OpenCloudOS-Kernel/sound/soc/soc-jack.c

455 lines
11 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
//
// soc-jack.c -- ALSA SoC jack handling
//
// Copyright 2008 Wolfson Microelectronics PLC.
//
// Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
#include <sound/jack.h>
#include <sound/soc.h>
#include <linux/gpio.h>
#include <linux/gpio/consumer.h>
#include <linux/interrupt.h>
#include <linux/workqueue.h>
#include <linux/delay.h>
#include <linux/export.h>
#include <linux/suspend.h>
#include <trace/events/asoc.h>
/**
* snd_soc_jack_report - Report the current status for a jack
*
* @jack: the jack
* @status: a bitmask of enum snd_jack_type values that are currently detected.
* @mask: a bitmask of enum snd_jack_type values that being reported.
*
* If configured using snd_soc_jack_add_pins() then the associated
* DAPM pins will be enabled or disabled as appropriate and DAPM
* synchronised.
*
* Note: This function uses mutexes and should be called from a
* context which can sleep (such as a workqueue).
*/
void snd_soc_jack_report(struct snd_soc_jack *jack, int status, int mask)
{
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 21:53:46 +08:00
struct snd_soc_dapm_context *dapm;
struct snd_soc_jack_pin *pin;
unsigned int sync = 0;
if (!jack || !jack->jack)
return;
trace_snd_soc_jack_report(jack, mask, status);
ASoC: Allow to register jacks at the card level Jacks are typically card level elements, but are currently registered with a CODEC. When it was originally introduced snd_soc_jack_new() took a snd_soc_card as its parameter, but at that time DAPM was only implemented at the CODEC level and there was only one CODEC per card. This made it clear which CODEC to use for the jack DAPM operations. But the multi-component patchset added support for having multiple CODECs per card and with it the API was updated to register jacks with a specific CODEC instance instead. Subsequently DAPM support at the card level has been introduced, but the snd_soc_jack_new() API has so remained unchanged. This leaves us with the issue that the DAPM pins that are managed by the jack detection logic usually are part of the card DAPM context but are accessed through a CODEC DAPM context. Currently this works fine, but might break in the future if we take a more hierarchical approach to DAPM contexts. Furthermore with componentization progressing systems that do not register a snd_soc_codec might appear, while these system may still want to able to register a jack. This patch addresses these issues by adding a new function called snd_soc_card_jack_new() that can be used to register jacks with the card rather than a CODEC. This new function is mostly identical to snd_soc_jack_new() except that it additionally allows to directly specify the DAPM pins associated with the jack. This was done since most users of snd_soc_jack_new() typically call snd_soc_jack_add_pins() right after it, which is not necessary with the new API and allows to reduce the amount of boiler plate code. The old snd_soc_jack_new() is re-implemented as a wrapper around snd_soc_card_jack_new(). Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-04 17:33:17 +08:00
dapm = &jack->card->dapm;
mutex_lock(&jack->mutex);
jack->status &= ~mask;
jack->status |= status & mask;
trace_snd_soc_jack_notify(jack, status);
list_for_each_entry(pin, &jack->pins, list) {
int enable = pin->mask & jack->status;
if (pin->invert)
enable = !enable;
if (enable)
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 21:53:46 +08:00
snd_soc_dapm_enable_pin(dapm, pin->pin);
else
ASoC: Decouple DAPM from CODECs Decoupling Dynamic Audio Power Management (DAPM) from codec devices is required when developing ASoC further. Such as for other ASoC components to have DAPM widgets or when extending DAPM to handle cross-device paths. This patch decouples DAPM related variables from struct snd_soc_codec and moves them to new struct snd_soc_dapm_context that is used to encapsulate DAPM context of a device. ASoC core and API of DAPM functions are modified to use DAPM context instead of codec. This patch does not change current functionality and a large part of changes come because of structure and internal API changes. Core implementation is from Liam Girdwood <lrg@slimlogic.co.uk> with some minor core changes, codecs and machine driver conversions from Jarkko Nikula <jhnikula@gmail.com>. Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Manuel Lauss <manuel.lauss@googlemail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Cc: Cliff Cai <cliff.cai@analog.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: Timur Tabi <timur@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Jassi Brar <jassi.brar@samsung.com> Cc: Daniel Gloeckner <dg@emlix.com> Cc: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-11-05 21:53:46 +08:00
snd_soc_dapm_disable_pin(dapm, pin->pin);
/* we need to sync for this case only */
sync = 1;
}
/* Report before the DAPM sync to help users updating micbias status */
blocking_notifier_call_chain(&jack->notifier, jack->status, jack);
if (sync)
snd_soc_dapm_sync(dapm);
snd_jack_report(jack->jack, jack->status);
mutex_unlock(&jack->mutex);
}
EXPORT_SYMBOL_GPL(snd_soc_jack_report);
/**
* snd_soc_jack_add_zones - Associate voltage zones with jack
*
* @jack: ASoC jack
* @count: Number of zones
* @zones: Array of zones
*
* After this function has been called the zones specified in the
* array will be associated with the jack.
