OpenCloudOS-Kernel/lib/asn1_decoder.c

515 lines
13 KiB
C
Raw Normal View History

/* Decoder for ASN.1 BER/DER/CER encoded bytestream
*
* Copyright (C) 2012 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public Licence
* as published by the Free Software Foundation; either version
* 2 of the Licence, or (at your option) any later version.
*/
#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/asn1_decoder.h>
#include <linux/asn1_ber_bytecode.h>
static const unsigned char asn1_op_lengths[ASN1_OP__NR] = {
/* OPC TAG JMP ACT */
[ASN1_OP_MATCH] = 1 + 1,
[ASN1_OP_MATCH_OR_SKIP] = 1 + 1,
[ASN1_OP_MATCH_ACT] = 1 + 1 + 1,
[ASN1_OP_MATCH_ACT_OR_SKIP] = 1 + 1 + 1,
[ASN1_OP_MATCH_JUMP] = 1 + 1 + 1,
[ASN1_OP_MATCH_JUMP_OR_SKIP] = 1 + 1 + 1,
[ASN1_OP_MATCH_ANY] = 1,
[ASN1_OP_MATCH_ANY_OR_SKIP] = 1,
[ASN1_OP_MATCH_ANY_ACT] = 1 + 1,
[ASN1_OP_MATCH_ANY_ACT_OR_SKIP] = 1 + 1,
[ASN1_OP_COND_MATCH_OR_SKIP] = 1 + 1,
[ASN1_OP_COND_MATCH_ACT_OR_SKIP] = 1 + 1 + 1,
[ASN1_OP_COND_MATCH_JUMP_OR_SKIP] = 1 + 1 + 1,
[ASN1_OP_COND_MATCH_ANY] = 1,
[ASN1_OP_COND_MATCH_ANY_OR_SKIP] = 1,
[ASN1_OP_COND_MATCH_ANY_ACT] = 1 + 1,
[ASN1_OP_COND_MATCH_ANY_ACT_OR_SKIP] = 1 + 1,
[ASN1_OP_COND_FAIL] = 1,
[ASN1_OP_COMPLETE] = 1,
[ASN1_OP_ACT] = 1 + 1,
ASN.1: Fix actions on CHOICE elements with IMPLICIT tags In an ASN.1 description where there is a CHOICE construct that contains elements with IMPLICIT tags that refer to constructed types, actions to be taken on those elements should be conditional on the corresponding element actually being matched. Currently, however, such actions are performed unconditionally in the middle of processing the CHOICE. For example, look at elements 'b' and 'e' here: A ::= SEQUENCE { CHOICE { b [0] IMPLICIT B ({ do_XXXXXXXXXXXX_b }), c [1] EXPLICIT C ({ do_XXXXXXXXXXXX_c }), d [2] EXPLICIT B ({ do_XXXXXXXXXXXX_d }), e [3] IMPLICIT C ({ do_XXXXXXXXXXXX_e }), f [4] IMPLICIT INTEGER ({ do_XXXXXXXXXXXX_f }) } } ({ do_XXXXXXXXXXXX_A }) B ::= SET OF OBJECT IDENTIFIER ({ do_XXXXXXXXXXXX_oid }) C ::= SET OF INTEGER ({ do_XXXXXXXXXXXX_int }) They each have an action (do_XXXXXXXXXXXX_b and do_XXXXXXXXXXXX_e) that should only be processed if that element is matched. The problem is that there's no easy place to hang the action off in the subclause (type B for element 'b' and type C for element 'e') because subclause opcode sequences can be shared. To fix this, introduce a conditional action opcode(ASN1_OP_MAYBE_ACT) that the decoder only processes if the preceding match was successful. This can be seen in an excerpt from the output of the fixed ASN.1 compiler for the above ASN.1 description: [ 13] = ASN1_OP_COND_MATCH_JUMP_OR_SKIP, // e [ 14] = _tagn(CONT, CONS, 3), [ 15] = _jump_target(45), // --> C [ 16] = ASN1_OP_MAYBE_ACT, [ 17] = _action(ACT_do_XXXXXXXXXXXX_e), In this, if the op at [13] is matched (ie. element 'e' above) then the action at [16] will be performed. However, if the op at [13] doesn't match or is skipped because it is conditional and some previous op matched, then the action at [16] will be ignored. Note that to make this work in the decoder, the ASN1_OP_RETURN op must set the flag to indicate that a match happened. This is necessary because the _jump_target() seen above introduces a subclause (in this case an object of type 'C') which is likely to alter the flag. Setting the flag here is okay because to process a subclause, a match must have happened and caused a jump. This cannot be tested with the code as it stands, but rather affects future code. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
2015-08-05 19:54:46 +08:00
[ASN1_OP_MAYBE_ACT] = 1 + 1,
[ASN1_OP_RETURN] = 1,
[ASN1_OP_END_SEQ] = 1,
[ASN1_OP_END_SEQ_OF] = 1 + 1,
[ASN1_OP_END_SET] = 1,
[ASN1_OP_END_SET_OF] = 1 + 1,
[ASN1_OP_END_SEQ_ACT] = 1 + 1,
[ASN1_OP_END_SEQ_OF_ACT] = 1 + 1 + 1,
[ASN1_OP_END_SET_ACT] = 1 + 1,
[ASN1_OP_END_SET_OF_ACT] = 1 + 1 + 1,
};
/*
* Find the length of an indefinite length object
* @data: The data buffer
* @datalen: The end of the innermost containing element in the buffer
* @_dp: The data parse cursor (updated before returning)
* @_len: Where to return the size of the element.
