UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/arch/arm/Kconfig.debug

687 lines
21 KiB
Plaintext
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
menu "Kernel hacking"
source "lib/Kconfig.debug"
ARM: implement CONFIG_STRICT_DEVMEM by disabling access to RAM via /dev/mem There are very few legitimate use cases, if any, for directly accessing system RAM through /dev/mem. So let's mimic what they do on x86 and forbid it when CONFIG_STRICT_DEVMEM is turned on. Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2010-09-23 06:34:36 +08:00
config STRICT_DEVMEM
bool "Filter access to /dev/mem"
depends on MMU
---help---
If this option is disabled, you allow userspace (root) access to all
of memory, including kernel and userspace memory. Accidental
access to this is obviously disastrous, but specific access can
be used by people debugging the kernel.
If this option is switched on, the /dev/mem file only allows
userspace access to memory mapped peripherals.
If in doubt, say Y.
[ARM] 5386/2: unwind: Add Makefile and Kconfig entries for ARM stack unwinding This patch also makes the frame pointer default to y only if !ARM_UNWIND. LOCKDEP no longer selects FRAME_POINTER if ARM_UNWIND is enabled. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-12 20:56:34 +08:00
# RMK wants arm kernels compiled with frame pointers or stack unwinding.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
# If you know what you are doing and are willing to live without stack
# traces, you can get a slightly smaller kernel by setting this option to
# n, but then RMK will have to kill you ;).
config FRAME_POINTER
bool
Thumb-2: Add Thumb-2 support to the build files This patch adds the necessary entries to the Makefile and Kconfig files for building the Thumb-2 kernel. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2009-07-24 19:33:02 +08:00
depends on !THUMB2_KERNEL
ARM: ftrace: enable function graph tracer Add the options to enable the function graph tracer on ARM. Function graph tracer support requires frame pointers, so exclude Thumb-2 and also make sure FRAME_POINTER gets enabled when FUNCTION_GRAPH_TRACER is used, since FUNCTION_TRACER doesn't "select FRAME_POINTER" when ARM_UNWIND is used. Therefore, with GCC 4.4.0+, you get plain function tracing without frame pointers, but you'll need them if you want function graph tracing. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Rabin Vincent <rabin@rab.in>
2010-11-07 01:33:53 +08:00
default y if !ARM_UNWIND || FUNCTION_GRAPH_TRACER
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
help
If you say N here, the resulting kernel will be slightly smaller and
[ARM] 5386/2: unwind: Add Makefile and Kconfig entries for ARM stack unwinding This patch also makes the frame pointer default to y only if !ARM_UNWIND. LOCKDEP no longer selects FRAME_POINTER if ARM_UNWIND is enabled. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-12 20:56:34 +08:00
faster. However, if neither FRAME_POINTER nor ARM_UNWIND are enabled,
when a problem occurs with the kernel, the information that is
reported is severely limited.
config ARM_UNWIND
ARM: Ensure experimental options are so marked It is kernel-wide policy that options depending on EXPERIMENTAL should also have '(EXPERIMENTAL)' in their option text, and options with '(EXPERIMENTAL)' depend on EXPERIMENTAL. Ensure that all ARM options comply with this. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-12-06 07:06:22 +08:00
bool "Enable stack unwinding support (EXPERIMENTAL)"
arch/arm: remove depends on CONFIG_EXPERIMENTAL The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. CC: Russell King <linux@arm.linux.org.uk> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-17 10:53:14 +08:00
depends on AEABI
[ARM] 5386/2: unwind: Add Makefile and Kconfig entries for ARM stack unwinding This patch also makes the frame pointer default to y only if !ARM_UNWIND. LOCKDEP no longer selects FRAME_POINTER if ARM_UNWIND is enabled. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-02-12 20:56:34 +08:00
default y
help
This option enables stack unwinding support in the kernel
using the information automatically generated by the
compiler. The resulting kernel image is slightly bigger but
the performance is not affected. Currently, this feature
only works with EABI compilers. If unsure say Y.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ARM: 6314/1: ftrace: allow build without frame pointers on ARM With a new enough GCC, ARM function tracing can be supported without the need for frame pointers. This is essential for Thumb-2 support, since frame pointers aren't available then. Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-08-11 02:32:37 +08:00
config OLD_MCOUNT
bool
depends on FUNCTION_TRACER && FRAME_POINTER
default y
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
config DEBUG_USER
bool "Verbose user fault messages"
help
When a user program crashes due to an exception, the kernel can
print a brief message explaining what the problem was. This is
sometimes helpful for debugging but serves no purpose on a
production system. Most people should say N here.
In addition, you need to pass user_debug=N on the kernel command
line to enable this feature. N consists of the sum of:
1 - undefined instruction events
2 - system calls
4 - invalid data aborts
8 - SIGSEGV faults
16 - SIGBUS faults
# These options are only for real kernel hackers who want to get their hands dirty.
config DEBUG_LL
ARM: 7073/1: debug: augment DEBUG_LL Kconfig help to clarify behaviour Enabled DEBUG_LL hardcodes the UART address into the kernel and results in a non-portable kernel image. Since this option is only intended for use when debugging early boot failures, supporting multiple platforms in such a configuration is not the intended use-case. This patch documents this limitation in the DEBUG_LL Kconfig help text, so that users are aware of the portability restrictions that are associated with enabling low-level debugging support. Reported-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-02 02:04:44 +08:00
bool "Kernel low-level debugging functions (read help!)"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
depends on DEBUG_KERNEL
help
[ARM] Fix typo in arch/arm/Kconfig.debug It's called printch, not printchar Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-09 22:57:17 +08:00
Say Y here to include definitions of printascii, printch, printhex
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
in the kernel. This is helpful if you are debugging code that
executes before the console is initialized.
ARM: 7073/1: debug: augment DEBUG_LL Kconfig help to clarify behaviour Enabled DEBUG_LL hardcodes the UART address into the kernel and results in a non-portable kernel image. Since this option is only intended for use when debugging early boot failures, supporting multiple platforms in such a configuration is not the intended use-case. This patch documents this limitation in the DEBUG_LL Kconfig help text, so that users are aware of the portability restrictions that are associated with enabling low-level debugging support. Reported-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-02 02:04:44 +08:00
Note that selecting this option will limit the kernel to a single
UART definition, as specified below. Attempting to boot the kernel
image on a different platform *will not work*, so this option should
not be enabled for kernels that are intended to be portable.
ARM: 7072/1: debug: use kconfig choice for selecting DEBUG_LL UART Enabling CONFIG_DEBUG_LL (which is required for earlyprintk) hardwires the debug UART address into the kernel, so that we can print before the platform is initialised. If the user inadvertently selects multiple platforms with DEBUG_LL enabled, the UART address may not be correct and will likely cause the kernel to hang in the very early stages of boot. This patch, based on a skeleton from Russell, uses a Kconfig choice for selecting the DEBUG_LL UART, therefore allowing the user to make a choice about the supported platform when DEBUG_LL is enabled. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-02 01:58:51 +08:00
choice
prompt "Kernel low-level debugging port"
depends on DEBUG_LL
ARM: at91: make DBGU soc independent we will select now the DBGU used by the soc at Kconfig level For the DEBUG_LL and early_printk this will allow to select which DBGU to use this will also allow to select them when multiple SOC are enabled Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-02 01:43:31 +08:00
config AT91_DEBUG_LL_DBGU0
bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10 and 9rl"
depends on HAVE_AT91_DBGU0
config AT91_DEBUG_LL_DBGU1
ARM: at91: code removal of CAP9 SoC Following removal announce and addition to feature-removal-schedule.txt, here is the actual source code deletion for Atmel CAP9 family. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-01-26 21:07:09 +08:00
bool "Kernel low-level debugging on 9263 and 9g45"
ARM: at91: make DBGU soc independent we will select now the DBGU used by the soc at Kconfig level For the DEBUG_LL and early_printk this will allow to select which DBGU to use this will also allow to select them when multiple SOC are enabled Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2011-11-02 01:43:31 +08:00
depends on HAVE_AT91_DBGU1
ARM: bcm2835: convert to multi-platform This allows BCM2835 be included in a kernel build that supports multiple SoCs at once, which is useful for distro kernels. This change: * Moves bcm2835's debug-macro.S into ARM's include/debug/, and hooks it into the relevant menu. * Moves bcm2835's Kconfig into its own directory, as seems typical for multi-platform conversions. * Removes bcm2835_soc.h, and moves the content to the files where it was used; just one usage per define. * Deletes some headers and Makefile.boot that aren't needed now that we support multi-platform. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-03-12 12:40:18 +08:00
config DEBUG_BCM2835
bool "Kernel low-level debugging on BCM2835 PL011 UART"
depends on ARCH_BCM2835
ARM: 7096/1: debug: Add UART1 config choices ARM patch 7072/1 (debug: use kconfig choice for selecting DEBUG_LL UART) didn't notice that the Kconfigs relied on being unselected to configure a different serial port. Since there is no NONE option in a choice menu, explicitly add the other option so that both serial ports can be selected. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-23 03:28:35 +08:00
config DEBUG_CLPS711X_UART1
bool "Kernel low-level debugging messages via UART1"
depends on ARCH_CLPS711X
help
Say Y here if you want the debug print routines to direct
their output to the first serial port on these devices.
