OpenCloudOS-Kernel/drivers/watchdog/Makefile

225 lines
7.8 KiB
Makefile
Raw Normal View History

#
# Makefile for the WatchDog device drivers.
#
# The WatchDog Timer Driver Core.
obj-$(CONFIG_WATCHDOG_CORE) += watchdog.o
watchdog-objs += watchdog_core.o watchdog_dev.o
watchdog-$(CONFIG_WATCHDOG_PRETIMEOUT_GOV) += watchdog_pretimeout.o
obj-$(CONFIG_WATCHDOG_PRETIMEOUT_GOV_NOOP) += pretimeout_noop.o
obj-$(CONFIG_WATCHDOG_PRETIMEOUT_GOV_PANIC) += pretimeout_panic.o
# Only one watchdog can succeed. We probe the ISA/PCI/USB based
# watchdog-cards first, then the architecture specific watchdog
# drivers and then the architecture independent "softdog" driver.
# This means that if your ISA/PCI/USB card isn't detected that
# you can fall back to an architecture specific driver and if
# that also fails then you can fall back to the software watchdog
# to give you some cover.
# ISA-based Watchdog Cards
obj-$(CONFIG_PCWATCHDOG) += pcwd.o
obj-$(CONFIG_MIXCOMWD) += mixcomwd.o
obj-$(CONFIG_WDT) += wdt.o
# PCI-based Watchdog Cards
obj-$(CONFIG_PCIPCWATCHDOG) += pcwd_pci.o
obj-$(CONFIG_WDTPCI) += wdt_pci.o
# USB-based Watchdog Cards
obj-$(CONFIG_USBPCWATCHDOG) += pcwd_usb.o
# ALPHA Architecture
# ARM Architecture
obj-$(CONFIG_ARM_SP805_WATCHDOG) += sp805_wdt.o
Watchdog: introduce ARM SBSA watchdog driver According to Server Base System Architecture (SBSA) specification, the SBSA Generic Watchdog has two stage timeouts: the first signal (WS0) is for alerting the system by interrupt, the second one (WS1) is a real hardware reset. More details about the hardware specification of this device: ARM DEN0029B - Server Base System Architecture (SBSA) This driver can operate ARM SBSA Generic Watchdog as a single stage watchdog or a two stages watchdog, it's set up by the module parameter "action". In the single stage mode, when the timeout is reached, your system will be reset by WS1. The first signal (WS0) is ignored. In the two stages mode, when the timeout is reached, the first signal (WS0) will trigger panic. If the system is getting into trouble and cannot be reset by panic or restart properly by the kdump kernel(if supported), then the second stage (as long as the first stage) will be reached, system will be reset by WS1. This function can help administrator to backup the system context info by panic console output or kdump. This driver bases on linux kernel watchdog framework, so it can get timeout from module parameter and FDT at the driver init stage. Signed-off-by: Fu Wei <fu.wei@linaro.org> Reviewed-by: Graeme Gregory <graeme.gregory@linaro.org> Tested-by: Pratyush Anand <panand@redhat.com> Acked-by: Timur Tabi <timur@codeaurora.org> Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-02-29 16:46:50 +08:00
obj-$(CONFIG_ARM_SBSA_WATCHDOG) += sbsa_gwdt.o
obj-$(CONFIG_ASM9260_WATCHDOG) += asm9260_wdt.o
obj-$(CONFIG_AT91RM9200_WATCHDOG) += at91rm9200_wdt.o
obj-$(CONFIG_AT91SAM9X_WATCHDOG) += at91sam9_wdt.o
obj-$(CONFIG_CADENCE_WATCHDOG) += cadence_wdt.o
obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o
obj-$(CONFIG_TWL4030_WATCHDOG) += twl4030_wdt.o
obj-$(CONFIG_21285_WATCHDOG) += wdt285.o
obj-$(CONFIG_977_WATCHDOG) += wdt977.o
