UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/gpu/drm/msm/hdmi/hdmi_connector.c

450 lines
12 KiB
C
Raw Normal View History

drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
/*
* Copyright (C) 2013 Red Hat
* Author: Rob Clark <robdclark@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/gpio.h>
drm/msm: split out msm_kms.h Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-12-01 05:12:10 +08:00
#include "msm_kms.h"
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
#include "hdmi.h"
struct hdmi_connector {
drm/msm: convert to drm_bridge Drop the msm_connector base class, and special calls to base class methods from the encoder, and use instead drm_bridge. This allows for a cleaner division between the hdmi (and in future dsi) blocks, from the mdp block. Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-31 01:02:15 +08:00
struct drm_connector base;
struct hdmi *hdmi;
drm/msm: add hdmi support for apq8x74/mdp5 The HDMI block is basically the same between older SoC's with mdp4 display controller, and newer ones with mdp5. So mostly this consists of better abstracting out the different sets of regulators, clks, etc. In particular, for regulators and clks we can split it up by what is needed for hot plug detect to work, and what is needed to light up the display. Also, 8x74 has a new phy.. a very simple one, but split out into a different mmio space. And with mdp5, the irq is shared with mdp, so we don't directly register our own irq handler. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-12-02 01:12:54 +08:00
struct work_struct hpd_work;
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
};
#define to_hdmi_connector(x) container_of(x, struct hdmi_connector, base)
static int gpio_config(struct hdmi *hdmi, bool on)
{
struct drm_device *dev = hdmi->dev;
drm/msm: add hdmi support for apq8x74/mdp5 The HDMI block is basically the same between older SoC's with mdp4 display controller, and newer ones with mdp5. So mostly this consists of better abstracting out the different sets of regulators, clks, etc. In particular, for regulators and clks we can split it up by what is needed for hot plug detect to work, and what is needed to light up the display. Also, 8x74 has a new phy.. a very simple one, but split out into a different mmio space. And with mdp5, the irq is shared with mdp, so we don't directly register our own irq handler. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-12-02 01:12:54 +08:00
const struct hdmi_platform_config *config = hdmi->config;
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
int ret;
if (on) {
ret = gpio_request(config->ddc_clk_gpio, "HDMI_DDC_CLK");
if (ret) {
dev_err(dev->dev, "'%s'(%d) gpio_request failed: %d\n",
"HDMI_DDC_CLK", config->ddc_clk_gpio, ret);
goto error1;
}
drm/msm: add hdmi support for apq8x74/mdp5 The HDMI block is basically the same between older SoC's with mdp4 display controller, and newer ones with mdp5. So mostly this consists of better abstracting out the different sets of regulators, clks, etc. In particular, for regulators and clks we can split it up by what is needed for hot plug detect to work, and what is needed to light up the display. Also, 8x74 has a new phy.. a very simple one, but split out into a different mmio space. And with mdp5, the irq is shared with mdp, so we don't directly register our own irq handler. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-12-02 01:12:54 +08:00
gpio_set_value_cansleep(config->ddc_clk_gpio, 1);
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
ret = gpio_request(config->ddc_data_gpio, "HDMI_DDC_DATA");
if (ret) {
dev_err(dev->dev, "'%s'(%d) gpio_request failed: %d\n",
"HDMI_DDC_DATA", config->ddc_data_gpio, ret);
goto error2;
}
drm/msm: add hdmi support for apq8x74/mdp5 The HDMI block is basically the same between older SoC's with mdp4 display controller, and newer ones with mdp5. So mostly this consists of better abstracting out the different sets of regulators, clks, etc. In particular, for regulators and clks we can split it up by what is needed for hot plug detect to work, and what is needed to light up the display. Also, 8x74 has a new phy.. a very simple one, but split out into a different mmio space. And with mdp5, the irq is shared with mdp, so we don't directly register our own irq handler. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-12-02 01:12:54 +08:00
gpio_set_value_cansleep(config->ddc_data_gpio, 1);
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
ret = gpio_request(config->hpd_gpio, "HDMI_HPD");
if (ret) {
dev_err(dev->dev, "'%s'(%d) gpio_request failed: %d\n",
"HDMI_HPD", config->hpd_gpio, ret);
goto error3;
}
drm/msm: add hdmi support for apq8x74/mdp5 The HDMI block is basically the same between older SoC's with mdp4 display controller, and newer ones with mdp5. So mostly this consists of better abstracting out the different sets of regulators, clks, etc. In particular, for regulators and clks we can split it up by what is needed for hot plug detect to work, and what is needed to light up the display. Also, 8x74 has a new phy.. a very simple one, but split out into a different mmio space. And with mdp5, the irq is shared with mdp, so we don't directly register our own irq handler. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-12-02 01:12:54 +08:00