* @_errmsg: Where to return a pointer to an error message on error
*/
static int asn1_find_indefinite_length(const unsigned char *data, size_t datalen,
size_t *_dp, size_t *_len,
const char **_errmsg)
{
unsigned char tag, tmp;
size_t dp = *_dp, len, n;
int indef_level = 1;
next_tag:
if (unlikely(datalen - dp < 2)) {
if (datalen == dp)
goto missing_eoc;
goto data_overrun_error;
}
/* Extract a tag from the data */
tag = data[dp++];
if (tag == ASN1_EOC) {
/* It appears to be an EOC. */
if (data[dp++] != 0)
goto invalid_eoc;
if (--indef_level <= 0) {
*_len = dp - *_dp;
*_dp = dp;
return 0;
}
goto next_tag;
}
if (unlikely((tag & 0x1f) == ASN1_LONG_TAG)) {
do {
if (unlikely(datalen - dp < 2))
goto data_overrun_error;
tmp = data[dp++];
} while (tmp & 0x80);
}
/* Extract the length */
len = data[dp++];
if (len <= 0x7f)
goto check_length;
if (unlikely(len == ASN1_INDEFINITE_LENGTH)) {
/* Indefinite length */
if (unlikely((tag & ASN1_CONS_BIT) == ASN1_PRIM << 5))
goto indefinite_len_primitive;
indef_level++;
goto next_tag;
}
n = len - 0x80;
if (unlikely(n > sizeof(len) - 1))
goto length_too_long;
if (unlikely(n > datalen - dp))
goto data_overrun_error;
len = 0;
for (; n > 0; n--) {
len <<= 8;
len |= data[dp++];
}
check_length:
if (len > datalen - dp)
goto data_overrun_error;
dp += len;
goto next_tag;
length_too_long:
*_errmsg = "Unsupported length";
goto error;
indefinite_len_primitive:
*_errmsg = "Indefinite len primitive not permitted";
goto error;
invalid_eoc:
*_errmsg = "Invalid length EOC";
goto error;
data_overrun_error:
*_errmsg = "Data overrun error";
goto error;
missing_eoc:
*_errmsg = "Missing EOC in indefinite len cons";
error:
*_dp = dp;
return -1;
}
/**
* asn1_ber_decoder - Decoder BER/DER/CER ASN.1 according to pattern
* @decoder: The decoder definition (produced by asn1_compiler)
* @context: The caller's context (to be passed to the action functions)
* @data: The encoded data
* @datalen: The size of the encoded data
*
* Decode BER/DER/CER encoded ASN.1 data according to a bytecode pattern
* produced by asn1_compiler. Action functions are called on marked tags to
* allow the caller to retrieve significant data.
*
* LIMITATIONS:
*
* To keep down the amount of stack used by this function, the following limits
* have been imposed:
*
* (1) This won't handle datalen > 65535 without increasing the size of the
* cons stack elements and length_too_long checking.
*
* (2) The stack of constructed types is 10 deep. If the depth of non-leaf
* constructed types exceeds this, the decode will fail.
*
* (3) The SET type (not the SET OF type) isn't really supported as tracking
* what members of the set have been seen is a pain.
*/
int asn1_ber_decoder(const struct asn1_decoder *decoder,
void *context,
const unsigned char *data,
size_t datalen)
{
const unsigned char *machine = decoder->machine;
const asn1_action_t *actions = decoder->actions;
size_t machlen = decoder->machlen;
enum asn1_opcode op;
unsigned char tag = 0, csp = 0, jsp = 0, optag = 0, hdr = 0;
const char *errmsg;
size_t pc = 0, dp = 0, tdp = 0, len = 0;
int ret;
unsigned char flags = 0;
#define FLAG_INDEFINITE_LENGTH 0x01
#define FLAG_MATCHED 0x02
ASN.1: Fix actions on CHOICE elements with IMPLICIT tags In an ASN.1 description where there is a CHOICE construct that contains elements with IMPLICIT tags that refer to constructed types, actions to be taken on those elements should be conditional on the corresponding element actually being matched. Currently, however, such actions are performed unconditionally in the middle of processing the CHOICE. For example, look at elements 'b' and 'e' here: A ::= SEQUENCE { CHOICE { b [0] IMPLICIT B ({ do_XXXXXXXXXXXX_b }), c [1] EXPLICIT C ({ do_XXXXXXXXXXXX_c }), d [2] EXPLICIT B ({ do_XXXXXXXXXXXX_d }), e [3] IMPLICIT C ({ do_XXXXXXXXXXXX_e }), f [4] IMPLICIT INTEGER ({ do_XXXXXXXXXXXX_f }) } } ({ do_XXXXXXXXXXXX_A }) B ::= SET OF OBJECT IDENTIFIER ({ do_XXXXXXXXXXXX_oid }) C ::= SET OF INTEGER ({ do_XXXXXXXXXXXX_int }) They each have an action (do_XXXXXXXXXXXX_b and do_XXXXXXXXXXXX_e) that should only be processed if that element is matched. The problem is that there's no easy place to hang the action off in the subclause (type B for element 'b' and type C for element 'e') because subclause opcode sequences can be shared. To fix this, introduce a conditional action opcode(ASN1_OP_MAYBE_ACT) that the decoder only processes if the preceding match was successful. This can be seen in an excerpt from the output of the fixed ASN.1 compiler for the above ASN.1 description: [ 13] = ASN1_OP_COND_MATCH_JUMP_OR_SKIP, // e [ 14] = _tagn(CONT, CONS, 3), [ 15] = _jump_target(45), // --> C [ 16] = ASN1_OP_MAYBE_ACT, [ 17] = _action(ACT_do_XXXXXXXXXXXX_e), In this, if the op at [13] is matched (ie. element 'e' above) then the action at [16] will be performed. However, if the op at [13] doesn't match or is skipped because it is conditional and some previous op matched, then the action at [16] will be ignored. Note that to make this work in the decoder, the ASN1_OP_RETURN op must set the flag to indicate that a match happened. This is necessary because the _jump_target() seen above introduces a subclause (in this case an object of type 'C') which is likely to alter the flag. Setting the flag here is okay because to process a subclause, a match must have happened and caused a jump. This cannot be tested with the code as it stands, but rather affects future code. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
2015-08-05 19:54:46 +08:00
#define FLAG_LAST_MATCHED 0x04 /* Last tag matched */
#define FLAG_CONS 0x20 /* Corresponds to CONS bit in the opcode tag
* - ie. whether or not we are going to parse
* a compound type.
