OpenCloudOS-Kernel/drivers/net/8139cp.c

2107 lines
54 KiB
C
Raw Normal View History

/* 8139cp.c: A Linux PCI Ethernet driver for the RealTek 8139C+ chips. */
/*
Copyright 2001-2004 Jeff Garzik <jgarzik@pobox.com>
Copyright (C) 2001, 2002 David S. Miller (davem@redhat.com) [tg3.c]
Copyright (C) 2000, 2001 David S. Miller (davem@redhat.com) [sungem.c]
Copyright 2001 Manfred Spraul [natsemi.c]
Copyright 1999-2001 by Donald Becker. [natsemi.c]
Written 1997-2001 by Donald Becker. [8139too.c]
Copyright 1998-2001 by Jes Sorensen, <jes@trained-monkey.org>. [acenic.c]
This software may be used and distributed according to the terms of
the GNU General Public License (GPL), incorporated herein by reference.
Drivers based on or derived from this code fall under the GPL and must
retain the authorship, copyright and license notice. This file is not
a complete program and may only be used when the entire operating
system is licensed under the GPL.
See the file COPYING in this distribution for more information.
Contributors:
Wake-on-LAN support - Felipe Damasio <felipewd@terra.com.br>
PCI suspend/resume - Felipe Damasio <felipewd@terra.com.br>
LinkChg interrupt - Felipe Damasio <felipewd@terra.com.br>
TODO:
* Test Tx checksumming thoroughly
Low priority TODO:
* Complete reset on PciErr
* Consider Rx interrupt mitigation using TimerIntr
* Investigate using skb->priority with h/w VLAN priority
* Investigate using High Priority Tx Queue with skb->priority
* Adjust Rx FIFO threshold and Max Rx DMA burst on Rx FIFO error
* Adjust Tx FIFO threshold and Max Tx DMA burst on Tx FIFO error
* Implement Tx software interrupt mitigation via
Tx descriptor bit
* The real minimum of CP_MIN_MTU is 4 bytes. However,
for this to be supported, one must(?) turn on packet padding.
* Support external MII transceivers (patch available)
NOTES:
* TX checksumming is considered experimental. It is off by
default, use ethtool to turn it on.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#define DRV_NAME "8139cp"
#define DRV_VERSION "1.3"
#define DRV_RELDATE "Mar 22, 2004"
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h>
#include <linux/compiler.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
#include <linux/ethtool.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/gfp.h>
#include <linux/mii.h>
#include <linux/if_vlan.h>
#include <linux/crc32.h>
#include <linux/in.h>
#include <linux/ip.h>
#include <linux/tcp.h>
#include <linux/udp.h>
#include <linux/cache.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
/* VLAN tagging feature enable/disable */
#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
#define CP_VLAN_TAG_USED 1
#define CP_VLAN_TX_TAG(tx_desc,vlan_tag_value) \
do { (tx_desc)->opts2 = cpu_to_le32(vlan_tag_value); } while (0)
#else
#define CP_VLAN_TAG_USED 0
#define CP_VLAN_TX_TAG(tx_desc,vlan_tag_value) \
do { (tx_desc)->opts2 = 0; } while (0)
#endif
/* These identify the driver base version and may not be removed. */
static char version[] =
DRV_NAME ": 10/100 PCI Ethernet driver v" DRV_VERSION " (" DRV_RELDATE ")\n";
MODULE_AUTHOR("Jeff Garzik <jgarzik@pobox.com>");
MODULE_DESCRIPTION("RealTek RTL-8139C+ series 10/100 PCI Ethernet driver");
MODULE_VERSION(DRV_VERSION);
MODULE_LICENSE("GPL");
static int debug = -1;
module_param(debug, int, 0);
MODULE_PARM_DESC (debug, "8139cp: bitmapped message enable number");
/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
The RTL chips use a 64 element hash table based on the Ethernet CRC. */
static int multicast_filter_limit = 32;
module_param(multicast_filter_limit, int, 0);
MODULE_PARM_DESC (multicast_filter_limit, "8139cp: maximum number of filtered multicast addresses");
#define CP_DEF_MSG_ENABLE (NETIF_MSG_DRV | \
NETIF_MSG_PROBE | \
NETIF_MSG_LINK)
#define CP_NUM_STATS 14 /* struct cp_dma_stats, plus one */
#define CP_STATS_SIZE 64 /* size in bytes of DMA stats block */
#define CP_REGS_SIZE (0xff + 1)
#define CP_REGS_VER 1 /* version 1 */
#define CP_RX_RING_SIZE 64
#define CP_TX_RING_SIZE 64
#define CP_RING_BYTES \
((sizeof(struct cp_desc) * CP_RX_RING_SIZE) + \
(sizeof(struct cp_desc) * CP_TX_RING_SIZE) + \
CP_STATS_SIZE)
#define NEXT_TX(N) (((N) + 1) & (CP_TX_RING_SIZE - 1))
#define NEXT_RX(N) (((N) + 1) & (CP_RX_RING_SIZE - 1))
#define TX_BUFFS_AVAIL(CP) \
(((CP)->tx_tail <= (CP)->tx_head) ? \
(CP)->tx_tail + (CP_TX_RING_SIZE - 1) - (CP)->tx_head : \
(CP)->tx_tail - (CP)->tx_head - 1)
#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/
#define CP_INTERNAL_PHY 32
/* The following settings are log_2(bytes)-4: 0 == 16 bytes .. 6==1024, 7==end of packet. */
#define RX_FIFO_THRESH 5 /* Rx buffer level before first PCI xfer. */
#define RX_DMA_BURST 4 /* Maximum PCI burst, '4' is 256 */
#define TX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */
#define TX_EARLY_THRESH 256 /* Early Tx threshold, in bytes */
/* Time in jiffies before concluding the transmitter is hung. */
#define TX_TIMEOUT (6*HZ)
/* hardware minimum and maximum for a single frame's data payload */
#define CP_MIN_MTU 60 /* TODO: allow lower, but pad */
#define CP_MAX_MTU 4096
enum {
/* NIC register offsets */
MAC0 = 0x00, /* Ethernet hardware address. */
MAR0 = 0x08, /* Multicast filter. */
StatsAddr = 0x10, /* 64-bit start addr of 64-byte DMA stats blk */
TxRingAddr = 0x20, /* 64-bit start addr of Tx ring */
HiTxRingAddr = 0x28, /* 64-bit start addr of high priority Tx ring */
Cmd = 0x37, /* Command register */
IntrMask = 0x3C, /* Interrupt mask */
IntrStatus = 0x3E, /* Interrupt status */
TxConfig = 0x40, /* Tx configuration */
ChipVersion = 0x43, /* 8-bit chip version, inside TxConfig */
RxConfig = 0x44, /* Rx configuration */
RxMissed = 0x4C, /* 24 bits valid, write clears */
Cfg9346 = 0x50, /* EEPROM select/control; Cfg reg [un]lock */
Config1 = 0x52, /* Config1 */
Config3 = 0x59, /* Config3 */
Config4 = 0x5A, /* Config4 */
MultiIntr = 0x5C, /* Multiple interrupt select */
BasicModeCtrl = 0x62, /* MII BMCR */
BasicModeStatus = 0x64, /* MII BMSR */
NWayAdvert = 0x66, /* MII ADVERTISE */
NWayLPAR = 0x68, /* MII LPA */
NWayExpansion = 0x6A, /* MII Expansion */
Config5 = 0xD8, /* Config5 */
TxPoll = 0xD9, /* Tell chip to check Tx descriptors for work */
RxMaxSize = 0xDA, /* Max size of an Rx packet (8169 only) */
CpCmd = 0xE0, /* C+ Command register (C+ mode only) */
IntrMitigate = 0xE2, /* rx/tx interrupt mitigation control */
RxRingAddr = 0xE4, /* 64-bit start addr of Rx ring */
TxThresh = 0xEC, /* Early Tx threshold */
OldRxBufAddr = 0x30, /* DMA address of Rx ring buffer (C mode) */
OldTSD0 = 0x10, /* DMA address of first Tx desc (C mode) */
/* Tx and Rx status descriptors */
DescOwn = (1 << 31), /* Descriptor is owned by NIC */
RingEnd = (1 << 30), /* End of descriptor ring */
FirstFrag = (1 << 29), /* First segment of a packet */
LastFrag = (1 << 28), /* Final segment of a packet */
2005-05-13 07:28:49 +08:00
