OpenCloudOS-Kernel/drivers/acpi/acpica/tbinstal.c

526 lines
17 KiB
C
Raw Normal View History

/******************************************************************************
*
* Module Name: tbinstal - ACPI table installation and removal
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2015, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <acpi/acpi.h>
#include "accommon.h"
#include "actables.h"
#define _COMPONENT ACPI_TABLES
ACPI_MODULE_NAME("tbinstal")
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
/* Local prototypes */
static u8
acpi_tb_compare_tables(struct acpi_table_desc *table_desc, u32 table_index);
ACPICA: Tables: Clean up split INSTALLED/VALIDATED table state logics. This patch is mainly a naming cleanup to clarify hidden logics, no functional changes. acpi_initialize_tables() is used by Linux to install table addresses for early boot steps. During this stage, table addresses are mapped by early_ioremap() mechanism which is different from the runtime IO mappings. Thus it is not safe for ACPICA to keep mapped pointers in struct acpi_table_desc structure during this stage. In order to support this in ACPICA, table states are divided into 1. "INSTALLED" (where struct acpi_table_desc.Pointer is always NULL) and 2. "VALIDATED" (where struct acpi_table_desc.Pointer is always not NULL). During acpi_initialize_tables(), table state are ensured to be "INSTALLED" but not "VALIDATED". This logic is ensured by the original code in very ambigious way. For example, currently acpi_tb_delete_table() is invoked in some place to perform an uninstallation while it is invoked in other place to perform an invalidation. They happen to work just because no one enters the penalty where the 2 behaviours are not equivalent. The naming cleanups are made in this patch: A. For installation and validation: There is code setting struct acpi_table_desc.Pointer first and delete it immediately to keep the descriptor's state as "INSTALLED" during the installation. This patch implements this in more direct way. After applying it, struct acpi_table_desc.Pointer will never be set in acpi_tb_install_table() and acpi_tb_override_table() as they are the only functions invoked during acpi_initialize_tables(). This is achieved by: 1. Rename acpi_tb_verify_table() to acpi_tb_validate_table() to clarify this change. 2. Rename acpi_tb_table_override() to acpi_tb_override_table() to keep nameing consistencies as other APIs (verb. Table). 3. Stops setting struct acpi_table_desc.Pointer in acpi_tb_install_table() and acpi_tb_table_override(). 4. Introduce acpi_tb_acquire_table() to acquire the table pointer that is not maintained in the struct acpi_table_desc of the global root table list and rewrite acpi_tb_validate_table() using this new function to reduce redundancies. 5. Replace the table pointer using the overridden table pointer in acpi_tb_add_table(). As acpi_tb_add_table() is not invoked during early boot stage, tables returned from this functions should be "VALIDATED". As acpi_tb_override_table() is modified by this patch to return a "INSTALLED" but not "VALIDATED" descriptor, to keep acpi_tb_add_table() unchanged, struct acpi_table_desc.Pointer is filled in acpi_tb_add_table(). B. For invalidation and uninstallation: The original code invalidate table by invoking acpi_tb_delete_table() here and there, but actually this function should only be used to uninstall tables. This can work just because its invocations are equivalent to invalidation in some cases. This patch splits acpi_tb_delete_table() into acpi_tb_invalidate_table() and acpi_tb_uninstall_table() and cleans up the hidden logic using the new APIs. This is achieved by: 1. Rename acpi_tb_delete_table() to acpi_tb_uninstall_table() as it is mainly called before resetting struct acpi_table_desc.Address. Thus the table descriptor is in "not INSTALLED" state. This patch enforces this by setting struct acpi_table_desc.Address to NULL in this function. 2. Introduce acpi_tb_invalidate_table() to be the reversal of acpi_tb_validate_table() and invoke it in acpi_tb_uninstall_table(). 3. Introduce acpi_tb_release_table() to release the table pointer that is not maintained in acpi_gbl_root_table_list and rewrite acpi_tb_invalidate_table() using this new function to reduce redundancies. After cleaning up, the maintainability of the internal APIs are also improved: 1. acpi_tb_acquire_table: Acquire struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 2. acpi_tb_release_table: Release struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 3. acpi_tb_install_table: Make struct acpi_table_desc.Address not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 4. acpi_tb_uninstall_table: Make struct acpi_table_desc.Address NULL according to ACPI_TABLE_ORIGIN_xxx flags. 5. acpi_tb_validate_table: Make struct acpi_table_desc.Pointer not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 6. acpi_tb_invalidate_table: Make struct acpi_table_desc.Pointer NULL according to ACPI_TABLE_ORIGIN_xxx flags. 7. acpi_tb_override_table: Replace struct acpi_table_desc.Address and struct acpi_table_desc.Flags. It only happens in "INSTALLED" state. The patch has been unit tested in acpi_exec by: 1. Initializing; 2. Executing exc_tbl ASLTS tests; 3. Executing "Load" command. So that all original acpi_tb_install_table() and acpi_tb_override_table() invocations are covered. Known Issues: 1. Cleanup acpi_tb_add_table() to Kill Code Redundancies Current implementation in acpi_tb_add_table() is not very clean, further patch can rewrite acpi_tb_add_table() with ordered acpi_tb_install_table(), acpi_tb_override_table() and acpi_tb_validate_table(). It is not done in this patch so that it is easy for the reviewers to understand the changes in this patch. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:42 +08:00
/*******************************************************************************
*
* FUNCTION: acpi_tb_compare_tables
ACPICA: Tables: Clean up split INSTALLED/VALIDATED table state logics. This patch is mainly a naming cleanup to clarify hidden logics, no functional changes. acpi_initialize_tables() is used by Linux to install table addresses for early boot steps. During this stage, table addresses are mapped by early_ioremap() mechanism which is different from the runtime IO mappings. Thus it is not safe for ACPICA to keep mapped pointers in struct acpi_table_desc structure during this stage. In order to support this in ACPICA, table states are divided into 1. "INSTALLED" (where struct acpi_table_desc.Pointer is always NULL) and 2. "VALIDATED" (where struct acpi_table_desc.Pointer is always not NULL). During acpi_initialize_tables(), table state are ensured to be "INSTALLED" but not "VALIDATED". This logic is ensured by the original code in very ambigious way. For example, currently acpi_tb_delete_table() is invoked in some place to perform an uninstallation while it is invoked in other place to perform an invalidation. They happen to work just because no one enters the penalty where the 2 behaviours are not equivalent. The naming cleanups are made in this patch: A. For installation and validation: There is code setting struct acpi_table_desc.Pointer first and delete it immediately to keep the descriptor's state as "INSTALLED" during the installation. This patch implements this in more direct way. After applying it, struct acpi_table_desc.Pointer will never be set in acpi_tb_install_table() and acpi_tb_override_table() as they are the only functions invoked during acpi_initialize_tables(). This is achieved by: 1. Rename acpi_tb_verify_table() to acpi_tb_validate_table() to clarify this change. 2. Rename acpi_tb_table_override() to acpi_tb_override_table() to keep nameing consistencies as other APIs (verb. Table). 3. Stops setting struct acpi_table_desc.Pointer in acpi_tb_install_table() and acpi_tb_table_override(). 4. Introduce acpi_tb_acquire_table() to acquire the table pointer that is not maintained in the struct acpi_table_desc of the global root table list and rewrite acpi_tb_validate_table() using this new function to reduce redundancies. 5. Replace the table pointer using the overridden table pointer in acpi_tb_add_table(). As acpi_tb_add_table() is not invoked during early boot stage, tables returned from this functions should be "VALIDATED". As acpi_tb_override_table() is modified by this patch to return a "INSTALLED" but not "VALIDATED" descriptor, to keep acpi_tb_add_table() unchanged, struct acpi_table_desc.Pointer is filled in acpi_tb_add_table(). B. For invalidation and uninstallation: The original code invalidate table by invoking acpi_tb_delete_table() here and there, but actually this function should only be used to uninstall tables. This can work just because its invocations are equivalent to invalidation in some cases. This patch splits acpi_tb_delete_table() into acpi_tb_invalidate_table() and acpi_tb_uninstall_table() and cleans up the hidden logic using the new APIs. This is achieved by: 1. Rename acpi_tb_delete_table() to acpi_tb_uninstall_table() as it is mainly called before resetting struct acpi_table_desc.Address. Thus the table descriptor is in "not INSTALLED" state. This patch enforces this by setting struct acpi_table_desc.Address to NULL in this function. 2. Introduce acpi_tb_invalidate_table() to be the reversal of acpi_tb_validate_table() and invoke it in acpi_tb_uninstall_table(). 3. Introduce acpi_tb_release_table() to release the table pointer that is not maintained in acpi_gbl_root_table_list and rewrite acpi_tb_invalidate_table() using this new function to reduce redundancies. After cleaning up, the maintainability of the internal APIs are also improved: 1. acpi_tb_acquire_table: Acquire struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 2. acpi_tb_release_table: Release struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 3. acpi_tb_install_table: Make struct acpi_table_desc.Address not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 4. acpi_tb_uninstall_table: Make struct acpi_table_desc.Address NULL according to ACPI_TABLE_ORIGIN_xxx flags. 5. acpi_tb_validate_table: Make struct acpi_table_desc.Pointer not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 6. acpi_tb_invalidate_table: Make struct acpi_table_desc.Pointer NULL according to ACPI_TABLE_ORIGIN_xxx flags. 7. acpi_tb_override_table: Replace struct acpi_table_desc.Address and struct acpi_table_desc.Flags. It only happens in "INSTALLED" state. The patch has been unit tested in acpi_exec by: 1. Initializing; 2. Executing exc_tbl ASLTS tests; 3. Executing "Load" command. So that all original acpi_tb_install_table() and acpi_tb_override_table() invocations are covered. Known Issues: 1. Cleanup acpi_tb_add_table() to Kill Code Redundancies Current implementation in acpi_tb_add_table() is not very clean, further patch can rewrite acpi_tb_add_table() with ordered acpi_tb_install_table(), acpi_tb_override_table() and acpi_tb_validate_table(). It is not done in this patch so that it is easy for the reviewers to understand the changes in this patch. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:42 +08:00
*
* PARAMETERS: table_desc - Table 1 descriptor to be compared
* table_index - Index of table 2 to be compared
ACPICA: Tables: Clean up split INSTALLED/VALIDATED table state logics. This patch is mainly a naming cleanup to clarify hidden logics, no functional changes. acpi_initialize_tables() is used by Linux to install table addresses for early boot steps. During this stage, table addresses are mapped by early_ioremap() mechanism which is different from the runtime IO mappings. Thus it is not safe for ACPICA to keep mapped pointers in struct acpi_table_desc structure during this stage. In order to support this in ACPICA, table states are divided into 1. "INSTALLED" (where struct acpi_table_desc.Pointer is always NULL) and 2. "VALIDATED" (where struct acpi_table_desc.Pointer is always not NULL). During acpi_initialize_tables(), table state are ensured to be "INSTALLED" but not "VALIDATED". This logic is ensured by the original code in very ambigious way. For example, currently acpi_tb_delete_table() is invoked in some place to perform an uninstallation while it is invoked in other place to perform an invalidation. They happen to work just because no one enters the penalty where the 2 behaviours are not equivalent. The naming cleanups are made in this patch: A. For installation and validation: There is code setting struct acpi_table_desc.Pointer first and delete it immediately to keep the descriptor's state as "INSTALLED" during the installation. This patch implements this in more direct way. After applying it, struct acpi_table_desc.Pointer will never be set in acpi_tb_install_table() and acpi_tb_override_table() as they are the only functions invoked during acpi_initialize_tables(). This is achieved by: 1. Rename acpi_tb_verify_table() to acpi_tb_validate_table() to clarify this change. 2. Rename acpi_tb_table_override() to acpi_tb_override_table() to keep nameing consistencies as other APIs (verb. Table). 3. Stops setting struct acpi_table_desc.Pointer in acpi_tb_install_table() and acpi_tb_table_override(). 4. Introduce acpi_tb_acquire_table() to acquire the table pointer that is not maintained in the struct acpi_table_desc of the global root table list and rewrite acpi_tb_validate_table() using this new function to reduce redundancies. 5. Replace the table pointer using the overridden table pointer in acpi_tb_add_table(). As acpi_tb_add_table() is not invoked during early boot stage, tables returned from this functions should be "VALIDATED". As acpi_tb_override_table() is modified by this patch to return a "INSTALLED" but not "VALIDATED" descriptor, to keep acpi_tb_add_table() unchanged, struct acpi_table_desc.Pointer is filled in acpi_tb_add_table(). B. For invalidation and uninstallation: The original code invalidate table by invoking acpi_tb_delete_table() here and there, but actually this function should only be used to uninstall tables. This can work just because its invocations are equivalent to invalidation in some cases. This patch splits acpi_tb_delete_table() into acpi_tb_invalidate_table() and acpi_tb_uninstall_table() and cleans up the hidden logic using the new APIs. This is achieved by: 1. Rename acpi_tb_delete_table() to acpi_tb_uninstall_table() as it is mainly called before resetting struct acpi_table_desc.Address. Thus the table descriptor is in "not INSTALLED" state. This patch enforces this by setting struct acpi_table_desc.Address to NULL in this function. 2. Introduce acpi_tb_invalidate_table() to be the reversal of acpi_tb_validate_table() and invoke it in acpi_tb_uninstall_table(). 3. Introduce acpi_tb_release_table() to release the table pointer that is not maintained in acpi_gbl_root_table_list and rewrite acpi_tb_invalidate_table() using this new function to reduce redundancies. After cleaning up, the maintainability of the internal APIs are also improved: 1. acpi_tb_acquire_table: Acquire struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 2. acpi_tb_release_table: Release struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 3. acpi_tb_install_table: Make struct acpi_table_desc.Address not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 4. acpi_tb_uninstall_table: Make struct acpi_table_desc.Address NULL according to ACPI_TABLE_ORIGIN_xxx flags. 5. acpi_tb_validate_table: Make struct acpi_table_desc.Pointer not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 6. acpi_tb_invalidate_table: Make struct acpi_table_desc.Pointer NULL according to ACPI_TABLE_ORIGIN_xxx flags. 7. acpi_tb_override_table: Replace struct acpi_table_desc.Address and struct acpi_table_desc.Flags. It only happens in "INSTALLED" state. The patch has been unit tested in acpi_exec by: 1. Initializing; 2. Executing exc_tbl ASLTS tests; 3. Executing "Load" command. So that all original acpi_tb_install_table() and acpi_tb_override_table() invocations are covered. Known Issues: 1. Cleanup acpi_tb_add_table() to Kill Code Redundancies Current implementation in acpi_tb_add_table() is not very clean, further patch can rewrite acpi_tb_add_table() with ordered acpi_tb_install_table(), acpi_tb_override_table() and acpi_tb_validate_table(). It is not done in this patch so that it is easy for the reviewers to understand the changes in this patch. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:42 +08:00
*
* RETURN: TRUE if both tables are identical.
