UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/arch/powerpc/include/asm/udbg.h

62 lines
2.1 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
[PATCH] powerpc: Make early debugging configurable via Kconfig This patch adds Kconfig entries to control the early debugging options, currently in setup_64.c. Doing this via Kconfig rather than #defines means you can have one source tree, which is buildable for multiple platforms - and you can enable the correct early debug option for each platform via .config. I made udbg_early_init() a static inline because otherwise GCC is to daft to optimise it away when debugging is off. Now that we have udbg_init_rtas() we can make call_rtas_display_status* static. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11 08:54:09 +08:00
* (c) 2001, 2006 IBM Corporation.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
[PATCH] powerpc: Move udbg code to arch/powerpc Since the udbg code in ppc64 has no ppc32 equivalent, move it straight over into arch/powerpc (and include/asm-powerpc for udbg.h). In time, we probably want to meld the various bits and pieces of 32-bit early debugging code into udbg, but for now only include it on CONFIG_PPC64=y builds. The only change during the move is to standardise the protecting #ifdef/#define in udbg.h, and move its banner comment above the initial #ifdef (which seems to be normal practice). Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64). Built for 32bit multiplatform (ARCH=powerpc). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-11 13:42:12 +08:00
#ifndef _ASM_POWERPC_UDBG_H
#define _ASM_POWERPC_UDBG_H
[PATCH] powerpc: sanitize header files for user space includes include/asm-ppc/ had #ifdef __KERNEL__ in all header files that are not meant for use by user space, include/asm-powerpc does not have this yet. This patch gets us a lot closer there. There are a few cases where I was not sure, so I left them out. I have verified that no CONFIG_* symbols are used outside of __KERNEL__ any more and that there are no obvious compile errors when including any of the headers in user space libraries. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-17 05:43:46 +08:00
#ifdef __KERNEL__
[PATCH] powerpc: Move udbg code to arch/powerpc Since the udbg code in ppc64 has no ppc32 equivalent, move it straight over into arch/powerpc (and include/asm-powerpc for udbg.h). In time, we probably want to meld the various bits and pieces of 32-bit early debugging code into udbg, but for now only include it on CONFIG_PPC64=y builds. The only change during the move is to standardise the protecting #ifdef/#define in udbg.h, and move its banner comment above the initial #ifdef (which seems to be normal practice). Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64). Built for 32bit multiplatform (ARCH=powerpc). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-11 13:42:12 +08:00
#include <linux/compiler.h>
#include <linux/init.h>
[PATCH] powerpc: Unify udbg (#2) This patch unifies udbg for both ppc32 and ppc64 when building the merged achitecture. xmon now has a single "back end". The powermac udbg stuff gets enriched with some ADB capabilities and btext output. In addition, the early_init callback is now called on ppc32 as well, approx. in the same order as ppc64 regarding device-tree manipulations. The init sequences of ppc32 and ppc64 are getting closer, I'll unify them in a later patch. For now, you can force udbg to the scc using "sccdbg" or to btext using "btextdbg" on powermacs. I'll implement a cleaner way of forcing udbg output to something else than the autodetected OF output device in a later patch. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-23 14:57:25 +08:00
extern void (*udbg_putc)(char c);
powerpc/udbg: Fix lost byte during console handover; change LFCR to CRLF When the console is on a serial port to be driven by serial8250, a character can be lost from the end of the first line in the two-line sequence serial8250.0: ttyS0 at MMIO 0xe0004500 (irq = 42) is a 16550A console handover: boot [udbg0] -> real [ttyS0] This happens because udbg_puts or udbg_write stuff the last byte of the line into the Tx FIFO and return, whereupon the serial8250 initialization code immediately empties that FIFO. The fix: udbg_puts and udbg_write now wait for the Tx FIFO to clear before returning. This delays the system by one additional serial frame time for each line written by udbg, but the effect is not noticeable, a cumulative 17 milliseconds for 200 lines of early printk output at 115200 baud. Also, the routines in udbg_16550.c now emit CRLF instead of LFCR. Linux makes a point of emitting CRLF because, when serial output is captured to a file, LFCR sequences can confuse text editors. See http://lkml.org/lkml/2006/2/4/50 for some history. Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-03-09 15:52:41 +08:00
extern void (*udbg_flush)(void);
[PATCH] powerpc: udbg updates The udbg low level io layer has an issue with udbg_getc() returning a char (unsigned on ppc) instead of an int, thus the -1 if you had no available input device could end up turned into 0xff, filling your display with bogus characters. This fixes it, along with adding a little blob to xmon to do a delay before exiting when getting an EOF and fixing the detection of ADB keyboards in udbg_adb.c Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-30 13:54:12 +08:00
extern int (*udbg_getc)(void);
[PATCH] ppc64: Take udbg out of ppc_md Take udbg out of ppc_md. Allows us to not overwrite early udbg inits when assigning ppc_md. Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-06 09:56:42 +08:00
extern int (*udbg_getc_poll)(void);
extern void udbg_puts(const char *s);
extern int udbg_write(const char *s, int n);
[PATCH] ppc64: Consolidate early console and PPCDBG code Consolidate the early console and PPCDBG code in udbg.c Signed-off-by: Milton Miller <miltonm@bga.com> Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-06 09:57:27 +08:00
extern void register_early_udbg_console(void);
[PATCH] powerpc: udbg_printf() formatting attribute This patch allows the compiler to catch any printf-like mismatches for udbg_printf(). After some brute force building I've only found issues with my own code and lparcfg.c It could break some developers, but IMHO that would be goodness. Signed-off-by: Jimi Xenidis <jimix@watson.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-18 00:00:35 +08:00
extern void udbg_printf(const char *fmt, ...)
