OpenCloudOS-Kernel/include/linux/thermal.h

520 lines
18 KiB
C
Raw Normal View History

/*
* thermal.h ($Revision: 0 $)
*
* Copyright (C) 2008 Intel Corp
* Copyright (C) 2008 Zhang Rui <rui.zhang@intel.com>
* Copyright (C) 2008 Sujith Thomas <sujith.thomas@intel.com>
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
#ifndef __THERMAL_H__
#define __THERMAL_H__
#include <linux/of.h>
#include <linux/idr.h>
#include <linux/device.h>
#include <linux/workqueue.h>
#include <uapi/linux/thermal.h>
#define THERMAL_TRIPS_NONE -1
#define THERMAL_MAX_TRIPS 12
/* invalid cooling state */
#define THERMAL_CSTATE_INVALID -1UL
/* No upper/lower limit requirement */
#define THERMAL_NO_LIMIT ((u32)~0)
/* Default weight of a bound cooling device */
#define THERMAL_WEIGHT_DEFAULT 0
/* use value, which < 0K, to indicate an invalid/uninitialized temperature */
#define THERMAL_TEMP_INVALID -274000
/* Unit conversion macros */
#define DECI_KELVIN_TO_CELSIUS(t) ({ \
long _t = (t); \
((_t-2732 >= 0) ? (_t-2732+5)/10 : (_t-2732-5)/10); \
})
#define CELSIUS_TO_DECI_KELVIN(t) ((t)*10+2732)
#define DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET(t, off) (((t) - (off)) * 100)
#define DECI_KELVIN_TO_MILLICELSIUS(t) DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET(t, 2732)
#define MILLICELSIUS_TO_DECI_KELVIN_WITH_OFFSET(t, off) (((t) / 100) + (off))
#define MILLICELSIUS_TO_DECI_KELVIN(t) MILLICELSIUS_TO_DECI_KELVIN_WITH_OFFSET(t, 2732)
/* Default Thermal Governor */
#if defined(CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE)
#define DEFAULT_THERMAL_GOVERNOR "step_wise"
#elif defined(CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE)
#define DEFAULT_THERMAL_GOVERNOR "fair_share"
#elif defined(CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE)
#define DEFAULT_THERMAL_GOVERNOR "user_space"
#elif defined(CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR)
#define DEFAULT_THERMAL_GOVERNOR "power_allocator"
#endif
struct thermal_zone_device;
struct thermal_cooling_device;
struct thermal_instance;
enum thermal_device_mode {
THERMAL_DEVICE_DISABLED = 0,
THERMAL_DEVICE_ENABLED,
};
enum thermal_trip_type {
THERMAL_TRIP_ACTIVE = 0,
THERMAL_TRIP_PASSIVE,
THERMAL_TRIP_HOT,
THERMAL_TRIP_CRITICAL,
};
enum thermal_trend {
THERMAL_TREND_STABLE, /* temperature is stable */
THERMAL_TREND_RAISING, /* temperature is raising */
THERMAL_TREND_DROPPING, /* temperature is dropping */
THERMAL_TREND_RAISE_FULL, /* apply highest cooling action */
THERMAL_TREND_DROP_FULL, /* apply lowest cooling action */
};
struct thermal_zone_device_ops {
int (*bind) (struct thermal_zone_device *,
struct thermal_cooling_device *);
int (*unbind) (struct thermal_zone_device *,
struct thermal_cooling_device *);
thermal: consistently use int for temperatures The thermal code uses int, long and unsigned long for temperatures in different places. Using an unsigned type limits the thermal framework to positive temperatures without need. Also several drivers currently will report temperatures near UINT_MAX for temperatures below 0°C. This will probably immediately shut the machine down due to overtemperature if started below 0°C. 'long' is 64bit on several architectures. This is not needed since INT_MAX °mC is above the melting point of all known materials. Consistently use a plain 'int' for temperatures throughout the thermal code and the drivers. This only changes the places in the drivers where the temperature is passed around as pointer, when drivers internally use another type this is not changed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Peter Feuerer <peter@piie.net> Cc: Punit Agrawal <punit.agrawal@arm.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Jean Delvare <jdelvare@suse.de> Cc: Peter Feuerer <peter@piie.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-acpi@vger.kernel.org Cc: platform-driver-x86@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Darren Hart <dvhart@infradead.org> Cc: lm-sensors@lm-sensors.org Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-07-24 14:12:54 +08:00
int (*get_temp) (struct thermal_zone_device *, int *);
int (*get_mode) (struct thermal_zone_device *,
enum thermal_device_mode *);
