OpenCloudOS-Kernel/fs/xfs/xfs_log_format.h

857 lines
30 KiB
C
Raw Normal View History

/*
* Copyright (c) 2000-2003,2005 Silicon Graphics, Inc.
* All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it would be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write the Free Software Foundation,
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef __XFS_LOG_FORMAT_H__
#define __XFS_LOG_FORMAT_H__
struct xfs_mount;
struct xfs_trans_res;
/*
* On-disk Log Format definitions.
*
* This file contains all the on-disk format definitions used within the log. It
* includes the physical log structure itself, as well as all the log item
* format structures that are written into the log and intepreted by log
* recovery. We start with the physical log format definitions, and then work
* through all the log items definitions and everything they encode into the
* log.
*/
typedef __uint32_t xlog_tid_t;
#define XLOG_MIN_ICLOGS 2
#define XLOG_MAX_ICLOGS 8
#define XLOG_HEADER_MAGIC_NUM 0xFEEDbabe /* Invalid cycle number */
#define XLOG_VERSION_1 1
#define XLOG_VERSION_2 2 /* Large IClogs, Log sunit */
#define XLOG_VERSION_OKBITS (XLOG_VERSION_1 | XLOG_VERSION_2)
#define XLOG_MIN_RECORD_BSIZE (16*1024) /* eventually 32k */
#define XLOG_BIG_RECORD_BSIZE (32*1024) /* 32k buffers */
#define XLOG_MAX_RECORD_BSIZE (256*1024)
#define XLOG_HEADER_CYCLE_SIZE (32*1024) /* cycle data in header */
#define XLOG_MIN_RECORD_BSHIFT 14 /* 16384 == 1 << 14 */
#define XLOG_BIG_RECORD_BSHIFT 15 /* 32k == 1 << 15 */
#define XLOG_MAX_RECORD_BSHIFT 18 /* 256k == 1 << 18 */
#define XLOG_BTOLSUNIT(log, b) (((b)+(log)->l_mp->m_sb.sb_logsunit-1) / \
(log)->l_mp->m_sb.sb_logsunit)
#define XLOG_LSUNITTOB(log, su) ((su) * (log)->l_mp->m_sb.sb_logsunit)
#define XLOG_HEADER_SIZE 512
/* Minimum number of transactions that must fit in the log (defined by mkfs) */
#define XFS_MIN_LOG_FACTOR 3
#define XLOG_REC_SHIFT(log) \
BTOBB(1 << (xfs_sb_version_haslogv2(&log->l_mp->m_sb) ? \
XLOG_MAX_RECORD_BSHIFT : XLOG_BIG_RECORD_BSHIFT))
#define XLOG_TOTAL_REC_SHIFT(log) \
BTOBB(XLOG_MAX_ICLOGS << (xfs_sb_version_haslogv2(&log->l_mp->m_sb) ? \
XLOG_MAX_RECORD_BSHIFT : XLOG_BIG_RECORD_BSHIFT))
/* get lsn fields */
#define CYCLE_LSN(lsn) ((uint)((lsn)>>32))
#define BLOCK_LSN(lsn) ((uint)(lsn))
/* this is used in a spot where we might otherwise double-endian-flip */
#define CYCLE_LSN_DISK(lsn) (((__be32 *)&(lsn))[0])
static inline xfs_lsn_t xlog_assign_lsn(uint cycle, uint block)
{
return ((xfs_lsn_t)cycle << 32) | block;
}
static inline uint xlog_get_cycle(char *ptr)
{
if (be32_to_cpu(*(__be32 *)ptr) == XLOG_HEADER_MAGIC_NUM)
return be32_to_cpu(*((__be32 *)ptr + 1));
else
return be32_to_cpu(*(__be32 *)ptr);
}
/* Log Clients */
#define XFS_TRANSACTION 0x69
#define XFS_VOLUME 0x2
#define XFS_LOG 0xaa
#define XLOG_UNMOUNT_TYPE 0x556e /* Un for Unmount */
/* Region types for iovec's i_type */
#define XLOG_REG_TYPE_BFORMAT 1
#define XLOG_REG_TYPE_BCHUNK 2
#define XLOG_REG_TYPE_EFI_FORMAT 3
#define XLOG_REG_TYPE_EFD_FORMAT 4
#define XLOG_REG_TYPE_IFORMAT 5
#define XLOG_REG_TYPE_ICORE 6
#define XLOG_REG_TYPE_IEXT 7
#define XLOG_REG_TYPE_IBROOT 8
#define XLOG_REG_TYPE_ILOCAL 9
#define XLOG_REG_TYPE_IATTR_EXT 10
#define XLOG_REG_TYPE_IATTR_BROOT 11
#define XLOG_REG_TYPE_IATTR_LOCAL 12
#define XLOG_REG_TYPE_QFORMAT 13
#define XLOG_REG_TYPE_DQUOT 14
#define XLOG_REG_TYPE_QUOTAOFF 15
#define XLOG_REG_TYPE_LRHEADER 16
#define XLOG_REG_TYPE_UNMOUNT 17
#define XLOG_REG_TYPE_COMMIT 18
#define XLOG_REG_TYPE_TRANSHDR 19
#define XLOG_REG_TYPE_ICREATE 20
#define XLOG_REG_TYPE_MAX 20
/*
* Flags to log operation header
*
* The first write of a new transaction will be preceded with a start
* record, XLOG_START_TRANS. Once a transaction is committed, a commit
* record is written, XLOG_COMMIT_TRANS. If a single region can not fit into
* the remainder of the current active in-core log, it is split up into
* multiple regions. Each partial region will be marked with a
* XLOG_CONTINUE_TRANS until the last one, which gets marked with XLOG_END_TRANS.
