OpenCloudOS-Kernel/fs/btrfs/backref.c

2292 lines
60 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2011 STRATO. All rights reserved.
*/
#include <linux/mm.h>
#include <linux/rbtree.h>
#include <trace/events/btrfs.h>
#include "ctree.h"
#include "disk-io.h"
#include "backref.h"
#include "ulist.h"
#include "transaction.h"
#include "delayed-ref.h"
#include "locking.h"
/* Just an arbitrary number so we can be sure this happened */
#define BACKREF_FOUND_SHARED 6
struct extent_inode_elem {
u64 inum;
u64 offset;
struct extent_inode_elem *next;
};
static int check_extent_in_eb(const struct btrfs_key *key,
const struct extent_buffer *eb,
const struct btrfs_file_extent_item *fi,
u64 extent_item_pos,
btrfs: add a flag to iterate_inodes_from_logical to find all extent refs for uncompressed extents The LOGICAL_INO ioctl provides a backward mapping from extent bytenr and offset (encoded as a single logical address) to a list of extent refs. LOGICAL_INO complements TREE_SEARCH, which provides the forward mapping (extent ref -> extent bytenr and offset, or logical address). These are useful capabilities for programs that manipulate extents and extent references from userspace (e.g. dedup and defrag utilities). When the extents are uncompressed (and not encrypted and not other), check_extent_in_eb performs filtering of the extent refs to remove any extent refs which do not contain the same extent offset as the 'logical' parameter's extent offset. This prevents LOGICAL_INO from returning references to more than a single block. To find the set of extent references to an uncompressed extent from [a, b), userspace has to run a loop like this pseudocode: for (i = a; i < b; ++i) extent_ref_set += LOGICAL_INO(i); At each iteration of the loop (up to 32768 iterations for a 128M extent), data we are interested in is collected in the kernel, then deleted by the filter in check_extent_in_eb. When the extents are compressed (or encrypted or other), the 'logical' parameter must be an extent bytenr (the 'a' parameter in the loop). No filtering by extent offset is done (or possible?) so the result is the complete set of extent refs for the entire extent. This removes the need for the loop, since we get all the extent refs in one call. Add an 'ignore_offset' argument to iterate_inodes_from_logical, [...several levels of function call graph...], and check_extent_in_eb, so that we can disable the extent offset filtering for uncompressed extents. This flag can be set by an improved version of the LOGICAL_INO ioctl to get either behavior as desired. There is no functional change in this patch. The new flag is always false. Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Reviewed-by: David Sterba <dsterba@suse.com> [ minor coding style fixes ] Signed-off-by: David Sterba <dsterba@suse.com>
2017-09-23 01:58:45 +08:00
struct extent_inode_elem **eie,
bool ignore_offset)
{
u64 offset = 0;
struct extent_inode_elem *e;
btrfs: add a flag to iterate_inodes_from_logical to find all extent refs for uncompressed extents The LOGICAL_INO ioctl provides a backward mapping from extent bytenr and offset (encoded as a single logical address) to a list of extent refs. LOGICAL_INO complements TREE_SEARCH, which provides the forward mapping (extent ref -> extent bytenr and offset, or logical address). These are useful capabilities for programs that manipulate extents and extent references from userspace (e.g. dedup and defrag utilities). When the extents are uncompressed (and not encrypted and not other), check_extent_in_eb performs filtering of the extent refs to remove any extent refs which do not contain the same extent offset as the 'logical' parameter's extent offset. This prevents LOGICAL_INO from returning references to more than a single block. To find the set of extent references to an uncompressed extent from [a, b), userspace has to run a loop like this pseudocode: for (i = a; i < b; ++i) extent_ref_set += LOGICAL_INO(i); At each iteration of the loop (up to 32768 iterations for a 128M extent), data we are interested in is collected in the kernel, then deleted by the filter in check_extent_in_eb. When the extents are compressed (or encrypted or other), the 'logical' parameter must be an extent bytenr (the 'a' parameter in the loop). No filtering by extent offset is done (or possible?) so the result is the complete set of extent refs for the entire extent. This removes the need for the loop, since we get all the extent refs in one call. Add an 'ignore_offset' argument to iterate_inodes_from_logical, [...several levels of function call graph...], and check_extent_in_eb, so that we can disable the extent offset filtering for uncompressed extents. This flag can be set by an improved version of the LOGICAL_INO ioctl to get either behavior as desired. There is no functional change in this patch. The new flag is always false. Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Reviewed-by: David Sterba <dsterba@suse.com> [ minor coding style fixes ] Signed-off-by: David Sterba <dsterba@suse.com>
2017-09-23 01:58:45 +08:00
if (!ignore_offset &&
!btrfs_file_extent_compression(eb, fi) &&
!btrfs_file_extent_encryption(eb, fi) &&
!btrfs_file_extent_other_encoding(eb, fi)) {
u64 data_offset;
u64 data_len;
data_offset = btrfs_file_extent_offset(eb, fi);
data_len = btrfs_file_extent_num_bytes(eb, fi);
if (extent_item_pos < data_offset ||
extent_item_pos >= data_offset + data_len)
return 1;
offset = extent_item_pos - data_offset;
}
e = kmalloc(sizeof(*e), GFP_NOFS);
if (!e)
return -ENOMEM;
e->next = *eie;
e->inum = key->objectid;
e->offset = key->offset + offset;
*eie = e;
return 0;
}
static void free_inode_elem_list(struct extent_inode_elem *eie)
{
struct extent_inode_elem *eie_next;
for (; eie; eie = eie_next) {
eie_next = eie->next;
kfree(eie);
}
}
static int find_extent_in_eb(const struct extent_buffer *eb,
u64 wanted_disk_byte, u64 extent_item_pos,
btrfs: add a flag to iterate_inodes_from_logical to find all extent refs for uncompressed extents The LOGICAL_INO ioctl provides a backward mapping from extent bytenr and offset (encoded as a single logical address) to a list of extent refs. LOGICAL_INO complements TREE_SEARCH, which provides the forward mapping (extent ref -> extent bytenr and offset, or logical address). These are useful capabilities for programs that manipulate extents and extent references from userspace (e.g. dedup and defrag utilities). When the extents are uncompressed (and not encrypted and not other), check_extent_in_eb performs filtering of the extent refs to remove any extent refs which do not contain the same extent offset as the 'logical' parameter's extent offset. This prevents LOGICAL_INO from returning references to more than a single block. To find the set of extent references to an uncompressed extent from [a, b), userspace has to run a loop like this pseudocode: for (i = a; i < b; ++i) extent_ref_set += LOGICAL_INO(i); At each iteration of the loop (up to 32768 iterations for a 128M extent), data we are interested in is collected in the kernel, then deleted by the filter in check_extent_in_eb. When the extents are compressed (or encrypted or other), the 'logical' parameter must be an extent bytenr (the 'a' parameter in the loop). No filtering by extent offset is done (or possible?) so the result is the complete set of extent refs for the entire extent. This removes the need for the loop, since we get all the extent refs in one call. Add an 'ignore_offset' argument to iterate_inodes_from_logical, [...several levels of function call graph...], and check_extent_in_eb, so that we can disable the extent offset filtering for uncompressed extents. This flag can be set by an improved version of the LOGICAL_INO ioctl to get either behavior as desired. There is no functional change in this patch. The new flag is always false. Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Reviewed-by: David Sterba <dsterba@suse.com> [ minor coding style fixes ] Signed-off-by: David Sterba <dsterba@suse.com>
2017-09-23 01:58:45 +08:00
struct extent_inode_elem **eie,
bool ignore_offset)
{
u64 disk_byte;
struct btrfs_key key;
struct btrfs_file_extent_item *fi;
int slot;
int nritems;
int extent_type;
int ret;
/*
* from the shared data ref, we only have the leaf but we need
* the key. thus, we must look into all items and see that we
* find one (some) with a reference to our extent item.
*/
nritems = btrfs_header_nritems(eb);
for (slot = 0; slot < nritems; ++slot) {
btrfs_item_key_to_cpu(eb, &key, slot);
if (key.type != BTRFS_EXTENT_DATA_KEY)
continue;
fi = btrfs_item_ptr(eb, slot, struct btrfs_file_extent_item);
extent_type = btrfs_file_extent_type(eb, fi);
if (extent_type == BTRFS_FILE_EXTENT_INLINE)
continue;
/* don't skip BTRFS_FILE_EXTENT_PREALLOC, we can handle that */
disk_byte = btrfs_file_extent_disk_bytenr(eb, fi);
if (disk_byte != wanted_disk_byte)
continue;
btrfs: add a flag to iterate_inodes_from_logical to find all extent refs for uncompressed extents The LOGICAL_INO ioctl provides a backward mapping from extent bytenr and offset (encoded as a single logical address) to a list of extent refs. LOGICAL_INO complements TREE_SEARCH, which provides the forward mapping (extent ref -> extent bytenr and offset, or logical address). These are useful capabilities for programs that manipulate extents and extent references from userspace (e.g. dedup and defrag utilities). When the extents are uncompressed (and not encrypted and not other), check_extent_in_eb performs filtering of the extent refs to remove any extent refs which do not contain the same extent offset as the 'logical' parameter's extent offset. This prevents LOGICAL_INO from returning references to more than a single block. To find the set of extent references to an uncompressed extent from [a, b), userspace has to run a loop like this pseudocode: for (i = a; i < b; ++i) extent_ref_set += LOGICAL_INO(i); At each iteration of the loop (up to 32768 iterations for a 128M extent), data we are interested in is collected in the kernel, then deleted by the filter in check_extent_in_eb. When the extents are compressed (or encrypted or other), the 'logical' parameter must be an extent bytenr (the 'a' parameter in the loop). No filtering by extent offset is done (or possible?) so the result is the complete set of extent refs for the entire extent. This removes the need for the loop, since we get all the extent refs in one call. Add an 'ignore_offset' argument to iterate_inodes_from_logical, [...several levels of function call graph...], and check_extent_in_eb, so that we can disable the extent offset filtering for uncompressed extents. This flag can be set by an improved version of the LOGICAL_INO ioctl to get either behavior as desired. There is no functional change in this patch. The new flag is always false. Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Reviewed-by: David Sterba <dsterba@suse.com> [ minor coding style fixes ] Signed-off-by: David Sterba <dsterba@suse.com>
2017-09-23 01:58:45 +08:00
ret = check_extent_in_eb(&key, eb, fi, extent_item_pos, eie, ignore_offset);
if (ret < 0)
return ret;
}
return 0;
}
struct preftree {
struct rb_root_cached root;
unsigned int count;
};
#define PREFTREE_INIT { .root = RB_ROOT_CACHED, .count = 0 }
struct preftrees {
struct preftree direct; /* BTRFS_SHARED_[DATA|BLOCK]_REF_KEY */
struct preftree indirect; /* BTRFS_[TREE_BLOCK|EXTENT_DATA]_REF_KEY */
struct preftree indirect_missing_keys;
};
/*
* Checks for a shared extent during backref search.
*
* The share_count tracks prelim_refs (direct and indirect) having a
* ref->count >0:
* - incremented when a ref->count transitions to >0
* - decremented when a ref->count transitions to <1
*/
struct share_check {
u64 root_objectid;
u64 inum;
int share_count;
};
static inline int extent_is_shared(struct share_check *sc)
{
return (sc && sc->share_count > 1) ? BACKREF_FOUND_SHARED : 0;
}
static struct kmem_cache *btrfs_prelim_ref_cache;
int __init btrfs_prelim_ref_init(void)
{
btrfs_prelim_ref_cache = kmem_cache_create("btrfs_prelim_ref",
sizeof(struct prelim_ref),
0,
SLAB_MEM_SPREAD,
NULL);
if (!btrfs_prelim_ref_cache)
return -ENOMEM;
return 0;
}
void __cold btrfs_prelim_ref_exit(void)
{
kmem_cache_destroy(btrfs_prelim_ref_cache);
}
static void free_pref(struct prelim_ref *ref)
{
kmem_cache_free(btrfs_prelim_ref_cache, ref);
}
/*
* Return 0 when both refs are for the same block (and can be merged).
* A -1 return indicates ref1 is a 'lower' block than ref2, while 1
* indicates a 'higher' block.
*/
static int prelim_ref_compare(struct prelim_ref *ref1,
struct prelim_ref *ref2)
{
if (ref1->level < ref2->level)
return -1;
if (ref1->level > ref2->level)
return 1;
if (ref1->root_id < ref2->root_id)
return -1;
if (ref1->root_id > ref2->root_id)
return 1;
if (ref1->key_for_search.type < ref2->key_for_search.type)
return -1;
if (ref1->key_for_search.type > ref2->key_for_search.type)
return 1;
if (ref1->key_for_search.objectid < ref2->key_for_search.objectid)
return -1;
if (ref1->key_for_search.objectid > ref2->key_for_search.objectid)
return 1;
if (ref1->key_for_search.offset < ref2->key_for_search.offset)
return -1;
if (ref1->key_for_search.offset > ref2->key_for_search.offset)
return 1;
if (ref1->parent < ref2->parent)
return -1;
if (ref1->parent > ref2->parent)
return 1;
return 0;
}
static void update_share_count(struct share_check *sc, int oldcount,
int newcount)
{
if ((!sc) || (oldcount == 0 && newcount < 1))
return;
if (oldcount > 0 && newcount < 1)
sc->share_count--;
else if (oldcount < 1 && newcount > 0)
sc->share_count++;
}
/*
* Add @newref to the @root rbtree, merging identical refs.
*
* Callers should assume that newref has been freed after calling.
*/
static void prelim_ref_insert(const struct btrfs_fs_info *fs_info,
struct preftree *preftree,
struct prelim_ref *newref,
struct share_check *sc)
{
struct rb_root_cached *root;
struct rb_node **p;
struct rb_node *parent = NULL;
struct prelim_ref *ref;
int result;
bool leftmost = true;
root = &preftree->root;
p = &root->rb_root.rb_node;
while (*p) {
parent = *p;
ref = rb_entry(parent, struct prelim_ref, rbnode);
result = prelim_ref_compare(ref, newref);
if (result < 0) {
p = &(*p)->rb_left;
} else if (result > 0) {
p = &(*p)->rb_right;
leftmost = false;
} else {
/* Identical refs, merge them and free @newref */
struct extent_inode_elem *eie = ref->inode_list;
while (eie && eie->next)
eie = eie->next;
if (!eie)
ref->inode_list = newref->inode_list;
else
eie->next = newref->inode_list;
trace_btrfs_prelim_ref_merge(fs_info, ref, newref,
preftree->count);
/*
* A delayed ref can have newref->count < 0.
* The ref->count is updated to follow any
* BTRFS_[ADD|DROP]_DELAYED_REF actions.
*/
update_share_count(sc, ref->count,
ref->count + newref->count);
ref->count += newref->count;
free_pref(newref);
return;
}
}
update_share_count(sc, 0, newref->count);
preftree->count++;
trace_btrfs_prelim_ref_insert(fs_info, newref, NULL, preftree->count);
rb_link_node(&newref->rbnode, parent, p);
rb_insert_color_cached(&newref->rbnode, root, leftmost);
}
/*
* Release the entire tree. We don't care about internal consistency so
* just free everything and then reset the tree root.
*/
static void prelim_release(struct preftree *preftree)
{
struct prelim_ref *ref, *next_ref;
rbtree_postorder_for_each_entry_safe(ref, next_ref,
&preftree->root.rb_root, rbnode)
free_pref(ref);
preftree->root = RB_ROOT_CACHED;
preftree->count = 0;
}
/*
* the rules for all callers of this function are:
* - obtaining the parent is the goal
* - if you add a key, you must know that it is a correct key
* - if you cannot add the parent or a correct key, then we will look into the
* block later to set a correct key
*
* delayed refs
* ============
* backref type | shared | indirect | shared | indirect
* information | tree | tree | data | data
* --------------------+--------+----------+--------+----------
* parent logical | y | - | - | -
* key to resolve | - | y | y | y
* tree block logical | - | - | - | -
* root for resolving | y | y | y | y
*
* - column 1: we've the parent -> done
* - column 2, 3, 4: we use the key to find the parent
*
* on disk refs (inline or keyed)
* ==============================
* backref type | shared | indirect | shared | indirect
* information | tree | tree | data | data
* --------------------+--------+----------+--------+----------
* parent logical | y | - | y | -
* key to resolve | - | - | - | y
* tree block logical | y | y | y | y
* root for resolving | - | y | y | y
*
* - column 1, 3: we've the parent -> done
* - column 2: we take the first key from the block to find the parent
* (see add_missing_keys)
* - column 4: we use the key to find the parent
*
* additional information that's available but not required to find the parent
* block might help in merging entries to gain some speed.
*/
static int add_prelim_ref(const struct btrfs_fs_info *fs_info,
struct preftree *preftree, u64 root_id,
const struct btrfs_key *key, int level, u64 parent,
u64 wanted_disk_byte, int count,
struct share_check *sc, gfp_t gfp_mask)
{
struct prelim_ref *ref;
Btrfs: fix a crash when running balance and defrag concurrently Running balance and defrag concurrently can end up with a crash: kernel BUG at fs/btrfs/relocation.c:4528! RIP: 0010:[<ffffffffa01ac33b>] [<ffffffffa01ac33b>] btrfs_reloc_cow_block+ 0x1eb/0x230 [btrfs] Call Trace: [<ffffffffa01398c1>] ? update_ref_for_cow+0x241/0x380 [btrfs] [<ffffffffa0180bad>] ? copy_extent_buffer+0xad/0x110 [btrfs] [<ffffffffa0139da1>] __btrfs_cow_block+0x3a1/0x520 [btrfs] [<ffffffffa013a0b6>] btrfs_cow_block+0x116/0x1b0 [btrfs] [<ffffffffa013ddad>] btrfs_search_slot+0x43d/0x970 [btrfs] [<ffffffffa0153c57>] btrfs_lookup_file_extent+0x37/0x40 [btrfs] [<ffffffffa0172a5e>] __btrfs_drop_extents+0x11e/0xae0 [btrfs] [<ffffffffa013b3fd>] ? generic_bin_search.constprop.39+0x8d/0x1a0 [btrfs] [<ffffffff8117d14a>] ? kmem_cache_alloc+0x1da/0x200 [<ffffffffa0138e7a>] ? btrfs_alloc_path+0x1a/0x20 [btrfs] [<ffffffffa0173ef0>] btrfs_drop_extents+0x60/0x90 [btrfs] [<ffffffffa016b24d>] relink_extent_backref+0x2ed/0x780 [btrfs] [<ffffffffa0162fe0>] ? btrfs_submit_bio_hook+0x1e0/0x1e0 [btrfs] [<ffffffffa01b8ed7>] ? iterate_inodes_from_logical+0x87/0xa0 [btrfs] [<ffffffffa016b909>] btrfs_finish_ordered_io+0x229/0xac0 [btrfs] [<ffffffffa016c3b5>] finish_ordered_fn+0x15/0x20 [btrfs] [<ffffffffa018cbe5>] worker_loop+0x125/0x4e0 [btrfs] [<ffffffffa018cac0>] ? btrfs_queue_worker+0x300/0x300 [btrfs] [<ffffffff81075ea0>] kthread+0xc0/0xd0 [<ffffffff81075de0>] ? insert_kthread_work+0x40/0x40 [<ffffffff8164796c>] ret_from_fork+0x7c/0xb0 [<ffffffff81075de0>] ? insert_kthread_work+0x40/0x40 ---------------------------------------------------------------------- It turns out to be that balance operation will bump root's @last_snapshot, which enables snapshot-aware defrag path, and backref walking stuff will find data reloc tree as refs' parent, and hit the BUG_ON() during COW. As data reloc tree's data is just for relocation purpose, and will be deleted right after relocation is done, it's unnecessary to walk those refs belonged to data reloc tree, it'd be better to skip them. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2013-10-30 13:25:24 +08:00
if (root_id == BTRFS_DATA_RELOC_TREE_OBJECTID)
return 0;
ref = kmem_cache_alloc(btrfs_prelim_ref_cache, gfp_mask);
if (!ref)
return -ENOMEM;
ref->root_id = root_id;
if (key)
ref->key_for_search = *key;
else
memset(&ref->key_for_search, 0, sizeof(ref->key_for_search));
ref->inode_list = NULL;
ref->level = level;
ref->count = count;
ref->parent = parent;
ref->wanted_disk_byte = wanted_disk_byte;
prelim_ref_insert(fs_info, preftree, ref, sc);
return extent_is_shared(sc);
}
/* direct refs use root == 0, key == NULL */
static int add_direct_ref(const struct btrfs_fs_info *fs_info,
struct preftrees *preftrees, int level, u64 parent,
u64 wanted_disk_byte, int count,
struct share_check *sc, gfp_t gfp_mask)
{
return add_prelim_ref(fs_info, &preftrees->direct, 0, NULL, level,
parent, wanted_disk_byte, count, sc, gfp_mask);
}
/* indirect refs use parent == 0 */
static int add_indirect_ref(const struct btrfs_fs_info *fs_info,
struct preftrees *preftrees, u64 root_id,
const struct btrfs_key *key, int level,
u64 wanted_disk_byte, int count,
struct share_check *sc, gfp_t gfp_mask)
{
struct preftree *tree = &preftrees->indirect;
if (!key)
tree = &preftrees->indirect_missing_keys;
return add_prelim_ref(fs_info, tree, root_id, key, level, 0,
wanted_disk_byte, count, sc, gfp_mask);
}
btrfs: backref, don't add refs from shared block when resolving normal backref All references from the block of SHARED_DATA_REF belong to that shared block backref. For example: item 11 key (40831553536 EXTENT_ITEM 4194304) itemoff 15460 itemsize 95 extent refs 24 gen 7302 flags DATA extent data backref root 257 objectid 260 offset 65536 count 5 extent data backref root 258 objectid 265 offset 0 count 9 shared data backref parent 394985472 count 10 Block 394985472 might be leaf from root 257, and the item obejctid and (file_pos - file_extent_item::offset) in that leaf just happens to be 260 and 65536 which is equal to the first extent data backref entry. Before this patch, when we resolve backref: root 257 objectid 260 offset 65536 we will add those refs in block 394985472 and wrongly treat those as the refs we want. Fix this by checking if the leaf we are processing is shared data backref, if so, just skip this leaf. Shared data refs added into preftrees.direct have all entry value = 0 (root_id = 0, key = NULL, level = 0) except parent entry. Other refs from indirect tree will have key value and root id != 0, and these values won't be changed when their parent is resolved and added to preftrees.direct. Therefore, we could reuse the preftrees.direct and search ref with all values = 0 except parent is set to avoid getting those resolved refs block. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: ethanwu <ethanwu@synology.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-02-07 17:38:16 +08:00
static int is_shared_data_backref(struct preftrees *preftrees, u64 bytenr)
{
struct rb_node **p = &preftrees->direct.root.rb_root.rb_node;
struct rb_node *parent = NULL;
struct prelim_ref *ref = NULL;
struct prelim_ref target = {0};
int result;
target.parent = bytenr;
while (*p) {
parent = *p;
ref = rb_entry(parent, struct prelim_ref, rbnode);
result = prelim_ref_compare(ref, &target);
if (result < 0)
p = &(*p)->rb_left;
else if (result > 0)
p = &(*p)->rb_right;
else
return 1;
}
return 0;
}
static int add_all_parents(struct btrfs_root *root, struct btrfs_path *path,
btrfs: backref, don't add refs from shared block when resolving normal backref All references from the block of SHARED_DATA_REF belong to that shared block backref. For example: item 11 key (40831553536 EXTENT_ITEM 4194304) itemoff 15460 itemsize 95 extent refs 24 gen 7302 flags DATA extent data backref root 257 objectid 260 offset 65536 count 5 extent data backref root 258 objectid 265 offset 0 count 9 shared data backref parent 394985472 count 10 Block 394985472 might be leaf from root 257, and the item obejctid and (file_pos - file_extent_item::offset) in that leaf just happens to be 260 and 65536 which is equal to the first extent data backref entry. Before this patch, when we resolve backref: root 257 objectid 260 offset 65536 we will add those refs in block 394985472 and wrongly treat those as the refs we want. Fix this by checking if the leaf we are processing is shared data backref, if so, just skip this leaf. Shared data refs added into preftrees.direct have all entry value = 0 (root_id = 0, key = NULL, level = 0) except parent entry. Other refs from indirect tree will have key value and root id != 0, and these values won't be changed when their parent is resolved and added to preftrees.direct. Therefore, we could reuse the preftrees.direct and search ref with all values = 0 except parent is set to avoid getting those resolved refs block. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: ethanwu <ethanwu@synology.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-02-07 17:38:16 +08:00
struct ulist *parents,
struct preftrees *preftrees, struct prelim_ref *ref,
int level, u64 time_seq, const u64 *extent_item_pos,
btrfs: backref, use correct count to resolve normal data refs With the following patches: - btrfs: backref, only collect file extent items matching backref offset - btrfs: backref, not adding refs from shared block when resolving normal backref - btrfs: backref, only search backref entries from leaves of the same root we only collect the normal data refs we want, so the imprecise upper bound total_refs of that EXTENT_ITEM could now be changed to the count of the normal backref entry we want to search. Background and how the patches fit together: Btrfs has two types of data backref. For BTRFS_EXTENT_DATA_REF_KEY type of backref, we don't have the exact block number. Therefore, we need to call resolve_indirect_refs. It uses btrfs_search_slot to locate the leaf block. Then we need to walk through the leaves to search for the EXTENT_DATA items that have disk bytenr matching the extent item (add_all_parents). When resolving indirect refs, we could take entries that don't belong to the backref entry we are searching for right now. For that reason when searching backref entry, we always use total refs of that EXTENT_ITEM rather than individual count. For example: item 11 key (40831553536 EXTENT_ITEM 4194304) itemoff 15460 itemsize extent refs 24 gen 7302 flags DATA shared data backref parent 394985472 count 10 #1 extent data backref root 257 objectid 260 offset 1048576 count 3 #2 extent data backref root 256 objectid 260 offset 65536 count 6 #3 extent data backref root 257 objectid 260 offset 65536 count 5 #4 For example, when searching backref entry #4, we'll use total_refs 24, a very loose loop ending condition, instead of total_refs = 5. But using total_refs = 24 is not accurate. Sometimes, we'll never find all the refs from specific root. As a result, the loop keeps on going until we reach the end of that inode. The first 3 patches, handle 3 different types refs we might encounter. These refs do not belong to the normal backref we are searching, and hence need to be skipped. This patch changes the total_refs to correct number so that we could end loop as soon as we find all the refs we want. btrfs send uses backref to find possible clone sources, the following is a simple test to compare the results with and without this patch: $ btrfs subvolume create /sub1 $ for i in `seq 1 163840`; do dd if=/dev/zero of=/sub1/file bs=64K count=1 seek=$((i-1)) conv=notrunc oflag=direct done $ btrfs subvolume snapshot /sub1 /sub2 $ for i in `seq 1 163840`; do dd if=/dev/zero of=/sub1/file bs=4K count=1 seek=$(((i-1)*16+10)) conv=notrunc oflag=direct done $ btrfs subvolume snapshot -r /sub1 /snap1 $ time btrfs send /snap1 | btrfs receive /volume2 Without this patch: real 69m48.124s user 0m50.199s sys 70m15.600s With this patch: real 1m59.683s user 0m35.421s sys 2m42.684s Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: ethanwu <ethanwu@synology.com> [ add patchset cover letter with background and numbers ] Signed-off-by: David Sterba <dsterba@suse.com>
2020-02-07 17:38:18 +08:00
bool ignore_offset)
{
int ret = 0;
int slot;
struct extent_buffer *eb;
struct btrfs_key key;
struct btrfs_key *key_for_search = &ref->key_for_search;
struct btrfs_file_extent_item *fi;
struct extent_inode_elem *eie = NULL, *old = NULL;
u64 disk_byte;
u64 wanted_disk_byte = ref->wanted_disk_byte;
u64 count = 0;
u64 data_offset;
if (level != 0) {
eb = path->nodes[level];
ret = ulist_add(parents, eb->start, 0, GFP_NOFS);
if (ret < 0)
return ret;
return 0;
}
/*
btrfs: backref, don't add refs from shared block when resolving normal backref All references from the block of SHARED_DATA_REF belong to that shared block backref. For example: item 11 key (40831553536 EXTENT_ITEM 4194304) itemoff 15460 itemsize 95 extent refs 24 gen 7302 flags DATA extent data backref root 257 objectid 260 offset 65536 count 5 extent data backref root 258 objectid 265 offset 0 count 9 shared data backref parent 394985472 count 10 Block 394985472 might be leaf from root 257, and the item obejctid and (file_pos - file_extent_item::offset) in that leaf just happens to be 260 and 65536 which is equal to the first extent data backref entry. Before this patch, when we resolve backref: root 257 objectid 260 offset 65536 we will add those refs in block 394985472 and wrongly treat those as the refs we want. Fix this by checking if the leaf we are processing is shared data backref, if so, just skip this leaf. Shared data refs added into preftrees.direct have all entry value = 0 (root_id = 0, key = NULL, level = 0) except parent entry. Other refs from indirect tree will have key value and root id != 0, and these values won't be changed when their parent is resolved and added to preftrees.direct. Therefore, we could reuse the preftrees.direct and search ref with all values = 0 except parent is set to avoid getting those resolved refs block. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: ethanwu <ethanwu@synology.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-02-07 17:38:16 +08:00
* 1. We normally enter this function with the path already pointing to
* the first item to check. But sometimes, we may enter it with
* slot == nritems.
* 2. We are searching for normal backref but bytenr of this leaf
* matches shared data backref
* 3. The leaf owner is not equal to the root we are searching
*
btrfs: backref, don't add refs from shared block when resolving normal backref All references from the block of SHARED_DATA_REF belong to that shared block backref. For example: item 11 key (40831553536 EXTENT_ITEM 4194304) itemoff 15460 itemsize 95 extent refs 24 gen 7302 flags DATA extent data backref root 257 objectid 260 offset 65536 count 5 extent data backref root 258 objectid 265 offset 0 count 9 shared data backref parent 394985472 count 10 Block 394985472 might be leaf from root 257, and the item obejctid and (file_pos - file_extent_item::offset) in that leaf just happens to be 260 and 65536 which is equal to the first extent data backref entry. Before this patch, when we resolve backref: root 257 objectid 260 offset 65536 we will add those refs in block 394985472 and wrongly treat those as the refs we want. Fix this by checking if the leaf we are processing is shared data backref, if so, just skip this leaf. Shared data refs added into preftrees.direct have all entry value = 0 (root_id = 0, key = NULL, level = 0) except parent entry. Other refs from indirect tree will have key value and root id != 0, and these values won't be changed when their parent is resolved and added to preftrees.direct. Therefore, we could reuse the preftrees.direct and search ref with all values = 0 except parent is set to avoid getting those resolved refs block. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: ethanwu <ethanwu@synology.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-02-07 17:38:16 +08:00
* For these cases, go to the next leaf before we continue.