int (*set_mode) (struct thermal_zone_device *,
enum thermal_device_mode);
int (*get_trip_type) (struct thermal_zone_device *, int,
enum thermal_trip_type *);
thermal: consistently use int for temperatures The thermal code uses int, long and unsigned long for temperatures in different places. Using an unsigned type limits the thermal framework to positive temperatures without need. Also several drivers currently will report temperatures near UINT_MAX for temperatures below 0°C. This will probably immediately shut the machine down due to overtemperature if started below 0°C. 'long' is 64bit on several architectures. This is not needed since INT_MAX °mC is above the melting point of all known materials. Consistently use a plain 'int' for temperatures throughout the thermal code and the drivers. This only changes the places in the drivers where the temperature is passed around as pointer, when drivers internally use another type this is not changed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Peter Feuerer <peter@piie.net> Cc: Punit Agrawal <punit.agrawal@arm.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Jean Delvare <jdelvare@suse.de> Cc: Peter Feuerer <peter@piie.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-acpi@vger.kernel.org Cc: platform-driver-x86@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Darren Hart <dvhart@infradead.org> Cc: lm-sensors@lm-sensors.org Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-07-24 14:12:54 +08:00
int (*get_trip_temp) (struct thermal_zone_device *, int, int *);
int (*set_trip_temp) (struct thermal_zone_device *, int, int);
int (*get_trip_hyst) (struct thermal_zone_device *, int, int *);
int (*set_trip_hyst) (struct thermal_zone_device *, int, int);
int (*get_crit_temp) (struct thermal_zone_device *, int *);
int (*set_emul_temp) (struct thermal_zone_device *, int);
int (*get_trend) (struct thermal_zone_device *, int,
enum thermal_trend *);
int (*notify) (struct thermal_zone_device *, int,
enum thermal_trip_type);
};
struct thermal_cooling_device_ops {
int (*get_max_state) (struct thermal_cooling_device *, unsigned long *);
int (*get_cur_state) (struct thermal_cooling_device *, unsigned long *);
int (*set_cur_state) (struct thermal_cooling_device *, unsigned long);
int (*get_requested_power)(struct thermal_cooling_device *,
struct thermal_zone_device *, u32 *);
int (*state2power)(struct thermal_cooling_device *,
struct thermal_zone_device *, unsigned long, u32 *);
int (*power2state)(struct thermal_cooling_device *,
struct thermal_zone_device *, u32, unsigned long *);
};
struct thermal_cooling_device {
int id;
char type[THERMAL_NAME_LENGTH];
struct device device;
struct device_node *np;
void *devdata;
const struct thermal_cooling_device_ops *ops;
bool updated; /* true if the cooling device does not need update */
struct mutex lock; /* protect thermal_instances list */
struct list_head thermal_instances;
struct list_head node;
};
struct thermal_attr {
struct device_attribute attr;
char name[THERMAL_NAME_LENGTH];
};
/**
* struct thermal_zone_device - structure for a thermal zone
* @id: unique id number for each thermal zone
* @type: the thermal zone device type
* @device: &struct device for this thermal zone
* @trip_temp_attrs: attributes for trip points for sysfs: trip temperature
* @trip_type_attrs: attributes for trip points for sysfs: trip type
* @trip_hyst_attrs: attributes for trip points for sysfs: trip hysteresis
* @devdata: private pointer for device private data
* @trips: number of trip points the thermal zone supports
2016-03-18 10:03:24 +08:00
* @trips_disabled; bitmap for disabled trips
* @passive_delay: number of milliseconds to wait between polls when
* performing passive cooling.
* @polling_delay: number of milliseconds to wait between polls when
* checking whether trip points have been crossed (0 for
* interrupt driven systems)
* @temperature: current temperature. This is only for core code,
* drivers should use thermal_zone_get_temp() to get the
* current temperature
* @last_temperature: previous temperature read
* @emul_temperature: emulated temperature when using CONFIG_THERMAL_EMULATION
* @passive: 1 if you've crossed a passive trip point, 0 otherwise.
