OpenCloudOS-Kernel/drivers/net/wireless/rsi/rsi_91x_hal.c

1163 lines
31 KiB
C
Raw Normal View History

/**
* Copyright (c) 2014 Redpine Signals Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include <linux/firmware.h>
#include <net/bluetooth/bluetooth.h>
#include "rsi_mgmt.h"
#include "rsi_hal.h"
#include "rsi_sdio.h"
#include "rsi_common.h"
/* FLASH Firmware */
static struct ta_metadata metadata_flash_content[] = {
{"flash_content", 0x00010000},
{"rsi/rs9113_wlan_qspi.rps", 0x00010000},
{"rsi/rs9113_wlan_bt_dual_mode.rps", 0x00010000},
{"flash_content", 0x00010000},
{"rsi/rs9113_ap_bt_dual_mode.rps", 0x00010000},
};
static struct ta_metadata metadata[] = {{"pmemdata_dummy", 0x00000000},
{"rsi/rs9116_wlan.rps", 0x00000000},
{"rsi/rs9116_wlan_bt_classic.rps", 0x00000000},
{"rsi/pmemdata_dummy", 0x00000000},
{"rsi/rs9116_wlan_bt_classic.rps", 0x00000000}
};
int rsi_send_pkt_to_bus(struct rsi_common *common, struct sk_buff *skb)
{
struct rsi_hw *adapter = common->priv;
int status;
if (common->coex_mode > 1)
mutex_lock(&common->tx_bus_mutex);
status = adapter->host_intf_ops->write_pkt(common->priv,
skb->data, skb->len);
if (common->coex_mode > 1)
mutex_unlock(&common->tx_bus_mutex);
return status;
}
int rsi_prepare_mgmt_desc(struct rsi_common *common, struct sk_buff *skb)
{
struct rsi_hw *adapter = common->priv;
struct ieee80211_hdr *wh = NULL;
struct ieee80211_tx_info *info;
struct ieee80211_conf *conf = &adapter->hw->conf;
struct ieee80211_vif *vif;
struct rsi_mgmt_desc *mgmt_desc;
struct skb_info *tx_params;
struct rsi_xtended_desc *xtend_desc = NULL;
u8 header_size;
u32 dword_align_bytes = 0;
if (skb->len > MAX_MGMT_PKT_SIZE) {
rsi_dbg(INFO_ZONE, "%s: Dropping mgmt pkt > 512\n", __func__);
return -EINVAL;
}
info = IEEE80211_SKB_CB(skb);
tx_params = (struct skb_info *)info->driver_data;
vif = tx_params->vif;
/* Update header size */
header_size = FRAME_DESC_SZ + sizeof(struct rsi_xtended_desc);
if (header_size > skb_headroom(skb)) {
rsi_dbg(ERR_ZONE,
"%s: Failed to add extended descriptor\n",
__func__);
return -ENOSPC;
}
skb_push(skb, header_size);
dword_align_bytes = ((unsigned long)skb->data & 0x3f);
if (dword_align_bytes > skb_headroom(skb)) {
rsi_dbg(ERR_ZONE,
"%s: Failed to add dword align\n", __func__);
return -ENOSPC;
}
skb_push(skb, dword_align_bytes);
header_size += dword_align_bytes;
tx_params->internal_hdr_size = header_size;
memset(&skb->data[0], 0, header_size);
wh = (struct ieee80211_hdr *)&skb->data[header_size];
mgmt_desc = (struct rsi_mgmt_desc *)skb->data;
xtend_desc = (struct rsi_xtended_desc *)&skb->data[FRAME_DESC_SZ];
rsi_set_len_qno(&mgmt_desc->len_qno, (skb->len - FRAME_DESC_SZ),
RSI_WIFI_MGMT_Q);
mgmt_desc->frame_type = TX_DOT11_MGMT;
mgmt_desc->header_len = MIN_802_11_HDR_LEN;
mgmt_desc->xtend_desc_size = header_size - FRAME_DESC_SZ;
if (ieee80211_is_probe_req(wh->frame_control))
mgmt_desc->frame_info = cpu_to_le16(RSI_INSERT_SEQ_IN_FW);
mgmt_desc->frame_info |= cpu_to_le16(RATE_INFO_ENABLE);
if (is_broadcast_ether_addr(wh->addr1))
mgmt_desc->frame_info |= cpu_to_le16(RSI_BROADCAST_PKT);
mgmt_desc->seq_ctrl =
cpu_to_le16(IEEE80211_SEQ_TO_SN(le16_to_cpu(wh->seq_ctrl)));
if ((common->band == NL80211_BAND_2GHZ) && !common->p2p_enabled)
mgmt_desc->rate_info = cpu_to_le16(RSI_RATE_1);
else
mgmt_desc->rate_info = cpu_to_le16(RSI_RATE_6);
if (conf_is_ht40(conf))
mgmt_desc->bbp_info = cpu_to_le16(FULL40M_ENABLE);
if (ieee80211_is_probe_resp(wh->frame_control)) {
mgmt_desc->misc_flags |= (RSI_ADD_DELTA_TSF_VAP_ID |
RSI_FETCH_RETRY_CNT_FRM_HST);
#define PROBE_RESP_RETRY_CNT 3
xtend_desc->retry_cnt = PROBE_RESP_RETRY_CNT;
}
if (((vif->type == NL80211_IFTYPE_AP) ||
(vif->type == NL80211_IFTYPE_P2P_GO)) &&
(ieee80211_is_action(wh->frame_control))) {
struct rsi_sta *rsta = rsi_find_sta(common, wh->addr1);
if (rsta)
mgmt_desc->sta_id = tx_params->sta_id;
else
return -EINVAL;
}
mgmt_desc->rate_info |=
cpu_to_le16((tx_params->vap_id << RSI_DESC_VAP_ID_OFST) &
RSI_DESC_VAP_ID_MASK);
return 0;
}
/* This function prepares descriptor for given data packet */
int rsi_prepare_data_desc(struct rsi_common *common, struct sk_buff *skb)
{
struct rsi_hw *adapter = common->priv;
struct ieee80211_vif *vif;
struct ieee80211_hdr *wh = NULL;
struct ieee80211_tx_info *info;
struct skb_info *tx_params;
struct rsi_data_desc *data_desc;
struct rsi_xtended_desc *xtend_desc;
u8 ieee80211_size = MIN_802_11_HDR_LEN;
u8 header_size;
u8 vap_id = 0;
u8 dword_align_bytes;
u16 seq_num;
info = IEEE80211_SKB_CB(skb);
vif = info->control.vif;
tx_params = (struct skb_info *)info->driver_data;
header_size = FRAME_DESC_SZ + sizeof(struct rsi_xtended_desc);
if (header_size > skb_headroom(skb)) {
rsi_dbg(ERR_ZONE, "%s: Unable to send pkt\n", __func__);
return -ENOSPC;
}
skb_push(skb, header_size);
dword_align_bytes = ((unsigned long)skb->data & 0x3f);
if (header_size > skb_headroom(skb)) {
rsi_dbg(ERR_ZONE, "%s: Not enough headroom\n", __func__);
return -ENOSPC;
}
skb_push(skb, dword_align_bytes);
header_size += dword_align_bytes;
tx_params->internal_hdr_size = header_size;
data_desc = (struct rsi_data_desc *)skb->data;
memset(data_desc, 0, header_size);
xtend_desc = (struct rsi_xtended_desc *)&skb->data[FRAME_DESC_SZ];
wh = (struct ieee80211_hdr *)&skb->data[header_size];
seq_num = IEEE80211_SEQ_TO_SN(le16_to_cpu(wh->seq_ctrl));
data_desc->xtend_desc_size = header_size - FRAME_DESC_SZ;
if (ieee80211_is_data_qos(wh->frame_control)) {
ieee80211_size += 2;
data_desc->mac_flags |= cpu_to_le16(RSI_QOS_ENABLE);
}
if (((vif->type == NL80211_IFTYPE_STATION) ||
(vif->type == NL80211_IFTYPE_P2P_CLIENT)) &&
(adapter->ps_state == PS_ENABLED))
wh->frame_control |= cpu_to_le16(RSI_SET_PS_ENABLE);