gpio_direction_input(config->hpd_gpio);
gpio_set_value_cansleep(config->hpd_gpio, 1);
if (config->mux_en_gpio != -1) {
ret = gpio_request(config->mux_en_gpio, "HDMI_MUX_EN");
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
if (ret) {
dev_err(dev->dev, "'%s'(%d) gpio_request failed: %d\n",
drm/msm/hdmi: fix HDMI_MUX_EN gpio request typo HDMI_MUX_EN gpio is requested. If an error occurs, the same name should be printed (HDMI_MUX_EN) instead of HDMI_MUX_SEL (typo). Signed-off-by: Beeresh Gopal <gbeeresh@codeaurora.org> Signed-off-by: Stephane Viau <sviau@codeaurora.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-07-31 23:48:50 +08:00
"HDMI_MUX_EN", config->mux_en_gpio, ret);
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
goto error4;
}
drm/msm: add hdmi support for apq8x74/mdp5 The HDMI block is basically the same between older SoC's with mdp4 display controller, and newer ones with mdp5. So mostly this consists of better abstracting out the different sets of regulators, clks, etc. In particular, for regulators and clks we can split it up by what is needed for hot plug detect to work, and what is needed to light up the display. Also, 8x74 has a new phy.. a very simple one, but split out into a different mmio space. And with mdp5, the irq is shared with mdp, so we don't directly register our own irq handler. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-12-02 01:12:54 +08:00
gpio_set_value_cansleep(config->mux_en_gpio, 1);
}
if (config->mux_sel_gpio != -1) {
ret = gpio_request(config->mux_sel_gpio, "HDMI_MUX_SEL");
if (ret) {
dev_err(dev->dev, "'%s'(%d) gpio_request failed: %d\n",
"HDMI_MUX_SEL", config->mux_sel_gpio, ret);
goto error5;
}
gpio_set_value_cansleep(config->mux_sel_gpio, 0);
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
}
drm/msm/hdmi: enable lpm-mux if it is present lpm-mux is programmed to enable HDMI connector on the docking station for S805 chipset based devices. Signed-off-by: Beeresh Gopal <gbeeresh@codeaurora.org> Signed-off-by: Stephane Viau <sviau@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-07-31 23:48:49 +08:00
if (config->mux_lpm_gpio != -1) {
ret = gpio_request(config->mux_lpm_gpio,
"HDMI_MUX_LPM");
if (ret) {
dev_err(dev->dev,
"'%s'(%d) gpio_request failed: %d\n",
"HDMI_MUX_LPM",
config->mux_lpm_gpio, ret);
goto error6;
}
gpio_set_value_cansleep(config->mux_lpm_gpio, 1);
}
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
DBG("gpio on");
} else {
gpio_free(config->ddc_clk_gpio);
gpio_free(config->ddc_data_gpio);
gpio_free(config->hpd_gpio);
drm/msm: add hdmi support for apq8x74/mdp5 The HDMI block is basically the same between older SoC's with mdp4 display controller, and newer ones with mdp5. So mostly this consists of better abstracting out the different sets of regulators, clks, etc. In particular, for regulators and clks we can split it up by what is needed for hot plug detect to work, and what is needed to light up the display. Also, 8x74 has a new phy.. a very simple one, but split out into a different mmio space. And with mdp5, the irq is shared with mdp, so we don't directly register our own irq handler. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-12-02 01:12:54 +08:00
if (config->mux_en_gpio != -1) {
gpio_set_value_cansleep(config->mux_en_gpio, 0);
gpio_free(config->mux_en_gpio);
}
if (config->mux_sel_gpio != -1) {
gpio_set_value_cansleep(config->mux_sel_gpio, 1);
gpio_free(config->mux_sel_gpio);
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
}
drm/msm/hdmi: enable lpm-mux if it is present lpm-mux is programmed to enable HDMI connector on the docking station for S805 chipset based devices. Signed-off-by: Beeresh Gopal <gbeeresh@codeaurora.org> Signed-off-by: Stephane Viau <sviau@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-07-31 23:48:49 +08:00
if (config->mux_lpm_gpio != -1) {
gpio_set_value_cansleep(config->mux_lpm_gpio, 0);
gpio_free(config->mux_lpm_gpio);
}
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
DBG("gpio off");
}
return 0;
drm/msm/hdmi: enable lpm-mux if it is present lpm-mux is programmed to enable HDMI connector on the docking station for S805 chipset based devices. Signed-off-by: Beeresh Gopal <gbeeresh@codeaurora.org> Signed-off-by: Stephane Viau <sviau@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-07-31 23:48:49 +08:00
error6:
if (config->mux_sel_gpio != -1)
gpio_free(config->mux_sel_gpio);
drm/msm: add hdmi support for apq8x74/mdp5 The HDMI block is basically the same between older SoC's with mdp4 display controller, and newer ones with mdp5. So mostly this consists of better abstracting out the different sets of regulators, clks, etc. In particular, for regulators and clks we can split it up by what is needed for hot plug detect to work, and what is needed to light up the display. Also, 8x74 has a new phy.. a very simple one, but split out into a different mmio space. And with mdp5, the irq is shared with mdp, so we don't directly register our own irq handler. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-12-02 01:12:54 +08:00