*/
btrfs: backref, don't add refs from shared block when resolving normal backref All references from the block of SHARED_DATA_REF belong to that shared block backref. For example: item 11 key (40831553536 EXTENT_ITEM 4194304) itemoff 15460 itemsize 95 extent refs 24 gen 7302 flags DATA extent data backref root 257 objectid 260 offset 65536 count 5 extent data backref root 258 objectid 265 offset 0 count 9 shared data backref parent 394985472 count 10 Block 394985472 might be leaf from root 257, and the item obejctid and (file_pos - file_extent_item::offset) in that leaf just happens to be 260 and 65536 which is equal to the first extent data backref entry. Before this patch, when we resolve backref: root 257 objectid 260 offset 65536 we will add those refs in block 394985472 and wrongly treat those as the refs we want. Fix this by checking if the leaf we are processing is shared data backref, if so, just skip this leaf. Shared data refs added into preftrees.direct have all entry value = 0 (root_id = 0, key = NULL, level = 0) except parent entry. Other refs from indirect tree will have key value and root id != 0, and these values won't be changed when their parent is resolved and added to preftrees.direct. Therefore, we could reuse the preftrees.direct and search ref with all values = 0 except parent is set to avoid getting those resolved refs block. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: ethanwu <ethanwu@synology.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-02-07 17:38:16 +08:00
eb = path->nodes[0];
if (path->slots[0] >= btrfs_header_nritems(eb) ||
is_shared_data_backref(preftrees, eb->start) ||
ref->root_id != btrfs_header_owner(eb)) {
if (time_seq == SEQ_LAST)
ret = btrfs_next_leaf(root, path);
else
ret = btrfs_next_old_leaf(root, path, time_seq);
}
btrfs: backref, use correct count to resolve normal data refs With the following patches: - btrfs: backref, only collect file extent items matching backref offset - btrfs: backref, not adding refs from shared block when resolving normal backref - btrfs: backref, only search backref entries from leaves of the same root we only collect the normal data refs we want, so the imprecise upper bound total_refs of that EXTENT_ITEM could now be changed to the count of the normal backref entry we want to search. Background and how the patches fit together: Btrfs has two types of data backref. For BTRFS_EXTENT_DATA_REF_KEY type of backref, we don't have the exact block number. Therefore, we need to call resolve_indirect_refs. It uses btrfs_search_slot to locate the leaf block. Then we need to walk through the leaves to search for the EXTENT_DATA items that have disk bytenr matching the extent item (add_all_parents). When resolving indirect refs, we could take entries that don't belong to the backref entry we are searching for right now. For that reason when searching backref entry, we always use total refs of that EXTENT_ITEM rather than individual count. For example: item 11 key (40831553536 EXTENT_ITEM 4194304) itemoff 15460 itemsize extent refs 24 gen 7302 flags DATA shared data backref parent 394985472 count 10 #1 extent data backref root 257 objectid 260 offset 1048576 count 3 #2 extent data backref root 256 objectid 260 offset 65536 count 6 #3 extent data backref root 257 objectid 260 offset 65536 count 5 #4 For example, when searching backref entry #4, we'll use total_refs 24, a very loose loop ending condition, instead of total_refs = 5. But using total_refs = 24 is not accurate. Sometimes, we'll never find all the refs from specific root. As a result, the loop keeps on going until we reach the end of that inode. The first 3 patches, handle 3 different types refs we might encounter. These refs do not belong to the normal backref we are searching, and hence need to be skipped. This patch changes the total_refs to correct number so that we could end loop as soon as we find all the refs we want. btrfs send uses backref to find possible clone sources, the following is a simple test to compare the results with and without this patch: $ btrfs subvolume create /sub1 $ for i in `seq 1 163840`; do dd if=/dev/zero of=/sub1/file bs=64K count=1 seek=$((i-1)) conv=notrunc oflag=direct done $ btrfs subvolume snapshot /sub1 /sub2 $ for i in `seq 1 163840`; do dd if=/dev/zero of=/sub1/file bs=4K count=1 seek=$(((i-1)*16+10)) conv=notrunc oflag=direct done $ btrfs subvolume snapshot -r /sub1 /snap1 $ time btrfs send /snap1 | btrfs receive /volume2 Without this patch: real 69m48.124s user 0m50.199s sys 70m15.600s With this patch: real 1m59.683s user 0m35.421s sys 2m42.684s Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: ethanwu <ethanwu@synology.com> [ add patchset cover letter with background and numbers ] Signed-off-by: David Sterba <dsterba@suse.com>
2020-02-07 17:38:18 +08:00
while (!ret && count < ref->count) {
eb = path->nodes[0];
slot = path->slots[0];
btrfs_item_key_to_cpu(eb, &key, slot);
if (key.objectid != key_for_search->objectid ||
key.type != BTRFS_EXTENT_DATA_KEY)
break;
btrfs: backref, don't add refs from shared block when resolving normal backref All references from the block of SHARED_DATA_REF belong to that shared block backref. For example: item 11 key (40831553536 EXTENT_ITEM 4194304) itemoff 15460 itemsize 95 extent refs 24 gen 7302 flags DATA extent data backref root 257 objectid 260 offset 65536 count 5 extent data backref root 258 objectid 265 offset 0 count 9 shared data backref parent 394985472 count 10 Block 394985472 might be leaf from root 257, and the item obejctid and (file_pos - file_extent_item::offset) in that leaf just happens to be 260 and 65536 which is equal to the first extent data backref entry. Before this patch, when we resolve backref: root 257 objectid 260 offset 65536 we will add those refs in block 394985472 and wrongly treat those as the refs we want. Fix this by checking if the leaf we are processing is shared data backref, if so, just skip this leaf. Shared data refs added into preftrees.direct have all entry value = 0 (root_id = 0, key = NULL, level = 0) except parent entry. Other refs from indirect tree will have key value and root id != 0, and these values won't be changed when their parent is resolved and added to preftrees.direct. Therefore, we could reuse the preftrees.direct and search ref with all values = 0 except parent is set to avoid getting those resolved refs block. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: ethanwu <ethanwu@synology.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-02-07 17:38:16 +08:00
/*
* We are searching for normal backref but bytenr of this leaf
* matches shared data backref, OR
* the leaf owner is not equal to the root we are searching for
btrfs: backref, don't add refs from shared block when resolving normal backref All references from the block of SHARED_DATA_REF belong to that shared block backref. For example: item 11 key (40831553536 EXTENT_ITEM 4194304) itemoff 15460 itemsize 95 extent refs 24 gen 7302 flags DATA extent data backref root 257 objectid 260 offset 65536 count 5 extent data backref root 258 objectid 265 offset 0 count 9 shared data backref parent 394985472 count 10 Block 394985472 might be leaf from root 257, and the item obejctid and (file_pos - file_extent_item::offset) in that leaf just happens to be 260 and 65536 which is equal to the first extent data backref entry. Before this patch, when we resolve backref: root 257 objectid 260 offset 65536 we will add those refs in block 394985472 and wrongly treat those as the refs we want. Fix this by checking if the leaf we are processing is shared data backref, if so, just skip this leaf. Shared data refs added into preftrees.direct have all entry value = 0 (root_id = 0, key = NULL, level = 0) except parent entry. Other refs from indirect tree will have key value and root id != 0, and these values won't be changed when their parent is resolved and added to preftrees.direct. Therefore, we could reuse the preftrees.direct and search ref with all values = 0 except parent is set to avoid getting those resolved refs block. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: ethanwu <ethanwu@synology.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-02-07 17:38:16 +08:00
*/
if (slot == 0 &&
(is_shared_data_backref(preftrees, eb->start) ||
ref->root_id != btrfs_header_owner(eb))) {
btrfs: backref, don't add refs from shared block when resolving normal backref All references from the block of SHARED_DATA_REF belong to that shared block backref. For example: item 11 key (40831553536 EXTENT_ITEM 4194304) itemoff 15460 itemsize 95 extent refs 24 gen 7302 flags DATA extent data backref root 257 objectid 260 offset 65536 count 5 extent data backref root 258 objectid 265 offset 0 count 9 shared data backref parent 394985472 count 10 Block 394985472 might be leaf from root 257, and the item obejctid and (file_pos - file_extent_item::offset) in that leaf just happens to be 260 and 65536 which is equal to the first extent data backref entry. Before this patch, when we resolve backref: root 257 objectid 260 offset 65536 we will add those refs in block 394985472 and wrongly treat those as the refs we want. Fix this by checking if the leaf we are processing is shared data backref, if so, just skip this leaf. Shared data refs added into preftrees.direct have all entry value = 0 (root_id = 0, key = NULL, level = 0) except parent entry. Other refs from indirect tree will have key value and root id != 0, and these values won't be changed when their parent is resolved and added to preftrees.direct. Therefore, we could reuse the preftrees.direct and search ref with all values = 0 except parent is set to avoid getting those resolved refs block. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: ethanwu <ethanwu@synology.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-02-07 17:38:16 +08:00
if (time_seq == SEQ_LAST)
ret = btrfs_next_leaf(root, path);
else
ret = btrfs_next_old_leaf(root, path, time_seq);
continue;
}
fi = btrfs_item_ptr(eb, slot, struct btrfs_file_extent_item);
disk_byte = btrfs_file_extent_disk_bytenr(eb, fi);
data_offset = btrfs_file_extent_offset(eb, fi);
if (disk_byte == wanted_disk_byte) {
eie = NULL;
old = NULL;
if (ref->key_for_search.offset == key.offset - data_offset)
count++;
else
goto next;
if (extent_item_pos) {
ret = check_extent_in_eb(&key, eb, fi,
*extent_item_pos,
btrfs: add a flag to iterate_inodes_from_logical to find all extent refs for uncompressed extents The LOGICAL_INO ioctl provides a backward mapping from extent bytenr and offset (encoded as a single logical address) to a list of extent refs. LOGICAL_INO complements TREE_SEARCH, which provides the forward mapping (extent ref -> extent bytenr and offset, or logical address). These are useful capabilities for programs that manipulate extents and extent references from userspace (e.g. dedup and defrag utilities). When the extents are uncompressed (and not encrypted and not other), check_extent_in_eb performs filtering of the extent refs to remove any extent refs which do not contain the same extent offset as the 'logical' parameter's extent offset. This prevents LOGICAL_INO from returning references to more than a single block. To find the set of extent references to an uncompressed extent from [a, b), userspace has to run a loop like this pseudocode: for (i = a; i < b; ++i) extent_ref_set += LOGICAL_INO(i); At each iteration of the loop (up to 32768 iterations for a 128M extent), data we are interested in is collected in the kernel, then deleted by the filter in check_extent_in_eb. When the extents are compressed (or encrypted or other), the 'logical' parameter must be an extent bytenr (the 'a' parameter in the loop). No filtering by extent offset is done (or possible?) so the result is the complete set of extent refs for the entire extent. This removes the need for the loop, since we get all the extent refs in one call. Add an 'ignore_offset' argument to iterate_inodes_from_logical, [...several levels of function call graph...], and check_extent_in_eb, so that we can disable the extent offset filtering for uncompressed extents. This flag can be set by an improved version of the LOGICAL_INO ioctl to get either behavior as desired. There is no functional change in this patch. The new flag is always false. Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Reviewed-by: David Sterba <dsterba@suse.com> [ minor coding style fixes ] Signed-off-by: David Sterba <dsterba@suse.com>
2017-09-23 01:58:45 +08:00
&eie, ignore_offset);
if (ret < 0)
break;
}
if (ret > 0)
goto next;
Btrfs: Fix memory corruption by ulist_add_merge() on 32bit arch We've got bug reports that btrfs crashes when quota is enabled on 32bit kernel, typically with the Oops like below: BUG: unable to handle kernel NULL pointer dereference at 00000004 IP: [<f9234590>] find_parent_nodes+0x360/0x1380 [btrfs] *pde = 00000000 Oops: 0000 [#1] SMP CPU: 0 PID: 151 Comm: kworker/u8:2 Tainted: G S W 3.15.2-1.gd43d97e-default #1 Workqueue: btrfs-qgroup-rescan normal_work_helper [btrfs] task: f1478130 ti: f147c000 task.ti: f147c000 EIP: 0060:[<f9234590>] EFLAGS: 00010213 CPU: 0 EIP is at find_parent_nodes+0x360/0x1380 [btrfs] EAX: f147dda8 EBX: f147ddb0 ECX: 00000011 EDX: 00000000 ESI: 00000000 EDI: f147dda4 EBP: f147ddf8 ESP: f147dd38 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 CR0: 8005003b CR2: 00000004 CR3: 00bf3000 CR4: 00000690 Stack: 00000000 00000000 f147dda4 00000050 00000001 00000000 00000001 00000050 00000001 00000000 d3059000 00000001 00000022 000000a8 00000000 00000000 00000000 000000a1 00000000 00000000 00000001 00000000 00000000 11800000 Call Trace: [<f923564d>] __btrfs_find_all_roots+0x9d/0xf0 [btrfs] [<f9237bb1>] btrfs_qgroup_rescan_worker+0x401/0x760 [btrfs] [<f9206148>] normal_work_helper+0xc8/0x270 [btrfs] [<c025e38b>] process_one_work+0x11b/0x390 [<c025eea1>] worker_thread+0x101/0x340 [<c026432b>] kthread+0x9b/0xb0 [<c0712a71>] ret_from_kernel_thread+0x21/0x30 [<c0264290>] kthread_create_on_node+0x110/0x110 This indicates a NULL corruption in prefs_delayed list. The further investigation and bisection pointed that the call of ulist_add_merge() results in the corruption. ulist_add_merge() takes u64 as aux and writes a 64bit value into old_aux. The callers of this function in backref.c, however, pass a pointer of a pointer to old_aux. That is, the function overwrites 64bit value on 32bit pointer. This caused a NULL in the adjacent variable, in this case, prefs_delayed. Here is a quick attempt to band-aid over this: a new function, ulist_add_merge_ptr() is introduced to pass/store properly a pointer value instead of u64. There are still ugly void ** cast remaining in the callers because void ** cannot be taken implicitly. But, it's safer than explicit cast to u64, anyway. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=887046 Cc: <stable@vger.kernel.org> [v3.11+] Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Chris Mason <clm@fb.com>
2014-07-28 16:57:04 +08:00
ret = ulist_add_merge_ptr(parents, eb->start,
eie, (void **)&old, GFP_NOFS);
if (ret < 0)
break;
if (!ret && extent_item_pos) {
while (old->next)
old = old->next;
old->next = eie;
}
eie = NULL;
}
next:
if (time_seq == SEQ_LAST)
ret = btrfs_next_item(root, path);
else
ret = btrfs_next_old_item(root, path, time_seq);
}
if (ret > 0)
ret = 0;
else if (ret < 0)
free_inode_elem_list(eie);
return ret;
}
/*
* resolve an indirect backref in the form (root_id, key, level)
* to a logical address
*/
static int resolve_indirect_ref(struct btrfs_fs_info *fs_info,
struct btrfs_path *path, u64 time_seq,
btrfs: backref, don't add refs from shared block when resolving normal backref All references from the block of SHARED_DATA_REF belong to that shared block backref. For example: item 11 key (40831553536 EXTENT_ITEM 4194304) itemoff 15460 itemsize 95 extent refs 24 gen 7302 flags DATA extent data backref root 257 objectid 260 offset 65536 count 5 extent data backref root 258 objectid 265 offset 0 count 9 shared data backref parent 394985472 count 10 Block 394985472 might be leaf from root 257, and the item obejctid and (file_pos - file_extent_item::offset) in that leaf just happens to be 260 and 65536 which is equal to the first extent data backref entry. Before this patch, when we resolve backref: root 257 objectid 260 offset 65536 we will add those refs in block 394985472 and wrongly treat those as the refs we want. Fix this by checking if the leaf we are processing is shared data backref, if so, just skip this leaf. Shared data refs added into preftrees.direct have all entry value = 0 (root_id = 0, key = NULL, level = 0) except parent entry. Other refs from indirect tree will have key value and root id != 0, and these values won't be changed when their parent is resolved and added to preftrees.direct. Therefore, we could reuse the preftrees.direct and search ref with all values = 0 except parent is set to avoid getting those resolved refs block. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: ethanwu <ethanwu@synology.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-02-07 17:38:16 +08:00
struct preftrees *preftrees,
struct prelim_ref *ref, struct ulist *parents,
btrfs: backref, use correct count to resolve normal data refs With the following patches: - btrfs: backref, only collect file extent items matching backref offset - btrfs: backref, not adding refs from shared block when resolving normal backref - btrfs: backref, only search backref entries from leaves of the same root we only collect the normal data refs we want, so the imprecise upper bound total_refs of that EXTENT_ITEM could now be changed to the count of the normal backref entry we want to search. Background and how the patches fit together: Btrfs has two types of data backref. For BTRFS_EXTENT_DATA_REF_KEY type of backref, we don't have the exact block number. Therefore, we need to call resolve_indirect_refs. It uses btrfs_search_slot to locate the leaf block. Then we need to walk through the leaves to search for the EXTENT_DATA items that have disk bytenr matching the extent item (add_all_parents). When resolving indirect refs, we could take entries that don't belong to the backref entry we are searching for right now. For that reason when searching backref entry, we always use total refs of that EXTENT_ITEM rather than individual count. For example: item 11 key (40831553536 EXTENT_ITEM 4194304) itemoff 15460 itemsize extent refs 24 gen 7302 flags DATA shared data backref parent 394985472 count 10 #1 extent data backref root 257 objectid 260 offset 1048576 count 3 #2 extent data backref root 256 objectid 260 offset 65536 count 6 #3 extent data backref root 257 objectid 260 offset 65536 count 5 #4 For example, when searching backref entry #4, we'll use total_refs 24, a very loose loop ending condition, instead of total_refs = 5. But using total_refs = 24 is not accurate. Sometimes, we'll never find all the refs from specific root. As a result, the loop keeps on going until we reach the end of that inode. The first 3 patches, handle 3 different types refs we might encounter. These refs do not belong to the normal backref we are searching, and hence need to be skipped. This patch changes the total_refs to correct number so that we could end loop as soon as we find all the refs we want. btrfs send uses backref to find possible clone sources, the following is a simple test to compare the results with and without this patch: $ btrfs subvolume create /sub1 $ for i in `seq 1 163840`; do dd if=/dev/zero of=/sub1/file bs=64K count=1 seek=$((i-1)) conv=notrunc oflag=direct done $ btrfs subvolume snapshot /sub1 /sub2 $ for i in `seq 1 163840`; do dd if=/dev/zero of=/sub1/file bs=4K count=1 seek=$(((i-1)*16+10)) conv=notrunc oflag=direct done $ btrfs subvolume snapshot -r /sub1 /snap1 $ time btrfs send /snap1 | btrfs receive /volume2 Without this patch: real 69m48.124s user 0m50.199s sys 70m15.600s With this patch: real 1m59.683s user 0m35.421s sys 2m42.684s Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: ethanwu <ethanwu@synology.com> [ add patchset cover letter with background and numbers ] Signed-off-by: David Sterba <dsterba@suse.com>
2020-02-07 17:38:18 +08:00
const u64 *extent_item_pos, bool ignore_offset)
{
struct btrfs_root *root;
struct btrfs_key root_key;
struct extent_buffer *eb;
int ret = 0;
int root_level;
int level = ref->level;
struct btrfs_key search_key = ref->key_for_search;
root_key.objectid = ref->root_id;
root_key.type = BTRFS_ROOT_ITEM_KEY;
root_key.offset = (u64)-1;
root = btrfs_get_fs_root(fs_info, &root_key, false);
if (IS_ERR(root)) {
ret = PTR_ERR(root);
goto out_free;
}
if (btrfs_is_testing(fs_info)) {
ret = -ENOENT;
goto out;
}
if (path->search_commit_root)
root_level = btrfs_header_level(root->commit_root);
else if (time_seq == SEQ_LAST)
root_level = btrfs_header_level(root->node);
else
root_level = btrfs_old_root_level(root, time_seq);
if (root_level + 1 == level)
goto out;
/*
* We can often find data backrefs with an offset that is too large
* (>= LLONG_MAX, maximum allowed file offset) due to underflows when
* subtracting a file's offset with the data offset of its
* corresponding extent data item. This can happen for example in the
* clone ioctl.
*
* So if we detect such case we set the search key's offset to zero to
* make sure we will find the matching file extent item at
* add_all_parents(), otherwise we will miss it because the offset
* taken form the backref is much larger then the offset of the file
* extent item. This can make us scan a very large number of file
* extent items, but at least it will not make us miss any.
*
* This is an ugly workaround for a behaviour that should have never
* existed, but it does and a fix for the clone ioctl would touch a lot
* of places, cause backwards incompatibility and would not fix the
* problem for extents cloned with older kernels.
*/
if (search_key.type == BTRFS_EXTENT_DATA_KEY &&
search_key.offset >= LLONG_MAX)
search_key.offset = 0;
path->lowest_level = level;
if (time_seq == SEQ_LAST)
ret = btrfs_search_slot(NULL, root, &search_key, path, 0, 0);
else
ret = btrfs_search_old_slot(root, &search_key, path, time_seq);
btrfs_debug(fs_info,
"search slot in root %llu (level %d, ref count %d) returned %d for key (%llu %u %llu)",
ref->root_id, level, ref->count, ret,
ref->key_for_search.objectid, ref->key_for_search.type,
ref->key_for_search.offset);
if (ret < 0)
goto out;
eb = path->nodes[level];
while (!eb) {
if (WARN_ON(!level)) {
ret = 1;
goto out;
}
level--;
eb = path->nodes[level];
}
btrfs: backref, don't add refs from shared block when resolving normal backref All references from the block of SHARED_DATA_REF belong to that shared block backref. For example: item 11 key (40831553536 EXTENT_ITEM 4194304) itemoff 15460 itemsize 95 extent refs 24 gen 7302 flags DATA extent data backref root 257 objectid 260 offset 65536 count 5 extent data backref root 258 objectid 265 offset 0 count 9 shared data backref parent 394985472 count 10 Block 394985472 might be leaf from root 257, and the item obejctid and (file_pos - file_extent_item::offset) in that leaf just happens to be 260 and 65536 which is equal to the first extent data backref entry. Before this patch, when we resolve backref: root 257 objectid 260 offset 65536 we will add those refs in block 394985472 and wrongly treat those as the refs we want. Fix this by checking if the leaf we are processing is shared data backref, if so, just skip this leaf. Shared data refs added into preftrees.direct have all entry value = 0 (root_id = 0, key = NULL, level = 0) except parent entry. Other refs from indirect tree will have key value and root id != 0, and these values won't be changed when their parent is resolved and added to preftrees.direct. Therefore, we could reuse the preftrees.direct and search ref with all values = 0 except parent is set to avoid getting those resolved refs block. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: ethanwu <ethanwu@synology.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-02-07 17:38:16 +08:00
ret = add_all_parents(root, path, parents, preftrees, ref, level,
btrfs: backref, use correct count to resolve normal data refs With the following patches: - btrfs: backref, only collect file extent items matching backref offset - btrfs: backref, not adding refs from shared block when resolving normal backref - btrfs: backref, only search backref entries from leaves of the same root we only collect the normal data refs we want, so the imprecise upper bound total_refs of that EXTENT_ITEM could now be changed to the count of the normal backref entry we want to search. Background and how the patches fit together: Btrfs has two types of data backref. For BTRFS_EXTENT_DATA_REF_KEY type of backref, we don't have the exact block number. Therefore, we need to call resolve_indirect_refs. It uses btrfs_search_slot to locate the leaf block. Then we need to walk through the leaves to search for the EXTENT_DATA items that have disk bytenr matching the extent item (add_all_parents). When resolving indirect refs, we could take entries that don't belong to the backref entry we are searching for right now. For that reason when searching backref entry, we always use total refs of that EXTENT_ITEM rather than individual count. For example: item 11 key (40831553536 EXTENT_ITEM 4194304) itemoff 15460 itemsize extent refs 24 gen 7302 flags DATA shared data backref parent 394985472 count 10 #1 extent data backref root 257 objectid 260 offset 1048576 count 3 #2 extent data backref root 256 objectid 260 offset 65536 count 6 #3 extent data backref root 257 objectid 260 offset 65536 count 5 #4 For example, when searching backref entry #4, we'll use total_refs 24, a very loose loop ending condition, instead of total_refs = 5. But using total_refs = 24 is not accurate. Sometimes, we'll never find all the refs from specific root. As a result, the loop keeps on going until we reach the end of that inode. The first 3 patches, handle 3 different types refs we might encounter. These refs do not belong to the normal backref we are searching, and hence need to be skipped. This patch changes the total_refs to correct number so that we could end loop as soon as we find all the refs we want. btrfs send uses backref to find possible clone sources, the following is a simple test to compare the results with and without this patch: $ btrfs subvolume create /sub1 $ for i in `seq 1 163840`; do dd if=/dev/zero of=/sub1/file bs=64K count=1 seek=$((i-1)) conv=notrunc oflag=direct done $ btrfs subvolume snapshot /sub1 /sub2 $ for i in `seq 1 163840`; do dd if=/dev/zero of=/sub1/file bs=4K count=1 seek=$(((i-1)*16+10)) conv=notrunc oflag=direct done $ btrfs subvolume snapshot -r /sub1 /snap1 $ time btrfs send /snap1 | btrfs receive /volume2 Without this patch: real 69m48.124s user 0m50.199s sys 70m15.600s With this patch: real 1m59.683s user 0m35.421s sys 2m42.684s Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: ethanwu <ethanwu@synology.com> [ add patchset cover letter with background and numbers ] Signed-off-by: David Sterba <dsterba@suse.com>
2020-02-07 17:38:18 +08:00
time_seq, extent_item_pos, ignore_offset);
out:
btrfs_put_root(root);
out_free:
path->lowest_level = 0;
btrfs_release_path(path);
return ret;
}
static struct extent_inode_elem *
unode_aux_to_inode_list(struct ulist_node *node)
{
if (!node)
return NULL;
return (struct extent_inode_elem *)(uintptr_t)node->aux;
}
/*
* We maintain three separate rbtrees: one for direct refs, one for
* indirect refs which have a key, and one for indirect refs which do not
* have a key. Each tree does merge on insertion.
*
* Once all of the references are located, we iterate over the tree of
* indirect refs with missing keys. An appropriate key is located and
* the ref is moved onto the tree for indirect refs. After all missing
* keys are thus located, we iterate over the indirect ref tree, resolve
* each reference, and then insert the resolved reference onto the
* direct tree (merging there too).
*
* New backrefs (i.e., for parent nodes) are added to the appropriate
* rbtree as they are encountered. The new backrefs are subsequently
* resolved as above.
*/
static int resolve_indirect_refs(struct btrfs_fs_info *fs_info,
struct btrfs_path *path, u64 time_seq,
struct preftrees *preftrees,
btrfs: backref, use correct count to resolve normal data refs With the following patches: - btrfs: backref, only collect file extent items matching backref offset - btrfs: backref, not adding refs from shared block when resolving normal backref - btrfs: backref, only search backref entries from leaves of the same root we only collect the normal data refs we want, so the imprecise upper bound total_refs of that EXTENT_ITEM could now be changed to the count of the normal backref entry we want to search. Background and how the patches fit together: Btrfs has two types of data backref. For BTRFS_EXTENT_DATA_REF_KEY type of backref, we don't have the exact block number. Therefore, we need to call resolve_indirect_refs. It uses btrfs_search_slot to locate the leaf block. Then we need to walk through the leaves to search for the EXTENT_DATA items that have disk bytenr matching the extent item (add_all_parents). When resolving indirect refs, we could take entries that don't belong to the backref entry we are searching for right now. For that reason when searching backref entry, we always use total refs of that EXTENT_ITEM rather than individual count. For example: item 11 key (40831553536 EXTENT_ITEM 4194304) itemoff 15460 itemsize extent refs 24 gen 7302 flags DATA shared data backref parent 394985472 count 10 #1 extent data backref root 257 objectid 260 offset 1048576 count 3 #2 extent data backref root 256 objectid 260 offset 65536 count 6 #3 extent data backref root 257 objectid 260 offset 65536 count 5 #4 For example, when searching backref entry #4, we'll use total_refs 24, a very loose loop ending condition, instead of total_refs = 5. But using total_refs = 24 is not accurate. Sometimes, we'll never find all the refs from specific root. As a result, the loop keeps on going until we reach the end of that inode. The first 3 patches, handle 3 different types refs we might encounter. These refs do not belong to the normal backref we are searching, and hence need to be skipped. This patch changes the total_refs to correct number so that we could end loop as soon as we find all the refs we want. btrfs send uses backref to find possible clone sources, the following is a simple test to compare the results with and without this patch: $ btrfs subvolume create /sub1 $ for i in `seq 1 163840`; do dd if=/dev/zero of=/sub1/file bs=64K count=1 seek=$((i-1)) conv=notrunc oflag=direct done $ btrfs subvolume snapshot /sub1 /sub2 $ for i in `seq 1 163840`; do dd if=/dev/zero of=/sub1/file bs=4K count=1 seek=$(((i-1)*16+10)) conv=notrunc oflag=direct done $ btrfs subvolume snapshot -r /sub1 /snap1 $ time btrfs send /snap1 | btrfs receive /volume2 Without this patch: real 69m48.124s user 0m50.199s sys 70m15.600s With this patch: real 1m59.683s user 0m35.421s sys 2m42.684s Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: ethanwu <ethanwu@synology.com> [ add patchset cover letter with background and numbers ] Signed-off-by: David Sterba <dsterba@suse.com>
2020-02-07 17:38:18 +08:00
const u64 *extent_item_pos,
btrfs: add a flag to iterate_inodes_from_logical to find all extent refs for uncompressed extents The LOGICAL_INO ioctl provides a backward mapping from extent bytenr and offset (encoded as a single logical address) to a list of extent refs. LOGICAL_INO complements TREE_SEARCH, which provides the forward mapping (extent ref -> extent bytenr and offset, or logical address). These are useful capabilities for programs that manipulate extents and extent references from userspace (e.g. dedup and defrag utilities). When the extents are uncompressed (and not encrypted and not other), check_extent_in_eb performs filtering of the extent refs to remove any extent refs which do not contain the same extent offset as the 'logical' parameter's extent offset. This prevents LOGICAL_INO from returning references to more than a single block. To find the set of extent references to an uncompressed extent from [a, b), userspace has to run a loop like this pseudocode: for (i = a; i < b; ++i) extent_ref_set += LOGICAL_INO(i); At each iteration of the loop (up to 32768 iterations for a 128M extent), data we are interested in is collected in the kernel, then deleted by the filter in check_extent_in_eb. When the extents are compressed (or encrypted or other), the 'logical' parameter must be an extent bytenr (the 'a' parameter in the loop). No filtering by extent offset is done (or possible?) so the result is the complete set of extent refs for the entire extent. This removes the need for the loop, since we get all the extent refs in one call. Add an 'ignore_offset' argument to iterate_inodes_from_logical, [...several levels of function call graph...], and check_extent_in_eb, so that we can disable the extent offset filtering for uncompressed extents. This flag can be set by an improved version of the LOGICAL_INO ioctl to get either behavior as desired. There is no functional change in this patch. The new flag is always false. Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Reviewed-by: David Sterba <dsterba@suse.com> [ minor coding style fixes ] Signed-off-by: David Sterba <dsterba@suse.com>
2017-09-23 01:58:45 +08:00
struct share_check *sc, bool ignore_offset)
{
int err;
int ret = 0;
struct ulist *parents;
struct ulist_node *node;
struct ulist_iterator uiter;
struct rb_node *rnode;
parents = ulist_alloc(GFP_NOFS);
if (!parents)
return -ENOMEM;
/*
* We could trade memory usage for performance here by iterating
* the tree, allocating new refs for each insertion, and then
* freeing the entire indirect tree when we're done. In some test
* cases, the tree can grow quite large (~200k objects).
*/
while ((rnode = rb_first_cached(&preftrees->indirect.root))) {
struct prelim_ref *ref;
ref = rb_entry(rnode, struct prelim_ref, rbnode);
if (WARN(ref->parent,
"BUG: direct ref found in indirect tree")) {
ret = -EINVAL;
goto out;
}
rb_erase_cached(&ref->rbnode, &preftrees->indirect.root);
preftrees->indirect.count--;
if (ref->count == 0) {
free_pref(ref);
continue;
}
if (sc && sc->root_objectid &&
ref->root_id != sc->root_objectid) {
free_pref(ref);
ret = BACKREF_FOUND_SHARED;
goto out;
}
btrfs: backref, don't add refs from shared block when resolving normal backref All references from the block of SHARED_DATA_REF belong to that shared block backref. For example: item 11 key (40831553536 EXTENT_ITEM 4194304) itemoff 15460 itemsize 95 extent refs 24 gen 7302 flags DATA extent data backref root 257 objectid 260 offset 65536 count 5 extent data backref root 258 objectid 265 offset 0 count 9 shared data backref parent 394985472 count 10 Block 394985472 might be leaf from root 257, and the item obejctid and (file_pos - file_extent_item::offset) in that leaf just happens to be 260 and 65536 which is equal to the first extent data backref entry. Before this patch, when we resolve backref: root 257 objectid 260 offset 65536 we will add those refs in block 394985472 and wrongly treat those as the refs we want. Fix this by checking if the leaf we are processing is shared data backref, if so, just skip this leaf. Shared data refs added into preftrees.direct have all entry value = 0 (root_id = 0, key = NULL, level = 0) except parent entry. Other refs from indirect tree will have key value and root id != 0, and these values won't be changed when their parent is resolved and added to preftrees.direct. Therefore, we could reuse the preftrees.direct and search ref with all values = 0 except parent is set to avoid getting those resolved refs block. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: ethanwu <ethanwu@synology.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-02-07 17:38:16 +08:00
err = resolve_indirect_ref(fs_info, path, time_seq, preftrees,
ref, parents, extent_item_pos,
btrfs: backref, use correct count to resolve normal data refs With the following patches: - btrfs: backref, only collect file extent items matching backref offset - btrfs: backref, not adding refs from shared block when resolving normal backref - btrfs: backref, only search backref entries from leaves of the same root we only collect the normal data refs we want, so the imprecise upper bound total_refs of that EXTENT_ITEM could now be changed to the count of the normal backref entry we want to search. Background and how the patches fit together: Btrfs has two types of data backref. For BTRFS_EXTENT_DATA_REF_KEY type of backref, we don't have the exact block number. Therefore, we need to call resolve_indirect_refs. It uses btrfs_search_slot to locate the leaf block. Then we need to walk through the leaves to search for the EXTENT_DATA items that have disk bytenr matching the extent item (add_all_parents). When resolving indirect refs, we could take entries that don't belong to the backref entry we are searching for right now. For that reason when searching backref entry, we always use total refs of that EXTENT_ITEM rather than individual count. For example: item 11 key (40831553536 EXTENT_ITEM 4194304) itemoff 15460 itemsize extent refs 24 gen 7302 flags DATA shared data backref parent 394985472 count 10 #1 extent data backref root 257 objectid 260 offset 1048576 count 3 #2 extent data backref root 256 objectid 260 offset 65536 count 6 #3 extent data backref root 257 objectid 260 offset 65536 count 5 #4 For example, when searching backref entry #4, we'll use total_refs 24, a very loose loop ending condition, instead of total_refs = 5. But using total_refs = 24 is not accurate. Sometimes, we'll never find all the refs from specific root. As a result, the loop keeps on going until we reach the end of that inode. The first 3 patches, handle 3 different types refs we might encounter. These refs do not belong to the normal backref we are searching, and hence need to be skipped. This patch changes the total_refs to correct number so that we could end loop as soon as we find all the refs we want. btrfs send uses backref to find possible clone sources, the following is a simple test to compare the results with and without this patch: $ btrfs subvolume create /sub1 $ for i in `seq 1 163840`; do dd if=/dev/zero of=/sub1/file bs=64K count=1 seek=$((i-1)) conv=notrunc oflag=direct done $ btrfs subvolume snapshot /sub1 /sub2 $ for i in `seq 1 163840`; do dd if=/dev/zero of=/sub1/file bs=4K count=1 seek=$(((i-1)*16+10)) conv=notrunc oflag=direct done $ btrfs subvolume snapshot -r /sub1 /snap1 $ time btrfs send /snap1 | btrfs receive /volume2 Without this patch: real 69m48.124s user 0m50.199s sys 70m15.600s With this patch: real 1m59.683s user 0m35.421s sys 2m42.684s Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: ethanwu <ethanwu@synology.com> [ add patchset cover letter with background and numbers ] Signed-off-by: David Sterba <dsterba@suse.com>
2020-02-07 17:38:18 +08:00
ignore_offset);
/*
* we can only tolerate ENOENT,otherwise,we should catch error
* and return directly.