*/
#define NR_CONS_STACK 10
unsigned short cons_dp_stack[NR_CONS_STACK];
unsigned short cons_datalen_stack[NR_CONS_STACK];
unsigned char cons_hdrlen_stack[NR_CONS_STACK];
#define NR_JUMP_STACK 10
unsigned char jump_stack[NR_JUMP_STACK];
if (datalen > 65535)
return -EMSGSIZE;
next_op:
pr_debug("next_op: pc=\e[32m%zu\e[m/%zu dp=\e[33m%zu\e[m/%zu C=%d J=%d\n",
pc, machlen, dp, datalen, csp, jsp);
if (unlikely(pc >= machlen))
goto machine_overrun_error;
op = machine[pc];
if (unlikely(pc + asn1_op_lengths[op] > machlen))
goto machine_overrun_error;
/* If this command is meant to match a tag, then do that before
* evaluating the command.
*/
if (op <= ASN1_OP__MATCHES_TAG) {
unsigned char tmp;
/* Skip conditional matches if possible */
ASN.1: Fix non-match detection failure on data overrun If the ASN.1 decoder is asked to parse a sequence of objects, non-optional matches get skipped if there's no more data to be had rather than a data-overrun error being reported. This is due to the code segment that decides whether to skip optional matches (ie. matches that could get ignored because an element is marked OPTIONAL in the grammar) due to a lack of data also skips non-optional elements if the data pointer has reached the end of the buffer. This can be tested with the data decoder for the new RSA akcipher algorithm that takes three non-optional integers. Currently, it skips the last integer if there is insufficient data. Without the fix, #defining DEBUG in asn1_decoder.c will show something like: next_op: pc=0/13 dp=0/270 C=0 J=0 - match? 30 30 00 - TAG: 30 266 CONS next_op: pc=2/13 dp=4/270 C=1 J=0 - match? 02 02 00 - TAG: 02 257 - LEAF: 257 next_op: pc=5/13 dp=265/270 C=1 J=0 - match? 02 02 00 - TAG: 02 3 - LEAF: 3 next_op: pc=8/13 dp=270/270 C=1 J=0 next_op: pc=11/13 dp=270/270 C=1 J=0 - end cons t=4 dp=270 l=270/270 The next_op line for pc=8/13 should be followed by a match line. This is not exploitable for X.509 certificates by means of shortening the message and fixing up the ASN.1 CONS tags because: (1) The relevant records being built up are cleared before use. (2) If the message is shortened sufficiently to remove the public key, the ASN.1 parse of the RSA key will fail quickly due to a lack of data. (3) Extracted signature data is either turned into MPIs (which cope with a 0 length) or is simpler integers specifying algoritms and suchlike (which can validly be 0); and (4) The AKID and SKID extensions are optional and their removal is handled without risking passing a NULL to asymmetric_key_generate_id(). (5) If the certificate is truncated sufficiently to remove the subject, issuer or serialNumber then the ASN.1 decoder will fail with a 'Cons stack underflow' return. This is not exploitable for PKCS#7 messages by means of removal of elements from such a message from the tail end of a sequence: (1) Any shortened X.509 certs embedded in the PKCS#7 message are survivable as detailed above. (2) The message digest content isn't used if it shows a NULL pointer, similarly, the authattrs aren't used if that shows a NULL pointer. (3) A missing signature results in a NULL MPI - which the MPI routines deal with. (4) If data is NULL, it is expected that the message has detached content and that is handled appropriately. (5) If the serialNumber is excised, the unconditional action associated with it will pick up the containing SEQUENCE instead, so no NULL pointer will be seen here. If both the issuer and the serialNumber are excised, the ASN.1 decode will fail with an 'Unexpected tag' return. In either case, there's no way to get to asymmetric_key_generate_id() with a NULL pointer. (6) Other fields are decoded to simple integers. Shortening the message to omit an algorithm ID field will cause checks on this to fail early in the verification process. This can also be tested by snipping objects off of the end of the ASN.1 stream such that mandatory tags are removed - or even from the end of internal SEQUENCEs. If any mandatory tag is missing, the error EBADMSG *should* be produced. Without this patch ERANGE or ENOPKG might be produced or the parse may apparently succeed, perhaps with ENOKEY or EKEYREJECTED being produced later, depending on what gets snipped. Just snipping off the final BIT_STRING or OCTET_STRING from either sample should be a start since both are mandatory and neither will cause an EBADMSG without the patches Reported-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Marcel Holtmann <marcel@holtmann.org> Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
2015-08-05 19:54:46 +08:00
if ((op & ASN1_OP_MATCH__COND && flags & FLAG_MATCHED) ||
(op & ASN1_OP_MATCH__SKIP && dp == datalen)) {