obj-$(CONFIG_GEMINI_WATCHDOG) += gemini_wdt.o
obj-$(CONFIG_IXP4XX_WATCHDOG) += ixp4xx_wdt.o
obj-$(CONFIG_KS8695_WATCHDOG) += ks8695_wdt.o
obj-$(CONFIG_S3C2410_WATCHDOG) += s3c2410_wdt.o
obj-$(CONFIG_SA1100_WATCHDOG) += sa1100_wdt.o
obj-$(CONFIG_SAMA5D4_WATCHDOG) += sama5d4_wdt.o
obj-$(CONFIG_DW_WATCHDOG) += dw_wdt.o
obj-$(CONFIG_EP93XX_WATCHDOG) += ep93xx_wdt.o
obj-$(CONFIG_PNX4008_WATCHDOG) += pnx4008_wdt.o
obj-$(CONFIG_IOP_WATCHDOG) += iop_wdt.o
obj-$(CONFIG_DAVINCI_WATCHDOG) += davinci_wdt.o
obj-$(CONFIG_ORION_WATCHDOG) += orion_wdt.o
obj-$(CONFIG_SUNXI_WATCHDOG) += sunxi_wdt.o
obj-$(CONFIG_RN5T618_WATCHDOG) += rn5t618_wdt.o
obj-$(CONFIG_COH901327_WATCHDOG) += coh901327_wdt.o
obj-$(CONFIG_STMP3XXX_RTC_WATCHDOG) += stmp3xxx_rtc_wdt.o
obj-$(CONFIG_NUC900_WATCHDOG) += nuc900_wdt.o
obj-$(CONFIG_TS4800_WATCHDOG) += ts4800_wdt.o
obj-$(CONFIG_TS72XX_WATCHDOG) += ts72xx_wdt.o
obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o
obj-$(CONFIG_UX500_WATCHDOG) += ux500_wdt.o
obj-$(CONFIG_RETU_WATCHDOG) += retu_wdt.o
obj-$(CONFIG_BCM2835_WDT) += bcm2835_wdt.o
obj-$(CONFIG_MOXART_WDT) += moxart_wdt.o
obj-$(CONFIG_SIRFSOC_WATCHDOG) += sirfsoc_wdt.o
obj-$(CONFIG_ST_LPC_WATCHDOG) += st_lpc_wdt.o
obj-$(CONFIG_QCOM_WDT) += qcom-wdt.o
obj-$(CONFIG_BCM_KONA_WDT) += bcm_kona_wdt.o
obj-$(CONFIG_TEGRA_WATCHDOG) += tegra_wdt.o
obj-$(CONFIG_MESON_GXBB_WATCHDOG) += meson_gxbb_wdt.o
obj-$(CONFIG_MESON_WATCHDOG) += meson_wdt.o
obj-$(CONFIG_MEDIATEK_WATCHDOG) += mtk_wdt.o
obj-$(CONFIG_DIGICOLOR_WATCHDOG) += digicolor_wdt.o
obj-$(CONFIG_LPC18XX_WATCHDOG) += lpc18xx_wdt.o
obj-$(CONFIG_BCM7038_WDT) += bcm7038_wdt.o
obj-$(CONFIG_ATLAS7_WATCHDOG) += atlas7_wdt.o
obj-$(CONFIG_RENESAS_WDT) += renesas_wdt.o
obj-$(CONFIG_RENESAS_RZAWDT) += rza_wdt.o
obj-$(CONFIG_ASPEED_WATCHDOG) += aspeed_wdt.o
obj-$(CONFIG_ZX2967_WATCHDOG) += zx2967_wdt.o
obj-$(CONFIG_STM32_WATCHDOG) += stm32_iwdg.o
# AVR32 Architecture
obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
# BLACKFIN Architecture
obj-$(CONFIG_BFIN_WDT) += bfin_wdt.o
# CRIS Architecture
# FRV Architecture
# X86 (i386 + ia64 + x86_64) Architecture
obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o
obj-$(CONFIG_ALIM1535_WDT) += alim1535_wdt.o
obj-$(CONFIG_ALIM7101_WDT) += alim7101_wdt.o
obj-$(CONFIG_EBC_C384_WDT) += ebc-c384_wdt.o
obj-$(CONFIG_F71808E_WDT) += f71808e_wdt.o
obj-$(CONFIG_SP5100_TCO) += sp5100_tco.o
obj-$(CONFIG_GEODE_WDT) += geodewdt.o
obj-$(CONFIG_SC520_WDT) += sc520_wdt.o
obj-$(CONFIG_SBC_FITPC2_WATCHDOG) += sbc_fitpc2_wdt.o
obj-$(CONFIG_EUROTECH_WDT) += eurotechwdt.o
obj-$(CONFIG_IB700_WDT) += ib700wdt.o
obj-$(CONFIG_IBMASR) += ibmasr.o
obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o
obj-$(CONFIG_I6300ESB_WDT) += i6300esb.o
obj-$(CONFIG_IE6XX_WDT) += ie6xx_wdt.o
obj-$(CONFIG_ITCO_WDT) += iTCO_wdt.o
ifeq ($(CONFIG_ITCO_VENDOR_SUPPORT),y)
obj-$(CONFIG_ITCO_WDT) += iTCO_vendor_support.o
endif
obj-$(CONFIG_IT8712F_WDT) += it8712f_wdt.o
obj-$(CONFIG_IT87_WDT) += it87_wdt.o
obj-$(CONFIG_HP_WATCHDOG) += hpwdt.o
obj-$(CONFIG_KEMPLD_WDT) += kempld_wdt.o
obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o
obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o