*/
if (err == -ENOENT) {
prelim_ref_insert(fs_info, &preftrees->direct, ref,
NULL);
continue;
} else if (err) {
free_pref(ref);
ret = err;
goto out;
}
/* we put the first parent into the ref at hand */
ULIST_ITER_INIT(&uiter);
node = ulist_next(parents, &uiter);
ref->parent = node ? node->val : 0;
ref->inode_list = unode_aux_to_inode_list(node);
/* Add a prelim_ref(s) for any other parent(s). */
while ((node = ulist_next(parents, &uiter))) {
struct prelim_ref *new_ref;
new_ref = kmem_cache_alloc(btrfs_prelim_ref_cache,
GFP_NOFS);
if (!new_ref) {
free_pref(ref);
ret = -ENOMEM;
goto out;
}
memcpy(new_ref, ref, sizeof(*ref));
new_ref->parent = node->val;
new_ref->inode_list = unode_aux_to_inode_list(node);
prelim_ref_insert(fs_info, &preftrees->direct,
new_ref, NULL);
}
/*
* Now it's a direct ref, put it in the direct tree. We must
* do this last because the ref could be merged/freed here.
*/
prelim_ref_insert(fs_info, &preftrees->direct, ref, NULL);
ulist_reinit(parents);
cond_resched();
}
out:
ulist_free(parents);
return ret;
}
/*
* read tree blocks and add keys where required.
*/
static int add_missing_keys(struct btrfs_fs_info *fs_info,
btrfs: honor path->skip_locking in backref code Qgroups will do the old roots lookup at delayed ref time, which could be while walking down the extent root while running a delayed ref. This should be fine, except we specifically lock eb's in the backref walking code irrespective of path->skip_locking, which deadlocks the system. Fix up the backref code to honor path->skip_locking, nobody will be modifying the commit_root when we're searching so it's completely safe to do. This happens since fb235dc06fac ("btrfs: qgroup: Move half of the qgroup accounting time out of commit trans"), kernel may lockup with quota enabled. There is one backref trace triggered by snapshot dropping along with write operation in the source subvolume. The example can be reliably reproduced: btrfs-cleaner D 0 4062 2 0x80000000 Call Trace: schedule+0x32/0x90 btrfs_tree_read_lock+0x93/0x130 [btrfs] find_parent_nodes+0x29b/0x1170 [btrfs] btrfs_find_all_roots_safe+0xa8/0x120 [btrfs] btrfs_find_all_roots+0x57/0x70 [btrfs] btrfs_qgroup_trace_extent_post+0x37/0x70 [btrfs] btrfs_qgroup_trace_leaf_items+0x10b/0x140 [btrfs] btrfs_qgroup_trace_subtree+0xc8/0xe0 [btrfs] do_walk_down+0x541/0x5e3 [btrfs] walk_down_tree+0xab/0xe7 [btrfs] btrfs_drop_snapshot+0x356/0x71a [btrfs] btrfs_clean_one_deleted_snapshot+0xb8/0xf0 [btrfs] cleaner_kthread+0x12b/0x160 [btrfs] kthread+0x112/0x130 ret_from_fork+0x27/0x50 When dropping snapshots with qgroup enabled, we will trigger backref walk. However such backref walk at that timing is pretty dangerous, as if one of the parent nodes get WRITE locked by other thread, we could cause a dead lock. For example: FS 260 FS 261 (Dropped) node A node B / \ / \ node C node D node E / \ / \ / \ leaf F|leaf G|leaf H|leaf I|leaf J|leaf K The lock sequence would be: Thread A (cleaner) | Thread B (other writer) ----------------------------------------------------------------------- write_lock(B) | write_lock(D) | ^^^ called by walk_down_tree() | | write_lock(A) | write_lock(D) << Stall read_lock(H) << for backref walk | read_lock(D) << lock owner is | the same thread A | so read lock is OK | read_lock(A) << Stall | So thread A hold write lock D, and needs read lock A to unlock. While thread B holds write lock A, while needs lock D to unlock. This will cause a deadlock. This is not only limited to snapshot dropping case. As the backref walk, even only happens on commit trees, is breaking the normal top-down locking order, makes it deadlock prone. Fixes: fb235dc06fac ("btrfs: qgroup: Move half of the qgroup accounting time out of commit trans") CC: stable@vger.kernel.org # 4.14+ Reported-and-tested-by: David Sterba <dsterba@suse.com> Reported-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> [ rebase to latest branch and fix lock assert bug in btrfs/007 ] Signed-off-by: Qu Wenruo <wqu@suse.com> [ copy logs and deadlock analysis from Qu's patch ] Signed-off-by: David Sterba <dsterba@suse.com>
2019-01-17 00:00:57 +08:00
struct preftrees *preftrees, bool lock)
{
struct prelim_ref *ref;
struct extent_buffer *eb;
struct preftree *tree = &preftrees->indirect_missing_keys;
struct rb_node *node;
while ((node = rb_first_cached(&tree->root))) {
ref = rb_entry(node, struct prelim_ref, rbnode);
rb_erase_cached(node, &tree->root);
BUG_ON(ref->parent); /* should not be a direct ref */
BUG_ON(ref->key_for_search.type);
BUG_ON(!ref->wanted_disk_byte);
eb = read_tree_block(fs_info, ref->wanted_disk_byte, 0,
ref->level - 1, NULL);
if (IS_ERR(eb)) {
free_pref(ref);
return PTR_ERR(eb);
} else if (!extent_buffer_uptodate(eb)) {
free_pref(ref);
free_extent_buffer(eb);
return -EIO;
}
btrfs: honor path->skip_locking in backref code Qgroups will do the old roots lookup at delayed ref time, which could be while walking down the extent root while running a delayed ref. This should be fine, except we specifically lock eb's in the backref walking code irrespective of path->skip_locking, which deadlocks the system. Fix up the backref code to honor path->skip_locking, nobody will be modifying the commit_root when we're searching so it's completely safe to do. This happens since fb235dc06fac ("btrfs: qgroup: Move half of the qgroup accounting time out of commit trans"), kernel may lockup with quota enabled. There is one backref trace triggered by snapshot dropping along with write operation in the source subvolume. The example can be reliably reproduced: btrfs-cleaner D 0 4062 2 0x80000000 Call Trace: schedule+0x32/0x90 btrfs_tree_read_lock+0x93/0x130 [btrfs] find_parent_nodes+0x29b/0x1170 [btrfs] btrfs_find_all_roots_safe+0xa8/0x120 [btrfs] btrfs_find_all_roots+0x57/0x70 [btrfs] btrfs_qgroup_trace_extent_post+0x37/0x70 [btrfs] btrfs_qgroup_trace_leaf_items+0x10b/0x140 [btrfs] btrfs_qgroup_trace_subtree+0xc8/0xe0 [btrfs] do_walk_down+0x541/0x5e3 [btrfs] walk_down_tree+0xab/0xe7 [btrfs] btrfs_drop_snapshot+0x356/0x71a [btrfs] btrfs_clean_one_deleted_snapshot+0xb8/0xf0 [btrfs] cleaner_kthread+0x12b/0x160 [btrfs] kthread+0x112/0x130 ret_from_fork+0x27/0x50 When dropping snapshots with qgroup enabled, we will trigger backref walk. However such backref walk at that timing is pretty dangerous, as if one of the parent nodes get WRITE locked by other thread, we could cause a dead lock. For example: FS 260 FS 261 (Dropped) node A node B / \ / \ node C node D node E / \ / \ / \ leaf F|leaf G|leaf H|leaf I|leaf J|leaf K The lock sequence would be: Thread A (cleaner) | Thread B (other writer) ----------------------------------------------------------------------- write_lock(B) | write_lock(D) | ^^^ called by walk_down_tree() | | write_lock(A) | write_lock(D) << Stall read_lock(H) << for backref walk | read_lock(D) << lock owner is | the same thread A | so read lock is OK | read_lock(A) << Stall | So thread A hold write lock D, and needs read lock A to unlock. While thread B holds write lock A, while needs lock D to unlock. This will cause a deadlock. This is not only limited to snapshot dropping case. As the backref walk, even only happens on commit trees, is breaking the normal top-down locking order, makes it deadlock prone. Fixes: fb235dc06fac ("btrfs: qgroup: Move half of the qgroup accounting time out of commit trans") CC: stable@vger.kernel.org # 4.14+ Reported-and-tested-by: David Sterba <dsterba@suse.com> Reported-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> [ rebase to latest branch and fix lock assert bug in btrfs/007 ] Signed-off-by: Qu Wenruo <wqu@suse.com> [ copy logs and deadlock analysis from Qu's patch ] Signed-off-by: David Sterba <dsterba@suse.com>
2019-01-17 00:00:57 +08:00
if (lock)
btrfs_tree_read_lock(eb);
if (btrfs_header_level(eb) == 0)
btrfs_item_key_to_cpu(eb, &ref->key_for_search, 0);
else
btrfs_node_key_to_cpu(eb, &ref->key_for_search, 0);
btrfs: honor path->skip_locking in backref code Qgroups will do the old roots lookup at delayed ref time, which could be while walking down the extent root while running a delayed ref. This should be fine, except we specifically lock eb's in the backref walking code irrespective of path->skip_locking, which deadlocks the system. Fix up the backref code to honor path->skip_locking, nobody will be modifying the commit_root when we're searching so it's completely safe to do. This happens since fb235dc06fac ("btrfs: qgroup: Move half of the qgroup accounting time out of commit trans"), kernel may lockup with quota enabled. There is one backref trace triggered by snapshot dropping along with write operation in the source subvolume. The example can be reliably reproduced: btrfs-cleaner D 0 4062 2 0x80000000 Call Trace: schedule+0x32/0x90 btrfs_tree_read_lock+0x93/0x130 [btrfs] find_parent_nodes+0x29b/0x1170 [btrfs] btrfs_find_all_roots_safe+0xa8/0x120 [btrfs] btrfs_find_all_roots+0x57/0x70 [btrfs] btrfs_qgroup_trace_extent_post+0x37/0x70 [btrfs] btrfs_qgroup_trace_leaf_items+0x10b/0x140 [btrfs] btrfs_qgroup_trace_subtree+0xc8/0xe0 [btrfs] do_walk_down+0x541/0x5e3 [btrfs] walk_down_tree+0xab/0xe7 [btrfs] btrfs_drop_snapshot+0x356/0x71a [btrfs] btrfs_clean_one_deleted_snapshot+0xb8/0xf0 [btrfs] cleaner_kthread+0x12b/0x160 [btrfs] kthread+0x112/0x130 ret_from_fork+0x27/0x50 When dropping snapshots with qgroup enabled, we will trigger backref walk. However such backref walk at that timing is pretty dangerous, as if one of the parent nodes get WRITE locked by other thread, we could cause a dead lock. For example: FS 260 FS 261 (Dropped) node A node B / \ / \ node C node D node E / \ / \ / \ leaf F|leaf G|leaf H|leaf I|leaf J|leaf K The lock sequence would be: Thread A (cleaner) | Thread B (other writer) ----------------------------------------------------------------------- write_lock(B) | write_lock(D) | ^^^ called by walk_down_tree() | | write_lock(A) | write_lock(D) << Stall read_lock(H) << for backref walk | read_lock(D) << lock owner is | the same thread A | so read lock is OK | read_lock(A) << Stall | So thread A hold write lock D, and needs read lock A to unlock. While thread B holds write lock A, while needs lock D to unlock. This will cause a deadlock. This is not only limited to snapshot dropping case. As the backref walk, even only happens on commit trees, is breaking the normal top-down locking order, makes it deadlock prone. Fixes: fb235dc06fac ("btrfs: qgroup: Move half of the qgroup accounting time out of commit trans") CC: stable@vger.kernel.org # 4.14+ Reported-and-tested-by: David Sterba <dsterba@suse.com> Reported-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> [ rebase to latest branch and fix lock assert bug in btrfs/007 ] Signed-off-by: Qu Wenruo <wqu@suse.com> [ copy logs and deadlock analysis from Qu's patch ] Signed-off-by: David Sterba <dsterba@suse.com>
2019-01-17 00:00:57 +08:00
if (lock)
btrfs_tree_read_unlock(eb);
free_extent_buffer(eb);
prelim_ref_insert(fs_info, &preftrees->indirect, ref, NULL);
cond_resched();
}
return 0;
}
/*
* add all currently queued delayed refs from this head whose seq nr is
* smaller or equal that seq to the list
*/
static int add_delayed_refs(const struct btrfs_fs_info *fs_info,
struct btrfs_delayed_ref_head *head, u64 seq,
btrfs: backref, use correct count to resolve normal data refs With the following patches: - btrfs: backref, only collect file extent items matching backref offset - btrfs: backref, not adding refs from shared block when resolving normal backref - btrfs: backref, only search backref entries from leaves of the same root we only collect the normal data refs we want, so the imprecise upper bound total_refs of that EXTENT_ITEM could now be changed to the count of the normal backref entry we want to search. Background and how the patches fit together: Btrfs has two types of data backref. For BTRFS_EXTENT_DATA_REF_KEY type of backref, we don't have the exact block number. Therefore, we need to call resolve_indirect_refs. It uses btrfs_search_slot to locate the leaf block. Then we need to walk through the leaves to search for the EXTENT_DATA items that have disk bytenr matching the extent item (add_all_parents). When resolving indirect refs, we could take entries that don't belong to the backref entry we are searching for right now. For that reason when searching backref entry, we always use total refs of that EXTENT_ITEM rather than individual count. For example: item 11 key (40831553536 EXTENT_ITEM 4194304) itemoff 15460 itemsize extent refs 24 gen 7302 flags DATA shared data backref parent 394985472 count 10 #1 extent data backref root 257 objectid 260 offset 1048576 count 3 #2 extent data backref root 256 objectid 260 offset 65536 count 6 #3 extent data backref root 257 objectid 260 offset 65536 count 5 #4 For example, when searching backref entry #4, we'll use total_refs 24, a very loose loop ending condition, instead of total_refs = 5. But using total_refs = 24 is not accurate. Sometimes, we'll never find all the refs from specific root. As a result, the loop keeps on going until we reach the end of that inode. The first 3 patches, handle 3 different types refs we might encounter. These refs do not belong to the normal backref we are searching, and hence need to be skipped. This patch changes the total_refs to correct number so that we could end loop as soon as we find all the refs we want. btrfs send uses backref to find possible clone sources, the following is a simple test to compare the results with and without this patch: $ btrfs subvolume create /sub1 $ for i in `seq 1 163840`; do dd if=/dev/zero of=/sub1/file bs=64K count=1 seek=$((i-1)) conv=notrunc oflag=direct done $ btrfs subvolume snapshot /sub1 /sub2 $ for i in `seq 1 163840`; do dd if=/dev/zero of=/sub1/file bs=4K count=1 seek=$(((i-1)*16+10)) conv=notrunc oflag=direct done $ btrfs subvolume snapshot -r /sub1 /snap1 $ time btrfs send /snap1 | btrfs receive /volume2 Without this patch: real 69m48.124s user 0m50.199s sys 70m15.600s With this patch: real 1m59.683s user 0m35.421s sys 2m42.684s Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: ethanwu <ethanwu@synology.com> [ add patchset cover letter with background and numbers ] Signed-off-by: David Sterba <dsterba@suse.com>
2020-02-07 17:38:18 +08:00
struct preftrees *preftrees, struct share_check *sc)
{
struct btrfs_delayed_ref_node *node;
struct btrfs_delayed_extent_op *extent_op = head->extent_op;
struct btrfs_key key;
struct btrfs_key tmp_op_key;
struct rb_node *n;
int count;
int ret = 0;
if (extent_op && extent_op->update_key)
btrfs_disk_key_to_cpu(&tmp_op_key, &extent_op->key);
spin_lock(&head->lock);
for (n = rb_first_cached(&head->ref_tree); n; n = rb_next(n)) {
node = rb_entry(n, struct btrfs_delayed_ref_node,
ref_node);
if (node->seq > seq)
continue;
switch (node->action) {
case BTRFS_ADD_DELAYED_EXTENT:
case BTRFS_UPDATE_DELAYED_HEAD:
WARN_ON(1);
continue;
case BTRFS_ADD_DELAYED_REF:
count = node->ref_mod;
break;
case BTRFS_DROP_DELAYED_REF:
count = node->ref_mod * -1;
break;
default:
btrfs: use BUG() instead of BUG_ON(1) BUG_ON(1) leads to bogus warnings from clang when CONFIG_PROFILE_ANNOTATED_BRANCHES is set: fs/btrfs/volumes.c:5041:3: error: variable 'max_chunk_size' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] BUG_ON(1); ^~~~~~~~~ include/asm-generic/bug.h:61:36: note: expanded from macro 'BUG_ON' #define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0) ^~~~~~~~~~~~~~~~~~~ include/linux/compiler.h:48:23: note: expanded from macro 'unlikely' # define unlikely(x) (__branch_check__(x, 0, __builtin_constant_p(x))) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ fs/btrfs/volumes.c:5046:9: note: uninitialized use occurs here max_chunk_size); ^~~~~~~~~~~~~~ include/linux/kernel.h:860:36: note: expanded from macro 'min' #define min(x, y) __careful_cmp(x, y, <) ^ include/linux/kernel.h:853:17: note: expanded from macro '__careful_cmp' __cmp_once(x, y, __UNIQUE_ID(__x), __UNIQUE_ID(__y), op)) ^ include/linux/kernel.h:847:25: note: expanded from macro '__cmp_once' typeof(y) unique_y = (y); \ ^ fs/btrfs/volumes.c:5041:3: note: remove the 'if' if its condition is always true BUG_ON(1); ^ include/asm-generic/bug.h:61:32: note: expanded from macro 'BUG_ON' #define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0) ^ fs/btrfs/volumes.c:4993:20: note: initialize the variable 'max_chunk_size' to silence this warning u64 max_chunk_size; ^ = 0 Change it to BUG() so clang can see that this code path can never continue. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David Sterba <dsterba@suse.com>
2019-03-25 21:02:25 +08:00
BUG();
}
switch (node->type) {
case BTRFS_TREE_BLOCK_REF_KEY: {
/* NORMAL INDIRECT METADATA backref */
struct btrfs_delayed_tree_ref *ref;
ref = btrfs_delayed_node_to_tree_ref(node);
ret = add_indirect_ref(fs_info, preftrees, ref->root,
&tmp_op_key, ref->level + 1,
node->bytenr, count, sc,
GFP_ATOMIC);
break;
}
case BTRFS_SHARED_BLOCK_REF_KEY: {
/* SHARED DIRECT METADATA backref */
struct btrfs_delayed_tree_ref *ref;
ref = btrfs_delayed_node_to_tree_ref(node);
ret = add_direct_ref(fs_info, preftrees, ref->level + 1,
ref->parent, node->bytenr, count,
sc, GFP_ATOMIC);
break;
}
case BTRFS_EXTENT_DATA_REF_KEY: {
/* NORMAL INDIRECT DATA backref */
struct btrfs_delayed_data_ref *ref;
ref = btrfs_delayed_node_to_data_ref(node);
key.objectid = ref->objectid;
key.type = BTRFS_EXTENT_DATA_KEY;
key.offset = ref->offset;
/*
* Found a inum that doesn't match our known inum, we
* know it's shared.
*/
if (sc && sc->inum && ref->objectid != sc->inum) {
ret = BACKREF_FOUND_SHARED;
goto out;
}
ret = add_indirect_ref(fs_info, preftrees, ref->root,
&key, 0, node->bytenr, count, sc,
GFP_ATOMIC);
break;
}
case BTRFS_SHARED_DATA_REF_KEY: {
/* SHARED DIRECT FULL backref */
struct btrfs_delayed_data_ref *ref;
ref = btrfs_delayed_node_to_data_ref(node);
ret = add_direct_ref(fs_info, preftrees, 0, ref->parent,
node->bytenr, count, sc,
GFP_ATOMIC);
break;
}
default:
WARN_ON(1);
}
/*
* We must ignore BACKREF_FOUND_SHARED until all delayed
* refs have been checked.
*/
if (ret && (ret != BACKREF_FOUND_SHARED))
break;
}
if (!ret)
ret = extent_is_shared(sc);
out:
spin_unlock(&head->lock);
return ret;
}
/*
* add all inline backrefs for bytenr to the list
*
* Returns 0 on success, <0 on error, or BACKREF_FOUND_SHARED.
*/
static int add_inline_refs(const struct btrfs_fs_info *fs_info,
struct btrfs_path *path, u64 bytenr,
int *info_level, struct preftrees *preftrees,
btrfs: backref, use correct count to resolve normal data refs With the following patches: - btrfs: backref, only collect file extent items matching backref offset - btrfs: backref, not adding refs from shared block when resolving normal backref - btrfs: backref, only search backref entries from leaves of the same root we only collect the normal data refs we want, so the imprecise upper bound total_refs of that EXTENT_ITEM could now be changed to the count of the normal backref entry we want to search. Background and how the patches fit together: Btrfs has two types of data backref. For BTRFS_EXTENT_DATA_REF_KEY type of backref, we don't have the exact block number. Therefore, we need to call resolve_indirect_refs. It uses btrfs_search_slot to locate the leaf block. Then we need to walk through the leaves to search for the EXTENT_DATA items that have disk bytenr matching the extent item (add_all_parents). When resolving indirect refs, we could take entries that don't belong to the backref entry we are searching for right now. For that reason when searching backref entry, we always use total refs of that EXTENT_ITEM rather than individual count. For example: item 11 key (40831553536 EXTENT_ITEM 4194304) itemoff 15460 itemsize extent refs 24 gen 7302 flags DATA shared data backref parent 394985472 count 10 #1 extent data backref root 257 objectid 260 offset 1048576 count 3 #2 extent data backref root 256 objectid 260 offset 65536 count 6 #3 extent data backref root 257 objectid 260 offset 65536 count 5 #4 For example, when searching backref entry #4, we'll use total_refs 24, a very loose loop ending condition, instead of total_refs = 5. But using total_refs = 24 is not accurate. Sometimes, we'll never find all the refs from specific root. As a result, the loop keeps on going until we reach the end of that inode. The first 3 patches, handle 3 different types refs we might encounter. These refs do not belong to the normal backref we are searching, and hence need to be skipped. This patch changes the total_refs to correct number so that we could end loop as soon as we find all the refs we want. btrfs send uses backref to find possible clone sources, the following is a simple test to compare the results with and without this patch: $ btrfs subvolume create /sub1 $ for i in `seq 1 163840`; do dd if=/dev/zero of=/sub1/file bs=64K count=1 seek=$((i-1)) conv=notrunc oflag=direct done $ btrfs subvolume snapshot /sub1 /sub2 $ for i in `seq 1 163840`; do dd if=/dev/zero of=/sub1/file bs=4K count=1 seek=$(((i-1)*16+10)) conv=notrunc oflag=direct done $ btrfs subvolume snapshot -r /sub1 /snap1 $ time btrfs send /snap1 | btrfs receive /volume2 Without this patch: real 69m48.124s user 0m50.199s sys 70m15.600s With this patch: real 1m59.683s user 0m35.421s sys 2m42.684s Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: ethanwu <ethanwu@synology.com> [ add patchset cover letter with background and numbers ] Signed-off-by: David Sterba <dsterba@suse.com>
2020-02-07 17:38:18 +08:00
struct share_check *sc)
{
int ret = 0;
int slot;
struct extent_buffer *leaf;
struct btrfs_key key;
struct btrfs_key found_key;
unsigned long ptr;
unsigned long end;
struct btrfs_extent_item *ei;
u64 flags;
u64 item_size;
/*
* enumerate all inline refs
*/
leaf = path->nodes[0];
slot = path->slots[0];
item_size = btrfs_item_size_nr(leaf, slot);
BUG_ON(item_size < sizeof(*ei));
ei = btrfs_item_ptr(leaf, slot, struct btrfs_extent_item);
flags = btrfs_extent_flags(leaf, ei);
btrfs_item_key_to_cpu(leaf, &found_key, slot);
ptr = (unsigned long)(ei + 1);
end = (unsigned long)ei + item_size;
if (found_key.type == BTRFS_EXTENT_ITEM_KEY &&
flags & BTRFS_EXTENT_FLAG_TREE_BLOCK) {
struct btrfs_tree_block_info *info;
info = (struct btrfs_tree_block_info *)ptr;
*info_level = btrfs_tree_block_level(leaf, info);
ptr += sizeof(struct btrfs_tree_block_info);
BUG_ON(ptr > end);
} else if (found_key.type == BTRFS_METADATA_ITEM_KEY) {
*info_level = found_key.offset;
} else {
BUG_ON(!(flags & BTRFS_EXTENT_FLAG_DATA));
}
while (ptr < end) {
struct btrfs_extent_inline_ref *iref;
u64 offset;
int type;
iref = (struct btrfs_extent_inline_ref *)ptr;
type = btrfs_get_extent_inline_ref_type(leaf, iref,
BTRFS_REF_TYPE_ANY);
if (type == BTRFS_REF_TYPE_INVALID)
return -EUCLEAN;
offset = btrfs_extent_inline_ref_offset(leaf, iref);
switch (type) {
case BTRFS_SHARED_BLOCK_REF_KEY:
ret = add_direct_ref(fs_info, preftrees,
*info_level + 1, offset,
bytenr, 1, NULL, GFP_NOFS);
break;
case BTRFS_SHARED_DATA_REF_KEY: {
struct btrfs_shared_data_ref *sdref;
int count;
sdref = (struct btrfs_shared_data_ref *)(iref + 1);
count = btrfs_shared_data_ref_count(leaf, sdref);
ret = add_direct_ref(fs_info, preftrees, 0, offset,
bytenr, count, sc, GFP_NOFS);
break;
}
case BTRFS_TREE_BLOCK_REF_KEY:
ret = add_indirect_ref(fs_info, preftrees, offset,
NULL, *info_level + 1,
bytenr, 1, NULL, GFP_NOFS);
break;
case BTRFS_EXTENT_DATA_REF_KEY: {
struct btrfs_extent_data_ref *dref;
int count;
u64 root;
dref = (struct btrfs_extent_data_ref *)(&iref->offset);
count = btrfs_extent_data_ref_count(leaf, dref);
key.objectid = btrfs_extent_data_ref_objectid(leaf,
dref);
key.type = BTRFS_EXTENT_DATA_KEY;
key.offset = btrfs_extent_data_ref_offset(leaf, dref);
if (sc && sc->inum && key.objectid != sc->inum) {
ret = BACKREF_FOUND_SHARED;
break;
}
root = btrfs_extent_data_ref_root(leaf, dref);
ret = add_indirect_ref(fs_info, preftrees, root,
&key, 0, bytenr, count,
sc, GFP_NOFS);
break;
}
default:
WARN_ON(1);
}
if (ret)
return ret;
ptr += btrfs_extent_inline_ref_size(type);
}
return 0;
}
/*
* add all non-inline backrefs for bytenr to the list
*
* Returns 0 on success, <0 on error, or BACKREF_FOUND_SHARED.
*/
static int add_keyed_refs(struct btrfs_fs_info *fs_info,
struct btrfs_path *path, u64 bytenr,
int info_level, struct preftrees *preftrees,
struct share_check *sc)
{
struct btrfs_root *extent_root = fs_info->extent_root;
int ret;
int slot;
struct extent_buffer *leaf;
struct btrfs_key key;
while (1) {
ret = btrfs_next_item(extent_root, path);
if (ret < 0)
break;
if (ret) {
ret = 0;
break;
}
slot = path->slots[0];
leaf = path->nodes[0];
btrfs_item_key_to_cpu(leaf, &key, slot);
if (key.objectid != bytenr)
break;
if (key.type < BTRFS_TREE_BLOCK_REF_KEY)
continue;
if (key.type > BTRFS_SHARED_DATA_REF_KEY)
break;
switch (key.type) {
case BTRFS_SHARED_BLOCK_REF_KEY:
/* SHARED DIRECT METADATA backref */
ret = add_direct_ref(fs_info, preftrees,
info_level + 1, key.offset,
bytenr, 1, NULL, GFP_NOFS);
break;
case BTRFS_SHARED_DATA_REF_KEY: {
/* SHARED DIRECT FULL backref */
struct btrfs_shared_data_ref *sdref;
int count;
sdref = btrfs_item_ptr(leaf, slot,
struct btrfs_shared_data_ref);
count = btrfs_shared_data_ref_count(leaf, sdref);
ret = add_direct_ref(fs_info, preftrees, 0,
key.offset, bytenr, count,
sc, GFP_NOFS);
break;
}
case BTRFS_TREE_BLOCK_REF_KEY:
/* NORMAL INDIRECT METADATA backref */
ret = add_indirect_ref(fs_info, preftrees, key.offset,
NULL, info_level + 1, bytenr,
1, NULL, GFP_NOFS);
break;
case BTRFS_EXTENT_DATA_REF_KEY: {
/* NORMAL INDIRECT DATA backref */
struct btrfs_extent_data_ref *dref;
int count;
u64 root;
dref = btrfs_item_ptr(leaf, slot,
struct btrfs_extent_data_ref);
count = btrfs_extent_data_ref_count(leaf, dref);
key.objectid = btrfs_extent_data_ref_objectid(leaf,
dref);
key.type = BTRFS_EXTENT_DATA_KEY;
key.offset = btrfs_extent_data_ref_offset(leaf, dref);
if (sc && sc->inum && key.objectid != sc->inum) {
ret = BACKREF_FOUND_SHARED;
break;
}
root = btrfs_extent_data_ref_root(leaf, dref);
ret = add_indirect_ref(fs_info, preftrees, root,
&key, 0, bytenr, count,
sc, GFP_NOFS);
break;
}
default:
WARN_ON(1);
}
if (ret)
return ret;
}
return ret;
}
/*
* this adds all existing backrefs (inline backrefs, backrefs and delayed
* refs) for the given bytenr to the refs list, merges duplicates and resolves
* indirect refs to their parent bytenr.
* When roots are found, they're added to the roots list
*
* If time_seq is set to SEQ_LAST, it will not search delayed_refs, and behave
* much like trans == NULL case, the difference only lies in it will not
* commit root.
* The special case is for qgroup to search roots in commit_transaction().
*
* @sc - if !NULL, then immediately return BACKREF_FOUND_SHARED when a
* shared extent is detected.
*
* Otherwise this returns 0 for success and <0 for an error.
*
btrfs: add a flag to iterate_inodes_from_logical to find all extent refs for uncompressed extents The LOGICAL_INO ioctl provides a backward mapping from extent bytenr and offset (encoded as a single logical address) to a list of extent refs. LOGICAL_INO complements TREE_SEARCH, which provides the forward mapping (extent ref -> extent bytenr and offset, or logical address). These are useful capabilities for programs that manipulate extents and extent references from userspace (e.g. dedup and defrag utilities). When the extents are uncompressed (and not encrypted and not other), check_extent_in_eb performs filtering of the extent refs to remove any extent refs which do not contain the same extent offset as the 'logical' parameter's extent offset. This prevents LOGICAL_INO from returning references to more than a single block. To find the set of extent references to an uncompressed extent from [a, b), userspace has to run a loop like this pseudocode: for (i = a; i < b; ++i) extent_ref_set += LOGICAL_INO(i); At each iteration of the loop (up to 32768 iterations for a 128M extent), data we are interested in is collected in the kernel, then deleted by the filter in check_extent_in_eb. When the extents are compressed (or encrypted or other), the 'logical' parameter must be an extent bytenr (the 'a' parameter in the loop). No filtering by extent offset is done (or possible?) so the result is the complete set of extent refs for the entire extent. This removes the need for the loop, since we get all the extent refs in one call. Add an 'ignore_offset' argument to iterate_inodes_from_logical, [...several levels of function call graph...], and check_extent_in_eb, so that we can disable the extent offset filtering for uncompressed extents. This flag can be set by an improved version of the LOGICAL_INO ioctl to get either behavior as desired. There is no functional change in this patch. The new flag is always false. Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Reviewed-by: David Sterba <dsterba@suse.com> [ minor coding style fixes ] Signed-off-by: David Sterba <dsterba@suse.com>
2017-09-23 01:58:45 +08:00
* If ignore_offset is set to false, only extent refs whose offsets match
* extent_item_pos are returned. If true, every extent ref is returned
* and extent_item_pos is ignored.
*
* FIXME some caching might speed things up
*/
static int find_parent_nodes(struct btrfs_trans_handle *trans,
struct btrfs_fs_info *fs_info, u64 bytenr,
u64 time_seq, struct ulist *refs,
struct ulist *roots, const u64 *extent_item_pos,
btrfs: add a flag to iterate_inodes_from_logical to find all extent refs for uncompressed extents The LOGICAL_INO ioctl provides a backward mapping from extent bytenr and offset (encoded as a single logical address) to a list of extent refs. LOGICAL_INO complements TREE_SEARCH, which provides the forward mapping (extent ref -> extent bytenr and offset, or logical address). These are useful capabilities for programs that manipulate extents and extent references from userspace (e.g. dedup and defrag utilities). When the extents are uncompressed (and not encrypted and not other), check_extent_in_eb performs filtering of the extent refs to remove any extent refs which do not contain the same extent offset as the 'logical' parameter's extent offset. This prevents LOGICAL_INO from returning references to more than a single block. To find the set of extent references to an uncompressed extent from [a, b), userspace has to run a loop like this pseudocode: for (i = a; i < b; ++i) extent_ref_set += LOGICAL_INO(i); At each iteration of the loop (up to 32768 iterations for a 128M extent), data we are interested in is collected in the kernel, then deleted by the filter in check_extent_in_eb. When the extents are compressed (or encrypted or other), the 'logical' parameter must be an extent bytenr (the 'a' parameter in the loop). No filtering by extent offset is done (or possible?) so the result is the complete set of extent refs for the entire extent. This removes the need for the loop, since we get all the extent refs in one call. Add an 'ignore_offset' argument to iterate_inodes_from_logical, [...several levels of function call graph...], and check_extent_in_eb, so that we can disable the extent offset filtering for uncompressed extents. This flag can be set by an improved version of the LOGICAL_INO ioctl to get either behavior as desired. There is no functional change in this patch. The new flag is always false. Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Reviewed-by: David Sterba <dsterba@suse.com> [ minor coding style fixes ] Signed-off-by: David Sterba <dsterba@suse.com>
2017-09-23 01:58:45 +08:00
struct share_check *sc, bool ignore_offset)
{
struct btrfs_key key;
struct btrfs_path *path;
struct btrfs_delayed_ref_root *delayed_refs = NULL;
struct btrfs_delayed_ref_head *head;
int info_level = 0;
int ret;
struct prelim_ref *ref;
struct rb_node *node;
struct extent_inode_elem *eie = NULL;
struct preftrees preftrees = {
.direct = PREFTREE_INIT,
.indirect = PREFTREE_INIT,
.indirect_missing_keys = PREFTREE_INIT
};
key.objectid = bytenr;
key.offset = (u64)-1;
if (btrfs_fs_incompat(fs_info, SKINNY_METADATA))
key.type = BTRFS_METADATA_ITEM_KEY;
else
key.type = BTRFS_EXTENT_ITEM_KEY;
path = btrfs_alloc_path();
if (!path)
return -ENOMEM;
if (!trans) {
path->search_commit_root = 1;
path->skip_locking = 1;
}
if (time_seq == SEQ_LAST)
path->skip_locking = 1;
/*
* grab both a lock on the path and a lock on the delayed ref head.