ACPICA: Tables: Clean up split INSTALLED/VALIDATED table state logics. This patch is mainly a naming cleanup to clarify hidden logics, no functional changes. acpi_initialize_tables() is used by Linux to install table addresses for early boot steps. During this stage, table addresses are mapped by early_ioremap() mechanism which is different from the runtime IO mappings. Thus it is not safe for ACPICA to keep mapped pointers in struct acpi_table_desc structure during this stage. In order to support this in ACPICA, table states are divided into 1. "INSTALLED" (where struct acpi_table_desc.Pointer is always NULL) and 2. "VALIDATED" (where struct acpi_table_desc.Pointer is always not NULL). During acpi_initialize_tables(), table state are ensured to be "INSTALLED" but not "VALIDATED". This logic is ensured by the original code in very ambigious way. For example, currently acpi_tb_delete_table() is invoked in some place to perform an uninstallation while it is invoked in other place to perform an invalidation. They happen to work just because no one enters the penalty where the 2 behaviours are not equivalent. The naming cleanups are made in this patch: A. For installation and validation: There is code setting struct acpi_table_desc.Pointer first and delete it immediately to keep the descriptor's state as "INSTALLED" during the installation. This patch implements this in more direct way. After applying it, struct acpi_table_desc.Pointer will never be set in acpi_tb_install_table() and acpi_tb_override_table() as they are the only functions invoked during acpi_initialize_tables(). This is achieved by: 1. Rename acpi_tb_verify_table() to acpi_tb_validate_table() to clarify this change. 2. Rename acpi_tb_table_override() to acpi_tb_override_table() to keep nameing consistencies as other APIs (verb. Table). 3. Stops setting struct acpi_table_desc.Pointer in acpi_tb_install_table() and acpi_tb_table_override(). 4. Introduce acpi_tb_acquire_table() to acquire the table pointer that is not maintained in the struct acpi_table_desc of the global root table list and rewrite acpi_tb_validate_table() using this new function to reduce redundancies. 5. Replace the table pointer using the overridden table pointer in acpi_tb_add_table(). As acpi_tb_add_table() is not invoked during early boot stage, tables returned from this functions should be "VALIDATED". As acpi_tb_override_table() is modified by this patch to return a "INSTALLED" but not "VALIDATED" descriptor, to keep acpi_tb_add_table() unchanged, struct acpi_table_desc.Pointer is filled in acpi_tb_add_table(). B. For invalidation and uninstallation: The original code invalidate table by invoking acpi_tb_delete_table() here and there, but actually this function should only be used to uninstall tables. This can work just because its invocations are equivalent to invalidation in some cases. This patch splits acpi_tb_delete_table() into acpi_tb_invalidate_table() and acpi_tb_uninstall_table() and cleans up the hidden logic using the new APIs. This is achieved by: 1. Rename acpi_tb_delete_table() to acpi_tb_uninstall_table() as it is mainly called before resetting struct acpi_table_desc.Address. Thus the table descriptor is in "not INSTALLED" state. This patch enforces this by setting struct acpi_table_desc.Address to NULL in this function. 2. Introduce acpi_tb_invalidate_table() to be the reversal of acpi_tb_validate_table() and invoke it in acpi_tb_uninstall_table(). 3. Introduce acpi_tb_release_table() to release the table pointer that is not maintained in acpi_gbl_root_table_list and rewrite acpi_tb_invalidate_table() using this new function to reduce redundancies. After cleaning up, the maintainability of the internal APIs are also improved: 1. acpi_tb_acquire_table: Acquire struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 2. acpi_tb_release_table: Release struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 3. acpi_tb_install_table: Make struct acpi_table_desc.Address not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 4. acpi_tb_uninstall_table: Make struct acpi_table_desc.Address NULL according to ACPI_TABLE_ORIGIN_xxx flags. 5. acpi_tb_validate_table: Make struct acpi_table_desc.Pointer not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 6. acpi_tb_invalidate_table: Make struct acpi_table_desc.Pointer NULL according to ACPI_TABLE_ORIGIN_xxx flags. 7. acpi_tb_override_table: Replace struct acpi_table_desc.Address and struct acpi_table_desc.Flags. It only happens in "INSTALLED" state. The patch has been unit tested in acpi_exec by: 1. Initializing; 2. Executing exc_tbl ASLTS tests; 3. Executing "Load" command. So that all original acpi_tb_install_table() and acpi_tb_override_table() invocations are covered. Known Issues: 1. Cleanup acpi_tb_add_table() to Kill Code Redundancies Current implementation in acpi_tb_add_table() is not very clean, further patch can rewrite acpi_tb_add_table() with ordered acpi_tb_install_table(), acpi_tb_override_table() and acpi_tb_validate_table(). It is not done in this patch so that it is easy for the reviewers to understand the changes in this patch. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:42 +08:00
*
* DESCRIPTION: This function compares a table with another table that has
* already been installed in the root table list.
ACPICA: Tables: Clean up split INSTALLED/VALIDATED table state logics. This patch is mainly a naming cleanup to clarify hidden logics, no functional changes. acpi_initialize_tables() is used by Linux to install table addresses for early boot steps. During this stage, table addresses are mapped by early_ioremap() mechanism which is different from the runtime IO mappings. Thus it is not safe for ACPICA to keep mapped pointers in struct acpi_table_desc structure during this stage. In order to support this in ACPICA, table states are divided into 1. "INSTALLED" (where struct acpi_table_desc.Pointer is always NULL) and 2. "VALIDATED" (where struct acpi_table_desc.Pointer is always not NULL). During acpi_initialize_tables(), table state are ensured to be "INSTALLED" but not "VALIDATED". This logic is ensured by the original code in very ambigious way. For example, currently acpi_tb_delete_table() is invoked in some place to perform an uninstallation while it is invoked in other place to perform an invalidation. They happen to work just because no one enters the penalty where the 2 behaviours are not equivalent. The naming cleanups are made in this patch: A. For installation and validation: There is code setting struct acpi_table_desc.Pointer first and delete it immediately to keep the descriptor's state as "INSTALLED" during the installation. This patch implements this in more direct way. After applying it, struct acpi_table_desc.Pointer will never be set in acpi_tb_install_table() and acpi_tb_override_table() as they are the only functions invoked during acpi_initialize_tables(). This is achieved by: 1. Rename acpi_tb_verify_table() to acpi_tb_validate_table() to clarify this change. 2. Rename acpi_tb_table_override() to acpi_tb_override_table() to keep nameing consistencies as other APIs (verb. Table). 3. Stops setting struct acpi_table_desc.Pointer in acpi_tb_install_table() and acpi_tb_table_override(). 4. Introduce acpi_tb_acquire_table() to acquire the table pointer that is not maintained in the struct acpi_table_desc of the global root table list and rewrite acpi_tb_validate_table() using this new function to reduce redundancies. 5. Replace the table pointer using the overridden table pointer in acpi_tb_add_table(). As acpi_tb_add_table() is not invoked during early boot stage, tables returned from this functions should be "VALIDATED". As acpi_tb_override_table() is modified by this patch to return a "INSTALLED" but not "VALIDATED" descriptor, to keep acpi_tb_add_table() unchanged, struct acpi_table_desc.Pointer is filled in acpi_tb_add_table(). B. For invalidation and uninstallation: The original code invalidate table by invoking acpi_tb_delete_table() here and there, but actually this function should only be used to uninstall tables. This can work just because its invocations are equivalent to invalidation in some cases. This patch splits acpi_tb_delete_table() into acpi_tb_invalidate_table() and acpi_tb_uninstall_table() and cleans up the hidden logic using the new APIs. This is achieved by: 1. Rename acpi_tb_delete_table() to acpi_tb_uninstall_table() as it is mainly called before resetting struct acpi_table_desc.Address. Thus the table descriptor is in "not INSTALLED" state. This patch enforces this by setting struct acpi_table_desc.Address to NULL in this function. 2. Introduce acpi_tb_invalidate_table() to be the reversal of acpi_tb_validate_table() and invoke it in acpi_tb_uninstall_table(). 3. Introduce acpi_tb_release_table() to release the table pointer that is not maintained in acpi_gbl_root_table_list and rewrite acpi_tb_invalidate_table() using this new function to reduce redundancies. After cleaning up, the maintainability of the internal APIs are also improved: 1. acpi_tb_acquire_table: Acquire struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 2. acpi_tb_release_table: Release struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 3. acpi_tb_install_table: Make struct acpi_table_desc.Address not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 4. acpi_tb_uninstall_table: Make struct acpi_table_desc.Address NULL according to ACPI_TABLE_ORIGIN_xxx flags. 5. acpi_tb_validate_table: Make struct acpi_table_desc.Pointer not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 6. acpi_tb_invalidate_table: Make struct acpi_table_desc.Pointer NULL according to ACPI_TABLE_ORIGIN_xxx flags. 7. acpi_tb_override_table: Replace struct acpi_table_desc.Address and struct acpi_table_desc.Flags. It only happens in "INSTALLED" state. The patch has been unit tested in acpi_exec by: 1. Initializing; 2. Executing exc_tbl ASLTS tests; 3. Executing "Load" command. So that all original acpi_tb_install_table() and acpi_tb_override_table() invocations are covered. Known Issues: 1. Cleanup acpi_tb_add_table() to Kill Code Redundancies Current implementation in acpi_tb_add_table() is not very clean, further patch can rewrite acpi_tb_add_table() with ordered acpi_tb_install_table(), acpi_tb_override_table() and acpi_tb_validate_table(). It is not done in this patch so that it is easy for the reviewers to understand the changes in this patch. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:42 +08:00
*
******************************************************************************/
static u8
acpi_tb_compare_tables(struct acpi_table_desc *table_desc, u32 table_index)
{
acpi_status status = AE_OK;
u8 is_identical;
struct acpi_table_header *table;
u32 table_length;
u8 table_flags;
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
status =
acpi_tb_acquire_table(&acpi_gbl_root_table_list.tables[table_index],
&table, &table_length, &table_flags);
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
if (ACPI_FAILURE(status)) {
return (FALSE);
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
}
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
/*
* Check for a table match on the entire table length,
* not just the header.
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
*/
is_identical = (u8)((table_desc->length != table_length ||
ACPI_MEMCMP(table_desc->pointer, table,
table_length)) ? FALSE : TRUE);
/* Release the acquired table */
acpi_tb_release_table(table, table_length, table_flags);
return (is_identical);
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
}
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
/*******************************************************************************
*
* FUNCTION: acpi_tb_install_table_with_override
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
*
* PARAMETERS: table_index - Index into root table array
* new_table_desc - New table descriptor to install
* override - Whether override should be performed
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
*
* RETURN: None
*
* DESCRIPTION: Install an ACPI table into the global data structure. The
* table override mechanism is called to allow the host
* OS to replace any table before it is installed in the root
* table array.
*
******************************************************************************/
void
acpi_tb_install_table_with_override(u32 table_index,
struct acpi_table_desc *new_table_desc,
u8 override)
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
{
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
if (table_index >= acpi_gbl_root_table_list.current_table_count) {
return;
}
/*
* ACPI Table Override:
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
*
* Before we install the table, let the host OS override it with a new
* one if desired. Any table within the RSDT/XSDT can be replaced,
* including the DSDT which is pointed to by the FADT.
*/
if (override) {
acpi_tb_override_table(new_table_desc);
}
ACPICA: Tables: Clean up split INSTALLED/VALIDATED table state logics. This patch is mainly a naming cleanup to clarify hidden logics, no functional changes. acpi_initialize_tables() is used by Linux to install table addresses for early boot steps. During this stage, table addresses are mapped by early_ioremap() mechanism which is different from the runtime IO mappings. Thus it is not safe for ACPICA to keep mapped pointers in struct acpi_table_desc structure during this stage. In order to support this in ACPICA, table states are divided into 1. "INSTALLED" (where struct acpi_table_desc.Pointer is always NULL) and 2. "VALIDATED" (where struct acpi_table_desc.Pointer is always not NULL). During acpi_initialize_tables(), table state are ensured to be "INSTALLED" but not "VALIDATED". This logic is ensured by the original code in very ambigious way. For example, currently acpi_tb_delete_table() is invoked in some place to perform an uninstallation while it is invoked in other place to perform an invalidation. They happen to work just because no one enters the penalty where the 2 behaviours are not equivalent. The naming cleanups are made in this patch: A. For installation and validation: There is code setting struct acpi_table_desc.Pointer first and delete it immediately to keep the descriptor's state as "INSTALLED" during the installation. This patch implements this in more direct way. After applying it, struct acpi_table_desc.Pointer will never be set in acpi_tb_install_table() and acpi_tb_override_table() as they are the only functions invoked during acpi_initialize_tables(). This is achieved by: 1. Rename acpi_tb_verify_table() to acpi_tb_validate_table() to clarify this change. 2. Rename acpi_tb_table_override() to acpi_tb_override_table() to keep nameing consistencies as other APIs (verb. Table). 3. Stops setting struct acpi_table_desc.Pointer in acpi_tb_install_table() and acpi_tb_table_override(). 4. Introduce acpi_tb_acquire_table() to acquire the table pointer that is not maintained in the struct acpi_table_desc of the global root table list and rewrite acpi_tb_validate_table() using this new function to reduce redundancies. 5. Replace the table pointer using the overridden table pointer in acpi_tb_add_table(). As acpi_tb_add_table() is not invoked during early boot stage, tables returned from this functions should be "VALIDATED". As acpi_tb_override_table() is modified by this patch to return a "INSTALLED" but not "VALIDATED" descriptor, to keep acpi_tb_add_table() unchanged, struct acpi_table_desc.Pointer is filled in acpi_tb_add_table(). B. For invalidation and uninstallation: The original code invalidate table by invoking acpi_tb_delete_table() here and there, but actually this function should only be used to uninstall tables. This can work just because its invocations are equivalent to invalidation in some cases. This patch splits acpi_tb_delete_table() into acpi_tb_invalidate_table() and acpi_tb_uninstall_table() and cleans up the hidden logic using the new APIs. This is achieved by: 1. Rename acpi_tb_delete_table() to acpi_tb_uninstall_table() as it is mainly called before resetting struct acpi_table_desc.Address. Thus the table descriptor is in "not INSTALLED" state. This patch enforces this by setting struct acpi_table_desc.Address to NULL in this function. 2. Introduce acpi_tb_invalidate_table() to be the reversal of acpi_tb_validate_table() and invoke it in acpi_tb_uninstall_table(). 3. Introduce acpi_tb_release_table() to release the table pointer that is not maintained in acpi_gbl_root_table_list and rewrite acpi_tb_invalidate_table() using this new function to reduce redundancies. After cleaning up, the maintainability of the internal APIs are also improved: 1. acpi_tb_acquire_table: Acquire struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 2. acpi_tb_release_table: Release struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 3. acpi_tb_install_table: Make struct acpi_table_desc.Address not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 4. acpi_tb_uninstall_table: Make struct acpi_table_desc.Address NULL according to ACPI_TABLE_ORIGIN_xxx flags. 5. acpi_tb_validate_table: Make struct acpi_table_desc.Pointer not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 6. acpi_tb_invalidate_table: Make struct acpi_table_desc.Pointer NULL according to ACPI_TABLE_ORIGIN_xxx flags. 7. acpi_tb_override_table: Replace struct acpi_table_desc.Address and struct acpi_table_desc.Flags. It only happens in "INSTALLED" state. The patch has been unit tested in acpi_exec by: 1. Initializing; 2. Executing exc_tbl ASLTS tests; 3. Executing "Load" command. So that all original acpi_tb_install_table() and acpi_tb_override_table() invocations are covered. Known Issues: 1. Cleanup acpi_tb_add_table() to Kill Code Redundancies Current implementation in acpi_tb_add_table() is not very clean, further patch can rewrite acpi_tb_add_table() with ordered acpi_tb_install_table(), acpi_tb_override_table() and acpi_tb_validate_table(). It is not done in this patch so that it is easy for the reviewers to understand the changes in this patch. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:42 +08:00
acpi_tb_init_table_descriptor(&acpi_gbl_root_table_list.
tables[table_index],
new_table_desc->address,
new_table_desc->flags,
new_table_desc->pointer);
ACPICA: Tables: Clean up split INSTALLED/VALIDATED table state logics. This patch is mainly a naming cleanup to clarify hidden logics, no functional changes. acpi_initialize_tables() is used by Linux to install table addresses for early boot steps. During this stage, table addresses are mapped by early_ioremap() mechanism which is different from the runtime IO mappings. Thus it is not safe for ACPICA to keep mapped pointers in struct acpi_table_desc structure during this stage. In order to support this in ACPICA, table states are divided into 1. "INSTALLED" (where struct acpi_table_desc.Pointer is always NULL) and 2. "VALIDATED" (where struct acpi_table_desc.Pointer is always not NULL). During acpi_initialize_tables(), table state are ensured to be "INSTALLED" but not "VALIDATED". This logic is ensured by the original code in very ambigious way. For example, currently acpi_tb_delete_table() is invoked in some place to perform an uninstallation while it is invoked in other place to perform an invalidation. They happen to work just because no one enters the penalty where the 2 behaviours are not equivalent. The naming cleanups are made in this patch: A. For installation and validation: There is code setting struct acpi_table_desc.Pointer first and delete it immediately to keep the descriptor's state as "INSTALLED" during the installation. This patch implements this in more direct way. After applying it, struct acpi_table_desc.Pointer will never be set in acpi_tb_install_table() and acpi_tb_override_table() as they are the only functions invoked during acpi_initialize_tables(). This is achieved by: 1. Rename acpi_tb_verify_table() to acpi_tb_validate_table() to clarify this change. 2. Rename acpi_tb_table_override() to acpi_tb_override_table() to keep nameing consistencies as other APIs (verb. Table). 3. Stops setting struct acpi_table_desc.Pointer in acpi_tb_install_table() and acpi_tb_table_override(). 4. Introduce acpi_tb_acquire_table() to acquire the table pointer that is not maintained in the struct acpi_table_desc of the global root table list and rewrite acpi_tb_validate_table() using this new function to reduce redundancies. 5. Replace the table pointer using the overridden table pointer in acpi_tb_add_table(). As acpi_tb_add_table() is not invoked during early boot stage, tables returned from this functions should be "VALIDATED". As acpi_tb_override_table() is modified by this patch to return a "INSTALLED" but not "VALIDATED" descriptor, to keep acpi_tb_add_table() unchanged, struct acpi_table_desc.Pointer is filled in acpi_tb_add_table(). B. For invalidation and uninstallation: The original code invalidate table by invoking acpi_tb_delete_table() here and there, but actually this function should only be used to uninstall tables. This can work just because its invocations are equivalent to invalidation in some cases. This patch splits acpi_tb_delete_table() into acpi_tb_invalidate_table() and acpi_tb_uninstall_table() and cleans up the hidden logic using the new APIs. This is achieved by: 1. Rename acpi_tb_delete_table() to acpi_tb_uninstall_table() as it is mainly called before resetting struct acpi_table_desc.Address. Thus the table descriptor is in "not INSTALLED" state. This patch enforces this by setting struct acpi_table_desc.Address to NULL in this function. 2. Introduce acpi_tb_invalidate_table() to be the reversal of acpi_tb_validate_table() and invoke it in acpi_tb_uninstall_table(). 3. Introduce acpi_tb_release_table() to release the table pointer that is not maintained in acpi_gbl_root_table_list and rewrite acpi_tb_invalidate_table() using this new function to reduce redundancies. After cleaning up, the maintainability of the internal APIs are also improved: 1. acpi_tb_acquire_table: Acquire struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 2. acpi_tb_release_table: Release struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 3. acpi_tb_install_table: Make struct acpi_table_desc.Address not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 4. acpi_tb_uninstall_table: Make struct acpi_table_desc.Address NULL according to ACPI_TABLE_ORIGIN_xxx flags. 5. acpi_tb_validate_table: Make struct acpi_table_desc.Pointer not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 6. acpi_tb_invalidate_table: Make struct acpi_table_desc.Pointer NULL according to ACPI_TABLE_ORIGIN_xxx flags. 7. acpi_tb_override_table: Replace struct acpi_table_desc.Address and struct acpi_table_desc.Flags. It only happens in "INSTALLED" state. The patch has been unit tested in acpi_exec by: 1. Initializing; 2. Executing exc_tbl ASLTS tests; 3. Executing "Load" command. So that all original acpi_tb_install_table() and acpi_tb_override_table() invocations are covered. Known Issues: 1. Cleanup acpi_tb_add_table() to Kill Code Redundancies Current implementation in acpi_tb_add_table() is not very clean, further patch can rewrite acpi_tb_add_table() with ordered acpi_tb_install_table(), acpi_tb_override_table() and acpi_tb_validate_table(). It is not done in this patch so that it is easy for the reviewers to understand the changes in this patch. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:42 +08:00
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
acpi_tb_print_table_header(new_table_desc->address,
new_table_desc->pointer);
/* Set the global integer width (based upon revision of the DSDT) */
if (table_index == ACPI_TABLE_INDEX_DSDT) {
acpi_ut_set_integer_width(new_table_desc->pointer->revision);
}
}
/*******************************************************************************
*
* FUNCTION: acpi_tb_install_fixed_table
*
* PARAMETERS: address - Physical address of DSDT or FACS
* signature - Table signature, NULL if no need to
* match
* table_index - Index into root table array
*
* RETURN: Status
*
* DESCRIPTION: Install a fixed ACPI table (DSDT/FACS) into the global data
* structure.