if ((!(info->flags & IEEE80211_TX_INTFL_DONT_ENCRYPT)) &&
(common->secinfo.security_enable)) {
if (rsi_is_cipher_wep(common))
ieee80211_size += 4;
else
ieee80211_size += 8;
data_desc->mac_flags |= cpu_to_le16(RSI_ENCRYPT_PKT);
}
rsi_set_len_qno(&data_desc->len_qno, (skb->len - FRAME_DESC_SZ),
RSI_WIFI_DATA_Q);
data_desc->header_len = ieee80211_size;
if (common->min_rate != RSI_RATE_AUTO) {
/* Send fixed rate */
data_desc->frame_info = cpu_to_le16(RATE_INFO_ENABLE);
data_desc->rate_info = cpu_to_le16(common->min_rate);
if (conf_is_ht40(&common->priv->hw->conf))
data_desc->bbp_info = cpu_to_le16(FULL40M_ENABLE);
if ((common->vif_info[0].sgi) && (common->min_rate & 0x100)) {
/* Only MCS rates */
data_desc->rate_info |=
cpu_to_le16(ENABLE_SHORTGI_RATE);
}
}
if (skb->protocol == cpu_to_be16(ETH_P_PAE)) {
rsi_dbg(INFO_ZONE, "*** Tx EAPOL ***\n");
data_desc->frame_info = cpu_to_le16(RATE_INFO_ENABLE);
if (common->band == NL80211_BAND_5GHZ)
data_desc->rate_info = cpu_to_le16(RSI_RATE_6);
else
data_desc->rate_info = cpu_to_le16(RSI_RATE_1);
data_desc->mac_flags |= cpu_to_le16(RSI_REKEY_PURPOSE);
data_desc->misc_flags |= RSI_FETCH_RETRY_CNT_FRM_HST;
#define EAPOL_RETRY_CNT 15
xtend_desc->retry_cnt = EAPOL_RETRY_CNT;
if (common->eapol4_confirm)
skb->priority = VO_Q;
else
rsi_set_len_qno(&data_desc->len_qno,
(skb->len - FRAME_DESC_SZ),
RSI_WIFI_MGMT_Q);
if ((skb->len - header_size) == EAPOL4_PACKET_LEN) {
data_desc->misc_flags |=
RSI_DESC_REQUIRE_CFM_TO_HOST;
xtend_desc->confirm_frame_type = EAPOL4_CONFIRM;
}
}
data_desc->mac_flags |= cpu_to_le16(seq_num & 0xfff);
data_desc->qid_tid = ((skb->priority & 0xf) |
((tx_params->tid & 0xf) << 4));
data_desc->sta_id = tx_params->sta_id;
if ((is_broadcast_ether_addr(wh->addr1)) ||
(is_multicast_ether_addr(wh->addr1))) {
data_desc->frame_info = cpu_to_le16(RATE_INFO_ENABLE);
data_desc->frame_info |= cpu_to_le16(RSI_BROADCAST_PKT);
data_desc->sta_id = vap_id;
if ((vif->type == NL80211_IFTYPE_AP) ||
(vif->type == NL80211_IFTYPE_P2P_GO)) {
if (common->band == NL80211_BAND_5GHZ)
data_desc->rate_info = cpu_to_le16(RSI_RATE_6);
else
data_desc->rate_info = cpu_to_le16(RSI_RATE_1);
}
}
if (((vif->type == NL80211_IFTYPE_AP) ||
(vif->type == NL80211_IFTYPE_P2P_GO)) &&
(ieee80211_has_moredata(wh->frame_control)))
data_desc->frame_info |= cpu_to_le16(MORE_DATA_PRESENT);
data_desc->rate_info |=
cpu_to_le16((tx_params->vap_id << RSI_DESC_VAP_ID_OFST) &
RSI_DESC_VAP_ID_MASK);
return 0;
}
/* This function sends received data packet from driver to device */
int rsi_send_data_pkt(struct rsi_common *common, struct sk_buff *skb)
{
struct rsi_hw *adapter = common->priv;
struct ieee80211_vif *vif;
struct ieee80211_tx_info *info;
struct ieee80211_bss_conf *bss;
int status = -EINVAL;
if (!skb)
return 0;
if (common->iface_down)
goto err;
info = IEEE80211_SKB_CB(skb);
if (!info->control.vif)
goto err;
vif = info->control.vif;
bss = &vif->bss_conf;
if (((vif->type == NL80211_IFTYPE_STATION) ||
(vif->type == NL80211_IFTYPE_P2P_CLIENT)) &&
(!bss->assoc))
goto err;
status = rsi_send_pkt_to_bus(common, skb);
if (status)
rsi_dbg(ERR_ZONE, "%s: Failed to write pkt\n", __func__);
err:
++common->tx_stats.total_tx_pkt_freed[skb->priority];
rsi_indicate_tx_status(adapter, skb, status);
return status;
}
/**
* rsi_send_mgmt_pkt() - This functions sends the received management packet
* from driver to device.
* @common: Pointer to the driver private structure.
* @skb: Pointer to the socket buffer structure.
*
* Return: status: 0 on success, -1 on failure.
*/
int rsi_send_mgmt_pkt(struct rsi_common *common,
struct sk_buff *skb)
{
struct rsi_hw *adapter = common->priv;
struct ieee80211_bss_conf *bss;
struct ieee80211_hdr *wh;
struct ieee80211_tx_info *info;
struct skb_info *tx_params;
struct rsi_mgmt_desc *mgmt_desc;
struct rsi_xtended_desc *xtend_desc;
int status = -E2BIG;
u8 header_size;
info = IEEE80211_SKB_CB(skb);
tx_params = (struct skb_info *)info->driver_data;
header_size = tx_params->internal_hdr_size;
if (tx_params->flags & INTERNAL_MGMT_PKT) {
status = adapter->host_intf_ops->write_pkt(common->priv,
(u8 *)skb->data,
skb->len);
if (status) {
rsi_dbg(ERR_ZONE,
"%s: Failed to write the packet\n", __func__);
}
dev_kfree_skb(skb);
return status;
}
bss = &info->control.vif->bss_conf;
wh = (struct ieee80211_hdr *)&skb->data[header_size];
mgmt_desc = (struct rsi_mgmt_desc *)skb->data;
xtend_desc = (struct rsi_xtended_desc *)&skb->data[FRAME_DESC_SZ];
/* Indicate to firmware to give cfm for probe */
if (ieee80211_is_probe_req(wh->frame_control) && !bss->assoc) {
rsi_dbg(INFO_ZONE,
"%s: blocking mgmt queue\n", __func__);
mgmt_desc->misc_flags = RSI_DESC_REQUIRE_CFM_TO_HOST;
xtend_desc->confirm_frame_type = PROBEREQ_CONFIRM;
common->mgmt_q_block = true;
rsi_dbg(INFO_ZONE, "Mgmt queue blocked\n");
}
status = rsi_send_pkt_to_bus(common, skb);
if (status)
rsi_dbg(ERR_ZONE, "%s: Failed to write the packet\n", __func__);
rsi_indicate_tx_status(common->priv, skb, status);
return status;
}
int rsi_send_bt_pkt(struct rsi_common *common, struct sk_buff *skb)
{
int status = -EINVAL;
u8 header_size = 0;
struct rsi_bt_desc *bt_desc;
u8 queueno = ((skb->data[1] >> 4) & 0xf);
if (queueno == RSI_BT_MGMT_Q) {
status = rsi_send_pkt_to_bus(common, skb);
if (status)
rsi_dbg(ERR_ZONE, "%s: Failed to write bt mgmt pkt\n",
__func__);
goto out;
}
header_size = FRAME_DESC_SZ;
if (header_size > skb_headroom(skb)) {
rsi_dbg(ERR_ZONE, "%s: Not enough headroom\n", __func__);
status = -ENOSPC;
goto out;
}
skb_push(skb, header_size);
memset(skb->data, 0, header_size);
bt_desc = (struct rsi_bt_desc *)skb->data;
rsi_set_len_qno(&bt_desc->len_qno, (skb->len - FRAME_DESC_SZ),