error5:
if (config->mux_en_gpio != -1)
gpio_free(config->mux_en_gpio);
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
error4:
gpio_free(config->hpd_gpio);
error3:
gpio_free(config->ddc_data_gpio);
error2:
gpio_free(config->ddc_clk_gpio);
error1:
return ret;
}
static int hpd_enable(struct hdmi_connector *hdmi_connector)
{
drm/msm: convert to drm_bridge Drop the msm_connector base class, and special calls to base class methods from the encoder, and use instead drm_bridge. This allows for a cleaner division between the hdmi (and in future dsi) blocks, from the mdp block. Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-31 01:02:15 +08:00
struct hdmi *hdmi = hdmi_connector->hdmi;
drm/msm: add hdmi support for apq8x74/mdp5 The HDMI block is basically the same between older SoC's with mdp4 display controller, and newer ones with mdp5. So mostly this consists of better abstracting out the different sets of regulators, clks, etc. In particular, for regulators and clks we can split it up by what is needed for hot plug detect to work, and what is needed to light up the display. Also, 8x74 has a new phy.. a very simple one, but split out into a different mmio space. And with mdp5, the irq is shared with mdp, so we don't directly register our own irq handler. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-12-02 01:12:54 +08:00
const struct hdmi_platform_config *config = hdmi->config;
drm/msm: convert to drm_bridge Drop the msm_connector base class, and special calls to base class methods from the encoder, and use instead drm_bridge. This allows for a cleaner division between the hdmi (and in future dsi) blocks, from the mdp block. Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-31 01:02:15 +08:00
struct drm_device *dev = hdmi_connector->base.dev;
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
struct hdmi_phy *phy = hdmi->phy;
uint32_t hpd_ctrl;
drm/msm: add hdmi support for apq8x74/mdp5 The HDMI block is basically the same between older SoC's with mdp4 display controller, and newer ones with mdp5. So mostly this consists of better abstracting out the different sets of regulators, clks, etc. In particular, for regulators and clks we can split it up by what is needed for hot plug detect to work, and what is needed to light up the display. Also, 8x74 has a new phy.. a very simple one, but split out into a different mmio space. And with mdp5, the irq is shared with mdp, so we don't directly register our own irq handler. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-12-02 01:12:54 +08:00
int i, ret;
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
drm/msm/hdmi: enable regulators before clocks to avoid warnings HPD regulators need to be enabled before clocks, otherwise clock driver will report warning. Signed-off-by: Jilai Wang <jilaiw@codeaurora.org>
2014-12-02 04:10:37 +08:00
for (i = 0; i < config->hpd_reg_cnt; i++) {
ret = regulator_enable(hdmi->hpd_regs[i]);
if (ret) {
dev_err(dev->dev, "failed to enable hpd regulator: %s (%d)\n",
config->hpd_reg_names[i], ret);
goto fail;
}
}
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
ret = gpio_config(hdmi, true);
if (ret) {
dev_err(dev->dev, "failed to configure GPIOs: %d\n", ret);
goto fail;
}
drm/msm: add hdmi support for apq8x74/mdp5 The HDMI block is basically the same between older SoC's with mdp4 display controller, and newer ones with mdp5. So mostly this consists of better abstracting out the different sets of regulators, clks, etc. In particular, for regulators and clks we can split it up by what is needed for hot plug detect to work, and what is needed to light up the display. Also, 8x74 has a new phy.. a very simple one, but split out into a different mmio space. And with mdp5, the irq is shared with mdp, so we don't directly register our own irq handler. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-12-02 01:12:54 +08:00
for (i = 0; i < config->hpd_clk_cnt; i++) {
drm/msm/hdmi: set hdp clock rate before prepare_enable The clock driver usually complains when a clock is being prepared before setting its rate. It is the case here for "core_clk" which needs to be set at 19.2 MHz before we attempt a prepare_enable(). Signed-off-by: Stephane Viau <sviau@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-06-06 22:03:32 +08:00
if (config->hpd_freq && config->hpd_freq[i]) {
ret = clk_set_rate(hdmi->hpd_clks[i],
config->hpd_freq[i]);
if (ret)
dev_warn(dev->dev, "failed to set clk %s (%d)\n",
config->hpd_clk_names[i], ret);
}