ARM: 7072/1: debug: use kconfig choice for selecting DEBUG_LL UART Enabling CONFIG_DEBUG_LL (which is required for earlyprintk) hardwires the debug UART address into the kernel, so that we can print before the platform is initialised. If the user inadvertently selects multiple platforms with DEBUG_LL enabled, the UART address may not be correct and will likely cause the kernel to hang in the very early stages of boot. This patch, based on a skeleton from Russell, uses a Kconfig choice for selecting the DEBUG_LL UART, therefore allowing the user to make a choice about the supported platform when DEBUG_LL is enabled. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-02 01:58:51 +08:00
config DEBUG_CLPS711X_UART2
bool "Kernel low-level debugging messages via UART2"
depends on ARCH_CLPS711X
help
Say Y here if you want the debug print routines to direct
their output to the second serial port on these devices.
ARM: cns3xxx: move debug_ll code to include/debug/ This is needed in order to keep debug_ll functionality on cns3xxx working when we enable ARCH_MULTIPLATFORM. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-14 23:02:59 +08:00
config DEBUG_CNS3XXX
bool "Kernel Kernel low-level debugging on Cavium Networks CNS3xxx"
depends on ARCH_CNS3XXX
help
Say Y here if you want the debug print routines to direct
their output to the CNS3xxx UART0.
ARM: davinci: implement DEBUG_LL port choice Apart from the necessity to do this change for multi-platform kernels the previous logic depended on the zImage decompressor to write the physical and virtual address to a magic memory location. If the decompressor is unused or not correctly configured for the current machid, the addruart macro was an infinite loop. Moreover debugging the early zImage code was not possible either. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> [nsekhar@ti.com: add braces in _DEBUG_LL_ENTRY() macro to fix checkpatch error. Fix debug port choice config dependency for traditional DaVincis. Modify debug port config names and add help text.] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2012-03-22 17:29:23 +08:00
config DEBUG_DAVINCI_DA8XX_UART1
bool "Kernel low-level debugging on DaVinci DA8XX using UART1"
depends on ARCH_DAVINCI_DA8XX
help
Say Y here if you want the debug print routines to direct
their output to UART1 serial port on DaVinci DA8XX devices.
config DEBUG_DAVINCI_DA8XX_UART2
bool "Kernel low-level debugging on DaVinci DA8XX using UART2"
depends on ARCH_DAVINCI_DA8XX
help
Say Y here if you want the debug print routines to direct
their output to UART2 serial port on DaVinci DA8XX devices.
config DEBUG_DAVINCI_DMx_UART0
bool "Kernel low-level debugging on DaVinci DMx using UART0"
depends on ARCH_DAVINCI_DMx
help
Say Y here if you want the debug print routines to direct
their output to UART0 serial port on DaVinci DMx devices.
config DEBUG_DAVINCI_TNETV107X_UART1
bool "Kernel low-level debugging on DaVinci TNETV107x using UART1"
depends on ARCH_DAVINCI_TNETV107X
help
Say Y here if you want the debug print routines to direct
their output to UART1 serial port on DaVinci TNETV107X
devices.
ARM: zynq: Allow UART1 to be used as DEBUG_LL console. The main UART on the Xilinx ZC702 board is UART1, located at address e0001000. Add a Kconfig option to select this device as the low-level debugging port. This allows the really early boot printouts to reach the USB serial adaptor on this board. For consistency's sake, add a choice entry for UART0 even though it is the the default if UART1 is not selected. Signed-off-by: Nick Bowler <nbowler@elliptictech.com> Tested-by: Josh Cartwright <josh.cartwright@ni.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
2012-11-06 05:45:49 +08:00
config DEBUG_ZYNQ_UART0
bool "Kernel low-level debugging on Xilinx Zynq using UART0"
depends on ARCH_ZYNQ
help
Say Y here if you want the debug print routines to direct
their output to UART0 on the Zynq platform.
config DEBUG_ZYNQ_UART1
bool "Kernel low-level debugging on Xilinx Zynq using UART1"
depends on ARCH_ZYNQ
help
Say Y here if you want the debug print routines to direct
their output to UART1 on the Zynq platform.
If you have a ZC702 board and want early boot messages to
appear on the USB serial adaptor, select this option.
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-24 01:44:05 +08:00
config DEBUG_DC21285_PORT
bool "Kernel low-level debugging messages via footbridge serial port"
depends on FOOTBRIDGE
help
Say Y here if you want the debug print routines to direct
their output to the serial port in the DC21285 (Footbridge).
config DEBUG_FOOTBRIDGE_COM1
bool "Kernel low-level debugging messages via footbridge 8250 at PCI COM1"
depends on FOOTBRIDGE
help
Say Y here if you want the debug print routines to direct
their output to the 8250 at PCI COM1.
ARM: add Highbank core platform support This adds basic support for the Calxeda Highbank platform. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Jamie Iles <jamie@jamieiles.com> Reviewed-by: Shawn Guo <shawn.guo@linaro.org>
2011-06-07 23:02:55 +08:00
config DEBUG_HIGHBANK_UART
bool "Kernel low-level debugging messages via Highbank UART"
depends on ARCH_HIGHBANK
help
Say Y here if you want the debug print routines to direct
their output to the UART on Highbank based devices.
arm/imx: use Kconfig choice for low-level debug UART selection Now that the DEBUG_LL UART can be selected by a Kconfig choice, simplify the #ifdefery in debug-macro.S and add entries to the top-level Kconfig.debug instead. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-19 12:56:59 +08:00
config DEBUG_IMX1_UART
bool "i.MX1 Debug UART"
depends on SOC_IMX1
help
Say Y here if you want kernel low-level debugging support
on i.MX1.
config DEBUG_IMX23_UART
bool "i.MX23 Debug UART"
depends on SOC_IMX23
help
Say Y here if you want kernel low-level debugging support
on i.MX23.
config DEBUG_IMX25_UART
bool "i.MX25 Debug UART"
depends on SOC_IMX25
help
Say Y here if you want kernel low-level debugging support
on i.MX25.
config DEBUG_IMX21_IMX27_UART
bool "i.MX21 and i.MX27 Debug UART"
depends on SOC_IMX21 || SOC_IMX27
help
Say Y here if you want kernel low-level debugging support
on i.MX21 or i.MX27.
config DEBUG_IMX28_UART
bool "i.MX28 Debug UART"
depends on SOC_IMX28
help
Say Y here if you want kernel low-level debugging support
on i.MX28.
