OpenCloudOS-Kernel/drivers/net/netdevsim/dev.c

1643 lines
46 KiB
C
Raw Normal View History

netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
/*
* Copyright (c) 2018 Cumulus Networks. All rights reserved.
* Copyright (c) 2018 David Ahern <dsa@cumulusnetworks.com>
* Copyright (c) 2019 Mellanox Technologies. All rights reserved.
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
*
* This software is licensed under the GNU General License Version 2,
* June 1991 as shown in the file COPYING in the top-level directory of this
* source tree.
*
* THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS"
* WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING,
* BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE
* OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME
* THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
*/
#include <linux/debugfs.h>
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
#include <linux/device.h>
#include <linux/etherdevice.h>
#include <linux/inet.h>
#include <linux/jiffies.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/mutex.h>
#include <linux/random.h>
#include <linux/rtnetlink.h>
#include <linux/workqueue.h>
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
#include <net/devlink.h>
#include <net/ip.h>
#include <net/flow_offload.h>
#include <uapi/linux/devlink.h>
#include <uapi/linux/ip.h>
#include <uapi/linux/udp.h>
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
#include "netdevsim.h"
static unsigned int
nsim_dev_port_index(enum nsim_dev_port_type type, unsigned int port_index)
{
switch (type) {
case NSIM_DEV_PORT_TYPE_VF:
port_index = NSIM_DEV_VF_PORT_INDEX_BASE + port_index;
break;
case NSIM_DEV_PORT_TYPE_PF:
break;
}
return port_index;
}
static inline unsigned int nsim_dev_port_index_to_vf_index(unsigned int port_index)
{
return port_index - NSIM_DEV_VF_PORT_INDEX_BASE;
}
static struct dentry *nsim_dev_ddir;
#define NSIM_DEV_DUMMY_REGION_SIZE (1024 * 32)
static int
nsim_dev_take_snapshot(struct devlink *devlink,
const struct devlink_region_ops *ops,
struct netlink_ext_ack *extack,
u8 **data)
{
void *dummy_data;
dummy_data = kmalloc(NSIM_DEV_DUMMY_REGION_SIZE, GFP_KERNEL);
if (!dummy_data)
return -ENOMEM;
get_random_bytes(dummy_data, NSIM_DEV_DUMMY_REGION_SIZE);
*data = dummy_data;
return 0;
}
static ssize_t nsim_dev_take_snapshot_write(struct file *file,
const char __user *data,
size_t count, loff_t *ppos)
{
struct nsim_dev *nsim_dev = file->private_data;
devlink: track snapshot id usage count using an xarray Each snapshot created for a devlink region must have an id. These ids are supposed to be unique per "event" that caused the snapshot to be created. Drivers call devlink_region_snapshot_id_get to obtain a new id to use for a new event trigger. The id values are tracked per devlink, so that the same id number can be used if a triggering event creates multiple snapshots on different regions. There is no mechanism for snapshot ids to ever be reused. Introduce an xarray to store the count of how many snapshots are using a given id, replacing the snapshot_id field previously used for picking the next id. The devlink_region_snapshot_id_get() function will use xa_alloc to insert an initial value of 1 value at an available slot between 0 and U32_MAX. The new __devlink_snapshot_id_increment() and __devlink_snapshot_id_decrement() functions will be used to track how many snapshots currently use an id. Drivers must now call devlink_snapshot_id_put() in order to release their reference of the snapshot id after adding region snapshots. By tracking the total number of snapshots using a given id, it is possible for the decrement() function to erase the id from the xarray when it is not in use. With this method, a snapshot id can become reused again once all snapshots that referred to it have been deleted via DEVLINK_CMD_REGION_DEL, and the driver has finished adding snapshots. This work also paves the way to introduce a mechanism for userspace to request a snapshot. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27 02:37:15 +08:00
struct devlink *devlink;
u8 *dummy_data;
int err;
u32 id;
devlink: track snapshot id usage count using an xarray Each snapshot created for a devlink region must have an id. These ids are supposed to be unique per "event" that caused the snapshot to be created. Drivers call devlink_region_snapshot_id_get to obtain a new id to use for a new event trigger. The id values are tracked per devlink, so that the same id number can be used if a triggering event creates multiple snapshots on different regions. There is no mechanism for snapshot ids to ever be reused. Introduce an xarray to store the count of how many snapshots are using a given id, replacing the snapshot_id field previously used for picking the next id. The devlink_region_snapshot_id_get() function will use xa_alloc to insert an initial value of 1 value at an available slot between 0 and U32_MAX. The new __devlink_snapshot_id_increment() and __devlink_snapshot_id_decrement() functions will be used to track how many snapshots currently use an id. Drivers must now call devlink_snapshot_id_put() in order to release their reference of the snapshot id after adding region snapshots. By tracking the total number of snapshots using a given id, it is possible for the decrement() function to erase the id from the xarray when it is not in use. With this method, a snapshot id can become reused again once all snapshots that referred to it have been deleted via DEVLINK_CMD_REGION_DEL, and the driver has finished adding snapshots. This work also paves the way to introduce a mechanism for userspace to request a snapshot. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27 02:37:15 +08:00
devlink = priv_to_devlink(nsim_dev);
err = nsim_dev_take_snapshot(devlink, NULL, NULL, &dummy_data);
if (err)
return err;
devlink: track snapshot id usage count using an xarray Each snapshot created for a devlink region must have an id. These ids are supposed to be unique per "event" that caused the snapshot to be created. Drivers call devlink_region_snapshot_id_get to obtain a new id to use for a new event trigger. The id values are tracked per devlink, so that the same id number can be used if a triggering event creates multiple snapshots on different regions. There is no mechanism for snapshot ids to ever be reused. Introduce an xarray to store the count of how many snapshots are using a given id, replacing the snapshot_id field previously used for picking the next id. The devlink_region_snapshot_id_get() function will use xa_alloc to insert an initial value of 1 value at an available slot between 0 and U32_MAX. The new __devlink_snapshot_id_increment() and __devlink_snapshot_id_decrement() functions will be used to track how many snapshots currently use an id. Drivers must now call devlink_snapshot_id_put() in order to release their reference of the snapshot id after adding region snapshots. By tracking the total number of snapshots using a given id, it is possible for the decrement() function to erase the id from the xarray when it is not in use. With this method, a snapshot id can become reused again once all snapshots that referred to it have been deleted via DEVLINK_CMD_REGION_DEL, and the driver has finished adding snapshots. This work also paves the way to introduce a mechanism for userspace to request a snapshot. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27 02:37:15 +08:00
err = devlink_region_snapshot_id_get(devlink, &id);
if (err) {
pr_err("Failed to get snapshot id\n");
kfree(dummy_data);
return err;
}
err = devlink_region_snapshot_create(nsim_dev->dummy_region,
dummy_data, id);