drm/msm: add hdmi support for apq8x74/mdp5 The HDMI block is basically the same between older SoC's with mdp4 display controller, and newer ones with mdp5. So mostly this consists of better abstracting out the different sets of regulators, clks, etc. In particular, for regulators and clks we can split it up by what is needed for hot plug detect to work, and what is needed to light up the display. Also, 8x74 has a new phy.. a very simple one, but split out into a different mmio space. And with mdp5, the irq is shared with mdp, so we don't directly register our own irq handler. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-12-02 01:12:54 +08:00
ret = clk_prepare_enable(hdmi->hpd_clks[i]);
if (ret) {
dev_err(dev->dev, "failed to enable hpd clk: %s (%d)\n",
config->hpd_clk_names[i], ret);
goto fail;
}
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
}
hdmi_set_mode(hdmi, false);
phy->funcs->reset(phy);
hdmi_set_mode(hdmi, true);
hdmi_write(hdmi, REG_HDMI_USEC_REFTIMER, 0x0001001b);
/* enable HPD events: */
hdmi_write(hdmi, REG_HDMI_HPD_INT_CTRL,
HDMI_HPD_INT_CTRL_INT_CONNECT |
HDMI_HPD_INT_CTRL_INT_EN);
/* set timeout to 4.1ms (max) for hardware debounce */
hpd_ctrl = hdmi_read(hdmi, REG_HDMI_HPD_CTRL);
hpd_ctrl |= HDMI_HPD_CTRL_TIMEOUT(0x1fff);
/* Toggle HPD circuit to trigger HPD sense */
hdmi_write(hdmi, REG_HDMI_HPD_CTRL,
~HDMI_HPD_CTRL_ENABLE & hpd_ctrl);
hdmi_write(hdmi, REG_HDMI_HPD_CTRL,
HDMI_HPD_CTRL_ENABLE | hpd_ctrl);
return 0;
fail:
return ret;
}
drm/msm/hdmi: enable regulators before clocks to avoid warnings HPD regulators need to be enabled before clocks, otherwise clock driver will report warning. Signed-off-by: Jilai Wang <jilaiw@codeaurora.org>
2014-12-02 04:10:37 +08:00
static void hdp_disable(struct hdmi_connector *hdmi_connector)
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
{
drm/msm: convert to drm_bridge Drop the msm_connector base class, and special calls to base class methods from the encoder, and use instead drm_bridge. This allows for a cleaner division between the hdmi (and in future dsi) blocks, from the mdp block. Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-31 01:02:15 +08:00
struct hdmi *hdmi = hdmi_connector->hdmi;
drm/msm: add hdmi support for apq8x74/mdp5 The HDMI block is basically the same between older SoC's with mdp4 display controller, and newer ones with mdp5. So mostly this consists of better abstracting out the different sets of regulators, clks, etc. In particular, for regulators and clks we can split it up by what is needed for hot plug detect to work, and what is needed to light up the display. Also, 8x74 has a new phy.. a very simple one, but split out into a different mmio space. And with mdp5, the irq is shared with mdp, so we don't directly register our own irq handler. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-12-02 01:12:54 +08:00
const struct hdmi_platform_config *config = hdmi->config;
drm/msm: convert to drm_bridge Drop the msm_connector base class, and special calls to base class methods from the encoder, and use instead drm_bridge. This allows for a cleaner division between the hdmi (and in future dsi) blocks, from the mdp block. Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-31 01:02:15 +08:00
struct drm_device *dev = hdmi_connector->base.dev;
drm/msm: add hdmi support for apq8x74/mdp5 The HDMI block is basically the same between older SoC's with mdp4 display controller, and newer ones with mdp5. So mostly this consists of better abstracting out the different sets of regulators, clks, etc. In particular, for regulators and clks we can split it up by what is needed for hot plug detect to work, and what is needed to light up the display. Also, 8x74 has a new phy.. a very simple one, but split out into a different mmio space. And with mdp5, the irq is shared with mdp, so we don't directly register our own irq handler. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-12-02 01:12:54 +08:00
int i, ret = 0;
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
/* Disable HPD interrupt */
hdmi_write(hdmi, REG_HDMI_HPD_INT_CTRL, 0);
hdmi_set_mode(hdmi, false);
drm/msm: add hdmi support for apq8x74/mdp5 The HDMI block is basically the same between older SoC's with mdp4 display controller, and newer ones with mdp5. So mostly this consists of better abstracting out the different sets of regulators, clks, etc. In particular, for regulators and clks we can split it up by what is needed for hot plug detect to work, and what is needed to light up the display. Also, 8x74 has a new phy.. a very simple one, but split out into a different mmio space. And with mdp5, the irq is shared with mdp, so we don't directly register our own irq handler. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-12-02 01:12:54 +08:00
for (i = 0; i < config->hpd_clk_cnt; i++)
clk_disable_unprepare(hdmi->hpd_clks[i]);
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
ret = gpio_config(hdmi, false);
drm/msm/hdmi: enable regulators before clocks to avoid warnings HPD regulators need to be enabled before clocks, otherwise clock driver will report warning. Signed-off-by: Jilai Wang <jilaiw@codeaurora.org>
2014-12-02 04:10:37 +08:00
if (ret)
dev_warn(dev->dev, "failed to unconfigure GPIOs: %d\n", ret);
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