*
******************************************************************************/
acpi_status
acpi_tb_install_fixed_table(acpi_physical_address address,
char *signature, u32 table_index)
{
struct acpi_table_desc new_table_desc;
acpi_status status;
ACPI_FUNCTION_TRACE(tb_install_fixed_table);
if (!address) {
ACPI_ERROR((AE_INFO,
"Null physical address for ACPI table [%s]",
signature));
return (AE_NO_MEMORY);
}
/* Fill a table descriptor for validation */
status = acpi_tb_acquire_temp_table(&new_table_desc, address,
ACPI_TABLE_ORIGIN_INTERNAL_PHYSICAL);
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
if (ACPI_FAILURE(status)) {
ACPI_ERROR((AE_INFO, "Could not acquire table length at %p",
ACPI_CAST_PTR(void, address)));
return_ACPI_STATUS(status);
}
/* Validate and verify a table before installation */
ACPICA: Tables: Add mechanism to control early table checksum verification. It is reported that Linux x86 kernel cannot map large tables. The following large SSDT table on such platform fails to pass checksum verification and cannot be installed: ACPI: SSDT 0x00000000B9638018 07A0C4 (v02 INTEL S2600CP 00004000 INTL 20100331) It sounds strange that in the 64-bit virtual memory address space, we cannot map a single ACPI table to do checksum verification. The root cause is: 1. ACPICA doesn't split IO memory mapping and table mapping; 2. Linux x86 OSL implements acpi_os_map_memory() using a size limited fix-map mechanism during early boot stage, which is more suitable for only IO mappings. ACPICA originally only mapped table header for signature validation, and this header mapping is required by OSL override mechanism. There was no checksum verification because we could not map the whole table using this OSL. While the following ACPICA commit enforces checksum verification by mapping the whole table during Linux boot stage and it finally triggers this issue on some platforms: Commit: 86dfc6f339886559d80ee0d4bd20fe5ee90450f0 Subject: ACPICA: Tables: Fix table checksums verification before installation. Before doing further cleanups for the OSL table mapping and override implementation, this patch introduces an option for such OSPMs to temporarily discard the checksum verification feature. It then can be re-enabled easily when the ACPICA and the underlying OSL is ready. This patch also deletes a comment around the limitation of mappings because it is not correct. The limitation is not how many times we can map in the early stage, but the OSL mapping facility may not be suitable for mapping the ACPI tables and thus may complain us the size limitation. The acpi_tb_verify_table() is renamed to acpi_tb_verify_temp_table() due to the work around added, it now only applies to the table descriptor that hasn't been installed and cannot be used in other cases. Lv Zheng. Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-31 08:14:44 +08:00
status = acpi_tb_verify_temp_table(&new_table_desc, signature);
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
if (ACPI_FAILURE(status)) {
goto release_and_exit;
}
acpi_tb_install_table_with_override(table_index, &new_table_desc, TRUE);
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
release_and_exit:
/* Release the temporary table descriptor */
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
acpi_tb_release_temp_table(&new_table_desc);
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_tb_install_standard_table
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
*
* PARAMETERS: address - Address of the table (might be a virtual
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
* address depending on the table_flags)
* flags - Flags for the table
* reload - Whether reload should be performed
* override - Whether override should be performed
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
* table_index - Where the table index is returned
*
* RETURN: Status
*
* DESCRIPTION: This function is called to install an ACPI table that is
* neither DSDT nor FACS (a "standard" table.)
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
* When this function is called by "Load" or "LoadTable" opcodes,
* or by acpi_load_table() API, the "Reload" parameter is set.
* After sucessfully returning from this function, table is
* "INSTALLED" but not "VALIDATED".
*
******************************************************************************/
acpi_status
acpi_tb_install_standard_table(acpi_physical_address address,
u8 flags,
u8 reload, u8 override, u32 *table_index)
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
{
u32 i;
acpi_status status = AE_OK;
struct acpi_table_desc new_table_desc;
ACPI_FUNCTION_TRACE(tb_install_standard_table);
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
/* Acquire a temporary table descriptor for validation */
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
status = acpi_tb_acquire_temp_table(&new_table_desc, address, flags);
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
if (ACPI_FAILURE(status)) {
ACPI_ERROR((AE_INFO, "Could not acquire table length at %p",
ACPI_CAST_PTR(void, address)));
return_ACPI_STATUS(status);
}
/*
* Optionally do not load any SSDTs from the RSDT/XSDT. This can
* be useful for debugging ACPI problems on some machines.
*/
if (!reload &&
acpi_gbl_disable_ssdt_table_install &&
ACPI_COMPARE_NAME(&new_table_desc.signature, ACPI_SIG_SSDT)) {
ACPI_INFO((AE_INFO, "Ignoring installation of %4.4s at %p",
new_table_desc.signature.ascii, ACPI_CAST_PTR(void,
address)));
goto release_and_exit;
}
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
/* Validate and verify a table before installation */
ACPICA: Tables: Add mechanism to control early table checksum verification. It is reported that Linux x86 kernel cannot map large tables. The following large SSDT table on such platform fails to pass checksum verification and cannot be installed: ACPI: SSDT 0x00000000B9638018 07A0C4 (v02 INTEL S2600CP 00004000 INTL 20100331) It sounds strange that in the 64-bit virtual memory address space, we cannot map a single ACPI table to do checksum verification. The root cause is: 1. ACPICA doesn't split IO memory mapping and table mapping; 2. Linux x86 OSL implements acpi_os_map_memory() using a size limited fix-map mechanism during early boot stage, which is more suitable for only IO mappings. ACPICA originally only mapped table header for signature validation, and this header mapping is required by OSL override mechanism. There was no checksum verification because we could not map the whole table using this OSL. While the following ACPICA commit enforces checksum verification by mapping the whole table during Linux boot stage and it finally triggers this issue on some platforms: Commit: 86dfc6f339886559d80ee0d4bd20fe5ee90450f0 Subject: ACPICA: Tables: Fix table checksums verification before installation. Before doing further cleanups for the OSL table mapping and override implementation, this patch introduces an option for such OSPMs to temporarily discard the checksum verification feature. It then can be re-enabled easily when the ACPICA and the underlying OSL is ready. This patch also deletes a comment around the limitation of mappings because it is not correct. The limitation is not how many times we can map in the early stage, but the OSL mapping facility may not be suitable for mapping the ACPI tables and thus may complain us the size limitation. The acpi_tb_verify_table() is renamed to acpi_tb_verify_temp_table() due to the work around added, it now only applies to the table descriptor that hasn't been installed and cannot be used in other cases. Lv Zheng. Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-31 08:14:44 +08:00
status = acpi_tb_verify_temp_table(&new_table_desc, NULL);
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
if (ACPI_FAILURE(status)) {
goto release_and_exit;
}
if (reload) {
/*
* Validate the incoming table signature.
*
* 1) Originally, we checked the table signature for "SSDT" or "PSDT".
* 2) We added support for OEMx tables, signature "OEM".
* 3) Valid tables were encountered with a null signature, so we just
* gave up on validating the signature, (05/2008).
* 4) We encountered non-AML tables such as the MADT, which caused
* interpreter errors and kernel faults. So now, we once again allow
* only "SSDT", "OEMx", and now, also a null signature. (05/2011).
*/
if ((new_table_desc.signature.ascii[0] != 0x00) &&
(!ACPI_COMPARE_NAME
(&new_table_desc.signature, ACPI_SIG_SSDT))
&& (ACPI_STRNCMP(new_table_desc.signature.ascii, "OEM", 3)))
{
ACPI_BIOS_ERROR((AE_INFO,
"Table has invalid signature [%4.4s] (0x%8.8X), "
"must be SSDT or OEMx",
acpi_ut_valid_acpi_name(new_table_desc.
signature.
ascii) ?
new_table_desc.signature.
ascii : "????",
new_table_desc.signature.integer));
status = AE_BAD_SIGNATURE;
goto release_and_exit;
}
/* Check if table is already registered */
for (i = 0; i < acpi_gbl_root_table_list.current_table_count;
++i) {
/*
* Check for a table match on the entire table length,
* not just the header.
*/
if (!acpi_tb_compare_tables(&new_table_desc, i)) {
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
continue;
}
/*
* Note: the current mechanism does not unregister a table if it is
* dynamically unloaded. The related namespace entries are deleted,
* but the table remains in the root table list.
*
* The assumption here is that the number of different tables that
* will be loaded is actually small, and there is minimal overhead
* in just keeping the table in case it is needed again.
*
* If this assumption changes in the future (perhaps on large
* machines with many table load/unload operations), tables will
* need to be unregistered when they are unloaded, and slots in the
* root table list should be reused when empty.
*/
if (acpi_gbl_root_table_list.tables[i].
flags & ACPI_TABLE_IS_LOADED) {
/* Table is still loaded, this is an error */
status = AE_ALREADY_EXISTS;
goto release_and_exit;
} else {
/*
* Table was unloaded, allow it to be reloaded.
* As we are going to return AE_OK to the caller, we should
* take the responsibility of freeing the input descriptor.
* Refill the input descriptor to ensure
* acpi_tb_install_table_with_override() can be called again to
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
* indicate the re-installation.
*/
acpi_tb_uninstall_table(&new_table_desc);
*table_index = i;
(void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
return_ACPI_STATUS(AE_OK);
}
}
ACPICA: Tables: Clean up split INSTALLED/VALIDATED table state logics. This patch is mainly a naming cleanup to clarify hidden logics, no functional changes. acpi_initialize_tables() is used by Linux to install table addresses for early boot steps. During this stage, table addresses are mapped by early_ioremap() mechanism which is different from the runtime IO mappings. Thus it is not safe for ACPICA to keep mapped pointers in struct acpi_table_desc structure during this stage. In order to support this in ACPICA, table states are divided into 1. "INSTALLED" (where struct acpi_table_desc.Pointer is always NULL) and 2. "VALIDATED" (where struct acpi_table_desc.Pointer is always not NULL). During acpi_initialize_tables(), table state are ensured to be "INSTALLED" but not "VALIDATED". This logic is ensured by the original code in very ambigious way. For example, currently acpi_tb_delete_table() is invoked in some place to perform an uninstallation while it is invoked in other place to perform an invalidation. They happen to work just because no one enters the penalty where the 2 behaviours are not equivalent. The naming cleanups are made in this patch: A. For installation and validation: There is code setting struct acpi_table_desc.Pointer first and delete it immediately to keep the descriptor's state as "INSTALLED" during the installation. This patch implements this in more direct way. After applying it, struct acpi_table_desc.Pointer will never be set in acpi_tb_install_table() and acpi_tb_override_table() as they are the only functions invoked during acpi_initialize_tables(). This is achieved by: 1. Rename acpi_tb_verify_table() to acpi_tb_validate_table() to clarify this change. 2. Rename acpi_tb_table_override() to acpi_tb_override_table() to keep nameing consistencies as other APIs (verb. Table). 3. Stops setting struct acpi_table_desc.Pointer in acpi_tb_install_table() and acpi_tb_table_override(). 4. Introduce acpi_tb_acquire_table() to acquire the table pointer that is not maintained in the struct acpi_table_desc of the global root table list and rewrite acpi_tb_validate_table() using this new function to reduce redundancies. 5. Replace the table pointer using the overridden table pointer in acpi_tb_add_table(). As acpi_tb_add_table() is not invoked during early boot stage, tables returned from this functions should be "VALIDATED". As acpi_tb_override_table() is modified by this patch to return a "INSTALLED" but not "VALIDATED" descriptor, to keep acpi_tb_add_table() unchanged, struct acpi_table_desc.Pointer is filled in acpi_tb_add_table(). B. For invalidation and uninstallation: The original code invalidate table by invoking acpi_tb_delete_table() here and there, but actually this function should only be used to uninstall tables. This can work just because its invocations are equivalent to invalidation in some cases. This patch splits acpi_tb_delete_table() into acpi_tb_invalidate_table() and acpi_tb_uninstall_table() and cleans up the hidden logic using the new APIs. This is achieved by: 1. Rename acpi_tb_delete_table() to acpi_tb_uninstall_table() as it is mainly called before resetting struct acpi_table_desc.Address. Thus the table descriptor is in "not INSTALLED" state. This patch enforces this by setting struct acpi_table_desc.Address to NULL in this function. 2. Introduce acpi_tb_invalidate_table() to be the reversal of acpi_tb_validate_table() and invoke it in acpi_tb_uninstall_table(). 3. Introduce acpi_tb_release_table() to release the table pointer that is not maintained in acpi_gbl_root_table_list and rewrite acpi_tb_invalidate_table() using this new function to reduce redundancies. After cleaning up, the maintainability of the internal APIs are also improved: 1. acpi_tb_acquire_table: Acquire struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 2. acpi_tb_release_table: Release struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 3. acpi_tb_install_table: Make struct acpi_table_desc.Address not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 4. acpi_tb_uninstall_table: Make struct acpi_table_desc.Address NULL according to ACPI_TABLE_ORIGIN_xxx flags. 5. acpi_tb_validate_table: Make struct acpi_table_desc.Pointer not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 6. acpi_tb_invalidate_table: Make struct acpi_table_desc.Pointer NULL according to ACPI_TABLE_ORIGIN_xxx flags. 7. acpi_tb_override_table: Replace struct acpi_table_desc.Address and struct acpi_table_desc.Flags. It only happens in "INSTALLED" state. The patch has been unit tested in acpi_exec by: 1. Initializing; 2. Executing exc_tbl ASLTS tests; 3. Executing "Load" command. So that all original acpi_tb_install_table() and acpi_tb_override_table() invocations are covered. Known Issues: 1. Cleanup acpi_tb_add_table() to Kill Code Redundancies Current implementation in acpi_tb_add_table() is not very clean, further patch can rewrite acpi_tb_add_table() with ordered acpi_tb_install_table(), acpi_tb_override_table() and acpi_tb_validate_table(). It is not done in this patch so that it is easy for the reviewers to understand the changes in this patch. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:42 +08:00
}
/* Add the table to the global root table list */
status = acpi_tb_get_next_root_index(&i);
if (ACPI_FAILURE(status)) {
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
goto release_and_exit;
}
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
*table_index = i;
acpi_tb_install_table_with_override(i, &new_table_desc, override);
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
release_and_exit:
/* Release the temporary table descriptor */
acpi_tb_release_temp_table(&new_table_desc);
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
ACPICA: Tables: Clean up split INSTALLED/VALIDATED table state logics. This patch is mainly a naming cleanup to clarify hidden logics, no functional changes. acpi_initialize_tables() is used by Linux to install table addresses for early boot steps. During this stage, table addresses are mapped by early_ioremap() mechanism which is different from the runtime IO mappings. Thus it is not safe for ACPICA to keep mapped pointers in struct acpi_table_desc structure during this stage. In order to support this in ACPICA, table states are divided into 1. "INSTALLED" (where struct acpi_table_desc.Pointer is always NULL) and 2. "VALIDATED" (where struct acpi_table_desc.Pointer is always not NULL). During acpi_initialize_tables(), table state are ensured to be "INSTALLED" but not "VALIDATED". This logic is ensured by the original code in very ambigious way. For example, currently acpi_tb_delete_table() is invoked in some place to perform an uninstallation while it is invoked in other place to perform an invalidation. They happen to work just because no one enters the penalty where the 2 behaviours are not equivalent. The naming cleanups are made in this patch: A. For installation and validation: There is code setting struct acpi_table_desc.Pointer first and delete it immediately to keep the descriptor's state as "INSTALLED" during the installation. This patch implements this in more direct way. After applying it, struct acpi_table_desc.Pointer will never be set in acpi_tb_install_table() and acpi_tb_override_table() as they are the only functions invoked during acpi_initialize_tables(). This is achieved by: 1. Rename acpi_tb_verify_table() to acpi_tb_validate_table() to clarify this change. 2. Rename acpi_tb_table_override() to acpi_tb_override_table() to keep nameing consistencies as other APIs (verb. Table). 3. Stops setting struct acpi_table_desc.Pointer in acpi_tb_install_table() and acpi_tb_table_override(). 4. Introduce acpi_tb_acquire_table() to acquire the table pointer that is not maintained in the struct acpi_table_desc of the global root table list and rewrite acpi_tb_validate_table() using this new function to reduce redundancies. 5. Replace the table pointer using the overridden table pointer in acpi_tb_add_table(). As acpi_tb_add_table() is not invoked during early boot stage, tables returned from this functions should be "VALIDATED". As acpi_tb_override_table() is modified by this patch to return a "INSTALLED" but not "VALIDATED" descriptor, to keep acpi_tb_add_table() unchanged, struct acpi_table_desc.Pointer is filled in acpi_tb_add_table(). B. For invalidation and uninstallation: The original code invalidate table by invoking acpi_tb_delete_table() here and there, but actually this function should only be used to uninstall tables. This can work just because its invocations are equivalent to invalidation in some cases. This patch splits acpi_tb_delete_table() into acpi_tb_invalidate_table() and acpi_tb_uninstall_table() and cleans up the hidden logic using the new APIs. This is achieved by: 1. Rename acpi_tb_delete_table() to acpi_tb_uninstall_table() as it is mainly called before resetting struct acpi_table_desc.Address. Thus the table descriptor is in "not INSTALLED" state. This patch enforces this by setting struct acpi_table_desc.Address to NULL in this function. 2. Introduce acpi_tb_invalidate_table() to be the reversal of acpi_tb_validate_table() and invoke it in acpi_tb_uninstall_table(). 3. Introduce acpi_tb_release_table() to release the table pointer that is not maintained in acpi_gbl_root_table_list and rewrite acpi_tb_invalidate_table() using this new function to reduce redundancies. After cleaning up, the maintainability of the internal APIs are also improved: 1. acpi_tb_acquire_table: Acquire struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 2. acpi_tb_release_table: Release struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 3. acpi_tb_install_table: Make struct acpi_table_desc.Address not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 4. acpi_tb_uninstall_table: Make struct acpi_table_desc.Address NULL according to ACPI_TABLE_ORIGIN_xxx flags. 5. acpi_tb_validate_table: Make struct acpi_table_desc.Pointer not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 6. acpi_tb_invalidate_table: Make struct acpi_table_desc.Pointer NULL according to ACPI_TABLE_ORIGIN_xxx flags. 7. acpi_tb_override_table: Replace struct acpi_table_desc.Address and struct acpi_table_desc.Flags. It only happens in "INSTALLED" state. The patch has been unit tested in acpi_exec by: 1. Initializing; 2. Executing exc_tbl ASLTS tests; 3. Executing "Load" command. So that all original acpi_tb_install_table() and acpi_tb_override_table() invocations are covered. Known Issues: 1. Cleanup acpi_tb_add_table() to Kill Code Redundancies Current implementation in acpi_tb_add_table() is not very clean, further patch can rewrite acpi_tb_add_table() with ordered acpi_tb_install_table(), acpi_tb_override_table() and acpi_tb_validate_table(). It is not done in this patch so that it is easy for the reviewers to understand the changes in this patch. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:42 +08:00
* FUNCTION: acpi_tb_override_table
*
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
* PARAMETERS: old_table_desc - Validated table descriptor to be
* overridden
*
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
* RETURN: None
*
* DESCRIPTION: Attempt table override by calling the OSL override functions.