LargeSend = (1 << 27), /* TCP Large Send Offload (TSO) */
MSSShift = 16, /* MSS value position */
MSSMask = 0xfff, /* MSS value: 11 bits */
TxError = (1 << 23), /* Tx error summary */
RxError = (1 << 20), /* Rx error summary */
IPCS = (1 << 18), /* Calculate IP checksum */
UDPCS = (1 << 17), /* Calculate UDP/IP checksum */
TCPCS = (1 << 16), /* Calculate TCP/IP checksum */
TxVlanTag = (1 << 17), /* Add VLAN tag */
RxVlanTagged = (1 << 16), /* Rx VLAN tag available */
IPFail = (1 << 15), /* IP checksum failed */
UDPFail = (1 << 14), /* UDP/IP checksum failed */
TCPFail = (1 << 13), /* TCP/IP checksum failed */
NormalTxPoll = (1 << 6), /* One or more normal Tx packets to send */
PID1 = (1 << 17), /* 2 protocol id bits: 0==non-IP, */
PID0 = (1 << 16), /* 1==UDP/IP, 2==TCP/IP, 3==IP */
RxProtoTCP = 1,
RxProtoUDP = 2,
RxProtoIP = 3,
TxFIFOUnder = (1 << 25), /* Tx FIFO underrun */
TxOWC = (1 << 22), /* Tx Out-of-window collision */
TxLinkFail = (1 << 21), /* Link failed during Tx of packet */
TxMaxCol = (1 << 20), /* Tx aborted due to excessive collisions */
TxColCntShift = 16, /* Shift, to get 4-bit Tx collision cnt */
TxColCntMask = 0x01 | 0x02 | 0x04 | 0x08, /* 4-bit collision count */
RxErrFrame = (1 << 27), /* Rx frame alignment error */
RxMcast = (1 << 26), /* Rx multicast packet rcv'd */
RxErrCRC = (1 << 18), /* Rx CRC error */
RxErrRunt = (1 << 19), /* Rx error, packet < 64 bytes */
RxErrLong = (1 << 21), /* Rx error, packet > 4096 bytes */
RxErrFIFO = (1 << 22), /* Rx error, FIFO overflowed, pkt bad */
/* StatsAddr register */
DumpStats = (1 << 3), /* Begin stats dump */
/* RxConfig register */
RxCfgFIFOShift = 13, /* Shift, to get Rx FIFO thresh value */
RxCfgDMAShift = 8, /* Shift, to get Rx Max DMA value */
AcceptErr = 0x20, /* Accept packets with CRC errors */
AcceptRunt = 0x10, /* Accept runt (<64 bytes) packets */
AcceptBroadcast = 0x08, /* Accept broadcast packets */
AcceptMulticast = 0x04, /* Accept multicast packets */
AcceptMyPhys = 0x02, /* Accept pkts with our MAC as dest */
AcceptAllPhys = 0x01, /* Accept all pkts w/ physical dest */
/* IntrMask / IntrStatus registers */
PciErr = (1 << 15), /* System error on the PCI bus */
TimerIntr = (1 << 14), /* Asserted when TCTR reaches TimerInt value */
LenChg = (1 << 13), /* Cable length change */
SWInt = (1 << 8), /* Software-requested interrupt */
TxEmpty = (1 << 7), /* No Tx descriptors available */
RxFIFOOvr = (1 << 6), /* Rx FIFO Overflow */
LinkChg = (1 << 5), /* Packet underrun, or link change */
RxEmpty = (1 << 4), /* No Rx descriptors available */
TxErr = (1 << 3), /* Tx error */
TxOK = (1 << 2), /* Tx packet sent */
RxErr = (1 << 1), /* Rx error */
RxOK = (1 << 0), /* Rx packet received */
IntrResvd = (1 << 10), /* reserved, according to RealTek engineers,
but hardware likes to raise it */
IntrAll = PciErr | TimerIntr | LenChg | SWInt | TxEmpty |
RxFIFOOvr | LinkChg | RxEmpty | TxErr | TxOK |
RxErr | RxOK | IntrResvd,
/* C mode command register */
CmdReset = (1 << 4), /* Enable to reset; self-clearing */
RxOn = (1 << 3), /* Rx mode enable */
TxOn = (1 << 2), /* Tx mode enable */
/* C+ mode command register */
RxVlanOn = (1 << 6), /* Rx VLAN de-tagging enable */
RxChkSum = (1 << 5), /* Rx checksum offload enable */
PCIDAC = (1 << 4), /* PCI Dual Address Cycle (64-bit PCI) */
PCIMulRW = (1 << 3), /* Enable PCI read/write multiple */
CpRxOn = (1 << 1), /* Rx mode enable */
CpTxOn = (1 << 0), /* Tx mode enable */
/* Cfg9436 EEPROM control register */
Cfg9346_Lock = 0x00, /* Lock ConfigX/MII register access */
Cfg9346_Unlock = 0xC0, /* Unlock ConfigX/MII register access */
/* TxConfig register */
IFG = (1 << 25) | (1 << 24), /* standard IEEE interframe gap */
TxDMAShift = 8, /* DMA burst value (0-7) is shift this many bits */
/* Early Tx Threshold register */
TxThreshMask = 0x3f, /* Mask bits 5-0 */
TxThreshMax = 2048, /* Max early Tx threshold */
/* Config1 register */
DriverLoaded = (1 << 5), /* Software marker, driver is loaded */
LWACT = (1 << 4), /* LWAKE active mode */
PMEnable = (1 << 0), /* Enable various PM features of chip */
/* Config3 register */
PARMEnable = (1 << 6), /* Enable auto-loading of PHY parms */
MagicPacket = (1 << 5), /* Wake up when receives a Magic Packet */
LinkUp = (1 << 4), /* Wake up when the cable connection is re-established */
/* Config4 register */
LWPTN = (1 << 1), /* LWAKE Pattern */
LWPME = (1 << 4), /* LANWAKE vs PMEB */
/* Config5 register */
BWF = (1 << 6), /* Accept Broadcast wakeup frame */
MWF = (1 << 5), /* Accept Multicast wakeup frame */
UWF = (1 << 4), /* Accept Unicast wakeup frame */
LANWake = (1 << 1), /* Enable LANWake signal */
PMEStatus = (1 << 0), /* PME status can be reset by PCI RST# */
cp_norx_intr_mask = PciErr | LinkChg | TxOK | TxErr | TxEmpty,
cp_rx_intr_mask = RxOK | RxErr | RxEmpty | RxFIFOOvr,
cp_intr_mask = cp_rx_intr_mask | cp_norx_intr_mask,
};
static const unsigned int cp_rx_config =
(RX_FIFO_THRESH << RxCfgFIFOShift) |
(RX_DMA_BURST << RxCfgDMAShift);
struct cp_desc {
__le32 opts1;
__le32 opts2;
__le64 addr;
};
struct cp_dma_stats {
__le64 tx_ok;
__le64 rx_ok;
__le64 tx_err;
__le32 rx_err;
__le16 rx_fifo;
__le16 frame_align;
__le32 tx_ok_1col;
__le32 tx_ok_mcol;
__le64 rx_ok_phys;
__le64 rx_ok_bcast;
__le32 rx_ok_mcast;
__le16 tx_abort;
__le16 tx_underrun;
} __attribute__((packed));
struct cp_extra_stats {
unsigned long rx_frags;
};
struct cp_private {
void __iomem *regs;
struct net_device *dev;
spinlock_t lock;
u32 msg_enable;
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
struct napi_struct napi;
struct pci_dev *pdev;
u32 rx_config;
u16 cpcmd;
struct cp_extra_stats cp_stats;
unsigned rx_head ____cacheline_aligned;
unsigned rx_tail;
struct cp_desc *rx_ring;
struct sk_buff *rx_skb[CP_RX_RING_SIZE];
unsigned tx_head ____cacheline_aligned;
unsigned tx_tail;
struct cp_desc *tx_ring;
struct sk_buff *tx_skb[CP_TX_RING_SIZE];
unsigned rx_buf_sz;
unsigned wol_enabled : 1; /* Is Wake-on-LAN enabled? */
#if CP_VLAN_TAG_USED
struct vlan_group *vlgrp;
#endif
dma_addr_t ring_dma;
struct mii_if_info mii_if;
};
#define cpr8(reg) readb(cp->regs + (reg))
#define cpr16(reg) readw(cp->regs + (reg))
#define cpr32(reg) readl(cp->regs + (reg))
#define cpw8(reg,val) writeb((val), cp->regs + (reg))
#define cpw16(reg,val) writew((val), cp->regs + (reg))
#define cpw32(reg,val) writel((val), cp->regs + (reg))
#define cpw8_f(reg,val) do { \
writeb((val), cp->regs + (reg)); \
readb(cp->regs + (reg)); \
} while (0)
#define cpw16_f(reg,val) do { \
writew((val), cp->regs + (reg)); \
readw(cp->regs + (reg)); \
} while (0)
#define cpw32_f(reg,val) do { \
writel((val), cp->regs + (reg)); \
readl(cp->regs + (reg)); \
} while (0)
static void __cp_set_rx_mode (struct net_device *dev);
static void cp_tx (struct cp_private *cp);
static void cp_clean_rings (struct cp_private *cp);
#ifdef CONFIG_NET_POLL_CONTROLLER