ASN.1: Fix actions on CHOICE elements with IMPLICIT tags In an ASN.1 description where there is a CHOICE construct that contains elements with IMPLICIT tags that refer to constructed types, actions to be taken on those elements should be conditional on the corresponding element actually being matched. Currently, however, such actions are performed unconditionally in the middle of processing the CHOICE. For example, look at elements 'b' and 'e' here: A ::= SEQUENCE { CHOICE { b [0] IMPLICIT B ({ do_XXXXXXXXXXXX_b }), c [1] EXPLICIT C ({ do_XXXXXXXXXXXX_c }), d [2] EXPLICIT B ({ do_XXXXXXXXXXXX_d }), e [3] IMPLICIT C ({ do_XXXXXXXXXXXX_e }), f [4] IMPLICIT INTEGER ({ do_XXXXXXXXXXXX_f }) } } ({ do_XXXXXXXXXXXX_A }) B ::= SET OF OBJECT IDENTIFIER ({ do_XXXXXXXXXXXX_oid }) C ::= SET OF INTEGER ({ do_XXXXXXXXXXXX_int }) They each have an action (do_XXXXXXXXXXXX_b and do_XXXXXXXXXXXX_e) that should only be processed if that element is matched. The problem is that there's no easy place to hang the action off in the subclause (type B for element 'b' and type C for element 'e') because subclause opcode sequences can be shared. To fix this, introduce a conditional action opcode(ASN1_OP_MAYBE_ACT) that the decoder only processes if the preceding match was successful. This can be seen in an excerpt from the output of the fixed ASN.1 compiler for the above ASN.1 description: [ 13] = ASN1_OP_COND_MATCH_JUMP_OR_SKIP, // e [ 14] = _tagn(CONT, CONS, 3), [ 15] = _jump_target(45), // --> C [ 16] = ASN1_OP_MAYBE_ACT, [ 17] = _action(ACT_do_XXXXXXXXXXXX_e), In this, if the op at [13] is matched (ie. element 'e' above) then the action at [16] will be performed. However, if the op at [13] doesn't match or is skipped because it is conditional and some previous op matched, then the action at [16] will be ignored. Note that to make this work in the decoder, the ASN1_OP_RETURN op must set the flag to indicate that a match happened. This is necessary because the _jump_target() seen above introduces a subclause (in this case an object of type 'C') which is likely to alter the flag. Setting the flag here is okay because to process a subclause, a match must have happened and caused a jump. This cannot be tested with the code as it stands, but rather affects future code. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
2015-08-05 19:54:46 +08:00
flags &= ~FLAG_LAST_MATCHED;
pc += asn1_op_lengths[op];
goto next_op;
}
flags = 0;
hdr = 2;
/* Extract a tag from the data */
KEYS: fix NULL pointer dereference during ASN.1 parsing [ver #2] syzkaller reported a NULL pointer dereference in asn1_ber_decoder(). It can be reproduced by the following command, assuming CONFIG_PKCS7_TEST_KEY=y: keyctl add pkcs7_test desc '' @s The bug is that if the data buffer is empty, an integer underflow occurs in the following check: if (unlikely(dp >= datalen - 1)) goto data_overrun_error; This results in the NULL data pointer being dereferenced. Fix it by checking for 'datalen - dp < 2' instead. Also fix the similar check for 'dp >= datalen - n' later in the same function. That one possibly could result in a buffer overread. The NULL pointer dereference was reproducible using the "pkcs7_test" key type but not the "asymmetric" key type because the "asymmetric" key type checks for a 0-length payload before calling into the ASN.1 decoder but the "pkcs7_test" key type does not. The bug report was: BUG: unable to handle kernel NULL pointer dereference at (null) IP: asn1_ber_decoder+0x17f/0xe60 lib/asn1_decoder.c:233 PGD 7b708067 P4D 7b708067 PUD 7b6ee067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: CPU: 0 PID: 522 Comm: syz-executor1 Not tainted 4.14.0-rc8 #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.3-20171021_125229-anatol 04/01/2014 task: ffff9b6b3798c040 task.stack: ffff9b6b37970000 RIP: 0010:asn1_ber_decoder+0x17f/0xe60 lib/asn1_decoder.c:233 RSP: 0018:ffff9b6b37973c78 EFLAGS: 00010216 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000021c RDX: ffffffff814a04ed RSI: ffffb1524066e000 RDI: ffffffff910759e0 RBP: ffff9b6b37973d60 R08: 0000000000000001 R09: ffff9b6b3caa4180 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000002 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f10ed1f2700(0000) GS:ffff9b6b3ea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000007b6f3000 CR4: 00000000000006f0 Call Trace: pkcs7_parse_message+0xee/0x240 crypto/asymmetric_keys/pkcs7_parser.c:139 verify_pkcs7_signature+0x33/0x180 certs/system_keyring.c:216 pkcs7_preparse+0x41/0x70 crypto/asymmetric_keys/pkcs7_key_type.c:63 key_create_or_update+0x180/0x530 security/keys/key.c:855 SYSC_add_key security/keys/keyctl.c:122 [inline] SyS_add_key+0xbf/0x250 security/keys/keyctl.c:62 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x4585c9 RSP: 002b:00007f10ed1f1bd8 EFLAGS: 00000216 ORIG_RAX: 00000000000000f8 RAX: ffffffffffffffda RBX: 00007f10ed1f2700 RCX: 00000000004585c9 RDX: 0000000020000000 RSI: 0000000020008ffb RDI: 0000000020008000 RBP: 0000000000000000 R08: ffffffffffffffff R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000216 R12: 00007fff1b2260ae R13: 00007fff1b2260af R14: 00007f10ed1f2700 R15: 0000000000000000 Code: dd ca ff 48 8b 45 88 48 83 e8 01 4c 39 f0 0f 86 a8 07 00 00 e8 53 dd ca ff 49 8d 46 01 48 89 85 58 ff ff ff 48 8b 85 60 ff ff ff <42> 0f b6 0c 30 89 c8 88 8d 75 ff ff ff 83 e0 1f 89 8d 28 ff ff RIP: asn1_ber_decoder+0x17f/0xe60 lib/asn1_decoder.c:233 RSP: ffff9b6b37973c78 CR2: 0000000000000000 Fixes: 42d5ec27f873 ("X.509: Add an ASN.1 decoder") Reported-by: syzbot <syzkaller@googlegroups.com> Cc: <stable@vger.kernel.org> # v3.7+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-11-08 06:29:02 +08:00
if (unlikely(datalen - dp < 2))
goto data_overrun_error;
tag = data[dp++];
if (unlikely((tag & 0x1f) == ASN1_LONG_TAG))
goto long_tag_not_supported;
if (op & ASN1_OP_MATCH__ANY) {
pr_debug("- any %02x\n", tag);
} else {
/* Extract the tag from the machine
* - Either CONS or PRIM are permitted in the data if
* CONS is not set in the op stream, otherwise CONS
* is mandatory.