* @forced_passive: If > 0, temperature at which to switch on all ACPI
* processor cooling devices. Currently only used by the
* step-wise governor.
* @need_update: if equals 1, thermal_zone_device_update needs to be invoked.
* @ops: operations this &thermal_zone_device supports
* @tzp: thermal zone parameters
* @governor: pointer to the governor for this thermal zone
* @governor_data: private pointer for governor data
* @thermal_instances: list of &struct thermal_instance of this thermal zone
* @idr: &struct idr to generate unique id for this zone's cooling
* devices
* @lock: lock to protect thermal_instances list
* @node: node in thermal_tz_list (in thermal_core.c)
* @poll_queue: delayed work for polling
*/
struct thermal_zone_device {
int id;
char type[THERMAL_NAME_LENGTH];
struct device device;
struct thermal_attr *trip_temp_attrs;
struct thermal_attr *trip_type_attrs;
struct thermal_attr *trip_hyst_attrs;
void *devdata;
int trips;
2016-03-18 10:03:24 +08:00
unsigned long trips_disabled; /* bitmap for disabled trips */
int passive_delay;
int polling_delay;
int temperature;
int last_temperature;
int emul_temperature;
int passive;
unsigned int forced_passive;
atomic_t need_update;
struct thermal_zone_device_ops *ops;
struct thermal_zone_params *tzp;
struct thermal_governor *governor;
void *governor_data;
struct list_head thermal_instances;
struct idr idr;
struct mutex lock;
struct list_head node;
struct delayed_work poll_queue;
};
/**
* struct thermal_governor - structure that holds thermal governor information
* @name: name of the governor
* @bind_to_tz: callback called when binding to a thermal zone. If it
* returns 0, the governor is bound to the thermal zone,
* otherwise it fails.
* @unbind_from_tz: callback called when a governor is unbound from a
* thermal zone.
* @throttle: callback called for every trip point even if temperature is
* below the trip point temperature
* @governor_list: node in thermal_governor_list (in thermal_core.c)
*/
struct thermal_governor {
char name[THERMAL_NAME_LENGTH];
int (*bind_to_tz)(struct thermal_zone_device *tz);
void (*unbind_from_tz)(struct thermal_zone_device *tz);
int (*throttle)(struct thermal_zone_device *tz, int trip);
struct list_head governor_list;
};
/* Structure that holds binding parameters for a zone */
struct thermal_bind_params {
struct thermal_cooling_device *cdev;
/*
* This is a measure of 'how effectively these devices can
thermal: fair_share: generalize the weight concept The fair share governor has the concept of weights, which is the influence of each cooling device in a thermal zone. The current implementation forces the weights of all cooling devices in a thermal zone to add up to a 100. This complicates setups, as you need to know in advance how many cooling devices you are going to have. If you bind a new cooling device, you have to modify all the other cooling devices weights, which is error prone. Furthermore, you can't specify a "default" weight for platforms since that default value depends on the number of cooling devices in the platform. This patch generalizes the concept of weight by allowing any number to be a "weight". Weights are now relative to each other. Platforms that don't specify weights get the same default value for all their cooling devices, so all their cdevs are considered to be equally influential. It's important to note that previous users of the weights don't need to alter the code: percentages continue to work as they used to. This patch just removes the constraint of all the weights in a thermal zone having to add up to a 100. If they do, you get the same behavior as before. If they don't, fair share now works for that platform. Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: Durgadoss R <durgadoss.r@intel.com> Acked-by: Durgadoss R <durgadoss.r@intel.com> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
2015-02-19 00:04:25 +08:00
* cool 'this' thermal zone. It shall be determined by
* platform characterization. This value is relative to the
* rest of the weights so a cooling device whose weight is
* double that of another cooling device is twice as
* effective. See Documentation/thermal/sysfs-api.txt for more
* information.
*/
int weight;
/*
* This is a bit mask that gives the binding relation between this
* thermal zone and cdev, for a particular trip point.
* See Documentation/thermal/sysfs-api.txt for more information.
*/
int trip_mask;
/*
* This is an array of cooling state limits. Must have exactly
* 2 * thermal_zone.number_of_trip_points. It is an array consisting
* of tuples <lower-state upper-state> of state limits. Each trip
* will be associated with one state limit tuple when binding.
* A NULL pointer means <THERMAL_NO_LIMITS THERMAL_NO_LIMITS>
* on all trips.