*
*/
#define XLOG_START_TRANS 0x01 /* Start a new transaction */
#define XLOG_COMMIT_TRANS 0x02 /* Commit this transaction */
#define XLOG_CONTINUE_TRANS 0x04 /* Cont this trans into new region */
#define XLOG_WAS_CONT_TRANS 0x08 /* Cont this trans into new region */
#define XLOG_END_TRANS 0x10 /* End a continued transaction */
#define XLOG_UNMOUNT_TRANS 0x20 /* Unmount a filesystem transaction */
typedef struct xlog_op_header {
__be32 oh_tid; /* transaction id of operation : 4 b */
__be32 oh_len; /* bytes in data region : 4 b */
__u8 oh_clientid; /* who sent me this : 1 b */
__u8 oh_flags; /* : 1 b */
__u16 oh_res2; /* 32 bit align : 2 b */
} xlog_op_header_t;
/* valid values for h_fmt */
#define XLOG_FMT_UNKNOWN 0
#define XLOG_FMT_LINUX_LE 1
#define XLOG_FMT_LINUX_BE 2
#define XLOG_FMT_IRIX_BE 3
/* our fmt */
#ifdef XFS_NATIVE_HOST
#define XLOG_FMT XLOG_FMT_LINUX_BE
#else
#define XLOG_FMT XLOG_FMT_LINUX_LE
#endif
typedef struct xlog_rec_header {
__be32 h_magicno; /* log record (LR) identifier : 4 */
__be32 h_cycle; /* write cycle of log : 4 */
__be32 h_version; /* LR version : 4 */
__be32 h_len; /* len in bytes; should be 64-bit aligned: 4 */
__be64 h_lsn; /* lsn of this LR : 8 */
__be64 h_tail_lsn; /* lsn of 1st LR w/ buffers not committed: 8 */
__le32 h_crc; /* crc of log record : 4 */
__be32 h_prev_block; /* block number to previous LR : 4 */
__be32 h_num_logops; /* number of log operations in this LR : 4 */
__be32 h_cycle_data[XLOG_HEADER_CYCLE_SIZE / BBSIZE];
/* new fields */
__be32 h_fmt; /* format of log record : 4 */
uuid_t h_fs_uuid; /* uuid of FS : 16 */
__be32 h_size; /* iclog size : 4 */
} xlog_rec_header_t;
typedef struct xlog_rec_ext_header {
__be32 xh_cycle; /* write cycle of log : 4 */
__be32 xh_cycle_data[XLOG_HEADER_CYCLE_SIZE / BBSIZE]; /* : 256 */
} xlog_rec_ext_header_t;
/*
* Quite misnamed, because this union lays out the actual on-disk log buffer.
*/
typedef union xlog_in_core2 {
xlog_rec_header_t hic_header;
xlog_rec_ext_header_t hic_xheader;
char hic_sector[XLOG_HEADER_SIZE];
} xlog_in_core_2_t;
/* not an on-disk structure, but needed by log recovery in userspace */
typedef struct xfs_log_iovec {
void *i_addr; /* beginning address of region */
int i_len; /* length in bytes of region */
uint i_type; /* type of region */
} xfs_log_iovec_t;
/*
* Transaction Header definitions.
*
* This is the structure written in the log at the head of every transaction. It
* identifies the type and id of the transaction, and contains the number of
* items logged by the transaction so we know how many to expect during
* recovery.
*
* Do not change the below structure without redoing the code in
* xlog_recover_add_to_trans() and xlog_recover_add_to_cont_trans().
*/
typedef struct xfs_trans_header {
uint th_magic; /* magic number */
uint th_type; /* transaction type */
__int32_t th_tid; /* transaction id (unused) */
uint th_num_items; /* num items logged by trans */
} xfs_trans_header_t;
#define XFS_TRANS_HEADER_MAGIC 0x5452414e /* TRAN */
/*
* Log item types.
*/
#define XFS_LI_EFI 0x1236
#define XFS_LI_EFD 0x1237
#define XFS_LI_IUNLINK 0x1238
#define XFS_LI_INODE 0x123b /* aligned ino chunks, var-size ibufs */
#define XFS_LI_BUF 0x123c /* v2 bufs, variable sized inode bufs */
#define XFS_LI_DQUOT 0x123d
#define XFS_LI_QUOTAOFF 0x123e
#define XFS_LI_ICREATE 0x123f
#define XFS_LI_TYPE_DESC \
{ XFS_LI_EFI, "XFS_LI_EFI" }, \
{ XFS_LI_EFD, "XFS_LI_EFD" }, \
{ XFS_LI_IUNLINK, "XFS_LI_IUNLINK" }, \
{ XFS_LI_INODE, "XFS_LI_INODE" }, \
{ XFS_LI_BUF, "XFS_LI_BUF" }, \
{ XFS_LI_DQUOT, "XFS_LI_DQUOT" }, \
{ XFS_LI_QUOTAOFF, "XFS_LI_QUOTAOFF" }, \
{ XFS_LI_ICREATE, "XFS_LI_ICREATE" }
/*
* Transaction types. Used to distinguish types of buffers.