ARM: imx: use separated debug uart symbol for imx31 and imx35 It's improper to use combined symbol DEBUG_IMX31_IMX35_UART for imx31 and imx35, because imx31 has 5 UARTs while imx35 only has 3. So later when we add UART port selection for DEBUG_IMX31_IMX35_UART, we will have problem. Use separated Kconfig options for imx31 and imx35 debug uart selection. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-12 18:54:01 +08:00
config DEBUG_IMX31_UART
bool "i.MX31 Debug UART"
depends on SOC_IMX31
arm/imx: use Kconfig choice for low-level debug UART selection Now that the DEBUG_LL UART can be selected by a Kconfig choice, simplify the #ifdefery in debug-macro.S and add entries to the top-level Kconfig.debug instead. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-19 12:56:59 +08:00
help
Say Y here if you want kernel low-level debugging support
ARM: imx: use separated debug uart symbol for imx31 and imx35 It's improper to use combined symbol DEBUG_IMX31_IMX35_UART for imx31 and imx35, because imx31 has 5 UARTs while imx35 only has 3. So later when we add UART port selection for DEBUG_IMX31_IMX35_UART, we will have problem. Use separated Kconfig options for imx31 and imx35 debug uart selection. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-12 18:54:01 +08:00
on i.MX31.
config DEBUG_IMX35_UART
bool "i.MX35 Debug UART"
depends on SOC_IMX35
help
Say Y here if you want kernel low-level debugging support
on i.MX35.
arm/imx: use Kconfig choice for low-level debug UART selection Now that the DEBUG_LL UART can be selected by a Kconfig choice, simplify the #ifdefery in debug-macro.S and add entries to the top-level Kconfig.debug instead. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-19 12:56:59 +08:00
config DEBUG_IMX51_UART
bool "i.MX51 Debug UART"
depends on SOC_IMX51
help
Say Y here if you want kernel low-level debugging support
on i.MX51.
ARM: imx: Remove mx508 support Only mx508 based board is mach-mx50_rdp and it has been marked as BROKEN for several releases. mx508 currently lacks clock support. In case someone needs to add mx508 support back, then the recommended approach is to use device tree. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-22 20:40:55 +08:00
config DEBUG_IMX53_UART
bool "i.MX53 Debug UART"
depends on SOC_IMX53
arm/imx: use Kconfig choice for low-level debug UART selection Now that the DEBUG_LL UART can be selected by a Kconfig choice, simplify the #ifdefery in debug-macro.S and add entries to the top-level Kconfig.debug instead. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-19 12:56:59 +08:00
help
Say Y here if you want kernel low-level debugging support
ARM: imx: Remove mx508 support Only mx508 based board is mach-mx50_rdp and it has been marked as BROKEN for several releases. mx508 currently lacks clock support. In case someone needs to add mx508 support back, then the recommended approach is to use device tree. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-22 20:40:55 +08:00
on i.MX53.
arm/imx: use Kconfig choice for low-level debug UART selection Now that the DEBUG_LL UART can be selected by a Kconfig choice, simplify the #ifdefery in debug-macro.S and add entries to the top-level Kconfig.debug instead. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-19 12:56:59 +08:00
ARM: imx6q: let users input debug uart port number imx6q gets 5 uart ports in total. Different board design may choose different port as debug uart. For example, imx6q-sabresd uses UART1, imx6q-sabrelite uses UART2 and imx6q-arm2 uses UART4. Rather than bloating DEBUG_LL choice list with all these uart ports, the patch introduces DEBUG_IMX6Q_UART_PORT for users to input uart port number when DEBUG_IMX6Q_UART is selected inside DEBUG_LL choice. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-10-08 13:44:29 +08:00
config DEBUG_IMX6Q_UART
bool "i.MX6Q Debug UART"
ARM: imx6: Add UART2 for low-level debug To be able to enable early debugging on boards using the UART2 for the console, add the option for early debugging on UART2. Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-04-27 16:15:45 +08:00
depends on SOC_IMX6Q
help
Say Y here if you want kernel low-level debugging support
ARM: imx6q: let users input debug uart port number imx6q gets 5 uart ports in total. Different board design may choose different port as debug uart. For example, imx6q-sabresd uses UART1, imx6q-sabrelite uses UART2 and imx6q-arm2 uses UART4. Rather than bloating DEBUG_LL choice list with all these uart ports, the patch introduces DEBUG_IMX6Q_UART_PORT for users to input uart port number when DEBUG_IMX6Q_UART is selected inside DEBUG_LL choice. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-10-08 13:44:29 +08:00
on i.MX6Q.
arm/imx6q: add core definitions and low-level debug uart It adds the core definitions and low-level debug uart support for imx6q. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2011-10-02 15:09:11 +08:00
ARM: mmp: implement DEBUG_LL port choice DEBUG_LL port must be choiced in arch-mmp. DEBUG_LL port should be UART2 in TTC DKB. And it should be UART3 in brownstone. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
2012-08-10 23:49:41 +08:00
config DEBUG_MMP_UART2
bool "Kernel low-level debugging message via MMP UART2"
depends on ARCH_MMP
help
Say Y here if you want kernel low-level debugging support
on MMP UART2.
config DEBUG_MMP_UART3
bool "Kernel low-level debugging message via MMP UART3"
depends on ARCH_MMP
help
Say Y here if you want kernel low-level debugging support
on MMP UART3.
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-24 01:44:05 +08:00
config DEBUG_MSM_UART1
bool "Kernel low-level debugging messages via MSM UART1"
depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
ARM: plat-samsung: use Kconfig choice for debug UART selection Now that the DEBUG_LL UART can be selected by a Kconfig choice, convert the Samsung UART selection to use a set of bools rather than an int. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-17 05:28:54 +08:00
help
Say Y here if you want the debug print routines to direct
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-24 01:44:05 +08:00
their output to the first serial port on MSM devices.
ARM: plat-samsung: use Kconfig choice for debug UART selection Now that the DEBUG_LL UART can be selected by a Kconfig choice, convert the Samsung UART selection to use a set of bools rather than an int. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-17 05:28:54 +08:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-24 01:44:05 +08:00
config DEBUG_MSM_UART2
bool "Kernel low-level debugging messages via MSM UART2"
depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
ARM: plat-samsung: use Kconfig choice for debug UART selection Now that the DEBUG_LL UART can be selected by a Kconfig choice, convert the Samsung UART selection to use a set of bools rather than an int. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-17 05:28:54 +08:00
help
Say Y here if you want the debug print routines to direct
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-24 01:44:05 +08:00
their output to the second serial port on MSM devices.
ARM: plat-samsung: use Kconfig choice for debug UART selection Now that the DEBUG_LL UART can be selected by a Kconfig choice, convert the Samsung UART selection to use a set of bools rather than an int. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-17 05:28:54 +08:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-24 01:44:05 +08:00
config DEBUG_MSM_UART3
bool "Kernel low-level debugging messages via MSM UART3"
depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50
help
Say Y here if you want the debug print routines to direct
their output to the third serial port on MSM devices.
ARM: plat-samsung: use Kconfig choice for debug UART selection Now that the DEBUG_LL UART can be selected by a Kconfig choice, convert the Samsung UART selection to use a set of bools rather than an int. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-17 05:28:54 +08:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-24 01:44:05 +08:00
config DEBUG_MSM8660_UART
bool "Kernel low-level debugging messages via MSM 8660 UART"
depends on ARCH_MSM8X60
select MSM_HAS_DEBUG_UART_HS
ARM: plat-samsung: use Kconfig choice for debug UART selection Now that the DEBUG_LL UART can be selected by a Kconfig choice, convert the Samsung UART selection to use a set of bools rather than an int. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-17 05:28:54 +08:00
help
Say Y here if you want the debug print routines to direct
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-24 01:44:05 +08:00
their output to the serial port on MSM 8660 devices.
ARM: plat-samsung: use Kconfig choice for debug UART selection Now that the DEBUG_LL UART can be selected by a Kconfig choice, convert the Samsung UART selection to use a set of bools rather than an int. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-17 05:28:54 +08:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-24 01:44:05 +08:00
config DEBUG_MSM8960_UART
bool "Kernel low-level debugging messages via MSM 8960 UART"
depends on ARCH_MSM8960
select MSM_HAS_DEBUG_UART_HS
help
Say Y here if you want the debug print routines to direct
their output to the serial port on MSM 8960 devices.
ARM: plat-samsung: use Kconfig choice for debug UART selection Now that the DEBUG_LL UART can be selected by a Kconfig choice, convert the Samsung UART selection to use a set of bools rather than an int. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-17 05:28:54 +08:00
ARM: mvebu: move debug macros to include/debug Move mvebu debug-macro.S over to common debug macro directory. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch>
2012-09-03 03:41:34 +08:00
config DEBUG_MVEBU_UART
bool "Kernel low-level debugging messages via MVEBU UART"
depends on ARCH_MVEBU
help
Say Y here if you want kernel low-level debugging support
on MVEBU based platforms.