devlink: track snapshot id usage count using an xarray Each snapshot created for a devlink region must have an id. These ids are supposed to be unique per "event" that caused the snapshot to be created. Drivers call devlink_region_snapshot_id_get to obtain a new id to use for a new event trigger. The id values are tracked per devlink, so that the same id number can be used if a triggering event creates multiple snapshots on different regions. There is no mechanism for snapshot ids to ever be reused. Introduce an xarray to store the count of how many snapshots are using a given id, replacing the snapshot_id field previously used for picking the next id. The devlink_region_snapshot_id_get() function will use xa_alloc to insert an initial value of 1 value at an available slot between 0 and U32_MAX. The new __devlink_snapshot_id_increment() and __devlink_snapshot_id_decrement() functions will be used to track how many snapshots currently use an id. Drivers must now call devlink_snapshot_id_put() in order to release their reference of the snapshot id after adding region snapshots. By tracking the total number of snapshots using a given id, it is possible for the decrement() function to erase the id from the xarray when it is not in use. With this method, a snapshot id can become reused again once all snapshots that referred to it have been deleted via DEVLINK_CMD_REGION_DEL, and the driver has finished adding snapshots. This work also paves the way to introduce a mechanism for userspace to request a snapshot. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27 02:37:15 +08:00
devlink_region_snapshot_id_put(devlink, id);
if (err) {
pr_err("Failed to create region snapshot\n");
kfree(dummy_data);
return err;
}
return count;
}
static const struct file_operations nsim_dev_take_snapshot_fops = {
.open = simple_open,
.write = nsim_dev_take_snapshot_write,
.llseek = generic_file_llseek,
.owner = THIS_MODULE,
};
static ssize_t nsim_dev_trap_fa_cookie_read(struct file *file,
char __user *data,
size_t count, loff_t *ppos)
{
struct nsim_dev *nsim_dev = file->private_data;
struct flow_action_cookie *fa_cookie;
unsigned int buf_len;
ssize_t ret;
char *buf;
spin_lock(&nsim_dev->fa_cookie_lock);
fa_cookie = nsim_dev->fa_cookie;
if (!fa_cookie) {
ret = -EINVAL;
goto errout;
}
buf_len = fa_cookie->cookie_len * 2;
buf = kmalloc(buf_len, GFP_ATOMIC);
if (!buf) {
ret = -ENOMEM;
goto errout;
}
bin2hex(buf, fa_cookie->cookie, fa_cookie->cookie_len);
spin_unlock(&nsim_dev->fa_cookie_lock);
ret = simple_read_from_buffer(data, count, ppos, buf, buf_len);
kfree(buf);
return ret;
errout:
spin_unlock(&nsim_dev->fa_cookie_lock);
return ret;
}
static ssize_t nsim_dev_trap_fa_cookie_write(struct file *file,
const char __user *data,
size_t count, loff_t *ppos)
{
struct nsim_dev *nsim_dev = file->private_data;
struct flow_action_cookie *fa_cookie;
size_t cookie_len;
ssize_t ret;
char *buf;
if (*ppos != 0)
return -EINVAL;
cookie_len = (count - 1) / 2;
if ((count - 1) % 2)
return -EINVAL;
buf = kmalloc(count, GFP_KERNEL | __GFP_NOWARN);
if (!buf)
return -ENOMEM;
ret = simple_write_to_buffer(buf, count, ppos, data, count);
if (ret < 0)
goto free_buf;
fa_cookie = kmalloc(sizeof(*fa_cookie) + cookie_len,
GFP_KERNEL | __GFP_NOWARN);
if (!fa_cookie) {
ret = -ENOMEM;
goto free_buf;
}
fa_cookie->cookie_len = cookie_len;
ret = hex2bin(fa_cookie->cookie, buf, cookie_len);
if (ret)
goto free_fa_cookie;
kfree(buf);
spin_lock(&nsim_dev->fa_cookie_lock);
kfree(nsim_dev->fa_cookie);
nsim_dev->fa_cookie = fa_cookie;
spin_unlock(&nsim_dev->fa_cookie_lock);
return count;
free_fa_cookie:
kfree(fa_cookie);
free_buf:
kfree(buf);
return ret;
}
static const struct file_operations nsim_dev_trap_fa_cookie_fops = {
.open = simple_open,
.read = nsim_dev_trap_fa_cookie_read,
.write = nsim_dev_trap_fa_cookie_write,
.llseek = generic_file_llseek,
.owner = THIS_MODULE,
};
static const struct file_operations nsim_dev_max_vfs_fops = {
.open = simple_open,
.read = nsim_bus_dev_max_vfs_read,
.write = nsim_bus_dev_max_vfs_write,
.llseek = generic_file_llseek,
.owner = THIS_MODULE,
};
static int nsim_dev_debugfs_init(struct nsim_dev *nsim_dev)
{
netdevsim: fix stack-out-of-bounds in nsim_dev_debugfs_init() When netdevsim dev is being created, a debugfs directory is created. The variable "dev_ddir_name" is 16bytes device name pointer and device name is "netdevsim<dev id>". The maximum dev id length is 10. So, 16bytes for device name isn't enough. Test commands: modprobe netdevsim echo "1000000000 0" > /sys/bus/netdevsim/new_device Splat looks like: [ 249.622710][ T900] BUG: KASAN: stack-out-of-bounds in number+0x824/0x880 [ 249.623658][ T900] Write of size 1 at addr ffff88804c527988 by task bash/900 [ 249.624521][ T900] [ 249.624830][ T900] CPU: 1 PID: 900 Comm: bash Not tainted 5.5.0+ #322 [ 249.625691][ T900] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 249.626712][ T900] Call Trace: [ 249.627103][ T900] dump_stack+0x96/0xdb [ 249.627639][ T900] ? number+0x824/0x880 [ 249.628173][ T900] print_address_description.constprop.5+0x1be/0x360 [ 249.629022][ T900] ? number+0x824/0x880 [ 249.629569][ T900] ? number+0x824/0x880 [ 249.630105][ T900] __kasan_report+0x12a/0x170 [ 249.630717][ T900] ? number+0x824/0x880 [ 249.631201][ T900] kasan_report+0xe/0x20 [ 249.631723][ T900] number+0x824/0x880 [ 249.632235][ T900] ? put_dec+0xa0/0xa0 [ 249.632716][ T900] ? rcu_read_lock_sched_held+0x90/0xc0 [ 249.633392][ T900] vsnprintf+0x63c/0x10b0 [ 249.633983][ T900] ? pointer+0x5b0/0x5b0 [ 249.634543][ T900] ? mark_lock+0x11d/0xc40 [ 249.635200][ T900] sprintf+0x9b/0xd0 [ 249.635750][ T900] ? scnprintf+0xe0/0xe0 [ 249.636370][ T900] nsim_dev_probe+0x63c/0xbf0 [netdevsim] [ ... ] Reviewed-by: Jakub Kicinski <kuba@kernel.org> Fixes: ab1d0cc004d7 ("netdevsim: change debugfs tree topology") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-02 00:43:22 +08:00
char dev_ddir_name[sizeof(DRV_NAME) + 10];
int err;
sprintf(dev_ddir_name, DRV_NAME "%u", nsim_dev->nsim_bus_dev->dev.id);
nsim_dev->ddir = debugfs_create_dir(dev_ddir_name, nsim_dev_ddir);
if (IS_ERR(nsim_dev->ddir))
return PTR_ERR(nsim_dev->ddir);
nsim_dev->ports_ddir = debugfs_create_dir("ports", nsim_dev->ddir);
if (IS_ERR(nsim_dev->ports_ddir))
return PTR_ERR(nsim_dev->ports_ddir);
debugfs_create_bool("fw_update_status", 0600, nsim_dev->ddir,
&nsim_dev->fw_update_status);
debugfs_create_u32("fw_update_overwrite_mask", 0600, nsim_dev->ddir,
&nsim_dev->fw_update_overwrite_mask);
debugfs_create_u32("max_macs", 0600, nsim_dev->ddir,
&nsim_dev->max_macs);
debugfs_create_bool("test1", 0600, nsim_dev->ddir,
&nsim_dev->test1);
netdevsim: fix panic in nsim_dev_take_snapshot_write() nsim_dev_take_snapshot_write() uses nsim_dev and nsim_dev->dummy_region. So, during this function, these data shouldn't be removed. But there is no protecting stuff in this function. There are two similar cases. 1. reload case reload could be called during nsim_dev_take_snapshot_write(). When reload is being executed, nsim_dev_reload_down() is called and it calls nsim_dev_reload_destroy(). nsim_dev_reload_destroy() calls devlink_region_destroy() to destroy nsim_dev->dummy_region. So, during nsim_dev_take_snapshot_write(), nsim_dev->dummy_region() would be removed. At this point, snapshot_write() would access freed pointer. In order to fix this case, take_snapshot file will be removed before devlink_region_destroy(). The take_snapshot file will be re-created by ->reload_up(). 2. del_device_store case del_device_store() also could call nsim_dev_reload_destroy() during nsim_dev_take_snapshot_write(). If so, panic would occur. This problem is actually the same problem with the first case. So, this problem will be fixed by the first case's solution. Test commands: modprobe netdevsim while : do echo 1 > /sys/bus/netdevsim/new_device & echo 1 > /sys/bus/netdevsim/del_device & devlink dev reload netdevsim/netdevsim1 & echo 1 > /sys/kernel/debug/netdevsim/netdevsim1/take_snapshot & done Splat looks like: [ 45.564513][ T975] general protection fault, probably for non-canonical address 0xdffffc000000003a: 0000 [#1] SMP DEI [ 45.566131][ T975] KASAN: null-ptr-deref in range [0x00000000000001d0-0x00000000000001d7] [ 45.566135][ T975] CPU: 1 PID: 975 Comm: bash Not tainted 5.5.0+ #322 [ 45.569020][ T975] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 45.569026][ T975] RIP: 0010:__mutex_lock+0x10a/0x14b0 [ 45.570518][ T975] Code: 08 84 d2 0f 85 7f 12 00 00 44 8b 0d 10 23 65 02 45 85 c9 75 29 49 8d 7f 68 48 b8 00 00 00 0f [ 45.570522][ T975] RSP: 0018:ffff888046ccfbf0 EFLAGS: 00010206 [ 45.572305][ T975] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 45.572308][ T975] RDX: 000000000000003a RSI: ffffffffac926440 RDI: 00000000000001d0 [ 45.576843][ T975] RBP: ffff888046ccfd70 R08: ffffffffab610645 R09: 0000000000000000 [ 45.576847][ T975] R10: ffff888046ccfd90 R11: ffffed100d6360ad R12: 0000000000000000 [ 45.578471][ T975] R13: dffffc0000000000 R14: ffffffffae1976c0 R15: 0000000000000168 [ 45.578475][ T975] FS: 00007f614d6e7740(0000) GS:ffff88806c400000(0000) knlGS:0000000000000000 [ 45.581492][ T975] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 45.582942][ T975] CR2: 00005618677d1cf0 CR3: 000000005fb9c002 CR4: 00000000000606e0 [ 45.584543][ T975] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 45.586633][ T975] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 45.589889][ T975] Call Trace: [ 45.591445][ T975] ? devlink_region_snapshot_create+0x55/0x4a0 [ 45.601250][ T975] ? mutex_lock_io_nested+0x1380/0x1380 [ 45.602817][ T975] ? mutex_lock_io_nested+0x1380/0x1380 [ 45.603875][ T975] ? mark_held_locks+0xa5/0xe0 [ 45.604769][ T975] ? _raw_spin_unlock_irqrestore+0x2d/0x50 [ 45.606147][ T975] ? __mutex_unlock_slowpath+0xd0/0x670 [ 45.607723][ T975] ? crng_backtrack_protect+0x80/0x80 [ 45.613530][ T975] ? wait_for_completion+0x390/0x390 [ 45.615152][ T975] ? devlink_region_snapshot_create+0x55/0x4a0 [ 45.616834][ T975] devlink_region_snapshot_create+0x55/0x4a0 [ ... ] Fixes: 4418f862d675 ("netdevsim: implement support for devlink region and snapshots") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-02 00:43:13 +08:00
nsim_dev->take_snapshot = debugfs_create_file("take_snapshot",
0200,
nsim_dev->ddir,
nsim_dev,
&nsim_dev_take_snapshot_fops);
debugfs_create_bool("dont_allow_reload", 0600, nsim_dev->ddir,
&nsim_dev->dont_allow_reload);
debugfs_create_bool("fail_reload", 0600, nsim_dev->ddir,
&nsim_dev->fail_reload);
debugfs_create_file("trap_flow_action_cookie", 0600, nsim_dev->ddir,
nsim_dev, &nsim_dev_trap_fa_cookie_fops);
debugfs_create_bool("fail_trap_group_set", 0600,
nsim_dev->ddir,
&nsim_dev->fail_trap_group_set);
debugfs_create_bool("fail_trap_policer_set", 0600,
nsim_dev->ddir,
&nsim_dev->fail_trap_policer_set);
debugfs_create_bool("fail_trap_policer_counter_get", 0600,
nsim_dev->ddir,
&nsim_dev->fail_trap_policer_counter_get);
nsim_dev->max_vfs = debugfs_create_file("max_vfs",
0600,
nsim_dev->ddir,
nsim_dev->nsim_bus_dev,
&nsim_dev_max_vfs_fops);
nsim_dev->nodes_ddir = debugfs_create_dir("rate_nodes", nsim_dev->ddir);
if (IS_ERR(nsim_dev->nodes_ddir)) {
err = PTR_ERR(nsim_dev->nodes_ddir);
goto err_out;
}
debugfs_create_bool("fail_trap_drop_counter_get", 0600,
nsim_dev->ddir,
&nsim_dev->fail_trap_drop_counter_get);
nsim_udp_tunnels_debugfs_create(nsim_dev);
return 0;
err_out:
debugfs_remove_recursive(nsim_dev->ports_ddir);
debugfs_remove_recursive(nsim_dev->ddir);
return err;
}
static void nsim_dev_debugfs_exit(struct nsim_dev *nsim_dev)
{
debugfs_remove_recursive(nsim_dev->nodes_ddir);
debugfs_remove_recursive(nsim_dev->ports_ddir);
debugfs_remove_recursive(nsim_dev->ddir);
}
static ssize_t nsim_dev_rate_parent_read(struct file *file,
char __user *data,
size_t count, loff_t *ppos)
{
char **name_ptr = file->private_data;
size_t len;
if (!*name_ptr)
return 0;
len = strlen(*name_ptr);
return simple_read_from_buffer(data, count, ppos, *name_ptr, len);
}
static const struct file_operations nsim_dev_rate_parent_fops = {
.open = simple_open,
.read = nsim_dev_rate_parent_read,
.llseek = generic_file_llseek,
.owner = THIS_MODULE,
};
static int nsim_dev_port_debugfs_init(struct nsim_dev *nsim_dev,
struct nsim_dev_port *nsim_dev_port)
{
struct nsim_bus_dev *nsim_bus_dev = nsim_dev->nsim_bus_dev;
unsigned int port_index = nsim_dev_port->port_index;
char port_ddir_name[16];
char dev_link_name[32];
sprintf(port_ddir_name, "%u", port_index);
nsim_dev_port->ddir = debugfs_create_dir(port_ddir_name,
nsim_dev->ports_ddir);
if (IS_ERR(nsim_dev_port->ddir))
return PTR_ERR(nsim_dev_port->ddir);
sprintf(dev_link_name, "../../../" DRV_NAME "%u", nsim_bus_dev->dev.id);
if (nsim_dev_port_is_vf(nsim_dev_port)) {
unsigned int vf_id = nsim_dev_port_index_to_vf_index(port_index);
debugfs_create_u16("tx_share", 0400, nsim_dev_port->ddir,
&nsim_bus_dev->vfconfigs[vf_id].min_tx_rate);
debugfs_create_u16("tx_max", 0400, nsim_dev_port->ddir,
&nsim_bus_dev->vfconfigs[vf_id].max_tx_rate);
nsim_dev_port->rate_parent = debugfs_create_file("rate_parent",
0400,
nsim_dev_port->ddir,
&nsim_dev_port->parent_name,
&nsim_dev_rate_parent_fops);
}
debugfs_create_symlink("dev", nsim_dev_port->ddir, dev_link_name);
return 0;
}
static void nsim_dev_port_debugfs_exit(struct nsim_dev_port *nsim_dev_port)
{
debugfs_remove_recursive(nsim_dev_port->ddir);
}
static int nsim_dev_resources_register(struct devlink *devlink)
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
{
struct devlink_resource_size_params params = {
.size_max = (u64)-1,
.size_granularity = 1,
.unit = DEVLINK_RESOURCE_UNIT_ENTRY
};
int err;
/* Resources for IPv4 */
err = devlink_resource_register(devlink, "IPv4", (u64)-1,
NSIM_RESOURCE_IPV4,
DEVLINK_RESOURCE_ID_PARENT_TOP,
&params);
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
if (err) {
pr_err("Failed to register IPv4 top resource\n");
goto out;
}
err = devlink_resource_register(devlink, "fib", (u64)-1,
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
NSIM_RESOURCE_IPV4_FIB,
NSIM_RESOURCE_IPV4, &params);
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
if (err) {
pr_err("Failed to register IPv4 FIB resource\n");
return err;
}
err = devlink_resource_register(devlink, "fib-rules", (u64)-1,
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
NSIM_RESOURCE_IPV4_FIB_RULES,
NSIM_RESOURCE_IPV4, &params);
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
if (err) {
pr_err("Failed to register IPv4 FIB rules resource\n");
return err;
}
/* Resources for IPv6 */
err = devlink_resource_register(devlink, "IPv6", (u64)-1,
NSIM_RESOURCE_IPV6,
DEVLINK_RESOURCE_ID_PARENT_TOP,
&params);
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
if (err) {
pr_err("Failed to register IPv6 top resource\n");
goto out;
}
err = devlink_resource_register(devlink, "fib", (u64)-1,
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
NSIM_RESOURCE_IPV6_FIB,
NSIM_RESOURCE_IPV6, &params);
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
if (err) {
pr_err("Failed to register IPv6 FIB resource\n");
return err;
}
err = devlink_resource_register(devlink, "fib-rules", (u64)-1,
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
NSIM_RESOURCE_IPV6_FIB_RULES,
NSIM_RESOURCE_IPV6, &params);
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
if (err) {
pr_err("Failed to register IPv6 FIB rules resource\n");
return err;
}
/* Resources for nexthops */
err = devlink_resource_register(devlink, "nexthops", (u64)-1,
NSIM_RESOURCE_NEXTHOPS,
DEVLINK_RESOURCE_ID_PARENT_TOP,
&params);
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
out:
return err;
}
enum nsim_devlink_param_id {
NSIM_DEVLINK_PARAM_ID_BASE = DEVLINK_PARAM_GENERIC_ID_MAX,
NSIM_DEVLINK_PARAM_ID_TEST1,
};
static const struct devlink_param nsim_devlink_params[] = {
DEVLINK_PARAM_GENERIC(MAX_MACS,
BIT(DEVLINK_PARAM_CMODE_DRIVERINIT),
NULL, NULL, NULL),
DEVLINK_PARAM_DRIVER(NSIM_DEVLINK_PARAM_ID_TEST1,
"test1", DEVLINK_PARAM_TYPE_BOOL,
BIT(DEVLINK_PARAM_CMODE_DRIVERINIT),
NULL, NULL, NULL),
};
static void nsim_devlink_set_params_init_values(struct nsim_dev *nsim_dev,
struct devlink *devlink)
{
union devlink_param_value value;
value.vu32 = nsim_dev->max_macs;
devlink_param_driverinit_value_set(devlink,
DEVLINK_PARAM_GENERIC_ID_MAX_MACS,
value);
value.vbool = nsim_dev->test1;
devlink_param_driverinit_value_set(devlink,
NSIM_DEVLINK_PARAM_ID_TEST1,
value);
}
static void nsim_devlink_param_load_driverinit_values(struct devlink *devlink)
{
struct nsim_dev *nsim_dev = devlink_priv(devlink);
union devlink_param_value saved_value;
int err;
err = devlink_param_driverinit_value_get(devlink,
DEVLINK_PARAM_GENERIC_ID_MAX_MACS,
&saved_value);
if (!err)
nsim_dev->max_macs = saved_value.vu32;
err = devlink_param_driverinit_value_get(devlink,
NSIM_DEVLINK_PARAM_ID_TEST1,
&saved_value);
if (!err)
nsim_dev->test1 = saved_value.vbool;
}
#define NSIM_DEV_DUMMY_REGION_SNAPSHOT_MAX 16
static const struct devlink_region_ops dummy_region_ops = {
.name = "dummy",
.destructor = &kfree,
.snapshot = nsim_dev_take_snapshot,
};
static int nsim_dev_dummy_region_init(struct nsim_dev *nsim_dev,
struct devlink *devlink)
{