*/
#define XFS_TRANS_SETATTR_NOT_SIZE 1
#define XFS_TRANS_SETATTR_SIZE 2
#define XFS_TRANS_INACTIVE 3
#define XFS_TRANS_CREATE 4
#define XFS_TRANS_CREATE_TRUNC 5
#define XFS_TRANS_TRUNCATE_FILE 6
#define XFS_TRANS_REMOVE 7
#define XFS_TRANS_LINK 8
#define XFS_TRANS_RENAME 9
#define XFS_TRANS_MKDIR 10
#define XFS_TRANS_RMDIR 11
#define XFS_TRANS_SYMLINK 12
#define XFS_TRANS_SET_DMATTRS 13
#define XFS_TRANS_GROWFS 14
#define XFS_TRANS_STRAT_WRITE 15
#define XFS_TRANS_DIOSTRAT 16
/* 17 was XFS_TRANS_WRITE_SYNC */
#define XFS_TRANS_WRITEID 18
#define XFS_TRANS_ADDAFORK 19
#define XFS_TRANS_ATTRINVAL 20
#define XFS_TRANS_ATRUNCATE 21
#define XFS_TRANS_ATTR_SET 22
#define XFS_TRANS_ATTR_RM 23
#define XFS_TRANS_ATTR_FLAG 24
#define XFS_TRANS_CLEAR_AGI_BUCKET 25
#define XFS_TRANS_QM_SBCHANGE 26
/*
* Dummy entries since we use the transaction type to index into the
* trans_type[] in xlog_recover_print_trans_head()
*/
#define XFS_TRANS_DUMMY1 27
#define XFS_TRANS_DUMMY2 28
#define XFS_TRANS_QM_QUOTAOFF 29
#define XFS_TRANS_QM_DQALLOC 30
#define XFS_TRANS_QM_SETQLIM 31
#define XFS_TRANS_QM_DQCLUSTER 32
#define XFS_TRANS_QM_QINOCREATE 33
#define XFS_TRANS_QM_QUOTAOFF_END 34
#define XFS_TRANS_SB_UNIT 35
#define XFS_TRANS_FSYNC_TS 36
#define XFS_TRANS_GROWFSRT_ALLOC 37
#define XFS_TRANS_GROWFSRT_ZERO 38
#define XFS_TRANS_GROWFSRT_FREE 39
#define XFS_TRANS_SWAPEXT 40
#define XFS_TRANS_SB_COUNT 41
#define XFS_TRANS_CHECKPOINT 42
#define XFS_TRANS_ICREATE 43
#define XFS_TRANS_TYPE_MAX 43
/* new transaction types need to be reflected in xfs_logprint(8) */
#define XFS_TRANS_TYPES \
{ XFS_TRANS_SETATTR_NOT_SIZE, "SETATTR_NOT_SIZE" }, \
{ XFS_TRANS_SETATTR_SIZE, "SETATTR_SIZE" }, \
{ XFS_TRANS_INACTIVE, "INACTIVE" }, \
{ XFS_TRANS_CREATE, "CREATE" }, \
{ XFS_TRANS_CREATE_TRUNC, "CREATE_TRUNC" }, \
{ XFS_TRANS_TRUNCATE_FILE, "TRUNCATE_FILE" }, \
{ XFS_TRANS_REMOVE, "REMOVE" }, \
{ XFS_TRANS_LINK, "LINK" }, \
{ XFS_TRANS_RENAME, "RENAME" }, \
{ XFS_TRANS_MKDIR, "MKDIR" }, \
{ XFS_TRANS_RMDIR, "RMDIR" }, \
{ XFS_TRANS_SYMLINK, "SYMLINK" }, \
{ XFS_TRANS_SET_DMATTRS, "SET_DMATTRS" }, \
{ XFS_TRANS_GROWFS, "GROWFS" }, \
{ XFS_TRANS_STRAT_WRITE, "STRAT_WRITE" }, \
{ XFS_TRANS_DIOSTRAT, "DIOSTRAT" }, \
{ XFS_TRANS_WRITEID, "WRITEID" }, \
{ XFS_TRANS_ADDAFORK, "ADDAFORK" }, \
{ XFS_TRANS_ATTRINVAL, "ATTRINVAL" }, \
{ XFS_TRANS_ATRUNCATE, "ATRUNCATE" }, \
{ XFS_TRANS_ATTR_SET, "ATTR_SET" }, \
{ XFS_TRANS_ATTR_RM, "ATTR_RM" }, \
{ XFS_TRANS_ATTR_FLAG, "ATTR_FLAG" }, \
{ XFS_TRANS_CLEAR_AGI_BUCKET, "CLEAR_AGI_BUCKET" }, \
{ XFS_TRANS_QM_SBCHANGE, "QM_SBCHANGE" }, \
{ XFS_TRANS_QM_QUOTAOFF, "QM_QUOTAOFF" }, \
{ XFS_TRANS_QM_DQALLOC, "QM_DQALLOC" }, \
{ XFS_TRANS_QM_SETQLIM, "QM_SETQLIM" }, \
{ XFS_TRANS_QM_DQCLUSTER, "QM_DQCLUSTER" }, \
{ XFS_TRANS_QM_QINOCREATE, "QM_QINOCREATE" }, \
{ XFS_TRANS_QM_QUOTAOFF_END, "QM_QOFF_END" }, \
{ XFS_TRANS_SB_UNIT, "SB_UNIT" }, \
{ XFS_TRANS_FSYNC_TS, "FSYNC_TS" }, \
{ XFS_TRANS_GROWFSRT_ALLOC, "GROWFSRT_ALLOC" }, \
{ XFS_TRANS_GROWFSRT_ZERO, "GROWFSRT_ZERO" }, \
{ XFS_TRANS_GROWFSRT_FREE, "GROWFSRT_FREE" }, \
{ XFS_TRANS_SWAPEXT, "SWAPEXT" }, \
{ XFS_TRANS_SB_COUNT, "SB_COUNT" }, \
{ XFS_TRANS_CHECKPOINT, "CHECKPOINT" }, \
{ XFS_TRANS_DUMMY1, "DUMMY1" }, \
{ XFS_TRANS_DUMMY2, "DUMMY2" }, \
{ XLOG_UNMOUNT_REC_TYPE, "UNMOUNT" }
/*
* This structure is used to track log items associated with
* a transaction. It points to the log item and keeps some
* flags to track the state of the log item. It also tracks
* the amount of space needed to log the item it describes
* once we get to commit processing (see xfs_trans_commit()).
*/
struct xfs_log_item_desc {
struct xfs_log_item *lid_item;
struct list_head lid_trans;
unsigned char lid_flags;
};
#define XFS_LID_DIRTY 0x1
/*
* Values for t_flags.
*/
#define XFS_TRANS_DIRTY 0x01 /* something needs to be logged */
#define XFS_TRANS_SB_DIRTY 0x02 /* superblock is modified */
#define XFS_TRANS_PERM_LOG_RES 0x04 /* xact took a permanent log res */
#define XFS_TRANS_SYNC 0x08 /* make commit synchronous */
#define XFS_TRANS_DQ_DIRTY 0x10 /* at least one dquot in trx dirty */
#define XFS_TRANS_RESERVE 0x20 /* OK to use reserved data blocks */
#define XFS_TRANS_FREEZE_PROT 0x40 /* Transaction has elevated writer
count in superblock */
/*
* Values for call flags parameter.
*/
#define XFS_TRANS_RELEASE_LOG_RES 0x4
#define XFS_TRANS_ABORT 0x8
/*
* Field values for xfs_trans_mod_sb.