*/
optag = machine[pc + 1];
flags |= optag & FLAG_CONS;
/* Determine whether the tag matched */
tmp = optag ^ tag;
tmp &= ~(optag & ASN1_CONS_BIT);
pr_debug("- match? %02x %02x %02x\n", tag, optag, tmp);
if (tmp != 0) {
/* All odd-numbered tags are MATCH_OR_SKIP. */
if (op & ASN1_OP_MATCH__SKIP) {
pc += asn1_op_lengths[op];
dp--;
goto next_op;
}
goto tag_mismatch;
}
}
flags |= FLAG_MATCHED;
len = data[dp++];
if (len > 0x7f) {
if (unlikely(len == ASN1_INDEFINITE_LENGTH)) {
/* Indefinite length */
if (unlikely(!(tag & ASN1_CONS_BIT)))
goto indefinite_len_primitive;
flags |= FLAG_INDEFINITE_LENGTH;
if (unlikely(2 > datalen - dp))
goto data_overrun_error;
} else {
int n = len - 0x80;
if (unlikely(n > 2))
goto length_too_long;
KEYS: fix NULL pointer dereference during ASN.1 parsing [ver #2] syzkaller reported a NULL pointer dereference in asn1_ber_decoder(). It can be reproduced by the following command, assuming CONFIG_PKCS7_TEST_KEY=y: keyctl add pkcs7_test desc '' @s The bug is that if the data buffer is empty, an integer underflow occurs in the following check: if (unlikely(dp >= datalen - 1)) goto data_overrun_error; This results in the NULL data pointer being dereferenced. Fix it by checking for 'datalen - dp < 2' instead. Also fix the similar check for 'dp >= datalen - n' later in the same function. That one possibly could result in a buffer overread. The NULL pointer dereference was reproducible using the "pkcs7_test" key type but not the "asymmetric" key type because the "asymmetric" key type checks for a 0-length payload before calling into the ASN.1 decoder but the "pkcs7_test" key type does not. The bug report was: BUG: unable to handle kernel NULL pointer dereference at (null) IP: asn1_ber_decoder+0x17f/0xe60 lib/asn1_decoder.c:233 PGD 7b708067 P4D 7b708067 PUD 7b6ee067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: CPU: 0 PID: 522 Comm: syz-executor1 Not tainted 4.14.0-rc8 #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.3-20171021_125229-anatol 04/01/2014 task: ffff9b6b3798c040 task.stack: ffff9b6b37970000 RIP: 0010:asn1_ber_decoder+0x17f/0xe60 lib/asn1_decoder.c:233 RSP: 0018:ffff9b6b37973c78 EFLAGS: 00010216 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000021c RDX: ffffffff814a04ed RSI: ffffb1524066e000 RDI: ffffffff910759e0 RBP: ffff9b6b37973d60 R08: 0000000000000001 R09: ffff9b6b3caa4180 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000002 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 00007f10ed1f2700(0000) GS:ffff9b6b3ea00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000007b6f3000 CR4: 00000000000006f0 Call Trace: pkcs7_parse_message+0xee/0x240 crypto/asymmetric_keys/pkcs7_parser.c:139 verify_pkcs7_signature+0x33/0x180 certs/system_keyring.c:216 pkcs7_preparse+0x41/0x70 crypto/asymmetric_keys/pkcs7_key_type.c:63 key_create_or_update+0x180/0x530 security/keys/key.c:855 SYSC_add_key security/keys/keyctl.c:122 [inline] SyS_add_key+0xbf/0x250 security/keys/keyctl.c:62 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x4585c9 RSP: 002b:00007f10ed1f1bd8 EFLAGS: 00000216 ORIG_RAX: 00000000000000f8 RAX: ffffffffffffffda RBX: 00007f10ed1f2700 RCX: 00000000004585c9 RDX: 0000000020000000 RSI: 0000000020008ffb RDI: 0000000020008000 RBP: 0000000000000000 R08: ffffffffffffffff R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000216 R12: 00007fff1b2260ae R13: 00007fff1b2260af R14: 00007f10ed1f2700 R15: 0000000000000000 Code: dd ca ff 48 8b 45 88 48 83 e8 01 4c 39 f0 0f 86 a8 07 00 00 e8 53 dd ca ff 49 8d 46 01 48 89 85 58 ff ff ff 48 8b 85 60 ff ff ff <42> 0f b6 0c 30 89 c8 88 8d 75 ff ff ff 83 e0 1f 89 8d 28 ff ff RIP: asn1_ber_decoder+0x17f/0xe60 lib/asn1_decoder.c:233 RSP: ffff9b6b37973c78 CR2: 0000000000000000 Fixes: 42d5ec27f873 ("X.509: Add an ASN.1 decoder") Reported-by: syzbot <syzkaller@googlegroups.com> Cc: <stable@vger.kernel.org> # v3.7+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-11-08 06:29:02 +08:00
if (unlikely(n > datalen - dp))
goto data_overrun_error;
hdr += n;
for (len = 0; n > 0; n--) {
len <<= 8;
len |= data[dp++];
}
if (unlikely(len > datalen - dp))
goto data_overrun_error;
}
KEYS: fix out-of-bounds read during ASN.1 parsing syzkaller with KASAN reported an out-of-bounds read in asn1_ber_decoder(). It can be reproduced by the following command, assuming CONFIG_X509_CERTIFICATE_PARSER=y and CONFIG_KASAN=y: keyctl add asymmetric desc $'\x30\x30' @s The bug is that the length of an ASN.1 data value isn't validated in the case where it is encoded using the short form, causing the decoder to read past the end of the input buffer. Fix it by validating the length. The bug report was: BUG: KASAN: slab-out-of-bounds in asn1_ber_decoder+0x10cb/0x1730 lib/asn1_decoder.c:233 Read of size 1 at addr ffff88003cccfa02 by task syz-executor0/6818 CPU: 1 PID: 6818 Comm: syz-executor0 Not tainted 4.14.0-rc7-00008-g5f479447d983 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0xb3/0x10b lib/dump_stack.c:52 print_address_description+0x79/0x2a0 mm/kasan/report.c:252 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report+0x236/0x340 mm/kasan/report.c:409 __asan_report_load1_noabort+0x14/0x20 mm/kasan/report.c:427 asn1_ber_decoder+0x10cb/0x1730 lib/asn1_decoder.c:233 x509_cert_parse+0x1db/0x650 crypto/asymmetric_keys/x509_cert_parser.c:89 x509_key_preparse+0x64/0x7a0 crypto/asymmetric_keys/x509_public_key.c:174 asymmetric_key_preparse+0xcb/0x1a0 crypto/asymmetric_keys/asymmetric_type.c:388 key_create_or_update+0x347/0xb20 security/keys/key.c:855 SYSC_add_key security/keys/keyctl.c:122 [inline] SyS_add_key+0x1cd/0x340 security/keys/keyctl.c:62 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x447c89 RSP: 002b:00007fca7a5d3bd8 EFLAGS: 00000246 ORIG_RAX: 00000000000000f8 RAX: ffffffffffffffda RBX: 00007fca7a5d46cc RCX: 0000000000447c89 RDX: 0000000020006f4a RSI: 0000000020006000 RDI: 0000000020001ff5 RBP: 0000000000000046 R08: fffffffffffffffd R09: 0000000000000000 R10: 0000000000000002 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007fca7a5d49c0 R15: 00007fca7a5d4700 Fixes: 42d5ec27f873 ("X.509: Add an ASN.1 decoder") Cc: <stable@vger.kernel.org> # v3.7+ Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
2017-11-02 08:47:19 +08:00
} else {
if (unlikely(len > datalen - dp))
goto data_overrun_error;
}
if (flags & FLAG_CONS) {
/* For expected compound forms, we stack the positions
* of the start and end of the data.