drm/msm/hdmi: enable regulators before clocks to avoid warnings HPD regulators need to be enabled before clocks, otherwise clock driver will report warning. Signed-off-by: Jilai Wang <jilaiw@codeaurora.org>
2014-12-02 04:10:37 +08:00
for (i = 0; i < config->hpd_reg_cnt; i++) {
ret = regulator_disable(hdmi->hpd_regs[i]);
if (ret)
dev_warn(dev->dev, "failed to disable hpd regulator: %s (%d)\n",
config->hpd_reg_names[i], ret);
}
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
}
drm/msm: add hdmi support for apq8x74/mdp5 The HDMI block is basically the same between older SoC's with mdp4 display controller, and newer ones with mdp5. So mostly this consists of better abstracting out the different sets of regulators, clks, etc. In particular, for regulators and clks we can split it up by what is needed for hot plug detect to work, and what is needed to light up the display. Also, 8x74 has a new phy.. a very simple one, but split out into a different mmio space. And with mdp5, the irq is shared with mdp, so we don't directly register our own irq handler. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-12-02 01:12:54 +08:00
static void
hotplug_work(struct work_struct *work)
{
struct hdmi_connector *hdmi_connector =
container_of(work, struct hdmi_connector, hpd_work);
struct drm_connector *connector = &hdmi_connector->base;
drm_helper_hpd_irq_event(connector->dev);
}
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
void hdmi_connector_irq(struct drm_connector *connector)
{
drm/msm: convert to drm_bridge Drop the msm_connector base class, and special calls to base class methods from the encoder, and use instead drm_bridge. This allows for a cleaner division between the hdmi (and in future dsi) blocks, from the mdp block. Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-31 01:02:15 +08:00
struct hdmi_connector *hdmi_connector = to_hdmi_connector(connector);
drm/msm: add hdmi support for apq8x74/mdp5 The HDMI block is basically the same between older SoC's with mdp4 display controller, and newer ones with mdp5. So mostly this consists of better abstracting out the different sets of regulators, clks, etc. In particular, for regulators and clks we can split it up by what is needed for hot plug detect to work, and what is needed to light up the display. Also, 8x74 has a new phy.. a very simple one, but split out into a different mmio space. And with mdp5, the irq is shared with mdp, so we don't directly register our own irq handler. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-12-02 01:12:54 +08:00
struct msm_drm_private *priv = connector->dev->dev_private;
drm/msm: convert to drm_bridge Drop the msm_connector base class, and special calls to base class methods from the encoder, and use instead drm_bridge. This allows for a cleaner division between the hdmi (and in future dsi) blocks, from the mdp block. Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-31 01:02:15 +08:00
struct hdmi *hdmi = hdmi_connector->hdmi;
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
uint32_t hpd_int_status, hpd_int_ctrl;
/* Process HPD: */
hpd_int_status = hdmi_read(hdmi, REG_HDMI_HPD_INT_STATUS);
hpd_int_ctrl = hdmi_read(hdmi, REG_HDMI_HPD_INT_CTRL);
if ((hpd_int_ctrl & HDMI_HPD_INT_CTRL_INT_EN) &&
(hpd_int_status & HDMI_HPD_INT_STATUS_INT)) {
bool detected = !!(hpd_int_status & HDMI_HPD_INT_STATUS_CABLE_DETECTED);
DBG("status=%04x, ctrl=%04x", hpd_int_status, hpd_int_ctrl);
/* ack the irq: */
hdmi_write(hdmi, REG_HDMI_HPD_INT_CTRL,
hpd_int_ctrl | HDMI_HPD_INT_CTRL_INT_ACK);
/* detect disconnect if we are connected or visa versa: */
hpd_int_ctrl = HDMI_HPD_INT_CTRL_INT_EN;
if (!detected)
hpd_int_ctrl |= HDMI_HPD_INT_CTRL_INT_CONNECT;
hdmi_write(hdmi, REG_HDMI_HPD_INT_CTRL, hpd_int_ctrl);
drm/msm: add hdmi support for apq8x74/mdp5 The HDMI block is basically the same between older SoC's with mdp4 display controller, and newer ones with mdp5. So mostly this consists of better abstracting out the different sets of regulators, clks, etc. In particular, for regulators and clks we can split it up by what is needed for hot plug detect to work, and what is needed to light up the display. Also, 8x74 has a new phy.. a very simple one, but split out into a different mmio space. And with mdp5, the irq is shared with mdp, so we don't directly register our own irq handler. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-12-02 01:12:54 +08:00
queue_work(priv->wq, &hdmi_connector->hpd_work);
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
}
}
drm/msm/hdmi: use gpio and HPD polling The hotplug detect and irq does not seem to be reliable on all devices for some reason. For now it is more reliable to use polling, and give preference to raw gpio status if it disagrees with the debounced hpd status. Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-05-20 01:53:20 +08:00
static enum drm_connector_status detect_reg(struct hdmi *hdmi)
{
uint32_t hpd_int_status = hdmi_read(hdmi, REG_HDMI_HPD_INT_STATUS);
return (hpd_int_status & HDMI_HPD_INT_STATUS_CABLE_DETECTED) ?