nsim_dev->dummy_region =
devlink_region_create(devlink, &dummy_region_ops,
NSIM_DEV_DUMMY_REGION_SNAPSHOT_MAX,
NSIM_DEV_DUMMY_REGION_SIZE);
return PTR_ERR_OR_ZERO(nsim_dev->dummy_region);
}
static void nsim_dev_dummy_region_exit(struct nsim_dev *nsim_dev)
{
devlink_region_destroy(nsim_dev->dummy_region);
}
static void __nsim_dev_port_del(struct nsim_dev_port *nsim_dev_port);
int nsim_esw_legacy_enable(struct nsim_dev *nsim_dev, struct netlink_ext_ack *extack)
{
struct devlink *devlink = priv_to_devlink(nsim_dev);
struct nsim_dev_port *nsim_dev_port, *tmp;
devlink_rate_nodes_destroy(devlink);
mutex_lock(&nsim_dev->port_list_lock);
list_for_each_entry_safe(nsim_dev_port, tmp, &nsim_dev->port_list, list)
if (nsim_dev_port_is_vf(nsim_dev_port))
__nsim_dev_port_del(nsim_dev_port);
mutex_unlock(&nsim_dev->port_list_lock);
nsim_dev->esw_mode = DEVLINK_ESWITCH_MODE_LEGACY;
return 0;
}
int nsim_esw_switchdev_enable(struct nsim_dev *nsim_dev, struct netlink_ext_ack *extack)
{
struct nsim_bus_dev *nsim_bus_dev = nsim_dev->nsim_bus_dev;
int i, err;
for (i = 0; i < nsim_bus_dev->num_vfs; i++) {
err = nsim_dev_port_add(nsim_bus_dev, NSIM_DEV_PORT_TYPE_VF, i);
if (err) {
NL_SET_ERR_MSG_MOD(extack, "Failed to initialize VFs' netdevsim ports");
pr_err("Failed to initialize VF id=%d. %d.\n", i, err);
goto err_port_add_vfs;
}
}
nsim_dev->esw_mode = DEVLINK_ESWITCH_MODE_SWITCHDEV;
return 0;
err_port_add_vfs:
for (i--; i >= 0; i--)
nsim_dev_port_del(nsim_bus_dev, NSIM_DEV_PORT_TYPE_VF, i);
return err;
}
static int nsim_devlink_eswitch_mode_set(struct devlink *devlink, u16 mode,
struct netlink_ext_ack *extack)
{
struct nsim_dev *nsim_dev = devlink_priv(devlink);
int err = 0;
mutex_lock(&nsim_dev->nsim_bus_dev->vfs_lock);
if (mode == nsim_dev->esw_mode)
goto unlock;
if (mode == DEVLINK_ESWITCH_MODE_LEGACY)
err = nsim_esw_legacy_enable(nsim_dev, extack);
else if (mode == DEVLINK_ESWITCH_MODE_SWITCHDEV)
err = nsim_esw_switchdev_enable(nsim_dev, extack);
else
err = -EINVAL;
unlock:
mutex_unlock(&nsim_dev->nsim_bus_dev->vfs_lock);
return err;
}
static int nsim_devlink_eswitch_mode_get(struct devlink *devlink, u16 *mode)
{
struct nsim_dev *nsim_dev = devlink_priv(devlink);
*mode = nsim_dev->esw_mode;
return 0;
}
struct nsim_trap_item {
void *trap_ctx;
enum devlink_trap_action action;
};
struct nsim_trap_data {
struct delayed_work trap_report_dw;
struct nsim_trap_item *trap_items_arr;
u64 *trap_policers_cnt_arr;
u64 trap_pkt_cnt;
struct nsim_dev *nsim_dev;
spinlock_t trap_lock; /* Protects trap_items_arr */
};
/* All driver-specific traps must be documented in
* Documentation/networking/devlink/netdevsim.rst
*/
enum {
NSIM_TRAP_ID_BASE = DEVLINK_TRAP_GENERIC_ID_MAX,
NSIM_TRAP_ID_FID_MISS,
};
#define NSIM_TRAP_NAME_FID_MISS "fid_miss"
#define NSIM_TRAP_METADATA DEVLINK_TRAP_METADATA_TYPE_F_IN_PORT
#define NSIM_TRAP_DROP(_id, _group_id) \
DEVLINK_TRAP_GENERIC(DROP, DROP, _id, \
DEVLINK_TRAP_GROUP_GENERIC_ID_##_group_id, \
NSIM_TRAP_METADATA)
#define NSIM_TRAP_DROP_EXT(_id, _group_id, _metadata) \
DEVLINK_TRAP_GENERIC(DROP, DROP, _id, \
DEVLINK_TRAP_GROUP_GENERIC_ID_##_group_id, \
NSIM_TRAP_METADATA | (_metadata))
#define NSIM_TRAP_EXCEPTION(_id, _group_id) \
DEVLINK_TRAP_GENERIC(EXCEPTION, TRAP, _id, \
DEVLINK_TRAP_GROUP_GENERIC_ID_##_group_id, \
NSIM_TRAP_METADATA)
#define NSIM_TRAP_CONTROL(_id, _group_id, _action) \
DEVLINK_TRAP_GENERIC(CONTROL, _action, _id, \
DEVLINK_TRAP_GROUP_GENERIC_ID_##_group_id, \
NSIM_TRAP_METADATA)
#define NSIM_TRAP_DRIVER_EXCEPTION(_id, _group_id) \
DEVLINK_TRAP_DRIVER(EXCEPTION, TRAP, NSIM_TRAP_ID_##_id, \
NSIM_TRAP_NAME_##_id, \
DEVLINK_TRAP_GROUP_GENERIC_ID_##_group_id, \
NSIM_TRAP_METADATA)
#define NSIM_DEV_TRAP_POLICER_MIN_RATE 1
#define NSIM_DEV_TRAP_POLICER_MAX_RATE 8000
#define NSIM_DEV_TRAP_POLICER_MIN_BURST 8
#define NSIM_DEV_TRAP_POLICER_MAX_BURST 65536
#define NSIM_TRAP_POLICER(_id, _rate, _burst) \
DEVLINK_TRAP_POLICER(_id, _rate, _burst, \
NSIM_DEV_TRAP_POLICER_MAX_RATE, \
NSIM_DEV_TRAP_POLICER_MIN_RATE, \
NSIM_DEV_TRAP_POLICER_MAX_BURST, \
NSIM_DEV_TRAP_POLICER_MIN_BURST)
static const struct devlink_trap_policer nsim_trap_policers_arr[] = {
NSIM_TRAP_POLICER(1, 1000, 128),
NSIM_TRAP_POLICER(2, 2000, 256),
NSIM_TRAP_POLICER(3, 3000, 512),
};
static const struct devlink_trap_group nsim_trap_groups_arr[] = {
DEVLINK_TRAP_GROUP_GENERIC(L2_DROPS, 0),
DEVLINK_TRAP_GROUP_GENERIC(L3_DROPS, 1),
DEVLINK_TRAP_GROUP_GENERIC(L3_EXCEPTIONS, 1),
DEVLINK_TRAP_GROUP_GENERIC(BUFFER_DROPS, 2),
DEVLINK_TRAP_GROUP_GENERIC(ACL_DROPS, 3),
DEVLINK_TRAP_GROUP_GENERIC(MC_SNOOPING, 3),
};
static const struct devlink_trap nsim_traps_arr[] = {
NSIM_TRAP_DROP(SMAC_MC, L2_DROPS),
NSIM_TRAP_DROP(VLAN_TAG_MISMATCH, L2_DROPS),
NSIM_TRAP_DROP(INGRESS_VLAN_FILTER, L2_DROPS),
NSIM_TRAP_DROP(INGRESS_STP_FILTER, L2_DROPS),
NSIM_TRAP_DROP(EMPTY_TX_LIST, L2_DROPS),
NSIM_TRAP_DROP(PORT_LOOPBACK_FILTER, L2_DROPS),
NSIM_TRAP_DRIVER_EXCEPTION(FID_MISS, L2_DROPS),
NSIM_TRAP_DROP(BLACKHOLE_ROUTE, L3_DROPS),
NSIM_TRAP_EXCEPTION(TTL_ERROR, L3_EXCEPTIONS),
NSIM_TRAP_DROP(TAIL_DROP, BUFFER_DROPS),
NSIM_TRAP_DROP_EXT(INGRESS_FLOW_ACTION_DROP, ACL_DROPS,
DEVLINK_TRAP_METADATA_TYPE_F_FA_COOKIE),
NSIM_TRAP_DROP_EXT(EGRESS_FLOW_ACTION_DROP, ACL_DROPS,
DEVLINK_TRAP_METADATA_TYPE_F_FA_COOKIE),
NSIM_TRAP_CONTROL(IGMP_QUERY, MC_SNOOPING, MIRROR),
NSIM_TRAP_CONTROL(IGMP_V1_REPORT, MC_SNOOPING, TRAP),
};
#define NSIM_TRAP_L4_DATA_LEN 100
static struct sk_buff *nsim_dev_trap_skb_build(void)
{
int tot_len, data_len = NSIM_TRAP_L4_DATA_LEN;
struct sk_buff *skb;
struct udphdr *udph;
struct ethhdr *eth;
struct iphdr *iph;
skb = alloc_skb(NLMSG_GOODSIZE, GFP_ATOMIC);
if (!skb)
return NULL;
tot_len = sizeof(struct iphdr) + sizeof(struct udphdr) + data_len;
skb_reset_mac_header(skb);
eth = skb_put(skb, sizeof(struct ethhdr));
eth_random_addr(eth->h_dest);
eth_random_addr(eth->h_source);
eth->h_proto = htons(ETH_P_IP);
skb->protocol = htons(ETH_P_IP);
skb_set_network_header(skb, skb->len);
iph = skb_put(skb, sizeof(struct iphdr));
iph->protocol = IPPROTO_UDP;
iph->saddr = in_aton("192.0.2.1");
iph->daddr = in_aton("198.51.100.1");
iph->version = 0x4;
iph->frag_off = 0;
iph->ihl = 0x5;
iph->tot_len = htons(tot_len);
iph->ttl = 100;
iph->check = 0;
iph->check = ip_fast_csum((unsigned char *)iph, iph->ihl);
skb_set_transport_header(skb, skb->len);
udph = skb_put_zero(skb, sizeof(struct udphdr) + data_len);
get_random_bytes(&udph->source, sizeof(u16));
get_random_bytes(&udph->dest, sizeof(u16));
udph->len = htons(sizeof(struct udphdr) + data_len);
return skb;
}
static void nsim_dev_trap_report(struct nsim_dev_port *nsim_dev_port)
{
struct nsim_dev *nsim_dev = nsim_dev_port->ns->nsim_dev;
struct devlink *devlink = priv_to_devlink(nsim_dev);
struct nsim_trap_data *nsim_trap_data;
int i;
nsim_trap_data = nsim_dev->trap_data;
spin_lock(&nsim_trap_data->trap_lock);
for (i = 0; i < ARRAY_SIZE(nsim_traps_arr); i++) {
struct flow_action_cookie *fa_cookie = NULL;
struct nsim_trap_item *nsim_trap_item;
struct sk_buff *skb;
bool has_fa_cookie;
has_fa_cookie = nsim_traps_arr[i].metadata_cap &
DEVLINK_TRAP_METADATA_TYPE_F_FA_COOKIE;
nsim_trap_item = &nsim_trap_data->trap_items_arr[i];
if (nsim_trap_item->action == DEVLINK_TRAP_ACTION_DROP)
continue;
skb = nsim_dev_trap_skb_build();
if (!skb)
continue;
skb->dev = nsim_dev_port->ns->netdev;
/* Trapped packets are usually passed to devlink in softIRQ,
* but in this case they are generated in a workqueue. Disable
* softIRQs to prevent lockdep from complaining about
* "incosistent lock state".
*/
spin_lock_bh(&nsim_dev->fa_cookie_lock);
fa_cookie = has_fa_cookie ? nsim_dev->fa_cookie : NULL;
devlink_trap_report(devlink, skb, nsim_trap_item->trap_ctx,
&nsim_dev_port->devlink_port, fa_cookie);
spin_unlock_bh(&nsim_dev->fa_cookie_lock);
consume_skb(skb);
}
spin_unlock(&nsim_trap_data->trap_lock);
}
#define NSIM_TRAP_REPORT_INTERVAL_MS 100
static void nsim_dev_trap_report_work(struct work_struct *work)
{
struct nsim_trap_data *nsim_trap_data;
struct nsim_dev_port *nsim_dev_port;
struct nsim_dev *nsim_dev;
nsim_trap_data = container_of(work, struct nsim_trap_data,
trap_report_dw.work);
nsim_dev = nsim_trap_data->nsim_dev;
/* For each running port and enabled packet trap, generate a UDP
* packet with a random 5-tuple and report it.