*/
if (unlikely(csp >= NR_CONS_STACK))
goto cons_stack_overflow;
cons_dp_stack[csp] = dp;
cons_hdrlen_stack[csp] = hdr;
if (!(flags & FLAG_INDEFINITE_LENGTH)) {
cons_datalen_stack[csp] = datalen;
datalen = dp + len;
} else {
cons_datalen_stack[csp] = 0;
}
csp++;
}
pr_debug("- TAG: %02x %zu%s\n",
tag, len, flags & FLAG_CONS ? " CONS" : "");
tdp = dp;
}
/* Decide how to handle the operation */
switch (op) {
case ASN1_OP_MATCH_ANY_ACT:
case ASN1_OP_MATCH_ANY_ACT_OR_SKIP:
case ASN1_OP_COND_MATCH_ANY_ACT:
case ASN1_OP_COND_MATCH_ANY_ACT_OR_SKIP:
ret = actions[machine[pc + 1]](context, hdr, tag, data + dp, len);
if (ret < 0)
return ret;
goto skip_data;
case ASN1_OP_MATCH_ACT:
case ASN1_OP_MATCH_ACT_OR_SKIP:
case ASN1_OP_COND_MATCH_ACT_OR_SKIP:
ret = actions[machine[pc + 2]](context, hdr, tag, data + dp, len);
if (ret < 0)
return ret;
goto skip_data;
case ASN1_OP_MATCH:
case ASN1_OP_MATCH_OR_SKIP:
case ASN1_OP_MATCH_ANY:
case ASN1_OP_MATCH_ANY_OR_SKIP:
case ASN1_OP_COND_MATCH_OR_SKIP:
case ASN1_OP_COND_MATCH_ANY:
case ASN1_OP_COND_MATCH_ANY_OR_SKIP:
skip_data:
if (!(flags & FLAG_CONS)) {
if (flags & FLAG_INDEFINITE_LENGTH) {
ret = asn1_find_indefinite_length(
data, datalen, &dp, &len, &errmsg);
if (ret < 0)
goto error;
} else {
dp += len;
}
pr_debug("- LEAF: %zu\n", len);
}
pc += asn1_op_lengths[op];
goto next_op;
case ASN1_OP_MATCH_JUMP:
case ASN1_OP_MATCH_JUMP_OR_SKIP:
case ASN1_OP_COND_MATCH_JUMP_OR_SKIP:
pr_debug("- MATCH_JUMP\n");
if (unlikely(jsp == NR_JUMP_STACK))
goto jump_stack_overflow;
jump_stack[jsp++] = pc + asn1_op_lengths[op];
pc = machine[pc + 2];
goto next_op;
case ASN1_OP_COND_FAIL:
if (unlikely(!(flags & FLAG_MATCHED)))
goto tag_mismatch;
pc += asn1_op_lengths[op];
goto next_op;
case ASN1_OP_COMPLETE:
if (unlikely(jsp != 0 || csp != 0)) {
pr_err("ASN.1 decoder error: Stacks not empty at completion (%u, %u)\n",
jsp, csp);
return -EBADMSG;
}
return 0;
case ASN1_OP_END_SET:
case ASN1_OP_END_SET_ACT:
if (unlikely(!(flags & FLAG_MATCHED)))
goto tag_mismatch;
case ASN1_OP_END_SEQ:
case ASN1_OP_END_SET_OF:
case ASN1_OP_END_SEQ_OF:
case ASN1_OP_END_SEQ_ACT:
case ASN1_OP_END_SET_OF_ACT:
case ASN1_OP_END_SEQ_OF_ACT:
if (unlikely(csp <= 0))
goto cons_stack_underflow;
csp--;
tdp = cons_dp_stack[csp];
hdr = cons_hdrlen_stack[csp];
len = datalen;
datalen = cons_datalen_stack[csp];
pr_debug("- end cons t=%zu dp=%zu l=%zu/%zu\n",
tdp, dp, len, datalen);
if (datalen == 0) {
/* Indefinite length - check for the EOC. */
datalen = len;
if (unlikely(datalen - dp < 2))
goto data_overrun_error;
if (data[dp++] != 0) {
if (op & ASN1_OP_END__OF) {
dp--;
csp++;
pc = machine[pc + 1];
pr_debug("- continue\n");
goto next_op;
}
goto missing_eoc;
}
if (data[dp++] != 0)
goto invalid_eoc;
len = dp - tdp - 2;
} else {
if (dp < len && (op & ASN1_OP_END__OF)) {
datalen = len;
csp++;
pc = machine[pc + 1];
pr_debug("- continue\n");
goto next_op;
}
if (dp != len)
goto cons_length_error;
len -= tdp;
pr_debug("- cons len l=%zu d=%zu\n", len, dp - tdp);
}
if (op & ASN1_OP_END__ACT) {
unsigned char act;
if (op & ASN1_OP_END__OF)
act = machine[pc + 2];
else
act = machine[pc + 1];
ret = actions[act](context, hdr, 0, data + tdp, len);
}
pc += asn1_op_lengths[op];
goto next_op;
ASN.1: Fix actions on CHOICE elements with IMPLICIT tags In an ASN.1 description where there is a CHOICE construct that contains elements with IMPLICIT tags that refer to constructed types, actions to be taken on those elements should be conditional on the corresponding element actually being matched. Currently, however, such actions are performed unconditionally in the middle of processing the CHOICE. For example, look at elements 'b' and 'e' here: A ::= SEQUENCE { CHOICE { b [0] IMPLICIT B ({ do_XXXXXXXXXXXX_b }), c [1] EXPLICIT C ({ do_XXXXXXXXXXXX_c }), d [2] EXPLICIT B ({ do_XXXXXXXXXXXX_d }), e [3] IMPLICIT C ({ do_XXXXXXXXXXXX_e }), f [4] IMPLICIT INTEGER ({ do_XXXXXXXXXXXX_f }) } } ({ do_XXXXXXXXXXXX_A }) B ::= SET OF OBJECT IDENTIFIER ({ do_XXXXXXXXXXXX_oid }) C ::= SET OF INTEGER ({ do_XXXXXXXXXXXX_int }) They each have an action (do_XXXXXXXXXXXX_b and do_XXXXXXXXXXXX_e) that should only be processed if that element is matched. The problem is that there's no easy place to hang the action off in the subclause (type B for element 'b' and type C for element 'e') because subclause opcode sequences can be shared. To fix this, introduce a conditional action opcode(ASN1_OP_MAYBE_ACT) that the decoder only processes if the preceding match was successful. This can be seen in an excerpt from the output of the fixed ASN.1 compiler for the above ASN.1 description: [ 13] = ASN1_OP_COND_MATCH_JUMP_OR_SKIP, // e [ 14] = _tagn(CONT, CONS, 3), [ 15] = _jump_target(45), // --> C [ 16] = ASN1_OP_MAYBE_ACT, [ 