connector_status_connected : connector_status_disconnected;
}
static enum drm_connector_status detect_gpio(struct hdmi *hdmi)
{
const struct hdmi_platform_config *config = hdmi->config;
return gpio_get_value(config->hpd_gpio) ?
connector_status_connected :
connector_status_disconnected;
}
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
static enum drm_connector_status hdmi_connector_detect(
struct drm_connector *connector, bool force)
{
drm/msm: convert to drm_bridge Drop the msm_connector base class, and special calls to base class methods from the encoder, and use instead drm_bridge. This allows for a cleaner division between the hdmi (and in future dsi) blocks, from the mdp block. Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-31 01:02:15 +08:00
struct hdmi_connector *hdmi_connector = to_hdmi_connector(connector);
struct hdmi *hdmi = hdmi_connector->hdmi;
drm/msm/hdmi: use gpio and HPD polling The hotplug detect and irq does not seem to be reliable on all devices for some reason. For now it is more reliable to use polling, and give preference to raw gpio status if it disagrees with the debounced hpd status. Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-05-20 01:53:20 +08:00
enum drm_connector_status stat_gpio, stat_reg;
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
int retry = 20;
drm/msm/hdmi: use gpio and HPD polling The hotplug detect and irq does not seem to be reliable on all devices for some reason. For now it is more reliable to use polling, and give preference to raw gpio status if it disagrees with the debounced hpd status. Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-05-20 01:53:20 +08:00
do {
stat_gpio = detect_gpio(hdmi);
stat_reg = detect_reg(hdmi);
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
drm/msm/hdmi: use gpio and HPD polling The hotplug detect and irq does not seem to be reliable on all devices for some reason. For now it is more reliable to use polling, and give preference to raw gpio status if it disagrees with the debounced hpd status. Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-05-20 01:53:20 +08:00
if (stat_gpio == stat_reg)
drm/msm: add hdmi support for apq8x74/mdp5 The HDMI block is basically the same between older SoC's with mdp4 display controller, and newer ones with mdp5. So mostly this consists of better abstracting out the different sets of regulators, clks, etc. In particular, for regulators and clks we can split it up by what is needed for hot plug detect to work, and what is needed to light up the display. Also, 8x74 has a new phy.. a very simple one, but split out into a different mmio space. And with mdp5, the irq is shared with mdp, so we don't directly register our own irq handler. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-12-02 01:12:54 +08:00
break;
drm/msm/hdmi: use gpio and HPD polling The hotplug detect and irq does not seem to be reliable on all devices for some reason. For now it is more reliable to use polling, and give preference to raw gpio status if it disagrees with the debounced hpd status. Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-05-20 01:53:20 +08:00
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
mdelay(10);
drm/msm/hdmi: use gpio and HPD polling The hotplug detect and irq does not seem to be reliable on all devices for some reason. For now it is more reliable to use polling, and give preference to raw gpio status if it disagrees with the debounced hpd status. Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-05-20 01:53:20 +08:00
} while (--retry);
/* the status we get from reading gpio seems to be more reliable,
* so trust that one the most if we didn't manage to get hdmi and
* gpio status to agree:
*/
if (stat_gpio != stat_reg) {
DBG("HDMI_HPD_INT_STATUS tells us: %d", stat_reg);
DBG("hpd gpio tells us: %d", stat_gpio);
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
}
drm/msm/hdmi: use gpio and HPD polling The hotplug detect and irq does not seem to be reliable on all devices for some reason. For now it is more reliable to use polling, and give preference to raw gpio status if it disagrees with the debounced hpd status. Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-05-20 01:53:20 +08:00
return stat_gpio;
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
}
static void hdmi_connector_destroy(struct drm_connector *connector)
{
drm/msm: convert to drm_bridge Drop the msm_connector base class, and special calls to base class methods from the encoder, and use instead drm_bridge. This allows for a cleaner division between the hdmi (and in future dsi) blocks, from the mdp block. Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-31 01:02:15 +08:00
struct hdmi_connector *hdmi_connector = to_hdmi_connector(connector);
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
hdp_disable(hdmi_connector);
drm: add register and unregister functions for connectors Introduce generic functions to register and unregister connectors. This provides a common place to add and remove associated user space interfaces. Signed-off-by: Thomas Wood <thomas.wood@intel.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-29 23:57:41 +08:00
drm_connector_unregister(connector);
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
drm_connector_cleanup(connector);
kfree(hdmi_connector);
}
static int hdmi_connector_get_modes(struct drm_connector *connector)
{
drm/msm: convert to drm_bridge Drop the msm_connector base class, and special calls to base class methods from the encoder, and use instead drm_bridge. This allows for a cleaner division between the hdmi (and in future dsi) blocks, from the mdp block. Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-31 01:02:15 +08:00
