UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/media/video/bt8xx/bttv-cards.c

4841 lines
144 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*
bttv-cards.c
this file has configuration informations - card-specific stuff
like the big tvcards array for the most part
Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de)
[PATCH] v4l: 800: whitespace cleanups - Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
& Marcus Metzler (mocm@thp.uni-koeln.de)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
(c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/kmod.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/vmalloc.h>
#include <linux/firmware.h>
V4L/DVB (5899): bttv: Fix Viewcast Osprey 440 support Various gpio and mux settings for the Osprey 440 weren't correct. Fix them and provide some documentation about how the gpios work. The osprey eeprom routine wasn't run for the 440, add it. It was also crap, re-written to be better. Add the Osprey 440 to the Bt878 ALSA driver's whitelist. Currently the sample rate is fixed at 32kHz, as the driver doesn't support different rates for digital input mode, though the card can select the rate from 32, 44.1, or 48 kHz via gpio. Setting the audio gain via ALSA isn't supported yet; a userspace tool that programs the X9221 via i2c-dev must be used. The Bt878 digital audio format isn't programmed correctly for the CS5331A ADC used, resulting in extremely garbled sound. That is fixed in a followup patch. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-22 08:26:40 +08:00
#include <net/checksum.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
V4L/DVB (7967): bt8xx: unaligned access Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-21 11:32:21 +08:00
#include <asm/unaligned.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <asm/io.h>
#include "bttvp.h"
V4L/DVB (3269): ioctls cleanups. - Now, all internal ioctls are at v4l2-common.h - removed unused ioctl at saa6752hs.h - all debug ioctl code moved to v4l2-common.c - removed duplicated stuff from other cards Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-10 01:32:31 +08:00
#include <media/v4l2-common.h>
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
#include <media/tvaudio.h>
V4L/DVB (6412): Audio hooks moved to another file Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-27 03:54:54 +08:00
#include "bttv-audio-hook.h"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* fwd decl */
static void boot_msp34xx(struct bttv *btv, int pin);
static void hauppauge_eeprom(struct bttv *btv);
static void avermedia_eeprom(struct bttv *btv);
V4L/DVB (5899): bttv: Fix Viewcast Osprey 440 support Various gpio and mux settings for the Osprey 440 weren't correct. Fix them and provide some documentation about how the gpios work. The osprey eeprom routine wasn't run for the 440, add it. It was also crap, re-written to be better. Add the Osprey 440 to the Bt878 ALSA driver's whitelist. Currently the sample rate is fixed at 32kHz, as the driver doesn't support different rates for digital input mode, though the card can select the rate from 32, 44.1, or 48 kHz via gpio. Setting the audio gain via ALSA isn't supported yet; a userspace tool that programs the X9221 via i2c-dev must be used. The Bt878 digital audio format isn't programmed correctly for the CS5331A ADC used, resulting in extremely garbled sound. That is fixed in a followup patch. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-22 08:26:40 +08:00
static void osprey_eeprom(struct bttv *btv, const u8 ee[256]);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static void modtec_eeprom(struct bttv *btv);
static void init_PXC200(struct bttv *btv);
[PATCH] BTTV support for Adlink RTV24 capture card The bttv module currently lacks support for the Adlink RTV24 capture card. The following patch adds support for the Adlink RTV24 video capture card to the bttv module. Cc: Gerd Knorr <kraxel@bytesex.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 13:04:45 +08:00
static void init_RTV24(struct bttv *btv);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static void rv605_muxsel(struct bttv *btv, unsigned int input);
static void eagle_muxsel(struct bttv *btv, unsigned int input);
static void xguard_muxsel(struct bttv *btv, unsigned int input);
static void ivc120_muxsel(struct bttv *btv, unsigned int input);
static void gvc1100_muxsel(struct bttv *btv, unsigned int input);
static void PXC200_muxsel(struct bttv *btv, unsigned int input);
static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input);
static void picolo_tetra_init(struct bttv *btv);
static void tibetCS16_muxsel(struct bttv *btv, unsigned int input);
static void tibetCS16_init(struct bttv *btv);
static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input);
static void kodicom4400r_init(struct bttv *btv);
static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input);
static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);
V4L/DVB (7366): Support for a 16-channel bt878 card I have what looks like a Geovision GV-600 (or 650) card. It has a large chip in the middle labeled CONEXANT FUSION 878A 25878-13 E345881.1 0312 TAIWAN It has an audio connector coming out from a chip labeled ATMEL 0242 AT89C2051-24PI It is identified as follows on my Debian GNU/Linux Etch (kernel 2.6.18) ... 01:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 01:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) ... 01:0a.0 0400: 109e:036e (rev 11) Subsystem: 008a:763c Flags: bus master, medium devsel, latency 64, IRQ 58 Memory at dfffe000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 01:0a.1 0480: 109e:0878 (rev 11) Subsystem: 008a:763c Flags: bus master, medium devsel, latency 64, IRQ 58 Memory at dffff000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 It was being detected as a GENERIC UNKNOWN CARD both by the 2.6.18 kernel and the latest v4l-dvb drivers, but it did not work at all. The card has sixteen (16) BNC video inputs, four of them on the board itself and twelve on three daughter-cards. It has a single bt878 chip, no tuner and what looks like and audio input. After doing some research I managed to get only eight channels working by forcing card=125 and those DID NOT match channels 0-7 on the card, and no audio. Based on what was working for card=125, I added the card definition block, added a specific muxsel routine and got the card working fully with xawtv, where the sixteen channels show up as Composite0 to Composite15, matching the channel labels in the card and daughter-cards. I have made no efforts yet to get audio working, but would appreciate any pointers. Signed-off-by: Ernesto Hernández-Novich <emhn@usb.ve> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-23 01:45:58 +08:00
static void geovision_muxsel(struct bttv *btv, unsigned int input);
V4L/DVB (10564): bttv: fix external mux for PHYTEC VD-009 Old versions of the bttv driver would use the high nibble of an input's muxsel value to program the GPIO lines enabled via gpiomask2. Apparently this was supposed to be for switching external audio muxes. Anyway, the code that did this was removed sometime in the pre-git 2.6 series. These phytec boards used this feature to control an external video mux and I guess no one noticed when they removed the code. So add a muxsel_hook for these boards that does the necessary gpio setting. BTW, I doubt the needs_tvaudio setting for these cards is correct. Cc: Dirk Heer <d.heer@phytec.de> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
static void phytec_muxsel(struct bttv *btv, unsigned int input);
V4L/DVB (10827): Add support for GeoVision GV-800(S) I have a GeoVision GV-800(S) card, it has 4 CONEXANT BT878A chips. It has 16 video inputs and 4 audio inputs, and it is almost identical to the GV-800, as seen on http://bttv-gallery.de . The only difference appears to be the analog mux, it has a CD22M3494 in place of the MT8816AP. The card has a blue PCB, as seen in this picture: http://www.gsbr.com.br/imagem/kits/GeoVision%20GV%20800.jpg . This card wasn't originally supported, and it was detected as UNKNOWN/GENERIC. The video inputs weren't working, so I tried "forcing" a few cards like the GeoVision GV-600, but there was still no video. So I made a patch to support this card, based on the Kodicom 4400r. The GV-800(S) is identified as follows: ... 02:00.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:00.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 02:04.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:04.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 02:08.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:08.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 02:0c.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:0c.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) ... 02:00.0 0400: 109e:036e (rev 11) Subsystem: 800a:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdfff000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 Kernel modules: bttv 02:00.1 0480: 109e:0878 (rev 11) Subsystem: 800a:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffe000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 02:04.0 0400: 109e:036e (rev 11) Subsystem: 800b:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffd000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 Kernel modules: bttv 02:04.1 0480: 109e:0878 (rev 11) Subsystem: 800b:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffc000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 02:08.0 0400: 109e:036e (rev 11) Subsystem: 800c:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffb000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 Kernel modules: bttv 02:08.1 0480: 109e:0878 (rev 11) Subsystem: 800c:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffa000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 02:0c.0 0400: 109e:036e (rev 11) Subsystem: 800d:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdff9000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 Kernel modules: bttv 02:0c.1 0480: 109e:0878 (rev 11) Subsystem: 800d:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdff8000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 As you can see, the GV-800(S) card is almost identical to the GV-800 on bttv-gallery, so this patch might also work for that card. If not, only a few changes should be required on the gv800s_write() function. After this patch, the video inputs work correctly on linux 2.6.24 and 2.6.27 using the software 'motion'. The input order may seem a little odd, but it's the order the original software/driver uses, and I decided to keep that order to get the most out of the card. I tried to get the audio working with the snd-bt87x module, but I only get noise from every audio input, even after selecting a different mux with alsamixer. Also, after trying to play sound from those sources, I randomly get a RISC error about an invalid RISC opcode, and then that output stops working. I also can't change the sampling rate when recording. Any pointers to adding audio support are welcome. Signed-off-by: Bruno Christo <bchristo@inf.ufsm.br> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-03 09:38:59 +08:00
static void gv800s_muxsel(struct bttv *btv, unsigned int input);
static void gv800s_init(struct bttv *btv);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static int terratec_active_radio_upgrade(struct bttv *btv);
static int tea5757_read(struct bttv *btv);
static int tea5757_write(struct bttv *btv, int value);
static void identify_by_eeprom(struct bttv *btv,
unsigned char eeprom_data[256]);
static int __devinit pvr_boot(struct bttv *btv);
/* config variables */
V4L/DVB (3355): removed uneeded init on structs like static int foo=0 - Static vars are equal to zero by default. Removed unnecessary =0 from them, saving some data space Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-01-14 00:10:19 +08:00
static unsigned int triton1;
static unsigned int vsfx;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static unsigned int latency = UNSET;
[PATCH] v4l: oopsfix for BTTV on badly behaved PCI chipsets no_overlay bttv parameter implemented to fix OOPS on some PCI chipsets (like some VIA) with these behaviors: 1) If pci_quicks does identify the chip as having troubles to handle PCI2PCI transfers, no_overlay defaults to 1. The user may force it to 0, to reenable (not recommended). 2) For newer chipsets not blacklisted, no_overlay=1 is provided as a workaround until PCI chipset included on /drivers/pci/quirks.c Thanks to Bodo Eggert <7eggert@gmx.de> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-05 03:53:30 +08:00
int no_overlay=-1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static unsigned int card[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
static unsigned int pll[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
static unsigned int tuner[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
static unsigned int svhs[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
static struct bttv *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
#ifdef MODULE
static unsigned int autoload = 1;
#else
V4L/DVB (3355): removed uneeded init on structs like static int foo=0 - Static vars are equal to zero by default. Removed unnecessary =0 from them, saving some data space Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-01-14 00:10:19 +08:00
static unsigned int autoload;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#endif
static unsigned int gpiomask = UNSET;
static unsigned int audioall = UNSET;
static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
/* insmod options */
module_param(triton1, int, 0444);
module_param(vsfx, int, 0444);
module_param(no_overlay, int, 0444);
module_param(latency, int, 0444);
module_param(gpiomask, int, 0444);
module_param(audioall, int, 0444);
module_param(autoload, int, 0444);
module_param_array(card, int, NULL, 0444);
module_param_array(pll, int, NULL, 0444);
module_param_array(tuner, int, NULL, 0444);
module_param_array(svhs, int, NULL, 0444);
module_param_array(remote, int, NULL, 0444);
module_param_array(audiomux, int, NULL, 0444);
MODULE_PARM_DESC(triton1,"set ETBF pci config bit "
"[enable bug compatibility for triton1 + others]");
MODULE_PARM_DESC(vsfx,"set VSFX pci config bit "
"[yet another chipset flaw workaround]");
MODULE_PARM_DESC(latency,"pci latency timer");
MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)");
MODULE_PARM_DESC(tuner,"specify installed tuner type");
MODULE_PARM_DESC(autoload,"automatically load i2c modules like tuner.o, default is 1 (yes)");
V4L/DVB (3439): Added no_overlay option and quirks to saa7134 Some chipsets have several problems when pci to pci transfers are activated on overlay mode. the option no_overlay allows disabling such feature of the driver, in favor of keeping the system stable. The default is to use pcipci_fail flag defined on drivers/pci/quirks.c. It also allows the user to override it by forcing disable overlay or forcing enable. Forcing enable may generate PCI transfer corruption, including disk mass corruption, so should be used with care. Added a text description to this option and make messages looks the same at both bttv and saa7134 drivers. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-11 03:46:50 +08:00
MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)"
" [some VIA/SIS chipsets are known to have problem with overlay]");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* ----------------------------------------------------------------------- */
/* list of card IDs for bt878+ cards */
static struct CARD {
unsigned id;
int cardnr;
char *name;
} cards[] __devinitdata = {
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
{ 0x13eb0070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV" },
{ 0x39000070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV-D" },
{ 0x45000070, BTTV_BOARD_HAUPPAUGEPVR, "Hauppauge WinTV/PVR" },
{ 0xff000070, BTTV_BOARD_OSPREY1x0, "Osprey-100" },
{ 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" },
{ 0xff020070, BTTV_BOARD_OSPREY500, "Osprey-500" },
{ 0xff030070, BTTV_BOARD_OSPREY2000, "Osprey-2000" },
{ 0xff040070, BTTV_BOARD_OSPREY540, "Osprey-540" },
[PATCH] v4l: 709: added osprey 440 card - Added Osprey 440 card. Signed-off-by: Kenth Andersson <kenth@popwire.com> Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:02 +08:00
{ 0xff070070, BTTV_BOARD_OSPREY440, "Osprey-440" },
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
{ 0x00011002, BTTV_BOARD_ATI_TVWONDER, "ATI TV Wonder" },
{ 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
{ 0x6606107d, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
{ 0x6607107d, BTTV_BOARD_WINFASTVC100, "Leadtek WinFast VC 100" },
{ 0x6609107d, BTTV_BOARD_WINFAST2000, "Leadtek TV 2000 XP" },
{ 0x263610b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
{ 0x264510b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" },
[PATCH] v4l: 800: whitespace cleanups - Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
{ 0x402010fc, BTTV_BOARD_GVBCTV3PCI, "I-O Data Co. GV-BCTV3/PCI" },
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
{ 0x405010fc, BTTV_BOARD_GVBCTV4PCI, "I-O Data Co. GV-BCTV4/PCI" },
{ 0x407010fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
[PATCH] v4l: 800: whitespace cleanups - Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
{ 0xd01810fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
{ 0x001211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" },
[PATCH] v4l: BTTV updates and card additions - Remove $Id CVS logs for V4L files - Added DVICO FusionHDTV 5 Lite card. - Added Acorp Y878F. - CodingStyle fixes. - Added tuner_addr to bttv cards structure. - linux/version.h replaced by linux/utsname.h on bttvp.h - kernel module for acquiring RDS data from a SAA6588. - Allow multiple open() and reading calls to /dev/radio on bttv-driver.c - added i2c address for lgdt330x. Signed-off-by: Hans J. Koch <koch@hjk-az.de> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:39 +08:00
/* some cards ship with byteswapped IDs ... */
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
{ 0x1200bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" },
{ 0xff00bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" },
[PATCH] v4l: BTTV updates and card additions - Remove $Id CVS logs for V4L files - Added DVICO FusionHDTV 5 Lite card. - Added Acorp Y878F. - CodingStyle fixes. - Added tuner_addr to bttv cards structure. - linux/version.h replaced by linux/utsname.h on bttvp.h - kernel module for acquiring RDS data from a SAA6588. - Allow multiple open() and reading calls to /dev/radio on bttv-driver.c - added i2c address for lgdt330x. Signed-off-by: Hans J. Koch <koch@hjk-az.de> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:39 +08:00
/* this seems to happen as well ... */
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
{ 0xff1211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" },
V4L/DVB (5785): Revisited: 3dfx Voodoo TV 200 (US) Fix support for 3dfx Voodoo TV 200 variant Signed-off-by: Wade Berrier <wberrier@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-26 00:02:16 +08:00
{ 0x3000121a, BTTV_BOARD_VOODOOTV_200, "3Dfx VoodooTV 200" },
{ 0x263710b4, BTTV_BOARD_VOODOOTV_FM, "3Dfx VoodooTV FM" },
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
{ 0x3060121a, BTTV_BOARD_STB2, "3Dfx VoodooTV 100/ STB OEM" },
{ 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
{ 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" },
{ 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
{ 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
{ 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" },
{ 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" },
{ 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" },
{ 0x00011461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" },
{ 0x00021461, BTTV_BOARD_AVERMEDIA98, "AVermedia TVCapture 98" },
{ 0x00031461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" },
{ 0x00041461, BTTV_BOARD_AVERMEDIA98, "AVerMedia TVCapture 98" },
{ 0x03001461, BTTV_BOARD_AVERMEDIA98, "VDOMATE TV TUNER CARD" },
{ 0x1117153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL B/G)" },
{ 0x1118153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL B/G)" },
{ 0x1119153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL I)" },
{ 0x111a153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL I)" },
{ 0x1123153b, BTTV_BOARD_TERRATVRADIO, "Terratec TV Radio+" },
{ 0x1127153b, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.05)" },
[PATCH] v4l: BTTV updates and card additions - Remove $Id CVS logs for V4L files - Added DVICO FusionHDTV 5 Lite card. - Added Acorp Y878F. - CodingStyle fixes. - Added tuner_addr to bttv cards structure. - linux/version.h replaced by linux/utsname.h on bttvp.h - kernel module for acquiring RDS data from a SAA6588. - Allow multiple open() and reading calls to /dev/radio on bttv-driver.c - added i2c address for lgdt330x. Signed-off-by: Hans J. Koch <koch@hjk-az.de> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:39 +08:00
/* clashes with FlyVideo
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
*{ 0x18521852, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.10)" }, */
{ 0x1134153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (LR102)" },
{ 0x1135153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* LR102 */
{ 0x5018153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue" }, /* ?? */
{ 0xff3b153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* ?? */
{ 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
{ 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
{ 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
{ 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
{ 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
{ 0x1430aa00, BTTV_BOARD_PV143, "Provideo PV143A" },
{ 0x1431aa00, BTTV_BOARD_PV143, "Provideo PV143B" },
{ 0x1432aa00, BTTV_BOARD_PV143, "Provideo PV143C" },
{ 0x1433aa00, BTTV_BOARD_PV143, "Provideo PV143D" },
{ 0x1433aa03, BTTV_BOARD_PV143, "Security Eyes" },
{ 0x1460aa00, BTTV_BOARD_PV150, "Provideo PV150A-1" },
{ 0x1461aa01, BTTV_BOARD_PV150, "Provideo PV150A-2" },
{ 0x1462aa02, BTTV_BOARD_PV150, "Provideo PV150A-3" },
{ 0x1463aa03, BTTV_BOARD_PV150, "Provideo PV150A-4" },
{ 0x1464aa04, BTTV_BOARD_PV150, "Provideo PV150B-1" },
{ 0x1465aa05, BTTV_BOARD_PV150, "Provideo PV150B-2" },
{ 0x1466aa06, BTTV_BOARD_PV150, "Provideo PV150B-3" },
{ 0x1467aa07, BTTV_BOARD_PV150, "Provideo PV150B-4" },
{ 0xa132ff00, BTTV_BOARD_IVC100, "IVC-100" },
{ 0xa1550000, BTTV_BOARD_IVC200, "IVC-200" },
{ 0xa1550001, BTTV_BOARD_IVC200, "IVC-200" },
{ 0xa1550002, BTTV_BOARD_IVC200, "IVC-200" },
{ 0xa1550003, BTTV_BOARD_IVC200, "IVC-200" },
{ 0xa1550100, BTTV_BOARD_IVC200, "IVC-200G" },
{ 0xa1550101, BTTV_BOARD_IVC200, "IVC-200G" },
{ 0xa1550102, BTTV_BOARD_IVC200, "IVC-200G" },
{ 0xa1550103, BTTV_BOARD_IVC200, "IVC-200G" },
{ 0xa182ff00, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff01, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff02, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff03, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff04, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff05, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff06, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff07, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff08, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff09, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff0a, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff0b, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff0c, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff0d, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff0e, BTTV_BOARD_IVC120, "IVC-120G" },
{ 0xa182ff0f, BTTV_BOARD_IVC120, "IVC-120G" },
V4L/DVB (10299): bttv: Add support for IVCE-8784 support for V4L2 bttv driver It's a quad Bt878 PCI-e x1 capture board that's basically the same as the IVC-200 (quad Bt878 PCI) capture board that's currently supported in the V4L2 bttv driver. Manufacturer's web page for IVCE-8784 with photo and info: http://www.iei.com.tw/en/product_IPC.asp?model=IVCE-8784 Signed-off-by: Douglas Kosovic <douglask@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-23 10:07:26 +08:00
{ 0xf0500000, BTTV_BOARD_IVCE8784, "IVCE-8784" },
{ 0xf0500001, BTTV_BOARD_IVCE8784, "IVCE-8784" },
{ 0xf0500002, BTTV_BOARD_IVCE8784, "IVCE-8784" },
{ 0xf0500003, BTTV_BOARD_IVCE8784, "IVCE-8784" },
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
{ 0x41424344, BTTV_BOARD_GRANDTEC, "GrandTec Multi Capture" },
{ 0x01020304, BTTV_BOARD_XGUARD, "Grandtec Grand X-Guard" },
{ 0x18501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
{ 0xa0501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
{ 0x18511851, BTTV_BOARD_FLYVIDEO98EZ, "FlyVideo 98EZ (LR51)/ CyberMail AV" },
{ 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
{ 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
{ 0x18501f7f, BTTV_BOARD_FLYVIDEO_98, "Lifeview Flyvideo 98" },
V4L/DVB (4118): Whitespace cleanups Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-20 11:30:57 +08:00
{ 0x010115cb, BTTV_BOARD_GMV1, "AG GMV1" },
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
{ 0x010114c7, BTTV_BOARD_MODTEC_205, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
{ 0x10b42636, BTTV_BOARD_HAUPPAUGE878, "STB ???" },
{ 0x217d6606, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
{ 0xfff6f6ff, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" },
{ 0x03116000, BTTV_BOARD_SENSORAY311, "Sensoray 311" },
{ 0x00790e11, BTTV_BOARD_WINDVR, "Canopus WinDVR PCI" },
{ 0xa0fca1a0, BTTV_BOARD_ZOLTRIX, "Face to Face Tvmax" },
{ 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" },
{ 0x146caa0c, BTTV_BOARD_PV951, "ituner spectra8" },
[PATCH] v4l: 800: whitespace cleanups - Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
{ 0x200a1295, BTTV_BOARD_PXC200, "ImageNation PXC200A" },
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
{ 0x40111554, BTTV_BOARD_PV_BT878P_9B, "Prolink Pixelview PV-BT" },
{ 0x17de0a01, BTTV_BOARD_KWORLD, "Mecer TV/FM/Video Tuner" },
{ 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" },
{ 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" },
{ 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
{ 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
{ 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" },
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
V4L/DVB (5497): Additional card support for bttv driver SSAI (www.ssai.us) makes several Bt878-based capture cards that get used in our surveillance, conferencing, and medical imaging systems. The attached relatively small patch adds support for these cards, which fall into two broad * boards with one or more Bt878s, one or more composite inputs, and no S-video or tuner inputs * boards with one Bt878, one composite input, one S-video input, and no tuner input Signed-off-by: Scott Alfter <salfter@ssai.us> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-03 01:22:39 +08:00
{ 0x53534149, BTTV_BOARD_SSAI_SECURITY, "SSAI Security Video Interface" },
{ 0x5353414a, BTTV_BOARD_SSAI_ULTRASOUND, "SSAI Ultrasound Video Interface" },
[PATCH] v4l: BTTV updates and card additions - Remove $Id CVS logs for V4L files - Added DVICO FusionHDTV 5 Lite card. - Added Acorp Y878F. - CodingStyle fixes. - Added tuner_addr to bttv cards structure. - linux/version.h replaced by linux/utsname.h on bttvp.h - kernel module for acquiring RDS data from a SAA6588. - Allow multiple open() and reading calls to /dev/radio on bttv-driver.c - added i2c address for lgdt330x. Signed-off-by: Hans J. Koch <koch@hjk-az.de> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:39 +08:00
/* likely broken, vendor id doesn't match the other magic views ...
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
* { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
[PATCH] v4l: BTTV updates and card additions - Remove $Id CVS logs for V4L files - Added DVICO FusionHDTV 5 Lite card. - Added Acorp Y878F. - CodingStyle fixes. - Added tuner_addr to bttv cards structure. - linux/version.h replaced by linux/utsname.h on bttvp.h - kernel module for acquiring RDS data from a SAA6588. - Allow multiple open() and reading calls to /dev/radio on bttv-driver.c - added i2c address for lgdt330x. Signed-off-by: Hans J. Koch <koch@hjk-az.de> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:39 +08:00
V4L (1023): Added Hauppauge ImpactVCB board - Modifications to bttv to support the Hauppauge ImpactVCB product (Model #64900). Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-10 01:25:01 +08:00
/* Duplicate PCI ID, reconfigure for this board during the eeprom read.
* { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB, "Hauppauge ImpactVCB" }, */
V4L/DVB (10944): Conceptronic CTVFMI2 PCI Id My BTTV_BOARD_CONCEPTRONIC_CTVFMI2 card wasn't auto-detected, here's a patch that adds its PCI id. lspci -nnv output: 05:06.0 Multimedia video controller [0400]: Brooktree Corporation Bt878 Video Capture [109e:036e] (rev 11) 05:06.1 Multimedia controller [0480]: Brooktree Corporation Bt878 Audio Capture [109e:0878] (rev 11) Press <break> within 3 seconds if this is wrong. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-11 19:18:53 +08:00
{ 0x109e036e, BTTV_BOARD_CONCEPTRONIC_CTVFMI2, "Conceptronic CTVFMi v2"},
[PATCH] v4l: BTTV updates and card additions - Remove $Id CVS logs for V4L files - Added DVICO FusionHDTV 5 Lite card. - Added Acorp Y878F. - CodingStyle fixes. - Added tuner_addr to bttv cards structure. - linux/version.h replaced by linux/utsname.h on bttvp.h - kernel module for acquiring RDS data from a SAA6588. - Allow multiple open() and reading calls to /dev/radio on bttv-driver.c - added i2c address for lgdt330x. Signed-off-by: Hans J. Koch <koch@hjk-az.de> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:39 +08:00
/* DVB cards (using pci function .1 for mpeg data xfer) */
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
{ 0x001c11bd, BTTV_BOARD_PINNACLESAT, "Pinnacle PCTV Sat" },
V4L/DVB (3411): group dvb-bt8xx Subsystem ID's together, in order. - group dvb-bt8xx Subsystem ID's together, in order. Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-01-24 03:11:06 +08:00
{ 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
{ 0x20007063, BTTV_BOARD_PC_HDTV, "pcHDTV HD-2000 TV"},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
{ 0x002611bd, BTTV_BOARD_TWINHAN_DST, "Pinnacle PCTV SAT CI" },
{ 0x00011822, BTTV_BOARD_TWINHAN_DST, "Twinhan VisionPlus DVB" },
{ 0xfc00270f, BTTV_BOARD_TWINHAN_DST, "ChainTech digitop DST-1000 DVB-S" },
{ 0x07711461, BTTV_BOARD_AVDVBT_771, "AVermedia AverTV DVB-T 771" },
V4L/DVB (3411): group dvb-bt8xx Subsystem ID's together, in order. - group dvb-bt8xx Subsystem ID's together, in order. Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-01-24 03:11:06 +08:00
{ 0x07611461, BTTV_BOARD_AVDVBT_761, "AverMedia AverTV DVB-T 761" },
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
{ 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE, "DViCO FusionHDTV DVB-T Lite" },
V4L/DVB (5061): Bt8xx: add support for Ultraview DVB-T Lite Ultraview DVB-T Lite is a clone of DViCO FusionHDTV DVB-T Lite Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-01-08 09:12:22 +08:00
{ 0xdb1118ac, BTTV_BOARD_DVICO_DVBT_LITE, "Ultraview DVB-T Lite" },
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
{ 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE, "DViCO FusionHDTV 5 Lite" },
V4L/DVB (4186): Add support for the DNTV Live! mini DVB-T card. Signed-off-by: Cameron Hutchinson <camh@xdna.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-06-22 05:45:31 +08:00
{ 0x00261822, BTTV_BOARD_TWINHAN_DST, "DNTV Live! Mini "},
V4L/DVB (5803): Bttv: add support for DViCO FusionHDTV 2 add analog video support for DViCO FusionHDTV 2 Thanks to Todd Ignasiak for donating the card. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-28 23:19:20 +08:00
{ 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2, "DViCO FusionHDTV 2" },
V4L/DVB (7366): Support for a 16-channel bt878 card I have what looks like a Geovision GV-600 (or 650) card. It has a large chip in the middle labeled CONEXANT FUSION 878A 25878-13 E345881.1 0312 TAIWAN It has an audio connector coming out from a chip labeled ATMEL 0242 AT89C2051-24PI It is identified as follows on my Debian GNU/Linux Etch (kernel 2.6.18) ... 01:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 01:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) ... 01:0a.0 0400: 109e:036e (rev 11) Subsystem: 008a:763c Flags: bus master, medium devsel, latency 64, IRQ 58 Memory at dfffe000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 01:0a.1 0480: 109e:0878 (rev 11) Subsystem: 008a:763c Flags: bus master, medium devsel, latency 64, IRQ 58 Memory at dffff000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 It was being detected as a GENERIC UNKNOWN CARD both by the 2.6.18 kernel and the latest v4l-dvb drivers, but it did not work at all. The card has sixteen (16) BNC video inputs, four of them on the board itself and twelve on three daughter-cards. It has a single bt878 chip, no tuner and what looks like and audio input. After doing some research I managed to get only eight channels working by forcing card=125 and those DID NOT match channels 0-7 on the card, and no audio. Based on what was working for card=125, I added the card definition block, added a specific muxsel routine and got the card working fully with xawtv, where the sixteen channels show up as Composite0 to Composite15, matching the channel labels in the card and daughter-cards. I have made no efforts yet to get audio working, but would appreciate any pointers. Signed-off-by: Ernesto Hernández-Novich <emhn@usb.ve> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-23 01:45:58 +08:00
{ 0x763c008a, BTTV_BOARD_GEOVISION_GV600, "GeoVision GV-600" },
V4L/DVB (8628): bttv: Add support for Encore ENLTV2-FM Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) and CDI Brasil (www.cdibrasil.com.br/) for sponsoring this development. Signed-off-by: Gilberto <gilberto@sistemafenix.com.br> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-08-05 21:14:13 +08:00
{ 0x18011000, BTTV_BOARD_ENLTV_FM_2, "Encore ENL TV-FM-2" },
V4L/DVB (10827): Add support for GeoVision GV-800(S) I have a GeoVision GV-800(S) card, it has 4 CONEXANT BT878A chips. It has 16 video inputs and 4 audio inputs, and it is almost identical to the GV-800, as seen on http://bttv-gallery.de . The only difference appears to be the analog mux, it has a CD22M3494 in place of the MT8816AP. The card has a blue PCB, as seen in this picture: http://www.gsbr.com.br/imagem/kits/GeoVision%20GV%20800.jpg . This card wasn't originally supported, and it was detected as UNKNOWN/GENERIC. The video inputs weren't working, so I tried "forcing" a few cards like the GeoVision GV-600, but there was still no video. So I made a patch to support this card, based on the Kodicom 4400r. The GV-800(S) is identified as follows: ... 02:00.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:00.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 02:04.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:04.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 02:08.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:08.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 02:0c.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:0c.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) ... 02:00.0 0400: 109e:036e (rev 11) Subsystem: 800a:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdfff000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 Kernel modules: bttv 02:00.1 0480: 109e:0878 (rev 11) Subsystem: 800a:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffe000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 02:04.0 0400: 109e:036e (rev 11) Subsystem: 800b:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffd000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 Kernel modules: bttv 02:04.1 0480: 109e:0878 (rev 11) Subsystem: 800b:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffc000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 02:08.0 0400: 109e:036e (rev 11) Subsystem: 800c:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffb000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 Kernel modules: bttv 02:08.1 0480: 109e:0878 (rev 11) Subsystem: 800c:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffa000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 02:0c.0 0400: 109e:036e (rev 11) Subsystem: 800d:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdff9000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 Kernel modules: bttv 02:0c.1 0480: 109e:0878 (rev 11) Subsystem: 800d:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdff8000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 As you can see, the GV-800(S) card is almost identical to the GV-800 on bttv-gallery, so this patch might also work for that card. If not, only a few changes should be required on the gv800s_write() function. After this patch, the video inputs work correctly on linux 2.6.24 and 2.6.27 using the software 'motion'. The input order may seem a little odd, but it's the order the original software/driver uses, and I decided to keep that order to get the most out of the card. I tried to get the audio working with the snd-bt87x module, but I only get noise from every audio input, even after selecting a different mux with alsamixer. Also, after trying to play sound from those sources, I randomly get a RISC error about an invalid RISC opcode, and then that output stops working. I also can't change the sampling rate when recording. Any pointers to adding audio support are welcome. Signed-off-by: Bruno Christo <bchristo@inf.ufsm.br> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-03 09:38:59 +08:00
{ 0x763d800a, BTTV_BOARD_GEOVISION_GV800S, "GeoVision GV-800(S) (master)" },
{ 0x763d800b, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
{ 0x763d800c, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
{ 0x763d800d, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" },
V4L/DVB (11124): Add support for ProVideo PV-183 to bttv Add support for ProVideo PV-183 to bttv This patch adds support for the ProVideo PV-183 card to the bttv device driver. The PV-183 is a PCI card with 8 BT878 devices plus a Hint Corp HiNT HB4 PCI-PCI Bridge. Each BT878 has two composite input channels available. There are no tuners on this card. Signed-off-by: Alan McIvor <alan.mcivor@reveal.co.nz> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-13 08:43:34 +08:00
{ 0x15401830, BTTV_BOARD_PV183, "Provideo PV183-1" },
{ 0x15401831, BTTV_BOARD_PV183, "Provideo PV183-2" },
{ 0x15401832, BTTV_BOARD_PV183, "Provideo PV183-3" },
{ 0x15401833, BTTV_BOARD_PV183, "Provideo PV183-4" },
{ 0x15401834, BTTV_BOARD_PV183, "Provideo PV183-5" },
{ 0x15401835, BTTV_BOARD_PV183, "Provideo PV183-6" },
{ 0x15401836, BTTV_BOARD_PV183, "Provideo PV183-7" },
{ 0x15401837, BTTV_BOARD_PV183, "Provideo PV183-8" },
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{ 0, -1, NULL }
};
/* ----------------------------------------------------------------------- */
/* array with description for bt848 / bt878 tv/grabber cards */
struct tvcard bttv_tvcards[] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* ---- card 0x00 ---------------------------------- */
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_UNKNOWN] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = " *** UNKNOWN/GENERIC *** ",
.video_inputs = 4,
.svhs = 2,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 0),
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = UNSET,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_MIRO] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "MIRO PCTV",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 15,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 2, 0, 0, 0 },
.gpiomute = 10,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 1,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = UNSET,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_HAUPPAUGE] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Hauppauge (bt848)",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 7,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0, 1, 2, 3 },
.gpiomute = 4,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 1,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = UNSET,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_STB] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "STB, Gateway P/N 6000699 (bt848)",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 7,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 4, 0, 2, 3 },
.gpiomute = 1,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.no_msp34xx = 1,
.needs_tvaudio = 1,
.tuner_type = TUNER_PHILIPS_NTSC,
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
.has_radio = 1,
},
/* ---- card 0x04 ---------------------------------- */
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_INTEL] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Intel Create and Share PCI/ Smart Video Recorder III",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 0, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0 },
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 0,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_DIAMOND] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Diamond DTV2000",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 3,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 0),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0, 1, 0, 1 },
.gpiomute = 3,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 1,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = UNSET,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_AVERMEDIA] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "AVerMedia TVPhone",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 3,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.gpiomask = 0x0f,
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0x0c, 0x04, 0x08, 0x04 },
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* 0x04 for some cards ?? */
.needs_tvaudio = 1,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = UNSET,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
V4L/DVB (6416): Split hooks on volume and audio mode and rework their handling Also convert audio_mode_gpio functions from audio_hook Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-26 03:53:04 +08:00
.audio_mode_gpio= avermedia_tvphone_audio,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.has_remote = 1,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_MATRIX_VISION] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "MATRIX-Vision MV-Delta",
.video_inputs = 5,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 3,
.gpiomask = 0,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 0, 0),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0 },
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 1,
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
/* ---- card 0x08 ---------------------------------- */
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_FLYVIDEO] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0xc00,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0, 0xc00, 0x800, 0x400 },
.gpiomute = 0xc00,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 1,
.pll = PLL_28,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = UNSET,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_TURBOTV] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "IMS/IXmicro TurboTV",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 3,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 1, 1, 2, 3 },
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_TEMIC_PAL,
.tuner_addr = ADDR_UNSET,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_HAUPPAUGE878] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Hauppauge (bt878)",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0x0f, /* old: 7 */
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 0, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0, 1, 2, 3 },
.gpiomute = 4,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 1,
.pll = PLL_28,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = UNSET,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_MIROPRO] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "MIRO PCTV pro",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0x3014f,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0x20001,0x10001, 0, 0 },
.gpiomute = 10,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 1,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = UNSET,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
/* ---- card 0x0c ---------------------------------- */
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_ADSTECH_TV] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "ADS Technologies Channel Surfer TV (bt848)",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 15,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 13, 14, 11, 7 },
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 1,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = UNSET,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_AVERMEDIA98] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "AVerMedia TVCapture 98",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 4, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 15,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 13, 14, 11, 7 },
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 1,
.msp34xx_alt = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
V4L/DVB (6416): Split hooks on volume and audio mode and rework their handling Also convert audio_mode_gpio functions from audio_hook Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-26 03:53:04 +08:00
.audio_mode_gpio= avermedia_tv_stereo_audio,
[PATCH] v4l: 799: don t request gpint on avermedia tv capture 98 - Don't request GPINT on Avermedia TV Capture 98. Signed-off-by: Ray Cole <ray_cole@earthlink.net>. Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
.no_gpioirq = 1,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_VHX] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Aimslab Video Highway Xtreme (VHX)",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 7,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */
.gpiomute = 4,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 1,
.pll = PLL_28,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = UNSET,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_ZOLTRIX] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Zoltrix TV-Max",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 15,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0, 0, 1, 0 },
.gpiomute = 10,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 1,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = UNSET,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
/* ---- card 0x10 ---------------------------------- */
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_PIXVIEWPLAYTV] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Prolink Pixelview PlayTV (bt878)",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0x01fe00,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
.gpiomute = 0x002000,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 1,
.pll = PLL_28,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = UNSET,
V4L/DVB (7294): : tuner and radio addresses are missing for the PixelView PlayTV card The PixelView PlayTV card definition structure was missing initialization of the tuner_addr and radio_addr fields. As a result it was impossible to have the tuner initialized using parameters specified while loading the bttv.ko module. This regression became visible after the v4l rearrangements introduced somewhere around 2.6.15 kernel version. The root cause for the tuner initialization failure is located in the attach_inform function in the bttv-i2c.c file. There at the very beginning the addr variable holding the tuner device address is initialized with the value taken from the bttv_tvcards array. For the PixelView PlayTV card the tuner address field (and the radio address as well) was uninitialized, and thus equal 0. Later in that function execution of the TUNER_SET_TYPE_ADDR tuner command is guarded with check for the tuner address either equal ADDR_UNSET, or client->addr. Since both are non-zero (the latter in case of the card owned by me at the runtime is equal 0x61) the TUNER_SET_TYPE_ADDR command is not executed, and consequently in the tuner_attach function in the tuner-core.c file call to i2c_attach_client does not result in assigning the tuner type variable with the requested value. Providing initialization of the tuner_addr and radio_addr with ADDR_UNSET values as it is already done for other tv cards defined in bttv-cards.c ensures that the tuner initialization is done correctly, just as it used to be in the 2.6.14 kernel. Signed-off-by: Wojciech Migda <wojtek.golf@interia.pl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-23 01:45:36 +08:00
.tuner_addr = ADDR_UNSET,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_WINVIEW_601] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Leadtek WinView 601",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0x8300f8,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1, 0),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 },
.gpiomute = 0xcfa007,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 1,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = UNSET,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
V4L/DVB (6416): Split hooks on volume and audio mode and rework their handling Also convert audio_mode_gpio functions from audio_hook Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-26 03:53:04 +08:00
.volume_gpio = winview_volume,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.has_radio = 1,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_AVEC_INTERCAP] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "AVEC Intercapture",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 2, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 1, 0, 0, 0 },
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 1,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = UNSET,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_LIFE_FLYKIT] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
.svhs = NO_SVHS,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.gpiomask = 0x8dff00,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0 },
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.no_msp34xx = 1,
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
/* ---- card 0x14 ---------------------------------- */
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_CEI_RAFFLES] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "CEI Raffles Card",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 3, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = UNSET,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_CONFERENCETV] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 2, tuner, line in */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0x1800,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0, 0x800, 0x1000, 0x1000 },
.gpiomute = 0x1800,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL_I,
.tuner_addr = ADDR_UNSET,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_PHOEBE_TVMAS] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Askey CPH050/ Phoebe Tv Master + FM",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0xc00,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0, 1, 0x800, 0x400 },
.gpiomute = 0xc00,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 1,
.pll = PLL_28,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = UNSET,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_MODTEC_205] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
.svhs = NO_SVHS,
V4L/DVB (10562): bttv: rework the way digital inputs are indicated The code was using a muxsel value of -1U to indicate a digital input. A couple places in were checking of muxsel < 0 to detect this, which doesn't work of course because muxsel is unsigned and can't be negative. Only a couple cards had digital inputs and it was always the last one, so for the card database create a one bit field that indicates the last input is digital. On init, this is used to set a new field in the bttv struct to the digital input's number or UNSET for none. This makes it easier to check if the current input is digital. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.has_dig_in = 1,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.gpiomask = 7,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 0), /* input 2 is digital */
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .digital_mode= DIGITAL_MODE_CAMERA, */
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0, 0, 0, 0 },
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_ALPS_TSBB5_PAL_I,
.tuner_addr = ADDR_UNSET,
},
/* ---- card 0x18 ---------------------------------- */
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_MAGICTVIEW061] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Askey CPH05X/06X (bt878) [many vendors]",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0xe00,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = {0x400, 0x400, 0x400, 0x400 },
.gpiomute = 0xc00,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 1,
.pll = PLL_28,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = UNSET,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
.has_remote = 1,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_VOBIS_BOOSTAR] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0x1f0fff,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
.gpiomute = 0x40000,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 0,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
V4L/DVB (6416): Split hooks on volume and audio mode and rework their handling Also convert audio_mode_gpio functions from audio_hook Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-26 03:53:04 +08:00
.audio_mode_gpio= terratv_audio,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_HAUPPAUG_WCAM] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Hauppauge WinCam newer (bt878)",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 3,
.gpiomask = 7,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 0, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0, 1, 2, 3 },
.gpiomute = 4,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 1,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = UNSET,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_MAXI] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 2, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0x1800,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0, 0x800, 0x1000, 0x1000 },
.gpiomute = 0x1800,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_SECAM,
.tuner_addr = ADDR_UNSET,
},
/* ---- card 0x1c ---------------------------------- */
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_TERRATV] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Terratec TerraTV+ Version 1.1 (bt878)",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0x1f0fff,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0x20000, 0x30000, 0x10000, 0x00000 },
.gpiomute = 0x40000,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 0,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
V4L/DVB (6416): Split hooks on volume and audio mode and rework their handling Also convert audio_mode_gpio functions from audio_hook Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-26 03:53:04 +08:00
.audio_mode_gpio= terratv_audio,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* GPIO wiring:
External 20 pin connector (for Active Radio Upgrade board)
gpio00: i2c-sda
gpio01: i2c-scl
gpio02: om5610-data
gpio03: om5610-clk
gpio04: om5610-wre
gpio05: om5610-stereo
gpio06: rds6588-davn
gpio07: Pin 7 n.c.
gpio08: nIOW
gpio09+10: nIOR, nSEL ?? (bt878)
gpio09: nIOR (bt848)
gpio10: nSEL (bt848)
Sound Routing:
gpio16: u2-A0 (1st 4052bt)
gpio17: u2-A1
gpio18: u2-nEN
gpio19: u4-A0 (2nd 4052)
gpio20: u4-A1
u4-nEN - GND
Btspy:
00000 : Cdrom (internal audio input)
10000 : ext. Video audio input
20000 : TV Mono
a0000 : TV Mono/2
1a0000 : TV Stereo
30000 : Radio
40000 : Mute
[PATCH] v4l: BTTV updates and card additions - Remove $Id CVS logs for V4L files - Added DVICO FusionHDTV 5 Lite card. - Added Acorp Y878F. - CodingStyle fixes. - Added tuner_addr to bttv cards structure. - linux/version.h replaced by linux/utsname.h on bttvp.h - kernel module for acquiring RDS data from a SAA6588. - Allow multiple open() and reading calls to /dev/radio on bttv-driver.c - added i2c address for lgdt330x. Signed-off-by: Hans J. Koch <koch@hjk-az.de> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:39 +08:00
*/
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_PXC200] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
.name = "Imagenation PXC200",
.video_inputs = 5,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 1, /* was: 4 */
.gpiomask = 0,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 0, 0),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0 },
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 1,
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
.muxsel_hook = PXC200_muxsel,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_FLYVIDEO_98] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Lifeview FlyVideo 98 LR50",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0x1800, /* 0x8dfe00 */
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0, 0x0800, 0x1000, 0x1000 },
.gpiomute = 0x1800,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.pll = PLL_28,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = UNSET,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_IPROTV] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Formac iProTV, Formac ProTV I (bt848)",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 3,
.gpiomask = 1,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 1, 0, 0, 0 },
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
},
/* ---- card 0x20 ---------------------------------- */
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_INTEL_C_S_PCI] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Intel Create and Share PCI/ Smart Video Recorder III",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 0, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0 },
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 0,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_TERRATVALUE] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Terratec TerraTValue Version Bt878",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0xffff00,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0x500, 0, 0x300, 0x900 },
.gpiomute = 0x900,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_WINFAST2000] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Leadtek WinFast 2000/ WinFast 2000 XP",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* TV, CVid, SVid, CVid over SVid connector */
.muxsel = MUXSEL(2, 3, 1, 1, 0),
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
.gpiomask = 0xb33000,
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0x122000,0x1000,0x0000,0x620000 },
.gpiomute = 0x800000,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
gpio23 -- hef4052:nEnable (0x800000)
gpio12 -- hef4052:A1
gpio13 -- hef4052:A0
0x0000: external audio
0x1000: FM
0x2000: TV
0x3000: n.c.
Note: There exists another variant "Winfast 2000" with tv stereo !?
Note: eeprom only contains FF and pci subsystem id 107d:6606
*/
.needs_tvaudio = 0,
.pll = PLL_28,
.has_radio = 1,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
V4L/DVB (6416): Split hooks on volume and audio mode and rework their handling Also convert audio_mode_gpio functions from audio_hook Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-26 03:53:04 +08:00
.audio_mode_gpio= winfast2000_audio,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.has_remote = 1,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_CHRONOS_VS2] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 3, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0x1800,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0, 0x800, 0x1000, 0x1000 },
.gpiomute = 0x1800,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.pll = PLL_28,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = UNSET,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
/* ---- card 0x24 ---------------------------------- */
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_TYPHOON_TVIEW] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 3, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0x1800,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0, 0x800, 0x1000, 0x1000 },
.gpiomute = 0x1800,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.pll = PLL_28,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = UNSET,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
.has_radio = 1,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_PXELVWPLTVPRO] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Prolink PixelView PlayTV pro",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0xff,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0x21, 0x20, 0x24, 0x2c },
.gpiomute = 0x29,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.no_msp34xx = 1,
.pll = PLL_28,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = UNSET,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_MAGICTVIEW063] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Askey CPH06X TView99",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0x551e00,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 0),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0x551400, 0x551200, 0, 0 },
.gpiomute = 0x551c00,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 1,
.pll = PLL_28,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = TUNER_PHILIPS_PAL_I,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
.has_remote = 1,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_PINNACLE] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Pinnacle PCTV Studio/Rave",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0x03000F,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 2, 0xd0001, 0, 0 },
.gpiomute = 1,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 0,
.pll = PLL_28,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = UNSET,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
/* ---- card 0x28 ---------------------------------- */
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_STB2] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 7,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 4, 0, 2, 3 },
.gpiomute = 1,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.no_msp34xx = 1,
.needs_tvaudio = 1,
.tuner_type = TUNER_PHILIPS_NTSC,
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
.has_radio = 1,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_AVPHONE98] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "AVerMedia TVPhone 98",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 4, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 15,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 13, 4, 11, 7 },
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 1,
.pll = PLL_28,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = UNSET,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
.has_radio = 1,
V4L/DVB (6416): Split hooks on volume and audio mode and rework their handling Also convert audio_mode_gpio functions from audio_hook Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-26 03:53:04 +08:00
.audio_mode_gpio= avermedia_tvphone_audio,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_PV951] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "ProVideo PV951", /* pic16c54 */
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0, 0, 0, 0},
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 1,
.no_msp34xx = 1,
.pll = PLL_28,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = TUNER_PHILIPS_PAL_I,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_ONAIR_TV] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Little OnAir TV",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0xe00b,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 },
.gpiomute = 0xff3ffc,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.no_msp34xx = 1,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = UNSET,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
/* ---- card 0x2c ---------------------------------- */
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_SIGMA_TVII_FM] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Sigma TVII-FM",
.video_inputs = 2,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
.svhs = NO_SVHS,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.gpiomask = 3,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 1, 1, 0, 2 },
.gpiomute = 3,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.no_msp34xx = 1,
.pll = PLL_NONE,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = UNSET,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_MATRIX_VISION2] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "MATRIX-Vision MV-Delta 2",
.video_inputs = 5,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 3,
.gpiomask = 0,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 0, 0),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0 },
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.no_msp34xx = 1,
.pll = PLL_28,
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_ZOLTRIX_GENIE] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Zoltrix Genie TV/FM",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0xbcf03f,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0 },
.gpiomute = 0xbcb03f,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.no_msp34xx = 1,
.pll = PLL_28,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = TUNER_TEMIC_4039FR5_NTSC,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_TERRATVRADIO] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Terratec TV/Radio+",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0x70000,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0x20000, 0x30000, 0x10000, 0 },
.gpiomute = 0x40000,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 1,
.no_msp34xx = 1,
.pll = PLL_35,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = TUNER_PHILIPS_PAL_I,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
.has_radio = 1,
},
/* ---- card 0x30 ---------------------------------- */
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_DYNALINK] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Askey CPH03x/ Dynalink Magic TView",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 15,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = {2,0,0,0 },
.gpiomute = 1,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 1,
.pll = PLL_28,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = UNSET,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_GVBCTV3PCI] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "IODATA GV-BCTV3/PCI",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0x010f00,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 0, 0),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = {0x10000, 0, 0x10000, 0 },
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_ALPS_TSHC6_NTSC,
.tuner_addr = ADDR_UNSET,
V4L/DVB (6416): Split hooks on volume and audio mode and rework their handling Also convert audio_mode_gpio functions from audio_hook Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-26 03:53:04 +08:00
.audio_mode_gpio= gvbctv3pci_audio,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_PXELVWPLTVPAK] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
.video_inputs = 5,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 3,
V4L/DVB (10562): bttv: rework the way digital inputs are indicated The code was using a muxsel value of -1U to indicate a digital input. A couple places in were checking of muxsel < 0 to detect this, which doesn't work of course because muxsel is unsigned and can't be negative. Only a couple cards had digital inputs and it was always the last one, so for the card database create a one bit field that indicates the last input is digital. On init, this is used to set a new field in the bttv struct to the digital input's number or UNSET for none. This makes it easier to check if the current input is digital. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.has_dig_in = 1,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.gpiomask = 0xAA0000,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .digital_mode= DIGITAL_MODE_CAMERA, */
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0x20000, 0, 0x80000, 0x80000 },
.gpiomute = 0xa8000,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL_I,
.tuner_addr = ADDR_UNSET,
.has_remote = 1,
/* GPIO wiring: (different from Rev.4C !)
GPIO17: U4.A0 (first hef4052bt)
GPIO19: U4.A1
GPIO20: U5.A1 (second hef4052bt)
GPIO21: U4.nEN
GPIO22: BT832 Reset Line
GPIO23: A5,A0, U5,nEN
Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
*/
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_EAGLE] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Eagle Wireless Capricorn2 (bt878A)",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 7,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 0, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0, 1, 2, 3 },
.gpiomute = 4,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.pll = PLL_28,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = UNSET /* TUNER_ALPS_TMDH2_NTSC */,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
/* ---- card 0x34 ---------------------------------- */
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_PINNACLEPRO] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* David Härdeman <david@2gen.com> */
.name = "Pinnacle PCTV Studio Pro",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 3,
.gpiomask = 0x03000F,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 1, 0xd0001, 0, 0 },
.gpiomute = 10,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* sound path (5 sources):
MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
0= ext. Audio IN
1= from MUX2
2= Mono TV sound from Tuner
3= not connected
MUX2 (mask 0x30000):
0,2,3= from MSP34xx
1= FM stereo Radio from Tuner */
.needs_tvaudio = 0,
.pll = PLL_28,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = UNSET,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_TVIEW_RDS_FM] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* Claas Langbehn <claas@bigfoot.com>,
Sven Grothklags <sven@upb.de> */
.name = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 3, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0x1c,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0, 0, 0x10, 8 },
.gpiomute = 4,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.has_radio = 1,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_LIFETEC_9415] = {
Convert files to UTF-8 and some cleanups * Convert files to UTF-8. * Also correct some people's names (one example is Eißfeldt, which was found in a source file. Given that the author used an ß at all in a source file indicates that the real name has in fact a 'ß' and not an 'ss', which is commonly used as a substitute for 'ß' when limited to 7bit.) * Correct town names (Goettingen -> Göttingen) * Update Eberhard Mönkeberg's address (http://lkml.org/lkml/2007/1/8/313) Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-20 05:21:04 +08:00
/* Tim Röstermundt <rosterm@uni-muenster.de>
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
in de.comp.os.unix.linux.hardware:
options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
options tuner type=5 */
.name = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0x18e0,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0x0000,0x0800,0x1000,0x1000 },
.gpiomute = 0x18e0,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* For cards with tda9820/tda9821:
0x0000: Tuner normal stereo
0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
0x0880: Tuner A2 stereo */
.pll = PLL_28,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = UNSET,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_BESTBUY_EASYTV] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* Miguel Angel Alvarez <maacruz@navegalia.com>
old Easy TV BT848 version (model CPH031) */
.name = "Askey CPH031/ BESTBUY Easy TV",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0xF,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 0),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 2, 0, 0, 0 },
.gpiomute = 10,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_TEMIC_PAL,
.tuner_addr = ADDR_UNSET,
},
/* ---- card 0x38 ---------------------------------- */
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_FLYVIDEO_98FM] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* Gordon Heydon <gjheydon@bigfoot.com ('98) */
.name = "Lifeview FlyVideo 98FM LR50",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 3, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0x1800,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0, 0x800, 0x1000, 0x1000 },
.gpiomute = 0x1800,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.pll = PLL_28,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = TUNER_PHILIPS_PAL,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
/* This is the ultimate cheapo capture card
* just a BT848A on a small PCB!
* Steve Hosgood <steve@equiinet.com> */
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_GRANDTEC] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "GrandTec 'Grand Video Capture' (Bt848)",
.video_inputs = 2,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 0, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 1,
.gpiomask = 0,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(3, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0 },
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_35,
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_ASKEY_CPH060] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* Daniel Herrington <daniel.herrington@home.com> */
.name = "Askey CPH060/ Phoebe TV Master Only (No FM)",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0xe00,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0x400, 0x400, 0x400, 0x400 },
.gpiomute = 0x800,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_TEMIC_4036FY5_NTSC,
.tuner_addr = ADDR_UNSET,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_ASKEY_CPH03X] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* Matti Mottus <mottus@physic.ut.ee> */
.name = "Askey CPH03x TV Capturer",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0x03000F,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 0),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 2, 0, 0, 0 },
.gpiomute = 1,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.pll = PLL_28,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = TUNER_TEMIC_PAL,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
/* ---- card 0x3c ---------------------------------- */
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_MM100PCTV] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* Philip Blundell <philb@gnu.org> */
.name = "Modular Technology MM100PCTV",
.video_inputs = 2,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 2, */
.svhs = NO_SVHS,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.gpiomask = 11,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 2, 0, 0, 1 },
.gpiomute = 8,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.pll = PLL_35,
.tuner_type = TUNER_TEMIC_PAL,
.tuner_addr = ADDR_UNSET,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_GMV1] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* Adrian Cox <adrian@humboldt.co.uk */
[PATCH] v4l: 800: whitespace cleanups - Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
.name = "AG Electronics GMV1",
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.video_inputs = 2,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 0, */
[PATCH] v4l: 800: whitespace cleanups - Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
.svhs = 1,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.gpiomask = 0xF,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 2),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { },
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.no_msp34xx = 1,
.needs_tvaudio = 0,
[PATCH] v4l: 800: whitespace cleanups - Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
.pll = PLL_28,
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_BESTBUY_EASYTV2] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* Miguel Angel Alvarez <maacruz@navegalia.com>
new Easy TV BT878 version (model CPH061)
special thanks to Informatica Mieres for providing the card */
.name = "Askey CPH061/ BESTBUY Easy TV (bt878)",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 2, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0xFF,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 0),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 1, 0, 4, 4 },
.gpiomute = 9,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_ATI_TVWONDER] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* Lukas Gebauer <geby@volny.cz> */
.name = "ATI TV-Wonder",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0xf03f,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 0),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0xbffe, 0, 0xbfff, 0 },
.gpiomute = 0xbffe,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.pll = PLL_28,
.tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
.tuner_addr = ADDR_UNSET,
},
/* ---- card 0x40 ---------------------------------- */
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_ATI_TVWONDERVE] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* Lukas Gebauer <geby@volny.cz> */
.name = "ATI TV-Wonder VE",
.video_inputs = 2,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
.svhs = NO_SVHS,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.gpiomask = 1,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 0, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0, 0, 1, 0 },
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
.tuner_addr = ADDR_UNSET,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_FLYVIDEO2000] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* DeeJay <deejay@westel900.net (2000S) */
.name = "Lifeview FlyVideo 2000S LR90",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 3, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0x18e0,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 0, 1),
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* Radio changed from 1e80 to 0x800 to make
FlyVideo2000S in .hu happy (gm)*/
/* -dk-???: set mute=0x1800 for tda9874h daughterboard */
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0x0000,0x0800,0x1000,0x1000 },
.gpiomute = 0x1800,
V4L/DVB (6416): Split hooks on volume and audio mode and rework their handling Also convert audio_mode_gpio functions from audio_hook Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-26 03:53:04 +08:00
.audio_mode_gpio= fv2000s_audio,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.no_msp34xx = 1,
.no_tda9875 = 1,
.needs_tvaudio = 1,
.pll = PLL_28,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = TUNER_PHILIPS_PAL,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_TERRATVALUER] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Terratec TValueRadio",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0xffff00,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0x500, 0x500, 0x300, 0x900 },
.gpiomute = 0x900,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.has_radio = 1,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_GVBCTV4PCI] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* TANAKA Kei <peg00625@nifty.com> */
.name = "IODATA GV-BCTV4/PCI",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0x010f00,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 0, 0),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = {0x10000, 0, 0x10000, 0 },
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_SHARP_2U5JF5540_NTSC,
.tuner_addr = ADDR_UNSET,
V4L/DVB (6416): Split hooks on volume and audio mode and rework their handling Also convert audio_mode_gpio functions from audio_hook Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-26 03:53:04 +08:00
.audio_mode_gpio= gvbctv3pci_audio,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
},
/* ---- card 0x44 ---------------------------------- */
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_VOODOOTV_FM] = {
V4L/DVB (5785): Revisited: 3dfx Voodoo TV 200 (US) Fix support for 3dfx Voodoo TV 200 variant Signed-off-by: Wade Berrier <wberrier@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-26 00:02:16 +08:00
.name = "3Dfx VoodooTV FM (Euro)",
/* try "insmod msp3400 simple=0" if you have
* sound problems with this card. */
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
.svhs = NO_SVHS,
V4L/DVB (5785): Revisited: 3dfx Voodoo TV 200 (US) Fix support for 3dfx Voodoo TV 200 variant Signed-off-by: Wade Berrier <wberrier@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-26 00:02:16 +08:00
.gpiomask = 0x4f8a00,
/* 0x100000: 1=MSP enabled (0=disable again)
* 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
.gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff },
.gpiomute = 0x947fff,
/* tvtuner, radio, external,internal, mute, stereo
* tuner, Composit, SVid, Composit-on-Svid-adapter */
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 0, 1),
V4L/DVB (5785): Revisited: 3dfx Voodoo TV 200 (US) Fix support for 3dfx Voodoo TV 200 variant Signed-off-by: Wade Berrier <wberrier@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-26 00:02:16 +08:00
.tuner_type = TUNER_MT2032,
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
.has_radio = 1,
},
[BTTV_BOARD_VOODOOTV_200] = {
.name = "VoodooTV 200 (USA)",
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* try "insmod msp3400 simple=0" if you have
* sound problems with this card. */
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
.svhs = NO_SVHS,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.gpiomask = 0x4f8a00,
/* 0x100000: 1=MSP enabled (0=disable again)
* 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff },
.gpiomute = 0x947fff,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* tvtuner, radio, external,internal, mute, stereo
* tuner, Composit, SVid, Composit-on-Svid-adapter */
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 0, 1),
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_type = TUNER_MT2032,
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
.has_radio = 1,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_AIMMS] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* Philip Blundell <pb@nexus.co.uk> */
.name = "Active Imaging AIMMS",
.video_inputs = 1,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 0, */
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2),
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.gpiomask = 0
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_PV_BT878P_PLUS] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* Tomasz Pyra <hellfire@sedez.iq.pl> */
.name = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 4, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 15,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */
.gpiomute = 13,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 1,
.pll = PLL_28,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = TUNER_LG_PAL_I_FM,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
.has_remote = 1,
/* GPIO wiring:
GPIO0: U4.A0 (hef4052bt)
GPIO1: U4.A1
GPIO2: U4.A1 (second hef4052bt)
GPIO3: U4.nEN, U5.A0, A5.nEN
GPIO8-15: vrd866b ?