* Note: If the table is overridden, then the entire new table
ACPICA: Tables: Clean up split INSTALLED/VALIDATED table state logics. This patch is mainly a naming cleanup to clarify hidden logics, no functional changes. acpi_initialize_tables() is used by Linux to install table addresses for early boot steps. During this stage, table addresses are mapped by early_ioremap() mechanism which is different from the runtime IO mappings. Thus it is not safe for ACPICA to keep mapped pointers in struct acpi_table_desc structure during this stage. In order to support this in ACPICA, table states are divided into 1. "INSTALLED" (where struct acpi_table_desc.Pointer is always NULL) and 2. "VALIDATED" (where struct acpi_table_desc.Pointer is always not NULL). During acpi_initialize_tables(), table state are ensured to be "INSTALLED" but not "VALIDATED". This logic is ensured by the original code in very ambigious way. For example, currently acpi_tb_delete_table() is invoked in some place to perform an uninstallation while it is invoked in other place to perform an invalidation. They happen to work just because no one enters the penalty where the 2 behaviours are not equivalent. The naming cleanups are made in this patch: A. For installation and validation: There is code setting struct acpi_table_desc.Pointer first and delete it immediately to keep the descriptor's state as "INSTALLED" during the installation. This patch implements this in more direct way. After applying it, struct acpi_table_desc.Pointer will never be set in acpi_tb_install_table() and acpi_tb_override_table() as they are the only functions invoked during acpi_initialize_tables(). This is achieved by: 1. Rename acpi_tb_verify_table() to acpi_tb_validate_table() to clarify this change. 2. Rename acpi_tb_table_override() to acpi_tb_override_table() to keep nameing consistencies as other APIs (verb. Table). 3. Stops setting struct acpi_table_desc.Pointer in acpi_tb_install_table() and acpi_tb_table_override(). 4. Introduce acpi_tb_acquire_table() to acquire the table pointer that is not maintained in the struct acpi_table_desc of the global root table list and rewrite acpi_tb_validate_table() using this new function to reduce redundancies. 5. Replace the table pointer using the overridden table pointer in acpi_tb_add_table(). As acpi_tb_add_table() is not invoked during early boot stage, tables returned from this functions should be "VALIDATED". As acpi_tb_override_table() is modified by this patch to return a "INSTALLED" but not "VALIDATED" descriptor, to keep acpi_tb_add_table() unchanged, struct acpi_table_desc.Pointer is filled in acpi_tb_add_table(). B. For invalidation and uninstallation: The original code invalidate table by invoking acpi_tb_delete_table() here and there, but actually this function should only be used to uninstall tables. This can work just because its invocations are equivalent to invalidation in some cases. This patch splits acpi_tb_delete_table() into acpi_tb_invalidate_table() and acpi_tb_uninstall_table() and cleans up the hidden logic using the new APIs. This is achieved by: 1. Rename acpi_tb_delete_table() to acpi_tb_uninstall_table() as it is mainly called before resetting struct acpi_table_desc.Address. Thus the table descriptor is in "not INSTALLED" state. This patch enforces this by setting struct acpi_table_desc.Address to NULL in this function. 2. Introduce acpi_tb_invalidate_table() to be the reversal of acpi_tb_validate_table() and invoke it in acpi_tb_uninstall_table(). 3. Introduce acpi_tb_release_table() to release the table pointer that is not maintained in acpi_gbl_root_table_list and rewrite acpi_tb_invalidate_table() using this new function to reduce redundancies. After cleaning up, the maintainability of the internal APIs are also improved: 1. acpi_tb_acquire_table: Acquire struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 2. acpi_tb_release_table: Release struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 3. acpi_tb_install_table: Make struct acpi_table_desc.Address not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 4. acpi_tb_uninstall_table: Make struct acpi_table_desc.Address NULL according to ACPI_TABLE_ORIGIN_xxx flags. 5. acpi_tb_validate_table: Make struct acpi_table_desc.Pointer not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 6. acpi_tb_invalidate_table: Make struct acpi_table_desc.Pointer NULL according to ACPI_TABLE_ORIGIN_xxx flags. 7. acpi_tb_override_table: Replace struct acpi_table_desc.Address and struct acpi_table_desc.Flags. It only happens in "INSTALLED" state. The patch has been unit tested in acpi_exec by: 1. Initializing; 2. Executing exc_tbl ASLTS tests; 3. Executing "Load" command. So that all original acpi_tb_install_table() and acpi_tb_override_table() invocations are covered. Known Issues: 1. Cleanup acpi_tb_add_table() to Kill Code Redundancies Current implementation in acpi_tb_add_table() is not very clean, further patch can rewrite acpi_tb_add_table() with ordered acpi_tb_install_table(), acpi_tb_override_table() and acpi_tb_validate_table(). It is not done in this patch so that it is easy for the reviewers to understand the changes in this patch. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:42 +08:00
* is acquired and returned by this function.
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
* Before/after invocation, the table descriptor is in a state
* that is "VALIDATED".
*
******************************************************************************/
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
void acpi_tb_override_table(struct acpi_table_desc *old_table_desc)
{
acpi_status status;
char *override_type;
ACPICA: Tables: Clean up split INSTALLED/VALIDATED table state logics. This patch is mainly a naming cleanup to clarify hidden logics, no functional changes. acpi_initialize_tables() is used by Linux to install table addresses for early boot steps. During this stage, table addresses are mapped by early_ioremap() mechanism which is different from the runtime IO mappings. Thus it is not safe for ACPICA to keep mapped pointers in struct acpi_table_desc structure during this stage. In order to support this in ACPICA, table states are divided into 1. "INSTALLED" (where struct acpi_table_desc.Pointer is always NULL) and 2. "VALIDATED" (where struct acpi_table_desc.Pointer is always not NULL). During acpi_initialize_tables(), table state are ensured to be "INSTALLED" but not "VALIDATED". This logic is ensured by the original code in very ambigious way. For example, currently acpi_tb_delete_table() is invoked in some place to perform an uninstallation while it is invoked in other place to perform an invalidation. They happen to work just because no one enters the penalty where the 2 behaviours are not equivalent. The naming cleanups are made in this patch: A. For installation and validation: There is code setting struct acpi_table_desc.Pointer first and delete it immediately to keep the descriptor's state as "INSTALLED" during the installation. This patch implements this in more direct way. After applying it, struct acpi_table_desc.Pointer will never be set in acpi_tb_install_table() and acpi_tb_override_table() as they are the only functions invoked during acpi_initialize_tables(). This is achieved by: 1. Rename acpi_tb_verify_table() to acpi_tb_validate_table() to clarify this change. 2. Rename acpi_tb_table_override() to acpi_tb_override_table() to keep nameing consistencies as other APIs (verb. Table). 3. Stops setting struct acpi_table_desc.Pointer in acpi_tb_install_table() and acpi_tb_table_override(). 4. Introduce acpi_tb_acquire_table() to acquire the table pointer that is not maintained in the struct acpi_table_desc of the global root table list and rewrite acpi_tb_validate_table() using this new function to reduce redundancies. 5. Replace the table pointer using the overridden table pointer in acpi_tb_add_table(). As acpi_tb_add_table() is not invoked during early boot stage, tables returned from this functions should be "VALIDATED". As acpi_tb_override_table() is modified by this patch to return a "INSTALLED" but not "VALIDATED" descriptor, to keep acpi_tb_add_table() unchanged, struct acpi_table_desc.Pointer is filled in acpi_tb_add_table(). B. For invalidation and uninstallation: The original code invalidate table by invoking acpi_tb_delete_table() here and there, but actually this function should only be used to uninstall tables. This can work just because its invocations are equivalent to invalidation in some cases. This patch splits acpi_tb_delete_table() into acpi_tb_invalidate_table() and acpi_tb_uninstall_table() and cleans up the hidden logic using the new APIs. This is achieved by: 1. Rename acpi_tb_delete_table() to acpi_tb_uninstall_table() as it is mainly called before resetting struct acpi_table_desc.Address. Thus the table descriptor is in "not INSTALLED" state. This patch enforces this by setting struct acpi_table_desc.Address to NULL in this function. 2. Introduce acpi_tb_invalidate_table() to be the reversal of acpi_tb_validate_table() and invoke it in acpi_tb_uninstall_table(). 3. Introduce acpi_tb_release_table() to release the table pointer that is not maintained in acpi_gbl_root_table_list and rewrite acpi_tb_invalidate_table() using this new function to reduce redundancies. After cleaning up, the maintainability of the internal APIs are also improved: 1. acpi_tb_acquire_table: Acquire struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 2. acpi_tb_release_table: Release struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 3. acpi_tb_install_table: Make struct acpi_table_desc.Address not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 4. acpi_tb_uninstall_table: Make struct acpi_table_desc.Address NULL according to ACPI_TABLE_ORIGIN_xxx flags. 5. acpi_tb_validate_table: Make struct acpi_table_desc.Pointer not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 6. acpi_tb_invalidate_table: Make struct acpi_table_desc.Pointer NULL according to ACPI_TABLE_ORIGIN_xxx flags. 7. acpi_tb_override_table: Replace struct acpi_table_desc.Address and struct acpi_table_desc.Flags. It only happens in "INSTALLED" state. The patch has been unit tested in acpi_exec by: 1. Initializing; 2. Executing exc_tbl ASLTS tests; 3. Executing "Load" command. So that all original acpi_tb_install_table() and acpi_tb_override_table() invocations are covered. Known Issues: 1. Cleanup acpi_tb_add_table() to Kill Code Redundancies Current implementation in acpi_tb_add_table() is not very clean, further patch can rewrite acpi_tb_add_table() with ordered acpi_tb_install_table(), acpi_tb_override_table() and acpi_tb_validate_table(). It is not done in this patch so that it is easy for the reviewers to understand the changes in this patch. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:42 +08:00
struct acpi_table_desc new_table_desc;
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
struct acpi_table_header *table;
acpi_physical_address address;
u32 length;
/* (1) Attempt logical override (returns a logical address) */
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
status = acpi_os_table_override(old_table_desc->pointer, &table);
if (ACPI_SUCCESS(status) && table) {
acpi_tb_acquire_temp_table(&new_table_desc,
ACPI_PTR_TO_PHYSADDR(table),
ACPI_TABLE_ORIGIN_EXTERNAL_VIRTUAL);
override_type = "Logical";
goto finish_override;
}
/* (2) Attempt physical override (returns a physical address) */
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
status = acpi_os_physical_table_override(old_table_desc->pointer,
&address, &length);
if (ACPI_SUCCESS(status) && address && length) {
acpi_tb_acquire_temp_table(&new_table_desc, address,
ACPI_TABLE_ORIGIN_INTERNAL_PHYSICAL);
override_type = "Physical";
goto finish_override;
}
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
return; /* There was no override */
finish_override:
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
/* Validate and verify a table before overriding */
ACPICA: Tables: Add mechanism to control early table checksum verification. It is reported that Linux x86 kernel cannot map large tables. The following large SSDT table on such platform fails to pass checksum verification and cannot be installed: ACPI: SSDT 0x00000000B9638018 07A0C4 (v02 INTEL S2600CP 00004000 INTL 20100331) It sounds strange that in the 64-bit virtual memory address space, we cannot map a single ACPI table to do checksum verification. The root cause is: 1. ACPICA doesn't split IO memory mapping and table mapping; 2. Linux x86 OSL implements acpi_os_map_memory() using a size limited fix-map mechanism during early boot stage, which is more suitable for only IO mappings. ACPICA originally only mapped table header for signature validation, and this header mapping is required by OSL override mechanism. There was no checksum verification because we could not map the whole table using this OSL. While the following ACPICA commit enforces checksum verification by mapping the whole table during Linux boot stage and it finally triggers this issue on some platforms: Commit: 86dfc6f339886559d80ee0d4bd20fe5ee90450f0 Subject: ACPICA: Tables: Fix table checksums verification before installation. Before doing further cleanups for the OSL table mapping and override implementation, this patch introduces an option for such OSPMs to temporarily discard the checksum verification feature. It then can be re-enabled easily when the ACPICA and the underlying OSL is ready. This patch also deletes a comment around the limitation of mappings because it is not correct. The limitation is not how many times we can map in the early stage, but the OSL mapping facility may not be suitable for mapping the ACPI tables and thus may complain us the size limitation. The acpi_tb_verify_table() is renamed to acpi_tb_verify_temp_table() due to the work around added, it now only applies to the table descriptor that hasn't been installed and cannot be used in other cases. Lv Zheng. Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-31 08:14:44 +08:00
status = acpi_tb_verify_temp_table(&new_table_desc, NULL);