struct hdmi_connector *hdmi_connector = to_hdmi_connector(connector);
struct hdmi *hdmi = hdmi_connector->hdmi;
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
struct edid *edid;
uint32_t hdmi_ctrl;
int ret = 0;
hdmi_ctrl = hdmi_read(hdmi, REG_HDMI_CTRL);
hdmi_write(hdmi, REG_HDMI_CTRL, hdmi_ctrl | HDMI_CTRL_ENABLE);
edid = drm_get_edid(connector, hdmi->i2c);
hdmi_write(hdmi, REG_HDMI_CTRL, hdmi_ctrl);
drm_mode_connector_update_edid_property(connector, edid);
if (edid) {
ret = drm_add_edid_modes(connector, edid);
kfree(edid);
}
return ret;
}
static int hdmi_connector_mode_valid(struct drm_connector *connector,
struct drm_display_mode *mode)
{
drm/msm: convert to drm_bridge Drop the msm_connector base class, and special calls to base class methods from the encoder, and use instead drm_bridge. This allows for a cleaner division between the hdmi (and in future dsi) blocks, from the mdp block. Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-31 01:02:15 +08:00
struct hdmi_connector *hdmi_connector = to_hdmi_connector(connector);
drm/msm: add hdmi support for apq8x74/mdp5 The HDMI block is basically the same between older SoC's with mdp4 display controller, and newer ones with mdp5. So mostly this consists of better abstracting out the different sets of regulators, clks, etc. In particular, for regulators and clks we can split it up by what is needed for hot plug detect to work, and what is needed to light up the display. Also, 8x74 has a new phy.. a very simple one, but split out into a different mmio space. And with mdp5, the irq is shared with mdp, so we don't directly register our own irq handler. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-12-02 01:12:54 +08:00
struct hdmi *hdmi = hdmi_connector->hdmi;
const struct hdmi_platform_config *config = hdmi->config;
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
struct msm_drm_private *priv = connector->dev->dev_private;
struct msm_kms *kms = priv->kms;
long actual, requested;
requested = 1000 * mode->clock;
actual = kms->funcs->round_pixclk(kms,
drm/msm: convert to drm_bridge Drop the msm_connector base class, and special calls to base class methods from the encoder, and use instead drm_bridge. This allows for a cleaner division between the hdmi (and in future dsi) blocks, from the mdp block. Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-31 01:02:15 +08:00
requested, hdmi_connector->hdmi->encoder);
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
drm/msm: add hdmi support for apq8x74/mdp5 The HDMI block is basically the same between older SoC's with mdp4 display controller, and newer ones with mdp5. So mostly this consists of better abstracting out the different sets of regulators, clks, etc. In particular, for regulators and clks we can split it up by what is needed for hot plug detect to work, and what is needed to light up the display. Also, 8x74 has a new phy.. a very simple one, but split out into a different mmio space. And with mdp5, the irq is shared with mdp, so we don't directly register our own irq handler. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-12-02 01:12:54 +08:00
/* for mdp5/apq8074, we manage our own pixel clk (as opposed to
* mdp4/dtv stuff where pixel clk is assigned to mdp/encoder
* instead):
*/
if (config->pwr_clk_cnt > 0)
actual = clk_round_rate(hdmi->pwr_clks[0], actual);
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
DBG("requested=%ld, actual=%ld", requested, actual);
if (actual != requested)
return MODE_CLOCK_RANGE;
return 0;
}
drm/msm: convert to drm_bridge Drop the msm_connector base class, and special calls to base class methods from the encoder, and use instead drm_bridge. This allows for a cleaner division between the hdmi (and in future dsi) blocks, from the mdp block. Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-31 01:02:15 +08:00
static struct drm_encoder *
hdmi_connector_best_encoder(struct drm_connector *connector)
{
struct hdmi_connector *hdmi_connector = to_hdmi_connector(connector);
return hdmi_connector->hdmi->encoder;
}
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
static const struct drm_connector_funcs hdmi_connector_funcs = {
.dpms = drm_helper_connector_dpms,
.detect = hdmi_connector_detect,
.fill_modes = drm_helper_probe_single_connector_modes,
.destroy = hdmi_connector_destroy,
drm/msm/hdmi: atomic Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-11-09 02:23:07 +08:00
.reset = drm_atomic_helper_connector_reset,
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
};
static const struct drm_connector_helper_funcs hdmi_connector_helper_funcs = {
.get_modes = hdmi_connector_get_modes,
.mode_valid = hdmi_connector_mode_valid,
drm/msm: convert to drm_bridge Drop the msm_connector base class, and special calls to base class methods from the encoder, and use instead drm_bridge. This allows for a cleaner division between the hdmi (and in future dsi) blocks, from the mdp block. Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-31 01:02:15 +08:00
.best_encoder = hdmi_connector_best_encoder,
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
};
/* initialize connector */
drm/msm: convert to drm_bridge Drop the msm_connector base class, and special calls to base class methods from the encoder, and use instead drm_bridge. This allows for a cleaner division between the hdmi (and in future dsi) blocks, from the mdp block. Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-31 01:02:15 +08:00