static void cp_poll_controller(struct net_device *dev);
#endif
static int cp_get_eeprom_len(struct net_device *dev);
static int cp_get_eeprom(struct net_device *dev,
struct ethtool_eeprom *eeprom, u8 *data);
static int cp_set_eeprom(struct net_device *dev,
struct ethtool_eeprom *eeprom, u8 *data);
static DEFINE_PCI_DEVICE_TABLE(cp_pci_tbl) = {
{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK, PCI_DEVICE_ID_REALTEK_8139), },
{ PCI_DEVICE(PCI_VENDOR_ID_TTTECH, PCI_DEVICE_ID_TTTECH_MC322), },
{ },
};
MODULE_DEVICE_TABLE(pci, cp_pci_tbl);
static struct {
const char str[ETH_GSTRING_LEN];
} ethtool_stats_keys[] = {
{ "tx_ok" },
{ "rx_ok" },
{ "tx_err" },
{ "rx_err" },
{ "rx_fifo" },
{ "frame_align" },
{ "tx_ok_1col" },
{ "tx_ok_mcol" },
{ "rx_ok_phys" },
{ "rx_ok_bcast" },
{ "rx_ok_mcast" },
{ "tx_abort" },
{ "tx_underrun" },
{ "rx_frags" },
};
#if CP_VLAN_TAG_USED
static void cp_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
{
struct cp_private *cp = netdev_priv(dev);
unsigned long flags;
spin_lock_irqsave(&cp->lock, flags);
cp->vlgrp = grp;
if (grp)
cp->cpcmd |= RxVlanOn;
else
cp->cpcmd &= ~RxVlanOn;
cpw16(CpCmd, cp->cpcmd);
spin_unlock_irqrestore(&cp->lock, flags);
}
#endif /* CP_VLAN_TAG_USED */
static inline void cp_set_rxbufsize (struct cp_private *cp)
{
unsigned int mtu = cp->dev->mtu;
if (mtu > ETH_DATA_LEN)
/* MTU + ethernet header + FCS + optional VLAN tag */
cp->rx_buf_sz = mtu + ETH_HLEN + 8;
else
cp->rx_buf_sz = PKT_BUF_SZ;
}
static inline void cp_rx_skb (struct cp_private *cp, struct sk_buff *skb,
struct cp_desc *desc)
{
skb->protocol = eth_type_trans (skb, cp->dev);
cp->dev->stats.rx_packets++;
cp->dev->stats.rx_bytes += skb->len;
#if CP_VLAN_TAG_USED
if (cp->vlgrp && (desc->opts2 & cpu_to_le32(RxVlanTagged))) {
vlan_hwaccel_receive_skb(skb, cp->vlgrp,
swab16(le32_to_cpu(desc->opts2) & 0xffff));
} else
#endif
netif_receive_skb(skb);
}
static void cp_rx_err_acct (struct cp_private *cp, unsigned rx_tail,
u32 status, u32 len)
{
netif_dbg(cp, rx_err, cp->dev, "rx err, slot %d status 0x%x len %d\n",
rx_tail, status, len);
cp->dev->stats.rx_errors++;
if (status & RxErrFrame)
cp->dev->stats.rx_frame_errors++;
if (status & RxErrCRC)
cp->dev->stats.rx_crc_errors++;
if ((status & RxErrRunt) || (status & RxErrLong))
cp->dev->stats.rx_length_errors++;
if ((status & (FirstFrag | LastFrag)) != (FirstFrag | LastFrag))
cp->dev->stats.rx_length_errors++;
if (status & RxErrFIFO)
cp->dev->stats.rx_fifo_errors++;
}
static inline unsigned int cp_rx_csum_ok (u32 status)
{
unsigned int protocol = (status >> 16) & 0x3;
if (likely((protocol == RxProtoTCP) && (!(status & TCPFail))))
return 1;
else if ((protocol == RxProtoUDP) && (!(status & UDPFail)))
return 1;
else if ((protocol == RxProtoIP) && (!(status & IPFail)))
return 1;
return 0;
}
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
static int cp_rx_poll(struct napi_struct *napi, int budget)
{
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
struct cp_private *cp = container_of(napi, struct cp_private, napi);
struct net_device *dev = cp->dev;
unsigned int rx_tail = cp->rx_tail;
int rx;
rx_status_loop:
rx = 0;
cpw16(IntrStatus, cp_rx_intr_mask);
while (1) {
u32 status, len;
dma_addr_t mapping;
struct sk_buff *skb, *new_skb;
struct cp_desc *desc;
const unsigned buflen = cp->rx_buf_sz;
skb = cp->rx_skb[rx_tail];
BUG_ON(!skb);
desc = &cp->rx_ring[rx_tail];
status = le32_to_cpu(desc->opts1);
if (status & DescOwn)
break;
len = (status & 0x1fff) - 4;
mapping = le64_to_cpu(desc->addr);
if ((status & (FirstFrag | LastFrag)) != (FirstFrag | LastFrag)) {
/* we don't support incoming fragmented frames.
* instead, we attempt to ensure that the
* pre-allocated RX skbs are properly sized such
* that RX fragments are never encountered
*/
cp_rx_err_acct(cp, rx_tail, status, len);
dev->stats.rx_dropped++;
cp->cp_stats.rx_frags++;
goto rx_next;
}
if (status & (RxError | RxErrFIFO)) {
cp_rx_err_acct(cp, rx_tail, status, len);
goto rx_next;
}
netif_dbg(cp, rx_status, dev, "rx slot %d status 0x%x len %d\n",
rx_tail, status, len);
new_skb = netdev_alloc_skb_ip_align(dev, buflen);
if (!new_skb) {
dev->stats.rx_dropped++;
goto rx_next;
}
dma_unmap_single(&cp->pdev->dev, mapping,
buflen, PCI_DMA_FROMDEVICE);
/* Handle checksum offloading for incoming packets. */
if (cp_rx_csum_ok(status))
skb->ip_summed = CHECKSUM_UNNECESSARY;
else
skb->ip_summed = CHECKSUM_NONE;
skb_put(skb, len);
mapping = dma_map_single(&cp->pdev->dev, new_skb->data, buflen,
PCI_DMA_FROMDEVICE);
cp->rx_skb[rx_tail] = new_skb;
cp_rx_skb(cp, skb, desc);
rx++;
rx_next:
cp->rx_ring[rx_tail].opts2 = 0;
cp->rx_ring[rx_tail].addr = cpu_to_le64(mapping);
if (rx_tail == (CP_RX_RING_SIZE - 1))
desc->opts1 = cpu_to_le32(DescOwn | RingEnd |
cp->rx_buf_sz);
else
desc->opts1 = cpu_to_le32(DescOwn | cp->rx_buf_sz);
rx_tail = NEXT_RX(rx_tail);
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
if (rx >= budget)
break;
}
cp->rx_tail = rx_tail;
/* if we did not reach work limit, then we're done with
* this round of polling
*/
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
if (rx < budget) {
unsigned long flags;
if (cpr16(IntrStatus) & cp_rx_intr_mask)
goto rx_status_loop;
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
spin_lock_irqsave(&cp->lock, flags);
cpw16_f(IntrMask, cp_intr_mask);
__napi_complete(napi);
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
spin_unlock_irqrestore(&cp->lock, flags);
}
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
return rx;
}
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
static irqreturn_t cp_interrupt (int irq, void *dev_instance)
{
struct net_device *dev = dev_instance;
struct cp_private *cp;
u16 status;
if (unlikely(dev == NULL))
return IRQ_NONE;
cp = netdev_priv(dev);
status = cpr16(IntrStatus);
if (!status || (status == 0xFFFF))
return IRQ_NONE;
netif_dbg(cp, intr, dev, "intr, status %04x cmd %02x cpcmd %04x\n",
status, cpr8(Cmd), cpr16(CpCmd));
cpw16(IntrStatus, status & ~cp_rx_intr_mask);
spin_lock(&cp->lock);
/* close possible race's with dev_close */
if (unlikely(!netif_running(dev))) {
cpw16(IntrMask, 0);
spin_unlock(&cp->lock);
return IRQ_HANDLED;
}
if (status & (RxOK | RxErr | RxEmpty | RxFIFOOvr))
if (napi_schedule_prep(&cp->napi)) {
cpw16_f(IntrMask, cp_norx_intr_mask);
__napi_schedule(&cp->napi);
}
if (status & (TxOK | TxErr | TxEmpty | SWInt))
cp_tx(cp);
if (status & LinkChg)
mii_check_media(&cp->mii_if, netif_msg_link(cp), false);
spin_unlock(&cp->lock);
if (status & PciErr) {
u16 pci_status;
pci_read_config_word(cp->pdev, PCI_STATUS, &pci_status);
pci_write_config_word(cp->pdev, PCI_STATUS, pci_status);
netdev_err(dev, "PCI bus error, status=%04x, PCI status=%04x\n",
status, pci_status);
/* TODO: reset hardware */
}
return IRQ_HANDLED;
}
#ifdef CONFIG_NET_POLL_CONTROLLER
/*
* Polling receive - used by netconsole and other diagnostic tools
* to allow network i/o with interrupts disabled.