*/
unsigned long *binding_limits;
int (*match) (struct thermal_zone_device *tz,
struct thermal_cooling_device *cdev);
};
/* Structure to define Thermal Zone parameters */
struct thermal_zone_params {
char governor_name[THERMAL_NAME_LENGTH];
/*
* a boolean to indicate if the thermal to hwmon sysfs interface
* is required. when no_hwmon == false, a hwmon sysfs interface
* will be created. when no_hwmon == true, nothing will be done
*/
bool no_hwmon;
int num_tbps; /* Number of tbp entries */
struct thermal_bind_params *tbp;
/*
* Sustainable power (heat) that this thermal zone can dissipate in
* mW
*/
u32 sustainable_power;
/*
* Proportional parameter of the PID controller when
* overshooting (i.e., when temperature is below the target)
*/
s32 k_po;
/*
* Proportional parameter of the PID controller when
* undershooting
*/
s32 k_pu;
/* Integral parameter of the PID controller */
s32 k_i;
/* Derivative parameter of the PID controller */
s32 k_d;
/* threshold below which the error is no longer accumulated */
s32 integral_cutoff;
/*
* @slope: slope of a linear temperature adjustment curve.
* Used by thermal zone drivers.
*/
int slope;
/*
* @offset: offset of a linear temperature adjustment curve.
* Used by thermal zone drivers (default 0).
*/
int offset;
};
struct thermal_genl_event {
u32 orig;
enum events event;
};
/**
* struct thermal_zone_of_device_ops - scallbacks for handling DT based zones
*
* Mandatory:
* @get_temp: a pointer to a function that reads the sensor temperature.
*
* Optional:
* @get_trend: a pointer to a function that reads the sensor temperature trend.
* @set_emul_temp: a pointer to a function that sets sensor emulated
* temperature.
* @set_trip_temp: a pointer to a function that sets the trip temperature on
* hardware.
*/
struct thermal_zone_of_device_ops {
thermal: consistently use int for temperatures The thermal code uses int, long and unsigned long for temperatures in different places. Using an unsigned type limits the thermal framework to positive temperatures without need. Also several drivers currently will report temperatures near UINT_MAX for temperatures below 0°C. This will probably immediately shut the machine down due to overtemperature if started below 0°C. 'long' is 64bit on several architectures. This is not needed since INT_MAX °mC is above the melting point of all known materials. Consistently use a plain 'int' for temperatures throughout the thermal code and the drivers. This only changes the places in the drivers where the temperature is passed around as pointer, when drivers internally use another type this is not changed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Peter Feuerer <peter@piie.net> Cc: Punit Agrawal <punit.agrawal@arm.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Jean Delvare <jdelvare@suse.de> Cc: Peter Feuerer <peter@piie.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-acpi@vger.kernel.org Cc: platform-driver-x86@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Darren Hart <dvhart@infradead.org> Cc: lm-sensors@lm-sensors.org Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-07-24 14:12:54 +08:00
int (*get_temp)(void *, int *);
int (*get_trend)(void *, long *);
thermal: consistently use int for temperatures The thermal code uses int, long and unsigned long for temperatures in different places. Using an unsigned type limits the thermal framework to positive temperatures without need. Also several drivers currently will report temperatures near UINT_MAX for temperatures below 0°C. This will probably immediately shut the machine down due to overtemperature if started below 0°C. 'long' is 64bit on several architectures. This is not needed since INT_MAX °mC is above the melting point of all known materials. Consistently use a plain 'int' for temperatures throughout the thermal code and the drivers. This only changes the places in the drivers where the temperature is passed around as pointer, when drivers internally use another type this is not changed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Peter Feuerer <peter@piie.net> Cc: Punit Agrawal <punit.agrawal@arm.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Jean Delvare <jdelvare@suse.de> Cc: Peter Feuerer <peter@piie.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-acpi@vger.kernel.org Cc: platform-driver-x86@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Darren Hart <dvhart@infradead.org> Cc: lm-sensors@lm-sensors.org Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-07-24 14:12:54 +08:00