ACPICA: Tables: Clean up split INSTALLED/VALIDATED table state logics. This patch is mainly a naming cleanup to clarify hidden logics, no functional changes. acpi_initialize_tables() is used by Linux to install table addresses for early boot steps. During this stage, table addresses are mapped by early_ioremap() mechanism which is different from the runtime IO mappings. Thus it is not safe for ACPICA to keep mapped pointers in struct acpi_table_desc structure during this stage. In order to support this in ACPICA, table states are divided into 1. "INSTALLED" (where struct acpi_table_desc.Pointer is always NULL) and 2. "VALIDATED" (where struct acpi_table_desc.Pointer is always not NULL). During acpi_initialize_tables(), table state are ensured to be "INSTALLED" but not "VALIDATED". This logic is ensured by the original code in very ambigious way. For example, currently acpi_tb_delete_table() is invoked in some place to perform an uninstallation while it is invoked in other place to perform an invalidation. They happen to work just because no one enters the penalty where the 2 behaviours are not equivalent. The naming cleanups are made in this patch: A. For installation and validation: There is code setting struct acpi_table_desc.Pointer first and delete it immediately to keep the descriptor's state as "INSTALLED" during the installation. This patch implements this in more direct way. After applying it, struct acpi_table_desc.Pointer will never be set in acpi_tb_install_table() and acpi_tb_override_table() as they are the only functions invoked during acpi_initialize_tables(). This is achieved by: 1. Rename acpi_tb_verify_table() to acpi_tb_validate_table() to clarify this change. 2. Rename acpi_tb_table_override() to acpi_tb_override_table() to keep nameing consistencies as other APIs (verb. Table). 3. Stops setting struct acpi_table_desc.Pointer in acpi_tb_install_table() and acpi_tb_table_override(). 4. Introduce acpi_tb_acquire_table() to acquire the table pointer that is not maintained in the struct acpi_table_desc of the global root table list and rewrite acpi_tb_validate_table() using this new function to reduce redundancies. 5. Replace the table pointer using the overridden table pointer in acpi_tb_add_table(). As acpi_tb_add_table() is not invoked during early boot stage, tables returned from this functions should be "VALIDATED". As acpi_tb_override_table() is modified by this patch to return a "INSTALLED" but not "VALIDATED" descriptor, to keep acpi_tb_add_table() unchanged, struct acpi_table_desc.Pointer is filled in acpi_tb_add_table(). B. For invalidation and uninstallation: The original code invalidate table by invoking acpi_tb_delete_table() here and there, but actually this function should only be used to uninstall tables. This can work just because its invocations are equivalent to invalidation in some cases. This patch splits acpi_tb_delete_table() into acpi_tb_invalidate_table() and acpi_tb_uninstall_table() and cleans up the hidden logic using the new APIs. This is achieved by: 1. Rename acpi_tb_delete_table() to acpi_tb_uninstall_table() as it is mainly called before resetting struct acpi_table_desc.Address. Thus the table descriptor is in "not INSTALLED" state. This patch enforces this by setting struct acpi_table_desc.Address to NULL in this function. 2. Introduce acpi_tb_invalidate_table() to be the reversal of acpi_tb_validate_table() and invoke it in acpi_tb_uninstall_table(). 3. Introduce acpi_tb_release_table() to release the table pointer that is not maintained in acpi_gbl_root_table_list and rewrite acpi_tb_invalidate_table() using this new function to reduce redundancies. After cleaning up, the maintainability of the internal APIs are also improved: 1. acpi_tb_acquire_table: Acquire struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 2. acpi_tb_release_table: Release struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 3. acpi_tb_install_table: Make struct acpi_table_desc.Address not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 4. acpi_tb_uninstall_table: Make struct acpi_table_desc.Address NULL according to ACPI_TABLE_ORIGIN_xxx flags. 5. acpi_tb_validate_table: Make struct acpi_table_desc.Pointer not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 6. acpi_tb_invalidate_table: Make struct acpi_table_desc.Pointer NULL according to ACPI_TABLE_ORIGIN_xxx flags. 7. acpi_tb_override_table: Replace struct acpi_table_desc.Address and struct acpi_table_desc.Flags. It only happens in "INSTALLED" state. The patch has been unit tested in acpi_exec by: 1. Initializing; 2. Executing exc_tbl ASLTS tests; 3. Executing "Load" command. So that all original acpi_tb_install_table() and acpi_tb_override_table() invocations are covered. Known Issues: 1. Cleanup acpi_tb_add_table() to Kill Code Redundancies Current implementation in acpi_tb_add_table() is not very clean, further patch can rewrite acpi_tb_add_table() with ordered acpi_tb_install_table(), acpi_tb_override_table() and acpi_tb_validate_table(). It is not done in this patch so that it is easy for the reviewers to understand the changes in this patch. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:42 +08:00
if (ACPI_FAILURE(status)) {
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
return;
ACPICA: Tables: Clean up split INSTALLED/VALIDATED table state logics. This patch is mainly a naming cleanup to clarify hidden logics, no functional changes. acpi_initialize_tables() is used by Linux to install table addresses for early boot steps. During this stage, table addresses are mapped by early_ioremap() mechanism which is different from the runtime IO mappings. Thus it is not safe for ACPICA to keep mapped pointers in struct acpi_table_desc structure during this stage. In order to support this in ACPICA, table states are divided into 1. "INSTALLED" (where struct acpi_table_desc.Pointer is always NULL) and 2. "VALIDATED" (where struct acpi_table_desc.Pointer is always not NULL). During acpi_initialize_tables(), table state are ensured to be "INSTALLED" but not "VALIDATED". This logic is ensured by the original code in very ambigious way. For example, currently acpi_tb_delete_table() is invoked in some place to perform an uninstallation while it is invoked in other place to perform an invalidation. They happen to work just because no one enters the penalty where the 2 behaviours are not equivalent. The naming cleanups are made in this patch: A. For installation and validation: There is code setting struct acpi_table_desc.Pointer first and delete it immediately to keep the descriptor's state as "INSTALLED" during the installation. This patch implements this in more direct way. After applying it, struct acpi_table_desc.Pointer will never be set in acpi_tb_install_table() and acpi_tb_override_table() as they are the only functions invoked during acpi_initialize_tables(). This is achieved by: 1. Rename acpi_tb_verify_table() to acpi_tb_validate_table() to clarify this change. 2. Rename acpi_tb_table_override() to acpi_tb_override_table() to keep nameing consistencies as other APIs (verb. Table). 3. Stops setting struct acpi_table_desc.Pointer in acpi_tb_install_table() and acpi_tb_table_override(). 4. Introduce acpi_tb_acquire_table() to acquire the table pointer that is not maintained in the struct acpi_table_desc of the global root table list and rewrite acpi_tb_validate_table() using this new function to reduce redundancies. 5. Replace the table pointer using the overridden table pointer in acpi_tb_add_table(). As acpi_tb_add_table() is not invoked during early boot stage, tables returned from this functions should be "VALIDATED". As acpi_tb_override_table() is modified by this patch to return a "INSTALLED" but not "VALIDATED" descriptor, to keep acpi_tb_add_table() unchanged, struct acpi_table_desc.Pointer is filled in acpi_tb_add_table(). B. For invalidation and uninstallation: The original code invalidate table by invoking acpi_tb_delete_table() here and there, but actually this function should only be used to uninstall tables. This can work just because its invocations are equivalent to invalidation in some cases. This patch splits acpi_tb_delete_table() into acpi_tb_invalidate_table() and acpi_tb_uninstall_table() and cleans up the hidden logic using the new APIs. This is achieved by: 1. Rename acpi_tb_delete_table() to acpi_tb_uninstall_table() as it is mainly called before resetting struct acpi_table_desc.Address. Thus the table descriptor is in "not INSTALLED" state. This patch enforces this by setting struct acpi_table_desc.Address to NULL in this function. 2. Introduce acpi_tb_invalidate_table() to be the reversal of acpi_tb_validate_table() and invoke it in acpi_tb_uninstall_table(). 3. Introduce acpi_tb_release_table() to release the table pointer that is not maintained in acpi_gbl_root_table_list and rewrite acpi_tb_invalidate_table() using this new function to reduce redundancies. After cleaning up, the maintainability of the internal APIs are also improved: 1. acpi_tb_acquire_table: Acquire struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 2. acpi_tb_release_table: Release struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 3. acpi_tb_install_table: Make struct acpi_table_desc.Address not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 4. acpi_tb_uninstall_table: Make struct acpi_table_desc.Address NULL according to ACPI_TABLE_ORIGIN_xxx flags. 5. acpi_tb_validate_table: Make struct acpi_table_desc.Pointer not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 6. acpi_tb_invalidate_table: Make struct acpi_table_desc.Pointer NULL according to ACPI_TABLE_ORIGIN_xxx flags. 7. acpi_tb_override_table: Replace struct acpi_table_desc.Address and struct acpi_table_desc.Flags. It only happens in "INSTALLED" state. The patch has been unit tested in acpi_exec by: 1. Initializing; 2. Executing exc_tbl ASLTS tests; 3. Executing "Load" command. So that all original acpi_tb_install_table() and acpi_tb_override_table() invocations are covered. Known Issues: 1. Cleanup acpi_tb_add_table() to Kill Code Redundancies Current implementation in acpi_tb_add_table() is not very clean, further patch can rewrite acpi_tb_add_table() with ordered acpi_tb_install_table(), acpi_tb_override_table() and acpi_tb_validate_table(). It is not done in this patch so that it is easy for the reviewers to understand the changes in this patch. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:42 +08:00
}
ACPI_INFO((AE_INFO, "%4.4s " ACPI_PRINTF_UINT
" %s table override, new table: " ACPI_PRINTF_UINT,
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
old_table_desc->signature.ascii,
ACPI_FORMAT_TO_UINT(old_table_desc->address),
ACPICA: Tables: Clean up split INSTALLED/VALIDATED table state logics. This patch is mainly a naming cleanup to clarify hidden logics, no functional changes. acpi_initialize_tables() is used by Linux to install table addresses for early boot steps. During this stage, table addresses are mapped by early_ioremap() mechanism which is different from the runtime IO mappings. Thus it is not safe for ACPICA to keep mapped pointers in struct acpi_table_desc structure during this stage. In order to support this in ACPICA, table states are divided into 1. "INSTALLED" (where struct acpi_table_desc.Pointer is always NULL) and 2. "VALIDATED" (where struct acpi_table_desc.Pointer is always not NULL). During acpi_initialize_tables(), table state are ensured to be "INSTALLED" but not "VALIDATED". This logic is ensured by the original code in very ambigious way. For example, currently acpi_tb_delete_table() is invoked in some place to perform an uninstallation while it is invoked in other place to perform an invalidation. They happen to work just because no one enters the penalty where the 2 behaviours are not equivalent. The naming cleanups are made in this patch: A. For installation and validation: There is code setting struct acpi_table_desc.Pointer first and delete it immediately to keep the descriptor's state as "INSTALLED" during the installation. This patch implements this in more direct way. After applying it, struct acpi_table_desc.Pointer will never be set in acpi_tb_install_table() and acpi_tb_override_table() as they are the only functions invoked during acpi_initialize_tables(). This is achieved by: 1. Rename acpi_tb_verify_table() to acpi_tb_validate_table() to clarify this change. 2. Rename acpi_tb_table_override() to acpi_tb_override_table() to keep nameing consistencies as other APIs (verb. Table). 3. Stops setting struct acpi_table_desc.Pointer in acpi_tb_install_table() and acpi_tb_table_override(). 4. Introduce acpi_tb_acquire_table() to acquire the table pointer that is not maintained in the struct acpi_table_desc of the global root table list and rewrite acpi_tb_validate_table() using this new function to reduce redundancies. 5. Replace the table pointer using the overridden table pointer in acpi_tb_add_table(). As acpi_tb_add_table() is not invoked during early boot stage, tables returned from this functions should be "VALIDATED". As acpi_tb_override_table() is modified by this patch to return a "INSTALLED" but not "VALIDATED" descriptor, to keep acpi_tb_add_table() unchanged, struct acpi_table_desc.Pointer is filled in acpi_tb_add_table(). B. For invalidation and uninstallation: The original code invalidate table by invoking acpi_tb_delete_table() here and there, but actually this function should only be used to uninstall tables. This can work just because its invocations are equivalent to invalidation in some cases. This patch splits acpi_tb_delete_table() into acpi_tb_invalidate_table() and acpi_tb_uninstall_table() and cleans up the hidden logic using the new APIs. This is achieved by: 1. Rename acpi_tb_delete_table() to acpi_tb_uninstall_table() as it is mainly called before resetting struct acpi_table_desc.Address. Thus the table descriptor is in "not INSTALLED" state. This patch enforces this by setting struct acpi_table_desc.Address to NULL in this function. 2. Introduce acpi_tb_invalidate_table() to be the reversal of acpi_tb_validate_table() and invoke it in acpi_tb_uninstall_table(). 3. Introduce acpi_tb_release_table() to release the table pointer that is not maintained in acpi_gbl_root_table_list and rewrite acpi_tb_invalidate_table() using this new function to reduce redundancies. After cleaning up, the maintainability of the internal APIs are also improved: 1. acpi_tb_acquire_table: Acquire struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 2. acpi_tb_release_table: Release struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 3. acpi_tb_install_table: Make struct acpi_table_desc.Address not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 4. acpi_tb_uninstall_table: Make struct acpi_table_desc.Address NULL according to ACPI_TABLE_ORIGIN_xxx flags. 5. acpi_tb_validate_table: Make struct acpi_table_desc.Pointer not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 6. acpi_tb_invalidate_table: Make struct acpi_table_desc.Pointer NULL according to ACPI_TABLE_ORIGIN_xxx flags. 7. acpi_tb_override_table: Replace struct acpi_table_desc.Address and struct acpi_table_desc.Flags. It only happens in "INSTALLED" state. The patch has been unit tested in acpi_exec by: 1. Initializing; 2. Executing exc_tbl ASLTS tests; 3. Executing "Load" command. So that all original acpi_tb_install_table() and acpi_tb_override_table() invocations are covered. Known Issues: 1. Cleanup acpi_tb_add_table() to Kill Code Redundancies Current implementation in acpi_tb_add_table() is not very clean, further patch can rewrite acpi_tb_add_table() with ordered acpi_tb_install_table(), acpi_tb_override_table() and acpi_tb_validate_table(). It is not done in this patch so that it is easy for the reviewers to understand the changes in this patch. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:42 +08:00
override_type, ACPI_FORMAT_TO_UINT(new_table_desc.address)));
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
/* We can now uninstall the original table */
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
acpi_tb_uninstall_table(old_table_desc);
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
/*
* Replace the original table descriptor and keep its state as
* "VALIDATED".
*/
acpi_tb_init_table_descriptor(old_table_desc, new_table_desc.address,
new_table_desc.flags,
new_table_desc.pointer);
ACPICA: Tables: Add mechanism to control early table checksum verification. It is reported that Linux x86 kernel cannot map large tables. The following large SSDT table on such platform fails to pass checksum verification and cannot be installed: ACPI: SSDT 0x00000000B9638018 07A0C4 (v02 INTEL S2600CP 00004000 INTL 20100331) It sounds strange that in the 64-bit virtual memory address space, we cannot map a single ACPI table to do checksum verification. The root cause is: 1. ACPICA doesn't split IO memory mapping and table mapping; 2. Linux x86 OSL implements acpi_os_map_memory() using a size limited fix-map mechanism during early boot stage, which is more suitable for only IO mappings. ACPICA originally only mapped table header for signature validation, and this header mapping is required by OSL override mechanism. There was no checksum verification because we could not map the whole table using this OSL. While the following ACPICA commit enforces checksum verification by mapping the whole table during Linux boot stage and it finally triggers this issue on some platforms: Commit: 86dfc6f339886559d80ee0d4bd20fe5ee90450f0 Subject: ACPICA: Tables: Fix table checksums verification before installation. Before doing further cleanups for the OSL table mapping and override implementation, this patch introduces an option for such OSPMs to temporarily discard the checksum verification feature. It then can be re-enabled easily when the ACPICA and the underlying OSL is ready. This patch also deletes a comment around the limitation of mappings because it is not correct. The limitation is not how many times we can map in the early stage, but the OSL mapping facility may not be suitable for mapping the ACPI tables and thus may complain us the size limitation. The acpi_tb_verify_table() is renamed to acpi_tb_verify_temp_table() due to the work around added, it now only applies to the table descriptor that hasn't been installed and cannot be used in other cases. Lv Zheng. Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-31 08:14:44 +08:00
acpi_tb_validate_temp_table(old_table_desc);
/* Release the temporary table descriptor */
acpi_tb_release_temp_table(&new_table_desc);
}
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
/*******************************************************************************
*
* FUNCTION: acpi_tb_store_table
*
* PARAMETERS: address - Table address
* table - Table header
* length - Table length
* flags - Install flags
* table_index - Where the table index is returned
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
*
* RETURN: Status and table index.