17] = _action(ACT_do_XXXXXXXXXXXX_e), In this, if the op at [13] is matched (ie. element 'e' above) then the action at [16] will be performed. However, if the op at [13] doesn't match or is skipped because it is conditional and some previous op matched, then the action at [16] will be ignored. Note that to make this work in the decoder, the ASN1_OP_RETURN op must set the flag to indicate that a match happened. This is necessary because the _jump_target() seen above introduces a subclause (in this case an object of type 'C') which is likely to alter the flag. Setting the flag here is okay because to process a subclause, a match must have happened and caused a jump. This cannot be tested with the code as it stands, but rather affects future code. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
2015-08-05 19:54:46 +08:00
case ASN1_OP_MAYBE_ACT:
if (!(flags & FLAG_LAST_MATCHED)) {
pc += asn1_op_lengths[op];
goto next_op;
}
case ASN1_OP_ACT:
ret = actions[machine[pc + 1]](context, hdr, tag, data + tdp, len);
ASN.1: Fix actions on CHOICE elements with IMPLICIT tags In an ASN.1 description where there is a CHOICE construct that contains elements with IMPLICIT tags that refer to constructed types, actions to be taken on those elements should be conditional on the corresponding element actually being matched. Currently, however, such actions are performed unconditionally in the middle of processing the CHOICE. For example, look at elements 'b' and 'e' here: A ::= SEQUENCE { CHOICE { b [0] IMPLICIT B ({ do_XXXXXXXXXXXX_b }), c [1] EXPLICIT C ({ do_XXXXXXXXXXXX_c }), d [2] EXPLICIT B ({ do_XXXXXXXXXXXX_d }), e [3] IMPLICIT C ({ do_XXXXXXXXXXXX_e }), f [4] IMPLICIT INTEGER ({ do_XXXXXXXXXXXX_f }) } } ({ do_XXXXXXXXXXXX_A }) B ::= SET OF OBJECT IDENTIFIER ({ do_XXXXXXXXXXXX_oid }) C ::= SET OF INTEGER ({ do_XXXXXXXXXXXX_int }) They each have an action (do_XXXXXXXXXXXX_b and do_XXXXXXXXXXXX_e) that should only be processed if that element is matched. The problem is that there's no easy place to hang the action off in the subclause (type B for element 'b' and type C for element 'e') because subclause opcode sequences can be shared. To fix this, introduce a conditional action opcode(ASN1_OP_MAYBE_ACT) that the decoder only processes if the preceding match was successful. This can be seen in an excerpt from the output of the fixed ASN.1 compiler for the above ASN.1 description: [ 13] = ASN1_OP_COND_MATCH_JUMP_OR_SKIP, // e [ 14] = _tagn(CONT, CONS, 3), [ 15] = _jump_target(45), // --> C [ 16] = ASN1_OP_MAYBE_ACT, [ 17] = _action(ACT_do_XXXXXXXXXXXX_e), In this, if the op at [13] is matched (ie. element 'e' above) then the action at [16] will be performed. However, if the op at [13] doesn't match or is skipped because it is conditional and some previous op matched, then the action at [16] will be ignored. Note that to make this work in the decoder, the ASN1_OP_RETURN op must set the flag to indicate that a match happened. This is necessary because the _jump_target() seen above introduces a subclause (in this case an object of type 'C') which is likely to alter the flag. Setting the flag here is okay because to process a subclause, a match must have happened and caused a jump. This cannot be tested with the code as it stands, but rather affects future code. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
2015-08-05 19:54:46 +08:00
if (ret < 0)
return ret;
pc += asn1_op_lengths[op];
goto next_op;
case ASN1_OP_RETURN:
if (unlikely(jsp <= 0))
goto jump_stack_underflow;
pc = jump_stack[--jsp];
ASN.1: Fix actions on CHOICE elements with IMPLICIT tags In an ASN.1 description where there is a CHOICE construct that contains elements with IMPLICIT tags that refer to constructed types, actions to be taken on those elements should be conditional on the corresponding element actually being matched. Currently, however, such actions are performed unconditionally in the middle of processing the CHOICE. For example, look at elements 'b' and 'e' here: A ::= SEQUENCE { CHOICE { b [0] IMPLICIT B ({ do_XXXXXXXXXXXX_b }), c [1] EXPLICIT C ({ do_XXXXXXXXXXXX_c }), d [2] EXPLICIT B ({ do_XXXXXXXXXXXX_d }), e [3] IMPLICIT C ({ do_XXXXXXXXXXXX_e }), f [4] IMPLICIT INTEGER ({ do_XXXXXXXXXXXX_f }) } } ({ do_XXXXXXXXXXXX_A }) B ::= SET OF OBJECT IDENTIFIER ({ do_XXXXXXXXXXXX_oid }) C ::= SET OF INTEGER ({ do_XXXXXXXXXXXX_int }) They each have an action (do_XXXXXXXXXXXX_b and do_XXXXXXXXXXXX_e) that should only be processed if that element is matched. The problem is that there's no easy place to hang the action off in the subclause (type B for element 'b' and type C for element 'e') because subclause opcode sequences can be shared. To fix this, introduce a conditional action opcode(ASN1_OP_MAYBE_ACT) that