* We need both to get a consistent picture of how the refs look
* at a specified point in time
*/
again:
head = NULL;
ret = btrfs_search_slot(trans, fs_info->extent_root, &key, path, 0, 0);
if (ret < 0)
goto out;
BUG_ON(ret == 0);
#ifdef CONFIG_BTRFS_FS_RUN_SANITY_TESTS
if (trans && likely(trans->type != __TRANS_DUMMY) &&
time_seq != SEQ_LAST) {
#else
if (trans && time_seq != SEQ_LAST) {
#endif
/*
* look if there are updates for this ref queued and lock the
* head
*/
delayed_refs = &trans->transaction->delayed_refs;
spin_lock(&delayed_refs->lock);
head = btrfs_find_delayed_ref_head(delayed_refs, bytenr);
if (head) {
if (!mutex_trylock(&head->mutex)) {
refcount_inc(&head->refs);
spin_unlock(&delayed_refs->lock);
btrfs_release_path(path);
/*
* Mutex was contended, block until it's
* released and try again
*/
mutex_lock(&head->mutex);
mutex_unlock(&head->mutex);
btrfs_put_delayed_ref_head(head);
goto again;
}
spin_unlock(&delayed_refs->lock);
ret = add_delayed_refs(fs_info, head, time_seq,
btrfs: backref, use correct count to resolve normal data refs With the following patches: - btrfs: backref, only collect file extent items matching backref offset - btrfs: backref, not adding refs from shared block when resolving normal backref - btrfs: backref, only search backref entries from leaves of the same root we only collect the normal data refs we want, so the imprecise upper bound total_refs of that EXTENT_ITEM could now be changed to the count of the normal backref entry we want to search. Background and how the patches fit together: Btrfs has two types of data backref. For BTRFS_EXTENT_DATA_REF_KEY type of backref, we don't have the exact block number. Therefore, we need to call resolve_indirect_refs. It uses btrfs_search_slot to locate the leaf block. Then we need to walk through the leaves to search for the EXTENT_DATA items that have disk bytenr matching the extent item (add_all_parents). When resolving indirect refs, we could take entries that don't belong to the backref entry we are searching for right now. For that reason when searching backref entry, we always use total refs of that EXTENT_ITEM rather than individual count. For example: item 11 key (40831553536 EXTENT_ITEM 4194304) itemoff 15460 itemsize extent refs 24 gen 7302 flags DATA shared data backref parent 394985472 count 10 #1 extent data backref root 257 objectid 260 offset 1048576 count 3 #2 extent data backref root 256 objectid 260 offset 65536 count 6 #3 extent data backref root 257 objectid 260 offset 65536 count 5 #4 For example, when searching backref entry #4, we'll use total_refs 24, a very loose loop ending condition, instead of total_refs = 5. But using total_refs = 24 is not accurate. Sometimes, we'll never find all the refs from specific root. As a result, the loop keeps on going until we reach the end of that inode. The first 3 patches, handle 3 different types refs we might encounter. These refs do not belong to the normal backref we are searching, and hence need to be skipped. This patch changes the total_refs to correct number so that we could end loop as soon as we find all the refs we want. btrfs send uses backref to find possible clone sources, the following is a simple test to compare the results with and without this patch: $ btrfs subvolume create /sub1 $ for i in `seq 1 163840`; do dd if=/dev/zero of=/sub1/file bs=64K count=1 seek=$((i-1)) conv=notrunc oflag=direct done $ btrfs subvolume snapshot /sub1 /sub2 $ for i in `seq 1 163840`; do dd if=/dev/zero of=/sub1/file bs=4K count=1 seek=$(((i-1)*16+10)) conv=notrunc oflag=direct done $ btrfs subvolume snapshot -r /sub1 /snap1 $ time btrfs send /snap1 | btrfs receive /volume2 Without this patch: real 69m48.124s user 0m50.199s sys 70m15.600s With this patch: real 1m59.683s user 0m35.421s sys 2m42.684s Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: ethanwu <ethanwu@synology.com> [ add patchset cover letter with background and numbers ] Signed-off-by: David Sterba <dsterba@suse.com>
2020-02-07 17:38:18 +08:00
&preftrees, sc);
mutex_unlock(&head->mutex);
if (ret)
goto out;
} else {
spin_unlock(&delayed_refs->lock);
}
}
if (path->slots[0]) {
struct extent_buffer *leaf;
int slot;
path->slots[0]--;
leaf = path->nodes[0];
slot = path->slots[0];
btrfs_item_key_to_cpu(leaf, &key, slot);
if (key.objectid == bytenr &&
(key.type == BTRFS_EXTENT_ITEM_KEY ||
key.type == BTRFS_METADATA_ITEM_KEY)) {
ret = add_inline_refs(fs_info, path, bytenr,
btrfs: backref, use correct count to resolve normal data refs With the following patches: - btrfs: backref, only collect file extent items matching backref offset - btrfs: backref, not adding refs from shared block when resolving normal backref - btrfs: backref, only search backref entries from leaves of the same root we only collect the normal data refs we want, so the imprecise upper bound total_refs of that EXTENT_ITEM could now be changed to the count of the normal backref entry we want to search. Background and how the patches fit together: Btrfs has two types of data backref. For BTRFS_EXTENT_DATA_REF_KEY type of backref, we don't have the exact block number. Therefore, we need to call resolve_indirect_refs. It uses btrfs_search_slot to locate the leaf block. Then we need to walk through the leaves to search for the EXTENT_DATA items that have disk bytenr matching the extent item (add_all_parents). When resolving indirect refs, we could take entries that don't belong to the backref entry we are searching for right now. For that reason when searching backref entry, we always use total refs of that EXTENT_ITEM rather than individual count. For example: item 11 key (40831553536 EXTENT_ITEM 4194304) itemoff 15460 itemsize extent refs 24 gen 7302 flags DATA shared data backref parent 394985472 count 10 #1 extent data backref root 257 objectid 260 offset 1048576 count 3 #2 extent data backref root 256 objectid 260 offset 65536 count 6 #3 extent data backref root 257 objectid 260 offset 65536 count 5 #4 For example, when searching backref entry #4, we'll use total_refs 24, a very loose loop ending condition, instead of total_refs = 5. But using total_refs = 24 is not accurate. Sometimes, we'll never find all the refs from specific root. As a result, the loop keeps on going until we reach the end of that inode. The first 3 patches, handle 3 different types refs we might encounter. These refs do not belong to the normal backref we are searching, and hence need to be skipped. This patch changes the total_refs to correct number so that we could end loop as soon as we find all the refs we want. btrfs send uses backref to find possible clone sources, the following is a simple test to compare the results with and without this patch: $ btrfs subvolume create /sub1 $ for i in `seq 1 163840`; do dd if=/dev/zero of=/sub1/file bs=64K count=1 seek=$((i-1)) conv=notrunc oflag=direct done $ btrfs subvolume snapshot /sub1 /sub2 $ for i in `seq 1 163840`; do dd if=/dev/zero of=/sub1/file bs=4K count=1 seek=$(((i-1)*16+10)) conv=notrunc oflag=direct done $ btrfs subvolume snapshot -r /sub1 /snap1 $ time btrfs send /snap1 | btrfs receive /volume2 Without this patch: real 69m48.124s user 0m50.199s sys 70m15.600s With this patch: real 1m59.683s user 0m35.421s sys 2m42.684s Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: ethanwu <ethanwu@synology.com> [ add patchset cover letter with background and numbers ] Signed-off-by: David Sterba <dsterba@suse.com>
2020-02-07 17:38:18 +08:00
&info_level, &preftrees, sc);
if (ret)
goto out;
ret = add_keyed_refs(fs_info, path, bytenr, info_level,
&preftrees, sc);
if (ret)
goto out;
}
}
btrfs_release_path(path);
btrfs: honor path->skip_locking in backref code Qgroups will do the old roots lookup at delayed ref time, which could be while walking down the extent root while running a delayed ref. This should be fine, except we specifically lock eb's in the backref walking code irrespective of path->skip_locking, which deadlocks the system. Fix up the backref code to honor path->skip_locking, nobody will be modifying the commit_root when we're searching so it's completely safe to do. This happens since fb235dc06fac ("btrfs: qgroup: Move half of the qgroup accounting time out of commit trans"), kernel may lockup with quota enabled. There is one backref trace triggered by snapshot dropping along with write operation in the source subvolume. The example can be reliably reproduced: btrfs-cleaner D 0 4062 2 0x80000000 Call Trace: schedule+0x32/0x90 btrfs_tree_read_lock+0x93/0x130 [btrfs] find_parent_nodes+0x29b/0x1170 [btrfs] btrfs_find_all_roots_safe+0xa8/0x120 [btrfs] btrfs_find_all_roots+0x57/0x70 [btrfs] btrfs_qgroup_trace_extent_post+0x37/0x70 [btrfs] btrfs_qgroup_trace_leaf_items+0x10b/0x140 [btrfs] btrfs_qgroup_trace_subtree+0xc8/0xe0 [btrfs] do_walk_down+0x541/0x5e3 [btrfs] walk_down_tree+0xab/0xe7 [btrfs] btrfs_drop_snapshot+0x356/0x71a [btrfs] btrfs_clean_one_deleted_snapshot+0xb8/0xf0 [btrfs] cleaner_kthread+0x12b/0x160 [btrfs] kthread+0x112/0x130 ret_from_fork+0x27/0x50 When dropping snapshots with qgroup enabled, we will trigger backref walk. However such backref walk at that timing is pretty dangerous, as if one of the parent nodes get WRITE locked by other thread, we could cause a dead lock. For example: FS 260 FS 261 (Dropped) node A node B / \ / \ node C node D node E / \ / \ / \ leaf F|leaf G|leaf H|leaf I|leaf J|leaf K The lock sequence would be: Thread A (cleaner) | Thread B (other writer) ----------------------------------------------------------------------- write_lock(B) | write_lock(D) | ^^^ called by walk_down_tree() | | write_lock(A) | write_lock(D) << Stall read_lock(H) << for backref walk | read_lock(D) << lock owner is | the same thread A | so read lock is OK | read_lock(A) << Stall | So thread A hold write lock D, and needs read lock A to unlock. While thread B holds write lock A, while needs lock D to unlock. This will cause a deadlock. This is not only limited to snapshot dropping case. As the backref walk, even only happens on commit trees, is breaking the normal top-down locking order, makes it deadlock prone. Fixes: fb235dc06fac ("btrfs: qgroup: Move half of the qgroup accounting time out of commit trans") CC: stable@vger.kernel.org # 4.14+ Reported-and-tested-by: David Sterba <dsterba@suse.com> Reported-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> [ rebase to latest branch and fix lock assert bug in btrfs/007 ] Signed-off-by: Qu Wenruo <wqu@suse.com> [ copy logs and deadlock analysis from Qu's patch ] Signed-off-by: David Sterba <dsterba@suse.com>
2019-01-17 00:00:57 +08:00
ret = add_missing_keys(fs_info, &preftrees, path->skip_locking == 0);
if (ret)
goto out;
WARN_ON(!RB_EMPTY_ROOT(&preftrees.indirect_missing_keys.root.rb_root));
ret = resolve_indirect_refs(fs_info, path, time_seq, &preftrees,
btrfs: backref, use correct count to resolve normal data refs With the following patches: - btrfs: backref, only collect file extent items matching backref offset - btrfs: backref, not adding refs from shared block when resolving normal backref - btrfs: backref, only search backref entries from leaves of the same root we only collect the normal data refs we want, so the imprecise upper bound total_refs of that EXTENT_ITEM could now be changed to the count of the normal backref entry we want to search. Background and how the patches fit together: Btrfs has two types of data backref. For BTRFS_EXTENT_DATA_REF_KEY type of backref, we don't have the exact block number. Therefore, we need to call resolve_indirect_refs. It uses btrfs_search_slot to locate the leaf block. Then we need to walk through the leaves to search for the EXTENT_DATA items that have disk bytenr matching the extent item (add_all_parents). When resolving indirect refs, we could take entries that don't belong to the backref entry we are searching for right now. For that reason when searching backref entry, we always use total refs of that EXTENT_ITEM rather than individual count. For example: item 11 key (40831553536 EXTENT_ITEM 4194304) itemoff 15460 itemsize extent refs 24 gen 7302 flags DATA shared data backref parent 394985472 count 10 #1 extent data backref root 257 objectid 260 offset 1048576 count 3 #2 extent data backref root 256 objectid 260 offset 65536 count 6 #3 extent data backref root 257 objectid 260 offset 65536 count 5 #4 For example, when searching backref entry #4, we'll use total_refs 24, a very loose loop ending condition, instead of total_refs = 5. But using total_refs = 24 is not accurate. Sometimes, we'll never find all the refs from specific root. As a result, the loop keeps on going until we reach the end of that inode. The first 3 patches, handle 3 different types refs we might encounter. These refs do not belong to the normal backref we are searching, and hence need to be skipped. This patch changes the total_refs to correct number so that we could end loop as soon as we find all the refs we want. btrfs send uses backref to find possible clone sources, the following is a simple test to compare the results with and without this patch: $ btrfs subvolume create /sub1 $ for i in `seq 1 163840`; do dd if=/dev/zero of=/sub1/file bs=64K count=1 seek=$((i-1)) conv=notrunc oflag=direct done $ btrfs subvolume snapshot /sub1 /sub2 $ for i in `seq 1 163840`; do dd if=/dev/zero of=/sub1/file bs=4K count=1 seek=$(((i-1)*16+10)) conv=notrunc oflag=direct done $ btrfs subvolume snapshot -r /sub1 /snap1 $ time btrfs send /snap1 | btrfs receive /volume2 Without this patch: real 69m48.124s user 0m50.199s sys 70m15.600s With this patch: real 1m59.683s user 0m35.421s sys 2m42.684s Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: ethanwu <ethanwu@synology.com> [ add patchset cover letter with background and numbers ] Signed-off-by: David Sterba <dsterba@suse.com>
2020-02-07 17:38:18 +08:00
extent_item_pos, sc, ignore_offset);
if (ret)
goto out;
WARN_ON(!RB_EMPTY_ROOT(&preftrees.indirect.root.rb_root));
/*
* This walks the tree of merged and resolved refs. Tree blocks are
* read in as needed. Unique entries are added to the ulist, and
* the list of found roots is updated.
*
* We release the entire tree in one go before returning.
*/
node = rb_first_cached(&preftrees.direct.root);
while (node) {
ref = rb_entry(node, struct prelim_ref, rbnode);
node = rb_next(&ref->rbnode);
btrfs: remove spurious WARN_ON(ref->count < 0) in find_parent_nodes Until v4.14, this warning was very infrequent: WARNING: CPU: 3 PID: 18172 at fs/btrfs/backref.c:1391 find_parent_nodes+0xc41/0x14e0 Modules linked in: [...] CPU: 3 PID: 18172 Comm: bees Tainted: G D W L 4.11.9-zb64+ #1 Hardware name: System manufacturer System Product Name/M5A78L-M/USB3, BIOS 2101 12/02/2014 Call Trace: dump_stack+0x85/0xc2 __warn+0xd1/0xf0 warn_slowpath_null+0x1d/0x20 find_parent_nodes+0xc41/0x14e0 __btrfs_find_all_roots+0xad/0x120 ? extent_same_check_offsets+0x70/0x70 iterate_extent_inodes+0x168/0x300 iterate_inodes_from_logical+0x87/0xb0 ? iterate_inodes_from_logical+0x87/0xb0 ? extent_same_check_offsets+0x70/0x70 btrfs_ioctl+0x8ac/0x2820 ? lock_acquire+0xc2/0x200 do_vfs_ioctl+0x91/0x700 ? __fget+0x112/0x200 SyS_ioctl+0x79/0x90 entry_SYSCALL_64_fastpath+0x23/0xc6 ? trace_hardirqs_off_caller+0x1f/0x140 Starting with v4.14 (specifically 86d5f9944252 ("btrfs: convert prelimary reference tracking to use rbtrees")) the WARN_ON occurs three orders of magnitude more frequently--almost once per second while running workloads like bees. Replace the WARN_ON() with a comment rationale for its removal. The rationale is paraphrased from an explanation by Edmund Nadolski <enadolski@suse.de> on the linux-btrfs mailing list. Fixes: 8da6d5815c59 ("Btrfs: added btrfs_find_all_roots()") Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Reviewed-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-01-24 11:22:09 +08:00
/*
* ref->count < 0 can happen here if there are delayed
* refs with a node->action of BTRFS_DROP_DELAYED_REF.
* prelim_ref_insert() relies on this when merging
* identical refs to keep the overall count correct.
* prelim_ref_insert() will merge only those refs
* which compare identically. Any refs having
* e.g. different offsets would not be merged,
* and would retain their original ref->count < 0.
*/
if (roots && ref->count && ref->root_id && ref->parent == 0) {
if (sc && sc->root_objectid &&
ref->root_id != sc->root_objectid) {
ret = BACKREF_FOUND_SHARED;
goto out;
}
/* no parent == root of tree */
ret = ulist_add(roots, ref->root_id, 0, GFP_NOFS);
if (ret < 0)
goto out;
}
if (ref->count && ref->parent) {
if (extent_item_pos && !ref->inode_list &&
ref->level == 0) {
struct extent_buffer *eb;
eb = read_tree_block(fs_info, ref->parent, 0,
ref->level, NULL);
if (IS_ERR(eb)) {
ret = PTR_ERR(eb);
goto out;
} else if (!extent_buffer_uptodate(eb)) {
free_extent_buffer(eb);
ret = -EIO;
goto out;
}
btrfs: honor path->skip_locking in backref code Qgroups will do the old roots lookup at delayed ref time, which could be while walking down the extent root while running a delayed ref. This should be fine, except we specifically lock eb's in the backref walking code irrespective of path->skip_locking, which deadlocks the system. Fix up the backref code to honor path->skip_locking, nobody will be modifying the commit_root when we're searching so it's completely safe to do. This happens since fb235dc06fac ("btrfs: qgroup: Move half of the qgroup accounting time out of commit trans"), kernel may lockup with quota enabled. There is one backref trace triggered by snapshot dropping along with write operation in the source subvolume. The example can be reliably reproduced: btrfs-cleaner D 0 4062 2 0x80000000 Call Trace: schedule+0x32/0x90 btrfs_tree_read_lock+0x93/0x130 [btrfs] find_parent_nodes+0x29b/0x1170 [btrfs] btrfs_find_all_roots_safe+0xa8/0x120 [btrfs] btrfs_find_all_roots+0x57/0x70 [btrfs] btrfs_qgroup_trace_extent_post+0x37/0x70 [btrfs] btrfs_qgroup_trace_leaf_items+0x10b/0x140 [btrfs] btrfs_qgroup_trace_subtree+0xc8/0xe0 [btrfs] do_walk_down+0x541/0x5e3 [btrfs] walk_down_tree+0xab/0xe7 [btrfs] btrfs_drop_snapshot+0x356/0x71a [btrfs] btrfs_clean_one_deleted_snapshot+0xb8/0xf0 [btrfs] cleaner_kthread+0x12b/0x160 [btrfs] kthread+0x112/0x130 ret_from_fork+0x27/0x50 When dropping snapshots with qgroup enabled, we will trigger backref walk. However such backref walk at that timing is pretty dangerous, as if one of the parent nodes get WRITE locked by other thread, we could cause a dead lock. For example: FS 260 FS 261 (Dropped) node A node B / \ / \ node C node D node E / \ / \ / \ leaf F|leaf G|leaf H|leaf I|leaf J|leaf K The lock sequence would be: Thread A (cleaner) | Thread B (other writer) ----------------------------------------------------------------------- write_lock(B) | write_lock(D) | ^^^ called by walk_down_tree() | | write_lock(A) | write_lock(D) << Stall read_lock(H) << for backref walk | read_lock(D) << lock owner is | the same thread A | so read lock is OK | read_lock(A) << Stall | So thread A hold write lock D, and needs read lock A to unlock. While thread B holds write lock A, while needs lock D to unlock. This will cause a deadlock. This is not only limited to snapshot dropping case. As the backref walk, even only happens on commit trees, is breaking the normal top-down locking order, makes it deadlock prone. Fixes: fb235dc06fac ("btrfs: qgroup: Move half of the qgroup accounting time out of commit trans") CC: stable@vger.kernel.org # 4.14+ Reported-and-tested-by: David Sterba <dsterba@suse.com> Reported-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> [ rebase to latest branch and fix lock assert bug in btrfs/007 ] Signed-off-by: Qu Wenruo <wqu@suse.com> [ copy logs and deadlock analysis from Qu's patch ] Signed-off-by: David Sterba <dsterba@suse.com>
2019-01-17 00:00:57 +08:00
if (!path->skip_locking) {
btrfs_tree_read_lock(eb);
btrfs_set_lock_blocking_read(eb);
}
ret = find_extent_in_eb(eb, bytenr,
btrfs: add a flag to iterate_inodes_from_logical to find all extent refs for uncompressed extents The LOGICAL_INO ioctl provides a backward mapping from extent bytenr and offset (encoded as a single logical address) to a list of extent refs. LOGICAL_INO complements TREE_SEARCH, which provides the forward mapping (extent ref -> extent bytenr and offset, or logical address). These are useful capabilities for programs that manipulate extents and extent references from userspace (e.g. dedup and defrag utilities). When the extents are uncompressed (and not encrypted and not other), check_extent_in_eb performs filtering of the extent refs to remove any extent refs which do not contain the same extent offset as the 'logical' parameter's extent offset. This prevents LOGICAL_INO from returning references to more than a single block. To find the set of extent references to an uncompressed extent from [a, b), userspace has to run a loop like this pseudocode: for (i = a; i < b; ++i) extent_ref_set += LOGICAL_INO(i); At each iteration of the loop (up to 32768 iterations for a 128M extent), data we are interested in is collected in the kernel, then deleted by the filter in check_extent_in_eb. When the extents are compressed (or encrypted or other), the 'logical' parameter must be an extent bytenr (the 'a' parameter in the loop). No filtering by extent offset is done (or possible?) so the result is the complete set of extent refs for the entire extent. This removes the need for the loop, since we get all the extent refs in one call. Add an 'ignore_offset' argument to iterate_inodes_from_logical, [...several levels of function call graph...], and check_extent_in_eb, so that we can disable the extent offset filtering for uncompressed extents. This flag can be set by an improved version of the LOGICAL_INO ioctl to get either behavior as desired. There is no functional change in this patch. The new flag is always false. Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Reviewed-by: David Sterba <dsterba@suse.com> [ minor coding style fixes ] Signed-off-by: David Sterba <dsterba@suse.com>
2017-09-23 01:58:45 +08:00
*extent_item_pos, &eie, ignore_offset);
btrfs: honor path->skip_locking in backref code Qgroups will do the old roots lookup at delayed ref time, which could be while walking down the extent root while running a delayed ref. This should be fine, except we specifically lock eb's in the backref walking code irrespective of path->skip_locking, which deadlocks the system. Fix up the backref code to honor path->skip_locking, nobody will be modifying the commit_root when we're searching so it's completely safe to do. This happens since fb235dc06fac ("btrfs: qgroup: Move half of the qgroup accounting time out of commit trans"), kernel may lockup with quota enabled. There is one backref trace triggered by snapshot dropping along with write operation in the source subvolume. The example can be reliably reproduced: btrfs-cleaner D 0 4062 2 0x80000000 Call Trace: schedule+0x32/0x90 btrfs_tree_read_lock+0x93/0x130 [btrfs] find_parent_nodes+0x29b/0x1170 [btrfs] btrfs_find_all_roots_safe+0xa8/0x120 [btrfs] btrfs_find_all_roots+0x57/0x70 [btrfs] btrfs_qgroup_trace_extent_post+0x37/0x70 [btrfs] btrfs_qgroup_trace_leaf_items+0x10b/0x140 [btrfs] btrfs_qgroup_trace_subtree+0xc8/0xe0 [btrfs] do_walk_down+0x541/0x5e3 [btrfs] walk_down_tree+0xab/0xe7 [btrfs] btrfs_drop_snapshot+0x356/0x71a [btrfs] btrfs_clean_one_deleted_snapshot+0xb8/0xf0 [btrfs] cleaner_kthread+0x12b/0x160 [btrfs] kthread+0x112/0x130 ret_from_fork+0x27/0x50 When dropping snapshots with qgroup enabled, we will trigger backref walk. However such backref walk at that timing is pretty dangerous, as if one of the parent nodes get WRITE locked by other thread, we could cause a dead lock. For example: FS 260 FS 261 (Dropped) node A node B / \ / \ node C node D node E / \ / \ / \ leaf F|leaf G|leaf H|leaf I|leaf J|leaf K The lock sequence would be: Thread A (cleaner) | Thread B (other writer) ----------------------------------------------------------------------- write_lock(B) | write_lock(D) | ^^^ called by walk_down_tree() | | write_lock(A) | write_lock(D) << Stall read_lock(H) << for backref walk | read_lock(D) << lock owner is | the same thread A | so read lock is OK | read_lock(A) << Stall | So thread A hold write lock D, and needs read lock A to unlock. While thread B holds write lock A, while needs lock D to unlock. This will cause a deadlock. This is not only limited to snapshot dropping case. As the backref walk, even only happens on commit trees, is breaking the normal top-down locking order, makes it deadlock prone. Fixes: fb235dc06fac ("btrfs: qgroup: Move half of the qgroup accounting time out of commit trans") CC: stable@vger.kernel.org # 4.14+ Reported-and-tested-by: David Sterba <dsterba@suse.com> Reported-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> [ rebase to latest branch and fix lock assert bug in btrfs/007 ] Signed-off-by: Qu Wenruo <wqu@suse.com> [ copy logs and deadlock analysis from Qu's patch ] Signed-off-by: David Sterba <dsterba@suse.com>
2019-01-17 00:00:57 +08:00
if (!path->skip_locking)
btrfs_tree_read_unlock_blocking(eb);
free_extent_buffer(eb);
if (ret < 0)
goto out;
ref->inode_list = eie;
}
Btrfs: Fix memory corruption by ulist_add_merge() on 32bit arch We've got bug reports that btrfs crashes when quota is enabled on 32bit kernel, typically with the Oops like below: BUG: unable to handle kernel NULL pointer dereference at 00000004 IP: [<f9234590>] find_parent_nodes+0x360/0x1380 [btrfs] *pde = 00000000 Oops: 0000 [#1] SMP CPU: 0 PID: 151 Comm: kworker/u8:2 Tainted: G S W 3.15.2-1.gd43d97e-default #1 Workqueue: btrfs-qgroup-rescan normal_work_helper [btrfs] task: f1478130 ti: f147c000 task.ti: f147c000 EIP: 0060:[<f9234590>] EFLAGS: 00010213 CPU: 0 EIP is at find_parent_nodes+0x360/0x1380 [btrfs] EAX: f147dda8 EBX: f147ddb0 ECX: 00000011 EDX: 00000000 ESI: 00000000 EDI: f147dda4 EBP: f147ddf8 ESP: f147dd38 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 CR0: 8005003b CR2: 00000004 CR3: 00bf3000 CR4: 00000690 Stack: 00000000 00000000 f147dda4 00000050 00000001 00000000 00000001 00000050 00000001 00000000 d3059000 00000001 00000022 000000a8 00000000 00000000 00000000 000000a1 00000000 00000000 00000001 00000000 00000000 11800000 Call Trace: [<f923564d>] __btrfs_find_all_roots+0x9d/0xf0 [btrfs] [<f9237bb1>] btrfs_qgroup_rescan_worker+0x401/0x760 [btrfs] [<f9206148>] normal_work_helper+0xc8/0x270 [btrfs] [<c025e38b>] process_one_work+0x11b/0x390 [<c025eea1>] worker_thread+0x101/0x340 [<c026432b>] kthread+0x9b/0xb0 [<c0712a71>] ret_from_kernel_thread+0x21/0x30 [<c0264290>] kthread_create_on_node+0x110/0x110 This indicates a NULL corruption in prefs_delayed list. The further investigation and bisection pointed that the call of ulist_add_merge() results in the corruption. ulist_add_merge() takes u64 as aux and writes a 64bit value into old_aux. The callers of this function in backref.c, however, pass a pointer of a pointer to old_aux. That is, the function overwrites 64bit value on 32bit pointer. This caused a NULL in the adjacent variable, in this case, prefs_delayed. Here is a quick attempt to band-aid over this: a new function, ulist_add_merge_ptr() is introduced to pass/store properly a pointer value instead of u64. There are still ugly void ** cast remaining in the callers because void ** cannot be taken implicitly. But, it's safer than explicit cast to u64, anyway. Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=887046 Cc: <stable@vger.kernel.org> [v3.11+] Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Chris Mason <clm@fb.com>
2014-07-28 16:57:04 +08:00
ret = ulist_add_merge_ptr(refs, ref->parent,
ref->inode_list,
(void **)&eie, GFP_NOFS);
if (ret < 0)
goto out;
if (!ret && extent_item_pos) {
/*
* we've recorded that parent, so we must extend
* its inode list here
*/
BUG_ON(!eie);
while (eie->next)
eie = eie->next;
eie->next = ref->inode_list;
}
eie = NULL;
}
cond_resched();
}
out:
btrfs_free_path(path);
prelim_release(&preftrees.direct);
prelim_release(&preftrees.indirect);
prelim_release(&preftrees.indirect_missing_keys);
if (ret < 0)
free_inode_elem_list(eie);
return ret;
}
static void free_leaf_list(struct ulist *blocks)
{
struct ulist_node *node = NULL;
struct extent_inode_elem *eie;
struct ulist_iterator uiter;
ULIST_ITER_INIT(&uiter);
while ((node = ulist_next(blocks, &uiter))) {
if (!node->aux)
continue;
eie = unode_aux_to_inode_list(node);
free_inode_elem_list(eie);
node->aux = 0;
}
ulist_free(blocks);
}
/*
* Finds all leafs with a reference to the specified combination of bytenr and
* offset. key_list_head will point to a list of corresponding keys (caller must
* free each list element). The leafs will be stored in the leafs ulist, which
* must be freed with ulist_free.
*
* returns 0 on success, <0 on error
*/
int btrfs_find_all_leafs(struct btrfs_trans_handle *trans,
struct btrfs_fs_info *fs_info, u64 bytenr,
u64 time_seq, struct ulist **leafs,
const u64 *extent_item_pos, bool ignore_offset)
{
int ret;
*leafs = ulist_alloc(GFP_NOFS);
if (!*leafs)
return -ENOMEM;
ret = find_parent_nodes(trans, fs_info, bytenr, time_seq,
btrfs: add a flag to iterate_inodes_from_logical to find all extent refs for uncompressed extents The LOGICAL_INO ioctl provides a backward mapping from extent bytenr and offset (encoded as a single logical address) to a list of extent refs. LOGICAL_INO complements TREE_SEARCH, which provides the forward mapping (extent ref -> extent bytenr and offset, or logical address). These are useful capabilities for programs that manipulate extents and extent references from userspace (e.g. dedup and defrag utilities). When the extents are uncompressed (and not encrypted and not other), check_extent_in_eb performs filtering of the extent refs to remove any extent refs which do not contain the same extent offset as the 'logical' parameter's extent offset. This prevents LOGICAL_INO from returning references to more than a single block. To find the set of extent references to an uncompressed extent from [a, b), userspace has to run a loop like this pseudocode: for (i = a; i < b; ++i) extent_ref_set += LOGICAL_INO(i); At each iteration of the loop (up to 32768 iterations for a 128M extent), data we are interested in is collected in the kernel, then deleted by the filter in check_extent_in_eb. When the extents are compressed (or encrypted or other), the 'logical' parameter must be an extent bytenr (the 'a' parameter in the loop). No filtering by extent offset is done (or possible?) so the result is the complete set of extent refs for the entire extent. This removes the need for the loop, since we get all the extent refs in one call. Add an 'ignore_offset' argument to iterate_inodes_from_logical, [...several levels of function call graph...], and check_extent_in_eb, so that we can disable the extent offset filtering for uncompressed extents. This flag can be set by an improved version of the LOGICAL_INO ioctl to get either behavior as desired. There is no functional change in this patch. The new flag is always false. Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Reviewed-by: David Sterba <dsterba@suse.com> [ minor coding style fixes ] Signed-off-by: David Sterba <dsterba@suse.com>
2017-09-23 01:58:45 +08:00
*leafs, NULL, extent_item_pos, NULL, ignore_offset);
if (ret < 0 && ret != -ENOENT) {
free_leaf_list(*leafs);
return ret;
}
return 0;
}
/*
* walk all backrefs for a given extent to find all roots that reference this
* extent. Walking a backref means finding all extents that reference this
* extent and in turn walk the backrefs of those, too. Naturally this is a
* recursive process, but here it is implemented in an iterative fashion: We
* find all referencing extents for the extent in question and put them on a
* list. In turn, we find all referencing extents for those, further appending
* to the list. The way we iterate the list allows adding more elements after
* the current while iterating. The process stops when we reach the end of the
* list. Found roots are added to the roots list.