*/
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_FLYVIDEO98EZ] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Lifeview FlyVideo 98EZ (capture only) LR51",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 0, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* AV1, AV2, SVHS, CVid adapter on SVHS */
.muxsel = MUXSEL(2, 3, 1, 1),
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.pll = PLL_28,
.no_msp34xx = 1,
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
/* ---- card 0x48 ---------------------------------- */
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_PV_BT878P_9B] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* Dariusz Kowalewski <darekk@automex.pl> */
.name = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0x3f,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0x01, 0x00, 0x03, 0x03 },
.gpiomute = 0x09,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 1,
.no_msp34xx = 1,
.no_tda9875 = 1,
.pll = PLL_28,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = TUNER_PHILIPS_PAL,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
V4L/DVB (6416): Split hooks on volume and audio mode and rework their handling Also convert audio_mode_gpio functions from audio_hook Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-26 03:53:04 +08:00
.audio_mode_gpio= pvbt878p9b_audio, /* Note: not all cards have stereo */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.has_radio = 1, /* Note: not all cards have radio */
.has_remote = 1,
/* GPIO wiring:
GPIO0: A0 hef4052
GPIO1: A1 hef4052
GPIO3: nEN hef4052
GPIO8-15: vrd866b
GPIO20,22,23: R30,R29,R28
*/
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_SENSORAY311] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* Clay Kunz <ckunz@mail.arc.nasa.gov> */
/* you must jumper JP5 for the card to work */
.name = "Sensoray 311",
.video_inputs = 5,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 0, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 4,
.gpiomask = 0,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 0, 0),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0 },
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 0,
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_RV605] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* Miguel Freitas <miguel@cetuc.puc-rio.br> */
.name = "RemoteVision MX (RV605)",
.video_inputs = 16,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 0, */
.svhs = NO_SVHS,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.gpiomask = 0x00,
.gpiomask2 = 0x07ff,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.no_msp34xx = 1,
.no_tda9875 = 1,
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
.muxsel_hook = rv605_muxsel,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_POWERCLR_MTV878] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Powercolor MTV878/ MTV878R/ MTV878F",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 2, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0x1C800F, /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0, 1, 2, 2 },
.gpiomute = 4,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 0,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
.has_radio = 1,
},
/* ---- card 0x4c ---------------------------------- */
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_WINDVR] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* Masaki Suzuki <masaki@btree.org> */
.name = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0x140007,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0, 1, 2, 3 },
.gpiomute = 4,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_type = TUNER_PHILIPS_NTSC,
.tuner_addr = ADDR_UNSET,
V4L/DVB (6416): Split hooks on volume and audio mode and rework their handling Also convert audio_mode_gpio functions from audio_hook Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-26 03:53:04 +08:00
.audio_mode_gpio= windvr_audio,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_GRANDTEC_MULTI] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "GrandTec Multi Capture Card (Bt878)",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 0, */
.svhs = NO_SVHS,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.gpiomask = 0,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 0),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0 },
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_28,
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_KWORLD] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 3, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 7,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* Tuner, SVid, SVHS, SVid to SVHS connector */
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio!
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
* This card lacks external Audio In, so we mute it on Ext. & Int.
* The PCB can take a sbx1637/sbx1673, wiring unknown.
* This card lacks PCI subsystem ID, sigh.
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
* gpiomux =1: lower volume, 2+3: mute
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
* btwincap uses 0x80000/0x80003
*/
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomute = 4,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_28,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = TUNER_PHILIPS_PAL,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
/* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
radio signal strength indicators work fine. */
.has_radio = 1,
/* GPIO Info:
GPIO0,1: HEF4052 A0,A1
GPIO2: HEF4052 nENABLE
GPIO3-7: n.c.
GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
GPIO14,15: ??
GPIO16-21: n.c.
GPIO22,23: ??
?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_DSP_TCVIDEO] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
.name = "DSP Design TCVIDEO",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.svhs = NO_SVHS,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 0),
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.pll = PLL_28,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = UNSET,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
/* ---- card 0x50 ---------------------------------- */
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_HAUPPAUGEPVR] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Hauppauge WinTV PVR",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 0, 1, 1),
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 1,
.pll = PLL_28,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = UNSET,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
.gpiomask = 7,
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = {7},
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_GVBCTV5PCI] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "IODATA GV-BCTV5/PCI",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0x0f0f80,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 0),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = {0x030000, 0x010000, 0, 0 },
.gpiomute = 0x020000,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_NTSC_M,
.tuner_addr = ADDR_UNSET,
V4L/DVB (6416): Split hooks on volume and audio mode and rework their handling Also convert audio_mode_gpio functions from audio_hook Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-26 03:53:04 +08:00
.audio_mode_gpio= gvbctv5pci_audio,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.has_radio = 1,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_OSPREY1x0] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
.video_inputs = 4, /* id-inputs-clock */
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 0, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 3,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(3, 2, 0, 1),
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.pll = PLL_28,
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_OSPREY1x0_848] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 0, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1),
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.pll = PLL_28,
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
},
/* ---- card 0x54 ---------------------------------- */
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_OSPREY101_848] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Osprey 101 (848)", /* 0x05-40C0-C1 */
.video_inputs = 2,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 0, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 1,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(3, 1),
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.pll = PLL_28,
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_OSPREY1x1] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Osprey 101/151", /* 0x1(4|5)-0004-C4 */
.video_inputs = 1,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 0, */
.svhs = NO_SVHS,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(0),
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.pll = PLL_28,
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_OSPREY1x1_SVID] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */
.video_inputs = 2,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 0, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 1,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(0, 1),
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.pll = PLL_28,
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_OSPREY2xx] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */
.video_inputs = 1,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
.svhs = NO_SVHS,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(0),
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.pll = PLL_28,
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
},
/* ---- card 0x58 ---------------------------------- */
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_OSPREY2x0_SVID] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */
.video_inputs = 2,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 1,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(0, 1),
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.pll = PLL_28,
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_OSPREY2x0] = {
V4L/DVB (4058): Bttv: add autodetection support for Osprey 230 - use eeprom data to detect Osprey 230 Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-05-26 13:13:15 +08:00
.name = "Osprey 210/220/230", /* 0x1(A|B)-04C0-C1 */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.video_inputs = 2,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 1,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3),
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.pll = PLL_28,
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_OSPREY500] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Osprey 500", /* 500 */
.video_inputs = 2,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 1,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3),
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.pll = PLL_28,
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_OSPREY540] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Osprey 540", /* 540 */
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.pll = PLL_28,
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
},
/* ---- card 0x5C ---------------------------------- */
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_OSPREY2000] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Osprey 2000", /* 2000 */
.video_inputs = 2,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 1,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3),
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.pll = PLL_28,
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1, /* must avoid, conflicts with the bt860 */
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_IDS_EAGLE] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* M G Berberich <berberic@forwiss.uni-passau.de> */
.name = "IDS Eagle",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 0, */
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.svhs = NO_SVHS,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.gpiomask = 0,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 2, 2, 2),
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.muxsel_hook = eagle_muxsel,
.no_msp34xx = 1,
.no_tda9875 = 1,
.pll = PLL_28,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_PINNACLESAT] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Pinnacle PCTV Sat",
.video_inputs = 2,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 0, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 1,
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(3, 1),
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.pll = PLL_28,
.no_gpioirq = 1,
.has_dvb = 1,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_FORMAC_PROTV] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Formac ProTV II (bt878)",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 3,
.gpiomask = 2,
/* TV, Comp1, Composite over SVID con, SVID */
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 2, 2, 0, 0 },
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.pll = PLL_28,
.has_radio = 1,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
/* sound routing:
GPIO=0x00,0x01,0x03: mute (?)
0x02: both TV and radio (tuner: FM1216/I)
The card has onboard audio connectors labeled "cdrom" and "board",
not soldered here, though unknown wiring.
Card lacks: external audio in, pci subsystem id.
[PATCH] v4l: BTTV updates and card additions - Remove $Id CVS logs for V4L files - Added DVICO FusionHDTV 5 Lite card. - Added Acorp Y878F. - CodingStyle fixes. - Added tuner_addr to bttv cards structure. - linux/version.h replaced by linux/utsname.h on bttvp.h - kernel module for acquiring RDS data from a SAA6588. - Allow multiple open() and reading calls to /dev/radio on bttv-driver.c - added i2c address for lgdt330x. Signed-off-by: Hans J. Koch <koch@hjk-az.de> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:39 +08:00
*/
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
},
/* ---- card 0x60 ---------------------------------- */
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_MACHTV] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "MachTV",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
.svhs = NO_SVHS,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.gpiomask = 7,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0, 1, 2, 3},
.gpiomute = 4,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 1,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = TUNER_PHILIPS_PAL,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
[PATCH] v4l: 711: changed pll 1 to pll pll 28 - Changed { .pll = 1, } to { .pll = PLL_28, } Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:03 +08:00
.pll = PLL_28,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_EURESYS_PICOLO] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Euresys Picolo",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 0, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 0, 1),
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.pll = PLL_28,
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_PV150] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* Luc Van Hoeylandt <luc@e-magic.be> */
.name = "ProVideo PV150", /* 0x4f */
.video_inputs = 2,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 0, */
.svhs = NO_SVHS,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.gpiomask = 0,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0 },
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_28,
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_AD_TVK503] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* Hiroshi Takekawa <sian@big.or.jp> */
/* This card lacks subsystem ID */
.name = "AD-TVK503", /* 0x63 */
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0x001e8007,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 0),
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* Tuner, Radio, external, internal, off, on */
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0x08, 0x0f, 0x0a, 0x08 },
.gpiomute = 0x0f,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_28,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = TUNER_PHILIPS_NTSC,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
V4L/DVB (6416): Split hooks on volume and audio mode and rework their handling Also convert audio_mode_gpio functions from audio_hook Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-26 03:53:04 +08:00
.audio_mode_gpio= adtvk503_audio,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
},
/* ---- card 0x64 ---------------------------------- */
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_HERCULES_SM_TV] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Hercules Smart TV Stereo",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0x00,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 1,
.no_msp34xx = 1,
.pll = PLL_28,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = TUNER_PHILIPS_PAL,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
/* Notes:
- card lacks subsystem ID
- stereo variant w/ daughter board with tda9874a @0xb0
- Audio Routing:
always from tda9874 independent of GPIO (?)
external line in: unknown
- Other chips: em78p156elp @ 0x96 (probably IR remote control)
hef4053 (instead 4052) for unknown function
*/
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_PACETV] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Pace TV & Radio Card",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* Tuner, CVid, SVid, CVid over SVid connector */
.muxsel = MUXSEL(2, 3, 1, 1),
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.gpiomask = 0,
.no_tda9875 = 1,
.no_tda7432 = 1,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = TUNER_PHILIPS_PAL_I,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
.has_radio = 1,
.pll = PLL_28,
/* Bt878, Bt832, FI1246 tuner; no pci subsystem id
only internal line out: (4pin header) RGGL
Radio must be decoded by msp3410d (not routed through)*/
/*
.digital_mode = DIGITAL_MODE_CAMERA, todo!
*/
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_IVC200] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* Chris Willing <chris@vislab.usyd.edu.au> */
.name = "IVC-200",
.video_inputs = 1,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 0, */
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.svhs = NO_SVHS,
V4L/DVB (10299): bttv: Add support for IVCE-8784 support for V4L2 bttv driver It's a quad Bt878 PCI-e x1 capture board that's basically the same as the IVC-200 (quad Bt878 PCI) capture board that's currently supported in the V4L2 bttv driver. Manufacturer's web page for IVCE-8784 with photo and info: http://www.iei.com.tw/en/product_IPC.asp?model=IVCE-8784 Signed-off-by: Douglas Kosovic <douglask@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-23 10:07:26 +08:00
.gpiomask = 0xdf,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2),
V4L/DVB (10299): bttv: Add support for IVCE-8784 support for V4L2 bttv driver It's a quad Bt878 PCI-e x1 capture board that's basically the same as the IVC-200 (quad Bt878 PCI) capture board that's currently supported in the V4L2 bttv driver. Manufacturer's web page for IVCE-8784 with photo and info: http://www.iei.com.tw/en/product_IPC.asp?model=IVCE-8784 Signed-off-by: Douglas Kosovic <douglask@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-23 10:07:26 +08:00
.pll = PLL_28,
},
[BTTV_BOARD_IVCE8784] = {
.name = "IVCE-8784",
.video_inputs = 1,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 0, */
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
V4L/DVB (10299): bttv: Add support for IVCE-8784 support for V4L2 bttv driver It's a quad Bt878 PCI-e x1 capture board that's basically the same as the IVC-200 (quad Bt878 PCI) capture board that's currently supported in the V4L2 bttv driver. Manufacturer's web page for IVCE-8784 with photo and info: http://www.iei.com.tw/en/product_IPC.asp?model=IVCE-8784 Signed-off-by: Douglas Kosovic <douglask@itee.uq.edu.au> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-23 10:07:26 +08:00
.tuner_addr = ADDR_UNSET,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.svhs = NO_SVHS,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.gpiomask = 0xdf,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2),
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.pll = PLL_28,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_XGUARD] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Grand X-Guard / Trust 814PCI",
.video_inputs = 16,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 0, */
.svhs = NO_SVHS,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
.gpiomask2 = 0xff,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0),
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.muxsel_hook = xguard_muxsel,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
.pll = PLL_28,
},
/* ---- card 0x68 ---------------------------------- */
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_NEBULA_DIGITV] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Nebula Electronics DigiTV",
.video_inputs = 1,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.svhs = NO_SVHS,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 0),
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
.pll = PLL_28,
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
.has_dvb = 1,
[PATCH] v4l: (939) Support for nebula rc5 based gpio remote Support for Nebula rc5-based gpio remote. Signed-off-by: Mark Weaver <mark-clist@npsl.co.uk> Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14 08:07:52 +08:00
.has_remote = 1,
.gpiomask = 0x1b,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.no_gpioirq = 1,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_PV143] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* Jorge Boncompte - DTI2 <jorge@dti2.net> */
.name = "ProVideo PV143",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 0, */
.svhs = NO_SVHS,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.gpiomask = 0,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 0),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0 },
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_28,
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
V4L/DVB (9677): bttv: fix some entries on Phytec boards and add missing ones This Patch does modify the bttv-cards.c and bttc.h so that the driver supports VD-011, VD-012, VD-012-X1 and VD-012-X2 Framegrabber from Phytec Messtechnik GmbH. Signed-off-by: Dirk Heer <d.heer@phytec.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-22 06:00:55 +08:00
[BTTV_BOARD_VD009X1_VD011_MINIDIN] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* M.Klahr@phytec.de */
V4L/DVB (9677): bttv: fix some entries on Phytec boards and add missing ones This Patch does modify the bttv-cards.c and bttc.h so that the driver supports VD-011, VD-012, VD-012-X1 and VD-012-X2 Framegrabber from Phytec Messtechnik GmbH. Signed-off-by: Dirk Heer <d.heer@phytec.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-22 06:00:55 +08:00
.name = "PHYTEC VD-009-X1 VD-011 MiniDIN (bt878)",
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 0, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 3,
.gpiomask = 0x00,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 0),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
V4L/DVB (9677): bttv: fix some entries on Phytec boards and add missing ones This Patch does modify the bttv-cards.c and bttc.h so that the driver supports VD-011, VD-012, VD-012-X1 and VD-012-X2 Framegrabber from Phytec Messtechnik GmbH. Signed-off-by: Dirk Heer <d.heer@phytec.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-22 06:00:55 +08:00
.needs_tvaudio = 0,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.pll = PLL_28,
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
V4L/DVB (9677): bttv: fix some entries on Phytec boards and add missing ones This Patch does modify the bttv-cards.c and bttc.h so that the driver supports VD-011, VD-012, VD-012-X1 and VD-012-X2 Framegrabber from Phytec Messtechnik GmbH. Signed-off-by: Dirk Heer <d.heer@phytec.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-22 06:00:55 +08:00
[BTTV_BOARD_VD009X1_VD011_COMBI] = {
.name = "PHYTEC VD-009-X1 VD-011 Combi (bt878)",
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 0, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 3,
.gpiomask = 0x00,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
V4L/DVB (9677): bttv: fix some entries on Phytec boards and add missing ones This Patch does modify the bttv-cards.c and bttc.h so that the driver supports VD-011, VD-012, VD-012-X1 and VD-012-X2 Framegrabber from Phytec Messtechnik GmbH. Signed-off-by: Dirk Heer <d.heer@phytec.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-22 06:00:55 +08:00
.needs_tvaudio = 0,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.pll = PLL_28,
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
/* ---- card 0x6c ---------------------------------- */
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_VD009_MINIDIN] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "PHYTEC VD-009 MiniDIN (bt878)",
.video_inputs = 10,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 0, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 9,
.gpiomask = 0x00,
V4L/DVB (10564): bttv: fix external mux for PHYTEC VD-009 Old versions of the bttv driver would use the high nibble of an input's muxsel value to program the GPIO lines enabled via gpiomask2. Apparently this was supposed to be for switching external audio muxes. Anyway, the code that did this was removed sometime in the pre-git 2.6 series. These phytec boards used this feature to control an external video mux and I guess no one noticed when they removed the code. So add a muxsel_hook for these boards that does the necessary gpio setting. BTW, I doubt the needs_tvaudio setting for these cards is correct. Cc: Dirk Heer <d.heer@phytec.de> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.gpiomask2 = 0x03, /* used for external vodeo mux */
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 0),
V4L/DVB (10564): bttv: fix external mux for PHYTEC VD-009 Old versions of the bttv driver would use the high nibble of an input's muxsel value to program the GPIO lines enabled via gpiomask2. Apparently this was supposed to be for switching external audio muxes. Anyway, the code that did this was removed sometime in the pre-git 2.6 series. These phytec boards used this feature to control an external video mux and I guess no one noticed when they removed the code. So add a muxsel_hook for these boards that does the necessary gpio setting. BTW, I doubt the needs_tvaudio setting for these cards is correct. Cc: Dirk Heer <d.heer@phytec.de> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel_hook = phytec_muxsel,
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 1,
.pll = PLL_28,
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_VD009_COMBI] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "PHYTEC VD-009 Combi (bt878)",
.video_inputs = 10,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 0, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 9,
.gpiomask = 0x00,
V4L/DVB (10564): bttv: fix external mux for PHYTEC VD-009 Old versions of the bttv driver would use the high nibble of an input's muxsel value to program the GPIO lines enabled via gpiomask2. Apparently this was supposed to be for switching external audio muxes. Anyway, the code that did this was removed sometime in the pre-git 2.6 series. These phytec boards used this feature to control an external video mux and I guess no one noticed when they removed the code. So add a muxsel_hook for these boards that does the necessary gpio setting. BTW, I doubt the needs_tvaudio setting for these cards is correct. Cc: Dirk Heer <d.heer@phytec.de> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.gpiomask2 = 0x03, /* used for external vodeo mux */
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1),
V4L/DVB (10564): bttv: fix external mux for PHYTEC VD-009 Old versions of the bttv driver would use the high nibble of an input's muxsel value to program the GPIO lines enabled via gpiomask2. Apparently this was supposed to be for switching external audio muxes. Anyway, the code that did this was removed sometime in the pre-git 2.6 series. These phytec boards used this feature to control an external video mux and I guess no one noticed when they removed the code. So add a muxsel_hook for these boards that does the necessary gpio setting. BTW, I doubt the needs_tvaudio setting for these cards is correct. Cc: Dirk Heer <d.heer@phytec.de> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel_hook = phytec_muxsel,
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 1,
.pll = PLL_28,
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_IVC100] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "IVC-100",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 0, */
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.svhs = NO_SVHS,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.gpiomask = 0xdf,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 0),
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.pll = PLL_28,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_IVC120] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* IVC-120G - Alan Garfield <alan@fromorbit.com> */
.name = "IVC-120G",
.video_inputs = 16,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 0, */
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.svhs = NO_SVHS, /* card has no svhs */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 0,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
.gpiomask = 0x00,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0),
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.muxsel_hook = ivc120_muxsel,
.pll = PLL_28,
},
/* ---- card 0x70 ---------------------------------- */
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_PC_HDTV] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "pcHDTV HD-2000 TV",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 0),
V4L/DVB (7381): tuner: rename TUNER_PHILIPS_ATSC to TUNER_PHILIPS_FCV1236D TUNER_PHILIPS_ATSC is an ambiguous name for a tuner. Rename it to TUNER_PHILIPS_FCV1236D to be more descriptive. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-23 01:46:05 +08:00
.tuner_type = TUNER_PHILIPS_FCV1236D,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
.has_dvb = 1,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_TWINHAN_DST] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Twinhan DST + clones",
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.no_video = 1,
.has_dvb = 1,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_WINFASTVC100] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Winfast VC100",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 0, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 1,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* Vid In, SVid In, Vid over SVid in connector */
.muxsel = MUXSEL(3, 1, 1, 3),
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_TEV560] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Teppro TEV-560/InterVision IV-560",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 3,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 1, 1, 1, 1 },
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 1,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.pll = PLL_35,
},
/* ---- card 0x74 ---------------------------------- */
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_SIMUS_GVC1100] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "SIMUS GVC1100",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 0, */
.svhs = NO_SVHS,
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 2, 2, 2),
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.gpiomask = 0x3F,
.muxsel_hook = gvc1100_muxsel,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_NGSTV_PLUS] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
.name = "NGS NGSTV+",
.video_inputs = 3,
.svhs = 2,
.gpiomask = 0x008007,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 0, 0),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0, 0, 0, 0 },
.gpiomute = 0x000003,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.has_remote = 1,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_LMLBT4] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* http://linuxmedialabs.com */
.name = "LMLBT4",
.video_inputs = 4, /* IN1,IN2,IN3,IN4 */
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 0, */
.svhs = NO_SVHS,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 0),
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
.needs_tvaudio = 0,
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_TEKRAM_M205] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* Helmroos Harri <harri.helmroos@pp.inet.fi> */
.name = "Tekram M205 PRO",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.svhs = 2,
.needs_tvaudio = 0,
.gpiomask = 0x68,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0x68, 0x68, 0x61, 0x61 },
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.pll = PLL_28,
},
/* ---- card 0x78 ---------------------------------- */
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_CONTVFMI] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* Javier Cendan Ares <jcendan@lycos.es> */
/* bt878 TV + FM without subsystem ID */
.name = "Conceptronic CONTVFMi",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0x008007,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0, 1, 2, 2 },
.gpiomute = 3,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.has_remote = 1,
.has_radio = 1,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_PICOLO_TETRA_CHIP] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/*Eric DEBIEF <debief@telemsa.com>*/
/*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controled*/
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
/* adds picolo_tetra_muxsel(), picolo_tetra_init(), the folowing declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/*0x79 in bttv.h*/
.name = "Euresys Picolo Tetra",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 0, */
.svhs = NO_SVHS,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.gpiomask = 0,
.gpiomask2 = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/*878A input is always MUX0, see above.*/
.muxsel = MUXSEL(2, 2, 2, 2),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.pll = PLL_28,
.needs_tvaudio = 0,
.muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_SPIRIT_TV] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* Spirit TV Tuner from http://spiritmodems.com.au */
/* Stafford Goodsell <surge@goliath.homeunix.org> */
.name = "Spirit TV Tuner",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0x0000000f,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0x02, 0x00, 0x00, 0x00 },
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_type = TUNER_TEMIC_PAL,
.tuner_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_AVDVBT_771] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* Wolfram Joost <wojo@frokaschwei.de> */
.name = "AVerMedia AVerTV DVB-T 771",
.video_inputs = 2,
.svhs = 1,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(3, 3),
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
.pll = PLL_28,
.has_dvb = 1,
.no_gpioirq = 1,
.has_remote = 1,
},
/* ---- card 0x7c ---------------------------------- */
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_AVDVBT_761] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* Matt Jesson <dvb@jesson.eclipse.co.uk> */
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
/* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "AverMedia AverTV DVB-T 761",
.video_inputs = 2,
.svhs = 1,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(3, 1, 2, 0), /* Comp0, S-Video, ?, ? */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
.pll = PLL_28,
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
.has_dvb = 1,
.no_gpioirq = 1,
.has_remote = 1,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_MATRIX_VISIONSQ] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* andre.schwarz@matrix-vision.de */
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.name = "MATRIX Vision Sigma-SQ",
.video_inputs = 16,
/* .audio_inputs= 0, */
.svhs = NO_SVHS,
.gpiomask = 0x0,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3),
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel_hook = sigmaSQ_muxsel,
.gpiomux = { 0 },
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_MATRIX_VISIONSLC] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* andre.schwarz@matrix-vision.de */
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.name = "MATRIX Vision Sigma-SLC",
.video_inputs = 4,
/* .audio_inputs= 0, */
.svhs = NO_SVHS,
.gpiomask = 0x0,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 2, 2, 2),
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel_hook = sigmaSLC_muxsel,
.gpiomux = { 0 },
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
/* BTTV_BOARD_APAC_VIEWCOMP */
[BTTV_BOARD_APAC_VIEWCOMP] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* Attila Kondoros <attila.kondoros@chello.hu> */
/* bt878 TV + FM 0x00000000 subsystem ID */
.name = "APAC Viewcomp 878(AMAX)",
.video_inputs = 2,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
.svhs = NO_SVHS,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.gpiomask = 0xFF,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 2, 0, 0, 0 },
.gpiomute = 10,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
.tuner_addr = ADDR_UNSET,
.has_remote = 1, /* miniremote works, see ir-kbd-gpio.c */
.has_radio = 1, /* not every card has radio */
},
/* ---- card 0x80 ---------------------------------- */
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_DVICO_DVBT_LITE] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
.name = "DViCO FusionHDTV DVB-T Lite",
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
.pll = PLL_28,
.no_video = 1,
.has_dvb = 1,
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_VGEAR_MYVCD] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* Steven <photon38@pchome.com.tw> */
.name = "V-Gear MyVCD",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0x3f,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 0),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = {0x31, 0x31, 0x31, 0x31 },
.gpiomute = 0x31,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_NTSC_M,
.tuner_addr = ADDR_UNSET,
.has_radio = 0,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_SUPER_TV] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* Rick C <cryptdragoon@gmail.com> */
.name = "Super TV Tuner",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 0),
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_type = TUNER_PHILIPS_NTSC,
.tuner_addr = ADDR_UNSET,
.gpiomask = 0x008007,
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0, 0x000001,0,0 },
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 1,
.has_radio = 1,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_TIBET_CS16] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* Chris Fanning <video4linux@haydon.net> */
.name = "Tibet Systems 'Progress DVR' CS16",
.video_inputs = 16,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 0, */
.svhs = NO_SVHS,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.pll = PLL_28,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
.muxsel_hook = tibetCS16_muxsel,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_KODICOM_4400R] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* Bill Brack <wbrack@mmm.com.hk> */
/*
* Note that, because of the card's wiring, the "master"
* BT878A chip (i.e. the one which controls the analog switch
* and must use this card type) is the 2nd one detected. The
* other 3 chips should use card type 0x85, whose description
* follows this one. There is a EEPROM on the card (which is
* connected to the I2C of one of those other chips), but is
* not currently handled. There is also a facility for a
* "monitor", which is also not currently implemented.