RSI_BT_DATA_Q);
bt_desc->bt_pkt_type = cpu_to_le16(bt_cb(skb)->pkt_type);
status = rsi_send_pkt_to_bus(common, skb);
if (status)
rsi_dbg(ERR_ZONE, "%s: Failed to write bt pkt\n", __func__);
out:
dev_kfree_skb(skb);
return status;
}
int rsi_prepare_beacon(struct rsi_common *common, struct sk_buff *skb)
{
struct rsi_hw *adapter = (struct rsi_hw *)common->priv;
struct rsi_data_desc *bcn_frm;
struct ieee80211_hw *hw = common->priv->hw;
struct ieee80211_conf *conf = &hw->conf;
struct ieee80211_vif *vif;
struct sk_buff *mac_bcn;
u8 vap_id = 0, i;
u16 tim_offset = 0;
for (i = 0; i < RSI_MAX_VIFS; i++) {
vif = adapter->vifs[i];
if (!vif)
continue;
if ((vif->type == NL80211_IFTYPE_AP) ||
(vif->type == NL80211_IFTYPE_P2P_GO))
break;
}
if (!vif)
return -EINVAL;
mac_bcn = ieee80211_beacon_get_tim(adapter->hw,
vif,
&tim_offset, NULL);
if (!mac_bcn) {
rsi_dbg(ERR_ZONE, "Failed to get beacon from mac80211\n");
return -EINVAL;
}
common->beacon_cnt++;
bcn_frm = (struct rsi_data_desc *)skb->data;
rsi_set_len_qno(&bcn_frm->len_qno, mac_bcn->len, RSI_WIFI_DATA_Q);
bcn_frm->header_len = MIN_802_11_HDR_LEN;
bcn_frm->frame_info = cpu_to_le16(RSI_DATA_DESC_MAC_BBP_INFO |
RSI_DATA_DESC_NO_ACK_IND |
RSI_DATA_DESC_BEACON_FRAME |
RSI_DATA_DESC_INSERT_TSF |
RSI_DATA_DESC_INSERT_SEQ_NO |
RATE_INFO_ENABLE);
bcn_frm->rate_info = cpu_to_le16(vap_id << 14);
bcn_frm->qid_tid = BEACON_HW_Q;
if (conf_is_ht40_plus(conf)) {
bcn_frm->bbp_info = cpu_to_le16(LOWER_20_ENABLE);
bcn_frm->bbp_info |= cpu_to_le16(LOWER_20_ENABLE >> 12);
} else if (conf_is_ht40_minus(conf)) {
bcn_frm->bbp_info = cpu_to_le16(UPPER_20_ENABLE);
bcn_frm->bbp_info |= cpu_to_le16(UPPER_20_ENABLE >> 12);
}
if (common->band == NL80211_BAND_2GHZ)
bcn_frm->bbp_info |= cpu_to_le16(RSI_RATE_1);
else
bcn_frm->bbp_info |= cpu_to_le16(RSI_RATE_6);
if (mac_bcn->data[tim_offset + 2] == 0)
bcn_frm->frame_info |= cpu_to_le16(RSI_DATA_DESC_DTIM_BEACON);
memcpy(&skb->data[FRAME_DESC_SZ], mac_bcn->data, mac_bcn->len);
skb_put(skb, mac_bcn->len + FRAME_DESC_SZ);
dev_kfree_skb(mac_bcn);
return 0;
}
static void bl_cmd_timeout(struct timer_list *t)
{
struct rsi_hw *adapter = from_timer(adapter, t, bl_cmd_timer);
adapter->blcmd_timer_expired = true;
del_timer(&adapter->bl_cmd_timer);
}
static int bl_start_cmd_timer(struct rsi_hw *adapter, u32 timeout)
{
timer_setup(&adapter->bl_cmd_timer, bl_cmd_timeout, 0);
adapter->bl_cmd_timer.expires = (msecs_to_jiffies(timeout) + jiffies);
adapter->blcmd_timer_expired = false;
add_timer(&adapter->bl_cmd_timer);
return 0;
}
static int bl_stop_cmd_timer(struct rsi_hw *adapter)
{
adapter->blcmd_timer_expired = false;
if (timer_pending(&adapter->bl_cmd_timer))
del_timer(&adapter->bl_cmd_timer);
return 0;
}
static int bl_write_cmd(struct rsi_hw *adapter, u8 cmd, u8 exp_resp,
u16 *cmd_resp)
{
struct rsi_host_intf_ops *hif_ops = adapter->host_intf_ops;
u32 regin_val = 0, regout_val = 0;
u32 regin_input = 0;
u8 output = 0;
int status;
regin_input = (REGIN_INPUT | adapter->priv->coex_mode);
while (!adapter->blcmd_timer_expired) {
regin_val = 0;
status = hif_ops->master_reg_read(adapter, SWBL_REGIN,
&regin_val, 2);
if (status < 0) {
rsi_dbg(ERR_ZONE,
"%s: Command %0x REGIN reading failed..\n",
__func__, cmd);
return status;
}
mdelay(1);
if ((regin_val >> 12) != REGIN_VALID)
break;
}
if (adapter->blcmd_timer_expired) {
rsi_dbg(ERR_ZONE,
"%s: Command %0x REGIN reading timed out..\n",
__func__, cmd);
return -ETIMEDOUT;
}
rsi_dbg(INFO_ZONE,
"Issuing write to Regin val:%0x sending cmd:%0x\n",
regin_val, (cmd | regin_input << 8));
status = hif_ops->master_reg_write(adapter, SWBL_REGIN,
(cmd | regin_input << 8), 2);
if (status < 0)
return status;
mdelay(1);
if (cmd == LOAD_HOSTED_FW || cmd == JUMP_TO_ZERO_PC) {
/* JUMP_TO_ZERO_PC doesn't expect
* any response. So return from here
*/
return 0;
}
while (!adapter->blcmd_timer_expired) {
regout_val = 0;
status = hif_ops->master_reg_read(adapter, SWBL_REGOUT,
&regout_val, 2);
if (status < 0) {
rsi_dbg(ERR_ZONE,
"%s: Command %0x REGOUT reading failed..\n",
__func__, cmd);
return status;
}
mdelay(1);
if ((regout_val >> 8) == REGOUT_VALID)
break;
}
if (adapter->blcmd_timer_expired) {
rsi_dbg(ERR_ZONE,
"%s: Command %0x REGOUT reading timed out..\n",
__func__, cmd);
return status;
}
*cmd_resp = ((u16 *)&regout_val)[0] & 0xffff;
output = ((u8 *)&regout_val)[0] & 0xff;
status = hif_ops->master_reg_write(adapter, SWBL_REGOUT,
(cmd | REGOUT_INVALID << 8), 2);
if (status < 0) {
rsi_dbg(ERR_ZONE,
"%s: Command %0x REGOUT writing failed..\n",
__func__, cmd);
return status;
}
mdelay(1);
if (output != exp_resp) {
rsi_dbg(ERR_ZONE,
"%s: Recvd resp %x for cmd %0x\n",
__func__, output, cmd);
return -EINVAL;
}
rsi_dbg(INFO_ZONE,
"%s: Recvd Expected resp %x for cmd %0x\n",
__func__, output, cmd);
return 0;
}
static int bl_cmd(struct rsi_hw *adapter, u8 cmd, u8 exp_resp, char *str)
{
u16 regout_val = 0;
u32 timeout;
int status;
if ((cmd == EOF_REACHED) || (cmd == PING_VALID) || (cmd == PONG_VALID))
timeout = BL_BURN_TIMEOUT;
else
timeout = BL_CMD_TIMEOUT;
bl_start_cmd_timer(adapter, timeout);
status = bl_write_cmd(adapter, cmd, exp_resp, &regout_val);
if (status < 0) {
rsi_dbg(ERR_ZONE,
"%s: Command %s (%0x) writing failed..\n",
__func__, str, cmd);
return status;
}
bl_stop_cmd_timer(adapter);
return 0;
}
#define CHECK_SUM_OFFSET 20
#define LEN_OFFSET 8
#define ADDR_OFFSET 16
static int bl_write_header(struct rsi_hw *adapter, u8 *flash_content,
u32 content_size)
{
struct rsi_host_intf_ops *hif_ops = adapter->host_intf_ops;