*/
static void cp_poll_controller(struct net_device *dev)
{
disable_irq(dev->irq);
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
cp_interrupt(dev->irq, dev);
enable_irq(dev->irq);
}
#endif
static void cp_tx (struct cp_private *cp)
{
unsigned tx_head = cp->tx_head;
unsigned tx_tail = cp->tx_tail;
while (tx_tail != tx_head) {
struct cp_desc *txd = cp->tx_ring + tx_tail;
struct sk_buff *skb;
u32 status;
rmb();
status = le32_to_cpu(txd->opts1);
if (status & DescOwn)
break;
skb = cp->tx_skb[tx_tail];
BUG_ON(!skb);
dma_unmap_single(&cp->pdev->dev, le64_to_cpu(txd->addr),
le32_to_cpu(txd->opts1) & 0xffff,
PCI_DMA_TODEVICE);
if (status & LastFrag) {
if (status & (TxError | TxFIFOUnder)) {
netif_dbg(cp, tx_err, cp->dev,
"tx err, status 0x%x\n", status);
cp->dev->stats.tx_errors++;
if (status & TxOWC)
cp->dev->stats.tx_window_errors++;
if (status & TxMaxCol)
cp->dev->stats.tx_aborted_errors++;
if (status & TxLinkFail)
cp->dev->stats.tx_carrier_errors++;
if (status & TxFIFOUnder)
cp->dev->stats.tx_fifo_errors++;
} else {
cp->dev->stats.collisions +=
((status >> TxColCntShift) & TxColCntMask);
cp->dev->stats.tx_packets++;
cp->dev->stats.tx_bytes += skb->len;
netif_dbg(cp, tx_done, cp->dev,
"tx done, slot %d\n", tx_tail);
}
dev_kfree_skb_irq(skb);
}
cp->tx_skb[tx_tail] = NULL;
tx_tail = NEXT_TX(tx_tail);
}
cp->tx_tail = tx_tail;
if (TX_BUFFS_AVAIL(cp) > (MAX_SKB_FRAGS + 1))
netif_wake_queue(cp->dev);
}
static netdev_tx_t cp_start_xmit (struct sk_buff *skb,
struct net_device *dev)
{
struct cp_private *cp = netdev_priv(dev);
unsigned entry;
2005-05-13 07:28:49 +08:00
u32 eor, flags;
unsigned long intr_flags;
#if CP_VLAN_TAG_USED
u32 vlan_tag = 0;
#endif
2005-05-13 07:28:49 +08:00
int mss = 0;
spin_lock_irqsave(&cp->lock, intr_flags);
/* This is a hard error, log it. */
if (TX_BUFFS_AVAIL(cp) <= (skb_shinfo(skb)->nr_frags + 1)) {
netif_stop_queue(dev);
spin_unlock_irqrestore(&cp->lock, intr_flags);
netdev_err(dev, "BUG! Tx Ring full when queue awake!\n");
return NETDEV_TX_BUSY;
}
#if CP_VLAN_TAG_USED
if (cp->vlgrp && vlan_tx_tag_present(skb))
vlan_tag = TxVlanTag | swab16(vlan_tx_tag_get(skb));
#endif
entry = cp->tx_head;
eor = (entry == (CP_TX_RING_SIZE - 1)) ? RingEnd : 0;
2005-05-13 07:28:49 +08:00
if (dev->features & NETIF_F_TSO)
mss = skb_shinfo(skb)->gso_size;
2005-05-13 07:28:49 +08:00
if (skb_shinfo(skb)->nr_frags == 0) {
struct cp_desc *txd = &cp->tx_ring[entry];
u32 len;
dma_addr_t mapping;
len = skb->len;
mapping = dma_map_single(&cp->pdev->dev, skb->data, len, PCI_DMA_TODEVICE);
CP_VLAN_TX_TAG(txd, vlan_tag);
txd->addr = cpu_to_le64(mapping);
wmb();
2005-05-13 07:28:49 +08:00
flags = eor | len | DescOwn | FirstFrag | LastFrag;
if (mss)
flags |= LargeSend | ((mss & MSSMask) << MSSShift);
else if (skb->ip_summed == CHECKSUM_PARTIAL) {
const struct iphdr *ip = ip_hdr(skb);
if (ip->protocol == IPPROTO_TCP)
2005-05-13 07:28:49 +08:00
flags |= IPCS | TCPCS;
else if (ip->protocol == IPPROTO_UDP)
2005-05-13 07:28:49 +08:00
flags |= IPCS | UDPCS;
else
WARN_ON(1); /* we need a WARN() */
2005-05-13 07:28:49 +08:00
}
txd->opts1 = cpu_to_le32(flags);
wmb();
cp->tx_skb[entry] = skb;
entry = NEXT_TX(entry);
} else {
struct cp_desc *txd;
u32 first_len, first_eor;
dma_addr_t first_mapping;
int frag, first_entry = entry;
const struct iphdr *ip = ip_hdr(skb);
/* We must give this initial chunk to the device last.
* Otherwise we could race with the device.
*/
first_eor = eor;
first_len = skb_headlen(skb);
first_mapping = dma_map_single(&cp->pdev->dev, skb->data,
first_len, PCI_DMA_TODEVICE);
cp->tx_skb[entry] = skb;
entry = NEXT_TX(entry);
for (frag = 0; frag < skb_shinfo(skb)->nr_frags; frag++) {
skb_frag_t *this_frag = &skb_shinfo(skb)->frags[frag];
u32 len;
u32 ctrl;
dma_addr_t mapping;
len = this_frag->size;
mapping = dma_map_single(&cp->pdev->dev,
((void *) page_address(this_frag->page) +
this_frag->page_offset),
len, PCI_DMA_TODEVICE);
eor = (entry == (CP_TX_RING_SIZE - 1)) ? RingEnd : 0;
2005-05-13 07:28:49 +08:00
ctrl = eor | len | DescOwn;
if (mss)
ctrl |= LargeSend |
((mss & MSSMask) << MSSShift);
else if (skb->ip_summed == CHECKSUM_PARTIAL) {
if (ip->protocol == IPPROTO_TCP)
2005-05-13 07:28:49 +08:00
ctrl |= IPCS | TCPCS;
else if (ip->protocol == IPPROTO_UDP)
2005-05-13 07:28:49 +08:00
ctrl |= IPCS | UDPCS;
else
BUG();
2005-05-13 07:28:49 +08:00
}
if (frag == skb_shinfo(skb)->nr_frags - 1)
ctrl |= LastFrag;
txd = &cp->tx_ring[entry];
CP_VLAN_TX_TAG(txd, vlan_tag);
txd->addr = cpu_to_le64(mapping);
wmb();
txd->opts1 = cpu_to_le32(ctrl);
wmb();
cp->tx_skb[entry] = skb;
entry = NEXT_TX(entry);
}
txd = &cp->tx_ring[first_entry];
CP_VLAN_TX_TAG(txd, vlan_tag);
txd->addr = cpu_to_le64(first_mapping);
wmb();
if (skb->ip_summed == CHECKSUM_PARTIAL) {
if (ip->protocol == IPPROTO_TCP)
txd->opts1 = cpu_to_le32(first_eor | first_len |
FirstFrag | DescOwn |
IPCS | TCPCS);
else if (ip->protocol == IPPROTO_UDP)
txd->opts1 = cpu_to_le32(first_eor | first_len |
FirstFrag | DescOwn |
IPCS | UDPCS);
else
BUG();
} else
txd->opts1 = cpu_to_le32(first_eor | first_len |
FirstFrag | DescOwn);
wmb();
}
cp->tx_head = entry;
netif_dbg(cp, tx_queued, cp->dev, "tx queued, slot %d, skblen %d\n",
entry, skb->len);
if (TX_BUFFS_AVAIL(cp) <= (MAX_SKB_FRAGS + 1))
netif_stop_queue(dev);
spin_unlock_irqrestore(&cp->lock, intr_flags);
cpw8(TxPoll, NormalTxPoll);
return NETDEV_TX_OK;
}
/* Set or clear the multicast filter for this adaptor.