*/
.name = "Kodicom 4400R (master)",
.video_inputs = 16,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 0, */
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.svhs = NO_SVHS,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* GPIO bits 0-9 used for analog switch:
* 00 - 03: camera selector
* 04 - 06: channel (controller) selector
* 07: data (1->on, 0->off)
* 08: strobe
* 09: reset
* bit 16 is input from sync separator for the channel
*/
.gpiomask = 0x0003ff,
.no_gpioirq = 1,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.pll = PLL_28,
.no_msp34xx = 1,
.no_tda7432 = 1,
.no_tda9875 = 1,
.muxsel_hook = kodicom4400r_muxsel,
},
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_KODICOM_4400R_SL] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* Bill Brack <wbrack@mmm.com.hk> */
/* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
* one which controls the analog switch, and must use the card type)
* is the 2nd one detected. The other 3 chips should use this card
* type
*/
.name = "Kodicom 4400R (slave)",
.video_inputs = 16,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 0, */
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.svhs = NO_SVHS,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.gpiomask = 0x010000,
.no_gpioirq = 1,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.pll = PLL_28,
.no_msp34xx = 1,
.no_tda7432 = 1,
.no_tda9875 = 1,
.muxsel_hook = kodicom4400r_muxsel,
},
/* ---- card 0x86---------------------------------- */
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_ADLINK_RTV24] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* Michael Henson <mhenson@clarityvi.com> */
/* Adlink RTV24 with special unlock codes */
.name = "Adlink RTV24",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 0),
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = UNSET,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
},
/* ---- card 0x87---------------------------------- */
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
/* Michael Krufky <mkrufky@m1k.net> */
.name = "DViCO FusionHDTV 5 Lite",
V4L/DVB (3919): V4l: rename TUNER_LG_TDVS_H062F to TUNER_LG_TDVS_H06XF Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-04-27 12:29:17 +08:00
.tuner_type = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
[PATCH] v4l: 715: enable s video input on dvico fusionhdtv5 lite - Enable S-Video input on DViCO FusionHDTV5 Lite Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:06 +08:00
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1),
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.gpiomask = 0x00e00007,
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0x00400005, 0, 0x00000001, 0 },
.gpiomute = 0x00c00007,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
.has_dvb = 1,
},
/* ---- card 0x88---------------------------------- */
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_ACORP_Y878F] = {
V4L/DVB (3715): Change all emails to the currently used one. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-04-03 18:53:40 +08:00
/* Mauro Carvalho Chehab <mchehab@infradead.org> */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Acorp Y878F",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0x01fe00,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0x001e00, 0, 0x018000, 0x014000 },
.gpiomute = 0x002000,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_YMEC_TVF66T5_B_DFF,
.tuner_addr = 0xc1 >>1,
.has_radio = 1,
},
/* ---- card 0x89 ---------------------------------- */
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = {
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.name = "Conceptronic CTVFMi v2",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.svhs = 2,
.gpiomask = 0x001c0007,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0, 1, 2, 2 },
.gpiomute = 3,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.needs_tvaudio = 0,
.pll = PLL_28,
[PATCH] v4l: 871: fixed bttv to accept radio devices like tea5767 - Fixed bttv to accept radio devices like tea5767 Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:38:21 +08:00
.tuner_type = TUNER_TENA_9533_DI,
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
.tuner_addr = ADDR_UNSET,
.has_remote = 1,
.has_radio = 1,
},
[PATCH] v4l: 703: added new card prolink pixelview playtv mpeg2 pv m4900 - Added new card: Prolink PixelView PlayTV MPEG2 PV-M4900 Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:56 +08:00
/* ---- card 0x8a ---------------------------------- */
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
[BTTV_BOARD_PV_BT878P_2E] = {
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.name = "Prolink Pixelview PV-BT878P+ (Rev.2E)",
.video_inputs = 5,
/* .audio_inputs= 1, */
.svhs = 3,
V4L/DVB (10562): bttv: rework the way digital inputs are indicated The code was using a muxsel value of -1U to indicate a digital input. A couple places in were checking of muxsel < 0 to detect this, which doesn't work of course because muxsel is unsigned and can't be negative. Only a couple cards had digital inputs and it was always the last one, so for the card database create a one bit field that indicates the last input is digital. On init, this is used to set a new field in the bttv struct to the digital input's number or UNSET for none. This makes it easier to check if the current input is digital. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.has_dig_in = 1,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.gpiomask = 0x01fe00,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .digital_mode= DIGITAL_MODE_CAMERA, */
.gpiomux = { 0x00400, 0x10400, 0x04400, 0x80000 },
.gpiomute = 0x12400,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_LG_PAL_FM,
.tuner_addr = ADDR_UNSET,
.has_remote = 1,
[PATCH] v4l: 703: added new card prolink pixelview playtv mpeg2 pv m4900 - Added new card: Prolink PixelView PlayTV MPEG2 PV-M4900 Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:56 +08:00
},
/* ---- card 0x8b ---------------------------------- */
[BTTV_BOARD_PV_M4900] = {
Convert files to UTF-8 and some cleanups * Convert files to UTF-8. * Also correct some people's names (one example is Eißfeldt, which was found in a source file. Given that the author used an ß at all in a source file indicates that the real name has in fact a 'ß' and not an 'ss', which is commonly used as a substitute for 'ß' when limited to 7bit.) * Correct town names (Goettingen -> Göttingen) * Update Eberhard Mönkeberg's address (http://lkml.org/lkml/2007/1/8/313) Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-20 05:21:04 +08:00
/* Sérgio Fortier <sergiofortier@yahoo.com.br> */
[PATCH] v4l: 703: added new card prolink pixelview playtv mpeg2 pv m4900 - Added new card: Prolink PixelView PlayTV MPEG2 PV-M4900 Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:56 +08:00
.name = "Prolink PixelView PlayTV MPEG2 PV-M4900",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 703: added new card prolink pixelview playtv mpeg2 pv m4900 - Added new card: Prolink PixelView PlayTV MPEG2 PV-M4900 Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:56 +08:00
.svhs = 2,
.gpiomask = 0x3f,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0x21, 0x20, 0x24, 0x2c },
.gpiomute = 0x29,
[PATCH] v4l: 703: added new card prolink pixelview playtv mpeg2 pv m4900 - Added new card: Prolink PixelView PlayTV MPEG2 PV-M4900 Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:56 +08:00
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_YMEC_TVF_5533MF,
.tuner_addr = ADDR_UNSET,
.has_radio = 1,
.has_remote = 1,
[PATCH] v4l: 709: added osprey 440 card - Added Osprey 440 card. Signed-off-by: Kenth Andersson <kenth@popwire.com> Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:02 +08:00
},
[PATCH] v4l: 711: changed pll 1 to pll pll 28 - Changed { .pll = 1, } to { .pll = PLL_28, } Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:03 +08:00
/* ---- card 0x8c ---------------------------------- */
V4L/DVB (5899): bttv: Fix Viewcast Osprey 440 support Various gpio and mux settings for the Osprey 440 weren't correct. Fix them and provide some documentation about how the gpios work. The osprey eeprom routine wasn't run for the 440, add it. It was also crap, re-written to be better. Add the Osprey 440 to the Bt878 ALSA driver's whitelist. Currently the sample rate is fixed at 32kHz, as the driver doesn't support different rates for digital input mode, though the card can select the rate from 32, 44.1, or 48 kHz via gpio. Setting the audio gain via ALSA isn't supported yet; a userspace tool that programs the X9221 via i2c-dev must be used. The Bt878 digital audio format isn't programmed correctly for the CS5331A ADC used, resulting in extremely garbled sound. That is fixed in a followup patch. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-22 08:26:40 +08:00
/* Has four Bt878 chips behind a PCI bridge, each chip has:
one external BNC composite input (mux 2)
three internal composite inputs (unknown muxes)
an 18-bit stereo A/D (CS5331A), which has:
one external stereo unblanced (RCA) audio connection
one (or 3?) internal stereo balanced (XLR) audio connection
input is selected via gpio to a 14052B mux
(mask=0x300, unbal=0x000, bal=0x100, ??=0x200,0x300)
gain is controlled via an X9221A chip on the I2C bus @0x28
sample rate is controlled via gpio to an MK1413S
(mask=0x3, 32kHz=0x0, 44.1kHz=0x1, 48kHz=0x2, ??=0x3)
There is neither a tuner nor an svideo input. */
[PATCH] v4l: 709: added osprey 440 card - Added Osprey 440 card. Signed-off-by: Kenth Andersson <kenth@popwire.com> Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:02 +08:00
[BTTV_BOARD_OSPREY440] = {
.name = "Osprey 440",
V4L/DVB (5899): bttv: Fix Viewcast Osprey 440 support Various gpio and mux settings for the Osprey 440 weren't correct. Fix them and provide some documentation about how the gpios work. The osprey eeprom routine wasn't run for the 440, add it. It was also crap, re-written to be better. Add the Osprey 440 to the Bt878 ALSA driver's whitelist. Currently the sample rate is fixed at 32kHz, as the driver doesn't support different rates for digital input mode, though the card can select the rate from 32, 44.1, or 48 kHz via gpio. Setting the audio gain via ALSA isn't supported yet; a userspace tool that programs the X9221 via i2c-dev must be used. The Bt878 digital audio format isn't programmed correctly for the CS5331A ADC used, resulting in extremely garbled sound. That is fixed in a followup patch. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-22 08:26:40 +08:00
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 2, */
.svhs = NO_SVHS,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 0, 1), /* 3,0,1 are guesses */
V4L/DVB (5899): bttv: Fix Viewcast Osprey 440 support Various gpio and mux settings for the Osprey 440 weren't correct. Fix them and provide some documentation about how the gpios work. The osprey eeprom routine wasn't run for the 440, add it. It was also crap, re-written to be better. Add the Osprey 440 to the Bt878 ALSA driver's whitelist. Currently the sample rate is fixed at 32kHz, as the driver doesn't support different rates for digital input mode, though the card can select the rate from 32, 44.1, or 48 kHz via gpio. Setting the audio gain via ALSA isn't supported yet; a userspace tool that programs the X9221 via i2c-dev must be used. The Bt878 digital audio format isn't programmed correctly for the CS5331A ADC used, resulting in extremely garbled sound. That is fixed in a followup patch. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-22 08:26:40 +08:00
.gpiomask = 0x303,
.gpiomute = 0x000, /* int + 32kHz */
.gpiomux = { 0, 0, 0x000, 0x100},
[PATCH] v4l: 709: added osprey 440 card - Added Osprey 440 card. Signed-off-by: Kenth Andersson <kenth@popwire.com> Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:02 +08:00
.pll = PLL_28,
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
[PATCH] v4l: 709: added osprey 440 card - Added Osprey 440 card. Signed-off-by: Kenth Andersson <kenth@popwire.com> Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:02 +08:00
.tuner_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
},
[PATCH] v4l: 794: added asound skyeye bttv card - Added Asound Skyeye bttv card. Signed-off-by: Nickolay V. Shmyrev <<nshmyrev@yandex.ru>> Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:38 +08:00
/* ---- card 0x8d ---------------------------------- */
[BTTV_BOARD_ASOUND_SKYEYE] = {
.name = "Asound Skyeye PCTV",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l: 794: added asound skyeye bttv card - Added Asound Skyeye bttv card. Signed-off-by: Nickolay V. Shmyrev <<nshmyrev@yandex.ru>> Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:38 +08:00
.svhs = 2,
.gpiomask = 15,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 2, 0, 0, 0 },
.gpiomute = 1,
[PATCH] v4l: 794: added asound skyeye bttv card - Added Asound Skyeye bttv card. Signed-off-by: Nickolay V. Shmyrev <<nshmyrev@yandex.ru>> Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:38 +08:00
.needs_tvaudio = 1,
.pll = PLL_28,
V4L/DVB (5806): Bttv: Be consistent in using symbolic names instead of constants For svhs, tuner, and tuner_type, be consistent in using UNSET instead of -1. For tuner_type also consistently use the existing constants: 0 => TUNER_TEMIC_PAL 1 => TUNER_PHILIPS_PAL_I 2 => TUNER_PHILIPS_NTSC 4 => TUNER_ABSENT 5 => TUNER_PHILIPS_PAL 21 => TUNER_TEMIC_4039FR5_NTSC 25 => TUNER_LG_PAL_I_FM Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 05:30:36 +08:00
.tuner_type = TUNER_PHILIPS_NTSC,
[PATCH] v4l: 794: added asound skyeye bttv card - Added Asound Skyeye bttv card. Signed-off-by: Nickolay V. Shmyrev <<nshmyrev@yandex.ru>> Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:38 +08:00
.tuner_addr = ADDR_UNSET,
},
[PATCH] v4l:: (936) Support for sabrent bt848 version Support for Sabrent bt848 version. Signed-off-by: Bill Pechter <pechter@gmail.com> Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14 08:07:50 +08:00
/* ---- card 0x8e ---------------------------------- */
[BTTV_BOARD_SABRENT_TVFM] = {
.name = "Sabrent TV-FM (bttv version)",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
[PATCH] v4l:: (936) Support for sabrent bt848 version Support for Sabrent bt848 version. Signed-off-by: Bill Pechter <pechter@gmail.com> Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14 08:07:50 +08:00
.svhs = 2,
.gpiomask = 0x108007,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 100000, 100002, 100002, 100000 },
[PATCH] v4l:: (936) Support for sabrent bt848 version Support for Sabrent bt848 version. Signed-off-by: Bill Pechter <pechter@gmail.com> Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14 08:07:50 +08:00
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
.pll = PLL_28,
.tuner_type = TUNER_TNF_5335MF,
.tuner_addr = ADDR_UNSET,
.has_radio = 1,
},
V4L (1023): Added Hauppauge ImpactVCB board - Modifications to bttv to support the Hauppauge ImpactVCB product (Model #64900). Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-10 01:25:01 +08:00
/* ---- card 0x8f ---------------------------------- */
[BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = {
.name = "Hauppauge ImpactVCB (bt878)",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 0, */
.svhs = NO_SVHS,
V4L (1023): Added Hauppauge ImpactVCB board - Modifications to bttv to support the Hauppauge ImpactVCB product (Model #64900). Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-10 01:25:01 +08:00
.gpiomask = 0x0f, /* old: 7 */
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(0, 1, 3, 2), /* Composite 0-3 */
V4L (1023): Added Hauppauge ImpactVCB board - Modifications to bttv to support the Hauppauge ImpactVCB product (Model #64900). Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-10 01:25:01 +08:00
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
V4L (1023): Added Hauppauge ImpactVCB board - Modifications to bttv to support the Hauppauge ImpactVCB product (Model #64900). Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-10 01:25:01 +08:00
.tuner_addr = ADDR_UNSET,
},
V4L/DVB (3340): Add bttv card MagicTV (rebranded MachTV) - Add bttv card MagicTV (rebranded MachTV) Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-01-12 05:40:09 +08:00
[BTTV_BOARD_MACHTV_MAGICTV] = {
/* Julian Calaby <julian.calaby@gmail.com>
* Slightly different from original MachTV definition (0x60)
* FIXME: RegSpy says gpiomask should be "0x001c800f", but it
* stuffs up remote chip. Bug is a pin on the jaecs is not set
* properly (methinks) causing no keyup bits being set */
.name = "MagicTV", /* rebranded MachTV */
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
V4L/DVB (3340): Add bttv card MagicTV (rebranded MachTV) - Add bttv card MagicTV (rebranded MachTV) Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-01-12 05:40:09 +08:00
.svhs = 2,
.gpiomask = 7,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
.gpiomux = { 0, 1, 2, 3 },
.gpiomute = 4,
V4L/DVB (3340): Add bttv card MagicTV (rebranded MachTV) - Add bttv card MagicTV (rebranded MachTV) Signed-off-by: Julian Calaby <julian.calaby@gmail.com> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-01-12 05:40:09 +08:00
.tuner_type = TUNER_TEMIC_4009FR5_PAL,
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
.has_radio = 1,
.has_remote = 1,
},
V4L/DVB (5497): Additional card support for bttv driver SSAI (www.ssai.us) makes several Bt878-based capture cards that get used in our surveillance, conferencing, and medical imaging systems. The attached relatively small patch adds support for these cards, which fall into two broad * boards with one or more Bt878s, one or more composite inputs, and no S-video or tuner inputs * boards with one Bt878, one composite input, one S-video input, and no tuner input Signed-off-by: Scott Alfter <salfter@ssai.us> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-03 01:22:39 +08:00
[BTTV_BOARD_SSAI_SECURITY] = {
.name = "SSAI Security Video Interface",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 0, */
.svhs = NO_SVHS,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(0, 1, 2, 3),
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
V4L/DVB (5497): Additional card support for bttv driver SSAI (www.ssai.us) makes several Bt878-based capture cards that get used in our surveillance, conferencing, and medical imaging systems. The attached relatively small patch adds support for these cards, which fall into two broad * boards with one or more Bt878s, one or more composite inputs, and no S-video or tuner inputs * boards with one Bt878, one composite input, one S-video input, and no tuner input Signed-off-by: Scott Alfter <salfter@ssai.us> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-03 01:22:39 +08:00
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_SSAI_ULTRASOUND] = {
.name = "SSAI Ultrasound Video Interface",
.video_inputs = 2,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 0, */
V4L/DVB (5497): Additional card support for bttv driver SSAI (www.ssai.us) makes several Bt878-based capture cards that get used in our surveillance, conferencing, and medical imaging systems. The attached relatively small patch adds support for these cards, which fall into two broad * boards with one or more Bt878s, one or more composite inputs, and no S-video or tuner inputs * boards with one Bt878, one composite input, one S-video input, and no tuner input Signed-off-by: Scott Alfter <salfter@ssai.us> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-03 01:22:39 +08:00
.svhs = 1,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 0, 1, 3),
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
V4L/DVB (5497): Additional card support for bttv driver SSAI (www.ssai.us) makes several Bt878-based capture cards that get used in our surveillance, conferencing, and medical imaging systems. The attached relatively small patch adds support for these cards, which fall into two broad * boards with one or more Bt878s, one or more composite inputs, and no S-video or tuner inputs * boards with one Bt878, one composite input, one S-video input, and no tuner input Signed-off-by: Scott Alfter <salfter@ssai.us> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-04-03 01:22:39 +08:00
.tuner_addr = ADDR_UNSET,
},
V4L/DVB (5803): Bttv: add support for DViCO FusionHDTV 2 add analog video support for DViCO FusionHDTV 2 Thanks to Todd Ignasiak for donating the card. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-28 23:19:20 +08:00
/* ---- card 0x94---------------------------------- */
[BTTV_BOARD_DVICO_FUSIONHDTV_2] = {
.name = "DViCO FusionHDTV 2",
V4L/DVB (7381): tuner: rename TUNER_PHILIPS_ATSC to TUNER_PHILIPS_FCV1236D TUNER_PHILIPS_ATSC is an ambiguous name for a tuner. Rename it to TUNER_PHILIPS_FCV1236D to be more descriptive. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-23 01:46:05 +08:00
.tuner_type = TUNER_PHILIPS_FCV1236D,
V4L/DVB (5803): Bttv: add support for DViCO FusionHDTV 2 add analog video support for DViCO FusionHDTV 2 Thanks to Todd Ignasiak for donating the card. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-28 23:19:20 +08:00
.tuner_addr = ADDR_UNSET,
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
V4L/DVB (5803): Bttv: add support for DViCO FusionHDTV 2 add analog video support for DViCO FusionHDTV 2 Thanks to Todd Ignasiak for donating the card. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-28 23:19:20 +08:00
.svhs = 2,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1),
V4L/DVB (5803): Bttv: add support for DViCO FusionHDTV 2 add analog video support for DViCO FusionHDTV 2 Thanks to Todd Ignasiak for donating the card. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-28 23:19:20 +08:00
.gpiomask = 0x00e00007,
.gpiomux = { 0x00400005, 0, 0x00000001, 0 },
.gpiomute = 0x00c00007,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
},
V4L/DVB (6249): Add Typhoon Tv-Tuner PCI to bttv-cards.c Adds an entry for the Typhoon Tv-Tuner PCI to bttv-cards.c Signed-off-by: Sascha Sommer <saschasommer@freenet.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-02 23:23:39 +08:00
/* ---- card 0x95---------------------------------- */
[BTTV_BOARD_TYPHOON_TVTUNERPCI] = {
.name = "Typhoon TV-Tuner PCI (50684)",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
V4L/DVB (6249): Add Typhoon Tv-Tuner PCI to bttv-cards.c Adds an entry for the Typhoon Tv-Tuner PCI to bttv-cards.c Signed-off-by: Sascha Sommer <saschasommer@freenet.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-02 23:23:39 +08:00
.svhs = 2,
.gpiomask = 0x3014f,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (6249): Add Typhoon Tv-Tuner PCI to bttv-cards.c Adds an entry for the Typhoon Tv-Tuner PCI to bttv-cards.c Signed-off-by: Sascha Sommer <saschasommer@freenet.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-02 23:23:39 +08:00
.gpiomux = { 0x20001,0x10001, 0, 0 },
.gpiomute = 10,
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL_I,
.tuner_addr = ADDR_UNSET,
},
V4L/DVB (7366): Support for a 16-channel bt878 card I have what looks like a Geovision GV-600 (or 650) card. It has a large chip in the middle labeled CONEXANT FUSION 878A 25878-13 E345881.1 0312 TAIWAN It has an audio connector coming out from a chip labeled ATMEL 0242 AT89C2051-24PI It is identified as follows on my Debian GNU/Linux Etch (kernel 2.6.18) ... 01:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 01:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) ... 01:0a.0 0400: 109e:036e (rev 11) Subsystem: 008a:763c Flags: bus master, medium devsel, latency 64, IRQ 58 Memory at dfffe000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 01:0a.1 0480: 109e:0878 (rev 11) Subsystem: 008a:763c Flags: bus master, medium devsel, latency 64, IRQ 58 Memory at dffff000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 It was being detected as a GENERIC UNKNOWN CARD both by the 2.6.18 kernel and the latest v4l-dvb drivers, but it did not work at all. The card has sixteen (16) BNC video inputs, four of them on the board itself and twelve on three daughter-cards. It has a single bt878 chip, no tuner and what looks like and audio input. After doing some research I managed to get only eight channels working by forcing card=125 and those DID NOT match channels 0-7 on the card, and no audio. Based on what was working for card=125, I added the card definition block, added a specific muxsel routine and got the card working fully with xawtv, where the sixteen channels show up as Composite0 to Composite15, matching the channel labels in the card and daughter-cards. I have made no efforts yet to get audio working, but would appreciate any pointers. Signed-off-by: Ernesto Hernández-Novich <emhn@usb.ve> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-23 01:45:58 +08:00
[BTTV_BOARD_GEOVISION_GV600] = {
/* emhn@usb.ve */
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.name = "Geovision GV-600",
.video_inputs = 16,
/* .audio_inputs= 0, */
.svhs = NO_SVHS,
.gpiomask = 0x0,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel_hook = geovision_muxsel,
.gpiomux = { 0 },
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
V4L/DVB (7366): Support for a 16-channel bt878 card I have what looks like a Geovision GV-600 (or 650) card. It has a large chip in the middle labeled CONEXANT FUSION 878A 25878-13 E345881.1 0312 TAIWAN It has an audio connector coming out from a chip labeled ATMEL 0242 AT89C2051-24PI It is identified as follows on my Debian GNU/Linux Etch (kernel 2.6.18) ... 01:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 01:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) ... 01:0a.0 0400: 109e:036e (rev 11) Subsystem: 008a:763c Flags: bus master, medium devsel, latency 64, IRQ 58 Memory at dfffe000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 01:0a.1 0480: 109e:0878 (rev 11) Subsystem: 008a:763c Flags: bus master, medium devsel, latency 64, IRQ 58 Memory at dffff000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 It was being detected as a GENERIC UNKNOWN CARD both by the 2.6.18 kernel and the latest v4l-dvb drivers, but it did not work at all. The card has sixteen (16) BNC video inputs, four of them on the board itself and twelve on three daughter-cards. It has a single bt878 chip, no tuner and what looks like and audio input. After doing some research I managed to get only eight channels working by forcing card=125 and those DID NOT match channels 0-7 on the card, and no audio. Based on what was working for card=125, I added the card definition block, added a specific muxsel routine and got the card working fully with xawtv, where the sixteen channels show up as Composite0 to Composite15, matching the channel labels in the card and daughter-cards. I have made no efforts yet to get audio working, but would appreciate any pointers. Signed-off-by: Ernesto Hernández-Novich <emhn@usb.ve> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-23 01:45:58 +08:00
},
V4L/DVB (7368): bttv: added support for Kozumi KTV-01C card Signed-off-by: Mauro Lacy <mauro@lacy.com.ar> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-23 01:45:58 +08:00
[BTTV_BOARD_KOZUMI_KTV_01C] = {
/* Mauro Lacy <mauro@lacy.com.ar>
* Based on MagicTV and Conceptronic CONTVFMi */
.name = "Kozumi KTV-01C",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
V4L/DVB (7368): bttv: added support for Kozumi KTV-01C card Signed-off-by: Mauro Lacy <mauro@lacy.com.ar> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-23 01:45:58 +08:00
.svhs = 2,
.gpiomask = 0x008007,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1, 1),
V4L/DVB (7368): bttv: added support for Kozumi KTV-01C card Signed-off-by: Mauro Lacy <mauro@lacy.com.ar> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-23 01:45:58 +08:00
.gpiomux = { 0, 1, 2, 2 }, /* CONTVFMi */
.gpiomute = 3, /* CONTVFMi */
.needs_tvaudio = 0,
.tuner_type = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MK3 */
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
.has_radio = 1,
.has_remote = 1,
},
V4L/DVB (8628): bttv: Add support for Encore ENLTV2-FM Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) and CDI Brasil (www.cdibrasil.com.br/) for sponsoring this development. Signed-off-by: Gilberto <gilberto@sistemafenix.com.br> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-08-05 21:14:13 +08:00
[BTTV_BOARD_ENLTV_FM_2] = {
/* Encore TV Tuner Pro ENL TV-FM-2
Mauro Carvalho Chehab <mchehab@infradead.org */
.name = "Encore ENL TV-FM-2",
.video_inputs = 3,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 1, */
V4L/DVB (8628): bttv: Add support for Encore ENLTV2-FM Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) and CDI Brasil (www.cdibrasil.com.br/) for sponsoring this development. Signed-off-by: Gilberto <gilberto@sistemafenix.com.br> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-08-05 21:14:13 +08:00
.svhs = 2,
/* bit 6 -> IR disabled
bit 18/17 = 00 -> mute
01 -> enable external audio input
10 -> internal audio input (mono?)
11 -> internal audio input
*/
.gpiomask = 0x060040,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 3),
V4L/DVB (8628): bttv: Add support for Encore ENLTV2-FM Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) and CDI Brasil (www.cdibrasil.com.br/) for sponsoring this development. Signed-off-by: Gilberto <gilberto@sistemafenix.com.br> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-08-05 21:14:13 +08:00
.gpiomux = { 0x60000, 0x60000, 0x20000, 0x20000 },
.gpiomute = 0,
.tuner_type = TUNER_TCL_MF02GIP_5N,
.tuner_addr = ADDR_UNSET,
.pll = PLL_28,
.has_radio = 1,
.has_remote = 1,
V4L/DVB (9677): bttv: fix some entries on Phytec boards and add missing ones This Patch does modify the bttv-cards.c and bttc.h so that the driver supports VD-011, VD-012, VD-012-X1 and VD-012-X2 Framegrabber from Phytec Messtechnik GmbH. Signed-off-by: Dirk Heer <d.heer@phytec.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-22 06:00:55 +08:00
},
[BTTV_BOARD_VD012] = {
/* D.Heer@Phytec.de */
.name = "PHYTEC VD-012 (bt878)",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 0, */
.svhs = NO_SVHS,
V4L/DVB (9677): bttv: fix some entries on Phytec boards and add missing ones This Patch does modify the bttv-cards.c and bttc.h so that the driver supports VD-011, VD-012, VD-012-X1 and VD-012-X2 Framegrabber from Phytec Messtechnik GmbH. Signed-off-by: Dirk Heer <d.heer@phytec.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-22 06:00:55 +08:00
.gpiomask = 0x00,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(0, 2, 3, 1),
V4L/DVB (9677): bttv: fix some entries on Phytec boards and add missing ones This Patch does modify the bttv-cards.c and bttc.h so that the driver supports VD-011, VD-012, VD-012-X1 and VD-012-X2 Framegrabber from Phytec Messtechnik GmbH. Signed-off-by: Dirk Heer <d.heer@phytec.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-22 06:00:55 +08:00
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
.needs_tvaudio = 0,
.pll = PLL_28,
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
V4L/DVB (9677): bttv: fix some entries on Phytec boards and add missing ones This Patch does modify the bttv-cards.c and bttc.h so that the driver supports VD-011, VD-012, VD-012-X1 and VD-012-X2 Framegrabber from Phytec Messtechnik GmbH. Signed-off-by: Dirk Heer <d.heer@phytec.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-22 06:00:55 +08:00
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_VD012_X1] = {
/* D.Heer@Phytec.de */
.name = "PHYTEC VD-012-X1 (bt878)",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 0, */
V4L/DVB (9677): bttv: fix some entries on Phytec boards and add missing ones This Patch does modify the bttv-cards.c and bttc.h so that the driver supports VD-011, VD-012, VD-012-X1 and VD-012-X2 Framegrabber from Phytec Messtechnik GmbH. Signed-off-by: Dirk Heer <d.heer@phytec.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-22 06:00:55 +08:00
.svhs = 3,
.gpiomask = 0x00,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(2, 3, 1),
V4L/DVB (9677): bttv: fix some entries on Phytec boards and add missing ones This Patch does modify the bttv-cards.c and bttc.h so that the driver supports VD-011, VD-012, VD-012-X1 and VD-012-X2 Framegrabber from Phytec Messtechnik GmbH. Signed-off-by: Dirk Heer <d.heer@phytec.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-22 06:00:55 +08:00
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
.needs_tvaudio = 0,
.pll = PLL_28,
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
V4L/DVB (9677): bttv: fix some entries on Phytec boards and add missing ones This Patch does modify the bttv-cards.c and bttc.h so that the driver supports VD-011, VD-012, VD-012-X1 and VD-012-X2 Framegrabber from Phytec Messtechnik GmbH. Signed-off-by: Dirk Heer <d.heer@phytec.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-22 06:00:55 +08:00
.tuner_addr = ADDR_UNSET,
},
[BTTV_BOARD_VD012_X2] = {
/* D.Heer@Phytec.de */
.name = "PHYTEC VD-012-X2 (bt878)",
.video_inputs = 4,
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* .audio_inputs= 0, */
V4L/DVB (9677): bttv: fix some entries on Phytec boards and add missing ones This Patch does modify the bttv-cards.c and bttc.h so that the driver supports VD-011, VD-012, VD-012-X1 and VD-012-X2 Framegrabber from Phytec Messtechnik GmbH. Signed-off-by: Dirk Heer <d.heer@phytec.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-22 06:00:55 +08:00
.svhs = 3,
.gpiomask = 0x00,
V4L/DVB (10567): bttv: shrink muxsel data in card database Over half of the card database was used to store muxsel data. 64 bytes were used to store one 32 bit word for each of up to 16 inputs. The Bt8x8 only has two bits to control its mux, so muxsel data for 16 inputs will fit into a single 32 bit word. There were a couple cards that had special muxsel data that didn't fit in two bits, but I cleaned them up in earlier patches. Unfortunately, C doesn't allow us to have an array of bit fields. This makes initializing the structure more of a pain. But with some cpp magic, we can do it by changing: .muxsel = { 2, 3, 0, 1 }, .muxsel = { 2, 2, 2, 2, 3, 3, 3, 3, 1, 1 }, Into: .muxsel = MUXSEL(2, 3, 0, 1), .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), That's not so bad. MUXSEL is a fancy macro that packs the arguments (of which there can be one to sixteen!) into a single word two bits at a time. It's a compile time constant (a variadic function wouldn't be) so we can use it to initialize the structure. It's important the the arguments to the macro only be plain decimal integers. Stuff like "0x01", "(2)", or "MUX3" won't work properly. I also created an accessor function, bttv_muxsel(btv, input), that gets the mux bits for the selected input. It makes it cleaner to change the way the muxsel data is stored. This patch doesn't change the code size and decreases the datasegment by 9440 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.muxsel = MUXSEL(3, 2, 1),
V4L/DVB (9677): bttv: fix some entries on Phytec boards and add missing ones This Patch does modify the bttv-cards.c and bttc.h so that the driver supports VD-011, VD-012, VD-012-X1 and VD-012-X2 Framegrabber from Phytec Messtechnik GmbH. Signed-off-by: Dirk Heer <d.heer@phytec.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-22 06:00:55 +08:00
.gpiomux = { 0, 0, 0, 0 }, /* card has no audio */
.needs_tvaudio = 0,
.pll = PLL_28,
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
.tuner_type = TUNER_ABSENT,
V4L/DVB (9677): bttv: fix some entries on Phytec boards and add missing ones This Patch does modify the bttv-cards.c and bttc.h so that the driver supports VD-011, VD-012, VD-012-X1 and VD-012-X2 Framegrabber from Phytec Messtechnik GmbH. Signed-off-by: Dirk Heer <d.heer@phytec.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-11-22 06:00:55 +08:00
.tuner_addr = ADDR_UNSET,
V4L/DVB (10827): Add support for GeoVision GV-800(S) I have a GeoVision GV-800(S) card, it has 4 CONEXANT BT878A chips. It has 16 video inputs and 4 audio inputs, and it is almost identical to the GV-800, as seen on http://bttv-gallery.de . The only difference appears to be the analog mux, it has a CD22M3494 in place of the MT8816AP. The card has a blue PCB, as seen in this picture: http://www.gsbr.com.br/imagem/kits/GeoVision%20GV%20800.jpg . This card wasn't originally supported, and it was detected as UNKNOWN/GENERIC. The video inputs weren't working, so I tried "forcing" a few cards like the GeoVision GV-600, but there was still no video. So I made a patch to support this card, based on the Kodicom 4400r. The GV-800(S) is identified as follows: ... 02:00.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:00.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 02:04.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:04.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 02:08.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:08.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 02:0c.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:0c.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) ... 02:00.0 0400: 109e:036e (rev 11) Subsystem: 800a:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdfff000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 Kernel modules: bttv 02:00.1 0480: 109e:0878 (rev 11) Subsystem: 800a:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffe000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 02:04.0 0400: 109e:036e (rev 11) Subsystem: 800b:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffd000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 Kernel modules: bttv 02:04.1 0480: 109e:0878 (rev 11) Subsystem: 800b:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffc000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 02:08.0 0400: 109e:036e (rev 11) Subsystem: 800c:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffb000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 Kernel modules: bttv 02:08.1 0480: 109e:0878 (rev 11) Subsystem: 800c:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffa000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 02:0c.0 0400: 109e:036e (rev 11) Subsystem: 800d:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdff9000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 Kernel modules: bttv 02:0c.1 0480: 109e:0878 (rev 11) Subsystem: 800d:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdff8000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 As you can see, the GV-800(S) card is almost identical to the GV-800 on bttv-gallery, so this patch might also work for that card. If not, only a few changes should be required on the gv800s_write() function. After this patch, the video inputs work correctly on linux 2.6.24 and 2.6.27 using the software 'motion'. The input order may seem a little odd, but it's the order the original software/driver uses, and I decided to keep that order to get the most out of the card. I tried to get the audio working with the snd-bt87x module, but I only get noise from every audio input, even after selecting a different mux with alsamixer. Also, after trying to play sound from those sources, I randomly get a RISC error about an invalid RISC opcode, and then that output stops working. I also can't change the sampling rate when recording. Any pointers to adding audio support are welcome. Signed-off-by: Bruno Christo <bchristo@inf.ufsm.br> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-03 09:38:59 +08:00
},
[BTTV_BOARD_GEOVISION_GV800S] = {
/* Bruno Christo <bchristo@inf.ufsm.br>
*
* GeoVision GV-800(S) has 4 Conexant Fusion 878A:
* 1 audio input per BT878A = 4 audio inputs
* 4 video inputs per BT878A = 16 video inputs
* This is the first BT878A chip of the GV-800(S). It's the
* "master" chip and it controls the video inputs through an
* analog multiplexer (a CD22M3494) via some GPIO pins. The
* slaves should use card type 0x9e (following this one).
* There is a EEPROM on the card which is currently not handled.
* The audio input is not working yet.