*/
mutex_lock(&nsim_dev->port_list_lock);
list_for_each_entry(nsim_dev_port, &nsim_dev->port_list, list) {
if (!netif_running(nsim_dev_port->ns->netdev))
continue;
nsim_dev_trap_report(nsim_dev_port);
}
mutex_unlock(&nsim_dev->port_list_lock);
schedule_delayed_work(&nsim_dev->trap_data->trap_report_dw,
msecs_to_jiffies(NSIM_TRAP_REPORT_INTERVAL_MS));
}
static int nsim_dev_traps_init(struct devlink *devlink)
{
size_t policers_count = ARRAY_SIZE(nsim_trap_policers_arr);
struct nsim_dev *nsim_dev = devlink_priv(devlink);
struct nsim_trap_data *nsim_trap_data;
int err;
nsim_trap_data = kzalloc(sizeof(*nsim_trap_data), GFP_KERNEL);
if (!nsim_trap_data)
return -ENOMEM;
nsim_trap_data->trap_items_arr = kcalloc(ARRAY_SIZE(nsim_traps_arr),
sizeof(struct nsim_trap_item),
GFP_KERNEL);
if (!nsim_trap_data->trap_items_arr) {
err = -ENOMEM;
goto err_trap_data_free;
}
nsim_trap_data->trap_policers_cnt_arr = kcalloc(policers_count,
sizeof(u64),
GFP_KERNEL);
if (!nsim_trap_data->trap_policers_cnt_arr) {
err = -ENOMEM;
goto err_trap_items_free;
}
/* The lock is used to protect the action state of the registered
* traps. The value is written by user and read in delayed work when
* iterating over all the traps.
*/
spin_lock_init(&nsim_trap_data->trap_lock);
nsim_trap_data->nsim_dev = nsim_dev;
nsim_dev->trap_data = nsim_trap_data;
err = devlink_trap_policers_register(devlink, nsim_trap_policers_arr,
policers_count);
if (err)
goto err_trap_policers_cnt_free;
err = devlink_trap_groups_register(devlink, nsim_trap_groups_arr,
ARRAY_SIZE(nsim_trap_groups_arr));
if (err)
goto err_trap_policers_unregister;
err = devlink_traps_register(devlink, nsim_traps_arr,
ARRAY_SIZE(nsim_traps_arr), NULL);
if (err)
goto err_trap_groups_unregister;
INIT_DELAYED_WORK(&nsim_dev->trap_data->trap_report_dw,
nsim_dev_trap_report_work);
schedule_delayed_work(&nsim_dev->trap_data->trap_report_dw,
msecs_to_jiffies(NSIM_TRAP_REPORT_INTERVAL_MS));
return 0;
err_trap_groups_unregister:
devlink_trap_groups_unregister(devlink, nsim_trap_groups_arr,
ARRAY_SIZE(nsim_trap_groups_arr));
err_trap_policers_unregister:
devlink_trap_policers_unregister(devlink, nsim_trap_policers_arr,
ARRAY_SIZE(nsim_trap_policers_arr));
err_trap_policers_cnt_free:
kfree(nsim_trap_data->trap_policers_cnt_arr);
err_trap_items_free:
kfree(nsim_trap_data->trap_items_arr);
err_trap_data_free:
kfree(nsim_trap_data);
return err;
}
static void nsim_dev_traps_exit(struct devlink *devlink)
{
struct nsim_dev *nsim_dev = devlink_priv(devlink);
cancel_delayed_work_sync(&nsim_dev->trap_data->trap_report_dw);
devlink_traps_unregister(devlink, nsim_traps_arr,
ARRAY_SIZE(nsim_traps_arr));
devlink_trap_groups_unregister(devlink, nsim_trap_groups_arr,
ARRAY_SIZE(nsim_trap_groups_arr));
devlink_trap_policers_unregister(devlink, nsim_trap_policers_arr,
ARRAY_SIZE(nsim_trap_policers_arr));
kfree(nsim_dev->trap_data->trap_policers_cnt_arr);
kfree(nsim_dev->trap_data->trap_items_arr);
kfree(nsim_dev->trap_data);
}
static int nsim_dev_reload_create(struct nsim_dev *nsim_dev,
struct netlink_ext_ack *extack);
static void nsim_dev_reload_destroy(struct nsim_dev *nsim_dev);
static int nsim_dev_reload_down(struct devlink *devlink, bool netns_change,
enum devlink_reload_action action, enum devlink_reload_limit limit,
struct netlink_ext_ack *extack)
{
struct nsim_dev *nsim_dev = devlink_priv(devlink);
struct nsim_bus_dev *nsim_bus_dev;
nsim_bus_dev = nsim_dev->nsim_bus_dev;
if (!mutex_trylock(&nsim_bus_dev->nsim_bus_reload_lock))
return -EOPNOTSUPP;
if (nsim_dev->dont_allow_reload) {
/* For testing purposes, user set debugfs dont_allow_reload
* value to true. So forbid it.
*/
NL_SET_ERR_MSG_MOD(extack, "User forbid the reload for testing purposes");
mutex_unlock(&nsim_bus_dev->nsim_bus_reload_lock);
return -EOPNOTSUPP;
}
nsim_bus_dev->in_reload = true;
nsim_dev_reload_destroy(nsim_dev);
mutex_unlock(&nsim_bus_dev->nsim_bus_reload_lock);
return 0;
}
static int nsim_dev_reload_up(struct devlink *devlink, enum devlink_reload_action action,
enum devlink_reload_limit limit, u32 *actions_performed,
struct netlink_ext_ack *extack)
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
{
struct nsim_dev *nsim_dev = devlink_priv(devlink);
struct nsim_bus_dev *nsim_bus_dev;
int ret;
nsim_bus_dev = nsim_dev->nsim_bus_dev;
mutex_lock(&nsim_bus_dev->nsim_bus_reload_lock);
nsim_bus_dev->in_reload = false;
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
if (nsim_dev->fail_reload) {
/* For testing purposes, user set debugfs fail_reload
* value to true. Fail right away.
*/
NL_SET_ERR_MSG_MOD(extack, "User setup the reload to fail for testing purposes");
mutex_unlock(&nsim_bus_dev->nsim_bus_reload_lock);
return -EINVAL;
}
*actions_performed = BIT(DEVLINK_RELOAD_ACTION_DRIVER_REINIT);
ret = nsim_dev_reload_create(nsim_dev, extack);
mutex_unlock(&nsim_bus_dev->nsim_bus_reload_lock);
return ret;
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
}
static int nsim_dev_info_get(struct devlink *devlink,
struct devlink_info_req *req,
struct netlink_ext_ack *extack)
{
return devlink_info_driver_name_put(req, DRV_NAME);
}
#define NSIM_DEV_FLASH_SIZE 500000
#define NSIM_DEV_FLASH_CHUNK_SIZE 1000
#define NSIM_DEV_FLASH_CHUNK_TIME_MS 10
static int nsim_dev_flash_update(struct devlink *devlink,
struct devlink_flash_update_params *params,
struct netlink_ext_ack *extack)
{
struct nsim_dev *nsim_dev = devlink_priv(devlink);
int i;
if ((params->overwrite_mask & ~nsim_dev->fw_update_overwrite_mask) != 0)
return -EOPNOTSUPP;
if (nsim_dev->fw_update_status) {
devlink_flash_update_status_notify(devlink,
"Preparing to flash",
params->component, 0, 0);
}
for (i = 0; i < NSIM_DEV_FLASH_SIZE / NSIM_DEV_FLASH_CHUNK_SIZE; i++) {
if (nsim_dev->fw_update_status)
devlink_flash_update_status_notify(devlink, "Flashing",
params->component,
i * NSIM_DEV_FLASH_CHUNK_SIZE,
NSIM_DEV_FLASH_SIZE);
msleep(NSIM_DEV_FLASH_CHUNK_TIME_MS);
}
if (nsim_dev->fw_update_status) {
devlink_flash_update_status_notify(devlink, "Flashing",
params->component,
NSIM_DEV_FLASH_SIZE,
NSIM_DEV_FLASH_SIZE);
devlink_flash_update_timeout_notify(devlink, "Flash select",
params->component, 81);
devlink_flash_update_status_notify(devlink, "Flashing done",
params->component, 0, 0);
}
return 0;
}
static struct nsim_trap_item *
nsim_dev_trap_item_lookup(struct nsim_dev *nsim_dev, u16 trap_id)
{
struct nsim_trap_data *nsim_trap_data = nsim_dev->trap_data;
int i;
for (i = 0; i < ARRAY_SIZE(nsim_traps_arr); i++) {
if (nsim_traps_arr[i].id == trap_id)
return &nsim_trap_data->trap_items_arr[i];
}
return NULL;
}
static int nsim_dev_devlink_trap_init(struct devlink *devlink,
const struct devlink_trap *trap,
void *trap_ctx)
{
struct nsim_dev *nsim_dev = devlink_priv(devlink);
struct nsim_trap_item *nsim_trap_item;
nsim_trap_item = nsim_dev_trap_item_lookup(nsim_dev, trap->id);
if (WARN_ON(!nsim_trap_item))
return -ENOENT;
nsim_trap_item->trap_ctx = trap_ctx;
nsim_trap_item->action = trap->init_action;
return 0;
}
static int
nsim_dev_devlink_trap_action_set(struct devlink *devlink,
const struct devlink_trap *trap,
enum devlink_trap_action action,
struct netlink_ext_ack *extack)
{
struct nsim_dev *nsim_dev = devlink_priv(devlink);
struct nsim_trap_item *nsim_trap_item;
nsim_trap_item = nsim_dev_trap_item_lookup(nsim_dev, trap->id);
if (WARN_ON(!nsim_trap_item))
return -ENOENT;
spin_lock(&nsim_dev->trap_data->trap_lock);
nsim_trap_item->action = action;
spin_unlock(&nsim_dev->trap_data->trap_lock);
return 0;
}
static int
nsim_dev_devlink_trap_group_set(struct devlink *devlink,
const struct devlink_trap_group *group,
const struct devlink_trap_policer *policer,
struct netlink_ext_ack *extack)
{
struct nsim_dev *nsim_dev = devlink_priv(devlink);
if (nsim_dev->fail_trap_group_set)
return -EINVAL;
return 0;
}
static int
nsim_dev_devlink_trap_policer_set(struct devlink *devlink,
const struct devlink_trap_policer *policer,
u64 rate, u64 burst,
struct netlink_ext_ack *extack)
{
struct nsim_dev *nsim_dev = devlink_priv(devlink);
if (nsim_dev->fail_trap_policer_set) {
NL_SET_ERR_MSG_MOD(extack, "User setup the operation to fail for testing purposes");
return -EINVAL;
}
return 0;
}
static int
nsim_dev_devlink_trap_policer_counter_get(struct devlink *devlink,
const struct devlink_trap_policer *policer,
u64 *p_drops)
{
struct nsim_dev *nsim_dev = devlink_priv(devlink);
u64 *cnt;
if (nsim_dev->fail_trap_policer_counter_get)
return -EINVAL;
cnt = &nsim_dev->trap_data->trap_policers_cnt_arr[policer->id - 1];
*p_drops = (*cnt)++;
return 0;
}
#define NSIM_LINK_SPEED_MAX 5000 /* Mbps */
#define NSIM_LINK_SPEED_UNIT 125000 /* 1 Mbps given in bytes/sec to avoid
* u64 overflow during conversion from
* bytes to bits.
