OpenCloudOS-Kernel/drivers/cpufreq/pxa2xx-cpufreq.c

340 lines
9.4 KiB
C
Raw Normal View History

/*
* Copyright (C) 2002,2003 Intrinsyc Software
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* History:
* 31-Jul-2002 : Initial version [FB]
* 29-Jan-2003 : added PXA255 support [FB]
* 20-Apr-2003 : ported to v2.5 (Dustin McIntire, Sensoria Corp.)
*
* Note:
* This driver may change the memory bus clock rate, but will not do any
* platform specific access timing changes... for example if you have flash
* memory connected to CS0, you will need to register a platform specific
* notifier which will adjust the memory access strobes to maintain a
* minimum strobe width.
*
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/cpufreq.h>
#include <linux/err.h>
#include <linux/regulator/consumer.h>
#include <linux/io.h>
#include <mach/pxa2xx-regs.h>
#include <mach/smemc.h>
#ifdef DEBUG
static unsigned int freq_debug;
module_param(freq_debug, uint, 0);
MODULE_PARM_DESC(freq_debug, "Set the debug messages to on=1/off=0");
#else
#define freq_debug 0
#endif
static struct regulator *vcc_core;
static unsigned int pxa27x_maxfreq;
module_param(pxa27x_maxfreq, uint, 0);
MODULE_PARM_DESC(pxa27x_maxfreq, "Set the pxa27x maxfreq in MHz"
"(typically 624=>pxa270, 416=>pxa271, 520=>pxa272)");
struct pxa_cpufreq_data {
struct clk *clk_core;
};
static struct pxa_cpufreq_data pxa_cpufreq_data;
struct pxa_freqs {
unsigned int khz;
int vmin;
int vmax;
};
/*
* PXA255 definitions
*/
static const struct pxa_freqs pxa255_run_freqs[] =
{
/* CPU MEMBUS run turbo PXbus SDRAM */
{ 99500, -1, -1}, /* 99, 99, 50, 50 */
{132700, -1, -1}, /* 133, 133, 66, 66 */
{199100, -1, -1}, /* 199, 199, 99, 99 */
{265400, -1, -1}, /* 265, 265, 133, 66 */
{331800, -1, -1}, /* 331, 331, 166, 83 */
{398100, -1, -1}, /* 398, 398, 196, 99 */
};
/* Use the turbo mode frequencies for the CPUFREQ_POLICY_POWERSAVE policy */
static const struct pxa_freqs pxa255_turbo_freqs[] =
{
/* CPU run turbo PXbus SDRAM */
{ 99500, -1, -1}, /* 99, 99, 50, 50 */
{199100, -1, -1}, /* 99, 199, 50, 99 */
{298500, -1, -1}, /* 99, 287, 50, 99 */
{298600, -1, -1}, /* 199, 287, 99, 99 */
{398100, -1, -1}, /* 199, 398, 99, 99 */
};
#define NUM_PXA25x_RUN_FREQS ARRAY_SIZE(pxa255_run_freqs)
#define NUM_PXA25x_TURBO_FREQS ARRAY_SIZE(pxa255_turbo_freqs)
static struct cpufreq_frequency_table
pxa255_run_freq_table[NUM_PXA25x_RUN_FREQS+1];
static struct cpufreq_frequency_table
pxa255_turbo_freq_table[NUM_PXA25x_TURBO_FREQS+1];
static unsigned int pxa255_turbo_table;
module_param(pxa255_turbo_table, uint, 0);
MODULE_PARM_DESC(pxa255_turbo_table, "Selects the frequency table (0 = run table, !0 = turbo table)");
static struct pxa_freqs pxa27x_freqs[] = {
{104000, 900000, 1705000 },
{156000, 1000000, 1705000 },
{208000, 1180000, 1705000 },
{312000, 1250000, 1705000 },
{416000, 1350000, 1705000 },
{520000, 1450000, 1705000 },
{624000, 1550000, 1705000 }
};
#define NUM_PXA27x_FREQS ARRAY_SIZE(pxa27x_freqs)
static struct cpufreq_frequency_table
pxa27x_freq_table[NUM_PXA27x_FREQS+1];
extern unsigned get_clk_frequency_khz(int info);
#ifdef CONFIG_REGULATOR
static int pxa_cpufreq_change_voltage(const struct pxa_freqs *pxa_freq)
{
int ret = 0;
int vmin, vmax;
if (!cpu_is_pxa27x())
return 0;
vmin = pxa_freq->vmin;
vmax = pxa_freq->vmax;
if ((vmin == -1) || (vmax == -1))
return 0;
ret = regulator_set_voltage(vcc_core, vmin, vmax);
if (ret)
pr_err("Failed to set vcc_core in [%dmV..%dmV]\n", vmin, vmax);
return ret;
}
static void __init pxa_cpufreq_init_voltages(void)
{
vcc_core = regulator_get(NULL, "vcc_core");
if (IS_ERR(vcc_core)) {
pr_info("Didn't find vcc_core regulator\n");
vcc_core = NULL;
} else {
pr_info("Found vcc_core regulator\n");