ARM: nomadik: move debugmacro to debug includes This moves the Nomadik debug macro to the debug headers to make way for multiplatform support. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-28 05:39:57 +08:00
config DEBUG_NOMADIK_UART
bool "Kernel low-level debugging messages via NOMADIK UART"
depends on ARCH_NOMADIK
help
Say Y here if you want kernel low-level debugging support
on NOMADIK based platforms.
ARM: OMAP2+: Add multiplatform debug_ll support Add multiplatform debug_ll support by stripping away the custom hacks to detect the port from debug-macro.S. Note that this now requires the specific debug_ll port to be selected in the .config. The old debug-macro.S will be removed a bit later once we are sure things work properly with multiplatform enabled. Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-12 03:24:19 +08:00
config DEBUG_OMAP2PLUS_UART
bool "Kernel low-level debugging messages via OMAP2PLUS UART"
depends on ARCH_OMAP2PLUS
help
Say Y here if you want kernel low-level debugging support
on OMAP2PLUS based platforms.
ARM: picoxcell: move debug macros to include/debug Move picoxcell debug-macro.S over to common debug macro directory. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jamie Iles <jamie@jamieiles.com>
2012-09-07 03:14:46 +08:00
config DEBUG_PICOXCELL_UART
depends on ARCH_PICOXCELL
bool "Use PicoXcell UART for low-level debug"
help
Say Y here if you want kernel low-level debugging support
on PicoXcell based platforms.
ARM: realview: use Kconfig choice for debug UART selection Now that the DEBUG_LL UART can be selected by a Kconfig choice, simplify the #ifdefery in debug-macro.S and add entries to the top-level Kconfig.debug instead. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2011-08-17 05:30:28 +08:00
config DEBUG_REALVIEW_STD_PORT
bool "RealView Default UART"
depends on ARCH_REALVIEW
help
Say Y here if you want the debug print routines to direct
their output to the serial port on RealView EB, PB11MP, PBA8
and PBX platforms.
config DEBUG_REALVIEW_PB1176_PORT
bool "RealView PB1176 UART"
depends on MACH_REALVIEW_PB1176
help
Say Y here if you want the debug print routines to direct
their output to the standard serial port on the RealView
PB1176 platform.
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-24 01:44:05 +08:00
config DEBUG_S3C_UART0
depends on PLAT_SAMSUNG
ARM: exynos: move debug-macro.S to include/debug/ The move is necessary to support early debug output on exynos with multiplatform configurations. This implies also moving the plat/debug-macro.S file, but we are leaving the remaining users of that file in place, to avoid adding large numbers of extra configuration options to Kconfig.debug Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-05 01:03:10 +08:00
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-24 01:44:05 +08:00
bool "Use S3C UART 0 for low-level debug"
ARM: msm: Consolidate and move DEBUG_LL to DEBUG_LL choice Now that DEBUG_LL is a choice we can move MSM's homegrown choice menu to DEBUG_LL. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-09 02:33:03 +08:00
help
Say Y here if you want the debug print routines to direct
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-24 01:44:05 +08:00
their output to UART 0. The port must have been initialised
by the boot-loader before use.
ARM: msm: Consolidate and move DEBUG_LL to DEBUG_LL choice Now that DEBUG_LL is a choice we can move MSM's homegrown choice menu to DEBUG_LL. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-09 02:33:03 +08:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-24 01:44:05 +08:00
The uncompressor code port configuration is now handled
by CONFIG_S3C_LOWLEVEL_UART_PORT.
config DEBUG_S3C_UART1
depends on PLAT_SAMSUNG
ARM: exynos: move debug-macro.S to include/debug/ The move is necessary to support early debug output on exynos with multiplatform configurations. This implies also moving the plat/debug-macro.S file, but we are leaving the remaining users of that file in place, to avoid adding large numbers of extra configuration options to Kconfig.debug Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-05 01:03:10 +08:00
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-24 01:44:05 +08:00
bool "Use S3C UART 1 for low-level debug"
ARM: msm: Consolidate and move DEBUG_LL to DEBUG_LL choice Now that DEBUG_LL is a choice we can move MSM's homegrown choice menu to DEBUG_LL. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-09 02:33:03 +08:00
help
Say Y here if you want the debug print routines to direct
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-24 01:44:05 +08:00
their output to UART 1. The port must have been initialised
by the boot-loader before use.
ARM: msm: Consolidate and move DEBUG_LL to DEBUG_LL choice Now that DEBUG_LL is a choice we can move MSM's homegrown choice menu to DEBUG_LL. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-09 02:33:03 +08:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-24 01:44:05 +08:00
The uncompressor code port configuration is now handled
by CONFIG_S3C_LOWLEVEL_UART_PORT.
config DEBUG_S3C_UART2
depends on PLAT_SAMSUNG
ARM: exynos: move debug-macro.S to include/debug/ The move is necessary to support early debug output on exynos with multiplatform configurations. This implies also moving the plat/debug-macro.S file, but we are leaving the remaining users of that file in place, to avoid adding large numbers of extra configuration options to Kconfig.debug Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-05 01:03:10 +08:00
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-24 01:44:05 +08:00
bool "Use S3C UART 2 for low-level debug"
ARM: msm: Consolidate and move DEBUG_LL to DEBUG_LL choice Now that DEBUG_LL is a choice we can move MSM's homegrown choice menu to DEBUG_LL. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-09 02:33:03 +08:00
help
Say Y here if you want the debug print routines to direct
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-24 01:44:05 +08:00
their output to UART 2. The port must have been initialised
by the boot-loader before use.
ARM: msm: Consolidate and move DEBUG_LL to DEBUG_LL choice Now that DEBUG_LL is a choice we can move MSM's homegrown choice menu to DEBUG_LL. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-09 02:33:03 +08:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-24 01:44:05 +08:00
The uncompressor code port configuration is now handled
by CONFIG_S3C_LOWLEVEL_UART_PORT.
ARM: EXYNOS: add UART3 to DEBUG_LL ports Add support for using UART3 for DEBUG_LL on exynos. [dianders: added depend on ARCH_EXYNOS.] Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-22 13:24:04 +08:00
config DEBUG_S3C_UART3
depends on PLAT_SAMSUNG && ARCH_EXYNOS
ARM: exynos: move debug-macro.S to include/debug/ The move is necessary to support early debug output on exynos with multiplatform configurations. This implies also moving the plat/debug-macro.S file, but we are leaving the remaining users of that file in place, to avoid adding large numbers of extra configuration options to Kconfig.debug Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-05 01:03:10 +08:00
select DEBUG_EXYNOS_UART
ARM: EXYNOS: add UART3 to DEBUG_LL ports Add support for using UART3 for DEBUG_LL on exynos. [dianders: added depend on ARCH_EXYNOS.] Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-11-22 13:24:04 +08:00
bool "Use S3C UART 3 for low-level debug"
help
Say Y here if you want the debug print routines to direct
their output to UART 3. The port must have been initialised
by the boot-loader before use.
The uncompressor code port configuration is now handled
by CONFIG_S3C_LOWLEVEL_UART_PORT.
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-24 01:44:05 +08:00
ARM: socfpga: move debug macros to include/debug Move socfpga debug-macro.S over to common debug macro directory. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Dinh Nguyen <dinguyen@altera.com>
2012-09-07 03:11:28 +08:00
config DEBUG_SOCFPGA_UART
depends on ARCH_SOCFPGA
bool "Use SOCFPGA UART for low-level debug"
help
Say Y here if you want kernel low-level debugging support
on SOCFPGA based platforms.
ARM: sunxi: Add earlyprintk support for UART0 (sun4i) Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2012-11-19 19:09:41 +08:00
config DEBUG_SUNXI_UART0
bool "Kernel low-level debugging messages via sunXi UART0"
depends on ARCH_SUNXI
help
Say Y here if you want kernel low-level debugging support
on Allwinner A1X based platforms on the UART0.