*/
int snd_soc_jack_add_zones(struct snd_soc_jack *jack, int count,
struct snd_soc_jack_zone *zones)
{
int i;
for (i = 0; i < count; i++) {
INIT_LIST_HEAD(&zones[i].list);
list_add(&(zones[i].list), &jack->jack_zones);
}
return 0;
}
EXPORT_SYMBOL_GPL(snd_soc_jack_add_zones);
/**
* snd_soc_jack_get_type - Based on the mic bias value, this function returns
* the type of jack from the zones declared in the jack type
*
* @jack: ASoC jack
* @micbias_voltage: mic bias voltage at adc channel when jack is plugged in
*
* Based on the mic bias value passed, this function helps identify
* the type of jack from the already declared jack zones
*/
int snd_soc_jack_get_type(struct snd_soc_jack *jack, int micbias_voltage)
{
struct snd_soc_jack_zone *zone;
list_for_each_entry(zone, &jack->jack_zones, list) {
if (micbias_voltage >= zone->min_mv &&
micbias_voltage < zone->max_mv)
return zone->jack_type;
}
return 0;
}
EXPORT_SYMBOL_GPL(snd_soc_jack_get_type);
/**
* snd_soc_jack_add_pins - Associate DAPM pins with an ASoC jack
*
* @jack: ASoC jack created with snd_soc_card_jack_new_pins()
* @count: Number of pins
* @pins: Array of pins
*
* After this function has been called the DAPM pins specified in the
* pins array will have their status updated to reflect the current
* state of the jack whenever the jack status is updated.
*/
int snd_soc_jack_add_pins(struct snd_soc_jack *jack, int count,
struct snd_soc_jack_pin *pins)
{
int i;
for (i = 0; i < count; i++) {
if (!pins[i].pin) {
ASoC: Allow to register jacks at the card level Jacks are typically card level elements, but are currently registered with a CODEC. When it was originally introduced snd_soc_jack_new() took a snd_soc_card as its parameter, but at that time DAPM was only implemented at the CODEC level and there was only one CODEC per card. This made it clear which CODEC to use for the jack DAPM operations. But the multi-component patchset added support for having multiple CODECs per card and with it the API was updated to register jacks with a specific CODEC instance instead. Subsequently DAPM support at the card level has been introduced, but the snd_soc_jack_new() API has so remained unchanged. This leaves us with the issue that the DAPM pins that are managed by the jack detection logic usually are part of the card DAPM context but are accessed through a CODEC DAPM context. Currently this works fine, but might break in the future if we take a more hierarchical approach to DAPM contexts. Furthermore with componentization progressing systems that do not register a snd_soc_codec might appear, while these system may still want to able to register a jack. This patch addresses these issues by adding a new function called snd_soc_card_jack_new() that can be used to register jacks with the card rather than a CODEC. This new function is mostly identical to snd_soc_jack_new() except that it additionally allows to directly specify the DAPM pins associated with the jack. This was done since most users of snd_soc_jack_new() typically call snd_soc_jack_add_pins() right after it, which is not necessary with the new API and allows to reduce the amount of boiler plate code. The old snd_soc_jack_new() is re-implemented as a wrapper around snd_soc_card_jack_new(). Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-04 17:33:17 +08:00