}
}
#else
static int pxa_cpufreq_change_voltage(const struct pxa_freqs *pxa_freq)
{
return 0;
}
static void __init pxa_cpufreq_init_voltages(void) { }
#endif
static void find_freq_tables(struct cpufreq_frequency_table **freq_table,
const struct pxa_freqs **pxa_freqs)
{
if (cpu_is_pxa25x()) {
if (!pxa255_turbo_table) {
*pxa_freqs = pxa255_run_freqs;
*freq_table = pxa255_run_freq_table;
} else {
*pxa_freqs = pxa255_turbo_freqs;
*freq_table = pxa255_turbo_freq_table;
}
} else if (cpu_is_pxa27x()) {
*pxa_freqs = pxa27x_freqs;
*freq_table = pxa27x_freq_table;
} else {
BUG();
}
}
static void pxa27x_guess_max_freq(void)
{
if (!pxa27x_maxfreq) {
pxa27x_maxfreq = 416000;
pr_info("PXA CPU 27x max frequency not defined (pxa27x_maxfreq), assuming pxa271 with %dkHz maxfreq\n",
pxa27x_maxfreq);
} else {
pxa27x_maxfreq *= 1000;
}
}
static unsigned int pxa_cpufreq_get(unsigned int cpu)
{
struct pxa_cpufreq_data *data = cpufreq_get_driver_data();
return (unsigned int) clk_get_rate(data->clk_core) / 1000;
}
cpufreq: Implement light weight ->target_index() routine Currently, the prototype of cpufreq_drivers target routines is: int target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation); And most of the drivers call cpufreq_frequency_table_target() to get a valid index of their frequency table which is closest to the target_freq. And they don't use target_freq and relation after that. So, it makes sense to just do this work in cpufreq core before calling cpufreq_frequency_table_target() and simply pass index instead. But this can be done only with drivers which expose their frequency table with cpufreq core. For others we need to stick with the old prototype of target() until those drivers are converted to expose frequency tables. This patch implements the new light weight prototype for target_index() routine. It looks like this: int target_index(struct cpufreq_policy *policy, unsigned int index); CPUFreq core will call cpufreq_frequency_table_target() before calling this routine and pass index to it. Because CPUFreq core now requires to call routines present in freq_table.c CONFIG_CPU_FREQ_TABLE must be enabled all the time. This also marks target() interface as deprecated. So, that new drivers avoid using it. And Documentation is updated accordingly. It also converts existing .target() to newly defined light weight .target_index() routine for many driver. Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Russell King <linux@arm.linux.org.uk> Acked-by: David S. Miller <davem@davemloft.net> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rjw@rjwysocki.net>
2013-10-25 22:15:48 +08:00
static int pxa_set_target(struct cpufreq_policy *policy, unsigned int idx)
{
struct cpufreq_frequency_table *pxa_freqs_table;
const struct pxa_freqs *pxa_freq_settings;
struct pxa_cpufreq_data *data = cpufreq_get_driver_data();
unsigned int new_freq_cpu;
int ret = 0;
/* Get the current policy */
find_freq_tables(&pxa_freqs_table, &pxa_freq_settings);
new_freq_cpu = pxa_freq_settings[idx].khz;
if (freq_debug)
pr_debug("Changing CPU frequency from %d Mhz to %d Mhz\n",
policy->cur / 1000, new_freq_cpu / 1000);
if (vcc_core && new_freq_cpu > policy->cur) {
ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]);
if (ret)
return ret;
}
clk_set_rate(data->clk_core, new_freq_cpu * 1000);
/*
* Even if voltage setting fails, we don't report it, as the frequency
* change succeeded. The voltage reduction is not a critical failure,
* only power savings will suffer from this.
*
* Note: if the voltage change fails, and a return value is returned, a
* bug is triggered (seems a deadlock). Should anybody find out where,
* the "return 0" should become a "return ret".