ARM: sunxi: Add earlyprintk support Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Stefan Roese <sr@denx.de>
2012-11-08 19:40:49 +08:00
config DEBUG_SUNXI_UART1
bool "Kernel low-level debugging messages via sunXi UART1"
depends on ARCH_SUNXI
help
Say Y here if you want kernel low-level debugging support
on Allwinner A1X based platforms on the UART1.
ARM: tegra: move debug-macro.S to include/debug Move Tegra's debug-macro.S over to the common debug macro directory. Move Tegra's debug UART selection menu into ARM's Kconfig.debug, so that all related options are selected in the same place. Tegra's uncompress.h is left in mach-tegra/include/mach; it will be removed whenever Tegra is converted to multi-platform. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-26 05:54:56 +08:00
config DEBUG_TEGRA_UART
depends on ARCH_TEGRA
bool "Use Tegra UART for low-level debug"
help
Say Y here if you want kernel low-level debugging support
on Tegra based platforms.
ARM: PRIMA2: provide two DEBUG_LL ports for prima2 and marco prima2 and marco has different memory base, the old code will fail if we enable DEBUG_LL in marco. this patch adds two debuf port, while debugging, we select one of PRIMA2 and MARCO debug ports, in the products, we disable DEBUG_LL. Signed-off-by: Barry Song <Baohua.Song@csr.com>
2012-12-20 19:45:25 +08:00
config DEBUG_SIRFPRIMA2_UART1
bool "Kernel low-level debugging messages via SiRFprimaII UART1"
depends on ARCH_PRIMA2
help
Say Y here if you want the debug print routines to direct
their output to the uart1 port on SiRFprimaII devices.
config DEBUG_SIRFMARCO_UART1
bool "Kernel low-level debugging messages via SiRFmarco UART1"
depends on ARCH_MARCO
help
Say Y here if you want the debug print routines to direct
their output to the uart1 port on SiRFmarco devices.
ARM: ux500: move debugmacro to debug includes This moves the Ux500 debug macro to the debug headers to make way for multiplatform support. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-19 18:01:36 +08:00
config DEBUG_UX500_UART
depends on ARCH_U8500
bool "Use Ux500 UART for low-level debug"
help
Say Y here if you want kernel low-level debugging support
on Ux500 based platforms.
ARM: vexpress: Config option for early printk console Versatile Express platform can be used in different configurations, the console UART used by early printk may be located at different addresses in the address space. This patch makes it possible to select the base address of a PL011 UART to be used as a console output in the kernel configuration. The default behaviour is still the heuristic detecting memory map on Cortex-A core tiles. The zImage decompressor will use the same configuration values or print out nothing if DEBUG_LL is not enabled. Signed-off-by: Pawel Moll <pawel.moll@arm.com>
2012-07-12 00:07:25 +08:00
config DEBUG_VEXPRESS_UART0_DETECT
bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"
depends on ARCH_VEXPRESS && CPU_CP15_MMU
help
This option enables a simple heuristic which tries to determine
the motherboard's memory map variant (original or RS1) and then
choose the relevant UART0 base address.
Note that this will only work with standard A-class core tiles,
and may fail with non-standard SMM or custom software models.
config DEBUG_VEXPRESS_UART0_CA9
bool "Use PL011 UART0 at 0x10009000 (V2P-CA9 core tile)"
depends on ARCH_VEXPRESS
help
This option selects UART0 at 0x10009000. Except for custom models,
this applies only to the V2P-CA9 tile.
config DEBUG_VEXPRESS_UART0_RS1
bool "Use PL011 UART0 at 0x1c090000 (RS1 complaint tiles)"
depends on ARCH_VEXPRESS
help
This option selects UART0 at 0x1c090000. This applies to most
of the tiles using the RS1 memory map, including all new A-class
core tiles, FPGA-based SMMs and software models.
arm: vt8500: Convert debug-macro.S to be multiplatform friendly This patch moves debug-macro.S from arm/mach-vt8500/include/mach to arm/include/debug/vt8500.S to provide multiplatform support. Minor style changes in code for readability. Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
2012-12-28 07:09:18 +08:00
config DEBUG_VT8500_UART0
bool "Use UART0 on VIA/Wondermedia SoCs"
depends on ARCH_VT8500
help
This option selects UART0 on VIA/Wondermedia System-on-a-chip
devices, including VT8500, WM8505, WM8650 and WM8850.
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-24 01:44:05 +08:00
config DEBUG_LL_UART_NONE
bool "No low-level debugging UART"
ARM: initial multiplatform support This lets us build a multiplatform kernel for experimental purposes. However, it will not be useful for any real work, because it relies on a number of useful things to be disabled for now: * SMP support must be turned off because of conflicting symbols. Marc Zyngier has proposed a solution by adding a new SOC operations structure to hold indirect function pointers for these, but that work is currently stalled * We turn on SPARSE_IRQ unconditionally, which is not supported on most platforms. Each of them is currently in a different state, but most are being worked on. * A common clock framework is in place since v3.4 but not yet being used. Work on this is on its way. * DEBUG_LL for early debugging is currently disabled. * THUMB2_KERNEL does not work with allyesconfig because the kernel gets too big [Rob Herring]: Rebased to not be dependent on the mass mach header rename. As a result, omap2plus, imx, mxs and ux500 are not converted. Highbank, picoxcell, mvebu, and socfpga are converted. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Acked-by: Jamie Iles <jamie@jamieiles.com> Cc: Dinh Nguyen <dinguyen@altera.com>
2012-09-07 02:41:12 +08:00
depends on !ARCH_MULTIPLATFORM
msm: Support DEBUG_LL on MSM8660 and MSM8960 Add support for DEBUG_LL on the 8660 and 8960 development boards. While we're here cleanup the uncompress.h code a bit. Avoid the use of readl/writel as those are Linux specific APIs that aren't guaranteed to work in the decompressor. Cc: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-09 02:33:04 +08:00
help
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-24 01:44:05 +08:00
Say Y here if your platform doesn't provide a UART option
below. This relies on your platform choosing the right UART
definition internally in order for low-level debugging to
work.
msm: Support DEBUG_LL on MSM8660 and MSM8960 Add support for DEBUG_LL on the 8660 and 8960 development boards. While we're here cleanup the uncompress.h code a bit. Avoid the use of readl/writel as those are Linux specific APIs that aren't guaranteed to work in the decompressor. Cc: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-09 02:33:04 +08:00
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-24 01:44:05 +08:00
config DEBUG_ICEDCC
bool "Kernel low-level debugging via EmbeddedICE DCC channel"
msm: Support DEBUG_LL on MSM8660 and MSM8960 Add support for DEBUG_LL on the 8660 and 8960 development boards. While we're here cleanup the uncompress.h code a bit. Avoid the use of readl/writel as those are Linux specific APIs that aren't guaranteed to work in the decompressor. Cc: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-09 02:33:04 +08:00
help
Say Y here if you want the debug print routines to direct
ARM: debug: arrange Kconfig options more logically Arrange the Kconfig options in rough alphabetical order, and place the default 'none' and 'icedcc' options at the end. This prefers the platform specific debug option rather than the 'none' option, which is what we actually want. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-11-24 01:44:05 +08:00
their output to the EmbeddedICE macrocell's DCC channel using
co-processor 14. This is known to work on the ARM9 style ICE
channel and on the XScale with the PEEDI.