*/
#define XFS_TRANS_SB_ICOUNT 0x00000001
#define XFS_TRANS_SB_IFREE 0x00000002
#define XFS_TRANS_SB_FDBLOCKS 0x00000004
#define XFS_TRANS_SB_RES_FDBLOCKS 0x00000008
#define XFS_TRANS_SB_FREXTENTS 0x00000010
#define XFS_TRANS_SB_RES_FREXTENTS 0x00000020
#define XFS_TRANS_SB_DBLOCKS 0x00000040
#define XFS_TRANS_SB_AGCOUNT 0x00000080
#define XFS_TRANS_SB_IMAXPCT 0x00000100
#define XFS_TRANS_SB_REXTSIZE 0x00000200
#define XFS_TRANS_SB_RBMBLOCKS 0x00000400
#define XFS_TRANS_SB_RBLOCKS 0x00000800
#define XFS_TRANS_SB_REXTENTS 0x00001000
#define XFS_TRANS_SB_REXTSLOG 0x00002000
/*
* Here we centralize the specification of XFS meta-data buffer
* reference count values. This determine how hard the buffer
* cache tries to hold onto the buffer.
*/
#define XFS_AGF_REF 4
#define XFS_AGI_REF 4
#define XFS_AGFL_REF 3
#define XFS_INO_BTREE_REF 3
#define XFS_ALLOC_BTREE_REF 2
#define XFS_BMAP_BTREE_REF 2
#define XFS_DIR_BTREE_REF 2
#define XFS_INO_REF 2
#define XFS_ATTR_BTREE_REF 1
#define XFS_DQUOT_REF 1
/*
* Flags for xfs_trans_ichgtime().
*/
#define XFS_ICHGTIME_MOD 0x1 /* data fork modification timestamp */
#define XFS_ICHGTIME_CHG 0x2 /* inode field change timestamp */
#define XFS_ICHGTIME_CREATE 0x4 /* inode create timestamp */
/*
* Inode Log Item Format definitions.
*
* This is the structure used to lay out an inode log item in the
* log. The size of the inline data/extents/b-tree root to be logged
* (if any) is indicated in the ilf_dsize field. Changes to this structure
* must be added on to the end.
*/
typedef struct xfs_inode_log_format {
__uint16_t ilf_type; /* inode log item type */
__uint16_t ilf_size; /* size of this item */
__uint32_t ilf_fields; /* flags for fields logged */
__uint16_t ilf_asize; /* size of attr d/ext/root */
__uint16_t ilf_dsize; /* size of data/ext/root */
__uint64_t ilf_ino; /* inode number */
union {
__uint32_t ilfu_rdev; /* rdev value for dev inode*/
uuid_t ilfu_uuid; /* mount point value */
} ilf_u;
__int64_t ilf_blkno; /* blkno of inode buffer */
__int32_t ilf_len; /* len of inode buffer */
__int32_t ilf_boffset; /* off of inode in buffer */
} xfs_inode_log_format_t;
typedef struct xfs_inode_log_format_32 {
__uint16_t ilf_type; /* inode log item type */
__uint16_t ilf_size; /* size of this item */
__uint32_t ilf_fields; /* flags for fields logged */
__uint16_t ilf_asize; /* size of attr d/ext/root */
__uint16_t ilf_dsize; /* size of data/ext/root */
__uint64_t ilf_ino; /* inode number */
union {
__uint32_t ilfu_rdev; /* rdev value for dev inode*/
uuid_t ilfu_uuid; /* mount point value */
} ilf_u;
__int64_t ilf_blkno; /* blkno of inode buffer */
__int32_t ilf_len; /* len of inode buffer */
__int32_t ilf_boffset; /* off of inode in buffer */
} __attribute__((packed)) xfs_inode_log_format_32_t;
typedef struct xfs_inode_log_format_64 {
__uint16_t ilf_type; /* inode log item type */
__uint16_t ilf_size; /* size of this item */
__uint32_t ilf_fields; /* flags for fields logged */
__uint16_t ilf_asize; /* size of attr d/ext/root */
__uint16_t ilf_dsize; /* size of data/ext/root */
__uint32_t ilf_pad; /* pad for 64 bit boundary */
__uint64_t ilf_ino; /* inode number */
union {
__uint32_t ilfu_rdev; /* rdev value for dev inode*/
uuid_t ilfu_uuid; /* mount point value */
} ilf_u;
__int64_t ilf_blkno; /* blkno of inode buffer */
__int32_t ilf_len; /* len of inode buffer */
__int32_t ilf_boffset; /* off of inode in buffer */
} xfs_inode_log_format_64_t;
/*
* Flags for xfs_trans_log_inode flags field.
*/
#define XFS_ILOG_CORE 0x001 /* log standard inode fields */
#define XFS_ILOG_DDATA 0x002 /* log i_df.if_data */
#define XFS_ILOG_DEXT 0x004 /* log i_df.if_extents */
#define XFS_ILOG_DBROOT 0x008 /* log i_df.i_broot */
#define XFS_ILOG_DEV 0x010 /* log the dev field */
#define XFS_ILOG_UUID 0x020 /* log the uuid field */
#define XFS_ILOG_ADATA 0x040 /* log i_af.if_data */
#define XFS_ILOG_AEXT 0x080 /* log i_af.if_extents */
#define XFS_ILOG_ABROOT 0x100 /* log i_af.i_broot */
xfs: recovery of swap extents operations for CRC filesystems This is the recovery side of the btree block owner change operation performed by swapext on CRC enabled filesystems. We detect that an owner change is needed by the flag that has been placed on the inode log format flag field. Because the inode recovery is being replayed after the buffers that make up the BMBT in the given checkpoint, we can walk all the buffers and directly modify them when we see the flag set on an inode. Because the inode can be relogged and hence present in multiple chekpoints with the "change owner" flag set, we could do multiple passes across the inode to do this change. While this isn't optimal, we can't directly ignore the flag as there may be multiple independent swap extent operations being replayed on the same inode in different checkpoints so we can't ignore them. Further, because the owner change operation uses ordered buffers, we might have buffers that are newer on disk than the current checkpoint and so already have the owner changed in them. Hence we cannot just peek at a buffer in the tree and check that it has the correct owner and assume that the change was completed. So, for the moment just brute force the owner change every time we see an inode with the flag set. Note that we have to be careful here because the owner of the buffers may point to either the old owner or the new owner. Currently the verifier can't verify the owner directly, so there is no failure case here right now. If we verify the owner exactly in future, then we'll have to take this into account. This was tested in terms of normal operation via xfstests - all of the fsr tests now pass without failure. however, we really need to modify xfs/227 to stress v3 inodes correctly to ensure we fully cover this case for v5 filesystems. In terms of recovery testing, I used a hacked version of xfs_fsr that held the temp inode open for a few seconds before exiting so that the filesystem could be shut down with an open owner change recovery flags set on at least the temp inode. fsr leaves the temp inode unlinked and in btree format, so this was necessary for the owner change to be reliably replayed. logprint confirmed the tmp inode in the log had the correct flag set: INO: cnt:3 total:3 a:0x69e9e0 len:56 a:0x69ea20 len:176 a:0x69eae0 len:88 INODE: #regs:3 ino:0x44 flags:0x209 dsize:88 ^^^^^ 0x200 is set, indicating a data fork owner change needed to be replayed on inode 0x44. A printk in the revoery code confirmed that the inode change was recovered: XFS (vdc): Mounting Filesystem XFS (vdc): Starting recovery (logdev: internal) recovering owner change ino 0x44 XFS (vdc): Version 5 superblock detected. This kernel L support enabled! Use of these features in this kernel is at your own risk! XFS (vdc): Ending recovery (logdev: internal) The script used to test this was: $ cat ./recovery-fsr.sh #!