*/
.name = "Geovision GV-800(S) (master)",
.video_inputs = 4,
/* .audio_inputs= 1, */
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.svhs = NO_SVHS,
.gpiomask = 0xf107f,
.no_gpioirq = 1,
.muxsel = MUXSEL(2, 2, 2, 2),
.pll = PLL_28,
.no_msp34xx = 1,
.no_tda7432 = 1,
.no_tda9875 = 1,
.muxsel_hook = gv800s_muxsel,
},
[BTTV_BOARD_GEOVISION_GV800S_SL] = {
/* Bruno Christo <bchristo@inf.ufsm.br>
*
* GeoVision GV-800(S) has 4 Conexant Fusion 878A:
* 1 audio input per BT878A = 4 audio inputs
* 4 video inputs per BT878A = 16 video inputs
* The 3 other BT878A chips are "slave" chips of the GV-800(S)
* and should use this card type.
* The audio input is not working yet.
*/
.name = "Geovision GV-800(S) (slave)",
.video_inputs = 4,
/* .audio_inputs= 1, */
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
.svhs = NO_SVHS,
.gpiomask = 0x00,
.no_gpioirq = 1,
.muxsel = MUXSEL(2, 2, 2, 2),
.pll = PLL_28,
.no_msp34xx = 1,
.no_tda7432 = 1,
.no_tda9875 = 1,
.muxsel_hook = gv800s_muxsel,
},
V4L/DVB (11124): Add support for ProVideo PV-183 to bttv Add support for ProVideo PV-183 to bttv This patch adds support for the ProVideo PV-183 card to the bttv device driver. The PV-183 is a PCI card with 8 BT878 devices plus a Hint Corp HiNT HB4 PCI-PCI Bridge. Each BT878 has two composite input channels available. There are no tuners on this card. Signed-off-by: Alan McIvor <alan.mcivor@reveal.co.nz> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-13 08:43:34 +08:00
[BTTV_BOARD_PV183] = {
.name = "ProVideo PV183", /* 0x9f */
.video_inputs = 2,
/* .audio_inputs= 0, */
.svhs = NO_SVHS,
.gpiomask = 0,
.muxsel = MUXSEL(2, 3),
.gpiomux = { 0 },
.needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_ABSENT,
.tuner_addr = ADDR_UNSET,
},
[PATCH] v4l: 703: added new card prolink pixelview playtv mpeg2 pv m4900 - Added new card: Prolink PixelView PlayTV MPEG2 PV-M4900 Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:56 +08:00
};
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
/* ----------------------------------------------------------------------- */
static unsigned char eeprom_data[256];
/*
* identify card
*/
void __devinit bttv_idcard(struct bttv *btv)
{
unsigned int gpiobits;
int i,type;
unsigned short tmp;
/* read PCI subsystem ID */
pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_ID, &tmp);
btv->cardid = tmp << 16;
pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_VENDOR_ID, &tmp);
btv->cardid |= tmp;
if (0 != btv->cardid && 0xffffffff != btv->cardid) {
/* look for the card */
for (type = -1, i = 0; cards[i].id != 0; i++)
if (cards[i].id == btv->cardid)
type = i;
if (type != -1) {
/* found it */
printk(KERN_INFO "bttv%d: detected: %s [card=%d], "
"PCI subsystem ID is %04x:%04x\n",
btv->c.nr,cards[type].name,cards[type].cardnr,
btv->cardid & 0xffff,
(btv->cardid >> 16) & 0xffff);
btv->c.type = cards[type].cardnr;
} else {
/* 404 */
printk(KERN_INFO "bttv%d: subsystem: %04x:%04x (UNKNOWN)\n",
btv->c.nr, btv->cardid & 0xffff,
(btv->cardid >> 16) & 0xffff);
printk(KERN_DEBUG "please mail id, board name and "
V4L/DVB (11051): v4l-dvb: replace remaining references to the old mailinglist. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-15 02:06:08 +08:00
"the correct card= insmod option to linux-media@vger.kernel.org\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
}
/* let the user override the autodetected type */
if (card[btv->c.nr] < bttv_num_tvcards)
btv->c.type=card[btv->c.nr];
/* print which card config we are using */
printk(KERN_INFO "bttv%d: using: %s [card=%d,%s]\n",btv->c.nr,
bttv_tvcards[btv->c.type].name, btv->c.type,
card[btv->c.nr] < bttv_num_tvcards
? "insmod option" : "autodetected");
/* overwrite gpio stuff ?? */
if (UNSET == audioall && UNSET == audiomux[0])
return;
if (UNSET != audiomux[0]) {
gpiobits = 0;
V4L/DVB (5476): Fix gpiomux array size there were several "magic" for loops, addressing gpiomux array size (4). Adrian Bunk showed that one of the loops were wrong, going from 0 to 4. This patch provides the right fix for this trouble, by using ARRAY_SIZE on all places where we have a for loop using gpiomux. Thanks to: Adrian Bunk <bunk@stusta.de> for pointing me about this trouble. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-03-29 09:37:20 +08:00
for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i];
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
gpiobits |= audiomux[i];
}
} else {
gpiobits = audioall;
V4L/DVB (5476): Fix gpiomux array size there were several "magic" for loops, addressing gpiomux array size (4). Adrian Bunk showed that one of the loops were wrong, going from 0 to 4. This patch provides the right fix for this trouble, by using ARRAY_SIZE on all places where we have a for loop using gpiomux. Thanks to: Adrian Bunk <bunk@stusta.de> for pointing me about this trouble. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-03-29 09:37:20 +08:00
for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
bttv_tvcards[btv->c.type].gpiomux[i] = audioall;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
}
bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
printk(KERN_INFO "bttv%d: gpio config override: mask=0x%x, mux=",
btv->c.nr,bttv_tvcards[btv->c.type].gpiomask);
V4L/DVB (5476): Fix gpiomux array size there were several "magic" for loops, addressing gpiomux array size (4). Adrian Bunk showed that one of the loops were wrong, going from 0 to 4. This patch provides the right fix for this trouble, by using ARRAY_SIZE on all places where we have a for loop using gpiomux. Thanks to: Adrian Bunk <bunk@stusta.de> for pointing me about this trouble. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-03-29 09:37:20 +08:00
for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
V4L/DVB (3577): Cleanup audio input handling Cleanup audio input handling in bttv and tvaudio: - inputs were specified that were never used - mute was handled as a special input which led to confusing code - confusing naming made it difficult to see if the setting was for i2c or gpio. The old audiochip.h input names moved to tvaudio.h. Currently this is used both by tvaudio and msp3400 until the msp3400 implements the new msp3400-specific inputs. Detect in bttv the tvaudio and msp3400 i2c clients and use these client pointers to set the inputs directly instead of broadcasting the command. Removed AUDC_SET_INPUT. Now replaced by VIDIOC_S_AUDIO. This will be replaced again later by the new ROUTING commands. Removed VIDIOC_G_AUDIO implementations in i2c drivers: this command is a user level command and not to be used internally. It wasn't called at all anyway. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-19 08:31:00 +08:00
printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
printk("\n");
}
/*
* (most) board specific initialisations goes here
*/
/* Some Modular Technology cards have an eeprom, but no subsystem ID */
[PATCH] V4L: Makes needlessly global code static This patch makes needlessly global code static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-01 16:51:35 +08:00
static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
int type = -1;
if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13))
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
type = BTTV_BOARD_MODTEC_205;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
else if (0 == strncmp(eeprom_data+20,"Picolo",7))
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
type = BTTV_BOARD_EURESYS_PICOLO;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
[PATCH] v4l: 800: whitespace cleanups - Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (-1 != type) {
btv->c.type = type;
printk("bttv%d: detected by eeprom: %s [card=%d]\n",
btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
}
}
static void flyvideo_gpio(struct bttv *btv)
{
V4L/DVB (8757): v4l-dvb: fix a bunch of sparse warnings Fixed a lot of sparse warnings: mostly warnings about shadowed variables and signed/unsigned mismatches. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-04 04:11:54 +08:00
int gpio, has_remote, has_radio, is_capture_only;
int is_lr90, has_tda9820_tda9821;
int tuner_type = UNSET, ttype;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
gpio_inout(0xffffff, 0);
[PATCH] v4l: BTTV updates and card additions - Remove $Id CVS logs for V4L files - Added DVICO FusionHDTV 5 Lite card. - Added Acorp Y878F. - CodingStyle fixes. - Added tuner_addr to bttv cards structure. - linux/version.h replaced by linux/utsname.h on bttvp.h - kernel module for acquiring RDS data from a SAA6588. - Allow multiple open() and reading calls to /dev/radio on bttv-driver.c - added i2c address for lgdt330x. Signed-off-by: Hans J. Koch <koch@hjk-az.de> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:39 +08:00
udelay(8); /* without this we would see the 0x1800 mask */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
gpio = gpio_read();
/* FIXME: must restore OUR_EN ??? */
[PATCH] v4l: BTTV updates and card additions - Remove $Id CVS logs for V4L files - Added DVICO FusionHDTV 5 Lite card. - Added Acorp Y878F. - CodingStyle fixes. - Added tuner_addr to bttv cards structure. - linux/version.h replaced by linux/utsname.h on bttvp.h - kernel module for acquiring RDS data from a SAA6588. - Allow multiple open() and reading calls to /dev/radio on bttv-driver.c - added i2c address for lgdt330x. Signed-off-by: Hans J. Koch <koch@hjk-az.de> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:39 +08:00
/* all cards provide GPIO info, some have an additional eeprom
* LR50: GPIO coding can be found lower right CP1 .. CP9
* CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
* GPIO14-12: n.c.
* LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] v4l: BTTV updates and card additions - Remove $Id CVS logs for V4L files - Added DVICO FusionHDTV 5 Lite card. - Added Acorp Y878F. - CodingStyle fixes. - Added tuner_addr to bttv cards structure. - linux/version.h replaced by linux/utsname.h on bttvp.h - kernel module for acquiring RDS data from a SAA6588. - Allow multiple open() and reading calls to /dev/radio on bttv-driver.c - added i2c address for lgdt330x. Signed-off-by: Hans J. Koch <koch@hjk-az.de> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:39 +08:00
* lowest 3 bytes are remote control codes (no handshake needed)
* xxxFFF: No remote control chip soldered
* xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
* Note: Some bits are Audio_Mask !
*/
V4L/DVB (8757): v4l-dvb: fix a bunch of sparse warnings Fixed a lot of sparse warnings: mostly warnings about shadowed variables and signed/unsigned mismatches. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-04 04:11:54 +08:00
ttype = (gpio & 0x0f0000) >> 16;
switch (ttype) {
case 0x0:
tuner_type = 2; /* NTSC, e.g. TPI8NSR11P */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
V4L/DVB (8757): v4l-dvb: fix a bunch of sparse warnings Fixed a lot of sparse warnings: mostly warnings about shadowed variables and signed/unsigned mismatches. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-04 04:11:54 +08:00
case 0x2:
tuner_type = 39; /* LG NTSC (newer TAPC series) TAPC-H701P */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
V4L/DVB (8757): v4l-dvb: fix a bunch of sparse warnings Fixed a lot of sparse warnings: mostly warnings about shadowed variables and signed/unsigned mismatches. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-04 04:11:54 +08:00
case 0x4:
tuner_type = 5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
V4L/DVB (8757): v4l-dvb: fix a bunch of sparse warnings Fixed a lot of sparse warnings: mostly warnings about shadowed variables and signed/unsigned mismatches. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-04 04:11:54 +08:00
case 0x6:
tuner_type = 37; /* LG PAL (newer TAPC series) TAPC-G702P */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
V4L/DVB (8757): v4l-dvb: fix a bunch of sparse warnings Fixed a lot of sparse warnings: mostly warnings about shadowed variables and signed/unsigned mismatches. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-04 04:11:54 +08:00
case 0xC:
tuner_type = 3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
default:
printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->c.nr);
V4L/DVB (8757): v4l-dvb: fix a bunch of sparse warnings Fixed a lot of sparse warnings: mostly warnings about shadowed variables and signed/unsigned mismatches. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-04 04:11:54 +08:00
break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
has_remote = gpio & 0x800000;
has_radio = gpio & 0x400000;
[PATCH] v4l: BTTV updates and card additions - Remove $Id CVS logs for V4L files - Added DVICO FusionHDTV 5 Lite card. - Added Acorp Y878F. - CodingStyle fixes. - Added tuner_addr to bttv cards structure. - linux/version.h replaced by linux/utsname.h on bttvp.h - kernel module for acquiring RDS data from a SAA6588. - Allow multiple open() and reading calls to /dev/radio on bttv-driver.c - added i2c address for lgdt330x. Signed-off-by: Hans J. Koch <koch@hjk-az.de> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:39 +08:00
/* unknown 0x200000;
* unknown2 0x100000; */
[PATCH] v4l: 800: whitespace cleanups - Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
is_capture_only = !(gpio & 0x008000); /* GPIO15 */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
has_tda9820_tda9821 = !(gpio & 0x004000);
[PATCH] v4l: BTTV updates and card additions - Remove $Id CVS logs for V4L files - Added DVICO FusionHDTV 5 Lite card. - Added Acorp Y878F. - CodingStyle fixes. - Added tuner_addr to bttv cards structure. - linux/version.h replaced by linux/utsname.h on bttvp.h - kernel module for acquiring RDS data from a SAA6588. - Allow multiple open() and reading calls to /dev/radio on bttv-driver.c - added i2c address for lgdt330x. Signed-off-by: Hans J. Koch <koch@hjk-az.de> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:39 +08:00
is_lr90 = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
/*
* gpio & 0x001000 output bit for audio routing */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
V4L/DVB (8757): v4l-dvb: fix a bunch of sparse warnings Fixed a lot of sparse warnings: mostly warnings about shadowed variables and signed/unsigned mismatches. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-04 04:11:54 +08:00
if (is_capture_only)
tuner_type = TUNER_ABSENT; /* No tuner present */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
V4L/DVB (8757): v4l-dvb: fix a bunch of sparse warnings Fixed a lot of sparse warnings: mostly warnings about shadowed variables and signed/unsigned mismatches. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-04 04:11:54 +08:00
btv->c.nr, has_radio ? "yes" : "no ",
has_remote ? "yes" : "no ", tuner_type, gpio);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
printk(KERN_INFO "bttv%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n",
V4L/DVB (8757): v4l-dvb: fix a bunch of sparse warnings Fixed a lot of sparse warnings: mostly warnings about shadowed variables and signed/unsigned mismatches. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-04 04:11:54 +08:00
btv->c.nr, is_lr90 ? "yes" : "no ",
has_tda9820_tda9821 ? "yes" : "no ",
is_capture_only ? "yes" : "no ");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
V4L/DVB (8757): v4l-dvb: fix a bunch of sparse warnings Fixed a lot of sparse warnings: mostly warnings about shadowed variables and signed/unsigned mismatches. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-04 04:11:54 +08:00
if (tuner_type != UNSET) /* only set if known tuner autodetected, else let insmod option through */
btv->tuner_type = tuner_type;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
btv->has_radio = has_radio;
[PATCH] v4l: BTTV updates and card additions - Remove $Id CVS logs for V4L files - Added DVICO FusionHDTV 5 Lite card. - Added Acorp Y878F. - CodingStyle fixes. - Added tuner_addr to bttv cards structure. - linux/version.h replaced by linux/utsname.h on bttvp.h - kernel module for acquiring RDS data from a SAA6588. - Allow multiple open() and reading calls to /dev/radio on bttv-driver.c - added i2c address for lgdt330x. Signed-off-by: Hans J. Koch <koch@hjk-az.de> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:39 +08:00
/* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
* LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
* Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
V4L/DVB (8757): v4l-dvb: fix a bunch of sparse warnings Fixed a lot of sparse warnings: mostly warnings about shadowed variables and signed/unsigned mismatches. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-04 04:11:54 +08:00
if (has_tda9820_tda9821)
btv->audio_mode_gpio = lt9415_audio;
V4L/DVB (6416): Split hooks on volume and audio mode and rework their handling Also convert audio_mode_gpio functions from audio_hook Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-26 03:53:04 +08:00
/* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
static int miro_tunermap[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1,
14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 };
static int miro_fmtuner[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1,
1,1,1,1, 1,1,1,0, 0,0,0,0, 0,1,0,0 };
static void miro_pinnacle_gpio(struct bttv *btv)
{
int id,msp,gpio;
char *info;
gpio_inout(0xffffff, 0);
[PATCH] v4l: 800: whitespace cleanups - Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
gpio = gpio_read();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
id = ((gpio>>10) & 63) -1;
V4L/DVB (3548): Renamed I2C_foo addresses to I2C_ADDR_foo I2C_foo were used for some i2c addresses. Bad, since those constants could mean other i2c chip things. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-18 19:31:34 +08:00
msp = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (id < 32) {
btv->tuner_type = miro_tunermap[id];
if (0 == (gpio & 0x20)) {
btv->has_radio = 1;
if (!miro_fmtuner[id]) {
btv->has_matchbox = 1;
btv->mbox_we = (1<<6);
btv->mbox_most = (1<<7);
btv->mbox_clk = (1<<8);
btv->mbox_data = (1<<9);
btv->mbox_mask = (1<<6)|(1<<7)|(1<<8)|(1<<9);
}
} else {
btv->has_radio = 0;
}
if (-1 != msp) {
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
if (btv->c.type == BTTV_BOARD_MIRO)
btv->c.type = BTTV_BOARD_MIROPRO;
if (btv->c.type == BTTV_BOARD_PINNACLE)
btv->c.type = BTTV_BOARD_PINNACLEPRO;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
printk(KERN_INFO
"bttv%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
btv->c.nr, id+1, btv->tuner_type,
!btv->has_radio ? "no" :
(btv->has_matchbox ? "matchbox" : "fmtuner"),
(-1 == msp) ? "no" : "yes");
} else {
/* new cards with microtune tuner */
id = 63 - id;
btv->has_radio = 0;
switch (id) {
case 1:
info = "PAL / mono";
V4L/DVB (3105): Remove AUDC_CONFIG_PINNACLE horror, fix mt20xx radio support. - Remove AUDC_CONFIG_PINNACLE horror. This also fixes radio support for mt20xx tuners. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-10 01:25:16 +08:00
btv->tda9887_conf = TDA9887_INTERCARRIER;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
case 2:
info = "PAL+SECAM / stereo";
btv->has_radio = 1;
V4L/DVB (3105): Remove AUDC_CONFIG_PINNACLE horror, fix mt20xx radio support. - Remove AUDC_CONFIG_PINNACLE horror. This also fixes radio support for mt20xx tuners. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-10 01:25:16 +08:00
btv->tda9887_conf = TDA9887_QSS;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
case 3:
info = "NTSC / stereo";
btv->has_radio = 1;
V4L/DVB (3105): Remove AUDC_CONFIG_PINNACLE horror, fix mt20xx radio support. - Remove AUDC_CONFIG_PINNACLE horror. This also fixes radio support for mt20xx tuners. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-10 01:25:16 +08:00
btv->tda9887_conf = TDA9887_QSS;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
case 4:
info = "PAL+SECAM / mono";
V4L/DVB (3105): Remove AUDC_CONFIG_PINNACLE horror, fix mt20xx radio support. - Remove AUDC_CONFIG_PINNACLE horror. This also fixes radio support for mt20xx tuners. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-10 01:25:16 +08:00
btv->tda9887_conf = TDA9887_QSS;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
case 5:
info = "NTSC / mono";
V4L/DVB (3105): Remove AUDC_CONFIG_PINNACLE horror, fix mt20xx radio support. - Remove AUDC_CONFIG_PINNACLE horror. This also fixes radio support for mt20xx tuners. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-10 01:25:16 +08:00
btv->tda9887_conf = TDA9887_INTERCARRIER;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
case 6:
info = "NTSC / stereo";
V4L/DVB (3105): Remove AUDC_CONFIG_PINNACLE horror, fix mt20xx radio support. - Remove AUDC_CONFIG_PINNACLE horror. This also fixes radio support for mt20xx tuners. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-10 01:25:16 +08:00
btv->tda9887_conf = TDA9887_INTERCARRIER;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
case 7:
info = "PAL / stereo";
V4L/DVB (3105): Remove AUDC_CONFIG_PINNACLE horror, fix mt20xx radio support. - Remove AUDC_CONFIG_PINNACLE horror. This also fixes radio support for mt20xx tuners. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-10 01:25:16 +08:00
btv->tda9887_conf = TDA9887_INTERCARRIER;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
default:
info = "oops: unknown card";
break;
}
if (-1 != msp)
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
btv->c.type = BTTV_BOARD_PINNACLEPRO;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
printk(KERN_INFO
"bttv%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
V4L/DVB (3105): Remove AUDC_CONFIG_PINNACLE horror, fix mt20xx radio support. - Remove AUDC_CONFIG_PINNACLE horror. This also fixes radio support for mt20xx tuners. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-10 01:25:16 +08:00
btv->tuner_type = TUNER_MT2032;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
}
/* GPIO21 L: Buffer aktiv, H: Buffer inaktiv */
#define LM1882_SYNC_DRIVE 0x200000L
static void init_ids_eagle(struct bttv *btv)
{
gpio_inout(0xffffff,0xFFFF37);
gpio_write(0x200020);
/* flash strobe inverter ?! */
gpio_write(0x200024);
/* switch sync drive off */
gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
/* set BT848 muxel to 2 */
btaor((2)<<5, ~(2<<5), BT848_IFORM);
}
/* Muxsel helper for the IDS Eagle.
* the eagles does not use the standard muxsel-bits but
* has its own multiplexer */
static void eagle_muxsel(struct bttv *btv, unsigned int input)
{
V4L/DVB (10566): bttv: clean up mux code for IDS Eagle This card apparently uses an external mux and the Bt878's mux should always be set to MUX2. The values for the external mux control bits were stored in the muxsel field. This meant that when changing inputs the driver would switch the Bt878's mux to whatever value the external mux was supposed to be set to, then eagle_muxsel() would switch it back to MUX2 and program the external mux. This creates an unnecessary switch of the Bt878's mux. So change muxsel to be 2 for each input. The external mux bits are just "input&3" so they don't really need to be stored anywhere. This also eliminates the last non-standard use of the muxsel data. Cc: M G Berberich <berberic@fmi.uni-passau.de> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
gpio_bits(3, input & 3);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
V4L/DVB (6125): whitespace cleanup: replace leading spaces with tabs There were many instances of 7-space indents spread throughout the v4l-dvb tree. This patch replaces the 7-space indents with tabs. The whitespace cleaner script doesn't catch these, because it assumes that all indents are 8-space. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-28 05:16:54 +08:00
/* composite */
/* set chroma ADC to sleep */
btor(BT848_ADC_C_SLEEP, BT848_ADC);
/* set to composite video */
btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
/* switch sync drive off */
gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
{
[PATCH] v4l: 800: whitespace cleanups - Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
static const int masks[] = {0x30, 0x01, 0x12, 0x23};
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
gpio_write(masks[input%4]);
}
/* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
alarms output
GPIObit | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1| | |
IN - sensor inputs, INx - sensor inputs and TI XORed together
O1,O2,O3 - alarm outputs (relays)
OUT ENABLE 1 1 0 . 1 1 0 0 . 0 0 0 0 = 0x6C0
*/
static void init_lmlbt4x(struct bttv *btv)
{
printk(KERN_DEBUG "LMLBT4x init\n");
btwrite(0x000000, BT848_GPIO_REG_INP);
gpio_inout(0xffffff, 0x0006C0);
gpio_write(0x000000);
}
static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input)
{
unsigned int inmux = input % 8;
gpio_inout( 0xf, 0xf );
gpio_bits( 0xf, inmux );
}
static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input)
{
unsigned int inmux = input % 4;
gpio_inout( 3<<9, 3<<9 );
gpio_bits( 3<<9, inmux<<9 );
}
V4L/DVB (7366): Support for a 16-channel bt878 card I have what looks like a Geovision GV-600 (or 650) card. It has a large chip in the middle labeled CONEXANT FUSION 878A 25878-13 E345881.1 0312 TAIWAN It has an audio connector coming out from a chip labeled ATMEL 0242 AT89C2051-24PI It is identified as follows on my Debian GNU/Linux Etch (kernel 2.6.18) ... 01:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 01:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) ... 01:0a.0 0400: 109e:036e (rev 11) Subsystem: 008a:763c Flags: bus master, medium devsel, latency 64, IRQ 58 Memory at dfffe000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 01:0a.1 0480: 109e:0878 (rev 11) Subsystem: 008a:763c Flags: bus master, medium devsel, latency 64, IRQ 58 Memory at dffff000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 It was being detected as a GENERIC UNKNOWN CARD both by the 2.6.18 kernel and the latest v4l-dvb drivers, but it did not work at all. The card has sixteen (16) BNC video inputs, four of them on the board itself and twelve on three daughter-cards. It has a single bt878 chip, no tuner and what looks like and audio input. After doing some research I managed to get only eight channels working by forcing card=125 and those DID NOT match channels 0-7 on the card, and no audio. Based on what was working for card=125, I added the card definition block, added a specific muxsel routine and got the card working fully with xawtv, where the sixteen channels show up as Composite0 to Composite15, matching the channel labels in the card and daughter-cards. I have made no efforts yet to get audio working, but would appreciate any pointers. Signed-off-by: Ernesto Hernández-Novich <emhn@usb.ve> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-23 01:45:58 +08:00
static void geovision_muxsel(struct bttv *btv, unsigned int input)
{
unsigned int inmux = input % 16;
gpio_inout(0xf, 0xf);
gpio_bits(0xf, inmux);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* ----------------------------------------------------------------------- */
static void bttv_reset_audio(struct bttv *btv)
{
/*
* BT878A has a audio-reset register.
* 1. This register is an audio reset function but it is in
* function-0 (video capture) address space.
* 2. It is enough to do this once per power-up of the card.