*
* returns 0 on success, < 0 on error.
*/
static int btrfs_find_all_roots_safe(struct btrfs_trans_handle *trans,
struct btrfs_fs_info *fs_info, u64 bytenr,
btrfs: add a flag to iterate_inodes_from_logical to find all extent refs for uncompressed extents The LOGICAL_INO ioctl provides a backward mapping from extent bytenr and offset (encoded as a single logical address) to a list of extent refs. LOGICAL_INO complements TREE_SEARCH, which provides the forward mapping (extent ref -> extent bytenr and offset, or logical address). These are useful capabilities for programs that manipulate extents and extent references from userspace (e.g. dedup and defrag utilities). When the extents are uncompressed (and not encrypted and not other), check_extent_in_eb performs filtering of the extent refs to remove any extent refs which do not contain the same extent offset as the 'logical' parameter's extent offset. This prevents LOGICAL_INO from returning references to more than a single block. To find the set of extent references to an uncompressed extent from [a, b), userspace has to run a loop like this pseudocode: for (i = a; i < b; ++i) extent_ref_set += LOGICAL_INO(i); At each iteration of the loop (up to 32768 iterations for a 128M extent), data we are interested in is collected in the kernel, then deleted by the filter in check_extent_in_eb. When the extents are compressed (or encrypted or other), the 'logical' parameter must be an extent bytenr (the 'a' parameter in the loop). No filtering by extent offset is done (or possible?) so the result is the complete set of extent refs for the entire extent. This removes the need for the loop, since we get all the extent refs in one call. Add an 'ignore_offset' argument to iterate_inodes_from_logical, [...several levels of function call graph...], and check_extent_in_eb, so that we can disable the extent offset filtering for uncompressed extents. This flag can be set by an improved version of the LOGICAL_INO ioctl to get either behavior as desired. There is no functional change in this patch. The new flag is always false. Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Reviewed-by: David Sterba <dsterba@suse.com> [ minor coding style fixes ] Signed-off-by: David Sterba <dsterba@suse.com>
2017-09-23 01:58:45 +08:00
u64 time_seq, struct ulist **roots,
bool ignore_offset)
{
struct ulist *tmp;
struct ulist_node *node = NULL;
struct ulist_iterator uiter;
int ret;
tmp = ulist_alloc(GFP_NOFS);
if (!tmp)
return -ENOMEM;
*roots = ulist_alloc(GFP_NOFS);
if (!*roots) {
ulist_free(tmp);
return -ENOMEM;
}
ULIST_ITER_INIT(&uiter);
while (1) {
ret = find_parent_nodes(trans, fs_info, bytenr, time_seq,
btrfs: add a flag to iterate_inodes_from_logical to find all extent refs for uncompressed extents The LOGICAL_INO ioctl provides a backward mapping from extent bytenr and offset (encoded as a single logical address) to a list of extent refs. LOGICAL_INO complements TREE_SEARCH, which provides the forward mapping (extent ref -> extent bytenr and offset, or logical address). These are useful capabilities for programs that manipulate extents and extent references from userspace (e.g. dedup and defrag utilities). When the extents are uncompressed (and not encrypted and not other), check_extent_in_eb performs filtering of the extent refs to remove any extent refs which do not contain the same extent offset as the 'logical' parameter's extent offset. This prevents LOGICAL_INO from returning references to more than a single block. To find the set of extent references to an uncompressed extent from [a, b), userspace has to run a loop like this pseudocode: for (i = a; i < b; ++i) extent_ref_set += LOGICAL_INO(i); At each iteration of the loop (up to 32768 iterations for a 128M extent), data we are interested in is collected in the kernel, then deleted by the filter in check_extent_in_eb. When the extents are compressed (or encrypted or other), the 'logical' parameter must be an extent bytenr (the 'a' parameter in the loop). No filtering by extent offset is done (or possible?) so the result is the complete set of extent refs for the entire extent. This removes the need for the loop, since we get all the extent refs in one call. Add an 'ignore_offset' argument to iterate_inodes_from_logical, [...several levels of function call graph...], and check_extent_in_eb, so that we can disable the extent offset filtering for uncompressed extents. This flag can be set by an improved version of the LOGICAL_INO ioctl to get either behavior as desired. There is no functional change in this patch. The new flag is always false. Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Reviewed-by: David Sterba <dsterba@suse.com> [ minor coding style fixes ] Signed-off-by: David Sterba <dsterba@suse.com>
2017-09-23 01:58:45 +08:00
tmp, *roots, NULL, NULL, ignore_offset);
if (ret < 0 && ret != -ENOENT) {
ulist_free(tmp);
ulist_free(*roots);
return ret;
}
node = ulist_next(tmp, &uiter);
if (!node)
break;
bytenr = node->val;
Btrfs: add a reschedule point in btrfs_find_all_roots() I can easily trigger the following warnings when enabling quota in my virtual machine(running Opensuse), Steps are firstly creating a subvolume full of fragment extents, and then create many snapshots (500 in my test case). [ 2362.808459] BUG: soft lockup - CPU#0 stuck for 22s! [btrfs-qgroup-re:1970] [ 2362.809023] task: e4af8450 ti: e371c000 task.ti: e371c000 [ 2362.809026] EIP: 0060:[<fa38f4ae>] EFLAGS: 00000246 CPU: 0 [ 2362.809049] EIP is at __merge_refs+0x5e/0x100 [btrfs] [ 2362.809051] EAX: 00000000 EBX: cfadbcf0 ECX: 00000000 EDX: cfadbcb0 [ 2362.809052] ESI: dd8d3370 EDI: e371dde0 EBP: e371dd6c ESP: e371dd5c [ 2362.809054] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 2362.809055] CR0: 80050033 CR2: ac454d50 CR3: 009a9000 CR4: 001407d0 [ 2362.809099] Stack: [ 2362.809100] 00000001 e371dde0 dfcc6890 f29f8000 e371de28 fa39016d 00000011 00000001 [ 2362.809105] 99bfc000 00000000 93928000 00000000 00000001 00000050 e371dda8 00000001 [ 2362.809109] f3a31000 f3413000 00000001 e371ddb8 000040a8 00000202 00000000 00000023 [ 2362.809113] Call Trace: [ 2362.809136] [<fa39016d>] find_parent_nodes+0x34d/0x1280 [btrfs] [ 2362.809156] [<fa391172>] btrfs_find_all_roots+0xb2/0x110 [btrfs] [ 2362.809174] [<fa3934a8>] btrfs_qgroup_rescan_worker+0x358/0x7a0 [btrfs] [ 2362.809180] [<c024d0ce>] ? lock_timer_base.isra.39+0x1e/0x40 [ 2362.809199] [<fa3648df>] worker_loop+0xff/0x470 [btrfs] [ 2362.809204] [<c027a88a>] ? __wake_up_locked+0x1a/0x20 [ 2362.809221] [<fa3647e0>] ? btrfs_queue_worker+0x2b0/0x2b0 [btrfs] [ 2362.809225] [<c025ebbc>] kthread+0x9c/0xb0 [ 2362.809229] [<c06b487b>] ret_from_kernel_thread+0x1b/0x30 [ 2362.809233] [<c025eb20>] ? kthread_create_on_node+0x110/0x110 By adding a reschedule point at the end of btrfs_find_all_roots(), i no longer hit these warnings. Cc: Josef Bacik <jbacik@fb.com> Signed-off-by: Wang Shilong <wangsl.fnst@cn.fujitsu.com> Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2014-01-26 22:32:18 +08:00
cond_resched();
}
ulist_free(tmp);
return 0;
}
int btrfs_find_all_roots(struct btrfs_trans_handle *trans,
struct btrfs_fs_info *fs_info, u64 bytenr,
btrfs: add a flag to iterate_inodes_from_logical to find all extent refs for uncompressed extents The LOGICAL_INO ioctl provides a backward mapping from extent bytenr and offset (encoded as a single logical address) to a list of extent refs. LOGICAL_INO complements TREE_SEARCH, which provides the forward mapping (extent ref -> extent bytenr and offset, or logical address). These are useful capabilities for programs that manipulate extents and extent references from userspace (e.g. dedup and defrag utilities). When the extents are uncompressed (and not encrypted and not other), check_extent_in_eb performs filtering of the extent refs to remove any extent refs which do not contain the same extent offset as the 'logical' parameter's extent offset. This prevents LOGICAL_INO from returning references to more than a single block. To find the set of extent references to an uncompressed extent from [a, b), userspace has to run a loop like this pseudocode: for (i = a; i < b; ++i) extent_ref_set += LOGICAL_INO(i); At each iteration of the loop (up to 32768 iterations for a 128M extent), data we are interested in is collected in the kernel, then deleted by the filter in check_extent_in_eb. When the extents are compressed (or encrypted or other), the 'logical' parameter must be an extent bytenr (the 'a' parameter in the loop). No filtering by extent offset is done (or possible?) so the result is the complete set of extent refs for the entire extent. This removes the need for the loop, since we get all the extent refs in one call. Add an 'ignore_offset' argument to iterate_inodes_from_logical, [...several levels of function call graph...], and check_extent_in_eb, so that we can disable the extent offset filtering for uncompressed extents. This flag can be set by an improved version of the LOGICAL_INO ioctl to get either behavior as desired. There is no functional change in this patch. The new flag is always false. Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Reviewed-by: David Sterba <dsterba@suse.com> [ minor coding style fixes ] Signed-off-by: David Sterba <dsterba@suse.com>
2017-09-23 01:58:45 +08:00
u64 time_seq, struct ulist **roots,
bool ignore_offset)
{
int ret;
if (!trans)
down_read(&fs_info->commit_root_sem);
ret = btrfs_find_all_roots_safe(trans, fs_info, bytenr,
btrfs: add a flag to iterate_inodes_from_logical to find all extent refs for uncompressed extents The LOGICAL_INO ioctl provides a backward mapping from extent bytenr and offset (encoded as a single logical address) to a list of extent refs. LOGICAL_INO complements TREE_SEARCH, which provides the forward mapping (extent ref -> extent bytenr and offset, or logical address). These are useful capabilities for programs that manipulate extents and extent references from userspace (e.g. dedup and defrag utilities). When the extents are uncompressed (and not encrypted and not other), check_extent_in_eb performs filtering of the extent refs to remove any extent refs which do not contain the same extent offset as the 'logical' parameter's extent offset. This prevents LOGICAL_INO from returning references to more than a single block. To find the set of extent references to an uncompressed extent from [a, b), userspace has to run a loop like this pseudocode: for (i = a; i < b; ++i) extent_ref_set += LOGICAL_INO(i); At each iteration of the loop (up to 32768 iterations for a 128M extent), data we are interested in is collected in the kernel, then deleted by the filter in check_extent_in_eb. When the extents are compressed (or encrypted or other), the 'logical' parameter must be an extent bytenr (the 'a' parameter in the loop). No filtering by extent offset is done (or possible?) so the result is the complete set of extent refs for the entire extent. This removes the need for the loop, since we get all the extent refs in one call. Add an 'ignore_offset' argument to iterate_inodes_from_logical, [...several levels of function call graph...], and check_extent_in_eb, so that we can disable the extent offset filtering for uncompressed extents. This flag can be set by an improved version of the LOGICAL_INO ioctl to get either behavior as desired. There is no functional change in this patch. The new flag is always false. Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Reviewed-by: David Sterba <dsterba@suse.com> [ minor coding style fixes ] Signed-off-by: David Sterba <dsterba@suse.com>
2017-09-23 01:58:45 +08:00
time_seq, roots, ignore_offset);
if (!trans)
up_read(&fs_info->commit_root_sem);
return ret;
}
/**
* btrfs_check_shared - tell us whether an extent is shared
*
* btrfs_check_shared uses the backref walking code but will short
* circuit as soon as it finds a root or inode that doesn't match the
* one passed in. This provides a significant performance benefit for
* callers (such as fiemap) which want to know whether the extent is
* shared but do not need a ref count.
*
Btrfs: do not start a transaction during fiemap During fiemap, for regular extents (non inline) we need to check if they are shared and if they are, set the shared bit. Checking if an extent is shared requires checking the delayed references of the currently running transaction, since some reference might have not yet hit the extent tree and be only in the in-memory delayed references. However we were using a transaction join for this, which creates a new transaction when there is no transaction currently running. That means that two more potential failures can happen: creating the transaction and committing it. Further, if no write activity is currently happening in the system, and fiemap calls keep being done, we end up creating and committing transactions that do nothing. In some extreme cases this can result in the commit of the transaction created by fiemap to fail with ENOSPC when updating the root item of a subvolume tree because a join does not reserve any space, leading to a trace like the following: heisenberg kernel: ------------[ cut here ]------------ heisenberg kernel: BTRFS: Transaction aborted (error -28) heisenberg kernel: WARNING: CPU: 0 PID: 7137 at fs/btrfs/root-tree.c:136 btrfs_update_root+0x22b/0x320 [btrfs] (...) heisenberg kernel: CPU: 0 PID: 7137 Comm: btrfs-transacti Not tainted 4.19.0-4-amd64 #1 Debian 4.19.28-2 heisenberg kernel: Hardware name: FUJITSU LIFEBOOK U757/FJNB2A5, BIOS Version 1.21 03/19/2018 heisenberg kernel: RIP: 0010:btrfs_update_root+0x22b/0x320 [btrfs] (...) heisenberg kernel: RSP: 0018:ffffb5448828bd40 EFLAGS: 00010286 heisenberg kernel: RAX: 0000000000000000 RBX: ffff8ed56bccef50 RCX: 0000000000000006 heisenberg kernel: RDX: 0000000000000007 RSI: 0000000000000092 RDI: ffff8ed6bda166a0 heisenberg kernel: RBP: 00000000ffffffe4 R08: 00000000000003df R09: 0000000000000007 heisenberg kernel: R10: 0000000000000000 R11: 0000000000000001 R12: ffff8ed63396a078 heisenberg kernel: R13: ffff8ed092d7c800 R14: ffff8ed64f5db028 R15: ffff8ed6bd03d068 heisenberg kernel: FS: 0000000000000000(0000) GS:ffff8ed6bda00000(0000) knlGS:0000000000000000 heisenberg kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 heisenberg kernel: CR2: 00007f46f75f8000 CR3: 0000000310a0a002 CR4: 00000000003606f0 heisenberg kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 heisenberg kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 heisenberg kernel: Call Trace: heisenberg kernel: commit_fs_roots+0x166/0x1d0 [btrfs] heisenberg kernel: ? _cond_resched+0x15/0x30 heisenberg kernel: ? btrfs_run_delayed_refs+0xac/0x180 [btrfs] heisenberg kernel: btrfs_commit_transaction+0x2bd/0x870 [btrfs] heisenberg kernel: ? start_transaction+0x9d/0x3f0 [btrfs] heisenberg kernel: transaction_kthread+0x147/0x180 [btrfs] heisenberg kernel: ? btrfs_cleanup_transaction+0x530/0x530 [btrfs] heisenberg kernel: kthread+0x112/0x130 heisenberg kernel: ? kthread_bind+0x30/0x30 heisenberg kernel: ret_from_fork+0x35/0x40 heisenberg kernel: ---[ end trace 05de912e30e012d9 ]--- Since fiemap (and btrfs_check_shared()) is a read-only operation, do not do a transaction join to avoid the overhead of creating a new transaction (if there is currently no running transaction) and introducing a potential point of failure when the new transaction gets committed, instead use a transaction attach to grab a handle for the currently running transaction if any. Reported-by: Christoph Anton Mitterer <calestyo@scientia.net> Link: https://lore.kernel.org/linux-btrfs/b2a668d7124f1d3e410367f587926f622b3f03a4.camel@scientia.net/ Fixes: afce772e87c36c ("btrfs: fix check_shared for fiemap ioctl") CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-04-15 21:50:51 +08:00
* This attempts to attach to the running transaction in order to account for
* delayed refs, but continues on even when no running transaction exists.
*
* Return: 0 if extent is not shared, 1 if it is shared, < 0 on error.
*/
int btrfs_check_shared(struct btrfs_root *root, u64 inum, u64 bytenr,
struct ulist *roots, struct ulist *tmp)
{
struct btrfs_fs_info *fs_info = root->fs_info;
struct btrfs_trans_handle *trans;
struct ulist_iterator uiter;
struct ulist_node *node;
struct seq_list elem = SEQ_LIST_INIT(elem);
int ret = 0;
struct share_check shared = {
.root_objectid = root->root_key.objectid,
.inum = inum,
.share_count = 0,
};
ulist_init(roots);
ulist_init(tmp);
Btrfs: fix deadlock between fiemap and transaction commits The fiemap handler locks a file range that can have unflushed delalloc, and after locking the range, it tries to attach to a running transaction. If the running transaction started its commit, that is, it is in state TRANS_STATE_COMMIT_START, and either the filesystem was mounted with the flushoncommit option or the transaction is creating a snapshot for the subvolume that contains the file that fiemap is operating on, we end up deadlocking. This happens because fiemap is blocked on the transaction, waiting for it to complete, and the transaction is waiting for the flushed dealloc to complete, which requires locking the file range that the fiemap task already locked. The following stack traces serve as an example of when this deadlock happens: (...) [404571.515510] Workqueue: btrfs-endio-write btrfs_endio_write_helper [btrfs] [404571.515956] Call Trace: [404571.516360] ? __schedule+0x3ae/0x7b0 [404571.516730] schedule+0x3a/0xb0 [404571.517104] lock_extent_bits+0x1ec/0x2a0 [btrfs] [404571.517465] ? remove_wait_queue+0x60/0x60 [404571.517832] btrfs_finish_ordered_io+0x292/0x800 [btrfs] [404571.518202] normal_work_helper+0xea/0x530 [btrfs] [404571.518566] process_one_work+0x21e/0x5c0 [404571.518990] worker_thread+0x4f/0x3b0 [404571.519413] ? process_one_work+0x5c0/0x5c0 [404571.519829] kthread+0x103/0x140 [404571.520191] ? kthread_create_worker_on_cpu+0x70/0x70 [404571.520565] ret_from_fork+0x3a/0x50 [404571.520915] kworker/u8:6 D 0 31651 2 0x80004000 [404571.521290] Workqueue: btrfs-flush_delalloc btrfs_flush_delalloc_helper [btrfs] (...) [404571.537000] fsstress D 0 13117 13115 0x00004000 [404571.537263] Call Trace: [404571.537524] ? __schedule+0x3ae/0x7b0 [404571.537788] schedule+0x3a/0xb0 [404571.538066] wait_current_trans+0xc8/0x100 [btrfs] [404571.538349] ? remove_wait_queue+0x60/0x60 [404571.538680] start_transaction+0x33c/0x500 [btrfs] [404571.539076] btrfs_check_shared+0xa3/0x1f0 [btrfs] [404571.539513] ? extent_fiemap+0x2ce/0x650 [btrfs] [404571.539866] extent_fiemap+0x2ce/0x650 [btrfs] [404571.540170] do_vfs_ioctl+0x526/0x6f0 [404571.540436] ksys_ioctl+0x70/0x80 [404571.540734] __x64_sys_ioctl+0x16/0x20 [404571.540997] do_syscall_64+0x60/0x1d0 [404571.541279] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) [404571.543729] btrfs D 0 14210 14208 0x00004000 [404571.544023] Call Trace: [404571.544275] ? __schedule+0x3ae/0x7b0 [404571.544526] ? wait_for_completion+0x112/0x1a0 [404571.544795] schedule+0x3a/0xb0 [404571.545064] schedule_timeout+0x1ff/0x390 [404571.545351] ? lock_acquire+0xa6/0x190 [404571.545638] ? wait_for_completion+0x49/0x1a0 [404571.545890] ? wait_for_completion+0x112/0x1a0 [404571.546228] wait_for_completion+0x131/0x1a0 [404571.546503] ? wake_up_q+0x70/0x70 [404571.546775] btrfs_wait_ordered_extents+0x27c/0x400 [btrfs] [404571.547159] btrfs_commit_transaction+0x3b0/0xae0 [btrfs] [404571.547449] ? btrfs_mksubvol+0x4a4/0x640 [btrfs] [404571.547703] ? remove_wait_queue+0x60/0x60 [404571.547969] btrfs_mksubvol+0x605/0x640 [btrfs] [404571.548226] ? __sb_start_write+0xd4/0x1c0 [404571.548512] ? mnt_want_write_file+0x24/0x50 [404571.548789] btrfs_ioctl_snap_create_transid+0x169/0x1a0 [btrfs] [404571.549048] btrfs_ioctl_snap_create_v2+0x11d/0x170 [btrfs] [404571.549307] btrfs_ioctl+0x133f/0x3150 [btrfs] [404571.549549] ? mem_cgroup_charge_statistics+0x4c/0xd0 [404571.549792] ? mem_cgroup_commit_charge+0x84/0x4b0 [404571.550064] ? __handle_mm_fault+0xe3e/0x11f0 [404571.550306] ? do_raw_spin_unlock+0x49/0xc0 [404571.550608] ? _raw_spin_unlock+0x24/0x30 [404571.550976] ? __handle_mm_fault+0xedf/0x11f0 [404571.551319] ? do_vfs_ioctl+0xa2/0x6f0 [404571.551659] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [404571.552087] do_vfs_ioctl+0xa2/0x6f0 [404571.552355] ksys_ioctl+0x70/0x80 [404571.552621] __x64_sys_ioctl+0x16/0x20 [404571.552864] do_syscall_64+0x60/0x1d0 [404571.553104] entry_SYSCALL_64_after_hwframe+0x49/0xbe (...) If we were joining the transaction instead of attaching to it, we would not risk a deadlock because a join only blocks if the transaction is in a state greater then or equals to TRANS_STATE_COMMIT_DOING, and the delalloc flush performed by a transaction is done before it reaches that state, when it is in the state TRANS_STATE_COMMIT_START. However a transaction join is intended for use cases where we do modify the filesystem, and fiemap only needs to peek at delayed references from the current transaction in order to determine if extents are shared, and, besides that, when there is no current transaction or when it blocks to wait for a current committing transaction to complete, it creates a new transaction without reserving any space. Such unnecessary transactions, besides doing unnecessary IO, can cause transaction aborts (-ENOSPC) and unnecessary rotation of the precious backup roots. So fix this by adding a new transaction join variant, named join_nostart, which behaves like the regular join, but it does not create a transaction when none currently exists or after waiting for a committing transaction to complete. Fixes: 03628cdbc64db6 ("Btrfs: do not start a transaction during fiemap") Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-07-29 16:37:10 +08:00
trans = btrfs_join_transaction_nostart(root);
if (IS_ERR(trans)) {
Btrfs: do not start a transaction during fiemap During fiemap, for regular extents (non inline) we need to check if they are shared and if they are, set the shared bit. Checking if an extent is shared requires checking the delayed references of the currently running transaction, since some reference might have not yet hit the extent tree and be only in the in-memory delayed references. However we were using a transaction join for this, which creates a new transaction when there is no transaction currently running. That means that two more potential failures can happen: creating the transaction and committing it. Further, if no write activity is currently happening in the system, and fiemap calls keep being done, we end up creating and committing transactions that do nothing. In some extreme cases this can result in the commit of the transaction created by fiemap to fail with ENOSPC when updating the root item of a subvolume tree because a join does not reserve any space, leading to a trace like the following: heisenberg kernel: ------------[ cut here ]------------ heisenberg kernel: BTRFS: Transaction aborted (error -28) heisenberg kernel: WARNING: CPU: 0 PID: 7137 at fs/btrfs/root-tree.c:136 btrfs_update_root+0x22b/0x320 [btrfs] (...) heisenberg kernel: CPU: 0 PID: 7137 Comm: btrfs-transacti Not tainted 4.19.0-4-amd64 #1 Debian 4.19.28-2 heisenberg kernel: Hardware name: FUJITSU LIFEBOOK U757/FJNB2A5, BIOS Version 1.21 03/19/2018 heisenberg kernel: RIP: 0010:btrfs_update_root+0x22b/0x320 [btrfs] (...) heisenberg kernel: RSP: 0018:ffffb5448828bd40 EFLAGS: 00010286 heisenberg kernel: RAX: 0000000000000000 RBX: ffff8ed56bccef50 RCX: 0000000000000006 heisenberg kernel: RDX: 0000000000000007 RSI: 0000000000000092 RDI: ffff8ed6bda166a0 heisenberg kernel: RBP: 00000000ffffffe4 R08: 00000000000003df R09: 0000000000000007 heisenberg kernel: R10: 0000000000000000 R11: 0000000000000001 R12: ffff8ed63396a078 heisenberg kernel: R13: ffff8ed092d7c800 R14: ffff8ed64f5db028 R15: ffff8ed6bd03d068 heisenberg kernel: FS: 0000000000000000(0000) GS:ffff8ed6bda00000(0000) knlGS:0000000000000000 heisenberg kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 heisenberg kernel: CR2: 00007f46f75f8000 CR3: 0000000310a0a002 CR4: 00000000003606f0 heisenberg kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 heisenberg kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 heisenberg kernel: Call Trace: heisenberg kernel: commit_fs_roots+0x166/0x1d0 [btrfs] heisenberg kernel: ? _cond_resched+0x15/0x30 heisenberg kernel: ? btrfs_run_delayed_refs+0xac/0x180 [btrfs] heisenberg kernel: btrfs_commit_transaction+0x2bd/0x870 [btrfs] heisenberg kernel: ? start_transaction+0x9d/0x3f0 [btrfs] heisenberg kernel: transaction_kthread+0x147/0x180 [btrfs] heisenberg kernel: ? btrfs_cleanup_transaction+0x530/0x530 [btrfs] heisenberg kernel: kthread+0x112/0x130 heisenberg kernel: ? kthread_bind+0x30/0x30 heisenberg kernel: ret_from_fork+0x35/0x40 heisenberg kernel: ---[ end trace 05de912e30e012d9 ]--- Since fiemap (and btrfs_check_shared()) is a read-only operation, do not do a transaction join to avoid the overhead of creating a new transaction (if there is currently no running transaction) and introducing a potential point of failure when the new transaction gets committed, instead use a transaction attach to grab a handle for the currently running transaction if any. Reported-by: Christoph Anton Mitterer <calestyo@scientia.net> Link: https://lore.kernel.org/linux-btrfs/b2a668d7124f1d3e410367f587926f622b3f03a4.camel@scientia.net/ Fixes: afce772e87c36c ("btrfs: fix check_shared for fiemap ioctl") CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-04-15 21:50:51 +08:00
if (PTR_ERR(trans) != -ENOENT && PTR_ERR(trans) != -EROFS) {
ret = PTR_ERR(trans);
goto out;
}
trans = NULL;
down_read(&fs_info->commit_root_sem);
} else {
btrfs_get_tree_mod_seq(fs_info, &elem);
}
ULIST_ITER_INIT(&uiter);
while (1) {
ret = find_parent_nodes(trans, fs_info, bytenr, elem.seq, tmp,
btrfs: add a flag to iterate_inodes_from_logical to find all extent refs for uncompressed extents The LOGICAL_INO ioctl provides a backward mapping from extent bytenr and offset (encoded as a single logical address) to a list of extent refs. LOGICAL_INO complements TREE_SEARCH, which provides the forward mapping (extent ref -> extent bytenr and offset, or logical address). These are useful capabilities for programs that manipulate extents and extent references from userspace (e.g. dedup and defrag utilities). When the extents are uncompressed (and not encrypted and not other), check_extent_in_eb performs filtering of the extent refs to remove any extent refs which do not contain the same extent offset as the 'logical' parameter's extent offset. This prevents LOGICAL_INO from returning references to more than a single block. To find the set of extent references to an uncompressed extent from [a, b), userspace has to run a loop like this pseudocode: for (i = a; i < b; ++i) extent_ref_set += LOGICAL_INO(i); At each iteration of the loop (up to 32768 iterations for a 128M extent), data we are interested in is collected in the kernel, then deleted by the filter in check_extent_in_eb. When the extents are compressed (or encrypted or other), the 'logical' parameter must be an extent bytenr (the 'a' parameter in the loop). No filtering by extent offset is done (or possible?) so the result is the complete set of extent refs for the entire extent. This removes the need for the loop, since we get all the extent refs in one call. Add an 'ignore_offset' argument to iterate_inodes_from_logical, [...several levels of function call graph...], and check_extent_in_eb, so that we can disable the extent offset filtering for uncompressed extents. This flag can be set by an improved version of the LOGICAL_INO ioctl to get either behavior as desired. There is no functional change in this patch. The new flag is always false. Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Reviewed-by: David Sterba <dsterba@suse.com> [ minor coding style fixes ] Signed-off-by: David Sterba <dsterba@suse.com>
2017-09-23 01:58:45 +08:00
roots, NULL, &shared, false);
if (ret == BACKREF_FOUND_SHARED) {
/* this is the only condition under which we return 1 */
ret = 1;
break;
}
if (ret < 0 && ret != -ENOENT)
break;
ret = 0;
node = ulist_next(tmp, &uiter);
if (!node)
break;
bytenr = node->val;
btrfs: add missing initialization in btrfs_check_shared This patch addresses an issue that causes fiemap to falsely report a shared extent. The test case is as follows: xfs_io -f -d -c "pwrite -b 16k 0 64k" -c "fiemap -v" /media/scratch/file5 sync xfs_io -c "fiemap -v" /media/scratch/file5 which gives the resulting output: wrote 65536/65536 bytes at offset 0 64 KiB, 4 ops; 0.0000 sec (121.359 MiB/sec and 7766.9903 ops/sec) /media/scratch/file5: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..127]: 24576..24703 128 0x2001 /media/scratch/file5: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..127]: 24576..24703 128 0x1 This is because btrfs_check_shared calls find_parent_nodes repeatedly in a loop, passing a share_check struct to report the count of shared extent. But btrfs_check_shared does not re-initialize the count value to zero for subsequent calls from the loop, resulting in a false share count value. This is a regressive behavior from 4.13. With proper re-initialization the test result is as follows: wrote 65536/65536 bytes at offset 0 64 KiB, 4 ops; 0.0000 sec (110.035 MiB/sec and 7042.2535 ops/sec) /media/scratch/file5: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..127]: 24576..24703 128 0x1 /media/scratch/file5: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..127]: 24576..24703 128 0x1 which corrects the regression. Fixes: 3ec4d3238ab ("btrfs: allow backref search checks for shared extents") Signed-off-by: Edmund Nadolski <enadolski@suse.com> [ add text from cover letter to changelog ] Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-14 23:03:11 +08:00
shared.share_count = 0;
cond_resched();
}
if (trans) {
btrfs_put_tree_mod_seq(fs_info, &elem);
btrfs_end_transaction(trans);
} else {
up_read(&fs_info->commit_root_sem);
}
Btrfs: do not start a transaction during fiemap During fiemap, for regular extents (non inline) we need to check if they are shared and if they are, set the shared bit. Checking if an extent is shared requires checking the delayed references of the currently running transaction, since some reference might have not yet hit the extent tree and be only in the in-memory delayed references. However we were using a transaction join for this, which creates a new transaction when there is no transaction currently running. That means that two more potential failures can happen: creating the transaction and committing it. Further, if no write activity is currently happening in the system, and fiemap calls keep being done, we end up creating and committing transactions that do nothing. In some extreme cases this can result in the commit of the transaction created by fiemap to fail with ENOSPC when updating the root item of a subvolume tree because a join does not reserve any space, leading to a trace like the following: heisenberg kernel: ------------[ cut here ]------------ heisenberg kernel: BTRFS: Transaction aborted (error -28) heisenberg kernel: WARNING: CPU: 0 PID: 7137 at fs/btrfs/root-tree.c:136 btrfs_update_root+0x22b/0x320 [btrfs] (...) heisenberg kernel: CPU: 0 PID: 7137 Comm: btrfs-transacti Not tainted 4.19.0-4-amd64 #1 Debian 4.19.28-2 heisenberg kernel: Hardware name: FUJITSU LIFEBOOK U757/FJNB2A5, BIOS Version 1.21 03/19/2018 heisenberg kernel: RIP: 0010:btrfs_update_root+0x22b/0x320 [btrfs] (...) heisenberg kernel: RSP: 0018:ffffb5448828bd40 EFLAGS: 00010286 heisenberg kernel: RAX: 0000000000000000 RBX: ffff8ed56bccef50 RCX: 0000000000000006 heisenberg kernel: RDX: 0000000000000007 RSI: 0000000000000092 RDI: ffff8ed6bda166a0 heisenberg kernel: RBP: 00000000ffffffe4 R08: 00000000000003df R09: 0000000000000007 heisenberg kernel: R10: 0000000000000000 R11: 0000000000000001 R12: ffff8ed63396a078 heisenberg kernel: R13: ffff8ed092d7c800 R14: ffff8ed64f5db028 R15: ffff8ed6bd03d068 heisenberg kernel: FS: 0000000000000000(0000) GS:ffff8ed6bda00000(0000) knlGS:0000000000000000 heisenberg kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 heisenberg kernel: CR2: 00007f46f75f8000 CR3: 0000000310a0a002 CR4: 00000000003606f0 heisenberg kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 heisenberg kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 heisenberg kernel: Call Trace: heisenberg kernel: commit_fs_roots+0x166/0x1d0 [btrfs] heisenberg kernel: ? _cond_resched+0x15/0x30 heisenberg kernel: ? btrfs_run_delayed_refs+0xac/0x180 [btrfs] heisenberg kernel: btrfs_commit_transaction+0x2bd/0x870 [btrfs] heisenberg kernel: ? start_transaction+0x9d/0x3f0 [btrfs] heisenberg kernel: transaction_kthread+0x147/0x180 [btrfs] heisenberg kernel: ? btrfs_cleanup_transaction+0x530/0x530 [btrfs] heisenberg kernel: kthread+0x112/0x130 heisenberg kernel: ? kthread_bind+0x30/0x30 heisenberg kernel: ret_from_fork+0x35/0x40 heisenberg kernel: ---[ end trace 05de912e30e012d9 ]--- Since fiemap (and btrfs_check_shared()) is a read-only operation, do not do a transaction join to avoid the overhead of creating a new transaction (if there is currently no running transaction) and introducing a potential point of failure when the new transaction gets committed, instead use a transaction attach to grab a handle for the currently running transaction if any. Reported-by: Christoph Anton Mitterer <calestyo@scientia.net> Link: https://lore.kernel.org/linux-btrfs/b2a668d7124f1d3e410367f587926f622b3f03a4.camel@scientia.net/ Fixes: afce772e87c36c ("btrfs: fix check_shared for fiemap ioctl") CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-04-15 21:50:51 +08:00
out:
ulist_release(roots);
ulist_release(tmp);
return ret;
}
int btrfs_find_one_extref(struct btrfs_root *root, u64 inode_objectid,
u64 start_off, struct btrfs_path *path,
struct btrfs_inode_extref **ret_extref,
u64 *found_off)
{
int ret, slot;
struct btrfs_key key;
struct btrfs_key found_key;
struct btrfs_inode_extref *extref;
const struct extent_buffer *leaf;
unsigned long ptr;
key.objectid = inode_objectid;
key.type = BTRFS_INODE_EXTREF_KEY;
key.offset = start_off;
ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
if (ret < 0)
return ret;
while (1) {
leaf = path->nodes[0];
slot = path->slots[0];
if (slot >= btrfs_header_nritems(leaf)) {
/*
* If the item at offset is not found,
* btrfs_search_slot will point us to the slot
* where it should be inserted. In our case
* that will be the slot directly before the
* next INODE_REF_KEY_V2 item. In the case
* that we're pointing to the last slot in a
* leaf, we must move one leaf over.