/bin/bash dev=/dev/vdc mntpt=/mnt/scratch testfile=$mntpt/testfile umount $mntpt mkfs.xfs -f -m crc=1 $dev mount $dev $mntpt chmod 777 $mntpt for i in `seq 10000 -1 0`; do xfs_io -f -d -c "pwrite $(($i * 4096)) 4096" $testfile > /dev/null 2>&1 done xfs_bmap -vp $testfile |head -20 xfs_fsr -d -v $testfile & sleep 10 /home/dave/src/xfstests-dev/src/godown -f $mntpt wait umount $mntpt xfs_logprint -t $dev |tail -20 time mount $dev $mntpt xfs_bmap -vp $testfile umount $mntpt $ Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-30 08:23:45 +08:00
#define XFS_ILOG_DOWNER 0x200 /* change the data fork owner on replay */
#define XFS_ILOG_AOWNER 0x400 /* change the attr fork owner on replay */
/*
* The timestamps are dirty, but not necessarily anything else in the inode
* core. Unlike the other fields above this one must never make it to disk
* in the ilf_fields of the inode_log_format, but is purely store in-memory in
* ili_fields in the inode_log_item.
*/
#define XFS_ILOG_TIMESTAMP 0x4000
#define XFS_ILOG_NONCORE (XFS_ILOG_DDATA | XFS_ILOG_DEXT | \
XFS_ILOG_DBROOT | XFS_ILOG_DEV | \
XFS_ILOG_UUID | XFS_ILOG_ADATA | \
xfs: recovery of swap extents operations for CRC filesystems This is the recovery side of the btree block owner change operation performed by swapext on CRC enabled filesystems. We detect that an owner change is needed by the flag that has been placed on the inode log format flag field. Because the inode recovery is being replayed after the buffers that make up the BMBT in the given checkpoint, we can walk all the buffers and directly modify them when we see the flag set on an inode. Because the inode can be relogged and hence present in multiple chekpoints with the "change owner" flag set, we could do multiple passes across the inode to do this change. While this isn't optimal, we can't directly ignore the flag as there may be multiple independent swap extent operations being replayed on the same inode in different checkpoints so we can't ignore them. Further, because the owner change operation uses ordered buffers, we might have buffers that are newer on disk than the current checkpoint and so already have the owner changed in them. Hence we cannot just peek at a buffer in the tree and check that it has the correct owner and assume that the change was completed. So, for the moment just brute force the owner change every time we see an inode with the flag set. Note that we have to be careful here because the owner of the buffers may point to either the old owner or the new owner. Currently the verifier can't verify the owner directly, so there is no failure case here right now. If we verify the owner exactly in future, then we'll have to take this into account. This was tested in terms of normal operation via xfstests - all of the fsr tests now pass without failure. however, we really need to modify xfs/227 to stress v3 inodes correctly to ensure we fully cover this case for v5 filesystems. In terms of recovery testing, I used a hacked version of xfs_fsr that held the temp inode open for a few seconds before exiting so that the filesystem could be shut down with an open owner change recovery flags set on at least the temp inode. fsr leaves the temp inode unlinked and in btree format, so this was necessary for the owner change to be reliably replayed. logprint confirmed the tmp inode in the log had the correct flag set: INO: cnt:3 total:3 a:0x69e9e0 len:56 a:0x69ea20 len:176 a:0x69eae0 len:88 INODE: #regs:3 ino:0x44 flags:0x209 dsize:88 ^^^^^ 0x200 is set, indicating a data fork owner change needed to be replayed on inode 0x44. A printk in the revoery code confirmed that the inode change was recovered: XFS (vdc): Mounting Filesystem XFS (vdc): Starting recovery (logdev: internal) recovering owner change ino 0x44 XFS (vdc): Version 5 superblock detected. This kernel L support enabled! Use of these features in this kernel is at your own risk! XFS (vdc): Ending recovery (logdev: internal) The script used to test this was: $ cat ./recovery-fsr.sh #!/bin/bash dev=/dev/vdc mntpt=/mnt/scratch testfile=$mntpt/testfile umount $mntpt mkfs.xfs -f -m crc=1 $dev mount $dev $mntpt chmod 777 $mntpt for i in `seq 10000 -1 0`; do xfs_io -f -d -c "pwrite $(($i * 4096)) 4096" $testfile > /dev/null 2>&1 done xfs_bmap -vp $testfile |head -20 xfs_fsr -d -v $testfile & sleep 10 /home/dave/src/xfstests-dev/src/godown -f $mntpt wait umount $mntpt xfs_logprint -t $dev |tail -20 time mount $dev $mntpt xfs_bmap -vp $testfile umount $mntpt $ Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-30 08:23:45 +08:00
XFS_ILOG_AEXT | XFS_ILOG_ABROOT | \
XFS_ILOG_DOWNER | XFS_ILOG_AOWNER)
#define XFS_ILOG_DFORK (XFS_ILOG_DDATA | XFS_ILOG_DEXT | \
XFS_ILOG_DBROOT)
#define XFS_ILOG_AFORK (XFS_ILOG_ADATA | XFS_ILOG_AEXT | \
XFS_ILOG_ABROOT)
#define XFS_ILOG_ALL (XFS_ILOG_CORE | XFS_ILOG_DDATA | \
XFS_ILOG_DEXT | XFS_ILOG_DBROOT | \
XFS_ILOG_DEV | XFS_ILOG_UUID | \
XFS_ILOG_ADATA | XFS_ILOG_AEXT | \