* 3. There is a typo in the Conexant doc -- it is not at
* 0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
* --//Shrikumar 030609
*/
if (btv->id != 878)
return;
if (bttv_debug)
printk("bttv%d: BT878A ARESET\n",btv->c.nr);
btwrite((1<<7), 0x058);
udelay(10);
btwrite( 0, 0x058);
}
/* initialization part one -- before registering i2c bus */
void __devinit bttv_init_card1(struct bttv *btv)
{
switch (btv->c.type) {
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
case BTTV_BOARD_HAUPPAUGE:
case BTTV_BOARD_HAUPPAUGE878:
[PATCH] v4l: 800: whitespace cleanups - Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
boot_msp34xx(btv,5);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
V4L/DVB (5785): Revisited: 3dfx Voodoo TV 200 (US) Fix support for 3dfx Voodoo TV 200 variant Signed-off-by: Wade Berrier <wberrier@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-26 00:02:16 +08:00
case BTTV_BOARD_VOODOOTV_200:
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
case BTTV_BOARD_VOODOOTV_FM:
[PATCH] v4l: 800: whitespace cleanups - Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
boot_msp34xx(btv,20);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
case BTTV_BOARD_AVERMEDIA98:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
boot_msp34xx(btv,11);
break;
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
case BTTV_BOARD_HAUPPAUGEPVR:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
pvr_boot(btv);
break;
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
case BTTV_BOARD_TWINHAN_DST:
case BTTV_BOARD_AVDVBT_771:
case BTTV_BOARD_PINNACLESAT:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
btv->use_i2c_hw = 1;
break;
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
case BTTV_BOARD_ADLINK_RTV24:
[PATCH] v4l: 636: don t enable gpioirq until after card probe - Don't enable gpioirq until after card probe. Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:21 +08:00
init_RTV24( btv );
break;
[PATCH] bttv update This patch synchronizes current bttv support on V4L with linux kernel and adds support to Adlink RTV24 card. It is asked that *every* patch to V4L stuff to be first submitted to video4linux-list@redhat.com. From: "J.A. Magallon" <jamagallon@able.es> struct bttv defined after usage. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Peter Skipworth <pskipworth@clarityvi.com> Signed-off-by: Nickolay V Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 13:04:58 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
if (!bttv_tvcards[btv->c.type].has_dvb)
bttv_reset_audio(btv);
}
/* initialization part two -- after registering i2c bus */
void __devinit bttv_init_card2(struct bttv *btv)
{
[PATCH] v4l: 875: some cleanups at i2c stuff and fixing when tuner addr is set - Some cleanups at I2C stuff and fixing when tuner addr is set. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:38:23 +08:00
int addr=ADDR_UNSET;
[PATCH] v4l: BTTV updates and card additions - Remove $Id CVS logs for V4L files - Added DVICO FusionHDTV 5 Lite card. - Added Acorp Y878F. - CodingStyle fixes. - Added tuner_addr to bttv cards structure. - linux/version.h replaced by linux/utsname.h on bttvp.h - kernel module for acquiring RDS data from a SAA6588. - Allow multiple open() and reading calls to /dev/radio on bttv-driver.c - added i2c address for lgdt330x. Signed-off-by: Hans J. Koch <koch@hjk-az.de> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:39 +08:00
V4L/DVB (5805): Bttv: Fix problems with probing for non-existent tuners The bttv driver has code to detect if a tda9887 is present, that was previous used to auto-load the tda9887 driver. Now there is no tda9887 driver, so the code is pointless; it just figures out if it should load the driver and then does nothing. For cards that are defined as having no tuner, the init code would still do i2c probes for various tuner devices and auto-load the tuner module. That can be skipped for cards that don't need it. The code is made to understand that in addition to 'UNSET', 'TUNER_ABSENT' also means no tuner. The tuner into printk()s are also made nicer. Levels are added, INFO or WARNING, depending on the meaning. For cards with no tuner, or no tuner defined, a more informative message is printed. Card has no tuner, before patch: bttv0: tuner type=-1 or bttv0: tuner type=4 After patch: bttv0: tuner absent Card has a tuner, but the type isn't defined, before patch: bttv0: tuner type=-1 After patch: bttv0: tuner type unset [<- also warning now, as the tuner won't work right] Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 04:51:08 +08:00
btv->tuner_type = UNSET;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
if (BTTV_BOARD_UNKNOWN == btv->c.type) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bttv_readee(btv,eeprom_data,0xa0);
identify_by_eeprom(btv,eeprom_data);
}
switch (btv->c.type) {
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
case BTTV_BOARD_MIRO:
case BTTV_BOARD_MIROPRO:
case BTTV_BOARD_PINNACLE:
case BTTV_BOARD_PINNACLEPRO:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* miro/pinnacle */
miro_pinnacle_gpio(btv);
break;
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
case BTTV_BOARD_FLYVIDEO_98:
case BTTV_BOARD_MAXI:
case BTTV_BOARD_LIFE_FLYKIT:
case BTTV_BOARD_FLYVIDEO:
case BTTV_BOARD_TYPHOON_TVIEW:
case BTTV_BOARD_CHRONOS_VS2:
case BTTV_BOARD_FLYVIDEO_98FM:
case BTTV_BOARD_FLYVIDEO2000:
case BTTV_BOARD_FLYVIDEO98EZ:
case BTTV_BOARD_CONFERENCETV:
case BTTV_BOARD_LIFETEC_9415:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
flyvideo_gpio(btv);
break;
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
case BTTV_BOARD_HAUPPAUGE:
case BTTV_BOARD_HAUPPAUGE878:
case BTTV_BOARD_HAUPPAUGEPVR:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* pick up some config infos from the eeprom */
bttv_readee(btv,eeprom_data,0xa0);
[PATCH] v4l: 800: whitespace cleanups - Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
hauppauge_eeprom(btv);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
case BTTV_BOARD_AVERMEDIA98:
case BTTV_BOARD_AVPHONE98:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bttv_readee(btv,eeprom_data,0xa0);
avermedia_eeprom(btv);
break;
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
case BTTV_BOARD_PXC200:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
init_PXC200(btv);
break;
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
case BTTV_BOARD_PICOLO_TETRA_CHIP:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
picolo_tetra_init(btv);
break;
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
case BTTV_BOARD_VHX:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
btv->has_radio = 1;
btv->has_matchbox = 1;
btv->mbox_we = 0x20;
btv->mbox_most = 0;
btv->mbox_clk = 0x08;
btv->mbox_data = 0x10;
btv->mbox_mask = 0x38;
break;
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
case BTTV_BOARD_VOBIS_BOOSTAR:
case BTTV_BOARD_TERRATV:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
terratec_active_radio_upgrade(btv);
break;
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
case BTTV_BOARD_MAGICTVIEW061:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (btv->cardid == 0x3002144f) {
btv->has_radio=1;
printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->c.nr);
}
break;
V4L/DVB (6125): whitespace cleanup: replace leading spaces with tabs There were many instances of 7-space indents spread throughout the v4l-dvb tree. This patch replaces the 7-space indents with tabs. The whitespace cleaner script doesn't catch these, because it assumes that all indents are 8-space. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-28 05:16:54 +08:00
case BTTV_BOARD_STB2:
[PATCH] v4l: 800: whitespace cleanups - Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
if (btv->cardid == 0x3060121a) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Fix up entry for 3DFX VoodooTV 100,
which is an OEM STB card variant. */
btv->has_radio=0;
btv->tuner_type=TUNER_TEMIC_NTSC;
}
break;
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
case BTTV_BOARD_OSPREY1x0:
case BTTV_BOARD_OSPREY1x0_848:
case BTTV_BOARD_OSPREY101_848:
case BTTV_BOARD_OSPREY1x1:
case BTTV_BOARD_OSPREY1x1_SVID:
case BTTV_BOARD_OSPREY2xx:
case BTTV_BOARD_OSPREY2x0_SVID:
case BTTV_BOARD_OSPREY2x0:
V4L/DVB (5899): bttv: Fix Viewcast Osprey 440 support Various gpio and mux settings for the Osprey 440 weren't correct. Fix them and provide some documentation about how the gpios work. The osprey eeprom routine wasn't run for the 440, add it. It was also crap, re-written to be better. Add the Osprey 440 to the Bt878 ALSA driver's whitelist. Currently the sample rate is fixed at 32kHz, as the driver doesn't support different rates for digital input mode, though the card can select the rate from 32, 44.1, or 48 kHz via gpio. Setting the audio gain via ALSA isn't supported yet; a userspace tool that programs the X9221 via i2c-dev must be used. The Bt878 digital audio format isn't programmed correctly for the CS5331A ADC used, resulting in extremely garbled sound. That is fixed in a followup patch. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-22 08:26:40 +08:00
case BTTV_BOARD_OSPREY440:
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
case BTTV_BOARD_OSPREY500:
case BTTV_BOARD_OSPREY540:
case BTTV_BOARD_OSPREY2000:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bttv_readee(btv,eeprom_data,0xa0);
V4L/DVB (5899): bttv: Fix Viewcast Osprey 440 support Various gpio and mux settings for the Osprey 440 weren't correct. Fix them and provide some documentation about how the gpios work. The osprey eeprom routine wasn't run for the 440, add it. It was also crap, re-written to be better. Add the Osprey 440 to the Bt878 ALSA driver's whitelist. Currently the sample rate is fixed at 32kHz, as the driver doesn't support different rates for digital input mode, though the card can select the rate from 32, 44.1, or 48 kHz via gpio. Setting the audio gain via ALSA isn't supported yet; a userspace tool that programs the X9221 via i2c-dev must be used. The Bt878 digital audio format isn't programmed correctly for the CS5331A ADC used, resulting in extremely garbled sound. That is fixed in a followup patch. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-22 08:26:40 +08:00
osprey_eeprom(btv, eeprom_data);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
break;
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
case BTTV_BOARD_IDS_EAGLE:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
init_ids_eagle(btv);
break;
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
case BTTV_BOARD_MODTEC_205:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bttv_readee(btv,eeprom_data,0xa0);
modtec_eeprom(btv);
break;
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
case BTTV_BOARD_LMLBT4:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
init_lmlbt4x(btv);
break;
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
case BTTV_BOARD_TIBET_CS16:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
tibetCS16_init(btv);
break;
[PATCH] vl4: 693: bttv board renaming - Boards renamed to BTTV_BOARD_xxx Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:52 +08:00
case BTTV_BOARD_KODICOM_4400R:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
kodicom4400r_init(btv);
break;
V4L/DVB (10827): Add support for GeoVision GV-800(S) I have a GeoVision GV-800(S) card, it has 4 CONEXANT BT878A chips. It has 16 video inputs and 4 audio inputs, and it is almost identical to the GV-800, as seen on http://bttv-gallery.de . The only difference appears to be the analog mux, it has a CD22M3494 in place of the MT8816AP. The card has a blue PCB, as seen in this picture: http://www.gsbr.com.br/imagem/kits/GeoVision%20GV%20800.jpg . This card wasn't originally supported, and it was detected as UNKNOWN/GENERIC. The video inputs weren't working, so I tried "forcing" a few cards like the GeoVision GV-600, but there was still no video. So I made a patch to support this card, based on the Kodicom 4400r. The GV-800(S) is identified as follows: ... 02:00.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:00.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 02:04.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:04.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 02:08.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:08.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 02:0c.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:0c.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) ... 02:00.0 0400: 109e:036e (rev 11) Subsystem: 800a:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdfff000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 Kernel modules: bttv 02:00.1 0480: 109e:0878 (rev 11) Subsystem: 800a:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffe000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 02:04.0 0400: 109e:036e (rev 11) Subsystem: 800b:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffd000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 Kernel modules: bttv 02:04.1 0480: 109e:0878 (rev 11) Subsystem: 800b:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffc000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 02:08.0 0400: 109e:036e (rev 11) Subsystem: 800c:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffb000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 Kernel modules: bttv 02:08.1 0480: 109e:0878 (rev 11) Subsystem: 800c:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffa000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 02:0c.0 0400: 109e:036e (rev 11) Subsystem: 800d:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdff9000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 Kernel modules: bttv 02:0c.1 0480: 109e:0878 (rev 11) Subsystem: 800d:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdff8000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 As you can see, the GV-800(S) card is almost identical to the GV-800 on bttv-gallery, so this patch might also work for that card. If not, only a few changes should be required on the gv800s_write() function. After this patch, the video inputs work correctly on linux 2.6.24 and 2.6.27 using the software 'motion'. The input order may seem a little odd, but it's the order the original software/driver uses, and I decided to keep that order to get the most out of the card. I tried to get the audio working with the snd-bt87x module, but I only get noise from every audio input, even after selecting a different mux with alsamixer. Also, after trying to play sound from those sources, I randomly get a RISC error about an invalid RISC opcode, and then that output stops working. I also can't change the sampling rate when recording. Any pointers to adding audio support are welcome. Signed-off-by: Bruno Christo <bchristo@inf.ufsm.br> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-03 09:38:59 +08:00
case BTTV_BOARD_GEOVISION_GV800S:
gv800s_init(btv);
break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
/* pll configuration */
[PATCH] v4l: 800: whitespace cleanups - Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
if (!(btv->id==848 && btv->revision==0x11)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* defaults from card list */
if (PLL_28 == bttv_tvcards[btv->c.type].pll) {
btv->pll.pll_ifreq=28636363;
btv->pll.pll_crystal=BT848_IFORM_XT0;
}
if (PLL_35 == bttv_tvcards[btv->c.type].pll) {
btv->pll.pll_ifreq=35468950;
btv->pll.pll_crystal=BT848_IFORM_XT1;
}
/* insmod options can override */
[PATCH] v4l: 800: whitespace cleanups - Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
switch (pll[btv->c.nr]) {
case 0: /* none */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
btv->pll.pll_crystal = 0;
btv->pll.pll_ifreq = 0;
btv->pll.pll_ofreq = 0;
[PATCH] v4l: 800: whitespace cleanups - Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
break;
case 1: /* 28 MHz */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
case 28:
[PATCH] v4l: 800: whitespace cleanups - Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
btv->pll.pll_ifreq = 28636363;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
btv->pll.pll_ofreq = 0;
[PATCH] v4l: 800: whitespace cleanups - Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
btv->pll.pll_crystal = BT848_IFORM_XT0;
break;
case 2: /* 35 MHz */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
case 35:
[PATCH] v4l: 800: whitespace cleanups - Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
btv->pll.pll_ifreq = 35468950;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
btv->pll.pll_ofreq = 0;
[PATCH] v4l: 800: whitespace cleanups - Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
btv->pll.pll_crystal = BT848_IFORM_XT1;
break;
}
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
btv->pll.pll_current = -1;
/* tuner configuration (from card list / autodetect / insmod option) */
[PATCH] v4l: BTTV updates and card additions - Remove $Id CVS logs for V4L files - Added DVICO FusionHDTV 5 Lite card. - Added Acorp Y878F. - CodingStyle fixes. - Added tuner_addr to bttv cards structure. - linux/version.h replaced by linux/utsname.h on bttvp.h - kernel module for acquiring RDS data from a SAA6588. - Allow multiple open() and reading calls to /dev/radio on bttv-driver.c - added i2c address for lgdt330x. Signed-off-by: Hans J. Koch <koch@hjk-az.de> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:39 +08:00
if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
addr = bttv_tvcards[btv->c.type].tuner_addr;
if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
if (UNSET == btv->tuner_type)
[PATCH] v4l: 800: whitespace cleanups - Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (UNSET != tuner[btv->c.nr])
btv->tuner_type = tuner[btv->c.nr];
V4L/DVB (5805): Bttv: Fix problems with probing for non-existent tuners The bttv driver has code to detect if a tda9887 is present, that was previous used to auto-load the tda9887 driver. Now there is no tda9887 driver, so the code is pointless; it just figures out if it should load the driver and then does nothing. For cards that are defined as having no tuner, the init code would still do i2c probes for various tuner devices and auto-load the tuner module. That can be skipped for cards that don't need it. The code is made to understand that in addition to 'UNSET', 'TUNER_ABSENT' also means no tuner. The tuner into printk()s are also made nicer. Levels are added, INFO or WARNING, depending on the meaning. For cards with no tuner, or no tuner defined, a more informative message is printed. Card has no tuner, before patch: bttv0: tuner type=-1 or bttv0: tuner type=4 After patch: bttv0: tuner absent Card has a tuner, but the type isn't defined, before patch: bttv0: tuner type=-1 After patch: bttv0: tuner type unset [<- also warning now, as the tuner won't work right] Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 04:51:08 +08:00
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
if (btv->tuner_type == TUNER_ABSENT)
V4L/DVB (5805): Bttv: Fix problems with probing for non-existent tuners The bttv driver has code to detect if a tda9887 is present, that was previous used to auto-load the tda9887 driver. Now there is no tda9887 driver, so the code is pointless; it just figures out if it should load the driver and then does nothing. For cards that are defined as having no tuner, the init code would still do i2c probes for various tuner devices and auto-load the tuner module. That can be skipped for cards that don't need it. The code is made to understand that in addition to 'UNSET', 'TUNER_ABSENT' also means no tuner. The tuner into printk()s are also made nicer. Levels are added, INFO or WARNING, depending on the meaning. For cards with no tuner, or no tuner defined, a more informative message is printed. Card has no tuner, before patch: bttv0: tuner type=-1 or bttv0: tuner type=4 After patch: bttv0: tuner absent Card has a tuner, but the type isn't defined, before patch: bttv0: tuner type=-1 After patch: bttv0: tuner type unset [<- also warning now, as the tuner won't work right] Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 04:51:08 +08:00
printk(KERN_INFO "bttv%d: tuner absent\n", btv->c.nr);
else if(btv->tuner_type == UNSET)
printk(KERN_WARNING "bttv%d: tuner type unset\n", btv->c.nr);
else
printk(KERN_INFO "bttv%d: tuner type=%d\n", btv->c.nr,
btv->tuner_type);
[PATCH] v4l: 875: some cleanups at i2c stuff and fixing when tuner addr is set - Some cleanups at I2C stuff and fixing when tuner addr is set. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:38:23 +08:00
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
if (UNSET == btv->tuner_type)
btv->tuner_type = TUNER_ABSENT;
if (btv->tuner_type != TUNER_ABSENT) {
[PATCH] v4l: 800: whitespace cleanups - Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
struct tuner_setup tun_setup;
[PATCH] v4l: BTTV update - use DMA_32BIT_MASK. - Rename tuner structures fields. - Tail spaces removed. - I2C cleanups and converged to a basic reference structure. - Removed unused structures. - Removed BTTV version check. Signed-off-by: <domen@coderock.org> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-Off-By: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-13 04:58:42 +08:00
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* Load tuner module before issuing tuner config call! */
if (autoload)
request_module("tuner");
[PATCH] v4l: 875: some cleanups at i2c stuff and fixing when tuner addr is set - Some cleanups at I2C stuff and fixing when tuner addr is set. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:38:23 +08:00
tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
[PATCH] v4l: BTTV update - use DMA_32BIT_MASK. - Rename tuner structures fields. - Tail spaces removed. - I2C cleanups and converged to a basic reference structure. - Removed unused structures. - Removed BTTV version check. Signed-off-by: <domen@coderock.org> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-Off-By: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-13 04:58:42 +08:00
tun_setup.type = btv->tuner_type;
[PATCH] v4l: BTTV updates and card additions - Remove $Id CVS logs for V4L files - Added DVICO FusionHDTV 5 Lite card. - Added Acorp Y878F. - CodingStyle fixes. - Added tuner_addr to bttv cards structure. - linux/version.h replaced by linux/utsname.h on bttvp.h - kernel module for acquiring RDS data from a SAA6588. - Allow multiple open() and reading calls to /dev/radio on bttv-driver.c - added i2c address for lgdt330x. Signed-off-by: Hans J. Koch <koch@hjk-az.de> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:39 +08:00
tun_setup.addr = addr;
[PATCH] v4l: BTTV update - use DMA_32BIT_MASK. - Rename tuner structures fields. - Tail spaces removed. - I2C cleanups and converged to a basic reference structure. - Removed unused structures. - Removed BTTV version check. Signed-off-by: <domen@coderock.org> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-Off-By: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-13 04:58:42 +08:00
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
if (bttv_tvcards[btv->c.type].has_radio)
tun_setup.mode_mask |= T_RADIO;
[PATCH] v4l: BTTV update - use DMA_32BIT_MASK. - Rename tuner structures fields. - Tail spaces removed. - I2C cleanups and converged to a basic reference structure. - Removed unused structures. - Removed BTTV version check. Signed-off-by: <domen@coderock.org> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-Off-By: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-13 04:58:42 +08:00
bttv_call_i2c_clients(btv, TUNER_SET_TYPE_ADDR, &tun_setup);
}
V4L/DVB (3105): Remove AUDC_CONFIG_PINNACLE horror, fix mt20xx radio support. - Remove AUDC_CONFIG_PINNACLE horror. This also fixes radio support for mt20xx tuners. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-10 01:25:16 +08:00
if (btv->tda9887_conf) {
V4L/DVB (6384): Replace TDA9887_SET_CONFIG by TUNER_SET_CONFIG Currently, the only tuner-specific device that allows special configurations is tda9887. However, tea5767 also may require some special configurations (for example, to specify a different Xtal freq). This patch replaces TDA9887_SET_CONFIG by a more generic internal ioctl (TUNER_SET_CONFIG). The newer one allows specifying what tuner is appliable to a configuration set, and allows an arbitrary configuration struct. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-19 06:56:47 +08:00
struct v4l2_priv_tun_config tda9887_cfg;
tda9887_cfg.tuner = TUNER_TDA9887;
tda9887_cfg.priv = &btv->tda9887_conf;
bttv_call_i2c_clients(btv, TUNER_SET_CONFIG, &tda9887_cfg);
[PATCH] v4l: 875: some cleanups at i2c stuff and fixing when tuner addr is set - Some cleanups at I2C stuff and fixing when tuner addr is set. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:38:23 +08:00
}
V4L/DVB (10562): bttv: rework the way digital inputs are indicated The code was using a muxsel value of -1U to indicate a digital input. A couple places in were checking of muxsel < 0 to detect this, which doesn't work of course because muxsel is unsigned and can't be negative. Only a couple cards had digital inputs and it was always the last one, so for the card database create a one bit field that indicates the last input is digital. On init, this is used to set a new field in the bttv struct to the digital input's number or UNSET for none. This makes it easier to check if the current input is digital. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
btv->dig = bttv_tvcards[btv->c.type].has_dig_in ?
bttv_tvcards[btv->c.type].video_inputs - 1 : UNSET;
V4L/DVB (10561): bttv: store card database more efficiently The bttv card database is quite large and the data structure used to store it wasn't very efficient. Most of the field are only used at card initialization time so it doesn't matter if they aren't efficient to access. Overall the changes reduce code size by 60 bytes in ia32. The data size is decreased by 5024 byes. It is probably even more for 64-bit kernels. Move the fields in the struct around to be sorted from largest to smallest. This saves on padding space used for alignment. Get rid of the unused digital_mode field. Leave the setting as a comment in the few cards entries that set it, in case someone ever writes the code. Get rid of the unused audio_inputs field. Leave the values in the card entries in case someone ever writes code that might use it. Get ride of the unused radio_addr field. No card entries even set it to anything interesting so it's not left as comments. All the code that used it was removed in commit v2.6.14-3466-g291d1d7 from Nov 8th 2005. Reduce video_inputs to u8 as no card has more than 255 inputs (the most is 16). Change tuner_addr to u8. I2C addresses are only seven bits and 255 means ADDR_UNSET, so everything fits. Make has_radio a one bit flag. Make the pll setting a two bit field. Reduce svhs to four bits as no card has an s-video input above 9. Change the value for no s-video input from UNSET (which is -1U and out of range of four bits) to NO_SVHS (which is now 15). Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
btv->svhs = bttv_tvcards[btv->c.type].svhs == NO_SVHS ?
UNSET : bttv_tvcards[btv->c.type].svhs;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (svhs[btv->c.nr] != UNSET)
btv->svhs = svhs[btv->c.nr];
if (remote[btv->c.nr] != UNSET)
btv->has_remote = remote[btv->c.nr];
if (bttv_tvcards[btv->c.type].has_radio)
btv->has_radio=1;
if (bttv_tvcards[btv->c.type].has_remote)
btv->has_remote=1;
[PATCH] v4l: 636: don t enable gpioirq until after card probe - Don't enable gpioirq until after card probe. Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:21 +08:00
if (!bttv_tvcards[btv->c.type].no_gpioirq)
btv->gpioirq=1;
V4L/DVB (6416): Split hooks on volume and audio mode and rework their handling Also convert audio_mode_gpio functions from audio_hook Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-08-26 03:53:04 +08:00
if (bttv_tvcards[btv->c.type].volume_gpio)
btv->volume_gpio=bttv_tvcards[btv->c.type].volume_gpio;
if (bttv_tvcards[btv->c.type].audio_mode_gpio)
btv->audio_mode_gpio=bttv_tvcards[btv->c.type].audio_mode_gpio;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!autoload)
return;
V4L/DVB (10560): bttv: make tuner card info more consistent The bttv card database structure had a "tuner" field that was the input number of the tuner input or UNSET for no tuner. However, the only values it could ever be are 0 and UNSET. Having a tuner on an input other than 0 didn't work and was never used. There is also a "tuner_type" field that can be set to TUNER_ABSENT to indicate no tuner, which makes "tuner = UNSET" redundant. In many cases, tuner_type was set to UNSET when there was no tuner, which isn't quite correct. tuner_type == UNSET is supposed to mean the tuner type isn't yet known. So, I changed cards where "tuner == UNSET" to always have tuner_type of TUNER_ABSENT. At this point the tuner field is redundant, so I deleted it. I have the card setup code set the card's tuner_type (not the card type's tuner_type!) to TUNER_ABSENT if it hasn't yet been set at the end of the setup code. Various places that check if the card has a tuner will now look for this instead of checking the card type's "tuner" field. Also autoload the tuner module before issuing the TUNER_SET_TYPE_ADDR I2C client call instead of after issuing it. Overall, on ia32 this decreases compiled code size by about 24 bytes and reduces the data size by 640 bytes. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
if (btv->tuner_type == TUNER_ABSENT)
V4L/DVB (5805): Bttv: Fix problems with probing for non-existent tuners The bttv driver has code to detect if a tda9887 is present, that was previous used to auto-load the tda9887 driver. Now there is no tda9887 driver, so the code is pointless; it just figures out if it should load the driver and then does nothing. For cards that are defined as having no tuner, the init code would still do i2c probes for various tuner devices and auto-load the tuner module. That can be skipped for cards that don't need it. The code is made to understand that in addition to 'UNSET', 'TUNER_ABSENT' also means no tuner. The tuner into printk()s are also made nicer. Levels are added, INFO or WARNING, depending on the meaning. For cards with no tuner, or no tuner defined, a more informative message is printed. Card has no tuner, before patch: bttv0: tuner type=-1 or bttv0: tuner type=4 After patch: bttv0: tuner absent Card has a tuner, but the type isn't defined, before patch: bttv0: tuner type=-1 After patch: bttv0: tuner type unset [<- also warning now, as the tuner won't work right] Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-06-29 04:51:08 +08:00
return; /* no tuner or related drivers to load */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* try to detect audio/fader chips */
if (!bttv_tvcards[btv->c.type].no_msp34xx &&
V4L/DVB (3548): Renamed I2C_foo addresses to I2C_ADDR_foo I2C_foo were used for some i2c addresses. Bad, since those constants could mean other i2c chip things. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-18 19:31:34 +08:00
bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx") >=0)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
request_module("msp3400");
if (bttv_tvcards[btv->c.type].msp34xx_alt &&
V4L/DVB (3548): Renamed I2C_foo addresses to I2C_ADDR_foo I2C_foo were used for some i2c addresses. Bad, since those constants could mean other i2c chip things. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-18 19:31:34 +08:00
bttv_I2CRead(btv, I2C_ADDR_MSP3400_ALT, "MSP34xx (alternate address)") >=0)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
request_module("msp3400");
if (!bttv_tvcards[btv->c.type].no_tda9875 &&
V4L/DVB (3548): Renamed I2C_foo addresses to I2C_ADDR_foo I2C_foo were used for some i2c addresses. Bad, since those constants could mean other i2c chip things. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-18 19:31:34 +08:00
bttv_I2CRead(btv, I2C_ADDR_TDA9875, "TDA9875") >=0)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
request_module("tda9875");
if (!bttv_tvcards[btv->c.type].no_tda7432 &&
V4L/DVB (3548): Renamed I2C_foo addresses to I2C_ADDR_foo I2C_foo were used for some i2c addresses. Bad, since those constants could mean other i2c chip things. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-18 19:31:34 +08:00
bttv_I2CRead(btv, I2C_ADDR_TDA7432, "TDA7432") >=0)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
request_module("tda7432");
if (bttv_tvcards[btv->c.type].needs_tvaudio)
request_module("tvaudio");
}
/* ----------------------------------------------------------------------- */
static void modtec_eeprom(struct bttv *btv)
{
if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
btv->c.nr,&eeprom_data[0x1e]);
} else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
[PATCH] v4l: 800: whitespace cleanups - Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
btv->c.nr,&eeprom_data[0x1e]);
} else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
btv->tuner_type=TUNER_PHILIPS_NTSC;
printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n",
btv->c.nr,&eeprom_data[0x1e]);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} else {
printk("bttv%d: Modtec: Unknown TunerString: %s\n",
btv->c.nr,&eeprom_data[0x1e]);
}
}
static void __devinit hauppauge_eeprom(struct bttv *btv)
{
struct tveeprom tv;
[PATCH] v4l: tveeprom improved to support newer Hauppage cards - tveeprom improved and updated to reflect newer Hauppage cards. - CodingStyle fixes. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:04:05 +08:00
tveeprom_hauppauge_analog(&btv->i2c_client, &tv, eeprom_data);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
btv->tuner_type = tv.tuner_type;
btv->has_radio = tv.has_radio;
V4L (1023): Added Hauppauge ImpactVCB board - Modifications to bttv to support the Hauppauge ImpactVCB product (Model #64900). Signed-off-by: Steven Toth <stoth@hauppauge.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
2006-01-10 01:25:01 +08:00
printk("bttv%d: Hauppauge eeprom indicates model#%d\n",
btv->c.nr, tv.model);
/*
* Some of the 878 boards have duplicate PCI IDs. Switch the board
* type based on model #.
*/
if(tv.model == 64900) {
printk("bttv%d: Switching board type from %s to %s\n",
btv->c.nr,
bttv_tvcards[btv->c.type].name,
bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
static int terratec_active_radio_upgrade(struct bttv *btv)
{
int freq;
btv->has_radio = 1;
btv->has_matchbox = 1;
btv->mbox_we = 0x10;
btv->mbox_most = 0x20;
btv->mbox_clk = 0x08;
btv->mbox_data = 0x04;
btv->mbox_mask = 0x3c;
btv->mbox_iow = 1 << 8;
btv->mbox_ior = 1 << 9;
btv->mbox_csel = 1 << 10;
freq=88000/62.5;
[PATCH] v4l: BTTV updates and card additions - Remove $Id CVS logs for V4L files - Added DVICO FusionHDTV 5 Lite card. - Added Acorp Y878F. - CodingStyle fixes. - Added tuner_addr to bttv cards structure. - linux/version.h replaced by linux/utsname.h on bttvp.h - kernel module for acquiring RDS data from a SAA6588. - Allow multiple open() and reading calls to /dev/radio on bttv-driver.c - added i2c address for lgdt330x. Signed-off-by: Hans J. Koch <koch@hjk-az.de> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:39 +08:00
tea5757_write(btv, 5 * freq + 0x358); /* write 0x1ed8 */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (0x1ed8 == tea5757_read(btv)) {
printk("bttv%d: Terratec Active Radio Upgrade found.\n",
btv->c.nr);
btv->has_radio = 1;
btv->has_matchbox = 1;
} else {
btv->has_radio = 0;
btv->has_matchbox = 0;
}
return 0;
}
/* ----------------------------------------------------------------------- */
/*
* minimal bootstrap for the WinTV/PVR -- upload altera firmware.
*
* The hcwamc.rbf firmware file is on the Hauppauge driver CD. Have
* a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
* unpacked with unzip).