*/
ret = btrfs_next_leaf(root, path);
if (ret) {
if (ret >= 1)
ret = -ENOENT;
break;
}
continue;
}
btrfs_item_key_to_cpu(leaf, &found_key, slot);
/*
* Check that we're still looking at an extended ref key for
* this particular objectid. If we have different
* objectid or type then there are no more to be found
* in the tree and we can exit.
*/
ret = -ENOENT;
if (found_key.objectid != inode_objectid)
break;
if (found_key.type != BTRFS_INODE_EXTREF_KEY)
break;
ret = 0;
ptr = btrfs_item_ptr_offset(leaf, path->slots[0]);
extref = (struct btrfs_inode_extref *)ptr;
*ret_extref = extref;
if (found_off)
*found_off = found_key.offset;
break;
}
return ret;
}
/*
* this iterates to turn a name (from iref/extref) into a full filesystem path.
* Elements of the path are separated by '/' and the path is guaranteed to be
* 0-terminated. the path is only given within the current file system.
* Therefore, it never starts with a '/'. the caller is responsible to provide
* "size" bytes in "dest". the dest buffer will be filled backwards. finally,
* the start point of the resulting string is returned. this pointer is within
* dest, normally.
* in case the path buffer would overflow, the pointer is decremented further
* as if output was written to the buffer, though no more output is actually
* generated. that way, the caller can determine how much space would be
* required for the path to fit into the buffer. in that case, the returned
* value will be smaller than dest. callers must check this!
*/
char *btrfs_ref_to_path(struct btrfs_root *fs_root, struct btrfs_path *path,
u32 name_len, unsigned long name_off,
struct extent_buffer *eb_in, u64 parent,
char *dest, u32 size)
{
int slot;
u64 next_inum;
int ret;
s64 bytes_left = ((s64)size) - 1;
struct extent_buffer *eb = eb_in;
struct btrfs_key found_key;
int leave_spinning = path->leave_spinning;
struct btrfs_inode_ref *iref;
if (bytes_left >= 0)
dest[bytes_left] = '\0';
path->leave_spinning = 1;
while (1) {
bytes_left -= name_len;
if (bytes_left >= 0)
read_extent_buffer(eb, dest + bytes_left,
name_off, name_len);
if (eb != eb_in) {
Btrfs: fix hang on extent buffer lock caused by the inode_paths ioctl While doing some tests I ran into an hang on an extent buffer's rwlock that produced the following trace: [39389.800012] NMI watchdog: BUG: soft lockup - CPU#15 stuck for 22s! [fdm-stress:32166] [39389.800016] NMI watchdog: BUG: soft lockup - CPU#14 stuck for 22s! [fdm-stress:32165] [39389.800016] Modules linked in: btrfs dm_mod ppdev xor sha256_generic hmac raid6_pq drbg ansi_cprng aesni_intel i2c_piix4 acpi_cpufreq aes_x86_64 ablk_helper tpm_tis parport_pc i2c_core sg cryptd evdev psmouse lrw tpm parport gf128mul serio_raw pcspkr glue_helper processor button loop autofs4 ext4 crc16 mbcache jbd2 sd_mod sr_mod cdrom ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring crc32c_intel scsi_mod e1000 virtio floppy [last unloaded: btrfs] [39389.800016] irq event stamp: 0 [39389.800016] hardirqs last enabled at (0): [< (null)>] (null) [39389.800016] hardirqs last disabled at (0): [<ffffffff8104e58d>] copy_process+0x638/0x1a35 [39389.800016] softirqs last enabled at (0): [<ffffffff8104e58d>] copy_process+0x638/0x1a35 [39389.800016] softirqs last disabled at (0): [< (null)>] (null) [39389.800016] CPU: 14 PID: 32165 Comm: fdm-stress Not tainted 4.4.0-rc6-btrfs-next-18+ #1 [39389.800016] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014 [39389.800016] task: ffff880175b1ca40 ti: ffff8800a185c000 task.ti: ffff8800a185c000 [39389.800016] RIP: 0010:[<ffffffff810902af>] [<ffffffff810902af>] queued_spin_lock_slowpath+0x57/0x158 [39389.800016] RSP: 0018:ffff8800a185fb80 EFLAGS: 00000202 [39389.800016] RAX: 0000000000000101 RBX: ffff8801710c4e9c RCX: 0000000000000101 [39389.800016] RDX: 0000000000000100 RSI: 0000000000000001 RDI: 0000000000000001 [39389.800016] RBP: ffff8800a185fb98 R08: 0000000000000001 R09: 0000000000000000 [39389.800016] R10: ffff8800a185fb68 R11: 6db6db6db6db6db7 R12: ffff8801710c4e98 [39389.800016] R13: ffff880175b1ca40 R14: ffff8800a185fc10 R15: ffff880175b1ca40 [39389.800016] FS: 00007f6d37fff700(0000) GS:ffff8802be9c0000(0000) knlGS:0000000000000000 [39389.800016] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [39389.800016] CR2: 00007f6d300019b8 CR3: 0000000037c93000 CR4: 00000000001406e0 [39389.800016] Stack: [39389.800016] ffff8801710c4e98 ffff8801710c4e98 ffff880175b1ca40 ffff8800a185fbb0 [39389.800016] ffffffff81091e11 ffff8801710c4e98 ffff8800a185fbc8 ffffffff81091895 [39389.800016] ffff8801710c4e98 ffff8800a185fbe8 ffffffff81486c5c ffffffffa067288c [39389.800016] Call Trace: [39389.800016] [<ffffffff81091e11>] queued_read_lock_slowpath+0x46/0x60 [39389.800016] [<ffffffff81091895>] do_raw_read_lock+0x3e/0x41 [39389.800016] [<ffffffff81486c5c>] _raw_read_lock+0x3d/0x44 [39389.800016] [<ffffffffa067288c>] ? btrfs_tree_read_lock+0x54/0x125 [btrfs] [39389.800016] [<ffffffffa067288c>] btrfs_tree_read_lock+0x54/0x125 [btrfs] [39389.800016] [<ffffffffa0622ced>] ? btrfs_find_item+0xa7/0xd2 [btrfs] [39389.800016] [<ffffffffa069363f>] btrfs_ref_to_path+0xd6/0x174 [btrfs] [39389.800016] [<ffffffffa0693730>] inode_to_path+0x53/0xa2 [btrfs] [39389.800016] [<ffffffffa0693e2e>] paths_from_inode+0x117/0x2ec [btrfs] [39389.800016] [<ffffffffa0670cff>] btrfs_ioctl+0xd5b/0x2793 [btrfs] [39389.800016] [<ffffffff8108a8b0>] ? arch_local_irq_save+0x9/0xc [39389.800016] [<ffffffff81276727>] ? __this_cpu_preempt_check+0x13/0x15 [39389.800016] [<ffffffff8108a8b0>] ? arch_local_irq_save+0x9/0xc [39389.800016] [<ffffffff8118b3d4>] ? rcu_read_unlock+0x3e/0x5d [39389.800016] [<ffffffff811822f8>] do_vfs_ioctl+0x42b/0x4ea [39389.800016] [<ffffffff8118b4f3>] ? __fget_light+0x62/0x71 [39389.800016] [<ffffffff8118240e>] SyS_ioctl+0x57/0x79 [39389.800016] [<ffffffff814872d7>] entry_SYSCALL_64_fastpath+0x12/0x6f [39389.800016] Code: b9 01 01 00 00 f7 c6 00 ff ff ff 75 32 83 fe 01 89 ca 89 f0 0f 45 d7 f0 0f b1 13 39 f0 74 04 89 c6 eb e2 ff ca 0f 84 fa 00 00 00 <8b> 03 84 c0 74 04 f3 90 eb f6 66 c7 03 01 00 e9 e6 00 00 00 e8 [39389.800012] Modules linked in: btrfs dm_mod ppdev xor sha256_generic hmac raid6_pq drbg ansi_cprng aesni_intel i2c_piix4 acpi_cpufreq aes_x86_64 ablk_helper tpm_tis parport_pc i2c_core sg cryptd evdev psmouse lrw tpm parport gf128mul serio_raw pcspkr glue_helper processor button loop autofs4 ext4 crc16 mbcache jbd2 sd_mod sr_mod cdrom ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring crc32c_intel scsi_mod e1000 virtio floppy [last unloaded: btrfs] [39389.800012] irq event stamp: 0 [39389.800012] hardirqs last enabled at (0): [< (null)>] (null) [39389.800012] hardirqs last disabled at (0): [<ffffffff8104e58d>] copy_process+0x638/0x1a35 [39389.800012] softirqs last enabled at (0): [<ffffffff8104e58d>] copy_process+0x638/0x1a35 [39389.800012] softirqs last disabled at (0): [< (null)>] (null) [39389.800012] CPU: 15 PID: 32166 Comm: fdm-stress Tainted: G L 4.4.0-rc6-btrfs-next-18+ #1 [39389.800012] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014 [39389.800012] task: ffff880179294380 ti: ffff880034a60000 task.ti: ffff880034a60000 [39389.800012] RIP: 0010:[<ffffffff81091e8d>] [<ffffffff81091e8d>] queued_write_lock_slowpath+0x62/0x72 [39389.800012] RSP: 0018:ffff880034a639f0 EFLAGS: 00000206 [39389.800012] RAX: 0000000000000101 RBX: ffff8801710c4e98 RCX: 0000000000000000 [39389.800012] RDX: 00000000000000ff RSI: 0000000000000000 RDI: ffff8801710c4e9c [39389.800012] RBP: ffff880034a639f8 R08: 0000000000000001 R09: 0000000000000000 [39389.800012] R10: ffff880034a639b0 R11: 0000000000001000 R12: ffff8801710c4e98 [39389.800012] R13: 0000000000000001 R14: ffff880172cbc000 R15: ffff8801710c4e00 [39389.800012] FS: 00007f6d377fe700(0000) GS:ffff8802be9e0000(0000) knlGS:0000000000000000 [39389.800012] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [39389.800012] CR2: 00007f6d3d3c1000 CR3: 0000000037c93000 CR4: 00000000001406e0 [39389.800012] Stack: [39389.800012] ffff8801710c4e98 ffff880034a63a10 ffffffff81091963 ffff8801710c4e98 [39389.800012] ffff880034a63a30 ffffffff81486f1b ffffffffa0672cb3 ffff8801710c4e00 [39389.800012] ffff880034a63a78 ffffffffa0672cb3 ffff8801710c4e00 ffff880034a63a58 [39389.800012] Call Trace: [39389.800012] [<ffffffff81091963>] do_raw_write_lock+0x72/0x8c [39389.800012] [<ffffffff81486f1b>] _raw_write_lock+0x3a/0x41 [39389.800012] [<ffffffffa0672cb3>] ? btrfs_tree_lock+0x119/0x251 [btrfs] [39389.800012] [<ffffffffa0672cb3>] btrfs_tree_lock+0x119/0x251 [btrfs] [39389.800012] [<ffffffffa061aeba>] ? rcu_read_unlock+0x5b/0x5d [btrfs] [39389.800012] [<ffffffffa061ce13>] ? btrfs_root_node+0xda/0xe6 [btrfs] [39389.800012] [<ffffffffa061ce83>] btrfs_lock_root_node+0x22/0x42 [btrfs] [39389.800012] [<ffffffffa062046b>] btrfs_search_slot+0x1b8/0x758 [btrfs] [39389.800012] [<ffffffff810fc6b0>] ? time_hardirqs_on+0x15/0x28 [39389.800012] [<ffffffffa06365db>] btrfs_lookup_inode+0x31/0x95 [btrfs] [39389.800012] [<ffffffff8108d62f>] ? trace_hardirqs_on+0xd/0xf [39389.800012] [<ffffffff8148482b>] ? mutex_lock_nested+0x397/0x3bc [39389.800012] [<ffffffffa068821b>] __btrfs_update_delayed_inode+0x59/0x1c0 [btrfs] [39389.800012] [<ffffffffa068858e>] __btrfs_commit_inode_delayed_items+0x194/0x5aa [btrfs] [39389.800012] [<ffffffff81486ab7>] ? _raw_spin_unlock+0x31/0x44 [39389.800012] [<ffffffffa0688a48>] __btrfs_run_delayed_items+0xa4/0x15c [btrfs] [39389.800012] [<ffffffffa0688d62>] btrfs_run_delayed_items+0x11/0x13 [btrfs] [39389.800012] [<ffffffffa064048e>] btrfs_commit_transaction+0x234/0x96e [btrfs] [39389.800012] [<ffffffffa0618d10>] btrfs_sync_fs+0x145/0x1ad [btrfs] [39389.800012] [<ffffffffa0671176>] btrfs_ioctl+0x11d2/0x2793 [btrfs] [39389.800012] [<ffffffff8108a8b0>] ? arch_local_irq_save+0x9/0xc [39389.800012] [<ffffffff81140261>] ? __might_fault+0x4c/0xa7 [39389.800012] [<ffffffff81140261>] ? __might_fault+0x4c/0xa7 [39389.800012] [<ffffffff8108a8b0>] ? arch_local_irq_save+0x9/0xc [39389.800012] [<ffffffff8118b3d4>] ? rcu_read_unlock+0x3e/0x5d [39389.800012] [<ffffffff811822f8>] do_vfs_ioctl+0x42b/0x4ea [39389.800012] [<ffffffff8118b4f3>] ? __fget_light+0x62/0x71 [39389.800012] [<ffffffff8118240e>] SyS_ioctl+0x57/0x79 [39389.800012] [<ffffffff814872d7>] entry_SYSCALL_64_fastpath+0x12/0x6f [39389.800012] Code: f0 0f b1 13 85 c0 75 ef eb 2a f3 90 8a 03 84 c0 75 f8 f0 0f b0 13 84 c0 75 f0 ba ff 00 00 00 eb 0a f0 0f b1 13 ff c8 74 0b f3 90 <8b> 03 83 f8 01 75 f7 eb ed c6 43 04 00 5b 5d c3 0f 1f 44 00 00 This happens because in the code path executed by the inode_paths ioctl we end up nesting two calls to read lock a leaf's rwlock when after the first call to read_lock() and before the second call to read_lock(), another task (running the delayed items as part of a transaction commit) has already called write_lock() against the leaf's rwlock. This situation is illustrated by the following diagram: Task A Task B btrfs_ref_to_path() btrfs_commit_transaction() read_lock(&eb->lock); btrfs_run_delayed_items() __btrfs_commit_inode_delayed_items() __btrfs_update_delayed_inode() btrfs_lookup_inode() write_lock(&eb->lock); --> task waits for lock read_lock(&eb->lock); --> makes this task hang forever (and task B too of course) So fix this by avoiding doing the nested read lock, which is easily avoidable. This issue does not happen if task B calls write_lock() after task A does the second call to read_lock(), however there does not seem to exist anything in the documentation that mentions what is the expected behaviour for recursive locking of rwlocks (leaving the idea that doing so is not a good usage of rwlocks). Also, as a side effect necessary for this fix, make sure we do not needlessly read lock extent buffers when the input path has skip_locking set (used when called from send). Cc: stable@vger.kernel.org Signed-off-by: Filipe Manana <fdmanana@suse.com>
2016-02-04 03:17:27 +08:00
if (!path->skip_locking)
btrfs_tree_read_unlock_blocking(eb);
free_extent_buffer(eb);
}
ret = btrfs_find_item(fs_root, path, parent, 0,
BTRFS_INODE_REF_KEY, &found_key);
if (ret > 0)
ret = -ENOENT;
if (ret)
break;
next_inum = found_key.offset;
/* regular exit ahead */
if (parent == next_inum)
break;
slot = path->slots[0];
eb = path->nodes[0];
/* make sure we can use eb after releasing the path */
if (eb != eb_in) {
Btrfs: fix hang on extent buffer lock caused by the inode_paths ioctl While doing some tests I ran into an hang on an extent buffer's rwlock that produced the following trace: [39389.800012] NMI watchdog: BUG: soft lockup - CPU#15 stuck for 22s! [fdm-stress:32166] [39389.800016] NMI watchdog: BUG: soft lockup - CPU#14 stuck for 22s! [fdm-stress:32165] [39389.800016] Modules linked in: btrfs dm_mod ppdev xor sha256_generic hmac raid6_pq drbg ansi_cprng aesni_intel i2c_piix4 acpi_cpufreq aes_x86_64 ablk_helper tpm_tis parport_pc i2c_core sg cryptd evdev psmouse lrw tpm parport gf128mul serio_raw pcspkr glue_helper processor button loop autofs4 ext4 crc16 mbcache jbd2 sd_mod sr_mod cdrom ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring crc32c_intel scsi_mod e1000 virtio floppy [last unloaded: btrfs] [39389.800016] irq event stamp: 0 [39389.800016] hardirqs last enabled at (0): [< (null)>] (null) [39389.800016] hardirqs last disabled at (0): [<ffffffff8104e58d>] copy_process+0x638/0x1a35 [39389.800016] softirqs last enabled at (0): [<ffffffff8104e58d>] copy_process+0x638/0x1a35 [39389.800016] softirqs last disabled at (0): [< (null)>] (null) [39389.800016] CPU: 14 PID: 32165 Comm: fdm-stress Not tainted 4.4.0-rc6-btrfs-next-18+ #1 [39389.800016] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014 [39389.800016] task: ffff880175b1ca40 ti: ffff8800a185c000 task.ti: ffff8800a185c000 [39389.800016] RIP: 0010:[<ffffffff810902af>] [<ffffffff810902af>] queued_spin_lock_slowpath+0x57/0x158 [39389.800016] RSP: 0018:ffff8800a185fb80 EFLAGS: 00000202 [39389.800016] RAX: 0000000000000101 RBX: ffff8801710c4e9c RCX: 0000000000000101 [39389.800016] RDX: 0000000000000100 RSI: 0000000000000001 RDI: 0000000000000001 [39389.800016] RBP: ffff8800a185fb98 R08: 0000000000000001 R09: 0000000000000000 [39389.800016] R10: ffff8800a185fb68 R11: 6db6db6db6db6db7 R12: ffff8801710c4e98 [39389.800016] R13: ffff880175b1ca40 R14: ffff8800a185fc10 R15: ffff880175b1ca40 [39389.800016] FS: 00007f6d37fff700(0000) GS:ffff8802be9c0000(0000) knlGS:0000000000000000 [39389.800016] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [39389.800016] CR2: 00007f6d300019b8 CR3: 0000000037c93000 CR4: 00000000001406e0 [39389.800016] Stack: [39389.800016] ffff8801710c4e98 ffff8801710c4e98 ffff880175b1ca40 ffff8800a185fbb0 [39389.800016] ffffffff81091e11 ffff8801710c4e98 ffff8800a185fbc8 ffffffff81091895 [39389.800016] ffff8801710c4e98 ffff8800a185fbe8 ffffffff81486c5c ffffffffa067288c [39389.800016] Call Trace: [39389.800016] [<ffffffff81091e11>] queued_read_lock_slowpath+0x46/0x60 [39389.800016] [<ffffffff81091895>] do_raw_read_lock+0x3e/0x41 [39389.800016] [<ffffffff81486c5c>] _raw_read_lock+0x3d/0x44 [39389.800016] [<ffffffffa067288c>] ? btrfs_tree_read_lock+0x54/0x125 [btrfs] [39389.800016] [<ffffffffa067288c>] btrfs_tree_read_lock+0x54/0x125 [btrfs] [39389.800016] [<ffffffffa0622ced>] ? btrfs_find_item+0xa7/0xd2 [btrfs] [39389.800016] [<ffffffffa069363f>] btrfs_ref_to_path+0xd6/0x174 [btrfs] [39389.800016] [<ffffffffa0693730>] inode_to_path+0x53/0xa2 [btrfs] [39389.800016] [<ffffffffa0693e2e>] paths_from_inode+0x117/0x2ec [btrfs] [39389.800016] [<ffffffffa0670cff>] btrfs_ioctl+0xd5b/0x2793 [btrfs] [39389.800016] [<ffffffff8108a8b0>] ? arch_local_irq_save+0x9/0xc [39389.800016] [<ffffffff81276727>] ? __this_cpu_preempt_check+0x13/0x15 [39389.800016] [<ffffffff8108a8b0>] ? arch_local_irq_save+0x9/0xc [39389.800016] [<ffffffff8118b3d4>] ? rcu_read_unlock+0x3e/0x5d [39389.800016] [<ffffffff811822f8>] do_vfs_ioctl+0x42b/0x4ea [39389.800016] [<ffffffff8118b4f3>] ? __fget_light+0x62/0x71 [39389.800016] [<ffffffff8118240e>] SyS_ioctl+0x57/0x79 [39389.800016] [<ffffffff814872d7>] entry_SYSCALL_64_fastpath+0x12/0x6f [39389.800016] Code: b9 01 01 00 00 f7 c6 00 ff ff ff 75 32 83 fe 01 89 ca 89 f0 0f 45 d7 f0 0f b1 13 39 f0 74 04 89 c6 eb e2 ff ca 0f 84 fa 00 00 00 <8b> 03 84 c0 74 04 f3 90 eb f6 66 c7 03 01 00 e9 e6 00 00 00 e8 [39389.800012] Modules linked in: btrfs dm_mod ppdev xor sha256_generic hmac raid6_pq drbg ansi_cprng aesni_intel i2c_piix4 acpi_cpufreq aes_x86_64 ablk_helper tpm_tis parport_pc i2c_core sg cryptd evdev psmouse lrw tpm parport gf128mul serio_raw pcspkr glue_helper processor button loop autofs4 ext4 crc16 mbcache jbd2 sd_mod sr_mod cdrom ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring crc32c_intel scsi_mod e1000 virtio floppy [last unloaded: btrfs] [39389.800012] irq event stamp: 0 [39389.800012] hardirqs last enabled at (0): [< (null)>] (null) [39389.800012] hardirqs last disabled at (0): [<ffffffff8104e58d>] copy_process+0x638/0x1a35 [39389.800012] softirqs last enabled at (0): [<ffffffff8104e58d>] copy_process+0x638/0x1a35 [39389.800012] softirqs last disabled at (0): [< (null)>] (null) [39389.800012] CPU: 15 PID: 32166 Comm: fdm-stress Tainted: G L 4.4.0-rc6-btrfs-next-18+ #1 [39389.800012] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014 [39389.800012] task: ffff880179294380 ti: ffff880034a60000 task.ti: ffff880034a60000 [39389.800012] RIP: 0010:[<ffffffff81091e8d>] [<ffffffff81091e8d>] queued_write_lock_slowpath+0x62/0x72 [39389.800012] RSP: 0018:ffff880034a639f0 EFLAGS: 00000206 [39389.800012] RAX: 0000000000000101 RBX: ffff8801710c4e98 RCX: 0000000000000000 [39389.800012] RDX: 00000000000000ff RSI: 0000000000000000 RDI: ffff8801710c4e9c [39389.800012] RBP: ffff880034a639f8 R08: 0000000000000001 R09: 0000000000000000 [39389.800012] R10: ffff880034a639b0 R11: 0000000000001000 R12: ffff8801710c4e98 [39389.800012] R13: 0000000000000001 R14: ffff880172cbc000 R15: ffff8801710c4e00 [39389.800012] FS: 00007f6d377fe700(0000) GS:ffff8802be9e0000(0000) knlGS:0000000000000000 [39389.800012] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [39389.800012] CR2: 00007f6d3d3c1000 CR3: 0000000037c93000 CR4: 00000000001406e0 [39389.800012] Stack: [39389.800012] ffff8801710c4e98 ffff880034a63a10 ffffffff81091963 ffff8801710c4e98 [39389.800012] ffff880034a63a30 ffffffff81486f1b ffffffffa0672cb3 ffff8801710c4e00 [39389.800012] ffff880034a63a78 ffffffffa0672cb3 ffff8801710c4e00 ffff880034a63a58 [39389.800012] Call Trace: [39389.800012] [<ffffffff81091963>] do_raw_write_lock+0x72/0x8c [39389.800012] [<ffffffff81486f1b>] _raw_write_lock+0x3a/0x41 [39389.800012] [<ffffffffa0672cb3>] ? btrfs_tree_lock+0x119/0x251 [btrfs] [39389.800012] [<ffffffffa0672cb3>] btrfs_tree_lock+0x119/0x251 [btrfs] [39389.800012] [<ffffffffa061aeba>] ? rcu_read_unlock+0x5b/0x5d [btrfs] [39389.800012] [<ffffffffa061ce13>] ? btrfs_root_node+0xda/0xe6 [btrfs] [39389.800012] [<ffffffffa061ce83>] btrfs_lock_root_node+0x22/0x42 [btrfs] [39389.800012] [<ffffffffa062046b>] btrfs_search_slot+0x1b8/0x758 [btrfs] [39389.800012] [<ffffffff810fc6b0>] ? time_hardirqs_on+0x15/0x28 [39389.800012] [<ffffffffa06365db>] btrfs_lookup_inode+0x31/0x95 [btrfs] [39389.800012] [<ffffffff8108d62f>] ? trace_hardirqs_on+0xd/0xf [39389.800012] [<ffffffff8148482b>] ? mutex_lock_nested+0x397/0x3bc [39389.800012] [<ffffffffa068821b>] __btrfs_update_delayed_inode+0x59/0x1c0 [btrfs] [39389.800012] [<ffffffffa068858e>] __btrfs_commit_inode_delayed_items+0x194/0x5aa [btrfs] [39389.800012] [<ffffffff81486ab7>] ? _raw_spin_unlock+0x31/0x44 [39389.800012] [<ffffffffa0688a48>] __btrfs_run_delayed_items+0xa4/0x15c [btrfs] [39389.800012] [<ffffffffa0688d62>] btrfs_run_delayed_items+0x11/0x13 [btrfs] [39389.800012] [<ffffffffa064048e>] btrfs_commit_transaction+0x234/0x96e [btrfs] [39389.800012] [<ffffffffa0618d10>] btrfs_sync_fs+0x145/0x1ad [btrfs] [39389.800012] [<ffffffffa0671176>] btrfs_ioctl+0x11d2/0x2793 [btrfs] [39389.800012] [<ffffffff8108a8b0>] ? arch_local_irq_save+0x9/0xc [39389.800012] [<ffffffff81140261>] ? __might_fault+0x4c/0xa7 [39389.800012] [<ffffffff81140261>] ? __might_fault+0x4c/0xa7 [39389.800012] [<ffffffff8108a8b0>] ? arch_local_irq_save+0x9/0xc [39389.800012] [<ffffffff8118b3d4>] ? rcu_read_unlock+0x3e/0x5d [39389.800012] [<ffffffff811822f8>] do_vfs_ioctl+0x42b/0x4ea [39389.800012] [<ffffffff8118b4f3>] ? __fget_light+0x62/0x71 [39389.800012] [<ffffffff8118240e>] SyS_ioctl+0x57/0x79 [39389.800012] [<ffffffff814872d7>] entry_SYSCALL_64_fastpath+0x12/0x6f [39389.800012] Code: f0 0f b1 13 85 c0 75 ef eb 2a f3 90 8a 03 84 c0 75 f8 f0 0f b0 13 84 c0 75 f0 ba ff 00 00 00 eb 0a f0 0f b1 13 ff c8 74 0b f3 90 <8b> 03 83 f8 01 75 f7 eb ed c6 43 04 00 5b 5d c3 0f 1f 44 00 00 This happens because in the code path executed by the inode_paths ioctl we end up nesting two calls to read lock a leaf's rwlock when after the first call to read_lock() and before the second call to read_lock(), another task (running the delayed items as part of a transaction commit) has already called write_lock() against the leaf's rwlock. This situation is illustrated by the following diagram: Task A Task B btrfs_ref_to_path() btrfs_commit_transaction() read_lock(&eb->lock); btrfs_run_delayed_items() __btrfs_commit_inode_delayed_items() __btrfs_update_delayed_inode() btrfs_lookup_inode() write_lock(&eb->lock); --> task waits for lock read_lock(&eb->lock); --> makes this task hang forever (and task B too of course) So fix this by avoiding doing the nested read lock, which is easily avoidable. This issue does not happen if task B calls write_lock() after task A does the second call to read_lock(), however there does not seem to exist anything in the documentation that mentions what is the expected behaviour for recursive locking of rwlocks (leaving the idea that doing so is not a good usage of rwlocks). Also, as a side effect necessary for this fix, make sure we do not needlessly read lock extent buffers when the input path has skip_locking set (used when called from send). Cc: stable@vger.kernel.org Signed-off-by: Filipe Manana <fdmanana@suse.com>
2016-02-04 03:17:27 +08:00
if (!path->skip_locking)
btrfs_set_lock_blocking_read(eb);
Btrfs: fix hang on extent buffer lock caused by the inode_paths ioctl While doing some tests I ran into an hang on an extent buffer's rwlock that produced the following trace: [39389.800012] NMI watchdog: BUG: soft lockup - CPU#15 stuck for 22s! [fdm-stress:32166] [39389.800016] NMI watchdog: BUG: soft lockup - CPU#14 stuck for 22s! [fdm-stress:32165] [39389.800016] Modules linked in: btrfs dm_mod ppdev xor sha256_generic hmac raid6_pq drbg ansi_cprng aesni_intel i2c_piix4 acpi_cpufreq aes_x86_64 ablk_helper tpm_tis parport_pc i2c_core sg cryptd evdev psmouse lrw tpm parport gf128mul serio_raw pcspkr glue_helper processor button loop autofs4 ext4 crc16 mbcache jbd2 sd_mod sr_mod cdrom ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring crc32c_intel scsi_mod e1000 virtio floppy [last unloaded: btrfs] [39389.800016] irq event stamp: 0 [39389.800016] hardirqs last enabled at (0): [< (null)>] (null) [39389.800016] hardirqs last disabled at (0): [<ffffffff8104e58d>] copy_process+0x638/0x1a35 [39389.800016] softirqs last enabled at (0): [<ffffffff8104e58d>] copy_process+0x638/0x1a35 [39389.800016] softirqs last disabled at (0): [< (null)>] (null) [39389.800016] CPU: 14 PID: 32165 Comm: fdm-stress Not tainted 4.4.0-rc6-btrfs-next-18+ #1 [39389.800016] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014 [39389.800016] task: ffff880175b1ca40 ti: ffff8800a185c000 task.ti: ffff8800a185c000 [39389.800016] RIP: 0010:[<ffffffff810902af>] [<ffffffff810902af>] queued_spin_lock_slowpath+0x57/0x158 [39389.800016] RSP: 0018:ffff8800a185fb80 EFLAGS: 00000202 [39389.800016] RAX: 0000000000000101 RBX: ffff8801710c4e9c RCX: 0000000000000101 [39389.800016] RDX: 0000000000000100 RSI: 0000000000000001 RDI: 0000000000000001 [39389.800016] RBP: ffff8800a185fb98 R08: 0000000000000001 R09: 0000000000000000 [39389.800016] R10: ffff8800a185fb68 R11: 6db6db6db6db6db7 R12: ffff8801710c4e98 [39389.800016] R13: ffff880175b1ca40 R14: ffff8800a185fc10 R15: ffff880175b1ca40 [39389.800016] FS: 00007f6d37fff700(0000) GS:ffff8802be9c0000(0000) knlGS:0000000000000000 [39389.800016] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [39389.800016] CR2: 00007f6d300019b8 CR3: 0000000037c93000 CR4: 00000000001406e0 [39389.800016] Stack: [39389.800016] ffff8801710c4e98 ffff8801710c4e98 ffff880175b1ca40 ffff8800a185fbb0 [39389.800016] ffffffff81091e11 ffff8801710c4e98 ffff8800a185fbc8 ffffffff81091895 [39389.800016] ffff8801710c4e98 ffff8800a185fbe8 ffffffff81486c5c ffffffffa067288c [39389.800016] Call Trace: [39389.800016] [<ffffffff81091e11>] queued_read_lock_slowpath+0x46/0x60 [39389.800016] [<ffffffff81091895>] do_raw_read_lock+0x3e/0x41 [39389.800016] [<ffffffff81486c5c>] _raw_read_lock+0x3d/0x44 [39389.800016] [<ffffffffa067288c>] ? btrfs_tree_read_lock+0x54/0x125 [btrfs] [39389.800016] [<ffffffffa067288c>] btrfs_tree_read_lock+0x54/0x125 [btrfs] [39389.800016] [<ffffffffa0622ced>] ? btrfs_find_item+0xa7/0xd2 [btrfs] [39389.800016] [<ffffffffa069363f>] btrfs_ref_to_path+0xd6/0x174 [btrfs] [39389.800016] [<ffffffffa0693730>] inode_to_path+0x53/0xa2 [btrfs] [39389.800016] [<ffffffffa0693e2e>] paths_from_inode+0x117/0x2ec [btrfs] [39389.800016] [<ffffffffa0670cff>] btrfs_ioctl+0xd5b/0x2793 [btrfs] [39389.800016] [<ffffffff8108a8b0>] ? arch_local_irq_save+0x9/0xc [39389.800016] [<ffffffff81276727>] ? __this_cpu_preempt_check+0x13/0x15 [39389.800016] [<ffffffff8108a8b0>] ? arch_local_irq_save+0x9/0xc [39389.800016] [<ffffffff8118b3d4>] ? rcu_read_unlock+0x3e/0x5d [39389.800016] [<ffffffff811822f8>] do_vfs_ioctl+0x42b/0x4ea [39389.800016] [<ffffffff8118b4f3>] ? __fget_light+0x62/0x71 [39389.800016] [<ffffffff8118240e>] SyS_ioctl+0x57/0x79 [39389.800016] [<ffffffff814872d7>] entry_SYSCALL_64_fastpath+0x12/0x6f [39389.800016] Code: b9 01 01 00 00 f7 c6 00 ff ff ff 75 32 83 fe 01 89 ca 89 f0 0f 45 d7 f0 0f b1 13 39 f0 74 04 89 c6 eb e2 ff ca 0f 84 fa 00 00 00 <8b> 03 84 c0 74 04 f3 90 eb f6 66 c7 03 01 00 e9 e6 00 00 00 e8 [39389.800012] Modules linked in: btrfs dm_mod ppdev xor sha256_generic hmac raid6_pq drbg ansi_cprng aesni_intel i2c_piix4 acpi_cpufreq aes_x86_64 ablk_helper tpm_tis parport_pc i2c_core sg cryptd evdev psmouse lrw tpm parport gf128mul serio_raw pcspkr glue_helper processor button loop autofs4 ext4 crc16 mbcache jbd2 sd_mod sr_mod cdrom ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring crc32c_intel scsi_mod e1000 virtio floppy [last unloaded: btrfs] [39389.800012] irq event stamp: 0 [39389.800012] hardirqs last enabled at (0): [< (null)>] (null) [39389.800012] hardirqs last disabled at (0): [<ffffffff8104e58d>] copy_process+0x638/0x1a35 [39389.800012] softirqs last enabled at (0): [<ffffffff8104e58d>] copy_process+0x638/0x1a35 [39389.800012] softirqs last disabled at (0): [< (null)>] (null) [39389.800012] CPU: 15 PID: 32166 Comm: fdm-stress Tainted: G L 4.4.0-rc6-btrfs-next-18+ #1 [39389.800012] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014 [39389.800012] task: ffff880179294380 ti: ffff880034a60000 task.ti: ffff880034a60000 [39389.800012] RIP: 0010:[<ffffffff81091e8d>] [<ffffffff81091e8d>] queued_write_lock_slowpath+0x62/0x72 [39389.800012] RSP: 0018:ffff880034a639f0 EFLAGS: 00000206 [39389.800012] RAX: 0000000000000101 RBX: ffff8801710c4e98 RCX: 0000000000000000 [39389.800012] RDX: 00000000000000ff RSI: 0000000000000000 RDI: ffff8801710c4e9c [39389.800012] RBP: ffff880034a639f8 R08: 0000000000000001 R09: 0000000000000000 [39389.800012] R10: ffff880034a639b0 R11: 0000000000001000 R12: ffff8801710c4e98 [39389.800012] R13: 0000000000000001 R14: ffff880172cbc000 R15: ffff8801710c4e00 [39389.800012] FS: 00007f6d377fe700(0000) GS:ffff8802be9e0000(0000) knlGS:0000000000000000 [39389.800012] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [39389.800012] CR2: 00007f6d3d3c1000 CR3: 0000000037c93000 CR4: 00000000001406e0 [39389.800012] Stack: [39389.800012] ffff8801710c4e98 ffff880034a63a10 ffffffff81091963 ffff8801710c4e98 [39389.800012] ffff880034a63a30 ffffffff81486f1b ffffffffa0672cb3 ffff8801710c4e00 [39389.800012] ffff880034a63a78 ffffffffa0672cb3 ffff8801710c4e00 ffff880034a63a58 [39389.800012] Call Trace: [39389.800012] [<ffffffff81091963>] do_raw_write_lock+0x72/0x8c [39389.800012] [<ffffffff81486f1b>] _raw_write_lock+0x3a/0x41 [39389.800012] [<ffffffffa0672cb3>] ? btrfs_tree_lock+0x119/0x251 [btrfs] [39389.800012] [<ffffffffa0672cb3>] btrfs_tree_lock+0x119/0x251 [btrfs] [39389.800012] [<ffffffffa061aeba>] ? rcu_read_unlock+0x5b/0x5d [btrfs] [39389.800012] [<ffffffffa061ce13>] ? btrfs_root_node+0xda/0xe6 [btrfs] [39389.800012] [<ffffffffa061ce83>] btrfs_lock_root_node+0x22/0x42 [btrfs] [39389.800012] [<ffffffffa062046b>] btrfs_search_slot+0x1b8/0x758 [btrfs] [39389.800012] [<ffffffff810fc6b0>] ? time_hardirqs_on+0x15/0x28 [39389.800012] [<ffffffffa06365db>] btrfs_lookup_inode+0x31/0x95 [btrfs] [39389.800012] [<ffffffff8108d62f>] ? trace_hardirqs_on+0xd/0xf [39389.800012] [<ffffffff8148482b>] ? mutex_lock_nested+0x397/0x3bc [39389.800012] [<ffffffffa068821b>] __btrfs_update_delayed_inode+0x59/0x1c0 [btrfs] [39389.800012] [<ffffffffa068858e>] __btrfs_commit_inode_delayed_items+0x194/0x5aa [btrfs] [39389.800012] [<ffffffff81486ab7>] ? _raw_spin_unlock+0x31/0x44 [39389.800012] [<ffffffffa0688a48>] __btrfs_run_delayed_items+0xa4/0x15c [btrfs] [39389.800012] [<ffffffffa0688d62>] btrfs_run_delayed_items+0x11/0x13 [btrfs] [39389.800012] [<ffffffffa064048e>] btrfs_commit_transaction+0x234/0x96e [btrfs] [39389.800012] [<ffffffffa0618d10>] btrfs_sync_fs+0x145/0x1ad [btrfs] [39389.800012] [<ffffffffa0671176>] btrfs_ioctl+0x11d2/0x2793 [btrfs] [39389.800012] [<ffffffff8108a8b0>] ? arch_local_irq_save+0x9/0xc [39389.800012] [<ffffffff81140261>] ? __might_fault+0x4c/0xa7 [39389.800012] [<ffffffff81140261>] ? __might_fault+0x4c/0xa7 [39389.800012] [<ffffffff8108a8b0>] ? arch_local_irq_save+0x9/0xc [39389.800012] [<ffffffff8118b3d4>] ? rcu_read_unlock+0x3e/0x5d [39389.800012] [<ffffffff811822f8>] do_vfs_ioctl+0x42b/0x4ea [39389.800012] [<ffffffff8118b4f3>] ? __fget_light+0x62/0x71 [39389.800012] [<ffffffff8118240e>] SyS_ioctl+0x57/0x79 [39389.800012] [<ffffffff814872d7>] entry_SYSCALL_64_fastpath+0x12/0x6f [39389.800012] Code: f0 0f b1 13 85 c0 75 ef eb 2a f3 90 8a 03 84 c0 75 f8 f0 0f b0 13 84 c0 75 f0 ba ff 00 00 00 eb 0a f0 0f b1 13 ff c8 74 0b f3 90 <8b> 03 83 f8 01 75 f7 eb ed c6 43 04 00 5b 5d c3 0f 1f 44 00 00 This happens because in the code path executed by the inode_paths ioctl we end up nesting two calls to read lock a leaf's rwlock when after the first call to read_lock() and before the second call to read_lock(), another task (running the delayed items as part of a transaction commit) has already called write_lock() against the leaf's rwlock. This situation is illustrated by the following diagram: Task A Task B btrfs_ref_to_path() btrfs_commit_transaction() read_lock(&eb->lock); btrfs_run_delayed_items() __btrfs_commit_inode_delayed_items() __btrfs_update_delayed_inode() btrfs_lookup_inode() write_lock(&eb->lock); --> task waits for lock read_lock(&eb->lock); --> makes this task hang forever (and task B too of course) So fix this by avoiding doing the nested read lock, which is easily avoidable. This issue does not happen if task B calls write_lock() after task A does the second call to read_lock(), however there does not seem to exist anything in the documentation that mentions what is the expected behaviour for recursive locking of rwlocks (leaving the idea that doing so is not a good usage of rwlocks). Also, as a side effect necessary for this fix, make sure we do not needlessly read lock extent buffers when the input path has skip_locking set (used when called from send). Cc: stable@vger.kernel.org Signed-off-by: Filipe Manana <fdmanana@suse.com>
2016-02-04 03:17:27 +08:00
path->nodes[0] = NULL;
path->locks[0] = 0;
}
btrfs_release_path(path);
iref = btrfs_item_ptr(eb, slot, struct btrfs_inode_ref);
name_len = btrfs_inode_ref_name_len(eb, iref);
name_off = (unsigned long)(iref + 1);
parent = next_inum;
--bytes_left;
if (bytes_left >= 0)
dest[bytes_left] = '/';
}
btrfs_release_path(path);
path->leave_spinning = leave_spinning;
if (ret)
return ERR_PTR(ret);
return dest + bytes_left;
}
/*
* this makes the path point to (logical EXTENT_ITEM *)
* returns BTRFS_EXTENT_FLAG_DATA for data, BTRFS_EXTENT_FLAG_TREE_BLOCK for
* tree blocks and <0 on error.