xfs: recovery of swap extents operations for CRC filesystems This is the recovery side of the btree block owner change operation performed by swapext on CRC enabled filesystems. We detect that an owner change is needed by the flag that has been placed on the inode log format flag field. Because the inode recovery is being replayed after the buffers that make up the BMBT in the given checkpoint, we can walk all the buffers and directly modify them when we see the flag set on an inode. Because the inode can be relogged and hence present in multiple chekpoints with the "change owner" flag set, we could do multiple passes across the inode to do this change. While this isn't optimal, we can't directly ignore the flag as there may be multiple independent swap extent operations being replayed on the same inode in different checkpoints so we can't ignore them. Further, because the owner change operation uses ordered buffers, we might have buffers that are newer on disk than the current checkpoint and so already have the owner changed in them. Hence we cannot just peek at a buffer in the tree and check that it has the correct owner and assume that the change was completed. So, for the moment just brute force the owner change every time we see an inode with the flag set. Note that we have to be careful here because the owner of the buffers may point to either the old owner or the new owner. Currently the verifier can't verify the owner directly, so there is no failure case here right now. If we verify the owner exactly in future, then we'll have to take this into account. This was tested in terms of normal operation via xfstests - all of the fsr tests now pass without failure. however, we really need to modify xfs/227 to stress v3 inodes correctly to ensure we fully cover this case for v5 filesystems. In terms of recovery testing, I used a hacked version of xfs_fsr that held the temp inode open for a few seconds before exiting so that the filesystem could be shut down with an open owner change recovery flags set on at least the temp inode. fsr leaves the temp inode unlinked and in btree format, so this was necessary for the owner change to be reliably replayed. logprint confirmed the tmp inode in the log had the correct flag set: INO: cnt:3 total:3 a:0x69e9e0 len:56 a:0x69ea20 len:176 a:0x69eae0 len:88 INODE: #regs:3 ino:0x44 flags:0x209 dsize:88 ^^^^^ 0x200 is set, indicating a data fork owner change needed to be replayed on inode 0x44. A printk in the revoery code confirmed that the inode change was recovered: XFS (vdc): Mounting Filesystem XFS (vdc): Starting recovery (logdev: internal) recovering owner change ino 0x44 XFS (vdc): Version 5 superblock detected. This kernel L support enabled! Use of these features in this kernel is at your own risk! XFS (vdc): Ending recovery (logdev: internal) The script used to test this was: $ cat ./recovery-fsr.sh #!/bin/bash dev=/dev/vdc mntpt=/mnt/scratch testfile=$mntpt/testfile umount $mntpt mkfs.xfs -f -m crc=1 $dev mount $dev $mntpt chmod 777 $mntpt for i in `seq 10000 -1 0`; do xfs_io -f -d -c "pwrite $(($i * 4096)) 4096" $testfile > /dev/null 2>&1 done xfs_bmap -vp $testfile |head -20 xfs_fsr -d -v $testfile & sleep 10 /home/dave/src/xfstests-dev/src/godown -f $mntpt wait umount $mntpt xfs_logprint -t $dev |tail -20 time mount $dev $mntpt xfs_bmap -vp $testfile umount $mntpt $ Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-30 08:23:45 +08:00
XFS_ILOG_ABROOT | XFS_ILOG_TIMESTAMP | \
XFS_ILOG_DOWNER | XFS_ILOG_AOWNER)
static inline int xfs_ilog_fbroot(int w)
{
return (w == XFS_DATA_FORK ? XFS_ILOG_DBROOT : XFS_ILOG_ABROOT);
}
static inline int xfs_ilog_fext(int w)
{
return (w == XFS_DATA_FORK ? XFS_ILOG_DEXT : XFS_ILOG_AEXT);
}
static inline int xfs_ilog_fdata(int w)
{
return (w == XFS_DATA_FORK ? XFS_ILOG_DDATA : XFS_ILOG_ADATA);
}
/*
* Incore version of the on-disk inode core structures. We log this directly
* into the journal in host CPU format (for better or worse) and as such
* directly mirrors the xfs_dinode structure as it must contain all the same
* information.
*/
typedef struct xfs_ictimestamp {
__int32_t t_sec; /* timestamp seconds */
__int32_t t_nsec; /* timestamp nanoseconds */
} xfs_ictimestamp_t;
/*
* NOTE: This structure must be kept identical to struct xfs_dinode
* in xfs_dinode.h except for the endianness annotations.
*/
typedef struct xfs_icdinode {
__uint16_t di_magic; /* inode magic # = XFS_DINODE_MAGIC */
__uint16_t di_mode; /* mode and type of file */
__int8_t di_version; /* inode version */
__int8_t di_format; /* format of di_c data */
__uint16_t di_onlink; /* old number of links to file */
__uint32_t di_uid; /* owner's user id */
__uint32_t di_gid; /* owner's group id */
__uint32_t di_nlink; /* number of links to file */
__uint16_t di_projid_lo; /* lower part of owner's project id */
__uint16_t di_projid_hi; /* higher part of owner's project id */
__uint8_t di_pad[6]; /* unused, zeroed space */
__uint16_t di_flushiter; /* incremented on flush */
xfs_ictimestamp_t di_atime; /* time last accessed */
xfs_ictimestamp_t di_mtime; /* time last modified */
xfs_ictimestamp_t di_ctime; /* time created/inode modified */
xfs_fsize_t di_size; /* number of bytes in file */
xfs_drfsbno_t di_nblocks; /* # of direct & btree blocks used */
xfs_extlen_t di_extsize; /* basic/minimum extent size for file */
xfs_extnum_t di_nextents; /* number of extents in data fork */
xfs_aextnum_t di_anextents; /* number of extents in attribute fork*/
__uint8_t di_forkoff; /* attr fork offs, <<3 for 64b align */
__int8_t di_aformat; /* format of attr fork's data */
__uint32_t di_dmevmask; /* DMIG event mask */
__uint16_t di_dmstate; /* DMIG state info */
__uint16_t di_flags; /* random flags, XFS_DIFLAG_... */
__uint32_t di_gen; /* generation number */
/* di_next_unlinked is the only non-core field in the old dinode */
xfs_agino_t di_next_unlinked;/* agi unlinked list ptr */
/* start of the extended dinode, writable fields */
__uint32_t di_crc; /* CRC of the inode */
__uint64_t di_changecount; /* number of attribute changes */
xfs_lsn_t di_lsn; /* flush sequence */
__uint64_t di_flags2; /* more random flags */
__uint8_t di_pad2[16]; /* more padding for future expansion */
/* fields only written to during inode creation */
xfs_ictimestamp_t di_crtime; /* time created */
xfs_ino_t di_ino; /* inode number */
uuid_t di_uuid; /* UUID of the filesystem */
/* structure must be padded to 64 bit alignment */
} xfs_icdinode_t;
static inline uint xfs_icdinode_size(int version)
{
if (version == 3)
return sizeof(struct xfs_icdinode);
return offsetof(struct xfs_icdinode, di_next_unlinked);
}
/*
* Buffer Log Format defintions
*
* These are the physical dirty bitmap defintions for the log format structure.