struct drm_connector *hdmi_connector_init(struct hdmi *hdmi)
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
{
struct drm_connector *connector = NULL;
struct hdmi_connector *hdmi_connector;
int ret;
hdmi_connector = kzalloc(sizeof(*hdmi_connector), GFP_KERNEL);
if (!hdmi_connector) {
ret = -ENOMEM;
goto fail;
}
drm/msm/hdmi: remove useless kref A left-over from prior to component framework. The original intent was to deal with hdmi getting unloaded before the master component, but that isn't really going to work anyways. These days with the component framework taking care to unload the master component first, we don't have to worry about this. Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-11-18 21:40:44 +08:00
hdmi_connector->hdmi = hdmi;
drm/msm: add hdmi support for apq8x74/mdp5 The HDMI block is basically the same between older SoC's with mdp4 display controller, and newer ones with mdp5. So mostly this consists of better abstracting out the different sets of regulators, clks, etc. In particular, for regulators and clks we can split it up by what is needed for hot plug detect to work, and what is needed to light up the display. Also, 8x74 has a new phy.. a very simple one, but split out into a different mmio space. And with mdp5, the irq is shared with mdp, so we don't directly register our own irq handler. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-12-02 01:12:54 +08:00
INIT_WORK(&hdmi_connector->hpd_work, hotplug_work);
drm/msm: convert to drm_bridge Drop the msm_connector base class, and special calls to base class methods from the encoder, and use instead drm_bridge. This allows for a cleaner division between the hdmi (and in future dsi) blocks, from the mdp block. Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-31 01:02:15 +08:00
connector = &hdmi_connector->base;
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
drm/msm: convert to drm_bridge Drop the msm_connector base class, and special calls to base class methods from the encoder, and use instead drm_bridge. This allows for a cleaner division between the hdmi (and in future dsi) blocks, from the mdp block. Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-31 01:02:15 +08:00
drm_connector_init(hdmi->dev, connector, &hdmi_connector_funcs,
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
DRM_MODE_CONNECTOR_HDMIA);
drm_connector_helper_add(connector, &hdmi_connector_helper_funcs);
drm/msm/hdmi: use gpio and HPD polling The hotplug detect and irq does not seem to be reliable on all devices for some reason. For now it is more reliable to use polling, and give preference to raw gpio status if it disagrees with the debounced hpd status. Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-05-20 01:53:20 +08:00
connector->polled = DRM_CONNECTOR_POLL_CONNECT |
DRM_CONNECTOR_POLL_DISCONNECT;
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
connector->interlace_allowed = 1;
connector->doublescan_allowed = 0;
drm: add register and unregister functions for connectors Introduce generic functions to register and unregister connectors. This provides a common place to add and remove associated user space interfaces. Signed-off-by: Thomas Wood <thomas.wood@intel.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-05-29 23:57:41 +08:00
drm_connector_register(connector);
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
ret = hpd_enable(hdmi_connector);
if (ret) {
drm/msm: convert to drm_bridge Drop the msm_connector base class, and special calls to base class methods from the encoder, and use instead drm_bridge. This allows for a cleaner division between the hdmi (and in future dsi) blocks, from the mdp block. Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-31 01:02:15 +08:00
dev_err(hdmi->dev->dev, "failed to enable HPD: %d\n", ret);
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
goto fail;
}
drm/msm: convert to drm_bridge Drop the msm_connector base class, and special calls to base class methods from the encoder, and use instead drm_bridge. This allows for a cleaner division between the hdmi (and in future dsi) blocks, from the mdp block. Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-31 01:02:15 +08:00
drm_mode_connector_attach_encoder(connector, hdmi->encoder);
drm/msm: basic KMS driver for snapdragon The snapdragon chips have multiple different display controllers, depending on which chip variant/version. (As far as I can tell, current devices have either MDP3 or MDP4, and upcoming devices have MDSS.) And then external to the display controller are HDMI, DSI, etc. blocks which may be shared across devices which have different display controller blocks. To more easily add support for different display controller blocks, the display controller specific bits are split out into a "kms" module, which provides the kms plane/crtc/encoder objects. The external HDMI, DSI, etc. blocks are part encoder, and part connector currently. But I think I will pull in the drm_bridge patches from chromeos tree, and split them into a bridge+connector, with the registers that need to be set in modeset handled by the bridge. This would remove the 'msm_connector' base class. But some things need to be double checked to make sure I could get the correct ON/OFF sequencing.. This patch adds support for mdp4 crtc (including hw cursor), dtv encoder (part of MDP4 block), and hdmi. Signed-off-by: Rob Clark <robdclark@gmail.com>
2013-06-27 00:44:06 +08:00
return connector;
fail:
if (connector)
hdmi_connector_destroy(connector);
return ERR_PTR(ret);
}