This routine is not state sensitive and need not be SMP locked. */
static void __cp_set_rx_mode (struct net_device *dev)
{
struct cp_private *cp = netdev_priv(dev);
u32 mc_filter[2]; /* Multicast hash filter */
int rx_mode;
u32 tmp;
/* Note: do not reorder, GCC is clever about common statements. */
if (dev->flags & IFF_PROMISC) {
/* Unconditionally log net taps. */
rx_mode =
AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
AcceptAllPhys;
mc_filter[1] = mc_filter[0] = 0xffffffff;
} else if ((netdev_mc_count(dev) > multicast_filter_limit) ||
(dev->flags & IFF_ALLMULTI)) {
/* Too many to filter perfectly -- accept all multicasts. */
rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
mc_filter[1] = mc_filter[0] = 0xffffffff;
} else {
struct netdev_hw_addr *ha;
rx_mode = AcceptBroadcast | AcceptMyPhys;
mc_filter[1] = mc_filter[0] = 0;
netdev_for_each_mc_addr(ha, dev) {
int bit_nr = ether_crc(ETH_ALEN, ha->addr) >> 26;
mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
rx_mode |= AcceptMulticast;
}
}
/* We can safely update without stopping the chip. */
tmp = cp_rx_config | rx_mode;
if (cp->rx_config != tmp) {
cpw32_f (RxConfig, tmp);
cp->rx_config = tmp;
}
cpw32_f (MAR0 + 0, mc_filter[0]);
cpw32_f (MAR0 + 4, mc_filter[1]);
}
static void cp_set_rx_mode (struct net_device *dev)
{
unsigned long flags;
struct cp_private *cp = netdev_priv(dev);
spin_lock_irqsave (&cp->lock, flags);
__cp_set_rx_mode(dev);
spin_unlock_irqrestore (&cp->lock, flags);
}
static void __cp_get_stats(struct cp_private *cp)
{
/* only lower 24 bits valid; write any value to clear */
cp->dev->stats.rx_missed_errors += (cpr32 (RxMissed) & 0xffffff);
cpw32 (RxMissed, 0);
}
static struct net_device_stats *cp_get_stats(struct net_device *dev)
{
struct cp_private *cp = netdev_priv(dev);
unsigned long flags;
/* The chip only need report frame silently dropped. */
spin_lock_irqsave(&cp->lock, flags);
if (netif_running(dev) && netif_device_present(dev))
__cp_get_stats(cp);
spin_unlock_irqrestore(&cp->lock, flags);
return &dev->stats;
}
static void cp_stop_hw (struct cp_private *cp)
{
cpw16(IntrStatus, ~(cpr16(IntrStatus)));
cpw16_f(IntrMask, 0);
cpw8(Cmd, 0);
cpw16_f(CpCmd, 0);
cpw16_f(IntrStatus, ~(cpr16(IntrStatus)));
cp->rx_tail = 0;
cp->tx_head = cp->tx_tail = 0;
}
static void cp_reset_hw (struct cp_private *cp)
{
unsigned work = 1000;
cpw8(Cmd, CmdReset);
while (work--) {
if (!(cpr8(Cmd) & CmdReset))
return;
schedule_timeout_uninterruptible(10);
}
netdev_err(cp->dev, "hardware reset timeout\n");
}
static inline void cp_start_hw (struct cp_private *cp)
{
cpw16(CpCmd, cp->cpcmd);
cpw8(Cmd, RxOn | TxOn);
}
static void cp_init_hw (struct cp_private *cp)
{
struct net_device *dev = cp->dev;
dma_addr_t ring_dma;
cp_reset_hw(cp);
cpw8_f (Cfg9346, Cfg9346_Unlock);
/* Restore our idea of the MAC address. */
cpw32_f (MAC0 + 0, le32_to_cpu (*(__le32 *) (dev->dev_addr + 0)));
cpw32_f (MAC0 + 4, le32_to_cpu (*(__le32 *) (dev->dev_addr + 4)));
cp_start_hw(cp);
cpw8(TxThresh, 0x06); /* XXX convert magic num to a constant */
__cp_set_rx_mode(dev);
cpw32_f (TxConfig, IFG | (TX_DMA_BURST << TxDMAShift));
cpw8(Config1, cpr8(Config1) | DriverLoaded | PMEnable);
/* Disable Wake-on-LAN. Can be turned on with ETHTOOL_SWOL */
cpw8(Config3, PARMEnable);
cp->wol_enabled = 0;
cpw8(Config5, cpr8(Config5) & PMEStatus);
cpw32_f(HiTxRingAddr, 0);
cpw32_f(HiTxRingAddr + 4, 0);
ring_dma = cp->ring_dma;
cpw32_f(RxRingAddr, ring_dma & 0xffffffff);
cpw32_f(RxRingAddr + 4, (ring_dma >> 16) >> 16);
ring_dma += sizeof(struct cp_desc) * CP_RX_RING_SIZE;
cpw32_f(TxRingAddr, ring_dma & 0xffffffff);
cpw32_f(TxRingAddr + 4, (ring_dma >> 16) >> 16);
cpw16(MultiIntr, 0);
cpw16_f(IntrMask, cp_intr_mask);
cpw8_f(Cfg9346, Cfg9346_Lock);
}
static int cp_refill_rx(struct cp_private *cp)
{
struct net_device *dev = cp->dev;
unsigned i;
for (i = 0; i < CP_RX_RING_SIZE; i++) {
struct sk_buff *skb;
dma_addr_t mapping;
skb = netdev_alloc_skb_ip_align(dev, cp->rx_buf_sz);
if (!skb)
goto err_out;
mapping = dma_map_single(&cp->pdev->dev, skb->data,
cp->rx_buf_sz, PCI_DMA_FROMDEVICE);
cp->rx_skb[i] = skb;
cp->rx_ring[i].opts2 = 0;
cp->rx_ring[i].addr = cpu_to_le64(mapping);
if (i == (CP_RX_RING_SIZE - 1))
cp->rx_ring[i].opts1 =
cpu_to_le32(DescOwn | RingEnd | cp->rx_buf_sz);
else
cp->rx_ring[i].opts1 =
cpu_to_le32(DescOwn | cp->rx_buf_sz);
}
return 0;
err_out:
cp_clean_rings(cp);
return -ENOMEM;
}
static void cp_init_rings_index (struct cp_private *cp)
{
cp->rx_tail = 0;
cp->tx_head = cp->tx_tail = 0;
}
static int cp_init_rings (struct cp_private *cp)
{
memset(cp->tx_ring, 0, sizeof(struct cp_desc) * CP_TX_RING_SIZE);
cp->tx_ring[CP_TX_RING_SIZE - 1].opts1 = cpu_to_le32(RingEnd);
cp_init_rings_index(cp);
return cp_refill_rx (cp);
}
static int cp_alloc_rings (struct cp_private *cp)
{
void *mem;
mem = dma_alloc_coherent(&cp->pdev->dev, CP_RING_BYTES,
&cp->ring_dma, GFP_KERNEL);
if (!mem)
return -ENOMEM;
cp->rx_ring = mem;
cp->tx_ring = &cp->rx_ring[CP_RX_RING_SIZE];
return cp_init_rings(cp);
}
static void cp_clean_rings (struct cp_private *cp)
{
struct cp_desc *desc;
unsigned i;
for (i = 0; i < CP_RX_RING_SIZE; i++) {
if (cp->rx_skb[i]) {
desc = cp->rx_ring + i;
dma_unmap_single(&cp->pdev->dev,le64_to_cpu(desc->addr),
cp->rx_buf_sz, PCI_DMA_FROMDEVICE);
dev_kfree_skb(cp->rx_skb[i]);
}
}
for (i = 0; i < CP_TX_RING_SIZE; i++) {
if (cp->tx_skb[i]) {
struct sk_buff *skb = cp->tx_skb[i];
desc = cp->tx_ring + i;
dma_unmap_single(&cp->pdev->dev,le64_to_cpu(desc->addr),
le32_to_cpu(desc->opts1) & 0xffff,
PCI_DMA_TODEVICE);
if (le32_to_cpu(desc->opts1) & LastFrag)
dev_kfree_skb(skb);
cp->dev->stats.tx_dropped++;
}
}
memset(cp->rx_ring, 0, sizeof(struct cp_desc) * CP_RX_RING_SIZE);
memset(cp->tx_ring, 0, sizeof(struct cp_desc) * CP_TX_RING_SIZE);
memset(cp->rx_skb, 0, sizeof(struct sk_buff *) * CP_RX_RING_SIZE);
memset(cp->tx_skb, 0, sizeof(struct sk_buff *) * CP_TX_RING_SIZE);
}
static void cp_free_rings (struct cp_private *cp)
{
cp_clean_rings(cp);
dma_free_coherent(&cp->pdev->dev, CP_RING_BYTES, cp->rx_ring,
cp->ring_dma);
cp->rx_ring = NULL;
cp->tx_ring = NULL;
}
static int cp_open (struct net_device *dev)
{
struct cp_private *cp = netdev_priv(dev);
int rc;
netif_dbg(cp, ifup, dev, "enabling interface\n");
rc = cp_alloc_rings(cp);
if (rc)
return rc;
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
napi_enable(&cp->napi);
cp_init_hw(cp);
rc = request_irq(dev->irq, cp_interrupt, IRQF_SHARED, dev->name, dev);
if (rc)
goto err_out_hw;
netif_carrier_off(dev);
mii_check_media(&cp->mii_if, netif_msg_link(cp), true);
netif_start_queue(dev);
return 0;
err_out_hw:
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
napi_disable(&cp->napi);
cp_stop_hw(cp);
cp_free_rings(cp);
return rc;
}
static int cp_close (struct net_device *dev)
{
struct cp_private *cp = netdev_priv(dev);
unsigned long flags;
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
napi_disable(&cp->napi);
netif_dbg(cp, ifdown, dev, "disabling interface\n");
spin_lock_irqsave(&cp->lock, flags);
netif_stop_queue(dev);
netif_carrier_off(dev);
cp_stop_hw(cp);
spin_unlock_irqrestore(&cp->lock, flags);
free_irq(dev->irq, dev);
cp_free_rings(cp);
return 0;
}
static void cp_tx_timeout(struct net_device *dev)
{
struct cp_private *cp = netdev_priv(dev);
unsigned long flags;
int rc;
netdev_warn(dev, "Transmit timeout, status %2x %4x %4x %4x\n",
cpr8(Cmd), cpr16(CpCmd),
cpr16(IntrStatus), cpr16(IntrMask));
spin_lock_irqsave(&cp->lock, flags);
cp_stop_hw(cp);
cp_clean_rings(cp);
rc = cp_init_rings(cp);
cp_start_hw(cp);
netif_wake_queue(dev);
spin_unlock_irqrestore(&cp->lock, flags);
}
#ifdef BROKEN
static int cp_change_mtu(struct net_device *dev, int new_mtu)
{
struct cp_private *cp = netdev_priv(dev);
int rc;
unsigned long flags;
/* check for invalid MTU, according to hardware limits */
if (new_mtu < CP_MIN_MTU || new_mtu > CP_MAX_MTU)
return -EINVAL;
/* if network interface not up, no need for complexity */
if (!netif_running(dev)) {
dev->mtu = new_mtu;
cp_set_rxbufsize(cp); /* set new rx buf size */
return 0;
}
spin_lock_irqsave(&cp->lock, flags);
cp_stop_hw(cp); /* stop h/w and free rings */
cp_clean_rings(cp);
dev->mtu = new_mtu;
cp_set_rxbufsize(cp); /* set new rx buf size */
rc = cp_init_rings(cp); /* realloc and restart h/w */
cp_start_hw(cp);
spin_unlock_irqrestore(&cp->lock, flags);
return rc;
}
#endif /* BROKEN */
2006-03-04 10:33:57 +08:00
static const char mii_2_8139_map[8] = {
BasicModeCtrl,
BasicModeStatus,
0,
0,
NWayAdvert,
NWayLPAR,
NWayExpansion,
0
};
static int mdio_read(struct net_device *dev, int phy_id, int location)
{
struct cp_private *cp = netdev_priv(dev);
return location < 8 && mii_2_8139_map[location] ?