Note that the system will appear to hang during boot if there
is nothing connected to read from the DCC.
msm: Support DEBUG_LL on MSM8660 and MSM8960 Add support for DEBUG_LL on the 8660 and 8960 development boards. While we're here cleanup the uncompress.h code a bit. Avoid the use of readl/writel as those are Linux specific APIs that aren't guaranteed to work in the decompressor. Cc: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-09 02:33:04 +08:00
Merge branch 'devel-stable' into for-linus Conflicts: arch/arm/Kconfig.debug arch/arm/plat-versatile/Kconfig Merge fixes: arch/arm/mach-integrator/Kconfig drivers/clocksource/Kconfig
2012-03-27 18:30:31 +08:00
config DEBUG_SEMIHOSTING
ARM: 7521/1: Fix semihosting Kconfig text It seems we were missing some text in the title for the semihosting DEBUG_LL option. Add in the "/O" and fix up some minor typos in the help text. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-09-07 04:24:32 +08:00
bool "Kernel low-level debug output via semihosting I/O"
ARM: msm: Consolidate and move DEBUG_LL to DEBUG_LL choice Now that DEBUG_LL is a choice we can move MSM's homegrown choice menu to DEBUG_LL. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-09 02:33:03 +08:00
help
Merge branch 'devel-stable' into for-linus Conflicts: arch/arm/Kconfig.debug arch/arm/plat-versatile/Kconfig Merge fixes: arch/arm/mach-integrator/Kconfig drivers/clocksource/Kconfig
2012-03-27 18:30:31 +08:00
Semihosting enables code running on an ARM target to use
the I/O facilities on a host debugger/emulator through a
ARM: 7521/1: Fix semihosting Kconfig text It seems we were missing some text in the title for the semihosting DEBUG_LL option. Add in the "/O" and fix up some minor typos in the help text. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-09-07 04:24:32 +08:00
simple SVC call. The host debugger or emulator must have
Merge branch 'devel-stable' into for-linus Conflicts: arch/arm/Kconfig.debug arch/arm/plat-versatile/Kconfig Merge fixes: arch/arm/mach-integrator/Kconfig drivers/clocksource/Kconfig
2012-03-27 18:30:31 +08:00
semihosting enabled for the special svc call to be trapped
otherwise the kernel will crash.
ARM: msm: Consolidate and move DEBUG_LL to DEBUG_LL choice Now that DEBUG_LL is a choice we can move MSM's homegrown choice menu to DEBUG_LL. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-09 02:33:03 +08:00
ARM: 7521/1: Fix semihosting Kconfig text It seems we were missing some text in the title for the semihosting DEBUG_LL option. Add in the "/O" and fix up some minor typos in the help text. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-09-07 04:24:32 +08:00
This is known to work with OpenOCD, as well as
Merge branch 'devel-stable' into for-linus Conflicts: arch/arm/Kconfig.debug arch/arm/plat-versatile/Kconfig Merge fixes: arch/arm/mach-integrator/Kconfig drivers/clocksource/Kconfig
2012-03-27 18:30:31 +08:00
ARM's Fast Models, or any other controlling environment
that implements semihosting.
msm: Support DEBUG_LL on MSM8660 and MSM8960 Add support for DEBUG_LL on the 8660 and 8960 development boards. While we're here cleanup the uncompress.h code a bit. Avoid the use of readl/writel as those are Linux specific APIs that aren't guaranteed to work in the decompressor. Cc: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-09 02:33:04 +08:00
Merge branch 'devel-stable' into for-linus Conflicts: arch/arm/Kconfig.debug arch/arm/plat-versatile/Kconfig Merge fixes: arch/arm/mach-integrator/Kconfig drivers/clocksource/Kconfig
2012-03-27 18:30:31 +08:00
For more details about semihosting, please see
chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd.
msm: Support DEBUG_LL on MSM8660 and MSM8960 Add support for DEBUG_LL on the 8660 and 8960 development boards. While we're here cleanup the uncompress.h code a bit. Avoid the use of readl/writel as those are Linux specific APIs that aren't guaranteed to work in the decompressor. Cc: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-11-09 02:33:04 +08:00
ARM: 7072/1: debug: use kconfig choice for selecting DEBUG_LL UART Enabling CONFIG_DEBUG_LL (which is required for earlyprintk) hardwires the debug UART address into the kernel, so that we can print before the platform is initialised. If the user inadvertently selects multiple platforms with DEBUG_LL enabled, the UART address may not be correct and will likely cause the kernel to hang in the very early stages of boot. This patch, based on a skeleton from Russell, uses a Kconfig choice for selecting the DEBUG_LL UART, therefore allowing the user to make a choice about the supported platform when DEBUG_LL is enabled. Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-09-02 01:58:51 +08:00
endchoice
ARM: exynos: move debug-macro.S to include/debug/ The move is necessary to support early debug output on exynos with multiplatform configurations. This implies also moving the plat/debug-macro.S file, but we are leaving the remaining users of that file in place, to avoid adding large numbers of extra configuration options to Kconfig.debug Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-05 01:03:10 +08:00
config DEBUG_EXYNOS_UART
bool
ARM: imx: support DEBUG_LL uart port selection for all i.MX SoCs Extend imx6q DEBUG_LL uart port selection support to cover all i.MX SoCs. The 'range' of the Kconfig option gets dropped, as users looking at the option must know the uart number on his board. The bottom line is that the build system will report an error if an invalid port number is picked for given SoC. The header arch/arm/include/debug/imx-uart.h is created to accommodate all the uart base addresses. And the header will also be used for other low-level debug facility later. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-12 19:03:53 +08:00
config DEBUG_IMX_UART_PORT
int "i.MX Debug UART Port Selection" if DEBUG_IMX1_UART || \
DEBUG_IMX25_UART || \
DEBUG_IMX21_IMX27_UART || \
DEBUG_IMX31_UART || \
DEBUG_IMX35_UART || \
DEBUG_IMX51_UART || \
ARM: imx: fix typo "DEBUG_IMX50_IMX53_UART" Commit f8c95fe (ARM: imx: support DEBUG_LL uart port selection for all i.MX SoCs) had a typo that DEBUG_IMX50_IMX53_UART should be DEBUG_IMX53_UART. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-11 21:16:00 +08:00
DEBUG_IMX53_UART || \
ARM: imx: support DEBUG_LL uart port selection for all i.MX SoCs Extend imx6q DEBUG_LL uart port selection support to cover all i.MX SoCs. The 'range' of the Kconfig option gets dropped, as users looking at the option must know the uart number on his board. The bottom line is that the build system will report an error if an invalid port number is picked for given SoC. The header arch/arm/include/debug/imx-uart.h is created to accommodate all the uart base addresses. And the header will also be used for other low-level debug facility later. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-12 19:03:53 +08:00
DEBUG_IMX6Q_UART
ARM: imx6q: let users input debug uart port number imx6q gets 5 uart ports in total. Different board design may choose different port as debug uart. For example, imx6q-sabresd uses UART1, imx6q-sabrelite uses UART2 and imx6q-arm2 uses UART4. Rather than bloating DEBUG_LL choice list with all these uart ports, the patch introduces DEBUG_IMX6Q_UART_PORT for users to input uart port number when DEBUG_IMX6Q_UART is selected inside DEBUG_LL choice. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-10-08 13:44:29 +08:00
default 1
ARM: imx: add dependency check for DEBUG_IMX_UART_PORT While adding i.MX DEBUG_LL selection, commit f8c95fe (ARM: imx: support DEBUG_LL uart port selection for all i.MX SoCs) leaves Kconfig symbol DEBUG_IMX_UART_PORT there without any dependency check. This results in that everyone gets the symbol in their config, which is someting undesirable. Add "depends on ARCH_MXC" for the symbol to prevent that. Reported-by: Karl Beldan <karl.beldan@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-13 10:52:49 +08:00
depends on ARCH_MXC
ARM: imx6q: let users input debug uart port number imx6q gets 5 uart ports in total. Different board design may choose different port as debug uart. For example, imx6q-sabresd uses UART1, imx6q-sabrelite uses UART2 and imx6q-arm2 uses UART4. Rather than bloating DEBUG_LL choice list with all these uart ports, the patch introduces DEBUG_IMX6Q_UART_PORT for users to input uart port number when DEBUG_IMX6Q_UART is selected inside DEBUG_LL choice. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-10-08 13:44:29 +08:00
help
Choose UART port on which kernel low-level debug messages
should be output.