*/
if (vcc_core && new_freq_cpu < policy->cur)
ret = pxa_cpufreq_change_voltage(&pxa_freq_settings[idx]);
return 0;
}
static int pxa_cpufreq_init(struct cpufreq_policy *policy)
{
int i;
unsigned int freq;
struct cpufreq_frequency_table *pxa255_freq_table;
const struct pxa_freqs *pxa255_freqs;
/* try to guess pxa27x cpu */
if (cpu_is_pxa27x())
pxa27x_guess_max_freq();
pxa_cpufreq_init_voltages();
/* set default policy and cpuinfo */
policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
/* Generate pxa25x the run cpufreq_frequency_table struct */
for (i = 0; i < NUM_PXA25x_RUN_FREQS; i++) {
pxa255_run_freq_table[i].frequency = pxa255_run_freqs[i].khz;
pxa255_run_freq_table[i].driver_data = i;
}
pxa255_run_freq_table[i].frequency = CPUFREQ_TABLE_END;
/* Generate pxa25x the turbo cpufreq_frequency_table struct */
for (i = 0; i < NUM_PXA25x_TURBO_FREQS; i++) {
pxa255_turbo_freq_table[i].frequency =
pxa255_turbo_freqs[i].khz;
pxa255_turbo_freq_table[i].driver_data = i;
}
pxa255_turbo_freq_table[i].frequency = CPUFREQ_TABLE_END;
pxa255_turbo_table = !!pxa255_turbo_table;
/* Generate the pxa27x cpufreq_frequency_table struct */
for (i = 0; i < NUM_PXA27x_FREQS; i++) {
freq = pxa27x_freqs[i].khz;
if (freq > pxa27x_maxfreq)
break;
pxa27x_freq_table[i].frequency = freq;
pxa27x_freq_table[i].driver_data = i;
}
pxa27x_freq_table[i].driver_data = i;
pxa27x_freq_table[i].frequency = CPUFREQ_TABLE_END;
/*
* Set the policy's minimum and maximum frequencies from the tables
* just constructed. This sets cpuinfo.mxx_freq, min and max.
*/
if (cpu_is_pxa25x()) {
find_freq_tables(&pxa255_freq_table, &pxa255_freqs);
pr_info("using %s frequency table\n",
pxa255_turbo_table ? "turbo" : "run");
policy->freq_table = pxa255_freq_table;
}
else if (cpu_is_pxa27x()) {
policy->freq_table = pxa27x_freq_table;
}
pr_info("frequency change support initialized\n");
return 0;
}
static struct cpufreq_driver pxa_cpufreq_driver = {
.flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK,
.verify = cpufreq_generic_frequency_table_verify,
cpufreq: Implement light weight ->target_index() routine Currently, the prototype of cpufreq_drivers target routines is: int target(struct cpufreq_policy *policy, unsigned int target_freq, unsigned int relation); And most of the drivers call cpufreq_frequency_table_target() to get a valid index of their frequency table which is closest to the target_freq. And they don't use target_freq and relation after that. So, it makes sense to just do this work in cpufreq core before calling cpufreq_frequency_table_target() and simply pass index instead. But this can be done only with drivers which expose their frequency table with cpufreq core. For others we need to stick with the old prototype of target() until those drivers are converted to expose frequency tables. This patch implements the new light weight prototype for target_index() routine. It looks like this: int target_index(struct cpufreq_policy *policy, unsigned int index); CPUFreq core will call cpufreq_frequency_table_target() before calling this routine and pass index to it. Because CPUFreq core now requires to call routines present in freq_table.c CONFIG_CPU_FREQ_TABLE must be enabled all the time. This also marks target() interface as deprecated. So, that new drivers avoid using it. And Documentation is updated accordingly. It also converts existing .target() to newly defined light weight .target_index() routine for many driver. Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Russell King <linux@arm.linux.org.uk> Acked-by: David S. Miller <davem@davemloft.net> Tested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rjw@rjwysocki.net>
2013-10-25 22:15:48 +08:00
.target_index = pxa_set_target,
.init = pxa_cpufreq_init,
.get = pxa_cpufreq_get,
.name = "PXA2xx",
.driver_data = &pxa_cpufreq_data,
};
static int __init pxa_cpu_init(void)
{
int ret = -ENODEV;
pxa_cpufreq_data.clk_core = clk_get_sys(NULL, "core");
if (IS_ERR(pxa_cpufreq_data.clk_core))
return PTR_ERR(pxa_cpufreq_data.clk_core);
if (cpu_is_pxa25x() || cpu_is_pxa27x())
ret = cpufreq_register_driver(&pxa_cpufreq_driver);
return ret;
}
static void __exit pxa_cpu_exit(void)
{
cpufreq_unregister_driver(&pxa_cpufreq_driver);
}
MODULE_AUTHOR("Intrinsyc Software Inc.");
MODULE_DESCRIPTION("CPU frequency changing driver for the PXA architecture");
MODULE_LICENSE("GPL");
module_init(pxa_cpu_init);
module_exit(pxa_cpu_exit);