rsi: fix nommu_map_sg overflow kernel panic Following overflow kernel panic is observed on some platforms while loading the driver. It is fixed if dynamically allocated memory is passed to SDIO instead of static one [ 927.513963] nommu_map_sg: overflow 17d54064ba7c+20 of device mask ffffffff [ 927.517712] Modules linked in: rsi_sdio(+) cmac bnep arc4 rsi_91x mac80211 cfg80211 btrsi rfcomm bluetooth ecdh_generic snd_soc_sst_bytcr_rt5660 [ 927.517861] CPU: 0 PID: 1624 Comm: insmod Tainted: G W 4.15.0-1000 #1 [ 927.517870] RIP: 0010:sdhci_send_command+0x5f0/0xa90 [sdhci] [ 927.517873] RSP: 0000:ffffac3fc064b6d8 EFLAGS: 00010086 [ 927.517895] Call Trace: [ 927.517908] ? __schedule+0x3cd/0x890 [ 927.517915] ? mod_timer+0x17b/0x3c0 [ 927.517922] sdhci_request+0x7c/0xf0 [sdhci] [ 927.517928] __mmc_start_request+0x5a/0x170 [ 927.517932] mmc_start_request+0x74/0x90 [ 927.517936] mmc_wait_for_req+0x87/0xe0 [ 927.517940] mmc_io_rw_extended+0x2fd/0x330 [ 927.517946] ? mmc_wait_data_done+0x30/0x30 [ 927.517951] sdio_io_rw_ext_helper+0x160/0x210 [ 927.517956] sdio_writesb+0x1d/0x20 [ 927.517966] rsi_sdio_write_register_multiple+0x68/0x110 [rsi_sdio] [ 927.517976] rsi_hal_device_init+0x357/0x910 [rsi_91x] [ 927.517983] ? rsi_hal_device_init+0x357/0x910 [rsi_91x] [ 927.517990] rsi_probe+0x2c6/0x450 [rsi_sdio] [ 927.517995] sdio_bus_probe+0xfc/0x110 [ 927.518000] driver_probe_device+0x2b3/0x490 [ 927.518005] __driver_attach+0xdf/0xf0 [ 927.518008] ? driver_probe_device+0x490/0x490 [ 927.518014] bus_for_each_dev+0x6c/0xc0 [ 927.518018] driver_attach+0x1e/0x20 [ 927.518021] bus_add_driver+0x1f4/0x270 [ 927.518028] ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio] [ 927.518031] driver_register+0x60/0xe0 [ 927.518038] ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio] [ 927.518041] sdio_register_driver+0x20/0x30 [ 927.518047] rsi_module_init+0x16/0x40 [rsi_sdio] Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-11 14:43:31 +08:00
struct bl_header *bl_hdr;
u32 write_addr, write_len;
int status;
rsi: fix nommu_map_sg overflow kernel panic Following overflow kernel panic is observed on some platforms while loading the driver. It is fixed if dynamically allocated memory is passed to SDIO instead of static one [ 927.513963] nommu_map_sg: overflow 17d54064ba7c+20 of device mask ffffffff [ 927.517712] Modules linked in: rsi_sdio(+) cmac bnep arc4 rsi_91x mac80211 cfg80211 btrsi rfcomm bluetooth ecdh_generic snd_soc_sst_bytcr_rt5660 [ 927.517861] CPU: 0 PID: 1624 Comm: insmod Tainted: G W 4.15.0-1000 #1 [ 927.517870] RIP: 0010:sdhci_send_command+0x5f0/0xa90 [sdhci] [ 927.517873] RSP: 0000:ffffac3fc064b6d8 EFLAGS: 00010086 [ 927.517895] Call Trace: [ 927.517908] ? __schedule+0x3cd/0x890 [ 927.517915] ? mod_timer+0x17b/0x3c0 [ 927.517922] sdhci_request+0x7c/0xf0 [sdhci] [ 927.517928] __mmc_start_request+0x5a/0x170 [ 927.517932] mmc_start_request+0x74/0x90 [ 927.517936] mmc_wait_for_req+0x87/0xe0 [ 927.517940] mmc_io_rw_extended+0x2fd/0x330 [ 927.517946] ? mmc_wait_data_done+0x30/0x30 [ 927.517951] sdio_io_rw_ext_helper+0x160/0x210 [ 927.517956] sdio_writesb+0x1d/0x20 [ 927.517966] rsi_sdio_write_register_multiple+0x68/0x110 [rsi_sdio] [ 927.517976] rsi_hal_device_init+0x357/0x910 [rsi_91x] [ 927.517983] ? rsi_hal_device_init+0x357/0x910 [rsi_91x] [ 927.517990] rsi_probe+0x2c6/0x450 [rsi_sdio] [ 927.517995] sdio_bus_probe+0xfc/0x110 [ 927.518000] driver_probe_device+0x2b3/0x490 [ 927.518005] __driver_attach+0xdf/0xf0 [ 927.518008] ? driver_probe_device+0x490/0x490 [ 927.518014] bus_for_each_dev+0x6c/0xc0 [ 927.518018] driver_attach+0x1e/0x20 [ 927.518021] bus_add_driver+0x1f4/0x270 [ 927.518028] ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio] [ 927.518031] driver_register+0x60/0xe0 [ 927.518038] ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio] [ 927.518041] sdio_register_driver+0x20/0x30 [ 927.518047] rsi_module_init+0x16/0x40 [rsi_sdio] Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-11 14:43:31 +08:00
bl_hdr = kzalloc(sizeof(*bl_hdr), GFP_KERNEL);
if (!bl_hdr)
return -ENOMEM;
bl_hdr->flags = 0;
bl_hdr->image_no = cpu_to_le32(adapter->priv->coex_mode);
bl_hdr->check_sum =
cpu_to_le32(*(u32 *)&flash_content[CHECK_SUM_OFFSET]);
bl_hdr->flash_start_address =
cpu_to_le32(*(u32 *)&flash_content[ADDR_OFFSET]);
bl_hdr->flash_len = cpu_to_le32(*(u32 *)&flash_content[LEN_OFFSET]);
write_len = sizeof(struct bl_header);
if (adapter->rsi_host_intf == RSI_HOST_INTF_USB) {
write_addr = PING_BUFFER_ADDRESS;
status = hif_ops->write_reg_multiple(adapter, write_addr,
rsi: fix nommu_map_sg overflow kernel panic Following overflow kernel panic is observed on some platforms while loading the driver. It is fixed if dynamically allocated memory is passed to SDIO instead of static one [ 927.513963] nommu_map_sg: overflow 17d54064ba7c+20 of device mask ffffffff [ 927.517712] Modules linked in: rsi_sdio(+) cmac bnep arc4 rsi_91x mac80211 cfg80211 btrsi rfcomm bluetooth ecdh_generic snd_soc_sst_bytcr_rt5660 [ 927.517861] CPU: 0 PID: 1624 Comm: insmod Tainted: G W 4.15.0-1000 #1 [ 927.517870] RIP: 0010:sdhci_send_command+0x5f0/0xa90 [sdhci] [ 927.517873] RSP: 0000:ffffac3fc064b6d8 EFLAGS: 00010086 [ 927.517895] Call Trace: [ 927.517908] ? __schedule+0x3cd/0x890 [ 927.517915] ? mod_timer+0x17b/0x3c0 [ 927.517922] sdhci_request+0x7c/0xf0 [sdhci] [ 927.517928] __mmc_start_request+0x5a/0x170 [ 927.517932] mmc_start_request+0x74/0x90 [ 927.517936] mmc_wait_for_req+0x87/0xe0 [ 927.517940] mmc_io_rw_extended+0x2fd/0x330 [ 927.517946] ? mmc_wait_data_done+0x30/0x30 [ 927.517951] sdio_io_rw_ext_helper+0x160/0x210 [ 927.517956] sdio_writesb+0x1d/0x20 [ 927.517966] rsi_sdio_write_register_multiple+0x68/0x110 [rsi_sdio] [ 927.517976] rsi_hal_device_init+0x357/0x910 [rsi_91x] [ 927.517983] ? rsi_hal_device_init+0x357/0x910 [rsi_91x] [ 927.517990] rsi_probe+0x2c6/0x450 [rsi_sdio] [ 927.517995] sdio_bus_probe+0xfc/0x110 [ 927.518000] driver_probe_device+0x2b3/0x490 [ 927.518005] __driver_attach+0xdf/0xf0 [ 927.518008] ? driver_probe_device+0x490/0x490 [ 927.518014] bus_for_each_dev+0x6c/0xc0 [ 927.518018] driver_attach+0x1e/0x20 [ 927.518021] bus_add_driver+0x1f4/0x270 [ 927.518028] ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio] [ 927.518031] driver_register+0x60/0xe0 [ 927.518038] ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio] [ 927.518041] sdio_register_driver+0x20/0x30 [ 927.518047] rsi_module_init+0x16/0x40 [rsi_sdio] Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-11 14:43:31 +08:00