ARM: OMAP2+: Add multiplatform debug_ll support Add multiplatform debug_ll support by stripping away the custom hacks to detect the port from debug-macro.S. Note that this now requires the specific debug_ll port to be selected in the .config. The old debug-macro.S will be removed a bit later once we are sure things work properly with multiplatform enabled. Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-12 03:24:19 +08:00
choice
prompt "Low-level debug console UART"
depends on DEBUG_OMAP2PLUS_UART
config DEBUG_OMAP2UART1
bool "OMAP2/3/4 UART1 (omap2/3 sdp boards and some omap3 boards)"
help
This covers at least h4, 2430sdp, 3430sdp, 3630sdp,
omap3 torpedo and 3530 lv som.
config DEBUG_OMAP2UART2
bool "OMAP2/3/4 UART2"
config DEBUG_OMAP2UART3
bool "OMAP2 UART3 (n8x0)"
config DEBUG_OMAP3UART3
bool "OMAP3 UART3 (most omap3 boards)"
help
This covers at least cm_t3x, beagle, crane, devkit8000,
igep00x0, ldp, n900, n9(50), pandora, overo, touchbook,
and 3517evm.
config DEBUG_OMAP4UART3
bool "OMAP4/5 UART3 (omap4 blaze, panda, omap5 sevm)"
config DEBUG_OMAP3UART4
bool "OMAP36XX UART4"
config DEBUG_OMAP4UART4
bool "OMAP4/5 UART4"
config DEBUG_TI81XXUART1
bool "TI81XX UART1 (ti8148evm)"
config DEBUG_TI81XXUART2
bool "TI81XX UART2"
config DEBUG_TI81XXUART3
bool "TI81XX UART3 (ti8168evm)"
config DEBUG_AM33XXUART1
bool "AM33XX UART1"
config DEBUG_ZOOM_UART
bool "Zoom2/3 UART"
endchoice
ARM: tegra: move debug-macro.S to include/debug Move Tegra's debug-macro.S over to the common debug macro directory. Move Tegra's debug UART selection menu into ARM's Kconfig.debug, so that all related options are selected in the same place. Tegra's uncompress.h is left in mach-tegra/include/mach; it will be removed whenever Tegra is converted to multi-platform. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-26 05:54:56 +08:00
choice
prompt "Low-level debug console UART"
depends on DEBUG_LL && DEBUG_TEGRA_UART
config TEGRA_DEBUG_UART_AUTO_ODMDATA
bool "Via ODMDATA"
help
Automatically determines which UART to use for low-level debug based
on the ODMDATA value. This value is part of the BCT, and is written
to the boot memory device using nvflash, or other flashing tool.
When bits 19:18 are 3, then bits 17:15 indicate which UART to use;
0/1/2/3/4 are UART A/B/C/D/E.
config TEGRA_DEBUG_UARTA
bool "UART A"
config TEGRA_DEBUG_UARTB
bool "UART B"
config TEGRA_DEBUG_UARTC
bool "UART C"
config TEGRA_DEBUG_UARTD
bool "UART D"
config TEGRA_DEBUG_UARTE
bool "UART E"
endchoice
ARM: move debug macros to common location Based on suggestion by Russell King, create a common location for debug macros and select the included debug macro file using config option. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk>
2012-08-31 13:03:46 +08:00
config DEBUG_LL_INCLUDE
string
ARM: bcm2835: convert to multi-platform This allows BCM2835 be included in a kernel build that supports multiple SoCs at once, which is useful for distro kernels. This change: * Moves bcm2835's debug-macro.S into ARM's include/debug/, and hooks it into the relevant menu. * Moves bcm2835's Kconfig into its own directory, as seems typical for multi-platform conversions. * Removes bcm2835_soc.h, and moves the content to the files where it was used; just one usage per define. * Deletes some headers and Makefile.boot that aren't needed now that we support multi-platform. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-03-12 12:40:18 +08:00
default "debug/bcm2835.S" if DEBUG_BCM2835
ARM: cns3xxx: move debug_ll code to include/debug/ This is needed in order to keep debug_ll functionality on cns3xxx working when we enable ARCH_MULTIPLATFORM. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-14 23:02:59 +08:00
default "debug/cns3xxx.S" if DEBUG_CNS3XXX
ARM: exynos: move debug-macro.S to include/debug/ The move is necessary to support early debug output on exynos with multiplatform configurations. This implies also moving the plat/debug-macro.S file, but we are leaving the remaining users of that file in place, to avoid adding large numbers of extra configuration options to Kconfig.debug Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-03-05 01:03:10 +08:00
default "debug/exynos.S" if DEBUG_EXYNOS_UART
ARM: move debug macros to common location Based on suggestion by Russell King, create a common location for debug macros and select the included debug macro file using config option. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk>
2012-08-31 13:03:46 +08:00
default "debug/icedcc.S" if DEBUG_ICEDCC
ARM: imx: move debug macros to include/debug Move imx debug-macro.S over to common debug macro directory. It removes the inclusion to hardware.h by hard-coding the physical address of uart port and copying IMX_IO_P2V from hardware.h. Since we will need a common solution, which might use a fixed virtual address for uart port across platforms, we make a copy of IMX_IO_P2V here as a temporary solution to enable low-level debug for imx multi-platform build. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-09-16 20:50:45 +08:00
default "debug/imx.S" if DEBUG_IMX1_UART || \
DEBUG_IMX25_UART || \
DEBUG_IMX21_IMX27_UART || \
ARM: imx: use separated debug uart symbol for imx31 and imx35 It's improper to use combined symbol DEBUG_IMX31_IMX35_UART for imx31 and imx35, because imx31 has 5 UARTs while imx35 only has 3. So later when we add UART port selection for DEBUG_IMX31_IMX35_UART, we will have problem. Use separated Kconfig options for imx31 and imx35 debug uart selection. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-12 18:54:01 +08:00
DEBUG_IMX31_UART || \
DEBUG_IMX35_UART || \
ARM: imx: move debug macros to include/debug Move imx debug-macro.S over to common debug macro directory. It removes the inclusion to hardware.h by hard-coding the physical address of uart port and copying IMX_IO_P2V from hardware.h. Since we will need a common solution, which might use a fixed virtual address for uart port across platforms, we make a copy of IMX_IO_P2V here as a temporary solution to enable low-level debug for imx multi-platform build. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-09-16 20:50:45 +08:00
DEBUG_IMX51_UART || \
ARM: imx: Remove mx508 support Only mx508 based board is mach-mx50_rdp and it has been marked as BROKEN for several releases. mx508 currently lacks clock support. In case someone needs to add mx508 support back, then the recommended approach is to use device tree. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-22 20:40:55 +08:00
DEBUG_IMX53_UART ||\
ARM: imx6q: let users input debug uart port number imx6q gets 5 uart ports in total. Different board design may choose different port as debug uart. For example, imx6q-sabresd uses UART1, imx6q-sabrelite uses UART2 and imx6q-arm2 uses UART4. Rather than bloating DEBUG_LL choice list with all these uart ports, the patch introduces DEBUG_IMX6Q_UART_PORT for users to input uart port number when DEBUG_IMX6Q_UART is selected inside DEBUG_LL choice. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-10-08 13:44:29 +08:00
DEBUG_IMX6Q_UART
ARM: highbank: move debug macros to include/debug Move highbank debug-macro.S over to common debug macro directory. Also, remove v7 specific movw/movt instructions so this can compile under v6 mode. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
2012-08-31 13:04:22 +08:00
default "debug/highbank.S" if DEBUG_HIGHBANK_UART
ARM: mvebu: move debug macros to include/debug Move mvebu debug-macro.S over to common debug macro directory. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch>
2012-09-03 03:41:34 +08:00
default "debug/mvebu.S" if DEBUG_MVEBU_UART
ARM: mxs: rename debug-macro.S for multiplatform build Rename arch/arm/mach-mxs/include/mach/debug-macro.S to arch/arm/include/debug/mxs.S for multiplatform build. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-03-29 14:30:07 +08:00
default "debug/mxs.S" if DEBUG_IMX23_UART || DEBUG_IMX28_UART
ARM: nomadik: move debugmacro to debug includes This moves the Nomadik debug macro to the debug headers to make way for multiplatform support. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-02-28 05:39:57 +08:00
default "debug/nomadik.S" if DEBUG_NOMADIK_UART
ARM: OMAP2+: Add multiplatform debug_ll support Add multiplatform debug_ll support by stripping away the custom hacks to detect the port from debug-macro.S. Note that this now requires the specific debug_ll port to be selected in the .config. The old debug-macro.S will be removed a bit later once we are sure things work properly with multiplatform enabled. Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-12 03:24:19 +08:00
default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
ARM: picoxcell: move debug macros to include/debug Move picoxcell debug-macro.S over to common debug macro directory. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Jamie Iles <jamie@jamieiles.com>