*/
#define XFS_BLF_CHUNK 128
#define XFS_BLF_SHIFT 7
#define BIT_TO_WORD_SHIFT 5
#define NBWORD (NBBY * sizeof(unsigned int))
/*
* This flag indicates that the buffer contains on disk inodes
* and requires special recovery handling.
*/
#define XFS_BLF_INODE_BUF (1<<0)
/*
* This flag indicates that the buffer should not be replayed
* during recovery because its blocks are being freed.
*/
#define XFS_BLF_CANCEL (1<<1)
/*
* This flag indicates that the buffer contains on disk
* user or group dquots and may require special recovery handling.
*/
#define XFS_BLF_UDQUOT_BUF (1<<2)
#define XFS_BLF_PDQUOT_BUF (1<<3)
#define XFS_BLF_GDQUOT_BUF (1<<4)
/*
* This is the structure used to lay out a buf log item in the
* log. The data map describes which 128 byte chunks of the buffer
* have been logged.
*/
#define XFS_BLF_DATAMAP_SIZE ((XFS_MAX_BLOCKSIZE / XFS_BLF_CHUNK) / NBWORD)
typedef struct xfs_buf_log_format {
unsigned short blf_type; /* buf log item type indicator */
unsigned short blf_size; /* size of this item */
ushort blf_flags; /* misc state */
ushort blf_len; /* number of blocks in this buf */
__int64_t blf_blkno; /* starting blkno of this buf */
unsigned int blf_map_size; /* used size of data bitmap in words */
unsigned int blf_data_map[XFS_BLF_DATAMAP_SIZE]; /* dirty bitmap */
} xfs_buf_log_format_t;
/*
* All buffers now need to tell recovery where the magic number
* is so that it can verify and calculate the CRCs on the buffer correctly
* once the changes have been replayed into the buffer.
*
* The type value is held in the upper 5 bits of the blf_flags field, which is
* an unsigned 16 bit field. Hence we need to shift it 11 bits up and down.
*/
#define XFS_BLFT_BITS 5
#define XFS_BLFT_SHIFT 11
#define XFS_BLFT_MASK (((1 << XFS_BLFT_BITS) - 1) << XFS_BLFT_SHIFT)
enum xfs_blft {
XFS_BLFT_UNKNOWN_BUF = 0,
XFS_BLFT_UDQUOT_BUF,
XFS_BLFT_PDQUOT_BUF,
XFS_BLFT_GDQUOT_BUF,
XFS_BLFT_BTREE_BUF,
XFS_BLFT_AGF_BUF,
XFS_BLFT_AGFL_BUF,
XFS_BLFT_AGI_BUF,
XFS_BLFT_DINO_BUF,
XFS_BLFT_SYMLINK_BUF,
XFS_BLFT_DIR_BLOCK_BUF,
XFS_BLFT_DIR_DATA_BUF,
XFS_BLFT_DIR_FREE_BUF,
XFS_BLFT_DIR_LEAF1_BUF,
XFS_BLFT_DIR_LEAFN_BUF,
XFS_BLFT_DA_NODE_BUF,
XFS_BLFT_ATTR_LEAF_BUF,
XFS_BLFT_ATTR_RMT_BUF,
XFS_BLFT_SB_BUF,
XFS_BLFT_MAX_BUF = (1 << XFS_BLFT_BITS),
};
static inline void
xfs_blft_to_flags(struct xfs_buf_log_format *blf, enum xfs_blft type)
{
ASSERT(type > XFS_BLFT_UNKNOWN_BUF && type < XFS_BLFT_MAX_BUF);
blf->blf_flags &= ~XFS_BLFT_MASK;
blf->blf_flags |= ((type << XFS_BLFT_SHIFT) & XFS_BLFT_MASK);
}
static inline __uint16_t
xfs_blft_from_flags(struct xfs_buf_log_format *blf)
{
return (blf->blf_flags & XFS_BLFT_MASK) >> XFS_BLFT_SHIFT;
}
/*
* EFI/EFD log format definitions
*/
typedef struct xfs_extent {
xfs_dfsbno_t ext_start;
xfs_extlen_t ext_len;
} xfs_extent_t;
/*
* Since an xfs_extent_t has types (start:64, len: 32)
* there are different alignments on 32 bit and 64 bit kernels.
* So we provide the different variants for use by a
* conversion routine.
*/
typedef struct xfs_extent_32 {
__uint64_t ext_start;
__uint32_t ext_len;
} __attribute__((packed)) xfs_extent_32_t;
typedef struct xfs_extent_64 {
__uint64_t ext_start;
__uint32_t ext_len;
__uint32_t ext_pad;
} xfs_extent_64_t;
/*
* This is the structure used to lay out an efi log item in the
* log. The efi_extents field is a variable size array whose
* size is given by efi_nextents.