dev_err(jack->card->dev, "ASoC: No name for pin %d\n",
i);
return -EINVAL;
}
if (!pins[i].mask) {
ASoC: Allow to register jacks at the card level Jacks are typically card level elements, but are currently registered with a CODEC. When it was originally introduced snd_soc_jack_new() took a snd_soc_card as its parameter, but at that time DAPM was only implemented at the CODEC level and there was only one CODEC per card. This made it clear which CODEC to use for the jack DAPM operations. But the multi-component patchset added support for having multiple CODECs per card and with it the API was updated to register jacks with a specific CODEC instance instead. Subsequently DAPM support at the card level has been introduced, but the snd_soc_jack_new() API has so remained unchanged. This leaves us with the issue that the DAPM pins that are managed by the jack detection logic usually are part of the card DAPM context but are accessed through a CODEC DAPM context. Currently this works fine, but might break in the future if we take a more hierarchical approach to DAPM contexts. Furthermore with componentization progressing systems that do not register a snd_soc_codec might appear, while these system may still want to able to register a jack. This patch addresses these issues by adding a new function called snd_soc_card_jack_new() that can be used to register jacks with the card rather than a CODEC. This new function is mostly identical to snd_soc_jack_new() except that it additionally allows to directly specify the DAPM pins associated with the jack. This was done since most users of snd_soc_jack_new() typically call snd_soc_jack_add_pins() right after it, which is not necessary with the new API and allows to reduce the amount of boiler plate code. The old snd_soc_jack_new() is re-implemented as a wrapper around snd_soc_card_jack_new(). Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-04 17:33:17 +08:00
dev_err(jack->card->dev, "ASoC: No mask for pin %d"
" (%s)\n", i, pins[i].pin);
return -EINVAL;
}
INIT_LIST_HEAD(&pins[i].list);
list_add(&(pins[i].list), &jack->pins);
snd_jack_add_new_kctl(jack->jack, pins[i].pin, pins[i].mask);
}
/* Update to reflect the last reported status; canned jack
* implementations are likely to set their state before the
* card has an opportunity to associate pins.
*/
snd_soc_jack_report(jack, 0, 0);
return 0;
}
EXPORT_SYMBOL_GPL(snd_soc_jack_add_pins);
/**
* snd_soc_jack_notifier_register - Register a notifier for jack status
*
* @jack: ASoC jack
* @nb: Notifier block to register
*
* Register for notification of the current status of the jack. Note
* that it is not possible to report additional jack events in the
* callback from the notifier, this is intended to support
* applications such as enabling electrical detection only when a
* mechanical detection event has occurred.
*/
void snd_soc_jack_notifier_register(struct snd_soc_jack *jack,
struct notifier_block *nb)
{
blocking_notifier_chain_register(&jack->notifier, nb);
}
EXPORT_SYMBOL_GPL(snd_soc_jack_notifier_register);
/**
* snd_soc_jack_notifier_unregister - Unregister a notifier for jack status
*
* @jack: ASoC jack
* @nb: Notifier block to unregister
*
* Stop notifying for status changes.