*/
static int nsim_rate_bytes_to_units(char *name, u64 *rate, struct netlink_ext_ack *extack)
{
u64 val;
u32 rem;
val = div_u64_rem(*rate, NSIM_LINK_SPEED_UNIT, &rem);
if (rem) {
pr_err("%s rate value %lluBps not in link speed units of 1Mbps.\n",
name, *rate);
NL_SET_ERR_MSG_MOD(extack, "TX rate value not in link speed units of 1Mbps.");
return -EINVAL;
}
if (val > NSIM_LINK_SPEED_MAX) {
pr_err("%s rate value %lluMbps exceed link maximum speed 5000Mbps.\n",
name, val);
NL_SET_ERR_MSG_MOD(extack, "TX rate value exceed link maximum speed 5000Mbps.");
return -EINVAL;
}
*rate = val;
return 0;
}
static int nsim_leaf_tx_share_set(struct devlink_rate *devlink_rate, void *priv,
u64 tx_share, struct netlink_ext_ack *extack)
{
struct nsim_dev_port *nsim_dev_port = priv;
struct nsim_bus_dev *nsim_bus_dev = nsim_dev_port->ns->nsim_bus_dev;
int vf_id = nsim_dev_port_index_to_vf_index(nsim_dev_port->port_index);
int err;
err = nsim_rate_bytes_to_units("tx_share", &tx_share, extack);
if (err)
return err;
nsim_bus_dev->vfconfigs[vf_id].min_tx_rate = tx_share;
return 0;
}
static int nsim_leaf_tx_max_set(struct devlink_rate *devlink_rate, void *priv,
u64 tx_max, struct netlink_ext_ack *extack)
{
struct nsim_dev_port *nsim_dev_port = priv;
struct nsim_bus_dev *nsim_bus_dev = nsim_dev_port->ns->nsim_bus_dev;
int vf_id = nsim_dev_port_index_to_vf_index(nsim_dev_port->port_index);
int err;
err = nsim_rate_bytes_to_units("tx_max", &tx_max, extack);
if (err)
return err;
nsim_bus_dev->vfconfigs[vf_id].max_tx_rate = tx_max;
return 0;
}
struct nsim_rate_node {
struct dentry *ddir;
struct dentry *rate_parent;
char *parent_name;
u16 tx_share;
u16 tx_max;
};
static int nsim_node_tx_share_set(struct devlink_rate *devlink_rate, void *priv,
u64 tx_share, struct netlink_ext_ack *extack)
{
struct nsim_rate_node *nsim_node = priv;
int err;
err = nsim_rate_bytes_to_units("tx_share", &tx_share, extack);
if (err)
return err;
nsim_node->tx_share = tx_share;
return 0;
}
static int nsim_node_tx_max_set(struct devlink_rate *devlink_rate, void *priv,
u64 tx_max, struct netlink_ext_ack *extack)
{
struct nsim_rate_node *nsim_node = priv;
int err;
err = nsim_rate_bytes_to_units("tx_max", &tx_max, extack);
if (err)
return err;
nsim_node->tx_max = tx_max;
return 0;
}
static int nsim_rate_node_new(struct devlink_rate *node, void **priv,
struct netlink_ext_ack *extack)
{
struct nsim_dev *nsim_dev = devlink_priv(node->devlink);
struct nsim_rate_node *nsim_node;
if (!nsim_esw_mode_is_switchdev(nsim_dev)) {
NL_SET_ERR_MSG_MOD(extack, "Node creation allowed only in switchdev mode.");
return -EOPNOTSUPP;
}
nsim_node = kzalloc(sizeof(*nsim_node), GFP_KERNEL);
if (!nsim_node)
return -ENOMEM;
nsim_node->ddir = debugfs_create_dir(node->name, nsim_dev->nodes_ddir);
debugfs_create_u16("tx_share", 0400, nsim_node->ddir, &nsim_node->tx_share);
debugfs_create_u16("tx_max", 0400, nsim_node->ddir, &nsim_node->tx_max);
nsim_node->rate_parent = debugfs_create_file("rate_parent", 0400,
nsim_node->ddir,
&nsim_node->parent_name,
&nsim_dev_rate_parent_fops);
*priv = nsim_node;
return 0;
}
static int nsim_rate_node_del(struct devlink_rate *node, void *priv,
struct netlink_ext_ack *extack)
{
struct nsim_rate_node *nsim_node = priv;
debugfs_remove(nsim_node->rate_parent);
debugfs_remove_recursive(nsim_node->ddir);
kfree(nsim_node);
return 0;
}
static int nsim_rate_leaf_parent_set(struct devlink_rate *child,
struct devlink_rate *parent,
void *priv_child, void *priv_parent,
struct netlink_ext_ack *extack)
{
struct nsim_dev_port *nsim_dev_port = priv_child;
if (parent)
nsim_dev_port->parent_name = parent->name;
else
nsim_dev_port->parent_name = NULL;
return 0;
}
static int nsim_rate_node_parent_set(struct devlink_rate *child,
struct devlink_rate *parent,
void *priv_child, void *priv_parent,
struct netlink_ext_ack *extack)
{
struct nsim_rate_node *nsim_node = priv_child;
if (parent)
nsim_node->parent_name = parent->name;
else
nsim_node->parent_name = NULL;
return 0;
}
static int
nsim_dev_devlink_trap_drop_counter_get(struct devlink *devlink,
const struct devlink_trap *trap,
u64 *p_drops)
{
struct nsim_dev *nsim_dev = devlink_priv(devlink);
u64 *cnt;
if (nsim_dev->fail_trap_drop_counter_get)
return -EINVAL;
cnt = &nsim_dev->trap_data->trap_pkt_cnt;
*p_drops = (*cnt)++;
return 0;
}
static const struct devlink_ops nsim_dev_devlink_ops = {
.eswitch_mode_set = nsim_devlink_eswitch_mode_set,
.eswitch_mode_get = nsim_devlink_eswitch_mode_get,
.supported_flash_update_params = DEVLINK_SUPPORT_FLASH_UPDATE_COMPONENT |
DEVLINK_SUPPORT_FLASH_UPDATE_OVERWRITE_MASK,
.reload_actions = BIT(DEVLINK_RELOAD_ACTION_DRIVER_REINIT),
.reload_down = nsim_dev_reload_down,
.reload_up = nsim_dev_reload_up,
.info_get = nsim_dev_info_get,
.flash_update = nsim_dev_flash_update,
.trap_init = nsim_dev_devlink_trap_init,
.trap_action_set = nsim_dev_devlink_trap_action_set,
.trap_group_set = nsim_dev_devlink_trap_group_set,
.trap_policer_set = nsim_dev_devlink_trap_policer_set,
.trap_policer_counter_get = nsim_dev_devlink_trap_policer_counter_get,
.rate_leaf_tx_share_set = nsim_leaf_tx_share_set,
.rate_leaf_tx_max_set = nsim_leaf_tx_max_set,
.rate_node_tx_share_set = nsim_node_tx_share_set,
.rate_node_tx_max_set = nsim_node_tx_max_set,
.rate_node_new = nsim_rate_node_new,
.rate_node_del = nsim_rate_node_del,
.rate_leaf_parent_set = nsim_rate_leaf_parent_set,
.rate_node_parent_set = nsim_rate_node_parent_set,
.trap_drop_counter_get = nsim_dev_devlink_trap_drop_counter_get,
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
};
#define NSIM_DEV_MAX_MACS_DEFAULT 32
#define NSIM_DEV_TEST1_DEFAULT true
static int __nsim_dev_port_add(struct nsim_dev *nsim_dev, enum nsim_dev_port_type type,
unsigned int port_index)
{
struct nsim_bus_dev *nsim_bus_dev = nsim_dev->nsim_bus_dev;
struct devlink_port_attrs attrs = {};
struct nsim_dev_port *nsim_dev_port;
struct devlink_port *devlink_port;
int err;
if (type == NSIM_DEV_PORT_TYPE_VF && !nsim_bus_dev->num_vfs)
return -EINVAL;
nsim_dev_port = kzalloc(sizeof(*nsim_dev_port), GFP_KERNEL);
if (!nsim_dev_port)
return -ENOMEM;
nsim_dev_port->port_index = nsim_dev_port_index(type, port_index);
nsim_dev_port->port_type = type;
devlink_port = &nsim_dev_port->devlink_port;
if (nsim_dev_port_is_pf(nsim_dev_port)) {
attrs.flavour = DEVLINK_PORT_FLAVOUR_PHYSICAL;
attrs.phys.port_number = port_index + 1;
} else {
attrs.flavour = DEVLINK_PORT_FLAVOUR_PCI_VF;
attrs.pci_vf.pf = 0;
attrs.pci_vf.vf = port_index;
}
memcpy(attrs.switch_id.id, nsim_dev->switch_id.id, nsim_dev->switch_id.id_len);
attrs.switch_id.id_len = nsim_dev->switch_id.id_len;
devlink_port_attrs_set(devlink_port, &attrs);
err = devlink_port_register(priv_to_devlink(nsim_dev), devlink_port,
nsim_dev_port->port_index);
if (err)
goto err_port_free;
err = nsim_dev_port_debugfs_init(nsim_dev, nsim_dev_port);
if (err)
goto err_dl_port_unregister;
nsim_dev_port->ns = nsim_create(nsim_dev, nsim_dev_port);
if (IS_ERR(nsim_dev_port->ns)) {
err = PTR_ERR(nsim_dev_port->ns);
goto err_port_debugfs_exit;
}
if (nsim_dev_port_is_vf(nsim_dev_port)) {
err = devlink_rate_leaf_create(&nsim_dev_port->devlink_port,
nsim_dev_port);
if (err)
goto err_nsim_destroy;
}
devlink_port_type_eth_set(devlink_port, nsim_dev_port->ns->netdev);
list_add(&nsim_dev_port->list, &nsim_dev->port_list);
return 0;
err_nsim_destroy:
nsim_destroy(nsim_dev_port->ns);
err_port_debugfs_exit:
nsim_dev_port_debugfs_exit(nsim_dev_port);
err_dl_port_unregister:
devlink_port_unregister(devlink_port);
err_port_free:
kfree(nsim_dev_port);
return err;
}
static void __nsim_dev_port_del(struct nsim_dev_port *nsim_dev_port)
{
struct devlink_port *devlink_port = &nsim_dev_port->devlink_port;
list_del(&nsim_dev_port->list);
if (nsim_dev_port_is_vf(nsim_dev_port))
devlink_rate_leaf_destroy(&nsim_dev_port->devlink_port);
devlink_port_type_clear(devlink_port);
nsim_destroy(nsim_dev_port->ns);
nsim_dev_port_debugfs_exit(nsim_dev_port);
devlink_port_unregister(devlink_port);
kfree(nsim_dev_port);
}
static void nsim_dev_port_del_all(struct nsim_dev *nsim_dev)
{
struct nsim_dev_port *nsim_dev_port, *tmp;
mutex_lock(&nsim_dev->port_list_lock);
list_for_each_entry_safe(nsim_dev_port, tmp,
&nsim_dev->port_list, list)
__nsim_dev_port_del(nsim_dev_port);
mutex_unlock(&nsim_dev->port_list_lock);
}
static int nsim_dev_port_add_all(struct nsim_dev *nsim_dev,