*/
int extent_from_logical(struct btrfs_fs_info *fs_info, u64 logical,
struct btrfs_path *path, struct btrfs_key *found_key,
u64 *flags_ret)
{
int ret;
u64 flags;
u64 size = 0;
u32 item_size;
const struct extent_buffer *eb;
struct btrfs_extent_item *ei;
struct btrfs_key key;
if (btrfs_fs_incompat(fs_info, SKINNY_METADATA))
key.type = BTRFS_METADATA_ITEM_KEY;
else
key.type = BTRFS_EXTENT_ITEM_KEY;
key.objectid = logical;
key.offset = (u64)-1;
ret = btrfs_search_slot(NULL, fs_info->extent_root, &key, path, 0, 0);
if (ret < 0)
return ret;
ret = btrfs_previous_extent_item(fs_info->extent_root, path, 0);
if (ret) {
if (ret > 0)
ret = -ENOENT;
return ret;
}
btrfs_item_key_to_cpu(path->nodes[0], found_key, path->slots[0]);
if (found_key->type == BTRFS_METADATA_ITEM_KEY)
size = fs_info->nodesize;
else if (found_key->type == BTRFS_EXTENT_ITEM_KEY)
size = found_key->offset;
if (found_key->objectid > logical ||
found_key->objectid + size <= logical) {
btrfs_debug(fs_info,
"logical %llu is not within any extent", logical);
return -ENOENT;
}
eb = path->nodes[0];
item_size = btrfs_item_size_nr(eb, path->slots[0]);
BUG_ON(item_size < sizeof(*ei));
ei = btrfs_item_ptr(eb, path->slots[0], struct btrfs_extent_item);
flags = btrfs_extent_flags(eb, ei);
btrfs_debug(fs_info,
"logical %llu is at position %llu within the extent (%llu EXTENT_ITEM %llu) flags %#llx size %u",
logical, logical - found_key->objectid, found_key->objectid,
found_key->offset, flags, item_size);
WARN_ON(!flags_ret);
if (flags_ret) {
if (flags & BTRFS_EXTENT_FLAG_TREE_BLOCK)
*flags_ret = BTRFS_EXTENT_FLAG_TREE_BLOCK;
else if (flags & BTRFS_EXTENT_FLAG_DATA)
*flags_ret = BTRFS_EXTENT_FLAG_DATA;
else
btrfs: use BUG() instead of BUG_ON(1) BUG_ON(1) leads to bogus warnings from clang when CONFIG_PROFILE_ANNOTATED_BRANCHES is set: fs/btrfs/volumes.c:5041:3: error: variable 'max_chunk_size' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] BUG_ON(1); ^~~~~~~~~ include/asm-generic/bug.h:61:36: note: expanded from macro 'BUG_ON' #define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0) ^~~~~~~~~~~~~~~~~~~ include/linux/compiler.h:48:23: note: expanded from macro 'unlikely' # define unlikely(x) (__branch_check__(x, 0, __builtin_constant_p(x))) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ fs/btrfs/volumes.c:5046:9: note: uninitialized use occurs here max_chunk_size); ^~~~~~~~~~~~~~ include/linux/kernel.h:860:36: note: expanded from macro 'min' #define min(x, y) __careful_cmp(x, y, <) ^ include/linux/kernel.h:853:17: note: expanded from macro '__careful_cmp' __cmp_once(x, y, __UNIQUE_ID(__x), __UNIQUE_ID(__y), op)) ^ include/linux/kernel.h:847:25: note: expanded from macro '__cmp_once' typeof(y) unique_y = (y); \ ^ fs/btrfs/volumes.c:5041:3: note: remove the 'if' if its condition is always true BUG_ON(1); ^ include/asm-generic/bug.h:61:32: note: expanded from macro 'BUG_ON' #define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0) ^ fs/btrfs/volumes.c:4993:20: note: initialize the variable 'max_chunk_size' to silence this warning u64 max_chunk_size; ^ = 0 Change it to BUG() so clang can see that this code path can never continue. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David Sterba <dsterba@suse.com>
2019-03-25 21:02:25 +08:00
BUG();
return 0;
}
return -EIO;
}
/*
* helper function to iterate extent inline refs. ptr must point to a 0 value
* for the first call and may be modified. it is used to track state.
* if more refs exist, 0 is returned and the next call to
* get_extent_inline_ref must pass the modified ptr parameter to get the
* next ref. after the last ref was processed, 1 is returned.
* returns <0 on error
*/
static int get_extent_inline_ref(unsigned long *ptr,
const struct extent_buffer *eb,
const struct btrfs_key *key,
const struct btrfs_extent_item *ei,
u32 item_size,
struct btrfs_extent_inline_ref **out_eiref,
int *out_type)
{
unsigned long end;
u64 flags;
struct btrfs_tree_block_info *info;
if (!*ptr) {
/* first call */
flags = btrfs_extent_flags(eb, ei);
if (flags & BTRFS_EXTENT_FLAG_TREE_BLOCK) {
if (key->type == BTRFS_METADATA_ITEM_KEY) {
/* a skinny metadata extent */
*out_eiref =
(struct btrfs_extent_inline_ref *)(ei + 1);
} else {
WARN_ON(key->type != BTRFS_EXTENT_ITEM_KEY);
info = (struct btrfs_tree_block_info *)(ei + 1);
*out_eiref =
(struct btrfs_extent_inline_ref *)(info + 1);
}
} else {
*out_eiref = (struct btrfs_extent_inline_ref *)(ei + 1);
}
*ptr = (unsigned long)*out_eiref;
if ((unsigned long)(*ptr) >= (unsigned long)ei + item_size)
return -ENOENT;
}
end = (unsigned long)ei + item_size;
*out_eiref = (struct btrfs_extent_inline_ref *)(*ptr);
*out_type = btrfs_get_extent_inline_ref_type(eb, *out_eiref,
BTRFS_REF_TYPE_ANY);
if (*out_type == BTRFS_REF_TYPE_INVALID)
return -EUCLEAN;
*ptr += btrfs_extent_inline_ref_size(*out_type);
WARN_ON(*ptr > end);
if (*ptr == end)
return 1; /* last */
return 0;
}
/*
* reads the tree block backref for an extent. tree level and root are returned
* through out_level and out_root. ptr must point to a 0 value for the first
* call and may be modified (see get_extent_inline_ref comment).
* returns 0 if data was provided, 1 if there was no more data to provide or
* <0 on error.
*/
int tree_backref_for_extent(unsigned long *ptr, struct extent_buffer *eb,
struct btrfs_key *key, struct btrfs_extent_item *ei,
u32 item_size, u64 *out_root, u8 *out_level)
{
int ret;
int type;
struct btrfs_extent_inline_ref *eiref;
if (*ptr == (unsigned long)-1)
return 1;
while (1) {
ret = get_extent_inline_ref(ptr, eb, key, ei, item_size,
&eiref, &type);
if (ret < 0)
return ret;
if (type == BTRFS_TREE_BLOCK_REF_KEY ||
type == BTRFS_SHARED_BLOCK_REF_KEY)
break;
if (ret == 1)
return 1;
}
/* we can treat both ref types equally here */
*out_root = btrfs_extent_inline_ref_offset(eb, eiref);
if (key->type == BTRFS_EXTENT_ITEM_KEY) {
struct btrfs_tree_block_info *info;
info = (struct btrfs_tree_block_info *)(ei + 1);
*out_level = btrfs_tree_block_level(eb, info);
} else {
ASSERT(key->type == BTRFS_METADATA_ITEM_KEY);
*out_level = (u8)key->offset;
}
if (ret == 1)
*ptr = (unsigned long)-1;
return 0;
}
static int iterate_leaf_refs(struct btrfs_fs_info *fs_info,
struct extent_inode_elem *inode_list,
u64 root, u64 extent_item_objectid,
iterate_extent_inodes_t *iterate, void *ctx)
{
struct extent_inode_elem *eie;
int ret = 0;
for (eie = inode_list; eie; eie = eie->next) {
btrfs_debug(fs_info,
"ref for %llu resolved, key (%llu EXTEND_DATA %llu), root %llu",
extent_item_objectid, eie->inum,
eie->offset, root);
ret = iterate(eie->inum, eie->offset, root, ctx);
if (ret) {
btrfs_debug(fs_info,
"stopping iteration for %llu due to ret=%d",
extent_item_objectid, ret);
break;
}
}
return ret;
}
/*
* calls iterate() for every inode that references the extent identified by
* the given parameters.
* when the iterator function returns a non-zero value, iteration stops.
*/
int iterate_extent_inodes(struct btrfs_fs_info *fs_info,
u64 extent_item_objectid, u64 extent_item_pos,
int search_commit_root,
btrfs: add a flag to iterate_inodes_from_logical to find all extent refs for uncompressed extents The LOGICAL_INO ioctl provides a backward mapping from extent bytenr and offset (encoded as a single logical address) to a list of extent refs. LOGICAL_INO complements TREE_SEARCH, which provides the forward mapping (extent ref -> extent bytenr and offset, or logical address). These are useful capabilities for programs that manipulate extents and extent references from userspace (e.g. dedup and defrag utilities). When the extents are uncompressed (and not encrypted and not other), check_extent_in_eb performs filtering of the extent refs to remove any extent refs which do not contain the same extent offset as the 'logical' parameter's extent offset. This prevents LOGICAL_INO from returning references to more than a single block. To find the set of extent references to an uncompressed extent from [a, b), userspace has to run a loop like this pseudocode: for (i = a; i < b; ++i) extent_ref_set += LOGICAL_INO(i); At each iteration of the loop (up to 32768 iterations for a 128M extent), data we are interested in is collected in the kernel, then deleted by the filter in check_extent_in_eb. When the extents are compressed (or encrypted or other), the 'logical' parameter must be an extent bytenr (the 'a' parameter in the loop). No filtering by extent offset is done (or possible?) so the result is the complete set of extent refs for the entire extent. This removes the need for the loop, since we get all the extent refs in one call. Add an 'ignore_offset' argument to iterate_inodes_from_logical, [...several levels of function call graph...], and check_extent_in_eb, so that we can disable the extent offset filtering for uncompressed extents. This flag can be set by an improved version of the LOGICAL_INO ioctl to get either behavior as desired. There is no functional change in this patch. The new flag is always false. Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Reviewed-by: David Sterba <dsterba@suse.com> [ minor coding style fixes ] Signed-off-by: David Sterba <dsterba@suse.com>
2017-09-23 01:58:45 +08:00
iterate_extent_inodes_t *iterate, void *ctx,
bool ignore_offset)
{
int ret;
struct btrfs_trans_handle *trans = NULL;
struct ulist *refs = NULL;
struct ulist *roots = NULL;
struct ulist_node *ref_node = NULL;
struct ulist_node *root_node = NULL;
struct seq_list tree_mod_seq_elem = SEQ_LIST_INIT(tree_mod_seq_elem);
struct ulist_iterator ref_uiter;
struct ulist_iterator root_uiter;
btrfs_debug(fs_info, "resolving all inodes for extent %llu",
extent_item_objectid);
if (!search_commit_root) {
Btrfs: do not start a transaction at iterate_extent_inodes() When finding out which inodes have references on a particular extent, done by backref.c:iterate_extent_inodes(), from the BTRFS_IOC_LOGICAL_INO (both v1 and v2) ioctl and from scrub we use the transaction join API to grab a reference on the currently running transaction, since in order to give accurate results we need to inspect the delayed references of the currently running transaction. However, if there is currently no running transaction, the join operation will create a new transaction. This is inefficient as the transaction will eventually be committed, doing unnecessary IO and introducing a potential point of failure that will lead to a transaction abort due to -ENOSPC, as recently reported [1]. That's because the join, creates the transaction but does not reserve any space, so when attempting to update the root item of the root passed to btrfs_join_transaction(), during the transaction commit, we can end up failling with -ENOSPC. Users of a join operation are supposed to actually do some filesystem changes and reserve space by some means, which is not the case of iterate_extent_inodes(), it is a read-only operation for all contextes from which it is called. The reported [1] -ENOSPC failure stack trace is the following: heisenberg kernel: ------------[ cut here ]------------ heisenberg kernel: BTRFS: Transaction aborted (error -28) heisenberg kernel: WARNING: CPU: 0 PID: 7137 at fs/btrfs/root-tree.c:136 btrfs_update_root+0x22b/0x320 [btrfs] (...) heisenberg kernel: CPU: 0 PID: 7137 Comm: btrfs-transacti Not tainted 4.19.0-4-amd64 #1 Debian 4.19.28-2 heisenberg kernel: Hardware name: FUJITSU LIFEBOOK U757/FJNB2A5, BIOS Version 1.21 03/19/2018 heisenberg kernel: RIP: 0010:btrfs_update_root+0x22b/0x320 [btrfs] (...) heisenberg kernel: RSP: 0018:ffffb5448828bd40 EFLAGS: 00010286 heisenberg kernel: RAX: 0000000000000000 RBX: ffff8ed56bccef50 RCX: 0000000000000006 heisenberg kernel: RDX: 0000000000000007 RSI: 0000000000000092 RDI: ffff8ed6bda166a0 heisenberg kernel: RBP: 00000000ffffffe4 R08: 00000000000003df R09: 0000000000000007 heisenberg kernel: R10: 0000000000000000 R11: 0000000000000001 R12: ffff8ed63396a078 heisenberg kernel: R13: ffff8ed092d7c800 R14: ffff8ed64f5db028 R15: ffff8ed6bd03d068 heisenberg kernel: FS: 0000000000000000(0000) GS:ffff8ed6bda00000(0000) knlGS:0000000000000000 heisenberg kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 heisenberg kernel: CR2: 00007f46f75f8000 CR3: 0000000310a0a002 CR4: 00000000003606f0 heisenberg kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 heisenberg kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 heisenberg kernel: Call Trace: heisenberg kernel: commit_fs_roots+0x166/0x1d0 [btrfs] heisenberg kernel: ? _cond_resched+0x15/0x30 heisenberg kernel: ? btrfs_run_delayed_refs+0xac/0x180 [btrfs] heisenberg kernel: btrfs_commit_transaction+0x2bd/0x870 [btrfs] heisenberg kernel: ? start_transaction+0x9d/0x3f0 [btrfs] heisenberg kernel: transaction_kthread+0x147/0x180 [btrfs] heisenberg kernel: ? btrfs_cleanup_transaction+0x530/0x530 [btrfs] heisenberg kernel: kthread+0x112/0x130 heisenberg kernel: ? kthread_bind+0x30/0x30 heisenberg kernel: ret_from_fork+0x35/0x40 heisenberg kernel: ---[ end trace 05de912e30e012d9 ]--- So fix that by using the attach API, which does not create a transaction when there is currently no running transaction. [1] https://lore.kernel.org/linux-btrfs/b2a668d7124f1d3e410367f587926f622b3f03a4.camel@scientia.net/ Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org> CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-04-17 18:30:30 +08:00
trans = btrfs_attach_transaction(fs_info->extent_root);
if (IS_ERR(trans)) {
if (PTR_ERR(trans) != -ENOENT &&
PTR_ERR(trans) != -EROFS)
return PTR_ERR(trans);
trans = NULL;
}
}
if (trans)
btrfs_get_tree_mod_seq(fs_info, &tree_mod_seq_elem);
Btrfs: do not start a transaction at iterate_extent_inodes() When finding out which inodes have references on a particular extent, done by backref.c:iterate_extent_inodes(), from the BTRFS_IOC_LOGICAL_INO (both v1 and v2) ioctl and from scrub we use the transaction join API to grab a reference on the currently running transaction, since in order to give accurate results we need to inspect the delayed references of the currently running transaction. However, if there is currently no running transaction, the join operation will create a new transaction. This is inefficient as the transaction will eventually be committed, doing unnecessary IO and introducing a potential point of failure that will lead to a transaction abort due to -ENOSPC, as recently reported [1]. That's because the join, creates the transaction but does not reserve any space, so when attempting to update the root item of the root passed to btrfs_join_transaction(), during the transaction commit, we can end up failling with -ENOSPC. Users of a join operation are supposed to actually do some filesystem changes and reserve space by some means, which is not the case of iterate_extent_inodes(), it is a read-only operation for all contextes from which it is called. The reported [1] -ENOSPC failure stack trace is the following: heisenberg kernel: ------------[ cut here ]------------ heisenberg kernel: BTRFS: Transaction aborted (error -28) heisenberg kernel: WARNING: CPU: 0 PID: 7137 at fs/btrfs/root-tree.c:136 btrfs_update_root+0x22b/0x320 [btrfs] (...) heisenberg kernel: CPU: 0 PID: 7137 Comm: btrfs-transacti Not tainted 4.19.0-4-amd64 #1 Debian 4.19.28-2 heisenberg kernel: Hardware name: FUJITSU LIFEBOOK U757/FJNB2A5, BIOS Version 1.21 03/19/2018 heisenberg kernel: RIP: 0010:btrfs_update_root+0x22b/0x320 [btrfs] (...) heisenberg kernel: RSP: 0018:ffffb5448828bd40 EFLAGS: 00010286 heisenberg kernel: RAX: 0000000000000000 RBX: ffff8ed56bccef50 RCX: 0000000000000006 heisenberg kernel: RDX: 0000000000000007 RSI: 0000000000000092 RDI: ffff8ed6bda166a0 heisenberg kernel: RBP: 00000000ffffffe4 R08: 00000000000003df R09: 0000000000000007 heisenberg kernel: R10: 0000000000000000 R11: 0000000000000001 R12: ffff8ed63396a078 heisenberg kernel: R13: ffff8ed092d7c800 R14: ffff8ed64f5db028 R15: ffff8ed6bd03d068 heisenberg kernel: FS: 0000000000000000(0000) GS:ffff8ed6bda00000(0000) knlGS:0000000000000000 heisenberg kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 heisenberg kernel: CR2: 00007f46f75f8000 CR3: 0000000310a0a002 CR4: 00000000003606f0 heisenberg kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 heisenberg kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 heisenberg kernel: Call Trace: heisenberg kernel: commit_fs_roots+0x166/0x1d0 [btrfs] heisenberg kernel: ? _cond_resched+0x15/0x30 heisenberg kernel: ? btrfs_run_delayed_refs+0xac/0x180 [btrfs] heisenberg kernel: btrfs_commit_transaction+0x2bd/0x870 [btrfs] heisenberg kernel: ? start_transaction+0x9d/0x3f0 [btrfs] heisenberg kernel: transaction_kthread+0x147/0x180 [btrfs] heisenberg kernel: ? btrfs_cleanup_transaction+0x530/0x530 [btrfs] heisenberg kernel: kthread+0x112/0x130 heisenberg kernel: ? kthread_bind+0x30/0x30 heisenberg kernel: ret_from_fork+0x35/0x40 heisenberg kernel: ---[ end trace 05de912e30e012d9 ]--- So fix that by using the attach API, which does not create a transaction when there is currently no running transaction. [1] https://lore.kernel.org/linux-btrfs/b2a668d7124f1d3e410367f587926f622b3f03a4.camel@scientia.net/ Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org> CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-04-17 18:30:30 +08:00
else
down_read(&fs_info->commit_root_sem);
ret = btrfs_find_all_leafs(trans, fs_info, extent_item_objectid,
tree_mod_seq_elem.seq, &refs,
btrfs: add a flag to iterate_inodes_from_logical to find all extent refs for uncompressed extents The LOGICAL_INO ioctl provides a backward mapping from extent bytenr and offset (encoded as a single logical address) to a list of extent refs. LOGICAL_INO complements TREE_SEARCH, which provides the forward mapping (extent ref -> extent bytenr and offset, or logical address). These are useful capabilities for programs that manipulate extents and extent references from userspace (e.g. dedup and defrag utilities). When the extents are uncompressed (and not encrypted and not other), check_extent_in_eb performs filtering of the extent refs to remove any extent refs which do not contain the same extent offset as the 'logical' parameter's extent offset. This prevents LOGICAL_INO from returning references to more than a single block. To find the set of extent references to an uncompressed extent from [a, b), userspace has to run a loop like this pseudocode: for (i = a; i < b; ++i) extent_ref_set += LOGICAL_INO(i); At each iteration of the loop (up to 32768 iterations for a 128M extent), data we are interested in is collected in the kernel, then deleted by the filter in check_extent_in_eb. When the extents are compressed (or encrypted or other), the 'logical' parameter must be an extent bytenr (the 'a' parameter in the loop). No filtering by extent offset is done (or possible?) so the result is the complete set of extent refs for the entire extent. This removes the need for the loop, since we get all the extent refs in one call. Add an 'ignore_offset' argument to iterate_inodes_from_logical, [...several levels of function call graph...], and check_extent_in_eb, so that we can disable the extent offset filtering for uncompressed extents. This flag can be set by an improved version of the LOGICAL_INO ioctl to get either behavior as desired. There is no functional change in this patch. The new flag is always false. Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Reviewed-by: David Sterba <dsterba@suse.com> [ minor coding style fixes ] Signed-off-by: David Sterba <dsterba@suse.com>
2017-09-23 01:58:45 +08:00
&extent_item_pos, ignore_offset);
if (ret)
goto out;
ULIST_ITER_INIT(&ref_uiter);
while (!ret && (ref_node = ulist_next(refs, &ref_uiter))) {
ret = btrfs_find_all_roots_safe(trans, fs_info, ref_node->val,
btrfs: add a flag to iterate_inodes_from_logical to find all extent refs for uncompressed extents The LOGICAL_INO ioctl provides a backward mapping from extent bytenr and offset (encoded as a single logical address) to a list of extent refs. LOGICAL_INO complements TREE_SEARCH, which provides the forward mapping (extent ref -> extent bytenr and offset, or logical address). These are useful capabilities for programs that manipulate extents and extent references from userspace (e.g. dedup and defrag utilities). When the extents are uncompressed (and not encrypted and not other), check_extent_in_eb performs filtering of the extent refs to remove any extent refs which do not contain the same extent offset as the 'logical' parameter's extent offset. This prevents LOGICAL_INO from returning references to more than a single block. To find the set of extent references to an uncompressed extent from [a, b), userspace has to run a loop like this pseudocode: for (i = a; i < b; ++i) extent_ref_set += LOGICAL_INO(i); At each iteration of the loop (up to 32768 iterations for a 128M extent), data we are interested in is collected in the kernel, then deleted by the filter in check_extent_in_eb. When the extents are compressed (or encrypted or other), the 'logical' parameter must be an extent bytenr (the 'a' parameter in the loop). No filtering by extent offset is done (or possible?) so the result is the complete set of extent refs for the entire extent. This removes the need for the loop, since we get all the extent refs in one call. Add an 'ignore_offset' argument to iterate_inodes_from_logical, [...several levels of function call graph...], and check_extent_in_eb, so that we can disable the extent offset filtering for uncompressed extents. This flag can be set by an improved version of the LOGICAL_INO ioctl to get either behavior as desired. There is no functional change in this patch. The new flag is always false. Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Reviewed-by: David Sterba <dsterba@suse.com> [ minor coding style fixes ] Signed-off-by: David Sterba <dsterba@suse.com>
2017-09-23 01:58:45 +08:00
tree_mod_seq_elem.seq, &roots,
ignore_offset);
if (ret)
break;
ULIST_ITER_INIT(&root_uiter);
while (!ret && (root_node = ulist_next(roots, &root_uiter))) {
btrfs_debug(fs_info,
"root %llu references leaf %llu, data list %#llx",
root_node->val, ref_node->val,
ref_node->aux);
ret = iterate_leaf_refs(fs_info,
(struct extent_inode_elem *)
(uintptr_t)ref_node->aux,
root_node->val,
extent_item_objectid,
iterate, ctx);
}
ulist_free(roots);
}
free_leaf_list(refs);
out:
Btrfs: do not start a transaction at iterate_extent_inodes() When finding out which inodes have references on a particular extent, done by backref.c:iterate_extent_inodes(), from the BTRFS_IOC_LOGICAL_INO (both v1 and v2) ioctl and from scrub we use the transaction join API to grab a reference on the currently running transaction, since in order to give accurate results we need to inspect the delayed references of the currently running transaction. However, if there is currently no running transaction, the join operation will create a new transaction. This is inefficient as the transaction will eventually be committed, doing unnecessary IO and introducing a potential point of failure that will lead to a transaction abort due to -ENOSPC, as recently reported [1]. That's because the join, creates the transaction but does not reserve any space, so when attempting to update the root item of the root passed to btrfs_join_transaction(), during the transaction commit, we can end up failling with -ENOSPC. Users of a join operation are supposed to actually do some filesystem changes and reserve space by some means, which is not the case of iterate_extent_inodes(), it is a read-only operation for all contextes from which it is called. The reported [1] -ENOSPC failure stack trace is the following: heisenberg kernel: ------------[ cut here ]------------ heisenberg kernel: BTRFS: Transaction aborted (error -28) heisenberg kernel: WARNING: CPU: 0 PID: 7137 at fs/btrfs/root-tree.c:136 btrfs_update_root+0x22b/0x320 [btrfs] (...) heisenberg kernel: CPU: 0 PID: 7137 Comm: btrfs-transacti Not tainted 4.19.0-4-amd64 #1 Debian 4.19.28-2 heisenberg kernel: Hardware name: FUJITSU LIFEBOOK U757/FJNB2A5, BIOS Version 1.21 03/19/2018 heisenberg kernel: RIP: 0010:btrfs_update_root+0x22b/0x320 [btrfs] (...) heisenberg kernel: RSP: 0018:ffffb5448828bd40 EFLAGS: 00010286 heisenberg kernel: RAX: 0000000000000000 RBX: ffff8ed56bccef50 RCX: 0000000000000006 heisenberg kernel: RDX: 0000000000000007 RSI: 0000000000000092 RDI: ffff8ed6bda166a0 heisenberg kernel: RBP: 00000000ffffffe4 R08: 00000000000003df R09: 0000000000000007 heisenberg kernel: R10: 0000000000000000 R11: 0000000000000001 R12: ffff8ed63396a078 heisenberg kernel: R13: ffff8ed092d7c800 R14: ffff8ed64f5db028 R15: ffff8ed6bd03d068 heisenberg kernel: FS: 0000000000000000(0000) GS:ffff8ed6bda00000(0000) knlGS:0000000000000000 heisenberg kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 heisenberg kernel: CR2: 00007f46f75f8000 CR3: 0000000310a0a002 CR4: 00000000003606f0 heisenberg kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 heisenberg kernel: DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 heisenberg kernel: Call Trace: heisenberg kernel: commit_fs_roots+0x166/0x1d0 [btrfs] heisenberg kernel: ? _cond_resched+0x15/0x30 heisenberg kernel: ? btrfs_run_delayed_refs+0xac/0x180 [btrfs] heisenberg kernel: btrfs_commit_transaction+0x2bd/0x870 [btrfs] heisenberg kernel: ? start_transaction+0x9d/0x3f0 [btrfs] heisenberg kernel: transaction_kthread+0x147/0x180 [btrfs] heisenberg kernel: ? btrfs_cleanup_transaction+0x530/0x530 [btrfs] heisenberg kernel: kthread+0x112/0x130 heisenberg kernel: ? kthread_bind+0x30/0x30 heisenberg kernel: ret_from_fork+0x35/0x40 heisenberg kernel: ---[ end trace 05de912e30e012d9 ]--- So fix that by using the attach API, which does not create a transaction when there is currently no running transaction. [1] https://lore.kernel.org/linux-btrfs/b2a668d7124f1d3e410367f587926f622b3f03a4.camel@scientia.net/ Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org> CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-04-17 18:30:30 +08:00