2012-09-07 03:14:46 +08:00
default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART
ARM: sirf: move debug-macro.S to include/debug/sirf.S The new style ll_debug implementation for multiplatform requires the platform glue to be in include/debug, so let's move it there to separate the debugging logic from the platform code. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Barry Song <Baohua.Song@csr.com>
2013-03-19 20:52:14 +08:00
default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1
ARM: socfpga: move debug macros to include/debug Move socfpga debug-macro.S over to common debug macro directory. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Dinh Nguyen <dinguyen@altera.com>
2012-09-07 03:11:28 +08:00
default "debug/socfpga.S" if DEBUG_SOCFPGA_UART
ARM: sunxi: Add earlyprintk support for UART0 (sun4i) Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2012-11-19 19:09:41 +08:00
default "debug/sunxi.S" if DEBUG_SUNXI_UART0 || DEBUG_SUNXI_UART1
ARM: vexpress: move debug macros to include/debug Move vexpress debug-macro.S over to common debug macro directory. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com>
2012-08-31 13:08:21 +08:00
default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \
DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1
arm: vt8500: Convert debug-macro.S to be multiplatform friendly This patch moves debug-macro.S from arm/mach-vt8500/include/mach to arm/include/debug/vt8500.S to provide multiplatform support. Minor style changes in code for readability. Signed-off-by: Tony Prisk <linux@prisktech.co.nz>
2012-12-28 07:09:18 +08:00
default "debug/vt8500.S" if DEBUG_VT8500_UART0
ARM: tegra: move debug-macro.S to include/debug Move Tegra's debug-macro.S over to the common debug macro directory. Move Tegra's debug UART selection menu into ARM's Kconfig.debug, so that all related options are selected in the same place. Tegra's uncompress.h is left in mach-tegra/include/mach; it will be removed whenever Tegra is converted to multi-platform. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-26 05:54:56 +08:00
default "debug/tegra.S" if DEBUG_TEGRA_UART
ARM: ux500: move debugmacro to debug includes This moves the Ux500 debug macro to the debug headers to make way for multiplatform support. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-19 18:01:36 +08:00
default "debug/ux500.S" if DEBUG_UX500_UART
ARM: zynq: make use of debug_ll_io_init() Convert low-level debugging routines to make use of debug_ll_io_init(). This is part of the preparation for ARCH_MULTIPLATFORM support for Zynq. Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Tested-by: Michal Simek <michal.simek@xilinx.com>
2012-11-20 00:16:01 +08:00
default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
ARM: move debug macros to common location Based on suggestion by Russell King, create a common location for debug macros and select the included debug macro file using config option. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Cc: Russell King <linux@arm.linux.org.uk>
2012-08-31 13:03:46 +08:00
default "mach/debug-macro.S"
ARM: 7672/1: uncompress debug support for multiplatform build Instead of giving zero support of uncompress debug for multiplatform build, the patch turns uncompress debug into one part of DEBUG_LL support. When DEBUG_LL is turned on for a particular platform, uncompress debug works too for that platform. OMAP and Tegra are exceptions here. OMAP low-level debug code places data in the .data section, and that is not allowed in decompressor. And Tegra code has reference to variable that's unavailable in decompressor but only in kernel. That's why Kconfig symbol DEBUG_UNCOMPRESS controlling multiplatform uncompress debug support is defined with !DEBUG_OMAP2PLUS_UART && !DEBUG_TEGRA_UART. It creates arch/arm/boot/compressed/debug.S with CONFIG_DEBUG_LL_INCLUDE included there, implements a generic putc() using those macros, which will be built when DEBUG_UNCOMPRESS is defined. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-14 15:48:06 +08:00
config DEBUG_UNCOMPRESS
bool
default y if ARCH_MULTIPLATFORM && DEBUG_LL && \
!DEBUG_OMAP2PLUS_UART && \
!DEBUG_TEGRA_UART
ARM: 7671/1: use Kconfig to select uncompress.h Following the approach handling DEBUG_LL inclusion, the patch creates a Kconfig symbol CONFIG_UNCOMPRESS_INCLUDE for choosing the correct uncompress header. For traditional build, mach/uncompress.h will be included in arch/arm/boot/compressed/misc.c. For multiplatform build, debug/uncompress.h which contains a suite of empty functions will be used. In this way, a platform with particular uncompress.h implementation could choose its own uncompress.h with this Kconfig option. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-14 15:47:27 +08:00
config UNCOMPRESS_INCLUDE
string
default "debug/uncompress.h" if ARCH_MULTIPLATFORM
default "mach/uncompress.h"
ARM: Add an earlyprintk debug console This patch allows an earlyprintk console if CONFIG_DEBUG_LL is enabled, using the printch asm function. The patch is based on the original work by Sascha Hauer. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Pavel Machek <pavel@ucw.cz>
2009-12-09 18:02:18 +08:00
config EARLY_PRINTK
bool "Early printk"
depends on DEBUG_LL
help
Say Y here if you want to have an early console using the
kernel low-level debugging functions. Add earlyprintk to your
kernel parameters to enable this console.
ARM: 5841/1: a driver for on-chip ETM and ETB This driver implements support for on-chip Embedded Tracing Macrocell and Embedded Trace Buffer. It allows to trigger tracing of kernel execution flow and exporting trace output to userspace via character device and a sysrq combo. Trace output can then be decoded by a fairly simple open source tool [1] which is already sufficient to get the idea of what the kernel is doing. [1]: http://github.com/virtuoso/etm2human Signed-off-by: Alexander Shishkin <virtuoso@slind.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-01 21:00:51 +08:00
config OC_ETM
bool "On-chip ETM and ETB"
ARM: OC_ETM should not select ARM_AMBA The CONFIG_ARM_AMBA symbol is selected by the platforms that support AMBA, and the other platforms (e.g. orion) might not be able to build that code at all when they do not support the clk API. Instead, make sure that OC_ETM is only built on platforms that do support the amba subsystem already. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-09-07 16:02:35 +08:00
depends on ARM_AMBA
ARM: 5841/1: a driver for on-chip ETM and ETB This driver implements support for on-chip Embedded Tracing Macrocell and Embedded Trace Buffer. It allows to trigger tracing of kernel execution flow and exporting trace output to userspace via character device and a sysrq combo. Trace output can then be decoded by a fairly simple open source tool [1] which is already sufficient to get the idea of what the kernel is doing. [1]: http://github.com/virtuoso/etm2human Signed-off-by: Alexander Shishkin <virtuoso@slind.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-01 21:00:51 +08:00
help
Enables the on-chip embedded trace macrocell and embedded trace
buffer driver that will allow you to collect traces of the
kernel code.
ARM: kprobes: Add config option for selecting the ARM kprobes tests Signed-off-by: Jon Medhurst <tixy@yxit.co.uk> Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2011-08-27 19:36:58 +08:00
config ARM_KPROBES_TEST
tristate "Kprobes test module"
depends on KPROBES && MODULES
help
Perform tests of kprobes API and instruction set simulation.
ARM: 7445/1: mm: update CONTEXTIDR register to contain PID of current process This patch introduces a new Kconfig option which, when enabled, causes the kernel to write the PID of the current task into the PROCID field of the CONTEXTIDR on context switch. This is useful when analysing hardware trace, since writes to this register can be configured to emit an event into the trace stream. The thread notifier for writing the PID is deliberately kept separate from the ASID-writing code so that we can support newer processors using LPAE, where the ASID is stored in TTBR0. As such, the switch_mm code is updated to perform a read-modify-write sequence to ensure that we don't clobber the PID on CPUs using the classic 2-level page tables. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-06 22:43:03 +08:00
config PID_IN_CONTEXTIDR
bool "Write the current PID to the CONTEXTIDR register"
depends on CPU_COPY_V6
help
Enabling this option causes the kernel to write the current PID to
the PROCID field of the CONTEXTIDR register, at the expense of some
additional instructions during context switch. Say Y here only if you
are planning to use hardware trace tools with this kernel.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
endmenu