(u8 *)bl_hdr, write_len);
if (status < 0) {
rsi_dbg(ERR_ZONE,
"%s: Failed to load Version/CRC structure\n",
__func__);
rsi: fix nommu_map_sg overflow kernel panic Following overflow kernel panic is observed on some platforms while loading the driver. It is fixed if dynamically allocated memory is passed to SDIO instead of static one [ 927.513963] nommu_map_sg: overflow 17d54064ba7c+20 of device mask ffffffff [ 927.517712] Modules linked in: rsi_sdio(+) cmac bnep arc4 rsi_91x mac80211 cfg80211 btrsi rfcomm bluetooth ecdh_generic snd_soc_sst_bytcr_rt5660 [ 927.517861] CPU: 0 PID: 1624 Comm: insmod Tainted: G W 4.15.0-1000 #1 [ 927.517870] RIP: 0010:sdhci_send_command+0x5f0/0xa90 [sdhci] [ 927.517873] RSP: 0000:ffffac3fc064b6d8 EFLAGS: 00010086 [ 927.517895] Call Trace: [ 927.517908] ? __schedule+0x3cd/0x890 [ 927.517915] ? mod_timer+0x17b/0x3c0 [ 927.517922] sdhci_request+0x7c/0xf0 [sdhci] [ 927.517928] __mmc_start_request+0x5a/0x170 [ 927.517932] mmc_start_request+0x74/0x90 [ 927.517936] mmc_wait_for_req+0x87/0xe0 [ 927.517940] mmc_io_rw_extended+0x2fd/0x330 [ 927.517946] ? mmc_wait_data_done+0x30/0x30 [ 927.517951] sdio_io_rw_ext_helper+0x160/0x210 [ 927.517956] sdio_writesb+0x1d/0x20 [ 927.517966] rsi_sdio_write_register_multiple+0x68/0x110 [rsi_sdio] [ 927.517976] rsi_hal_device_init+0x357/0x910 [rsi_91x] [ 927.517983] ? rsi_hal_device_init+0x357/0x910 [rsi_91x] [ 927.517990] rsi_probe+0x2c6/0x450 [rsi_sdio] [ 927.517995] sdio_bus_probe+0xfc/0x110 [ 927.518000] driver_probe_device+0x2b3/0x490 [ 927.518005] __driver_attach+0xdf/0xf0 [ 927.518008] ? driver_probe_device+0x490/0x490 [ 927.518014] bus_for_each_dev+0x6c/0xc0 [ 927.518018] driver_attach+0x1e/0x20 [ 927.518021] bus_add_driver+0x1f4/0x270 [ 927.518028] ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio] [ 927.518031] driver_register+0x60/0xe0 [ 927.518038] ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio] [ 927.518041] sdio_register_driver+0x20/0x30 [ 927.518047] rsi_module_init+0x16/0x40 [rsi_sdio] Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-11 14:43:31 +08:00
goto fail;
}
} else {
write_addr = PING_BUFFER_ADDRESS >> 16;
status = hif_ops->master_access_msword(adapter, write_addr);
if (status < 0) {
rsi_dbg(ERR_ZONE,
"%s: Unable to set ms word to common reg\n",
__func__);
rsi: fix nommu_map_sg overflow kernel panic Following overflow kernel panic is observed on some platforms while loading the driver. It is fixed if dynamically allocated memory is passed to SDIO instead of static one [ 927.513963] nommu_map_sg: overflow 17d54064ba7c+20 of device mask ffffffff [ 927.517712] Modules linked in: rsi_sdio(+) cmac bnep arc4 rsi_91x mac80211 cfg80211 btrsi rfcomm bluetooth ecdh_generic snd_soc_sst_bytcr_rt5660 [ 927.517861] CPU: 0 PID: 1624 Comm: insmod Tainted: G W 4.15.0-1000 #1 [ 927.517870] RIP: 0010:sdhci_send_command+0x5f0/0xa90 [sdhci] [ 927.517873] RSP: 0000:ffffac3fc064b6d8 EFLAGS: 00010086 [ 927.517895] Call Trace: [ 927.517908] ? __schedule+0x3cd/0x890 [ 927.517915] ? mod_timer+0x17b/0x3c0 [ 927.517922] sdhci_request+0x7c/0xf0 [sdhci] [ 927.517928] __mmc_start_request+0x5a/0x170 [ 927.517932] mmc_start_request+0x74/0x90 [ 927.517936] mmc_wait_for_req+0x87/0xe0 [ 927.517940] mmc_io_rw_extended+0x2fd/0x330 [ 927.517946] ? mmc_wait_data_done+0x30/0x30 [ 927.517951] sdio_io_rw_ext_helper+0x160/0x210 [ 927.517956] sdio_writesb+0x1d/0x20 [ 927.517966] rsi_sdio_write_register_multiple+0x68/0x110 [rsi_sdio] [ 927.517976] rsi_hal_device_init+0x357/0x910 [rsi_91x] [ 927.517983] ? rsi_hal_device_init+0x357/0x910 [rsi_91x] [ 927.517990] rsi_probe+0x2c6/0x450 [rsi_sdio] [ 927.517995] sdio_bus_probe+0xfc/0x110 [ 927.518000] driver_probe_device+0x2b3/0x490 [ 927.518005] __driver_attach+0xdf/0xf0 [ 927.518008] ? driver_probe_device+0x490/0x490 [ 927.518014] bus_for_each_dev+0x6c/0xc0 [ 927.518018] driver_attach+0x1e/0x20 [ 927.518021] bus_add_driver+0x1f4/0x270 [ 927.518028] ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio] [ 927.518031] driver_register+0x60/0xe0 [ 927.518038] ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio] [ 927.518041] sdio_register_driver+0x20/0x30 [ 927.518047] rsi_module_init+0x16/0x40 [rsi_sdio] Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-11 14:43:31 +08:00
goto fail;
}
write_addr = RSI_SD_REQUEST_MASTER |
(PING_BUFFER_ADDRESS & 0xFFFF);
status = hif_ops->write_reg_multiple(adapter, write_addr,