*/
#define PVR_GPIO_DELAY 10
#define BTTV_ALT_DATA 0x000001
#define BTTV_ALT_DCLK 0x100000
#define BTTV_ALT_NCONFIG 0x800000
bt8xx: treat firmware data as const Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-05-24 07:11:44 +08:00
static int __devinit pvr_altera_load(struct bttv *btv, const u8 *micro,
u32 microlen)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
u32 n;
[PATCH] v4l: 800: whitespace cleanups - Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
u8 bits;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int i;
gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG);
gpio_write(0);
udelay(PVR_GPIO_DELAY);
gpio_write(BTTV_ALT_NCONFIG);
udelay(PVR_GPIO_DELAY);
for (n = 0; n < microlen; n++) {
bits = micro[n];
V4L/DVB (5477): CodingStyle cleanups on for loops at bttv-cards.c Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-03-29 09:37:23 +08:00
for (i = 0 ; i < 8 ; i++) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
gpio_bits(BTTV_ALT_DCLK,0);
if (bits & 0x01)
gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
else
gpio_bits(BTTV_ALT_DATA,0);
gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
bits >>= 1;
}
}
gpio_bits(BTTV_ALT_DCLK,0);
udelay(PVR_GPIO_DELAY);
/* begin Altera init loop (Not necessary,but doesn't hurt) */
for (i = 0 ; i < 30 ; i++) {
gpio_bits(BTTV_ALT_DCLK,0);
gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
}
gpio_bits(BTTV_ALT_DCLK,0);
return 0;
}
static int __devinit pvr_boot(struct bttv *btv)
{
[PATCH] v4l: 800: whitespace cleanups - Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
const struct firmware *fw_entry;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int rc;
rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev);
if (rc != 0) {
printk(KERN_WARNING "bttv%d: no altera firmware [via hotplug]\n",
btv->c.nr);
[PATCH] v4l: 800: whitespace cleanups - Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
return rc;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
printk(KERN_INFO "bttv%d: altera firmware upload %s\n",
btv->c.nr, (rc < 0) ? "failed" : "ok");
[PATCH] v4l: 800: whitespace cleanups - Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
release_firmware(fw_entry);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
return rc;
}
/* ----------------------------------------------------------------------- */
/* some osprey specific stuff */
V4L/DVB (5899): bttv: Fix Viewcast Osprey 440 support Various gpio and mux settings for the Osprey 440 weren't correct. Fix them and provide some documentation about how the gpios work. The osprey eeprom routine wasn't run for the 440, add it. It was also crap, re-written to be better. Add the Osprey 440 to the Bt878 ALSA driver's whitelist. Currently the sample rate is fixed at 32kHz, as the driver doesn't support different rates for digital input mode, though the card can select the rate from 32, 44.1, or 48 kHz via gpio. Setting the audio gain via ALSA isn't supported yet; a userspace tool that programs the X9221 via i2c-dev must be used. The Bt878 digital audio format isn't programmed correctly for the CS5331A ADC used, resulting in extremely garbled sound. That is fixed in a followup patch. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-22 08:26:40 +08:00
static void __devinit osprey_eeprom(struct bttv *btv, const u8 ee[256])
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
V4L/DVB (5899): bttv: Fix Viewcast Osprey 440 support Various gpio and mux settings for the Osprey 440 weren't correct. Fix them and provide some documentation about how the gpios work. The osprey eeprom routine wasn't run for the 440, add it. It was also crap, re-written to be better. Add the Osprey 440 to the Bt878 ALSA driver's whitelist. Currently the sample rate is fixed at 32kHz, as the driver doesn't support different rates for digital input mode, though the card can select the rate from 32, 44.1, or 48 kHz via gpio. Setting the audio gain via ALSA isn't supported yet; a userspace tool that programs the X9221 via i2c-dev must be used. The Bt878 digital audio format isn't programmed correctly for the CS5331A ADC used, resulting in extremely garbled sound. That is fixed in a followup patch. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-22 08:26:40 +08:00
int i;
u32 serial = 0;
int cardid = -1;
/* This code will nevery actually get called in this case.... */
if (btv->c.type == BTTV_BOARD_UNKNOWN) {
/* this might be an antique... check for MMAC label in eeprom */
if (!strncmp(ee, "MMAC", 4)) {
u8 checksum = 0;
for (i = 0; i < 21; i++)
checksum += ee[i];
if (checksum != ee[21])
return;
cardid = BTTV_BOARD_OSPREY1x0_848;
for (i = 12; i < 21; i++)
serial *= 10, serial += ee[i] - '0';
}
V4L/DVB (6125): whitespace cleanup: replace leading spaces with tabs There were many instances of 7-space indents spread throughout the v4l-dvb tree. This patch replaces the 7-space indents with tabs. The whitespace cleaner script doesn't catch these, because it assumes that all indents are 8-space. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-28 05:16:54 +08:00
} else {
V4L/DVB (5899): bttv: Fix Viewcast Osprey 440 support Various gpio and mux settings for the Osprey 440 weren't correct. Fix them and provide some documentation about how the gpios work. The osprey eeprom routine wasn't run for the 440, add it. It was also crap, re-written to be better. Add the Osprey 440 to the Bt878 ALSA driver's whitelist. Currently the sample rate is fixed at 32kHz, as the driver doesn't support different rates for digital input mode, though the card can select the rate from 32, 44.1, or 48 kHz via gpio. Setting the audio gain via ALSA isn't supported yet; a userspace tool that programs the X9221 via i2c-dev must be used. The Bt878 digital audio format isn't programmed correctly for the CS5331A ADC used, resulting in extremely garbled sound. That is fixed in a followup patch. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-22 08:26:40 +08:00
unsigned short type;
for (i = 4*16; i < 8*16; i += 16) {
u16 checksum = ip_compute_csum(ee + i, 16);
if ((checksum&0xff) + (checksum>>8) == 0xff)
break;
}
if (i >= 8*16)
return;
ee += i;
/* found a valid descriptor */
V4L/DVB (7967): bt8xx: unaligned access Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-21 11:32:21 +08:00
type = get_unaligned_be16((__be16 *)(ee+4));
V4L/DVB (5899): bttv: Fix Viewcast Osprey 440 support Various gpio and mux settings for the Osprey 440 weren't correct. Fix them and provide some documentation about how the gpios work. The osprey eeprom routine wasn't run for the 440, add it. It was also crap, re-written to be better. Add the Osprey 440 to the Bt878 ALSA driver's whitelist. Currently the sample rate is fixed at 32kHz, as the driver doesn't support different rates for digital input mode, though the card can select the rate from 32, 44.1, or 48 kHz via gpio. Setting the audio gain via ALSA isn't supported yet; a userspace tool that programs the X9221 via i2c-dev must be used. The Bt878 digital audio format isn't programmed correctly for the CS5331A ADC used, resulting in extremely garbled sound. That is fixed in a followup patch. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-22 08:26:40 +08:00
switch(type) {
/* 848 based */
case 0x0004:
cardid = BTTV_BOARD_OSPREY1x0_848;
break;
case 0x0005:
cardid = BTTV_BOARD_OSPREY101_848;
break;
/* 878 based */
case 0x0012:
case 0x0013:
cardid = BTTV_BOARD_OSPREY1x0;
break;
case 0x0014:
case 0x0015:
cardid = BTTV_BOARD_OSPREY1x1;
break;
case 0x0016:
case 0x0017:
case 0x0020:
cardid = BTTV_BOARD_OSPREY1x1_SVID;
break;
case 0x0018:
case 0x0019:
case 0x001E:
case 0x001F:
cardid = BTTV_BOARD_OSPREY2xx;
break;
case 0x001A:
case 0x001B:
cardid = BTTV_BOARD_OSPREY2x0_SVID;
break;
case 0x0040:
cardid = BTTV_BOARD_OSPREY500;
break;
case 0x0050:
case 0x0056:
cardid = BTTV_BOARD_OSPREY540;
/* bttv_osprey_540_init(btv); */
break;
case 0x0060:
case 0x0070:
case 0x00A0:
cardid = BTTV_BOARD_OSPREY2x0;
/* enable output on select control lines */
gpio_inout(0xffffff,0x000303);
break;
case 0x00D8:
cardid = BTTV_BOARD_OSPREY440;
break;
default:
/* unknown...leave generic, but get serial # */
printk(KERN_INFO "bttv%d: "
"osprey eeprom: unknown card type 0x%04x\n",
btv->c.nr, type);
break;
}
V4L/DVB (7967): bt8xx: unaligned access Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-05-21 11:32:21 +08:00
serial = get_unaligned_be32((__be32 *)(ee+6));
V4L/DVB (5899): bttv: Fix Viewcast Osprey 440 support Various gpio and mux settings for the Osprey 440 weren't correct. Fix them and provide some documentation about how the gpios work. The osprey eeprom routine wasn't run for the 440, add it. It was also crap, re-written to be better. Add the Osprey 440 to the Bt878 ALSA driver's whitelist. Currently the sample rate is fixed at 32kHz, as the driver doesn't support different rates for digital input mode, though the card can select the rate from 32, 44.1, or 48 kHz via gpio. Setting the audio gain via ALSA isn't supported yet; a userspace tool that programs the X9221 via i2c-dev must be used. The Bt878 digital audio format isn't programmed correctly for the CS5331A ADC used, resulting in extremely garbled sound. That is fixed in a followup patch. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-22 08:26:40 +08:00
}
printk(KERN_INFO "bttv%d: osprey eeprom: card=%d '%s' serial=%u\n",
btv->c.nr, cardid,
cardid>0 ? bttv_tvcards[cardid].name : "Unknown", serial);
if (cardid<0 || btv->c.type == cardid)
return;
/* card type isn't set correctly */
if (card[btv->c.nr] < bttv_num_tvcards) {
printk(KERN_WARNING "bttv%d: osprey eeprom: "
"Not overriding user specified card type\n", btv->c.nr);
} else {
printk(KERN_INFO "bttv%d: osprey eeprom: "
"Changing card type from %d to %d\n", btv->c.nr,
btv->c.type, cardid);
btv->c.type = cardid;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
/* ----------------------------------------------------------------------- */
/* AVermedia specific stuff, from bktr_card.c */
static int tuner_0_table[] = {
[PATCH] v4l: 800: whitespace cleanups - Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL /* PAL-BG*/,
TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL /* PAL-I*/,
TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL,
TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
TUNER_PHILIPS_FM1216ME_MK3 };
static int tuner_1_table[] = {
[PATCH] v4l: 800: whitespace cleanups - Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
[PATCH] v4l: 800: whitespace cleanups - Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */
TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static void __devinit avermedia_eeprom(struct bttv *btv)
{
V4L/DVB (8757): v4l-dvb: fix a bunch of sparse warnings Fixed a lot of sparse warnings: mostly warnings about shadowed variables and signed/unsigned mismatches. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-04 04:11:54 +08:00
int tuner_make, tuner_tv_fm, tuner_format, tuner_type = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
tuner_make = (eeprom_data[0x41] & 0x7);
[PATCH] v4l: 800: whitespace cleanups - Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3;
tuner_format = (eeprom_data[0x42] & 0xf0) >> 4;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
btv->has_remote = (eeprom_data[0x42] & 0x01);
if (tuner_make == 0 || tuner_make == 2)
V4L/DVB (8757): v4l-dvb: fix a bunch of sparse warnings Fixed a lot of sparse warnings: mostly warnings about shadowed variables and signed/unsigned mismatches. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-04 04:11:54 +08:00
if (tuner_format <= 0x0a)
tuner_type = tuner_0_table[tuner_format];
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (tuner_make == 1)
V4L/DVB (8757): v4l-dvb: fix a bunch of sparse warnings Fixed a lot of sparse warnings: mostly warnings about shadowed variables and signed/unsigned mismatches. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-04 04:11:54 +08:00
if (tuner_format <= 9)
tuner_type = tuner_1_table[tuner_format];
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (tuner_make == 4)
V4L/DVB (8757): v4l-dvb: fix a bunch of sparse warnings Fixed a lot of sparse warnings: mostly warnings about shadowed variables and signed/unsigned mismatches. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-04 04:11:54 +08:00
if (tuner_format == 0x09)
tuner_type = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
V4L/DVB (8757): v4l-dvb: fix a bunch of sparse warnings Fixed a lot of sparse warnings: mostly warnings about shadowed variables and signed/unsigned mismatches. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-04 04:11:54 +08:00
btv->c.nr, eeprom_data[0x41], eeprom_data[0x42]);
if (tuner_type) {
btv->tuner_type = tuner_type;
printk(KERN_CONT "%d", tuner_type);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} else
V4L/DVB (8757): v4l-dvb: fix a bunch of sparse warnings Fixed a lot of sparse warnings: mostly warnings about shadowed variables and signed/unsigned mismatches. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-04 04:11:54 +08:00
printk(KERN_CONT "Unknown type");
printk(KERN_CONT " radio:%s remote control:%s\n",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
tuner_tv_fm ? "yes" : "no",
btv->has_remote ? "yes" : "no");
}
V4L/DVB (10559): bttv: Fix TDA9880 norm setting code The code to set the norm for the TDA9880 analog demod was comparing btv->norm, an index into the bttv driver's norm array, to V4L2_STD_NTSC, which is a bit flag that's part of the V4L2 API. This doesn't work of course and results in the PAL path always being taken. What's more, it modified the bttv_tvcards[] entries for cards using the TDA9880. This is wrong because changing the norm on one card will also affect other cards of the same type. Writing to bttv_tvcards is also bad because it should be read-only or even devinitdata. Changing the norm would also cause the audio to become unmuted. Have the code get called for both norm setting and audio input setting (which where the gpios are set) to avoid needed to modify bttv_tvcards. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/*
* For Voodoo TV/FM and Voodoo 200. These cards' tuners use a TDA9880
* analog demod, which is not I2C controlled like the newer and more common
* TDA9887 series. Instead is has two tri-state input pins, S0 and S1,
* that control the IF for the video and audio. Apparently, bttv GPIO
* 0x10000 is connected to S0. S0 low selects a 38.9 MHz VIF for B/G/D/K/I
* (i.e., PAL) while high selects 45.75 MHz for M/N (i.e., NTSC).
*/
u32 bttv_tda9880_setnorm(struct bttv *btv, u32 gpiobits)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
V4L/DVB (10559): bttv: Fix TDA9880 norm setting code The code to set the norm for the TDA9880 analog demod was comparing btv->norm, an index into the bttv driver's norm array, to V4L2_STD_NTSC, which is a bit flag that's part of the V4L2 API. This doesn't work of course and results in the PAL path always being taken. What's more, it modified the bttv_tvcards[] entries for cards using the TDA9880. This is wrong because changing the norm on one card will also affect other cards of the same type. Writing to bttv_tvcards is also bad because it should be read-only or even devinitdata. Changing the norm would also cause the audio to become unmuted. Have the code get called for both norm setting and audio input setting (which where the gpios are set) to avoid needed to modify bttv_tvcards. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
if (btv->audio == TVAUDIO_INPUT_TUNER) {
if (bttv_tvnorms[btv->tvnorm].v4l2_id & V4L2_STD_MN)
gpiobits |= 0x10000;
else
gpiobits &= ~0x10000;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
V4L/DVB (10559): bttv: Fix TDA9880 norm setting code The code to set the norm for the TDA9880 analog demod was comparing btv->norm, an index into the bttv driver's norm array, to V4L2_STD_NTSC, which is a bit flag that's part of the V4L2 API. This doesn't work of course and results in the PAL path always being taken. What's more, it modified the bttv_tvcards[] entries for cards using the TDA9880. This is wrong because changing the norm on one card will also affect other cards of the same type. Writing to bttv_tvcards is also bad because it should be read-only or even devinitdata. Changing the norm would also cause the audio to become unmuted. Have the code get called for both norm setting and audio input setting (which where the gpios are set) to avoid needed to modify bttv_tvcards. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpiobits);
return gpiobits;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
/*
* reset/enable the MSP on some Hauppauge cards
[PATCH] v4l: 687: fix source charset make symbols utf 8 - Fix source charset. Make symbols UTF-8. Signed-off-by: David Woodhouse <dwmw2@infradead.org>. Signed-off-by: Nickolay V. Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:46 +08:00
* Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*
* Hauppauge: pin 5
* Voodoo: pin 20
*/
static void __devinit boot_msp34xx(struct bttv *btv, int pin)
{
int mask = (1 << pin);
gpio_inout(mask,mask);
gpio_bits(mask,0);
V4L/DVB (8877): b2c2 and bt8xx: udelay to mdelay b2c2-flexcop, dvb/bt8xx and video/bt8xx fails to build on ARM with: __bad_udelay is specifically designed on ARM to fail when udelay is called in a bad way. arch/arm/include/asm/delay.h has this to say about __bad_udelay: /* * This function intentionally does not exist; if you see references to * it, it means that you're calling udelay() with an out of range value. * * With currently imposed limits, this means that we support a max delay * of 2000us. Further limits: HZ<=1000 and bogomips<=3355 */ extern void __bad_udelay(void); Solution is to replace udelay by a mdelay and udelay with value less than 2000 Signed-off-by: Thierry MERLE <thierry.merle@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-09-02 04:32:10 +08:00
mdelay(2);
udelay(500);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
gpio_bits(mask,mask);
if (bttv_gpio)
bttv_gpio_tracking(btv,"msp34xx");
if (bttv_verbose)
printk(KERN_INFO "bttv%d: Hauppauge/Voodoo msp34xx: reset line "
"init [%d]\n", btv->c.nr, pin);
}
/* ----------------------------------------------------------------------- */
/* Imagenation L-Model PXC200 Framegrabber */
/* This is basically the same procedure as
* used by Alessandro Rubini in his pxc200
* driver, but using BTTV functions */
static void __devinit init_PXC200(struct bttv *btv)
{
static int vals[] __devinitdata = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d,
0x01, 0x02, 0x03, 0x04, 0x05, 0x06,
0x00 };
unsigned int i;
int tmp;
u32 val;
/* Initialise GPIO-connevted stuff */
gpio_inout(0xffffff, (1<<13));
gpio_write(0);
udelay(3);
gpio_write(1<<13);
/* GPIO inputs are pulled up, so no need to drive
* reset pin any longer */
gpio_bits(0xffffff, 0);
if (bttv_gpio)
bttv_gpio_tracking(btv,"pxc200");
/* we could/should try and reset/control the AD pots? but
right now we simply turned off the crushing. Without
this the AGC drifts drifts
remember the EN is reverse logic -->
setting BT848_ADC_AGC_EN disable the AGC
tboult@eecs.lehigh.edu
*/
btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);
/* Initialise MAX517 DAC */
printk(KERN_INFO "Setting DAC reference voltage level ...\n");
bttv_I2CWrite(btv,0x5E,0,0x80,1);
/* Initialise 12C508 PIC */
/* The I2CWrite and I2CRead commmands are actually to the
* same chips - but the R/W bit is included in the address
* argument so the numbers are different */
printk(KERN_INFO "Initialising 12C508 PIC chip ...\n");
/* First of all, enable the clock line. This is used in the PXC200-F */
val = btread(BT848_GPIO_DMA_CTL);
val |= BT848_GPIO_DMA_CTL_GPCLKMODE;
btwrite(val, BT848_GPIO_DMA_CTL);
/* Then, push to 0 the reset pin long enough to reset the *
* device same as above for the reset line, but not the same
* value sent to the GPIO-connected stuff
* which one is the good one? */
gpio_inout(0xffffff,(1<<2));
gpio_write(0);
udelay(10);
gpio_write(1<<2);
[PATCH] v4l: 800: whitespace cleanups - Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
for (i = 0; i < ARRAY_SIZE(vals); i++) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
if (tmp != -1) {
printk(KERN_INFO
"I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
}
}
printk(KERN_INFO "PXC200 Initialised.\n");
}
[PATCH] bttv update This patch synchronizes current bttv support on V4L with linux kernel and adds support to Adlink RTV24 card. It is asked that *every* patch to V4L stuff to be first submitted to video4linux-list@redhat.com. From: "J.A. Magallon" <jamagallon@able.es> struct bttv defined after usage. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Peter Skipworth <pskipworth@clarityvi.com> Signed-off-by: Nickolay V Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 13:04:58 +08:00
[PATCH] BTTV support for Adlink RTV24 capture card The bttv module currently lacks support for the Adlink RTV24 capture card. The following patch adds support for the Adlink RTV24 video capture card to the bttv module. Cc: Gerd Knorr <kraxel@bytesex.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 13:04:45 +08:00
/* ----------------------------------------------------------------------- */
/*
* The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
* it. This apparently involves the following procedure for each 878 chip:
*
* 1) write 0x00C3FEFF to the GPIO_OUT_EN register
*
* 2) write to GPIO_DATA
* - 0x0E
* - sleep 1ms
* - 0x10 + 0x0E
* - sleep 10ms
* - 0x0E
* read from GPIO_DATA into buf (uint_32)
* - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 )
* error. ERROR_CPLD_Check_Failed stop.
*
* 3) write to GPIO_DATA
* - write 0x4400 + 0x0E
* - sleep 10ms
* - write 0x4410 + 0x0E
* - sleep 1ms
* - write 0x0E
* read from GPIO_DATA into buf (uint_32)
V4L/DVB (4817): Fix uses of "&&" where "&" was intended Fix uses of "&&" where "&" was intended in bttv-cards.c and tveeprom.c Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-11-10 04:25:28 +08:00
* - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 )
[PATCH] BTTV support for Adlink RTV24 capture card The bttv module currently lacks support for the Adlink RTV24 capture card. The following patch adds support for the Adlink RTV24 video capture card to the bttv module. Cc: Gerd Knorr <kraxel@bytesex.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 13:04:45 +08:00
* error. ERROR_CPLD_Check_Failed.
*/
/* ----------------------------------------------------------------------- */
[PATCH] V4L: Makes needlessly global code static This patch makes needlessly global code static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-01 16:51:35 +08:00
static void
[PATCH] bttv update This patch synchronizes current bttv support on V4L with linux kernel and adds support to Adlink RTV24 card. It is asked that *every* patch to V4L stuff to be first submitted to video4linux-list@redhat.com. From: "J.A. Magallon" <jamagallon@able.es> struct bttv defined after usage. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Peter Skipworth <pskipworth@clarityvi.com> Signed-off-by: Nickolay V Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 13:04:58 +08:00
init_RTV24 (struct bttv *btv)
[PATCH] BTTV support for Adlink RTV24 capture card The bttv module currently lacks support for the Adlink RTV24 capture card. The following patch adds support for the Adlink RTV24 video capture card to the bttv module. Cc: Gerd Knorr <kraxel@bytesex.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 13:04:45 +08:00
{
[PATCH] bttv update This patch synchronizes current bttv support on V4L with linux kernel and adds support to Adlink RTV24 card. It is asked that *every* patch to V4L stuff to be first submitted to video4linux-list@redhat.com. From: "J.A. Magallon" <jamagallon@able.es> struct bttv defined after usage. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Peter Skipworth <pskipworth@clarityvi.com> Signed-off-by: Nickolay V Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 13:04:58 +08:00
uint32_t dataRead = 0;
long watchdog_value = 0x0E;
[PATCH] BTTV support for Adlink RTV24 capture card The bttv module currently lacks support for the Adlink RTV24 capture card. The following patch adds support for the Adlink RTV24 video capture card to the bttv module. Cc: Gerd Knorr <kraxel@bytesex.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 13:04:45 +08:00
[PATCH] bttv update This patch synchronizes current bttv support on V4L with linux kernel and adds support to Adlink RTV24 card. It is asked that *every* patch to V4L stuff to be first submitted to video4linux-list@redhat.com. From: "J.A. Magallon" <jamagallon@able.es> struct bttv defined after usage. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Peter Skipworth <pskipworth@clarityvi.com> Signed-off-by: Nickolay V Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 13:04:58 +08:00
printk (KERN_INFO
"bttv%d: Adlink RTV-24 initialisation in progress ...\n",
[PATCH] BTTV support for Adlink RTV24 capture card The bttv module currently lacks support for the Adlink RTV24 capture card. The following patch adds support for the Adlink RTV24 video capture card to the bttv module. Cc: Gerd Knorr <kraxel@bytesex.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 13:04:45 +08:00
btv->c.nr);
[PATCH] bttv update This patch synchronizes current bttv support on V4L with linux kernel and adds support to Adlink RTV24 card. It is asked that *every* patch to V4L stuff to be first submitted to video4linux-list@redhat.com. From: "J.A. Magallon" <jamagallon@able.es> struct bttv defined after usage. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Peter Skipworth <pskipworth@clarityvi.com> Signed-off-by: Nickolay V Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 13:04:58 +08:00
btwrite (0x00c3feff, BT848_GPIO_OUT_EN);
[PATCH] BTTV support for Adlink RTV24 capture card The bttv module currently lacks support for the Adlink RTV24 capture card. The following patch adds support for the Adlink RTV24 video capture card to the bttv module. Cc: Gerd Knorr <kraxel@bytesex.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 13:04:45 +08:00
[PATCH] bttv update This patch synchronizes current bttv support on V4L with linux kernel and adds support to Adlink RTV24 card. It is asked that *every* patch to V4L stuff to be first submitted to video4linux-list@redhat.com. From: "J.A. Magallon" <jamagallon@able.es> struct bttv defined after usage. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Peter Skipworth <pskipworth@clarityvi.com> Signed-off-by: Nickolay V Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 13:04:58 +08:00
btwrite (0 + watchdog_value, BT848_GPIO_DATA);
msleep (1);
btwrite (0x10 + watchdog_value, BT848_GPIO_DATA);
msleep (10);
btwrite (0 + watchdog_value, BT848_GPIO_DATA);
[PATCH] BTTV support for Adlink RTV24 capture card The bttv module currently lacks support for the Adlink RTV24 capture card. The following patch adds support for the Adlink RTV24 video capture card to the bttv module. Cc: Gerd Knorr <kraxel@bytesex.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 13:04:45 +08:00
[PATCH] bttv update This patch synchronizes current bttv support on V4L with linux kernel and adds support to Adlink RTV24 card. It is asked that *every* patch to V4L stuff to be first submitted to video4linux-list@redhat.com. From: "J.A. Magallon" <jamagallon@able.es> struct bttv defined after usage. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Peter Skipworth <pskipworth@clarityvi.com> Signed-off-by: Nickolay V Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 13:04:58 +08:00
dataRead = btread (BT848_GPIO_DATA);
[PATCH] BTTV support for Adlink RTV24 capture card The bttv module currently lacks support for the Adlink RTV24 capture card. The following patch adds support for the Adlink RTV24 video capture card to the bttv module. Cc: Gerd Knorr <kraxel@bytesex.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 13:04:45 +08:00
[PATCH] bttv update This patch synchronizes current bttv support on V4L with linux kernel and adds support to Adlink RTV24 card. It is asked that *every* patch to V4L stuff to be first submitted to video4linux-list@redhat.com. From: "J.A. Magallon" <jamagallon@able.es> struct bttv defined after usage. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Peter Skipworth <pskipworth@clarityvi.com> Signed-off-by: Nickolay V Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 13:04:58 +08:00
if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) {
printk (KERN_INFO
"bttv%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
btv->c.nr, dataRead);
[PATCH] BTTV support for Adlink RTV24 capture card The bttv module currently lacks support for the Adlink RTV24 capture card. The following patch adds support for the Adlink RTV24 video capture card to the bttv module. Cc: Gerd Knorr <kraxel@bytesex.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 13:04:45 +08:00
}
[PATCH] bttv update This patch synchronizes current bttv support on V4L with linux kernel and adds support to Adlink RTV24 card. It is asked that *every* patch to V4L stuff to be first submitted to video4linux-list@redhat.com. From: "J.A. Magallon" <jamagallon@able.es> struct bttv defined after usage. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Peter Skipworth <pskipworth@clarityvi.com> Signed-off-by: Nickolay V Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 13:04:58 +08:00
btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA);
msleep (10);
btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA);
msleep (1);
btwrite (watchdog_value, BT848_GPIO_DATA);
msleep (1);
dataRead = btread (BT848_GPIO_DATA);
if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) {
printk (KERN_INFO
"bttv%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
btv->c.nr, dataRead);
[PATCH] BTTV support for Adlink RTV24 capture card The bttv module currently lacks support for the Adlink RTV24 capture card. The following patch adds support for the Adlink RTV24 video capture card to the bttv module. Cc: Gerd Knorr <kraxel@bytesex.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 13:04:45 +08:00
return;
}
[PATCH] bttv update This patch synchronizes current bttv support on V4L with linux kernel and adds support to Adlink RTV24 card. It is asked that *every* patch to V4L stuff to be first submitted to video4linux-list@redhat.com. From: "J.A. Magallon" <jamagallon@able.es> struct bttv defined after usage. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Peter Skipworth <pskipworth@clarityvi.com> Signed-off-by: Nickolay V Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 13:04:58 +08:00
printk (KERN_INFO
"bttv%d: Adlink RTV-24 initialisation complete.\n", btv->c.nr);
[PATCH] BTTV support for Adlink RTV24 capture card The bttv module currently lacks support for the Adlink RTV24 capture card. The following patch adds support for the Adlink RTV24 video capture card to the bttv module. Cc: Gerd Knorr <kraxel@bytesex.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 13:04:45 +08:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] bttv update This patch synchronizes current bttv support on V4L with linux kernel and adds support to Adlink RTV24 card. It is asked that *every* patch to V4L stuff to be first submitted to video4linux-list@redhat.com. From: "J.A. Magallon" <jamagallon@able.es> struct bttv defined after usage. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Peter Skipworth <pskipworth@clarityvi.com> Signed-off-by: Nickolay V Shmyrev <nshmyrev@yandex.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24 13:04:58 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* ----------------------------------------------------------------------- */
/* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports */
/*
* Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu>
* This code is placed under the terms of the GNU General Public License
*
* Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00
*/
static void bus_low(struct bttv *btv, int bit)
{
if (btv->mbox_ior) {
gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
udelay(5);
}
gpio_bits(bit,0);
udelay(5);
if (btv->mbox_ior) {
gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
udelay(5);
}
}
static void bus_high(struct bttv *btv, int bit)
{
if (btv->mbox_ior) {
gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
udelay(5);
}
gpio_bits(bit,bit);
udelay(5);
if (btv->mbox_ior) {
gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
udelay(5);
}
}
static int bus_in(struct bttv *btv, int bit)
{
if (btv->mbox_ior) {
gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
udelay(5);
gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
udelay(5);
}
return gpio_read() & (bit);
}
/* TEA5757 register bits */
#define TEA_FREQ 0:14
#define TEA_BUFFER 15:15
#define TEA_SIGNAL_STRENGTH 16:17
#define TEA_PORT1 18:18
#define TEA_PORT0 19:19
#define TEA_BAND 20:21
#define TEA_BAND_FM 0
#define TEA_BAND_MW 1
#define TEA_BAND_LW 2
#define TEA_BAND_SW 3
#define TEA_MONO 22:22
#define TEA_ALLOW_STEREO 0
#define TEA_FORCE_MONO 1
#define TEA_SEARCH_DIRECTION 23:23
#define TEA_SEARCH_DOWN 0
#define TEA_SEARCH_UP 1
#define TEA_STATUS 24:24
#define TEA_STATUS_TUNED 0
#define TEA_STATUS_SEARCHING 1
/* Low-level stuff */
static int tea5757_read(struct bttv *btv)
{
unsigned long timeout;
int value = 0;
int i;
/* better safe than sorry */
gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we);
if (btv->mbox_ior) {
gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
udelay(5);
}
if (bttv_gpio)
bttv_gpio_tracking(btv,"tea5757 read");
bus_low(btv,btv->mbox_we);
bus_low(btv,btv->mbox_clk);
udelay(10);
V4L/DVB (5861): Use msecs_to_jiffies instead of HZ on bttv, cx88 and saa7134 Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-07-18 03:36:20 +08:00
timeout= jiffies + msecs_to_jiffies(1000);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] v4l: BTTV updates and card additions - Remove $Id CVS logs for V4L files - Added DVICO FusionHDTV 5 Lite card. - Added Acorp Y878F. - CodingStyle fixes. - Added tuner_addr to bttv cards structure. - linux/version.h replaced by linux/utsname.h on bttvp.h - kernel module for acquiring RDS data from a SAA6588. - Allow multiple open() and reading calls to /dev/radio on bttv-driver.c - added i2c address for lgdt330x. Signed-off-by: Hans J. Koch <koch@hjk-az.de> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:39 +08:00
/* wait for DATA line to go low; error if it doesn't */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout))
schedule();
if (bus_in(btv,btv->mbox_data)) {
printk(KERN_WARNING "bttv%d: tea5757: read timeout\n",btv->c.nr);
return -1;
}
dprintk("bttv%d: tea5757:",btv->c.nr);
V4L/DVB (5477): CodingStyle cleanups on for loops at bttv-cards.c Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-03-29 09:37:23 +08:00
for (i = 0; i < 24; i++) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
udelay(5);
bus_high(btv,btv->mbox_clk);
udelay(5);
dprintk("%c",(bus_in(btv,btv->mbox_most) == 0)?'T':'-');
bus_low(btv,btv->mbox_clk);
value <<= 1;
value |= (bus_in(btv,btv->mbox_data) == 0)?0:1; /* MSB first */
dprintk("%c", (bus_in(btv,btv->mbox_most) == 0)?'S':'M');
}
dprintk("\nbttv%d: tea5757: read 0x%X\n", btv->c.nr, value);
return value;
}
static int tea5757_write(struct bttv *btv, int value)
{
int i;
int reg = value;
gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we | btv->mbox_data);
if (btv->mbox_ior) {
gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
udelay(5);
}
if (bttv_gpio)
bttv_gpio_tracking(btv,"tea5757 write");
dprintk("bttv%d: tea5757: write 0x%X\n", btv->c.nr, value);
bus_low(btv,btv->mbox_clk);
bus_high(btv,btv->mbox_we);
V4L/DVB (5477): CodingStyle cleanups on for loops at bttv-cards.c Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-03-29 09:37:23 +08:00
for (i = 0; i < 25; i++) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (reg & 0x1000000)
bus_high(btv,btv->mbox_data);
else
bus_low(btv,btv->mbox_data);
reg <<= 1;
bus_high(btv,btv->mbox_clk);
udelay(10);
bus_low(btv,btv->mbox_clk);
udelay(10);
}
bus_low(btv,btv->mbox_we); /* unmute !!! */
return 0;
}
void tea5757_set_freq(struct bttv *btv, unsigned short freq)
{
dprintk("tea5757_set_freq %d\n",freq);
tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */
}
/* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
*
* This is needed because rv605 don't use a normal multiplex, but a crosspoint
* switch instead (CD22M3494E). This IC can have multiple active connections
* between Xn (input) and Yn (output) pins. We need to clear any existing
* connection prior to establish a new one, pulsing the STROBE pin.
*
* The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
* GPIO pins are wired as:
Fix misspellings of "system", "controller", "interrupt" and "necessary". Fix the various misspellings of "system", controller", "interrupt" and "[un]necessary". Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-20 05:10:43 +08:00
* GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller)
* GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller)
* GPIO[7] - DATA (xpoint) - P1[7] (microcontroller)
* GPIO[8] - - P3[5] (microcontroller)
* GPIO[9] - RESET (xpoint) - P3[6] (microcontroller)
* GPIO[10] - STROBE (xpoint) - P3[7] (microcontroller)
* GPINTR - - P3[4] (microcontroller)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
*
Fix misspellings of "system", "controller", "interrupt" and "necessary". Fix the various misspellings of "system", controller", "interrupt" and "[un]necessary". Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-20 05:10:43 +08:00
* The microcontroller is a 80C32 like. It should be possible to change xpoint
* configuration either directly (as we are doing) or using the microcontroller
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* which is also wired to I2C interface. I have no further info on the
Fix misspellings of "system", "controller", "interrupt" and "necessary". Fix the various misspellings of "system", controller", "interrupt" and "[un]necessary". Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-20 05:10:43 +08:00
* microcontroller features, one would need to disassembly the firmware.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* note: the vendor refused to give any information on this product, all
* that stuff was found using a multimeter! :)
*/
static void rv605_muxsel(struct bttv *btv, unsigned int input)
{
V4L/DVB (10565): bttv: fix external mux for RemoteVision MX Old versions of the bttv driver would use the high nibble of an input's muxsel value to program the GPIO lines enabled via gpiomask2. Apparently this was supposed to be for switching external audio muxes. Anyway, the code that did this was removed sometime in the pre-git 2.6 series. The RemoteVision MX board used this feature to control an external video mux and I guess no one noticed when they removed the code. Move the extra gpio mux data out of the high nibble of muxsel and to rv605_muxsel(), then have that function set the gpio lines with it. From looking at the CD22M3494E datasheet, it seems like the mdelay(1) is a much longer delay than necessary. It looks like only around 20 ns is necessary. Cc: Miguel Freitas <miguel@cetuc.puc-rio.br> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
static const u8 muxgpio[] = { 0x3, 0x1, 0x2, 0x4, 0xf, 0x7, 0xe, 0x0,
0xd, 0xb, 0xc, 0x6, 0x9, 0x5, 0x8, 0xa };
gpio_bits(0x07f, muxgpio[input]);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* reset all conections */
gpio_bits(0x200,0x200);
mdelay(1);
gpio_bits(0x200,0x000);
mdelay(1);
drivers/media/: Spelling fixes Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-02-03 23:18:59 +08:00
/* create a new connection */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
gpio_bits(0x480,0x480);
mdelay(1);
gpio_bits(0x480,0x080);
mdelay(1);
}
/* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
*
* The CS16 (available on eBay cheap) is a PCI board with four Fusion
* 878A chips, a PCI bridge, an Atmel microcontroller, four sync seperator
* chips, ten eight input analog multiplexors, a not chip and a few
* other components.