*
* DESCRIPTION: Add an ACPI table to the global table list
*
******************************************************************************/
acpi_status
acpi_tb_store_table(acpi_physical_address address,
struct acpi_table_header * table,
u32 length, u8 flags, u32 *table_index)
{
acpi_status status;
struct acpi_table_desc *table_desc;
status = acpi_tb_get_next_root_index(table_index);
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
if (ACPI_FAILURE(status)) {
return (status);
}
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
/* Initialize added table */
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
table_desc = &acpi_gbl_root_table_list.tables[*table_index];
acpi_tb_init_table_descriptor(table_desc, address, flags, table);
ACPICA: Tables: Fix table checksums verification before installation. The original table handling code does not always verify checksums before installing a table, this is because code to achieve this must be implemented here and there in the redundant code blocks. There are two stages during table initialization: 1. "INSTALLED" after acpi_tb_install_table() and acpi_tb_override_table(), struct acpi_table_desc.Pointer is ensured to be NULL. This can be safely used during OSPM's early boot stage. 2. "VALIDATED" after acpi_tb_validate_table(), struct acpi_table_desc.Pointer is ensured to be not NULL. This must not be used during OSPM's early boot stage. This patch changes acpi_tb_add_table() into an early boot safe API to reduce code redundancies by changing the table state that is returned by this function from "VALIDATED" to "INSTALLED". Then the table verification code can be done in a single place. Originally, the acpi_tb_add_table() can only be used by dynamic table loadings that are executed after early boot stage, it cannot be used by static table loadings that are executed in early boot stage as: 1. The address of the table is a virtual address either maintained by OSPMs who call acpi_load_table() or by ACPICA whenever "Load" or "LoadTable" opcodes are executed, while during early boot stage, physical address of the table should be used for table loading. 2. The API will ensure the state of the loaded table to be "VALIDATED" while during early boot stage, tables maintained by root table list should be kept as "INSTALLED". To achieve this: 1. Rename acpi_tb_install_table() to acpi_tb_install_fixed_table() as it only applies to DSDT/FACS installation. Rename acpi_tb_add_table() to acpi_tb_install_non_fixed_table() as it will be applied to the installation of the rest kinds of tables. 2. Introduce acpi_tb_install_table(), acpi_tb_install_and_override_table to collect redudant code where their invocations actually have slight differences. 1. acpi_tb_install_table() is used to fill an struct acpi_table_desc where the table length is known to the caller. 2. acpi_tb_install_and_override_table() is used to perform necessary overriding before installation. 3. Change a parameter of acpi_tb_install_non_fixed_table() from struct acpi_table_desc to acpi_physical_address to allow it to be invoked by static table loadings. Also cleanup acpi_ex_load_op() and acpi_load_table() to accomodate to the parameter change. 4. Invoke acpi_tb_install_non_fixed_table() for all table loadings other than DSDT/FACS in acpi_tb_parse_root_table() to improve code maintainability (logics are collected in the single function). Also delete useless code from acpi_tb_parse_root_table(). 5. Remove all acpi_tb_validate_table() from acpi_tb_install_non_fixed_table() and acpi_tb_install_fixed_table() so that the table descriptor is kept in the state of "INSTALLED" but not "VALIDATED" after returning from these functions. 6. Introduce temporary struct acpi_table_desc (new_table_desc/old_table_desc) into the functions to indicate a table descriptor that is not maintained by acpi_gbl_root_table_list. Introduce acpi_tb_acquire_temporal_table() and acpi_tb_release_temporal_table() to handle the use cases of such temporal tables. They are only used for verified installation. 7. Introduce acpi_tb_verify_table() to validate table and verify table checksum, also remove table checksum verification from acpi_tb_validate_table(). Invoke acpi_tb_validate_table() in the functions that will convert a table into "LOADED" state or invoke it from acpi_get_table_XXX() APIs. Invoke acpi_tb_verify_table() on temporary struct acpi_table_desc(s) that are going to be "INSTALLED". 8. Change acpi_tb_override_table() logic so that a temporary struct acpi_table_desc will be overridden before installtion, this makes code simpler. After applying the patch, tables are always installed after being overridden and the table checksums are always verified before installation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> [rjw: Subject] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:57 +08:00
table_desc->pointer = table;
return (AE_OK);
}
/*******************************************************************************
*
ACPICA: Tables: Clean up split INSTALLED/VALIDATED table state logics. This patch is mainly a naming cleanup to clarify hidden logics, no functional changes. acpi_initialize_tables() is used by Linux to install table addresses for early boot steps. During this stage, table addresses are mapped by early_ioremap() mechanism which is different from the runtime IO mappings. Thus it is not safe for ACPICA to keep mapped pointers in struct acpi_table_desc structure during this stage. In order to support this in ACPICA, table states are divided into 1. "INSTALLED" (where struct acpi_table_desc.Pointer is always NULL) and 2. "VALIDATED" (where struct acpi_table_desc.Pointer is always not NULL). During acpi_initialize_tables(), table state are ensured to be "INSTALLED" but not "VALIDATED". This logic is ensured by the original code in very ambigious way. For example, currently acpi_tb_delete_table() is invoked in some place to perform an uninstallation while it is invoked in other place to perform an invalidation. They happen to work just because no one enters the penalty where the 2 behaviours are not equivalent. The naming cleanups are made in this patch: A. For installation and validation: There is code setting struct acpi_table_desc.Pointer first and delete it immediately to keep the descriptor's state as "INSTALLED" during the installation. This patch implements this in more direct way. After applying it, struct acpi_table_desc.Pointer will never be set in acpi_tb_install_table() and acpi_tb_override_table() as they are the only functions invoked during acpi_initialize_tables(). This is achieved by: 1. Rename acpi_tb_verify_table() to acpi_tb_validate_table() to clarify this change. 2. Rename acpi_tb_table_override() to acpi_tb_override_table() to keep nameing consistencies as other APIs (verb. Table). 3. Stops setting struct acpi_table_desc.Pointer in acpi_tb_install_table() and acpi_tb_table_override(). 4. Introduce acpi_tb_acquire_table() to acquire the table pointer that is not maintained in the struct acpi_table_desc of the global root table list and rewrite acpi_tb_validate_table() using this new function to reduce redundancies. 5. Replace the table pointer using the overridden table pointer in acpi_tb_add_table(). As acpi_tb_add_table() is not invoked during early boot stage, tables returned from this functions should be "VALIDATED". As acpi_tb_override_table() is modified by this patch to return a "INSTALLED" but not "VALIDATED" descriptor, to keep acpi_tb_add_table() unchanged, struct acpi_table_desc.Pointer is filled in acpi_tb_add_table(). B. For invalidation and uninstallation: The original code invalidate table by invoking acpi_tb_delete_table() here and there, but actually this function should only be used to uninstall tables. This can work just because its invocations are equivalent to invalidation in some cases. This patch splits acpi_tb_delete_table() into acpi_tb_invalidate_table() and acpi_tb_uninstall_table() and cleans up the hidden logic using the new APIs. This is achieved by: 1. Rename acpi_tb_delete_table() to acpi_tb_uninstall_table() as it is mainly called before resetting struct acpi_table_desc.Address. Thus the table descriptor is in "not INSTALLED" state. This patch enforces this by setting struct acpi_table_desc.Address to NULL in this function. 2. Introduce acpi_tb_invalidate_table() to be the reversal of acpi_tb_validate_table() and invoke it in acpi_tb_uninstall_table(). 3. Introduce acpi_tb_release_table() to release the table pointer that is not maintained in acpi_gbl_root_table_list and rewrite acpi_tb_invalidate_table() using this new function to reduce redundancies. After cleaning up, the maintainability of the internal APIs are also improved: 1. acpi_tb_acquire_table: Acquire struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 2. acpi_tb_release_table: Release struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 3. acpi_tb_install_table: Make struct acpi_table_desc.Address not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 4. acpi_tb_uninstall_table: Make struct acpi_table_desc.Address NULL according to ACPI_TABLE_ORIGIN_xxx flags. 5. acpi_tb_validate_table: Make struct acpi_table_desc.Pointer not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 6. acpi_tb_invalidate_table: Make struct acpi_table_desc.Pointer NULL according to ACPI_TABLE_ORIGIN_xxx flags. 7. acpi_tb_override_table: Replace struct acpi_table_desc.Address and struct acpi_table_desc.Flags. It only happens in "INSTALLED" state. The patch has been unit tested in acpi_exec by: 1. Initializing; 2. Executing exc_tbl ASLTS tests; 3. Executing "Load" command. So that all original acpi_tb_install_table() and acpi_tb_override_table() invocations are covered. Known Issues: 1. Cleanup acpi_tb_add_table() to Kill Code Redundancies Current implementation in acpi_tb_add_table() is not very clean, further patch can rewrite acpi_tb_add_table() with ordered acpi_tb_install_table(), acpi_tb_override_table() and acpi_tb_validate_table(). It is not done in this patch so that it is easy for the reviewers to understand the changes in this patch. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:42 +08:00
* FUNCTION: acpi_tb_uninstall_table
*
ACPICA: Tables: Clean up split INSTALLED/VALIDATED table state logics. This patch is mainly a naming cleanup to clarify hidden logics, no functional changes. acpi_initialize_tables() is used by Linux to install table addresses for early boot steps. During this stage, table addresses are mapped by early_ioremap() mechanism which is different from the runtime IO mappings. Thus it is not safe for ACPICA to keep mapped pointers in struct acpi_table_desc structure during this stage. In order to support this in ACPICA, table states are divided into 1. "INSTALLED" (where struct acpi_table_desc.Pointer is always NULL) and 2. "VALIDATED" (where struct acpi_table_desc.Pointer is always not NULL). During acpi_initialize_tables(), table state are ensured to be "INSTALLED" but not "VALIDATED". This logic is ensured by the original code in very ambigious way. For example, currently acpi_tb_delete_table() is invoked in some place to perform an uninstallation while it is invoked in other place to perform an invalidation. They happen to work just because no one enters the penalty where the 2 behaviours are not equivalent. The naming cleanups are made in this patch: A. For installation and validation: There is code setting struct acpi_table_desc.Pointer first and delete it immediately to keep the descriptor's state as "INSTALLED" during the installation. This patch implements this in more direct way. After applying it, struct acpi_table_desc.Pointer will never be set in acpi_tb_install_table() and acpi_tb_override_table() as they are the only functions invoked during acpi_initialize_tables(). This is achieved by: 1. Rename acpi_tb_verify_table() to acpi_tb_validate_table() to clarify this change. 2. Rename acpi_tb_table_override() to acpi_tb_override_table() to keep nameing consistencies as other APIs (verb. Table). 3. Stops setting struct acpi_table_desc.Pointer in acpi_tb_install_table() and acpi_tb_table_override(). 4. Introduce acpi_tb_acquire_table() to acquire the table pointer that is not maintained in the struct acpi_table_desc of the global root table list and rewrite acpi_tb_validate_table() using this new function to reduce redundancies. 5. Replace the table pointer using the overridden table pointer in acpi_tb_add_table(). As acpi_tb_add_table() is not invoked during early boot stage, tables returned from this functions should be "VALIDATED". As acpi_tb_override_table() is modified by this patch to return a "INSTALLED" but not "VALIDATED" descriptor, to keep acpi_tb_add_table() unchanged, struct acpi_table_desc.Pointer is filled in acpi_tb_add_table(). B. For invalidation and uninstallation: The original code invalidate table by invoking acpi_tb_delete_table() here and there, but actually this function should only be used to uninstall tables. This can work just because its invocations are equivalent to invalidation in some cases. This patch splits acpi_tb_delete_table() into acpi_tb_invalidate_table() and acpi_tb_uninstall_table() and cleans up the hidden logic using the new APIs. This is achieved by: 1. Rename acpi_tb_delete_table() to acpi_tb_uninstall_table() as it is mainly called before resetting struct acpi_table_desc.Address. Thus the table descriptor is in "not INSTALLED" state. This patch enforces this by setting struct acpi_table_desc.Address to NULL in this function. 2. Introduce acpi_tb_invalidate_table() to be the reversal of acpi_tb_validate_table() and invoke it in acpi_tb_uninstall_table(). 3. Introduce acpi_tb_release_table() to release the table pointer that is not maintained in acpi_gbl_root_table_list and rewrite acpi_tb_invalidate_table() using this new function to reduce redundancies. After cleaning up, the maintainability of the internal APIs are also improved: 1. acpi_tb_acquire_table: Acquire struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 2. acpi_tb_release_table: Release struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 3. acpi_tb_install_table: Make struct acpi_table_desc.Address not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 4. acpi_tb_uninstall_table: Make struct acpi_table_desc.Address NULL according to ACPI_TABLE_ORIGIN_xxx flags. 5. acpi_tb_validate_table: Make struct acpi_table_desc.Pointer not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 6. acpi_tb_invalidate_table: Make struct acpi_table_desc.Pointer NULL according to ACPI_TABLE_ORIGIN_xxx flags. 7. acpi_tb_override_table: Replace struct acpi_table_desc.Address and struct acpi_table_desc.Flags. It only happens in "INSTALLED" state. The patch has been unit tested in acpi_exec by: 1. Initializing; 2. Executing exc_tbl ASLTS tests; 3. Executing "Load" command. So that all original acpi_tb_install_table() and acpi_tb_override_table() invocations are covered. Known Issues: 1. Cleanup acpi_tb_add_table() to Kill Code Redundancies Current implementation in acpi_tb_add_table() is not very clean, further patch can rewrite acpi_tb_add_table() with ordered acpi_tb_install_table(), acpi_tb_override_table() and acpi_tb_validate_table(). It is not done in this patch so that it is easy for the reviewers to understand the changes in this patch. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:42 +08:00
* PARAMETERS: table_desc - Table descriptor
*
* RETURN: None
*
* DESCRIPTION: Delete one internal ACPI table
*
******************************************************************************/
ACPICA: Tables: Clean up split INSTALLED/VALIDATED table state logics. This patch is mainly a naming cleanup to clarify hidden logics, no functional changes. acpi_initialize_tables() is used by Linux to install table addresses for early boot steps. During this stage, table addresses are mapped by early_ioremap() mechanism which is different from the runtime IO mappings. Thus it is not safe for ACPICA to keep mapped pointers in struct acpi_table_desc structure during this stage. In order to support this in ACPICA, table states are divided into 1. "INSTALLED" (where struct acpi_table_desc.Pointer is always NULL) and 2. "VALIDATED" (where struct acpi_table_desc.Pointer is always not NULL). During acpi_initialize_tables(), table state are ensured to be "INSTALLED" but not "VALIDATED". This logic is ensured by the original code in very ambigious way. For example, currently acpi_tb_delete_table() is invoked in some place to perform an uninstallation while it is invoked in other place to perform an invalidation. They happen to work just because no one enters the penalty where the 2 behaviours are not equivalent. The naming cleanups are made in this patch: A. For installation and validation: There is code setting struct acpi_table_desc.Pointer first and delete it immediately to keep the descriptor's state as "INSTALLED" during the installation. This patch implements this in more direct way. After applying it, struct acpi_table_desc.Pointer will never be set in acpi_tb_install_table() and acpi_tb_override_table() as they are the only functions invoked during acpi_initialize_tables(). This is achieved by: 1. Rename acpi_tb_verify_table() to acpi_tb_validate_table() to clarify this change. 2. Rename acpi_tb_table_override() to acpi_tb_override_table() to keep nameing consistencies as other APIs (verb. Table). 3. Stops setting struct acpi_table_desc.Pointer in acpi_tb_install_table() and acpi_tb_table_override(). 4. Introduce acpi_tb_acquire_table() to acquire the table pointer that is not maintained in the struct acpi_table_desc of the global root table list and rewrite acpi_tb_validate_table() using this new function to reduce redundancies. 5. Replace the table pointer using the overridden table pointer in acpi_tb_add_table(). As acpi_tb_add_table() is not invoked during early boot stage, tables returned from this functions should be "VALIDATED". As acpi_tb_override_table() is modified by this patch to return a "INSTALLED" but not "VALIDATED" descriptor, to keep acpi_tb_add_table() unchanged, struct acpi_table_desc.Pointer is filled in acpi_tb_add_table(). B. For invalidation and uninstallation: The original code invalidate table by invoking acpi_tb_delete_table() here and there, but actually this function should only be used to uninstall tables. This can work just because its invocations are equivalent to invalidation in some cases. This patch splits acpi_tb_delete_table() into acpi_tb_invalidate_table() and acpi_tb_uninstall_table() and cleans up the hidden logic using the new APIs. This is achieved by: 1. Rename acpi_tb_delete_table() to acpi_tb_uninstall_table() as it is mainly called before resetting struct acpi_table_desc.Address. Thus the table descriptor is in "not INSTALLED" state. This patch enforces this by setting struct acpi_table_desc.Address to NULL in this function. 2. Introduce acpi_tb_invalidate_table() to be the reversal of acpi_tb_validate_table() and invoke it in acpi_tb_uninstall_table(). 3. Introduce acpi_tb_release_table() to release the table pointer that is not maintained in acpi_gbl_root_table_list and rewrite acpi_tb_invalidate_table() using this new function to reduce redundancies. After cleaning up, the maintainability of the internal APIs are also improved: 1. acpi_tb_acquire_table: Acquire struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 2. acpi_tb_release_table: Release struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 3. acpi_tb_install_table: Make struct acpi_table_desc.Address not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 4. acpi_tb_uninstall_table: Make struct acpi_table_desc.Address NULL according to ACPI_TABLE_ORIGIN_xxx flags. 5. acpi_tb_validate_table: Make struct acpi_table_desc.Pointer not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 6. acpi_tb_invalidate_table: Make struct acpi_table_desc.Pointer NULL according to ACPI_TABLE_ORIGIN_xxx flags. 7. acpi_tb_override_table: Replace struct acpi_table_desc.Address and struct acpi_table_desc.Flags. It only happens in "INSTALLED" state. The patch has been unit tested in acpi_exec by: 1. Initializing; 2. Executing exc_tbl ASLTS tests; 3. Executing "Load" command. So that all original acpi_tb_install_table() and acpi_tb_override_table() invocations are covered. Known Issues: 1. Cleanup acpi_tb_add_table() to Kill Code Redundancies Current implementation in acpi_tb_add_table() is not very clean, further patch can rewrite acpi_tb_add_table() with ordered acpi_tb_install_table(), acpi_tb_override_table() and acpi_tb_validate_table(). It is not done in this patch so that it is easy for the reviewers to understand the changes in this patch. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:42 +08:00