rsi: fix nommu_map_sg overflow kernel panic Following overflow kernel panic is observed on some platforms while loading the driver. It is fixed if dynamically allocated memory is passed to SDIO instead of static one [ 927.513963] nommu_map_sg: overflow 17d54064ba7c+20 of device mask ffffffff [ 927.517712] Modules linked in: rsi_sdio(+) cmac bnep arc4 rsi_91x mac80211 cfg80211 btrsi rfcomm bluetooth ecdh_generic snd_soc_sst_bytcr_rt5660 [ 927.517861] CPU: 0 PID: 1624 Comm: insmod Tainted: G W 4.15.0-1000 #1 [ 927.517870] RIP: 0010:sdhci_send_command+0x5f0/0xa90 [sdhci] [ 927.517873] RSP: 0000:ffffac3fc064b6d8 EFLAGS: 00010086 [ 927.517895] Call Trace: [ 927.517908] ? __schedule+0x3cd/0x890 [ 927.517915] ? mod_timer+0x17b/0x3c0 [ 927.517922] sdhci_request+0x7c/0xf0 [sdhci] [ 927.517928] __mmc_start_request+0x5a/0x170 [ 927.517932] mmc_start_request+0x74/0x90 [ 927.517936] mmc_wait_for_req+0x87/0xe0 [ 927.517940] mmc_io_rw_extended+0x2fd/0x330 [ 927.517946] ? mmc_wait_data_done+0x30/0x30 [ 927.517951] sdio_io_rw_ext_helper+0x160/0x210 [ 927.517956] sdio_writesb+0x1d/0x20 [ 927.517966] rsi_sdio_write_register_multiple+0x68/0x110 [rsi_sdio] [ 927.517976] rsi_hal_device_init+0x357/0x910 [rsi_91x] [ 927.517983] ? rsi_hal_device_init+0x357/0x910 [rsi_91x] [ 927.517990] rsi_probe+0x2c6/0x450 [rsi_sdio] [ 927.517995] sdio_bus_probe+0xfc/0x110 [ 927.518000] driver_probe_device+0x2b3/0x490 [ 927.518005] __driver_attach+0xdf/0xf0 [ 927.518008] ? driver_probe_device+0x490/0x490 [ 927.518014] bus_for_each_dev+0x6c/0xc0 [ 927.518018] driver_attach+0x1e/0x20 [ 927.518021] bus_add_driver+0x1f4/0x270 [ 927.518028] ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio] [ 927.518031] driver_register+0x60/0xe0 [ 927.518038] ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio] [ 927.518041] sdio_register_driver+0x20/0x30 [ 927.518047] rsi_module_init+0x16/0x40 [rsi_sdio] Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-11 14:43:31 +08:00
(u8 *)bl_hdr, write_len);
if (status < 0) {
rsi_dbg(ERR_ZONE,
"%s: Failed to load Version/CRC structure\n",
__func__);
rsi: fix nommu_map_sg overflow kernel panic Following overflow kernel panic is observed on some platforms while loading the driver. It is fixed if dynamically allocated memory is passed to SDIO instead of static one [ 927.513963] nommu_map_sg: overflow 17d54064ba7c+20 of device mask ffffffff [ 927.517712] Modules linked in: rsi_sdio(+) cmac bnep arc4 rsi_91x mac80211 cfg80211 btrsi rfcomm bluetooth ecdh_generic snd_soc_sst_bytcr_rt5660 [ 927.517861] CPU: 0 PID: 1624 Comm: insmod Tainted: G W 4.15.0-1000 #1 [ 927.517870] RIP: 0010:sdhci_send_command+0x5f0/0xa90 [sdhci] [ 927.517873] RSP: 0000:ffffac3fc064b6d8 EFLAGS: 00010086 [ 927.517895] Call Trace: [ 927.517908] ? __schedule+0x3cd/0x890 [ 927.517915] ? mod_timer+0x17b/0x3c0 [ 927.517922] sdhci_request+0x7c/0xf0 [sdhci] [ 927.517928] __mmc_start_request+0x5a/0x170 [ 927.517932] mmc_start_request+0x74/0x90 [ 927.517936] mmc_wait_for_req+0x87/0xe0 [ 927.517940] mmc_io_rw_extended+0x2fd/0x330 [ 927.517946] ? mmc_wait_data_done+0x30/0x30 [ 927.517951] sdio_io_rw_ext_helper+0x160/0x210 [ 927.517956] sdio_writesb+0x1d/0x20 [ 927.517966] rsi_sdio_write_register_multiple+0x68/0x110 [rsi_sdio] [ 927.517976] rsi_hal_device_init+0x357/0x910 [rsi_91x] [ 927.517983] ? rsi_hal_device_init+0x357/0x910 [rsi_91x] [ 927.517990] rsi_probe+0x2c6/0x450 [rsi_sdio] [ 927.517995] sdio_bus_probe+0xfc/0x110 [ 927.518000] driver_probe_device+0x2b3/0x490 [ 927.518005] __driver_attach+0xdf/0xf0 [ 927.518008] ? driver_probe_device+0x490/0x490 [ 927.518014] bus_for_each_dev+0x6c/0xc0 [ 927.518018] driver_attach+0x1e/0x20 [ 927.518021] bus_add_driver+0x1f4/0x270 [ 927.518028] ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio] [ 927.518031] driver_register+0x60/0xe0 [ 927.518038] ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio] [ 927.518041] sdio_register_driver+0x20/0x30 [ 927.518047] rsi_module_init+0x16/0x40 [rsi_sdio] Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-11 14:43:31 +08:00
goto fail;
}
}
rsi: fix nommu_map_sg overflow kernel panic Following overflow kernel panic is observed on some platforms while loading the driver. It is fixed if dynamically allocated memory is passed to SDIO instead of static one [ 927.513963] nommu_map_sg: overflow 17d54064ba7c+20 of device mask ffffffff [ 927.517712] Modules linked in: rsi_sdio(+) cmac bnep arc4 rsi_91x mac80211 cfg80211 btrsi rfcomm bluetooth ecdh_generic snd_soc_sst_bytcr_rt5660 [ 927.517861] CPU: 0 PID: 1624 Comm: insmod Tainted: G W 4.15.0-1000 #1 [ 927.517870] RIP: 0010:sdhci_send_command+0x5f0/0xa90 [sdhci] [ 927.517873] RSP: 0000:ffffac3fc064b6d8 EFLAGS: 00010086 [ 927.517895] Call Trace: [ 927.517908] ? __schedule+0x3cd/0x890 [ 927.517915] ? mod_timer+0x17b/0x3c0 [ 927.517922] sdhci_request+0x7c/0xf0 [sdhci] [ 927.517928] __mmc_start_request+0x5a/0x170 [ 927.517932] mmc_start_request+0x74/0x90 [ 927.517936] mmc_wait_for_req+0x87/0xe0 [ 927.517940] mmc_io_rw_extended+0x2fd/0x330 [ 927.517946] ? mmc_wait_data_done+0x30/0x30 [ 927.517951] sdio_io_rw_ext_helper+0x160/0x210 [ 927.517956] sdio_writesb+0x1d/0x20 [ 927.517966] rsi_sdio_write_register_multiple+0x68/0x110 [rsi_sdio] [ 927.517976] rsi_hal_device_init+0x357/0x910 [rsi_91x] [ 927.517983] ? rsi_hal_device_init+0x357/0x910 [rsi_91x] [ 927.517990] rsi_probe+0x2c6/0x450 [rsi_sdio] [ 927.517995] sdio_bus_probe+0xfc/0x110 [ 927.518000] driver_probe_device+0x2b3/0x490 [ 927.518005] __driver_attach+0xdf/0xf0 [ 927.518008] ? driver_probe_device+0x490/0x490 [ 927.518014] bus_for_each_dev+0x6c/0xc0 [ 927.518018] driver_attach+0x1e/0x20 [ 927.518021] bus_add_driver+0x1f4/0x270 [ 927.518028] ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio] [ 927.518031] driver_register+0x60/0xe0 [ 927.518038] ? rsi_sdio_ack_intr+0x50/0x50 [rsi_sdio] [ 927.518041] sdio_register_driver+0x20/0x30 [ 927.518047] rsi_module_init+0x16/0x40 [rsi_sdio] Signed-off-by: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Signed-off-by: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-04-11 14:43:31 +08:00
status = 0;
fail:
kfree(bl_hdr);
return status;
}
static u32 read_flash_capacity(struct rsi_hw *adapter)
{
u32 flash_sz = 0;