obj-$(CONFIG_PC87413_WDT) += pc87413_wdt.o
obj-$(CONFIG_NV_TCO) += nv_tco.o
obj-$(CONFIG_RDC321X_WDT) += rdc321x_wdt.o
obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o
obj-$(CONFIG_SBC8360_WDT) += sbc8360.o
obj-$(CONFIG_SBC7240_WDT) += sbc7240_wdt.o
obj-$(CONFIG_CPU5_WDT) += cpu5wdt.o
obj-$(CONFIG_SMSC_SCH311X_WDT) += sch311x_wdt.o
obj-$(CONFIG_SMSC37B787_WDT) += smsc37b787_wdt.o
obj-$(CONFIG_VIA_WDT) += via_wdt.o
obj-$(CONFIG_W83627HF_WDT) += w83627hf_wdt.o
obj-$(CONFIG_W83877F_WDT) += w83877f_wdt.o
obj-$(CONFIG_W83977F_WDT) += w83977f_wdt.o
obj-$(CONFIG_MACHZ_WDT) += machzwd.o
obj-$(CONFIG_SBC_EPX_C3_WATCHDOG) += sbc_epx_c3.o
obj-$(CONFIG_INTEL_SCU_WATCHDOG) += intel_scu_watchdog.o
obj-$(CONFIG_INTEL_MID_WATCHDOG) += intel-mid_wdt.o
obj-$(CONFIG_INTEL_MEI_WDT) += mei_wdt.o
obj-$(CONFIG_NI903X_WDT) += ni903x_wdt.o
obj-$(CONFIG_NIC7018_WDT) += nic7018_wdt.o
# M32R Architecture
# M68K Architecture
obj-$(CONFIG_M54xx_WATCHDOG) += m54xx_wdt.o
# MicroBlaze Architecture
obj-$(CONFIG_XILINX_WATCHDOG) += of_xilinx_wdt.o
# MIPS Architecture
obj-$(CONFIG_ATH79_WDT) += ath79_wdt.o
obj-$(CONFIG_BCM47XX_WDT) += bcm47xx_wdt.o
obj-$(CONFIG_BCM63XX_WDT) += bcm63xx_wdt.o
obj-$(CONFIG_RC32434_WDT) += rc32434_wdt.o
obj-$(CONFIG_INDYDOG) += indydog.o
obj-$(CONFIG_JZ4740_WDT) += jz4740_wdt.o
obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o
obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o
octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o
obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
obj-$(CONFIG_LOONGSON1_WDT) += loongson1_wdt.o
obj-$(CONFIG_RALINK_WDT) += rt2880_wdt.o
obj-$(CONFIG_IMGPDC_WDT) += imgpdc_wdt.o
obj-$(CONFIG_MT7621_WDT) += mt7621_wdt.o
obj-$(CONFIG_PIC32_WDT) += pic32-wdt.o
obj-$(CONFIG_PIC32_DMT) += pic32-dmt.o
# PARISC Architecture
# POWERPC Architecture
obj-$(CONFIG_GEF_WDT) += gef_wdt.o
obj-$(CONFIG_8xxx_WDT) += mpc8xxx_wdt.o
obj-$(CONFIG_MV64X60_WDT) += mv64x60_wdt.o
obj-$(CONFIG_PIKA_WDT) += pika_wdt.o
obj-$(CONFIG_BOOKE_WDT) += booke_wdt.o
obj-$(CONFIG_MEN_A21_WDT) += mena21_wdt.o
# PPC64 Architecture
obj-$(CONFIG_WATCHDOG_RTAS) += wdrtas.o
# S390 Architecture
obj-$(CONFIG_DIAG288_WATCHDOG) += diag288_wdt.o
# SUPERH (sh + sh64) Architecture
obj-$(CONFIG_SH_WDT) += shwdt.o
# SPARC Architecture
# SPARC64 Architecture
obj-$(CONFIG_WATCHDOG_RIO) += riowd.o
obj-$(CONFIG_WATCHDOG_CP1XXX) += cpwd.o
obj-$(CONFIG_WATCHDOG_SUN4V) += sun4v_wdt.o
# XTENSA Architecture
# Xen
obj-$(CONFIG_XEN_WDT) += xen_wdt.o
# Architecture Independent
obj-$(CONFIG_DA9052_WATCHDOG) += da9052_wdt.o
obj-$(CONFIG_DA9055_WATCHDOG) += da9055_wdt.o
obj-$(CONFIG_DA9062_WATCHDOG) += da9062_wdt.o
obj-$(CONFIG_DA9063_WATCHDOG) += da9063_wdt.o
obj-$(CONFIG_GPIO_WATCHDOG) += gpio_wdt.o
obj-$(CONFIG_TANGOX_WATCHDOG) += tangox_wdt.o
obj-$(CONFIG_WDAT_WDT) += wdat_wdt.o
obj-$(CONFIG_WM831X_WATCHDOG) += wm831x_wdt.o
obj-$(CONFIG_WM8350_WATCHDOG) += wm8350_wdt.o
obj-$(CONFIG_MAX63XX_WATCHDOG) += max63xx_wdt.o
obj-$(CONFIG_MAX77620_WATCHDOG) += max77620_wdt.o
obj-$(CONFIG_ZIIRAVE_WATCHDOG) += ziirave_wdt.o
obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
obj-$(CONFIG_MENF21BMC_WATCHDOG) += menf21bmc_wdt.o