*/
void snd_soc_jack_notifier_unregister(struct snd_soc_jack *jack,
struct notifier_block *nb)
{
blocking_notifier_chain_unregister(&jack->notifier, nb);
}
EXPORT_SYMBOL_GPL(snd_soc_jack_notifier_unregister);
#ifdef CONFIG_GPIOLIB
struct jack_gpio_tbl {
int count;
struct snd_soc_jack *jack;
struct snd_soc_jack_gpio *gpios;
};
/* gpio detect */
static void snd_soc_jack_gpio_detect(struct snd_soc_jack_gpio *gpio)
{
struct snd_soc_jack *jack = gpio->jack;
int enable;
int report;
enable = gpiod_get_value_cansleep(gpio->desc);
if (gpio->invert)
enable = !enable;
if (enable)
report = gpio->report;
else
report = 0;
if (gpio->jack_status_check)
report = gpio->jack_status_check(gpio->data);
snd_soc_jack_report(jack, report, gpio->report);
}
/* irq handler for gpio pin */
static irqreturn_t gpio_handler(int irq, void *data)
{
struct snd_soc_jack_gpio *gpio = data;
ASoC: Allow to register jacks at the card level Jacks are typically card level elements, but are currently registered with a CODEC. When it was originally introduced snd_soc_jack_new() took a snd_soc_card as its parameter, but at that time DAPM was only implemented at the CODEC level and there was only one CODEC per card. This made it clear which CODEC to use for the jack DAPM operations. But the multi-component patchset added support for having multiple CODECs per card and with it the API was updated to register jacks with a specific CODEC instance instead. Subsequently DAPM support at the card level has been introduced, but the snd_soc_jack_new() API has so remained unchanged. This leaves us with the issue that the DAPM pins that are managed by the jack detection logic usually are part of the card DAPM context but are accessed through a CODEC DAPM context. Currently this works fine, but might break in the future if we take a more hierarchical approach to DAPM contexts. Furthermore with componentization progressing systems that do not register a snd_soc_codec might appear, while these system may still want to able to register a jack. This patch addresses these issues by adding a new function called snd_soc_card_jack_new() that can be used to register jacks with the card rather than a CODEC. This new function is mostly identical to snd_soc_jack_new() except that it additionally allows to directly specify the DAPM pins associated with the jack. This was done since most users of snd_soc_jack_new() typically call snd_soc_jack_add_pins() right after it, which is not necessary with the new API and allows to reduce the amount of boiler plate code. The old snd_soc_jack_new() is re-implemented as a wrapper around snd_soc_card_jack_new(). Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-04 17:33:17 +08:00
struct device *dev = gpio->jack->card->dev;
trace_snd_soc_jack_irq(gpio->name);
if (device_may_wakeup(dev))
pm_wakeup_event(dev, gpio->debounce_time + 50);
queue_delayed_work(system_power_efficient_wq, &gpio->work,
msecs_to_jiffies(gpio->debounce_time));
return IRQ_HANDLED;
}
/* gpio work */
static void gpio_work(struct work_struct *work)
{
struct snd_soc_jack_gpio *gpio;
gpio = container_of(work, struct snd_soc_jack_gpio, work.work);
snd_soc_jack_gpio_detect(gpio);
}
static int snd_soc_jack_pm_notifier(struct notifier_block *nb,
unsigned long action, void *data)
{
struct snd_soc_jack_gpio *gpio =
container_of(nb, struct snd_soc_jack_gpio, pm_notifier);
switch (action) {
case PM_POST_SUSPEND:
case PM_POST_HIBERNATION:
case PM_POST_RESTORE:
/*
* Use workqueue so we do not have to care about running
* concurrently with work triggered by the interrupt handler.
*/
queue_delayed_work(system_power_efficient_wq, &gpio->work, 0);
break;
}
return NOTIFY_DONE;
}
static void jack_free_gpios(struct snd_soc_jack *jack, int count,
struct snd_soc_jack_gpio *gpios)
{
int i;
for (i = 0; i < count; i++) {
gpiod_unexport(gpios[i].desc);
unregister_pm_notifier(&gpios[i].pm_notifier);
free_irq(gpiod_to_irq(gpios[i].desc), &gpios[i]);
cancel_delayed_work_sync(&gpios[i].work);
gpiod_put(gpios[i].desc);
gpios[i].jack = NULL;
}
}
static void jack_devres_free_gpios(struct device *dev, void *res)
{
struct jack_gpio_tbl *tbl = res;
jack_free_gpios(tbl->jack, tbl->count, tbl->gpios);
}
/**
* snd_soc_jack_add_gpios - Associate GPIO pins with an ASoC jack
*
* @jack: ASoC jack
* @count: number of pins
* @gpios: array of gpio pins
*
* This function will request gpio, set data direction and request irq
* for each gpio in the array.