if ((adapter->host_intf_ops->master_reg_read(adapter, FLASH_SIZE_ADDR,
&flash_sz, 2)) < 0) {
rsi_dbg(ERR_ZONE,
"%s: Flash size reading failed..\n",
__func__);
return 0;
}
rsi_dbg(INIT_ZONE, "Flash capacity: %d KiloBytes\n", flash_sz);
return (flash_sz * 1024); /* Return size in kbytes */
}
static int ping_pong_write(struct rsi_hw *adapter, u8 cmd, u8 *addr, u32 size)
{
struct rsi_host_intf_ops *hif_ops = adapter->host_intf_ops;
u32 block_size = adapter->block_size;
u32 cmd_addr;
u16 cmd_resp, cmd_req;
u8 *str;
int status;
if (cmd == PING_WRITE) {
cmd_addr = PING_BUFFER_ADDRESS;
cmd_resp = PONG_AVAIL;
cmd_req = PING_VALID;
str = "PING_VALID";
} else {
cmd_addr = PONG_BUFFER_ADDRESS;
cmd_resp = PING_AVAIL;
cmd_req = PONG_VALID;
str = "PONG_VALID";
}
status = hif_ops->load_data_master_write(adapter, cmd_addr, size,
block_size, addr);
if (status) {
rsi_dbg(ERR_ZONE, "%s: Unable to write blk at addr %0x\n",
__func__, *addr);
return status;
}
status = bl_cmd(adapter, cmd_req, cmd_resp, str);
if (status) {
bl_stop_cmd_timer(adapter);
return status;
}
return 0;
}
static int auto_fw_upgrade(struct rsi_hw *adapter, u8 *flash_content,
u32 content_size)
{
u8 cmd;
u32 temp_content_size, num_flash, index;
u32 flash_start_address;
int status;
if (content_size > MAX_FLASH_FILE_SIZE) {
rsi_dbg(ERR_ZONE,
"%s: Flash Content size is more than 400K %u\n",
__func__, MAX_FLASH_FILE_SIZE);
return -EINVAL;
}
flash_start_address = *(u32 *)&flash_content[FLASH_START_ADDRESS];
rsi_dbg(INFO_ZONE, "flash start address: %08x\n", flash_start_address);
if (flash_start_address < FW_IMAGE_MIN_ADDRESS) {
rsi_dbg(ERR_ZONE,
"%s: Fw image Flash Start Address is less than 64K\n",
__func__);
return -EINVAL;
}
if (flash_start_address % FLASH_SECTOR_SIZE) {
rsi_dbg(ERR_ZONE,
"%s: Flash Start Address is not multiple of 4K\n",
__func__);
return -EINVAL;
}
if ((flash_start_address + content_size) > adapter->flash_capacity) {
rsi_dbg(ERR_ZONE,
"%s: Flash Content will cross max flash size\n",
__func__);
return -EINVAL;
}
temp_content_size = content_size;
num_flash = content_size / FLASH_WRITE_CHUNK_SIZE;
rsi_dbg(INFO_ZONE, "content_size: %d, num_flash: %d\n",
content_size, num_flash);
for (index = 0; index <= num_flash; index++) {
rsi_dbg(INFO_ZONE, "flash index: %d\n", index);
if (index != num_flash) {
content_size = FLASH_WRITE_CHUNK_SIZE;
rsi_dbg(INFO_ZONE, "QSPI content_size:%d\n",
content_size);
} else {
content_size =
temp_content_size % FLASH_WRITE_CHUNK_SIZE;
rsi_dbg(INFO_ZONE,
"Writing last sector content_size:%d\n",
content_size);
if (!content_size) {
rsi_dbg(INFO_ZONE, "instruction size zero\n");
break;
}
}
if (index % 2)
cmd = PING_WRITE;
else
cmd = PONG_WRITE;
status = ping_pong_write(adapter, cmd, flash_content,
content_size);
if (status) {
rsi_dbg(ERR_ZONE, "%s: Unable to load %d block\n",
__func__, index);
return status;
}
rsi_dbg(INFO_ZONE,
"%s: Successfully loaded %d instructions\n",
__func__, index);
flash_content += content_size;
}
status = bl_cmd(adapter, EOF_REACHED, FW_LOADING_SUCCESSFUL,
"EOF_REACHED");
if (status) {
bl_stop_cmd_timer(adapter);
return status;
}
rsi_dbg(INFO_ZONE, "FW loading is done and FW is running..\n");
return 0;
}
static int rsi_hal_prepare_fwload(struct rsi_hw *adapter)
{
struct rsi_host_intf_ops *hif_ops = adapter->host_intf_ops;
u32 regout_val = 0;
int status;
bl_start_cmd_timer(adapter, BL_CMD_TIMEOUT);
while (!adapter->blcmd_timer_expired) {
status = hif_ops->master_reg_read(adapter, SWBL_REGOUT,
&regout_val,
RSI_COMMON_REG_SIZE);
if (status < 0) {
rsi_dbg(ERR_ZONE,
"%s: REGOUT read failed\n", __func__);
return status;
}
mdelay(1);
if ((regout_val >> 8) == REGOUT_VALID)
break;
}
if (adapter->blcmd_timer_expired) {
rsi_dbg(ERR_ZONE, "%s: REGOUT read timedout\n", __func__);
rsi_dbg(ERR_ZONE,
"%s: Soft boot loader not present\n", __func__);
return -ETIMEDOUT;
}
bl_stop_cmd_timer(adapter);
rsi_dbg(INFO_ZONE, "Received Board Version Number: %x\n",
(regout_val & 0xff));
status = hif_ops->master_reg_write(adapter, SWBL_REGOUT,
(REGOUT_INVALID |
REGOUT_INVALID << 8),
RSI_COMMON_REG_SIZE);
if (status < 0)
rsi_dbg(ERR_ZONE, "%s: REGOUT writing failed..\n", __func__);
else
rsi_dbg(INFO_ZONE,
"===> Device is ready to load firmware <===\n");
return status;
}
static int rsi_load_9113_firmware(struct rsi_hw *adapter)
{
struct rsi_common *common = adapter->priv;
const struct firmware *fw_entry = NULL;
u32 content_size;
u16 tmp_regout_val = 0;
struct ta_metadata *metadata_p;
int status;
status = bl_cmd(adapter, CONFIG_AUTO_READ_MODE, CMD_PASS,
"AUTO_READ_CMD");
if (status < 0)
return status;
adapter->flash_capacity = read_flash_capacity(adapter);
if (adapter->flash_capacity <= 0) {
rsi_dbg(ERR_ZONE,
"%s: Unable to read flash size from EEPROM\n",
__func__);
return -EINVAL;
}
metadata_p = &metadata_flash_content[adapter->priv->coex_mode];
rsi_dbg(INIT_ZONE, "%s: Loading file %s\n", __func__, metadata_p->name);
adapter->fw_file_name = metadata_p->name;
status = request_firmware(&fw_entry, metadata_p->name, adapter->device);
if (status < 0) {
rsi_dbg(ERR_ZONE, "%s: Failed to open file %s\n",
__func__, metadata_p->name);
return status;
}
content_size = fw_entry->size;
rsi_dbg(INFO_ZONE, "FW Length = %d bytes\n", content_size);
/* Get the firmware version */
common->lmac_ver.ver.info.fw_ver[0] =
fw_entry->data[LMAC_VER_OFFSET_9113] & 0xFF;
common->lmac_ver.ver.info.fw_ver[1] =
fw_entry->data[LMAC_VER_OFFSET_9113 + 1] & 0xFF;
common->lmac_ver.major =
fw_entry->data[LMAC_VER_OFFSET_9113 + 2] & 0xFF;
common->lmac_ver.release_num =
fw_entry->data[LMAC_VER_OFFSET_9113 + 3] & 0xFF;
common->lmac_ver.minor =
fw_entry->data[LMAC_VER_OFFSET_9113 + 4] & 0xFF;
common->lmac_ver.patch_num = 0;
rsi_print_version(common);