the decoder only processes if the preceding match was successful. This can be seen in an excerpt from the output of the fixed ASN.1 compiler for the above ASN.1 description: [ 13] = ASN1_OP_COND_MATCH_JUMP_OR_SKIP, // e [ 14] = _tagn(CONT, CONS, 3), [ 15] = _jump_target(45), // --> C [ 16] = ASN1_OP_MAYBE_ACT, [ 17] = _action(ACT_do_XXXXXXXXXXXX_e), In this, if the op at [13] is matched (ie. element 'e' above) then the action at [16] will be performed. However, if the op at [13] doesn't match or is skipped because it is conditional and some previous op matched, then the action at [16] will be ignored. Note that to make this work in the decoder, the ASN1_OP_RETURN op must set the flag to indicate that a match happened. This is necessary because the _jump_target() seen above introduces a subclause (in this case an object of type 'C') which is likely to alter the flag. Setting the flag here is okay because to process a subclause, a match must have happened and caused a jump. This cannot be tested with the code as it stands, but rather affects future code. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
2015-08-05 19:54:46 +08:00
flags |= FLAG_MATCHED | FLAG_LAST_MATCHED;
goto next_op;
default:
break;
}
/* Shouldn't reach here */
ASN.1: Fix actions on CHOICE elements with IMPLICIT tags In an ASN.1 description where there is a CHOICE construct that contains elements with IMPLICIT tags that refer to constructed types, actions to be taken on those elements should be conditional on the corresponding element actually being matched. Currently, however, such actions are performed unconditionally in the middle of processing the CHOICE. For example, look at elements 'b' and 'e' here: A ::= SEQUENCE { CHOICE { b [0] IMPLICIT B ({ do_XXXXXXXXXXXX_b }), c [1] EXPLICIT C ({ do_XXXXXXXXXXXX_c }), d [2] EXPLICIT B ({ do_XXXXXXXXXXXX_d }), e [3] IMPLICIT C ({ do_XXXXXXXXXXXX_e }), f [4] IMPLICIT INTEGER ({ do_XXXXXXXXXXXX_f }) } } ({ do_XXXXXXXXXXXX_A }) B ::= SET OF OBJECT IDENTIFIER ({ do_XXXXXXXXXXXX_oid }) C ::= SET OF INTEGER ({ do_XXXXXXXXXXXX_int }) They each have an action (do_XXXXXXXXXXXX_b and do_XXXXXXXXXXXX_e) that should only be processed if that element is matched. The problem is that there's no easy place to hang the action off in the subclause (type B for element 'b' and type C for element 'e') because subclause opcode sequences can be shared. To fix this, introduce a conditional action opcode(ASN1_OP_MAYBE_ACT) that the decoder only processes if the preceding match was successful. This can be seen in an excerpt from the output of the fixed ASN.1 compiler for the above ASN.1 description: [ 13] = ASN1_OP_COND_MATCH_JUMP_OR_SKIP, // e [ 14] = _tagn(CONT, CONS, 3), [ 15] = _jump_target(45), // --> C [ 16] = ASN1_OP_MAYBE_ACT, [ 17] = _action(ACT_do_XXXXXXXXXXXX_e), In this, if the op at [13] is matched (ie. element 'e' above) then the action at [16] will be performed. However, if the op at [13] doesn't match or is skipped because it is conditional and some previous op matched, then the action at [16] will be ignored. Note that to make this work in the decoder, the ASN1_OP_RETURN op must set the flag to indicate that a match happened. This is necessary because the _jump_target() seen above introduces a subclause (in this case an object of type 'C') which is likely to alter the flag. Setting the flag here is okay because to process a subclause, a match must have happened and caused a jump. This cannot be tested with the code as it stands, but rather affects future code. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
2015-08-05 19:54:46 +08:00
pr_err("ASN.1 decoder error: Found reserved opcode (%u) pc=%zu\n",
op, pc);
return -EBADMSG;
data_overrun_error:
errmsg = "Data overrun error";
goto error;
machine_overrun_error:
errmsg = "Machine overrun error";
goto error;
jump_stack_underflow:
errmsg = "Jump stack underflow";
goto error;
jump_stack_overflow:
errmsg = "Jump stack overflow";
goto error;
cons_stack_underflow:
errmsg = "Cons stack underflow";
goto error;
cons_stack_overflow:
errmsg = "Cons stack overflow";
goto error;
cons_length_error:
errmsg = "Cons length error";
goto error;
missing_eoc:
errmsg = "Missing EOC in indefinite len cons";
goto error;
invalid_eoc:
errmsg = "Invalid length EOC";
goto error;
length_too_long:
errmsg = "Unsupported length";
goto error;
indefinite_len_primitive:
errmsg = "Indefinite len primitive not permitted";
goto error;
tag_mismatch:
errmsg = "Unexpected tag";
goto error;
long_tag_not_supported:
errmsg = "Long tag not supported";
error:
pr_debug("\nASN1: %s [m=%zu d=%zu ot=%02x t=%02x l=%zu]\n",
errmsg, pc, dp, optag, tag, len);
return -EBADMSG;
}
EXPORT_SYMBOL_GPL(asn1_ber_decoder);
MODULE_LICENSE("GPL");