unsigned int port_count)
{
int i, err;
for (i = 0; i < port_count; i++) {
err = __nsim_dev_port_add(nsim_dev, NSIM_DEV_PORT_TYPE_PF, i);
if (err)
goto err_port_del_all;
}
return 0;
err_port_del_all:
nsim_dev_port_del_all(nsim_dev);
return err;
}
static int nsim_dev_reload_create(struct nsim_dev *nsim_dev,
struct netlink_ext_ack *extack)
{
struct nsim_bus_dev *nsim_bus_dev = nsim_dev->nsim_bus_dev;
struct devlink *devlink;
int err;
devlink = priv_to_devlink(nsim_dev);
nsim_dev = devlink_priv(devlink);
INIT_LIST_HEAD(&nsim_dev->port_list);
mutex_init(&nsim_dev->port_list_lock);
nsim_dev->fw_update_status = true;
nsim_dev->fw_update_overwrite_mask = 0;
nsim_devlink_param_load_driverinit_values(devlink);
err = nsim_dev_dummy_region_init(nsim_dev, devlink);
if (err)
return err;
err = nsim_dev_traps_init(devlink);
if (err)
goto err_dummy_region_exit;
nsim_dev->fib_data = nsim_fib_create(devlink, extack);
if (IS_ERR(nsim_dev->fib_data)) {
err = PTR_ERR(nsim_dev->fib_data);
goto err_traps_exit;
}
err = nsim_dev_health_init(nsim_dev, devlink);
if (err)
goto err_fib_destroy;
err = nsim_dev_psample_init(nsim_dev);
if (err)
goto err_health_exit;
err = nsim_dev_port_add_all(nsim_dev, nsim_bus_dev->port_count);
if (err)
goto err_psample_exit;
netdevsim: fix panic in nsim_dev_take_snapshot_write() nsim_dev_take_snapshot_write() uses nsim_dev and nsim_dev->dummy_region. So, during this function, these data shouldn't be removed. But there is no protecting stuff in this function. There are two similar cases. 1. reload case reload could be called during nsim_dev_take_snapshot_write(). When reload is being executed, nsim_dev_reload_down() is called and it calls nsim_dev_reload_destroy(). nsim_dev_reload_destroy() calls devlink_region_destroy() to destroy nsim_dev->dummy_region. So, during nsim_dev_take_snapshot_write(), nsim_dev->dummy_region() would be removed. At this point, snapshot_write() would access freed pointer. In order to fix this case, take_snapshot file will be removed before devlink_region_destroy(). The take_snapshot file will be re-created by ->reload_up(). 2. del_device_store case del_device_store() also could call nsim_dev_reload_destroy() during nsim_dev_take_snapshot_write(). If so, panic would occur. This problem is actually the same problem with the first case. So, this problem will be fixed by the first case's solution. Test commands: modprobe netdevsim while : do echo 1 > /sys/bus/netdevsim/new_device & echo 1 > /sys/bus/netdevsim/del_device & devlink dev reload netdevsim/netdevsim1 & echo 1 > /sys/kernel/debug/netdevsim/netdevsim1/take_snapshot & done Splat looks like: [ 45.564513][ T975] general protection fault, probably for non-canonical address 0xdffffc000000003a: 0000 [#1] SMP DEI [ 45.566131][ T975] KASAN: null-ptr-deref in range [0x00000000000001d0-0x00000000000001d7] [ 45.566135][ T975] CPU: 1 PID: 975 Comm: bash Not tainted 5.5.0+ #322 [ 45.569020][ T975] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 45.569026][ T975] RIP: 0010:__mutex_lock+0x10a/0x14b0 [ 45.570518][ T975] Code: 08 84 d2 0f 85 7f 12 00 00 44 8b 0d 10 23 65 02 45 85 c9 75 29 49 8d 7f 68 48 b8 00 00 00 0f [ 45.570522][ T975] RSP: 0018:ffff888046ccfbf0 EFLAGS: 00010206 [ 45.572305][ T975] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 45.572308][ T975] RDX: 000000000000003a RSI: ffffffffac926440 RDI: 00000000000001d0 [ 45.576843][ T975] RBP: ffff888046ccfd70 R08: ffffffffab610645 R09: 0000000000000000 [ 45.576847][ T975] R10: ffff888046ccfd90 R11: ffffed100d6360ad R12: 0000000000000000 [ 45.578471][ T975] R13: dffffc0000000000 R14: ffffffffae1976c0 R15: 0000000000000168 [ 45.578475][ T975] FS: 00007f614d6e7740(0000) GS:ffff88806c400000(0000) knlGS:0000000000000000 [ 45.581492][ T975] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 45.582942][ T975] CR2: 00005618677d1cf0 CR3: 000000005fb9c002 CR4: 00000000000606e0 [ 45.584543][ T975] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 45.586633][ T975] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 45.589889][ T975] Call Trace: [ 45.591445][ T975] ? devlink_region_snapshot_create+0x55/0x4a0 [ 45.601250][ T975] ? mutex_lock_io_nested+0x1380/0x1380 [ 45.602817][ T975] ? mutex_lock_io_nested+0x1380/0x1380 [ 45.603875][ T975] ? mark_held_locks+0xa5/0xe0 [ 45.604769][ T975] ? _raw_spin_unlock_irqrestore+0x2d/0x50 [ 45.606147][ T975] ? __mutex_unlock_slowpath+0xd0/0x670 [ 45.607723][ T975] ? crng_backtrack_protect+0x80/0x80 [ 45.613530][ T975] ? wait_for_completion+0x390/0x390 [ 45.615152][ T975] ? devlink_region_snapshot_create+0x55/0x4a0 [ 45.616834][ T975] devlink_region_snapshot_create+0x55/0x4a0 [ ... ] Fixes: 4418f862d675 ("netdevsim: implement support for devlink region and snapshots") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-02 00:43:13 +08:00
nsim_dev->take_snapshot = debugfs_create_file("take_snapshot",
0200,
nsim_dev->ddir,
nsim_dev,
&nsim_dev_take_snapshot_fops);
return 0;
err_psample_exit:
nsim_dev_psample_exit(nsim_dev);
err_health_exit:
nsim_dev_health_exit(nsim_dev);
err_fib_destroy:
nsim_fib_destroy(devlink, nsim_dev->fib_data);
err_traps_exit:
nsim_dev_traps_exit(devlink);
err_dummy_region_exit:
nsim_dev_dummy_region_exit(nsim_dev);
return err;
}
int nsim_dev_probe(struct nsim_bus_dev *nsim_bus_dev)
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
{
struct nsim_dev *nsim_dev;
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
struct devlink *devlink;
int err;
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
devlink = devlink_alloc_ns(&nsim_dev_devlink_ops, sizeof(*nsim_dev),
nsim_bus_dev->initial_net, &nsim_bus_dev->dev);
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
if (!devlink)
return -ENOMEM;
nsim_dev = devlink_priv(devlink);
nsim_dev->nsim_bus_dev = nsim_bus_dev;
nsim_dev->switch_id.id_len = sizeof(nsim_dev->switch_id.id);
get_random_bytes(nsim_dev->switch_id.id, nsim_dev->switch_id.id_len);
INIT_LIST_HEAD(&nsim_dev->port_list);
mutex_init(&nsim_dev->port_list_lock);
nsim_dev->fw_update_status = true;
nsim_dev->fw_update_overwrite_mask = 0;
nsim_dev->max_macs = NSIM_DEV_MAX_MACS_DEFAULT;
nsim_dev->test1 = NSIM_DEV_TEST1_DEFAULT;
spin_lock_init(&nsim_dev->fa_cookie_lock);
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
dev_set_drvdata(&nsim_bus_dev->dev, nsim_dev);
err = nsim_dev_resources_register(devlink);
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
if (err)
goto err_devlink_free;
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
err = devlink_register(devlink);
if (err)
goto err_resources_unregister;
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
err = devlink_params_register(devlink, nsim_devlink_params,
ARRAY_SIZE(nsim_devlink_params));
if (err)
goto err_dl_unregister;
nsim_devlink_set_params_init_values(nsim_dev, devlink);
err = nsim_dev_dummy_region_init(nsim_dev, devlink);
if (err)
goto err_params_unregister;
err = nsim_dev_traps_init(devlink);
if (err)
goto err_dummy_region_exit;
err = nsim_dev_debugfs_init(nsim_dev);
if (err)
goto err_traps_exit;
nsim_dev->fib_data = nsim_fib_create(devlink, NULL);
if (IS_ERR(nsim_dev->fib_data)) {
err = PTR_ERR(nsim_dev->fib_data);
goto err_debugfs_exit;
}
err = nsim_dev_health_init(nsim_dev, devlink);
if (err)
goto err_fib_destroy;
err = nsim_bpf_dev_init(nsim_dev);
if (err)
goto err_health_exit;
err = nsim_dev_psample_init(nsim_dev);
if (err)
goto err_bpf_dev_exit;
err = nsim_dev_port_add_all(nsim_dev, nsim_bus_dev->port_count);
if (err)
goto err_psample_exit;
devlink_params_publish(devlink);
devlink_reload_enable(devlink);
nsim_dev->esw_mode = DEVLINK_ESWITCH_MODE_LEGACY;
return 0;
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
err_psample_exit:
nsim_dev_psample_exit(nsim_dev);
err_bpf_dev_exit:
nsim_bpf_dev_exit(nsim_dev);
err_health_exit:
nsim_dev_health_exit(nsim_dev);
err_fib_destroy:
nsim_fib_destroy(devlink, nsim_dev->fib_data);
err_debugfs_exit:
nsim_dev_debugfs_exit(nsim_dev);
err_traps_exit:
nsim_dev_traps_exit(devlink);
err_dummy_region_exit:
nsim_dev_dummy_region_exit(nsim_dev);
err_params_unregister:
devlink_params_unregister(devlink, nsim_devlink_params,
ARRAY_SIZE(nsim_devlink_params));
err_dl_unregister:
devlink_unregister(devlink);
err_resources_unregister:
devlink_resources_unregister(devlink, NULL);
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
err_devlink_free:
devlink_free(devlink);
return err;
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
}
static void nsim_dev_reload_destroy(struct nsim_dev *nsim_dev)
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
{
struct devlink *devlink = priv_to_devlink(nsim_dev);
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
if (devlink_is_reload_failed(devlink))
return;
netdevsim: fix panic in nsim_dev_take_snapshot_write() nsim_dev_take_snapshot_write() uses nsim_dev and nsim_dev->dummy_region. So, during this function, these data shouldn't be removed. But there is no protecting stuff in this function. There are two similar cases. 1. reload case reload could be called during nsim_dev_take_snapshot_write(). When reload is being executed, nsim_dev_reload_down() is called and it calls nsim_dev_reload_destroy(). nsim_dev_reload_destroy() calls devlink_region_destroy() to destroy nsim_dev->dummy_region. So, during nsim_dev_take_snapshot_write(), nsim_dev->dummy_region() would be removed. At this point, snapshot_write() would access freed pointer. In order to fix this case, take_snapshot file will be removed before devlink_region_destroy(). The take_snapshot file will be re-created by ->reload_up(). 2. del_device_store case del_device_store() also could call nsim_dev_reload_destroy() during nsim_dev_take_snapshot_write(). If so, panic would occur. This problem is actually the same problem with the first case. So, this problem will be fixed by the first case's solution. Test commands: modprobe netdevsim while : do echo 1 > /sys/bus/netdevsim/new_device & echo 1 > /sys/bus/netdevsim/del_device & devlink dev reload netdevsim/netdevsim1 & echo 1 > /sys/kernel/debug/netdevsim/netdevsim1/take_snapshot & done Splat looks like: [ 45.564513][ T975] general protection fault, probably for non-canonical address 0xdffffc000000003a: 0000 [#1] SMP DEI [ 45.566131][ T975] KASAN: null-ptr-deref in range [0x00000000000001d0-0x00000000000001d7] [ 45.566135][ T975] CPU: 1 PID: 975 Comm: bash Not tainted 5.5.0+ #322 [ 45.569020][ T975] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 45.569026][ T975] RIP: 0010:__mutex_lock+0x10a/0x14b0 [ 45.570518][ T975] Code: 08 84 d2 0f 85 7f 12 00 00 44 8b 0d 10 23 65 02 45 85 c9 75 29 49 8d 7f 68 48 b8 00 00 00 0f [ 45.570522][ T975] RSP: 0018:ffff888046ccfbf0 EFLAGS: 00010206 [ 45.572305][ T975] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 45.572308][ T975] RDX: 000000000000003a RSI: ffffffffac926440 RDI: 00000000000001d0 [ 45.576843][ T975] RBP: ffff888046ccfd70 R08: ffffffffab610645 R09: 0000000000000000 [ 45.576847][ T975] R10: ffff888046ccfd90 R11: ffffed100d6360ad R12: 0000000000000000 [ 45.578471][ T975] R13: dffffc0000000000 R14: ffffffffae1976c0 R15: 0000000000000168 [ 45.578475][ T975] FS: 00007f614d6e7740(0000) GS:ffff88806c400000(0000) knlGS:0000000000000000 [ 45.581492][ T975] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 45.582942][ T975] CR2: 00005618677d1cf0 CR3: 000000005fb9c002 CR4: 00000000000606e0 [ 45.584543][ T975] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 45.586633][ T975] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 45.589889][ T975] Call Trace: [ 45.591445][ T975] ? devlink_region_snapshot_create+0x55/0x4a0 [ 45.601250][ T975] ? mutex_lock_io_nested+0x1380/0x1380 [ 45.602817][ T975] ? mutex_lock_io_nested+0x1380/0x1380 [ 45.603875][ T975] ? mark_held_locks+0xa5/0xe0 [ 45.604769][ T975] ? _raw_spin_unlock_irqrestore+0x2d/0x50 [ 45.606147][ T975] ? __mutex_unlock_slowpath+0xd0/0x670 [ 45.607723][ T975] ? crng_backtrack_protect+0x80/0x80 [ 45.613530][ T975] ? wait_for_completion+0x390/0x390 [ 45.615152][ T975] ? devlink_region_snapshot_create+0x55/0x4a0 [ 45.616834][ T975] devlink_region_snapshot_create+0x55/0x4a0 [ ... ] Fixes: 4418f862d675 ("netdevsim: implement support for devlink region and snapshots") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-02-02 00:43:13 +08:00
debugfs_remove(nsim_dev->take_snapshot);
mutex_lock(&nsim_dev->nsim_bus_dev->vfs_lock);
if (nsim_dev->nsim_bus_dev->num_vfs)
nsim_bus_dev_vfs_disable(nsim_dev->nsim_bus_dev);
mutex_unlock(&nsim_dev->nsim_bus_dev->vfs_lock);
nsim_dev_port_del_all(nsim_dev);
nsim_dev_psample_exit(nsim_dev);
nsim_dev_health_exit(nsim_dev);
nsim_fib_destroy(devlink, nsim_dev->fib_data);
nsim_dev_traps_exit(devlink);
nsim_dev_dummy_region_exit(nsim_dev);
mutex_destroy(&nsim_dev->port_list_lock);
}
void nsim_dev_remove(struct nsim_bus_dev *nsim_bus_dev)
{
struct nsim_dev *nsim_dev = dev_get_drvdata(&nsim_bus_dev->dev);
struct devlink *devlink = priv_to_devlink(nsim_dev);
devlink_reload_disable(devlink);
nsim_dev_reload_destroy(nsim_dev);
nsim_bpf_dev_exit(nsim_dev);
nsim_dev_debugfs_exit(nsim_dev);
devlink_params_unregister(devlink, nsim_devlink_params,
ARRAY_SIZE(nsim_devlink_params));
devlink_unregister(devlink);
devlink_resources_unregister(devlink, NULL);
devlink_free(devlink);
netdevsim: Add simple FIB resource controller via devlink Add devlink support to netdevsim and use it to implement a simple, profile based resource controller. Only one controller is needed per namespace, so the first netdevsim netdevice in a namespace registers with devlink. If that device is deleted, the resource settings are deleted. The resource controller allows a user to limit the number of IPv4 and IPv6 FIB entries and FIB rules. The resource paths are: /IPv4 /IPv4/fib /IPv4/fib-rules /IPv6 /IPv6/fib /IPv6/fib-rules The IPv4 and IPv6 top level resources are unlimited in size and can not be changed. From there, the number of FIB entries and FIB rule entries are unlimited by default. A user can specify a limit for the fib and fib-rules resources: $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib size 96 $ devlink resource set netdevsim/netdevsim0 path /IPv4/fib-rules size 16 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib size 64 $ devlink resource set netdevsim/netdevsim0 path /IPv6/fib-rules size 16 $ devlink dev reload netdevsim/netdevsim0 such that the number of rules or routes is limited (96 ipv4 routes in the example above): $ for n in $(seq 1 32); do ip ro add 10.99.$n.0/24 dev eth1; done Error: netdevsim: Exceeded number of supported fib entries. $ devlink resource show netdevsim/netdevsim0 netdevsim/netdevsim0: name IPv4 size unlimited unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables non resources: name fib size 96 occ 96 unit entry size_min 0 size_max unlimited size_gran 1 dpipe_tables ... With this template in place for resource management, it is fairly trivial to extend and shows one way to implement a simple counter based resource controller typical of network profiles. Currently, devlink only supports initial namespace. Code is in place to adapt netdevsim to a per namespace controller once the network namespace issues are resolved. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-28 09:22:00 +08:00
}
static struct nsim_dev_port *
__nsim_dev_port_lookup(struct nsim_dev *nsim_dev, enum nsim_dev_port_type type,
unsigned int port_index)
{
struct nsim_dev_port *nsim_dev_port;
port_index = nsim_dev_port_index(type, port_index);
list_for_each_entry(nsim_dev_port, &nsim_dev->port_list, list)
if (nsim_dev_port->port_index == port_index)
return nsim_dev_port;
return NULL;
}
int nsim_dev_port_add(struct nsim_bus_dev *nsim_bus_dev, enum nsim_dev_port_type type,
unsigned int port_index)
{
struct nsim_dev *nsim_dev = dev_get_drvdata(&nsim_bus_dev->dev);
int err;
mutex_lock(&nsim_dev->port_list_lock);
if (__nsim_dev_port_lookup(nsim_dev, type, port_index))
err = -EEXIST;
else
err = __nsim_dev_port_add(nsim_dev, type, port_index);
mutex_unlock(&nsim_dev->port_list_lock);
return err;
}
int nsim_dev_port_del(struct nsim_bus_dev *nsim_bus_dev, enum nsim_dev_port_type type,
unsigned int port_index)
{
struct nsim_dev *nsim_dev = dev_get_drvdata(&nsim_bus_dev->dev);
struct nsim_dev_port *nsim_dev_port;
int err = 0;
mutex_lock(&nsim_dev->port_list_lock);
nsim_dev_port = __nsim_dev_port_lookup(nsim_dev, type, port_index);
if (!nsim_dev_port)
err = -ENOENT;
else
__nsim_dev_port_del(nsim_dev_port);
mutex_unlock(&nsim_dev->port_list_lock);
return err;
}
int nsim_dev_init(void)
{
nsim_dev_ddir = debugfs_create_dir(DRV_NAME, NULL);
return PTR_ERR_OR_ZERO(nsim_dev_ddir);
}
void nsim_dev_exit(void)
{
debugfs_remove_recursive(nsim_dev_ddir);
}