void acpi_tb_uninstall_table(struct acpi_table_desc *table_desc)
{
ACPICA: Tables: Clean up split INSTALLED/VALIDATED table state logics. This patch is mainly a naming cleanup to clarify hidden logics, no functional changes. acpi_initialize_tables() is used by Linux to install table addresses for early boot steps. During this stage, table addresses are mapped by early_ioremap() mechanism which is different from the runtime IO mappings. Thus it is not safe for ACPICA to keep mapped pointers in struct acpi_table_desc structure during this stage. In order to support this in ACPICA, table states are divided into 1. "INSTALLED" (where struct acpi_table_desc.Pointer is always NULL) and 2. "VALIDATED" (where struct acpi_table_desc.Pointer is always not NULL). During acpi_initialize_tables(), table state are ensured to be "INSTALLED" but not "VALIDATED". This logic is ensured by the original code in very ambigious way. For example, currently acpi_tb_delete_table() is invoked in some place to perform an uninstallation while it is invoked in other place to perform an invalidation. They happen to work just because no one enters the penalty where the 2 behaviours are not equivalent. The naming cleanups are made in this patch: A. For installation and validation: There is code setting struct acpi_table_desc.Pointer first and delete it immediately to keep the descriptor's state as "INSTALLED" during the installation. This patch implements this in more direct way. After applying it, struct acpi_table_desc.Pointer will never be set in acpi_tb_install_table() and acpi_tb_override_table() as they are the only functions invoked during acpi_initialize_tables(). This is achieved by: 1. Rename acpi_tb_verify_table() to acpi_tb_validate_table() to clarify this change. 2. Rename acpi_tb_table_override() to acpi_tb_override_table() to keep nameing consistencies as other APIs (verb. Table). 3. Stops setting struct acpi_table_desc.Pointer in acpi_tb_install_table() and acpi_tb_table_override(). 4. Introduce acpi_tb_acquire_table() to acquire the table pointer that is not maintained in the struct acpi_table_desc of the global root table list and rewrite acpi_tb_validate_table() using this new function to reduce redundancies. 5. Replace the table pointer using the overridden table pointer in acpi_tb_add_table(). As acpi_tb_add_table() is not invoked during early boot stage, tables returned from this functions should be "VALIDATED". As acpi_tb_override_table() is modified by this patch to return a "INSTALLED" but not "VALIDATED" descriptor, to keep acpi_tb_add_table() unchanged, struct acpi_table_desc.Pointer is filled in acpi_tb_add_table(). B. For invalidation and uninstallation: The original code invalidate table by invoking acpi_tb_delete_table() here and there, but actually this function should only be used to uninstall tables. This can work just because its invocations are equivalent to invalidation in some cases. This patch splits acpi_tb_delete_table() into acpi_tb_invalidate_table() and acpi_tb_uninstall_table() and cleans up the hidden logic using the new APIs. This is achieved by: 1. Rename acpi_tb_delete_table() to acpi_tb_uninstall_table() as it is mainly called before resetting struct acpi_table_desc.Address. Thus the table descriptor is in "not INSTALLED" state. This patch enforces this by setting struct acpi_table_desc.Address to NULL in this function. 2. Introduce acpi_tb_invalidate_table() to be the reversal of acpi_tb_validate_table() and invoke it in acpi_tb_uninstall_table(). 3. Introduce acpi_tb_release_table() to release the table pointer that is not maintained in acpi_gbl_root_table_list and rewrite acpi_tb_invalidate_table() using this new function to reduce redundancies. After cleaning up, the maintainability of the internal APIs are also improved: 1. acpi_tb_acquire_table: Acquire struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 2. acpi_tb_release_table: Release struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 3. acpi_tb_install_table: Make struct acpi_table_desc.Address not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 4. acpi_tb_uninstall_table: Make struct acpi_table_desc.Address NULL according to ACPI_TABLE_ORIGIN_xxx flags. 5. acpi_tb_validate_table: Make struct acpi_table_desc.Pointer not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 6. acpi_tb_invalidate_table: Make struct acpi_table_desc.Pointer NULL according to ACPI_TABLE_ORIGIN_xxx flags. 7. acpi_tb_override_table: Replace struct acpi_table_desc.Address and struct acpi_table_desc.Flags. It only happens in "INSTALLED" state. The patch has been unit tested in acpi_exec by: 1. Initializing; 2. Executing exc_tbl ASLTS tests; 3. Executing "Load" command. So that all original acpi_tb_install_table() and acpi_tb_override_table() invocations are covered. Known Issues: 1. Cleanup acpi_tb_add_table() to Kill Code Redundancies Current implementation in acpi_tb_add_table() is not very clean, further patch can rewrite acpi_tb_add_table() with ordered acpi_tb_install_table(), acpi_tb_override_table() and acpi_tb_validate_table(). It is not done in this patch so that it is easy for the reviewers to understand the changes in this patch. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:42 +08:00
ACPI_FUNCTION_TRACE(tb_uninstall_table);
ACPICA: Tables: Clean up split INSTALLED/VALIDATED table state logics. This patch is mainly a naming cleanup to clarify hidden logics, no functional changes. acpi_initialize_tables() is used by Linux to install table addresses for early boot steps. During this stage, table addresses are mapped by early_ioremap() mechanism which is different from the runtime IO mappings. Thus it is not safe for ACPICA to keep mapped pointers in struct acpi_table_desc structure during this stage. In order to support this in ACPICA, table states are divided into 1. "INSTALLED" (where struct acpi_table_desc.Pointer is always NULL) and 2. "VALIDATED" (where struct acpi_table_desc.Pointer is always not NULL). During acpi_initialize_tables(), table state are ensured to be "INSTALLED" but not "VALIDATED". This logic is ensured by the original code in very ambigious way. For example, currently acpi_tb_delete_table() is invoked in some place to perform an uninstallation while it is invoked in other place to perform an invalidation. They happen to work just because no one enters the penalty where the 2 behaviours are not equivalent. The naming cleanups are made in this patch: A. For installation and validation: There is code setting struct acpi_table_desc.Pointer first and delete it immediately to keep the descriptor's state as "INSTALLED" during the installation. This patch implements this in more direct way. After applying it, struct acpi_table_desc.Pointer will never be set in acpi_tb_install_table() and acpi_tb_override_table() as they are the only functions invoked during acpi_initialize_tables(). This is achieved by: 1. Rename acpi_tb_verify_table() to acpi_tb_validate_table() to clarify this change. 2. Rename acpi_tb_table_override() to acpi_tb_override_table() to keep nameing consistencies as other APIs (verb. Table). 3. Stops setting struct acpi_table_desc.Pointer in acpi_tb_install_table() and acpi_tb_table_override(). 4. Introduce acpi_tb_acquire_table() to acquire the table pointer that is not maintained in the struct acpi_table_desc of the global root table list and rewrite acpi_tb_validate_table() using this new function to reduce redundancies. 5. Replace the table pointer using the overridden table pointer in acpi_tb_add_table(). As acpi_tb_add_table() is not invoked during early boot stage, tables returned from this functions should be "VALIDATED". As acpi_tb_override_table() is modified by this patch to return a "INSTALLED" but not "VALIDATED" descriptor, to keep acpi_tb_add_table() unchanged, struct acpi_table_desc.Pointer is filled in acpi_tb_add_table(). B. For invalidation and uninstallation: The original code invalidate table by invoking acpi_tb_delete_table() here and there, but actually this function should only be used to uninstall tables. This can work just because its invocations are equivalent to invalidation in some cases. This patch splits acpi_tb_delete_table() into acpi_tb_invalidate_table() and acpi_tb_uninstall_table() and cleans up the hidden logic using the new APIs. This is achieved by: 1. Rename acpi_tb_delete_table() to acpi_tb_uninstall_table() as it is mainly called before resetting struct acpi_table_desc.Address. Thus the table descriptor is in "not INSTALLED" state. This patch enforces this by setting struct acpi_table_desc.Address to NULL in this function. 2. Introduce acpi_tb_invalidate_table() to be the reversal of acpi_tb_validate_table() and invoke it in acpi_tb_uninstall_table(). 3. Introduce acpi_tb_release_table() to release the table pointer that is not maintained in acpi_gbl_root_table_list and rewrite acpi_tb_invalidate_table() using this new function to reduce redundancies. After cleaning up, the maintainability of the internal APIs are also improved: 1. acpi_tb_acquire_table: Acquire struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 2. acpi_tb_release_table: Release struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 3. acpi_tb_install_table: Make struct acpi_table_desc.Address not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 4. acpi_tb_uninstall_table: Make struct acpi_table_desc.Address NULL according to ACPI_TABLE_ORIGIN_xxx flags. 5. acpi_tb_validate_table: Make struct acpi_table_desc.Pointer not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 6. acpi_tb_invalidate_table: Make struct acpi_table_desc.Pointer NULL according to ACPI_TABLE_ORIGIN_xxx flags. 7. acpi_tb_override_table: Replace struct acpi_table_desc.Address and struct acpi_table_desc.Flags. It only happens in "INSTALLED" state. The patch has been unit tested in acpi_exec by: 1. Initializing; 2. Executing exc_tbl ASLTS tests; 3. Executing "Load" command. So that all original acpi_tb_install_table() and acpi_tb_override_table() invocations are covered. Known Issues: 1. Cleanup acpi_tb_add_table() to Kill Code Redundancies Current implementation in acpi_tb_add_table() is not very clean, further patch can rewrite acpi_tb_add_table() with ordered acpi_tb_install_table(), acpi_tb_override_table() and acpi_tb_validate_table(). It is not done in this patch so that it is easy for the reviewers to understand the changes in this patch. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:42 +08:00
/* Table must be installed */
ACPICA: Tables: Clean up split INSTALLED/VALIDATED table state logics. This patch is mainly a naming cleanup to clarify hidden logics, no functional changes. acpi_initialize_tables() is used by Linux to install table addresses for early boot steps. During this stage, table addresses are mapped by early_ioremap() mechanism which is different from the runtime IO mappings. Thus it is not safe for ACPICA to keep mapped pointers in struct acpi_table_desc structure during this stage. In order to support this in ACPICA, table states are divided into 1. "INSTALLED" (where struct acpi_table_desc.Pointer is always NULL) and 2. "VALIDATED" (where struct acpi_table_desc.Pointer is always not NULL). During acpi_initialize_tables(), table state are ensured to be "INSTALLED" but not "VALIDATED". This logic is ensured by the original code in very ambigious way. For example, currently acpi_tb_delete_table() is invoked in some place to perform an uninstallation while it is invoked in other place to perform an invalidation. They happen to work just because no one enters the penalty where the 2 behaviours are not equivalent. The naming cleanups are made in this patch: A. For installation and validation: There is code setting struct acpi_table_desc.Pointer first and delete it immediately to keep the descriptor's state as "INSTALLED" during the installation. This patch implements this in more direct way. After applying it, struct acpi_table_desc.Pointer will never be set in acpi_tb_install_table() and acpi_tb_override_table() as they are the only functions invoked during acpi_initialize_tables(). This is achieved by: 1. Rename acpi_tb_verify_table() to acpi_tb_validate_table() to clarify this change. 2. Rename acpi_tb_table_override() to acpi_tb_override_table() to keep nameing consistencies as other APIs (verb. Table). 3. Stops setting struct acpi_table_desc.Pointer in acpi_tb_install_table() and acpi_tb_table_override(). 4. Introduce acpi_tb_acquire_table() to acquire the table pointer that is not maintained in the struct acpi_table_desc of the global root table list and rewrite acpi_tb_validate_table() using this new function to reduce redundancies. 5. Replace the table pointer using the overridden table pointer in acpi_tb_add_table(). As acpi_tb_add_table() is not invoked during early boot stage, tables returned from this functions should be "VALIDATED". As acpi_tb_override_table() is modified by this patch to return a "INSTALLED" but not "VALIDATED" descriptor, to keep acpi_tb_add_table() unchanged, struct acpi_table_desc.Pointer is filled in acpi_tb_add_table(). B. For invalidation and uninstallation: The original code invalidate table by invoking acpi_tb_delete_table() here and there, but actually this function should only be used to uninstall tables. This can work just because its invocations are equivalent to invalidation in some cases. This patch splits acpi_tb_delete_table() into acpi_tb_invalidate_table() and acpi_tb_uninstall_table() and cleans up the hidden logic using the new APIs. This is achieved by: 1. Rename acpi_tb_delete_table() to acpi_tb_uninstall_table() as it is mainly called before resetting struct acpi_table_desc.Address. Thus the table descriptor is in "not INSTALLED" state. This patch enforces this by setting struct acpi_table_desc.Address to NULL in this function. 2. Introduce acpi_tb_invalidate_table() to be the reversal of acpi_tb_validate_table() and invoke it in acpi_tb_uninstall_table(). 3. Introduce acpi_tb_release_table() to release the table pointer that is not maintained in acpi_gbl_root_table_list and rewrite acpi_tb_invalidate_table() using this new function to reduce redundancies. After cleaning up, the maintainability of the internal APIs are also improved: 1. acpi_tb_acquire_table: Acquire struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 2. acpi_tb_release_table: Release struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 3. acpi_tb_install_table: Make struct acpi_table_desc.Address not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 4. acpi_tb_uninstall_table: Make struct acpi_table_desc.Address NULL according to ACPI_TABLE_ORIGIN_xxx flags. 5. acpi_tb_validate_table: Make struct acpi_table_desc.Pointer not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 6. acpi_tb_invalidate_table: Make struct acpi_table_desc.Pointer NULL according to ACPI_TABLE_ORIGIN_xxx flags. 7. acpi_tb_override_table: Replace struct acpi_table_desc.Address and struct acpi_table_desc.Flags. It only happens in "INSTALLED" state. The patch has been unit tested in acpi_exec by: 1. Initializing; 2. Executing exc_tbl ASLTS tests; 3. Executing "Load" command. So that all original acpi_tb_install_table() and acpi_tb_override_table() invocations are covered. Known Issues: 1. Cleanup acpi_tb_add_table() to Kill Code Redundancies Current implementation in acpi_tb_add_table() is not very clean, further patch can rewrite acpi_tb_add_table() with ordered acpi_tb_install_table(), acpi_tb_override_table() and acpi_tb_validate_table(). It is not done in this patch so that it is easy for the reviewers to understand the changes in this patch. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:42 +08:00
if (!table_desc->address) {
return_VOID;
}