__attribute__ ((format (printf, 1, 2)));
[PATCH] powerpc: added a udbg_progress Added a common udbg_progress for use by ppc_md.progress() Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-21 06:37:07 +08:00
extern void udbg_progress(char *s, unsigned short hex);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] powerpc: serial port discovery (#2) This moves the discovery of legacy serial ports to a separate file, makes it common to ppc32 and ppc64, and reworks it to use the new OF address translators to get to the ports early. This new version can also detect some PCI serial cards using legacy chips and will probably match those discovered port with the default console choice. Only ppc64 gets udbg still yet, unifying udbg isn't finished yet. It also adds some speed-probing code to udbg so that the default console can come up at the same speed it was set to by the firmware. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-23 14:56:06 +08:00
extern void udbg_init_uart(void __iomem *comport, unsigned int speed,
unsigned int clock);
extern unsigned int udbg_probe_uart_speed(void __iomem *comport,
unsigned int clock);
powerpc: Merge in 64-bit powermac support. This brings in a lot of changes from arch/ppc64/kernel/pmac_*.c to arch/powerpc/platforms/powermac/*.c and makes various minor tweaks elsewhere. On the powermac we now initialize ppc_md by copying the whole pmac_md structure into it, which required some changes in the ordering of initializations of individual fields of it. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-22 14:02:39 +08:00
struct device_node;
[PATCH] powerpc: Unify udbg (#2) This patch unifies udbg for both ppc32 and ppc64 when building the merged achitecture. xmon now has a single "back end". The powermac udbg stuff gets enriched with some ADB capabilities and btext output. In addition, the early_init callback is now called on ppc32 as well, approx. in the same order as ppc64 regarding device-tree manipulations. The init sequences of ppc32 and ppc64 are getting closer, I'll unify them in a later patch. For now, you can force udbg to the scc using "sccdbg" or to btext using "btextdbg" on powermacs. I'll implement a cleaner way of forcing udbg output to something else than the autodetected OF output device in a later patch. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-23 14:57:25 +08:00
extern void udbg_scc_init(int force_scc);
extern int udbg_adb_init(int force_btext);
extern void udbg_adb_init_early(void);
[PATCH] powerpc: Make early debugging configurable via Kconfig This patch adds Kconfig entries to control the early debugging options, currently in setup_64.c. Doing this via Kconfig rather than #defines means you can have one source tree, which is buildable for multiple platforms - and you can enable the correct early debug option for each platform via .config. I made udbg_early_init() a static inline because otherwise GCC is to daft to optimise it away when debugging is off. Now that we have udbg_init_rtas() we can make call_rtas_display_status* static. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11 08:54:09 +08:00
extern void __init udbg_early_init(void);
extern void __init udbg_init_debug_lpar(void);
powerpc/pseries: Re-implement HVSI as part of hvc_vio On pseries machines, consoles are provided by the hypervisor using a low level get_chars/put_chars type interface. However, this is really just a transport to the service processor which implements them either as "raw" console (networked consoles, HMC, ...) or as "hvsi" serial ports. The later is a simple packet protocol on top of the raw character interface that is supposed to convey additional "serial port" style semantics. In practice however, all it does is provide a way to read the CD line and set/clear our DTR line, that's it. We currently implement the "raw" protocol as an hvc console backend (/dev/hvcN) and the "hvsi" protocol using a separate tty driver (/dev/hvsi0). However this is quite impractical. The arbitrary difference between the two type of devices has been a major source of user (and distro) confusion. Additionally, there's an additional mini -hvsi implementation in the pseries platform code for our low level debug console and early boot kernel messages, which means code duplication, though that low level variant is impractical as it's incapable of doing the initial protocol negociation to establish the link to the FSP. This essentially replaces the dedicated hvsi driver and the platform udbg code completely by extending the existing hvc_vio backend used in "raw" mode so that: - It now supports HVSI as well - We add support for hvc backend providing tiocm{get,set} - It also provides a udbg interface for early debug and boot console This is overall