int (*set_emul_temp)(void *, int);
int (*set_trip_temp)(void *, int, int);
};
/**
* struct thermal_trip - representation of a point in temperature domain
* @np: pointer to struct device_node that this trip point was created from
* @temperature: temperature value in miliCelsius
* @hysteresis: relative hysteresis in miliCelsius
* @type: trip point type
*/
struct thermal_trip {
struct device_node *np;
int temperature;
int hysteresis;
enum thermal_trip_type type;
};
/* Function declarations */
#ifdef CONFIG_THERMAL_OF
struct thermal_zone_device *
thermal_zone_of_sensor_register(struct device *dev, int id, void *data,
const struct thermal_zone_of_device_ops *ops);
void thermal_zone_of_sensor_unregister(struct device *dev,
struct thermal_zone_device *tz);
struct thermal_zone_device *devm_thermal_zone_of_sensor_register(
struct device *dev, int id, void *data,
const struct thermal_zone_of_device_ops *ops);
void devm_thermal_zone_of_sensor_unregister(struct device *dev,
struct thermal_zone_device *tz);
#else
static inline struct thermal_zone_device *
thermal_zone_of_sensor_register(struct device *dev, int id, void *data,
const struct thermal_zone_of_device_ops *ops)
{
return ERR_PTR(-ENODEV);
}
static inline
void thermal_zone_of_sensor_unregister(struct device *dev,
struct thermal_zone_device *tz)
{
}
static inline struct thermal_zone_device *devm_thermal_zone_of_sensor_register(
struct device *dev, int id, void *data,
const struct thermal_zone_of_device_ops *ops)
{
return ERR_PTR(-ENODEV);
}
static inline
void devm_thermal_zone_of_sensor_unregister(struct device *dev,
struct thermal_zone_device *tz)
{
}
#endif
#if IS_ENABLED(CONFIG_THERMAL)
static inline bool cdev_is_power_actor(struct thermal_cooling_device *cdev)
{
return cdev->ops->get_requested_power && cdev->ops->state2power &&
cdev->ops->power2state;
}
int power_actor_get_max_power(struct thermal_cooling_device *,
struct thermal_zone_device *tz, u32 *max_power);
int power_actor_get_min_power(struct thermal_cooling_device *,
struct thermal_zone_device *tz, u32 *min_power);
int power_actor_set_power(struct thermal_cooling_device *,
struct thermal_instance *, u32);
struct thermal_zone_device *thermal_zone_device_register(const char *, int, int,
void *, struct thermal_zone_device_ops *,
struct thermal_zone_params *, int, int);
void thermal_zone_device_unregister(struct thermal_zone_device *);
int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int,
struct thermal_cooling_device *,
unsigned long, unsigned long,
unsigned int);
int thermal_zone_unbind_cooling_device(struct thermal_zone_device *, int,
struct thermal_cooling_device *);
void thermal_zone_device_update(struct thermal_zone_device *);
struct thermal_cooling_device *thermal_cooling_device_register(char *, void *,
const struct thermal_cooling_device_ops *);
struct thermal_cooling_device *
thermal_of_cooling_device_register(struct device_node *np, char *, void *,
const struct thermal_cooling_device_ops *);
void thermal_cooling_device_unregister(struct thermal_cooling_device *);
struct thermal_zone_device *thermal_zone_get_zone_by_name(const char *name);
thermal: consistently use int for temperatures The thermal code uses int, long and unsigned long for temperatures in different places. Using an unsigned type limits the thermal framework to positive temperatures without need. Also several drivers currently will report temperatures near UINT_MAX for temperatures below 0°C. This will probably immediately shut the machine down due to overtemperature if started below 0°C. 'long' is 64bit on several architectures. This is not needed since INT_MAX °mC is above the melting point of all known materials. Consistently use a plain 'int' for temperatures throughout the thermal code and the drivers. This only changes the places in the drivers where the temperature is passed around as pointer, when drivers internally use another type this is not changed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Peter Feuerer <peter@piie.net> Cc: Punit Agrawal <punit.agrawal@arm.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Jean Delvare <jdelvare@suse.de> Cc: Peter Feuerer <peter@piie.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-acpi@vger.kernel.org Cc: platform-driver-x86@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Darren Hart <dvhart@infradead.org> Cc: lm-sensors@lm-sensors.org Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-07-24 14:12:54 +08:00