ACPICA: Tables: Clean up split INSTALLED/VALIDATED table state logics. This patch is mainly a naming cleanup to clarify hidden logics, no functional changes. acpi_initialize_tables() is used by Linux to install table addresses for early boot steps. During this stage, table addresses are mapped by early_ioremap() mechanism which is different from the runtime IO mappings. Thus it is not safe for ACPICA to keep mapped pointers in struct acpi_table_desc structure during this stage. In order to support this in ACPICA, table states are divided into 1. "INSTALLED" (where struct acpi_table_desc.Pointer is always NULL) and 2. "VALIDATED" (where struct acpi_table_desc.Pointer is always not NULL). During acpi_initialize_tables(), table state are ensured to be "INSTALLED" but not "VALIDATED". This logic is ensured by the original code in very ambigious way. For example, currently acpi_tb_delete_table() is invoked in some place to perform an uninstallation while it is invoked in other place to perform an invalidation. They happen to work just because no one enters the penalty where the 2 behaviours are not equivalent. The naming cleanups are made in this patch: A. For installation and validation: There is code setting struct acpi_table_desc.Pointer first and delete it immediately to keep the descriptor's state as "INSTALLED" during the installation. This patch implements this in more direct way. After applying it, struct acpi_table_desc.Pointer will never be set in acpi_tb_install_table() and acpi_tb_override_table() as they are the only functions invoked during acpi_initialize_tables(). This is achieved by: 1. Rename acpi_tb_verify_table() to acpi_tb_validate_table() to clarify this change. 2. Rename acpi_tb_table_override() to acpi_tb_override_table() to keep nameing consistencies as other APIs (verb. Table). 3. Stops setting struct acpi_table_desc.Pointer in acpi_tb_install_table() and acpi_tb_table_override(). 4. Introduce acpi_tb_acquire_table() to acquire the table pointer that is not maintained in the struct acpi_table_desc of the global root table list and rewrite acpi_tb_validate_table() using this new function to reduce redundancies. 5. Replace the table pointer using the overridden table pointer in acpi_tb_add_table(). As acpi_tb_add_table() is not invoked during early boot stage, tables returned from this functions should be "VALIDATED". As acpi_tb_override_table() is modified by this patch to return a "INSTALLED" but not "VALIDATED" descriptor, to keep acpi_tb_add_table() unchanged, struct acpi_table_desc.Pointer is filled in acpi_tb_add_table(). B. For invalidation and uninstallation: The original code invalidate table by invoking acpi_tb_delete_table() here and there, but actually this function should only be used to uninstall tables. This can work just because its invocations are equivalent to invalidation in some cases. This patch splits acpi_tb_delete_table() into acpi_tb_invalidate_table() and acpi_tb_uninstall_table() and cleans up the hidden logic using the new APIs. This is achieved by: 1. Rename acpi_tb_delete_table() to acpi_tb_uninstall_table() as it is mainly called before resetting struct acpi_table_desc.Address. Thus the table descriptor is in "not INSTALLED" state. This patch enforces this by setting struct acpi_table_desc.Address to NULL in this function. 2. Introduce acpi_tb_invalidate_table() to be the reversal of acpi_tb_validate_table() and invoke it in acpi_tb_uninstall_table(). 3. Introduce acpi_tb_release_table() to release the table pointer that is not maintained in acpi_gbl_root_table_list and rewrite acpi_tb_invalidate_table() using this new function to reduce redundancies. After cleaning up, the maintainability of the internal APIs are also improved: 1. acpi_tb_acquire_table: Acquire struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 2. acpi_tb_release_table: Release struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 3. acpi_tb_install_table: Make struct acpi_table_desc.Address not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 4. acpi_tb_uninstall_table: Make struct acpi_table_desc.Address NULL according to ACPI_TABLE_ORIGIN_xxx flags. 5. acpi_tb_validate_table: Make struct acpi_table_desc.Pointer not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 6. acpi_tb_invalidate_table: Make struct acpi_table_desc.Pointer NULL according to ACPI_TABLE_ORIGIN_xxx flags. 7. acpi_tb_override_table: Replace struct acpi_table_desc.Address and struct acpi_table_desc.Flags. It only happens in "INSTALLED" state. The patch has been unit tested in acpi_exec by: 1. Initializing; 2. Executing exc_tbl ASLTS tests; 3. Executing "Load" command. So that all original acpi_tb_install_table() and acpi_tb_override_table() invocations are covered. Known Issues: 1. Cleanup acpi_tb_add_table() to Kill Code Redundancies Current implementation in acpi_tb_add_table() is not very clean, further patch can rewrite acpi_tb_add_table() with ordered acpi_tb_install_table(), acpi_tb_override_table() and acpi_tb_validate_table(). It is not done in this patch so that it is easy for the reviewers to understand the changes in this patch. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:42 +08:00
acpi_tb_invalidate_table(table_desc);
ACPICA: Tables: Clean up split INSTALLED/VALIDATED table state logics. This patch is mainly a naming cleanup to clarify hidden logics, no functional changes. acpi_initialize_tables() is used by Linux to install table addresses for early boot steps. During this stage, table addresses are mapped by early_ioremap() mechanism which is different from the runtime IO mappings. Thus it is not safe for ACPICA to keep mapped pointers in struct acpi_table_desc structure during this stage. In order to support this in ACPICA, table states are divided into 1. "INSTALLED" (where struct acpi_table_desc.Pointer is always NULL) and 2. "VALIDATED" (where struct acpi_table_desc.Pointer is always not NULL). During acpi_initialize_tables(), table state are ensured to be "INSTALLED" but not "VALIDATED". This logic is ensured by the original code in very ambigious way. For example, currently acpi_tb_delete_table() is invoked in some place to perform an uninstallation while it is invoked in other place to perform an invalidation. They happen to work just because no one enters the penalty where the 2 behaviours are not equivalent. The naming cleanups are made in this patch: A. For installation and validation: There is code setting struct acpi_table_desc.Pointer first and delete it immediately to keep the descriptor's state as "INSTALLED" during the installation. This patch implements this in more direct way. After applying it, struct acpi_table_desc.Pointer will never be set in acpi_tb_install_table() and acpi_tb_override_table() as they are the only functions invoked during acpi_initialize_tables(). This is achieved by: 1. Rename acpi_tb_verify_table() to acpi_tb_validate_table() to clarify this change. 2. Rename acpi_tb_table_override() to acpi_tb_override_table() to keep nameing consistencies as other APIs (verb. Table). 3. Stops setting struct acpi_table_desc.Pointer in acpi_tb_install_table() and acpi_tb_table_override(). 4. Introduce acpi_tb_acquire_table() to acquire the table pointer that is not maintained in the struct acpi_table_desc of the global root table list and rewrite acpi_tb_validate_table() using this new function to reduce redundancies. 5. Replace the table pointer using the overridden table pointer in acpi_tb_add_table(). As acpi_tb_add_table() is not invoked during early boot stage, tables returned from this functions should be "VALIDATED". As acpi_tb_override_table() is modified by this patch to return a "INSTALLED" but not "VALIDATED" descriptor, to keep acpi_tb_add_table() unchanged, struct acpi_table_desc.Pointer is filled in acpi_tb_add_table(). B. For invalidation and uninstallation: The original code invalidate table by invoking acpi_tb_delete_table() here and there, but actually this function should only be used to uninstall tables. This can work just because its invocations are equivalent to invalidation in some cases. This patch splits acpi_tb_delete_table() into acpi_tb_invalidate_table() and acpi_tb_uninstall_table() and cleans up the hidden logic using the new APIs. This is achieved by: 1. Rename acpi_tb_delete_table() to acpi_tb_uninstall_table() as it is mainly called before resetting struct acpi_table_desc.Address. Thus the table descriptor is in "not INSTALLED" state. This patch enforces this by setting struct acpi_table_desc.Address to NULL in this function. 2. Introduce acpi_tb_invalidate_table() to be the reversal of acpi_tb_validate_table() and invoke it in acpi_tb_uninstall_table(). 3. Introduce acpi_tb_release_table() to release the table pointer that is not maintained in acpi_gbl_root_table_list and rewrite acpi_tb_invalidate_table() using this new function to reduce redundancies. After cleaning up, the maintainability of the internal APIs are also improved: 1. acpi_tb_acquire_table: Acquire struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 2. acpi_tb_release_table: Release struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 3. acpi_tb_install_table: Make struct acpi_table_desc.Address not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 4. acpi_tb_uninstall_table: Make struct acpi_table_desc.Address NULL according to ACPI_TABLE_ORIGIN_xxx flags. 5. acpi_tb_validate_table: Make struct acpi_table_desc.Pointer not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 6. acpi_tb_invalidate_table: Make struct acpi_table_desc.Pointer NULL according to ACPI_TABLE_ORIGIN_xxx flags. 7. acpi_tb_override_table: Replace struct acpi_table_desc.Address and struct acpi_table_desc.Flags. It only happens in "INSTALLED" state. The patch has been unit tested in acpi_exec by: 1. Initializing; 2. Executing exc_tbl ASLTS tests; 3. Executing "Load" command. So that all original acpi_tb_install_table() and acpi_tb_override_table() invocations are covered. Known Issues: 1. Cleanup acpi_tb_add_table() to Kill Code Redundancies Current implementation in acpi_tb_add_table() is not very clean, further patch can rewrite acpi_tb_add_table() with ordered acpi_tb_install_table(), acpi_tb_override_table() and acpi_tb_validate_table(). It is not done in this patch so that it is easy for the reviewers to understand the changes in this patch. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:42 +08:00
if ((table_desc->flags & ACPI_TABLE_ORIGIN_MASK) ==
ACPI_TABLE_ORIGIN_INTERNAL_VIRTUAL) {
ACPICA: Tables: Clean up split INSTALLED/VALIDATED table state logics. This patch is mainly a naming cleanup to clarify hidden logics, no functional changes. acpi_initialize_tables() is used by Linux to install table addresses for early boot steps. During this stage, table addresses are mapped by early_ioremap() mechanism which is different from the runtime IO mappings. Thus it is not safe for ACPICA to keep mapped pointers in struct acpi_table_desc structure during this stage. In order to support this in ACPICA, table states are divided into 1. "INSTALLED" (where struct acpi_table_desc.Pointer is always NULL) and 2. "VALIDATED" (where struct acpi_table_desc.Pointer is always not NULL). During acpi_initialize_tables(), table state are ensured to be "INSTALLED" but not "VALIDATED". This logic is ensured by the original code in very ambigious way. For example, currently acpi_tb_delete_table() is invoked in some place to perform an uninstallation while it is invoked in other place to perform an invalidation. They happen to work just because no one enters the penalty where the 2 behaviours are not equivalent. The naming cleanups are made in this patch: A. For installation and validation: There is code setting struct acpi_table_desc.Pointer first and delete it immediately to keep the descriptor's state as "INSTALLED" during the installation. This patch implements this in more direct way. After applying it, struct acpi_table_desc.Pointer will never be set in acpi_tb_install_table() and acpi_tb_override_table() as they are the only functions invoked during acpi_initialize_tables(). This is achieved by: 1. Rename acpi_tb_verify_table() to acpi_tb_validate_table() to clarify this change. 2. Rename acpi_tb_table_override() to acpi_tb_override_table() to keep nameing consistencies as other APIs (verb. Table). 3. Stops setting struct acpi_table_desc.Pointer in acpi_tb_install_table() and acpi_tb_table_override(). 4. Introduce acpi_tb_acquire_table() to acquire the table pointer that is not maintained in the struct acpi_table_desc of the global root table list and rewrite acpi_tb_validate_table() using this new function to reduce redundancies. 5. Replace the table pointer using the overridden table pointer in acpi_tb_add_table(). As acpi_tb_add_table() is not invoked during early boot stage, tables returned from this functions should be "VALIDATED". As acpi_tb_override_table() is modified by this patch to return a "INSTALLED" but not "VALIDATED" descriptor, to keep acpi_tb_add_table() unchanged, struct acpi_table_desc.Pointer is filled in acpi_tb_add_table(). B. For invalidation and uninstallation: The original code invalidate table by invoking acpi_tb_delete_table() here and there, but actually this function should only be used to uninstall tables. This can work just because its invocations are equivalent to invalidation in some cases. This patch splits acpi_tb_delete_table() into acpi_tb_invalidate_table() and acpi_tb_uninstall_table() and cleans up the hidden logic using the new APIs. This is achieved by: 1. Rename acpi_tb_delete_table() to acpi_tb_uninstall_table() as it is mainly called before resetting struct acpi_table_desc.Address. Thus the table descriptor is in "not INSTALLED" state. This patch enforces this by setting struct acpi_table_desc.Address to NULL in this function. 2. Introduce acpi_tb_invalidate_table() to be the reversal of acpi_tb_validate_table() and invoke it in acpi_tb_uninstall_table(). 3. Introduce acpi_tb_release_table() to release the table pointer that is not maintained in acpi_gbl_root_table_list and rewrite acpi_tb_invalidate_table() using this new function to reduce redundancies. After cleaning up, the maintainability of the internal APIs are also improved: 1. acpi_tb_acquire_table: Acquire struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 2. acpi_tb_release_table: Release struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 3. acpi_tb_install_table: Make struct acpi_table_desc.Address not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 4. acpi_tb_uninstall_table: Make struct acpi_table_desc.Address NULL according to ACPI_TABLE_ORIGIN_xxx flags. 5. acpi_tb_validate_table: Make struct acpi_table_desc.Pointer not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 6. acpi_tb_invalidate_table: Make struct acpi_table_desc.Pointer NULL according to ACPI_TABLE_ORIGIN_xxx flags. 7. acpi_tb_override_table: Replace struct acpi_table_desc.Address and struct acpi_table_desc.Flags. It only happens in "INSTALLED" state. The patch has been unit tested in acpi_exec by: 1. Initializing; 2. Executing exc_tbl ASLTS tests; 3. Executing "Load" command. So that all original acpi_tb_install_table() and acpi_tb_override_table() invocations are covered. Known Issues: 1. Cleanup acpi_tb_add_table() to Kill Code Redundancies Current implementation in acpi_tb_add_table() is not very clean, further patch can rewrite acpi_tb_add_table() with ordered acpi_tb_install_table(), acpi_tb_override_table() and acpi_tb_validate_table(). It is not done in this patch so that it is easy for the reviewers to understand the changes in this patch. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:42 +08:00
ACPI_FREE(ACPI_CAST_PTR(void, table_desc->address));
}
ACPICA: Tables: Clean up split INSTALLED/VALIDATED table state logics. This patch is mainly a naming cleanup to clarify hidden logics, no functional changes. acpi_initialize_tables() is used by Linux to install table addresses for early boot steps. During this stage, table addresses are mapped by early_ioremap() mechanism which is different from the runtime IO mappings. Thus it is not safe for ACPICA to keep mapped pointers in struct acpi_table_desc structure during this stage. In order to support this in ACPICA, table states are divided into 1. "INSTALLED" (where struct acpi_table_desc.Pointer is always NULL) and 2. "VALIDATED" (where struct acpi_table_desc.Pointer is always not NULL). During acpi_initialize_tables(), table state are ensured to be "INSTALLED" but not "VALIDATED". This logic is ensured by the original code in very ambigious way. For example, currently acpi_tb_delete_table() is invoked in some place to perform an uninstallation while it is invoked in other place to perform an invalidation. They happen to work just because no one enters the penalty where the 2 behaviours are not equivalent. The naming cleanups are made in this patch: A. For installation and validation: There is code setting struct acpi_table_desc.Pointer first and delete it immediately to keep the descriptor's state as "INSTALLED" during the installation. This patch implements this in more direct way. After applying it, struct acpi_table_desc.Pointer will never be set in acpi_tb_install_table() and acpi_tb_override_table() as they are the only functions invoked during acpi_initialize_tables(). This is achieved by: 1. Rename acpi_tb_verify_table() to acpi_tb_validate_table() to clarify this change. 2. Rename acpi_tb_table_override() to acpi_tb_override_table() to keep nameing consistencies as other APIs (verb. Table). 3. Stops setting struct acpi_table_desc.Pointer in acpi_tb_install_table() and acpi_tb_table_override(). 4. Introduce acpi_tb_acquire_table() to acquire the table pointer that is not maintained in the struct acpi_table_desc of the global root table list and rewrite acpi_tb_validate_table() using this new function to reduce redundancies. 5. Replace the table pointer using the overridden table pointer in acpi_tb_add_table(). As acpi_tb_add_table() is not invoked during early boot stage, tables returned from this functions should be "VALIDATED". As acpi_tb_override_table() is modified by this patch to return a "INSTALLED" but not "VALIDATED" descriptor, to keep acpi_tb_add_table() unchanged, struct acpi_table_desc.Pointer is filled in acpi_tb_add_table(). B. For invalidation and uninstallation: The original code invalidate table by invoking acpi_tb_delete_table() here and there, but actually this function should only be used to uninstall tables. This can work just because its invocations are equivalent to invalidation in some cases. This patch splits acpi_tb_delete_table() into acpi_tb_invalidate_table() and acpi_tb_uninstall_table() and cleans up the hidden logic using the new APIs. This is achieved by: 1. Rename acpi_tb_delete_table() to acpi_tb_uninstall_table() as it is mainly called before resetting struct acpi_table_desc.Address. Thus the table descriptor is in "not INSTALLED" state. This patch enforces this by setting struct acpi_table_desc.Address to NULL in this function. 2. Introduce acpi_tb_invalidate_table() to be the reversal of acpi_tb_validate_table() and invoke it in acpi_tb_uninstall_table(). 3. Introduce acpi_tb_release_table() to release the table pointer that is not maintained in acpi_gbl_root_table_list and rewrite acpi_tb_invalidate_table() using this new function to reduce redundancies. After cleaning up, the maintainability of the internal APIs are also improved: 1. acpi_tb_acquire_table: Acquire struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 2. acpi_tb_release_table: Release struct acpi_table_header according to ACPI_TABLE_ORIGIN_xxx flags. 3. acpi_tb_install_table: Make struct acpi_table_desc.Address not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 4. acpi_tb_uninstall_table: Make struct acpi_table_desc.Address NULL according to ACPI_TABLE_ORIGIN_xxx flags. 5. acpi_tb_validate_table: Make struct acpi_table_desc.Pointer not NULL according to ACPI_TABLE_ORIGIN_xxx flags. 6. acpi_tb_invalidate_table: Make struct acpi_table_desc.Pointer NULL according to ACPI_TABLE_ORIGIN_xxx flags. 7. acpi_tb_override_table: Replace struct acpi_table_desc.Address and struct acpi_table_desc.Flags. It only happens in "INSTALLED" state. The patch has been unit tested in acpi_exec by: 1. Initializing; 2. Executing exc_tbl ASLTS tests; 3. Executing "Load" command. So that all original acpi_tb_install_table() and acpi_tb_override_table() invocations are covered. Known Issues: 1. Cleanup acpi_tb_add_table() to Kill Code Redundancies Current implementation in acpi_tb_add_table() is not very clean, further patch can rewrite acpi_tb_add_table() with ordered acpi_tb_install_table(), acpi_tb_override_table() and acpi_tb_validate_table(). It is not done in this patch so that it is easy for the reviewers to understand the changes in this patch. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-04-04 12:38:42 +08:00
table_desc->address = ACPI_PTR_TO_PHYSADDR(NULL);
return_VOID;
}