readw(cp->regs + mii_2_8139_map[location]) : 0;
}
static void mdio_write(struct net_device *dev, int phy_id, int location,
int value)
{
struct cp_private *cp = netdev_priv(dev);
if (location == 0) {
cpw8(Cfg9346, Cfg9346_Unlock);
cpw16(BasicModeCtrl, value);
cpw8(Cfg9346, Cfg9346_Lock);
} else if (location < 8 && mii_2_8139_map[location])
cpw16(mii_2_8139_map[location], value);
}
/* Set the ethtool Wake-on-LAN settings */
static int netdev_set_wol (struct cp_private *cp,
const struct ethtool_wolinfo *wol)
{
u8 options;
options = cpr8 (Config3) & ~(LinkUp | MagicPacket);
/* If WOL is being disabled, no need for complexity */
if (wol->wolopts) {
if (wol->wolopts & WAKE_PHY) options |= LinkUp;
if (wol->wolopts & WAKE_MAGIC) options |= MagicPacket;
}
cpw8 (Cfg9346, Cfg9346_Unlock);
cpw8 (Config3, options);
cpw8 (Cfg9346, Cfg9346_Lock);
options = 0; /* Paranoia setting */
options = cpr8 (Config5) & ~(UWF | MWF | BWF);
/* If WOL is being disabled, no need for complexity */
if (wol->wolopts) {
if (wol->wolopts & WAKE_UCAST) options |= UWF;
if (wol->wolopts & WAKE_BCAST) options |= BWF;
if (wol->wolopts & WAKE_MCAST) options |= MWF;
}
cpw8 (Config5, options);
cp->wol_enabled = (wol->wolopts) ? 1 : 0;
return 0;
}
/* Get the ethtool Wake-on-LAN settings */
static void netdev_get_wol (struct cp_private *cp,
struct ethtool_wolinfo *wol)
{
u8 options;
wol->wolopts = 0; /* Start from scratch */
wol->supported = WAKE_PHY | WAKE_BCAST | WAKE_MAGIC |
WAKE_MCAST | WAKE_UCAST;
/* We don't need to go on if WOL is disabled */
if (!cp->wol_enabled) return;
options = cpr8 (Config3);
if (options & LinkUp) wol->wolopts |= WAKE_PHY;
if (options & MagicPacket) wol->wolopts |= WAKE_MAGIC;
options = 0; /* Paranoia setting */
options = cpr8 (Config5);
if (options & UWF) wol->wolopts |= WAKE_UCAST;
if (options & BWF) wol->wolopts |= WAKE_BCAST;
if (options & MWF) wol->wolopts |= WAKE_MCAST;
}
static void cp_get_drvinfo (struct net_device *dev, struct ethtool_drvinfo *info)
{
struct cp_private *cp = netdev_priv(dev);
strcpy (info->driver, DRV_NAME);
strcpy (info->version, DRV_VERSION);
strcpy (info->bus_info, pci_name(cp->pdev));
}
static int cp_get_regs_len(struct net_device *dev)
{
return CP_REGS_SIZE;
}
static int cp_get_sset_count (struct net_device *dev, int sset)
{
switch (sset) {
case ETH_SS_STATS:
return CP_NUM_STATS;
default:
return -EOPNOTSUPP;
}
}
static int cp_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct cp_private *cp = netdev_priv(dev);
int rc;
unsigned long flags;
spin_lock_irqsave(&cp->lock, flags);
rc = mii_ethtool_gset(&cp->mii_if, cmd);
spin_unlock_irqrestore(&cp->lock, flags);
return rc;
}
static int cp_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct cp_private *cp = netdev_priv(dev);
int rc;
unsigned long flags;
spin_lock_irqsave(&cp->lock, flags);
rc = mii_ethtool_sset(&cp->mii_if, cmd);
spin_unlock_irqrestore(&cp->lock, flags);
return rc;
}
static int cp_nway_reset(struct net_device *dev)
{
struct cp_private *cp = netdev_priv(dev);
return mii_nway_restart(&cp->mii_if);
}
static u32 cp_get_msglevel(struct net_device *dev)
{
struct cp_private *cp = netdev_priv(dev);
return cp->msg_enable;
}
static void cp_set_msglevel(struct net_device *dev, u32 value)
{
struct cp_private *cp = netdev_priv(dev);
cp->msg_enable = value;
}
static u32 cp_get_rx_csum(struct net_device *dev)
{
struct cp_private *cp = netdev_priv(dev);
return (cpr16(CpCmd) & RxChkSum) ? 1 : 0;
}
static int cp_set_rx_csum(struct net_device *dev, u32 data)
{
struct cp_private *cp = netdev_priv(dev);
u16 cmd = cp->cpcmd, newcmd;
newcmd = cmd;
if (data)
newcmd |= RxChkSum;
else
newcmd &= ~RxChkSum;
if (newcmd != cmd) {
unsigned long flags;
spin_lock_irqsave(&cp->lock, flags);
cp->cpcmd = newcmd;
cpw16_f(CpCmd, newcmd);
spin_unlock_irqrestore(&cp->lock, flags);
}
return 0;
}
static void cp_get_regs(struct net_device *dev, struct ethtool_regs *regs,
void *p)
{
struct cp_private *cp = netdev_priv(dev);
unsigned long flags;
if (regs->len < CP_REGS_SIZE)
return /* -EINVAL */;
regs->version = CP_REGS_VER;
spin_lock_irqsave(&cp->lock, flags);
memcpy_fromio(p, cp->regs, CP_REGS_SIZE);
spin_unlock_irqrestore(&cp->lock, flags);
}
static void cp_get_wol (struct net_device *dev, struct ethtool_wolinfo *wol)
{
struct cp_private *cp = netdev_priv(dev);
unsigned long flags;
spin_lock_irqsave (&cp->lock, flags);
netdev_get_wol (cp, wol);
spin_unlock_irqrestore (&cp->lock, flags);
}
static int cp_set_wol (struct net_device *dev, struct ethtool_wolinfo *wol)
{
struct cp_private *cp = netdev_priv(dev);
unsigned long flags;
int rc;
spin_lock_irqsave (&cp->lock, flags);
rc = netdev_set_wol (cp, wol);
spin_unlock_irqrestore (&cp->lock, flags);
return rc;
}
static void cp_get_strings (struct net_device *dev, u32 stringset, u8 *buf)
{
switch (stringset) {
case ETH_SS_STATS:
memcpy(buf, &ethtool_stats_keys, sizeof(ethtool_stats_keys));
break;
default:
BUG();
break;
}
}
static void cp_get_ethtool_stats (struct net_device *dev,
struct ethtool_stats *estats, u64 *tmp_stats)
{
struct cp_private *cp = netdev_priv(dev);
struct cp_dma_stats *nic_stats;
dma_addr_t dma;
int i;
nic_stats = dma_alloc_coherent(&cp->pdev->dev, sizeof(*nic_stats),
&dma, GFP_KERNEL);
if (!nic_stats)
return;
/* begin NIC statistics dump */
cpw32(StatsAddr + 4, (u64)dma >> 32);
cpw32(StatsAddr, ((u64)dma & DMA_BIT_MASK(32)) | DumpStats);
cpr32(StatsAddr);
for (i = 0; i < 1000; i++) {
if ((cpr32(StatsAddr) & DumpStats) == 0)
break;
udelay(10);
}
cpw32(StatsAddr, 0);
cpw32(StatsAddr + 4, 0);
cpr32(StatsAddr);
i = 0;
tmp_stats[i++] = le64_to_cpu(nic_stats->tx_ok);
tmp_stats[i++] = le64_to_cpu(nic_stats->rx_ok);
tmp_stats[i++] = le64_to_cpu(nic_stats->tx_err);
tmp_stats[i++] = le32_to_cpu(nic_stats->rx_err);
tmp_stats[i++] = le16_to_cpu(nic_stats->rx_fifo);
tmp_stats[i++] = le16_to_cpu(nic_stats->frame_align);
tmp_stats[i++] = le32_to_cpu(nic_stats->tx_ok_1col);
tmp_stats[i++] = le32_to_cpu(nic_stats->tx_ok_mcol);
tmp_stats[i++] = le64_to_cpu(nic_stats->rx_ok_phys);
tmp_stats[i++] = le64_to_cpu(nic_stats->rx_ok_bcast);
tmp_stats[i++] = le32_to_cpu(nic_stats->rx_ok_mcast);
tmp_stats[i++] = le16_to_cpu(nic_stats->tx_abort);
tmp_stats[i++] = le16_to_cpu(nic_stats->tx_underrun);
tmp_stats[i++] = cp->cp_stats.rx_frags;
BUG_ON(i != CP_NUM_STATS);
dma_free_coherent(&cp->pdev->dev, sizeof(*nic_stats), nic_stats, dma);
}
static const struct ethtool_ops cp_ethtool_ops = {
.get_drvinfo = cp_get_drvinfo,
.get_regs_len = cp_get_regs_len,
.get_sset_count = cp_get_sset_count,
.get_settings = cp_get_settings,
.set_settings = cp_set_settings,
.nway_reset = cp_nway_reset,
.get_link = ethtool_op_get_link,
.get_msglevel = cp_get_msglevel,
.set_msglevel = cp_set_msglevel,
.get_rx_csum = cp_get_rx_csum,
.set_rx_csum = cp_set_rx_csum,
.set_tx_csum = ethtool_op_set_tx_csum, /* local! */
.set_sg = ethtool_op_set_sg,