less code, though this will only be obvious once we remove the old "hvsi" driver, which is still available for now. When the old driver is enabled, the new code still kicks in for the low level udbg console, replacing the old mini implementation in the platform code, it just doesn't provide the higher level "hvc" interface. In addition to producing generally simler code, this has several benefits over our current situation: - The user/distro only has to deal with /dev/hvcN for the hypervisor console, avoiding all sort of confusion that has plagued us in the past - The tty, kernel and low level debug console all use the same code base which supports the full protocol establishment process, thus the console is now available much earlier than it used to be with the old HVSI driver. The kernel console works much earlier and udbg is available much earlier too. Hackers can enable a hard coded very-early debug console as well that works with HVSI (previously that was only supported for the "raw" mode). I've tried to keep the same semantics as hvsi relative to how I react to things like CD changes, with some subtle differences though: - I clear DTR on close if HUPCL is set - Current hvsi triggers a hangup if it detects a up->down transition on CD (you can still open a console with CD down). My new implementation triggers a hangup if the link to the FSP is severed, and severs it upon detecting a up->down transition on CD. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-12 11:46:38 +08:00
extern void __init udbg_init_debug_lpar_hvsi(void);
[PATCH] powerpc: Make early debugging configurable via Kconfig This patch adds Kconfig entries to control the early debugging options, currently in setup_64.c. Doing this via Kconfig rather than #defines means you can have one source tree, which is buildable for multiple platforms - and you can enable the correct early debug option for each platform via .config. I made udbg_early_init() a static inline because otherwise GCC is to daft to optimise it away when debugging is off. Now that we have udbg_init_rtas() we can make call_rtas_display_status* static. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11 08:54:09 +08:00
extern void __init udbg_init_pmac_realmode(void);
extern void __init udbg_init_maple_realmode(void);
[POWERPC] pasemi: UART udbg support Early debug output for PA Semi UART. Uses the 2.05 CI real mode ops. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-05 06:36:49 +08:00
extern void __init udbg_init_pas_realmode(void);
[POWERPC] Add udbg support for RTAS console Add udbg hooks for the RTAS console, based on the RTAS put-term-char and get-term-char calls. Along with my previous patches, this should enable debugging as soon as early_init_dt_scan_rtas() is called. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-23 16:20:16 +08:00
extern void __init udbg_init_rtas_panel(void);
extern void __init udbg_init_rtas_console(void);
[POWERPC] Celleb: support udbg This patch adds udbg support for Celleb platform. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-02 15:43:21 +08:00
extern void __init udbg_init_debug_beat(void);
[POWERPC] Use udbg_early_init() on ppc32 udbg_early_init() is a function used on 64 bit systems, which initializes whichever early udbg backend is configured. This function is not called on 32-bit, however if btext early debug is enabled it does have an explicit, inline, #ifdef-ed assignment performing analagous initialization. This patch makes things more uniform by folding the btext initialization as an option into udbg_early_init() and calling that from the 32-bit setup path. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-13 12:54:22 +08:00
extern void __init udbg_init_btext(void);
[POWERPC] Early serial debug support for PPC44x This adds support for early serial debugging via the built in port on IBM/AMCC PowerPC 44x CPUs. It uses a bolted TLB entry in address space 1 for the UART's mapping, allowing robust debugging both before and after the initialization of the MMU. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08 10:59:31 +08:00
extern void __init udbg_init_44x_as1(void);
[POWERPC] 4xx: Add early udbg support for 40x processors This adds some basic real mode based early udbg support for 40x in order to debug things more easily Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-21 12:39:26 +08:00
extern void __init udbg_init_40x_realmode(void);
[POWERPC] Add early debug console for CPM serial ports. This code assumes that the ports have been previously set up, with buffers in DPRAM. Signed-off-by: Scott Wood <scottwood@freescale.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-17 00:43:43 +08:00
extern void __init udbg_init_cpm(void);