if (trans) {
btrfs_put_tree_mod_seq(fs_info, &tree_mod_seq_elem);
btrfs_end_transaction(trans);
} else {
up_read(&fs_info->commit_root_sem);
}
return ret;
}
int iterate_inodes_from_logical(u64 logical, struct btrfs_fs_info *fs_info,
struct btrfs_path *path,
btrfs: add a flag to iterate_inodes_from_logical to find all extent refs for uncompressed extents The LOGICAL_INO ioctl provides a backward mapping from extent bytenr and offset (encoded as a single logical address) to a list of extent refs. LOGICAL_INO complements TREE_SEARCH, which provides the forward mapping (extent ref -> extent bytenr and offset, or logical address). These are useful capabilities for programs that manipulate extents and extent references from userspace (e.g. dedup and defrag utilities). When the extents are uncompressed (and not encrypted and not other), check_extent_in_eb performs filtering of the extent refs to remove any extent refs which do not contain the same extent offset as the 'logical' parameter's extent offset. This prevents LOGICAL_INO from returning references to more than a single block. To find the set of extent references to an uncompressed extent from [a, b), userspace has to run a loop like this pseudocode: for (i = a; i < b; ++i) extent_ref_set += LOGICAL_INO(i); At each iteration of the loop (up to 32768 iterations for a 128M extent), data we are interested in is collected in the kernel, then deleted by the filter in check_extent_in_eb. When the extents are compressed (or encrypted or other), the 'logical' parameter must be an extent bytenr (the 'a' parameter in the loop). No filtering by extent offset is done (or possible?) so the result is the complete set of extent refs for the entire extent. This removes the need for the loop, since we get all the extent refs in one call. Add an 'ignore_offset' argument to iterate_inodes_from_logical, [...several levels of function call graph...], and check_extent_in_eb, so that we can disable the extent offset filtering for uncompressed extents. This flag can be set by an improved version of the LOGICAL_INO ioctl to get either behavior as desired. There is no functional change in this patch. The new flag is always false. Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Reviewed-by: David Sterba <dsterba@suse.com> [ minor coding style fixes ] Signed-off-by: David Sterba <dsterba@suse.com>
2017-09-23 01:58:45 +08:00
iterate_extent_inodes_t *iterate, void *ctx,
bool ignore_offset)
{
int ret;
u64 extent_item_pos;
u64 flags = 0;
struct btrfs_key found_key;
int search_commit_root = path->search_commit_root;
ret = extent_from_logical(fs_info, logical, path, &found_key, &flags);
btrfs_release_path(path);
if (ret < 0)
return ret;
if (flags & BTRFS_EXTENT_FLAG_TREE_BLOCK)
return -EINVAL;
extent_item_pos = logical - found_key.objectid;
ret = iterate_extent_inodes(fs_info, found_key.objectid,
extent_item_pos, search_commit_root,
btrfs: add a flag to iterate_inodes_from_logical to find all extent refs for uncompressed extents The LOGICAL_INO ioctl provides a backward mapping from extent bytenr and offset (encoded as a single logical address) to a list of extent refs. LOGICAL_INO complements TREE_SEARCH, which provides the forward mapping (extent ref -> extent bytenr and offset, or logical address). These are useful capabilities for programs that manipulate extents and extent references from userspace (e.g. dedup and defrag utilities). When the extents are uncompressed (and not encrypted and not other), check_extent_in_eb performs filtering of the extent refs to remove any extent refs which do not contain the same extent offset as the 'logical' parameter's extent offset. This prevents LOGICAL_INO from returning references to more than a single block. To find the set of extent references to an uncompressed extent from [a, b), userspace has to run a loop like this pseudocode: for (i = a; i < b; ++i) extent_ref_set += LOGICAL_INO(i); At each iteration of the loop (up to 32768 iterations for a 128M extent), data we are interested in is collected in the kernel, then deleted by the filter in check_extent_in_eb. When the extents are compressed (or encrypted or other), the 'logical' parameter must be an extent bytenr (the 'a' parameter in the loop). No filtering by extent offset is done (or possible?) so the result is the complete set of extent refs for the entire extent. This removes the need for the loop, since we get all the extent refs in one call. Add an 'ignore_offset' argument to iterate_inodes_from_logical, [...several levels of function call graph...], and check_extent_in_eb, so that we can disable the extent offset filtering for uncompressed extents. This flag can be set by an improved version of the LOGICAL_INO ioctl to get either behavior as desired. There is no functional change in this patch. The new flag is always false. Signed-off-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org> Reviewed-by: David Sterba <dsterba@suse.com> [ minor coding style fixes ] Signed-off-by: David Sterba <dsterba@suse.com>
2017-09-23 01:58:45 +08:00
iterate, ctx, ignore_offset);
return ret;
}
typedef int (iterate_irefs_t)(u64 parent, u32 name_len, unsigned long name_off,
struct extent_buffer *eb, void *ctx);
static int iterate_inode_refs(u64 inum, struct btrfs_root *fs_root,
struct btrfs_path *path,
iterate_irefs_t *iterate, void *ctx)
{
int ret = 0;
int slot;
u32 cur;
u32 len;
u32 name_len;
u64 parent = 0;
int found = 0;
struct extent_buffer *eb;
struct btrfs_item *item;
struct btrfs_inode_ref *iref;
struct btrfs_key found_key;
while (!ret) {
ret = btrfs_find_item(fs_root, path, inum,
parent ? parent + 1 : 0, BTRFS_INODE_REF_KEY,
&found_key);
if (ret < 0)
break;
if (ret) {
ret = found ? 0 : -ENOENT;
break;
}
++found;
parent = found_key.offset;
slot = path->slots[0];
Btrfs: fix deadlock when iterating inode refs and running delayed inodes While running btrfs/004 from xfstests, after 503 iterations, dmesg reported a deadlock between tasks iterating inode refs and tasks running delayed inodes (during a transaction commit). It turns out that iterating inode refs implies doing one tree search and release all nodes in the path except the leaf node, and then passing that leaf node to btrfs_ref_to_path(), which in turn does another tree search without releasing the lock on the leaf node it received as parameter. This is a problem when other task wants to write to the btree as well and ends up updating the leaf that is read locked - the writer task locks the parent of the leaf and then blocks waiting for the leaf's lock to be released - at the same time, the task executing btrfs_ref_to_path() does a second tree search, without releasing the lock on the first leaf, and wants to access a leaf (the same or another one) that is a child of the same parent, resulting in a deadlock. The trace reported by lockdep follows. [84314.936373] INFO: task fsstress:11930 blocked for more than 120 seconds. [84314.936381] Tainted: G W O 3.12.0-fdm-btrfs-next-16+ #70 [84314.936383] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [84314.936386] fsstress D ffff8806e1bf8000 0 11930 11926 0x00000000 [84314.936393] ffff8804d6d89b78 0000000000000046 ffff8804d6d89b18 ffffffff810bd8bd [84314.936399] ffff8806e1bf8000 ffff8804d6d89fd8 ffff8804d6d89fd8 ffff8804d6d89fd8 [84314.936405] ffff880806308000 ffff8806e1bf8000 ffff8804d6d89c08 ffff8804deb8f190 [84314.936410] Call Trace: [84314.936421] [<ffffffff810bd8bd>] ? trace_hardirqs_on+0xd/0x10 [84314.936428] [<ffffffff81774269>] schedule+0x29/0x70 [84314.936451] [<ffffffffa0715bf5>] btrfs_tree_lock+0x75/0x270 [btrfs] [84314.936457] [<ffffffff810715c0>] ? __init_waitqueue_head+0x60/0x60 [84314.936470] [<ffffffffa06ba231>] btrfs_search_slot+0x7f1/0x930 [btrfs] [84314.936489] [<ffffffffa0731c2a>] ? __btrfs_run_delayed_items+0x13a/0x1e0 [btrfs] [84314.936504] [<ffffffffa06d2e1f>] btrfs_lookup_inode+0x2f/0xa0 [btrfs] [84314.936510] [<ffffffff810bd6ef>] ? trace_hardirqs_on_caller+0x1f/0x1e0 [84314.936528] [<ffffffffa073173c>] __btrfs_update_delayed_inode+0x4c/0x1d0 [btrfs] [84314.936543] [<ffffffffa0731c2a>] ? __btrfs_run_delayed_items+0x13a/0x1e0 [btrfs] [84314.936558] [<ffffffffa0731c2a>] ? __btrfs_run_delayed_items+0x13a/0x1e0 [btrfs] [84314.936573] [<ffffffffa0731c82>] __btrfs_run_delayed_items+0x192/0x1e0 [btrfs] [84314.936589] [<ffffffffa0731d03>] btrfs_run_delayed_items+0x13/0x20 [btrfs] [84314.936604] [<ffffffffa06dbcd4>] btrfs_flush_all_pending_stuffs+0x24/0x80 [btrfs] [84314.936620] [<ffffffffa06ddc13>] btrfs_commit_transaction+0x223/0xa20 [btrfs] [84314.936630] [<ffffffffa06ae5ae>] btrfs_sync_fs+0x6e/0x110 [btrfs] [84314.936635] [<ffffffff811d0b50>] ? __sync_filesystem+0x60/0x60 [84314.936639] [<ffffffff811d0b50>] ? __sync_filesystem+0x60/0x60 [84314.936643] [<ffffffff811d0b70>] sync_fs_one_sb+0x20/0x30 [84314.936648] [<ffffffff811a3541>] iterate_supers+0xf1/0x100 [84314.936652] [<ffffffff811d0c45>] sys_sync+0x55/0x90 [84314.936658] [<ffffffff8177ef12>] system_call_fastpath+0x16/0x1b [84314.936660] INFO: lockdep is turned off. [84314.936663] INFO: task btrfs:11955 blocked for more than 120 seconds. [84314.936666] Tainted: G W O 3.12.0-fdm-btrfs-next-16+ #70 [84314.936668] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [84314.936670] btrfs D ffff880541729a88 0 11955 11608 0x00000000 [84314.936674] ffff880541729a38 0000000000000046 ffff8805417299d8 ffffffff810bd8bd [84314.936680] ffff88075430c8a0 ffff880541729fd8 ffff880541729fd8 ffff880541729fd8 [84314.936685] ffffffff81c104e0 ffff88075430c8a0 ffff8804de8b00b8 ffff8804de8b0000 [84314.936690] Call Trace: [84314.936695] [<ffffffff810bd8bd>] ? trace_hardirqs_on+0xd/0x10 [84314.936700] [<ffffffff81774269>] schedule+0x29/0x70 [84314.936717] [<ffffffffa0715815>] btrfs_tree_read_lock+0xd5/0x140 [btrfs] [84314.936721] [<ffffffff810715c0>] ? __init_waitqueue_head+0x60/0x60 [84314.936733] [<ffffffffa06ba201>] btrfs_search_slot+0x7c1/0x930 [btrfs] [84314.936746] [<ffffffffa06bd505>] btrfs_find_item+0x55/0x160 [btrfs] [84314.936763] [<ffffffffa06ff689>] ? free_extent_buffer+0x49/0xc0 [btrfs] [84314.936780] [<ffffffffa073c9ca>] btrfs_ref_to_path+0xba/0x1e0 [btrfs] [84314.936797] [<ffffffffa06f9719>] ? release_extent_buffer+0xb9/0xe0 [btrfs] [84314.936813] [<ffffffffa06ff689>] ? free_extent_buffer+0x49/0xc0 [btrfs] [84314.936830] [<ffffffffa073cb50>] inode_to_path+0x60/0xd0 [btrfs] [84314.936846] [<ffffffffa073d365>] paths_from_inode+0x115/0x3c0 [btrfs] [84314.936851] [<ffffffff8118dd44>] ? kmem_cache_alloc_trace+0x114/0x200 [84314.936868] [<ffffffffa0714494>] btrfs_ioctl+0xf14/0x2030 [btrfs] [84314.936873] [<ffffffff817762db>] ? _raw_spin_unlock+0x2b/0x50 [84314.936877] [<ffffffff8116598f>] ? handle_mm_fault+0x34f/0xb00 [84314.936882] [<ffffffff81075563>] ? up_read+0x23/0x40 [84314.936886] [<ffffffff8177a41c>] ? __do_page_fault+0x20c/0x5a0 [84314.936892] [<ffffffff811b2946>] do_vfs_ioctl+0x96/0x570 [84314.936896] [<ffffffff81776e23>] ? error_sti+0x5/0x6 [84314.936901] [<ffffffff810b71e8>] ? trace_hardirqs_off_caller+0x28/0xd0 [84314.936906] [<ffffffff81776a09>] ? retint_swapgs+0xe/0x13 [84314.936910] [<ffffffff811b2eb1>] SyS_ioctl+0x91/0xb0 [84314.936915] [<ffffffff813eecde>] ? trace_hardirqs_on_thunk+0x3a/0x3f [84314.936920] [<ffffffff8177ef12>] system_call_fastpath+0x16/0x1b [84314.936922] INFO: lockdep is turned off. [84434.866873] INFO: task btrfs-transacti:11921 blocked for more than 120 seconds. [84434.866881] Tainted: G W O 3.12.0-fdm-btrfs-next-16+ #70 [84434.866883] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [84434.866886] btrfs-transacti D ffff880755b6a478 0 11921 2 0x00000000 [84434.866893] ffff8800735b9ce8 0000000000000046 ffff8800735b9c88 ffffffff810bd8bd [84434.866899] ffff8805a1b848a0 ffff8800735b9fd8 ffff8800735b9fd8 ffff8800735b9fd8 [84434.866904] ffffffff81c104e0 ffff8805a1b848a0 ffff880755b6a478 ffff8804cece78f0 [84434.866910] Call Trace: [84434.866920] [<ffffffff810bd8bd>] ? trace_hardirqs_on+0xd/0x10 [84434.866927] [<ffffffff81774269>] schedule+0x29/0x70 [84434.866948] [<ffffffffa06dd2ef>] wait_current_trans.isra.33+0xbf/0x120 [btrfs] [84434.866954] [<ffffffff810715c0>] ? __init_waitqueue_head+0x60/0x60 [84434.866970] [<ffffffffa06dec18>] start_transaction+0x388/0x5a0 [btrfs] [84434.866985] [<ffffffffa06db9b5>] ? transaction_kthread+0xb5/0x280 [btrfs] [84434.866999] [<ffffffffa06dee97>] btrfs_attach_transaction+0x17/0x20 [btrfs] [84434.867012] [<ffffffffa06dba9e>] transaction_kthread+0x19e/0x280 [btrfs] [84434.867026] [<ffffffffa06db900>] ? open_ctree+0x2260/0x2260 [btrfs] [84434.867030] [<ffffffff81070dad>] kthread+0xed/0x100 [84434.867035] [<ffffffff81070cc0>] ? flush_kthread_worker+0x190/0x190 [84434.867040] [<ffffffff8177ee6c>] ret_from_fork+0x7c/0xb0 [84434.867044] [<ffffffff81070cc0>] ? flush_kthread_worker+0x190/0x190 Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2013-12-15 20:43:58 +08:00
eb = btrfs_clone_extent_buffer(path->nodes[0]);
if (!eb) {
ret = -ENOMEM;
break;
}
btrfs_release_path(path);
item = btrfs_item_nr(slot);
iref = btrfs_item_ptr(eb, slot, struct btrfs_inode_ref);
for (cur = 0; cur < btrfs_item_size(eb, item); cur += len) {
name_len = btrfs_inode_ref_name_len(eb, iref);
/* path must be released before calling iterate()! */
btrfs_debug(fs_root->fs_info,
"following ref at offset %u for inode %llu in tree %llu",
cur, found_key.objectid,
fs_root->root_key.objectid);
ret = iterate(parent, name_len,
(unsigned long)(iref + 1), eb, ctx);
if (ret)
break;
len = sizeof(*iref) + name_len;
iref = (struct btrfs_inode_ref *)((char *)iref + len);
}
free_extent_buffer(eb);
}
btrfs_release_path(path);
return ret;
}
static int iterate_inode_extrefs(u64 inum, struct btrfs_root *fs_root,
struct btrfs_path *path,
iterate_irefs_t *iterate, void *ctx)
{
int ret;
int slot;
u64 offset = 0;
u64 parent;
int found = 0;
struct extent_buffer *eb;
struct btrfs_inode_extref *extref;
u32 item_size;
u32 cur_offset;
unsigned long ptr;
while (1) {
ret = btrfs_find_one_extref(fs_root, inum, offset, path, &extref,
&offset);
if (ret < 0)
break;
if (ret) {
ret = found ? 0 : -ENOENT;
break;
}
++found;
slot = path->slots[0];
Btrfs: fix deadlock when iterating inode refs and running delayed inodes While running btrfs/004 from xfstests, after 503 iterations, dmesg reported a deadlock between tasks iterating inode refs and tasks running delayed inodes (during a transaction commit). It turns out that iterating inode refs implies doing one tree search and release all nodes in the path except the leaf node, and then passing that leaf node to btrfs_ref_to_path(), which in turn does another tree search without releasing the lock on the leaf node it received as parameter. This is a problem when other task wants to write to the btree as well and ends up updating the leaf that is read locked - the writer task locks the parent of the leaf and then blocks waiting for the leaf's lock to be released - at the same time, the task executing btrfs_ref_to_path() does a second tree search, without releasing the lock on the first leaf, and wants to access a leaf (the same or another one) that is a child of the same parent, resulting in a deadlock. The trace reported by lockdep follows. [84314.936373] INFO: task fsstress:11930 blocked for more than 120 seconds. [84314.936381] Tainted: G W O 3.12.0-fdm-btrfs-next-16+ #70 [84314.936383] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [84314.936386] fsstress D ffff8806e1bf8000 0 11930 11926 0x00000000 [84314.936393] ffff8804d6d89b78 0000000000000046 ffff8804d6d89b18 ffffffff810bd8bd [84314.936399] ffff8806e1bf8000 ffff8804d6d89fd8 ffff8804d6d89fd8 ffff8804d6d89fd8 [84314.936405] ffff880806308000 ffff8806e1bf8000 ffff8804d6d89c08 ffff8804deb8f190 [84314.936410] Call Trace: [84314.936421] [<ffffffff810bd8bd>] ? trace_hardirqs_on+0xd/0x10 [84314.936428] [<ffffffff81774269>] schedule+0x29/0x70 [84314.936451] [<ffffffffa0715bf5>] btrfs_tree_lock+0x75/0x270 [btrfs] [84314.936457] [<ffffffff810715c0>] ? __init_waitqueue_head+0x60/0x60 [84314.936470] [<ffffffffa06ba231>] btrfs_search_slot+0x7f1/0x930 [btrfs] [84314.936489] [<ffffffffa0731c2a>] ? __btrfs_run_delayed_items+0x13a/0x1e0 [btrfs] [84314.936504] [<ffffffffa06d2e1f>] btrfs_lookup_inode+0x2f/0xa0 [btrfs] [84314.936510] [<ffffffff810bd6ef>] ? trace_hardirqs_on_caller+0x1f/0x1e0 [84314.936528] [<ffffffffa073173c>] __btrfs_update_delayed_inode+0x4c/0x1d0 [btrfs] [84314.936543] [<ffffffffa0731c2a>] ? __btrfs_run_delayed_items+0x13a/0x1e0 [btrfs] [84314.936558] [<ffffffffa0731c2a>] ? __btrfs_run_delayed_items+0x13a/0x1e0 [btrfs] [84314.936573] [<ffffffffa0731c82>] __btrfs_run_delayed_items+0x192/0x1e0 [btrfs] [84314.936589] [<ffffffffa0731d03>] btrfs_run_delayed_items+0x13/0x20 [btrfs] [84314.936604] [<ffffffffa06dbcd4>] btrfs_flush_all_pending_stuffs+0x24/0x80 [btrfs] [84314.936620] [<ffffffffa06ddc13>] btrfs_commit_transaction+0x223/0xa20 [btrfs] [84314.936630] [<ffffffffa06ae5ae>] btrfs_sync_fs+0x6e/0x110 [btrfs] [84314.936635] [<ffffffff811d0b50>] ? __sync_filesystem+0x60/0x60 [84314.936639] [<ffffffff811d0b50>] ? __sync_filesystem+0x60/0x60 [84314.936643] [<ffffffff811d0b70>] sync_fs_one_sb+0x20/0x30 [84314.936648] [<ffffffff811a3541>] iterate_supers+0xf1/0x100 [84314.936652] [<ffffffff811d0c45>] sys_sync+0x55/0x90 [84314.936658] [<ffffffff8177ef12>] system_call_fastpath+0x16/0x1b [84314.936660] INFO: lockdep is turned off. [84314.936663] INFO: task btrfs:11955 blocked for more than 120 seconds. [84314.936666] Tainted: G W O 3.12.0-fdm-btrfs-next-16+ #70 [84314.936668] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [84314.936670] btrfs D ffff880541729a88 0 11955 11608 0x00000000 [84314.936674] ffff880541729a38 0000000000000046 ffff8805417299d8 ffffffff810bd8bd [84314.936680] ffff88075430c8a0 ffff880541729fd8 ffff880541729fd8 ffff880541729fd8 [84314.936685] ffffffff81c104e0 ffff88075430c8a0 ffff8804de8b00b8 ffff8804de8b0000 [84314.936690] Call Trace: [84314.936695] [<ffffffff810bd8bd>] ? trace_hardirqs_on+0xd/0x10 [84314.936700] [<ffffffff81774269>] schedule+0x29/0x70 [84314.936717] [<ffffffffa0715815>] btrfs_tree_read_lock+0xd5/0x140 [btrfs] [84314.936721] [<ffffffff810715c0>] ? __init_waitqueue_head+0x60/0x60 [84314.936733] [<ffffffffa06ba201>] btrfs_search_slot+0x7c1/0x930 [btrfs] [84314.936746] [<ffffffffa06bd505>] btrfs_find_item+0x55/0x160 [btrfs] [84314.936763] [<ffffffffa06ff689>] ? free_extent_buffer+0x49/0xc0 [btrfs] [84314.936780] [<ffffffffa073c9ca>] btrfs_ref_to_path+0xba/0x1e0 [btrfs] [84314.936797] [<ffffffffa06f9719>] ? release_extent_buffer+0xb9/0xe0 [btrfs] [84314.936813] [<ffffffffa06ff689>] ? free_extent_buffer+0x49/0xc0 [btrfs] [84314.936830] [<ffffffffa073cb50>] inode_to_path+0x60/0xd0 [btrfs] [84314.936846] [<ffffffffa073d365>] paths_from_inode+0x115/0x3c0 [btrfs] [84314.936851] [<ffffffff8118dd44>] ? kmem_cache_alloc_trace+0x114/0x200 [84314.936868] [<ffffffffa0714494>] btrfs_ioctl+0xf14/0x2030 [btrfs] [84314.936873] [<ffffffff817762db>] ? _raw_spin_unlock+0x2b/0x50 [84314.936877] [<ffffffff8116598f>] ? handle_mm_fault+0x34f/0xb00 [84314.936882] [<ffffffff81075563>] ? up_read+0x23/0x40 [84314.936886] [<ffffffff8177a41c>] ? __do_page_fault+0x20c/0x5a0 [84314.936892] [<ffffffff811b2946>] do_vfs_ioctl+0x96/0x570 [84314.936896] [<ffffffff81776e23>] ? error_sti+0x5/0x6 [84314.936901] [<ffffffff810b71e8>] ? trace_hardirqs_off_caller+0x28/0xd0 [84314.936906] [<ffffffff81776a09>] ? retint_swapgs+0xe/0x13 [84314.936910] [<ffffffff811b2eb1>] SyS_ioctl+0x91/0xb0 [84314.936915] [<ffffffff813eecde>] ? trace_hardirqs_on_thunk+0x3a/0x3f [84314.936920] [<ffffffff8177ef12>] system_call_fastpath+0x16/0x1b [84314.936922] INFO: lockdep is turned off. [84434.866873] INFO: task btrfs-transacti:11921 blocked for more than 120 seconds. [84434.866881] Tainted: G W O 3.12.0-fdm-btrfs-next-16+ #70 [84434.866883] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [84434.866886] btrfs-transacti D ffff880755b6a478 0 11921 2 0x00000000 [84434.866893] ffff8800735b9ce8 0000000000000046 ffff8800735b9c88 ffffffff810bd8bd [84434.866899] ffff8805a1b848a0 ffff8800735b9fd8 ffff8800735b9fd8 ffff8800735b9fd8 [84434.866904] ffffffff81c104e0 ffff8805a1b848a0 ffff880755b6a478 ffff8804cece78f0 [84434.866910] Call Trace: [84434.866920] [<ffffffff810bd8bd>] ? trace_hardirqs_on+0xd/0x10 [84434.866927] [<ffffffff81774269>] schedule+0x29/0x70 [84434.866948] [<ffffffffa06dd2ef>] wait_current_trans.isra.33+0xbf/0x120 [btrfs] [84434.866954] [<ffffffff810715c0>] ? __init_waitqueue_head+0x60/0x60 [84434.866970] [<ffffffffa06dec18>] start_transaction+0x388/0x5a0 [btrfs] [84434.866985] [<ffffffffa06db9b5>] ? transaction_kthread+0xb5/0x280 [btrfs] [84434.866999] [<ffffffffa06dee97>] btrfs_attach_transaction+0x17/0x20 [btrfs] [84434.867012] [<ffffffffa06dba9e>] transaction_kthread+0x19e/0x280 [btrfs] [84434.867026] [<ffffffffa06db900>] ? open_ctree+0x2260/0x2260 [btrfs] [84434.867030] [<ffffffff81070dad>] kthread+0xed/0x100 [84434.867035] [<ffffffff81070cc0>] ? flush_kthread_worker+0x190/0x190 [84434.867040] [<ffffffff8177ee6c>] ret_from_fork+0x7c/0xb0 [84434.867044] [<ffffffff81070cc0>] ? flush_kthread_worker+0x190/0x190 Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Chris Mason <clm@fb.com>
2013-12-15 20:43:58 +08:00
eb = btrfs_clone_extent_buffer(path->nodes[0]);
if (!eb) {
ret = -ENOMEM;
break;
}
btrfs_release_path(path);
item_size = btrfs_item_size_nr(eb, slot);
ptr = btrfs_item_ptr_offset(eb, slot);
cur_offset = 0;
while (cur_offset < item_size) {
u32 name_len;
extref = (struct btrfs_inode_extref *)(ptr + cur_offset);
parent = btrfs_inode_extref_parent(eb, extref);
name_len = btrfs_inode_extref_name_len(eb, extref);
ret = iterate(parent, name_len,
(unsigned long)&extref->name, eb, ctx);
if (ret)
break;
cur_offset += btrfs_inode_extref_name_len(eb, extref);
cur_offset += sizeof(*extref);
}
free_extent_buffer(eb);
offset++;
}
btrfs_release_path(path);
return ret;
}
static int iterate_irefs(u64 inum, struct btrfs_root *fs_root,
struct btrfs_path *path, iterate_irefs_t *iterate,
void *ctx)
{
int ret;
int found_refs = 0;
ret = iterate_inode_refs(inum, fs_root, path, iterate, ctx);
if (!ret)
++found_refs;
else if (ret != -ENOENT)
return ret;
ret = iterate_inode_extrefs(inum, fs_root, path, iterate, ctx);
if (ret == -ENOENT && found_refs)
return 0;
return ret;
}
/*
* returns 0 if the path could be dumped (probably truncated)
* returns <0 in case of an error
*/
static int inode_to_path(u64 inum, u32 name_len, unsigned long name_off,
struct extent_buffer *eb, void *ctx)
{
struct inode_fs_paths *ipath = ctx;
char *fspath;
char *fspath_min;
int i = ipath->fspath->elem_cnt;
const int s_ptr = sizeof(char *);
u32 bytes_left;
bytes_left = ipath->fspath->bytes_left > s_ptr ?
ipath->fspath->bytes_left - s_ptr : 0;
fspath_min = (char *)ipath->fspath->val + (i + 1) * s_ptr;
fspath = btrfs_ref_to_path(ipath->fs_root, ipath->btrfs_path, name_len,
name_off, eb, inum, fspath_min, bytes_left);
if (IS_ERR(fspath))
return PTR_ERR(fspath);
if (fspath > fspath_min) {
ipath->fspath->val[i] = (u64)(unsigned long)fspath;
++ipath->fspath->elem_cnt;
ipath->fspath->bytes_left = fspath - fspath_min;
} else {
++ipath->fspath->elem_missed;
ipath->fspath->bytes_missing += fspath_min - fspath;
ipath->fspath->bytes_left = 0;
}
return 0;
}
/*
* this dumps all file system paths to the inode into the ipath struct, provided
* is has been created large enough. each path is zero-terminated and accessed
* from ipath->fspath->val[i].
* when it returns, there are ipath->fspath->elem_cnt number of paths available
* in ipath->fspath->val[]. when the allocated space wasn't sufficient, the
* number of missed paths is recorded in ipath->fspath->elem_missed, otherwise,
* it's zero. ipath->fspath->bytes_missing holds the number of bytes that would
* have been needed to return all paths.
*/
int paths_from_inode(u64 inum, struct inode_fs_paths *ipath)
{
return iterate_irefs(inum, ipath->fs_root, ipath->btrfs_path,
inode_to_path, ipath);
}
struct btrfs_data_container *init_data_container(u32 total_bytes)
{
struct btrfs_data_container *data;
size_t alloc_bytes;
alloc_bytes = max_t(size_t, total_bytes, sizeof(*data));
data = kvmalloc(alloc_bytes, GFP_KERNEL);
if (!data)
return ERR_PTR(-ENOMEM);
if (total_bytes >= sizeof(*data)) {
data->bytes_left = total_bytes - sizeof(*data);
data->bytes_missing = 0;
} else {
data->bytes_missing = sizeof(*data) - total_bytes;
data->bytes_left = 0;
}
data->elem_cnt = 0;
data->elem_missed = 0;
return data;
}
/*
* allocates space to return multiple file system paths for an inode.
* total_bytes to allocate are passed, note that space usable for actual path
* information will be total_bytes - sizeof(struct inode_fs_paths).
* the returned pointer must be freed with free_ipath() in the end.
*/
struct inode_fs_paths *init_ipath(s32 total_bytes, struct btrfs_root *fs_root,
struct btrfs_path *path)
{
struct inode_fs_paths *ifp;
struct btrfs_data_container *fspath;
fspath = init_data_container(total_bytes);
if (IS_ERR(fspath))
return ERR_CAST(fspath);
ifp = kmalloc(sizeof(*ifp), GFP_KERNEL);
if (!ifp) {
kvfree(fspath);
return ERR_PTR(-ENOMEM);
}
ifp->btrfs_path = path;
ifp->fspath = fspath;
ifp->fs_root = fs_root;
return ifp;
}
void free_ipath(struct inode_fs_paths *ipath)
{
if (!ipath)
return;
kvfree(ipath->fspath);
kfree(ipath);
}