2005-05-13 07:28:49 +08:00
.set_tso = ethtool_op_set_tso,
.get_regs = cp_get_regs,
.get_wol = cp_get_wol,
.set_wol = cp_set_wol,
.get_strings = cp_get_strings,
.get_ethtool_stats = cp_get_ethtool_stats,
.get_eeprom_len = cp_get_eeprom_len,
.get_eeprom = cp_get_eeprom,
.set_eeprom = cp_set_eeprom,
};
static int cp_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
{
struct cp_private *cp = netdev_priv(dev);
int rc;
unsigned long flags;
if (!netif_running(dev))
return -EINVAL;
spin_lock_irqsave(&cp->lock, flags);
rc = generic_mii_ioctl(&cp->mii_if, if_mii(rq), cmd, NULL);
spin_unlock_irqrestore(&cp->lock, flags);
return rc;
}
static int cp_set_mac_address(struct net_device *dev, void *p)
{
struct cp_private *cp = netdev_priv(dev);
struct sockaddr *addr = p;
if (!is_valid_ether_addr(addr->sa_data))
return -EADDRNOTAVAIL;
memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
spin_lock_irq(&cp->lock);
cpw8_f(Cfg9346, Cfg9346_Unlock);
cpw32_f(MAC0 + 0, le32_to_cpu (*(__le32 *) (dev->dev_addr + 0)));
cpw32_f(MAC0 + 4, le32_to_cpu (*(__le32 *) (dev->dev_addr + 4)));
cpw8_f(Cfg9346, Cfg9346_Lock);
spin_unlock_irq(&cp->lock);
return 0;
}
/* Serial EEPROM section. */
/* EEPROM_Ctrl bits. */
#define EE_SHIFT_CLK 0x04 /* EEPROM shift clock. */
#define EE_CS 0x08 /* EEPROM chip select. */
#define EE_DATA_WRITE 0x02 /* EEPROM chip data in. */
#define EE_WRITE_0 0x00
#define EE_WRITE_1 0x02
#define EE_DATA_READ 0x01 /* EEPROM chip data out. */
#define EE_ENB (0x80 | EE_CS)
/* Delay between EEPROM clock transitions.
No extra delay is needed with 33Mhz PCI, but 66Mhz may change this.
*/
#define eeprom_delay() readl(ee_addr)
/* The EEPROM commands include the alway-set leading bit. */
#define EE_EXTEND_CMD (4)
#define EE_WRITE_CMD (5)
#define EE_READ_CMD (6)
#define EE_ERASE_CMD (7)
#define EE_EWDS_ADDR (0)
#define EE_WRAL_ADDR (1)
#define EE_ERAL_ADDR (2)
#define EE_EWEN_ADDR (3)
#define CP_EEPROM_MAGIC PCI_DEVICE_ID_REALTEK_8139
static void eeprom_cmd_start(void __iomem *ee_addr)
{
writeb (EE_ENB & ~EE_CS, ee_addr);
writeb (EE_ENB, ee_addr);
eeprom_delay ();
}
static void eeprom_cmd(void __iomem *ee_addr, int cmd, int cmd_len)
{
int i;
/* Shift the command bits out. */
for (i = cmd_len - 1; i >= 0; i--) {
int dataval = (cmd & (1 << i)) ? EE_DATA_WRITE : 0;
writeb (EE_ENB | dataval, ee_addr);
eeprom_delay ();
writeb (EE_ENB | dataval | EE_SHIFT_CLK, ee_addr);
eeprom_delay ();
}
writeb (EE_ENB, ee_addr);
eeprom_delay ();
}
static void eeprom_cmd_end(void __iomem *ee_addr)
{
writeb (~EE_CS, ee_addr);
eeprom_delay ();
}
static void eeprom_extend_cmd(void __iomem *ee_addr, int extend_cmd,
int addr_len)
{
int cmd = (EE_EXTEND_CMD << addr_len) | (extend_cmd << (addr_len - 2));
eeprom_cmd_start(ee_addr);
eeprom_cmd(ee_addr, cmd, 3 + addr_len);
eeprom_cmd_end(ee_addr);
}
static u16 read_eeprom (void __iomem *ioaddr, int location, int addr_len)
{
int i;
u16 retval = 0;
void __iomem *ee_addr = ioaddr + Cfg9346;
int read_cmd = location | (EE_READ_CMD << addr_len);
eeprom_cmd_start(ee_addr);
eeprom_cmd(ee_addr, read_cmd, 3 + addr_len);
for (i = 16; i > 0; i--) {
writeb (EE_ENB | EE_SHIFT_CLK, ee_addr);
eeprom_delay ();
retval =
(retval << 1) | ((readb (ee_addr) & EE_DATA_READ) ? 1 :
0);
writeb (EE_ENB, ee_addr);
eeprom_delay ();
}
eeprom_cmd_end(ee_addr);
return retval;
}
static void write_eeprom(void __iomem *ioaddr, int location, u16 val,
int addr_len)
{
int i;
void __iomem *ee_addr = ioaddr + Cfg9346;
int write_cmd = location | (EE_WRITE_CMD << addr_len);
eeprom_extend_cmd(ee_addr, EE_EWEN_ADDR, addr_len);
eeprom_cmd_start(ee_addr);
eeprom_cmd(ee_addr, write_cmd, 3 + addr_len);
eeprom_cmd(ee_addr, val, 16);
eeprom_cmd_end(ee_addr);
eeprom_cmd_start(ee_addr);
for (i = 0; i < 20000; i++)
if (readb(ee_addr) & EE_DATA_READ)
break;
eeprom_cmd_end(ee_addr);
eeprom_extend_cmd(ee_addr, EE_EWDS_ADDR, addr_len);
}
static int cp_get_eeprom_len(struct net_device *dev)
{
struct cp_private *cp = netdev_priv(dev);
int size;
spin_lock_irq(&cp->lock);
size = read_eeprom(cp->regs, 0, 8) == 0x8129 ? 256 : 128;
spin_unlock_irq(&cp->lock);
return size;
}
static int cp_get_eeprom(struct net_device *dev,
struct ethtool_eeprom *eeprom, u8 *data)
{
struct cp_private *cp = netdev_priv(dev);
unsigned int addr_len;
u16 val;
u32 offset = eeprom->offset >> 1;
u32 len = eeprom->len;
u32 i = 0;
eeprom->magic = CP_EEPROM_MAGIC;
spin_lock_irq(&cp->lock);
addr_len = read_eeprom(cp->regs, 0, 8) == 0x8129 ? 8 : 6;
if (eeprom->offset & 1) {
val = read_eeprom(cp->regs, offset, addr_len);
data[i++] = (u8)(val >> 8);
offset++;
}
while (i < len - 1) {
val = read_eeprom(cp->regs, offset, addr_len);
data[i++] = (u8)val;
data[i++] = (u8)(val >> 8);
offset++;
}
if (i < len) {
val = read_eeprom(cp->regs, offset, addr_len);
data[i] = (u8)val;
}
spin_unlock_irq(&cp->lock);
return 0;
}
static int cp_set_eeprom(struct net_device *dev,
struct ethtool_eeprom *eeprom, u8 *data)
{
struct cp_private *cp = netdev_priv(dev);
unsigned int addr_len;
u16 val;
u32 offset = eeprom->offset >> 1;
u32 len = eeprom->len;
u32 i = 0;
if (eeprom->magic != CP_EEPROM_MAGIC)
return -EINVAL;
spin_lock_irq(&cp->lock);
addr_len = read_eeprom(cp->regs, 0, 8) == 0x8129 ? 8 : 6;
if (eeprom->offset & 1) {
val = read_eeprom(cp->regs, offset, addr_len) & 0xff;
val |= (u16)data[i++] << 8;
write_eeprom(cp->regs, offset, val, addr_len);
offset++;
}
while (i < len - 1) {
val = (u16)data[i++];
val |= (u16)data[i++] << 8;
write_eeprom(cp->regs, offset, val, addr_len);
offset++;
}
if (i < len) {
val = read_eeprom(cp->regs, offset, addr_len) & 0xff00;
val |= (u16)data[i];
write_eeprom(cp->regs, offset, val, addr_len);
}
spin_unlock_irq(&cp->lock);
return 0;
}
/* Put the board into D3cold state and wait for WakeUp signal */
static void cp_set_d3_state (struct cp_private *cp)
{
pci_enable_wake (cp->pdev, 0, 1); /* Enable PME# generation */
pci_set_power_state (cp->pdev, PCI_D3hot);
}
static const struct net_device_ops cp_netdev_ops = {
.ndo_open = cp_open,
.ndo_stop = cp_close,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = cp_set_mac_address,
.ndo_set_multicast_list = cp_set_rx_mode,
.ndo_get_stats = cp_get_stats,
.ndo_do_ioctl = cp_ioctl,
.ndo_start_xmit = cp_start_xmit,
.ndo_tx_timeout = cp_tx_timeout,
#if CP_VLAN_TAG_USED
.ndo_vlan_rx_register = cp_vlan_rx_register,
#endif
#ifdef BROKEN
.ndo_change_mtu = cp_change_mtu,
#endif
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = cp_poll_controller,
#endif
};
static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
{
struct net_device *dev;
struct cp_private *cp;
int rc;
void __iomem *regs;
resource_size_t pciaddr;
unsigned int addr_len, i, pci_using_dac;
#ifndef MODULE
static int version_printed;
if (version_printed++ == 0)
pr_info("%s", version);
#endif
if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pdev->revision < 0x20) {