*/
int snd_soc_jack_add_gpios(struct snd_soc_jack *jack, int count,
struct snd_soc_jack_gpio *gpios)
{
int i, ret;
struct jack_gpio_tbl *tbl;
tbl = devres_alloc(jack_devres_free_gpios, sizeof(*tbl), GFP_KERNEL);
if (!tbl)
return -ENOMEM;
tbl->jack = jack;
tbl->count = count;
tbl->gpios = gpios;
for (i = 0; i < count; i++) {
if (!gpios[i].name) {
ASoC: Allow to register jacks at the card level Jacks are typically card level elements, but are currently registered with a CODEC. When it was originally introduced snd_soc_jack_new() took a snd_soc_card as its parameter, but at that time DAPM was only implemented at the CODEC level and there was only one CODEC per card. This made it clear which CODEC to use for the jack DAPM operations. But the multi-component patchset added support for having multiple CODECs per card and with it the API was updated to register jacks with a specific CODEC instance instead. Subsequently DAPM support at the card level has been introduced, but the snd_soc_jack_new() API has so remained unchanged. This leaves us with the issue that the DAPM pins that are managed by the jack detection logic usually are part of the card DAPM context but are accessed through a CODEC DAPM context. Currently this works fine, but might break in the future if we take a more hierarchical approach to DAPM contexts. Furthermore with componentization progressing systems that do not register a snd_soc_codec might appear, while these system may still want to able to register a jack. This patch addresses these issues by adding a new function called snd_soc_card_jack_new() that can be used to register jacks with the card rather than a CODEC. This new function is mostly identical to snd_soc_jack_new() except that it additionally allows to directly specify the DAPM pins associated with the jack. This was done since most users of snd_soc_jack_new() typically call snd_soc_jack_add_pins() right after it, which is not necessary with the new API and allows to reduce the amount of boiler plate code. The old snd_soc_jack_new() is re-implemented as a wrapper around snd_soc_card_jack_new(). Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-04 17:33:17 +08:00
dev_err(jack->card->dev,
"ASoC: No name for gpio at index %d\n", i);
ret = -EINVAL;
goto undo;
}
if (gpios[i].desc) {
/* Already have a GPIO descriptor. */
goto got_gpio;
} else if (gpios[i].gpiod_dev) {
/* Get a GPIO descriptor */
gpios[i].desc = gpiod_get_index(gpios[i].gpiod_dev,
gpios[i].name,
gpios[i].idx, GPIOD_IN);
if (IS_ERR(gpios[i].desc)) {
ret = PTR_ERR(gpios[i].desc);
dev_err(gpios[i].gpiod_dev,
"ASoC: Cannot get gpio at index %d: %d",
i, ret);
goto undo;
}
} else {
/* legacy GPIO number */
if (!gpio_is_valid(gpios[i].gpio)) {
ASoC: Allow to register jacks at the card level Jacks are typically card level elements, but are currently registered with a CODEC. When it was originally introduced snd_soc_jack_new() took a snd_soc_card as its parameter, but at that time DAPM was only implemented at the CODEC level and there was only one CODEC per card. This made it clear which CODEC to use for the jack DAPM operations. But the multi-component patchset added support for having multiple CODECs per card and with it the API was updated to register jacks with a specific CODEC instance instead. Subsequently DAPM support at the card level has been introduced, but the snd_soc_jack_new() API has so remained unchanged. This leaves us with the issue that the DAPM pins that are managed by the jack detection logic usually are part of the card DAPM context but are accessed through a CODEC DAPM context. Currently this works fine, but might break in the future if we take a more hierarchical approach to DAPM contexts. Furthermore with componentization progressing systems that do not register a snd_soc_codec might appear, while these system may still want to able to register a jack. This patch addresses these issues by adding a new function called snd_soc_card_jack_new() that can be used to register jacks with the card rather than a CODEC. This new function is mostly identical to snd_soc_jack_new() except that it additionally allows to directly specify the DAPM pins associated with the jack. This was done since most users of snd_soc_jack_new() typically call snd_soc_jack_add_pins() right after it, which is not necessary with the new API and allows to reduce the amount of boiler plate code. The old snd_soc_jack_new() is re-implemented as a wrapper around snd_soc_card_jack_new(). Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-04 17:33:17 +08:00