*
* 16 inputs on a secondary bracket are provided and can be selected
* from each of the four capture chips. Two of the eight input
* multiplexors are used to select from any of the 16 input signals.
*
* Unsupported hardware capabilities:
* . A video output monitor on the secondary bracket can be selected from
* one of the 878A chips.
* . Another passthrough but I haven't spent any time investigating it.
* . Digital I/O (logic level connected to GPIO) is available from an
* onboard header.
*
* The on chip input mux should always be set to 2.
* GPIO[16:19] - Video input selection
* GPIO[0:3] - Video output monitor select (only available from one 878A)
* GPIO[?:?] - Digital I/O.
*
* There is an ATMEL microcontroller with an 8031 core on board. I have not
* determined what function (if any) it provides. With the microcontroller
* and sync seperator chips a guess is that it might have to do with video
* switching and maybe some digital I/O.
*/
static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
{
/* video mux */
gpio_bits(0x0f0000, input << 16);
}
static void tibetCS16_init(struct bttv *btv)
{
/* enable gpio bits, mask obtained via btSpy */
gpio_inout(0xffffff, 0x0f7fff);
gpio_write(0x0f7fff);
}
/*
* The following routines for the Kodicom-4400r get a little mind-twisting.
* There is a "master" controller and three "slave" controllers, together
* an analog switch which connects any of 16 cameras to any of the BT87A's.
* The analog switch is controlled by the "master", but the detection order
* of the four BT878A chips is in an order which I just don't understand.
* The "master" is actually the second controller to be detected. The
Fix misspellings of "system", "controller", "interrupt" and "necessary". Fix the various misspellings of "system", controller", "interrupt" and "[un]necessary". Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-20 05:10:43 +08:00
* logic on the board uses logical numbers for the 4 controllers, but
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* those numbers are different from the detection sequence. When working
* with the analog switch, we need to "map" from the detection sequence
* over to the board's logical controller number. This mapping sequence
* is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
* unit 3, the second (which is the master) is logical unit 0, etc.
* We need to maintain the status of the analog switch (which of the 16
* cameras is connected to which of the 4 controllers). Rather than
* add to the bttv structure for this, we use the data reserved for
* the mbox (unused for this card type).
*/
/*
* First a routine to set the analog switch, which controls which camera
* is routed to which controller. The switch comprises an X-address
* (gpio bits 0-3, representing the camera, ranging from 0-15), and a
* Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
* A data value (gpio bit 7) of '1' enables the switch, and '0' disables
* the switch. A STROBE bit (gpio bit 8) latches the data value into the
* specified address. The idea is to set the address and data, then bring
* STROBE high, and finally bring STROBE back to low.
*/
static void kodicom4400r_write(struct bttv *btv,
unsigned char xaddr,
unsigned char yaddr,
unsigned char data) {
unsigned int udata;
udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf);
gpio_bits(0x1ff, udata); /* write ADDR and DAT */
gpio_bits(0x1ff, udata | (1 << 8)); /* strobe high */
gpio_bits(0x1ff, udata); /* strobe low */
}
/*
* Next the mux select. Both the "master" and "slave" 'cards' (controllers)
* use this routine. The routine finds the "master" for the card, maps
* the controller number from the detected position over to the logical
* number, writes the appropriate data to the analog switch, and housekeeps
* the local copy of the switch information. The parameter 'input' is the
* requested camera number (0 - 15).
*/
static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input)
{
char *sw_status;
int xaddr, yaddr;
struct bttv *mctlr;
static unsigned char map[4] = {3, 0, 2, 1};
mctlr = master[btv->c.nr];
if (mctlr == NULL) { /* ignore if master not yet detected */
return;
}
yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */
yaddr = map[yaddr];
sw_status = (char *)(&mctlr->mbox_we);
xaddr = input & 0xf;
/* Check if the controller/camera pair has changed, else ignore */
if (sw_status[yaddr] != xaddr)
{
/* "open" the old switch, "close" the new one, save the new */
kodicom4400r_write(mctlr, sw_status[yaddr], yaddr, 0);
sw_status[yaddr] = xaddr;
kodicom4400r_write(mctlr, xaddr, yaddr, 1);
}
}
/*
* During initialisation, we need to reset the analog switch. We
* also preset the switch to map the 4 connectors on the card to the
* *user's* (see above description of kodicom4400r_muxsel) channels
* 0 through 3
*/
static void kodicom4400r_init(struct bttv *btv)
{
char *sw_status = (char *)(&btv->mbox_we);
int ix;
gpio_inout(0x0003ff, 0x0003ff);
gpio_write(1 << 9); /* reset MUX */
gpio_write(0);
/* Preset camera 0 to the 4 controllers */
V4L/DVB (5477): CodingStyle cleanups on for loops at bttv-cards.c Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-03-29 09:37:23 +08:00
for (ix = 0; ix < 4; ix++) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
sw_status[ix] = ix;
kodicom4400r_write(btv, ix, ix, 1);
}
/*
* Since this is the "master", we need to set up the
* other three controller chips' pointers to this structure
* for later use in the muxsel routine.
*/
if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3))
return;
master[btv->c.nr-1] = btv;
master[btv->c.nr] = btv;
master[btv->c.nr+1] = btv;
master[btv->c.nr+2] = btv;
}
[PATCH] v4l: BTTV updates and card additions - Remove $Id CVS logs for V4L files - Added DVICO FusionHDTV 5 Lite card. - Added Acorp Y878F. - CodingStyle fixes. - Added tuner_addr to bttv cards structure. - linux/version.h replaced by linux/utsname.h on bttvp.h - kernel module for acquiring RDS data from a SAA6588. - Allow multiple open() and reading calls to /dev/radio on bttv-driver.c - added i2c address for lgdt330x. Signed-off-by: Hans J. Koch <koch@hjk-az.de> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:39 +08:00
/* The Grandtec X-Guard framegrabber card uses two Dual 4-channel
* video multiplexers to provide up to 16 video inputs. These
* multiplexers are controlled by the lower 8 GPIO pins of the
* bt878. The multiplexers probably Pericom PI5V331Q or similar.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] v4l: BTTV updates and card additions - Remove $Id CVS logs for V4L files - Added DVICO FusionHDTV 5 Lite card. - Added Acorp Y878F. - CodingStyle fixes. - Added tuner_addr to bttv cards structure. - linux/version.h replaced by linux/utsname.h on bttvp.h - kernel module for acquiring RDS data from a SAA6588. - Allow multiple open() and reading calls to /dev/radio on bttv-driver.c - added i2c address for lgdt330x. Signed-off-by: Hans J. Koch <koch@hjk-az.de> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:39 +08:00
* xxx0 is pin xxx of multiplexer U5,
* yyy1 is pin yyy of multiplexer U2
*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#define ENA0 0x01
#define ENB0 0x02
#define ENA1 0x04
#define ENB1 0x08
#define IN10 0x10
#define IN00 0x20
#define IN11 0x40
#define IN01 0x80
static void xguard_muxsel(struct bttv *btv, unsigned int input)
{
static const int masks[] = {
[PATCH] v4l: 800: whitespace cleanups - Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10,
ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10,
ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11,
ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
};
gpio_write(masks[input%16]);
}
static void picolo_tetra_init(struct bttv *btv)
{
/*This is the video input redirection fonctionality : I DID NOT USED IT. */
btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */
btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A] set to 1*/
}
static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
{
dprintk (KERN_DEBUG "bttv%d : picolo_tetra_muxsel => input = %d\n",btv->c.nr,input);
/*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
/*GPIO[20]&GPIO[21] used to choose the right input*/
btwrite (input<<20,BT848_GPIO_DATA);
}
/*
* ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
*
* The IVC120G security card has 4 i2c controlled TDA8540 matrix
* swichers to provide 16 channels to MUX0. The TDA8540's have
spelling fixes acquired (aquired) contiguous (contigious) successful (succesful, succesfull) surprise (suprise) whether (weather) some other misspellings Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-27 00:35:02 +08:00
* 4 independent outputs and as such the IVC120G also has the
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
* optional "Monitor Out" bus. This allows the card to be looking
* at one input while the monitor is looking at another.
*
* Since I've couldn't be bothered figuring out how to add an
* independant muxsel for the monitor bus, I've just set it to
* whatever the card is looking at.
*
* OUT0 of the TDA8540's is connected to MUX0 (0x03)
* OUT1 of the TDA8540's is connected to "Monitor Out" (0x0C)
*
* TDA8540_ALT3 IN0-3 = Channel 13 - 16 (0x03)
* TDA8540_ALT4 IN0-3 = Channel 1 - 4 (0x03)
* TDA8540_ALT5 IN0-3 = Channel 5 - 8 (0x03)
* TDA8540_ALT6 IN0-3 = Channel 9 - 12 (0x03)
*
*/
/* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
#define I2C_TDA8540 0x90
#define I2C_TDA8540_ALT1 0x92
#define I2C_TDA8540_ALT2 0x94
#define I2C_TDA8540_ALT3 0x96
#define I2C_TDA8540_ALT4 0x98
#define I2C_TDA8540_ALT5 0x9a
#define I2C_TDA8540_ALT6 0x9c
static void ivc120_muxsel(struct bttv *btv, unsigned int input)
{
[PATCH] v4l: BTTV updates and card additions - Remove $Id CVS logs for V4L files - Added DVICO FusionHDTV 5 Lite card. - Added Acorp Y878F. - CodingStyle fixes. - Added tuner_addr to bttv cards structure. - linux/version.h replaced by linux/utsname.h on bttvp.h - kernel module for acquiring RDS data from a SAA6588. - Allow multiple open() and reading calls to /dev/radio on bttv-driver.c - added i2c address for lgdt330x. Signed-off-by: Hans J. Koch <koch@hjk-az.de> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:39 +08:00
/* Simple maths */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
int key = input % 4;
int matrix = input / 4;
dprintk("bttv%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
btv->c.nr, input, matrix, key);
[PATCH] v4l: BTTV updates and card additions - Remove $Id CVS logs for V4L files - Added DVICO FusionHDTV 5 Lite card. - Added Acorp Y878F. - CodingStyle fixes. - Added tuner_addr to bttv cards structure. - linux/version.h replaced by linux/utsname.h on bttvp.h - kernel module for acquiring RDS data from a SAA6588. - Allow multiple open() and reading calls to /dev/radio on bttv-driver.c - added i2c address for lgdt330x. Signed-off-by: Hans J. Koch <koch@hjk-az.de> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:39 +08:00
/* Handles the input selection on the TDA8540's */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
((matrix == 3) ? (key | key << 2) : 0x00), 1);
bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
((matrix == 0) ? (key | key << 2) : 0x00), 1);
bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00,
((matrix == 1) ? (key | key << 2) : 0x00), 1);
bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
((matrix == 2) ? (key | key << 2) : 0x00), 1);
[PATCH] v4l: BTTV updates and card additions - Remove $Id CVS logs for V4L files - Added DVICO FusionHDTV 5 Lite card. - Added Acorp Y878F. - CodingStyle fixes. - Added tuner_addr to bttv cards structure. - linux/version.h replaced by linux/utsname.h on bttvp.h - kernel module for acquiring RDS data from a SAA6588. - Allow multiple open() and reading calls to /dev/radio on bttv-driver.c - added i2c address for lgdt330x. Signed-off-by: Hans J. Koch <koch@hjk-az.de> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:39 +08:00
/* Handles the output enables on the TDA8540's */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
[PATCH] v4l: BTTV updates and card additions - Remove $Id CVS logs for V4L files - Added DVICO FusionHDTV 5 Lite card. - Added Acorp Y878F. - CodingStyle fixes. - Added tuner_addr to bttv cards structure. - linux/version.h replaced by linux/utsname.h on bttvp.h - kernel module for acquiring RDS data from a SAA6588. - Allow multiple open() and reading calls to /dev/radio on bttv-driver.c - added i2c address for lgdt330x. Signed-off-by: Hans J. Koch <koch@hjk-az.de> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:39 +08:00
((matrix == 3) ? 0x03 : 0x00), 1); /* 13 - 16 */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
[PATCH] v4l: BTTV updates and card additions - Remove $Id CVS logs for V4L files - Added DVICO FusionHDTV 5 Lite card. - Added Acorp Y878F. - CodingStyle fixes. - Added tuner_addr to bttv cards structure. - linux/version.h replaced by linux/utsname.h on bttvp.h - kernel module for acquiring RDS data from a SAA6588. - Allow multiple open() and reading calls to /dev/radio on bttv-driver.c - added i2c address for lgdt330x. Signed-off-by: Hans J. Koch <koch@hjk-az.de> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:39 +08:00
((matrix == 0) ? 0x03 : 0x00), 1); /* 1-4 */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
[PATCH] v4l: BTTV updates and card additions - Remove $Id CVS logs for V4L files - Added DVICO FusionHDTV 5 Lite card. - Added Acorp Y878F. - CodingStyle fixes. - Added tuner_addr to bttv cards structure. - linux/version.h replaced by linux/utsname.h on bttvp.h - kernel module for acquiring RDS data from a SAA6588. - Allow multiple open() and reading calls to /dev/radio on bttv-driver.c - added i2c address for lgdt330x. Signed-off-by: Hans J. Koch <koch@hjk-az.de> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:39 +08:00
((matrix == 1) ? 0x03 : 0x00), 1); /* 5-8 */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
[PATCH] v4l: BTTV updates and card additions - Remove $Id CVS logs for V4L files - Added DVICO FusionHDTV 5 Lite card. - Added Acorp Y878F. - CodingStyle fixes. - Added tuner_addr to bttv cards structure. - linux/version.h replaced by linux/utsname.h on bttvp.h - kernel module for acquiring RDS data from a SAA6588. - Allow multiple open() and reading calls to /dev/radio on bttv-driver.c - added i2c address for lgdt330x. Signed-off-by: Hans J. Koch <koch@hjk-az.de> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:39 +08:00
((matrix == 2) ? 0x03 : 0x00), 1); /* 9-12 */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
V4L/DVB (10563): bttv: clean up mux code for IVC-120G The card data for BTTV_BOARD_IVC120 set muxsel to a bunch of bogus values (1 to 16), which the common mux code would use to set the Bt878's mux to some random value. Then the custom code in ivc120_muxsel() would change the Bt878's mux to the right value (always MUX0). Better to just make the muxsel data correct (all zeros, easy!) and get the mux right to begin with. Then the extra Bt878 mux setting code in ivc120_muxsel() can be eliminated (the rest of the code for the IVC-120G's external mux is still there of course). This will help me clean up muxsel for some other changes. It should also get rid of an unnecessary mux switch when changing from certain inputs to certain other inputs on the IVC-120G. Cc: Alan Garfield <alan@fromorbit.com> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
/* 878's MUX0 is already selected for input via muxsel values */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
/* PXC200 muxsel helper
* luke@syseng.anu.edu.au
* another transplant
* from Alessandro Rubini (rubini@linux.it)
*
* There are 4 kinds of cards:
* PXC200L which is bt848
* PXC200F which is bt848 with PIC controlling mux
* PXC200AL which is bt878
* PXC200AF which is bt878 with PIC controlling mux
*/
#define PX_CFG_PXC200F 0x01
#define PX_FLAG_PXC200A 0x00001000 /* a pxc200A is bt-878 based */
#define PX_I2C_PIC 0x0f
#define PX_PXC200A_CARDID 0x200a1295
#define PX_I2C_CMD_CFG 0x00
static void PXC200_muxsel(struct bttv *btv, unsigned int input)
{
[PATCH] v4l: 800: whitespace cleanups - Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
int rc;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
long mux;
int bitmask;
[PATCH] v4l: 800: whitespace cleanups - Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
unsigned char buf[2];
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Read PIC config to determine if this is a PXC200F */
/* PX_I2C_CMD_CFG*/
buf[0]=0;
buf[1]=0;
rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
if (rc) {
printk(KERN_DEBUG "bttv%d: PXC200_muxsel: pic cfg write failed:%d\n", btv->c.nr,rc);
/* not PXC ? do nothing */
return;
}
rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
if (!(rc & PX_CFG_PXC200F)) {
printk(KERN_DEBUG "bttv%d: PXC200_muxsel: not PXC200F rc:%d \n", btv->c.nr,rc);
return;
}
/* The multiplexer in the 200F is handled by the GPIO port */
/* get correct mapping between inputs */
/* mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
/* ** not needed!? */
mux = input;
/* make sure output pins are enabled */
/* bitmask=0x30f; */
bitmask=0x302;
/* check whether we have a PXC200A */
[PATCH] v4l: 800: whitespace cleanups - Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
if (btv->cardid == PX_PXC200A_CARDID) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */
bitmask |= 7<<4; /* the DAC */
}
btwrite(bitmask, BT848_GPIO_OUT_EN);
bitmask = btread(BT848_GPIO_DATA);
[PATCH] v4l: 800: whitespace cleanups - Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
if (btv->cardid == PX_PXC200A_CARDID)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7);
else /* older device */
bitmask = (bitmask & ~0x300) | ((mux & 3) << 8);
btwrite(bitmask,BT848_GPIO_DATA);
/*
* Was "to be safe, set the bt848 to input 0"
* Actually, since it's ok at load time, better not messing
* with these bits (on PXC200AF you need to set mux 2 here)
*
* needed because bttv-driver sets mux before calling this function
*/
[PATCH] v4l: 800: whitespace cleanups - Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
if (btv->cardid == PX_PXC200A_CARDID)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM);
else /* older device */
btand(~BT848_IFORM_MUXSEL,BT848_IFORM);
printk(KERN_DEBUG "bttv%d: setting input channel to:%d\n", btv->c.nr,(int)mux);
}
V4L/DVB (10564): bttv: fix external mux for PHYTEC VD-009 Old versions of the bttv driver would use the high nibble of an input's muxsel value to program the GPIO lines enabled via gpiomask2. Apparently this was supposed to be for switching external audio muxes. Anyway, the code that did this was removed sometime in the pre-git 2.6 series. These phytec boards used this feature to control an external video mux and I guess no one noticed when they removed the code. So add a muxsel_hook for these boards that does the necessary gpio setting. BTW, I doubt the needs_tvaudio setting for these cards is correct. Cc: Dirk Heer <d.heer@phytec.de> Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-29 08:32:59 +08:00
static void phytec_muxsel(struct bttv *btv, unsigned int input)
{
unsigned int mux = input % 4;
if (input == btv->svhs)
mux = 0;
gpio_bits(0x3, mux);
}
V4L/DVB (10827): Add support for GeoVision GV-800(S) I have a GeoVision GV-800(S) card, it has 4 CONEXANT BT878A chips. It has 16 video inputs and 4 audio inputs, and it is almost identical to the GV-800, as seen on http://bttv-gallery.de . The only difference appears to be the analog mux, it has a CD22M3494 in place of the MT8816AP. The card has a blue PCB, as seen in this picture: http://www.gsbr.com.br/imagem/kits/GeoVision%20GV%20800.jpg . This card wasn't originally supported, and it was detected as UNKNOWN/GENERIC. The video inputs weren't working, so I tried "forcing" a few cards like the GeoVision GV-600, but there was still no video. So I made a patch to support this card, based on the Kodicom 4400r. The GV-800(S) is identified as follows: ... 02:00.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:00.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 02:04.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:04.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 02:08.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:08.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) 02:0c.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11) 02:0c.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11) ... 02:00.0 0400: 109e:036e (rev 11) Subsystem: 800a:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdfff000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 Kernel modules: bttv 02:00.1 0480: 109e:0878 (rev 11) Subsystem: 800a:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffe000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 02:04.0 0400: 109e:036e (rev 11) Subsystem: 800b:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffd000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 Kernel modules: bttv 02:04.1 0480: 109e:0878 (rev 11) Subsystem: 800b:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffc000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 02:08.0 0400: 109e:036e (rev 11) Subsystem: 800c:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffb000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 Kernel modules: bttv 02:08.1 0480: 109e:0878 (rev 11) Subsystem: 800c:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdffa000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 02:0c.0 0400: 109e:036e (rev 11) Subsystem: 800d:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdff9000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 Kernel modules: bttv 02:0c.1 0480: 109e:0878 (rev 11) Subsystem: 800d:763d Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at cdff8000 (32-bit, prefetchable) [size=4K] Capabilities: [44] Vital Product Data <?> Capabilities: [4c] Power Management version 2 As you can see, the GV-800(S) card is almost identical to the GV-800 on bttv-gallery, so this patch might also work for that card. If not, only a few changes should be required on the gv800s_write() function. After this patch, the video inputs work correctly on linux 2.6.24 and 2.6.27 using the software 'motion'. The input order may seem a little odd, but it's the order the original software/driver uses, and I decided to keep that order to get the most out of the card. I tried to get the audio working with the snd-bt87x module, but I only get noise from every audio input, even after selecting a different mux with alsamixer. Also, after trying to play sound from those sources, I randomly get a RISC error about an invalid RISC opcode, and then that output stops working. I also can't change the sampling rate when recording. Any pointers to adding audio support are welcome. Signed-off-by: Bruno Christo <bchristo@inf.ufsm.br> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-03 09:38:59 +08:00
/*
* GeoVision GV-800(S) functions
* Bruno Christo <bchristo@inf.ufsm.br>
*/
/* This is a function to control the analog switch, which determines which
* camera is routed to which controller. The switch comprises an X-address
* (gpio bits 0-3, representing the camera, ranging from 0-15), and a
* Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
* A data value (gpio bit 18) of '1' enables the switch, and '0' disables
* the switch. A STROBE bit (gpio bit 17) latches the data value into the
* specified address. There is also a chip select (gpio bit 16).
* The idea is to set the address and chip select together, bring
* STROBE high, write the data, and finally bring STROBE back to low.
*/
static void gv800s_write(struct bttv *btv,
unsigned char xaddr,
unsigned char yaddr,
unsigned char data) {
/* On the "master" 878A:
* GPIO bits 0-9 are used for the analog switch:
* 00 - 03: camera selector
* 04 - 06: 878A (controller) selector
* 16: cselect
* 17: strobe
* 18: data (1->on, 0->off)
* 19: reset
*/
const u32 ADDRESS = ((xaddr&0xf) | (yaddr&3)<<4);
const u32 CSELECT = 1<<16;
const u32 STROBE = 1<<17;
const u32 DATA = data<<18;
gpio_bits(0x1007f, ADDRESS | CSELECT); /* write ADDRESS and CSELECT */
gpio_bits(0x20000, STROBE); /* STROBE high */
gpio_bits(0x40000, DATA); /* write DATA */
gpio_bits(0x20000, ~STROBE); /* STROBE low */
}
/*
* GeoVision GV-800(S) muxsel
*
* Each of the 4 cards (controllers) use this function.
* The controller using this function selects the input through the GPIO pins
* of the "master" card. A pointer to this card is stored in master[btv->c.nr].
*
* The parameter 'input' is the requested camera number (0-4) on the controller.
* The map array has the address of each input. Note that the addresses in the
* array are in the sequence the original GeoVision driver uses, that is, set
* every controller to input 0, then to input 1, 2, 3, repeat. This means that
* the physical "camera 1" connector corresponds to controller 0 input 0,
* "camera 2" corresponds to controller 1 input 0, and so on.
*
* After getting the input address, the function then writes the appropriate
* data to the analog switch, and housekeeps the local copy of the switch
* information.
*/
static void gv800s_muxsel(struct bttv *btv, unsigned int input)
{
struct bttv *mctlr;
char *sw_status;
int xaddr, yaddr;
static unsigned int map[4][4] = { { 0x0, 0x4, 0xa, 0x6 },
{ 0x1, 0x5, 0xb, 0x7 },
{ 0x2, 0x8, 0xc, 0xe },
{ 0x3, 0x9, 0xd, 0xf } };
input = input%4;
mctlr = master[btv->c.nr];
if (mctlr == NULL) {
/* do nothing until the "master" is detected */
return;
}
yaddr = (btv->c.nr - mctlr->c.nr) & 3;
sw_status = (char *)(&mctlr->mbox_we);
xaddr = map[yaddr][input] & 0xf;
/* Check if the controller/camera pair has changed, ignore otherwise */
if (sw_status[yaddr] != xaddr) {
/* disable the old switch, enable the new one and save status */
gv800s_write(mctlr, sw_status[yaddr], yaddr, 0);
sw_status[yaddr] = xaddr;
gv800s_write(mctlr, xaddr, yaddr, 1);
}
}
/* GeoVision GV-800(S) "master" chip init */
static void gv800s_init(struct bttv *btv)
{
char *sw_status = (char *)(&btv->mbox_we);
int ix;
gpio_inout(0xf107f, 0xf107f);
gpio_write(1<<19); /* reset the analog MUX */
gpio_write(0);
/* Preset camera 0 to the 4 controllers */
for (ix = 0; ix < 4; ix++) {
sw_status[ix] = ix;
gv800s_write(btv, ix, ix, 1);
}
/* Inputs on the "master" controller need this brightness fix */
bttv_I2CWrite(btv, 0x18, 0x5, 0x90, 1);
if (btv->c.nr > BTTV_MAX-4)
return;
/*
* Store the "master" controller pointer in the master
* array for later use in the muxsel function.
*/
master[btv->c.nr] = btv;
master[btv->c.nr+1] = btv;
master[btv->c.nr+2] = btv;
master[btv->c.nr+3] = btv;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* ----------------------------------------------------------------------- */
/* motherboard chipset specific stuff */
V4L/DVB (6797): bt8xx/ section fixes This patch fixes the following section mismatch with CONFIG_HOTPLUG=n: <-- snip --> ... ... <-- snip --> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-12-12 06:23:43 +08:00
void __init bttv_check_chipset(void)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
int pcipci_fail = 0;
struct pci_dev *dev = NULL;
V4L/DVB (4635): Extend bttv and saa7134 to check for both AGP and PCI PCI failure case We could go and work out if the target object is AGP or PCI but the corner case of an Athlon 64 era box with PCI video is sufficiently unusual it doesn't seem worth the extra work, at least until other cases if any pop up. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-09-14 22:53:16 +08:00
if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL)) /* should check if target is AGP */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
pcipci_fail = 1;
if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
triton1 = 1;
if (pci_pci_problems & PCIPCI_VSFX)
vsfx = 1;
#ifdef PCIPCI_ALIMAGIK
if (pci_pci_problems & PCIPCI_ALIMAGIK)
latency = 0x0A;
#endif
/* print warnings about any quirks found */
if (triton1)
printk(KERN_INFO "bttv: Host bridge needs ETBF enabled.\n");
if (vsfx)
printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n");
if (pcipci_fail) {
V4L/DVB (3439): Added no_overlay option and quirks to saa7134 Some chipsets have several problems when pci to pci transfers are activated on overlay mode. the option no_overlay allows disabling such feature of the driver, in favor of keeping the system stable. The default is to use pcipci_fail flag defined on drivers/pci/quirks.c. It also allows the user to override it by forcing disable overlay or forcing enable. Forcing enable may generate PCI transfer corruption, including disk mass corruption, so should be used with care. Added a text description to this option and make messages looks the same at both bttv and saa7134 drivers. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-11 03:46:50 +08:00
printk(KERN_INFO "bttv: bttv and your chipset may not work "
"together.\n");
[PATCH] v4l: oopsfix for BTTV on badly behaved PCI chipsets no_overlay bttv parameter implemented to fix OOPS on some PCI chipsets (like some VIA) with these behaviors: 1) If pci_quicks does identify the chip as having troubles to handle PCI2PCI transfers, no_overlay defaults to 1. The user may force it to 0, to reenable (not recommended). 2) For newer chipsets not blacklisted, no_overlay=1 is provided as a workaround until PCI chipset included on /drivers/pci/quirks.c Thanks to Bodo Eggert <7eggert@gmx.de> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-05 03:53:30 +08:00
if (!no_overlay) {
V4L/DVB (3439): Added no_overlay option and quirks to saa7134 Some chipsets have several problems when pci to pci transfers are activated on overlay mode. the option no_overlay allows disabling such feature of the driver, in favor of keeping the system stable. The default is to use pcipci_fail flag defined on drivers/pci/quirks.c. It also allows the user to override it by forcing disable overlay or forcing enable. Forcing enable may generate PCI transfer corruption, including disk mass corruption, so should be used with care. Added a text description to this option and make messages looks the same at both bttv and saa7134 drivers. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-11 03:46:50 +08:00
printk(KERN_INFO "bttv: overlay will be disabled.\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
no_overlay = 1;
[PATCH] v4l: oopsfix for BTTV on badly behaved PCI chipsets no_overlay bttv parameter implemented to fix OOPS on some PCI chipsets (like some VIA) with these behaviors: 1) If pci_quicks does identify the chip as having troubles to handle PCI2PCI transfers, no_overlay defaults to 1. The user may force it to 0, to reenable (not recommended). 2) For newer chipsets not blacklisted, no_overlay=1 is provided as a workaround until PCI chipset included on /drivers/pci/quirks.c Thanks to Bodo Eggert <7eggert@gmx.de> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-05 03:53:30 +08:00
} else {
V4L/DVB (3439): Added no_overlay option and quirks to saa7134 Some chipsets have several problems when pci to pci transfers are activated on overlay mode. the option no_overlay allows disabling such feature of the driver, in favor of keeping the system stable. The default is to use pcipci_fail flag defined on drivers/pci/quirks.c. It also allows the user to override it by forcing disable overlay or forcing enable. Forcing enable may generate PCI transfer corruption, including disk mass corruption, so should be used with care. Added a text description to this option and make messages looks the same at both bttv and saa7134 drivers. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-11 03:46:50 +08:00
printk(KERN_INFO "bttv: overlay forced. Use this "
"option at your own risk.\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
}
if (UNSET != latency)
printk(KERN_INFO "bttv: pci latency fixup [%d]\n",latency);
[PATCH] v4l: 692: bttv coding style and card ids - BTTV Boards now use the same CodingStyle as cx88 and saa7134. - Included missing card numbers Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:36:51 +08:00
while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
PCI_DEVICE_ID_INTEL_82441, dev))) {
[PATCH] v4l: 800: whitespace cleanups - Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
unsigned char b;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
pci_read_config_byte(dev, 0x53, &b);
if (bttv_debug)
printk(KERN_INFO "bttv: Host bridge: 82441FX Natoma, "
"bufcon=0x%02x\n",b);
}
}
int __devinit bttv_handle_chipset(struct bttv *btv)
{
[PATCH] v4l: 800: whitespace cleanups - Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
unsigned char command;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (!triton1 && !vsfx && UNSET == latency)
return 0;
if (bttv_verbose) {
if (triton1)
printk(KERN_INFO "bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv->c.nr);
if (vsfx && btv->id >= 878)
printk(KERN_INFO "bttv%d: enabling VSFX\n",btv->c.nr);
if (UNSET != latency)
printk(KERN_INFO "bttv%d: setting pci timer to %d\n",
btv->c.nr,latency);
}
if (btv->id < 878) {
/* bt848 (mis)uses a bit in the irq mask for etbf */
if (triton1)
btv->triton1 = BT848_INT_ETBF;
} else {
/* bt878 has a bit in the pci config space for it */
[PATCH] v4l: 800: whitespace cleanups - Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (triton1)
command |= BT878_EN_TBFX;
if (vsfx)
command |= BT878_EN_VSFX;
[PATCH] v4l: 800: whitespace cleanups - Whitespace Cleanups. Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 13:37:43 +08:00
pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
if (UNSET != latency)
pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency);
return 0;
}
/*
* Local variables:
* c-basic-offset: 8
* End:
*/