status = bl_write_header(adapter, (u8 *)fw_entry->data, content_size);
if (status) {
rsi_dbg(ERR_ZONE,
"%s: RPS Image header loading failed\n",
__func__);
goto fail;
}
bl_start_cmd_timer(adapter, BL_CMD_TIMEOUT);
status = bl_write_cmd(adapter, CHECK_CRC, CMD_PASS, &tmp_regout_val);
if (status) {
bl_stop_cmd_timer(adapter);
rsi_dbg(ERR_ZONE,
"%s: CHECK_CRC Command writing failed..\n",
__func__);
if ((tmp_regout_val & 0xff) == CMD_FAIL) {
rsi_dbg(ERR_ZONE,
"CRC Fail.. Proceeding to Upgrade mode\n");
goto fw_upgrade;
}
}
bl_stop_cmd_timer(adapter);
status = bl_cmd(adapter, POLLING_MODE, CMD_PASS, "POLLING_MODE");
if (status)
goto fail;
load_image_cmd:
status = bl_cmd(adapter, LOAD_HOSTED_FW, LOADING_INITIATED,
"LOAD_HOSTED_FW");
if (status)
goto fail;
rsi_dbg(INFO_ZONE, "Load Image command passed..\n");
goto success;
fw_upgrade:
status = bl_cmd(adapter, BURN_HOSTED_FW, SEND_RPS_FILE, "FW_UPGRADE");
if (status)
goto fail;
rsi_dbg(INFO_ZONE, "Burn Command Pass.. Upgrading the firmware\n");
status = auto_fw_upgrade(adapter, (u8 *)fw_entry->data, content_size);
if (status == 0) {
rsi_dbg(ERR_ZONE, "Firmware upgradation Done\n");
goto load_image_cmd;
}
rsi_dbg(ERR_ZONE, "Firmware upgrade failed\n");
status = bl_cmd(adapter, CONFIG_AUTO_READ_MODE, CMD_PASS,
"AUTO_READ_MODE");
if (status)
goto fail;
success:
rsi_dbg(ERR_ZONE, "***** Firmware Loading successful *****\n");
release_firmware(fw_entry);
return 0;
fail:
rsi_dbg(ERR_ZONE, "##### Firmware loading failed #####\n");
release_firmware(fw_entry);
return status;
}
static int rsi_load_9116_firmware(struct rsi_hw *adapter)
{
struct rsi_common *common = adapter->priv;
struct rsi_host_intf_ops *hif_ops = adapter->host_intf_ops;
const struct firmware *fw_entry;
struct ta_metadata *metadata_p;
u8 *ta_firmware, *fw_p;
struct bootload_ds bootload_ds;
u32 instructions_sz, base_address;
u16 block_size = adapter->block_size;
u32 dest, len;
int status, cnt;
rsi_dbg(INIT_ZONE, "***** Load 9116 TA Instructions *****\n");
if (adapter->rsi_host_intf == RSI_HOST_INTF_USB) {
status = bl_cmd(adapter, POLLING_MODE, CMD_PASS,
"POLLING_MODE");
if (status < 0)
return status;
}
status = hif_ops->master_reg_write(adapter, MEM_ACCESS_CTRL_FROM_HOST,
RAM_384K_ACCESS_FROM_TA,
RSI_9116_REG_SIZE);
if (status < 0) {
rsi_dbg(ERR_ZONE, "%s: Unable to access full RAM memory\n",
__func__);
return status;
}
metadata_p = &metadata[adapter->priv->coex_mode];
rsi_dbg(INIT_ZONE, "%s: loading file %s\n", __func__, metadata_p->name);
status = request_firmware(&fw_entry, metadata_p->name, adapter->device);
if (status < 0) {
rsi_dbg(ERR_ZONE, "%s: Failed to open file %s\n",
__func__, metadata_p->name);
return status;
}
ta_firmware = kmemdup(fw_entry->data, fw_entry->size, GFP_KERNEL);
if (!ta_firmware)
goto fail_release_fw;
fw_p = ta_firmware;
instructions_sz = fw_entry->size;
rsi_dbg(INFO_ZONE, "FW Length = %d bytes\n", instructions_sz);
common->lmac_ver.major = ta_firmware[LMAC_VER_OFFSET_9116];
common->lmac_ver.minor = ta_firmware[LMAC_VER_OFFSET_9116 + 1];
common->lmac_ver.release_num = ta_firmware[LMAC_VER_OFFSET_9116 + 2];
common->lmac_ver.patch_num = ta_firmware[LMAC_VER_OFFSET_9116 + 3];
common->lmac_ver.ver.info.fw_ver[0] =
ta_firmware[LMAC_VER_OFFSET_9116 + 4];
if (instructions_sz % FW_ALIGN_SIZE)
instructions_sz +=
(FW_ALIGN_SIZE - (instructions_sz % FW_ALIGN_SIZE));
rsi_dbg(INFO_ZONE, "instructions_sz : %d\n", instructions_sz);
if (*(u16 *)fw_p == RSI_9116_FW_MAGIC_WORD) {
memcpy(&bootload_ds, fw_p, sizeof(struct bootload_ds));
fw_p += le16_to_cpu(bootload_ds.offset);
rsi_dbg(INFO_ZONE, "FW start = %x\n", *(u32 *)fw_p);
cnt = 0;
do {
rsi_dbg(ERR_ZONE, "%s: Loading chunk %d\n",
__func__, cnt);
dest = le32_to_cpu(bootload_ds.bl_entry[cnt].dst_addr);
len = le32_to_cpu(bootload_ds.bl_entry[cnt].control) &
RSI_BL_CTRL_LEN_MASK;
rsi_dbg(INFO_ZONE, "length %d destination %x\n",
len, dest);
status = hif_ops->load_data_master_write(adapter, dest,
len,
block_size,
fw_p);
if (status < 0) {
rsi_dbg(ERR_ZONE,
"Failed to load chunk %d\n", cnt);
break;
}
fw_p += len;
if (le32_to_cpu(bootload_ds.bl_entry[cnt].control) &
RSI_BL_CTRL_LAST_ENTRY)
break;
cnt++;
} while (1);
} else {
base_address = metadata_p->address;
status = hif_ops->load_data_master_write(adapter,
base_address,
instructions_sz,
block_size,
ta_firmware);
}
if (status) {
rsi_dbg(ERR_ZONE,
"%s: Unable to load %s blk\n",
__func__, metadata_p->name);
goto fail_free_fw;
}
rsi_dbg(INIT_ZONE, "%s: Successfully loaded %s instructions\n",
__func__, metadata_p->name);
if (adapter->rsi_host_intf == RSI_HOST_INTF_SDIO) {
if (hif_ops->ta_reset(adapter))
rsi_dbg(ERR_ZONE, "Unable to put ta in reset\n");
} else {
if (bl_cmd(adapter, JUMP_TO_ZERO_PC,
CMD_PASS, "JUMP_TO_ZERO") < 0)
rsi_dbg(INFO_ZONE, "Jump to zero command failed\n");
else
rsi_dbg(INFO_ZONE, "Jump to zero command successful\n");
}
fail_free_fw:
kfree(ta_firmware);
fail_release_fw:
release_firmware(fw_entry);
return status;
}
int rsi_hal_device_init(struct rsi_hw *adapter)
{
struct rsi_common *common = adapter->priv;
int status;
switch (adapter->device_model) {
case RSI_DEV_9113:
status = rsi_hal_prepare_fwload(adapter);
if (status < 0)
return status;
if (rsi_load_9113_firmware(adapter)) {
rsi_dbg(ERR_ZONE,
"%s: Failed to load TA instructions\n",
__func__);
return -EINVAL;
}
break;
case RSI_DEV_9116:
status = rsi_hal_prepare_fwload(adapter);
if (status < 0)
return status;
if (rsi_load_9116_firmware(adapter)) {
rsi_dbg(ERR_ZONE,
"%s: Failed to load firmware to 9116 device\n",
__func__);
return -EINVAL;
}
break;
default:
return -EINVAL;
}
common->fsm_state = FSM_CARD_NOT_READY;
return 0;
}
EXPORT_SYMBOL_GPL(rsi_hal_device_init);