dev_err(jack->card->dev,
"ASoC: Invalid gpio %d\n",
gpios[i].gpio);
ret = -EINVAL;
goto undo;
}
ret = gpio_request_one(gpios[i].gpio, GPIOF_IN,
gpios[i].name);
if (ret)
goto undo;
gpios[i].desc = gpio_to_desc(gpios[i].gpio);
}
got_gpio:
INIT_DELAYED_WORK(&gpios[i].work, gpio_work);
gpios[i].jack = jack;
ret = request_any_context_irq(gpiod_to_irq(gpios[i].desc),
gpio_handler,
IRQF_SHARED |
IRQF_TRIGGER_RISING |
IRQF_TRIGGER_FALLING,
gpios[i].name,
&gpios[i]);
if (ret < 0)
goto err;
if (gpios[i].wake) {
ret = irq_set_irq_wake(gpiod_to_irq(gpios[i].desc), 1);
if (ret != 0)
ASoC: Allow to register jacks at the card level Jacks are typically card level elements, but are currently registered with a CODEC. When it was originally introduced snd_soc_jack_new() took a snd_soc_card as its parameter, but at that time DAPM was only implemented at the CODEC level and there was only one CODEC per card. This made it clear which CODEC to use for the jack DAPM operations. But the multi-component patchset added support for having multiple CODECs per card and with it the API was updated to register jacks with a specific CODEC instance instead. Subsequently DAPM support at the card level has been introduced, but the snd_soc_jack_new() API has so remained unchanged. This leaves us with the issue that the DAPM pins that are managed by the jack detection logic usually are part of the card DAPM context but are accessed through a CODEC DAPM context. Currently this works fine, but might break in the future if we take a more hierarchical approach to DAPM contexts. Furthermore with componentization progressing systems that do not register a snd_soc_codec might appear, while these system may still want to able to register a jack. This patch addresses these issues by adding a new function called snd_soc_card_jack_new() that can be used to register jacks with the card rather than a CODEC. This new function is mostly identical to snd_soc_jack_new() except that it additionally allows to directly specify the DAPM pins associated with the jack. This was done since most users of snd_soc_jack_new() typically call snd_soc_jack_add_pins() right after it, which is not necessary with the new API and allows to reduce the amount of boiler plate code. The old snd_soc_jack_new() is re-implemented as a wrapper around snd_soc_card_jack_new(). Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-04 17:33:17 +08:00
dev_err(jack->card->dev,
"ASoC: Failed to mark GPIO at index %d as wake source: %d\n",
i, ret);
}
/*
* Register PM notifier so we do not miss state transitions
* happening while system is asleep.
*/
gpios[i].pm_notifier.notifier_call = snd_soc_jack_pm_notifier;
register_pm_notifier(&gpios[i].pm_notifier);
/* Expose GPIO value over sysfs for diagnostic purposes */
gpiod_export(gpios[i].desc, false);
/* Update initial jack status */
schedule_delayed_work(&gpios[i].work,
msecs_to_jiffies(gpios[i].debounce_time));
}
devres_add(jack->card->dev, tbl);
return 0;
err:
gpio_free(gpios[i].gpio);
undo:
jack_free_gpios(jack, i, gpios);
devres_free(tbl);
return ret;
}
EXPORT_SYMBOL_GPL(snd_soc_jack_add_gpios);
/**
* snd_soc_jack_add_gpiods - Associate GPIO descriptor pins with an ASoC jack
*
* @gpiod_dev: GPIO consumer device
* @jack: ASoC jack
* @count: number of pins
* @gpios: array of gpio pins
*
* This function will request gpio, set data direction and request irq
* for each gpio in the array.
*/
int snd_soc_jack_add_gpiods(struct device *gpiod_dev,
struct snd_soc_jack *jack,
int count, struct snd_soc_jack_gpio *gpios)
{
int i;
for (i = 0; i < count; i++)
gpios[i].gpiod_dev = gpiod_dev;
return snd_soc_jack_add_gpios(jack, count, gpios);
}
EXPORT_SYMBOL_GPL(snd_soc_jack_add_gpiods);
/**
* snd_soc_jack_free_gpios - Release GPIO pins' resources of an ASoC jack
*
* @jack: ASoC jack
* @count: number of pins
* @gpios: array of gpio pins
*
* Release gpio and irq resources for gpio pins associated with an ASoC jack.
*/
void snd_soc_jack_free_gpios(struct snd_soc_jack *jack, int count,
struct snd_soc_jack_gpio *gpios)
{
jack_free_gpios(jack, count, gpios);
devres_destroy(jack->card->dev, jack_devres_free_gpios, NULL, NULL);
}
EXPORT_SYMBOL_GPL(snd_soc_jack_free_gpios);
#endif /* CONFIG_GPIOLIB */