
|
|
||
|
|
return el15203000_cmd(led, cmd);
|
||
|
|
}
|
||
|
|
|
||
|
|
static int el15203000_pattern_clear(struct led_classdev *ldev)
|
||
|
|
{
|
||
|
|
struct el15203000_led *led = container_of(ldev,
|
||
|
|
struct el15203000_led,
|
||
|
|
ldev);
|
||
|
|
|
||
|
|
return el15203000_cmd(led, EL_OFF);
|
||
|
|
}
|
||
|
|
|
||
|
|
static int el15203000_probe_dt(struct el15203000 *priv)
|
||
|
|
{
|
||
|
|
struct el15203000_led *led = priv->leds;
|
||
|
|
struct fwnode_handle *child;
|
||
|
|
int ret;
|
||
|
|
|
||
|
|
device_for_each_child_node(priv->dev, child) {
|
||
|
|
struct led_init_data init_data = {};
|
||
|
|
|
||
|
|
ret = fwnode_property_read_u32(child, "reg", &led->reg);
|
||
|
|
if (ret) {
|
||
|
|
dev_err(priv->dev, "LED without ID number");
|
||
|
|
fwnode_handle_put(child);
|
||
|
|
|
||
|
|
break;
|
||
|
|
}
|
||
|
|
|
||
|
|
if (led->reg > U8_MAX) {
|
||
|
|
dev_err(priv->dev, "LED value %d is invalid", led->reg);
|
||
|
|
fwnode_handle_put(child);
|
||
|
|
|
||
|
|
return -EINVAL;
|
||
|
|
}
|
||
|
|
|
||
|
|
led->priv = priv;
|
||
|
|
led->ldev.max_brightness = LED_ON;
|
||
|
|
led->ldev.brightness_set_blocking = el15203000_set_blocking;
|
||
|
|
|
||
|
|
if (led->reg == 'S') {
|
||
|
|
led->ldev.pattern_set = el15203000_pattern_set_S;
|
||
|
|
led->ldev.pattern_clear = el15203000_pattern_clear;
|
||
|
|
} else if (led->reg == 'P') {
|
||
|
|
led->ldev.pattern_set = el15203000_pattern_set_P;
|
||
|
|
led->ldev.pattern_clear = el15203000_pattern_clear;
|
||
|
|
}
|
||
|
|
|
||
|
|
init_data.fwnode = child;
|
||
|
|
ret = devm_led_classdev_register_ext(priv->dev, &led->ldev,
|
||
|
|
&init_data);
|
||
|
|
if (ret) {
|
||
|
|
dev_err(priv->dev,
|
||
|
|
"failed to register LED device %s, err %d",
|
||
|
|
led->ldev.name, ret);
|
||
|
|
fwnode_handle_put(child);
|
||
|
|
|
||
|
|
break;
|
||
|
|
}
|
||
|
|
|
||
|
|
led++;
|
||
|
|
}
|
||
|
|
|
||
|
|
return ret;
|
||
|
|
}
|
||
|
|
|
||
|
|
static int el15203000_probe(struct spi_device *spi)
|
||
|
|
{
|
||
|
|
struct el15203000 *priv;
|
||
|
|
size_t count;
|
||
|
|
|
||
|
|
count = device_get_child_node_count(&spi->dev);
|
||
|
|
if (!count) {
|
||
|
|
dev_err(&spi->dev, "LEDs are not defined in device tree!");
|
||
|
|
return -ENODEV;
|
||
|
|
}
|
||
|
|
|
||
|
|
priv = devm_kzalloc(&spi->dev, struct_size(priv, leds, count),
|
||
|
|
GFP_KERNEL);
|
||
|
|
if (!priv)
|
||
|
|
return -ENOMEM;
|
||
|
|
|
||
|
|
mutex_init(&priv->lock);
|
||
|
|
priv->count = count;
|
||
|
|
priv->dev = &spi->dev;
|
||
|
|
priv->spi = spi;
|
||
|
|
priv->delay = jiffies -
|
||
|
|
usecs_to_jiffies(EL_FW_DELAY_USEC);
|
||
|
|
|
||
|
|
spi_set_drvdata(spi, priv);
|
||
|
|
|
||
|
|
return el15203000_probe_dt(priv);
|
||
|
|
}
|
||
|
|
|
||
|
|
static int el15203000_remove(struct spi_device *spi)
|
||
|
|
{
|
||
|
|
struct el15203000 *priv = spi_get_drvdata(spi);
|
||
|
|
|
||
|
|
mutex_destroy(&priv->lock);
|
||
|
|
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static const struct of_device_id el15203000_dt_ids[] = {
|
||
|
|
{ .compatible = "crane,el15203000", },
|
||
|
|
{},
|
||
|
|
};
|
||
|
|
|
||
|
|
MODULE_DEVICE_TABLE(of, el15203000_dt_ids);
|
||
|
|
|
||
|
|
static struct spi_driver el15203000_driver = {
|
||
|
|
.probe = el15203000_probe,
|
||
|
|
.remove = el15203000_remove,
|
||
|
|
.driver = {
|
||
|
|
.name = KBUILD_MODNAME,
|
||
|
|
.of_match_table = el15203000_dt_ids,
|
||
|
|
},
|
||
|
|
};
|
||
|
|
|
||
|
|
module_spi_driver(el15203000_driver);
|
||
|
|
|
||
|
|
MODULE_AUTHOR("Oleh Kravchenko <oleg@kaa.org.ua>");
|
||
|
|
MODULE_DESCRIPTION("el15203000 LED driver");
|
||
|
|
MODULE_LICENSE("GPL v2");
|
||
|
|
MODULE_ALIAS("spi:el15203000");
|