int thermal_zone_get_temp(struct thermal_zone_device *tz, int *temp);
int get_tz_trend(struct thermal_zone_device *, int);
struct thermal_instance *get_thermal_instance(struct thermal_zone_device *,
struct thermal_cooling_device *, int);
void thermal_cdev_update(struct thermal_cooling_device *);
void thermal_notify_framework(struct thermal_zone_device *, int);
#else
static inline bool cdev_is_power_actor(struct thermal_cooling_device *cdev)
{ return false; }
static inline int power_actor_get_max_power(struct thermal_cooling_device *cdev,
struct thermal_zone_device *tz, u32 *max_power)
{ return 0; }
static inline int power_actor_get_min_power(struct thermal_cooling_device *cdev,
struct thermal_zone_device *tz,
u32 *min_power)
{ return -ENODEV; }
static inline int power_actor_set_power(struct thermal_cooling_device *cdev,
struct thermal_instance *tz, u32 power)
{ return 0; }
static inline struct thermal_zone_device *thermal_zone_device_register(
const char *type, int trips, int mask, void *devdata,
struct thermal_zone_device_ops *ops,
const struct thermal_zone_params *tzp,
int passive_delay, int polling_delay)
{ return ERR_PTR(-ENODEV); }
static inline void thermal_zone_device_unregister(
struct thermal_zone_device *tz)
{ }
static inline int thermal_zone_bind_cooling_device(
struct thermal_zone_device *tz, int trip,
struct thermal_cooling_device *cdev,
unsigned long upper, unsigned long lower,
unsigned int weight)
{ return -ENODEV; }
static inline int thermal_zone_unbind_cooling_device(
struct thermal_zone_device *tz, int trip,
struct thermal_cooling_device *cdev)
{ return -ENODEV; }
static inline void thermal_zone_device_update(struct thermal_zone_device *tz)
{ }
static inline struct thermal_cooling_device *
thermal_cooling_device_register(char *type, void *devdata,
const struct thermal_cooling_device_ops *ops)
{ return ERR_PTR(-ENODEV); }
static inline struct thermal_cooling_device *
thermal_of_cooling_device_register(struct device_node *np,
char *type, void *devdata, const struct thermal_cooling_device_ops *ops)
{ return ERR_PTR(-ENODEV); }
static inline void thermal_cooling_device_unregister(
struct thermal_cooling_device *cdev)
{ }
static inline struct thermal_zone_device *thermal_zone_get_zone_by_name(
const char *name)
{ return ERR_PTR(-ENODEV); }
static inline int thermal_zone_get_temp(
thermal: consistently use int for temperatures The thermal code uses int, long and unsigned long for temperatures in different places. Using an unsigned type limits the thermal framework to positive temperatures without need. Also several drivers currently will report temperatures near UINT_MAX for temperatures below 0°C. This will probably immediately shut the machine down due to overtemperature if started below 0°C. 'long' is 64bit on several architectures. This is not needed since INT_MAX °mC is above the melting point of all known materials. Consistently use a plain 'int' for temperatures throughout the thermal code and the drivers. This only changes the places in the drivers where the temperature is passed around as pointer, when drivers internally use another type this is not changed. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Peter Feuerer <peter@piie.net> Cc: Punit Agrawal <punit.agrawal@arm.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: Jean Delvare <jdelvare@suse.de> Cc: Peter Feuerer <peter@piie.net> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-acpi@vger.kernel.org Cc: platform-driver-x86@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Darren Hart <dvhart@infradead.org> Cc: lm-sensors@lm-sensors.org Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2015-07-24 14:12:54 +08:00
struct thermal_zone_device *tz, int *temp)
{ return -ENODEV; }
static inline int get_tz_trend(struct thermal_zone_device *tz, int trip)
{ return -ENODEV; }
static inline struct thermal_instance *
get_thermal_instance(struct thermal_zone_device *tz,
struct thermal_cooling_device *cdev, int trip)
{ return ERR_PTR(-ENODEV); }
static inline void thermal_cdev_update(struct thermal_cooling_device *cdev)
{ }
static inline void thermal_notify_framework(struct thermal_zone_device *tz,
int trip)
{ }
#endif /* CONFIG_THERMAL */
#if defined(CONFIG_NET) && IS_ENABLED(CONFIG_THERMAL)
extern int thermal_generate_netlink_event(struct thermal_zone_device *tz,
enum events event);
#else
static inline int thermal_generate_netlink_event(struct thermal_zone_device *tz,
enum events event)
{
return 0;
}
#endif
#endif /* __THERMAL_H__ */