*/
typedef struct xfs_efi_log_format {
__uint16_t efi_type; /* efi log item type */
__uint16_t efi_size; /* size of this item */
__uint32_t efi_nextents; /* # extents to free */
__uint64_t efi_id; /* efi identifier */
xfs_extent_t efi_extents[1]; /* array of extents to free */
} xfs_efi_log_format_t;
typedef struct xfs_efi_log_format_32 {
__uint16_t efi_type; /* efi log item type */
__uint16_t efi_size; /* size of this item */
__uint32_t efi_nextents; /* # extents to free */
__uint64_t efi_id; /* efi identifier */
xfs_extent_32_t efi_extents[1]; /* array of extents to free */
} __attribute__((packed)) xfs_efi_log_format_32_t;
typedef struct xfs_efi_log_format_64 {
__uint16_t efi_type; /* efi log item type */
__uint16_t efi_size; /* size of this item */
__uint32_t efi_nextents; /* # extents to free */
__uint64_t efi_id; /* efi identifier */
xfs_extent_64_t efi_extents[1]; /* array of extents to free */
} xfs_efi_log_format_64_t;
/*
* This is the structure used to lay out an efd log item in the
* log. The efd_extents array is a variable size array whose
* size is given by efd_nextents;
*/
typedef struct xfs_efd_log_format {
__uint16_t efd_type; /* efd log item type */
__uint16_t efd_size; /* size of this item */
__uint32_t efd_nextents; /* # of extents freed */
__uint64_t efd_efi_id; /* id of corresponding efi */
xfs_extent_t efd_extents[1]; /* array of extents freed */
} xfs_efd_log_format_t;
typedef struct xfs_efd_log_format_32 {
__uint16_t efd_type; /* efd log item type */
__uint16_t efd_size; /* size of this item */
__uint32_t efd_nextents; /* # of extents freed */
__uint64_t efd_efi_id; /* id of corresponding efi */
xfs_extent_32_t efd_extents[1]; /* array of extents freed */
} __attribute__((packed)) xfs_efd_log_format_32_t;
typedef struct xfs_efd_log_format_64 {
__uint16_t efd_type; /* efd log item type */
__uint16_t efd_size; /* size of this item */
__uint32_t efd_nextents; /* # of extents freed */
__uint64_t efd_efi_id; /* id of corresponding efi */
xfs_extent_64_t efd_extents[1]; /* array of extents freed */
} xfs_efd_log_format_64_t;
/*
* Dquot Log format definitions.
*
* The first two fields must be the type and size fitting into
* 32 bits : log_recovery code assumes that.
*/
typedef struct xfs_dq_logformat {
__uint16_t qlf_type; /* dquot log item type */
__uint16_t qlf_size; /* size of this item */
xfs_dqid_t qlf_id; /* usr/grp/proj id : 32 bits */
__int64_t qlf_blkno; /* blkno of dquot buffer */
__int32_t qlf_len; /* len of dquot buffer */
__uint32_t qlf_boffset; /* off of dquot in buffer */
} xfs_dq_logformat_t;
/*
* log format struct for QUOTAOFF records.
* The first two fields must be the type and size fitting into
* 32 bits : log_recovery code assumes that.
* We write two LI_QUOTAOFF logitems per quotaoff, the last one keeps a pointer
* to the first and ensures that the first logitem is taken out of the AIL
* only when the last one is securely committed.
*/
typedef struct xfs_qoff_logformat {
unsigned short qf_type; /* quotaoff log item type */
unsigned short qf_size; /* size of this item */
unsigned int qf_flags; /* USR and/or GRP */
char qf_pad[12]; /* padding for future */
} xfs_qoff_logformat_t;
/*
* Disk quotas status in m_qflags, and also sb_qflags. 16 bits.
*/
#define XFS_UQUOTA_ACCT 0x0001 /* user quota accounting ON */
#define XFS_UQUOTA_ENFD 0x0002 /* user quota limits enforced */
#define XFS_UQUOTA_CHKD 0x0004 /* quotacheck run on usr quotas */
#define XFS_PQUOTA_ACCT 0x0008 /* project quota accounting ON */
#define XFS_OQUOTA_ENFD 0x0010 /* other (grp/prj) quota limits enforced */
#define XFS_OQUOTA_CHKD 0x0020 /* quotacheck run on other (grp/prj) quotas */
#define XFS_GQUOTA_ACCT 0x0040 /* group quota accounting ON */
/*
* Conversion to and from the combined OQUOTA flag (if necessary)
* is done only in xfs_sb_qflags_to_disk() and xfs_sb_qflags_from_disk()
*/
#define XFS_GQUOTA_ENFD 0x0080 /* group quota limits enforced */
#define XFS_GQUOTA_CHKD 0x0100 /* quotacheck run on group quotas */
#define XFS_PQUOTA_ENFD 0x0200 /* project quota limits enforced */
#define XFS_PQUOTA_CHKD 0x0400 /* quotacheck run on project quotas */
#define XFS_ALL_QUOTA_ACCT \
(XFS_UQUOTA_ACCT | XFS_GQUOTA_ACCT | XFS_PQUOTA_ACCT)
#define XFS_ALL_QUOTA_ENFD \
(XFS_UQUOTA_ENFD | XFS_GQUOTA_ENFD | XFS_PQUOTA_ENFD)
#define XFS_ALL_QUOTA_CHKD \
(XFS_UQUOTA_CHKD | XFS_GQUOTA_CHKD | XFS_PQUOTA_CHKD)
#define XFS_MOUNT_QUOTA_ALL (XFS_UQUOTA_ACCT|XFS_UQUOTA_ENFD|\
XFS_UQUOTA_CHKD|XFS_GQUOTA_ACCT|\
XFS_GQUOTA_ENFD|XFS_GQUOTA_CHKD|\
XFS_PQUOTA_ACCT|XFS_PQUOTA_ENFD|\
XFS_PQUOTA_CHKD)
/*
* Inode create log item structure
*
* Log recovery assumes the first two entries are the type and size and they fit
* in 32 bits. Also in host order (ugh) so they have to be 32 bit aligned so
* decoding can be done correctly.
*/
struct xfs_icreate_log {
__uint16_t icl_type; /* type of log format structure */
__uint16_t icl_size; /* size of log format structure */
__be32 icl_ag; /* ag being allocated in */
__be32 icl_agbno; /* start block of inode range */
__be32 icl_count; /* number of inodes to initialise */
__be32 icl_isize; /* size of inodes */
__be32 icl_length; /* length of extent to initialise */
__be32 icl_gen; /* inode generation number to use */
};
int xfs_log_calc_unit_res(struct xfs_mount *mp, int unit_bytes);
int xfs_log_calc_minimum_size(struct xfs_mount *);
#endif /* __XFS_LOG_FORMAT_H__ */