dev_info(&pdev->dev,
"This (id %04x:%04x rev %02x) is not an 8139C+ compatible chip, use 8139too\n",
pdev->vendor, pdev->device, pdev->revision);
return -ENODEV;
}
dev = alloc_etherdev(sizeof(struct cp_private));
if (!dev)
return -ENOMEM;
SET_NETDEV_DEV(dev, &pdev->dev);
cp = netdev_priv(dev);
cp->pdev = pdev;
cp->dev = dev;
cp->msg_enable = (debug < 0 ? CP_DEF_MSG_ENABLE : debug);
spin_lock_init (&cp->lock);
cp->mii_if.dev = dev;
cp->mii_if.mdio_read = mdio_read;
cp->mii_if.mdio_write = mdio_write;
cp->mii_if.phy_id = CP_INTERNAL_PHY;
cp->mii_if.phy_id_mask = 0x1f;
cp->mii_if.reg_num_mask = 0x1f;
cp_set_rxbufsize(cp);
rc = pci_enable_device(pdev);
if (rc)
goto err_out_free;
rc = pci_set_mwi(pdev);
if (rc)
goto err_out_disable;
rc = pci_request_regions(pdev, DRV_NAME);
if (rc)
goto err_out_mwi;
pciaddr = pci_resource_start(pdev, 1);
if (!pciaddr) {
rc = -EIO;
dev_err(&pdev->dev, "no MMIO resource\n");
goto err_out_res;
}
if (pci_resource_len(pdev, 1) < CP_REGS_SIZE) {
rc = -EIO;
dev_err(&pdev->dev, "MMIO resource (%llx) too small\n",
(unsigned long long)pci_resource_len(pdev, 1));
goto err_out_res;
}
/* Configure DMA attributes. */
if ((sizeof(dma_addr_t) > 4) &&
!pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)) &&
!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
pci_using_dac = 1;
} else {
pci_using_dac = 0;
rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc) {
dev_err(&pdev->dev,
"No usable DMA configuration, aborting\n");
goto err_out_res;
}
rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (rc) {
dev_err(&pdev->dev,
"No usable consistent DMA configuration, aborting\n");
goto err_out_res;
}
}
cp->cpcmd = (pci_using_dac ? PCIDAC : 0) |
PCIMulRW | RxChkSum | CpRxOn | CpTxOn;
regs = ioremap(pciaddr, CP_REGS_SIZE);
if (!regs) {
rc = -EIO;
dev_err(&pdev->dev, "Cannot map PCI MMIO (%Lx@%Lx)\n",
(unsigned long long)pci_resource_len(pdev, 1),
(unsigned long long)pciaddr);
goto err_out_res;
}
dev->base_addr = (unsigned long) regs;
cp->regs = regs;
cp_stop_hw(cp);
/* read MAC address from EEPROM */
addr_len = read_eeprom (regs, 0, 8) == 0x8129 ? 8 : 6;
for (i = 0; i < 3; i++)
((__le16 *) (dev->dev_addr))[i] =
cpu_to_le16(read_eeprom (regs, i + 7, addr_len));
memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
dev->netdev_ops = &cp_netdev_ops;
[NET]: Make NAPI polling independent of struct net_device objects. Several devices have multiple independant RX queues per net device, and some have a single interrupt doorbell for several queues. In either case, it's easier to support layouts like that if the structure representing the poll is independant from the net device itself. The signature of the ->poll() call back goes from: int foo_poll(struct net_device *dev, int *budget) to int foo_poll(struct napi_struct *napi, int budget) The caller is returned the number of RX packets processed (or the number of "NAPI credits" consumed if you want to get abstract). The callee no longer messes around bumping dev->quota, *budget, etc. because that is all handled in the caller upon return. The napi_struct is to be embedded in the device driver private data structures. Furthermore, it is the driver's responsibility to disable all NAPI instances in it's ->stop() device close handler. Since the napi_struct is privatized into the driver's private data structures, only the driver knows how to get at all of the napi_struct instances it may have per-device. With lots of help and suggestions from Rusty Russell, Roland Dreier, Michael Chan, Jeff Garzik, and Jamal Hadi Salim. Bug fixes from Thomas Graf, Roland Dreier, Peter Zijlstra, Joseph Fannin, Scott Wood, Hans J. Koch, and Michael Chan. [ Ported to current tree and all drivers converted. Integrated Stephen's follow-on kerneldoc additions, and restored poll_list handling to the old style to fix mutual exclusion issues. -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-04 07:41:36 +08:00
netif_napi_add(dev, &cp->napi, cp_rx_poll, 16);
dev->ethtool_ops = &cp_ethtool_ops;
dev->watchdog_timeo = TX_TIMEOUT;
#if CP_VLAN_TAG_USED
dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
#endif
if (pci_using_dac)
dev->features |= NETIF_F_HIGHDMA;
2005-05-13 07:28:49 +08:00
#if 0 /* disabled by default until verified */
dev->features |= NETIF_F_TSO;
#endif
dev->irq = pdev->irq;
rc = register_netdev(dev);
if (rc)
goto err_out_iomap;
netdev_info(dev, "RTL-8139C+ at 0x%lx, %pM, IRQ %d\n",
dev->base_addr, dev->dev_addr, dev->irq);
pci_set_drvdata(pdev, dev);
/* enable busmastering and memory-write-invalidate */
pci_set_master(pdev);
if (cp->wol_enabled)
cp_set_d3_state (cp);
return 0;
err_out_iomap:
iounmap(regs);
err_out_res:
pci_release_regions(pdev);
err_out_mwi:
pci_clear_mwi(pdev);
err_out_disable:
pci_disable_device(pdev);
err_out_free:
free_netdev(dev);
return rc;
}
static void cp_remove_one (struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
struct cp_private *cp = netdev_priv(dev);
unregister_netdev(dev);
iounmap(cp->regs);
if (cp->wol_enabled)
pci_set_power_state (pdev, PCI_D0);
pci_release_regions(pdev);
pci_clear_mwi(pdev);
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
free_netdev(dev);
}
#ifdef CONFIG_PM
static int cp_suspend (struct pci_dev *pdev, pm_message_t state)
{
struct net_device *dev = pci_get_drvdata(pdev);
struct cp_private *cp = netdev_priv(dev);
unsigned long flags;
if (!netif_running(dev))
return 0;
netif_device_detach (dev);
netif_stop_queue (dev);
spin_lock_irqsave (&cp->lock, flags);
/* Disable Rx and Tx */
cpw16 (IntrMask, 0);
cpw8 (Cmd, cpr8 (Cmd) & (~RxOn | ~TxOn));
spin_unlock_irqrestore (&cp->lock, flags);
pci_save_state(pdev);
pci_enable_wake(pdev, pci_choose_state(pdev, state), cp->wol_enabled);
pci_set_power_state(pdev, pci_choose_state(pdev, state));
return 0;
}
static int cp_resume (struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata (pdev);
struct cp_private *cp = netdev_priv(dev);
unsigned long flags;
if (!netif_running(dev))
return 0;
netif_device_attach (dev);
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
pci_enable_wake(pdev, PCI_D0, 0);
/* FIXME: sh*t may happen if the Rx ring buffer is depleted */
cp_init_rings_index (cp);
cp_init_hw (cp);
netif_start_queue (dev);
spin_lock_irqsave (&cp->lock, flags);
mii_check_media(&cp->mii_if, netif_msg_link(cp), false);
spin_unlock_irqrestore (&cp->lock, flags);
return 0;
}
#endif /* CONFIG_PM */
static struct pci_driver cp_driver = {
.name = DRV_NAME,
.id_table = cp_pci_tbl,
.probe = cp_init_one,
.remove = cp_remove_one,
#ifdef CONFIG_PM
.resume = cp_resume,
.suspend = cp_suspend,
#endif
};
static int __init cp_init (void)
{
#ifdef MODULE
pr_info("%s", version);
#endif
return pci_register_driver(&cp_driver);
}
static void __exit cp_exit (void)
{
pci_unregister_driver (&cp_driver);
}
module_init(cp_init);
module_exit(cp_exit);