powerpc: gamecube/wii: early debugging using usbgecko Add support for using the USB Gecko adapter as an early debugging console on the Nintendo GameCube and Wii video game consoles. The USB Gecko is a 3rd party memory card interface adapter that provides a EXI (External Interface) to USB serial converter. Signed-off-by: Albert Herranz <albert_herranz@yahoo.es> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-12-12 14:31:51 +08:00
extern void __init udbg_init_usbgecko(void);
powerpc: Add early debug for WSP platforms Signed-off-by: Jack Miller <jack@codezen.org> Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-15 06:32:08 +08:00
extern void __init udbg_init_wsp(void);
tty/powerpc: introduce the ePAPR embedded hypervisor byte channel driver The ePAPR embedded hypervisor specification provides an API for "byte channels", which are serial-like virtual devices for sending and receiving streams of bytes. This driver provides Linux kernel support for byte channels via three distinct interfaces: 1) An early-console (udbg) driver. This provides early console output through a byte channel. The byte channel handle must be specified in a Kconfig option. 2) A normal console driver. Output is sent to the byte channel designated for stdout in the device tree. The console driver is for handling kernel printk calls. 3) A tty driver, which is used to handle user-space input and output. The byte channel used for the console is designated as the default tty. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-07-09 08:06:12 +08:00
extern void __init udbg_init_ehv_bc(void);
powerpc/ps3: Add gelic udbg driver Add a new udbg driver for the PS3 gelic Ehthernet device. This driver shares only a few stucture and constant definitions with the gelic Ethernet device driver, so is implemented as a stand-alone driver with no dependencies on the gelic Ethernet device driver. Signed-off-by: Hector Martin <hector@marcansoft.com> Signed-off-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-08-31 14:32:26 +08:00
extern void __init udbg_init_ps3gelic(void);
powerpc/powernv: Support for OPAL console This adds a udbg and an hvc console backend for supporting a console using the OPAL console interfaces. On OPAL v1 we have hvc0 mapped to whatever console the system was configured for (network or hvsi serial port) via the service processor. On OPAL v2 we have hvcN mapped to the Nth console provided by OPAL which generally corresponds to: hvc0 : network console (raw protocol) hvc1 : serial port S1 (hvsi) hvc2 : serial port S2 (hvsi) Note: At this point, early debug console only works with OPAL v1 and shouldn't be enabled in a normal kernel. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20 01:44:59 +08:00
extern void __init udbg_init_debug_opal_raw(void);
extern void __init udbg_init_debug_opal_hvsi(void);
[PATCH] powerpc: Make early debugging configurable via Kconfig This patch adds Kconfig entries to control the early debugging options, currently in setup_64.c. Doing this via Kconfig rather than #defines means you can have one source tree, which is buildable for multiple platforms - and you can enable the correct early debug option for each platform via .config. I made udbg_early_init() a static inline because otherwise GCC is to daft to optimise it away when debugging is off. Now that we have udbg_init_rtas() we can make call_rtas_display_status* static. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-11 08:54:09 +08:00
[PATCH] powerpc: sanitize header files for user space includes include/asm-ppc/ had #ifdef __KERNEL__ in all header files that are not meant for use by user space, include/asm-powerpc does not have this yet. This patch gets us a lot closer there. There are a few cases where I was not sure, so I left them out. I have verified that no CONFIG_* symbols are used outside of __KERNEL__ any more and that there are no obvious compile errors when including any of the headers in user space libraries. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-12-17 05:43:46 +08:00
#endif /* __KERNEL__ */
[PATCH] powerpc: Move udbg code to arch/powerpc Since the udbg code in ppc64 has no ppc32 equivalent, move it straight over into arch/powerpc (and include/asm-powerpc for udbg.h). In time, we probably want to meld the various bits and pieces of 32-bit early debugging code into udbg, but for now only include it on CONFIG_PPC64=y builds. The only change during the move is to standardise the protecting #ifdef/#define in udbg.h, and move its banner comment above the initial #ifdef (which seems to be normal practice). Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64). Built for 32bit multiplatform (ARCH=powerpc). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-11-11 13:42:12 +08:00
#endif /* _ASM_POWERPC_UDBG_H */